really properly move files

1 files changed, 0 insertions, 515 deletions

diff --git a/libdde-linux26/libdde_linux26/mk/Makeconf b/libdde-linux26/libdde_linux26/mk/Makeconf
deleted file mode 100644
index fa6474ae..00000000
--- a/libdde-linux26/libdde_linux26/mk/Makeconf
+++ /dev/null
@@ -1,515 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Make configuration file
-#
-# $Id: Makeconf 418 2008-11-12 03:50:31Z l4check $
-#
-# $Author: l4check $
-#
-# This file is included by all Makefile-templates. This file defines macros
-# for div commands, sets general DROPS-Makefile variables, ensures the
-# dependencies from the various Makeconf.locals, defines the messages for
-# div actions, and permits the dependency-creation on clean-rules.
-#
-# The macros BUILD_MULTIPLE_ARCHITECTURES and BUILD_ONE_ARCHITECTURE are
-# defined here.
-#
-# BUILD_MULTIPLE_ARCHITECTURES is set if ARCHS is set to multiple
-# architectures in the Makefile. If ARCHS is not set, the default value
-# l4_i386 will be assumed, not defining BUILD_MULTIPLE_ARCHITECTURES.
-# In the muli-arch case, binary.inc triggers build the files into subdirs,
-# dir-name is the architecture. Then, make is called recursively with ARCH
-# set to one architecture.
-#
-# BUILD_ONE_ARCHITECTURE is set if ARCH contains one architecture, and we
-# actually build files (in subdirs for multi-arch case, in the same dir in
-# the single-arch case).
-
-ifeq ($(origin _L4DIR_MK_MAKECONF),undefined)
-_L4DIR_MK_MAKECONF=y
-
-SYSTEMS = x86-l4v2
-ARCH = x86
-
-# the default target is all
-all::
-
-# make .general.d dependent on the role-file
-$(if $(ROLE),$(OBJ_DIR)/.general.d: $(L4DIR)/mk/$(ROLE))
-
-SYSTEM_TARGET	  = $(SYSTEM_TARGET_$(ARCH))
-SYSTEM_TARGET_arm = arm-linux-
-
-CARCHFLAGS_amd64  = -mno-red-zone
-ASFLAGS_amd64     = -m64
-
-LD_EMULATION_amd64= elf_x86_64
-LD_EMULATION_arm  = armelf
-LD_EMULATION_x86  = elf_i386
-LD_EMULATION      = $(LD_EMULATION_$(ARCH))
-
-OFORMAT_amd64     = elf64-x86-64
-OFORMAT_arm       = default
-OFORMAT_x86       = elf32-i386
-OFORMAT           = $(OFORMAT_$(ARCH))
-
-# This is quite bad: There is no other chance to disable the page-alignedment
-# of the linker. The linker aligns the first section at 0x100000 for AMD64!
-# We don't want this. Be careful for interactions with objcopy -S!
-LDNMAGIC           ?= -n
-LDFLAGS_amd64      += $(LDNMAGIC)
-
-CARCHFLAGS_x86_586        = -march=i586
-CARCHFLAGS_x86_pentium    = -march=i586
-CARCHFLAGS_x86_pentiummmx = -march=pentium-mmx
-CARCHFLAGS_x86_pentiumpro = -march=pentiumpro
-CARCHFLAGS_x86_686        = -march=i686
-CARCHFLAGS_x86_pentium2   = -march=pentium2
-CARCHFLAGS_x86_pentium3   = -march=pentium3
-CARCHFLAGS_x86_pentiumm   = -march=pentium-m
-CARCHFLAGS_x86_pentium4   = -march=pentium4
-CARCHFLAGS_x86_prescott   = -march=prescott
-CARCHFLAGS_x86_nocona     = -march=nocona
-CARCHFLAGS_x86_K6         = -march=k6
-CARCHFLAGS_x86_K7         = -march=athlon
-CARCHFLAGS_x86_athlon4    = -march=athlon-4
-CARCHFLAGS_x86_K8         = -march=k8
-CARCHFLAGS_x86_opteron    = -march=opteron
-
-IDL_SYSTEMS 	= x86-l4v2
-
-AR		= $(SYSTEM_TARGET)ar
-AS		= $(SYSTEM_TARGET)as
-AWKP		= gawk --posix
-CVS		= cvs -q
-SVN		= svn
-CP		= cp
-DICE_SRCDIR	?= $(L4DIR)/../dice
-DICE_OBJDIR	?= $(DICE_SRCDIR)
-DICE		= $(firstword $(wildcard $(DICE_OBJDIR)/src/dice \
-				$(DROPS_STDDIR)/tool/bin/dice \
-				 $(shell which dice 2>/dev/null) ) \
-				 did_not_find_dice___please_install_dice )
-DICE_CPP_NAME	= cpp0
-
-DICE_INCDIR	?= $(DICE_SRCDIR)/include
-
-ECHO		= echo
-
-GENOFFSETS	= $(L4DIR)/tool/bin/genoffsets.pl
-GOSH		= $(firstword $(wildcard $(L4DIR)/../tools/gosh/gosh \
-				$(DROPS_STDDIR)/tool/bin/gosh \
-				 $(shell which gosh 2>/dev/null) ) \
-				 did_not_find_gosh___please_install_gosh )
-HOST_CC		= gcc
-HOST_CXX	= g++
-INDENT		= indent -sob
-INSTALL		= install
-# the following two variables should be overwritten in Makeconf.bid.local
-LD		= $(SYSTEM_TARGET)ld
-LATEX		= latex
-PDFLATEX	= pdflatex
-GREP		= grep
-LN		= ln
-MKDIR		= mkdir -p
-MKFLAGS		+=$(MKFLAGS_$@)
-NM		= $(SYSTEM_TARGET)nm
-OBJCOPY		= $(SYSTEM_TARGET)objcopy
-PWDCMD		= sh -c pwd
-RANLIB		= $(SYSTEM_TARGET)ranlib
-RM		= rm -f
-SCRUB		= $(RM) $(wildcard *.old) $(wildcard *~) $(wildcard *.bak) \
-                        $(wildcard \#*\#)
-SED		= sed
-SHELL		= /bin/bash
-SIZE		= $(SYSTEM_TARGET)size
-STRIP		= $(SYSTEM_TARGET)strip
-TR		= tr
-GEN_DOPECODE	= $(L4DIR)/tool/gen_dopecode/gen_dopecode
-ABS2REL		= $(L4DIR)/tool/bin/abs2rel.sh
-# it's optional to be able to set it as environment variable
-FIASCOUX	?= $(L4DIR)/../kernel/fiasco/build-ux/fiasco
-DISASM_CMD      ?= $(SYSTEM_TARGET)objdump -ld $(1) | less
-
-# functions that are handy
-absfilename_target_dir_needs_to_exist = $(foreach w,$(1),$(addsuffix /$(notdir $(w)),$(shell cd $(dir $(w)) 2>/dev/null&&$(PWDCMD))))
-absfilename     = $(shell $(L4DIR)/mk/rel2abs.sh $(1))
-findfile	= $(firstword $(wildcard $(addsuffix /$(1),$(2))) $(1)_NOT_FOUND)
-
-# include this one early to be able to set OBJ_BASE
--include $(L4DIR)/Makeconf.local
-
-#ifeq ($(filter $(IGNORE_OBJDIR_TARGETS),$(MAKECMDGOALS)),)
-# output directory
-#ifeq ($(O)$(OBJ_BASE),)
-#$(error need to give builddir with O=.../builddir)
-#else
-#ifneq ($(O),)
-#ifeq ($(origin OBJ_BASE),undefined)
-#OBJ_BASE := $(call absfilename, $(O))
-#export OBJ_BASE
-#endif
-#endif
-#endif
-#endif
-
-ifeq ($(origin L4DIR_ABS),undefined)
-L4DIR_ABS      := $(call absfilename,$(L4DIR))
-endif
-ifeq ($(origin PKGDIR_ABS),undefined)
-PKGDIR_ABS     := $(call absfilename,$(PKGDIR))
-endif
-ifeq ($(origin SRC_DIR),undefined)
-SRC_DIR        := $(shell pwd)
-endif
-ifeq ($(origin SRC_BASE_ABS),undefined)
-SRC_BASE     ?= $(L4DIR)
-SRC_BASE_ABS := $(call absfilename,$(SRC_BASE))
-export SRC_BASE_ABS
-endif
-ifeq ($(origin OBJ_DIR),undefined)
-OBJ_DIR        := $(subst $(SRC_BASE_ABS),$(OBJ_BASE),$(SRC_DIR))
-endif
-ifeq ($(origin PKGDIR_OBJ),undefined)
-PKGDIR_OBJ     := $(call absfilename,$(OBJ_DIR)/$(PKGDIR))
-endif
-
-# if PKGDIR is not in L4DIR, we have an external package, so make up some
-# build-dir for it
-ifneq ($(patsubst $(L4DIR_ABS)/%,,$(PKGDIR_ABS)),)
-ifneq ($(filter-out $(OBJ_BASE)/ext-pkg%,$(PKGDIR_OBJ)),)
-PKGDIR_OBJ     := $(OBJ_BASE)/ext-pkg$(PKGDIR_OBJ)
-OBJ_DIR        := $(OBJ_BASE)/ext-pkg$(OBJ_DIR)
-endif
-endif
-
-# sanity check the object dir
-ifneq ($(SRC_BASE_ABS),$(OBJ_BASE))
-ifeq ($(SRC_DIR),$(OBJ_DIR))
-$(warning Sorry, your object or source path became garbled.)
-$(warning OBJ_BASE: $(OBJ_BASE))
-$(warning SRC_BASE_ABS: $(SRC_BASE_ABS))
-$(warning SRC_DIR: $(SRC_DIR))
-$(warning OBJ_DIR: $(OBJ_DIR))
-$(warning PKGDIR: $(PKGDIR))
-$(warning L4DIR_ABS: $(L4DIR_ABS))
-$(warning PKGDIR_ABS: $(PKGDIR_ABS))
-$(warning PKGDIR_OBJ: $(PKGDIR_OBJ))
-$(error Please investigate.)
-endif
-endif
-
-
-OBJ_DIR_EXPORT = $(OBJ_DIR)
-export OBJ_DIR_EXPORT
-
-VPATH_SRC_BASE ?= $(SRC_DIR)
-
-# Makeconf.local handling
-# dont use -include here, as we have special build conditions in $(L4DIR)/
-#ifeq ($(origin BID_ROOT_CONF),undefined)
-#BID_ROOT_CONF := $(call absfilename, $(OBJ_BASE))/Makeconf.bid.local
-#endif
-#ifeq ($(filter $(IGNORE_OBJDIR_TARGETS),$(MAKECMDGOALS)),)
-#ifeq ($(wildcard $(BID_ROOT_CONF)),)
-#ifeq ($(BID_IGN_ROOT_CONF),)
-#$(error No configuration file found in build directory "$(OBJ_BASE)". Please run "make O=/path/to/objdir config" in "$(L4DIR_ABS)" or specify a valid build directory)
-#endif
-#else
-#include $(BID_ROOT_CONF)
-#endif
-#endif
-
-#-include $(L4DIR)/Makeconf.$(CONFIG_LABEL)
-
-#-include $(OBJ_BASE)/Makeconf.local
-#ifneq ($(PKGDIR),)
-#-include $(PKGDIR)/Makeconf.local
-#endif
-# if it is not already set, we use this in the local dir
-MAKECONFLOCAL ?= Makeconf.local
--include $(MAKECONFLOCAL)
-
-DROPS_STDDIR	?= $(PKGDIR)/build
-ifeq ($(STATICFILE),)
-STATICFILE	= $(OBJ_BASE)/pkg/STATIC $(L4DIR)/pkg/STATIC
-endif
-
-# a nasty workaround for make-3.79/make-3.80. The former needs an additional
-# $$ for $-quotation when calling a function.
-BID_IDENT	= $(1)
-ifeq ($(call BID_IDENT,$$),)
-BID_DOLLARQUOTE	= $$
-endif
-BID_COMMA	= ,
-
-ifneq ($(PL),)
-PL_j := -j $(PL)
-export PL
-endif
-
-#include $(L4DIR)/mk/config.inc
-
-ifeq ($(HAVE_LDSO),y)
-# MAKEDEP-call:
-# arg1 - compiler binary name
-# arg2 - [opt] compiler target. Will be written as target within the
-# 	       dependency file
-# arg3 - [opt] name of the dependency file. If unset, .<arg2>.d will be used.
-# arg4 - [opt] alternative binary name
-ifeq ($(origin BID_LIBGENDEP), undefined)
-BID_LIBGENDEP := $(firstword $(wildcard $(call absfilename, \
-				$(OBJ_BASE)/tool/gendep/libgendep.so \
-				$(DROPS_STDDIR)/tool/lib/libgendep.so )))
-endif
-
-ifeq ($(HOST_SYSTEM),linux)
-	LD_PRELOAD = LD_PRELOAD
-endif
-ifeq ($(HOST_SYSTEM),darwin)
-	LD_PRELOAD = DYLD_FORCE_FLAT_NAMESPACE=1 DYLD_INSERT_LIBRARIES
-endif
-MAKEDEP=$(LD_PRELOAD)=$(BID_LIBGENDEP) GENDEP_TARGET=$(if $(2),$(2),$@) \
-		    GENDEP_BINARY=$(1) $(if $(3),GENDEP_DEPFILE=$(3)) \
-		    $(if $(4),GENDEP_BINARY_ALT1=$(4))
-endif
-
-# macros used here and in packages
-checkcc   = $(shell if $(CC) $(1) -o /dev/null -c -x c \
-                    /dev/null > /dev/null 2>&1; then echo "$(1)"; fi)
-checkcxx  = $(shell if $(CXX) $(1) -o /dev/null -c -x c++ \
-                    /dev/null > /dev/null 2>&1; then echo "$(1)"; fi)
-
-# the gcc specific variables: version, base dir, include dir, gcc lib
-# note: determining these variables is slow, and the values should
-#       be set in Makeconf.bid.local. However, this is the place were
-#       they are determined on a 'make config' in $(L4DIR)
-GCCVERSION_f	= $(shell $(CC) -dumpversion | sed -e 's/\(.*\)\..*/\1/')
-GCCMAJORVERSION_f=$(shell $(CC) -dumpversion | sed -e 's/\([^.]*\).*/\1/')
-GCCMINORVERSION_f=$(shell $(CC) -dumpversion | sed -e 's/[^.]*\.\([^.]*\).*/\1/')
-GCCSUBVERSION_f	= $(shell $(CC) -dumpversion | sed -e 's/.*\.\(.*\)/\1/')
-GCCDIR_f	= $(shell LC_ALL=C $(CC) -print-search-dirs|sed -ne 's+^install: \(.*[^/][^/]*\)/+\1+p' )
-GCCLIB_f	= $(shell $(CC) -print-libgcc-file-name)
-GCCLIB_EH_f	= $(filter /%,$(shell $(CC) -print-file-name=libgcc_eh.a))
-GCCINCDIR_f	= $(addprefix $(call GCCDIR_f),/include /include-fixed)
-GCCNOSTACKPROTOPT_f= $(call checkcc,-fno-stack-protector)
-
-GCCINCDIR	= $(GCCDIR)/include $(GCCDIR)/include-fixed
-I_GCCINCDIR	= $(addprefix -I,$(GCCINCDIR))
-
-ifneq ($(PKGDIR),)
-  ifeq ($(origin PKGNAME),undefined)
-    PKGNAME := $(notdir $(shell cd $(PKGDIR);pwd))
-  endif
-endif
-
-ifeq ($(V),1)
-  VERBOSE =
-endif
-ifeq ($(V),0)
-  VERBOSE = @
-endif
-
-# indicate if we are using dietlibc or uClibc
-ifeq ($(USE_DIETLIBC),y)
-# dietlibc explicitly set for all architectures
-  DEFINES	+= -DUSE_DIETLIBC=y
-  USE_DIETLIBC	= y
-  LIBC_TYPE	= diet
-  $(warning The use of dietlibc is deprecated, please switch to uclibc.)
-  $(warning Dietlibc will soon be removed from the tree.)
-else
-  # uClibc explicitly set for all architectures
-  DEFINES	+= #-DUSE_UCLIBC=y
-  USE_UCLIBC	= #y
-  LIBC_TYPE	= uc
-endif
-
-ifeq ($(RELEASE_MODE),y)
-DEFINES		+= -DL4BID_RELEASE_MODE
-endif
-
-ifeq ($(USE_TASKLIB),y)
-DEFINES		+= -DUSE_TASKLIB=y
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(RAM_BASE),)
-$(error RAM_BASE not given, needed for ARM architecture builds.)
-endif
-else #arch != arm
-  RAM_BASE	= 0x0
-endif
-
-DEFINES         += -DRAM_BASE=$(RAM_BASE)
-
-
-ifneq ($(filter linux l4linux host,$(MODE)),)
-HOST_LINK      := 1
-endif
-
-#
-# SUBDIR handling, not within the OBJ-*/ dirs
-#
-ifeq ($(SYSTEM),)
-ifneq ($(SUBDIRS),)
-.PHONY: $(SUBDIRS)
-$(SUBDIRS):
-	$(VERBOSE)PWD=$(PWD)/$@ $(MAKE) -C $@ all
-
-# we know that SUBDIRS isn't empty, hence we can avoid the dir-test
-scrub clean cleanall::
-	$(VERBOSE)set -e; $(foreach i,$(SUBDIRS), \
-		PWD=$(PWD)/$(i) $(MAKE) -C $(i) $@ $(MKFLAGS) $(MKFLAGS_$(i));)
-
-install:: $(SUBDIRS)
-	$(VERBOSE)set -e; $(foreach i,$(SUBDIRS), \
-		PWD=$(PWD)/$(i) $(MAKE) -C $(i) $@ $(MKFLAGS) $(MKFLAGS_$(i));)
-
-endif
-
-all:: $(OBJ_DIR)/Makefile
-
-$(OBJ_DIR)/Makefile: $(L4DIR)/mk/Makeconf
-	$(VERBOSE)install -d $(dir $@)
-	$(VERBOSE)echo '# automatically created -- modifications will be lost' > $@
-	$(VERBOSE)echo 'SRC := $(SRC_DIR)'                                    >> $@
-	$(VERBOSE)echo 'OBJ := $(OBJ_BASE)'                                   >> $@
-	$(VERBOSE)echo '.PHONY: x $$(MAKECMDGOALS)'                           >> $@
-	$(VERBOSE)echo 'x:'                                                   >> $@
-	$(VERBOSE)echo '	PWD=$$(SRC) $$(MAKE) -C $$(SRC) O=$$(OBJ)'    >> $@
-	$(VERBOSE)echo '$$(MAKECMDGOALS):'                                    >> $@
-	$(VERBOSE)echo '	PWD=$$(SRC) $$(MAKE) -C $$(SRC) O=$$(OBJ) $$@'>> $@
-
-else
-# we are within an OBJ-*/ dir, create dummy target
-$(SUBDIRS):
-endif
-
-#
-# Dependency section
-#
-#
-
-# the general dependencies: All generated files depend on ".general.d".
-# ".general.d" itself depends on the mk-Makeconf, the optional
-# Makeconf.local, the Makeconf.bid.local, the packet-Makeconf.local and the
-# Makeconf.local. This ensures a rebuilt if any of the configuration-
-# or make-files changes.
-#
-# We have this nasty if-readable-magic to allow the files to disappear
-# or to appear. Depending on if the according makeconf exists now, the
-# if-readable magic .general.d is used on existance or non-existence.
-
-BID_DEPEND_GENERAL_D_COND = \
-	if [ -r $(1) ] ; then echo -e '$@: $(1)\n$(1):\n' >>$@ ; \
-	  else echo '$$(if $$(wildcard $(1)), $@: FORCE)' >>$@; fi
-
-ifeq ($(SYSTEM),)
-GENERAL_D_LOC := $(OBJ_DIR)/.general.d
-else
-GENERAL_D_LOC := .general.d
-endif
-
-$(GENERAL_D_LOC): $(L4DIR)/mk/Makeconf
-	@$(BUILD_MESSAGE)
-	@install -d $(dir $@)
-	$(DEPEND_VERBOSE)echo '$@: $(SRC_DIR)/Makefile ' > $@
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(OBJ_BASE)/Makeconf.bid.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(OBJ_BASE)/Makeconf.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(L4DIR)/Makeconf.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(L4DIR)/Makeconf.$(CONFIG_LABEL))
-	$(if $(PKGDIR),$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(PKGDIR)/Makeconf.local))
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(MAKECONFLOCAL))
-
-DEPS	+= $(GENERAL_D_LOC)
-
-ifneq ($(DEPENDS_PKGS),)
-DEPENDS_PKGS_MISSING := $(strip $(foreach i,$(DEPENDS_PKGS),		\
-	                          $(if $(wildcard $(L4DIR)/pkg/$(i)),,$(i))))
-
-ifneq ($(DEPENDS_PKGS_MISSING),)
-# clear TARGET to prevent building anything
-TARGET =
-all::
-	@echo -e "\033[32mPackage dependencies missing: \033[1m$(DEPENDS_PKGS_MISSING)\033[22m, skipping.\033[0m"
-endif
-endif
-
-#
-# Messages
-#
-
-# set SHOWMESSAGES=true or 'y' to print textual action descriptions
-SHOWMESSAGES ?= true
-
-# coloring on color-capable terminals
-# enabled by setting BID_COLORED_PHASES to y
-ifeq ($(BID_COLORED_PHASES),y)
-ifeq ($(COLOR_TERMINAL),y)
-  EMPHSTART = '\033[34m'
-  EMPHSTOP  = '\033[0m'
-else
-  EMPHSTART =
-  EMPHSTOP  =
-endif
-endif
-
-
-ifneq (,$(filter y true, $(SHOWMESSAGES)))
-AR_MESSAGE?=	echo -e "  ==> Archiving into $@"
-BUILD_MESSAGE?=	echo -e "  ... Building $@"
-BUILT_MESSAGE?= echo -e $(EMPHSTART)'  ==> "$@" built'$(EMPHSTOP)
-COMP_MESSAGE?=	echo -e "  ... Compiling $@"
-COMP_P_MESSAGE?=echo -e "  ... Compiling PIC $@"
-COMP_PR_MESSAGE?=echo -e "  ... Compiling PROFILE $@"
-GEN_MESSAGE?=	echo -e "  ... Generating $@"
-LINK_MESSAGE?=	echo -e "  ==> Linking $@"
-LINK_SHARED_MESSAGE?=	echo -e "  ==> Linking to shared $@"
-LINK_PARTIAL_MESSAGE?= echo -e "  ==> Partial linking to $@"
-DEP_MESSAGE?=	echo -e "  ... Building dependencies for $<"
-CLEAN_MESSAGE?=	echo -e "  ... Removing created files"
-CLEANALL_MESSAGE?=echo -e "  ... Removing all created files"
-INSTALL_LINK_MESSAGE?=echo -e "  ==> Updating symlinks"
-INSTALL_DOC_MESSAGE?=echo -e "  ==> Installing $(<) documentation"
-INSTALL_DOC_LOCAL_MESSAGE?= echo -e "  ==> Installing $(<) documentation locally"
-INSTALL_MESSAGE?=echo -e "  ==> Installing $^"
-INSTALL_LOCAL_MESSAGE?=echo -e "  ==> Installing $(<) to local build-tree"
-UPDATE_HTML_MESSAGE?=echo -e "  ! You should remake your doc directory in $(1)"
-endif
-
-
-# allows an include $(DEPSVAR) at the end of the makefile
-# but prevents rebuilding them on a scrub, clean, cleanall and help
-ifneq ($(filter scrub clean cleanall help,$(MAKECMDGOALS)),)
-DEPSVAR	=
-else
-DEPSVAR	= $(DEPS)
-endif
-
-#
-# Some rules
-#
-
-# addfileheader-rule: allows "make addfileheader main.c server.c"-like
-# commands and automatically inserts the path within the package
-# options may be passed with $(ADDFILEHEADER_OPTIONS)
-ADDFILEHEADER_PREFIX = $(patsubst $(call absfilename,$(PKGDIR)/)%,\
-				  $(PKGNAME)/%,$(call absfilename,./))
-ADDFILEHEADER_FILES = $(filter-out addfileheader,$(MAKECMDGOALS))
-addfileheader:
-	addfileheader $(ADDFILEHEADER_OPTIONS) -p $(ADDFILEHEADER_PREFIX) $(ADDFILEHEADER_FILES)
-        
-
-.PHONY: FORCE
-
-endif	# _L4DIR_MK_MAKECONF undefined