1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
#ifndef _LINUX_LP_H
#define _LINUX_LP_H
/*
* split in two parts by Joerg Dorchain
* usr/include/linux/lp.h modified for Amiga by Michael Rausch
* modified for Atari by Andreas Schwab
* bug fixed by Jes Sorensen 18/8-94:
* It was not possible to compile the kernel only for Atari or Amiga.
*
* linux i386 version c.1991-1992 James Wiegand
* many modifications copyright (C) 1992 Michael K. Johnson
* Interrupt support added 1993 Nigel Gamble
*/
/*
* many many printers are we going to support? currently, this is the
* hardcoded limit
*/
#define MAX_LP 5
/*
* Per POSIX guidelines, this module reserves the LP and lp prefixes
* These are the lp_table[minor].flags flags...
*/
#define LP_EXIST 0x0001
#define LP_BUSY 0x0004
#define LP_ABORT 0x0040
#define LP_CAREFUL 0x0080
#define LP_ABORTOPEN 0x0100
/* timeout for each character. This is relative to bus cycles -- it
* is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you
* have extremely slow printing, or if the machine seems to slow down
* a lot when you print. If you have slow printing, increase this
* number and recompile, and if your system gets bogged down, decrease
* this number. This can be changed with the tunelp(8) command as well.
*/
#define LP_INIT_CHAR 1000
/* The parallel port specs apparently say that there needs to be
* a .5usec wait before and after the strobe. Since there are wildly
* different computers running linux, I can't come up with a perfect
* value, but since it worked well on most printers before without,
* I'll initialize it to 0.
*/
#define LP_INIT_WAIT 0
/* This is the amount of time that the driver waits for the printer to
* catch up when the printer's buffer appears to be filled. If you
* want to tune this and have a fast printer (i.e. HPIIIP), decrease
* this number, and if you have a slow printer, increase this number.
* This is in hundredths of a second, the default 2 being .05 second.
* Or use the tunelp(8) command, which is especially nice if you want
* change back and forth between character and graphics printing, which
* are wildly different...
*/
#define LP_INIT_TIME 40
/* IOCTL numbers */
#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */
#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */
#define LPABORT 0x0604 /* call with TRUE arg to abort on error,
FALSE to retry. Default is retry. */
#define LPSETIRQ 0x0605 /* call with new IRQ number,
or 0 for polling (no IRQ) */
#define LPGETIRQ 0x0606 /* get the current IRQ number */
#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */
#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off-
line, and error indicators good on all writes,
FALSE to ignore them. Default is ignore. */
#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error,
FALSE to ignore error. Default is ignore. */
#define LPGETSTATUS 0x060b /* return LP_S(minor) */
#define LPRESET 0x060c /* reset printer */
/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
This is also used for re-checking error conditions if LP_ABORT is
not set. This is the default behavior. */
#define LP_TIMEOUT_INTERRUPT (60 * HZ)
#define LP_TIMEOUT_POLLED (10 * HZ)
#define LP_BUFFER_SIZE 1024 /*256*/
enum lp_type {
LP_UNKNOWN = 0,
LP_AMIGA = 1,
LP_ATARI = 2,
LP_MFC = 3,
LP_IOEXT = 4,
LP_MVME167 = 5,
LP_BVME6000 = 6
};
/*
* warning: this structure is in kernel space and has to fit in one page,
* i.e. must not be larger than 4k
*/
struct lp_struct {
char *name;
unsigned int irq;
void (*lp_out)(int,int); /*output char function*/
int (*lp_is_busy)(int);
int (*lp_has_pout)(int);
int (*lp_is_online)(int);
int (*lp_dummy)(int);
int (*lp_ioctl)(int, unsigned int, unsigned long);
int (*lp_open)(int); /* for module use counter */
void (*lp_release)(int); /* for module use counter */
int flags; /*for BUSY... */
unsigned int chars; /*busy timeout */
unsigned int time; /*wait time */
unsigned int wait;
struct wait_queue *lp_wait_q; /*strobe wait */
void *base; /* hardware drivers internal use*/
enum lp_type type;
char lp_buffer[LP_BUFFER_SIZE];
int do_print;
unsigned long copy_size,bytes_written;
};
extern struct lp_struct *lp_table[MAX_LP];
extern unsigned int lp_irq;
void lp_interrupt(int dev);
int lp_m68k_init(void);
int register_parallel(struct lp_struct *, int);
void unregister_parallel(int);
#endif
|
