rename libdde_linux26 into libdde-linux26 to make dpkg-source happy

1 files changed, 0 insertions, 111 deletions

diff --git a/libdde_linux26/contrib/include/linux/eisa.h b/libdde_linux26/contrib/include/linux/eisa.h
deleted file mode 100644
index e61c0be2..00000000
--- a/libdde_linux26/contrib/include/linux/eisa.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _LINUX_EISA_H
-#define _LINUX_EISA_H
-
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-#define EISA_MAX_SLOTS 8
-
-#define EISA_MAX_RESOURCES 4
-
-/* A few EISA constants/offsets... */
-
-#define EISA_DMA1_STATUS            8
-#define EISA_INT1_CTRL           0x20
-#define EISA_INT1_MASK           0x21
-#define EISA_INT2_CTRL           0xA0
-#define EISA_INT2_MASK           0xA1
-#define EISA_DMA2_STATUS         0xD0
-#define EISA_DMA2_WRITE_SINGLE   0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL    0x4D0
-#define EISA_INT2_EDGE_LEVEL    0x4D1
-#define EISA_VENDOR_ID_OFFSET   0xC80
-#define EISA_CONFIG_OFFSET      0xC84
-
-#define EISA_CONFIG_ENABLED         1
-#define EISA_CONFIG_FORCED          2
-
-/* There is not much we can say about an EISA device, apart from
- * signature, slot number, and base address. dma_mask is set by
- * default to parent device mask..*/
-
-struct eisa_device {
-	struct eisa_device_id id;
-	int                   slot;
-	int                   state;
-	unsigned long         base_addr;
-	struct resource       res[EISA_MAX_RESOURCES];
-	u64                   dma_mask;
-	struct device         dev; /* generic device */
-#ifdef CONFIG_EISA_NAMES
-	char		      pretty_name[50];
-#endif
-};
-
-#define to_eisa_device(n) container_of(n, struct eisa_device, dev)
-
-static inline int eisa_get_region_index (void *addr)
-{
-	unsigned long x = (unsigned long) addr;
-
-	x &= 0xc00;
-	return (x >> 12);
-}
-
-struct eisa_driver {
-	const struct eisa_device_id *id_table;
-	struct device_driver         driver;
-};
-
-#define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver)
-
-/* These external functions are only available when EISA support is enabled. */
-#ifdef CONFIG_EISA
-
-extern struct bus_type eisa_bus_type;
-int eisa_driver_register (struct eisa_driver *edrv);
-void eisa_driver_unregister (struct eisa_driver *edrv);
-
-#else /* !CONFIG_EISA */
-
-static inline int eisa_driver_register (struct eisa_driver *edrv) { return 0; }
-static inline void eisa_driver_unregister (struct eisa_driver *edrv) { }
-
-#endif /* !CONFIG_EISA */
-
-/* Mimics pci.h... */
-static inline void *eisa_get_drvdata (struct eisa_device *edev)
-{
-        return edev->dev.driver_data;
-}
-
-static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
-{
-        edev->dev.driver_data = data;
-}
-
-/* The EISA root device. There's rumours about machines with multiple
- * busses (PA-RISC ?), so we try to handle that. */
-
-struct eisa_root_device {
-	struct device   *dev;	 /* Pointer to bridge device */
-	struct resource *res;
-	unsigned long    bus_base_addr;
-	int		 slots;  /* Max slot number */
-	int		 force_probe; /* Probe even when no slot 0 */
-	u64		 dma_mask; /* from bridge device */
-	int              bus_nr; /* Set by eisa_root_register */
-	struct resource  eisa_root_res;	/* ditto */
-};
-
-int eisa_root_register (struct eisa_root_device *root);
-
-#ifdef CONFIG_EISA
-extern int EISA_bus;
-#else
-# define EISA_bus 0
-#endif
-
-#endif