check in the original version of dde linux26.

1 files changed, 1387 insertions, 0 deletions

diff --git a/libdde_linux26/contrib/include/linux/input.h b/libdde_linux26/contrib/include/linux/input.h
new file mode 100644
index 00000000..1249a0c2
--- /dev/null
+++ b/libdde_linux26/contrib/include/linux/input.h
@@ -0,0 +1,1387 @@
+#ifndef _INPUT_H
+#define _INPUT_H
+
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifdef __KERNEL__
+#include <linux/time.h>
+#include <linux/list.h>
+#else
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010000
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, int[2])			/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, int[2])			/* set repeat settings */
+#define EVIOCGKEYCODE		_IOR('E', 0x04, int[2])			/* get keycode */
+#define EVIOCSKEYCODE		_IOW('E', 0x04, int[2])			/* set keycode */
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global keystate */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + ev, len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + abs, struct input_absinfo)		/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + abs, struct input_absinfo)		/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_SW			0x05
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+#define EV_CNT			(EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116	/* SC System Power Down */
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGEUL		122
+#define KEY_HANGUEL		KEY_HANGEUL
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128	/* AC Stop */
+#define KEY_AGAIN		129
+#define KEY_PROPS		130	/* AC Properties */
+#define KEY_UNDO		131	/* AC Undo */
+#define KEY_FRONT		132
+#define KEY_COPY		133	/* AC Copy */
+#define KEY_OPEN		134	/* AC Open */
+#define KEY_PASTE		135	/* AC Paste */
+#define KEY_FIND		136	/* AC Search */
+#define KEY_CUT			137	/* AC Cut */
+#define KEY_HELP		138	/* AL Integrated Help Center */
+#define KEY_MENU		139	/* Menu (show menu) */
+#define KEY_CALC		140	/* AL Calculator */
+#define KEY_SETUP		141
+#define KEY_SLEEP		142	/* SC System Sleep */
+#define KEY_WAKEUP		143	/* System Wake Up */
+#define KEY_FILE		144	/* AL Local Machine Browser */
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150	/* AL Internet Browser */
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK		KEY_COFFEE
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
+#define KEY_COMPUTER		157
+#define KEY_BACK		158	/* AC Back */
+#define KEY_FORWARD		159	/* AC Forward */
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169	/* Media Select Telephone */
+#define KEY_ISO			170
+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE		172	/* AC Home */
+#define KEY_REFRESH		173	/* AC Refresh */
+#define KEY_EXIT		174	/* AC Exit */
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+#define KEY_NEW			181	/* AC New */
+#define KEY_REDO		182	/* AC Redo/Repeat */
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206	/* AC Close */
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210	/* AC Print */
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223	/* AC Cancel */
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE	228
+#define KEY_KBDILLUMDOWN	229
+#define KEY_KBDILLUMUP		230
+
+#define KEY_SEND		231	/* AC Send */
+#define KEY_REPLY		232	/* AC Reply */
+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
+#define KEY_SAVE		234	/* AC Save */
+#define KEY_DOCUMENTS		235
+
+#define KEY_BATTERY		236
+
+#define KEY_BLUETOOTH		237
+#define KEY_WLAN		238
+#define KEY_UWB			239
+
+#define KEY_UNKNOWN		240
+
+#define KEY_VIDEO_NEXT		241	/* drive next video source */
+#define KEY_VIDEO_PREV		242	/* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
+#define KEY_DISPLAY_OFF		245	/* display device to off state */
+
+#define KEY_WIMAX		246
+
+/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e	/* Media Select Home */
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178	/* Media Select Computer */
+#define KEY_TV			0x179	/* Media Select TV */
+#define KEY_TV2			0x17a	/* Media Select Cable */
+#define KEY_VCR			0x17b	/* Media Select VCR */
+#define KEY_VCR2		0x17c	/* VCR Plus */
+#define KEY_SAT			0x17d	/* Media Select Satellite */
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f	/* Media Select CD */
+#define KEY_TAPE		0x180	/* Media Select Tape */
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182	/* Media Select Tuner */
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185	/* Media Select DVD */
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188
+#define KEY_VIDEO		0x189
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c	/* Media Select Messages */
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192	/* Channel Increment */
+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195	/* Recall Last */
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
+#define KEY_GAMES		0x1a1	/* Media Select Games */
+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
+#define KEY_DATABASE		0x1aa	/* AL Database App */
+#define KEY_NEWS		0x1ab	/* AL Newsreader */
+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR		0x1b2
+#define KEY_EURO		0x1b3
+
+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
+#define KEY_FRAMEFORWARD	0x1b5
+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_BRL_DOT1		0x1f1
+#define KEY_BRL_DOT2		0x1f2
+#define KEY_BRL_DOT3		0x1f3
+#define KEY_BRL_DOT4		0x1f4
+#define KEY_BRL_DOT5		0x1f5
+#define KEY_BRL_DOT6		0x1f6
+#define KEY_BRL_DOT7		0x1f7
+#define KEY_BRL_DOT8		0x1f8
+#define KEY_BRL_DOT9		0x1f9
+#define KEY_BRL_DOT10		0x1fa
+
+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
+#define KEY_NUMERIC_1		0x201	/* and other keypads */
+#define KEY_NUMERIC_2		0x202
+#define KEY_NUMERIC_3		0x203
+#define KEY_NUMERIC_4		0x204
+#define KEY_NUMERIC_5		0x205
+#define KEY_NUMERIC_6		0x206
+#define KEY_NUMERIC_7		0x207
+#define KEY_NUMERIC_8		0x208
+#define KEY_NUMERIC_9		0x209
+#define KEY_NUMERIC_STAR	0x20a
+#define KEY_NUMERIC_POUND	0x20b
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING	KEY_MUTE
+#define KEY_MAX			0x2ff
+#define KEY_CNT			(KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+#define REL_CNT			(REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+#define ABS_VOLUME		0x20
+#define ABS_MISC		0x28
+#define ABS_MAX			0x3f
+#define ABS_CNT			(ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
+#define SW_MAX			0x0f
+#define SW_CNT			(SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+#define MSC_CNT			(MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+#define LED_CNT			(LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+#define SND_CNT			(SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+#define BUS_VIRTUAL		0x06
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+#define BUS_GSC			0x1A
+#define BUS_ATARI		0x1B
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+	__u16 length;
+	__u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+	__u16 button;
+	__u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+	__u16 attack_length;
+	__u16 attack_level;
+	__u16 fade_length;
+	__u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+	__s16 level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ *	to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+	__u16 right_saturation;
+	__u16 left_saturation;
+
+	__s16 right_coeff;
+	__s16 left_coeff;
+
+	__u16 deadband;
+	__s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	__s16 *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+	__u16 strong_magnitude;
+	__u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ *	defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ *	0 deg -> 0x0000 (down)
+ *	90 deg -> 0x4000 (left)
+ *	180 deg -> 0x8000 (up)
+ *	270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+#define FF_EFFECT_MIN	FF_RUMBLE
+#define FF_EFFECT_MAX	FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+#define FF_WAVEFORM_MIN	FF_SQUARE
+#define FF_WAVEFORM_MAX	FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+#define FF_CNT		(FF_MAX+1)
+
+#ifdef __KERNEL__
+
+/*
+ * In-kernel definitions.
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/timer.h>
+#include <linux/mod_devicetable.h>
+
+/**
+ * struct input_dev - represents an input device
+ * @name: name of the device
+ * @phys: physical path to the device in the system hierarchy
+ * @uniq: unique identification code for the device (if device has it)
+ * @id: id of the device (struct input_id)
+ * @evbit: bitmap of types of events supported by the device (EV_KEY,
+ *	EV_REL, etc.)
+ * @keybit: bitmap of keys/buttons this device has
+ * @relbit: bitmap of relative axes for the device
+ * @absbit: bitmap of absolute axes for the device
+ * @mscbit: bitmap of miscellaneous events supported by the device
+ * @ledbit: bitmap of leds present on the device
+ * @sndbit: bitmap of sound effects supported by the device
+ * @ffbit: bitmap of force feedback effects supported by the device
+ * @swbit: bitmap of switches present on the device
+ * @keycodemax: size of keycode table
+ * @keycodesize: size of elements in keycode table
+ * @keycode: map of scancodes to keycodes for this device
+ * @setkeycode: optional method to alter current keymap, used to implement
+ *	sparse keymaps. If not supplied default mechanism will be used
+ * @getkeycode: optional method to retrieve current keymap. If not supplied
+ *	default mechanism will be used
+ * @ff: force feedback structure associated with the device if device
+ *	supports force feedback effects
+ * @repeat_key: stores key code of the last key pressed; used to implement
+ *	software autorepeat
+ * @timer: timer for software autorepeat
+ * @sync: set to 1 when there were no new events since last EV_SYNC
+ * @abs: current values for reports from absolute axes
+ * @rep: current values for autorepeat parameters (delay, rate)
+ * @key: reflects current state of device's keys/buttons
+ * @led: reflects current state of device's LEDs
+ * @snd: reflects current state of sound effects
+ * @sw: reflects current state of device's switches
+ * @absmax: maximum values for events coming from absolute axes
+ * @absmin: minimum values for events coming from absolute axes
+ * @absfuzz: describes noisiness for axes
+ * @absflat: size of the center flat position (used by joydev)
+ * @open: this method is called when the very first user calls
+ *	input_open_device(). The driver must prepare the device
+ *	to start generating events (start polling thread,
+ *	request an IRQ, submit URB, etc.)
+ * @close: this method is called when the very last user calls
+ *	input_close_device().
+ * @flush: purges the device. Most commonly used to get rid of force
+ *	feedback effects loaded into the device when disconnecting
+ *	from it
+ * @event: event handler for events sent _to_ the device, like EV_LED
+ *	or EV_SND. The device is expected to carry out the requested
+ *	action (turn on a LED, play sound, etc.) The call is protected
+ *	by @event_lock and must not sleep
+ * @grab: input handle that currently has the device grabbed (via
+ *	EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
+ *	recipient for all input events coming from the device
+ * @event_lock: this spinlock is is taken when input core receives
+ *	and processes a new event for the device (in input_event()).
+ *	Code that accesses and/or modifies parameters of a device
+ *	(such as keymap or absmin, absmax, absfuzz, etc.) after device
+ *	has been registered with input core must take this lock.
+ * @mutex: serializes calls to open(), close() and flush() methods
+ * @users: stores number of users (input handlers) that opened this
+ *	device. It is used by input_open_device() and input_close_device()
+ *	to make sure that dev->open() is only called when the first
+ *	user opens device and dev->close() is called when the very
+ *	last user closes the device
+ * @going_away: marks devices that are in a middle of unregistering and
+ *	causes input_open_device*() fail with -ENODEV.
+ * @dev: driver model's view of this device
+ * @h_list: list of input handles associated with the device. When
+ *	accessing the list dev->mutex must be held
+ * @node: used to place the device onto input_dev_list
+ */
+struct input_dev {
+	const char *name;
+	const char *phys;
+	const char *uniq;
+	struct input_id id;
+
+	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+	unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
+	unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
+	unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
+	unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
+	unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
+	unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
+	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+	unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
+
+	unsigned int keycodemax;
+	unsigned int keycodesize;
+	void *keycode;
+	int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
+	int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
+
+	struct ff_device *ff;
+
+	unsigned int repeat_key;
+	struct timer_list timer;
+
+	int sync;
+
+	int abs[ABS_MAX + 1];
+	int rep[REP_MAX + 1];
+
+	unsigned long key[BITS_TO_LONGS(KEY_CNT)];
+	unsigned long led[BITS_TO_LONGS(LED_CNT)];
+	unsigned long snd[BITS_TO_LONGS(SND_CNT)];
+	unsigned long sw[BITS_TO_LONGS(SW_CNT)];
+
+	int absmax[ABS_MAX + 1];
+	int absmin[ABS_MAX + 1];
+	int absfuzz[ABS_MAX + 1];
+	int absflat[ABS_MAX + 1];
+
+	int (*open)(struct input_dev *dev);
+	void (*close)(struct input_dev *dev);
+	int (*flush)(struct input_dev *dev, struct file *file);
+	int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+
+	struct input_handle *grab;
+
+	spinlock_t event_lock;
+	struct mutex mutex;
+
+	unsigned int users;
+	int going_away;
+
+	struct device dev;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+#define to_input_dev(d) container_of(d, struct input_dev, dev)
+
+/*
+ * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+ */
+
+#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
+#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
+#endif
+
+#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING
+#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match"
+#endif
+
+#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
+#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
+#endif
+
+#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
+#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
+#endif
+
+#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
+#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
+#endif
+
+#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
+#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
+#endif
+
+#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
+#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
+#endif
+
+#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
+#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
+#endif
+
+#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
+#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
+#endif
+
+#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
+#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
+#endif
+
+#define INPUT_DEVICE_ID_MATCH_DEVICE \
+	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
+#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
+	(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
+
+struct input_handle;
+
+/**
+ * struct input_handler - implements one of interfaces for input devices
+ * @private: driver-specific data
+ * @event: event handler. This method is being called by input core with
+ *	interrupts disabled and dev->event_lock spinlock held and so
+ *	it may not sleep
+ * @connect: called when attaching a handler to an input device
+ * @disconnect: disconnects a handler from input device
+ * @start: starts handler for given handle. This function is called by
+ *	input core right after connect() method and also when a process
+ *	that "grabbed" a device releases it
+ * @fops: file operations this driver implements
+ * @minor: beginning of range of 32 minors for devices this driver
+ *	can provide
+ * @name: name of the handler, to be shown in /proc/bus/input/handlers
+ * @id_table: pointer to a table of input_device_ids this driver can
+ *	handle
+ * @blacklist: pointer to a table of input_device_ids this driver should
+ *	ignore even if they match @id_table
+ * @h_list: list of input handles associated with the handler
+ * @node: for placing the driver onto input_handler_list
+ *
+ * Input handlers attach to input devices and create input handles. There
+ * are likely several handlers attached to any given input device at the
+ * same time. All of them will get their copy of input event generated by
+ * the device.
+ *
+ * Note that input core serializes calls to connect() and disconnect()
+ * methods.
+ */
+struct input_handler {
+
+	void *private;
+
+	void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+	int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
+	void (*disconnect)(struct input_handle *handle);
+	void (*start)(struct input_handle *handle);
+
+	const struct file_operations *fops;
+	int minor;
+	const char *name;
+
+	const struct input_device_id *id_table;
+	const struct input_device_id *blacklist;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+
+/**
+ * struct input_handle - links input device with an input handler
+ * @private: handler-specific data
+ * @open: counter showing whether the handle is 'open', i.e. should deliver
+ *	events from its device
+ * @name: name given to the handle by handler that created it
+ * @dev: input device the handle is attached to
+ * @handler: handler that works with the device through this handle
+ * @d_node: used to put the handle on device's list of attached handles
+ * @h_node: used to put the handle on handler's list of handles from which
+ *	it gets events
+ */
+struct input_handle {
+
+	void *private;
+
+	int open;
+	const char *name;
+
+	struct input_dev *dev;
+	struct input_handler *handler;
+
+	struct list_head	d_node;
+	struct list_head	h_node;
+};
+
+struct input_dev *input_allocate_device(void);
+void input_free_device(struct input_dev *dev);
+
+static inline struct input_dev *input_get_device(struct input_dev *dev)
+{
+	return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
+}
+
+static inline void input_put_device(struct input_dev *dev)
+{
+	if (dev)
+		put_device(&dev->dev);
+}
+
+static inline void *input_get_drvdata(struct input_dev *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void input_set_drvdata(struct input_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+int __must_check input_register_device(struct input_dev *);
+void input_unregister_device(struct input_dev *);
+
+int __must_check input_register_handler(struct input_handler *);
+void input_unregister_handler(struct input_handler *);
+
+int input_register_handle(struct input_handle *);
+void input_unregister_handle(struct input_handle *);
+
+int input_grab_device(struct input_handle *);
+void input_release_device(struct input_handle *);
+
+int input_open_device(struct input_handle *);
+void input_close_device(struct input_handle *);
+
+int input_flush_device(struct input_handle* handle, struct file* file);
+
+void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+
+static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_KEY, code, !!value);
+}
+
+static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_REL, code, value);
+}
+
+static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_ABS, code, value);
+}
+
+static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_FF_STATUS, code, value);
+}
+
+static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_SW, code, !!value);
+}
+
+static inline void input_sync(struct input_dev *dev)
+{
+	input_event(dev, EV_SYN, SYN_REPORT, 0);
+}
+
+void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
+
+static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
+{
+	dev->absmin[axis] = min;
+	dev->absmax[axis] = max;
+	dev->absfuzz[axis] = fuzz;
+	dev->absflat[axis] = flat;
+
+	dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
+}
+
+int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
+int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+
+extern struct class input_class;
+
+/**
+ * struct ff_device - force-feedback part of an input device
+ * @upload: Called to upload an new effect into device
+ * @erase: Called to erase an effect from device
+ * @playback: Called to request device to start playing specified effect
+ * @set_gain: Called to set specified gain
+ * @set_autocenter: Called to auto-center device
+ * @destroy: called by input core when parent input device is being
+ *	destroyed
+ * @private: driver-specific data, will be freed automatically
+ * @ffbit: bitmap of force feedback capabilities truly supported by
+ *	device (not emulated like ones in input_dev->ffbit)
+ * @mutex: mutex for serializing access to the device
+ * @max_effects: maximum number of effects supported by device
+ * @effects: pointer to an array of effects currently loaded into device
+ * @effect_owners: array of effect owners; when file handle owning
+ *	an effect gets closed the effect is automatically erased
+ *
+ * Every force-feedback device must implement upload() and playback()
+ * methods; erase() is optional. set_gain() and set_autocenter() need
+ * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
+ * bits.
+ */
+struct ff_device {
+	int (*upload)(struct input_dev *dev, struct ff_effect *effect,
+		      struct ff_effect *old);
+	int (*erase)(struct input_dev *dev, int effect_id);
+
+	int (*playback)(struct input_dev *dev, int effect_id, int value);
+	void (*set_gain)(struct input_dev *dev, u16 gain);
+	void (*set_autocenter)(struct input_dev *dev, u16 magnitude);
+
+	void (*destroy)(struct ff_device *);
+
+	void *private;
+
+	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+
+	struct mutex mutex;
+
+	int max_effects;
+	struct ff_effect *effects;
+	struct file *effect_owners[];
+};
+
+int input_ff_create(struct input_dev *dev, int max_effects);
+void input_ff_destroy(struct input_dev *dev);
+
+int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+
+int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file);
+int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
+
+int input_ff_create_memless(struct input_dev *dev, void *data,
+		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
+
+#endif
+#endif