summaryrefslogtreecommitdiff
path: root/i386
diff options
context:
space:
mode:
Diffstat (limited to 'i386')
-rw-r--r--i386/README-Drivers297
1 files changed, 5 insertions, 292 deletions
diff --git a/i386/README-Drivers b/i386/README-Drivers
index 042d048..3d1066c 100644
--- a/i386/README-Drivers
+++ b/i386/README-Drivers
@@ -1,46 +1,12 @@
-*- text -*-
-** Turning on or off device drivers
+Here some i386 specific details of the device drivers are explained.
-Each device driver has an associated configure switch. The table at the
-end of this file indicates whether a device driver is enabled by default
-or not. It also gives --- if possible at all --- the configure switches
-to use for disabling or enabling device drivers, in case you're not
-satisfied with the default choices. Where a `--disable-*' switch is
-given in the table, the device driver is enabled by default and you have
-to use the switch to disable it and vice versa for the `--enable-*'
-switches, the device driver is disabled by default and you have to us the
-switch to enable it. To have all device drivers disabled that can be
-disabled and would otherwise have been enabled by default you can specify
-the `--disable-default-device-drivers' switch and then use the
-`--enable-*' switches to enable only those you actually want to have
-enabled.
+Each driver is followed by one or more triplets of three numbers. These
+triplets specify combinations of I/O address, spl, and, pic that are believed
+to work.
-
-** What the configure switches do
-
-Each configure switch has two effects. First, it defines a CPP symbol
-that turns on or off the hooks that autoconfigure the device and add
-it to the list of available devices. Second, it adds the source code
-for the driver to a make variable so that the code for the driver is
-compiled and linked into the kernel.
-
-
-** What are those extra numbers
-
-Each driver is followed by one or more triplets of three numbers.
-These triplets specify combinations of I/O address, spl, and, pic that
-are believed to work.
-
-
-** Then comes the name of the device to users. %d is a unit number.
-
-
-** Source files
-
-All source file names are relative to [GNU Mach]/i386/i386at/ for
-Mach drivers, and the Linux drivers's files can be found below
-[GNU Mach]/linux/.
+Then comes the name of the device to users. `%d' is a unit number.
** Table
@@ -52,7 +18,6 @@ PC com ports (always enabled)
com%d
Parallel port
- --disable-lpr lpr.c
lpr%d
System Console (always enabled)
@@ -82,328 +47,76 @@ Interface to setting up IO port access for users (always enabled)
*** Disk controllers (except for SCSI)
PC floppy
- --disable-floppy block/floppy.c
0x3f0, 370
fd%d
-IDE disks
- --disable-ide block/{cmd640,ide-cd,ide,rz1000,triton}.c
- hd%d (disks)
- wcd%d (cdroms)
-
-
-*** SCSI disks
-
-Disks all show up as `sd%d'. CD Roms all show up as `cd%d'. Tapes and
-generic are not currently supported.
-
-AdvanSys
- --disable-advansys scsi/advansys.c
-
-BusLogic
- --disable-BusLogic scsi/{BusLogic,FlashPoint}.c
- --enable-flashpoint (if you want to omit FlashPoint support)
-
-UltraStor 14F/34F
- --disable-u14-34f scsi/u14-34f.c
-
-UlstraStor
- --disable-ultrastor scsi/ultrastor.c
-
-Adaptec AHA-152x/2825 (aha152x, aha2825)
- --disable-aha152x scsi/aha152x.c
-
-Adaptec AHA-1542
- --disable-aha1542 scsi/aha1540.c
-
-Adaptec AHA-1740
- --disable-aha1740 scsi/aha1740.c
-
-Adaptec AIC7xxx
- --disable-aic7xxx scsi/aic7xxx.c
-
-Future Domain 16xx
- --disable-fdomain scsi/fdomain.c
-
-Always IN 2000
- --disable-in2000 scsi/in2000.c
-
-Generic NCR5380/53c400 (ncr5380, ncr53c400)
- --enable-g_NCR5380 scsi/g_NCR5380.c
-
-NCR53c406a chip
- --enable-NCR53c406a scsi/NCR53c406a.c
-
-PAS16
- --disable-pas16 scsi/pas16.c
-
-Seagate ST02, Future Domain TMC-8xx
- --disable-seagate scsi/seagate.c
-
-Trantor T128/T128F/T228 (t128, t128f, t228)
- --disable-t128 scsi/t128.c
-
-NCR 53C7,8xx
- --disable-ncr53c78xx scsi/53c78xx.c
-
-EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix)
- --enable-eata_dma scsi/eata_dma.c
-
-EATA-PIO (old DPT PM2001, PM2012A)
- --disable-eata_pio scsi/eata_pio.c
-
-WD 7000
- --disable-wd7000 scsi/wd7000.c
-
-EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)
- --disable-eata scsi/eata.c
-
-AM53/79C974 (am53c974, am79c974)
- --disable-AM53C974 scsi/AM53C974.c
-
-DTC3180/3280 (dtc3180, dtc3280)
- --disable-dtc scsi/dtc.c
-
-NCR53C8XX (ncr53c8xx, dc390f, dc390u, dc390w)
- --disable-ncr53c8xx scsi/ncr53c8xx.c
-
-Tekram DC-390(T) (dc390, dc390t)
- --disable-tmscsim scsi/tmscsim.c
-
-IOMEGA Parallel Port ZIP drive
- --disable-ppa scsi/ppa.c
-
-Qlogic FAS
- --disable-qlogicfas scsi/qlogicfas.c
-
-Qlogic ISP
- --disable-qlogicisp scsi/qlogicisp.c
-
-GDT SCSI Disk Array Controller
- --disable-gdth scsi/gdth.c
-
*** Ethernet controllers
These all show up as `eth%d' except the atp device.
NE2000/NE1000 ISA (ne, ne1000, ne2000)
- --disable-ne net/ne.c net/8390.c
0x300,280,320,340,360
3Com 503 (3c503) / Etherlink II
- --disable-3c503 net/3c503.c net/8390.c
0x300,310,330,350,250,280,2a0,2e0
-3Com 509/579 (3c509, 3c579) / Etherlink III
- --disable-3c509 net/3c509.c
-
WD80x3
- --disable-wd net/wd.c, net/8390.c
0x300,280,380,240
3COM 501 (3c501) / Etherlink I
- --disable-3c501 net/3c501.c
0x280,300
SMC Ultra
- --disable-smc-ultra net/smc-ultra.c net/8390.c
0x200,220,240,280,300,340,380
-SMC Ultra32
- --disable-smc-ultra32 net/smc-ultra32.c net/8390.c
-
HP PCLAN+ (27247B and 27252A)
- --disable-hp-plus net/hp-plus.c net/8390.c
0x200,240,280,2c0,300,320,340
HP PCLAN (27245 and other 27xxx series)
- --disable-hp net/hp.c, net/8390.c
0x300,320,340,280,2c0,200,240
-3Com 59x/90x (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang"
- --disable-3c59x net/3c59x.c
-
Seeq8005
- --disable-seeq8005 net/seeq8005.c
0x300,320,340,360
-HP 10/100VG PCLAN (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b)
- --disable-hp100 net/hp100.c
-
-Ansel Communications EISA 3200
- --disable-ac3200 net/ac3200.c, net/8390.c
-
Cabletron E21xx
- --disable-e2100 net/e2100.c, net/8390.c
0x300,280,380,220
AT1700 (Fujitsu 86965)
- --disable-at1700 net/at1700.c
0x260,280,2a0,240,340,320,380,300
ICL EtherTeam 16i/32 (eth16i, eth32)
- --disable-eth16i net/eth16i.c
0x260,280,2a0,240,340,320,380,300 (16i)
-Zenith Z-Note (znet, znote)
- --disable-znet net/znet.c
-
EtherExpress 16
- --disable-eexpress net/eexpress.c
0x300,270,320,340
EtherExpressPro
- --disable-eepro net/eepro.c
0x200,240,280,2c0,300,320,340,360
-Intel EtherExpressPro PCI 10+/100B/100+
- --disable-eepro100 net/eepro100.c
-
-DEPCA (de100, de101, de200, de201, de202, de210, de422)
- --disable-depca net/depca.c
-
-EtherWORKS 3 (ewrk3, de203, de204, de205)
- --disable-ewrk3 net/ewrk3.c
-
-DE4x5 (de4x5, de425, de434, de435, de450, de500)
- --disable-de4x5 net/de4x5.c
-
-Apricot XEN-II on board ethernet
- --disable-apricot net/apricot.c
-
AT&T WaveLAN & DEC RoamAbout DS
- --enable-wavelan net/wavelan.c
0x390
3Com 507 (3c507, el16)
- --disable-3c507 net/3c507.c
0x300,320,340,280
3Com 505 (3c505, elplus)
- --disable-3c505 net/3c505.c
0x300,280,310
D-Link DE-600
- --disable-de600 net/de600.c
0x378
D-Link DE-620
- --disable-de620 net/de620.c
0x378
Schneider & Koch G16
- --disable-sk_g16 net/sk_g16.c
0x100,180,208,220,288,320,328,390
NI5210
- --disable-ni52 net/ni52.c
0x300,280,360,320,340
NI6510
- --disable-ni65 net/ni65.c
0x300/320/340/360
AT-LAN-TEC/RealTek pocket adaptor
- --enable-atp net/atp.c
0x378,278,3bc
atp%d
-
-AMD LANCE and PCnet (at1500, ne2100)
- --disable-lance net/lance.c
-
-DECchip Tulip (dc21x4x) PCI (elcp, tulip)
- --disable-tulip net/tulip.c
-
-FMV-181/182/183/184
- --disable-fmv18x net/fmv18x.c
-
-3Com 515 ISA Fast EtherLink
- --disable-3c515 net/3c515.c
-
-AMD PCI PCnet32 (PCI bus NE2100 cards)
- --disable-pcnet32 net/pcnet32.c
-
-PCI NE2000
- --disable-ne2k-pci net/ne2k-pci.c
-
-Packet Engines Yellowfin Gigabit-NIC
- --disable-yellowfin net/yellowfin.c
-
-RealTek 8129/8139 (rtl8129, rtl8139) (not 8019/8029!)
- --disable-rtl8139 net/rtl8139.c
-
-SMC 83c170/175 EPIC/100 (epic, epic100) / EtherPower II
- --disable-epic100 net/epic100.c
-
-TI ThunderLAN
- --disable-tlan net/tlan.c
-
-VIA Rhine
- --disable-via-rhine net/via-rhine.c
-
-Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet
- --disable-hamachi net/hamachi.c
-
-Intel PCI Gigabit Ethernet
- --disable-intel-gige net/intel-gige.c
-
-Myson MTD803 Ethernet adapter series
- --disable-myson803 net/myson803.c
-
-National Semiconductor DP8381x series PCI Ethernet
- --disable-natsemi net/natsemi.c
-
-National Semiconductor DP8382x series PCI Ethernet
- --disable-ns820 net/ns820.c
-
-Adaptec Starfire network adapter
- --disable-starfire net/starfire.c
-
-Sundance ST201 "Alta" PCI Ethernet
- --disable-sundance net/sundance.c
-
-Winbond W89c840 PCI Ethernet
- --disable-winbond-840 net/winbond-840.c
-
-*** pcmcia bridge drivers
-
-All source files are relative to [GNU Mach]/linux/pcmcia-cs.
-
-Intel 82365 PC Card controller
- --disable-i82365 modules/i82365.c
-
-Disable scan for ISA interrupts at startup
- --disable-pcmcia-isa
-
-*** pcmcia device drivers
-
-These all show up as `eth%d'.
-
-All source files are relative to [GNU Mach]/linux/pcmcia-cs.
-
-3Com 3c574 ``RoadRunner'' PCMCIA Ethernet
- --disable-3c574_cs clients/3c574_cs.c
-
-3Com 3c589 PCMCIA Ethernet card
- --disable-3c589_cs clients/3c589_cs.c
-
-Asix AX88190-based PCMCIA Ethernet adapters
- --disable-axnet_cs clients/axnet_cs.c
-
-fmvj18x chipset based PCMCIA Ethernet cards
- --disable-fmvj18x_cs clients/fmvj18x_cs.c
-
-New Media Ethernet LAN PCMCIA cards
- --disable-nmclan_cs clients/nmclan_cs.c
-
-NS8390-based PCMCIA cards
- --disable-pcnet_cs clients/pcnet_cs.c
-
-SMC91c92-based PCMCIA cards
- --disable-smc91c92_cs clients/smc91c92_cs.c
-
-Xircom CreditCard and Realport PCMCIA ethernet
- --disable-xirc2ps_cs clients/xirc2ps_cs.c
-
-Hermes or Prism 2 PCMCIA Wireless adapters (Orinoco)
- --disable-orinoco_cs wireless/orinoco_cs.c