really properly move files

37 files changed, 0 insertions, 4795 deletions

diff --git a/libdde-linux26/libdde_linux26/mk/Makeconf b/libdde-linux26/libdde_linux26/mk/Makeconf
deleted file mode 100644
index fa6474ae..00000000
--- a/libdde-linux26/libdde_linux26/mk/Makeconf
+++ /dev/null
@@ -1,515 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Make configuration file
-#
-# $Id: Makeconf 418 2008-11-12 03:50:31Z l4check $
-#
-# $Author: l4check $
-#
-# This file is included by all Makefile-templates. This file defines macros
-# for div commands, sets general DROPS-Makefile variables, ensures the
-# dependencies from the various Makeconf.locals, defines the messages for
-# div actions, and permits the dependency-creation on clean-rules.
-#
-# The macros BUILD_MULTIPLE_ARCHITECTURES and BUILD_ONE_ARCHITECTURE are
-# defined here.
-#
-# BUILD_MULTIPLE_ARCHITECTURES is set if ARCHS is set to multiple
-# architectures in the Makefile. If ARCHS is not set, the default value
-# l4_i386 will be assumed, not defining BUILD_MULTIPLE_ARCHITECTURES.
-# In the muli-arch case, binary.inc triggers build the files into subdirs,
-# dir-name is the architecture. Then, make is called recursively with ARCH
-# set to one architecture.
-#
-# BUILD_ONE_ARCHITECTURE is set if ARCH contains one architecture, and we
-# actually build files (in subdirs for multi-arch case, in the same dir in
-# the single-arch case).
-
-ifeq ($(origin _L4DIR_MK_MAKECONF),undefined)
-_L4DIR_MK_MAKECONF=y
-
-SYSTEMS = x86-l4v2
-ARCH = x86
-
-# the default target is all
-all::
-
-# make .general.d dependent on the role-file
-$(if $(ROLE),$(OBJ_DIR)/.general.d: $(L4DIR)/mk/$(ROLE))
-
-SYSTEM_TARGET	  = $(SYSTEM_TARGET_$(ARCH))
-SYSTEM_TARGET_arm = arm-linux-
-
-CARCHFLAGS_amd64  = -mno-red-zone
-ASFLAGS_amd64     = -m64
-
-LD_EMULATION_amd64= elf_x86_64
-LD_EMULATION_arm  = armelf
-LD_EMULATION_x86  = elf_i386
-LD_EMULATION      = $(LD_EMULATION_$(ARCH))
-
-OFORMAT_amd64     = elf64-x86-64
-OFORMAT_arm       = default
-OFORMAT_x86       = elf32-i386
-OFORMAT           = $(OFORMAT_$(ARCH))
-
-# This is quite bad: There is no other chance to disable the page-alignedment
-# of the linker. The linker aligns the first section at 0x100000 for AMD64!
-# We don't want this. Be careful for interactions with objcopy -S!
-LDNMAGIC           ?= -n
-LDFLAGS_amd64      += $(LDNMAGIC)
-
-CARCHFLAGS_x86_586        = -march=i586
-CARCHFLAGS_x86_pentium    = -march=i586
-CARCHFLAGS_x86_pentiummmx = -march=pentium-mmx
-CARCHFLAGS_x86_pentiumpro = -march=pentiumpro
-CARCHFLAGS_x86_686        = -march=i686
-CARCHFLAGS_x86_pentium2   = -march=pentium2
-CARCHFLAGS_x86_pentium3   = -march=pentium3
-CARCHFLAGS_x86_pentiumm   = -march=pentium-m
-CARCHFLAGS_x86_pentium4   = -march=pentium4
-CARCHFLAGS_x86_prescott   = -march=prescott
-CARCHFLAGS_x86_nocona     = -march=nocona
-CARCHFLAGS_x86_K6         = -march=k6
-CARCHFLAGS_x86_K7         = -march=athlon
-CARCHFLAGS_x86_athlon4    = -march=athlon-4
-CARCHFLAGS_x86_K8         = -march=k8
-CARCHFLAGS_x86_opteron    = -march=opteron
-
-IDL_SYSTEMS 	= x86-l4v2
-
-AR		= $(SYSTEM_TARGET)ar
-AS		= $(SYSTEM_TARGET)as
-AWKP		= gawk --posix
-CVS		= cvs -q
-SVN		= svn
-CP		= cp
-DICE_SRCDIR	?= $(L4DIR)/../dice
-DICE_OBJDIR	?= $(DICE_SRCDIR)
-DICE		= $(firstword $(wildcard $(DICE_OBJDIR)/src/dice \
-				$(DROPS_STDDIR)/tool/bin/dice \
-				 $(shell which dice 2>/dev/null) ) \
-				 did_not_find_dice___please_install_dice )
-DICE_CPP_NAME	= cpp0
-
-DICE_INCDIR	?= $(DICE_SRCDIR)/include
-
-ECHO		= echo
-
-GENOFFSETS	= $(L4DIR)/tool/bin/genoffsets.pl
-GOSH		= $(firstword $(wildcard $(L4DIR)/../tools/gosh/gosh \
-				$(DROPS_STDDIR)/tool/bin/gosh \
-				 $(shell which gosh 2>/dev/null) ) \
-				 did_not_find_gosh___please_install_gosh )
-HOST_CC		= gcc
-HOST_CXX	= g++
-INDENT		= indent -sob
-INSTALL		= install
-# the following two variables should be overwritten in Makeconf.bid.local
-LD		= $(SYSTEM_TARGET)ld
-LATEX		= latex
-PDFLATEX	= pdflatex
-GREP		= grep
-LN		= ln
-MKDIR		= mkdir -p
-MKFLAGS		+=$(MKFLAGS_$@)
-NM		= $(SYSTEM_TARGET)nm
-OBJCOPY		= $(SYSTEM_TARGET)objcopy
-PWDCMD		= sh -c pwd
-RANLIB		= $(SYSTEM_TARGET)ranlib
-RM		= rm -f
-SCRUB		= $(RM) $(wildcard *.old) $(wildcard *~) $(wildcard *.bak) \
-                        $(wildcard \#*\#)
-SED		= sed
-SHELL		= /bin/bash
-SIZE		= $(SYSTEM_TARGET)size
-STRIP		= $(SYSTEM_TARGET)strip
-TR		= tr
-GEN_DOPECODE	= $(L4DIR)/tool/gen_dopecode/gen_dopecode
-ABS2REL		= $(L4DIR)/tool/bin/abs2rel.sh
-# it's optional to be able to set it as environment variable
-FIASCOUX	?= $(L4DIR)/../kernel/fiasco/build-ux/fiasco
-DISASM_CMD      ?= $(SYSTEM_TARGET)objdump -ld $(1) | less
-
-# functions that are handy
-absfilename_target_dir_needs_to_exist = $(foreach w,$(1),$(addsuffix /$(notdir $(w)),$(shell cd $(dir $(w)) 2>/dev/null&&$(PWDCMD))))
-absfilename     = $(shell $(L4DIR)/mk/rel2abs.sh $(1))
-findfile	= $(firstword $(wildcard $(addsuffix /$(1),$(2))) $(1)_NOT_FOUND)
-
-# include this one early to be able to set OBJ_BASE
--include $(L4DIR)/Makeconf.local
-
-#ifeq ($(filter $(IGNORE_OBJDIR_TARGETS),$(MAKECMDGOALS)),)
-# output directory
-#ifeq ($(O)$(OBJ_BASE),)
-#$(error need to give builddir with O=.../builddir)
-#else
-#ifneq ($(O),)
-#ifeq ($(origin OBJ_BASE),undefined)
-#OBJ_BASE := $(call absfilename, $(O))
-#export OBJ_BASE
-#endif
-#endif
-#endif
-#endif
-
-ifeq ($(origin L4DIR_ABS),undefined)
-L4DIR_ABS      := $(call absfilename,$(L4DIR))
-endif
-ifeq ($(origin PKGDIR_ABS),undefined)
-PKGDIR_ABS     := $(call absfilename,$(PKGDIR))
-endif
-ifeq ($(origin SRC_DIR),undefined)
-SRC_DIR        := $(shell pwd)
-endif
-ifeq ($(origin SRC_BASE_ABS),undefined)
-SRC_BASE     ?= $(L4DIR)
-SRC_BASE_ABS := $(call absfilename,$(SRC_BASE))
-export SRC_BASE_ABS
-endif
-ifeq ($(origin OBJ_DIR),undefined)
-OBJ_DIR        := $(subst $(SRC_BASE_ABS),$(OBJ_BASE),$(SRC_DIR))
-endif
-ifeq ($(origin PKGDIR_OBJ),undefined)
-PKGDIR_OBJ     := $(call absfilename,$(OBJ_DIR)/$(PKGDIR))
-endif
-
-# if PKGDIR is not in L4DIR, we have an external package, so make up some
-# build-dir for it
-ifneq ($(patsubst $(L4DIR_ABS)/%,,$(PKGDIR_ABS)),)
-ifneq ($(filter-out $(OBJ_BASE)/ext-pkg%,$(PKGDIR_OBJ)),)
-PKGDIR_OBJ     := $(OBJ_BASE)/ext-pkg$(PKGDIR_OBJ)
-OBJ_DIR        := $(OBJ_BASE)/ext-pkg$(OBJ_DIR)
-endif
-endif
-
-# sanity check the object dir
-ifneq ($(SRC_BASE_ABS),$(OBJ_BASE))
-ifeq ($(SRC_DIR),$(OBJ_DIR))
-$(warning Sorry, your object or source path became garbled.)
-$(warning OBJ_BASE: $(OBJ_BASE))
-$(warning SRC_BASE_ABS: $(SRC_BASE_ABS))
-$(warning SRC_DIR: $(SRC_DIR))
-$(warning OBJ_DIR: $(OBJ_DIR))
-$(warning PKGDIR: $(PKGDIR))
-$(warning L4DIR_ABS: $(L4DIR_ABS))
-$(warning PKGDIR_ABS: $(PKGDIR_ABS))
-$(warning PKGDIR_OBJ: $(PKGDIR_OBJ))
-$(error Please investigate.)
-endif
-endif
-
-
-OBJ_DIR_EXPORT = $(OBJ_DIR)
-export OBJ_DIR_EXPORT
-
-VPATH_SRC_BASE ?= $(SRC_DIR)
-
-# Makeconf.local handling
-# dont use -include here, as we have special build conditions in $(L4DIR)/
-#ifeq ($(origin BID_ROOT_CONF),undefined)
-#BID_ROOT_CONF := $(call absfilename, $(OBJ_BASE))/Makeconf.bid.local
-#endif
-#ifeq ($(filter $(IGNORE_OBJDIR_TARGETS),$(MAKECMDGOALS)),)
-#ifeq ($(wildcard $(BID_ROOT_CONF)),)
-#ifeq ($(BID_IGN_ROOT_CONF),)
-#$(error No configuration file found in build directory "$(OBJ_BASE)". Please run "make O=/path/to/objdir config" in "$(L4DIR_ABS)" or specify a valid build directory)
-#endif
-#else
-#include $(BID_ROOT_CONF)
-#endif
-#endif
-
-#-include $(L4DIR)/Makeconf.$(CONFIG_LABEL)
-
-#-include $(OBJ_BASE)/Makeconf.local
-#ifneq ($(PKGDIR),)
-#-include $(PKGDIR)/Makeconf.local
-#endif
-# if it is not already set, we use this in the local dir
-MAKECONFLOCAL ?= Makeconf.local
--include $(MAKECONFLOCAL)
-
-DROPS_STDDIR	?= $(PKGDIR)/build
-ifeq ($(STATICFILE),)
-STATICFILE	= $(OBJ_BASE)/pkg/STATIC $(L4DIR)/pkg/STATIC
-endif
-
-# a nasty workaround for make-3.79/make-3.80. The former needs an additional
-# $$ for $-quotation when calling a function.
-BID_IDENT	= $(1)
-ifeq ($(call BID_IDENT,$$),)
-BID_DOLLARQUOTE	= $$
-endif
-BID_COMMA	= ,
-
-ifneq ($(PL),)
-PL_j := -j $(PL)
-export PL
-endif
-
-#include $(L4DIR)/mk/config.inc
-
-ifeq ($(HAVE_LDSO),y)
-# MAKEDEP-call:
-# arg1 - compiler binary name
-# arg2 - [opt] compiler target. Will be written as target within the
-# 	       dependency file
-# arg3 - [opt] name of the dependency file. If unset, .<arg2>.d will be used.
-# arg4 - [opt] alternative binary name
-ifeq ($(origin BID_LIBGENDEP), undefined)
-BID_LIBGENDEP := $(firstword $(wildcard $(call absfilename, \
-				$(OBJ_BASE)/tool/gendep/libgendep.so \
-				$(DROPS_STDDIR)/tool/lib/libgendep.so )))
-endif
-
-ifeq ($(HOST_SYSTEM),linux)
-	LD_PRELOAD = LD_PRELOAD
-endif
-ifeq ($(HOST_SYSTEM),darwin)
-	LD_PRELOAD = DYLD_FORCE_FLAT_NAMESPACE=1 DYLD_INSERT_LIBRARIES
-endif
-MAKEDEP=$(LD_PRELOAD)=$(BID_LIBGENDEP) GENDEP_TARGET=$(if $(2),$(2),$@) \
-		    GENDEP_BINARY=$(1) $(if $(3),GENDEP_DEPFILE=$(3)) \
-		    $(if $(4),GENDEP_BINARY_ALT1=$(4))
-endif
-
-# macros used here and in packages
-checkcc   = $(shell if $(CC) $(1) -o /dev/null -c -x c \
-                    /dev/null > /dev/null 2>&1; then echo "$(1)"; fi)
-checkcxx  = $(shell if $(CXX) $(1) -o /dev/null -c -x c++ \
-                    /dev/null > /dev/null 2>&1; then echo "$(1)"; fi)
-
-# the gcc specific variables: version, base dir, include dir, gcc lib
-# note: determining these variables is slow, and the values should
-#       be set in Makeconf.bid.local. However, this is the place were
-#       they are determined on a 'make config' in $(L4DIR)
-GCCVERSION_f	= $(shell $(CC) -dumpversion | sed -e 's/\(.*\)\..*/\1/')
-GCCMAJORVERSION_f=$(shell $(CC) -dumpversion | sed -e 's/\([^.]*\).*/\1/')
-GCCMINORVERSION_f=$(shell $(CC) -dumpversion | sed -e 's/[^.]*\.\([^.]*\).*/\1/')
-GCCSUBVERSION_f	= $(shell $(CC) -dumpversion | sed -e 's/.*\.\(.*\)/\1/')
-GCCDIR_f	= $(shell LC_ALL=C $(CC) -print-search-dirs|sed -ne 's+^install: \(.*[^/][^/]*\)/+\1+p' )
-GCCLIB_f	= $(shell $(CC) -print-libgcc-file-name)
-GCCLIB_EH_f	= $(filter /%,$(shell $(CC) -print-file-name=libgcc_eh.a))
-GCCINCDIR_f	= $(addprefix $(call GCCDIR_f),/include /include-fixed)
-GCCNOSTACKPROTOPT_f= $(call checkcc,-fno-stack-protector)
-
-GCCINCDIR	= $(GCCDIR)/include $(GCCDIR)/include-fixed
-I_GCCINCDIR	= $(addprefix -I,$(GCCINCDIR))
-
-ifneq ($(PKGDIR),)
-  ifeq ($(origin PKGNAME),undefined)
-    PKGNAME := $(notdir $(shell cd $(PKGDIR);pwd))
-  endif
-endif
-
-ifeq ($(V),1)
-  VERBOSE =
-endif
-ifeq ($(V),0)
-  VERBOSE = @
-endif
-
-# indicate if we are using dietlibc or uClibc
-ifeq ($(USE_DIETLIBC),y)
-# dietlibc explicitly set for all architectures
-  DEFINES	+= -DUSE_DIETLIBC=y
-  USE_DIETLIBC	= y
-  LIBC_TYPE	= diet
-  $(warning The use of dietlibc is deprecated, please switch to uclibc.)
-  $(warning Dietlibc will soon be removed from the tree.)
-else
-  # uClibc explicitly set for all architectures
-  DEFINES	+= #-DUSE_UCLIBC=y
-  USE_UCLIBC	= #y
-  LIBC_TYPE	= uc
-endif
-
-ifeq ($(RELEASE_MODE),y)
-DEFINES		+= -DL4BID_RELEASE_MODE
-endif
-
-ifeq ($(USE_TASKLIB),y)
-DEFINES		+= -DUSE_TASKLIB=y
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(RAM_BASE),)
-$(error RAM_BASE not given, needed for ARM architecture builds.)
-endif
-else #arch != arm
-  RAM_BASE	= 0x0
-endif
-
-DEFINES         += -DRAM_BASE=$(RAM_BASE)
-
-
-ifneq ($(filter linux l4linux host,$(MODE)),)
-HOST_LINK      := 1
-endif
-
-#
-# SUBDIR handling, not within the OBJ-*/ dirs
-#
-ifeq ($(SYSTEM),)
-ifneq ($(SUBDIRS),)
-.PHONY: $(SUBDIRS)
-$(SUBDIRS):
-	$(VERBOSE)PWD=$(PWD)/$@ $(MAKE) -C $@ all
-
-# we know that SUBDIRS isn't empty, hence we can avoid the dir-test
-scrub clean cleanall::
-	$(VERBOSE)set -e; $(foreach i,$(SUBDIRS), \
-		PWD=$(PWD)/$(i) $(MAKE) -C $(i) $@ $(MKFLAGS) $(MKFLAGS_$(i));)
-
-install:: $(SUBDIRS)
-	$(VERBOSE)set -e; $(foreach i,$(SUBDIRS), \
-		PWD=$(PWD)/$(i) $(MAKE) -C $(i) $@ $(MKFLAGS) $(MKFLAGS_$(i));)
-
-endif
-
-all:: $(OBJ_DIR)/Makefile
-
-$(OBJ_DIR)/Makefile: $(L4DIR)/mk/Makeconf
-	$(VERBOSE)install -d $(dir $@)
-	$(VERBOSE)echo '# automatically created -- modifications will be lost' > $@
-	$(VERBOSE)echo 'SRC := $(SRC_DIR)'                                    >> $@
-	$(VERBOSE)echo 'OBJ := $(OBJ_BASE)'                                   >> $@
-	$(VERBOSE)echo '.PHONY: x $$(MAKECMDGOALS)'                           >> $@
-	$(VERBOSE)echo 'x:'                                                   >> $@
-	$(VERBOSE)echo '	PWD=$$(SRC) $$(MAKE) -C $$(SRC) O=$$(OBJ)'    >> $@
-	$(VERBOSE)echo '$$(MAKECMDGOALS):'                                    >> $@
-	$(VERBOSE)echo '	PWD=$$(SRC) $$(MAKE) -C $$(SRC) O=$$(OBJ) $$@'>> $@
-
-else
-# we are within an OBJ-*/ dir, create dummy target
-$(SUBDIRS):
-endif
-
-#
-# Dependency section
-#
-#
-
-# the general dependencies: All generated files depend on ".general.d".
-# ".general.d" itself depends on the mk-Makeconf, the optional
-# Makeconf.local, the Makeconf.bid.local, the packet-Makeconf.local and the
-# Makeconf.local. This ensures a rebuilt if any of the configuration-
-# or make-files changes.
-#
-# We have this nasty if-readable-magic to allow the files to disappear
-# or to appear. Depending on if the according makeconf exists now, the
-# if-readable magic .general.d is used on existance or non-existence.
-
-BID_DEPEND_GENERAL_D_COND = \
-	if [ -r $(1) ] ; then echo -e '$@: $(1)\n$(1):\n' >>$@ ; \
-	  else echo '$$(if $$(wildcard $(1)), $@: FORCE)' >>$@; fi
-
-ifeq ($(SYSTEM),)
-GENERAL_D_LOC := $(OBJ_DIR)/.general.d
-else
-GENERAL_D_LOC := .general.d
-endif
-
-$(GENERAL_D_LOC): $(L4DIR)/mk/Makeconf
-	@$(BUILD_MESSAGE)
-	@install -d $(dir $@)
-	$(DEPEND_VERBOSE)echo '$@: $(SRC_DIR)/Makefile ' > $@
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(OBJ_BASE)/Makeconf.bid.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(OBJ_BASE)/Makeconf.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(L4DIR)/Makeconf.local)
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(L4DIR)/Makeconf.$(CONFIG_LABEL))
-	$(if $(PKGDIR),$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(PKGDIR)/Makeconf.local))
-	$(DEPEND_VERBOSE)$(call BID_DEPEND_GENERAL_D_COND,\
-		$(MAKECONFLOCAL))
-
-DEPS	+= $(GENERAL_D_LOC)
-
-ifneq ($(DEPENDS_PKGS),)
-DEPENDS_PKGS_MISSING := $(strip $(foreach i,$(DEPENDS_PKGS),		\
-	                          $(if $(wildcard $(L4DIR)/pkg/$(i)),,$(i))))
-
-ifneq ($(DEPENDS_PKGS_MISSING),)
-# clear TARGET to prevent building anything
-TARGET =
-all::
-	@echo -e "\033[32mPackage dependencies missing: \033[1m$(DEPENDS_PKGS_MISSING)\033[22m, skipping.\033[0m"
-endif
-endif
-
-#
-# Messages
-#
-
-# set SHOWMESSAGES=true or 'y' to print textual action descriptions
-SHOWMESSAGES ?= true
-
-# coloring on color-capable terminals
-# enabled by setting BID_COLORED_PHASES to y
-ifeq ($(BID_COLORED_PHASES),y)
-ifeq ($(COLOR_TERMINAL),y)
-  EMPHSTART = '\033[34m'
-  EMPHSTOP  = '\033[0m'
-else
-  EMPHSTART =
-  EMPHSTOP  =
-endif
-endif
-
-
-ifneq (,$(filter y true, $(SHOWMESSAGES)))
-AR_MESSAGE?=	echo -e "  ==> Archiving into $@"
-BUILD_MESSAGE?=	echo -e "  ... Building $@"
-BUILT_MESSAGE?= echo -e $(EMPHSTART)'  ==> "$@" built'$(EMPHSTOP)
-COMP_MESSAGE?=	echo -e "  ... Compiling $@"
-COMP_P_MESSAGE?=echo -e "  ... Compiling PIC $@"
-COMP_PR_MESSAGE?=echo -e "  ... Compiling PROFILE $@"
-GEN_MESSAGE?=	echo -e "  ... Generating $@"
-LINK_MESSAGE?=	echo -e "  ==> Linking $@"
-LINK_SHARED_MESSAGE?=	echo -e "  ==> Linking to shared $@"
-LINK_PARTIAL_MESSAGE?= echo -e "  ==> Partial linking to $@"
-DEP_MESSAGE?=	echo -e "  ... Building dependencies for $<"
-CLEAN_MESSAGE?=	echo -e "  ... Removing created files"
-CLEANALL_MESSAGE?=echo -e "  ... Removing all created files"
-INSTALL_LINK_MESSAGE?=echo -e "  ==> Updating symlinks"
-INSTALL_DOC_MESSAGE?=echo -e "  ==> Installing $(<) documentation"
-INSTALL_DOC_LOCAL_MESSAGE?= echo -e "  ==> Installing $(<) documentation locally"
-INSTALL_MESSAGE?=echo -e "  ==> Installing $^"
-INSTALL_LOCAL_MESSAGE?=echo -e "  ==> Installing $(<) to local build-tree"
-UPDATE_HTML_MESSAGE?=echo -e "  ! You should remake your doc directory in $(1)"
-endif
-
-
-# allows an include $(DEPSVAR) at the end of the makefile
-# but prevents rebuilding them on a scrub, clean, cleanall and help
-ifneq ($(filter scrub clean cleanall help,$(MAKECMDGOALS)),)
-DEPSVAR	=
-else
-DEPSVAR	= $(DEPS)
-endif
-
-#
-# Some rules
-#
-
-# addfileheader-rule: allows "make addfileheader main.c server.c"-like
-# commands and automatically inserts the path within the package
-# options may be passed with $(ADDFILEHEADER_OPTIONS)
-ADDFILEHEADER_PREFIX = $(patsubst $(call absfilename,$(PKGDIR)/)%,\
-				  $(PKGNAME)/%,$(call absfilename,./))
-ADDFILEHEADER_FILES = $(filter-out addfileheader,$(MAKECMDGOALS))
-addfileheader:
-	addfileheader $(ADDFILEHEADER_OPTIONS) -p $(ADDFILEHEADER_PREFIX) $(ADDFILEHEADER_FILES)
-        
-
-.PHONY: FORCE
-
-endif	# _L4DIR_MK_MAKECONF undefined
diff --git a/libdde-linux26/libdde_linux26/mk/WhatIsThis b/libdde-linux26/libdde_linux26/mk/WhatIsThis
deleted file mode 100644
index e64452d8..00000000
--- a/libdde-linux26/libdde_linux26/mk/WhatIsThis
+++ /dev/null
@@ -1,2 +0,0 @@
-# DROPS Building Makros
-filelist="*.mk *.inc config.*"
diff --git a/libdde-linux26/libdde_linux26/mk/binary.inc b/libdde-linux26/libdde_linux26/mk/binary.inc
deleted file mode 100644
index e35547f3..00000000
--- a/libdde-linux26/libdde_linux26/mk/binary.inc
+++ /dev/null
@@ -1,731 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Include for compiling templates (prog.mk, lib.mk)
-#
-# $Id: binary.inc 364 2008-05-29 02:51:17Z l4check $
-#
-# $Author: l4check $
-
-# Makefile-Include for binary and lib directories
-# Definitions for building the Makefile.inc, building dependencies,
-# compiler configuration.
-#
-# If SYSTEM is defined and we do not clean, we generate Makefile.inc. This file
-# holds the dependencies of the targets. Is also contains the definitions of
-# variables holding the objects of the related targets. In a multiple
-# architecture makefile, Makefile.inc will be built in arch-specific subdirs, 
-# like the other components built.
-#
-# Most compiler- and linker-flag variables are defined in such a way that
-# using them in the rule will expand all the target- and
-# architecture-specific definitions.
-#
-# The relink-rule is defined in this file.
-#
-# The dependencies for compiling files are defined here, the dep-files are
-# generated with names .(source-file).d for .c, .cc and .S-files.
-#
-# Clean-rules are defined here.
-#
-
-$(GENERAL_D_LOC): $(L4DIR)/mk/binary.inc
-
-# our default Makefile-name in the OBJ-Subdirs
-BID_OBJ_Makefile ?= Makefile
-
-ifeq ($(SYSTEM),) # if we have no system yet, build the subdirs
-#################################################################
-#
-# we have NO system defined in $(SYSTEM), we are in the src/ dir
-#
-#################################################################
-
-# our default system
-SYSTEMS	?= x86-l4v2
-
-# intersection with BUILD_SYSTEMS
-
-# filter the systems from the local SYSTEMS variable ($2), that match
-# the build-architecture.
-# args: $(1) - build architecture (one from BUILD_SYSTEMS)
-#       $(2) - SYSTEMS
-# 1. check, if both systems are the same (optionally reduced by the CPU)
-# 2. check, if at least the arch matches (and optionally the cpu)
-FILTER_SYSTEM = $(shell echo $(2)|$(AWKP) '\
-			BEGIN{m=s="$(1)";sub("_[^-]*","",m)}\
-			{for(i=1;i<=NF;i++){\
-			 	if(m==$$i||s==$$i){print s}else\
-			 	if(index(m,$$i)==1||index(s,$$i)==1)\
-			 		{t=s;sub("-.*","",t);print t}}}')
-
-# print that system of the SYSTEMS variable that actually matched with
-# $(BUILD_SYSTEMS) to the given system
-# args: $(1) - build architecture (SYSTEM)
-#       $(2) - SYSTEMS
-# + do nearly the same as in FILTER_SYSTEM, but additionally check if
-#   the resulting system matches $(1). If so, print the according pattern from
-#   SYSTEMS and exit
-BID_ORIG_SYSTEM = $(shell echo $(2)|$(AWKP) '\
-		    BEGIN{m=s="$(1)";sub("_[^-]*","",m)}\
-		    {for(i=1;i<=NF;i++){\
-		 	if(m==$$i||s==$$i){if(s=="$(1)"){print $$i;exit}};\
-		 	if(index(m,$$i)==1||index(s,$$i)==1)\
-			    {t=s;sub("-.*","",t);\
-                             if(t=="$(1)"){print $$i;exit}}}}')
-
-ifeq ($(ROLE),idl.mk)
-TARGET_SYSTEMS := $(sort $(foreach sys,$(sort \
-	$(shell echo $(BUILD_SYSTEMS)|$(SED) -e 's/_[^- ]*\(-\{0,1\}\)/\1/g')), \
-	$(call FILTER_SYSTEM,$(sys),$(SYSTEMS))))
-else
-TARGET_SYSTEMS := $(sort $(foreach sys,$(BUILD_SYSTEMS),\
-			$(call FILTER_SYSTEM,$(sys),$(SYSTEMS))))
-endif
-
-DIR_FROM_SUB = $(firstword $(addprefix ../,$(patsubst /%,,$(1))) $(1))
-SYSTEM_TO_ARCH = $(shell echo $(1)|$(SED) -e 's/[_-].*//')
-SYSTEM_TO_CPU = $(shell echo $(1)|$(SED) -ne 's/[^-_]*_\([^-]*\).*/\1/p')
-SYSTEM_TO_L4API = $(shell echo $(1)|$(SED) -ne 's/.*-\(.*\)/\1/p')
-
-$(foreach sys,$(TARGET_SYSTEMS),$(OBJ_DIR)/OBJ-$(sys)/$(BID_OBJ_Makefile)):$(OBJ_DIR)/OBJ-%/$(BID_OBJ_Makefile):$(OBJ_DIR)/.general.d
-	@install -d $(dir $@)
-	@echo 'L4DIR=$(L4DIR_ABS)'>$@
-	@echo 'OBJ_BASE=$(OBJ_BASE)'>>$@
-	@echo 'OBJ_DIR=$(OBJ_DIR)'>>$@
-	@echo 'SRC_DIR=$(SRC_DIR)'>>$@
-	@echo 'PKGDIR=$(PKGDIR_ABS)'>>$@
-	@echo 'PKGDIR_ABS=$(PKGDIR_ABS)'>>$@
-	@echo 'PKGDIR_OBJ=$(PKGDIR_OBJ)'>>$@
-	@echo 'MAKECONFLOCAL=$(SRC_DIR)/Makeconf.local'>>$@
-	@echo 'OSYSTEM=$(call BID_ORIG_SYSTEM,$*,$(SYSTEMS))'>>$@
-	@echo 'SYSTEM=$*'>>$@
-	@echo 'ARCH=$(call SYSTEM_TO_ARCH,$*)'>>$@
-	@echo 'CPU=$(call SYSTEM_TO_CPU,$*)'>>$@
-	@echo 'L4API=$(call SYSTEM_TO_L4API,$*)'>>$@
-	@echo 'vpath %.c $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.cc $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.cpp $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.S $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.y $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.l $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.ld $(VPATH_SRC_BASE)'>>$@
-	@echo 'vpath %.dpe $(VPATH_SRC_BASE)'>>$@
-	@echo '.general.d: $(SRC_DIR)/$(if $(wildcard Make.rules),Make.rules,Makefile)'>>$@
-	@echo 'include $(SRC_DIR)/$(if $(wildcard Make.rules),Make.rules,Makefile)'>>$@
-	@echo 'include $$(L4DIR)/mk/$(ROLE)'>>$@
-
-install relink scrub:: $(foreach arch,$(TARGET_SYSTEMS),\
-                                          $(OBJ_DIR)/OBJ-$(arch)/$(BID_OBJ_Makefile))
-	$(if $(TARGET_SYSTEMS),  $(VERBOSE)set -e ; \
-	    for d in $(TARGET_SYSTEMS) ; do \
-	    	PWD=$OBJ-$$d $(MAKE) -C $(OBJ_DIR)/OBJ-$$d -f $(BID_OBJ_Makefile) \
-			$@ ; done )
-
-.PHONY: pre-obj
-pre-obj::
-
-all:: $(foreach arch,$(TARGET_SYSTEMS), $(OBJ_DIR)/OBJ-$(arch))
-.PHONY: $(foreach arch,$(TARGET_SYSTEMS), $(OBJ_DIR)/OBJ-$(arch))
-$(foreach arch,$(TARGET_SYSTEMS), $(OBJ_DIR)/OBJ-$(arch)):%:%/$(BID_OBJ_Makefile) pre-obj
-	$(VERBOSE)PWD=$@ $(MAKE) $(PL_j) -C $@ -f $(BID_OBJ_Makefile)
-
-clean disasm::
-	$(if $(wildcard $(OBJ_DIR)/OBJ-*), $(VERBOSE)set -e ; \
-	    for d in $(wildcard $(OBJ_DIR)/OBJ-*) ; do \
-	        PWD=$$d $(MAKE) -C $$d -f $(BID_OBJ_Makefile) $@; \
-	    done, @true)
-
-cleanall::
-	$(VERBOSE)$(RM) -r $(wildcard $(OBJ_DIR))
-
-.PHONY: $(TARGET_SYSTEMS)
-
-else
-###############################################################
-#
-# we have a system defined in $(SYSTEM), we are in an OBJ- dir
-#
-###############################################################
-
-all::		$(TARGET)
-
-disasm: $(TARGET)
-	$(call DISASM_CMD,$<)
-
-L4INCDIR ?=	$(OBJ_BASE)/include/$(ARCH) \
-                $(OBJ_BASE)/include \
-#		$(addprefix $(OBJ_BASE)/include/$(ARCH)/,$(L4API)) \
-#               $(addprefix $(OBJ_BASE)/include/,$(L4API)) \
-#		$(DICE_INCDIR) \
-                $(addprefix $(DROPS_STDDIR)/include/$(ARCH)/,$(L4API)) \
-                $(addprefix $(DROPS_STDDIR)/include/,$(L4API)) \
-                $(DROPS_STDDIR)/include/$(ARCH) \
-                $(DROPS_STDDIR)/include
-L4LIBDIR ?=	$(addprefix $(OBJ_BASE)/lib/$(ARCH)_$(CPU)/,$(L4API)) \
-                $(OBJ_BASE)/lib/$(ARCH)_$(CPU) \
-                $(OBJ_BASE)/lib \
-                $(addprefix $(DROPS_STDDIR)/lib/$(ARCH)_$(CPU)/,$(L4API)) \
-                $(DROPS_STDDIR)/lib/$(ARCH)_$(CPU) \
-                $(DROPS_STDDIR)/lib
-
-L4LINUX22_DIR ?= $(L4DIR)/../linux22
-
-#
-# Variables Section
-#
-# There is a hierarchy on defining variables depending on the targets they
-# refer to: Most standard-Make Variables are supported. This includes
-# LDFLAGS	- options for ld, defined in prog.mk and lib.mk
-# CPPFLAGS	- options for the c preprocessor, included in CFLAGS
-# CFLAGS	- options for the c compiler
-# CXXFLAGS	- options for the c++ compiler
-# ASFLAGS	- options for the assembler
-#
-# Addtitionally, the following varibales are supported:
-# SRC_C, SRC_CC, SRC_S - .c, .cc, .S source files
-# CRT0, CRTN	- startup and finish code
-# LIBS		- additional libs to link (with -l), including paths (-L)
-# IDL		- interface definition files
-# TARGET	- targets to ge built
-#
-# These variables will be used for all operations with the corresponding
-# file types. More specific description is possible by using variables with
-# added specifications. These specifications include a referred element and
-# the architecture, both optional but in this order, separated by
-# underscores. The referred element for CPPFLAGS, CFLAGS, CXXFLAGS and
-# ASFLAGS is the source file. For the other variables, it is one of the
-# target files. The TARGET variable can only be postfixed by an
-# architecture.
-# The specific variables will be used for the target and the referred element
-# given in the name, additionally to the more general ones.
-#
-# Example for a valid specifications:
-# SRC_C_libxverbose.a = verbose.c   - ar's verbose.o into libxverbose.a, but
-#                                     not in other libs in the TARGET var.
-
-include $(L4DIR)/mk/modes.inc
-
-# select the variable specified in $(1) from the current architecture and
-# mode. Fall back to "all" architecture if no specific version exists.
-BID_mode_var= $(if $($(1)_$(ARCH)_$(MODE)),$($(1)_$(ARCH)_$(MODE)),$($(1)_all_$(MODE)))
-
-BID_SUPPORTED ?= $(call BID_mode_var,BID_SUPPORTED)
-ifneq ($(BID_SUPPORTED),y)
-$(error Mode "$(MODE)" is not supported for CPU architecture "$(ARCH)")
-endif
-
-LIBCINCDIR ?= $(call BID_mode_var,LIBCINCDIR)
-LIBCLIBDIR ?= $(call BID_mode_var,LIBCLIBDIR)
-LIBCLIBS   ?= $(call BID_mode_var,LIBCLIBS)
-L4LIBS     ?= $(call BID_mode_var,L4LIBS)
-CRT0	   ?= $(call BID_mode_var,CRT0)
-CRTP       ?= $(if $(filter $(CRT0_DEFAULT),$(CRT0)),$(CRTP_DEFAULT),$(CRT0))
-CRTN	   ?= $(call BID_mode_var,CRTN)
-LDSCRIPT   ?= $(call BID_mode_var,LDSCRIPT)
-
-# we do not need to put our FLAG-definitions into a special file if we can
-# use the target to parameterize it and if it needs not to appear in the deps 
-#CRT0	=  $(word 1, $(CRT0_$@_$(OSYSTEM)) $(CRT0_$@) $(CRT0_$(OSYSTEM)))
-#CRTN	=  $(word 1, $(CRTN_$@_$(OSYSTEM)) $(CRTN_$@) $(CRTN_$(OSYSTEM)))
-LIBS	+= $(strip $(LIBS_$(OSYSTEM)) $(LIBS_$@) $(LIBS_$@_$(OSYSTEM)))
-
-
-#LDFLAGS	+= $(strip $(LDFLAGS_$(OSYSTEM)) $(LDFLAGS_$(ARCH)) $(LDFLAGS_$@) $(LDFLAGS_$@_$(OSYSTEM)))
-
-# May 2007: force somewhat old hash-style as some(!, independant of the
-#           actual version) ld now use an other format, no uclibc upstream fix
-#           available yet, until available, we need:
-ifeq ($(LD_HAS_HASH_STYLE_OPTION),y)
-ifneq ($(HOST_LINK),1)
-LDFLAGS += --hash-style=sysv
-endif
-endif
-
-OPTS	?= -g -fno-strict-aliasing
-WARNINGS?= -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(WARNINGS_$@)
-
-ifeq ($(MODE),host)
-# never cross compile in host mode
-SYSTEM_TARGET = 
-CC            = $(HOST_CC)
-CXX           = $(HOST_CXX)
-else
-# no architecture specific flags in host mode
-OPTS	+= $(CARCHFLAGS_$(ARCH)) $(CARCHFLAGS_$(ARCH)_$(CPU))
-endif
-
-# no link address if build a lib or we're compiling a host program and using
-# the host linker scripts
-ifeq ($(ROLE),lib.mk)
-NO_DEFAULT_RELOC := y
-endif
-ifneq ($(HOST_LINK),)
-NO_DEFAULT_RELOC := y
-endif
-
-default_reloc_base = $(firstword $(DEFAULT_RELOC_$(1)) \
-                                 $(DEFAULT_RELOC_$(ARCH)) \
-                                 $(DEFAULT_RELOC) \
-                                 $(if $(NO_DEFAULT_RELOC),,0x01000000))
-default_reloc = $(if $(call default_reloc_base,$(1)),\
-                     $(shell printf "0x%x" $$(($(RAM_BASE) + $(call default_reloc_base,$(1))))),)
-
-$(CLIENTIDL:.idl=-client.o): CFLAGS += -ffunction-sections
-CFLAGS	+= $(BID_CFLAGS_GSTAB) $(BID_CFLAGS_OMIT_FP)
-CFLAGS	+= $(CFLAGS_$(OSYSTEM)) $(CFLAGS_$(<F)) $(CFLAGS_$(<F)_$(OSYSTEM))
-CFLAGS  += $(CFLAGS_$(L4API))
-CFLAGS	+= $(OPTS) $(WARNINGS)
-CFLAGS  += -fno-common
-ifneq ($(MODE),host)
-CFLAGS  += $(GCCNOSTACKPROTOPT)
-endif
-DEFINES += $(DEFINES_$(OSYSTEM)) $(DEFINES_$(<F)) $(DEFINES_$(<F)_$(OSYSTEM))
-DEFINES += -DSYSTEM_$(subst -,_,$(SYSTEM)) -DARCH_$(ARCH) -DCPUTYPE_$(CPU) -DL4API_$(L4API)
-ifdef DEBUG
-ifeq (,$(filter 0 n N, $(DEBUG)))
-DEFINES	+= -DDEBUG
-endif
-endif
-
-CPPFLAGS+= $(CPPFLAGS_$(OSYSTEM)) $(CPPFLAGS_$(<F)) $(CPPFLAGS_$(<F)_$(OSYSTEM))
-# defined in mk/Makeconf and this file.
-CPPFLAGS+= $(DEFINES)
-CPPFLAGS+= $(BID_CPPFLAGS_SYSCALLS)
-CPPFLAGS+= $(addprefix -I, $(PRIVATE_INCDIR) $(PRIVATE_INCDIR_$(OSYSTEM)) $(PRIVATE_INCDIR_$@) $(PRIVATE_INCDIR_$@_$(OSYSTEM)))
-CPPFLAGS+= -I.
-#CPPFLAGS+= $(if $(CLIENTIDL)$(SERVERIDL)$(addprefix CLIENTIDL_,$(TARGET))$(addprefix SERVERIDL_,$(TARGET)),$(addprefix -I, $(IDL_PATH)))
-ifneq ($(MODE),host)
-CPPFLAGS+= $(addprefix -I, $(L4INCDIR))
-endif
-CPPFLAGS+= $(LIBCINCDIR)
-
-CXXFLAGS+= $(BID_CFLAGS_GSTAB) $(BID_CFLAGS_OMIT_FP)
-CXXFLAGS+= $(CXXFLAGS_$(OSYSTEM))
-CXXFLAGS+= $(CXXFLAGS_$(@:.o=.cc))  $(CXXFLAGS_$(@:.o=.cc)_$(OSYSTEM))
-CXXFLAGS+= $(CXXFLAGS_$(@:.o=.cpp)) $(CXXFLAGS_$(@:.o=.cpp)_$(OSYSTEM))
-CXXFLAGS+= $(OPTS) $(filter-out -Wmissing-declarations -Wstrict-prototypes -Wmissing-prototypes,$(WARNINGS))
-CXXFLAGS+= -fno-common
-ifneq ($(MODE),host)
-CXXFLAGS+= $(GCCNOSTACKPROTOPT)
-endif
-
-PICFLAGS = -fPIC -U__PIC__ -D__PIC__=1
-
-ASFLAGS+= $(ASFLAGS_$(ARCH)) $(ASFLAGS_$(@:.o=.S)) $(ASFLAGS_$(@:.o=.S)_$(OSYSTEM))
-OBJS	+= $(strip $(OBJS_$(OSYSTEM)) $(OBJS_$@) $(OBJS_$@_$(OSYSTEM)))
-ALLOBJS	= $(OBJS) $(foreach target,$(TARGET) $(TARGET_$(OSYSTEM)),\
-		$(OBJS_$(target)) $(OBJS_$(target)_$(OSYSTEM)))
-ALLDPI = $(sort $(foreach obj,$(ALLOBJS),$(patsubst %.dpe,%.dpi,\
-		$(DPE_$(obj:.o=.c)))))
-
-# implementation of $(CLIENTIDL) and $(SERVERIDL)
-IDL_TYPE   ?= dice
-IDL_PKGDIR ?= $(PKGDIR_OBJ)
-IDL_PATH   ?= $(addsuffix /idl/OBJ-$(ARCH)-$(L4API),$(IDL_PKGDIR))
-ifneq ($(IDL_TYPE), dice)
-ifneq ($(IDL_TYPE), corba)
-$(error IDL_TYPE "$(IDL_TYPE)" not supported.)
-endif
-endif
-
-# A function to deliver the source files generated from IDL-files and
-# that should be linked to a given target. Used by "targetobjs" to write
-# the target-objects and in the "Makefile.inc:"-rule to write the IDL_SRC_C-
-# variables
-# arg: 1 - target
-IDL_SRC_Cfn = $(CLIENTIDL:.idl=-client.c) $(SERVERIDL:.idl=-server.c)	\
-	      $(foreach inter, $(OSYSTEM) $(1) $(1)_$(OSYSTEM),		\
-			$(CLIENTIDL_$(inter):.idl=-client.c)		\
-			$(SERVERIDL_$(inter):.idl=-server.c))
-IDL_SRC_CCfn = $(CLIENTIDL:.idl=-client.cc) $(SERVERIDL:.idl=-server.cc) \
-	      $(foreach inter, $(OSYSTEM) $(1) $(1)_$(OSYSTEM),		\
-			$(CLIENTIDL_$(inter):.idl=-client.cc)		\
-			$(SERVERIDL_$(inter):.idl=-server.cc))
-
-# *all* CLIENTIDLs/SERVERIDLs
-# needed for the test if we should include the IDL-Path into vpath
-IDL_ALLCLIENTIDL = $(CLIENTIDL) $(CLIENTIDL_$(OSYSTEM))			\
-		   $(foreach target,$(TARGET) $(TARGET_$(OSYSTEM)),	\
-		      $(CLIENTIDL_$(target)) $(CLIENTIDL_$(target)_$(OSYSTEM)))
-IDL_ALLSERVERIDL = $(SERVERIDL) $(SERVERIDL_$(OSYSTEM)) 		\
-		   $(foreach target,$(TARGET) $(TARGET_$(OSYSTEM)),	\
-		      $(SERVERIDL_$(target)) $(SERVERIDL_$(target)_$(OSYSTEM)))
-
-ifneq ($(IDL_ALLCLIENTIDL),)
-vpath %-client.c $(IDL_PATH)
-vpath %-client.cc $(IDL_PATH)
-endif
-ifneq ($(IDL_ALLSERVERIDL),)
-vpath %-server.c $(IDL_PATH)
-vpath %-server.cc $(IDL_PATH)
-endif
-
-
-# a helper function to generate the object-files for a given target
-# arg: 1 - target
-#      2 - infix between the basename and the .o
-targetobjs = $(SRC_C:.c=$(2).o) $(SRC_S:.S=$(2).o)                     	\
-	     $(patsubst %.cc,%$(2).o,$(patsubst %.cpp,%.cc,$(SRC_CC)))	\
-	     $(foreach inter, $(OSYSTEM) $(1) $(1)_$(OSYSTEM),		\
-			$(SRC_C_$(inter):.c=$(2).o)			\
-			$(SRC_S_$(inter):.S=$(2).o)			\
-			$(patsubst %.cc,%$(2).o,$(SRC_CC_$(inter):.cpp=.cc)) \
-			$($(SRC_CC_$(inter):.cpp=.cc):%.cc=$(2).o))	\
-	     $(patsubst %.c,%$(2).o,$(call IDL_SRC_Cfn,$(1)))
-
-# The directories our object files will go into. These dirs will be created
-# on generation of Makefile.inc in the OBJ- dirs.
-OBJDIRS = $(strip $(sort $(filter-out ./,$(dir 				\
-		$(foreach t,$(TARGET_STANDARD),				\
-			$(call targetobjs,$(t),))			\
-		$(foreach t,$(TARGET_PIC) $(TARGET_SHARED),		\
-			$(call targetobjs,$(t),.s))			\
-		$(foreach t,$(PROFILE),					\
-			$(call targetobjs,$(t),.pr))			\
-		$(foreach t,$(TARGET_PROFILE_PIC) $(TARGET_PROFILE_SHARED),\
-		$(call targetobjs,$(t),.pr.s))))))
-
-# The include file for the Makefile. This file contains definitions and
-# dependencies which are dynamically generated. Unfortunately, make does
-# not support variable declarations using the foreach function. Same
-# for rules.
-$(BID_OBJ_Makefile).inc: .general.d
-	@$(BUILD_MESSAGE)
-	@$(ECHO) "# automatically generated, do not edit!" >$@_
-        # write helper variables containing the IDL-C-Sources
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\nIDL_SRC_C_$(target)=$(call IDL_SRC_Cfn,$(target))))'>>$@_
-        # and add them to SRC_C
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\nSRC_C_$(target) += $$(IDL_SRC_C_$(target))))'>>$@_
-        # but set the variables empty for the current rule
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\n$(BID_OBJ_Makefile).inc: IDL_SRC_C_$(target)=))'>>$@_
-        # write helper variables containing the IDL-C++-Sources
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\nIDL_SRC_CC_$(target)=$(call IDL_SRC_CCfn,$(target))))'>>$@_
-        # and add them to SRC_CC
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\nSRC_CC_$(target) += $$(IDL_SRC_CC_$(target))))'>>$@_
-        # but set the variables empty for the current rule
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET),		\
-		\n$(BID_OBJ_Makefile).inc: IDL_SRC_CC_$(target)=))'>>$@_
-        # write the object declaration variables
-        # TARGET_{STANDARD, PIC, SHARED} contain the appropriate targets
-        # TARGET_PROFILE_{STANDARD, PIC, SHARED} as well
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET_STANDARD),	\
-		\nOBJS_$(target) += $(call targetobjs,$(target),)))' >>$@_
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET_PIC)		\
-					      $(TARGET_SHARED),		\
-		\nOBJS_$(target) += $(call targetobjs,$(target),.s)))' >>$@_
-	@$(ECHO) -en '$(strip $(foreach target,$(TARGET_PROFILE),	\
-		\nOBJS_$(target) += $(call targetobjs,$(target),.pr)))' >>$@_
-	@$(ECHO) -e '$(strip $(foreach target,$(TARGET_PROFILE_PIC)	\
-				$(TARGET_PROFILE_SHARED),		\
-		\nOBJS_$(target) += $(call targetobjs,$(target),.pr.s)))' >>$@_
-        #
-        # write the dpe-dependencies
-	@$(ECHO) -e '$(foreach obj,$(sort 				\
-		$(foreach t,$(TARGET_STANDARD),$(call targetobjs,$t))	\
-		$(foreach t,$(TARGET_PIC) $(TARGET_SHARED),		\
-			$(call targetobjs,$t,.s))			\
-		$(foreach t,$(TARGET_PROFILE),$(call targetobjs,$t,.pr)) \
-		$(foreach t,$(TARGET_PROFILE_PIC) $(TARGET_PROFILE_SHARED),\
-			$(call targetobjs,$t,.pr.s))),$(strip		\
-		$(addprefix \n$(obj): ,$(patsubst %.dpe,%.dpi,		\
-		$(DPE_$(obj:.o=.c)) $(DPE_$(obj:.o=.cc))		\
-		$(DPE_$(obj:.s.o=.c)) $(DPE_$(obj:.s.o=.cc))		\
-		$(DPE_$(obj:.pr.o=.c)) $(DPE_$(obj:.pr.o=.cc))		\
-		$(DPE_$(obj:.pr.s.o=.c)) $(DPE_$(obj:.pr.s.o=.cc))	\
-		))))' >>$@_
-        #
-        # create the object-dirs
-	@$(if $(OBJDIRS), $(VERBOSE)set -e; for d in $(OBJDIRS); do	\
-		[ -d "$$d" ] || $(MKDIR) $$d; done )
-
-        #
-        # write the object-dependencies for the targets
-	@$(ECHO) -e '$(foreach target,$(TARGET),$(strip\
-	          \n$(target): $$(OBJS_$(target)) ))' >> $@_
-        # make the target dependent on '.general.d'
-	@$(ECHO) -e '$(foreach target,$(TARGET),$(strip			\
-	          \n$$(OBJS_$(target)): .general.d))'			\
-		>> $@_
-        # Using LDSO does not need a RELOC address, so omit the following in
-        # this case
-ifneq ($(MODE),loader)
-        # in case of a binary, write the link address
-        # the dependency to the static file: If DEFAULT_RELOC is set,
-        # all targets are made dependent on the STATIC file
-        # (defined in Makeconf).
-        # If DEFAULT_RELOC_xxx is set, xxx is made dependent on the
-        # STATIC file.
-ifneq ($(strip $(foreach target,$(TARGET), $(call default_reloc,$(target)))),)
-ifneq ($(filter l4linux host,$(MODE)),)
-	$(error DEFAULT_RELOC must not be set if MODE is l4linux or host)
-endif
-        # the relocatable binaries depend on Makefile.inc
-	@$(ECHO) -e '\n$(strip						 \
-		$(foreach target, $(TARGET),				 \
-			$(if $(call default_reloc,$(target)),$(target))) \
-		: $@)' >>$@_
-ifneq ($(wildcard $(STATICFILE)),)
-        # Makefile.inc depends on STATIC
-	@$(ECHO) -e '\n$@: $(firstword $(wildcard $(STATICFILE)))' >>$@_
-        # we find out the relocation address here.
-	@$(ECHO) -e '$(foreach target, $(TARGET),$(strip		\
-		\nLDFLAGS_$(target)+= -Ttext=$(firstword		\
-			$(shell $(AWKP) -v prog=$(target)		\
-				"/^[^\#]/{if(\$$2==prog){print $$1; exit}}" \
-				< $(firstword $(wildcard $(STATICFILE)))) \
-			$(call default_reloc,$(target)))))'	\
-		>>$@_
-        # and the dummy-rule to rebuild myself if STATIC disappears
-	@$(ECHO) -e '\n$(firstword $(wildcard $(STATICFILE))): ' >>$@_
-else
-        # STATIC does not exist. rebuild myself if STATIC appears
-	@$(ECHO) -e '\n$$(if $$(wildcard $(STATICFILE)), $@: FORCE)'	\
-		>>$@_
-        # we find out the relocation address here.
-	@$(ECHO) -e '$(foreach target, $(TARGET),$(strip		\
-		\nLDFLAGS_$(target)+= -Ttext=$(firstword		\
-			$(call default_reloc,$(target)))))'	\
-		>>$@_
-endif # STATIC file
-endif
-endif # MODE != loader
-	@mv $@_ $@
-
-ifeq ($(filter scrub help,$(MAKECMDGOALS)),)
--include $(BID_OBJ_Makefile).inc
-endif
-
-#
-# Rules Section
-#
-
-# the default target "all" ensures building of the targets. When multiple
-# architectures are used, the targets are build in subdirs.
-
-# the relink-rule: make the TARGETs phony. Specification of build-targets 
-# in MAKECMDGOALS is not allowed. Possibility: TARGET=
-#
-ifneq ($(filter relink,$(MAKECMDGOALS)),)
-.PHONY: $(TARGET)
-relink: all
-endif
-
-
-
-###
-#
-# Compilation rules with dependency-generation
-#
-# If we have ld.so, we use it to create our dependencies (see MAKEDEP
-# definition). Otherwise, we fall back to whatever we need. For
-# compilation with gcc, this is using "-MD" and postprocessing the
-# generated files.
-
-ifeq ($(HAVE_LDSO),)
-LIBDEPS = $(foreach file, \
-                    $(patsubst -l%,lib%.a,$(filter-out -L%,$(LDFLAGS))) \
-                    $(patsubst -l%,lib%.so,$(filter-out -L%,$(LDFLAGS))),\
-                    $(word 1, $(foreach dir, \
-                           $(patsubst -L%,%,\
-                           $(filter -L%,$(LDFLAGS) $(L4ALL_LIBDIR))),\
-                      $(wildcard $(dir)/$(file)))))
-
-DEPEND_EXTEND_CMD = $(AWKP) '			\
-/^[^:]*: ..*/{					\
-	while(sub("\\\\$$","")){		\
-		getline nextline ;		\
-		$$0=$$0 " " nextline		\
-	}					\
-	split($$0,field,": ");			\
-	sub("^$(*F).o","$*.s $*.i $@",field[1]);	\
-	nr=split(field[2],deps) ;		\
-	for(i=1;i<=nr;){			\
-	  printf("ifeq ($$(shell test y \\\n");	\
-	  for(j=0; j<100 && i+j<=nr; j++){	\
-	    printf("-a -r %s \\\n", deps[i+j]);	\
-	  }					\
-	  printf("&& echo y),)");		\
-	  printf("\n%s: FORCE\nelse\n%s: $(BID_OBJ_Makefile) \\\n",	\
-	  	field[1],field[1]);		\
-	  for(j=0; j<100 && i+j<=nr; j++){	\
-	    printf("%s \\\n",deps[i+j]);	\
-	  }					\
-	  printf("\nendif\n");			\
-	  i+=j;					\
-	}					\
-}'
-DEPEND_EXTEND_FUNC = ( $(DEPEND_EXTEND_CMD) < $(1) > $(2).new && rm -f $(1) && mv $(2).new $(2) ) || ( rm -f $(1) $(2).new $(2) ; $(DEPEND_IGNORE_ERRORS) )
-DEPEND_FLAG = -MD
-
-.PHONY: FORCE
-endif # HAVE_LDSO empty
-
-%.o:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.s.o:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.o:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.s.o: %.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.o:	%.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.s.o:	%.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.o:	%.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.s.o: %.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CXX_NAME)) $(CXX) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.o:	%.c
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.s.o:	%.c
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.o:	%.c
-	@$(COMP_PR_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.s.o: %.c
-	@$(COMP_PR_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(CFLAGS) $(PICFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.o:	%.S
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(ASFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.s.o:	%.S
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(ASFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.o:	%.S
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(ASFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.pr.s.o:	%.S
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_CPP_NAME)) $(CC) -c $(DEPEND_FLAG) $(CPPFLAGS) $(ASFLAGS) $(PICFLAGS) -DPROFILE -pg $(call absfilename,$<) -o $@
-	$(DEPEND_VERBOSE)$(call DEPEND_EXTEND_FUNC, $(*F).d, $(dir $@).$(notdir $@).d)
-
-%.c:	%.y
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(YACC) $(YFLAGS) $(call absfilename,$<)
-	$(VERBOSE)mv -f y.tab.c $@
-	$(VERBOSE)if [ -f y.tab.h ]; then mv -f y.tab.h $(@:.c=.h); fi
-
-%.c:	%.l
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(LEX) -o$@ $(call absfilename,$<)
-
-%.i:	%.c
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CC) -E -H -dD $(CPPFLAGS) $(CFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -o $@ $@
-
-%.s.i:	%.c
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CC) -E -H -dD $(CPPFLAGS) $(CFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -o $@ $@
-
-%.i:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CXX) -E -H -dD $(CPPFLAGS) $(CXXFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -sob -o $@ $@
-
-%.s.i:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CXX) -E -H -dD $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -sob -o $@ $@
-
-%.i:	%.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CXX) -E -H -dD $(CPPFLAGS) $(CXXFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -sob -o $@ $@
-
-%.i:	%.S
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CC) -E -H -dD $(CPPFLAGS) $(ASFLAGS) $(call absfilename,$<) -o $@
-	$(VERBOSE)$(INDENT) -sob -o $@ $@
-
-%.S:	%.c
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CC) -S $(CFLAGS) $(CPPFLAGS) $(call absfilename,$<) -o $@
-
-%.S:	%.cc
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CXX) -S $(CXXFLAGS) $(CPPFLAGS) $(call absfilename,$<) -o $@
-
-%.S:	%.cpp
-	@$(COMP_MESSAGE)
-	$(VERBOSE)$(CXX) -S $(CXXFLAGS) $(CPPFLAGS) $(call absfilename,$<) -o $@
-
-%.dpi:	%.dpe
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,perl) $(GEN_DOPECODE) $< >$@
-
-DEPS	+= $(foreach file,$(ALLOBJS), $(dir $(file)).$(notdir $(file)).d)
-DEPS	+= $(foreach file,$(ALLDPI), $(dir $(file)).$(notdir $(file)).d)
-
-# Common clean Rules
-
-clean cleanall::
-	$(VERBOSE)$(RM) $(strip $(filter-out $(KEEP_ON_CLEAN),\
-		$(wildcard *.dpi) $(wildcard *.o) $(ALLOBJS) $(DEL_ON_CLEAN)))
-
-# clean: delete all temporary editor files, objects, binaries
-#        and most generated files
-cleanall::
-	$(VERBOSE)$(RM) $(TARGET) $(wildcard .*.d) $(wildcard $(BID_OBJ_Makefile).inc)
-
-.PHONY: scrub clean cleanall disasm
-
-endif	# $(SYSTEM) is defined
-
-# General rules
-
-# scrub: delete temporary editor files and stuff like this
-#        can be extended by lokals
-scrub cleanall::
-	$(VERBOSE)$(SCRUB)
-
diff --git a/libdde-linux26/libdde_linux26/mk/config.help b/libdde-linux26/libdde_linux26/mk/config.help
deleted file mode 100644
index 9e0a8728..00000000
--- a/libdde-linux26/libdde_linux26/mk/config.help
+++ /dev/null
@@ -1,379 +0,0 @@
-CPU architecture
-BUILD_ARCH_x86
-  Specify for which processor architecture you want to build. You may
-  select between x86 (PC), arm, and amd64.
-
-
-CPU-Types for architecture
-CPU
-  Specify for which CPU types you want to build code.
-  Specify at least one CPU type.
-
-  Supported CPUs for x86 architecture are: 586, 686, K6, K7.
-  Supported CPUs for arm architecture are: sa, int.
-
-  You can build for multiple CPU types, the code will be stored in
-  different directories.
-
-
-Build code using API
-BUILD_ABI_l4v2
-  Specify the version of the Kernel Programming Interface. You may
-  select between L4.Fiasco (previously V2) or Linux.
-
-
-Build for arm architecture
-BUILD_SYSTEMS_arm_s
-  If you want to build code for the arm architecture, say Y here.
-
-  You can build for multiple architectures, the code will be stored in
-  different directories.
-
-  Most users will say N here.
-
-CPU-Types for arm architecture
-CPU_arm
-  Specify for which arm architecture CPU types you want to build code.
-  Specify at least one CPU type. Supported CPUs are: sa.
-
-  You can build for multiple CPU types, the code will be stored in
-  different directories.
-
-Build for amd64 architecture
-BUILD_SYSTEMS_amd64_s
-  If you want to build code for the amd64 architecture, say Y here.
-
-  You can build for multiple architectures, the code will be stored in
-  different directories.
-
-  Most users will say N here.
-
-CPU-Types for amd64 architecture
-CPU_amd64
-  Specify for which amd64 architecture CPU types you want to build code.
-  Specify at least one CPU type.
-
-  You can build for multiple CPU types, the code will be stored in
-  different directories.
-  
-Build for ppc32 architecture
-BUILD_SYSTEMS_ppc32_s
-  If you want to build code for the ppc32 architecture, say Y here.
-
-  You can build for multiple architectures, the code will be stored in
-  different directories.
-
-  Most users will say N here.
-
-CPU-Types for ppc32 architecture
-CPU_ppc32
-  Specify for which ppc32 architecture CPU types you want to build code.
-  Specify at least one CPU type.
-
-  You can build for multiple CPU types, the code will be stored in
-  different directories.
-
-
-
-
-Build shared libloaders.s.so
-BUILD_LOADER
-  The "loader" package allows to build a shared library containing
-  common libraries of L4Env. To build this shared library, the other
-  L4Env libraries must be build in PIC mode, additionally to the
-  normal, i.e. non-PIC, mode.
-  
-  If you want to use the loader, say Y here.
-
-
-Base directory of the DROPS install tree
-DROPS_STDDIR
-  This is the directory where the includes, libraries and binaries
-  are looked for. On 'make install', files are installed here.
-  
-  For users at TUD with access to os:/home/drops, this is /home/drops.
-  For others, this is usually $(HOME)/src/drops or similar.
-
-
-Final location of the DROPS install tree
-DROPS_INSTDIR
-  In case you are installing into a temporary DROPS_STDDIR subdirectory,
-  which will be moved later, set DROPS_INSTDIR to this final
-  destination.
-  
-  You will normally use the default setting "$(DROPS_STDDIR)".
-  DROPS_INSTDIR is merely used by the daily consitency-check of DROPS.
-
-
-DDE-2.4 include path
-DDE_INCDIR
-  This is a space-separated list of paths where the DDE-Linux includes
-  can be found.
-  
-  Upon compilation, the DDE-Linux package installs its header files
-  like any other DROPS package into subdirs of $(L4DIR)/include or
-  $(DROPS_STDDIR)/include, respectively. This variable lists these
-  subdirectories.
-  
-  Normally, you do not have to change this value.
-
-DDE-2.6 include path
-DDE26_INCDIR
-  This is a space-separated list of paths where the includes of the
-  Linux-2.6 version of the DDE-Linux package (dde_linux26) can be
-  found.
-  
-  Upon compilation, the DDE-Linux 2.6 package installs its header
-  files like any other DROPS package into subdirs of $(L4DIR)/include
-  or $(DROPS_STDDIR)/include, respectively. This variable lists these
-  subdirectories.
-  
-  Normally, you do not have to change this value.
-
-
-SDL include path
-SDL_INCDIR
-  This is a space-separated list of paths where the SDL includes can
-  be found.
-  
-  Upon compilation, the SDL package installs its header files
-  like any other DROPS package into subdirs of $(L4DIR)/include or
-  $(DROPS_STDDIR)/include, respectively. This variable lists these
-  subdirectories.
-  
-  Normally, you do not have to change this value.
-
-
-Verbose dependency building
-DEPEND_VERBOSE_SWITCH
-  If enabled, the commands for dependency-generation will be shown. If
-  disabled, DEPEND_VERBOSE is set to '@' to prevent this.
-
-  Most users will say N here.
-
-
-Verbose compilation and building
-VERBOSE_SWITCH
-  If enabled, the commands issued for compilation will be shown. If
-  disabled, VERBOSE is set to '@' to prevent this.
-
-
-Short messages for compilation
-SHOWMESSAGES
-  If enabled, a short textual description for every compilation step
-  is printed.
-
-  Most users will say Y here.
-
-
-Colored build-steps
-BID_COLORED_PHASES
-  If enabled, significant messages will be printed in color, depending
-  on your $TERM setting.
-
-
-Use special C-Compilers
-BIDc_USE_SPECIAL_CC
-  If you want to specify specific versions of C and C++ compilers instead
-  of using the default ones, enable this option. Defaults are
-  "$(SYSTEM_TARGET)gcc" and "$(SYSTEM_TARGET)g++".
-
-  Most users will say N here.
-
-Specific C-Compiler
-HOSTCC
-  The C compiler to use to generate code for the host system (the one
-  you are using currently).
-
-Specific C++-Compiler
-HOSTCXX
-  The C++ compiler to use to generate code for the host system (the one
-  you are using currently).
-
-Specific C-Compiler
-CC_x86
-  The C compiler to build x86 code.
-
-Specific C++-Compiler
-CXX_x86
-  The C++ compiler to build x86 code.
-
-Specific C-Compiler
-CC_arm
-  The C compiler to build arm code.
-
-Specific C++-Compiler
-CXX_arm
-  The C++ compiler to build arm code.
-
-
-YACC-name
-YACC
-  If you would like to use alternative yacc or lex tools, set those names
-  here. Defaults are 'byacc' and 'flex'. You can also specify cmdline
-  arguments using this option.
-
-LEX-name
-LEX
-  If you would like to use alternative yacc or lex tools, set those names
-  here. Defaults are 'byacc' and 'flex'. You can also specify cmdline
-  arguments using this option.
-
-CTAGS-name
-CTAGS
-  If you would like to use alternative ctags tool, set its name here.
-  You may want to at least also specify a recursive option for your ctags
-  tool.
-
-ETAGS-name
-ETAGS
-  If you would like to use alternative etags tool, set its name here.
-  You may want to at least also specify a recursive option for your etags
-  tool.
-
-System has ld.so
-HAVE_LDSO
-  If your system provides the dynamic linker ld.so, and this is used
-  by your compilers, you should enable this switch. This allows to
-  use faster, more flexible and more accurate methods for dependency
-  building.
-  
-  Most Linux-users will say Y here.
-
-
-Automatically determine C preprocessor names
-INT_CPP_NAME_SWITCH
-  If you use C-compilers BID does not know so far, there is a chance you
-  have to help BID about the names of the C and C++ preprocessors. E.g.,
-  gcc tends to change its preprocessor names from subversion to
-  subversion, and the dependency tool used by BID wants to know about
-  these names.  However, if dependencies are generated well, BID already
-  selected the corrects names for you.
-  
-  Most users will say Y here.
-
-
-Internal C preprocessor name
-INT_CPP_x86_NAME
-  The command name of the preprocessor your x86 C compiler uses.
-  Note: It is not necessarily the preprocessor as you would invoke it
-  from the command line. gcc uses its own internal names.
-
-  For gcc versions prior to gcc 2.95.4 it is 'cpp'.
-  gcc verssion 2.95.4 uses 'cpp0'. gcc version 3.2 uses 'cc1'.
-
-
-Internal C++ preprocessor name
-INT_CXX_x86_NAME
-  The command name of the preprocessor your x86 C++ compiler uses.
-  Note: It is not necessarily the preprocessor as you would invoke it
-  from the command line. g++ uses its own internal names.
-
-  For g++ versions prior to gcc 2.95.4 it is 'cpp'.
-  gcc verssion 2.95.4 uses 'cpp0'. gcc version 3.2 uses 'cc1plus'.
-
-
-Internal C preprocessor name
-INT_CPP_arm_NAME
-  The command name of the preprocessor your arm C compiler uses.
-  Note: It is not necessarily the preprocessor as you would invoke it
-  from the command line. gcc uses its own internal names.
-
-  For gcc versions prior to gcc 2.95.4 it is 'cpp'.
-  gcc verssion 2.95.4 uses 'cpp0'. gcc version 3.2 uses 'cc1'.
-
-
-Internal C++ preprocessor name
-INT_CXX_arm_NAME
-  The command name of the preprocessor your arm C++ compiler uses.
-  Note: It is not necessarily the preprocessor as you would invoke it
-  from the command line. g++ uses its own internal names.
-
-  For g++ versions prior to gcc 2.95.4 it is 'cpp'.
-  gcc verssion 2.95.4 uses 'cpp0'. gcc version 3.2 uses 'cc1plus'.
-
-
-Automatically determine LD names
-INT_LD_NAME_SWITCH
-  If you use C/C++ compilers BID does not know so far, there is a
-  chance you have to help BID about the names of the linker binaries.
-  E.g., linker binaries change on cross-compiler environments. The
-  dependency tool used by BID wants to know about these names. 
-  However, if dependencies are generated well, BID already selected the
-  corrects names for you.
-  
-  Most users will say Y here.
-
-Internal linker name
-INT_LD_x86_NAME
-  The command name of the linker your x86 C/C++ compiler uses.
-
-Internal linker name
-INT_LD_arm_NAME
-  The command name of the linker your arm C/C++ compiler uses.
-
-Strip binaries on install
-BID_STRIP_PROGS
-  If enabled, binaries will be stripped on installation into
-  $(L4DIR)/bin or $(DROPS_STDDIR)/bin. If you want to load them with
-  all their symbols (eg to show the symbols with the Fiasco kernel
-  debugger), say 'N' here.
-  
-  If unsure, say 'Y'.
-
-Generate gstabs-compatible debug Infos with gcc-3+
-BID_GSTAB_SW
-  If enabled, gcc will be passed the '-gstabs+' cmdline option. gcc will
-  generate debug information in the stabs format, including GNU
-  specific extensions.
-  
-  Enable this option to show the line information in the fiasco kernel
-  debugger. Disable BID_STRIP_PROGS then.
-  
-  You can safely say 'Y' here.
-
-GCC: Omit Frame-pointers
-BID_GCC_OMIT_FP
-
-  If enabled, gcc will be passed the '-fomit-frame-pointer' cmdline
-  option, adding an additional register to the register set for the
-  generated code. Programs will be faster, but backtraces cannot be
-  done, seriously hindering debugging.
-  
-  If unsure, say 'N'.
-
-Generate Map-files for binaries
-BID_GENERATE_MAPFILE
-
-  Enabling this option will generate map-files together with the binaries.
-  You do not need mapfiles for DROPS to work properly, but you might
-  become handy for debugging purposes. See ld(1) for details on mapfiles.
-  
-  If unsure, say 'N'.
-
-Build system using dietlibc
-USE_DIETLIBC
-  Uses the dietlibc as the main libc (deprecated).
-
-Build system using uClibc
-USE_UCLIBC
-  Uses the uClibc as the main libc.
-
-Enable Release flag
-RELEASE_FLAG
-  This option enables the RELEASE flag possible omitting
-  debugging/development code.
-
-Build documentation
-BID_BUILD_DOC
-  Build documentation.
-
-Build only in l4 directory
-BID_BUILD_L4DIR_ONLY
-  Only build in l4 directory, no kernel, no dice.
-
-Name for the configuration
-CONFIG_LABEL
-  Name for the configuration. The build system will also try to include
-  a file Makeconf.<label> from the build directory root and the l4 directory
-  root.
diff --git a/libdde-linux26/libdde_linux26/mk/config.in b/libdde-linux26/libdde_linux26/mk/config.in
deleted file mode 100644
index ebf52232..00000000
--- a/libdde-linux26/libdde_linux26/mk/config.in
+++ /dev/null
@@ -1,214 +0,0 @@
-# -*- Shell-script -*-
-# vim:se ft=sh:
-
-mainmenu_name "DROPS Configuration"
-
-mainmenu_option next_comment
-comment 'Target Architecture'
-
-choice 'Target Architecture' \
-	"x86              BUILD_ARCH_x86 \
-	 arm              BUILD_ARCH_arm \
-	 amd64            BUILD_ARCH_amd64" x86
-
-if [ "$BUILD_ARCH_x86" = "y" ] ; then
-  define_string BUILD_ARCH "x86"
-  string " CPU type" CPU '586'
-fi
-
-if [ "$BUILD_ARCH_arm" = "y" ] ; then
-  define_string BUILD_ARCH "arm"
-fi
-
-if [ "$BUILD_ARCH_amd64" = "y" ] ; then
-  define_string BUILD_ARCH "amd64"
-  string " CPU type" CPU 'k8'
-fi
-
-
-choice ' ABI' \
-  "L4.Fiasco BUILD_ABI_l4v2 \
-   Linux     BUILD_ABI_linux" L4.Fiasco
-
-if [ "$BUILD_ABI_l4v2" = "y" ] ; then
-  define_string BUILD_ABI "l4v2"
-fi
-if [ "$BUILD_ABI_linux" = "y" ] ; then
-  define_string BUILD_ABI "linux"
-fi
-
-if [ "$BUILD_ARCH_arm" = "y" ] ; then
-
-  choice 'ARM Platform' \
-     "integrator   PLATFORM_ARM_integrator \
-      rv           PLATFORM_ARM_rv \
-      custom       PLATFORM_ARM_custom" integrator
-
-  if [ "$PLATFORM_ARM_integrator" = "y" ] ; then
-    define_string CPU 'int'
-    define_string ARM_PLATFORM_TYPE 'integrator'
-    string "RAM base" RAM_BASE 0x0
-    int  "RAM size in MB" RAM_SIZE_MB 256
-  fi
-  if [ "$PLATFORM_ARM_rv" = "y" ] ; then
-    define_string CPU 'rv'
-    define_string ARM_PLATFORM_TYPE 'rv'
-    string "RAM base" RAM_BASE 0x0
-    int "RAM size in MB" RAM_SIZE_MB 256
-  fi
-
-  if [ "$PLATFORM_ARM_custom" = "y" ] ; then
-    string " CPU type" CPU 'int'
-    string " Platform name" ARM_PLATFORM_TYPE 'integrator'
-    string "RAM base" RAM_BASE 0x0
-    int "RAM size in MB" RAM_SIZE_MB 256
-  fi
-
-
-fi
-
-endmenu
-
-
-mainmenu_option next_comment
-comment 'Paths and Directories'
-string 'DROPS_STDDIR' DROPS_STDDIR '/path/to/drops'
-string 'DROPS_INSTDIR' DROPS_INSTDIR '$(DROPS_STDDIR)'
-endmenu
-
-mainmenu_option next_comment
-comment 'Verboseness and Messages'
-bool 'Verbose dependency building' DEPEND_VERBOSE_SWITCH
-if [ "$DEPEND_VERBOSE_SWITCH" = "n" ] ; then
-    define_string DEPEND_VERBOSE @
-fi
-bool 'Verbose compilation and building' VERBOSE_SWITCH
-if [ "$VERBOSE_SWITCH" = "n" ] ; then
-    define_string VERBOSE @
-fi
-bool 'Short messages for compilation' SHOWMESSAGES
-if [ "$SHOWMESSAGES" = "y" ] ; then
-    bool 'Colored build-steps' BID_COLORED_PHASES
-fi
-endmenu
-
-mainmenu_option next_comment
-comment 'Compilers and Tools'
-bool 'Use special C-Compilers' BIDc_USE_SPECIAL_CC
-if [ "$BIDc_USE_SPECIAL_CC" = "y" ] ; then
-    string 'HOST_CC'  HOST_CC  'gcc'
-    string 'HOST_CXX' HOST_CXX 'g++'
-    if [ "$BUILD_ARCH" = "x86" ] ; then
-        string 'CC'  CC  '$(SYSTEM_TARGET_x86)gcc -m32'
-        string 'CXX' CXX '$(SYSTEM_TARGET_x86)g++ -m32'
-    fi
-    if [ "$BUILD_ARCH" = "arm" ] ; then
-        string 'CC'  CC  '$(SYSTEM_TARGET_arm)gcc'
-        string 'CXX' CXX '$(SYSTEM_TARGET_arm)g++'
-    fi
-    if [ "$BUILD_ARCH" = "amd64" ] ; then
-        string 'CC'  CC  '$(SYSTEM_TARGET_amd64)gcc -m64'
-        string 'CXX' CXX '$(SYSTEM_TARGET_amd64)g++ -m64'
-    fi
-else
-    define_string HOST_CC   'gcc'
-    define_string HOST_CXX  'g++'
-    if [ "$BUILD_ARCH" = "x86" ] ; then
-      define_string CC  '$(SYSTEM_TARGET_x86)gcc -m32'
-      define_string CXX '$(SYSTEM_TARGET_x86)g++ -m32'
-    fi
-    if [ "$BUILD_ARCH" = "arm" ] ; then
-      define_string CC  '$(SYSTEM_TARGET_arm)gcc'
-      define_string CXX '$(SYSTEM_TARGET_arm)g++'
-    fi
-    if [ "$BUILD_ARCH" = "amd64" ] ; then
-      define_string CC  '$(SYSTEM_TARGET_amd64)gcc -m64'
-      define_string CXX '$(SYSTEM_TARGET_amd64)g++ -m64'
-    fi
-fi
-comment "Tools"
-string 'YACC' YACC byacc
-string 'LEX' LEX flex
-string 'CTAGS' CTAGS ctags
-string 'ETAGS' ETAGS etags
-
-comment "Options"
-bool 'System has ld.so (highly recommended if so)' HAVE_LDSO
-if [ "$HAVE_LDSO" = "y" ] ; then
-    bool 'Automatically determine internal gcc preprocessor names' INT_CPP_NAME_SWITCH
-    if [ "$INT_CPP_NAME_SWITCH" = "n" ] ; then
-        if [ "$BUILD_ARCH" = "x86" ] ; then
-          string 'Internal name of x86 gcc preprocessor' INT_CPP_NAME "cpp0"
-          string 'Internal name of x86 g++ preprocessor' INT_CXX_NAME "cpp0"
-	fi
-        if [ "$BUILD_ARCH" = "arm" ] ; then
-          string 'Internal name of arm gcc preprocessor' INT_CPP_NAME "cpp0"
-          string 'Internal name of arm g++ preprocessor' INT_CXX_NAME "cpp0"
-	fi
-        if [ "$BUILD_ARCH" = "amd64" ] ; then
-          string 'Internal name of amd64 gcc preprocessor' INT_CPP_NAME "cpp0"
-          string 'Internal name of amd64 g++ preprocessor' INT_CXX_NAME "cpp0"
-	fi
-    fi
-    bool 'Automatically determine internal ld names' INT_LD_NAME_SWITCH
-    if [ "$INT_LD_NAME_SWITCH" = "n" ] ; then
-        if [ "$BUILD_ARCH" = "x86" ] ; then
-          string 'Internal name of x86 gcc/g++ linker' INT_LD_NAME "ld"
-	fi
-        if [ "$BUILD_ARCH" = "arm" ] ; then
-          string 'Internal name of arm gcc/g++ linker' INT_LD_NAME "ld"
-	fi
-        if [ "$BUILD_ARCH" = "amd64" ] ; then
-          string 'Internal name of amd64 gcc/g++ linker' INT_LD_amd64_NAME "ld"
-	fi
-    fi
-fi
-bool 'Strip binaries on install' BID_STRIP_PROGS
-bool 'Generate stabs-compatible debug Infos with gcc-3+' BID_GSTAB_SW
-if [ "$BID_GSTAB_SW" = "y" ] ; then
-    define_string BID_CFLAGS_GSTAB "-gstabs+"
-fi
-bool 'GCC: Omit Frame-pointers' BID_GCC_OMIT_FP
-if [ "$BID_GCC_OMIT_FP" = "y" ] ; then
-    define_string BID_CFLAGS_OMIT_FP "-fomit-frame-pointer"
-fi
-bool 'Generate Map-files for binaries' BID_GENERATE_MAPFILE
-bool 'Build doc directories' BID_BUILD_DOC
-
-endmenu
-
-mainmenu_option next_comment
-  comment 'Advanced'
-
-  define_bool USE_UCLIBC   "y"
-  define_bool USE_DIETLIBC "n"
-
-  define_bool   BUILD_LOADER "y"
-  define_string BUILD_LOADER_PICS 'libl4util.a libl4util_root.a libsigma0.a libnames.a libloaderif.a libcon.a libl4rm.a libbootmod.a libcon.a libconstream-server.a libdm_generic.a libdm_mem.a libgeneric_ts.a liblogserver.a liblogserver_capsule.a libsemaphore.a libthread.a libslab.a libgeneric_fprov.a libl4env_err.a libl4env.a libroot.a libc_be_l4env_start_stop.a libc_be_minimal_log_io.a libc_be_simple_mem.a libc_be_mmap.a libc_be_mmap_util.a libuclibc_support.a libuclibm_support.a librtc.a libl4env-l4lx.a'
-
-  bool 'Use system-call entry code in the KIP (absolute)' L4_CALL_SYSCALLS
-  if [ "$L4_CALL_SYSCALLS" = "y" ] ; then
-    define_bool L4_ABS_SYSCALLS "y"
-    define_string  BID_CPPFLAGS_SYSCALLS "-DCONFIG_L4_CALL_SYSCALLS -DCONFIG_L4_ABS_SYSCALLS"
-  fi
-
-  bool 'Use hierarchical task system (EXPERIMENTAL)' USE_TASKLIB
-  bool 'Enable RELEASE flag' RELEASE_MODE
-  bool 'Do not build anything outside l4 directory' BID_BUILD_L4DIR_ONLY
-
-  string 'Configuration label' CONFIG_LABEL
-
-  mainmenu_option next_comment
-    comment 'Paths'
-
-    define_string LINUX24_INCDIR '$(OBJ_BASE)/include/linux-24 $(DROPS_STDDIR)/include/linux-24'
-    define_string LINUX26_INCDIR '$(OBJ_BASE)/include/$(ARCH)/l4/linux-26-headers $(DROPS_STDDIR)/include/$(ARCH)/l4/linux-26-headers $(OBJ_BASE)/include/l4/linux-26-headers $(DROPS_STDDIR)/include/l4/linux-26-headers'
-
-    string 'DDE-2.4 include path (DDE_INCDIR)' DDE_INCDIR '$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux'
-    string 'DDE-2.6 include path (DDE26_INCDIR)' DDE26_INCDIR '$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux26 $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux26 $(OBJ_BASE)/include/l4/dde_linux26 $(DROPS_STDDIR)/include/l4/dde_linux26'
-    string 'SDL include path (SDL_INCDIR)' SDL_INCDIR '$(OBJ_BASE)/include/l4/sdl $(DROPS_STDDIR)/include/l4/sdl'
-    if [ "$BUILD_SYSTEMS_x86_l4secv2emu" = "y" ] ; then
-      string 'Fiasco build directory (FIASCO_DIR)' FIASCO_DIR '$(L4DIR)/kernel/fiasco/build_test/'
-    fi
-  endmenu
-endmenu
diff --git a/libdde-linux26/libdde_linux26/mk/config.inc b/libdde-linux26/libdde_linux26/mk/config.inc
deleted file mode 100644
index 841ef9b7..00000000
--- a/libdde-linux26/libdde_linux26/mk/config.inc
+++ /dev/null
@@ -1,137 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Include for compiling templates (prog.mk, lib.mk)
-#
-
-# Makefile-Include for binary, lib, subdir and other directories.
-# Definitions and rules for the DROPS configuration tool.
-
-# Supported targets:
-#
-# config::      - run the menu-driven configuration tool
-# txtconfig::	- run the configuration tool
-# oldconfig::	- (re)create the configuration header based on a prior
-#		  configuration or default values
-#
-#
-# Required Parameters:
-#
-# PKGDIR
-#
-#
-# Optional Parameters:
-#
-# DROPSCONF		- if nonempty, the configuration tool is run for
-#			  target config::. If empty, the configuration tool
-#			  is not run.
-# DROPSCONF_TITLE	- the main title in the configuration tool.
-# DROPSCONF_DEFCONFIG	- default config file
-# DROPSCONF_CONFIG_IN	- configuration defintion file
-# DROPSCONF_CONFIG	- config file
-# DROPSCONF_CONFIG_H	- generated config header file
-# DROPSCONF_MACRO	- macro to indicate inclusion of config header file
-# DROPSCONF_HELPFILE	- options help file
-# DROPSCONF_TOOL	- the menudriven configuration tool
-# DROPSCONF_TOOL_TXT	- the configuration tool
-# DROPSCONF_TOOL_OLD	- helper for recreating the config header file
-
-DROPSCONF		?=
-DROPSCONF_TITLE		?= DROPS Configuration Tool
-DROPSCONF_DEFCONFIG	?= defconfig
-DROPSCONF_CONFIG_IN	?= config.in
-DROPSCONF_CONFIG	?= $(OBJ_DIR)/.config
-DROPSCONF_CONFIG_H	?= $(OBJ_DIR)/config.h
-DROPSCONF_CONFIG_MK	?= $(OBJ_DIR)/Makeconf.bid.local
-DROPSCONF_DONTINC_MK	?=
-DROPSCONF_MACRO		?= CONFIG_H_INCLUDED
-DROPSCONF_HELPFILE	?= config.help
-DROPSCONF_LXDIALOG	?= $(OBJ_BASE)/tool/config/lxdialog/lxdialog
-DROPSCONF_TOOL		?= $(firstword $(wildcard \
-					$(L4DIR)/tool/config/Menuconfig \
-					$(DROPS_STDDIR)/tool/bin/Menuconfig) \
-					did_not_find_BID_Menuconfig)
-DROPSCONF_TOOL_TXT	?= $(firstword $(wildcard \
-					$(L4DIR)/tool/config/Configure \
-					$(DROPS_STDDIR)/tool/bin/Configure) \
-					did_not_find_BID_Configure)
-DROPSCONF_TOOL_OLD	?= $(firstword $(wildcard \
-					$(L4DIR)/tool/config/Configure \
-					$(DROPS_STDDIR)/tool/bin/Configure) \
-					did_not_find_BID_Configure) -d
-DROPSCONF_VARDEFS = $(foreach v,TITLE DEFCONFIG CONFIG_IN CONFIG CONFIG_H \
-	MACRO HELPFILE UNDEF LXDIALOG,DROPSCONF_$v='$(DROPSCONF_$v)')
-
-ifneq ($(DROPSCONF),)
-.o:	$(DROPSCONF_CONFIG_H)
-
-$(DROPSCONF_CONFIG_H): $(DROPSCONF_CONFIG)
-
-$(DROPSCONF_CONFIG_H) $(DROPSCONF_CONFIG): $(DROPSCONF_CONFIG_IN)
-	@$(GEN_MESSAGE)
-	$(VERBOSE)install -d $(dir $(DROPSCONF_CONFIG))
-	$(VERBOSE)install -d $(dir $(DROPSCONF_CONFIG_H))
-	$(VERBOSE)if tty >/dev/null; then \
-	  $(DROPSCONF_VARDEFS) $(DROPSCONF_TOOL_OLD); \
-	 else \
-	  true | $(DROPSCONF_VARDEFS) $(DROPSCONF_TOOL_OLD) \
-	  $(if $(VERBOSE),>/dev/null,) || \
-	  ( echo -e "\nError: Unattended mode -- Some defaults for config options are missing." ; \
-	    false ) \
-	 fi
-
-$(DROPSCONF_CONFIG_MK): $(DROPSCONF_CONFIG)
-	$(VERBOSE)sed -e "s/\(^[^= ]*=\)'\([^']*\)'/\1\2/" \
-		<$(DROPSCONF_CONFIG) >$@
-	$(VERBOSE)$(MAKE) DROPSCONF_CONFIG_MK_POST_HOOK
-
-DROPSCONF_CONFIG_MK_POST_HOOK::
-	
-config:: $(DROPSCONF_LXDIALOG)
-	$(VERBOSE)install -d $(dir $(DROPSCONF_CONFIG_H))
-	$(VERBOSE)$(DROPSCONF_VARDEFS) $(DROPSCONF_TOOL)
-	$(VERBOSE)test ! -r $(DROPSCONF_CONFIG) -o \
-		! $(DROPSCONF_CONFIG) -nt $(DROPSCONF_CONFIG_MK) || \
-		$(MAKE) $(DROPSCONF_CONFIG_MK)
-
-txtconfig::
-	$(VERBOSE)install -d $(dir $(DROPSCONF_CONFIG_H))
-	$(VERBOSE)$(DROPSCONF_VARDEFS) $(DROPSCONF_TOOL_TXT)
-	@$(MAKE) $(DROPSCONF_CONFIG_MK)
-
-oldconfig::
-	$(VERBOSE)install -d $(dir $(DROPSCONF_CONFIG_H))
-	$(VERBOSE)$(DROPSCONF_VARDEFS) $(DROPSCONF_TOOL_OLD)
-	@$(MAKE) $(DROPSCONF_CONFIG_MK)
-
-$(DROPSCONF_LXDIALOG):
-	$(VERBOSE)install -d $(@D)
-	$(VERBOSE)PWD=$(call absfilename,$(L4DIR)/tool/config) $(MAKE) -C $(L4DIR)/tool/config
-
-clean::
-
-cleanall::
-	$(VERBOSE)$(RM) $(DROPSCONF_CONFIG) $(DROPSCONF_CONFIG_H) \
-			$(DROPSCONF_CONFIG_MK) .menuconfig.log \
-			$(DROPSCONF_CONFIG).old
-help::
-	@echo "  config         - run the menu-driven configuration tool"
-	@echo "  txtconfig      - run the configuration tool"
-	@echo "  oldconfig      - (re)create the configuration header based on a prior"
-	@echo "                   configuration or default values"
-
-# special switch not to include DROPSCONF_CONFIG_MK
-ifeq ($(DROPSCONF_DONTINC_MK),)
-# do not prebuild the config file on "make config"
-ifeq ($(filter config oldconfig txtconfig help scrub clean cleanall $(DROPSCONF_CONFIG_MK),$(MAKECMDGOALS)),)
--include $(DROPSCONF_CONFIG_MK)
-endif
-endif
-
-# end of DROPSCONF defined
-else
-config txtconfig oldconfig::
-endif
-
-.PHONY: config oldconfig txtconfig
diff --git a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.amd64 b/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.amd64
deleted file mode 100644
index 7213f8d2..00000000
--- a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.amd64
+++ /dev/null
@@ -1,82 +0,0 @@
-#
-# Automatically generated by configuration tool: don't edit
-#
-
-#
-# Target Architecture
-#
-BUILD_ARCH_x86=n
-BUILD_ARCH_arm=n
-BUILD_ARCH_amd64=y
-BUILD_ARCH='amd64'
-CPU='k8'
-BUILD_ABI_l4v2=y
-BUILD_ABI_linux=n
-BUILD_ABI='l4v2'
-
-#
-# Paths and Directories
-#
-DROPS_INSTDIR='$(DROPS_STDDIR)'
-
-#
-# Verboseness and Messages
-#
-DEPEND_VERBOSE_SWITCH=n
-DEPEND_VERBOSE='@'
-VERBOSE_SWITCH=y
-SHOWMESSAGES=y
-BID_COLORED_PHASES=y
-
-#
-# Compilers and Tools
-#
-BIDc_USE_SPECIAL_CC=n
-HOST_CC='gcc'
-HOST_CXX='g++'
-CC='$(SYSTEM_TARGET_amd64)gcc -m64'
-CXX='$(SYSTEM_TARGET_amd64)g++ -m64'
-
-#
-# Tools
-#
-YACC='byacc'
-LEX='flex'
-CTAGS='ctags'
-ETAGS='etags'
-
-#
-# Options
-#
-HAVE_LDSO=y
-INT_CPP_NAME_SWITCH=y
-INT_LD_NAME_SWITCH=y
-BID_STRIP_PROGS=n
-BID_GSTAB_SW=n
-BID_GCC_OMIT_FP=n
-BID_GENERATE_MAPFILE=n
-BID_BUILD_DOC=n
-
-#
-# Advanced
-#
-USE_UCLIBC=y
-USE_DIETLIBC=n
-BUILD_LOADER=y
-BUILD_LOADER_PICS='libl4util.a libl4util_root.a libsigma0.a libnames.a libloaderif.a libcon.a libl4rm.a libbootmod.a libcon.a libconstream-server.a libdm_generic.a libdm_mem.a libgeneric_ts.a liblogserver.a liblogserver_capsule.a libsemaphore.a libthread.a libslab.a libgeneric_fprov.a libl4env_err.a libl4env.a libroot.a libc_be_l4env_start_stop.a libc_be_minimal_log_io.a libc_be_simple_mem.a libc_be_mmap.a libc_be_mmap_util.a libuclibc_support.a librtc.a libl4env-l4lx.a'
-L4_CALL_SYSCALLS=y
-L4_ABS_SYSCALLS=y
-BID_CPPFLAGS_SYSCALLS='-DCONFIG_L4_CALL_SYSCALLS -DCONFIG_L4_ABS_SYSCALLS'
-USE_TASKLIB=n
-RELEASE_MODE=n
-BID_BUILD_L4DIR_ONLY=n
-CONFIG_LABEL='__none__'
-
-#
-# Paths
-#
-LINUX24_INCDIR='$(OBJ_BASE)/include/linux-24 $(DROPS_STDDIR)/include/linux-24'
-LINUX26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/linux-26-headers $(DROPS_STDDIR)/include/$(ARCH)/l4/linux-26-headers $(OBJ_BASE)/include/l4/linux-26-headers $(DROPS_STDDIR)/include/l4/linux-26-headers'
-DDE_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux'
-DDE26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux26 $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux26 $(OBJ_BASE)/include/l4/dde_linux26 $(DROPS_STDDIR)/include/l4/dde_linux26'
-SDL_INCDIR='$(OBJ_BASE)/include/l4/sdl $(DROPS_STDDIR)/include/l4/sdl'
diff --git a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.arm-int-l4v2 b/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.arm-int-l4v2
deleted file mode 100644
index c6aba286..00000000
--- a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.arm-int-l4v2
+++ /dev/null
@@ -1,89 +0,0 @@
-#
-# Automatically generated by configuration tool: don't edit
-#
-
-#
-# Target Architecture
-#
-BUILD_ARCH_x86=n
-BUILD_ARCH_arm=y
-BUILD_ARCH_amd64=n
-BUILD_ARCH='arm'
-BUILD_ABI_l4v2=y
-BUILD_ABI_linux=n
-BUILD_ABI='l4v2'
-PLATFORM_ARM_integrator=y
-PLATFORM_ARM_rv=n
-PLATFORM_ARM_custom=n
-CPU='int'
-ARM_PLATFORM_TYPE='integrator'
-RAM_BASE='0x0'
-RAM_SIZE_MB=256
-
-#
-# Paths and Directories
-#
-DROPS_INSTDIR='$(DROPS_STDDIR)'
-
-#
-# Verboseness and Messages
-#
-DEPEND_VERBOSE_SWITCH=n
-DEPEND_VERBOSE='@'
-VERBOSE_SWITCH=y
-SHOWMESSAGES=y
-BID_COLORED_PHASES=y
-
-#
-# Compilers and Tools
-#
-BIDc_USE_SPECIAL_CC=n
-HOST_CC='gcc'
-HOST_CXX='g++'
-CC='$(SYSTEM_TARGET_arm)gcc'
-CXX='$(SYSTEM_TARGET_arm)g++'
-
-#
-# Tools
-#
-YACC='byacc'
-LEX='flex'
-CTAGS='ctags'
-ETAGS='etags'
-
-#
-# Options
-#
-HAVE_LDSO=y
-INT_CPP_NAME_SWITCH=y
-INT_LD_NAME_SWITCH=y
-BID_STRIP_PROGS=n
-BID_GSTAB_SW=y
-BID_CFLAGS_GSTAB='-gstabs+'
-BID_GCC_OMIT_FP=n
-BID_GENERATE_MAPFILE=n
-BID_BUILD_DOC=n
-
-#
-# Advanced
-#
-USE_UCLIBC=y
-USE_DIETLIBC=n
-BUILD_LOADER=y
-BUILD_LOADER_PICS='libl4util.a libl4util_root.a libsigma0.a libnames.a libloaderif.a libcon.a libl4rm.a libbootmod.a libcon.a libconstream-server.a libdm_generic.a libdm_mem.a libgeneric_ts.a liblogserver.a liblogserver_capsule.a libsemaphore.a libthread.a libslab.a libgeneric_fprov.a libl4env_err.a libl4env.a libroot.a libc_be_l4env_start_stop.a libc_be_minimal_log_io.a libc_be_simple_mem.a libc_be_mmap.a libc_be_mmap_util.a libuclibc_support.a librtc.a libl4env-l4lx.a'
-L4_CALL_SYSCALLS=y
-L4_ABS_SYSCALLS=y
-BID_CPPFLAGS_SYSCALLS='-DCONFIG_L4_CALL_SYSCALLS -DCONFIG_L4_ABS_SYSCALLS'
-USE_TASKLIB=n
-RELEASE_MODE=n
-BID_BUILD_L4DIR_ONLY=n
-CONFIG_LABEL='__none__'
-
-#
-# Paths
-#
-LINUX24_INCDIR='$(OBJ_BASE)/include/linux-24 $(DROPS_STDDIR)/include/linux-24'
-LINUX26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/linux-26-headers $(DROPS_STDDIR)/include/$(ARCH)/l4/linux-26-headers $(OBJ_BASE)/include/l4/linux-26-headers $(DROPS_STDDIR)/include/l4/linux-26-headers'
-DDE_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux'
-DDE26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux26 $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux26 $(OBJ_BASE)/include/l4/dde_linux26 $(DROPS_STDDIR)/include/l4/dde_linux26'
-SDL_INCDIR='$(OBJ_BASE)/include/l4/sdl $(DROPS_STDDIR)/include/l4/sdl'
diff --git a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.x86-586-l4v2 b/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.x86-586-l4v2
deleted file mode 100644
index a9196fc3..00000000
--- a/libdde-linux26/libdde_linux26/mk/defconfig/config.l4check.x86-586-l4v2
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Automatically generated by configuration tool: don't edit
-#
-
-#
-# Target Architecture
-#
-BUILD_ARCH_x86=y
-BUILD_ARCH_arm=n
-BUILD_ARCH_amd64=n
-BUILD_ARCH='x86'
-CPU='586'
-BUILD_ABI_l4v2=y
-BUILD_ABI_linux=n
-BUILD_ABI='l4v2'
-
-#
-# Paths and Directories
-#
-DROPS_INSTDIR='$(DROPS_STDDIR)'
-
-#
-# Verboseness and Messages
-#
-DEPEND_VERBOSE_SWITCH=n
-DEPEND_VERBOSE='@'
-VERBOSE_SWITCH=y
-SHOWMESSAGES=y
-BID_COLORED_PHASES=y
-
-#
-# Compilers and Tools
-#
-BIDc_USE_SPECIAL_CC=n
-HOST_CC='gcc'
-HOST_CXX='g++'
-CC='$(SYSTEM_TARGET_x86)gcc -m32'
-CXX='$(SYSTEM_TARGET_x86)g++ -m32'
-
-#
-# Tools
-#
-YACC='byacc'
-LEX='flex'
-CTAGS='ctags'
-ETAGS='etags'
-
-#
-# Options
-#
-HAVE_LDSO=y
-INT_CPP_NAME_SWITCH=y
-INT_LD_NAME_SWITCH=y
-BID_STRIP_PROGS=n
-BID_GSTAB_SW=y
-BID_CFLAGS_GSTAB='-gstabs+'
-BID_GCC_OMIT_FP=n
-BID_GENERATE_MAPFILE=n
-BID_BUILD_DOC=y
-
-#
-# Advanced
-#
-USE_UCLIBC=y
-USE_DIETLIBC=n
-BUILD_LOADER=y
-BUILD_LOADER_PICS='libl4util.a libl4util_root.a libsigma0.a libnames.a libloaderif.a libcon.a libl4rm.a libbootmod.a libcon.a libconstream-server.a libdm_generic.a libdm_mem.a libgeneric_ts.a liblogserver.a liblogserver_capsule.a libsemaphore.a libthread.a libslab.a libgeneric_fprov.a libl4env_err.a libl4env.a libroot.a libc_be_l4env_start_stop.a libc_be_minimal_log_io.a libc_be_simple_mem.a libc_be_mmap.a libc_be_mmap_util.a libuclibc_support.a librtc.a libl4env-l4lx.a'
-L4_CALL_SYSCALLS=y
-L4_ABS_SYSCALLS=y
-BID_CPPFLAGS_SYSCALLS='-DCONFIG_L4_CALL_SYSCALLS -DCONFIG_L4_ABS_SYSCALLS'
-USE_TASKLIB=n
-RELEASE_MODE=n
-BID_BUILD_L4DIR_ONLY=n
-CONFIG_LABEL='__none__'
-
-#
-# Paths
-#
-LINUX24_INCDIR='$(OBJ_BASE)/include/linux-24 $(DROPS_STDDIR)/include/linux-24'
-LINUX26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/linux-26-headers $(DROPS_STDDIR)/include/$(ARCH)/l4/linux-26-headers $(OBJ_BASE)/include/l4/linux-26-headers $(DROPS_STDDIR)/include/l4/linux-26-headers'
-DDE_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux'
-DDE26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux26 $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux26 $(OBJ_BASE)/include/l4/dde_linux26 $(DROPS_STDDIR)/include/l4/dde_linux26'
-SDL_INCDIR='$(OBJ_BASE)/include/l4/sdl $(DROPS_STDDIR)/include/l4/sdl'
diff --git a/libdde-linux26/libdde_linux26/mk/defconfig/config.x86 b/libdde-linux26/libdde_linux26/mk/defconfig/config.x86
deleted file mode 100644
index a9196fc3..00000000
--- a/libdde-linux26/libdde_linux26/mk/defconfig/config.x86
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Automatically generated by configuration tool: don't edit
-#
-
-#
-# Target Architecture
-#
-BUILD_ARCH_x86=y
-BUILD_ARCH_arm=n
-BUILD_ARCH_amd64=n
-BUILD_ARCH='x86'
-CPU='586'
-BUILD_ABI_l4v2=y
-BUILD_ABI_linux=n
-BUILD_ABI='l4v2'
-
-#
-# Paths and Directories
-#
-DROPS_INSTDIR='$(DROPS_STDDIR)'
-
-#
-# Verboseness and Messages
-#
-DEPEND_VERBOSE_SWITCH=n
-DEPEND_VERBOSE='@'
-VERBOSE_SWITCH=y
-SHOWMESSAGES=y
-BID_COLORED_PHASES=y
-
-#
-# Compilers and Tools
-#
-BIDc_USE_SPECIAL_CC=n
-HOST_CC='gcc'
-HOST_CXX='g++'
-CC='$(SYSTEM_TARGET_x86)gcc -m32'
-CXX='$(SYSTEM_TARGET_x86)g++ -m32'
-
-#
-# Tools
-#
-YACC='byacc'
-LEX='flex'
-CTAGS='ctags'
-ETAGS='etags'
-
-#
-# Options
-#
-HAVE_LDSO=y
-INT_CPP_NAME_SWITCH=y
-INT_LD_NAME_SWITCH=y
-BID_STRIP_PROGS=n
-BID_GSTAB_SW=y
-BID_CFLAGS_GSTAB='-gstabs+'
-BID_GCC_OMIT_FP=n
-BID_GENERATE_MAPFILE=n
-BID_BUILD_DOC=y
-
-#
-# Advanced
-#
-USE_UCLIBC=y
-USE_DIETLIBC=n
-BUILD_LOADER=y
-BUILD_LOADER_PICS='libl4util.a libl4util_root.a libsigma0.a libnames.a libloaderif.a libcon.a libl4rm.a libbootmod.a libcon.a libconstream-server.a libdm_generic.a libdm_mem.a libgeneric_ts.a liblogserver.a liblogserver_capsule.a libsemaphore.a libthread.a libslab.a libgeneric_fprov.a libl4env_err.a libl4env.a libroot.a libc_be_l4env_start_stop.a libc_be_minimal_log_io.a libc_be_simple_mem.a libc_be_mmap.a libc_be_mmap_util.a libuclibc_support.a librtc.a libl4env-l4lx.a'
-L4_CALL_SYSCALLS=y
-L4_ABS_SYSCALLS=y
-BID_CPPFLAGS_SYSCALLS='-DCONFIG_L4_CALL_SYSCALLS -DCONFIG_L4_ABS_SYSCALLS'
-USE_TASKLIB=n
-RELEASE_MODE=n
-BID_BUILD_L4DIR_ONLY=n
-CONFIG_LABEL='__none__'
-
-#
-# Paths
-#
-LINUX24_INCDIR='$(OBJ_BASE)/include/linux-24 $(DROPS_STDDIR)/include/linux-24'
-LINUX26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/linux-26-headers $(DROPS_STDDIR)/include/$(ARCH)/l4/linux-26-headers $(OBJ_BASE)/include/l4/linux-26-headers $(DROPS_STDDIR)/include/l4/linux-26-headers'
-DDE_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux'
-DDE26_INCDIR='$(OBJ_BASE)/include/$(ARCH)/l4/dde_linux26 $(DROPS_STDDIR)/include/$(ARCH)/l4/dde_linux26 $(OBJ_BASE)/include/l4/dde_linux26 $(DROPS_STDDIR)/include/l4/dde_linux26'
-SDL_INCDIR='$(OBJ_BASE)/include/l4/sdl $(DROPS_STDDIR)/include/l4/sdl'
diff --git a/libdde-linux26/libdde_linux26/mk/doc.mk b/libdde-linux26/libdde_linux26/mk/doc.mk
deleted file mode 100644
index 2e102e3a..00000000
--- a/libdde-linux26/libdde_linux26/mk/doc.mk
+++ /dev/null
@@ -1,301 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for doc directories
-#
-# install.inc is used, see there for further documentation
-
-ifeq ($(origin _L4DIR_MK_DOC_MK),undefined)
-_L4DIR_MK_DOC_MK=y
-
-ROLE = doc.mk
-
-include $(L4DIR)/mk/Makeconf
-$(GENERAL_D_LO): $(L4DIR)/mk/doc.mk
-
-ifeq ($(IN_OBJ_DIR),)
-##################################################################
-#
-# Empty IN_OBJ_DIR means we are in the source directory and have 
-# to first generate a Makefile in the build-dir.
-#
-##################################################################
-
-all install clean cleanall help:: $(OBJ_DIR)/Makefile.build
-	$(VERBOSE)PWD=$(OBJ_DIR) $(MAKE) -C $(OBJ_DIR) O=$(OBJ_BASE) -f Makefile.build $@
-
-
-$(OBJ_DIR)/Makefile.build: $(SRC_DIR)/Makefile
-	$(VERBOSE)install -d $(dir $@)
-	$(VERBOSE)echo 'IN_OBJ_DIR=1'                 > $@
-	$(VERBOSE)echo 'L4DIR=$(L4DIR_ABS)'          >> $@
-	$(VERBOSE)echo 'SRC_DIR=$(SRC_DIR)'          >> $@
-	$(VERBOSE)echo 'OBJ_BASE=$(OBJ_BASE)'        >> $@
-	$(VERBOSE)echo 'PKGDIR_ABS=$(PKGDIR_ABS)'    >> $@
-	$(VERBOSE)echo 'vpath %.fig $(SRC_DIR)'      >> $@
-	$(VERBOSE)echo 'vpath %.tex $(SRC_DIR)'      >> $@
-	$(VERBOSE)echo 'include $(SRC_DIR)/Makefile' >> $@
-									
-else
-###################################################################
-#
-# We are in the build directory and can process the documentation
-# 
-###################################################################
-
-# default is to install all targets
-INSTALL_TARGET_MASK ?= %
-
-ifneq ($(TARGET),)
-# if no SRC_DOX is given, but TARGET, extract it from TARGET
-ifeq ($(origin SRC_DOX),undefined)
-SRC_DOX		   := $(filter $(addsuffix .cfg, $(TARGET)),$(wildcard *.cfg))
-ifneq ($(SRC_DOX),)
-$(error SRC_DOX is undefined, but TARGET is defined. This is invalid since 04/23/2003)
-endif
-endif
-# the same for SRC_TEX
-ifeq ($(origin SRC_TEX),undefined)
-SRC_TEX		   := $(filter $(TARGET:.ps=.tex),$(wildcard *.tex)) \
-		      $(filter $(TARGET:.pdf=.tex),$(wildcard *.tex))
-		      $(filter $(TARGET:.dvi=.tex),$(wildcard *.tex))
-ifneq ($(SRC_TEX),)
-$(error SRC_TEX is undefined, but TARGET is defined. This is invalid since 04/23/2003)
-endif
-endif
-endif
-
-TARGET_DOX 	= $(SRC_DOX:.cfg=) $(SRC_DOX_REF:.cfg=) \
-		  $(SRC_DOX_GUIDE:.cfg=) $(SRC_DOX_INT:.cfg=)
-INSTALL_TARGET_DOX ?= $(filter $(INSTALL_TARGET_MASK), $(TARGET_DOX))
-TARGET_TEX 	?= $(SRC_TEX:.tex=.ps) $(SRC_TEX:.tex=.pdf)
-DEPS		+= $(foreach x,$(SRC_TEX:.tex=.dvi),$(dir $x).$(notdir $x).d)
-
-# if no TARGET is given, generate it from all types of targets
-TARGET	   	?= $(TARGET_DOX) $(TARGET_TEX)
-DEPS		+= $(foreach file,$(TARGET),$(dir $(file)).$(notdir $(file)).d)
-
-all:: $(TARGET)
-$(TARGET): $(OBJ_DIR)/.general.d
-
-####################################################################
-#
-# Doxygen specific
-#
-####################################################################
-DOXY_FLAGS += $(DOXY_FLAGS_$@)
-
-OUTPUTDIR = $(shell perl -n -e '/^\s*OUTPUT_DIRECTORY\s*=\s*(\S+)/ && print "$$1\n"' $(1))
-
-# we refer to %/html sometimes. However, make fails on a rule of the form
-# "% %/html:%.cfg", thus the workaround (others than static-pattern-rules
-# won't work)
-$(addprefix $(OBJ_DIR)/,$(addsuffix /html,$(TARGET_DOX))):$(OBJ_DIR)/%/html:$(OBJ_DIR)/%
-
-# We can give an internal rule for doxygen, as the directory specified
-# in the config-file should be the name of the config file with the
-# .cfg removed.
-$(OBJ_DIR)/% $(OBJ_DIR)/%/html:$(SRC_DIR)/%.cfg
-        #generate the flags-file
-	$(VERBOSE)$(MKDIR) $@
-	$(VERBOSE)$(ECHO) '@INCLUDE=$(notdir $<);$(DOXY_FLAGS);OUTPUT_DIRECTORY=$(OBJ_DIR)/$(call OUTPUTDIR,$<)' | $(TR) \; \\n >$@.flags
-	$(VERBOSE)cd $(SRC_DIR) && $(call MAKEDEP,doxygen) OBJ_DIR=$(OBJ_DIR) doxygen $@.flags
-	$(VERBOSE)( [ -r $@/latex/Makefile ] && \
-		echo | PWD=$@/latex $(MAKE) -C $@/latex ) || true
-	$(VERBOSE)if [ -d $@ ] ; then touch $@ ; fi
-
-# Installation rules follow
-#
-# define LOCAL_INSTALLDIR prior to including install.inc, where the install-
-# rules are defined. Same for INSTALLDIR.
-INSTALLDIR_HTML		?= $(DROPS_STDDIR)/doc/html
-INSTALLFILE_HTML	?= $(CP) -pR $(1) $(2)
-INSTALLDIR_HTML_LOCAL	?= $(OBJ_BASE)/doc/html
-INSTALLFILE_HTML_LOCAL	?= for f in $(wildcard $(call absfilename,$(1))); do $(LN) -sf $$f $(2); done
-
-INSTALLDIR		= $(INSTALLDIR_HTML)
-INSTALLFILE		= $(INSTALLFILE_HTML)
-INSTALLDIR_LOCAL	= $(INSTALLDIR_HTML_LOCAL)
-INSTALLFILE_LOCAL	= $(INSTALLFILE_HTML_LOCAL)
-
-all::	$(TARGET) \
-        $(addprefix $(INSTALLDIR_LOCAL)/, $(addsuffix .title, $(INSTALL_TARGET_DOX)))
-
-$(OBJ_DIR)/$(SRC_DOX_REF:.cfg=.title): BID_DOC_DOXTYPE=ref
-$(OBJ_DIR)/$(SRC_DOX_GUIDE:.cfg=.title): BID_DOC_DOXTYPE=guide
-$(OBJ_DIR)/$(SRC_DOX_INT:.cfg=.title): BID_DOC_DOXTYPE=int
-
-# first line: type
-# second line: title that will appear at the generated index page
-$(OBJ_DIR)/%.title:$(SRC_DIR)/%.cfg $(OBJ_DIR)/.general.d
-	$(VERBOSE)$(ECHO) $(BID_DOC_DOXTYPE)>$@
-	$(VERBOSE)MAKEFLAGS= $(MAKE) -s -f $(L4DIR)/mk/makehelpers.inc -f $< \
-	   BID_print VAR=PROJECT_NAME >>$@
-
-# Install the title file locally
-# The installed title file depends on the installed doku for message reasons
-$(foreach f,$(INSTALL_TARGET_DOX),$(INSTALLDIR_LOCAL)/$(f).title):$(INSTALLDIR_LOCAL)/%.title:$(OBJ_DIR)/%.title $(INSTALLDIR_LOCAL)/%
-	$(VERBOSE)$(call INSTALLFILE_LOCAL,$<,$@)
-	@$(call UPDATE_HTML_MESSAGE,$(INSTALLDIR_LOCAL))
-
-# Install the docu locally, the title file will depend on
-$(foreach f,$(INSTALL_TARGET_DOX),$(INSTALLDIR_LOCAL)/$(f)):$(INSTALLDIR_LOCAL)/%:$(OBJ_DIR)/% $(OBJ_DIR)/%/html
-	@$(INSTALL_DOC_LOCAL_MESSAGE)
-	$(VERBOSE)$(INSTALL) -d $@
-	$(VERBOSE)$(call INSTALLFILE_LOCAL,$</html/*,$@) 
-
-# Install the title file globally
-# The installed title file depends on the installed doku for message reasons
-$(foreach f,$(INSTALL_TARGET_DOX),$(INSTALLDIR)/$(f).title):$(INSTALLDIR)/%.title:$(OBJ_DIR)/%.title $(INSTALLDIR)/%
-	$(VERBOSE)$(call INSTALLFILE,$<,$@)
-	@$(call UPDATE_HTML_MESSAGE,$(INSTALLDIR))
-
-# Install the docu globally, the title file will depend on
-$(foreach f,$(INSTALL_TARGET_DOX),$(INSTALLDIR)/$(f)):$(INSTALLDIR)/%:$(OBJ_DIR)/% $(OBJ_DIR)/%/html
-	@$(INSTALL_DOC_MESSAGE)
-	$(if $(INSTALLFILE),$(VERBOSE)$(INSTALL) -d $@)
-	$(VERBOSE)$(call INSTALLFILE,$</html/*,$@)
-
-install:: $(addprefix $(INSTALLDIR)/,$(addsuffix .title,$(INSTALL_TARGET_DOX)))
-.PHONY: $(addprefix $(INSTALLDIR)/,$(INSTALL_TARGET_DOX) \
-				   $(addsuffix .title,$(INSTALL_TARGET_DOX)))
-
-
-#################################################################
-#
-# Latex specific
-#
-#################################################################
-
-FIG2EPS_PROG ?= fig2dev -L eps
-FIG2PDF_PROG ?= fig2dev -L pdf
-FIG2PNG_PROG ?= fig2dev -L png
-
-$(SRC_TEX:.tex=.dvi) $(TARGET): $(SRC_FIG:.fig=.pdf) $(SRC_FIG:.fig=.png) $(SRC_FIG:.fig=.eps)
-
-%.eps: %.fig $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(FIG2EPS_PROG) $< $@
-
-%.pdf: %.fig $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(FIG2PDF_PROG) $< $@
-
-%.png: %.fig $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(FIG2PNG_PROG) $< $@
-
-%.ps: %.dvi $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,dvips) dvips -o $@ $<
-	$(VERBOSE)$(VIEWERREFRESH_PS)
-
-%.pdf: %.tex $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(PDFLATEX) $< || \
-		(($(GREP) 'TeX capacity exceeded' $*.log && \
-		echo -e "\n\033[31mIncrease pool_size to 200000 in" \
-		"/etc/texmf/texmf.cnf!\033[m\n" && false) || false)
-	$(VERBOSE)$(GREP) '\citation' $*.aux && \
-		bibtex $* || true
-	$(VERBOSE)(export size=1; touch $@; \
-		until [ $$size -eq `ls -o $@ | awk '{print $$4}'` ]; do\
-		  export size=`ls -o $@ | awk '{print $$4}'` ;\
-		  $(PDFLATEX) $< ;\
-		done)
-# one more time, just to be sure ...
-	$(VERBOSE)$(PDFLATEX) $<
-
-%.dvi: %.tex $(OBJ_DIR)/.general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(LATEX)) $(LATEX) $<
-	$(VERBOSE)if grep -q '\indexentry' $*.idx; then makeindex $*; fi
-	$(VERBOSE)if grep -q '\citation' $*.aux; then bibtex $*; fi
-        # Do we really need to call latex unconditionally again? Isn't it
-        # sufficient to check the logfile for the "rerun" text?
-	$(VERBOSE)$(LATEX) $<
-	$(VERBOSE)latex_count=5 ; \
-	while egrep -s 'Rerun (LaTeX|to get cross-references right)' $*.log &&\
-		[ $$latex_count -gt 0 ] ; do \
-		$(LATEX) $< \
-		let latex_count=$$latex_count-1 ;\
-	done
-	$(VERBOSE)$(VIEWERREFRESH_DVI)
-
-SHOWTEX ?= $(firstword $(SRC_TEX))
-SHOWDVI ?= $(SHOWTEX:.tex=.dvi)
-SHOWPS  ?= $(SHOWTEX:.tex=.ps)
-SHOWPDF ?= $(SHOWTEX:.tex=.pdf)
-
-VIEWER_DVI	  ?= xdvi
-VIEWER_PS         ?= gv
-VIEWER_PDF	  ?= xpdf
-VIEWERREFRESH_DVI ?= killall -USR1 xdvi xdvi.bin xdvi.real || true
-VIEWERREFRESH_PS  ?= killall -HUP $(VIEWER_PS) || true
-
-dvi:	$(SHOWDVI)
-show showdvi: dvi
-	$(VERBOSE)$(VIEWER_DVI) $(SHOWDVI) &
-
-ps:	$(SHOWPS)
-showps: ps
-	$(VERBOSE)$(VIEWER_PS) $(SHOWPS) &
-
-pdf:	$(SHOWPDF)
-showpdf: pdf
-	$(VERBOSE)$(VIEWER_PDF) $(SHOWPDF) &
-
-clean::
-	$(VERBOSE)$(RM) $(addprefix $(OBJ_DIR)/, \
-		$(addsuffix .title,$(TARGET_DOX)))
-	$(VERBOSE)$(RM) $(addprefix $(OBJ_DIR)/, \
-		$(addsuffix .flags,$(TARGET_DOX)))
-	$(VERBOSE)$(RM) $(wildcard $(addprefix $(OBJ_DIR)/, $(foreach ext, \
-		aux bbl blg dvi idx ilg ind log lod ltf toc out, \
-		$(SRC_TEX:.tex=.$(ext))) texput.log ))
-
-cleanall:: clean
-	$(VERBOSE)$(RM) -r $(wildcard $(addprefix $(OBJ_DIR)/, \
-		$(TARGET)) $(wildcard .*.d))
-	$(VERBOSE)$(RM) $(wildcard $(addprefix $(OBJ_DIR)/, \
-		$(SRC_TEX:.tex=.ps) $(SRC_TEX:.tex=.pdf)))
-	$(VERBOSE)$(RM) $(wildcard $(addprefix $(OBJ_DIR)/, \
-		$(SRC_FIG:.fig=.eps) $(SRC_FIG:.fig=.pdf) $(SRC_FIG:.fig=.png)))
-	$(VERBOSE)$(RM) $(wildcard $(addprefix $(OBJ_DIR)/, \
-		Makefile Makefile.build))
-
-.PHONY: all clean cleanall config help install oldconfig txtconfig
-.PHONY: ps pdf dvi showps showpdf showdvi show
-
-help::
-	@echo "Specify a target:"
-	@echo "all       - generate documentation and install locally"
-ifneq (,$(INSTALL_TARGET_DOX))
-	@echo "install   - generate documentation and install globally"
-endif
-	@echo "dvi       - compile the primary TeX file into dvi"
-	@echo "showdvi   - invoke the dvi viewer on the primary TeX file"
-	@echo "ps        - compile the primary TeX file into ps"
-	@echo "showps    - invoke the ps viewer on the primary TeX file"
-	@echo "pdf       - compile the primary TeX file into pdf"
-	@echo "showpdf   - invoke the pdf viewer on the primary TeX file"
-	@echo "clean     - delete generated intermediate files"
-	@echo "cleanall  - delete all generated files"
-	@echo "help      - this help"
-	@echo
-ifneq (,$(SRC_TEX))
-	@echo "Primary TeX file: $(SHOWTEX)"
-	@echo "Other documentation to be built: $(filter-out $(SHOWPDF) $(SHOWPS) $(SHOWDVI),$(TARGET))"
-else
-ifneq (,$(TARGET_DOX))
-	@echo "Primary Doxygen file: $(addsuffix .cfg, $(TARGET_DOX))"
-endif
-	@echo "Documentation to be built: $(TARGET)"
-endif
-
--include $(DEPSVAR)
-
-endif   # IN_OBJ_DIR
-
-endif	# _L4DIR_MK_DOC_MK undefined
diff --git a/libdde-linux26/libdde_linux26/mk/export_defs.inc b/libdde-linux26/libdde_linux26/mk/export_defs.inc
deleted file mode 100644
index 8fde1316..00000000
--- a/libdde-linux26/libdde_linux26/mk/export_defs.inc
+++ /dev/null
@@ -1,35 +0,0 @@
-# Makefile snippet to generate l4defs.inc file
-# vim:set ft=make:
-#
-
-PKGDIR = .
-SYSTEMS = $(BUILD_ARCH)-$(BUILD_ABI)
-MODE	= l4env
-
-OBJ_DIR = $(SRC_DIR)/build
-
-ifneq ($(SYSTEM),)
-
-# take crt0.o from the install directory
-L4_CRT0     = $(patsubst $(L4_BUILDDIR)%, $(DROPS_STDDIR)/%, $(CRT0))
-# use the DICE directory in the install directory
-L4_DICEDIR  = $(patsubst $(L4DIR)/%, $(DROPS_STDDIR)/%, $(DICE_INCDIR))
-# let LDFLAGS and CFLAGS only contain directories within the install path
-L4_LDFLAGS  = $(filter-out -L$(L4_BUILDDIR)%, $(patsubst -T$(L4_BUILDDIR)%, -T$(DROPS_STDDIR)/%, $(LDFLAGS)))
-L4_CPPFLAGS = $(filter-out -I$(L4_BUILDDIR)%, $(patsubst -I$(DICE_INCDIR), -I$(L4_DICEDIR), $(CPPFLAGS)))
-
-# the target file
-L4DEF_FILE ?= l4defs.inc
-
-all::
-	@echo -e $(EMPHSTART)"Creating $(L4DEF_FILE)"$(EMPHSTOP)
-	@echo "# Definitions for L4 BID"                         > $(L4DEF_FILE)
-	@echo "# --- Automatically created on install, do not modify ---" >> $(L4DEF_FILE)
-	@echo "L4_CRT0 = $(L4_CRT0)"                            >> $(L4DEF_FILE)
-	@echo "L4_LDFLAGS = $(L4_LDFLAGS)"                      >> $(L4DEF_FILE)
-	@echo "L4_CPPFLAGS = $(L4_CPPFLAGS)"                    >> $(L4DEF_FILE)
-else
-all::
-endif
-
-include $(L4DIR)/mk/prog.mk
diff --git a/libdde-linux26/libdde_linux26/mk/idl.mk b/libdde-linux26/libdde_linux26/mk/idl.mk
deleted file mode 100644
index 1301dc5b..00000000
--- a/libdde-linux26/libdde_linux26/mk/idl.mk
+++ /dev/null
@@ -1,206 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for idl directories
-#
-# $Id: idl.mk 240 2007-11-27 03:55:44Z l4check $
-#
-# $Author: l4check $
-#
-# install.inc is used, see there for further documentation
-#		- from install.inc, we use the feature to install files
-#		  to the local install directory on 'all' target.
-#		  Therefore, we set INSTALLDIR_LOCAL and INSTALLFILE_LOCAL.
-#		  Note that we changed INSTALLDIR_IDL_LOCAL AND INSTALLDIR_IDL
-# binary.inc is used, see there for further documentation
-
-ifeq ($(origin _L4DIR_MK_IDL_MK),undefined)
-_L4DIR_MK_IDL_MK=y
-
-ROLE = idl.mk
-
-DICE_REQ := --require="3.2.0"
-
-# define LOCAL_INSTALLDIR prior to including install.inc, where the install-
-# rules are defined. Same for INSTALLDIR.
-INSTALLDIR_IDL		?= $(DROPS_STDDIR)/include/$(ARCH)/$(L4API)/$(INSTALL_INC_PREFIX)
-INSTALLDIR_IDL_LOCAL	?= $(OBJ_BASE)/include/$(ARCH)/$(L4API)/$(INSTALL_INC_PREFIX)
-INSTALLFILE_IDL		?= $(INSTALL) -m 644 $(1) $(2)
-INSTALLFILE_IDL_LOCAL	?= $(LN) -sf $(call absfilename,$(1)) $(2)
-
-INSTALLFILE		= $(INSTALLFILE_IDL)
-INSTALLDIR		= $(INSTALLDIR_IDL)
-INSTALLFILE_LOCAL	= $(INSTALLFILE_IDL_LOCAL)
-INSTALLDIR_LOCAL	= $(INSTALLDIR_IDL_LOCAL)
-
-INSTALL_INC_PREFIX     ?= l4/$(PKGNAME)
-
-# our default MODE is 'l4env'
-MODE			?= l4env
-
-IDL_EXPORT_STUB ?= %
-IDL_EXPORT_IDL	?= %
-
-include $(L4DIR)/mk/Makeconf
-include $(L4DIR)/mk/binary.inc
-$(GENERAL_D_LOC): $(L4DIR)/mk/idl.mk
-
-ifneq ($(SYSTEM),) # if we have a system, really build
-#######################################################
-#
-# SYSTEM valid, we are in an OBJ-<xxx> system subdir
-#
-#######################################################
-
-IDL_EXPORT_STUB ?= %
-IDL_TYPE	?= dice
-
-# C++ specific rules
-IDL_C		= c
-IDL_H		= h
-IDL_CPP		= $(CC)
-ifneq (,$(findstring BmCPP,$(IDL_FLAGS)))
-IDL_C		= cc
-IDL_H		= hh
-IDL_CPP		= $(CXX)
-else
-ifneq (,$(findstring Bmcpp,$(IDL_FLAGS)))
-IDL_C		= cc
-IDL_H		= hh
-IDL_CPP		= $(CXX)
-endif
-endif
-
-IDL_DEP =		$(addprefix .,$(addsuffix .d,$(notdir $(IDL))))
-IDL_SKELETON_C =	$(IDL:.idl=-server.$(IDL_C))
-IDL_SKELETON_H =	$(IDL_SKELETON_C:.$(IDL_C)=.$(IDL_H))
-IDL_STUB_C =		$(IDL:.idl=-client.$(IDL_C))
-IDL_STUB_H = 		$(IDL_STUB_C:.$(IDL_C)=.$(IDL_H))
-IDL_OPCODE_H =		$(IDL:.idl=-sys.$(IDL_H))
-
-IDL_FILES = $(IDL_SKELETON_C) $(IDL_SKELETON_H) $(IDL_STUB_C) $(IDL_STUB_H) \
-	    $(IDL_OPCODE_H)
-
-# Makro that expands to the list of generated files
-# arg1 - name of the idl file. Path and extension will be stripped
-IDL_FILES_EXPAND =	$(addprefix $(notdir $(basename $(1))),-server.$(IDL_C) -server.$(IDL_H) -client.$(IDL_C) -client.$(IDL_H) -sys.$(IDL_H))
-
-INSTALL_TARGET = $(patsubst %.idl,%-sys.$(IDL_H),		\
-		   $(filter $(IDL_EXPORT_SKELETON) $(IDL_EXPORT_STUB),$(IDL)))\
-		 $(patsubst %.idl,%-server.$(IDL_H),		\
-		   $(filter $(IDL_EXPORT_SKELETON),$(IDL)))		\
-		 $(patsubst %.idl,%-client.$(IDL_H),		\
-		   $(filter $(IDL_EXPORT_STUB), $(IDL)))
-
-all:: $(IDL_FILES)
-.DELETE_ON_ERROR:
-
-# the dependencies for the generated files
-DEPS		+= $(IDL_DEP)
-
-ifneq (,$(filter-out corba dice, $(IDL_TYPE)))
-$(error IDL_TYPE is neither <dice> nor <corba>)
-endif
-
-# the IDL file is found one directory up
-vpath %.idl $(SRC_DIR)
-
-# DICE mode
-IDL_FLAGS	+= $(addprefix -P,$(CPPFLAGS))
-IDL_FLAGS	+= $(IDL_FLAGS_$(<F))
-
-ifeq ($(L4API),l4v2)
-IDL_FLAGS	+= -Bifiasco
-endif
-
-ifeq ($(L4API),l4v4)
-IDL_FLAGS	+= -Biv4
-endif
-
-ifeq ($(L4API),l4x2)
-IDL_FLAGS	+= -Bix2
-endif
-
-ifeq ($(L4API),linux)
-IDL_FLAGS	+= -Bisock
-endif
-
-ifeq ($(L4API),l4secv2emu)
-IDL_FLAGS	+= -fforce-c-bindings -P-DL4API_l4v2
-endif
-
-ifeq ($(ARCH),x86)
-IDL_FLAGS	+= -Bpia32
-endif
-
-ifeq ($(ARCH),arm)
-IDL_FLAGS	+= -Bparm
-endif
-
-ifeq ($(ARCH),amd64)
-IDL_FLAGS	+= -Bpamd64
-endif
-
-ifeq ($(IDL_TYPE),corba)
-IDL_FLAGS	+= --x=corba
-endif
-
-# We don't use gendep for generating the dependencies because gendep can only
-# catch open() calls from _one_ applications. Here two applications, dice and
-# the preprocessor perform open.
-%-server.$(IDL_C) %-server.$(IDL_H) %-client.$(IDL_C) %-client.$(IDL_H) %-sys.$(IDL_H): %.idl .general.d
-	@$(GEN_MESSAGE)
-	$(VERBOSE)CC="$(IDL_CPP)" $(DICE) $(DICE_REQ) $(IDL_FLAGS) -MD $<
-	$(VERBOSE)mv $*.d .$(<F).d
-	$(DEPEND_VERBOSE)$(ECHO) "$(call IDL_FILES_EXPAND,$<): $(DICE) $<" >>.$(<F).d
-	$(DEPEND_VERBOSE)$(ECHO) "$(DICE) $<:" >>.$(<F).d
-
-
-clean cleanall::
-	$(VERBOSE)$(RM) $(wildcard $(addprefix $(INSTALLDIR_LOCAL)/, $(IDL_FILES)))
-	$(VERBOSE)$(RM) $(wildcard $(IDL_FILES))
-
-# include install.inc to define install rules
-include $(L4DIR)/mk/install.inc
-
-else
-#####################################################
-#
-# No SYSTEM defined, we are in the idl directory
-#
-#####################################################
-
-# we install the IDL-files specified in IDL_EXPORT_IDL
-INSTALL_TARGET = $(filter $(IDL_EXPORT_IDL), $(IDL))
-
-# include install.inc to define install rules
-include $(L4DIR)/mk/install.inc
-
-# install idl-files before going down to subdirs
-$(foreach arch,$(TARGET_SYSTEMS), $(OBJ_DIR)/OBJ-$(arch)): $(addprefix $(INSTALLDIR_LOCAL)/,$(INSTALL_TARGET))
-
-endif	# architecture is defined, really build
-#####################################################
-#
-# Common part
-#
-#####################################################
-
--include $(DEPSVAR)
-.PHONY: all clean cleanall config help install oldconfig txtconfig
-
-help::
-	@echo "  all            - generate .c and .h from idl files and install locally"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR_LOCAL)"
-endif
-	@echo "  scrub          - delete backup and temporary files"
-	@echo "  clean          - delete generated source files"
-	@echo "  cleanall       - delete all generated, backup and temporary files"
-	@echo "  help           - this help"
-	@echo
-	@echo "  idls are: $(IDL)"
-
-
-endif	# _L4DIR_MK_IDL_MK undefined
diff --git a/libdde-linux26/libdde_linux26/mk/include.mk b/libdde-linux26/libdde_linux26/mk/include.mk
deleted file mode 100644
index d42ea959..00000000
--- a/libdde-linux26/libdde_linux26/mk/include.mk
+++ /dev/null
@@ -1,88 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for include directories
-#
-# $Id: include.mk 240 2007-11-27 03:55:44Z l4check $
-#
-# $Author: l4check $
-
-#
-# supported targets:
-#
-#   all				- the default, link the includes into the
-#				  local include dir
-#   install			- install the includes into the global
-#				  include dir
-#   config			- do nothing, may be overwritten
-#   relink			- reinstall locally
-
-
-INSTALLDIR_INC		?= $(DROPS_STDDIR)/include
-INSTALLDIR_INC_LOCAL	?= $(OBJ_BASE)/include
-
-INSTALLDIR		= $(INSTALLDIR_INC)
-INSTALLDIR_LOCAL	= $(INSTALLDIR_INC_LOCAL)
-
-ifeq ($(origin TARGET),undefined)
-# use POSIX -print here
-TARGET_CMD		= (cd $(INCSRC_DIR); find . -name '*.[ih]' -print)
-else
-TARGET_CMD		= echo $(TARGET)
-endif
-INSTALL_INC_PREFIX	?= l4/$(PKGNAME)
-INCSRC_DIR		?= $(SRC_DIR)
-
-include $(L4DIR)/mk/Makeconf
-$(GENERAL_D_LOC): $(L4DIR)/mk/include.mk
--include $(DEPSVAR)
-
-do_link = if (readlink($$dst) ne $$src) {                                     \
-            if ($$notify eq 1) {                                              \
-              $$notify=0; $(if $(VERBOSE),print "  ... Updating symlinks\n";,)\
-            }                                                                 \
-            system("ln","-sf$(if $(VERBOSE),,v)",$$src,$$dst) && exit 1;      \
-          }
-do_inst = system("install","-$(if $(VERBOSE),,v)m","644",$$src,$$dst) && exit 1;
-installscript = perl -e '                                                     \
-  chomp($$srcdir="$(INCSRC_DIR)");                                            \
-  $$notify=1;                                                                 \
-  while(<>) {                                                                 \
-    @_ = split; while(@_) {                                                        \
-      $$_=shift @_; s|^\./||; $$src=$$_;                                      \
-      if(s|^ARCH-([^/]*)/L4API-([^/]*)/([^ ]*)$$|\1/\2/$(INSTALL_INC_PREFIX)/\3| ||\
-	 s|^ARCH-([^/]*)/([^ ]*)$$|\1/$(INSTALL_INC_PREFIX)/\2| ||            \
-	 s|^L4API-([^/]*)/([^ ]*)$$|\1/$(INSTALL_INC_PREFIX)/\2| ||           \
-	 s|^([^ ]*)$$|$(INSTALL_INC_PREFIX)/\1|) {                            \
-	    $$src="$$srcdir/$$src" if $$src !~ /^\//;                         \
-	    $$dstdir=$$dst="$(if $(1),$(INSTALLDIR_LOCAL),$(INSTALLDIR))/$$_";\
-	    $$dstdir=~s|/[^/]*$$||;                                           \
-	    -d $$dstdir || system("install","-$(if $(VERBOSE),,v)d",$$dstdir) && exit 1;        \
-	    $(if $(1),$(do_link),$(do_inst))                                  \
-	  }                                                                   \
-    }                                                                         \
-  }'
-
-headers::
-
-all:: headers
-	@$(TARGET_CMD) | $(call installscript,1)
-
-install::
-	@$(INSTALL_LINK_MESSAGE)
-	@$(TARGET_CMD) | $(call installscript);
-
-cleanall::
-	$(VERBOSE)$(RM) .general.d
-
-help::
-	@echo "  all            - install files to $(INSTALLDIR_LOCAL)"
-	@echo "  install        - install files to $(INSTALLDIR)"
-	@echo "  scrub          - delete backup and temporary files"
-	@echo "  clean          - same as scrub"
-	@echo "  cleanall       - same as scrub"
-	@echo "  help           - this help"
-
-scrub clean cleanall::
-	$(VERBOSE)$(SCRUB)
diff --git a/libdde-linux26/libdde_linux26/mk/install.inc b/libdde-linux26/libdde_linux26/mk/install.inc
deleted file mode 100644
index 3cdbecf3..00000000
--- a/libdde-linux26/libdde_linux26/mk/install.inc
+++ /dev/null
@@ -1,66 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Include for install-rules
-#
-# $Id: install.inc 11 2007-02-26 19:08:41Z l4check $
-#
-# $Author: l4check $
-#
-# This file is useful only when actually building files, thus if
-# BUILD_ONE_ARCHITECTURE (see Makeconf) is defined.
-# INSTALL_TARGET and INSTALL_TARGET_$(ARCH) contain the targets to be
-# installed. If they are both empty, and NOTARGETSTOINSTALL is not set,
-# they are set to TARGET and TARGET_$(ARCH).
-#
-# INSTALLDIR and INSTALLDIR_LOCAL is the dir the files will be installed 
-# in and must be set prior to including this file. INSTALLDIR is used by the
-# target "install" and "INSTALLDIR_LOCAL" by the target "all".
-#
-# The target "all" is made depending on the installed files in
-# INSTALLDIR_LOCAL. "install" on the files in INSTALLDIR. An other
-# difference is that "all" results in using the variable
-# $(INSTALLFILE_LOCAL) to install the files and "install" in using
-# $(INSTALLFILE). This allows the difference between linking and actually
-# copying (with stripping for bins).
-
-ifndef INSTALL_TARGET_$(OSYSTEM)
-ifndef NOTARGETSTOINSTALL
-INSTALL_TARGET?=$(TARGET)
-endif
-endif
-INSTALL_TARGET += $(INSTALL_TARGET_$(OSYSTEM))
-
-all::	$(addprefix $(INSTALLDIR_LOCAL)/,$(INSTALL_TARGET))
-install:: $(addprefix $(INSTALLDIR)/,$(INSTALL_TARGET))
-
-# with prog.mk, we copy
-ifeq ($(ROLE),prog.mk)
-$(foreach f,$(INSTALL_TARGET),$(INSTALLDIR_LOCAL)/$(f)):$(INSTALLDIR_LOCAL)/%:%
-	@$(INSTALL_LOCAL_MESSAGE)
-	$(if $(INSTALLFILE_LOCAL),$(VERBOSE)$(INSTALL) -d $(dir $@))
-	$(VERBOSE)$(call INSTALLFILE_LOCAL,$<,$@)
-else
-# with others, we symlink
-# we check for each locally installed lib if the symlink is correct
-.PHONY: $(addprefix $(INSTALLDIR_LOCAL)/,$(INSTALL_TARGET))
-$(foreach f,$(INSTALL_TARGET),$(INSTALLDIR_LOCAL)/$(f)):$(INSTALLDIR_LOCAL)/%:%
-	@$(if $(INSTALLFILE_LOCAL),if [ ! $< -ef $@ ] ; then \
-		$(if $(INSTALL_LOCAL_MESSAGE),$(INSTALL_LOCAL_MESSAGE);) \
-		$(INSTALL) -d $(dir $@); \
-		$(call INSTALLFILE_LOCAL,$<,$@); \
-		fi)
-endif
-
-$(foreach f,$(INSTALL_TARGET),$(INSTALLDIR)/$(f)):$(INSTALLDIR)/%:%
-	@$(INSTALL_MESSAGE)
-	$(if $(INSTALLFILE),$(VERBOSE)$(INSTALL) -d $(dir $@))
-	$(VERBOSE)$(call INSTALLFILE,$<,$@)
-
-# unconditionally install on "make install"
-.PHONY: $(addprefix $(INSTALLDIR)/,$(INSTALL_TARGET))
-
-.general.d: $(L4DIR)/mk/install.inc
-
diff --git a/libdde-linux26/libdde_linux26/mk/lib.mk b/libdde-linux26/libdde_linux26/mk/lib.mk
deleted file mode 100644
index 761ddb98..00000000
--- a/libdde-linux26/libdde_linux26/mk/lib.mk
+++ /dev/null
@@ -1,113 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for library directories
-#
-# $Id: lib.mk 240 2007-11-27 03:55:44Z l4check $
-#
-# $Author: l4check $
-#
-# install.inc is used, see there for further documentation
-# binary.inc is used, see there for further documentation
-
-
-ifeq ($(origin _L4DIR_MK_LIB_MK),undefined)
-_L4DIR_MK_LIB_MK=y
-
-ROLE = lib.mk
-
-# define INSTALLDIRs prior to including install.inc, where the install-
-# rules are defined. Same for INSTALLDIR.
-INSTALLDIR_LIB		?= $(DROPS_STDDIR)/lib/$(subst -,/,$(SYSTEM))
-INSTALLDIR_LIB_LOCAL	?= $(OBJ_BASE)/lib/$(subst -,/,$(SYSTEM))
-INSTALLFILE_LIB		?= $(INSTALL) -m 644 $(1) $(2)
-INSTALLFILE_LIB_LOCAL	?= $(LN) -sf $(call absfilename,$(1)) $(2)
-
-INSTALLFILE		= $(INSTALLFILE_LIB)
-INSTALLDIR		= $(INSTALLDIR_LIB)
-INSTALLFILE_LOCAL	= $(INSTALLFILE_LIB_LOCAL)
-INSTALLDIR_LOCAL	= $(INSTALLDIR_LIB_LOCAL)
-
-# our mode
-MODE			?= l4env
-
-# include all Makeconf.locals, define common rules/variables
-include $(L4DIR)/mk/Makeconf
-include $(L4DIR)/mk/binary.inc
-$(GENERAL_D_LOC): $(L4DIR)/mk/lib.mk
-
-ifneq ($(SYSTEM),) # if we a system, really build
-
-TARGET_LIB      := $(TARGET) $(TARGET_$(OSYSTEM))
-TARGET_SHARED   := $(filter %.s.so,$(TARGET_LIB))
-TARGET_STANDARD := $(filter-out %.s.so,$(TARGET_LIB))
-TARGET_PROFILE  := $(patsubst %.a,%.pr.a,\
-			$(filter $(BUILD_PROFILE),$(TARGET_STANDARD)))
-TARGET_PROFILE_SHARED := $(filter %.s.so,$(TARGET_PROFILE))
-TARGET_PIC      := $(patsubst %.a,%.p.a,\
-			$(filter $(BUILD_PIC),$(TARGET_STANDARD)))
-TARGET_PROFILE_PIC := $(patsubst %.a,%.p.a,\
-			$(filter $(BUILD_PIC),$(TARGET_PROFILE)))
-TARGET	+= $(TARGET_$(OSYSTEM)) $(TARGET_PIC)
-TARGET	+= $(TARGET_PROFILE) $(TARGET_PROFILE_SHARED) $(TARGET_PROFILE_PIC)
-
-# define some variables different for lib.mk and prog.mk
-LDFLAGS += $(addprefix -L, $(PRIVATE_LIBDIR) $(PRIVATE_LIBDIR_$(OSYSTEM)) $(PRIVATE_LIBDIR_$@) $(PRIVATE_LIBDIR_$@_$(OSYSTEM)))
-LDFLAGS += $(addprefix -L, $(L4LIBDIR)) $(LIBCLIBDIR)
-LDFLAGS	+= $(LIBS) $(LDFLAGS_$@) $(LDNOSTDLIB)
-
-LDSCRIPT = $(call findfile,main_rel.ld,$(L4LIBDIR))
-
-# install.inc eventually defines rules for every target
-#include $(L4DIR)/mk/install.inc
-
-DEPS	+= $(foreach file,$(TARGET), $(dir $(file)).$(notdir $(file)).d)
-
-$(filter-out %.s.so %.o.a %.o.pr.a, $(TARGET)):%.a: $(OBJS)
-	@$(AR_MESSAGE)
-	$(VERBOSE)$(RM) $@
-	$(VERBOSE)$(AR) crs $@ $(OBJS)
-	@$(BUILT_MESSAGE)
-
-# shared lib
-$(filter %.s.so, $(TARGET)):%.s.so: $(OBJS) $(CRTP) $(LIBDEPS)
-	@$(LINK_SHARED_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(LD)) $(LD) -m $(LD_EMULATION) \
-	   -o $@ -shared $(addprefix -T,$(LDSCRIPT)) $(CRTP) $(OBJS) $(LDFLAGS)
-	@$(BUILT_MESSAGE)
-
-# build an object file (which looks like a lib to a later link-call), which
-# is either later included as a whole or not at all (important for static
-# constructors)
-$(filter %.o.a %.o.pr.a, $(TARGET)):%.a: $(OBJS) $(LIBDEPS)
-	@$(LINK_PARTIAL_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(LD)) $(LD) -m $(LD_EMULATION) \
-	   -o $@ -r $(OBJS) $(LDFLAGS)
-	@$(BUILT_MESSAGE)
-
-endif	# architecture is defined, really build
-
-.PHONY: all clean cleanall config help install oldconfig txtconfig
--include $(DEPSVAR)
-help::
-	@echo "  all            - compile and install the libraries locally"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR_LOCAL)"
-endif
-	@echo "  install        - compile and install the libraries globally"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR)"
-endif
-	@echo "  scrub          - delete backup and temporary files"
-	@echo "  clean          - delete generated object files"
-	@echo "  cleanall       - delete all generated, backup and temporary files"
-	@echo "  help           - this help"
-	@echo
-ifneq ($(SYSTEM),)
-	@echo "  libraries are: $(TARGET)"
-else
-	@echo "  build for architectures: $(TARGET_SYSTEMS)"
-endif
-
-endif	# _L4DIR_MK_LIB_MK undefined
diff --git a/libdde-linux26/libdde_linux26/mk/makehelpers.inc b/libdde-linux26/libdde_linux26/mk/makehelpers.inc
deleted file mode 100644
index 60030cf3..00000000
--- a/libdde-linux26/libdde_linux26/mk/makehelpers.inc
+++ /dev/null
@@ -1,15 +0,0 @@
-# -*- Makefile -*-
-# vim:set ft=make:
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-include to extract variables from Makefile-compatible files
-#
-# We use this file to browse doxygen files in the doc.mk rules.
-
-BID_print:
-	@echo $($(VAR))
-BID_printm:
-	@$(foreach v, $(VARS), echo '$(v)=$($(v))';)
-
-.PHONY: BID_print BID_printm
diff --git a/libdde-linux26/libdde_linux26/mk/modes.inc b/libdde-linux26/libdde_linux26/mk/modes.inc
deleted file mode 100644
index 5cb1ef77..00000000
--- a/libdde-linux26/libdde_linux26/mk/modes.inc
+++ /dev/null
@@ -1,575 +0,0 @@
-# -*- Makefile -*-
-# vim:et:ts=8:ft=make:
-#
-# Makefile-Include for defining modes
-
-# Default memory backend when linking against uClibc. The -u
-# switch is necessary since mmap_anon is referenced using a weak symbol.
-MALLOC_BACKEND     ?= -u mmap_anon -lc_be_simple_mem
-
-MMAP_BACKEND       ?= -lc_be_sigma0_mem
-
-# Default is uClibc without reentrant functions. If, for example
-# two independant threads of the same application call malloc at the same
-# time, WANT_THREADSAFE _must_ be defined.
-ifneq ("$(WANT_THREADSAFE)","")
-UCLIBC_IMPLEMENTATION   := -luc_c_r
-else
-UCLIBC_IMPLEMENTATION   := -luc_c
-endif
-
-ROOTLIB  = -lroot
-ROOTPLIB = -lroot.p
-
-CRT0_DEFAULT = $(call findfile,crt0.o,$(L4LIBDIR))
-CRTP_DEFAULT = $(call findfile,crt0.s.o,$(L4LIBDIR))
-LDS_DEFAULT  = $(call findfile,main_stat.ld,$(L4LIBDIR))
-
-ifeq ($(MODE),loader)
-LDS_LOADER   = $(call findfile,main_dyn.ld,$(L4LIBDIR))
-else
-LDS_LOADER   = $(LDS_DEFAULT)
-endif
-
-#LIBC_INCLUDE   = -nostdinc                                  
-#                 -I$(OBJ_BASE)/include/$(ARCH)/uclibc      \
-#                 -I$(OBJ_BASE)/include/uclibc              \
-#                 -I$(OBJ_BASE)/include/uclibc++            \
-#                 -I$(DROPS_STDDIR)/include/$(ARCH)/uclibc  \
-#                 -I$(DROPS_STDDIR)/include/uclibc          \
-#                 -I$(DROPS_STDDIR)/include/uclibc++        \
-#                 $(I_GCCINCDIR)
-LIBC_LIB       = -luc_c
-
-#############################################################################
-#
-# X86 (IA32)
-#
-
-#
-# x86_tiny - minimal environment (only l4util, no log, no names)
-#
-BID_SUPPORTED_x86_tiny          = y
-LIBCINCDIR_x86_tiny             = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_tiny             =
-LIBCLIBS_x86_tiny               = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c                                    \
-                                  -luc_be_minimal_io                        \
-                                  -luc_be_l4_start_stop                     \
-                                  $(MMAP_BACKEND)                           \
-                                  -luc_c -luclibc_support -ll4util -lsigma0 \
-                                  -luc_c $(GCCLIB) -luc_c -ll4sys
-L4LIBS_x86_tiny                 = -static -lmain -ll4util -ll4sys
-CRT0_x86_tiny                   = $(CRT0_DEFAULT)
-CRTN_x86_tiny                   =
-LDSCRIPT_x86_tiny               = $(LDS_DEFAULT)
-
-
-#
-# x86_sigma0 - minimal environment (util, names, log)
-#
-BID_SUPPORTED_x86_sigma0        = y
-LIBCINCDIR_x86_sigma0           = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_sigma0           =
-LIBCLIBS_x86_sigma0             = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c                                    \
-                                  -luc_be_minimal_io                        \
-                                  -luc_be_l4_start_stop                     \
-                                  $(MMAP_BACKEND)                           \
-                                  -luc_c -luclibc_support                   \
-                                  -llogserver -lnames -lsigma0              \
-                                  -ll4util_root -ll4util $(ROOTLIB)         \
-                                  -luc_c $(GCCLIB) -luc_c -ll4sys
-L4LIBS_x86_sigma0               = -static -lmain -lnames                    \
-                                  -llogserver -ll4util_root -ll4util -ll4sys
-CRT0_x86_sigma0                 = $(CRT0_DEFAULT)
-CRTN_x86_sigma0                 =
-LDSCRIPT_x86_sigma0             = $(LDS_DEFAULT)
-
-#
-# all_libc - compiles C libs
-#
-BID_SUPPORTED_all_libc          = y
-LIBCINCDIR_all_libc             = $(LIBC_INCLUDE)
-LIBCLIBDIR_all_libc             =
-LIBCLIBS_all_libc               = -nostdlib $(GCCLDNOSTDLIB) $(LIBC_LIB)    \
-                                  $(LIBCBACKEND_LIB) $(GCCLIB) $(LIBC_LIB)
-L4LIBS_all_libc                 =
-CRT0_all_libc                   = $(CRT0_DEFAULT)
-CRTN_all_libc                   =
-LDSCRIPT_all_libc               = $(LDS_DEFAULT)
-
-
-#
-# all_linux - compilation without anything, but unlike host mode still
-#             (potentially) cross compiled
-#
-BID_SUPPORTED_all_linux         = y
-LIBCINCDIR_all_linux            =
-LIBCLIBDIR_all_linux            =
-LIBCLIBS_all_linux              =
-L4LIBS_all_linux                =
-CRT0_all_linux                  =
-CRTN_all_linux                  =
-LDSCRIPT_all_linux              =
-
-
-#
-# all_host - compilation for the host system
-#
-BID_SUPPORTED_all_host          = y
-LIBCINCDIR_all_host             =
-LIBCLIBDIR_all_host             =
-LIBCLIBS_all_host               =
-L4LIBS_all_host                 =
-CRT0_all_host                   =
-CRTN_all_host                   =
-LDSCRIPT_all_host               =
-
-#
-# x86_l4linux - L4Env functions for L4Linux programs
-#
-BID_SUPPORTED_x86_l4linux       = y
-LIBCINCDIR_x86_l4linux          = $(I_GCCINCDIR)
-LIBCLIBDIR_x86_l4linux          = -L$(DROPS_STDDIR)/lib
-LIBCLIBS_x86_l4linux            = -ldm_generic -ldm_mem -lnames             \
-                                  $(ROOTLIB) -lloaderif -ll4env             \
-                                  -ll4env_err -lslab                        \
-                                  -llogserver_capsule -ll4util -ll4sys-l4x
-CRT0_x86_l4linux                =
-CRTN_x86_l4linux                =
-LDSCRIPT_x86_l4linux            =
-
-
-#
-# x86_l4linux_kern - build L4Linux kernel modules
-#
-BID_SUPPORTED_x86_l4linux_kern  = y
-LIBCINCDIR_x86_l4linux_kern     = -nostdinc -I$(L4LINUX22_DIR)/include      \
-                                  -D__KERNEL__ -DLINUX_ON_L4 $(I_GCCINCDIR)
-LIBCLIBDIR_x86_l4linux_kern     =
-LIBCLIBS_x86_l4linux_kern       =
-CRT0_x86_l4linux_kern           =
-CRTN_x86_l4linux_kern           =
-LDSCRIPT_x86_l4linux_kern       =
-
-
-#
-# x86_l4env -- l4env, the default
-#
-BID_SUPPORTED_x86_l4env         = y
-LIBCINCDIR_x86_l4env            = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_l4env            =
-L4LIBS_x86_l4env                = -static -lgeneric_ts -ll4env              \
-                                  -ll4rm -ldm_generic -ldm_mem -lthread     \
-                                  -lsemaphore -llogserver_capsule           \
-                                  -lnames -ll4util_root -ll4util -lsigma0   \
-                                  $(ROOTLIB) -ll4env -ll4env_err -ll4rm     \
-                                  -ldm_generic -ldm_mem -lthread -lslab     \
-                                  -ll4sys
-LIBCLIBS_x86_l4env              = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -luclibc_support                          \
-                                  $(MALLOC_BACKEND)                         \
-                                  -lc_be_mmap                               \
-                                  -lc_be_mmap_util                          \
-                                  -lc_be_l4env_start_stop                   \
-                                  -lc_be_minimal_log_io                     \
-                                  -luc_be_simple_sleep                      \
-                                  -ll4env -llogserver_capsule -ll4rm        \
-                                  -ldm_generic -ldm_mem -lthread            \
-                                  -lgeneric_ts $(UCLIBC_IMPLEMENTATION)     \
-                                  $(GCCLIB) $(UCLIBC_IMPLEMENTATION)        \
-                                  -ll4sys
-CRT0_x86_l4env                  = $(CRT0_DEFAULT)
-CRTN_x86_l4env                  =
-LDSCRIPT_x86_l4env              = $(LDS_DEFAULT)
-
-#
-# x86_l4env_minimal - uClibc with just write(1, ...) as io backend
-#
-BID_SUPPORTED_x86_l4env_minimal = y
-LIBCINCDIR_x86_l4env_minimal    = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_l4env_minimal    =
-LIBCLIBS_x86_l4env_minimal      = -nostdlib $(GCCLDNOSTDLIB)              \
-                                  $(MALLOC_BACKEND)                         \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -lgeneric_ts      \
-                                  -lc_be_minimal_log_io -lc_be_mmap_util    \
-                                  $(MALLOC_BACKEND) -lc_be_mmap             \
-                                  -lc_be_mmap_util                          \
-                                  -ll4rm -ldm_mem -ldm_generic -lthread     \
-                                  -lsemaphore -ll4env -ll4env_err -lslab    \
-                                  -llogserver_capsule -ll4rm -lthread       \
-                                  -ldm_generic -lnames                      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(UCLIBC_IMPLEMENTATION) $(GCCLIB)        \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -luclibc_support  \
-                                  -ll4sys
-L4LIBS_x86_l4env_minimal        = -static -ll4rm -ldm_mem                 \
-                                  -ldm_generic -lthread -lsemaphore -ll4env \
-                                  -ll4env_err -lslab -llogserver_capsule    \
-                                  -ll4rm -lthread -ldm_generic -lnames      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(ROOTLIB) -ll4sys
-CRT0_x86_l4env_minimal          = $(CRT0_DEFAULT)
-CRTN_x86_l4env_minimal          =
-LDSCRIPT_x86_l4env_minimal      = $(LDS_DEFAULT)
-
-#
-# x86_l4env_base - uclibc with backends:
-#     basic_io, io, basic_mmap, mmap_util, syslog, simple_sleep, time,
-#     file_table
-#
-BID_SUPPORTED_x86_l4env_base    = y
-LIBCINCDIR_x86_l4env_base       = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_l4env_base       =
-LIBCLIBS_x86_l4env_base         = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -u printf -lc_be_io.o $(MALLOC_BACKEND)   \
-                                  -lc_be_time -lrtc -ll4rm -ldm_mem         \
-                                  -ldm_generic -lthread -lsemaphore -ll4env \
-                                  -ll4env_err -lslab -llogserver_capsule    \
-                                  -ll4rm -lthread -ldm_generic -lnames      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  $(GCCLIB)                                 \
-                                  $(MALLOC_BACKEND) -ll4rm -ldm_mem         \
-                                  -ldm_generic -lc_be_time -lc_be_mmap      \
-                                  -lc_be_mmap_util -lc_be_l4env_start_stop  \
-                                  -lgeneric_ts                              \
-                                  -lc_be_syslog -lc_be_file-table           \
-                                  -luc_be_simple_sleep -ll4vfs_common_io    \
-                                  -ll4vfs_basic_io -ll4vfs_connection       \
-                                  -ll4vfs_basic_name_server                 \
-                                  -ll4vfs_name_server                       \
-                                  -ll4vfs_name_space_provider               \
-                                  -ll4vfs_extendable -ll4sys                \
-                                  $(UCLIBC_IMPLEMENTATION)
-L4LIBS_x86_l4env_base           = -static -ll4rm -ldm_mem -ldm_generic      \
-                                  -lthread -lsemaphore -ll4env -ll4env_err  \
-                                  -lslab -llogserver_capsule -ll4rm         \
-                                  -lthread -ldm_generic -lnames             \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(ROOTLIB) -ll4sys
-CRT0_x86_l4env_base             = $(CRT0_DEFAULT)
-CRTN_x86_l4env_base             =
-LDSCRIPT_x86_l4env_base         = $(LDS_DEFAULT)
-
-#
-# x86_loader - applications to be loaded by the L4Env loader.
-#              Will be merged with l4env_base and become the default mode.
-#
-BID_SUPPORTED_x86_loader      = y
-LIBCINCDIR_x86_loader         = $(LIBC_INCLUDE)
-LIBCLIBDIR_x86_loader         =
-LIBCLIBS_x86_loader           = -nostdlib $(GCCLDNOSTDLIB)                \
-                                -luc_c $(GCCLIB) -luc_c
-L4LIBS_x86_loader             = -lloader.s -ll4sys
-CRT0_x86_loader               = $(CRT0_DEFAULT)
-CRTN_x86_loader               =
-LDSCRIPT_x86_loader           = $(LDS_LOADER)
-
-
-#############################################################################
-#
-# ARM
-#
-
-#
-# arm_tiny
-#
-BID_SUPPORTED_arm_tiny          = y
-LIBCINCDIR_arm_tiny             = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_tiny             =
-LIBCLIBS_arm_tiny               = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -lmain -luc_c -luclibc_support            \
-                                  -luc_be_l4_start_stop                     \
-                                  -luc_be_minimal_io                        \
-                                  $(MMAP_BACKEND) -ll4util                  \
-                                  -lsigma0 $(GCCLIB) -luc_c
-L4LIBS_arm_tiny                 = -static -lmain -ll4util -ll4sys
-CRT0_arm_tiny                   = $(CRT0_DEFAULT)
-CRTN_arm_tiny                   =
-LDSCRIPT_arm_tiny               = $(LDS_DEFAULT)
-
-#
-# sigma0
-#
-BID_SUPPORTED_arm_sigma0        = y
-LIBCINCDIR_arm_sigma0           = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_sigma0           =
-LIBCLIBS_arm_sigma0             = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -lmain                                    \
-                                  -luc_c                                    \
-                                  -luclibc_support                          \
-                                  -luc_be_l4_start_stop                     \
-                                  -luc_be_minimal_io                        \
-                                  $(MMAP_BACKEND)                           \
-                                  -lsigma0 $(GCCLIB) -luc_c
-L4LIBS_arm_sigma0               = -static -lmain -llogserver -lnames        \
-                                  -ll4util_root -ll4util $(ROOTLIB) -ll4sys
-CRT0_arm_sigma0                 = $(CRT0_DEFAULT)
-CRTN_arm_sigma0                 =
-LDSCRIPT_arm_sigma0             = $(LDS_DEFAULT)
-
-#
-# arm_l4env_minimal
-#
-BID_SUPPORTED_arm_l4env_minimal = y
-LIBCINCDIR_arm_l4env_minimal    = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_l4env_minimal    =
-LIBCLIBS_arm_l4env_minimal      = -nostdlib $(GCCLDNOSTDLIB)              \
-                                  $(MALLOC_BACKEND)                         \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -lgeneric_ts      \
-                                  -lc_be_minimal_log_io -lc_be_mmap_util    \
-                                  $(MALLOC_BACKEND) -lc_be_mmap             \
-                                  -lc_be_mmap_util                          \
-                                  -ll4rm -ldm_mem -ldm_generic -lthread     \
-                                  -lsemaphore -ll4env -ll4env_err -lslab    \
-                                  -llogserver_capsule -ll4rm -lthread       \
-                                  -ldm_generic -lnames                      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(UCLIBC_IMPLEMENTATION) $(GCCLIB)        \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -luclibc_support  \
-                                  -ll4sys
-L4LIBS_arm_l4env_minimal        = -static -ll4rm -ldm_mem                 \
-                                  -ldm_generic -lthread -lsemaphore -ll4env \
-                                  -ll4env_err -lslab -llogserver_capsule    \
-                                  -ll4rm -lthread -ldm_generic -lnames      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(ROOTLIB) -ll4sys
-CRT0_arm_l4env_minimal          = $(CRT0_DEFAULT)
-CRTN_arm_l4env_minimal          =
-LDSCRIPT_arm_l4env_minimal      = $(LDS_DEFAULT)
-
-#
-# arm_l4env -- default mode
-#
-BID_SUPPORTED_arm_l4env         = y
-LIBCINCDIR_arm_l4env            = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_l4env            =
-L4LIBS_arm_l4env                = -static -lgeneric_ts -ll4env              \
-                                  -ll4rm -ldm_generic -ldm_mem -lthread     \
-                                  -lsemaphore -llogserver_capsule -lnames   \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(ROOTLIB) -ll4env -ll4env_err            \
-                                  -ll4rm -ldm_generic -ldm_mem -lthread     \
-                                  -lslab -ll4sys
-LIBCLIBS_arm_l4env              = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c -luclibc_support                   \
-                                  $(MALLOC_BACKEND)                         \
-                                  -lc_be_mmap -lc_be_mmap_util              \
-                                  -luc_be_l4_start_stop                     \
-                                  -lc_be_minimal_log_io                     \
-                                  -ll4env -llogserver_capsule -ll4rm        \
-                                  -ldm_generic -ldm_mem -lthread            \
-                                  -luc_c $(GCCLIB) -luc_c
-CRT0_arm_l4env                  = $(CRT0_DEFAULT)
-CRTN_arm_l4env                  =
-LDSCRIPT_arm_l4env              = $(LDS_DEFAULT)
-
-BID_SUPPORTED_arm_l4env_base = y
-LIBCINCDIR_arm_l4env_base    = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_l4env_base    =
-LIBCLIBS_arm_l4env_base      = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -u printf -lc_be_io.o $(MALLOC_BACKEND)   \
-                                  -lc_be_time -lrtc -ll4rm -ldm_mem         \
-                                  -ldm_generic -lthread -lsemaphore -ll4env \
-                                  -ll4env_err -lslab -llogserver_capsule    \
-                                  -ll4rm -lthread -ldm_generic -lnames      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  $(GCCLIB)                                 \
-                                  $(MALLOC_BACKEND) -ll4rm -ldm_mem         \
-                                  -ldm_generic -lc_be_time -lc_be_mmap      \
-                                  -lc_be_mmap_util -lc_be_l4env_start_stop  \
-                                  -lgeneric_ts                              \
-                                  -lc_be_syslog -lc_be_file-table           \
-                                  -luc_be_simple_sleep -ll4vfs_common_io    \
-                                  -ll4vfs_basic_io -ll4vfs_connection       \
-                                  -ll4vfs_basic_name_server                 \
-                                  -ll4vfs_name_server                       \
-                                  -ll4vfs_name_space_provider               \
-                                  -ll4vfs_extendable -ll4sys                \
-                                  $(UCLIBC_IMPLEMENTATION)
-L4LIBS_arm_l4env_base           = -static -ll4rm -ldm_mem -ldm_generic      \
-                                  -lthread -lsemaphore -ll4env -ll4env_err  \
-                                  -lslab -llogserver_capsule -ll4rm         \
-                                  -lthread -ldm_generic -lnames             \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(ROOTLIB) -ll4sys
-CRT0_arm_l4env_base          = $(CRT0_DEFAULT)
-CRTN_arm_l4env_base          =
-LDSCRIPT_arm_l4env_base      = $(LDS_DEFAULT)
-
-#
-# arm_loader - applications to be loaded by the L4Env loader.
-#
-BID_SUPPORTED_arm_loader        = y
-LIBCINCDIR_arm_loader           = $(LIBC_INCLUDE)
-LIBCLIBDIR_arm_loader           =
-LIBCLIBS_arm_loader             = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c $(GCCLIB) -luc_c
-L4LIBS_arm_loader               = -lloader.s -ll4sys
-CRT0_arm_loader                 = $(CRT0_DEFAULT)
-CRTN_arm_loader                 =
-LDSCRIPT_arm_loader             = $(LDS_LOADER)
-
-#
-# arm_l4linux - L4Env functions for L4Linux programs
-#
-BID_SUPPORTED_arm_l4linux       = y
-LIBCINCDIR_arm_l4linux          = $(I_GCCINCDIR)
-LIBCLIBDIR_arm_l4linux          = -L$(DROPS_STDDIR)/lib
-LIBCLIBS_arm_l4linux            = -ldm_generic -ldm_mem -lnames             \
-                                  $(ROOTLIB) -lloaderif -ll4env             \
-                                  -ll4env_err -lslab                        \
-                                  -llogserver_capsule -ll4util -ll4sys-l4x
-CRT0_arm_l4linux                =
-CRTN_arm_l4linux                =
-LDSCRIPT_arm_l4linux            =
-
-
-#############################################################################
-#
-# AMD64 
-#
-
-#
-# amd64_tiny (without names and logserver)
-#
-BID_SUPPORTED_amd64_tiny        = y
-LIBCINCDIR_amd64_tiny           = $(LIBC_INCLUDE)
-LIBCLIBDIR_amd64_tiny           =
-LIBCLIBS_amd64_tiny             = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c                                    \
-                                  -luc_be_minimal_io                        \
-                                  -luc_be_l4_start_stop                     \
-                                  $(MMAP_BACKEND)                           \
-                                  -luc_c -luclibc_support -ll4util -lsigma0 \
-                                  -luc_c $(GCCLIB) -luc_c -ll4sys
-L4LIBS_amd64_tiny               = -static -lmain -ll4util -ll4sys
-CRT0_amd64_tiny                 = $(CRT0_DEFAULT)
-CRTN_amd64_tiny                 =
-LDSCRIPT_amd64_tiny             = $(LDS_DEFAULT)
-
-#
-# amd64_sigma0 - sigma0 mode
-#
-BID_SUPPORTED_amd64_sigma0      = y
-LIBCINCDIR_amd64_sigma0         = $(LIBC_INCLUDE)
-LIBCLIBDIR_amd64_sigma0         =
-LIBCLIBS_amd64_sigma0           = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  -luc_c                                    \
-                                  -luc_be_minimal_io                        \
-                                  -luc_be_l4_start_stop                     \
-                                  $(MMAP_BACKEND)                           \
-                                  -luc_c -luclibc_support                   \
-                                  -llogserver -lnames -lsigma0              \
-                                  -ll4util_root -ll4util $(ROOTLIB)         \
-                                  -luc_c $(GCCLIB) -luc_c -ll4sys
-L4LIBS_amd64_sigma0             = -static -lmain -lnames                    \
-                                  -llogserver -ll4util_root -ll4util -ll4sys
-CRT0_amd64_sigma0               = $(CRT0_DEFAULT)
-CRTN_amd64_sigma0               =
-LDSCRIPT_amd64_sigma0           = $(LDS_DEFAULT)
-
-#
-# amd64_l4env - l4env, the default
-#
-BID_SUPPORTED_amd64_l4env       = y
-LIBCINCDIR_amd64_l4env            = $(LIBC_INCLUDE)
-LIBCLIBDIR_amd64_l4env            =
-L4LIBS_amd64_l4env              = -static -lgeneric_ts -ll4env              \
-                                  -ll4rm -ldm_generic -ldm_mem -lthread     \
-                                  -lsemaphore -llogserver_capsule           \
-                                  -lnames -ll4util_root -ll4util $(ROOTLIB) \
-                                  -ll4env -ll4env_err -ll4rm -ldm_generic   \
-                                  -ldm_mem -lthread -lslab -ll4sys
-LIBCLIBS_amd64_l4env              = -nostdlib $(GCCLDNOSTDLIB)                \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -luclibc_support                          \
-                                  $(MALLOC_BACKEND)                         \
-                                  -lc_be_mmap                               \
-                                  -lc_be_mmap_util                          \
-                                  -lc_be_l4env_start_stop                   \
-                                  -lc_be_minimal_log_io                     \
-                                  -luc_be_simple_sleep                      \
-                                  -ll4env -llogserver_capsule -ll4rm        \
-                                  -ldm_generic -ldm_mem -lthread            \
-                                  -lgeneric_ts -lsigma0                     \
-				  $(UCLIBC_IMPLEMENTATION)     \
-                                  $(GCCLIB) $(UCLIBC_IMPLEMENTATION)        \
-                                  -ll4sys
-CRT0_amd64_l4env                  = $(CRT0_DEFAULT)
-CRTN_amd64_l4env                  =
-LDSCRIPT_amd64_l4env              = $(LDS_DEFAULT)
-
-BID_SUPPORTED_amd64_l4env_base = y
-LIBCINCDIR_amd64_l4env_base    = $(LIBC_INCLUDE)
-LIBCLIBDIR_amd64_l4env_base    =
-LIBCLIBS_amd64_l4env_base      = -nostdlib $(GCCLDNOSTDLIB)                \
-                               -u printf -lc_be_io.o $(MALLOC_BACKEND)   \
-                               -lc_be_time -lrtc -ll4rm -ldm_mem         \
-                               -ldm_generic -lthread -lsemaphore -ll4env \
-                               -ll4env_err -lslab -llogserver_capsule    \
-                               -ll4rm -lthread -ldm_generic -lnames      \
-                               -ll4util_root -ll4util -lsigma0           \
-                               $(UCLIBC_IMPLEMENTATION)                  \
-                               $(GCCLIB)                                 \
-                               $(MALLOC_BACKEND) -ll4rm -ldm_mem         \
-                               -ldm_generic -lc_be_time -lc_be_mmap      \
-                               -lc_be_mmap_util -lc_be_l4env_start_stop  \
-                               -lgeneric_ts                              \
-                               -lc_be_syslog -lc_be_file-table           \
-                               -luc_be_simple_sleep -ll4vfs_common_io    \
-                               -ll4vfs_basic_io -ll4vfs_connection       \
-                               -ll4vfs_basic_name_server                 \
-                               -ll4vfs_name_server                       \
-                               -ll4vfs_name_space_provider               \
-                               -ll4vfs_extendable -ll4sys                \
-                               $(UCLIBC_IMPLEMENTATION)
-L4LIBS_amd64_l4env_base        = -static -ll4rm -ldm_mem -ldm_generic    \
-                               -lthread -lsemaphore -ll4env -ll4env_err  \
-                               -lslab -llogserver_capsule -ll4rm         \
-                               -lthread -ldm_generic -lnames             \
-                               -ll4util_root -ll4util -lsigma0           \
-                               $(ROOTLIB) -ll4sys
-CRT0_amd64_l4env_base         = $(CRT0_DEFAULT)
-CRTN_amd64_l4env_base         =
-LDSCRIPT_amd64_l4env_base     = $(LDS_DEFAULT)
-
-#
-# amd64_l4env_minimal - libc with just write(1, ...) as io backend
-#
-BID_SUPPORTED_amd64_l4env_minimal = y
-LIBCINCDIR_amd64_l4env_minimal  = $(LIBC_INCLUDE)
-LIBCLIBDIR_amd64_l4env_minimal  =
-LIBCLIBS_amd64_l4env_minimal    = -nostdlib $(GCCLDNOSTDLIB)            \
-                                  $(MALLOC_BACKEND)                         \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -lgeneric_ts      \
-                                  -lc_be_minimal_log_io -lc_be_mmap_util    \
-                                  $(MALLOC_BACKEND) -lc_be_mmap             \
-                                  -lc_be_mmap_util                          \
-                                  -ll4rm -ldm_mem -ldm_generic -lthread     \
-                                  -lsemaphore -ll4env -ll4env_err -lslab    \
-                                  -llogserver_capsule -ll4rm -lthread       \
-                                  -ldm_generic -lnames                      \
-                                  -ll4util_root -ll4util -lsigma0           \
-                                  $(UCLIBC_IMPLEMENTATION) $(GCCLIB)        \
-                                  $(UCLIBC_IMPLEMENTATION)                  \
-                                  -lc_be_l4env_start_stop -ll4sys
-L4LIBS_amd64_l4env_minimal      = -static -ll4rm -ldm_mem               \
-                                  -ldm_generic -lthread -lsemaphore -ll4env \
-                                  -ll4env_err -lslab -llogserver_capsule    \
-                                  -ll4rm -lthread -ldm_generic -lnames      \
-                                  -ll4util_root -ll4util $(ROOTLIB) -ll4sys
-CRT0_amd64_l4env_minimal        = $(CRT0_DEFAULT)
-CRTN_amd64_l4env_minimal        =
-LDSCRIPT_amd64_l4env_minimal    = $(LDS_DEFAULT)
-
-.general.d:        $(L4DIR_ABS)/mk/modes.inc
diff --git a/libdde-linux26/libdde_linux26/mk/prog.mk b/libdde-linux26/libdde_linux26/mk/prog.mk
deleted file mode 100644
index c1d5d9a8..00000000
--- a/libdde-linux26/libdde_linux26/mk/prog.mk
+++ /dev/null
@@ -1,165 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for binary directories
-#
-# $Id: prog.mk 397 2008-08-22 02:50:28Z l4check $
-#
-# $Author: l4check $
-#
-# Makeconf is used, see there for further documentation
-# install.inc is used, see there for further documentation
-# binary.inc is used, see there for further documentation
-
-ifeq ($(origin _L4DIR_MK_PROG_MK),undefined)
-_L4DIR_MK_PROG_MK=y
-
-ROLE = prog.mk
-
-include $(L4DIR)/mk/Makeconf
-$(GENERAL_D_LOC): $(L4DIR)/mk/prog.mk
-
-# define INSTALLDIRs prior to including install.inc, where the install-
-# rules are defined.
-ifeq ($(MODE),host)
-INSTALLDIR_BIN		?= $(DROPS_STDDIR)/bin/host
-INSTALLDIR_BIN_LOCAL	?= $(OBJ_BASE)/bin/host
-else
-INSTALLDIR_BIN		?= $(DROPS_STDDIR)/bin/$(subst -,/,$(SYSTEM))
-INSTALLDIR_BIN_LOCAL	?= $(OBJ_BASE)/bin/$(subst -,/,$(SYSTEM))
-endif
-ifeq ($(BID_STRIP_PROGS),y)
-INSTALLFILE_BIN 	?= $(STRIP) --strip-unneeded $(1) -o $(2) && \
-			   chmod 755 $(2)
-INSTALLFILE_BIN_LOCAL 	?= $(STRIP) --strip-unneeded $(1) -o $(2) && \
-			   chmod 755 $(2)
-else
-INSTALLFILE_BIN 	?= $(INSTALL) -m 755 $(1) $(2)
-INSTALLFILE_BIN_LOCAL 	?= $(INSTALL) -m 755 $(1) $(2)
-endif
-
-INSTALLFILE		= $(INSTALLFILE_BIN)
-INSTALLDIR		= $(INSTALLDIR_BIN)
-INSTALLFILE_LOCAL	= $(INSTALLFILE_BIN_LOCAL)
-INSTALLDIR_LOCAL	= $(INSTALLDIR_BIN_LOCAL)
-
-# our mode
-MODE 			?= l4env
-
-# include all Makeconf.locals, define common rules/variables
-include $(L4DIR)/mk/binary.inc
-
-ifneq ($(SYSTEM),) # if we have a system, really build
-
-TARGET_STANDARD := $(TARGET) $(TARGET_$(OSYSTEM))
-TARGET_PROFILE := $(addsuffix .pr,$(filter $(BUILD_PROFILE),$(TARGET)))
-TARGET	+= $(TARGET_$(OSYSTEM)) $(TARGET_PROFILE)
-
-# define some variables different for lib.mk and prog.mk
-ifeq ($(MODE),loader)
-LDFLAGS += --dynamic-linker libld-l4.s.so
-endif
-ifeq ($(BID_GENERATE_MAPFILE),y)
-LDFLAGS += -Map $(strip $@).map
-endif
-LDFLAGS += $(addprefix -L, $(PRIVATE_LIBDIR) $(PRIVATE_LIBDIR_$(OSYSTEM)) $(PRIVATE_LIBDIR_$@) $(PRIVATE_LIBDIR_$@_$(OSYSTEM)))
-LDFLAGS += $(addprefix -L, $(L4LIBDIR)) $(LIBCLIBDIR)
-LDFLAGS += -L$(DDE26LIBDIR)
-LDFLAGS += -L$(DDEKITLIBDIR)
-LDFLAGS	+= $(LIBS) #$(addprefix -T, $(LDSCRIPT)) $(L4LIBS) $(LIBCLIBS) $(LDFLAGS_$@)
-# Not all host linkers understand this option
-ifneq ($(HOST_LINK),1)
-LDFLAGS += -Wl,--warn-common
-endif
-
-#ifeq ($(notdir $(LDSCRIPT)),main_stat.ld)
-# ld denies -gc-section when linking against shared libraries
-#ifeq ($(findstring FOO,$(patsubst -l%.s,FOO,$(LIBS) $(L4LIBS) $(LIBCLIBS))),)
-LDFLAGS += -Wl,-gc-sections
-#endif
-#endif
-LDFLAGS += -Wl,-Tdefault.ld
-
-#include $(L4DIR)/mk/install.inc
-
-#VPATHEX = $(foreach obj, $(OBJS), $(firstword $(foreach dir, \
-#          . $(VPATH),$(wildcard $(dir)/$(obj)))))
-
-# target-rule:
-
-# Make looks for obj-files using VPATH only when looking for dependencies
-# and applying implicit rules. Though make adapts its automatic variables,
-# we cannot use them: The dependencies contain files which have not to be
-# linked to the binary. Therefore the foreach searches the obj-files like
-# make does, using the VPATH variable.
-# Use a surrounding strip call to avoid ugly linebreaks in the commands
-# output.
-
-# Dependencies: When we have ld.so, we use MAKEDEP to build our
-# library dependencies. If not, we fall back to LIBDEPS, an
-# approximation of the correct dependencies for the binary. Note, that
-# MAKEDEP will be empty if we dont have ld.so, LIBDEPS will be empty
-# if we have ld.so.
-
-ifeq ($(HAVE_LDSO),)
-LIBDEPS = $(foreach file, \
-                    $(patsubst -l%,lib%.a,$(filter-out -L%,$(LDFLAGS))) \
-                    $(patsubst -l%,lib%.so,$(filter-out -L%,$(LDFLAGS))),\
-                    $(word 1, $(foreach dir, \
-                           $(patsubst -L%,%,\
-                           $(filter -L%,$(LDFLAGS) $(L4ALL_LIBDIR))),\
-                      $(wildcard $(dir)/$(file)))))
-endif
-
-DEPS	+= $(foreach file,$(TARGET), $(dir $(file)).$(notdir $(file)).d)
-
-LINK_PROGRAM-C-host-1   := $(CC)
-LINK_PROGRAM-CXX-host-1 := $(CXX)
-
-LINK_PROGRAM  := $(LINK_PROGRAM-C-host-$(HOST_LINK))
-ifneq ($(SRC_CC),)
-LINK_PROGRAM  := $(LINK_PROGRAM-CXX-host-$(HOST_LINK))
-endif
-
-ifeq ($(LINK_PROGRAM),)
-#LINK_PROGRAM  := $(LD) -m $(LD_EMULATION)
-LINK_PROGRAM  := gcc
-endif
-
-$(TARGET): $(OBJS) $(LIBDEPS) 
-	@$(LINK_MESSAGE)
-	$(VERBOSE)$(call MAKEDEP,$(INT_LD_NAME),,,ld) $(LINK_PROGRAM) -o $@ $(OBJS) $(LDFLAGS) $(CRTN)
-	@$(BUILT_MESSAGE)
-#	$(VERBOSE)$(call MAKEDEP,$(INT_LD_NAME),,,ld) $(LINK_PROGRAM) -o $@ $(CRT0) $(OBJS) $(LDFLAGS) $(CRTN)
-
-endif	# architecture is defined, really build
-
--include $(DEPSVAR)
-.PHONY: all clean cleanall config help install oldconfig txtconfig
-help::
-	@echo "  all            - compile and install the binaries"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR_LOCAL)"
-endif
-	@echo "  install        - compile and install the binaries"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR)"
-endif
-	@echo "  relink         - relink and install the binaries"
-ifneq ($(SYSTEM),)
-	@echo "                   to $(INSTALLDIR_LOCAL)"
-endif
-	@echo "  disasm         - disassemble first target"
-	@echo "  scrub          - delete backup and temporary files"
-	@echo "  clean          - delete generated object files"
-	@echo "  cleanall       - delete all generated, backup and temporary files"
-	@echo "  help           - this help"
-	@echo
-ifneq ($(SYSTEM),)
-	@echo "  binaries are: $(TARGET)"
-else
-	@echo "  build for architectures: $(TARGET_SYSTEMS)"
-endif
-
-endif	# _L4DIR_MK_PROG_MK undefined
diff --git a/libdde-linux26/libdde_linux26/mk/ptest b/libdde-linux26/libdde_linux26/mk/ptest
deleted file mode 100755
index e85d53b6..00000000
--- a/libdde-linux26/libdde_linux26/mk/ptest
+++ /dev/null
@@ -1,444 +0,0 @@
-#! /usr/bin/perl -W
-#
-# Run package tests using Fiasco-UX
-#
-#
-#  Adam Lackorzynski <adam@os.inf.tu-dresden.de>
-#  Ronald Aigner <ra3@os.inf.tu-dresden.de>
-#
-# This script is derived from the autocheck script which can be found in
-# kernel/fiasco/tools. It has been slightly modified to suit the demands of
-# the package tests.
-#
-
-# make it pass for now
-#exit 0;
-
-use strict;
-use Getopt::Long;
-
-my $FIASCOUX;
-my $FIASCOUX_PARAM;
-my $L4DIR;
-my $OBJ_BASE;
-my $OBJDIR = 'OBJ-x86_586-l4v2';
-my $EXPECTED_OUT = 'expected.txt';
-my $TMP_OUT = 'tmp_out.txt';
-my $PKGNAME;
-my $COMPARE_CMD = 'diff -u $EXPECTED_OUT $TMP_OUT';
-
-my $ALARM_TIMEOUT = 60; # in seconds
-
-my %templs = (
-  roottask => '%s/pkg/roottask/server/src/%s/roottask',
-  sigma0   => '%s/pkg/sigma0/server/src/%s/sigma0',
-);
-
-my $Verbose  = 0;
-my $Quiet    = 0;
-my $Generate = 0;
-my $Memory   = 32;
-my $Plainrun = 0;
-my $No_fb    = 0;
-my $Use_Symbols = 0;
-my $Use_Lines = 0;
-
-my %progs;
-my %results;
-my %output;
-my @Baseservers;
-my $Client;
-my $Server;
-my $Fiasco_Dir;
-
-# filehandle for fiasco output
-my $Input;
-my $Output;
-
-my $Exit_code = 0;
-my $pid = 0;
-
-my $FILTER_LEVEL_FIASCO = 0;
-my $FILTER_LEVEL_ROOTTASK = 1;
-my $FILTER_LEVEL_USER = 2;
-my $Filter_state = $FILTER_LEVEL_FIASCO;
-my $Filter_level = $FILTER_LEVEL_USER;
-
-sub usage() {
-  print <<EOU;
-$0 [options] -c <client> -s <server>
-
- --l4dir, -l path         Path to an L4 directory
- --fiascoux, -f file      Path to the Fiasco-UX binary
- --fiascoux_param, -p params Parameters for Fiasco-UX
- --memory, -m megabyte    Number of Megabytes used by Fiasco. (default: 32)
- --objdir, -O objdir      Object dir, currently: $OBJDIR
- --verbose, -v            Be verbose (e.g. show output of L4 apps)
- --quiet, -q              Tell nothing, just set the exit code
- --generate               Generate the output file instead of comparing to it
- --server, -s file        The server to be tested
- --client, -c file        The file to run as test-application
- --base, -b file          Additional base servers required by the application
-                          Can be a comma seperated list. (Only specify the
-			  binary names!) (default: log, names, dm_phys)
- --timeout, -t timeout    Time in seconds to wait before shooting down a 
-                          runaway fiasco. (default: 60)
- --expectfail		  Expect failure. Return 0 on failure, 1 on success.
-
- Environment variables:
-  L4DIR                   Path to an L4 directory
-  OBJ_BASE		  Path to build directory
-  FIASCOUX                Path to the Fiasco-UX binary
-  EXPECTED_OUT            Filename of the file containing the expected output
-  TMP_OUT                 Filename of the tempfile containing Fiasco's output
-  COMPARE_CMD		  Command to compare output and expected output
-
- Notes:
-  Environment variables override options!
-EOU
-}
-
-##
-# Check if L4DIR looks like an L4 directory
-sub check_for_l4dir() {
-  unless (-d "$L4DIR/pkg/l4sys/include" ||
-          -d "$L4DIR/../kernel/fiasco/src/kern/ux") {
-    die "$L4DIR doesn't look like an L4 directory!";
-  }
-}
-
-##
-# Just check if the supplied binary in $FIASCOUX is really
-# a Fiasco UX version. Native versions will just segfault.
-sub check_for_fiasco_ux() {
-
-  unless ((-x $FIASCOUX && -f $FIASCOUX) ||
-          (-l $FIASCOUX && -x readlink $FIASCOUX && -f readlink $FIASCOUX)) {
-    die "$FIASCOUX: Does not exist or isn't an executable file";
-  }
-  
-  system("$FIASCOUX -h >/dev/null 2>&1");
-  die "$FIASCOUX doesn't seem to be a UX version." if $?;
-
-  $FIASCOUX =~ /(.*)\/([^\/]*)$/;
-  $Fiasco_Dir = $1;
-}
-
-# check for user app in binary path of L4
-sub check_user_app($)
-{
-  my $app_with_args = shift;
-
-  # extract arch and api from OBJ-dir
-  $OBJDIR =~ /OBJ-([^-]*)-(.*)/;
-  my $arch = $1;
-  my $api = $2;
-
-  my @check = split(/\s+/, $app_with_args);
-  my $app = shift @check;
-
-  my $p = sprintf "%s/bin/%s/%s/%s", $OBJ_BASE, $arch, $api, $app;
-  die "There's no $p!" unless -f $p;
-
-  return $p.'\\ '.join('\\ ', @check) if @check;
-  $p;
-}
-
-##
-# Check for userland (roottask, sigma0, ...)
-sub check_for_userland() {
-  foreach my $t (keys %templs) {
-    my $p = sprintf $templs{$t}, $OBJ_BASE, $OBJDIR;
-    die "There's no $p!" unless -f $p;
-    $progs{$t} = $p;
-  }
-
-  # check for base-servers
-  my @servers = @Baseservers;
-  @Baseservers = {};
-  if (scalar(@servers) eq 0) {
-    @servers = ( "log", "names", "dm_phys" );
-  }
-  
-  # iterate over servers and test if they exist in the bin dir
-  foreach my $s (@servers) {
-    push @Baseservers, check_user_app($s);
-  }
-
-  # test client and server
-  push @Baseservers, check_user_app($Client) if defined($Client);
-  push @Baseservers, check_user_app($Server);
-}
-
-##
-# Does the comparison of the output
-sub run_diff {
-  print STDERR "Running compare command \"$COMPARE_CMD\".\n" if $Verbose;
-  open(TMP, "$COMPARE_CMD |") or die "Cannot run diff: $!";
-  my @diff = <TMP>;
-  close TMP;
-  
-  # reset console in interactive mode
-  system "if tty -s; then stty echo icrnl icanon; fi";
-  
-  # check if there are differences between expected and generated output
-  if (@diff == 0) {
-    print STDERR "Output of test in $PKGNAME ok.\n";
-    return $Exit_code;
-  }
-
-  print STDERR "Test in $PKGNAME generated unexpected output:\n";
-  @diff = splice @diff, 1000 if @diff > 1000;
-  print STDERR @diff, "\n";
-  return 1 - $Exit_code;
-}
-
-##
-# Called if second alarm signal received
-#
-# Now all the output of Fiasco-UX should be through and we can savely kill
-# Fiasco-UX. We then check the generated output and terminate ourselves.
-sub got_sig_alarm_second {
-  print STDERR "Timeout for flushing Fiasco-UX output\n" if $Verbose;
-  print STDERR "Sending SIGKILL to $pid and diff output\n" if $Verbose;
-
-  kill KILL => $pid;
-  alarm 0;
-
-  # some sanity checks
-  if ( $Filter_state < $FILTER_LEVEL_USER ) {
-    print $Output "\n";
-    print $Output "User tasks did not start. Maybe overlapping modules?\n";
-    print $Output "Run \"" . fiascoux_cmdline() . "\" manually to check.\n";
-  }
-  close $Output;
-
-  # in generate mode, simply return
-  if ($Generate) {
-    system "stty echo";
-    exit 0;
-  }
-  
-  exit run_diff();
-}
-
-##
-# Called if first alarm signal received
-#
-# To flush Fiasco Output we send it a SIGINT (^C). Then we set up a second
-# timeout and return, so the filter can process the output which we forced to
-# be flushed.
-sub got_sig_alarm_first {
-  print STDERR "Timeout for Fiasco-UX hit!\n" if $Verbose;
-  print STDERR "Sending SIGINT to $pid\n" if $Verbose;
-  
-  kill INT => $pid;
-  $SIG{ALRM} = \&got_sig_alarm_second;
-  alarm 2; # time to flush output
-
-  # return to keep on filtering the output of Fiasco
-}
-
-##
-# Runs the timer and kills fiasco if runaway
-#
-# - sets the signal handler
-# - initializes the timeout
-sub set_alarm {
-  $SIG{ALRM} = \&got_sig_alarm_first;
-  alarm $ALARM_TIMEOUT;
-  print STDERR "Set alarm to $ALARM_TIMEOUT seconds\n" if $Verbose;
-}
-
-##
-# Build the fiasco command line
-#
-# Adds the binaries with the appropriate parameters.
-sub fiascoux_cmdline() {
-  (my $p = $FIASCOUX) =~ s/\/[^\/]+$//;
-  my $cmdline = "$FIASCOUX";
-  $cmdline .= " $FIASCOUX_PARAM" if defined $FIASCOUX_PARAM;
-  $cmdline .= " -symbols $Fiasco_Dir/Symbols" if $Use_Symbols;
-  $cmdline .= " -lines $Fiasco_Dir/Lines" if $Use_Lines;
-  $cmdline .= " -m $Memory";
-  $cmdline .= " -R $progs{roottask}"; # -quiet";
-  $cmdline .= "\"" if $Use_Symbols || $Use_Lines;
-  $cmdline .= " -symbols" if $Use_Symbols;
-  $cmdline .= " -lines" if $Use_Lines;
-  $cmdline .= "\"" if $Use_Symbols || $Use_Lines;
-  $cmdline .= " -S $progs{sigma0}"; # --quiet";
-  # when we change this to not cd into Fiasco dir, then
-  # prepend $p to $irq0
-  $cmdline .= " -I ".$p."/irq0";
-  if ($No_fb eq 1) {
-    $cmdline .= " -F /bin/true";
-  } else {
-    $cmdline .= " -F ".$p."/con_ux";
-  }
-  # add -l to base-servers, which already contains client and server
-  for my $s (@Baseservers) {
-    if (ref($s) ne "HASH") { # just checking for Hashes that smuggled in
-      $cmdline .= " -l ".$s;
-    }
-  }
-  $cmdline;
-}
-
-##
-# filters the output of fiasco
-#
-# We want to see everything once roottask are finished loading.
-# Therefore, we need some state machine to skip everything before and while
-# roottask is running.
-sub filter_fiasco_out
-{
-  $_ = shift;
-
-  # filter escape sequences
-  s/[[:cntrl:]]\[(\d;)?\d{0,2}m//g;
-  s/
//g;
-  s/[[:cntrl:]]\[K//g;
-  s/[[:cntrl:]]\[\d+;\d+[Hfr]//g;
-
-  # check if we have to change state
-  if (/^Roottask: Loading \d+ modules\./ &&
-      $Filter_state eq $FILTER_LEVEL_FIASCO) {
-    $Filter_state = $FILTER_LEVEL_ROOTTASK;
-    print STDERR "Changed state to Roottask-Output\n" if $Verbose;
-  }
-  if ( /^$/ && $Filter_state eq $FILTER_LEVEL_ROOTTASK) {
-    $Filter_state = $FILTER_LEVEL_USER;
-    print STDERR "Changed state to Userland-Output\n" if $Verbose;
-  }
-
-  # skip everything before and from roottask
-  return undef if $Filter_state < $Filter_level;
-
-  # if we are not supposed to filter anything, then return the line
-  return $_ if $Filter_level eq $FILTER_LEVEL_FIASCO;
-
-  # filter empty lines
-  return undef if /^$/;
-
-  # filter JDB warning and prompt
-  return undef if /^Terminal probably too small, should be at least/;
-  return undef if /^\([a-f0-9]\.\d\d\) jdb:/;
-  return undef if /^--.*ESP:.*EIP:.*/;
-
-  # filter memory dump
-  return undef if /^([a-f0-9]){8}:/;
-  
-  $_;
-}
-
-##
-# call_test
-sub run_fiasco {
-  my $cmdline = fiascoux_cmdline();
-  print "Calling: $cmdline\n" if $Verbose;
-
-  $pid = open($Input, "$cmdline|");
-  die "Can't start Fiasco: $!" unless defined $pid;
-  print "Run Fiasco-UX in $pid\n" if $Verbose;
-  
-  # if in generate mode, we redirect output to EXPECTED_OUT
-  # otherwise we redirect stdout to the TMP_OUT file
-  my $filename = $Generate ? $EXPECTED_OUT : $TMP_OUT;
-  open($Output, ">$filename") || die "Cannot open output file $filename";
-  my $oldfh = select($Output); $| = 1; select($oldfh);
-  print STDERR "Opened $filename, now setting timer\n" if $Verbose;
-
-  # the parent sets up the timer (it will eventually call the run_diff sub)
-  set_alarm();
-
-  my $o;
-  while (<$Input>) {
-    # we have to strip some lines
-    $o = filter_fiasco_out($_);
-    next unless defined $o;
-    print $Output $o;
-  }
-  print STDERR "Fiasco terminated.\n" if $Verbose;
-  close $Input;
-  close $Output;
-  # when we drop out of this loop fiasco terminated
-  alarm 0;
-
-  # in generate mode, simply return
-  exit 0 if $Generate;
-  
-  exit run_diff();
-}
-
-##
-# Plain run of Fiasco UX
-#
-# Not timer, no filter, simply run UX
-sub run_plain_fiasco {
-  my $cmdline = fiascoux_cmdline();
-  print "Running UX: \"$cmdline\"\n";
-  exec($cmdline) or die "Can't start Fiasco: $!";
-  exit 1;
-}
- 
-
-# -------------------------------------------------------------
-
-unless (GetOptions("help|h", sub { usage(); exit(0); },
-                   "l4dir|l=s", \$L4DIR,
-		   "builddir=s", \$OBJ_BASE,
-		   "fiascoux|f=s", \$FIASCOUX,
-		   "fiascoux_param|p=s", \$FIASCOUX_PARAM,
-		   "memory|m=s", \$Memory,
-		   "objdir|O=s", \$OBJDIR,
-		   "verbose|v!", \$Verbose,
-		   "quiet|q!", \$Quiet,
-		   "generate!", \$Generate,
-		   "expectfail!", \$Exit_code,
-		   "client|c=s", \$Client,
-		   "server|s=s", \$Server,
-		   "base|b=s", \@Baseservers,
-		   "timeout|t=s", \$ALARM_TIMEOUT,
-		   "plainrun!", \$Plainrun,
-		   "filterlevel=i", \$Filter_level,
-		   "nofb!", \$No_fb,
-		   "symbols!", \$Use_Symbols,
-		   "lines!", \$Use_Lines,
-		   )) {
-  usage();
-  exit(1);
-}
-
-@Baseservers = split(/,/,join(',',@Baseservers));
-
-$L4DIR = $ENV{L4DIR}       || die "Need an L4DIR set!" unless $L4DIR;
-$OBJ_BASE = $ENV{OBJ_BASE} || die "Need an builddir (OBJ_BASE) set!" unless $OBJ_BASE;
-$FIASCOUX = $ENV{FIASCOUX} || die "Need a Fiasco-UX path!" unless $FIASCOUX;
-if ($ENV{EXPECTED_OUT}) { $EXPECTED_OUT = $ENV{EXPECTED_OUT}; }
-die "Need filename of expected output!" unless $EXPECTED_OUT;
-if ($ENV{TMP_OUT}) { $TMP_OUT = $ENV{TMP_OUT}; }
-die "No valid temporary file set!" unless $TMP_OUT;
-$PKGNAME = $ENV{PKGNAME} || $Server 
-	|| die "No package-name set!" unless $PKGNAME;
-if ($ENV{COMPARE_CMD}) { $COMPARE_CMD = $ENV{COMPARE_CMD}; }
-die "No compare command set!" unless $COMPARE_CMD;
-
-check_for_l4dir();
-check_for_fiasco_ux();
-check_for_userland();
-
-##
-# The package test script:
-# This script forks off Fiasco and sets up a timeout. When the timeout
-# strikes, it sends a SIGINT to Fiasco to force a flush of the output buffer.
-# Then it sends a SIGKILL to terminate Fiasco.
-print "Main called by $$.\n" if $Verbose;
-
-# if plainrun, start run_plain_fiasco (it never returns)
-run_plain_fiasco() if $Plainrun;
-
-# this function forks off fiasco
-run_fiasco();
-
-# when we reach this point, something terribly went wrong
-die "Oops, error in script!\n";
diff --git a/libdde-linux26/libdde_linux26/mk/redo_defconfigs b/libdde-linux26/libdde_linux26/mk/redo_defconfigs
deleted file mode 100755
index e26644ad..00000000
--- a/libdde-linux26/libdde_linux26/mk/redo_defconfigs
+++ /dev/null
@@ -1,21 +0,0 @@
-#! /bin/sh
-
-set -x
-
-TMPDIR=$(mktemp -d)
-
-exithandler()
-{
-  rm -r $TMPDIR
-}
-
-trap exithandler EXIT
-
-cd ..
-
-for i in mk/defconfig/config.*; do
-  DROPSCONF_DEFCONFIG=$i make O=$TMPDIR oldconfig
-  diff -u $i $TMPDIR/.Makeconf.bid
-  grep -v '^DROPS_STDDIR=' $TMPDIR/.Makeconf.bid > $i
-  rm $TMPDIR/{.Makeconf.bid,.Makeconf.bid.converted,Makeconf.bid.local,Makeconf.bid.local.indep}
-done
diff --git a/libdde-linux26/libdde_linux26/mk/rel2abs.sh b/libdde-linux26/libdde_linux26/mk/rel2abs.sh
deleted file mode 100755
index 33dd8a5b..00000000
--- a/libdde-linux26/libdde_linux26/mk/rel2abs.sh
+++ /dev/null
@@ -1,72 +0,0 @@
-#! /bin/bash
-#
-# Convert relative path to absolute one
-#
-# Adam Lackorzynski <adam@os.inf.tu-dresden.de>
-#
-
-help()
-{
-  echo PWD=\$PWD $0 relpath1 [relpath2 [..]]
-  exit $1
-}
-
-convertpath()
-{
-  relpath=$1
-  basepath=$PWD
-  # sanity checks
-  [ -z "$relpath" -o -z "$basepath" ] && help 1
-  [ "${basepath#/}" = "${basepath}" ] && help 1
-  [ "${basepath/\/..\//}" = "${basepath}" ] || help 1
-  [ "${basepath/\/.\//}" = "${basepath}" ] || help 1
-  [ "${basepath/%\/../}" = "${basepath}" ] || help 1
-  [ "${basepath/%\/./}" = "${basepath}" ] || help 1
-
-
-  # remove slashes at the end
-  while [ "${relpath%/}" != "${relpath}" ];
-  do relpath="${relpath%/}"; done
-
-  # remove double/multi slashes
-  while [ "${relpath/\/\///}" != "${relpath}" ];
-  do relpath=${relpath/\/\///}; done
-
-  # is relpath relative?
-  if [ "${relpath#/}" != "${relpath}" ]; then
-    basepath=''
-    relpath=${relpath#/}
-  fi
-
-  relpath="$relpath/"
-
-  while [ -n "$relpath" ];
-  do
-    elem=${relpath%%/*}
-    relpath=${relpath#*/}
-
-    case $elem in
-      .) # skip
-	;;
-      ..)
-	 basepath=${basepath%/*}
-	;;
-      *)
-	 basepath=$basepath/$elem
-	;;
-    esac
-
-  done
-
-  [ -z "$basepath" ] && basepath=/$basepath
-
-  echo $basepath
-}
-
-while [ -n "$1" ];
-do
-  convertpath $1
-  shift
-done
-
-exit 0
diff --git a/libdde-linux26/libdde_linux26/mk/runux.mk b/libdde-linux26/libdde_linux26/mk/runux.mk
deleted file mode 100644
index c19a30ac..00000000
--- a/libdde-linux26/libdde_linux26/mk/runux.mk
+++ /dev/null
@@ -1,194 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template to run tests with Fiasco-UX
-#
-# install.inc is used, see there for further documentation
-
-ifeq ($(origin _L4DIR_MK_RUNUX_MK),undefined)
-_L4DIR_MK_RUNUX_MK=y
-
-ROLE = runux.mk
-.general.d:	$(L4DIR)/mk/runux.mk
-
-# set a mode, so binary.inc is satisfied
-MODE	?= l4env
-
-# include all Makeconf.locals, define common rules/variables
-include $(L4DIR)/mk/Makeconf
-include $(L4DIR)/mk/binary.inc
-
-# if we have a system set, build
-ifneq ($(SYSTEM),)
-
-##
-# !WARNING!
-#
-# This is a preliminary test to allow l4check to run Fiasco-UX tests for
-# multiple SYSTEMS. This currently only works for x86.
-ifneq ($(ARCH),x86)
-$(error "$(ROLE) currently does not support $(ARCH).")
-endif
-
-# now check if the current API has a FIASCOUX variable set and if so use it
-# XXX could be overloaded by $(OSYSTEM) == $(ARCH)-$(L4API) or $(SYSTEM)
-ifneq ($(FIASCOUX_$(L4API)),)
-FIASCOUX = $(FIASCOUX_$(L4API))
-else
-$(warning "Using generic(?) Fiasco UX "$(FIASCOUX)" to test $(L4API).")
-endif
-
-# the testapplication
-# test if variables are set
-ifeq ($(TEST_SERVER),)
-DO_TARGET	:= no_ptest
-else
-DO_TARGET	:= ptest
-endif
-# TEST_CLIENT might be empty. Testing server stand-alone
-ifneq ($(TEST_CLIENT),)
-TEST_CLIENT_PARAM = $(addprefix -c ,$(TEST_CLIENT))
-endif
-ifneq ($(BASE_SERVERS),)
-$(warning $(BASE_SERVERS))
-BASESERVERS     = $(foreach server, $(BASE_SERVERS), -b $(server) $(BASE_SERVERS_PARAM_$(server)))
-endif
-
-# expected output and what to do on mismatch
-EXPECTED_OUT	?= expected.txt
-TIMEOUT		?= 10
-DEBUG_PERL	?= 0
-TMP_OUT		?= tmp_out.txt
-
-# specify files to delete when doing 'make clean'
-DEL_ON_CLEAN	= $(TMP_OUT) core
-
-ifneq ($(DEBUG_PERL),0)
-DEBUG_PERL_	= -v
-else
-DEBUG_PERL_	=
-endif
-
-ifneq ($(MEMORY),)
-MEMORY_		= -m $(MEMORY)
-endif
-
-ifneq ($(FIASCOUX_PARAM),)
-FIASCOUX_PARAM_ = -p $(FIASCOUX_PARAM)
-endif
-
-# allow failure of test
-# 
-# If EXPECT_FAIL is set, the test if the output matches must fail, otherwise
-# ptest will return an error.
-ifeq ($(EXPECT_FAIL),1)
-EXPECT_FAIL_	= --expectfail
-else
-EXPECT_FAIL_	=
-endif
-
-# do keep ALL output
-#
-# if FILTER_KEEP_ALL is set, the Fiasco UX output is only filtered for escape
-# sequences. All other output is printed into temporary file
-ifeq ($(FILTER_KEEP_ALL),1)
-FILTER_KEEP_	= --filterlevel=0
-else
-FILTER_KEEP_	=
-endif
-
-# no framebuffer device
-#
-# If NO_FBUF_DEV is set, Fiasco UX will not open an X window to display
-# graphical output. This is useful for testing graphical applications.
-ifeq ($(NO_FBUF_DEV),1)
-NO_FBUF_DEV_	= --nofb
-else
-NO_FBUF_DEV_	=
-endif
-
-# enable symbols and lines per default
-USE_SYMBOLS	?= y
-USE_LINES	?= y
-
-ifeq ($(USE_SYMBOLS),y)
-USE_SYMBOLS_	= --symbols
-else
-USE_SYMBOLS_	=
-endif
-ifeq ($(USE_LINES),y)
-USE_LINES_	= --lines
-else
-USE_LINES_	=
-endif
-
-all:: $(DO_TARGET)
-
-# install.inc eventually defines rules for every target
-include $(L4DIR)/mk/install.inc
-
-no_ptest:
-	@echo "No test defined, skipping"
-
-ptest:: $(EXPECTED_OUT) $(BID_OBJ_Makefile).inc
-	$(VERBOSE)echo "Running Fiasco UX to test $(TEST_SERVER)"
-	$(VERBOSE)EXPECTED_OUT=$(EXPECTED_OUT) PKGNAME=$(PKGNAME) \
-		L4DIR=$(L4DIR) OBJ_BASE=$(OBJ_BASE) TMP_OUT=$(TMP_OUT) \
-		COMPARE_CMD=$(COMPARE_CMD) \
-		$(L4DIR)/mk/ptest -s $(TEST_SERVER) $(TEST_CLIENT_PARAM) \
-		-f $(FIASCOUX) $(FIASCOUX_PARAM_) -t $(TIMEOUT) \
-		-O OBJ-$(SYSTEM) \
-		$(BASESERVERS) $(DEBUG_PERL_) $(MEMORY_) $(EXPECT_FAIL_) \
-		$(FILTER_KEEP_) $(NO_FBUF_DEV_) $(USE_SYMBOLS_) $(USE_LINES_)
-
-genexp:: $(EXPECTED_OUT) $(BID_OBJ_Makefile).inc
-
-$(EXPECTED_OUT):
-	$(VERBOSE)echo "Running Fiasco UX to generate expected output"
-	$(VERBOSE)EXPECTED_OUT=$(EXPECTED_OUT) PKGNAME=$(PKGNAME) \
-		L4DIR=$(L4DIR) OBJ_BASE=$(OBJ_BASE) TMP_OUT=$(TMP_OUT) \
-		COMPARE=$(COMPARE_CMD) \
-		$(L4DIR)/mk/ptest -s $(TEST_SERVER) $(TEST_CLIENT_PARAM) \
-		-f $(FIASCOUX) $(FIASCOUX_PARAM_) -t $(TIMEOUT) \
-		-O OBJ-$(SYSTEM) \
-		$(BASESERVERS) $(DEBUG_PERL_) $(MEMORY_) $(EXPECT_FAIL_) \
-		$(FILTER_KEEP_) $(NO_FBUF_DEV_) $(USE_SYMBOLS_) $(USE_LINES_) \
-		--generate
-	$(VERBOSE)touch .expect-autogenerated
-
-plainrun:: $(BID_OBJ_Makefile).inc
-	$(VERBOSE)echo "Starting Fiasco UX"
-	$(VERBOSE)EXPECTED_OUT=$(EXPECTED_OUT) PKGNAME=$(PKGNAME) \
-		L4DIR=$(L4DIR) OBJ_BASE=$(OBJ_BASE) TMP_OUT=$(TMP_OUT) \
-		COMPARE_CMD=$(COMPARE_CMD) \
-		$(L4DIR)/mk/ptest -s $(TEST_SERVER) $(TEST_CLIENT_PARAM) \
-		-f $(FIASCOUX) $(FIASCOUX_PARAM_) -t $(TIMEOUT) \
-		-O OBJ-$(SYSTEM) \
-		$(BASESERVERS) $(DEBUG_PERL_) $(MEMORY_) $(FILTER_KEEP_) \
-		$(NO_FBUF_DEV_) $(USE_SYMBOLS_) $(USE_LINES_) --plainrun
-
-endif # system defined
-
-ptest genexp plainrun:: $(foreach arch,$(TARGET_SYSTEMS),\
-			$(OBJ_DIR)/OBJ-$(arch)/$(BID_OBJ_Makefile))
-	$(if $(TARGET_SYSTEMS),  $(VERBOSE)set -e ; \
-	    for d in $(TARGET_SYSTEMS) ; do \
-	    	PWD=$(OBJ_DIR)/OBJ-$$d $(MAKE) -C $(OBJ_DIR)/OBJ-$$d -f $(BID_OBJ_Makefile) \
-			$@ ; done )
-
-.PHONY: all ptest genexp plainrun clean cleanall help no_ptest
--include $(DEPSVAR)
-
-help::
-	@echo "Specify a target:"
-	@echo "all       - run test"
-	@echo "test      - run test"
-	@echo "genexp    - generate file with expected output"
-	@echo "plainrun  - just run binaries (no filter, no comparison)"
-	@echo "clean     - delete generated intermediate files"
-	@echo "cleanall  - delete all generated files (include genexp target)"
-	@echo "help      - this help"
-	@echo
-
-endif	# _L4DIR_MK_RUNUX_MK undefined
diff --git a/libdde-linux26/libdde_linux26/mk/subdir.mk b/libdde-linux26/libdde_linux26/mk/subdir.mk
deleted file mode 100644
index 176200fe..00000000
--- a/libdde-linux26/libdde_linux26/mk/subdir.mk
+++ /dev/null
@@ -1,64 +0,0 @@
-# -*- Makefile -*-
-#
-# DROPS (Dresden Realtime OPerating System) Component
-#
-# Makefile-Template for directories containing only subdirs
-#
-# 05/2002 Jork Loeser <jork.loeser@inf.tu-dresden.de>
-
-#include $(L4DIR)/mk/Makeconf
-
-TARGET ?= $(patsubst %/Makefile,%,$(wildcard $(addsuffix /Makefile, \
-	idl src lib server examples doc)))
-SUBDIR_TARGET	:= $(if $(filter doc,$(MAKECMDGOALS)),$(TARGET),    \
-			$(filter-out doc,$(TARGET)))
-
-all::	$(SUBDIR_TARGET) $(SUBDIRS)
-install::
-
-clean cleanall scrub::
-	$(VERBOSE)set -e; $(foreach d,$(TARGET), test -f $d/broken || \
-	    if [ -f $d/Makefile ] ; then PWD=$(PWD)/$d $(MAKE) -C $d $@ $(MKFLAGS) $(MKFLAGS_$(d)); fi; )
-
-install oldconfig txtconfig relink::
-	$(VERBOSE)set -e; $(foreach d,$(TARGET), test -f $d/broken -o -f $d/obsolete || \
-	    if [ -f $d/Makefile ] ; then PWD=$(PWD)/$d $(MAKE) -C $d $@ $(MKFLAGS) $(MKFLAGS_$(d)); fi; )
-
-# first the subdir-targets (this is were "all" will be build, e.g. in lib
-# or server.
-$(filter-out ptest,$(SUBDIR_TARGET)):
-	$(VERBOSE)test -f $@/broken -o -f $@/obsolete ||		\
-	    if [ -f $@/Makefile ] ; then PWD=$(PWD)/$@ $(MAKE) -C $@ $(MKFLAGS) ; fi
-# Second, the rules for going down into sub-pkgs with "lib" and "server"
-# targets. Going down into sub-pkgs.
-	$(if $(SUBDIRS),$(if $(filter $@,idl include lib server examples doc),\
-		$(VERBOSE)set -e; for s in $(SUBDIRS); do \
-			PWD=$(PWD)/$$s $(MAKE) -C $$s $@ $(MKFLAGS); done ))
-
-idl include lib server examples doc:
-
-# the test target is something special:
-TEST_DEPENDS ?= server
-
-# check if the test directory exists, check if its broken or obsolete
-# to be able to specify additional dependencies, we make it a :: target
-ptest:: $(TEST_DEPENDS) 
-	$(VERBOSE)test -f $@/broken -o -f $@/obsolete || \
-	  if [ -f $@/Makefile ] ; then PWD=$(PWD)/$@ $(MAKE) -C $@ $(MKFLAGS) ; fi
-
-install-symlinks:
-	$(warning target install-symlinks is obsolete. Use 'include' instead (warning only))
-	$(VERBOSE)$(MAKE) include
-
-help::
-	@echo "  all            - build subdirs: $(SUBDIR_TARGET)"
-	$(if $(filter doc,$(TARGET)), \
-	@echo "  doc            - build documentation")
-	@echo "  scrub          - call scrub recursively"
-	@echo "  clean          - call clean recursively"
-	@echo "  cleanall       - call cleanall recursively"
-	@echo "  install        - build subdirs, install recursively then"
-	@echo "  oldconfig      - call oldconfig recursively"
-	@echo "  txtconfig      - call txtconfig recursively"
-
-.PHONY: $(TARGET) all clean cleanall help install oldconfig txtconfig
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/MAINTAINER b/libdde-linux26/libdde_linux26/mk/tmpl/MAINTAINER
deleted file mode 100644
index 85eb7179..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/MAINTAINER
+++ /dev/null
@@ -1 +0,0 @@
-mailaddr <enter your mail address here>
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/Makefile
deleted file mode 100644
index eb46c32a..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-PKGDIR	?= .
-L4DIR	?= $(PKGDIR)/../..
-
-# the default is to build the listed directories, provided that they
-# contain a Makefile. If you need to change this, uncomment the following
-# line and adapt it.
-# TARGET = idl include src lib server examples doc
-
-include $(L4DIR)/mk/subdir.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/examples/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/examples/Makefile
deleted file mode 100644
index 065f6d87..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/examples/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-PKGDIR ?= ..
-L4DIR  ?= $(PKGDIR)/../..
-
-# create examples demonstrating the use of you package in subdirectories
-# and list those subdirs in the TARGET variable.
-TARGET =
-
-include $(L4DIR)/mk/subdir.mk
-
-
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/idl/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/idl/Makefile
deleted file mode 100644
index 902a1714..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/idl/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# 
-# makefile for package IDL directory
-#
-
-PKGDIR ?= ..
-L4DIR  ?= $(PKGDIR)/../..
-
-# create an idl file an assign its name to IDL
-IDL	= 
-# the default idl type is DCE/dice. Uncomment the next line to change this.
-# IDL_TYPE= <your choice>
-
-include $(L4DIR)/mk/idl.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/include/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/include/Makefile
deleted file mode 100644
index 8d31023f..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/include/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-PKGDIR	?= ..
-L4DIR	?= $(PKGDIR)/../..
-
-# All haeder files found in this directory tree will be automatically
-# installed in a way that they can be included with
-# #include <l4/pkgname/yourfile.h> later.
-# No need to list them in this Makefile.
-
-include $(L4DIR)/mk/include.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/inst b/libdde-linux26/libdde_linux26/mk/tmpl/inst
deleted file mode 100755
index 5e553544..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/inst
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# install default directory hierarchy and default Makefiles
-#
-# Call this script from a newly created package directory.
-
-set -e
-tar c -C "${0%/*}" -f- --exclude=.svn --exclude=inst . | tar xvf -
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/lib/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/lib/Makefile
deleted file mode 100644
index 67d58733..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/lib/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-PKGDIR	?= ..
-L4DIR	?= $(PKGDIR)/../..
-
-# the default is to build the listed directories, provided that they
-# contain a Makefile. If you need to change this, uncomment the following
-# line and adapt it.
-# TARGET = idl src lib server examples doc
-
-include $(L4DIR)/mk/subdir.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/lib/src/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/lib/src/Makefile
deleted file mode 100644
index dfa73716..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/lib/src/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-PKGDIR?= ../..
-L4DIR ?= $(PKGDIR)/../..
-
-# the name of your library
-TARGET	= lib$(PKGNAME).a
-
-# list your .c files here
-SRC_C	= 
-
-# if your library implements the client side of an idl defined in an
-# idl-file of your package, list the idl file name(s) here (no path needed)
-CLIENTIDL =
-
-include $(L4DIR)/mk/lib.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/ptest/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/ptest/Makefile
deleted file mode 100644
index 2fc7ed3b..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/ptest/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-PKGDIR	?= ..
-L4DIR	?= $(PKGDIR)/../..
-
-TARGET	= run
-
-include $(L4DIR)/mk/subdir.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/ptest/run/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/ptest/run/Makefile
deleted file mode 100644
index 321601f0..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/ptest/run/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-PKGDIR	?= ../..
-L4DIR	?= $(PKGDIR)/../..
-
-# insert the binary name of the server to test
-TEST_SERVER	=
-
-# insert the binary name of the application testing the server
-TEST_CLIENT	=
-
-include $(L4DIR)/mk/runux.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/server/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/server/Makefile
deleted file mode 100644
index 67d58733..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/server/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-PKGDIR	?= ..
-L4DIR	?= $(PKGDIR)/../..
-
-# the default is to build the listed directories, provided that they
-# contain a Makefile. If you need to change this, uncomment the following
-# line and adapt it.
-# TARGET = idl src lib server examples doc
-
-include $(L4DIR)/mk/subdir.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/server/src/Makefile b/libdde-linux26/libdde_linux26/mk/tmpl/server/src/Makefile
deleted file mode 100644
index 8b0c2471..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/server/src/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-PKGDIR		?= ../..
-L4DIR		?= $(PKGDIR)/../..
-
-TARGET		= $(PKGNAME)
-# the default relocation address. This may be superseded by a STATIC file.
-DEFAULT_RELOC	= 0x01800000
-
-# list your .c files here
-SRC_C		= main.c
-
-# if your server implements the server side of an idl defined in an idl-file
-# of your package, list the idl file name(s) here (no path needed)
-SERVERIDL	=
-
-# list additional library paths and libraries here
-LIBS		=
-
-include $(L4DIR)/mk/prog.mk
diff --git a/libdde-linux26/libdde_linux26/mk/tmpl/server/src/main.c b/libdde-linux26/libdde_linux26/mk/tmpl/server/src/main.c
deleted file mode 100644
index 65eddcf8..00000000
--- a/libdde-linux26/libdde_linux26/mk/tmpl/server/src/main.c
+++ /dev/null
@@ -1,5 +0,0 @@
-
-int main(int argc, char **argv)
-{
-  return 0;
-}