Merge branch 'upstream-merged'

1 files changed, 35 insertions, 0 deletions

diff --git a/libdde_linux26/contrib/include/linux/spi/ds1305.h b/libdde_linux26/contrib/include/linux/spi/ds1305.h
new file mode 100644
index 00000000..287ec830
--- /dev/null
+++ b/libdde_linux26/contrib/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+	/* Trickle charge configuration:  it's OK to leave out the MAGIC
+	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+	 */
+#define DS1305_TRICKLE_MAGIC	0xa0
+#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
+#define DS1305_TRICKLE_DS1	0x04	/* one diode */
+#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
+	u8	trickle;
+
+	/* set only on ds1306 parts */
+	bool	is_ds1306;
+
+	/* ds1306 only:  enable 1 Hz output */
+	bool	en_1hz;
+
+	/* REVISIT:  the driver currently expects nINT0 to be wired
+	 * as the alarm IRQ.  ALM1 may also need to be set up ...
+	 */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */