1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
|
/*
* Wavelan ISA driver
*
* Jean II - HPLB '96
*
* Reorganisation and extension of the driver.
* Original copyrigth follow. See wavelan.p.h for details.
*
* This file contain the declarations of the Wavelan hardware. Note that
* the Wavelan ISA include a i82586 controler (see definitions in
* file i82586.h).
*
* The main difference between the ISA hardware and the pcmcia one is
* the Ethernet Controler (i82586 instead of i82593).
* The i82586 allow multiple transmit buffers. The PSA need to be accessed
* through the host interface.
*/
#ifndef _WAVELAN_H
#define _WAVELAN_H
/* The detection of the wavelan card is made by reading the MAC
* address from the card and checking it. If you have a non AT&T
* product (OEM, like DEC RoamAbout, or Digital Ocean, Epson, ...),
* you might need to modify this part to accomodate your hardware...
*/
const char MAC_ADDRESSES[][3] =
{
{ 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */
{ 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */
/* Add your card here and send me the patch ! */
};
#define WAVELAN_ADDR_SIZE 6 /* Size of a MAC address */
#define WAVELAN_MTU 1500 /* Maximum size of WaveLAN packet */
#define MAXDATAZ (WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU)
/*************************** PC INTERFACE ****************************/
/*
* Host Adaptor structure.
* (base is board port address).
*/
typedef union hacs_u hacs_u;
union hacs_u
{
unsigned short hu_command; /* Command register */
#define HACR_RESET 0x0001 /* Reset board */
#define HACR_CA 0x0002 /* Set Channel Attention for 82586 */
#define HACR_16BITS 0x0004 /* 16 bits operation (0 => 8bits) */
#define HACR_OUT0 0x0008 /* General purpose output pin 0 */
/* not used - must be 1 */
#define HACR_OUT1 0x0010 /* General purpose output pin 1 */
/* not used - must be 1 */
#define HACR_82586_INT_ENABLE 0x0020 /* Enable 82586 interrupts */
#define HACR_MMC_INT_ENABLE 0x0040 /* Enable MMC interrupts */
#define HACR_INTR_CLR_ENABLE 0x0080 /* Enable interrupt status read/clear */
unsigned short hu_status; /* Status Register */
#define HASR_82586_INTR 0x0001 /* Interrupt request from 82586 */
#define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */
#define HASR_MMC_BUSY 0x0004 /* MMC busy indication */
#define HASR_PSA_BUSY 0x0008 /* LAN parameter storage area busy */
};
typedef struct ha_t ha_t;
struct ha_t
{
hacs_u ha_cs; /* Command and status registers */
#define ha_command ha_cs.hu_command
#define ha_status ha_cs.hu_status
unsigned short ha_mmcr; /* Modem Management Ctrl Register */
unsigned short ha_pior0; /* Program I/O Address Register Port 0 */
unsigned short ha_piop0; /* Program I/O Port 0 */
unsigned short ha_pior1; /* Program I/O Address Register Port 1 */
unsigned short ha_piop1; /* Program I/O Port 1 */
unsigned short ha_pior2; /* Program I/O Address Register Port 2 */
unsigned short ha_piop2; /* Program I/O Port 2 */
};
#define HA_SIZE 16
#define hoff(p,f) (unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0)
#define HACR(p) hoff(p, ha_command)
#define HASR(p) hoff(p, ha_status)
#define MMCR(p) hoff(p, ha_mmcr)
#define PIOR0(p) hoff(p, ha_pior0)
#define PIOP0(p) hoff(p, ha_piop0)
#define PIOR1(p) hoff(p, ha_pior1)
#define PIOP1(p) hoff(p, ha_piop1)
#define PIOR2(p) hoff(p, ha_pior2)
#define PIOP2(p) hoff(p, ha_piop2)
/*
* Program I/O Mode Register values.
*/
#define STATIC_PIO 0 /* Mode 1: static mode */
/* RAM access ??? */
#define AUTOINCR_PIO 1 /* Mode 2: auto increment mode */
/* RAM access ??? */
#define AUTODECR_PIO 2 /* Mode 3: auto decrement mode */
/* RAM access ??? */
#define PARAM_ACCESS_PIO 3 /* Mode 4: LAN parameter access mode */
/* Parameter access. */
#define PIO_MASK 3 /* register mask */
#define PIOM(cmd,piono) ((u_short)cmd << 10 << (piono * 2))
#define HACR_DEFAULT (HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2))
#define HACR_INTRON (HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE)
/************************** MEMORY LAYOUT **************************/
/*
* Onboard 64k RAM layout.
* (Offsets from 0x0000.)
*/
#define OFFSET_RU 0x0000 /* 75 % memory */
#define OFFSET_CU 0xC000 /* 25 % memory */
#define OFFSET_SCB (OFFSET_ISCP - sizeof(scb_t))
#define OFFSET_ISCP (OFFSET_SCP - sizeof(iscp_t))
#define OFFSET_SCP I82586_SCP_ADDR
#define RXBLOCKZ (sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ)
#define TXBLOCKZ (sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ)
#define NRXBLOCKS ((OFFSET_CU - OFFSET_RU) / RXBLOCKZ)
#define NTXBLOCKS ((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ)
/********************** PARAMETER STORAGE AREA **********************/
/*
* Parameter Storage Area (PSA).
*/
typedef struct psa_t psa_t;
struct psa_t
{
unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */
unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */
unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */
unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */
unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */
unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */
unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */
unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */
unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */
unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */
unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */
unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */
unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */
#define PSA_UNIVERSAL 0 /* Universal (factory) */
#define PSA_LOCAL 1 /* Local */
unsigned char psa_comp_number; /* [0x1D] Compatability Number: */
#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */
#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */
#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */
#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */
#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */
unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */
unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */
#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */
unsigned char psa_subband; /* [0x20] Subband */
#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */
#define PSA_SUBBAND_2425 1 /* 2425 MHz */
#define PSA_SUBBAND_2460 2 /* 2460 MHz */
#define PSA_SUBBAND_2484 3 /* 2484 MHz */
#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */
unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */
unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */
unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */
unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */
unsigned char psa_encryption_select; /* [0x26] Encryption On Off */
unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */
unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */
unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */
unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */
unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */
unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/
unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */
unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */
};
#define PSA_SIZE 64
/* Calculate offset of a field in the above structure
* Warning : only even addresses are used */
#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
/******************** MODEM MANAGEMENT INTERFACE ********************/
/*
* Modem Management Controller (MMC) write structure.
*/
typedef struct mmw_t mmw_t;
struct mmw_t
{
unsigned char mmw_encr_key[8]; /* encryption key */
unsigned char mmw_encr_enable; /* enable/disable encryption */
#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */
#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */
unsigned char mmw_unused0[1]; /* unused */
unsigned char mmw_des_io_invert; /* Encryption option */
#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */
#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */
unsigned char mmw_unused1[5]; /* unused */
unsigned char mmw_loopt_sel; /* looptest selection */
#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */
#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */
#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */
#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */
#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */
#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */
#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */
unsigned char mmw_jabber_enable; /* jabber timer enable */
/* Abort transmissions > 200 ms */
unsigned char mmw_freeze; /* freeze / unfreeeze signal level */
/* 0 : signal level & qual updated for every new message, 1 : frozen */
unsigned char mmw_anten_sel; /* antenna selection */
#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */
#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */
unsigned char mmw_ifs; /* inter frame spacing */
/* min time between transmission in bit periods (.5 us) - bit 0 ignored */
unsigned char mmw_mod_delay; /* modem delay (synchro) */
unsigned char mmw_jam_time; /* jamming time (after collision) */
unsigned char mmw_unused2[1]; /* unused */
unsigned char mmw_thr_pre_set; /* level threshold preset */
/* Discard all packet with signal < this value (4) */
unsigned char mmw_decay_prm; /* decay parameters */
unsigned char mmw_decay_updat_prm; /* decay update parameterz */
unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */
/* Discard all packet with quality < this value (3) */
unsigned char mmw_netw_id_l; /* NWID low order byte */
unsigned char mmw_netw_id_h; /* NWID high order byte */
/* Network ID or Domain : create virtual net on the air */
/* 2.0 Hardware extension - frequency selection support */
unsigned char mmw_mode_select; /* for analog tests (set to 0) */
unsigned char mmw_unused3[1]; /* unused */
unsigned char mmw_fee_ctrl; /* frequency eeprom control */
#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */
#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */
#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */
#define MMW_FEE_CTRL_READ 0x06 /* Read */
#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */
#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */
#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */
#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */
#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */
#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */
#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */
#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */
#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */
/* Never issue this command (PRDS) : it's irreversible !!! */
unsigned char mmw_fee_addr; /* EEprom address */
#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */
#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */
#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */
#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */
#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */
#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */
unsigned char mmw_fee_data_l; /* Write data to EEprom */
unsigned char mmw_fee_data_h; /* high octet */
unsigned char mmw_ext_ant; /* Setting for external antenna */
#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */
#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */
#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
};
#define MMW_SIZE 37
#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
/*
* Modem Management Controller (MMC) read structure.
*/
typedef struct mmr_t mmr_t;
struct mmr_t
{
unsigned char mmr_unused0[8]; /* unused */
unsigned char mmr_des_status; /* encryption status */
unsigned char mmr_des_avail; /* encryption available (0x55 read) */
#define MMR_DES_AVAIL_DES 0x55 /* DES available */
#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */
unsigned char mmr_des_io_invert; /* des I/O invert register */
unsigned char mmr_unused1[5]; /* unused */
unsigned char mmr_dce_status; /* DCE status */
#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */
#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */
#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */
#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */
unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */
unsigned char mmr_unused2[2]; /* unused */
unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */
unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */
/* Warning : Read high order octet first !!! */
unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */
unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */
unsigned char mmr_thr_pre_set; /* level threshold preset */
#define MMR_THR_PRE_SET 0x3F /* level threshold preset */
#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */
unsigned char mmr_signal_lvl; /* signal level */
#define MMR_SIGNAL_LVL 0x3F /* signal level */
#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */
unsigned char mmr_silence_lvl; /* silence level (noise) */
#define MMR_SILENCE_LVL 0x3F /* silence level */
#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */
unsigned char mmr_sgnl_qual; /* signal quality */
#define MMR_SGNL_QUAL 0x0F /* signal quality */
#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */
unsigned char mmr_netw_id_l; /* NWID low order byte ??? */
unsigned char mmr_unused3[3]; /* unused */
/* 2.0 Hardware extension - frequency selection support */
unsigned char mmr_fee_status; /* Status of frequency eeprom */
#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */
#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */
#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */
unsigned char mmr_unused4[1]; /* unused */
unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */
unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */
};
#define MMR_SIZE 36
#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
/* Make the two above structures one */
typedef union mm_t
{
struct mmw_t w; /* Write to the mmc */
struct mmr_t r; /* Read from the mmc */
} mm_t;
#endif /* _WAVELAN_H */
/*
* This software may only be used and distributed
* according to the terms of the GNU Public License.
*
* For more details, see wavelan.c.
*/
|
