diff options
| author | Samuel Thibault <samuel.thibault@ens-lyon.org> | 2011-05-08 23:11:02 +0200 |
|---|---|---|
| committer | Samuel Thibault <samuel.thibault@ens-lyon.org> | 2011-05-08 23:11:02 +0200 |
| commit | cded208c7ea6d107dcbfdb2e2d4622daf41c2886 (patch) | |
| tree | a04a03736b0a928c2954382f924aadb105ee39cc /libdde_linux26/contrib/include/linux/usb | |
| parent | fc82e00ca1e174cb961dea6ad37622e9b26cd899 (diff) | |
remove .svn directories
Diffstat (limited to 'libdde_linux26/contrib/include/linux/usb')
33 files changed, 0 insertions, 6587 deletions
diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/all-wcprops b/libdde_linux26/contrib/include/linux/usb/.svn/all-wcprops deleted file mode 100644 index 5cb291e2..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/all-wcprops +++ /dev/null @@ -1,185 +0,0 @@ -K 25 -svn:wc:ra_dav:version-url -V 76 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb -END -g_printer.h -K 25 -svn:wc:ra_dav:version-url -V 88 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/g_printer.h -END -cdc.h -K 25 -svn:wc:ra_dav:version-url -V 82 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/cdc.h -END -otg.h -K 25 -svn:wc:ra_dav:version-url -V 82 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/otg.h -END -gadget.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/gadget.h -END -gpio_vbus.h -K 25 -svn:wc:ra_dav:version-url -V 88 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/gpio_vbus.h -END -input.h -K 25 -svn:wc:ra_dav:version-url -V 84 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/input.h -END -usbnet.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/usbnet.h -END -audio.h -K 25 -svn:wc:ra_dav:version-url -V 84 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/audio.h -END -composite.h -K 25 -svn:wc:ra_dav:version-url -V 88 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/composite.h -END -net2280.h -K 25 -svn:wc:ra_dav:version-url -V 86 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/net2280.h -END -musb.h -K 25 -svn:wc:ra_dav:version-url -V 83 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/musb.h -END -atmel_usba_udc.h -K 25 -svn:wc:ra_dav:version-url -V 93 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/atmel_usba_udc.h -END -sl811.h -K 25 -svn:wc:ra_dav:version-url -V 84 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/sl811.h -END -isp116x.h -K 25 -svn:wc:ra_dav:version-url -V 86 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/isp116x.h -END -association.h -K 25 -svn:wc:ra_dav:version-url -V 90 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/association.h -END -rndis_host.h -K 25 -svn:wc:ra_dav:version-url -V 89 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/rndis_host.h -END -iowarrior.h -K 25 -svn:wc:ra_dav:version-url -V 88 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/iowarrior.h -END -quirks.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/quirks.h -END -irda.h -K 25 -svn:wc:ra_dav:version-url -V 83 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/irda.h -END -serial.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/serial.h -END -wusb.h -K 25 -svn:wc:ra_dav:version-url -V 83 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/wusb.h -END -midi.h -K 25 -svn:wc:ra_dav:version-url -V 83 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/midi.h -END -ch9.h -K 25 -svn:wc:ra_dav:version-url -V 82 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/ch9.h -END -tmc.h -K 25 -svn:wc:ra_dav:version-url -V 82 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/tmc.h -END -gadgetfs.h -K 25 -svn:wc:ra_dav:version-url -V 87 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/gadgetfs.h -END -Kbuild -K 25 -svn:wc:ra_dav:version-url -V 83 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/Kbuild -END -wusb-wa.h -K 25 -svn:wc:ra_dav:version-url -V 86 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/wusb-wa.h -END -ehci_def.h -K 25 -svn:wc:ra_dav:version-url -V 87 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/ehci_def.h -END -vstusb.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/vstusb.h -END -c67x00.h -K 25 -svn:wc:ra_dav:version-url -V 85 -/repos/tudos/!svn/ver/455/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb/c67x00.h -END diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/entries b/libdde_linux26/contrib/include/linux/usb/.svn/entries deleted file mode 100644 index a274c739..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/entries +++ /dev/null @@ -1,1048 +0,0 @@ -9 - -dir -465 -http://svn.tudos.org/repos/tudos/trunk/l4/pkg/dde/linux26/contrib/include/linux/usb -http://svn.tudos.org/repos/tudos - - - -2009-05-20T14:32:55.606606Z -455 -l4check - - -svn:special svn:externals svn:needs-lock - - - - - - - - - - - -a704ac0b-3a55-4d43-a2a9-7be6f07c34fb - -g_printer.h -file - - - - -2009-11-15T17:15:34.000000Z -8bb08ad66ed43be82f5e9bc1975bbe39 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1321 - -cdc.h -file - - - - -2009-11-15T17:15:34.000000Z -1663ab03e377247bd5fdbbe4de1ee4e6 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -7033 - -otg.h -file - - - - -2009-11-15T17:15:34.000000Z -df68e784eb908806666ed2c110538de7 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -3287 - -gadget.h -file - - - - -2009-11-15T17:15:34.000000Z -6d50607f1028c6b7d06288808189d3fc -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -35033 - -gpio_vbus.h -file - - - - -2009-11-15T17:15:34.000000Z -ee369c74ec6b6a6beb7fabc1770e630a -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1051 - -input.h -file - - - - -2009-11-15T17:15:34.000000Z -93fd76709713132e9ff4b97f662adebf -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -680 - -usbnet.h -file - - - - -2009-11-15T17:15:34.000000Z -cd7b8128c4015c028b60cd6f88ab6d13 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -7165 - -audio.h -file - - - - -2009-11-15T17:15:34.000000Z -7096a9c57858a513ccb3196c4675f1f2 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1702 - -composite.h -file - - - - -2009-11-15T17:15:34.000000Z -161505ac0abdb7b9fc16f173e44043f2 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -14611 - -net2280.h -file - - - - -2009-11-15T17:15:34.000000Z -3692197db6fbb01e874a8a013afc1f5e -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -23971 - -musb.h -file - - - - -2009-11-15T17:15:34.000000Z -e09cc2e682eacca4b279c4fffa0fe7a8 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -3100 - -atmel_usba_udc.h -file - - - - -2009-11-15T17:15:34.000000Z -0df1f5d81cd7ff6da3db205807abf14b -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -356 - -sl811.h -file - - - - -2009-11-15T17:15:34.000000Z -814536138c148c2b874e560f9c00f894 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -799 - -isp116x.h -file - - - - -2009-11-15T17:15:34.000000Z -167bddf12e4c5cb14ea097f1fb14688a -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1121 - -rndis_host.h -file - - - - -2009-11-15T17:15:34.000000Z -0c6c38156a118a1dcaf90dcaa5bb03b6 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -8873 - -association.h -file - - - - -2009-11-15T17:15:34.000000Z -79b593d8fb8929f86bb9ef30fc103b5d -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -4661 - -iowarrior.h -file - - - - -2009-11-15T17:15:34.000000Z -7a4e38f1e7002c7c06a72cb7efe00dfc -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1335 - -quirks.h -file - - - - -2009-11-15T17:15:34.000000Z -281f5a716369094214d42d1f827cb120 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -553 - -irda.h -file - - - - -2009-11-15T17:15:34.000000Z -f48bfbc2ab734074669f3f62d3c92129 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -3515 - -serial.h -file - - - - -2009-11-15T17:15:34.000000Z -1f2040e97bd5b648f6326ee945281552 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -12916 - -wusb.h -file - - - - -2009-11-15T17:15:34.000000Z -086ddeacd4cc3081868e3a7677db4da3 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -10050 - -midi.h -file - - - - -2009-11-15T17:15:34.000000Z -09f951b0824c3f951e16eae380467fca -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -3372 - -ch9.h -file - - - - -2009-11-15T17:15:34.000000Z -a35bd32699140c03730857acefb1da13 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -19008 - -tmc.h -file - - - - -2009-11-15T17:15:34.000000Z -1115fd4c7af53a54f57a913c54333a0a -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1591 - -gadgetfs.h -file - - - - -2009-11-15T17:15:34.000000Z -78f6e7aeb8e571e9bebd2f67d785bfdb -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -2753 - -Kbuild -file - - - - -2009-11-15T17:15:34.000000Z -dcdb2eb4553b9ed9d5102392333f371b -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -161 - -wusb-wa.h -file - - - - -2009-11-15T17:15:34.000000Z -be99202032cd9895c461e36b5c97999d -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -7168 - -ehci_def.h -file - - - - -2009-11-15T17:15:34.000000Z -1d7b01a953316c4107836df7f1f07810 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -6536 - -vstusb.h -file - - - - -2009-11-15T17:15:34.000000Z -498a23e5ca9ead126ee3d82148159f25 -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -2494 - -c67x00.h -file - - - - -2009-11-15T17:15:34.000000Z -15184bc46e91a59160aa02cecf28f77b -2009-05-20T14:32:55.606606Z -455 -l4check - - - - - - - - - - - - - - - - - - - - - -1830 - diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/format b/libdde_linux26/contrib/include/linux/usb/.svn/format deleted file mode 100644 index ec635144..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/format +++ /dev/null @@ -1 +0,0 @@ -9 diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/Kbuild.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/Kbuild.svn-base deleted file mode 100644 index 54c44630..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/Kbuild.svn-base +++ /dev/null @@ -1,8 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += vstusb.h diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/association.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/association.h.svn-base deleted file mode 100644 index 0a4a18b3..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/association.h.svn-base +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Wireless USB - Cable Based Association - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - */ -#ifndef __LINUX_USB_ASSOCIATION_H -#define __LINUX_USB_ASSOCIATION_H - - -/* - * Association attributes - * - * Association Models Supplement to WUSB 1.0 T[3-1] - * - * Each field in the structures has it's ID, it's length and then the - * value. This is the actual definition of the field's ID and its - * length. - */ -struct wusb_am_attr { - __u8 id; - __u8 len; -}; - -/* Different fields defined by the spec */ -#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) } -#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) } -#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) } -#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) } -#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) } -#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */ -#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */ -#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) } -#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) } -#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) } -#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) } - -/* CBAF Control Requests (AMS1.0[T4-1] */ -enum { - CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01, - CBAF_REQ_GET_ASSOCIATION_REQUEST, - CBAF_REQ_SET_ASSOCIATION_RESPONSE -}; - -/* - * CBAF USB-interface defitions - * - * No altsettings, one optional interrupt endpoint. - */ -enum { - CBAF_IFACECLASS = 0xef, - CBAF_IFACESUBCLASS = 0x03, - CBAF_IFACEPROTOCOL = 0x01, -}; - -/* Association Information (AMS1.0[T4-3]) */ -struct wusb_cbaf_assoc_info { - __le16 Length; - __u8 NumAssociationRequests; - __le16 Flags; - __u8 AssociationRequestsArray[]; -} __attribute__((packed)); - -/* Association Request (AMS1.0[T4-4]) */ -struct wusb_cbaf_assoc_request { - __u8 AssociationDataIndex; - __u8 Reserved; - __le16 AssociationTypeId; - __le16 AssociationSubTypeId; - __le32 AssociationTypeInfoSize; -} __attribute__((packed)); - -enum { - AR_TYPE_WUSB = 0x0001, - AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000, - AR_TYPE_WUSB_ASSOCIATE = 0x0001, -}; - -/* Association Attribute header (AMS1.0[3.8]) */ -struct wusb_cbaf_attr_hdr { - __le16 id; - __le16 len; -} __attribute__((packed)); - -/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */ -struct wusb_cbaf_host_info { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr CHID_hdr; - struct wusb_ckhdid CHID; - struct wusb_cbaf_attr_hdr LangID_hdr; - __le16 LangID; - struct wusb_cbaf_attr_hdr HostFriendlyName_hdr; - __u8 HostFriendlyName[]; -} __attribute__((packed)); - -/* Device Info (AMS1.0[T4-8]) - * - * I still don't get this tag'n'header stuff for each goddamn - * field... - */ -struct wusb_cbaf_device_info { - struct wusb_cbaf_attr_hdr Length_hdr; - __le32 Length; - struct wusb_cbaf_attr_hdr CDID_hdr; - struct wusb_ckhdid CDID; - struct wusb_cbaf_attr_hdr BandGroups_hdr; - __le16 BandGroups; - struct wusb_cbaf_attr_hdr LangID_hdr; - __le16 LangID; - struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr; - __u8 DeviceFriendlyName[]; -} __attribute__((packed)); - -/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */ -struct wusb_cbaf_cc_data { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr Length_hdr; - __le32 Length; - struct wusb_cbaf_attr_hdr ConnectionContext_hdr; - struct wusb_ckhdid CHID; - struct wusb_ckhdid CDID; - struct wusb_ckhdid CK; - struct wusb_cbaf_attr_hdr BandGroups_hdr; - __le16 BandGroups; -} __attribute__((packed)); - -/* CC_DATA - Failure case (AMS1.0[T4-10]) */ -struct wusb_cbaf_cc_data_fail { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr Length_hdr; - __le16 Length; - struct wusb_cbaf_attr_hdr AssociationStatus_hdr; - __u32 AssociationStatus; -} __attribute__((packed)); - -#endif /* __LINUX_USB_ASSOCIATION_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/atmel_usba_udc.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/atmel_usba_udc.h.svn-base deleted file mode 100644 index 6311fa2d..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/atmel_usba_udc.h.svn-base +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Platform data definitions for Atmel USBA gadget driver. - */ -#ifndef __LINUX_USB_USBA_H -#define __LINUX_USB_USBA_H - -struct usba_ep_data { - char *name; - int index; - int fifo_size; - int nr_banks; - int can_dma; - int can_isoc; -}; - -struct usba_platform_data { - int vbus_pin; - int num_ep; - struct usba_ep_data ep[0]; -}; - -#endif /* __LINUX_USB_USBA_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/audio.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/audio.h.svn-base deleted file mode 100644 index 8cb025fe..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/audio.h.svn-base +++ /dev/null @@ -1,53 +0,0 @@ -/* - * <linux/usb/audio.h> -- USB Audio definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson <ben.williamson@greyinnovation.com> - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for Audio Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/audio10.pdf - */ - -#ifndef __LINUX_USB_AUDIO_H -#define __LINUX_USB_AUDIO_H - -#include <linux/types.h> - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct usb_ac_header_descriptor { - __u8 bLength; /* 8+n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_AC_HEADER_SIZE(n) (8+(n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \ -struct usb_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_AUDIO_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/c67x00.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/c67x00.h.svn-base deleted file mode 100644 index 83c6b454..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/c67x00.h.svn-base +++ /dev/null @@ -1,48 +0,0 @@ -/* - * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip - * - * Copyright (C) 2006-2008 Barco N.V. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. - */ - -#ifndef _LINUX_USB_C67X00_H -#define _LINUX_USB_C67X00_H - -/* SIE configuration */ -#define C67X00_SIE_UNUSED 0 -#define C67X00_SIE_HOST 1 -#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */ -#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */ - -#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3) - -#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0) -#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0) -#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0) -#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0) - -#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4) -#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4) -#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4) -#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4) - -struct c67x00_platform_data { - int sie_config; /* SIEs config (C67X00_SIEx_*) */ - unsigned long hpi_regstep; /* Step between HPI registers */ -}; - -#endif /* _LINUX_USB_C67X00_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/cdc.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/cdc.h.svn-base deleted file mode 100644 index 3c86ed25..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/cdc.h.svn-base +++ /dev/null @@ -1,247 +0,0 @@ -/* - * USB Communications Device Class (CDC) definitions - * - * CDC says how to talk to lots of different types of network adapters, - * notably ethernet adapters and various modems. It's used mostly with - * firmware based USB peripherals. - */ - -#ifndef __LINUX_USB_CDC_H -#define __LINUX_USB_CDC_H - -#include <linux/types.h> - -#define USB_CDC_SUBCLASS_ACM 0x02 -#define USB_CDC_SUBCLASS_ETHERNET 0x06 -#define USB_CDC_SUBCLASS_WHCM 0x08 -#define USB_CDC_SUBCLASS_DMM 0x09 -#define USB_CDC_SUBCLASS_MDLM 0x0a -#define USB_CDC_SUBCLASS_OBEX 0x0b - -#define USB_CDC_PROTO_NONE 0 - -#define USB_CDC_ACM_PROTO_AT_V25TER 1 -#define USB_CDC_ACM_PROTO_AT_PCCA101 2 -#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 -#define USB_CDC_ACM_PROTO_AT_GSM 4 -#define USB_CDC_ACM_PROTO_AT_3G 5 -#define USB_CDC_ACM_PROTO_AT_CDMA 6 -#define USB_CDC_ACM_PROTO_VENDOR 0xff - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific descriptors ... there are a couple dozen of them - */ - -#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ -#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ -#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ -#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ -#define USB_CDC_COUNTRY_TYPE 0x07 -#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ -#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ -#define USB_CDC_WHCM_TYPE 0x11 -#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ -#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ -#define USB_CDC_DMM_TYPE 0x14 -#define USB_CDC_OBEX_TYPE 0x15 - -/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ -struct usb_cdc_header_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdCDC; -} __attribute__ ((packed)); - -/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ -struct usb_cdc_call_mgmt_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 -#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 - - __u8 bDataInterface; -} __attribute__ ((packed)); - -/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ -struct usb_cdc_acm_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -} __attribute__ ((packed)); - -/* capabilities from 5.2.3.3 */ - -#define USB_CDC_COMM_FEATURE 0x01 -#define USB_CDC_CAP_LINE 0x02 -#define USB_CDC_CAP_BRK 0x04 -#define USB_CDC_CAP_NOTIFY 0x08 - -/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ -struct usb_cdc_union_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bMasterInterface0; - __u8 bSlaveInterface0; - /* ... and there could be other slave interfaces */ -} __attribute__ ((packed)); - -/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ -struct usb_cdc_country_functional_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iCountryCodeRelDate; - __le16 wCountyCode0; - /* ... and there can be a lot of country codes */ -} __attribute__ ((packed)); - -/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ -struct usb_cdc_network_terminal_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bEntityId; - __u8 iName; - __u8 bChannelIndex; - __u8 bPhysicalInterface; -} __attribute__ ((packed)); - -/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ -struct usb_cdc_ether_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iMACAddress; - __le32 bmEthernetStatistics; - __le16 wMaxSegmentSize; - __le16 wNumberMCFilters; - __u8 bNumberPowerFilters; -} __attribute__ ((packed)); - -/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ -struct usb_cdc_dmm_desc { - __u8 bFunctionLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u16 bcdVersion; - __le16 wMaxCommand; -} __attribute__ ((packed)); - -/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ -struct usb_cdc_mdlm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; - __u8 bGUID[16]; -} __attribute__ ((packed)); - -/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ -struct usb_cdc_mdlm_detail_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - /* type is associated with mdlm_desc.bGUID */ - __u8 bGuidDescriptorType; - __u8 bDetailData[0]; -} __attribute__ ((packed)); - -/* "OBEX Control Model Functional Descriptor" */ -struct usb_cdc_obex_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Control Requests (6.2) - * - * section 3.6.2.1 table 4 has the ACM profile, for modems. - * section 3.8.2 table 10 has the ethernet profile. - * - * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, - * heavily dependent on the encapsulated (proprietary) command mechanism. - */ - -#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 -#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 -#define USB_CDC_REQ_SET_LINE_CODING 0x20 -#define USB_CDC_REQ_GET_LINE_CODING 0x21 -#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 -#define USB_CDC_REQ_SEND_BREAK 0x23 -#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 -#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 -#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 -#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 -#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 - -/* Line Coding Structure from CDC spec 6.2.13 */ -struct usb_cdc_line_coding { - __le32 dwDTERate; - __u8 bCharFormat; -#define USB_CDC_1_STOP_BITS 0 -#define USB_CDC_1_5_STOP_BITS 1 -#define USB_CDC_2_STOP_BITS 2 - - __u8 bParityType; -#define USB_CDC_NO_PARITY 0 -#define USB_CDC_ODD_PARITY 1 -#define USB_CDC_EVEN_PARITY 2 -#define USB_CDC_MARK_PARITY 3 -#define USB_CDC_SPACE_PARITY 4 - - __u8 bDataBits; -} __attribute__ ((packed)); - -/* table 62; bits in multicast filter */ -#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) -#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ -#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) -#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) -#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Notifications (6.3) sent by interrupt transfers - * - * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications - * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS - * RNDIS also defines its own bit-incompatible notifications - */ - -#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 -#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 -#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 -#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a - -struct usb_cdc_notification { - __u8 bmRequestType; - __u8 bNotificationType; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -#endif /* __LINUX_USB_CDC_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ch9.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ch9.h.svn-base deleted file mode 100644 index 9b42baed..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ch9.h.svn-base +++ /dev/null @@ -1,603 +0,0 @@ -/* - * This file holds USB constants and structures that are needed for - * USB device APIs. These are used by the USB device model, which is - * defined in chapter 9 of the USB 2.0 specification and in the - * Wireless USB 1.0 (spread around). Linux has several APIs in C that - * need these: - * - * - the master/host side Linux-USB kernel driver API; - * - the "usbfs" user space API; and - * - the Linux "gadget" slave/device/peripheral side driver API. - * - * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems - * act either as a USB master/host or as a USB slave/device. That means - * the master and slave side APIs benefit from working well together. - * - * There's also "Wireless USB", using low power short range radios for - * peripheral interconnection but otherwise building on the USB framework. - * - * Note all descriptors are declared '__attribute__((packed))' so that: - * - * [a] they never get padded, either internally (USB spec writers - * probably handled that) or externally; - * - * [b] so that accessing bigger-than-a-bytes fields will never - * generate bus errors on any platform, even when the location of - * its descriptor inside a bundle isn't "naturally aligned", and - * - * [c] for consistency, removing all doubt even when it appears to - * someone that the two other points are non-issues for that - * particular descriptor type. - */ - -#ifndef __LINUX_USB_CH9_H -#define __LINUX_USB_CH9_H - -#include <linux/types.h> /* __u8 etc */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ -}; - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -#endif /* __LINUX_USB_CH9_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/composite.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/composite.h.svn-base deleted file mode 100644 index 935c380f..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/composite.h.svn-base +++ /dev/null @@ -1,345 +0,0 @@ -/* - * composite.h -- framework for usb gadgets which are composite devices - * - * Copyright (C) 2006-2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __LINUX_USB_COMPOSITE_H -#define __LINUX_USB_COMPOSITE_H - -/* - * This framework is an optional layer on top of the USB Gadget interface, - * making it easier to build (a) Composite devices, supporting multiple - * functions within any single configuration, and (b) Multi-configuration - * devices, also supporting multiple functions but without necessarily - * having more than one function per configuration. - * - * Example: a device with a single configuration supporting both network - * link and mass storage functions is a composite device. Those functions - * might alternatively be packaged in individual configurations, but in - * the composite model the host can use both functions at the same time. - */ - -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> - - -struct usb_configuration; - -/** - * struct usb_function - describes one function of a configuration - * @name: For diagnostics, identifies the function. - * @strings: tables of strings, keyed by identifiers assigned during bind() - * and by language IDs provided in control requests - * @descriptors: Table of full (or low) speed descriptors, using interface and - * string identifiers assigned during @bind(). If this pointer is null, - * the function will not be available at full speed (or at low speed). - * @hs_descriptors: Table of high speed descriptors, using interface and - * string identifiers assigned during @bind(). If this pointer is null, - * the function will not be available at high speed. - * @config: assigned when @usb_add_function() is called; this is the - * configuration with which this function is associated. - * @bind: Before the gadget can register, all of its functions bind() to the - * available resources including string and interface identifiers used - * in interface or class descriptors; endpoints; I/O buffers; and so on. - * @unbind: Reverses @bind; called as a side effect of unregistering the - * driver which added this function. - * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may - * initialize usb_ep.driver data at this time (when it is used). - * Note that setting an interface to its current altsetting resets - * interface state, and that all interfaces have a disabled state. - * @get_alt: Returns the active altsetting. If this is not provided, - * then only altsetting zero is supported. - * @disable: (REQUIRED) Indicates the function should be disabled. Reasons - * include host resetting or reconfiguring the gadget, and disconnection. - * @setup: Used for interface-specific control requests. - * @suspend: Notifies functions when the host stops sending USB traffic. - * @resume: Notifies functions when the host restarts USB traffic. - * - * A single USB function uses one or more interfaces, and should in most - * cases support operation at both full and high speeds. Each function is - * associated by @usb_add_function() with a one configuration; that function - * causes @bind() to be called so resources can be allocated as part of - * setting up a gadget driver. Those resources include endpoints, which - * should be allocated using @usb_ep_autoconfig(). - * - * To support dual speed operation, a function driver provides descriptors - * for both high and full speed operation. Except in rare cases that don't - * involve bulk endpoints, each speed needs different endpoint descriptors. - * - * Function drivers choose their own strategies for managing instance data. - * The simplest strategy just declares it "static', which means the function - * can only be activated once. If the function needs to be exposed in more - * than one configuration at a given speed, it needs to support multiple - * usb_function structures (one for each configuration). - * - * A more complex strategy might encapsulate a @usb_function structure inside - * a driver-specific instance structure to allows multiple activations. An - * example of multiple activations might be a CDC ACM function that supports - * two or more distinct instances within the same configuration, providing - * several independent logical data links to a USB host. - */ -struct usb_function { - const char *name; - struct usb_gadget_strings **strings; - struct usb_descriptor_header **descriptors; - struct usb_descriptor_header **hs_descriptors; - - struct usb_configuration *config; - - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching. - * Related: unbind() may kfree() but bind() won't... - */ - - /* configuration management: bind/unbind */ - int (*bind)(struct usb_configuration *, - struct usb_function *); - void (*unbind)(struct usb_configuration *, - struct usb_function *); - - /* runtime state management */ - int (*set_alt)(struct usb_function *, - unsigned interface, unsigned alt); - int (*get_alt)(struct usb_function *, - unsigned interface); - void (*disable)(struct usb_function *); - int (*setup)(struct usb_function *, - const struct usb_ctrlrequest *); - void (*suspend)(struct usb_function *); - void (*resume)(struct usb_function *); - - /* internals */ - struct list_head list; -}; - -int usb_add_function(struct usb_configuration *, struct usb_function *); - -int usb_function_deactivate(struct usb_function *); -int usb_function_activate(struct usb_function *); - -int usb_interface_id(struct usb_configuration *, struct usb_function *); - -/** - * ep_choose - select descriptor endpoint at current device speed - * @g: gadget, connected and running at some speed - * @hs: descriptor to use for high speed operation - * @fs: descriptor to use for full or low speed operation - */ -static inline struct usb_endpoint_descriptor * -ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, - struct usb_endpoint_descriptor *fs) -{ - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) - return hs; - return fs; -} - -#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ - -/** - * struct usb_configuration - represents one gadget configuration - * @label: For diagnostics, describes the configuration. - * @strings: Tables of strings, keyed by identifiers assigned during @bind() - * and by language IDs provided in control requests. - * @descriptors: Table of descriptors preceding all function descriptors. - * Examples include OTG and vendor-specific descriptors. - * @bind: Called from @usb_add_config() to allocate resources unique to this - * configuration and to call @usb_add_function() for each function used. - * @unbind: Reverses @bind; called as a side effect of unregistering the - * driver which added this configuration. - * @setup: Used to delegate control requests that aren't handled by standard - * device infrastructure or directed at a specific interface. - * @bConfigurationValue: Copied into configuration descriptor. - * @iConfiguration: Copied into configuration descriptor. - * @bmAttributes: Copied into configuration descriptor. - * @bMaxPower: Copied into configuration descriptor. - * @cdev: assigned by @usb_add_config() before calling @bind(); this is - * the device associated with this configuration. - * - * Configurations are building blocks for gadget drivers structured around - * function drivers. Simple USB gadgets require only one function and one - * configuration, and handle dual-speed hardware by always providing the same - * functionality. Slightly more complex gadgets may have more than one - * single-function configuration at a given speed; or have configurations - * that only work at one speed. - * - * Composite devices are, by definition, ones with configurations which - * include more than one function. - * - * The lifecycle of a usb_configuration includes allocation, initialization - * of the fields described above, and calling @usb_add_config() to set up - * internal data and bind it to a specific device. The configuration's - * @bind() method is then used to initialize all the functions and then - * call @usb_add_function() for them. - * - * Those functions would normally be independant of each other, but that's - * not mandatory. CDC WMC devices are an example where functions often - * depend on other functions, with some functions subsidiary to others. - * Such interdependency may be managed in any way, so long as all of the - * descriptors complete by the time the composite driver returns from - * its bind() routine. - */ -struct usb_configuration { - const char *label; - struct usb_gadget_strings **strings; - const struct usb_descriptor_header **descriptors; - - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching... - */ - - /* configuration management: bind/unbind */ - int (*bind)(struct usb_configuration *); - void (*unbind)(struct usb_configuration *); - int (*setup)(struct usb_configuration *, - const struct usb_ctrlrequest *); - - /* fields in the config descriptor */ - u8 bConfigurationValue; - u8 iConfiguration; - u8 bmAttributes; - u8 bMaxPower; - - struct usb_composite_dev *cdev; - - /* internals */ - struct list_head list; - struct list_head functions; - u8 next_interface_id; - unsigned highspeed:1; - unsigned fullspeed:1; - struct usb_function *interface[MAX_CONFIG_INTERFACES]; -}; - -int usb_add_config(struct usb_composite_dev *, - struct usb_configuration *); - -/** - * struct usb_composite_driver - groups configurations into a gadget - * @name: For diagnostics, identifies the driver. - * @dev: Template descriptor for the device, including default device - * identifiers. - * @strings: tables of strings, keyed by identifiers assigned during bind() - * and language IDs provided in control requests - * @bind: (REQUIRED) Used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. - * @unbind: Reverses @bind(); called as a side effect of unregistering - * this driver. - * - * Devices default to reporting self powered operation. Devices which rely - * on bus powered operation should report this in their @bind() method. - * - * Before returning from @bind, various fields in the template descriptor - * may be overridden. These include the idVendor/idProduct/bcdDevice values - * normally to bind the appropriate host side driver, and the three strings - * (iManufacturer, iProduct, iSerialNumber) normally used to provide user - * meaningful device identifiers. (The strings will not be defined unless - * they are defined in @dev and @strings.) The correct ep0 maxpacket size - * is also reported, as defined by the underlying controller driver. - */ -struct usb_composite_driver { - const char *name; - const struct usb_device_descriptor *dev; - struct usb_gadget_strings **strings; - - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching... - */ - - int (*bind)(struct usb_composite_dev *); - int (*unbind)(struct usb_composite_dev *); -}; - -extern int usb_composite_register(struct usb_composite_driver *); -extern void usb_composite_unregister(struct usb_composite_driver *); - - -/** - * struct usb_composite_device - represents one composite usb gadget - * @gadget: read-only, abstracts the gadget's usb peripheral controller - * @req: used for control responses; buffer is pre-allocated - * @bufsiz: size of buffer pre-allocated in @req - * @config: the currently active configuration - * - * One of these devices is allocated and initialized before the - * associated device driver's bind() is called. - * - * OPEN ISSUE: it appears that some WUSB devices will need to be - * built by combining a normal (wired) gadget with a wireless one. - * This revision of the gadget framework should probably try to make - * sure doing that won't hurt too much. - * - * One notion for how to handle Wireless USB devices involves: - * (a) a second gadget here, discovery mechanism TBD, but likely - * needing separate "register/unregister WUSB gadget" calls; - * (b) updates to usb_gadget to include flags "is it wireless", - * "is it wired", plus (presumably in a wrapper structure) - * bandgroup and PHY info; - * (c) presumably a wireless_ep wrapping a usb_ep, and reporting - * wireless-specific parameters like maxburst and maxsequence; - * (d) configurations that are specific to wireless links; - * (e) function drivers that understand wireless configs and will - * support wireless for (additional) function instances; - * (f) a function to support association setup (like CBAF), not - * necessarily requiring a wireless adapter; - * (g) composite device setup that can create one or more wireless - * configs, including appropriate association setup support; - * (h) more, TBD. - */ -struct usb_composite_dev { - struct usb_gadget *gadget; - struct usb_request *req; - unsigned bufsiz; - - struct usb_configuration *config; - - /* internals */ - struct usb_device_descriptor desc; - struct list_head configs; - struct usb_composite_driver *driver; - u8 next_string_id; - - /* the gadget driver won't enable the data pullup - * while the deactivation count is nonzero. - */ - unsigned deactivations; - - /* protects at least deactivation count */ - spinlock_t lock; -}; - -extern int usb_string_id(struct usb_composite_dev *c); - -/* messaging utils */ -#define DBG(d, fmt, args...) \ - dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) \ - dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) \ - dev_err(&(d)->gadget->dev , fmt , ## args) -#define WARNING(d, fmt, args...) \ - dev_warn(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) \ - dev_info(&(d)->gadget->dev , fmt , ## args) - -#endif /* __LINUX_USB_COMPOSITE_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ehci_def.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ehci_def.h.svn-base deleted file mode 100644 index 5b88e36c..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/ehci_def.h.svn-base +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (c) 2001-2002 by David Brownell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_USB_EHCI_DEF_H -#define __LINUX_USB_EHCI_DEF_H - -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute [8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved [9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status [0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -#define USBMODE 0x68 /* USB Device mode */ -#define USBMODE_SDIS (1<<3) /* Stream disable */ -#define USBMODE_BE (1<<2) /* BE/LE endianness select */ -#define USBMODE_CM_HC (3<<0) /* host controller mode */ -#define USBMODE_CM_IDLE (0<<0) /* idle state */ - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); - -#endif /* __LINUX_USB_EHCI_DEF_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/g_printer.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/g_printer.h.svn-base deleted file mode 100644 index 6178fde5..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/g_printer.h.svn-base +++ /dev/null @@ -1,35 +0,0 @@ -/* - * g_printer.h -- Header file for USB Printer gadget driver - * - * Copyright (C) 2007 Craig W. Nadler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_G_PRINTER_H -#define __LINUX_USB_G_PRINTER_H - -#define PRINTER_NOT_ERROR 0x08 -#define PRINTER_SELECTED 0x10 -#define PRINTER_PAPER_EMPTY 0x20 - -/* The 'g' code is also used by gadgetfs ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ -#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) -#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) - -#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadget.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadget.h.svn-base deleted file mode 100644 index 0460a746..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadget.h.svn-base +++ /dev/null @@ -1,893 +0,0 @@ -/* - * <linux/usb/gadget.h> - * - * We call the USB code inside a Linux-based peripheral device a "gadget" - * driver, except for the hardware-specific bus glue. One USB host can - * master many USB gadgets, but the gadgets are only slaved to one host. - * - * - * (C) Copyright 2002-2004 by David Brownell - * All Rights Reserved. - * - * This software is licensed under the GNU GPL version 2. - */ - -#ifndef __LINUX_USB_GADGET_H -#define __LINUX_USB_GADGET_H - -struct usb_ep; - -/** - * struct usb_request - describes one i/o request - * @buf: Buffer used for data. Always provide this; some controllers - * only use PIO, or don't use DMA for some endpoints. - * @dma: DMA address corresponding to 'buf'. If you don't set this - * field, and the usb controller needs one, it is responsible - * for mapping and unmapping the buffer. - * @length: Length of that data - * @no_interrupt: If true, hints that no completion irq is needed. - * Helpful sometimes with deep request queues that are handled - * directly by DMA controllers. - * @zero: If true, when writing data, makes the last packet be "short" - * by adding a zero length packet as needed; - * @short_not_ok: When reading data, makes short packets be - * treated as errors (queue stops advancing till cleanup). - * @complete: Function called when request completes, so this request and - * its buffer may be re-used. The function will always be called with - * interrupts disabled, and it must not sleep. - * Reads terminate with a short packet, or when the buffer fills, - * whichever comes first. When writes terminate, some data bytes - * will usually still be in flight (often in a hardware fifo). - * Errors (for reads or writes) stop the queue from advancing - * until the completion function returns, so that any transfers - * invalidated by the error may first be dequeued. - * @context: For use by the completion callback - * @list: For use by the gadget driver. - * @status: Reports completion code, zero or a negative errno. - * Normally, faults block the transfer queue from advancing until - * the completion callback returns. - * Code "-ESHUTDOWN" indicates completion caused by device disconnect, - * or when the driver disabled the endpoint. - * @actual: Reports bytes transferred to/from the buffer. For reads (OUT - * transfers) this may be less than the requested length. If the - * short_not_ok flag is set, short reads are treated as errors - * even when status otherwise indicates successful completion. - * Note that for writes (IN transfers) some data bytes may still - * reside in a device-side FIFO when the request is reported as - * complete. - * - * These are allocated/freed through the endpoint they're used with. The - * hardware's driver can add extra per-request data to the memory it returns, - * which often avoids separate memory allocations (potential failures), - * later when the request is queued. - * - * Request flags affect request handling, such as whether a zero length - * packet is written (the "zero" flag), whether a short read should be - * treated as an error (blocking request queue advance, the "short_not_ok" - * flag), or hinting that an interrupt is not required (the "no_interrupt" - * flag, for use with deep request queues). - * - * Bulk endpoints can use any size buffers, and can also be used for interrupt - * transfers. interrupt-only endpoints can be much less functional. - * - * NOTE: this is analagous to 'struct urb' on the host side, except that - * it's thinner and promotes more pre-allocation. - */ - -struct usb_request { - void *buf; - unsigned length; - dma_addr_t dma; - - unsigned no_interrupt:1; - unsigned zero:1; - unsigned short_not_ok:1; - - void (*complete)(struct usb_ep *ep, - struct usb_request *req); - void *context; - struct list_head list; - - int status; - unsigned actual; -}; - -/*-------------------------------------------------------------------------*/ - -/* endpoint-specific parts of the api to the usb controller hardware. - * unlike the urb model, (de)multiplexing layers are not required. - * (so this api could slash overhead if used on the host side...) - * - * note that device side usb controllers commonly differ in how many - * endpoints they support, as well as their capabilities. - */ -struct usb_ep_ops { - int (*enable) (struct usb_ep *ep, - const struct usb_endpoint_descriptor *desc); - int (*disable) (struct usb_ep *ep); - - struct usb_request *(*alloc_request) (struct usb_ep *ep, - gfp_t gfp_flags); - void (*free_request) (struct usb_ep *ep, struct usb_request *req); - - int (*queue) (struct usb_ep *ep, struct usb_request *req, - gfp_t gfp_flags); - int (*dequeue) (struct usb_ep *ep, struct usb_request *req); - - int (*set_halt) (struct usb_ep *ep, int value); - int (*set_wedge) (struct usb_ep *ep); - - int (*fifo_status) (struct usb_ep *ep); - void (*fifo_flush) (struct usb_ep *ep); -}; - -/** - * struct usb_ep - device side representation of USB endpoint - * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk" - * @ops: Function pointers used to access hardware-specific operations. - * @ep_list:the gadget's ep_list holds all of its endpoints - * @maxpacket:The maximum packet size used on this endpoint. The initial - * value can sometimes be reduced (hardware allowing), according to - * the endpoint descriptor used to configure the endpoint. - * @driver_data:for use by the gadget driver. all other fields are - * read-only to gadget drivers. - * - * the bus controller driver lists all the general purpose endpoints in - * gadget->ep_list. the control endpoint (gadget->ep0) is not in that list, - * and is accessed only in response to a driver setup() callback. - */ -struct usb_ep { - void *driver_data; - - const char *name; - const struct usb_ep_ops *ops; - struct list_head ep_list; - unsigned maxpacket:16; -}; - -/*-------------------------------------------------------------------------*/ - -/** - * usb_ep_enable - configure endpoint, making it usable - * @ep:the endpoint being configured. may not be the endpoint named "ep0". - * drivers discover endpoints through the ep_list of a usb_gadget. - * @desc:descriptor for desired behavior. caller guarantees this pointer - * remains valid until the endpoint is disabled; the data byte order - * is little-endian (usb-standard). - * - * when configurations are set, or when interface settings change, the driver - * will enable or disable the relevant endpoints. while it is enabled, an - * endpoint may be used for i/o until the driver receives a disconnect() from - * the host or until the endpoint is disabled. - * - * the ep0 implementation (which calls this routine) must ensure that the - * hardware capabilities of each endpoint match the descriptor provided - * for it. for example, an endpoint named "ep2in-bulk" would be usable - * for interrupt transfers as well as bulk, but it likely couldn't be used - * for iso transfers or for endpoint 14. some endpoints are fully - * configurable, with more generic names like "ep-a". (remember that for - * USB, "in" means "towards the USB master".) - * - * returns zero, or a negative error code. - */ -static inline int usb_ep_enable(struct usb_ep *ep, - const struct usb_endpoint_descriptor *desc) -{ - return ep->ops->enable(ep, desc); -} - -/** - * usb_ep_disable - endpoint is no longer usable - * @ep:the endpoint being unconfigured. may not be the endpoint named "ep0". - * - * no other task may be using this endpoint when this is called. - * any pending and uncompleted requests will complete with status - * indicating disconnect (-ESHUTDOWN) before this call returns. - * gadget drivers must call usb_ep_enable() again before queueing - * requests to the endpoint. - * - * returns zero, or a negative error code. - */ -static inline int usb_ep_disable(struct usb_ep *ep) -{ - return ep->ops->disable(ep); -} - -/** - * usb_ep_alloc_request - allocate a request object to use with this endpoint - * @ep:the endpoint to be used with with the request - * @gfp_flags:GFP_* flags to use - * - * Request objects must be allocated with this call, since they normally - * need controller-specific setup and may even need endpoint-specific - * resources such as allocation of DMA descriptors. - * Requests may be submitted with usb_ep_queue(), and receive a single - * completion callback. Free requests with usb_ep_free_request(), when - * they are no longer needed. - * - * Returns the request, or null if one could not be allocated. - */ -static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, - gfp_t gfp_flags) -{ - return ep->ops->alloc_request(ep, gfp_flags); -} - -/** - * usb_ep_free_request - frees a request object - * @ep:the endpoint associated with the request - * @req:the request being freed - * - * Reverses the effect of usb_ep_alloc_request(). - * Caller guarantees the request is not queued, and that it will - * no longer be requeued (or otherwise used). - */ -static inline void usb_ep_free_request(struct usb_ep *ep, - struct usb_request *req) -{ - ep->ops->free_request(ep, req); -} - -/** - * usb_ep_queue - queues (submits) an I/O request to an endpoint. - * @ep:the endpoint associated with the request - * @req:the request being submitted - * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't - * pre-allocate all necessary memory with the request. - * - * This tells the device controller to perform the specified request through - * that endpoint (reading or writing a buffer). When the request completes, - * including being canceled by usb_ep_dequeue(), the request's completion - * routine is called to return the request to the driver. Any endpoint - * (except control endpoints like ep0) may have more than one transfer - * request queued; they complete in FIFO order. Once a gadget driver - * submits a request, that request may not be examined or modified until it - * is given back to that driver through the completion callback. - * - * Each request is turned into one or more packets. The controller driver - * never merges adjacent requests into the same packet. OUT transfers - * will sometimes use data that's already buffered in the hardware. - * Drivers can rely on the fact that the first byte of the request's buffer - * always corresponds to the first byte of some USB packet, for both - * IN and OUT transfers. - * - * Bulk endpoints can queue any amount of data; the transfer is packetized - * automatically. The last packet will be short if the request doesn't fill it - * out completely. Zero length packets (ZLPs) should be avoided in portable - * protocols since not all usb hardware can successfully handle zero length - * packets. (ZLPs may be explicitly written, and may be implicitly written if - * the request 'zero' flag is set.) Bulk endpoints may also be used - * for interrupt transfers; but the reverse is not true, and some endpoints - * won't support every interrupt transfer. (Such as 768 byte packets.) - * - * Interrupt-only endpoints are less functional than bulk endpoints, for - * example by not supporting queueing or not handling buffers that are - * larger than the endpoint's maxpacket size. They may also treat data - * toggle differently. - * - * Control endpoints ... after getting a setup() callback, the driver queues - * one response (even if it would be zero length). That enables the - * status ack, after transfering data as specified in the response. Setup - * functions may return negative error codes to generate protocol stalls. - * (Note that some USB device controllers disallow protocol stall responses - * in some cases.) When control responses are deferred (the response is - * written after the setup callback returns), then usb_ep_set_halt() may be - * used on ep0 to trigger protocol stalls. Depending on the controller, - * it may not be possible to trigger a status-stage protocol stall when the - * data stage is over, that is, from within the response's completion - * routine. - * - * For periodic endpoints, like interrupt or isochronous ones, the usb host - * arranges to poll once per interval, and the gadget driver usually will - * have queued some data to transfer at that time. - * - * Returns zero, or a negative error code. Endpoints that are not enabled - * report errors; errors will also be - * reported when the usb peripheral is disconnected. - */ -static inline int usb_ep_queue(struct usb_ep *ep, - struct usb_request *req, gfp_t gfp_flags) -{ - return ep->ops->queue(ep, req, gfp_flags); -} - -/** - * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint - * @ep:the endpoint associated with the request - * @req:the request being canceled - * - * if the request is still active on the endpoint, it is dequeued and its - * completion routine is called (with status -ECONNRESET); else a negative - * error code is returned. - * - * note that some hardware can't clear out write fifos (to unlink the request - * at the head of the queue) except as part of disconnecting from usb. such - * restrictions prevent drivers from supporting configuration changes, - * even to configuration zero (a "chapter 9" requirement). - */ -static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req) -{ - return ep->ops->dequeue(ep, req); -} - -/** - * usb_ep_set_halt - sets the endpoint halt feature. - * @ep: the non-isochronous endpoint being stalled - * - * Use this to stall an endpoint, perhaps as an error report. - * Except for control endpoints, - * the endpoint stays halted (will not stream any data) until the host - * clears this feature; drivers may need to empty the endpoint's request - * queue first, to make sure no inappropriate transfers happen. - * - * Note that while an endpoint CLEAR_FEATURE will be invisible to the - * gadget driver, a SET_INTERFACE will not be. To reset endpoints for the - * current altsetting, see usb_ep_clear_halt(). When switching altsettings, - * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints. - * - * Returns zero, or a negative error code. On success, this call sets - * underlying hardware state that blocks data transfers. - * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any - * transfer requests are still queued, or if the controller hardware - * (usually a FIFO) still holds bytes that the host hasn't collected. - */ -static inline int usb_ep_set_halt(struct usb_ep *ep) -{ - return ep->ops->set_halt(ep, 1); -} - -/** - * usb_ep_clear_halt - clears endpoint halt, and resets toggle - * @ep:the bulk or interrupt endpoint being reset - * - * Use this when responding to the standard usb "set interface" request, - * for endpoints that aren't reconfigured, after clearing any other state - * in the endpoint's i/o queue. - * - * Returns zero, or a negative error code. On success, this call clears - * the underlying hardware state reflecting endpoint halt and data toggle. - * Note that some hardware can't support this request (like pxa2xx_udc), - * and accordingly can't correctly implement interface altsettings. - */ -static inline int usb_ep_clear_halt(struct usb_ep *ep) -{ - return ep->ops->set_halt(ep, 0); -} - -/** - * usb_ep_set_wedge - sets the halt feature and ignores clear requests - * @ep: the endpoint being wedged - * - * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) - * requests. If the gadget driver clears the halt status, it will - * automatically unwedge the endpoint. - * - * Returns zero on success, else negative errno. - */ -static inline int -usb_ep_set_wedge(struct usb_ep *ep) -{ - if (ep->ops->set_wedge) - return ep->ops->set_wedge(ep); - else - return ep->ops->set_halt(ep, 1); -} - -/** - * usb_ep_fifo_status - returns number of bytes in fifo, or error - * @ep: the endpoint whose fifo status is being checked. - * - * FIFO endpoints may have "unclaimed data" in them in certain cases, - * such as after aborted transfers. Hosts may not have collected all - * the IN data written by the gadget driver (and reported by a request - * completion). The gadget driver may not have collected all the data - * written OUT to it by the host. Drivers that need precise handling for - * fault reporting or recovery may need to use this call. - * - * This returns the number of such bytes in the fifo, or a negative - * errno if the endpoint doesn't use a FIFO or doesn't support such - * precise handling. - */ -static inline int usb_ep_fifo_status(struct usb_ep *ep) -{ - if (ep->ops->fifo_status) - return ep->ops->fifo_status(ep); - else - return -EOPNOTSUPP; -} - -/** - * usb_ep_fifo_flush - flushes contents of a fifo - * @ep: the endpoint whose fifo is being flushed. - * - * This call may be used to flush the "unclaimed data" that may exist in - * an endpoint fifo after abnormal transaction terminations. The call - * must never be used except when endpoint is not being used for any - * protocol translation. - */ -static inline void usb_ep_fifo_flush(struct usb_ep *ep) -{ - if (ep->ops->fifo_flush) - ep->ops->fifo_flush(ep); -} - - -/*-------------------------------------------------------------------------*/ - -struct usb_gadget; - -/* the rest of the api to the controller hardware: device operations, - * which don't involve endpoints (or i/o). - */ -struct usb_gadget_ops { - int (*get_frame)(struct usb_gadget *); - int (*wakeup)(struct usb_gadget *); - int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); - int (*vbus_session) (struct usb_gadget *, int is_active); - int (*vbus_draw) (struct usb_gadget *, unsigned mA); - int (*pullup) (struct usb_gadget *, int is_on); - int (*ioctl)(struct usb_gadget *, - unsigned code, unsigned long param); -}; - -/** - * struct usb_gadget - represents a usb slave device - * @ops: Function pointers used to access hardware-specific operations. - * @ep0: Endpoint zero, used when reading or writing responses to - * driver setup() requests - * @ep_list: List of other endpoints supported by the device. - * @speed: Speed of current connection to USB host. - * @is_dualspeed: True if the controller supports both high and full speed - * operation. If it does, the gadget driver must also support both. - * @is_otg: True if the USB device port uses a Mini-AB jack, so that the - * gadget driver must provide a USB OTG descriptor. - * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable - * is in the Mini-AB jack, and HNP has been used to switch roles - * so that the "A" device currently acts as A-Peripheral, not A-Host. - * @a_hnp_support: OTG device feature flag, indicating that the A-Host - * supports HNP at this port. - * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host - * only supports HNP on a different root port. - * @b_hnp_enable: OTG device feature flag, indicating that the A-Host - * enabled HNP support. - * @name: Identifies the controller hardware type. Used in diagnostics - * and sometimes configuration. - * @dev: Driver model state for this abstract device. - * - * Gadgets have a mostly-portable "gadget driver" implementing device - * functions, handling all usb configurations and interfaces. Gadget - * drivers talk to hardware-specific code indirectly, through ops vectors. - * That insulates the gadget driver from hardware details, and packages - * the hardware endpoints through generic i/o queues. The "usb_gadget" - * and "usb_ep" interfaces provide that insulation from the hardware. - * - * Except for the driver data, all fields in this structure are - * read-only to the gadget driver. That driver data is part of the - * "driver model" infrastructure in 2.6 (and later) kernels, and for - * earlier systems is grouped in a similar structure that's not known - * to the rest of the kernel. - * - * Values of the three OTG device feature flags are updated before the - * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before - * driver suspend() calls. They are valid only when is_otg, and when the - * device is acting as a B-Peripheral (so is_a_peripheral is false). - */ -struct usb_gadget { - /* readonly to gadget driver */ - const struct usb_gadget_ops *ops; - struct usb_ep *ep0; - struct list_head ep_list; /* of usb_ep */ - enum usb_device_speed speed; - unsigned is_dualspeed:1; - unsigned is_otg:1; - unsigned is_a_peripheral:1; - unsigned b_hnp_enable:1; - unsigned a_hnp_support:1; - unsigned a_alt_hnp_support:1; - const char *name; - struct device dev; -}; - -static inline void set_gadget_data(struct usb_gadget *gadget, void *data) - { dev_set_drvdata(&gadget->dev, data); } -static inline void *get_gadget_data(struct usb_gadget *gadget) - { return dev_get_drvdata(&gadget->dev); } - -/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */ -#define gadget_for_each_ep(tmp,gadget) \ - list_for_each_entry(tmp, &(gadget)->ep_list, ep_list) - - -/** - * gadget_is_dualspeed - return true iff the hardware handles high speed - * @g: controller that might support both high and full speeds - */ -static inline int gadget_is_dualspeed(struct usb_gadget *g) -{ -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->is_dualspeed" ... that might be - * useful to work around hardware bugs, but is mostly pointless - */ - return 1; -#else - return 0; -#endif -} - -/** - * gadget_is_otg - return true iff the hardware is OTG-ready - * @g: controller that might have a Mini-AB connector - * - * This is a runtime test, since kernels with a USB-OTG stack sometimes - * run on boards which only have a Mini-B (or Mini-A) connector. - */ -static inline int gadget_is_otg(struct usb_gadget *g) -{ -#ifdef CONFIG_USB_OTG - return g->is_otg; -#else - return 0; -#endif -} - -/** - * usb_gadget_frame_number - returns the current frame number - * @gadget: controller that reports the frame number - * - * Returns the usb frame number, normally eleven bits from a SOF packet, - * or negative errno if this device doesn't support this capability. - */ -static inline int usb_gadget_frame_number(struct usb_gadget *gadget) -{ - return gadget->ops->get_frame(gadget); -} - -/** - * usb_gadget_wakeup - tries to wake up the host connected to this gadget - * @gadget: controller used to wake up the host - * - * Returns zero on success, else negative error code if the hardware - * doesn't support such attempts, or its support has not been enabled - * by the usb host. Drivers must return device descriptors that report - * their ability to support this, or hosts won't enable it. - * - * This may also try to use SRP to wake the host and start enumeration, - * even if OTG isn't otherwise in use. OTG devices may also start - * remote wakeup even when hosts don't explicitly enable it. - */ -static inline int usb_gadget_wakeup(struct usb_gadget *gadget) -{ - if (!gadget->ops->wakeup) - return -EOPNOTSUPP; - return gadget->ops->wakeup(gadget); -} - -/** - * usb_gadget_set_selfpowered - sets the device selfpowered feature. - * @gadget:the device being declared as self-powered - * - * this affects the device status reported by the hardware driver - * to reflect that it now has a local power supply. - * - * returns zero on success, else negative errno. - */ -static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget) -{ - if (!gadget->ops->set_selfpowered) - return -EOPNOTSUPP; - return gadget->ops->set_selfpowered(gadget, 1); -} - -/** - * usb_gadget_clear_selfpowered - clear the device selfpowered feature. - * @gadget:the device being declared as bus-powered - * - * this affects the device status reported by the hardware driver. - * some hardware may not support bus-powered operation, in which - * case this feature's value can never change. - * - * returns zero on success, else negative errno. - */ -static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) -{ - if (!gadget->ops->set_selfpowered) - return -EOPNOTSUPP; - return gadget->ops->set_selfpowered(gadget, 0); -} - -/** - * usb_gadget_vbus_connect - Notify controller that VBUS is powered - * @gadget:The device which now has VBUS power. - * - * This call is used by a driver for an external transceiver (or GPIO) - * that detects a VBUS power session starting. Common responses include - * resuming the controller, activating the D+ (or D-) pullup to let the - * host detect that a USB device is attached, and starting to draw power - * (8mA or possibly more, especially after SET_CONFIGURATION). - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget) -{ - if (!gadget->ops->vbus_session) - return -EOPNOTSUPP; - return gadget->ops->vbus_session(gadget, 1); -} - -/** - * usb_gadget_vbus_draw - constrain controller's VBUS power usage - * @gadget:The device whose VBUS usage is being described - * @mA:How much current to draw, in milliAmperes. This should be twice - * the value listed in the configuration descriptor bMaxPower field. - * - * This call is used by gadget drivers during SET_CONFIGURATION calls, - * reporting how much power the device may consume. For example, this - * could affect how quickly batteries are recharged. - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) -{ - if (!gadget->ops->vbus_draw) - return -EOPNOTSUPP; - return gadget->ops->vbus_draw(gadget, mA); -} - -/** - * usb_gadget_vbus_disconnect - notify controller about VBUS session end - * @gadget:the device whose VBUS supply is being described - * - * This call is used by a driver for an external transceiver (or GPIO) - * that detects a VBUS power session ending. Common responses include - * reversing everything done in usb_gadget_vbus_connect(). - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget) -{ - if (!gadget->ops->vbus_session) - return -EOPNOTSUPP; - return gadget->ops->vbus_session(gadget, 0); -} - -/** - * usb_gadget_connect - software-controlled connect to USB host - * @gadget:the peripheral being connected - * - * Enables the D+ (or potentially D-) pullup. The host will start - * enumerating this gadget when the pullup is active and a VBUS session - * is active (the link is powered). This pullup is always enabled unless - * usb_gadget_disconnect() has been used to disable it. - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_connect(struct usb_gadget *gadget) -{ - if (!gadget->ops->pullup) - return -EOPNOTSUPP; - return gadget->ops->pullup(gadget, 1); -} - -/** - * usb_gadget_disconnect - software-controlled disconnect from USB host - * @gadget:the peripheral being disconnected - * - * Disables the D+ (or potentially D-) pullup, which the host may see - * as a disconnect (when a VBUS session is active). Not all systems - * support software pullup controls. - * - * This routine may be used during the gadget driver bind() call to prevent - * the peripheral from ever being visible to the USB host, unless later - * usb_gadget_connect() is called. For example, user mode components may - * need to be activated before the system can talk to hosts. - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_disconnect(struct usb_gadget *gadget) -{ - if (!gadget->ops->pullup) - return -EOPNOTSUPP; - return gadget->ops->pullup(gadget, 0); -} - - -/*-------------------------------------------------------------------------*/ - -/** - * struct usb_gadget_driver - driver for usb 'slave' devices - * @function: String describing the gadget's function - * @speed: Highest speed the driver handles. - * @bind: Invoked when the driver is bound to a gadget, usually - * after registering the driver. - * At that point, ep0 is fully initialized, and ep_list holds - * the currently-available endpoints. - * Called in a context that permits sleeping. - * @setup: Invoked for ep0 control requests that aren't handled by - * the hardware level driver. Most calls must be handled by - * the gadget driver, including descriptor and configuration - * management. The 16 bit members of the setup data are in - * USB byte order. Called in_interrupt; this may not sleep. Driver - * queues a response to ep0, or returns negative to stall. - * @disconnect: Invoked after all transfers have been stopped, - * when the host is disconnected. May be called in_interrupt; this - * may not sleep. Some devices can't detect disconnect, so this might - * not be called except as part of controller shutdown. - * @unbind: Invoked when the driver is unbound from a gadget, - * usually from rmmod (after a disconnect is reported). - * Called in a context that permits sleeping. - * @suspend: Invoked on USB suspend. May be called in_interrupt. - * @resume: Invoked on USB resume. May be called in_interrupt. - * @driver: Driver model state for this driver. - * - * Devices are disabled till a gadget driver successfully bind()s, which - * means the driver will handle setup() requests needed to enumerate (and - * meet "chapter 9" requirements) then do some useful work. - * - * If gadget->is_otg is true, the gadget driver must provide an OTG - * descriptor during enumeration, or else fail the bind() call. In such - * cases, no USB traffic may flow until both bind() returns without - * having called usb_gadget_disconnect(), and the USB host stack has - * initialized. - * - * Drivers use hardware-specific knowledge to configure the usb hardware. - * endpoint addressing is only one of several hardware characteristics that - * are in descriptors the ep0 implementation returns from setup() calls. - * - * Except for ep0 implementation, most driver code shouldn't need change to - * run on top of different usb controllers. It'll use endpoints set up by - * that ep0 implementation. - * - * The usb controller driver handles a few standard usb requests. Those - * include set_address, and feature flags for devices, interfaces, and - * endpoints (the get_status, set_feature, and clear_feature requests). - * - * Accordingly, the driver's setup() callback must always implement all - * get_descriptor requests, returning at least a device descriptor and - * a configuration descriptor. Drivers must make sure the endpoint - * descriptors match any hardware constraints. Some hardware also constrains - * other descriptors. (The pxa250 allows only configurations 1, 2, or 3). - * - * The driver's setup() callback must also implement set_configuration, - * and should also implement set_interface, get_configuration, and - * get_interface. Setting a configuration (or interface) is where - * endpoints should be activated or (config 0) shut down. - * - * (Note that only the default control endpoint is supported. Neither - * hosts nor devices generally support control traffic except to ep0.) - * - * Most devices will ignore USB suspend/resume operations, and so will - * not provide those callbacks. However, some may need to change modes - * when the host is not longer directing those activities. For example, - * local controls (buttons, dials, etc) may need to be re-enabled since - * the (remote) host can't do that any longer; or an error state might - * be cleared, to make the device behave identically whether or not - * power is maintained. - */ -struct usb_gadget_driver { - char *function; - enum usb_device_speed speed; - int (*bind)(struct usb_gadget *); - void (*unbind)(struct usb_gadget *); - int (*setup)(struct usb_gadget *, - const struct usb_ctrlrequest *); - void (*disconnect)(struct usb_gadget *); - void (*suspend)(struct usb_gadget *); - void (*resume)(struct usb_gadget *); - - /* FIXME support safe rmmod */ - struct device_driver driver; -}; - - - -/*-------------------------------------------------------------------------*/ - -/* driver modules register and unregister, as usual. - * these calls must be made in a context that can sleep. - * - * these will usually be implemented directly by the hardware-dependent - * usb bus interface driver, which will only support a single driver. - */ - -/** - * usb_gadget_register_driver - register a gadget driver - * @driver:the driver being registered - * - * Call this in your gadget driver's module initialization function, - * to tell the underlying usb controller driver about your driver. - * The driver's bind() function will be called to bind it to a - * gadget before this registration call returns. It's expected that - * the bind() functions will be in init sections. - * This function must be called in a context that can sleep. - */ -int usb_gadget_register_driver(struct usb_gadget_driver *driver); - -/** - * usb_gadget_unregister_driver - unregister a gadget driver - * @driver:the driver being unregistered - * - * Call this in your gadget driver's module cleanup function, - * to tell the underlying usb controller that your driver is - * going away. If the controller is connected to a USB host, - * it will first disconnect(). The driver is also requested - * to unbind() and clean up any device state, before this procedure - * finally returns. It's expected that the unbind() functions - * will in in exit sections, so may not be linked in some kernels. - * This function must be called in a context that can sleep. - */ -int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); - -/*-------------------------------------------------------------------------*/ - -/* utility to simplify dealing with string descriptors */ - -/** - * struct usb_string - wraps a C string and its USB id - * @id:the (nonzero) ID for this string - * @s:the string, in UTF-8 encoding - * - * If you're using usb_gadget_get_string(), use this to wrap a string - * together with its ID. - */ -struct usb_string { - u8 id; - const char *s; -}; - -/** - * struct usb_gadget_strings - a set of USB strings in a given language - * @language:identifies the strings' language (0x0409 for en-us) - * @strings:array of strings with their ids - * - * If you're using usb_gadget_get_string(), use this to wrap all the - * strings for a given language. - */ -struct usb_gadget_strings { - u16 language; /* 0x0409 for en-us */ - struct usb_string *strings; -}; - -/* put descriptor for string with that id into buf (buflen >= 256) */ -int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf); - -/*-------------------------------------------------------------------------*/ - -/* utility to simplify managing config descriptors */ - -/* write vector of descriptors into buffer */ -int usb_descriptor_fillbuf(void *, unsigned, - const struct usb_descriptor_header **); - -/* build config descriptor from single descriptor vector */ -int usb_gadget_config_buf(const struct usb_config_descriptor *config, - void *buf, unsigned buflen, const struct usb_descriptor_header **desc); - -/* copy a NULL-terminated vector of descriptors */ -struct usb_descriptor_header **usb_copy_descriptors( - struct usb_descriptor_header **); - -/* return copy of endpoint descriptor given original descriptor set */ -struct usb_endpoint_descriptor *usb_find_endpoint( - struct usb_descriptor_header **src, - struct usb_descriptor_header **copy, - struct usb_endpoint_descriptor *match); - -/** - * usb_free_descriptors - free descriptors returned by usb_copy_descriptors() - * @v: vector of descriptors - */ -static inline void usb_free_descriptors(struct usb_descriptor_header **v) -{ - kfree(v); -} - -/*-------------------------------------------------------------------------*/ - -/* utility wrapping a simple endpoint selection policy */ - -extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, - struct usb_endpoint_descriptor *) __devinit; - -extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit; - -#endif /* __LINUX_USB_GADGET_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadgetfs.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadgetfs.h.svn-base deleted file mode 100644 index 612102e4..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gadgetfs.h.svn-base +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Other than ep0 operations, most things are done by read() and write() - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. Operations on - * ep0 require ioctl() operations. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include <linux/types.h> -#include <asm/ioctl.h> - -#include <linux/usb/ch9.h> - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - /* and likely more ! */ -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_gadgetfs_event { - union { - /* NOP, DISCONNECT, SUSPEND: nothing - * ... some hardware can't report disconnection - */ - - /* CONNECT: just the speed */ - enum usb_device_speed speed; - - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction - * ... includes SET_CONFIGURATION, SET_INTERFACE - */ - struct usb_ctrlrequest setup; - } u; - enum usb_gadgetfs_event_type type; -}; - - -/* The 'g' code is also used by printer gadget ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g', 3) - -#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gpio_vbus.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gpio_vbus.h.svn-base deleted file mode 100644 index d9f03ccc..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/gpio_vbus.h.svn-base +++ /dev/null @@ -1,30 +0,0 @@ -/* - * A simple GPIO VBUS sensing driver for B peripheral only devices - * with internal transceivers. - * Optionally D+ pullup can be controlled by a second GPIO. - * - * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/** - * struct gpio_vbus_mach_info - configuration for gpio_vbus - * @gpio_vbus: VBUS sensing GPIO - * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) - * @gpio_vbus_inverted: true if gpio_vbus is active low - * @gpio_pullup_inverted: true if gpio_pullup is active low - * - * The VBUS sensing GPIO should have a pulldown, which will normally be - * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a - * value the GPIO detects as active. Some systems will use comparators. - */ -struct gpio_vbus_mach_info { - int gpio_vbus; - int gpio_pullup; - bool gpio_vbus_inverted; - bool gpio_pullup_inverted; -}; diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/input.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/input.h.svn-base deleted file mode 100644 index 0e010b22..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/input.h.svn-base +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 2005 Dmitry Torokhov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef __LINUX_USB_INPUT_H -#define __LINUX_USB_INPUT_H - -#include <linux/usb.h> -#include <linux/input.h> -#include <asm/byteorder.h> - -static inline void -usb_to_input_id(const struct usb_device *dev, struct input_id *id) -{ - id->bustype = BUS_USB; - id->vendor = le16_to_cpu(dev->descriptor.idVendor); - id->product = le16_to_cpu(dev->descriptor.idProduct); - id->version = le16_to_cpu(dev->descriptor.bcdDevice); -} - -#endif /* __LINUX_USB_INPUT_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/iowarrior.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/iowarrior.h.svn-base deleted file mode 100644 index 4fd6513d..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/iowarrior.h.svn-base +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __LINUX_USB_IOWARRIOR_H -#define __LINUX_USB_IOWARRIOR_H - -#define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */ - -/* Define the ioctl commands for reading and writing data */ -#define IOW_WRITE _IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *) -#define IOW_READ _IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *) - -/* - A struct for available device info which is read - with the ioctl IOW_GETINFO. - To be compatible with 2.4 userspace which didn't have an easy way to get - this information. -*/ -struct iowarrior_info { - /* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */ - __u32 vendor; - /* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_X) */ - __u32 product; - /* the serial number of our chip (if a serial-number is not available - * this is empty string) */ - __u8 serial[9]; - /* revision number of the chip */ - __u32 revision; - /* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */ - __u32 speed; - /* power consumption of the device in mA */ - __u32 power; - /* the number of the endpoint */ - __u32 if_num; - /* size of the data-packets on this interface */ - __u32 report_size; -}; - -/* - Get some device-information (product-id , serial-number etc.) - in order to identify a chip. -*/ -#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info) - -#endif /* __LINUX_USB_IOWARRIOR_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/irda.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/irda.h.svn-base deleted file mode 100644 index e345ceaf..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/irda.h.svn-base +++ /dev/null @@ -1,151 +0,0 @@ -/* - * USB IrDA Bridge Device Definition - */ - -#ifndef __LINUX_USB_IRDA_H -#define __LINUX_USB_IRDA_H - -/* This device should use Application-specific class */ - -#define USB_SUBCLASS_IRDA 0x02 - -/*-------------------------------------------------------------------------*/ - -/* Class-Specific requests (bRequest field) */ - -#define USB_REQ_CS_IRDA_RECEIVING 1 -#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY 3 -#define USB_REQ_CS_IRDA_RATE_SNIFF 4 -#define USB_REQ_CS_IRDA_UNICAST_LIST 5 -#define USB_REQ_CS_IRDA_GET_CLASS_DESC 6 - -/*-------------------------------------------------------------------------*/ - -/* Class-Specific descriptor */ - -#define USB_DT_CS_IRDA 0x21 - -/*-------------------------------------------------------------------------*/ - -/* Data sizes */ - -#define USB_IRDA_DS_2048 (1 << 5) -#define USB_IRDA_DS_1024 (1 << 4) -#define USB_IRDA_DS_512 (1 << 3) -#define USB_IRDA_DS_256 (1 << 2) -#define USB_IRDA_DS_128 (1 << 1) -#define USB_IRDA_DS_64 (1 << 0) - -/* Window sizes */ - -#define USB_IRDA_WS_7 (1 << 6) -#define USB_IRDA_WS_6 (1 << 5) -#define USB_IRDA_WS_5 (1 << 4) -#define USB_IRDA_WS_4 (1 << 3) -#define USB_IRDA_WS_3 (1 << 2) -#define USB_IRDA_WS_2 (1 << 1) -#define USB_IRDA_WS_1 (1 << 0) - -/* Min turnaround times in usecs */ - -#define USB_IRDA_MTT_0 (1 << 7) -#define USB_IRDA_MTT_10 (1 << 6) -#define USB_IRDA_MTT_50 (1 << 5) -#define USB_IRDA_MTT_100 (1 << 4) -#define USB_IRDA_MTT_500 (1 << 3) -#define USB_IRDA_MTT_1000 (1 << 2) -#define USB_IRDA_MTT_5000 (1 << 1) -#define USB_IRDA_MTT_10000 (1 << 0) - -/* Baud rates */ - -#define USB_IRDA_BR_4000000 (1 << 8) -#define USB_IRDA_BR_1152000 (1 << 7) -#define USB_IRDA_BR_576000 (1 << 6) -#define USB_IRDA_BR_115200 (1 << 5) -#define USB_IRDA_BR_57600 (1 << 4) -#define USB_IRDA_BR_38400 (1 << 3) -#define USB_IRDA_BR_19200 (1 << 2) -#define USB_IRDA_BR_9600 (1 << 1) -#define USB_IRDA_BR_2400 (1 << 0) - -/* Additional BOFs */ - -#define USB_IRDA_AB_0 (1 << 7) -#define USB_IRDA_AB_1 (1 << 6) -#define USB_IRDA_AB_2 (1 << 5) -#define USB_IRDA_AB_3 (1 << 4) -#define USB_IRDA_AB_6 (1 << 3) -#define USB_IRDA_AB_12 (1 << 2) -#define USB_IRDA_AB_24 (1 << 1) -#define USB_IRDA_AB_48 (1 << 0) - -/* IRDA Rate Sniff */ - -#define USB_IRDA_RATE_SNIFF 1 - -/*-------------------------------------------------------------------------*/ - -struct usb_irda_cs_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdSpecRevision; - __u8 bmDataSize; - __u8 bmWindowSize; - __u8 bmMinTurnaroundTime; - __le16 wBaudRate; - __u8 bmAdditionalBOFs; - __u8 bIrdaRateSniff; - __u8 bMaxUnicastList; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* Data Format */ - -#define USB_IRDA_STATUS_MEDIA_BUSY (1 << 7) - -/* The following is a 4-bit value used for both - * inbound and outbound headers: - * - * 0 - speed ignored - * 1 - 2400 bps - * 2 - 9600 bps - * 3 - 19200 bps - * 4 - 38400 bps - * 5 - 57600 bps - * 6 - 115200 bps - * 7 - 576000 bps - * 8 - 1.152 Mbps - * 9 - 5 mbps - * 10..15 - Reserved - */ -#define USB_IRDA_STATUS_LINK_SPEED 0x0f - -/* The following is a 4-bit value used only for - * outbound header: - * - * 0 - No change (BOF ignored) - * 1 - 48 BOFs - * 2 - 24 BOFs - * 3 - 12 BOFs - * 4 - 6 BOFs - * 5 - 3 BOFs - * 6 - 2 BOFs - * 7 - 1 BOFs - * 8 - 0 BOFs - * 9..15 - Reserved - */ -#define USB_IRDA_EXTRA_BOFS 0xf0 - -struct usb_irda_inbound_header { - __u8 bmStatus; -}; - -struct usb_irda_outbound_header { - __u8 bmChange; -}; - -#endif /* __LINUX_USB_IRDA_H */ - diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/isp116x.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/isp116x.h.svn-base deleted file mode 100644 index 96ca114e..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/isp116x.h.svn-base +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Board initialization code should put one of these into dev->platform_data - * and place the isp116x onto platform_bus. - */ - -#ifndef __LINUX_USB_ISP116X_H -#define __LINUX_USB_ISP116X_H - -struct isp116x_platform_data { - /* Enable internal resistors on downstream ports */ - unsigned sel15Kres:1; - /* On-chip overcurrent detection */ - unsigned oc_enable:1; - /* INT output polarity */ - unsigned int_act_high:1; - /* INT edge or level triggered */ - unsigned int_edge_triggered:1; - /* Enable wakeup by devices on usb bus (e.g. wakeup - by attachment/detachment or by device activity - such as moving a mouse). When chosen, this option - prevents stopping internal clock, increasing - thereby power consumption in suspended state. */ - unsigned remote_wakeup_enable:1; - /* Inter-io delay (ns). The chip is picky about access timings; it - expects at least: - 150ns delay between consecutive accesses to DATA_REG, - 300ns delay between access to ADDR_REG and DATA_REG - OE, WE MUST NOT be changed during these intervals - */ - void (*delay) (struct device *dev, int delay); -}; - -#endif /* __LINUX_USB_ISP116X_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/midi.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/midi.h.svn-base deleted file mode 100644 index 1d104086..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/midi.h.svn-base +++ /dev/null @@ -1,112 +0,0 @@ -/* - * <linux/usb/midi.h> -- USB MIDI definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson <ben.williamson@greyinnovation.com> - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for MIDI Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/midi10.pdf - */ - -#ifndef __LINUX_USB_MIDI_H -#define __LINUX_USB_MIDI_H - -#include <linux/types.h> - -/* A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define USB_MS_HEADER 0x01 -#define USB_MS_MIDI_IN_JACK 0x02 -#define USB_MS_MIDI_OUT_JACK 0x03 -#define USB_MS_ELEMENT 0x04 - -/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ -#define USB_MS_GENERAL 0x01 - -/* A.3 MS MIDI IN and OUT Jack Types */ -#define USB_MS_EMBEDDED 0x01 -#define USB_MS_EXTERNAL 0x02 - -/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ -struct usb_ms_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __le16 bcdMSC; - __le16 wTotalLength; -} __attribute__ ((packed)); - -#define USB_DT_MS_HEADER_SIZE 7 - -/* 6.1.2.2 MIDI IN Jack Descriptor */ -struct usb_midi_in_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 iJack; -} __attribute__ ((packed)); - -#define USB_DT_MIDI_IN_SIZE 6 - -struct usb_midi_source_pin { - __u8 baSourceID; - __u8 baSourcePin; -} __attribute__ ((packed)); - -/* 6.1.2.3 MIDI OUT Jack Descriptor */ -struct usb_midi_out_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 bNrInputPins; /* p */ - struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- ommitted due to variable-sized pins[] */ -} __attribute__ ((packed)); - -#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ -struct usb_midi_out_jack_descriptor_##p { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bJackType; \ - __u8 bJackID; \ - __u8 bNrInputPins; \ - struct usb_midi_source_pin pins[p]; \ - __u8 iJack; \ -} __attribute__ ((packed)) - -/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ -struct usb_ms_endpoint_descriptor { - __u8 bLength; /* 4+n */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ - __u8 bNumEmbMIDIJack; /* n */ - __u8 baAssocJackID[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ -struct usb_ms_endpoint_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bNumEmbMIDIJack; \ - __u8 baAssocJackID[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_MIDI_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/musb.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/musb.h.svn-base deleted file mode 100644 index d6aad0ea..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/musb.h.svn-base +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This is used to for host and peripheral modes of the driver for - * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC. - * - * Board initialization should put one of these into dev->platform_data, - * probably on some platform_device named "musb_hdrc". It encapsulates - * key configuration differences between boards. - */ - -/* The USB role is defined by the connector used on the board, so long as - * standards are being followed. (Developer boards sometimes won't.) - */ -enum musb_mode { - MUSB_UNDEFINED = 0, - MUSB_HOST, /* A or Mini-A connector */ - MUSB_PERIPHERAL, /* B or Mini-B connector */ - MUSB_OTG /* Mini-AB connector */ -}; - -struct clk; - -struct musb_hdrc_eps_bits { - const char name[16]; - u8 bits; -}; - -struct musb_hdrc_config { - /* MUSB configuration-specific details */ - unsigned multipoint:1; /* multipoint device */ - unsigned dyn_fifo:1; /* supports dynamic fifo sizing */ - unsigned soft_con:1; /* soft connect required */ - unsigned utm_16:1; /* utm data witdh is 16 bits */ - unsigned big_endian:1; /* true if CPU uses big-endian */ - unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ - unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ - unsigned high_iso_tx:1; /* Tx ep required for HB iso */ - unsigned high_iso_rx:1; /* Rx ep required for HD iso */ - unsigned dma:1; /* supports DMA */ - unsigned vendor_req:1; /* vendor registers required */ - - u8 num_eps; /* number of endpoints _with_ ep0 */ - u8 dma_channels; /* number of dma channels */ - u8 dyn_fifo_size; /* dynamic size in bytes */ - u8 vendor_ctrl; /* vendor control reg width */ - u8 vendor_stat; /* vendor status reg witdh */ - u8 dma_req_chan; /* bitmask for required dma channels */ - u8 ram_bits; /* ram address size */ - - struct musb_hdrc_eps_bits *eps_bits; -#ifdef CONFIG_BLACKFIN - /* A GPIO controlling VRSEL in Blackfin */ - unsigned int gpio_vrsel; -#endif - -}; - -struct musb_hdrc_platform_data { - /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */ - u8 mode; - - /* for clk_get() */ - const char *clock; - - /* (HOST or OTG) switch VBUS on/off */ - int (*set_vbus)(struct device *dev, int is_on); - - /* (HOST or OTG) mA/2 power supplied on (default = 8mA) */ - u8 power; - - /* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */ - u8 min_power; - - /* (HOST or OTG) msec/2 after VBUS on till power good */ - u8 potpgt; - - /* Power the device on or off */ - int (*set_power)(int state); - - /* Turn device clock on or off */ - int (*set_clock)(struct clk *clock, int is_on); - - /* MUSB configuration-specific details */ - struct musb_hdrc_config *config; -}; - - -/* TUSB 6010 support */ - -#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */ -#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */ -#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */ - -#ifdef CONFIG_ARCH_OMAP2 - -extern int __init tusb6010_setup_interface( - struct musb_hdrc_platform_data *data, - unsigned ps_refclk, unsigned waitpin, - unsigned async_cs, unsigned sync_cs, - unsigned irq, unsigned dmachan); - -extern int tusb6010_platform_retime(unsigned is_refclk); - -#endif /* OMAP2 */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/net2280.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/net2280.h.svn-base deleted file mode 100644 index 96ca549a..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/net2280.h.svn-base +++ /dev/null @@ -1,443 +0,0 @@ -/* - * NetChip 2280 high/full speed USB device controller. - * Unlike many such controllers, this one talks PCI. - * - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) - * Copyright (C) 2003 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_NET2280_H -#define __LINUX_USB_NET2280_H - -/*-------------------------------------------------------------------------*/ - -/* NET2280 MEMORY MAPPED REGISTERS - * - * The register layout came from the chip documentation, and the bit - * number definitions were extracted from chip specification. - * - * Use the shift operator ('<<') to build bit masks, with readl/writel - * to access the registers through PCI. - */ - -/* main registers, BAR0 + 0x0000 */ -struct net2280_regs { - /* offset 0x0000 */ - u32 devinit; -#define LOCAL_CLOCK_FREQUENCY 8 -#define FORCE_PCI_RESET 7 -#define PCI_ID 6 -#define PCI_ENABLE 5 -#define FIFO_SOFT_RESET 4 -#define CFG_SOFT_RESET 3 -#define PCI_SOFT_RESET 2 -#define USB_SOFT_RESET 1 -#define M8051_RESET 0 - u32 eectl; -#define EEPROM_ADDRESS_WIDTH 23 -#define EEPROM_CHIP_SELECT_ACTIVE 22 -#define EEPROM_PRESENT 21 -#define EEPROM_VALID 20 -#define EEPROM_BUSY 19 -#define EEPROM_CHIP_SELECT_ENABLE 18 -#define EEPROM_BYTE_READ_START 17 -#define EEPROM_BYTE_WRITE_START 16 -#define EEPROM_READ_DATA 8 -#define EEPROM_WRITE_DATA 0 - u32 eeclkfreq; - u32 _unused0; - /* offset 0x0010 */ - - u32 pciirqenb0; /* interrupt PCI master ... */ -#define SETUP_PACKET_INTERRUPT_ENABLE 7 -#define ENDPOINT_F_INTERRUPT_ENABLE 6 -#define ENDPOINT_E_INTERRUPT_ENABLE 5 -#define ENDPOINT_D_INTERRUPT_ENABLE 4 -#define ENDPOINT_C_INTERRUPT_ENABLE 3 -#define ENDPOINT_B_INTERRUPT_ENABLE 2 -#define ENDPOINT_A_INTERRUPT_ENABLE 1 -#define ENDPOINT_0_INTERRUPT_ENABLE 0 - u32 pciirqenb1; -#define PCI_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - u32 cpu_irqenb0; /* ... or onboard 8051 */ -#define SETUP_PACKET_INTERRUPT_ENABLE 7 -#define ENDPOINT_F_INTERRUPT_ENABLE 6 -#define ENDPOINT_E_INTERRUPT_ENABLE 5 -#define ENDPOINT_D_INTERRUPT_ENABLE 4 -#define ENDPOINT_C_INTERRUPT_ENABLE 3 -#define ENDPOINT_B_INTERRUPT_ENABLE 2 -#define ENDPOINT_A_INTERRUPT_ENABLE 1 -#define ENDPOINT_0_INTERRUPT_ENABLE 0 - u32 cpu_irqenb1; -#define CPU_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_INTA_INTERRUPT_ENABLE 24 -#define PCI_PME_INTERRUPT_ENABLE 23 -#define PCI_SERR_INTERRUPT_ENABLE 22 -#define PCI_PERR_INTERRUPT_ENABLE 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - - /* offset 0x0020 */ - u32 _unused1; - u32 usbirqenb1; -#define USB_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_INTA_INTERRUPT_ENABLE 24 -#define PCI_PME_INTERRUPT_ENABLE 23 -#define PCI_SERR_INTERRUPT_ENABLE 22 -#define PCI_PERR_INTERRUPT_ENABLE 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - u32 irqstat0; -#define INTA_ASSERTED 12 -#define SETUP_PACKET_INTERRUPT 7 -#define ENDPOINT_F_INTERRUPT 6 -#define ENDPOINT_E_INTERRUPT 5 -#define ENDPOINT_D_INTERRUPT 4 -#define ENDPOINT_C_INTERRUPT 3 -#define ENDPOINT_B_INTERRUPT 2 -#define ENDPOINT_A_INTERRUPT 1 -#define ENDPOINT_0_INTERRUPT 0 - u32 irqstat1; -#define POWER_STATE_CHANGE_INTERRUPT 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT 26 -#define PCI_PARITY_ERROR_INTERRUPT 25 -#define PCI_INTA_INTERRUPT 24 -#define PCI_PME_INTERRUPT 23 -#define PCI_SERR_INTERRUPT 22 -#define PCI_PERR_INTERRUPT 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19 -#define PCI_RETRY_ABORT_INTERRUPT 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16 -#define SOF_DOWN_INTERRUPT 14 -#define GPIO_INTERRUPT 13 -#define DMA_D_INTERRUPT 12 -#define DMA_C_INTERRUPT 11 -#define DMA_B_INTERRUPT 10 -#define DMA_A_INTERRUPT 9 -#define EEPROM_DONE_INTERRUPT 8 -#define VBUS_INTERRUPT 7 -#define CONTROL_STATUS_INTERRUPT 6 -#define ROOT_PORT_RESET_INTERRUPT 4 -#define SUSPEND_REQUEST_INTERRUPT 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2 -#define RESUME_INTERRUPT 1 -#define SOF_INTERRUPT 0 - /* offset 0x0030 */ - u32 idxaddr; - u32 idxdata; - u32 fifoctl; -#define PCI_BASE2_RANGE 16 -#define IGNORE_FIFO_AVAILABILITY 3 -#define PCI_BASE2_SELECT 2 -#define FIFO_CONFIGURATION_SELECT 0 - u32 _unused2; - /* offset 0x0040 */ - u32 memaddr; -#define START 28 -#define DIRECTION 27 -#define FIFO_DIAGNOSTIC_SELECT 24 -#define MEMORY_ADDRESS 0 - u32 memdata0; - u32 memdata1; - u32 _unused3; - /* offset 0x0050 */ - u32 gpioctl; -#define GPIO3_LED_SELECT 12 -#define GPIO3_INTERRUPT_ENABLE 11 -#define GPIO2_INTERRUPT_ENABLE 10 -#define GPIO1_INTERRUPT_ENABLE 9 -#define GPIO0_INTERRUPT_ENABLE 8 -#define GPIO3_OUTPUT_ENABLE 7 -#define GPIO2_OUTPUT_ENABLE 6 -#define GPIO1_OUTPUT_ENABLE 5 -#define GPIO0_OUTPUT_ENABLE 4 -#define GPIO3_DATA 3 -#define GPIO2_DATA 2 -#define GPIO1_DATA 1 -#define GPIO0_DATA 0 - u32 gpiostat; -#define GPIO3_INTERRUPT 3 -#define GPIO2_INTERRUPT 2 -#define GPIO1_INTERRUPT 1 -#define GPIO0_INTERRUPT 0 -} __attribute__ ((packed)); - -/* usb control, BAR0 + 0x0080 */ -struct net2280_usb_regs { - /* offset 0x0080 */ - u32 stdrsp; -#define STALL_UNSUPPORTED_REQUESTS 31 -#define SET_TEST_MODE 16 -#define GET_OTHER_SPEED_CONFIGURATION 15 -#define GET_DEVICE_QUALIFIER 14 -#define SET_ADDRESS 13 -#define ENDPOINT_SET_CLEAR_HALT 12 -#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11 -#define GET_STRING_DESCRIPTOR_2 10 -#define GET_STRING_DESCRIPTOR_1 9 -#define GET_STRING_DESCRIPTOR_0 8 -#define GET_SET_INTERFACE 6 -#define GET_SET_CONFIGURATION 5 -#define GET_CONFIGURATION_DESCRIPTOR 4 -#define GET_DEVICE_DESCRIPTOR 3 -#define GET_ENDPOINT_STATUS 2 -#define GET_INTERFACE_STATUS 1 -#define GET_DEVICE_STATUS 0 - u32 prodvendid; -#define PRODUCT_ID 16 -#define VENDOR_ID 0 - u32 relnum; - u32 usbctl; -#define SERIAL_NUMBER_INDEX 16 -#define PRODUCT_ID_STRING_ENABLE 13 -#define VENDOR_ID_STRING_ENABLE 12 -#define USB_ROOT_PORT_WAKEUP_ENABLE 11 -#define VBUS_PIN 10 -#define TIMED_DISCONNECT 9 -#define SUSPEND_IMMEDIATELY 7 -#define SELF_POWERED_USB_DEVICE 6 -#define REMOTE_WAKEUP_SUPPORT 5 -#define PME_POLARITY 4 -#define USB_DETECT_ENABLE 3 -#define PME_WAKEUP_ENABLE 2 -#define DEVICE_REMOTE_WAKEUP_ENABLE 1 -#define SELF_POWERED_STATUS 0 - /* offset 0x0090 */ - u32 usbstat; -#define HIGH_SPEED 7 -#define FULL_SPEED 6 -#define GENERATE_RESUME 5 -#define GENERATE_DEVICE_REMOTE_WAKEUP 4 - u32 xcvrdiag; -#define FORCE_HIGH_SPEED_MODE 31 -#define FORCE_FULL_SPEED_MODE 30 -#define USB_TEST_MODE 24 -#define LINE_STATE 16 -#define TRANSCEIVER_OPERATION_MODE 2 -#define TRANSCEIVER_SELECT 1 -#define TERMINATION_SELECT 0 - u32 setup0123; - u32 setup4567; - /* offset 0x0090 */ - u32 _unused0; - u32 ouraddr; -#define FORCE_IMMEDIATE 7 -#define OUR_USB_ADDRESS 0 - u32 ourconfig; -} __attribute__ ((packed)); - -/* pci control, BAR0 + 0x0100 */ -struct net2280_pci_regs { - /* offset 0x0100 */ - u32 pcimstctl; -#define PCI_ARBITER_PARK_SELECT 13 -#define PCI_MULTI LEVEL_ARBITER 12 -#define PCI_RETRY_ABORT_ENABLE 11 -#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10 -#define DMA_READ_MULTIPLE_ENABLE 9 -#define DMA_READ_LINE_ENABLE 8 -#define PCI_MASTER_COMMAND_SELECT 6 -#define MEM_READ_OR_WRITE 0 -#define IO_READ_OR_WRITE 1 -#define CFG_READ_OR_WRITE 2 -#define PCI_MASTER_START 5 -#define PCI_MASTER_READ_WRITE 4 -#define PCI_MASTER_WRITE 0 -#define PCI_MASTER_READ 1 -#define PCI_MASTER_BYTE_WRITE_ENABLES 0 - u32 pcimstaddr; - u32 pcimstdata; - u32 pcimststat; -#define PCI_ARBITER_CLEAR 2 -#define PCI_EXTERNAL_ARBITER 1 -#define PCI_HOST_MODE 0 -} __attribute__ ((packed)); - -/* dma control, BAR0 + 0x0180 ... array of four structs like this, - * for channels 0..3. see also struct net2280_dma: descriptor - * that can be loaded into some of these registers. - */ -struct net2280_dma_regs { /* [11.7] */ - /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */ - u32 dmactl; -#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25 -#define DMA_CLEAR_COUNT_ENABLE 21 -#define DESCRIPTOR_POLLING_RATE 19 -#define POLL_CONTINUOUS 0 -#define POLL_1_USEC 1 -#define POLL_100_USEC 2 -#define POLL_1_MSEC 3 -#define DMA_VALID_BIT_POLLING_ENABLE 18 -#define DMA_VALID_BIT_ENABLE 17 -#define DMA_SCATTER_GATHER_ENABLE 16 -#define DMA_OUT_AUTO_START_ENABLE 4 -#define DMA_PREEMPT_ENABLE 3 -#define DMA_FIFO_VALIDATE 2 -#define DMA_ENABLE 1 -#define DMA_ADDRESS_HOLD 0 - u32 dmastat; -#define DMA_ABORT_DONE_INTERRUPT 27 -#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25 -#define DMA_TRANSACTION_DONE_INTERRUPT 24 -#define DMA_ABORT 1 -#define DMA_START 0 - u32 _unused0 [2]; - /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */ - u32 dmacount; -#define VALID_BIT 31 -#define DMA_DIRECTION 30 -#define DMA_DONE_INTERRUPT_ENABLE 29 -#define END_OF_CHAIN 28 -#define DMA_BYTE_COUNT_MASK ((1<<24)-1) -#define DMA_BYTE_COUNT 0 - u32 dmaaddr; - u32 dmadesc; - u32 _unused1; -} __attribute__ ((packed)); - -/* dedicated endpoint registers, BAR0 + 0x0200 */ - -struct net2280_dep_regs { /* [11.8] */ - /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */ - u32 dep_cfg; - /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */ - u32 dep_rsp; - u32 _unused [2]; -} __attribute__ ((packed)); - -/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs - * like this, for ep0 then the configurable endpoints A..F - * ep0 reserved for control; E and F have only 64 bytes of fifo - */ -struct net2280_ep_regs { /* [11.9] */ - /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */ - u32 ep_cfg; -#define ENDPOINT_BYTE_COUNT 16 -#define ENDPOINT_ENABLE 10 -#define ENDPOINT_TYPE 8 -#define ENDPOINT_DIRECTION 7 -#define ENDPOINT_NUMBER 0 - u32 ep_rsp; -#define SET_NAK_OUT_PACKETS 15 -#define SET_EP_HIDE_STATUS_PHASE 14 -#define SET_EP_FORCE_CRC_ERROR 13 -#define SET_INTERRUPT_MODE 12 -#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11 -#define SET_NAK_OUT_PACKETS_MODE 10 -#define SET_ENDPOINT_TOGGLE 9 -#define SET_ENDPOINT_HALT 8 -#define CLEAR_NAK_OUT_PACKETS 7 -#define CLEAR_EP_HIDE_STATUS_PHASE 6 -#define CLEAR_EP_FORCE_CRC_ERROR 5 -#define CLEAR_INTERRUPT_MODE 4 -#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3 -#define CLEAR_NAK_OUT_PACKETS_MODE 2 -#define CLEAR_ENDPOINT_TOGGLE 1 -#define CLEAR_ENDPOINT_HALT 0 - u32 ep_irqenb; -#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6 -#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5 -#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 -#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 -#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1 -#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 - u32 ep_stat; -#define FIFO_VALID_COUNT 24 -#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22 -#define TIMEOUT 21 -#define USB_STALL_SENT 20 -#define USB_IN_NAK_SENT 19 -#define USB_IN_ACK_RCVD 18 -#define USB_OUT_PING_NAK_SENT 17 -#define USB_OUT_ACK_SENT 16 -#define FIFO_OVERFLOW 13 -#define FIFO_UNDERFLOW 12 -#define FIFO_FULL 11 -#define FIFO_EMPTY 10 -#define FIFO_FLUSH 9 -#define SHORT_PACKET_OUT_DONE_INTERRUPT 6 -#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5 -#define NAK_OUT_PACKETS 4 -#define DATA_PACKET_RECEIVED_INTERRUPT 3 -#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 -#define DATA_OUT_PING_TOKEN_INTERRUPT 1 -#define DATA_IN_TOKEN_INTERRUPT 0 - /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */ - u32 ep_avail; - u32 ep_data; - u32 _unused0 [2]; -} __attribute__ ((packed)); - -#endif /* __LINUX_USB_NET2280_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/otg.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/otg.h.svn-base deleted file mode 100644 index 94df4fe6..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/otg.h.svn-base +++ /dev/null @@ -1,136 +0,0 @@ -/* USB OTG (On The Go) defines */ -/* - * - * These APIs may be used between USB controllers. USB device drivers - * (for either host or peripheral roles) don't use these calls; they - * continue to use just usb_device and usb_gadget. - */ - -#ifndef __LINUX_USB_OTG_H -#define __LINUX_USB_OTG_H - -/* OTG defines lots of enumeration states before device reset */ -enum usb_otg_state { - OTG_STATE_UNDEFINED = 0, - - /* single-role peripheral, and dual-role default-b */ - OTG_STATE_B_IDLE, - OTG_STATE_B_SRP_INIT, - OTG_STATE_B_PERIPHERAL, - - /* extra dual-role default-b states */ - OTG_STATE_B_WAIT_ACON, - OTG_STATE_B_HOST, - - /* dual-role default-a */ - OTG_STATE_A_IDLE, - OTG_STATE_A_WAIT_VRISE, - OTG_STATE_A_WAIT_BCON, - OTG_STATE_A_HOST, - OTG_STATE_A_SUSPEND, - OTG_STATE_A_PERIPHERAL, - OTG_STATE_A_WAIT_VFALL, - OTG_STATE_A_VBUS_ERR, -}; - -/* - * the otg driver needs to interact with both device side and host side - * usb controllers. it decides which controller is active at a given - * moment, using the transceiver, ID signal, HNP and sometimes static - * configuration information (including "board isn't wired for otg"). - */ -struct otg_transceiver { - struct device *dev; - const char *label; - - u8 default_a; - enum usb_otg_state state; - - struct usb_bus *host; - struct usb_gadget *gadget; - - /* to pass extra port status to the root hub */ - u16 port_status; - u16 port_change; - - /* bind/unbind the host controller */ - int (*set_host)(struct otg_transceiver *otg, - struct usb_bus *host); - - /* bind/unbind the peripheral controller */ - int (*set_peripheral)(struct otg_transceiver *otg, - struct usb_gadget *gadget); - - /* effective for B devices, ignored for A-peripheral */ - int (*set_power)(struct otg_transceiver *otg, - unsigned mA); - - /* for non-OTG B devices: set transceiver into suspend mode */ - int (*set_suspend)(struct otg_transceiver *otg, - int suspend); - - /* for B devices only: start session with A-Host */ - int (*start_srp)(struct otg_transceiver *otg); - - /* start or continue HNP role switch */ - int (*start_hnp)(struct otg_transceiver *otg); - -}; - - -/* for board-specific init logic */ -extern int otg_set_transceiver(struct otg_transceiver *); - - -/* for usb host and peripheral controller drivers */ -extern struct otg_transceiver *otg_get_transceiver(void); -extern void otg_put_transceiver(struct otg_transceiver *); - -static inline int -otg_start_hnp(struct otg_transceiver *otg) -{ - return otg->start_hnp(otg); -} - - -/* for HCDs */ -static inline int -otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) -{ - return otg->set_host(otg, host); -} - - -/* for usb peripheral controller drivers */ -static inline int -otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph) -{ - return otg->set_peripheral(otg, periph); -} - -static inline int -otg_set_power(struct otg_transceiver *otg, unsigned mA) -{ - return otg->set_power(otg, mA); -} - -static inline int -otg_set_suspend(struct otg_transceiver *otg, int suspend) -{ - if (otg->set_suspend != NULL) - return otg->set_suspend(otg, suspend); - else - return 0; -} - -static inline int -otg_start_srp(struct otg_transceiver *otg) -{ - return otg->start_srp(otg); -} - - -/* for OTG controller drivers (and maybe other stuff) */ -extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); - -#endif /* __LINUX_USB_OTG_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/quirks.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/quirks.h.svn-base deleted file mode 100644 index 7f6c603d..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/quirks.h.svn-base +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file holds the definitions of quirks found in USB devices. - * Only quirks that affect the whole device, not an interface, - * belong here. - */ - -#ifndef __LINUX_USB_QUIRKS_H -#define __LINUX_USB_QUIRKS_H - -/* string descriptors must not be fetched using a 255-byte read */ -#define USB_QUIRK_STRING_FETCH_255 0x00000001 - -/* device can't resume correctly so reset it instead */ -#define USB_QUIRK_RESET_RESUME 0x00000002 - -/* device can't handle Set-Interface requests */ -#define USB_QUIRK_NO_SET_INTF 0x00000004 - -#endif /* __LINUX_USB_QUIRKS_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/rndis_host.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/rndis_host.h.svn-base deleted file mode 100644 index 0a6e6d4b..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/rndis_host.h.svn-base +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Host Side support for RNDIS Networking Links - * Copyright (C) 2005 by David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_RNDIS_HOST_H -#define __LINUX_USB_RNDIS_HOST_H - -/* - * CONTROL uses CDC "encapsulated commands" with funky notifications. - * - control-out: SEND_ENCAPSULATED - * - interrupt-in: RESPONSE_AVAILABLE - * - control-in: GET_ENCAPSULATED - * - * We'll try to ignore the RESPONSE_AVAILABLE notifications. - * - * REVISIT some RNDIS implementations seem to have curious issues still - * to be resolved. - */ -struct rndis_msg_hdr { - __le32 msg_type; /* RNDIS_MSG_* */ - __le32 msg_len; - // followed by data that varies between messages - __le32 request_id; - __le32 status; - // ... and more -} __attribute__ ((packed)); - -/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */ -#define CONTROL_BUFFER_SIZE 1025 - -/* RNDIS defines an (absurdly huge) 10 second control timeout, - * but ActiveSync seems to use a more usual 5 second timeout - * (which matches the USB 2.0 spec). - */ -#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000) - - -#define ccpu2 __constant_cpu_to_le32 - -#define RNDIS_MSG_COMPLETION ccpu2(0x80000000) - -/* codes for "msg_type" field of rndis messages; - * only the data channel uses packet messages (maybe batched); - * everything else goes on the control channel. - */ -#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */ -#define RNDIS_MSG_INIT ccpu2(0x00000002) -#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_HALT ccpu2(0x00000003) -#define RNDIS_MSG_QUERY ccpu2(0x00000004) -#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_SET ccpu2(0x00000005) -#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_RESET ccpu2(0x00000006) -#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION) -#define RNDIS_MSG_INDICATE ccpu2(0x00000007) -#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008) -#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) - -/* codes for "status" field of completion messages */ -#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000) -#define RNDIS_STATUS_FAILURE ccpu2(0xc0000001) -#define RNDIS_STATUS_INVALID_DATA ccpu2(0xc0010015) -#define RNDIS_STATUS_NOT_SUPPORTED ccpu2(0xc00000bb) -#define RNDIS_STATUS_MEDIA_CONNECT ccpu2(0x4001000b) -#define RNDIS_STATUS_MEDIA_DISCONNECT ccpu2(0x4001000c) - -/* codes for OID_GEN_PHYSICAL_MEDIUM */ -#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED ccpu2(0x00000000) -#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN ccpu2(0x00000001) -#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM ccpu2(0x00000002) -#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE ccpu2(0x00000003) -#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE ccpu2(0x00000004) -#define RNDIS_PHYSICAL_MEDIUM_DSL ccpu2(0x00000005) -#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL ccpu2(0x00000006) -#define RNDIS_PHYSICAL_MEDIUM_1394 ccpu2(0x00000007) -#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN ccpu2(0x00000008) -#define RNDIS_PHYSICAL_MEDIUM_MAX ccpu2(0x00000009) - -struct rndis_data_hdr { - __le32 msg_type; /* RNDIS_MSG_PACKET */ - __le32 msg_len; // rndis_data_hdr + data_len + pad - __le32 data_offset; // 36 -- right after header - __le32 data_len; // ... real packet size - - __le32 oob_data_offset; // zero - __le32 oob_data_len; // zero - __le32 num_oob; // zero - __le32 packet_data_offset; // zero - - __le32 packet_data_len; // zero - __le32 vc_handle; // zero - __le32 reserved; // zero -} __attribute__ ((packed)); - -struct rndis_init { /* OUT */ - // header and: - __le32 msg_type; /* RNDIS_MSG_INIT */ - __le32 msg_len; // 24 - __le32 request_id; - __le32 major_version; // of rndis (1.0) - __le32 minor_version; - __le32 max_transfer_size; -} __attribute__ ((packed)); - -struct rndis_init_c { /* IN */ - // header and: - __le32 msg_type; /* RNDIS_MSG_INIT_C */ - __le32 msg_len; - __le32 request_id; - __le32 status; - __le32 major_version; // of rndis (1.0) - __le32 minor_version; - __le32 device_flags; - __le32 medium; // zero == 802.3 - __le32 max_packets_per_message; - __le32 max_transfer_size; - __le32 packet_alignment; // max 7; (1<<n) bytes - __le32 af_list_offset; // zero - __le32 af_list_size; // zero -} __attribute__ ((packed)); - -struct rndis_halt { /* OUT (no reply) */ - // header and: - __le32 msg_type; /* RNDIS_MSG_HALT */ - __le32 msg_len; - __le32 request_id; -} __attribute__ ((packed)); - -struct rndis_query { /* OUT */ - // header and: - __le32 msg_type; /* RNDIS_MSG_QUERY */ - __le32 msg_len; - __le32 request_id; - __le32 oid; - __le32 len; - __le32 offset; -/*?*/ __le32 handle; // zero -} __attribute__ ((packed)); - -struct rndis_query_c { /* IN */ - // header and: - __le32 msg_type; /* RNDIS_MSG_QUERY_C */ - __le32 msg_len; - __le32 request_id; - __le32 status; - __le32 len; - __le32 offset; -} __attribute__ ((packed)); - -struct rndis_set { /* OUT */ - // header and: - __le32 msg_type; /* RNDIS_MSG_SET */ - __le32 msg_len; - __le32 request_id; - __le32 oid; - __le32 len; - __le32 offset; -/*?*/ __le32 handle; // zero -} __attribute__ ((packed)); - -struct rndis_set_c { /* IN */ - // header and: - __le32 msg_type; /* RNDIS_MSG_SET_C */ - __le32 msg_len; - __le32 request_id; - __le32 status; -} __attribute__ ((packed)); - -struct rndis_reset { /* IN */ - // header and: - __le32 msg_type; /* RNDIS_MSG_RESET */ - __le32 msg_len; - __le32 reserved; -} __attribute__ ((packed)); - -struct rndis_reset_c { /* OUT */ - // header and: - __le32 msg_type; /* RNDIS_MSG_RESET_C */ - __le32 msg_len; - __le32 status; - __le32 addressing_lost; -} __attribute__ ((packed)); - -struct rndis_indicate { /* IN (unrequested) */ - // header and: - __le32 msg_type; /* RNDIS_MSG_INDICATE */ - __le32 msg_len; - __le32 status; - __le32 length; - __le32 offset; -/**/ __le32 diag_status; - __le32 error_offset; -/**/ __le32 message; -} __attribute__ ((packed)); - -struct rndis_keepalive { /* OUT (optionally IN) */ - // header and: - __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */ - __le32 msg_len; - __le32 request_id; -} __attribute__ ((packed)); - -struct rndis_keepalive_c { /* IN (optionally OUT) */ - // header and: - __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */ - __le32 msg_len; - __le32 request_id; - __le32 status; -} __attribute__ ((packed)); - -/* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and - * there are gobs more that may optionally be supported. We'll avoid as much - * of that mess as possible. - */ -#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101) -#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106) -#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e) -#define OID_GEN_PHYSICAL_MEDIUM ccpu2(0x00010202) - -/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */ -#define RNDIS_PACKET_TYPE_DIRECTED ccpu2(0x00000001) -#define RNDIS_PACKET_TYPE_MULTICAST ccpu2(0x00000002) -#define RNDIS_PACKET_TYPE_ALL_MULTICAST ccpu2(0x00000004) -#define RNDIS_PACKET_TYPE_BROADCAST ccpu2(0x00000008) -#define RNDIS_PACKET_TYPE_SOURCE_ROUTING ccpu2(0x00000010) -#define RNDIS_PACKET_TYPE_PROMISCUOUS ccpu2(0x00000020) -#define RNDIS_PACKET_TYPE_SMT ccpu2(0x00000040) -#define RNDIS_PACKET_TYPE_ALL_LOCAL ccpu2(0x00000080) -#define RNDIS_PACKET_TYPE_GROUP ccpu2(0x00001000) -#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL ccpu2(0x00002000) -#define RNDIS_PACKET_TYPE_FUNCTIONAL ccpu2(0x00004000) -#define RNDIS_PACKET_TYPE_MAC_FRAME ccpu2(0x00008000) - -/* default filter used with RNDIS devices */ -#define RNDIS_DEFAULT_FILTER ( \ - RNDIS_PACKET_TYPE_DIRECTED | \ - RNDIS_PACKET_TYPE_BROADCAST | \ - RNDIS_PACKET_TYPE_ALL_MULTICAST | \ - RNDIS_PACKET_TYPE_PROMISCUOUS) - -/* Flags to require specific physical medium type for generic_rndis_bind() */ -#define FLAG_RNDIS_PHYM_NOT_WIRELESS 0x0001 -#define FLAG_RNDIS_PHYM_WIRELESS 0x0002 - - -extern void rndis_status(struct usbnet *dev, struct urb *urb); -extern int -rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen); -extern int -generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags); -extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf); -extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb); -extern struct sk_buff * -rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); - -#endif /* __LINUX_USB_RNDIS_HOST_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/serial.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/serial.h.svn-base deleted file mode 100644 index 0b8617a9..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/serial.h.svn-base +++ /dev/null @@ -1,330 +0,0 @@ -/* - * USB Serial Converter stuff - * - * Copyright (C) 1999 - 2005 - * Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - */ - -#ifndef __LINUX_USB_SERIAL_H -#define __LINUX_USB_SERIAL_H - -#include <linux/kref.h> -#include <linux/mutex.h> - -#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ -#define SERIAL_TTY_MINORS 254 /* loads of devices :) */ -#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ - -/* The maximum number of ports one device can grab at once */ -#define MAX_NUM_PORTS 8 - -/* parity check flag */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -/** - * usb_serial_port: structure for the specific ports of a device. - * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. - * @lock: spinlock to grab when updating portions of this structure. - * @mutex: mutex used to synchronize serial_open() and serial_close() - * access for this port. - * @number: the number of the port (the minor number). - * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. - * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. - * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe - * for this port. - * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. - * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. - * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. - * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe - * for this port. - * @bulk_in_buffer: pointer to the bulk in buffer for this port. - * @read_urb: pointer to the bulk in struct urb for this port. - * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this - * port. - * @bulk_out_buffer: pointer to the bulk out buffer for this port. - * @bulk_out_size: the size of the bulk_out_buffer, in bytes. - * @write_urb: pointer to the bulk out struct urb for this port. - * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this - * port. - * @write_wait: a wait_queue_head_t used by the port. - * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. - * @throttled: nonzero if the read urb is inactive to throttle the device - * @throttle_req: nonzero if the tty wants to throttle us - * - * This structure is used by the usb-serial core and drivers for the specific - * ports of a device. - */ -struct usb_serial_port { - struct usb_serial *serial; - struct tty_port port; - spinlock_t lock; - struct mutex mutex; - unsigned char number; - - unsigned char *interrupt_in_buffer; - struct urb *interrupt_in_urb; - __u8 interrupt_in_endpointAddress; - - unsigned char *interrupt_out_buffer; - int interrupt_out_size; - struct urb *interrupt_out_urb; - __u8 interrupt_out_endpointAddress; - - unsigned char *bulk_in_buffer; - int bulk_in_size; - struct urb *read_urb; - __u8 bulk_in_endpointAddress; - - unsigned char *bulk_out_buffer; - int bulk_out_size; - struct urb *write_urb; - int write_urb_busy; - __u8 bulk_out_endpointAddress; - - wait_queue_head_t write_wait; - struct work_struct work; - char throttled; - char throttle_req; - char console; - struct device dev; -}; -#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) - -/* get and set the port private data pointer helper functions */ -static inline void *usb_get_serial_port_data(struct usb_serial_port *port) -{ - return dev_get_drvdata(&port->dev); -} - -static inline void usb_set_serial_port_data(struct usb_serial_port *port, - void *data) -{ - dev_set_drvdata(&port->dev, data); -} - -/** - * usb_serial - structure used by the usb-serial core for a device - * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_driver for this device - * @interface: pointer to the struct usb_interface for this device - * @minor: the starting minor number for this device - * @num_ports: the number of ports this device has - * @num_interrupt_in: number of interrupt in endpoints we have - * @num_interrupt_out: number of interrupt out endpoints we have - * @num_bulk_in: number of bulk in endpoints we have - * @num_bulk_out: number of bulk out endpoints we have - * @port: array of struct usb_serial_port structures for the different ports. - * @private: place to put any driver specific information that is needed. The - * usb-serial driver is required to manage this data, the usb-serial core - * will not touch this. Use usb_get_serial_data() and - * usb_set_serial_data() to access this. - */ -struct usb_serial { - struct usb_device *dev; - struct usb_serial_driver *type; - struct usb_interface *interface; - unsigned char disconnected; - unsigned char minor; - unsigned char num_ports; - unsigned char num_port_pointers; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; - struct usb_serial_port *port[MAX_NUM_PORTS]; - struct kref kref; - struct mutex disc_mutex; - void *private; -}; -#define to_usb_serial(d) container_of(d, struct usb_serial, kref) - -/* get and set the serial private data pointer helper functions */ -static inline void *usb_get_serial_data(struct usb_serial *serial) -{ - return serial->private; -} - -static inline void usb_set_serial_data(struct usb_serial *serial, void *data) -{ - serial->private = data; -} - -/** - * usb_serial_driver - describes a usb serial driver - * @description: pointer to a string that describes this driver. This string - * used in the syslog messages when a device is inserted or removed. - * @id_table: pointer to a list of usb_device_id structures that define all - * of the devices this structure can support. - * @num_ports: the number of different ports this device will have. - * @calc_num_ports: pointer to a function to determine how many ports this - * device has dynamically. It will be called after the probe() - * callback is called, but before attach() - * @probe: pointer to the driver's probe function. - * This will be called when the device is inserted into the system, - * but before the device has been fully initialized by the usb_serial - * subsystem. Use this function to download any firmware to the device, - * or any other early initialization that might be needed. - * Return 0 to continue on with the initialization sequence. Anything - * else will abort it. - * @attach: pointer to the driver's attach function. - * This will be called when the struct usb_serial structure is fully set - * set up. Do any local initialization of the device, or any private - * memory structure allocation at this point in time. - * @shutdown: pointer to the driver's shutdown function. This will be - * called when the device is removed from the system. - * @usb_driver: pointer to the struct usb_driver that controls this - * device. This is necessary to allow dynamic ids to be added to - * the driver from sysfs. - * - * This structure is defines a USB Serial driver. It provides all of - * the information that the USB serial core code needs. If the function - * pointers are defined, then the USB serial core code will call them when - * the corresponding tty port functions are called. If they are not - * called, the generic serial function will be used instead. - * - * The driver.owner field should be set to the module owner of this driver. - * The driver.name field should be set to the name of this driver (remember - * it will show up in sysfs, so it needs to be short and to the point. - * Using the module name is a good idea.) - */ -struct usb_serial_driver { - const char *description; - const struct usb_device_id *id_table; - char num_ports; - - struct list_head driver_list; - struct device_driver driver; - struct usb_driver *usb_driver; - struct usb_dynids dynids; - - int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); - int (*attach)(struct usb_serial *serial); - int (*calc_num_ports) (struct usb_serial *serial); - - void (*shutdown)(struct usb_serial *serial); - - int (*port_probe)(struct usb_serial_port *port); - int (*port_remove)(struct usb_serial_port *port); - - int (*suspend)(struct usb_serial *serial, pm_message_t message); - int (*resume)(struct usb_serial *serial); - - /* serial function calls */ - /* Called by console with tty = NULL and by tty */ - int (*open)(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); - void (*close)(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); - int (*write)(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); - /* Called only by the tty layer */ - int (*write_room)(struct tty_struct *tty); - int (*ioctl)(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old); - void (*break_ctl)(struct tty_struct *tty, int break_state); - int (*chars_in_buffer)(struct tty_struct *tty); - void (*throttle)(struct tty_struct *tty); - void (*unthrottle)(struct tty_struct *tty); - int (*tiocmget)(struct tty_struct *tty, struct file *file); - int (*tiocmset)(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); - /* USB events */ - void (*read_int_callback)(struct urb *urb); - void (*write_int_callback)(struct urb *urb); - void (*read_bulk_callback)(struct urb *urb); - void (*write_bulk_callback)(struct urb *urb); -}; -#define to_usb_serial_driver(d) \ - container_of(d, struct usb_serial_driver, driver) - -extern int usb_serial_register(struct usb_serial_driver *driver); -extern void usb_serial_deregister(struct usb_serial_driver *driver); -extern void usb_serial_port_softint(struct usb_serial_port *port); - -extern int usb_serial_probe(struct usb_interface *iface, - const struct usb_device_id *id); -extern void usb_serial_disconnect(struct usb_interface *iface); - -extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); -extern int usb_serial_resume(struct usb_interface *intf); - -extern int ezusb_writememory(struct usb_serial *serial, int address, - unsigned char *data, int length, __u8 bRequest); -extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); - -/* USB Serial console functions */ -#ifdef CONFIG_USB_SERIAL_CONSOLE -extern void usb_serial_console_init(int debug, int minor); -extern void usb_serial_console_exit(void); -extern void usb_serial_console_disconnect(struct usb_serial *serial); -#else -static inline void usb_serial_console_init(int debug, int minor) { } -static inline void usb_serial_console_exit(void) { } -static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} -#endif - -/* Functions needed by other parts of the usbserial core */ -extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); -extern void usb_serial_put(struct usb_serial *serial); -extern int usb_serial_generic_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); -extern int usb_serial_generic_write(struct tty_struct *tty, - struct usb_serial_port *port, const unsigned char *buf, int count); -extern void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); -extern int usb_serial_generic_resume(struct usb_serial *serial); -extern int usb_serial_generic_write_room(struct tty_struct *tty); -extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); -extern void usb_serial_generic_read_bulk_callback(struct urb *urb); -extern void usb_serial_generic_write_bulk_callback(struct urb *urb); -extern void usb_serial_generic_throttle(struct tty_struct *tty); -extern void usb_serial_generic_unthrottle(struct tty_struct *tty); -extern void usb_serial_generic_shutdown(struct usb_serial *serial); -extern int usb_serial_generic_register(int debug); -extern void usb_serial_generic_deregister(void); - -extern int usb_serial_bus_register(struct usb_serial_driver *device); -extern void usb_serial_bus_deregister(struct usb_serial_driver *device); - -extern struct usb_serial_driver usb_serial_generic_device; -extern struct bus_type usb_serial_bus_type; -extern struct tty_driver *usb_serial_tty_driver; - -static inline void usb_serial_debug_data(int debug, - struct device *dev, - const char *function, int size, - const unsigned char *data) -{ - int i; - - if (debug) { - dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", - function, size); - for (i = 0; i < size; ++i) - printk("%.2x ", data[i]); - printk("\n"); - } -} - -/* Use our own dbg macro */ -#undef dbg -#define dbg(format, arg...) \ - do { \ - if (debug) \ - printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , \ - ## arg); \ - } while (0) - - - -#endif /* __LINUX_USB_SERIAL_H */ - diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/sl811.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/sl811.h.svn-base deleted file mode 100644 index 3afe4d16..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/sl811.h.svn-base +++ /dev/null @@ -1,29 +0,0 @@ -/* - * board initialization should put one of these into dev->platform_data - * and place the sl811hs onto platform_bus named "sl811-hcd". - */ - -#ifndef __LINUX_USB_SL811_H -#define __LINUX_USB_SL811_H - -struct sl811_platform_data { - unsigned can_wakeup:1; - - /* given port_power, msec/2 after power on till power good */ - u8 potpg; - - /* mA/2 power supplied on this port (max = default = 250) */ - u8 power; - - /* sl811 relies on an external source of VBUS current */ - void (*port_power)(struct device *dev, int is_on); - - /* pulse sl811 nRST (probably with a GPIO) */ - void (*reset)(struct device *dev); - - /* some boards need something like these: */ - /* int (*check_overcurrent)(struct device *dev); */ - /* void (*clock_enable)(struct device *dev, int is_on); */ -}; - -#endif /* __LINUX_USB_SL811_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/tmc.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/tmc.h.svn-base deleted file mode 100644 index c045ae12..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/tmc.h.svn-base +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany - * Copyright (C) 2008 Novell, Inc. - * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> - * - * This file holds USB constants defined by the USB Device Class - * Definition for Test and Measurement devices published by the USB-IF. - * - * It also has the ioctl definitions for the usbtmc kernel driver that - * userspace needs to know about. - */ - -#ifndef __LINUX_USB_TMC_H -#define __LINUX_USB_TMC_H - -/* USB TMC status values */ -#define USBTMC_STATUS_SUCCESS 0x01 -#define USBTMC_STATUS_PENDING 0x02 -#define USBTMC_STATUS_FAILED 0x80 -#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 -#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 -#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 - -/* USB TMC requests values */ -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 -#define USBTMC_REQUEST_INITIATE_CLEAR 5 -#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 -#define USBTMC_REQUEST_GET_CAPABILITIES 7 -#define USBTMC_REQUEST_INDICATOR_PULSE 64 - -/* Request values for USBTMC driver's ioctl entry point */ -#define USBTMC_IOC_NR 91 -#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) -#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) -#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) -#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) -#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) -#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) - -#endif diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/usbnet.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/usbnet.h.svn-base deleted file mode 100644 index 7d382224..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/usbnet.h.svn-base +++ /dev/null @@ -1,214 +0,0 @@ -/* - * USB Networking Link Interface - * - * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net> - * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_USBNET_H -#define __LINUX_USB_USBNET_H - -/* interface from usbnet core to each USB networking link we handle */ -struct usbnet { - /* housekeeping */ - struct usb_device *udev; - struct usb_interface *intf; - struct driver_info *driver_info; - const char *driver_name; - void *driver_priv; - wait_queue_head_t *wait; - struct mutex phy_mutex; - unsigned char suspend_count; - - /* i/o info: pipes etc */ - unsigned in, out; - struct usb_host_endpoint *status; - unsigned maxpacket; - struct timer_list delay; - - /* protocol/interface state */ - struct net_device *net; - struct net_device_stats stats; - int msg_enable; - unsigned long data [5]; - u32 xid; - u32 hard_mtu; /* count any extra framing */ - size_t rx_urb_size; /* size for rx urbs */ - struct mii_if_info mii; - - /* various kinds of pending driver work */ - struct sk_buff_head rxq; - struct sk_buff_head txq; - struct sk_buff_head done; - struct urb *interrupt; - struct tasklet_struct bh; - - struct work_struct kevent; - unsigned long flags; -# define EVENT_TX_HALT 0 -# define EVENT_RX_HALT 1 -# define EVENT_RX_MEMORY 2 -# define EVENT_STS_SPLIT 3 -# define EVENT_LINK_RESET 4 -}; - -static inline struct usb_driver *driver_of(struct usb_interface *intf) -{ - return to_usb_driver(intf->dev.driver); -} - -/* interface from the device/framing level "minidriver" to core */ -struct driver_info { - char *description; - - int flags; -/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */ -#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */ -#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */ -#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */ -#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */ - -#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */ -#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ - -#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ -#define FLAG_WLAN 0x0080 /* use "wlan%d" names */ - - - /* init device ... can sleep, or cause probe() failure */ - int (*bind)(struct usbnet *, struct usb_interface *); - - /* cleanup device ... can sleep, but can't fail */ - void (*unbind)(struct usbnet *, struct usb_interface *); - - /* reset device ... can sleep */ - int (*reset)(struct usbnet *); - - /* see if peer is connected ... can sleep */ - int (*check_connect)(struct usbnet *); - - /* for status polling */ - void (*status)(struct usbnet *, struct urb *); - - /* link reset handling, called from defer_kevent */ - int (*link_reset)(struct usbnet *); - - /* fixup rx packet (strip framing) */ - int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb); - - /* fixup tx packet (add framing) */ - struct sk_buff *(*tx_fixup)(struct usbnet *dev, - struct sk_buff *skb, gfp_t flags); - - /* early initialization code, can sleep. This is for minidrivers - * having 'subminidrivers' that need to do extra initialization - * right after minidriver have initialized hardware. */ - int (*early_init)(struct usbnet *dev); - - /* called by minidriver when link state changes, state: 0=disconnect, - * 1=connect */ - void (*link_change)(struct usbnet *dev, int state); - - /* for new devices, use the descriptor-reading code instead */ - int in; /* rx endpoint */ - int out; /* tx endpoint */ - - unsigned long data; /* Misc driver specific data */ -}; - -/* Minidrivers are just drivers using the "usbnet" core as a powerful - * network-specific subroutine library ... that happens to do pretty - * much everything except custom framing and chip-specific stuff. - */ -extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *); -extern int usbnet_suspend (struct usb_interface *, pm_message_t ); -extern int usbnet_resume (struct usb_interface *); -extern void usbnet_disconnect(struct usb_interface *); - - -/* Drivers that reuse some of the standard USB CDC infrastructure - * (notably, using multiple interfaces according to the CDC - * union descriptor) get some helper code. - */ -struct cdc_state { - struct usb_cdc_header_desc *header; - struct usb_cdc_union_desc *u; - struct usb_cdc_ether_desc *ether; - struct usb_interface *control; - struct usb_interface *data; -}; - -extern int usbnet_generic_cdc_bind (struct usbnet *, struct usb_interface *); -extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *); - -/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */ -#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ - |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ - |USB_CDC_PACKET_TYPE_PROMISCUOUS \ - |USB_CDC_PACKET_TYPE_DIRECTED) - - -/* we record the state for each of our queued skbs */ -enum skb_state { - illegal = 0, - tx_start, tx_done, - rx_start, rx_done, rx_cleanup -}; - -struct skb_data { /* skb->cb is one of these */ - struct urb *urb; - struct usbnet *dev; - enum skb_state state; - size_t length; -}; - - -extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); -extern void usbnet_defer_kevent (struct usbnet *, int); -extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); -extern void usbnet_unlink_rx_urbs(struct usbnet *); - -extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd); -extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd); -extern u32 usbnet_get_link (struct net_device *net); -extern u32 usbnet_get_msglevel (struct net_device *); -extern void usbnet_set_msglevel (struct net_device *, u32); -extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *); -extern int usbnet_nway_reset(struct net_device *net); - -/* messaging support includes the interface name, so it must not be - * used before it has one ... notably, in minidriver bind() calls. - */ -#ifdef DEBUG -#define devdbg(usbnet, fmt, arg...) \ - printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg) -#else -#define devdbg(usbnet, fmt, arg...) \ - ({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \ - ## arg); 0; }) -#endif - -#define deverr(usbnet, fmt, arg...) \ - printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg) -#define devwarn(usbnet, fmt, arg...) \ - printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg) - -#define devinfo(usbnet, fmt, arg...) \ - printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \ - - -#endif /* __LINUX_USB_USBNET_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/vstusb.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/vstusb.h.svn-base deleted file mode 100644 index 1cfac671..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/vstusb.h.svn-base +++ /dev/null @@ -1,71 +0,0 @@ -/***************************************************************************** - * File: drivers/usb/misc/vstusb.h - * - * Purpose: Support for the bulk USB Vernier Spectrophotometers - * - * Author: EQware Engineering, Inc. - * Oregon City, OR, USA 97045 - * - * Copyright: 2007, 2008 - * Vernier Software & Technology - * Beaverton, OR, USA 97005 - * - * Web: www.vernier.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - *****************************************************************************/ -/***************************************************************************** - * - * The vstusb module is a standard usb 'client' driver running on top of the - * standard usb host controller stack. - * - * In general, vstusb supports standard bulk usb pipes. It supports multiple - * devices and multiple pipes per device. - * - * The vstusb driver supports two interfaces: - * 1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg - * interface to any pipe with timeout support; - * 2 - standard read/write with ioctl config - offers standard read/write - * interface with ioctl configured pipes and timeouts. - * - * Both interfaces can be signal from other process and will abort its i/o - * operation. - * - * A timeout of 0 means NO timeout. The user can still terminate the read via - * signal. - * - * If using multiple threads with this driver, the user should ensure that - * any reads, writes, or ioctls are complete before closing the device. - * Changing read/write timeouts or pipes takes effect on next read/write. - * - *****************************************************************************/ - -struct vstusb_args { - union { - /* this struct is used for IOCTL_VSTUSB_SEND_PIPE, * - * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops */ - struct { - void __user *buffer; - size_t count; - unsigned int timeout_ms; - int pipe; - }; - - /* this one is used for IOCTL_VSTUSB_CONFIG_RW */ - struct { - int rd_pipe; - int rd_timeout_ms; - int wr_pipe; - int wr_timeout_ms; - }; - }; -}; - -#define VST_IOC_MAGIC 'L' -#define VST_IOC_FIRST 0x20 -#define IOCTL_VSTUSB_SEND_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST) -#define IOCTL_VSTUSB_RECV_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1) -#define IOCTL_VSTUSB_CONFIG_RW _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2) diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb-wa.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb-wa.h.svn-base deleted file mode 100644 index fb7c359b..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb-wa.h.svn-base +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Wireless USB Wire Adapter constants and structures. - * - * Copyright (C) 2005-2006 Intel Corporation. - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * FIXME: organize properly, group logically - * - * All the event structures are defined in uwb/spec.h, as they are - * common to the WHCI and WUSB radio control interfaces. - * - * References: - * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8 - */ -#ifndef __LINUX_USB_WUSB_WA_H -#define __LINUX_USB_WUSB_WA_H - -/** - * Radio Command Request for the Radio Control Interface - * - * Radio Control Interface command and event codes are the same as - * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_* - */ -enum { - WA_EXEC_RC_CMD = 40, /* Radio Control command Request */ -}; - -/* Wireless Adapter Requests ([WUSB] table 8-51) */ -enum { - WUSB_REQ_ADD_MMC_IE = 20, - WUSB_REQ_REMOVE_MMC_IE = 21, - WUSB_REQ_SET_NUM_DNTS = 22, - WUSB_REQ_SET_CLUSTER_ID = 23, - WUSB_REQ_SET_DEV_INFO = 24, - WUSB_REQ_GET_TIME = 25, - WUSB_REQ_SET_STREAM_IDX = 26, - WUSB_REQ_SET_WUSB_MAS = 27, - WUSB_REQ_CHAN_STOP = 28, -}; - - -/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */ -enum { - WUSB_TIME_ADJ = 0, - WUSB_TIME_BPST = 1, - WUSB_TIME_WUSB = 2, -}; - -enum { - WA_ENABLE = 0x01, - WA_RESET = 0x02, - RPIPE_PAUSE = 0x1, -}; - -/* Responses from Get Status request ([WUSB] section 8.3.1.6) */ -enum { - WA_STATUS_ENABLED = 0x01, - WA_STATUS_RESETTING = 0x02 -}; - -enum rpipe_crs { - RPIPE_CRS_CTL = 0x01, - RPIPE_CRS_ISO = 0x02, - RPIPE_CRS_BULK = 0x04, - RPIPE_CRS_INTR = 0x08 -}; - -/** - * RPipe descriptor ([WUSB] section 8.5.2.11) - * - * FIXME: explain rpipes - */ -struct usb_rpipe_descriptor { - u8 bLength; - u8 bDescriptorType; - __le16 wRPipeIndex; - __le16 wRequests; - __le16 wBlocks; /* rw if 0 */ - __le16 wMaxPacketSize; /* rw? */ - u8 bHSHubAddress; /* reserved: 0 */ - u8 bHSHubPort; /* ??? FIXME ??? */ - u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */ - u8 bDeviceAddress; /* rw: Target device address */ - u8 bEndpointAddress; /* rw: Target EP address */ - u8 bDataSequence; /* ro: Current Data sequence */ - __le32 dwCurrentWindow; /* ro */ - u8 bMaxDataSequence; /* ro?: max supported seq */ - u8 bInterval; /* rw: */ - u8 bOverTheAirInterval; /* rw: */ - u8 bmAttribute; /* ro? */ - u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */ - u8 bmRetryOptions; /* rw? */ - __le16 wNumTransactionErrors; /* rw */ -} __attribute__ ((packed)); - -/** - * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4) - * - * These are the notifications coming on the notification endpoint of - * an HWA and a DWA. - */ -enum wa_notif_type { - DWA_NOTIF_RWAKE = 0x91, - DWA_NOTIF_PORTSTATUS = 0x92, - WA_NOTIF_TRANSFER = 0x93, - HWA_NOTIF_BPST_ADJ = 0x94, - HWA_NOTIF_DN = 0x95, -}; - -/** - * Wire Adapter notification header - * - * Notifications coming from a wire adapter use a common header - * defined in [WUSB] sections 8.4.5 & 8.5.4. - */ -struct wa_notif_hdr { - u8 bLength; - u8 bNotifyType; /* enum wa_notif_type */ -} __attribute__((packed)); - -/** - * HWA DN Received notification [(WUSB] section 8.5.4.2) - * - * The DNData is specified in WUSB1.0[7.6]. For each device - * notification we received, we just need to dispatch it. - * - * @dndata: this is really an array of notifications, but all start - * with the same header. - */ -struct hwa_notif_dn { - struct wa_notif_hdr hdr; - u8 bSourceDeviceAddr; /* from errata 2005/07 */ - u8 bmAttributes; - struct wusb_dn_hdr dndata[]; -} __attribute__((packed)); - -/* [WUSB] section 8.3.3 */ -enum wa_xfer_type { - WA_XFER_TYPE_CTL = 0x80, - WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */ - WA_XFER_TYPE_ISO = 0x82, - WA_XFER_RESULT = 0x83, - WA_XFER_ABORT = 0x84, -}; - -/* [WUSB] section 8.3.3 */ -struct wa_xfer_hdr { - u8 bLength; /* 0x18 */ - u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */ - __le16 wRPipe; /* RPipe index */ - __le32 dwTransferID; /* Host-assigned ID */ - __le32 dwTransferLength; /* Length of data to xfer */ - u8 bTransferSegment; -} __attribute__((packed)); - -struct wa_xfer_ctl { - struct wa_xfer_hdr hdr; - u8 bmAttribute; - __le16 wReserved; - struct usb_ctrlrequest baSetupData; -} __attribute__((packed)); - -struct wa_xfer_bi { - struct wa_xfer_hdr hdr; - u8 bReserved; - __le16 wReserved; -} __attribute__((packed)); - -struct wa_xfer_hwaiso { - struct wa_xfer_hdr hdr; - u8 bReserved; - __le16 wPresentationTime; - __le32 dwNumOfPackets; - /* FIXME: u8 pktdata[]? */ -} __attribute__((packed)); - -/* [WUSB] section 8.3.3.5 */ -struct wa_xfer_abort { - u8 bLength; - u8 bRequestType; - __le16 wRPipe; /* RPipe index */ - __le32 dwTransferID; /* Host-assigned ID */ -} __attribute__((packed)); - -/** - * WA Transfer Complete notification ([WUSB] section 8.3.3.3) - * - */ -struct wa_notif_xfer { - struct wa_notif_hdr hdr; - u8 bEndpoint; - u8 Reserved; -} __attribute__((packed)); - -/** Transfer result basic codes [WUSB] table 8-15 */ -enum { - WA_XFER_STATUS_SUCCESS, - WA_XFER_STATUS_HALTED, - WA_XFER_STATUS_DATA_BUFFER_ERROR, - WA_XFER_STATUS_BABBLE, - WA_XFER_RESERVED, - WA_XFER_STATUS_NOT_FOUND, - WA_XFER_STATUS_INSUFFICIENT_RESOURCE, - WA_XFER_STATUS_TRANSACTION_ERROR, - WA_XFER_STATUS_ABORTED, - WA_XFER_STATUS_RPIPE_NOT_READY, - WA_XFER_INVALID_FORMAT, - WA_XFER_UNEXPECTED_SEGMENT_NUMBER, - WA_XFER_STATUS_RPIPE_TYPE_MISMATCH, -}; - -/** [WUSB] section 8.3.3.4 */ -struct wa_xfer_result { - struct wa_notif_hdr hdr; - __le32 dwTransferID; - __le32 dwTransferLength; - u8 bTransferSegment; - u8 bTransferStatus; - __le32 dwNumOfPackets; -} __attribute__((packed)); - -/** - * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7). - * - * NOTE: u16 fields are read Little Endian from the hardware. - * - * @bNumPorts is the original max number of devices that the host can - * connect; we might chop this so the stack can handle - * it. In case you need to access it, use wusbhc->ports_max - * if it is a Wireless USB WA. - */ -struct usb_wa_descriptor { - u8 bLength; - u8 bDescriptorType; - u16 bcdWAVersion; - u8 bNumPorts; /* don't use!! */ - u8 bmAttributes; /* Reserved == 0 */ - u16 wNumRPipes; - u16 wRPipeMaxBlock; - u8 bRPipeBlockSize; - u8 bPwrOn2PwrGood; - u8 bNumMMCIEs; - u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */ -} __attribute__((packed)); - -/** - * HWA Device Information Buffer (WUSB1.0[T8.54]) - */ -struct hwa_dev_info { - u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */ - u8 bDeviceAddress; - __le16 wPHYRates; - u8 bmDeviceAttribute; -} __attribute__((packed)); - -#endif /* #ifndef __LINUX_USB_WUSB_WA_H */ diff --git a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb.h.svn-base b/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb.h.svn-base deleted file mode 100644 index 5f401b64..00000000 --- a/libdde_linux26/contrib/include/linux/usb/.svn/text-base/wusb.h.svn-base +++ /dev/null @@ -1,376 +0,0 @@ -/* - * Wireless USB Standard Definitions - * Event Size Tables - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * FIXME: organize properly, group logically - * - * All the event structures are defined in uwb/spec.h, as they are - * common to the WHCI and WUSB radio control interfaces. - */ - -#ifndef __WUSB_H__ -#define __WUSB_H__ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/uwb/spec.h> -#include <linux/usb/ch9.h> -#include <linux/param.h> - -/** - * WUSB Information Element header - * - * I don't know why, they decided to make it different to the MBOA MAC - * IE Header; beats me. - */ -struct wuie_hdr { - u8 bLength; - u8 bIEIdentifier; -} __attribute__((packed)); - -enum { - WUIE_ID_WCTA = 0x80, - WUIE_ID_CONNECTACK, - WUIE_ID_HOST_INFO, - WUIE_ID_CHANGE_ANNOUNCE, - WUIE_ID_DEVICE_DISCONNECT, - WUIE_ID_HOST_DISCONNECT, - WUIE_ID_KEEP_ALIVE = 0x89, - WUIE_ID_ISOCH_DISCARD, - WUIE_ID_RESET_DEVICE, -}; - -/** - * Maximum number of array elements in a WUSB IE. - * - * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that - * are "arrays" have to limited to 4 elements. So we define it - * like that to ease up and submit only the neeed size. - */ -#define WUIE_ELT_MAX 4 - -/** - * Wrapper for the data that defines a CHID, a CDID or a CK - * - * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of - * data. In order to avoid confusion and enforce types, we wrap it. - * - * Make it packed, as we use it in some hw defintions. - */ -struct wusb_ckhdid { - u8 data[16]; -} __attribute__((packed)); - -const static -struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } }; - -#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1) - -/** - * WUSB IE: Host Information (WUSB1.0[7.5.2]) - * - * Used to provide information about the host to the Wireless USB - * devices in range (CHID can be used as an ASCII string). - */ -struct wuie_host_info { - struct wuie_hdr hdr; - __le16 attributes; - struct wusb_ckhdid CHID; -} __attribute__((packed)); - -/** - * WUSB IE: Connect Ack (WUSB1.0[7.5.1]) - * - * Used to acknowledge device connect requests. See note for - * WUIE_ELT_MAX. - */ -struct wuie_connect_ack { - struct wuie_hdr hdr; - struct { - struct wusb_ckhdid CDID; - u8 bDeviceAddress; /* 0 means unused */ - u8 bReserved; - } blk[WUIE_ELT_MAX]; -} __attribute__((packed)); - -/** - * WUSB IE Host Information Element, Connect Availability - * - * WUSB1.0[7.5.2], bmAttributes description - */ -enum { - WUIE_HI_CAP_RECONNECT = 0, - WUIE_HI_CAP_LIMITED, - WUIE_HI_CAP_RESERVED, - WUIE_HI_CAP_ALL, -}; - -/** - * WUSB IE: Channel Stop (WUSB1.0[7.5.8]) - * - * Tells devices the host is going to stop sending MMCs and will dissapear. - */ -struct wuie_channel_stop { - struct wuie_hdr hdr; - u8 attributes; - u8 timestamp[3]; -} __attribute__((packed)); - -/** - * WUSB IE: Keepalive (WUSB1.0[7.5.9]) - * - * Ask device(s) to send keepalives. - */ -struct wuie_keep_alive { - struct wuie_hdr hdr; - u8 bDeviceAddress[WUIE_ELT_MAX]; -} __attribute__((packed)); - -/** - * WUSB IE: Reset device (WUSB1.0[7.5.11]) - * - * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only - * use it for one at the time... - * - * In any case, this request is a wee bit silly: why don't they target - * by address?? - */ -struct wuie_reset { - struct wuie_hdr hdr; - struct wusb_ckhdid CDID; -} __attribute__((packed)); - -/** - * WUSB IE: Disconnect device (WUSB1.0[7.5.11]) - * - * Tell device to disconnect; we can fit 4 addresses, but we only use - * it for one at the time... - */ -struct wuie_disconnect { - struct wuie_hdr hdr; - u8 bDeviceAddress; - u8 padding; -} __attribute__((packed)); - -/** - * WUSB IE: Host disconnect ([WUSB] section 7.5.5) - * - * Tells all connected devices to disconnect. - */ -struct wuie_host_disconnect { - struct wuie_hdr hdr; -} __attribute__((packed)); - -/** - * WUSB Device Notification header (WUSB1.0[7.6]) - */ -struct wusb_dn_hdr { - u8 bType; - u8 notifdata[]; -} __attribute__((packed)); - -/** Device Notification codes (WUSB1.0[Table 7-54]) */ -enum WUSB_DN { - WUSB_DN_CONNECT = 0x01, - WUSB_DN_DISCONNECT = 0x02, - WUSB_DN_EPRDY = 0x03, - WUSB_DN_MASAVAILCHANGED = 0x04, - WUSB_DN_RWAKE = 0x05, - WUSB_DN_SLEEP = 0x06, - WUSB_DN_ALIVE = 0x07, -}; - -/** WUSB Device Notification Connect */ -struct wusb_dn_connect { - struct wusb_dn_hdr hdr; - __le16 attributes; - struct wusb_ckhdid CDID; -} __attribute__((packed)); - -static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn) -{ - return le16_to_cpu(dn->attributes) & 0xff; -} - -static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn) -{ - return (le16_to_cpu(dn->attributes) >> 8) & 0x1; -} - -static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn) -{ - return (le16_to_cpu(dn->attributes) >> 9) & 0x03; -} - -/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */ -struct wusb_dn_alive { - struct wusb_dn_hdr hdr; -} __attribute__((packed)); - -/** Device is disconnecting (WUSB1.0[7.6.2]) */ -struct wusb_dn_disconnect { - struct wusb_dn_hdr hdr; -} __attribute__((packed)); - -/* General constants */ -enum { - WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */ -}; - -static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size, - const struct wusb_ckhdid *ckhdid) -{ - return scnprintf(pr_ckhdid, size, - "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx " - "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx", - ckhdid->data[0], ckhdid->data[1], - ckhdid->data[2], ckhdid->data[3], - ckhdid->data[4], ckhdid->data[5], - ckhdid->data[6], ckhdid->data[7], - ckhdid->data[8], ckhdid->data[9], - ckhdid->data[10], ckhdid->data[11], - ckhdid->data[12], ckhdid->data[13], - ckhdid->data[14], ckhdid->data[15]); -} - -/* - * WUSB Crypto stuff (WUSB1.0[6]) - */ - -extern const char *wusb_et_name(u8); - -/** - * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for - * the host or the device. - */ -static inline u8 wusb_key_index(int index, int type, int originator) -{ - return (originator << 6) | (type << 4) | index; -} - -#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */ -#define WUSB_KEY_INDEX_TYPE_ASSOC 1 -#define WUSB_KEY_INDEX_TYPE_GTK 2 -#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0 -#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1 - -/* A CCM Nonce, defined in WUSB1.0[6.4.1] */ -struct aes_ccm_nonce { - u8 sfn[6]; /* Little Endian */ - u8 tkid[3]; /* LE */ - struct uwb_dev_addr dest_addr; - struct uwb_dev_addr src_addr; -} __attribute__((packed)); - -/* A CCM operation label, defined on WUSB1.0[6.5.x] */ -struct aes_ccm_label { - u8 data[14]; -} __attribute__((packed)); - -/* - * Input to the key derivation sequence defined in - * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the - * PRF function. - */ -struct wusb_keydvt_in { - u8 hnonce[16]; - u8 dnonce[16]; -} __attribute__((packed)); - -/* - * Output from the key derivation sequence defined in - * WUSB1.0[6.5.1]. - */ -struct wusb_keydvt_out { - u8 kck[16]; - u8 ptk[16]; -} __attribute__((packed)); - -/* Pseudo Random Function WUSB1.0[6.5] */ -extern int wusb_crypto_init(void); -extern void wusb_crypto_exit(void); -extern ssize_t wusb_prf(void *out, size_t out_size, - const u8 key[16], const struct aes_ccm_nonce *_n, - const struct aes_ccm_label *a, - const void *b, size_t blen, size_t len); - -static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 64); -} - -static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 128); -} - -static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 256); -} - -/* Key derivation WUSB1.0[6.5.1] */ -static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out, - const u8 key[16], - const struct aes_ccm_nonce *n, - const struct wusb_keydvt_in *keydvt_in) -{ - const struct aes_ccm_label a = { .data = "Pair-wise keys" }; - return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a, - keydvt_in, sizeof(*keydvt_in)); -} - -/* - * Out-of-band MIC Generation WUSB1.0[6.5.2] - * - * Compute the MIC over @key, @n and @hs and place it in @mic_out. - * - * @mic_out: Where to place the 8 byte MIC tag - * @key: KCK from the derivation process - * @n: CCM nonce, n->sfn == 0, TKID as established in the - * process. - * @hs: Handshake struct for phase 2 of the 4-way. - * hs->bStatus and hs->bReserved are zero. - * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2] - * hs->dest_addr is the device's USB address padded with 0 - * hs->src_addr is the hosts's UWB device address - * hs->mic is ignored (as we compute that value). - */ -static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16], - const struct aes_ccm_nonce *n, - const struct usb_handshake *hs) -{ - const struct aes_ccm_label a = { .data = "out-of-bandMIC" }; - return wusb_prf_64(mic_out, 8, key, n, &a, - hs, sizeof(*hs) - sizeof(hs->MIC)); -} - -#endif /* #ifndef __WUSB_H__ */ |