rename libdde_linux26 into libdde-linux26 to make dpkg-source happy

1 files changed, 0 insertions, 252 deletions

diff --git a/libdde_linux26/contrib/include/linux/scc.h b/libdde_linux26/contrib/include/linux/scc.h
deleted file mode 100644
index 3495bd95..00000000
--- a/libdde_linux26/contrib/include/linux/scc.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
-#ifndef	_SCC_H
-#define	_SCC_H
-
-
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
-
-enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
-
-/* Vector masks in RR2B */
-
-#define VECTOR_MASK	0x06
-#define TXINT		0x00
-#define EXINT		0x02
-#define RXINT		0x04
-#define SPINT		0x06
-
-#ifdef CONFIG_SCC_DELAY
-#define Inb(port)	inb_p(port)
-#define Outb(port, val)	outb_p(val, port)
-#else
-#define Inb(port)	inb(port)
-#define Outb(port, val)	outb(val, port)
-#endif
-
-/* SCC channel control structure for KISS */
-
-struct scc_kiss {
-	unsigned char txdelay;		/* Transmit Delay 10 ms/cnt */
-	unsigned char persist;		/* Persistence (0-255) as a % */
-	unsigned char slottime;		/* Delay to wait on persistence hit */
-	unsigned char tailtime;		/* Delay after last byte written */
-	unsigned char fulldup;		/* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
-	unsigned char waittime;		/* Waittime before any transmit attempt */
-	unsigned int  maxkeyup;		/* Maximum time to transmit (seconds) */
-	unsigned int  mintime;		/* Minimal offtime after MAXKEYUP timeout (seconds) */
-	unsigned int  idletime;		/* Maximum idle time in ALWAYS KEYED mode (seconds) */
-	unsigned int  maxdefer;		/* Timer for CSMA channel busy limit */
-	unsigned char tx_inhibit;	/* Transmit is not allowed when set */	
-	unsigned char group;		/* Group ID for AX.25 TX interlocking */
-	unsigned char mode;		/* 'normal' or 'hwctrl' mode (unused) */
-	unsigned char softdcd;		/* Use DPLL instead of DCD pin for carrier detect */
-};
-
-
-/* SCC channel structure */
-
-struct scc_channel {
-	int init;			/* channel exists? */
-
-	struct net_device *dev;		/* link to device control structure */
-	struct net_device_stats dev_stat;/* device statistics */
-
-	char brand;			/* manufacturer of the board */
-	long clock;			/* used clock */
-
-	io_port ctrl;			/* I/O address of CONTROL register */
-	io_port	data;			/* I/O address of DATA register */
-	io_port special;		/* I/O address of special function port */
-	int irq;			/* Number of Interrupt */
-
-	char option;
-	char enhanced;			/* Enhanced SCC support */
-
-	unsigned char wreg[16]; 	/* Copy of last written value in WRx */
-	unsigned char status;		/* Copy of R0 at last external interrupt */
-	unsigned char dcd;		/* DCD status */
-
-        struct scc_kiss kiss;		/* control structure for KISS params */
-        struct scc_stat stat;		/* statistical information */
-        struct scc_modem modem; 	/* modem information */
-
-        struct sk_buff_head tx_queue;	/* next tx buffer */
-        struct sk_buff *rx_buff;	/* pointer to frame currently received */
-        struct sk_buff *tx_buff;	/* pointer to frame currently transmitted */
-
-	/* Timer */
-	struct timer_list tx_t;		/* tx timer for this channel */
-	struct timer_list tx_wdog;	/* tx watchdogs */
-	
-	/* Channel lock */
-	spinlock_t	lock;		/* Channel guard lock */
-};
-
-#endif /* defined(__KERNEL__) */
-#endif /* defined(_SCC_H) */