blob: 0024a9372b19b273b7b636bf04553f75a5b46ed0 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
|
[Introduction]
eth-multiplexer is a network multiplexer. It creates virtual ethernet interface and dispatches the packet to the right user program that opens its virtual interface. It also works as a bridge to connect the real ethernet interface and the virtual ones.
[Usage]
Usage: eth-multiplexer [OPTION...]
Hurd multiplexer server.
-i, --interface=DEVICE Network interface to use
-?, --help Give this help list
--usage Give a short usage message
-V, --version Print program version
Mandatory or optional arguments to long options are also mandatory or optional
for any corresponding short options.
The '-i' option specifies the network interface the translator sits on. eth-multiplexer can only connect to one network interface and the '-i' option should be only used once. DEVICE is a device file that is created by the devnode translator.
[Internal]
eth-multiplexer implements the server side functions in device.defs, so other programs can access the virtual device as other devices. All information about the virtual interface is kept in the vether_device structure.
When eth-multiplexer gets a packet from a virtual interface (which happens in ds_device_write) or from the real interface (which happens in ethernet_demuxer), it sends the packet to all other interfaces. eth-multipexer has BPF filters for each client. The BPF filter decides whether to deliver the packet. The packet delivery is done by deliver_pack(). There is no filter for the real network interface in eth-multiplexer, so every packet from the virtual interface will be sent to the real interface whose filter will decide the destination of the packet.
eth-multiplexer sets the real interface into the promiscuous mode, so eth-multiplexer can receive the packet with the virtual interface's hardware address from the real interface.
|
