diff options
Diffstat (limited to 'dde_e1000/e1000_ethtool.c')
| -rw-r--r-- | dde_e1000/e1000_ethtool.c | 1989 |
1 files changed, 1989 insertions, 0 deletions
diff --git a/dde_e1000/e1000_ethtool.c b/dde_e1000/e1000_ethtool.c new file mode 100644 index 00000000..fc2b92a2 --- /dev/null +++ b/dde_e1000/e1000_ethtool.c @@ -0,0 +1,1989 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for e1000 */ + +#include "e1000.h" +#include <asm/uaccess.h> + +#include <ddekit/timer.h> + +struct e1000_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \ + offsetof(struct e1000_adapter, m) +static const struct e1000_stats e1000_gstrings_stats[] = { + { "rx_packets", E1000_STAT(stats.gprc) }, + { "tx_packets", E1000_STAT(stats.gptc) }, + { "rx_bytes", E1000_STAT(stats.gorcl) }, + { "tx_bytes", E1000_STAT(stats.gotcl) }, + { "rx_broadcast", E1000_STAT(stats.bprc) }, + { "tx_broadcast", E1000_STAT(stats.bptc) }, + { "rx_multicast", E1000_STAT(stats.mprc) }, + { "tx_multicast", E1000_STAT(stats.mptc) }, + { "rx_errors", E1000_STAT(stats.rxerrc) }, + { "tx_errors", E1000_STAT(stats.txerrc) }, + { "tx_dropped", E1000_STAT(net_stats.tx_dropped) }, + { "multicast", E1000_STAT(stats.mprc) }, + { "collisions", E1000_STAT(stats.colc) }, + { "rx_length_errors", E1000_STAT(stats.rlerrc) }, + { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) }, + { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, + { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, + { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, + { "rx_missed_errors", E1000_STAT(stats.mpc) }, + { "tx_aborted_errors", E1000_STAT(stats.ecol) }, + { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, + { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) }, + { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) }, + { "tx_window_errors", E1000_STAT(stats.latecol) }, + { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, + { "tx_deferred_ok", E1000_STAT(stats.dc) }, + { "tx_single_coll_ok", E1000_STAT(stats.scc) }, + { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, + { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, + { "tx_restart_queue", E1000_STAT(restart_queue) }, + { "rx_long_length_errors", E1000_STAT(stats.roc) }, + { "rx_short_length_errors", E1000_STAT(stats.ruc) }, + { "rx_align_errors", E1000_STAT(stats.algnerrc) }, + { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) }, + { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) }, + { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) }, + { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) }, + { "tx_flow_control_xon", E1000_STAT(stats.xontxc) }, + { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, + { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, + { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, + { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, + { "rx_header_split", E1000_STAT(rx_hdr_split) }, + { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, + { "tx_smbus", E1000_STAT(stats.mgptc) }, + { "rx_smbus", E1000_STAT(stats.mgprc) }, + { "dropped_smbus", E1000_STAT(stats.mgpdc) }, +}; + +#define E1000_QUEUE_STATS_LEN 0 +#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) +#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN) +static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test) + +static int e1000_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (hw->media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); + if (hw->phy_type == e1000_phy_ife) + ecmd->supported &= ~SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_TP; + + if (hw->autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy_addr; + + if (hw->mac_type == e1000_82543) + ecmd->transceiver = XCVR_EXTERNAL; + else + ecmd->transceiver = XCVR_INTERNAL; + + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); + + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); + + ecmd->port = PORT_FIBRE; + + if (hw->mac_type >= e1000_82545) + ecmd->transceiver = XCVR_INTERNAL; + else + ecmd->transceiver = XCVR_EXTERNAL; + } + + if (er32(STATUS) & E1000_STATUS_LU) { + + e1000_get_speed_and_duplex(hw, &adapter->link_speed, + &adapter->link_duplex); + ecmd->speed = adapter->link_speed; + + /* unfortunatly FULL_DUPLEX != DUPLEX_FULL + * and HALF_DUPLEX != DUPLEX_HALF */ + + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) || + hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + +static int e1000_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (e1000_check_phy_reset_block(hw)) { + DPRINTK(DRV, ERR, "Cannot change link characteristics " + "when SoL/IDER is active.\n"); + return -EINVAL; + } + + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + hw->autoneg = 1; + if (hw->media_type == e1000_media_type_fiber) + hw->autoneg_advertised = ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + else + hw->autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + ecmd->advertising = hw->autoneg_advertised; + } else + if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__E1000_RESETTING, &adapter->flags); + return -EINVAL; + } + + /* reset the link */ + + if (netif_running(adapter->netdev)) { + e1000_down(adapter); + e1000_up(adapter); + } else + e1000_reset(adapter); + + clear_bit(__E1000_RESETTING, &adapter->flags); + return 0; +} + +static void e1000_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pause->autoneg = + (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); + + if (hw->fc == E1000_FC_RX_PAUSE) + pause->rx_pause = 1; + else if (hw->fc == E1000_FC_TX_PAUSE) + pause->tx_pause = 1; + else if (hw->fc == E1000_FC_FULL) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int e1000_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int retval = 0; + + adapter->fc_autoneg = pause->autoneg; + + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + + if (pause->rx_pause && pause->tx_pause) + hw->fc = E1000_FC_FULL; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc = E1000_FC_RX_PAUSE; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc = E1000_FC_TX_PAUSE; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc = E1000_FC_NONE; + + hw->original_fc = hw->fc; + + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + if (netif_running(adapter->netdev)) { + e1000_down(adapter); + e1000_up(adapter); + } else + e1000_reset(adapter); + } else + retval = ((hw->media_type == e1000_media_type_fiber) ? + e1000_setup_link(hw) : e1000_force_mac_fc(hw)); + + clear_bit(__E1000_RESETTING, &adapter->flags); + return retval; +} + +static u32 e1000_get_rx_csum(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + return adapter->rx_csum; +} + +static int e1000_set_rx_csum(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + adapter->rx_csum = data; + + if (netif_running(netdev)) + e1000_reinit_locked(adapter); + else + e1000_reset(adapter); + return 0; +} + +static u32 e1000_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static int e1000_set_tx_csum(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (hw->mac_type < e1000_82543) { + if (!data) + return -EINVAL; + return 0; + } + + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +static int e1000_set_tso(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if ((hw->mac_type < e1000_82544) || + (hw->mac_type == e1000_82547)) + return data ? -EINVAL : 0; + + if (data) + netdev->features |= NETIF_F_TSO; + else + netdev->features &= ~NETIF_F_TSO; + + if (data && (adapter->hw.mac_type > e1000_82547_rev_2)) + netdev->features |= NETIF_F_TSO6; + else + netdev->features &= ~NETIF_F_TSO6; + + DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); + adapter->tso_force = true; + return 0; +} + +static u32 e1000_get_msglevel(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void e1000_set_msglevel(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int e1000_get_regs_len(struct net_device *netdev) +{ +#define E1000_REGS_LEN 32 + return E1000_REGS_LEN * sizeof(u32); +} + +static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, + void *p) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + + memset(p, 0, E1000_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + regs_buff[0] = er32(CTRL); + regs_buff[1] = er32(STATUS); + + regs_buff[2] = er32(RCTL); + regs_buff[3] = er32(RDLEN); + regs_buff[4] = er32(RDH); + regs_buff[5] = er32(RDT); + regs_buff[6] = er32(RDTR); + + regs_buff[7] = er32(TCTL); + regs_buff[8] = er32(TDLEN); + regs_buff[9] = er32(TDH); + regs_buff[10] = er32(TDT); + regs_buff[11] = er32(TIDV); + + regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */ + if (hw->phy_type == e1000_phy_igp) { + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, + IGP01E1000_PHY_AGC_A); + e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[13] = (u32)phy_data; /* cable length */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, + IGP01E1000_PHY_AGC_B); + e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[14] = (u32)phy_data; /* cable length */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, + IGP01E1000_PHY_AGC_C); + e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[15] = (u32)phy_data; /* cable length */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, + IGP01E1000_PHY_AGC_D); + e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[16] = (u32)phy_data; /* cable length */ + regs_buff[17] = 0; /* extended 10bt distance (not needed) */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0); + e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[18] = (u32)phy_data; /* cable polarity */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, + IGP01E1000_PHY_PCS_INIT_REG); + e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG & + IGP01E1000_PHY_PAGE_SELECT, &phy_data); + regs_buff[19] = (u32)phy_data; /* cable polarity */ + regs_buff[20] = 0; /* polarity correction enabled (always) */ + regs_buff[22] = 0; /* phy receive errors (unavailable) */ + regs_buff[23] = regs_buff[18]; /* mdix mode */ + e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0); + } else { + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + regs_buff[13] = (u32)phy_data; /* cable length */ + regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + regs_buff[17] = (u32)phy_data; /* extended 10bt distance */ + regs_buff[18] = regs_buff[13]; /* cable polarity */ + regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[20] = regs_buff[17]; /* polarity correction */ + /* phy receive errors */ + regs_buff[22] = adapter->phy_stats.receive_errors; + regs_buff[23] = regs_buff[13]; /* mdix mode */ + } + regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + if (hw->mac_type >= e1000_82540 && + hw->mac_type < e1000_82571 && + hw->media_type == e1000_media_type_copper) { + regs_buff[26] = er32(MANC); + } +} + +static int e1000_get_eeprom_len(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + return hw->eeprom.word_size * 2; +} + +static int e1000_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + if (hw->eeprom.type == e1000_eeprom_spi) + ret_val = e1000_read_eeprom(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + else { + for (i = 0; i < last_word - first_word + 1; i++) { + ret_val = e1000_read_eeprom(hw, first_word + i, 1, + &eeprom_buff[i]); + if (ret_val) + break; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int e1000_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = hw->eeprom.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + ret_val = e1000_read_eeprom(hw, first_word, 1, + &eeprom_buff[0]); + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + ret_val = e1000_read_eeprom(hw, last_word, 1, + &eeprom_buff[last_word - first_word]); + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); + + ret_val = e1000_write_eeprom(hw, first_word, + last_word - first_word + 1, eeprom_buff); + + /* Update the checksum over the first part of the EEPROM if needed + * and flush shadow RAM for 82573 conrollers */ + if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || + (hw->mac_type == e1000_82573))) + e1000_update_eeprom_checksum(hw); + + kfree(eeprom_buff); + return ret_val; +} + +static void e1000_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + char firmware_version[32]; + u16 eeprom_data; + + strncpy(drvinfo->driver, e1000_driver_name, 32); + strncpy(drvinfo->version, e1000_driver_version, 32); + + /* EEPROM image version # is reported as firmware version # for + * 8257{1|2|3} controllers */ + e1000_read_eeprom(hw, 5, 1, &eeprom_data); + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + case e1000_82573: + case e1000_80003es2lan: + case e1000_ich8lan: + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + break; + default: + sprintf(firmware_version, "N/A"); + } + + strncpy(drvinfo->fw_version, firmware_version, 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->regdump_len = e1000_get_regs_len(netdev); + drvinfo->eedump_len = e1000_get_eeprom_len(netdev); +} + +static void e1000_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + e1000_mac_type mac_type = hw->mac_type; + struct e1000_tx_ring *txdr = adapter->tx_ring; + struct e1000_rx_ring *rxdr = adapter->rx_ring; + + ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD : + E1000_MAX_82544_RXD; + ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD : + E1000_MAX_82544_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int e1000_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + e1000_mac_type mac_type = hw->mac_type; + struct e1000_tx_ring *txdr, *tx_old; + struct e1000_rx_ring *rxdr, *rx_old; + int i, err; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + + if (netif_running(adapter->netdev)) + e1000_down(adapter); + + tx_old = adapter->tx_ring; + rx_old = adapter->rx_ring; + + err = -ENOMEM; + txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL); + if (!txdr) + goto err_alloc_tx; + + rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL); + if (!rxdr) + goto err_alloc_rx; + + adapter->tx_ring = txdr; + adapter->rx_ring = rxdr; + + rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD); + rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ? + E1000_MAX_RXD : E1000_MAX_82544_RXD)); + rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); + + txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD); + txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ? + E1000_MAX_TXD : E1000_MAX_82544_TXD)); + txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); + + for (i = 0; i < adapter->num_tx_queues; i++) + txdr[i].count = txdr->count; + for (i = 0; i < adapter->num_rx_queues; i++) + rxdr[i].count = rxdr->count; + + if (netif_running(adapter->netdev)) { + /* Try to get new resources before deleting old */ + err = e1000_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + err = e1000_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* save the new, restore the old in order to free it, + * then restore the new back again */ + + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + e1000_free_all_rx_resources(adapter); + e1000_free_all_tx_resources(adapter); + kfree(tx_old); + kfree(rx_old); + adapter->rx_ring = rxdr; + adapter->tx_ring = txdr; + err = e1000_up(adapter); + if (err) + goto err_setup; + } + + clear_bit(__E1000_RESETTING, &adapter->flags); + return 0; +err_setup_tx: + e1000_free_all_rx_resources(adapter); +err_setup_rx: + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + kfree(rxdr); +err_alloc_rx: + kfree(txdr); +err_alloc_tx: + e1000_up(adapter); +err_setup: + clear_bit(__E1000_RESETTING, &adapter->flags); + return err; +} + +static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + static const u32 test[] = + {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + u8 __iomem *address = hw->hw_addr + reg; + u32 read; + int i; + + for (i = 0; i < ARRAY_SIZE(test); i++) { + writel(write & test[i], address); + read = readl(address); + if (read != (write & test[i] & mask)) { + DPRINTK(DRV, ERR, "pattern test reg %04X failed: " + "got 0x%08X expected 0x%08X\n", + reg, read, (write & test[i] & mask)); + *data = reg; + return true; + } + } + return false; +} + +static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + u8 __iomem *address = hw->hw_addr + reg; + u32 read; + + writel(write & mask, address); + read = readl(address); + if ((read & mask) != (write & mask)) { + DPRINTK(DRV, ERR, "set/check reg %04X test failed: " + "got 0x%08X expected 0x%08X\n", + reg, (read & mask), (write & mask)); + *data = reg; + return true; + } + return false; +} + +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, \ + (hw->mac_type >= e1000_82543) \ + ? E1000_##reg : E1000_82542_##reg, \ + mask, write)) \ + return 1; \ + } while (0) + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, \ + (hw->mac_type >= e1000_82543) \ + ? E1000_##reg : E1000_82542_##reg, \ + mask, write)) \ + return 1; \ + } while (0) + +static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) +{ + u32 value, before, after; + u32 i, toggle; + struct e1000_hw *hw = &adapter->hw; + + /* The status register is Read Only, so a write should fail. + * Some bits that get toggled are ignored. + */ + switch (hw->mac_type) { + /* there are several bits on newer hardware that are r/w */ + case e1000_82571: + case e1000_82572: + case e1000_80003es2lan: + toggle = 0x7FFFF3FF; + break; + case e1000_82573: + case e1000_ich8lan: + toggle = 0x7FFFF033; + break; + default: + toggle = 0xFFFFF833; + break; + } + + before = er32(STATUS); + value = (er32(STATUS) & toggle); + ew32(STATUS, toggle); + after = er32(STATUS) & toggle; + if (value != after) { + DPRINTK(DRV, ERR, "failed STATUS register test got: " + "0x%08X expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + ew32(STATUS, before); + + if (hw->mac_type != e1000_ich8lan) { + REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); + } + + REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); + REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8); + REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF); + REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); + + REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); + + before = (hw->mac_type == e1000_ich8lan ? + 0x06C3B33E : 0x06DFB3FE); + REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); + REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); + + if (hw->mac_type >= e1000_82543) { + + REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); + REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); + if (hw->mac_type != e1000_ich8lan) + REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); + REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); + value = (hw->mac_type == e1000_ich8lan ? + E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + for (i = 0; i < value; i++) { + REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, + 0xFFFFFFFF); + } + + } else { + + REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF); + REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF); + REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF); + + } + + value = (hw->mac_type == e1000_ich8lan ? + E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE); + for (i = 0; i < value; i++) + REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); + + *data = 0; + return 0; +} + +static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + u16 temp; + u16 checksum = 0; + u16 i; + + *data = 0; + /* Read and add up the contents of the EEPROM */ + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) { + *data = 1; + break; + } + checksum += temp; + } + + /* If Checksum is not Correct return error else test passed */ + if ((checksum != (u16)EEPROM_SUM) && !(*data)) + *data = 2; + + return *data; +} + +static irqreturn_t e1000_test_intr(int irq, void *data) +{ + struct net_device *netdev = (struct net_device *)data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + adapter->test_icr |= er32(ICR); + + return IRQ_HANDLED; +} + +static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) +{ + struct net_device *netdev = adapter->netdev; + u32 mask, i = 0; + bool shared_int = true; + u32 irq = adapter->pdev->irq; + struct e1000_hw *hw = &adapter->hw; + + *data = 0; + + /* NOTE: we don't test MSI interrupts here, yet */ + /* Hook up test interrupt handler just for this test */ + if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + netdev)) + shared_int = false; + else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, + netdev->name, netdev)) { + *data = 1; + return -1; + } + DPRINTK(HW, INFO, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + ew32(IMC, 0xFFFFFFFF); + msleep(10); + + /* Test each interrupt */ + for (; i < 10; i++) { + + if (hw->mac_type == e1000_ich8lan && i == 8) + continue; + + /* Interrupt to test */ + mask = 1 << i; + + if (!shared_int) { + /* Disable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMC, mask); + ew32(ICS, mask); + msleep(10); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* Enable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was not posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMS, mask); + ew32(ICS, mask); + msleep(10); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMC, ~mask & 0x00007FFF); + ew32(ICS, ~mask & 0x00007FFF); + msleep(10); + + if (adapter->test_icr) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + ew32(IMC, 0xFFFFFFFF); + msleep(10); + + /* Unhook test interrupt handler */ + free_irq(irq, netdev); + + return *data; +} + +static void e1000_free_desc_rings(struct e1000_adapter *adapter) +{ + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + int i; + + if (txdr->desc && txdr->buffer_info) { + for (i = 0; i < txdr->count; i++) { + if (txdr->buffer_info[i].dma) + pci_unmap_single(pdev, txdr->buffer_info[i].dma, + txdr->buffer_info[i].length, + PCI_DMA_TODEVICE); + if (txdr->buffer_info[i].skb) + dev_kfree_skb(txdr->buffer_info[i].skb); + } + } + + if (rxdr->desc && rxdr->buffer_info) { + for (i = 0; i < rxdr->count; i++) { + if (rxdr->buffer_info[i].dma) + pci_unmap_single(pdev, rxdr->buffer_info[i].dma, + rxdr->buffer_info[i].length, + PCI_DMA_FROMDEVICE); + if (rxdr->buffer_info[i].skb) + dev_kfree_skb(rxdr->buffer_info[i].skb); + } + } + + if (txdr->desc) { + pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma); + txdr->desc = NULL; + } + if (rxdr->desc) { + pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); + rxdr->desc = NULL; + } + + kfree(txdr->buffer_info); + txdr->buffer_info = NULL; + kfree(rxdr->buffer_info); + rxdr->buffer_info = NULL; + + return; +} + +static int e1000_setup_desc_rings(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + u32 rctl; + int i, ret_val; + + /* Setup Tx descriptor ring and Tx buffers */ + + if (!txdr->count) + txdr->count = E1000_DEFAULT_TXD; + + txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer), + GFP_KERNEL); + if (!txdr->buffer_info) { + ret_val = 1; + goto err_nomem; + } + + txdr->size = txdr->count * sizeof(struct e1000_tx_desc); + txdr->size = ALIGN(txdr->size, 4096); + txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); + if (!txdr->desc) { + ret_val = 2; + goto err_nomem; + } + memset(txdr->desc, 0, txdr->size); + txdr->next_to_use = txdr->next_to_clean = 0; + + ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF)); + ew32(TDBAH, ((u64)txdr->dma >> 32)); + ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc)); + ew32(TDH, 0); + ew32(TDT, 0); + ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | + E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | + E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); + + for (i = 0; i < txdr->count; i++) { + struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i); + struct sk_buff *skb; + unsigned int size = 1024; + + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) { + ret_val = 3; + goto err_nomem; + } + skb_put(skb, size); + txdr->buffer_info[i].skb = skb; + txdr->buffer_info[i].length = skb->len; + txdr->buffer_info[i].dma = + pci_map_single(pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); + tx_desc->lower.data = cpu_to_le32(skb->len); + tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | + E1000_TXD_CMD_IFCS | + E1000_TXD_CMD_RPS); + tx_desc->upper.data = 0; + } + + /* Setup Rx descriptor ring and Rx buffers */ + + if (!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; + + rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), + GFP_KERNEL); + if (!rxdr->buffer_info) { + ret_val = 4; + goto err_nomem; + } + + rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); + rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); + if (!rxdr->desc) { + ret_val = 5; + goto err_nomem; + } + memset(rxdr->desc, 0, rxdr->size); + rxdr->next_to_use = rxdr->next_to_clean = 0; + + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF)); + ew32(RDBAH, ((u64)rxdr->dma >> 32)); + ew32(RDLEN, rxdr->size); + ew32(RDH, 0); + ew32(RDT, 0); + rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (hw->mc_filter_type << E1000_RCTL_MO_SHIFT); + ew32(RCTL, rctl); + + for (i = 0; i < rxdr->count; i++) { + struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); + struct sk_buff *skb; + + skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); + if (!skb) { + ret_val = 6; + goto err_nomem; + } + skb_reserve(skb, NET_IP_ALIGN); + rxdr->buffer_info[i].skb = skb; + rxdr->buffer_info[i].length = E1000_RXBUFFER_2048; + rxdr->buffer_info[i].dma = + pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048, + PCI_DMA_FROMDEVICE); + rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); + memset(skb->data, 0x00, skb->len); + } + + return 0; + +err_nomem: + e1000_free_desc_rings(adapter); + return ret_val; +} + +static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + e1000_write_phy_reg(hw, 29, 0x001F); + e1000_write_phy_reg(hw, 30, 0x8FFC); + e1000_write_phy_reg(hw, 29, 0x001A); + e1000_write_phy_reg(hw, 30, 0x8FF0); +} + +static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 phy_reg; + + /* Because we reset the PHY above, we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock. This + * value defaults back to a 2.5MHz clock when the PHY is reset. + */ + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); + phy_reg |= M88E1000_EPSCR_TX_CLK_25; + e1000_write_phy_reg(hw, + M88E1000_EXT_PHY_SPEC_CTRL, phy_reg); + + /* In addition, because of the s/w reset above, we need to enable + * CRS on TX. This must be set for both full and half duplex + * operation. + */ + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); + phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + e1000_write_phy_reg(hw, + M88E1000_PHY_SPEC_CTRL, phy_reg); +} + +static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg; + u16 phy_reg; + + /* Setup the Device Control Register for PHY loopback test. */ + + ctrl_reg = er32(CTRL); + ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */ + E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + + ew32(CTRL, ctrl_reg); + + /* Read the PHY Specific Control Register (0x10) */ + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); + + /* Clear Auto-Crossover bits in PHY Specific Control Register + * (bits 6:5). + */ + phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE; + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg); + + /* Perform software reset on the PHY */ + e1000_phy_reset(hw); + + /* Have to setup TX_CLK and TX_CRS after software reset */ + e1000_phy_reset_clk_and_crs(adapter); + + e1000_write_phy_reg(hw, PHY_CTRL, 0x8100); + + /* Wait for reset to complete. */ + udelay(500); + + /* Have to setup TX_CLK and TX_CRS after software reset */ + e1000_phy_reset_clk_and_crs(adapter); + + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + e1000_phy_disable_receiver(adapter); + + /* Set the loopback bit in the PHY control register. */ + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + phy_reg |= MII_CR_LOOPBACK; + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + + /* Setup TX_CLK and TX_CRS one more time. */ + e1000_phy_reset_clk_and_crs(adapter); + + /* Check Phy Configuration */ + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg != 0x4100) + return 9; + + e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); + if (phy_reg != 0x0070) + return 10; + + e1000_read_phy_reg(hw, 29, &phy_reg); + if (phy_reg != 0x001A) + return 11; + + return 0; +} + +static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg = 0; + u32 stat_reg = 0; + + hw->autoneg = false; + + if (hw->phy_type == e1000_phy_m88) { + /* Auto-MDI/MDIX Off */ + e1000_write_phy_reg(hw, + M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x9140); + /* autoneg off */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x8140); + } else if (hw->phy_type == e1000_phy_gg82563) + e1000_write_phy_reg(hw, + GG82563_PHY_KMRN_MODE_CTRL, + 0x1CC); + + ctrl_reg = er32(CTRL); + + if (hw->phy_type == e1000_phy_ife) { + /* force 100, set loopback */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x6100); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_100 |/* Force Speed to 100 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } else { + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } + + if (hw->media_type == e1000_media_type_copper && + hw->phy_type == e1000_phy_m88) + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + else { + /* Set the ILOS bit on the fiber Nic is half + * duplex link is detected. */ + stat_reg = er32(STATUS); + if ((stat_reg & E1000_STATUS_FD) == 0) + ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); + } + + ew32(CTRL, ctrl_reg); + + /* Disable the receiver on the PHY so when a cable is plugged in, the + * PHY does not begin to autoneg when a cable is reconnected to the NIC. + */ + if (hw->phy_type == e1000_phy_m88) + e1000_phy_disable_receiver(adapter); + + udelay(500); + + return 0; +} + +static int e1000_set_phy_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 phy_reg = 0; + u16 count = 0; + + switch (hw->mac_type) { + case e1000_82543: + if (hw->media_type == e1000_media_type_copper) { + /* Attempt to setup Loopback mode on Non-integrated PHY. + * Some PHY registers get corrupted at random, so + * attempt this 10 times. + */ + while (e1000_nonintegrated_phy_loopback(adapter) && + count++ < 10); + if (count < 11) + return 0; + } + break; + + case e1000_82544: + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + case e1000_82571: + case e1000_82572: + case e1000_82573: + case e1000_80003es2lan: + case e1000_ich8lan: + return e1000_integrated_phy_loopback(adapter); + break; + + default: + /* Default PHY loopback work is to read the MII + * control register and assert bit 14 (loopback mode). + */ + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + phy_reg |= MII_CR_LOOPBACK; + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + return 0; + break; + } + + return 8; +} + +static int e1000_setup_loopback_test(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac_type) { + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + return e1000_set_phy_loopback(adapter); + break; + case e1000_82571: + case e1000_82572: +#define E1000_SERDES_LB_ON 0x410 + e1000_set_phy_loopback(adapter); + ew32(SCTL, E1000_SERDES_LB_ON); + msleep(10); + return 0; + break; + default: + rctl = er32(RCTL); + rctl |= E1000_RCTL_LBM_TCVR; + ew32(RCTL, rctl); + return 0; + } + } else if (hw->media_type == e1000_media_type_copper) + return e1000_set_phy_loopback(adapter); + + return 7; +} + +static void e1000_loopback_cleanup(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u16 phy_reg; + + rctl = er32(RCTL); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + ew32(RCTL, rctl); + + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { +#define E1000_SERDES_LB_OFF 0x400 + ew32(SCTL, E1000_SERDES_LB_OFF); + msleep(10); + break; + } + /* Fall Through */ + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + default: + hw->autoneg = true; + if (hw->phy_type == e1000_phy_gg82563) + e1000_write_phy_reg(hw, + GG82563_PHY_KMRN_MODE_CTRL, + 0x180); + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { + phy_reg &= ~MII_CR_LOOPBACK; + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + e1000_phy_reset(hw); + } + break; + } +} + +static void e1000_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size &= ~1; + memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); + memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); + memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); +} + +static int e1000_check_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + frame_size &= ~1; + if (*(skb->data + 3) == 0xFF) { + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && + (*(skb->data + frame_size / 2 + 12) == 0xAF)) { + return 0; + } + } + return 13; +} + +static int e1000_run_loopback_test(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + int i, j, k, l, lc, good_cnt, ret_val=0; + unsigned long time; + + ew32(RDT, rxdr->count - 1); + + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rxdr->count <= txdr->count) + lc = ((txdr->count / 64) * 2) + 1; + else + lc = ((rxdr->count / 64) * 2) + 1; + + k = l = 0; + for (j = 0; j <= lc; j++) { /* loop count loop */ + for (i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + 1024); + pci_dma_sync_single_for_device(pdev, + txdr->buffer_info[k].dma, + txdr->buffer_info[k].length, + PCI_DMA_TODEVICE); + if (unlikely(++k == txdr->count)) k = 0; + } + ew32(TDT, k); + msleep(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rxdr->buffer_info[l].dma, + rxdr->buffer_info[l].length, + PCI_DMA_FROMDEVICE); + + ret_val = e1000_check_lbtest_frame( + rxdr->buffer_info[l].skb, + 1024); + if (!ret_val) + good_cnt++; + if (unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while (good_cnt < 64 && jiffies < (time + 20)); + if (good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if (jiffies >= (time + 2)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ + return ret_val; +} + +static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (e1000_check_phy_reset_block(hw)) { + DPRINTK(DRV, ERR, "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + + *data = e1000_setup_desc_rings(adapter); + if (*data) + goto out; + *data = e1000_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + *data = e1000_run_loopback_test(adapter); + e1000_loopback_cleanup(adapter); + +err_loopback: + e1000_free_desc_rings(adapter); +out: + return *data; +} + +static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + *data = 0; + if (hw->media_type == e1000_media_type_internal_serdes) { + int i = 0; + hw->serdes_link_down = true; + + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ + do { + e1000_check_for_link(hw); + if (!hw->serdes_link_down) + return *data; + msleep(20); + } while (i++ < 3750); + + *data = 1; + } else { + e1000_check_for_link(hw); + if (hw->autoneg) /* if auto_neg is set wait for it */ + msleep(4000); + + if (!(er32(STATUS) & E1000_STATUS_LU)) { + *data = 1; + } + } + return *data; +} + +static int e1000_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_TEST: + return E1000_TEST_LEN; + case ETH_SS_STATS: + return E1000_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void e1000_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + bool if_running = netif_running(netdev); + + set_bit(__E1000_TESTING, &adapter->flags); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + /* save speed, duplex, autoneg settings */ + u16 autoneg_advertised = hw->autoneg_advertised; + u8 forced_speed_duplex = hw->forced_speed_duplex; + u8 autoneg = hw->autoneg; + + DPRINTK(HW, INFO, "offline testing starting\n"); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + e1000_reset(adapter); + + if (e1000_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000_reset(adapter); + if (e1000_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000_reset(adapter); + if (e1000_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000_reset(adapter); + /* make sure the phy is powered up */ + e1000_power_up_phy(adapter); + if (e1000_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* restore speed, duplex, autoneg settings */ + hw->autoneg_advertised = autoneg_advertised; + hw->forced_speed_duplex = forced_speed_duplex; + hw->autoneg = autoneg; + + e1000_reset(adapter); + clear_bit(__E1000_TESTING, &adapter->flags); + if (if_running) + dev_open(netdev); + } else { + DPRINTK(HW, INFO, "online testing starting\n"); + /* Online tests */ + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__E1000_TESTING, &adapter->flags); + } + msleep_interruptible(4 * 1000); +} + +static int e1000_wol_exclusion(struct e1000_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct e1000_hw *hw = &adapter->hw; + int retval = 1; /* fail by default */ + + switch (hw->device_id) { + case E1000_DEV_ID_82542: + case E1000_DEV_ID_82543GC_FIBER: + case E1000_DEV_ID_82543GC_COPPER: + case E1000_DEV_ID_82544EI_FIBER: + case E1000_DEV_ID_82546EB_QUAD_COPPER: + case E1000_DEV_ID_82545EM_FIBER: + case E1000_DEV_ID_82545EM_COPPER: + case E1000_DEV_ID_82546GB_QUAD_COPPER: + case E1000_DEV_ID_82546GB_PCIE: + case E1000_DEV_ID_82571EB_SERDES_QUAD: + /* these don't support WoL at all */ + wol->supported = 0; + break; + case E1000_DEV_ID_82546EB_FIBER: + case E1000_DEV_ID_82546GB_FIBER: + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82571EB_COPPER: + /* Wake events not supported on port B */ + if (er32(STATUS) & E1000_STATUS_FUNC_1) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; + case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_FIBER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: + case E1000_DEV_ID_82571PT_QUAD_COPPER: + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* quad port adapters only support WoL on port A */ + if (!adapter->quad_port_a) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; + default: + /* dual port cards only support WoL on port A from now on + * unless it was enabled in the eeprom for port B + * so exclude FUNC_1 ports from having WoL enabled */ + if (er32(STATUS) & E1000_STATUS_FUNC_1 && + !adapter->eeprom_wol) { + wol->supported = 0; + break; + } + + retval = 0; + } + + return retval; +} + +static void e1000_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + /* this function will set ->supported = 0 and return 1 if wol is not + * supported by this hardware */ + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) + return; + + /* apply any specific unsupported masks here */ + switch (hw->device_id) { + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* KSP3 does not suppport UCAST wake-ups */ + wol->supported &= ~WAKE_UCAST; + + if (adapter->wol & E1000_WUFC_EX) + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + break; + default: + break; + } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + + return; +} + +static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + switch (hw->device_id) { + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + if (wol->wolopts & WAKE_UCAST) { + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + return -EOPNOTSUPP; + } + break; + default: + break; + } + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +/* toggle LED 4 times per second = 2 "blinks" per second */ +#define E1000_ID_INTERVAL (HZ/4) + +/* bit defines for adapter->led_status */ +#define E1000_LED_ON 0 + +static void e1000_led_blink_callback(unsigned long data) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *) data; + struct e1000_hw *hw = &adapter->hw; + + if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) + e1000_led_off(hw); + else + e1000_led_on(hw); + + mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL); +} + +static int e1000_phys_id(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (!data) + data = INT_MAX; + + if (hw->mac_type < e1000_82571) { + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long)adapter; + } + e1000_setup_led(hw); + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); + } else if (hw->phy_type == e1000_phy_ife) { + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long)adapter; + } + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); + e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0); + } else { + e1000_blink_led_start(hw); + msleep_interruptible(data * 1000); + } + + e1000_led_off(hw); + clear_bit(E1000_LED_ON, &adapter->led_status); + e1000_cleanup_led(hw); + + return 0; +} + +static int e1000_nway_reset(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + e1000_reinit_locked(adapter); + return 0; +} + +static void e1000_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + int i; + + e1000_update_stats(adapter); + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset; + data[i] = (e1000_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } +/* BUG_ON(i != E1000_STATS_LEN); */ +} + +static void e1000_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *e1000_gstrings_test, + sizeof(e1000_gstrings_test)); + break; + case ETH_SS_STATS: + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + memcpy(p, e1000_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } +/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +static const struct ethtool_ops e1000_ethtool_ops = { + .get_settings = e1000_get_settings, + .set_settings = e1000_set_settings, + .get_drvinfo = e1000_get_drvinfo, + .get_regs_len = e1000_get_regs_len, + .get_regs = e1000_get_regs, + .get_wol = e1000_get_wol, + .set_wol = e1000_set_wol, + .get_msglevel = e1000_get_msglevel, + .set_msglevel = e1000_set_msglevel, + .nway_reset = e1000_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = e1000_get_eeprom_len, + .get_eeprom = e1000_get_eeprom, + .set_eeprom = e1000_set_eeprom, + .get_ringparam = e1000_get_ringparam, + .set_ringparam = e1000_set_ringparam, + .get_pauseparam = e1000_get_pauseparam, + .set_pauseparam = e1000_set_pauseparam, + .get_rx_csum = e1000_get_rx_csum, + .set_rx_csum = e1000_set_rx_csum, + .get_tx_csum = e1000_get_tx_csum, + .set_tx_csum = e1000_set_tx_csum, + .set_sg = ethtool_op_set_sg, + .set_tso = e1000_set_tso, + .self_test = e1000_diag_test, + .get_strings = e1000_get_strings, + .phys_id = e1000_phys_id, + .get_ethtool_stats = e1000_get_ethtool_stats, + .get_sset_count = e1000_get_sset_count, +}; + +void e1000_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); +} |