check in the original version of dde linux26.

1 files changed, 473 insertions, 0 deletions

diff --git a/libdde_linux26/contrib/include/linux/interrupt.h b/libdde_linux26/contrib/include/linux/interrupt.h
new file mode 100644
index 00000000..9127f6b5
--- /dev/null
+++ b/libdde_linux26/contrib/include/linux/interrupt.h
@@ -0,0 +1,473 @@
+/* interrupt.h */
+#ifndef _LINUX_INTERRUPT_H
+#define _LINUX_INTERRUPT_H
+
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/preempt.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+#include <linux/irqnr.h>
+#include <linux/hardirq.h>
+#include <linux/sched.h>
+#include <linux/irqflags.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour.  When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE	0x00000000
+#define IRQF_TRIGGER_RISING	0x00000001
+#define IRQF_TRIGGER_FALLING	0x00000002
+#define IRQF_TRIGGER_HIGH	0x00000004
+#define IRQF_TRIGGER_LOW	0x00000008
+#define IRQF_TRIGGER_MASK	(IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE	0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_DISABLED - keep irqs disabled when calling the action handler
+ * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ * IRQF_PERCPU - Interrupt is per cpu
+ * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
+ * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
+ *                registered first in an shared interrupt is considered for
+ *                performance reasons)
+ */
+#define IRQF_DISABLED		0x00000020
+#define IRQF_SAMPLE_RANDOM	0x00000040
+#define IRQF_SHARED		0x00000080
+#define IRQF_PROBE_SHARED	0x00000100
+#define IRQF_TIMER		0x00000200
+#define IRQF_PERCPU		0x00000400
+#define IRQF_NOBALANCING	0x00000800
+#define IRQF_IRQPOLL		0x00001000
+
+typedef irqreturn_t (*irq_handler_t)(int, void *);
+
+struct irqaction {
+	irq_handler_t handler;
+	unsigned long flags;
+	cpumask_t mask;
+	const char *name;
+	void *dev_id;
+	struct irqaction *next;
+	int irq;
+	struct proc_dir_entry *dir;
+};
+
+extern irqreturn_t no_action(int cpl, void *dev_id);
+extern int __must_check request_irq(unsigned int, irq_handler_t handler,
+		       unsigned long, const char *, void *);
+extern void free_irq(unsigned int, void *);
+
+struct device;
+
+extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
+			    irq_handler_t handler, unsigned long irqflags,
+			    const char *devname, void *dev_id);
+extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
+
+/*
+ * On lockdep we dont want to enable hardirqs in hardirq
+ * context. Use local_irq_enable_in_hardirq() to annotate
+ * kernel code that has to do this nevertheless (pretty much
+ * the only valid case is for old/broken hardware that is
+ * insanely slow).
+ *
+ * NOTE: in theory this might break fragile code that relies
+ * on hardirq delivery - in practice we dont seem to have such
+ * places left. So the only effect should be slightly increased
+ * irqs-off latencies.
+ */
+#ifdef CONFIG_LOCKDEP
+# define local_irq_enable_in_hardirq()	do { } while (0)
+#else
+# define local_irq_enable_in_hardirq()	local_irq_enable()
+#endif
+
+extern void disable_irq_nosync(unsigned int irq);
+extern void disable_irq(unsigned int irq);
+extern void enable_irq(unsigned int irq);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+
+extern cpumask_var_t irq_default_affinity;
+
+extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int irq_can_set_affinity(unsigned int irq);
+extern int irq_select_affinity(unsigned int irq);
+
+#else /* CONFIG_SMP */
+
+static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
+{
+	return -EINVAL;
+}
+
+static inline int irq_can_set_affinity(unsigned int irq)
+{
+	return 0;
+}
+
+static inline int irq_select_affinity(unsigned int irq)  { return 0; }
+
+#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+/*
+ * Special lockdep variants of irq disabling/enabling.
+ * These should be used for locking constructs that
+ * know that a particular irq context which is disabled,
+ * and which is the only irq-context user of a lock,
+ * that it's safe to take the lock in the irq-disabled
+ * section without disabling hardirqs.
+ *
+ * On !CONFIG_LOCKDEP they are equivalent to the normal
+ * irq disable/enable methods.
+ */
+static inline void disable_irq_nosync_lockdep(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_disable();
+#endif
+}
+
+static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
+{
+	disable_irq_nosync(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_save(*flags);
+#endif
+}
+
+static inline void disable_irq_lockdep(unsigned int irq)
+{
+	disable_irq(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_disable();
+#endif
+}
+
+static inline void enable_irq_lockdep(unsigned int irq)
+{
+#ifdef CONFIG_LOCKDEP
+	local_irq_enable();
+#endif
+	enable_irq(irq);
+}
+
+static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
+{
+#ifdef CONFIG_LOCKDEP
+	local_irq_restore(*flags);
+#endif
+	enable_irq(irq);
+}
+
+/* IRQ wakeup (PM) control: */
+extern int set_irq_wake(unsigned int irq, unsigned int on);
+
+static inline int enable_irq_wake(unsigned int irq)
+{
+	return set_irq_wake(irq, 1);
+}
+
+static inline int disable_irq_wake(unsigned int irq)
+{
+	return set_irq_wake(irq, 0);
+}
+
+#else /* !CONFIG_GENERIC_HARDIRQS */
+/*
+ * NOTE: non-genirq architectures, if they want to support the lock
+ * validator need to define the methods below in their asm/irq.h
+ * files, under an #ifdef CONFIG_LOCKDEP section.
+ */
+#ifndef CONFIG_LOCKDEP
+#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
+#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
+						disable_irq_nosync(irq)
+#  define disable_irq_lockdep(irq)		disable_irq(irq)
+#  define enable_irq_lockdep(irq)		enable_irq(irq)
+#  define enable_irq_lockdep_irqrestore(irq, flags) \
+						enable_irq(irq)
+# endif
+
+static inline int enable_irq_wake(unsigned int irq)
+{
+	return 0;
+}
+
+static inline int disable_irq_wake(unsigned int irq)
+{
+	return 0;
+}
+#endif /* CONFIG_GENERIC_HARDIRQS */
+
+#ifndef __ARCH_SET_SOFTIRQ_PENDING
+#define set_softirq_pending(x) (local_softirq_pending() = (x))
+#define or_softirq_pending(x)  (local_softirq_pending() |= (x))
+#endif
+
+/* Some architectures might implement lazy enabling/disabling of
+ * interrupts. In some cases, such as stop_machine, we might want
+ * to ensure that after a local_irq_disable(), interrupts have
+ * really been disabled in hardware. Such architectures need to
+ * implement the following hook.
+ */
+#ifndef hard_irq_disable
+#define hard_irq_disable()	do { } while(0)
+#endif
+
+/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
+   frequency threaded job scheduling. For almost all the purposes
+   tasklets are more than enough. F.e. all serial device BHs et
+   al. should be converted to tasklets, not to softirqs.
+ */
+
+enum
+{
+	HI_SOFTIRQ=0,
+	TIMER_SOFTIRQ,
+	NET_TX_SOFTIRQ,
+	NET_RX_SOFTIRQ,
+	BLOCK_SOFTIRQ,
+	TASKLET_SOFTIRQ,
+	SCHED_SOFTIRQ,
+	HRTIMER_SOFTIRQ,
+	RCU_SOFTIRQ,	/* Preferable RCU should always be the last softirq */
+
+	NR_SOFTIRQS
+};
+
+/* softirq mask and active fields moved to irq_cpustat_t in
+ * asm/hardirq.h to get better cache usage.  KAO
+ */
+
+struct softirq_action
+{
+	void	(*action)(struct softirq_action *);
+};
+
+asmlinkage void do_softirq(void);
+asmlinkage void __do_softirq(void);
+extern void open_softirq(int nr, void (*action)(struct softirq_action *));
+extern void softirq_init(void);
+#define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
+extern void raise_softirq_irqoff(unsigned int nr);
+extern void raise_softirq(unsigned int nr);
+
+/* This is the worklist that queues up per-cpu softirq work.
+ *
+ * send_remote_sendirq() adds work to these lists, and
+ * the softirq handler itself dequeues from them.  The queues
+ * are protected by disabling local cpu interrupts and they must
+ * only be accessed by the local cpu that they are for.
+ */
+DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
+
+/* Try to send a softirq to a remote cpu.  If this cannot be done, the
+ * work will be queued to the local cpu.
+ */
+extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
+
+/* Like send_remote_softirq(), but the caller must disable local cpu interrupts
+ * and compute the current cpu, passed in as 'this_cpu'.
+ */
+extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
+				  int this_cpu, int softirq);
+
+/* Tasklets --- multithreaded analogue of BHs.
+
+   Main feature differing them of generic softirqs: tasklet
+   is running only on one CPU simultaneously.
+
+   Main feature differing them of BHs: different tasklets
+   may be run simultaneously on different CPUs.
+
+   Properties:
+   * If tasklet_schedule() is called, then tasklet is guaranteed
+     to be executed on some cpu at least once after this.
+   * If the tasklet is already scheduled, but its excecution is still not
+     started, it will be executed only once.
+   * If this tasklet is already running on another CPU (or schedule is called
+     from tasklet itself), it is rescheduled for later.
+   * Tasklet is strictly serialized wrt itself, but not
+     wrt another tasklets. If client needs some intertask synchronization,
+     he makes it with spinlocks.
+ */
+
+struct tasklet_struct
+{
+	struct tasklet_struct *next;
+	unsigned long state;
+	atomic_t count;
+	void (*func)(unsigned long);
+	unsigned long data;
+};
+
+#define DECLARE_TASKLET(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
+
+#define DECLARE_TASKLET_DISABLED(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
+
+
+enum
+{
+	TASKLET_STATE_SCHED,	/* Tasklet is scheduled for execution */
+	TASKLET_STATE_RUN	/* Tasklet is running (SMP only) */
+};
+
+#ifdef CONFIG_SMP
+static inline int tasklet_trylock(struct tasklet_struct *t)
+{
+	return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock(struct tasklet_struct *t)
+{
+	smp_mb__before_clear_bit(); 
+	clear_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock_wait(struct tasklet_struct *t)
+{
+	while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
+}
+#else
+#define tasklet_trylock(t) 1
+#define tasklet_unlock_wait(t) do { } while (0)
+#define tasklet_unlock(t) do { } while (0)
+#endif
+
+extern void __tasklet_schedule(struct tasklet_struct *t);
+
+static inline void tasklet_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_schedule(t);
+}
+
+extern void __tasklet_hi_schedule(struct tasklet_struct *t);
+
+static inline void tasklet_hi_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_hi_schedule(t);
+}
+
+
+static inline void tasklet_disable_nosync(struct tasklet_struct *t)
+{
+	atomic_inc(&t->count);
+	smp_mb__after_atomic_inc();
+}
+
+static inline void tasklet_disable(struct tasklet_struct *t)
+{
+	tasklet_disable_nosync(t);
+	tasklet_unlock_wait(t);
+	smp_mb();
+}
+
+static inline void tasklet_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+static inline void tasklet_hi_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+extern void tasklet_kill(struct tasklet_struct *t);
+extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
+extern void tasklet_init(struct tasklet_struct *t,
+			 void (*func)(unsigned long), unsigned long data);
+
+/*
+ * Autoprobing for irqs:
+ *
+ * probe_irq_on() and probe_irq_off() provide robust primitives
+ * for accurate IRQ probing during kernel initialization.  They are
+ * reasonably simple to use, are not "fooled" by spurious interrupts,
+ * and, unlike other attempts at IRQ probing, they do not get hung on
+ * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
+ *
+ * For reasonably foolproof probing, use them as follows:
+ *
+ * 1. clear and/or mask the device's internal interrupt.
+ * 2. sti();
+ * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
+ * 4. enable the device and cause it to trigger an interrupt.
+ * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
+ * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
+ * 7. service the device to clear its pending interrupt.
+ * 8. loop again if paranoia is required.
+ *
+ * probe_irq_on() returns a mask of allocated irq's.
+ *
+ * probe_irq_off() takes the mask as a parameter,
+ * and returns the irq number which occurred,
+ * or zero if none occurred, or a negative irq number
+ * if more than one irq occurred.
+ */
+
+#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
+static inline unsigned long probe_irq_on(void)
+{
+	return 0;
+}
+static inline int probe_irq_off(unsigned long val)
+{
+	return 0;
+}
+static inline unsigned int probe_irq_mask(unsigned long val)
+{
+	return 0;
+}
+#else
+extern unsigned long probe_irq_on(void);	/* returns 0 on failure */
+extern int probe_irq_off(unsigned long);	/* returns 0 or negative on failure */
+extern unsigned int probe_irq_mask(unsigned long);	/* returns mask of ISA interrupts */
+#endif
+
+#ifdef CONFIG_PROC_FS
+/* Initialize /proc/irq/ */
+extern void init_irq_proc(void);
+#else
+static inline void init_irq_proc(void)
+{
+}
+#endif
+
+int show_interrupts(struct seq_file *p, void *v);
+
+struct irq_desc;
+
+extern int early_irq_init(void);
+extern int arch_early_irq_init(void);
+extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
+
+#endif