rename libdde_linux26 into libdde-linux26 to make dpkg-source happy

1 files changed, 0 insertions, 189 deletions

diff --git a/libdde_linux26/contrib/include/media/v4l2-subdev.h b/libdde_linux26/contrib/include/media/v4l2-subdev.h
deleted file mode 100644
index 37b09e56..00000000
--- a/libdde_linux26/contrib/include/media/v4l2-subdev.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
-    V4L2 sub-device support header.
-
-    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _V4L2_SUBDEV_H
-#define _V4L2_SUBDEV_H
-
-#include <media/v4l2-common.h>
-
-struct v4l2_device;
-struct v4l2_subdev;
-struct tuner_setup;
-
-/* Sub-devices are devices that are connected somehow to the main bridge
-   device. These devices are usually audio/video muxers/encoders/decoders or
-   sensors and webcam controllers.
-
-   Usually these devices are controlled through an i2c bus, but other busses
-   may also be used.
-
-   The v4l2_subdev struct provides a way of accessing these devices in a
-   generic manner. Most operations that these sub-devices support fall in
-   a few categories: core ops, audio ops, video ops and tuner ops.
-
-   More categories can be added if needed, although this should remain a
-   limited set (no more than approx. 8 categories).
-
-   Each category has its own set of ops that subdev drivers can implement.
-
-   A subdev driver can leave the pointer to the category ops NULL if
-   it does not implement them (e.g. an audio subdev will generally not
-   implement the video category ops). The exception is the core category:
-   this must always be present.
-
-   These ops are all used internally so it is no problem to change, remove
-   or add ops or move ops from one to another category. Currently these
-   ops are based on the original ioctls, but since ops are not limited to
-   one argument there is room for improvement here once all i2c subdev
-   drivers are converted to use these ops.
- */
-
-/* Core ops: it is highly recommended to implement at least these ops:
-
-   g_chip_ident
-   log_status
-   g_register
-   s_register
-
-   This provides basic debugging support.
-
-   The ioctl ops is meant for generic ioctl-like commands. Depending on
-   the use-case it might be better to use subdev-specific ops (currently
-   not yet implemented) since ops provide proper type-checking.
- */
-struct v4l2_subdev_core_ops {
-	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
-	int (*log_status)(struct v4l2_subdev *sd);
-	int (*init)(struct v4l2_subdev *sd, u32 val);
-	int (*s_standby)(struct v4l2_subdev *sd, u32 standby);
-	int (*reset)(struct v4l2_subdev *sd, u32 val);
-	int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
-	int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
-	int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
-	int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
-	int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
-	long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
-	int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
-#endif
-};
-
-struct v4l2_subdev_tuner_ops {
-	int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
-	int (*s_radio)(struct v4l2_subdev *sd);
-	int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
-	int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
-	int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
-	int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
-	int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
-	int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
-	int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
-};
-
-struct v4l2_subdev_audio_ops {
-	int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
-	int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
-	int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
-};
-
-struct v4l2_subdev_video_ops {
-	int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
-	int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq);
-	int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
-	int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
-	int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
-	int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
-	int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
-	int (*s_stream)(struct v4l2_subdev *sd, int enable);
-	int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
-	int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
-};
-
-struct v4l2_subdev_ops {
-	const struct v4l2_subdev_core_ops  *core;
-	const struct v4l2_subdev_tuner_ops *tuner;
-	const struct v4l2_subdev_audio_ops *audio;
-	const struct v4l2_subdev_video_ops *video;
-};
-
-#define V4L2_SUBDEV_NAME_SIZE 32
-
-/* Each instance of a subdev driver should create this struct, either
-   stand-alone or embedded in a larger struct.
- */
-struct v4l2_subdev {
-	struct list_head list;
-	struct module *owner;
-	struct v4l2_device *dev;
-	const struct v4l2_subdev_ops *ops;
-	/* name must be unique */
-	char name[V4L2_SUBDEV_NAME_SIZE];
-	/* can be used to group similar subdevs, value is driver-specific */
-	u32 grp_id;
-	/* pointer to private data */
-	void *priv;
-};
-
-static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
-{
-	sd->priv = p;
-}
-
-static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
-{
-	return sd->priv;
-}
-
-/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call.
-   This is used by subdev modules that can be called by both old-style ioctl
-   commands and through the v4l2_subdev_ops.
-
-   The ioctl API of the subdev driver can call this function to call the
-   right ops based on the ioctl cmd and arg.
-
-   Once all subdev drivers have been converted and all drivers no longer
-   use the ioctl interface, then this function can be removed.
- */
-int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg);
-
-static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
-					const struct v4l2_subdev_ops *ops)
-{
-	INIT_LIST_HEAD(&sd->list);
-	/* ops->core MUST be set */
-	BUG_ON(!ops || !ops->core);
-	sd->ops = ops;
-	sd->dev = NULL;
-	sd->name[0] = '\0';
-	sd->grp_id = 0;
-	sd->priv = NULL;
-}
-
-/* Call an ops of a v4l2_subdev, doing the right checks against
-   NULL pointers.
-
-   Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
- */
-#define v4l2_subdev_call(sd, o, f, args...)				\
-	(!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ?	\
-		(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
-
-#endif