path: root/linux/src/drivers/scsi/constants.c

/* 
 * ASCII values for a number of symbolic constants, printing functions,
 * etc.
 */

/*
 * Don't import our own symbols, as this would severely mess up our
 * symbol tables.
 */
#define _SCSI_SYMS_VER_
#define __NO_VERSION__
#include <linux/module.h>

#include <linux/config.h>
#include <linux/blk.h>
#include <linux/kernel.h>
#include "scsi.h"
#include "hosts.h"

#define CONST_COMMAND   0x01
#define CONST_STATUS    0x02
#define CONST_SENSE     0x04
#define CONST_XSENSE    0x08
#define CONST_CMND      0x10
#define CONST_MSG       0x20
#define CONST_HOST	0x40
#define CONST_DRIVER	0x80

static const char unknown[] = "UNKNOWN";

#ifdef CONFIG_SCSI_CONSTANTS
#ifdef CONSTANTS
#undef CONSTANTS
#endif
#define CONSTANTS (CONST_COMMAND | CONST_STATUS | CONST_SENSE | CONST_XSENSE \
		   | CONST_CMND | CONST_MSG | CONST_HOST | CONST_DRIVER)
#endif

#if (CONSTANTS & CONST_COMMAND)
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
/* 17-1b */ "Release", "Copy", "Erase", "Mode Sense", "Start/Stop Unit",
/* 1c-1d */ "Receive Diagnostic", "Send Diagnostic", 
/* 1e-1f */ "Prevent/Allow Medium Removal", unknown,
};


static const char *group_1_commands[] = {
/* 20-22 */  unknown, unknown, unknown,
/* 23-28 */ unknown, unknown, "Read Capacity", unknown, unknown, "Read (10)", 
/* 29-2d */ unknown, "Write (10)", "Seek (10)", unknown, unknown, 
/* 2e-31 */ "Write Verify","Verify", "Search High", "Search Equal", 
/* 32-34 */ "Search Low", "Set Limits", "Prefetch or Read Position", 
/* 35-37 */ "Synchronize Cache","Lock/Unlock Cache", "Read Defect Data", 
/* 38-3c */ "Medium Scan", "Compare","Copy Verify", "Write Buffer", "Read Buffer", 
/* 3d-3f */ "Update Block", "Read Long",  "Write Long",
};


static const char *group_2_commands[] = {
/* 40-41 */ "Change Definition", "Write Same", 
/* 42-48 */ unknown, "Read TOC", unknown, unknown, unknown, unknown, unknown, 
/* 49-4f */ unknown, unknown, unknown, "Log Select", "Log Sense", unknown, unknown,
/* 50-55 */ unknown, unknown, unknown, unknown, unknown, "Mode Select (10)",
/* 56-5b */ unknown, unknown, unknown, unknown, "Mode Sense (10)", unknown,
/* 5c-5f */ unknown, unknown, unknown,
};



#define group(opcode) (((opcode) >> 5) & 7)

#define RESERVED_GROUP  0
#define VENDOR_GROUP    1
#define NOTEXT_GROUP    2

static const char **commands[] = {
    group_0_commands, group_1_commands, group_2_commands, 
    (const char **) RESERVED_GROUP, (const char **) RESERVED_GROUP, 
    (const char **) NOTEXT_GROUP, (const char **) VENDOR_GROUP, 
    (const char **) VENDOR_GROUP
};

static const char reserved[] = "RESERVED";
static const char vendor[] = "VENDOR SPECIFIC";

static void print_opcode(int opcode) {
    const char **table = commands[ group(opcode) ];
    switch ((unsigned long) table) {
    case RESERVED_GROUP:
	printk("%s(0x%02x) ", reserved, opcode); 
	break;
    case NOTEXT_GROUP:
	printk("%s(0x%02x) ", unknown, opcode); 
	break;
    case VENDOR_GROUP:
	printk("%s(0x%02x) ", vendor, opcode); 
	break;
    default:
	if (table[opcode & 0x1f] != unknown)
	    printk("%s ",table[opcode & 0x1f]);
	else
	    printk("%s(0x%02x) ", unknown, opcode);
	break;
    }
}
#else /* CONST & CONST_COMMAND */
static void print_opcode(int opcode) {
    printk("0x%02x ", opcode);
}
#endif  

void print_command (unsigned char *command) {
    int i,s;
    print_opcode(command[0]);
    for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) 
	printk("%02x ", command[i]);
    printk("\n");
}

#if (CONSTANTS & CONST_STATUS)
static const char * statuses[] = {
/* 0-4 */ "Good", "Check Condition", "Condition Good", unknown, "Busy", 
/* 5-9 */ unknown, unknown, unknown, "Intermediate Good", unknown, 
/* a-d */ "Intermediate Good", unknown, "Reservation Conflict", unknown,
/* e-f */ unknown, unknown,
};
#endif

void print_status (int status) {
    status = (status >> 1) & 0xf;
#if (CONSTANTS & CONST_STATUS)
    printk("%s ",statuses[status]);
#else
    printk("0x%0x ", status); 
#endif 
}

#if (CONSTANTS & CONST_XSENSE)
#define D 0x001  /* DIRECT ACCESS DEVICE (disk) */
#define T 0x002  /* SEQUENTIAL ACCESS DEVICE (tape) */
#define L 0x004  /* PRINTER DEVICE */
#define P 0x008  /* PROCESSOR DEVICE */
#define W 0x010  /* WRITE ONCE READ MULTIPLE DEVICE */
#define R 0x020  /* READ ONLY (CD-ROM) DEVICE */
#define S 0x040  /* SCANNER DEVICE */
#define O 0x080  /* OPTICAL MEMORY DEVICE */
#define M 0x100  /* MEDIA CHANGER DEVICE */
#define C 0x200  /* COMMUNICATION DEVICE */

struct error_info{
    unsigned char code1, code2;
    unsigned short int devices;
    const char * text;
};

struct error_info2{
    unsigned char code1, code2_min, code2_max;
    unsigned short int devices;
    const char * text;
};

static struct error_info2 additional2[] =
{
  {0x40,0x00,0x7f,D,"Ram failure (%x)"},
  {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"},
  {0x41,0x00,0xff,D,"Data path failure (%x)"},
  {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"},
  {0, 0, 0, 0, NULL}
};

static struct error_info additional[] =
{
  {0x00,0x01,T,"Filemark detected"},
  {0x00,0x02,T|S,"End-of-partition/medium detected"},
  {0x00,0x03,T,"Setmark detected"},
  {0x00,0x04,T|S,"Beginning-of-partition/medium detected"},
  {0x00,0x05,T|S,"End-of-data detected"},
  {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"},
  {0x00,0x11,R,"Audio play operation in progress"},
  {0x00,0x12,R,"Audio play operation paused"},
  {0x00,0x13,R,"Audio play operation successfully completed"},
  {0x00,0x14,R,"Audio play operation stopped due to error"},
  {0x00,0x15,R,"No current audio status to return"},
  {0x01,0x00,D|W|O,"No index/sector signal"},
  {0x02,0x00,D|W|R|O|M,"No seek complete"},
  {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"},
  {0x03,0x01,T,"No write current"},
  {0x03,0x02,T,"Excessive write errors"},
  {0x04,0x00,D|T|L|P|W|R|S|O|M|C,
     "Logical unit not ready, cause not reportable"},
  {0x04,0x01,D|T|L|P|W|R|S|O|M|C,
     "Logical unit is in process of becoming ready"},
  {0x04,0x02,D|T|L|P|W|R|S|O|M|C,
     "Logical unit not ready, initializing command required"},
  {0x04,0x03,D|T|L|P|W|R|S|O|M|C,
     "Logical unit not ready, manual intervention required"},
  {0x04,0x04,D|T|L|O,"Logical unit not ready, format in progress"},
  {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"},
  {0x06,0x00,D|W|R|O|M,"No reference position found"},
  {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"},
  {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"},
  {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"},
  {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"},
  {0x09,0x00,D|T|W|R|O,"Track following error"},
  {0x09,0x01,W|R|O,"Tracking servo failure"},
  {0x09,0x02,W|R|O,"Focus servo failure"},
  {0x09,0x03,W|R|O,"Spindle servo failure"},
  {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"},
  {0x0C,0x00,T|S,"Write error"},
  {0x0C,0x01,D|W|O,"Write error recovered with auto reallocation"},
  {0x0C,0x02,D|W|O,"Write error - auto reallocation failed"},
  {0x10,0x00,D|W|O,"Id crc or ecc error"},
  {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"},
  {0x11,0x01,D|T|W|S|O,"Read retries exhausted"},
  {0x11,0x02,D|T|W|S|O,"Error too long to correct"},
  {0x11,0x03,D|T|W|S|O,"Multiple read errors"},
  {0x11,0x04,D|W|O,"Unrecovered read error - auto reallocate failed"},
  {0x11,0x05,W|R|O,"L-ec uncorrectable error"},
  {0x11,0x06,W|R|O,"Circ unrecovered error"},
  {0x11,0x07,W|O,"Data resynchronization error"},
  {0x11,0x08,T,"Incomplete block read"},
  {0x11,0x09,T,"No gap found"},
  {0x11,0x0A,D|T|O,"Miscorrected error"},
  {0x11,0x0B,D|W|O,"Unrecovered read error - recommend reassignment"},
  {0x11,0x0C,D|W|O,"Unrecovered read error - recommend rewrite the data"},
  {0x12,0x00,D|W|O,"Address mark not found for id field"},
  {0x13,0x00,D|W|O,"Address mark not found for data field"},
  {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"},
  {0x14,0x01,D|T|W|R|O,"Record not found"},
  {0x14,0x02,T,"Filemark or setmark not found"},
  {0x14,0x03,T,"End-of-data not found"},
  {0x14,0x04,T,"Block sequence error"},
  {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"},
  {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"},
  {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"},
  {0x16,0x00,D|W|O,"Data synchronization mark error"},
  {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"},
  {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"},
  {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"},
  {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"},
  {0x17,0x04,W|R|O,"Recovered data with retries and/or circ applied"},
  {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"},
  {0x17,0x06,D|W|O,"Recovered data without ecc - data auto-reallocated"},
  {0x17,0x07,D|W|O,"Recovered data without ecc - recommend reassignment"},
  {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"},
  {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"},
  {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"},
  {0x18,0x03,R,"Recovered data with circ"},
  {0x18,0x04,R,"Recovered data with lec"},
  {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"},
  {0x19,0x00,D|O,"Defect list error"},
  {0x19,0x01,D|O,"Defect list not available"},
  {0x19,0x02,D|O,"Defect list error in primary list"},
  {0x19,0x03,D|O,"Defect list error in grown list"},
  {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"},
  {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"},
  {0x1C,0x00,D|O,"Defect list not found"},
  {0x1C,0x01,D|O,"Primary defect list not found"},
  {0x1C,0x02,D|O,"Grown defect list not found"},
  {0x1D,0x00,D|W|O,"Miscompare during verify operation"},
  {0x1E,0x00,D|W|O,"Recovered id with ecc correction"},
  {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"},
  {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"},
  {0x21,0x01,M,"Invalid element address"},
  {0x22,0x00,D,"Illegal function (should use 20 00, 24 00, or 26 00)"},
  {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"},
  {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"},
  {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"},
  {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"},
  {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"},
  {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"},
  {0x27,0x00,D|T|W|O,"Write protected"},
  {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"},
  {0x28,0x01,M,"Import or export element accessed"},
  {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"},
  {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"},
  {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"},
  {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"},
  {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"},
  {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"},
  {0x2C,0x01,S,"Too many windows specified"},
  {0x2C,0x02,S,"Invalid combination of windows specified"},
  {0x2D,0x00,T,"Overwrite error on update in place"},
  {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"},
  {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"},
  {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"},
  {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"},
  {0x30,0x03,D|T,"Cleaning cartridge installed"},
  {0x31,0x00,D|T|W|O,"Medium format corrupted"},
  {0x31,0x01,D|L|O,"Format command failed"},
  {0x32,0x00,D|W|O,"No defect spare location available"},
  {0x32,0x01,D|W|O,"Defect list update failure"},
  {0x33,0x00,T,"Tape length error"},
  {0x36,0x00,L,"Ribbon, ink, or toner failure"},
  {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"},
  {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"},
  {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"},
  {0x3B,0x00,T|L,"Sequential positioning error"},
  {0x3B,0x01,T,"Tape position error at beginning-of-medium"},
  {0x3B,0x02,T,"Tape position error at end-of-medium"},
  {0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"},
  {0x3B,0x04,L,"Slew failure"},
  {0x3B,0x05,L,"Paper jam"},
  {0x3B,0x06,L,"Failed to sense top-of-form"},
  {0x3B,0x07,L,"Failed to sense bottom-of-form"},
  {0x3B,0x08,T,"Reposition error"},
  {0x3B,0x09,S,"Read past end of medium"},
  {0x3B,0x0A,S,"Read past beginning of medium"},
  {0x3B,0x0B,S,"Position past end of medium"},
  {0x3B,0x0C,S,"Position past beginning of medium"},
  {0x3B,0x0D,M,"Medium destination element full"},
  {0x3B,0x0E,M,"Medium source element empty"},
  {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"},
  {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"},
  {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"},
  {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"},
  {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"},
  {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"},
  {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"},
  {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"},
  {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"},
  {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"},
  {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"},
  {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"},
  {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"},
  {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"},
  {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"},
  {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"},
  {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"},
  {0x50,0x00,T,"Write append error"},
  {0x50,0x01,T,"Write append position error"},
  {0x50,0x02,T,"Position error related to timing"},
  {0x51,0x00,T|O,"Erase failure"},
  {0x52,0x00,T,"Cartridge fault"},
  {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"},
  {0x53,0x01,T,"Unload tape failure"},
  {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"},
  {0x54,0x00,P,"Scsi to host system interface failure"},
  {0x55,0x00,P,"System resource failure"},
  {0x57,0x00,R,"Unable to recover table-of-contents"},
  {0x58,0x00,O,"Generation does not exist"},
  {0x59,0x00,O,"Updated block read"},
  {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"},
  {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"},
  {0x5A,0x02,D|T|W|O,"Operator selected write protect"},
  {0x5A,0x03,D|T|W|O,"Operator selected write permit"},
  {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"},
  {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"},
  {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"},
  {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"},
  {0x5C,0x00,D|O,"Rpl status change"},
  {0x5C,0x01,D|O,"Spindles synchronized"},
  {0x5C,0x02,D|O,"Spindles not synchronized"},
  {0x60,0x00,S,"Lamp failure"},
  {0x61,0x00,S,"Video acquisition error"},
  {0x61,0x01,S,"Unable to acquire video"},
  {0x61,0x02,S,"Out of focus"},
  {0x62,0x00,S,"Scan head positioning error"},
  {0x63,0x00,R,"End of user area encountered on this track"},
  {0x64,0x00,R,"Illegal mode for this track"},
  {0, 0, 0, NULL}
};
#endif

#if (CONSTANTS & CONST_SENSE)
static const char *snstext[] = {
    "None",                     /* There is no sense information */
    "Recovered Error",          /* The last command completed successfully
                                   but used error correction */
    "Not Ready",                /* The addressed target is not ready */
    "Medium Error",             /* Data error detected on the medium */
    "Hardware Error",           /* Controller or device failure */
    "Illegal Request",
    "Unit Attention",           /* Removable medium was changed, or
                                   the target has been reset */
    "Data Protect",             /* Access to the data is blocked */
    "Blank Check",              /* Reached unexpected written or unwritten
                                   region of the medium */
    "Key=9",                    /* Vendor specific */
    "Copy Aborted",             /* COPY or COMPARE was aborted */
    "Aborted Command",          /* The target aborted the command */
    "Equal",                    /* A SEARCH DATA command found data equal */
    "Volume Overflow",          /* Medium full with still data to be written */
    "Miscompare",               /* Source data and data on the medium
                                   do not agree */
    "Key=15"                    /* Reserved */
};
#endif

/* Print sense information */
void print_sense(const char * devclass, Scsi_Cmnd * SCpnt)
{
    int i, s;
    int sense_class, valid, code;
    unsigned char * sense_buffer = SCpnt->sense_buffer;
    const char * error = NULL;
    
    sense_class = (sense_buffer[0] >> 4) & 0x07;
    code = sense_buffer[0] & 0xf;
    valid = sense_buffer[0] & 0x80;
    
    if (sense_class == 7) {	/* extended sense data */
	s = sense_buffer[7] + 8;
	if(s > sizeof(SCpnt->sense_buffer))
           s = sizeof(SCpnt->sense_buffer);
	
	if (!valid)
	    printk("extra data not valid ");
	
	if (sense_buffer[2] & 0x80)
           printk( "FMK ");	/* current command has read a filemark */
	if (sense_buffer[2] & 0x40)
           printk( "EOM ");	/* end-of-medium condition exists */
	if (sense_buffer[2] & 0x20)
           printk( "ILI ");	/* incorrect block length requested */
	
	switch (code) {
	case 0x0:
	    error = "Current";	/* error concerns current command */
	    break;
	case 0x1:
	    error = "Deferred";	/* error concerns some earlier command */
            	/* e.g., an earlier write to disk cache succeeded, but
                   now the disk discovers that it cannot write the data */
	    break;
	default:
	    error = "Invalid";
	}
	
	printk("%s error ", error);
	
#if (CONSTANTS & CONST_SENSE)
	printk( "%s%s: sense key %s\n", devclass,
	       kdevname(SCpnt->request.rq_dev), snstext[sense_buffer[2] & 0x0f]);
#else
	printk("%s%s: sns = %2x %2x\n", devclass,
	       kdevname(SCpnt->request.rq_dev), sense_buffer[0], sense_buffer[2]);
#endif
	
	/* Check to see if additional sense information is available */
	if(sense_buffer[7] + 7 < 13 ||
	   (sense_buffer[12] == 0  && sense_buffer[13] ==  0)) goto done;
	
#if (CONSTANTS & CONST_XSENSE)
	for(i=0; additional[i].text; i++)
	    if(additional[i].code1 == sense_buffer[12] &&
	       additional[i].code2 == sense_buffer[13])
		printk("Additional sense indicates %s\n", additional[i].text);
	
	for(i=0; additional2[i].text; i++)
	    if(additional2[i].code1 == sense_buffer[12] &&
	       additional2[i].code2_min >= sense_buffer[13]  &&
	       additional2[i].code2_max <= sense_buffer[13]) {
		printk("Additional sense indicates ");
		printk(additional2[i].text, sense_buffer[13]);
		printk("\n");
	    };
#else
	printk("ASC=%2x ASCQ=%2x\n", sense_buffer[12], sense_buffer[13]);
#endif
    } else {	/* non-extended sense data */

         /*
          * Standard says:
          *    sense_buffer[0] & 0200 : address valid
          *    sense_buffer[0] & 0177 : vendor-specific error code
          *    sense_buffer[1] & 0340 : vendor-specific
          *    sense_buffer[1..3] : 21-bit logical block address
          */
	
#if (CONSTANTS & CONST_SENSE)
	if (sense_buffer[0] < 15)
	    printk("%s%s: old sense key %s\n", devclass,
	      kdevname(SCpnt->request.rq_dev), snstext[sense_buffer[0] & 0x0f]);
	else
#endif
	    printk("%s%s: sns = %2x %2x\n", devclass,
	      kdevname(SCpnt->request.rq_dev), sense_buffer[0], sense_buffer[2]);
	
	printk("Non-extended sense class %d code 0x%0x ", sense_class, code);
	s = 4;
    }
    
 done:
#if !(CONSTANTS & CONST_SENSE)
    printk("Raw sense data:");
    for (i = 0; i < s; ++i) 
	printk("0x%02x ", sense_buffer[i]);
    printk("\n");
#endif
    return;
}

#if (CONSTANTS & CONST_MSG) 
static const char *one_byte_msgs[] = {
/* 0x00 */ "Command Complete", NULL, "Save Pointers",
/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", 
/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", 
/* 0x0f */ "Initiate Recovery", "Release Recovery"
};

#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs)  / sizeof (const char *))

static const char *two_byte_msgs[] = {
/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag"
/* 0x23 */ "Ignore Wide Residue"
};

#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs)  / sizeof (const char *))

static const char *extended_msgs[] = {
/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request"
};

#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs)  / sizeof (const char *))
#endif /* (CONSTANTS & CONST_MSG) */

int print_msg (const unsigned char *msg) {
    int len = 0, i;
    if (msg[0] == EXTENDED_MESSAGE) {
	len = 3 + msg[1];
#if (CONSTANTS & CONST_MSG)
	if (msg[2] < NO_EXTENDED_MSGS)
	    printk ("%s ", extended_msgs[msg[2]]); 
	else 
	    printk ("Extended Message, reserved code (0x%02x) ", (int) msg[2]);
	switch (msg[2]) {
	case EXTENDED_MODIFY_DATA_POINTER:
	    printk("pointer = %d", (int) (msg[3] << 24) | (msg[4] << 16) | 
		   (msg[5] << 8) | msg[6]);
	    break;
	case EXTENDED_SDTR:
	    printk("period = %d ns, offset = %d", (int) msg[3] * 4, (int) 
		   msg[4]);
	    break;
	case EXTENDED_WDTR:
	    printk("width = 2^%d bytes", msg[3]);
	    break;
	default:
	    for (i = 2; i < len; ++i) 
		printk("%02x ", msg[i]);
	}
#else
	for (i = 0; i < len; ++i)
	    printk("%02x ", msg[i]);
#endif
	/* Identify */
    } else if (msg[0] & 0x80) {
#if (CONSTANTS & CONST_MSG)
	printk("Identify disconnect %sallowed %s %d ",
	       (msg[0] & 0x40) ? "" : "not ",
	       (msg[0] & 0x20) ? "target routine" : "lun",
	       msg[0] & 0x7);
#else
	printk("%02x ", msg[0]);
#endif
	len = 1;
	/* Normal One byte */
    } else if (msg[0] < 0x1f) {
#if (CONSTANTS & CONST_MSG)
	if (msg[0] < NO_ONE_BYTE_MSGS)
	    printk(one_byte_msgs[msg[0]]);
	else
	    printk("reserved (%02x) ", msg[0]);
#else
	printk("%02x ", msg[0]);
#endif
	len = 1;
	/* Two byte */
    } else if (msg[0] <= 0x2f) {
#if (CONSTANTS & CONST_MSG)
	if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS)
	    printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], 
		   msg[1]);
	else 
	    printk("reserved two byte (%02x %02x) ", 
		   msg[0], msg[1]);
#else
	printk("%02x %02x", msg[0], msg[1]);
#endif
	len = 2;
    } else 
#if (CONSTANTS & CONST_MSG)
	printk(reserved);
#else
    printk("%02x ", msg[0]);
#endif
    return len;
}

void print_Scsi_Cmnd (Scsi_Cmnd *cmd) {
    printk("scsi%d : destination target %d, lun %d\n", 
	   cmd->host->host_no, 
	   cmd->target, 
	   cmd->lun);
    printk("        command = ");
    print_command (cmd->cmnd);
}

#if (CONSTANTS & CONST_HOST)
static const char * hostbyte_table[]={
"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", 
"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",NULL};

void print_hostbyte(int scsiresult)
{   static int maxcode=0;
    int i;
   
    if(!maxcode) {
	for(i=0;hostbyte_table[i];i++) ;
	maxcode=i-1;
    }
    printk("Hostbyte=0x%02x",host_byte(scsiresult));
    if(host_byte(scsiresult)>maxcode) {
	printk("is invalid "); 
	return;
    }
    printk("(%s) ",hostbyte_table[host_byte(scsiresult)]);
}
#else
void print_hostbyte(int scsiresult)
{   printk("Hostbyte=0x%02x ",host_byte(scsiresult));
}
#endif

#if (CONSTANTS & CONST_DRIVER)
static const char * driverbyte_table[]={
"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR", 
"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD",NULL };

static const char * driversuggest_table[]={"SUGGEST_OK",
"SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE",
unknown,unknown,unknown, "SUGGEST_SENSE",NULL};


void print_driverbyte(int scsiresult)
{   static int driver_max=0,suggest_max=0;
    int i,dr=driver_byte(scsiresult)&DRIVER_MASK, 
	su=(driver_byte(scsiresult)&SUGGEST_MASK)>>4;

    if(!driver_max) {
        for(i=0;driverbyte_table[i];i++) ;
        driver_max=i;
	for(i=0;driversuggest_table[i];i++) ;
	suggest_max=i;
    }
    printk("Driverbyte=0x%02x",driver_byte(scsiresult));
    printk("(%s,%s) ",
	dr<driver_max  ? driverbyte_table[dr]:"invalid",
	su<suggest_max ? driversuggest_table[su]:"invalid");
}
#else
void print_driverbyte(int scsiresult)
{   printk("Driverbyte=0x%02x ",driver_byte(scsiresult));
}
#endif

/*
 * Overrides for Emacs so that we almost follow Linus's tabbing style.
 * Emacs will notice this stuff at the end of the file and automatically
 * adjust the settings for this buffer only.  This must remain at the end
 * of the file.
 * ---------------------------------------------------------------------------
 * Local variables:
 * c-indent-level: 4
 * c-brace-imaginary-offset: 0
 * c-brace-offset: -4
 * c-argdecl-indent: 4
 * c-label-offset: -4
 * c-continued-statement-offset: 4
 * c-continued-brace-offset: 0
 * indent-tabs-mode: nil
 * tab-width: 8
 * End:
 */