diff options
Diffstat (limited to 'libdde_linux26/contrib/include/scsi/scsi_devinfo.h')
| -rw-r--r-- | libdde_linux26/contrib/include/scsi/scsi_devinfo.h | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/libdde_linux26/contrib/include/scsi/scsi_devinfo.h b/libdde_linux26/contrib/include/scsi/scsi_devinfo.h new file mode 100644 index 00000000..b4ddd3b1 --- /dev/null +++ b/libdde_linux26/contrib/include/scsi/scsi_devinfo.h @@ -0,0 +1,33 @@ +#ifndef _SCSI_SCSI_DEVINFO_H +#define _SCSI_SCSI_DEVINFO_H +/* + * Flags for SCSI devices that need special treatment + */ +#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ +#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, + deprecated: Use max_luns=N */ +#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ +#define BLIST_KEY 0x008 /* unlock by special command */ +#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ +#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ +#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ +#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ +#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ +#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ +#define BLIST_INQUIRY_36 0x400 /* override additional length field */ +#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ +#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ +#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ +#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ +#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ +#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ +#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs + (if HBA supports more than 8 LUNs) */ +#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ +#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ +#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ +#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ +#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ +#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ +#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ +#endif |