rename libdde_linux26 into libdde-linux26 to make dpkg-source happy

1 files changed, 0 insertions, 188 deletions

diff --git a/libdde_linux26/contrib/include/asm-generic/gpio.h b/libdde_linux26/contrib/include/asm-generic/gpio.h
deleted file mode 100644
index 81797ec9..00000000
--- a/libdde_linux26/contrib/include/asm-generic/gpio.h
+++ /dev/null
@@ -1,188 +0,0 @@
-#ifndef _ASM_GENERIC_GPIO_H
-#define _ASM_GENERIC_GPIO_H
-
-#include <linux/types.h>
-#include <linux/errno.h>
-
-#ifdef CONFIG_GPIOLIB
-
-#include <linux/compiler.h>
-
-/* Platforms may implement their GPIO interface with library code,
- * at a small performance cost for non-inlined operations and some
- * extra memory (for code and for per-GPIO table entries).
- *
- * While the GPIO programming interface defines valid GPIO numbers
- * to be in the range 0..MAX_INT, this library restricts them to the
- * smaller range 0..ARCH_NR_GPIOS-1.
- */
-
-#ifndef ARCH_NR_GPIOS
-#define ARCH_NR_GPIOS		256
-#endif
-
-static inline int gpio_is_valid(int number)
-{
-	/* only some non-negative numbers are valid */
-	return ((unsigned)number) < ARCH_NR_GPIOS;
-}
-
-struct seq_file;
-struct module;
-
-/**
- * struct gpio_chip - abstract a GPIO controller
- * @label: for diagnostics
- * @dev: optional device providing the GPIOs
- * @owner: helps prevent removal of modules exporting active GPIOs
- * @request: optional hook for chip-specific activation, such as
- *	enabling module power and clock; may sleep
- * @free: optional hook for chip-specific deactivation, such as
- *	disabling module power and clock; may sleep
- * @direction_input: configures signal "offset" as input, or returns error
- * @get: returns value for signal "offset"; for output signals this
- *	returns either the value actually sensed, or zero
- * @direction_output: configures signal "offset" as output, or returns error
- * @set: assigns output value for signal "offset"
- * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
- *	implementation may not sleep
- * @dbg_show: optional routine to show contents in debugfs; default code
- *	will be used when this is omitted, but custom code can show extra
- *	state (such as pullup/pulldown configuration).
- * @base: identifies the first GPIO number handled by this chip; or, if
- *	negative during registration, requests dynamic ID allocation.
- * @ngpio: the number of GPIOs handled by this controller; the last GPIO
- *	handled is (base + ngpio - 1).
- * @can_sleep: flag must be set iff get()/set() methods sleep, as they
- *	must while accessing GPIO expander chips over I2C or SPI
- *
- * A gpio_chip can help platforms abstract various sources of GPIOs so
- * they can all be accessed through a common programing interface.
- * Example sources would be SOC controllers, FPGAs, multifunction
- * chips, dedicated GPIO expanders, and so on.
- *
- * Each chip controls a number of signals, identified in method calls
- * by "offset" values in the range 0..(@ngpio - 1).  When those signals
- * are referenced through calls like gpio_get_value(gpio), the offset
- * is calculated by subtracting @base from the gpio number.
- */
-struct gpio_chip {
-	const char		*label;
-	struct device		*dev;
-	struct module		*owner;
-
-	int			(*request)(struct gpio_chip *chip,
-						unsigned offset);
-	void			(*free)(struct gpio_chip *chip,
-						unsigned offset);
-
-	int			(*direction_input)(struct gpio_chip *chip,
-						unsigned offset);
-	int			(*get)(struct gpio_chip *chip,
-						unsigned offset);
-	int			(*direction_output)(struct gpio_chip *chip,
-						unsigned offset, int value);
-	void			(*set)(struct gpio_chip *chip,
-						unsigned offset, int value);
-
-	int			(*to_irq)(struct gpio_chip *chip,
-						unsigned offset);
-
-	void			(*dbg_show)(struct seq_file *s,
-						struct gpio_chip *chip);
-	int			base;
-	u16			ngpio;
-	unsigned		can_sleep:1;
-	unsigned		exported:1;
-};
-
-extern const char *gpiochip_is_requested(struct gpio_chip *chip,
-			unsigned offset);
-extern int __must_check gpiochip_reserve(int start, int ngpio);
-
-/* add/remove chips */
-extern int gpiochip_add(struct gpio_chip *chip);
-extern int __must_check gpiochip_remove(struct gpio_chip *chip);
-
-
-/* Always use the library code for GPIO management calls,
- * or when sleeping may be involved.
- */
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-extern int gpio_get_value_cansleep(unsigned gpio);
-extern void gpio_set_value_cansleep(unsigned gpio, int value);
-
-
-/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
- * the GPIO is constant and refers to some always-present controller,
- * giving direct access to chip registers and tight bitbanging loops.
- */
-extern int __gpio_get_value(unsigned gpio);
-extern void __gpio_set_value(unsigned gpio, int value);
-
-extern int __gpio_cansleep(unsigned gpio);
-
-extern int __gpio_to_irq(unsigned gpio);
-
-#ifdef CONFIG_GPIO_SYSFS
-
-/*
- * A sysfs interface can be exported by individual drivers if they want,
- * but more typically is configured entirely from userspace.
- */
-extern int gpio_export(unsigned gpio, bool direction_may_change);
-extern void gpio_unexport(unsigned gpio);
-
-#endif	/* CONFIG_GPIO_SYSFS */
-
-#else	/* !CONFIG_HAVE_GPIO_LIB */
-
-static inline int gpio_is_valid(int number)
-{
-	/* only non-negative numbers are valid */
-	return number >= 0;
-}
-
-/* platforms that don't directly support access to GPIOs through I2C, SPI,
- * or other blocking infrastructure can use these wrappers.
- */
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return 0;
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-	might_sleep();
-	return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-	might_sleep();
-	gpio_set_value(gpio, value);
-}
-
-#endif /* !CONFIG_HAVE_GPIO_LIB */
-
-#ifndef CONFIG_GPIO_SYSFS
-
-/* sysfs support is only available with gpiolib, where it's optional */
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	return -ENOSYS;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-}
-#endif	/* CONFIG_GPIO_SYSFS */
-
-#endif /* _ASM_GENERIC_GPIO_H */