diff options
Diffstat (limited to 'i386/pc')
43 files changed, 0 insertions, 3371 deletions
diff --git a/i386/pc/NOTES b/i386/pc/NOTES deleted file mode 100644 index d165aa4..0000000 --- a/i386/pc/NOTES +++ /dev/null @@ -1,34 +0,0 @@ - - -i16_raw.c: - Provides a default implementation - of real/pmode switching code. - Assumes that, as far as it's concerned, - low linear address always map to physical addresses. - (The low linear mappings can be changed, - but must be changed back before switching back to real mode.) - - Provides: - i16_raw_switch_to_pmode() - i16_raw_switch_to_real_mode() - - i16_raw_start() - Called in real mode. - Initializes the pmode switching system, - switches to pmode for the first time, - and calls the 32-bit function raw_start(). - - Depends on: - - paging.h: - raw_paging_enable() - raw_paging_disable() - raw_paging_init() - - a20.h: - i16_enable_a20() - i16_disable_a20() - - real.h: - real_cs - diff --git a/i386/pc/debug.h b/i386/pc/debug.h deleted file mode 100644 index 6265082..0000000 --- a/i386/pc/debug.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _KUKM_I386_PC_DEBUG_H_ -#define _KUKM_I386_PC_DEBUG_H_ - -#ifdef ASSEMBLER -#ifdef DEBUG - - -/* Poke a character directly onto the VGA text display, - as a very quick, mostly-reliable status indicator. - Assumes ss is a kernel data segment register. */ -#define POKE_STATUS(char,scratch) \ - ss/*XXX gas bug */ ;\ - movl %ss:_phys_mem_va,scratch ;\ - addl $0xb8000+80*2*13+40*2,scratch ;\ - movb char,%ss:(scratch) ;\ - movb $0xf0,%ss:1(scratch) - - -#else !DEBUG - -#define POKE_STATUS(char,scratch) - -#endif !DEBUG -#else !ASSEMBLER -#ifdef DEBUG - -#include <mach/machine/vm_types.h> - - -#define POKE_STATUS(string) \ - ({ unsigned char *s = (string); \ - extern vm_offset_t phys_mem_va; \ - short *d = (short*)(phys_mem_va+0xb8000+80*2*13+40*2); \ - while (*s) { (*d++) = 0x3000 | (*s++); } \ - *d = ' '; \ - }) - - -#else !DEBUG - -#define POKE_STATUS(char) - -#endif !DEBUG -#endif !ASSEMBLER - - -#include_next "debug.h" - -#endif _KUKM_I386_PC_DEBUG_H_ diff --git a/i386/pc/exit.c b/i386/pc/exit.c deleted file mode 100644 index 59c9383..0000000 --- a/i386/pc/exit.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include "real.h" - -void _exit(int rc) -{ - about_to_die(rc); - - (*real_exit)(rc); -} - diff --git a/i386/pc/gdt.h b/i386/pc/gdt.h deleted file mode 100644 index 8dae857..0000000 --- a/i386/pc/gdt.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include_next "gdt.h" - -/* If we have a REAL_TSS, use that as our DEFAULT_TSS if necessary. - (The DEFAULT_TSS gets loaded by cpu_tables_load() upon switching to pmode.) */ -#if defined(ENABLE_REAL_TSS) && !defined(DEFAULT_TSS) -#define DEFAULT_TSS REAL_TSS -#define DEFAULT_TSS_IDX REAL_TSS_IDX -#endif - diff --git a/i386/pc/gdt_sels.h b/i386/pc/gdt_sels.h deleted file mode 100644 index 18e0907..0000000 --- a/i386/pc/gdt_sels.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include_next "gdt_sels.h" - -#ifdef ENABLE_REAL_TSS - -/* This is a special TSS with a full IO bitmap - that allows access to all I/O ports in v86 mode. - It's used for making calls to the real-mode BIOS (or DOS). */ -gdt_sel(REAL_TSS) - -#endif - diff --git a/i386/pc/i16/i16_a20.c b/i386/pc/i16/i16_a20.c deleted file mode 100644 index 5e91f86..0000000 --- a/i386/pc/i16/i16_a20.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - - -#include <mach/machine/pio.h> -#include <mach/machine/code16.h> - -#include "i16_a20.h" - - -/* Keyboard stuff for turning on the A20 address line (gak!). */ -#define K_RDWR 0x60 /* keyboard data & cmds (read/write) */ -#define K_STATUS 0x64 /* keyboard status (read-only) */ -#define K_CMD 0x64 /* keybd ctlr command (write-only) */ - -#define K_OBUF_FUL 0x01 /* output buffer full */ -#define K_IBUF_FUL 0x02 /* input buffer full */ - -#define KC_CMD_WIN 0xd0 /* read output port */ -#define KC_CMD_WOUT 0xd1 /* write output port */ - -#define KB_ENABLE_A20 0xdf /* Linux and my BIOS uses this, - and I trust them more than Mach 3.0, - but I'd like to know what the difference is - and if it matters. */ - /*0x9f*/ /* enable A20, - enable output buffer full interrupt - enable data line - disable clock line */ -#define KB_DISABLE_A20 0xdd - - -CODE16 - - -/* - This routine ensures that the keyboard command queue is empty - (after emptying the output buffers) - - No timeout is used - if this hangs there is something wrong with - the machine, and we probably couldn't proceed anyway. - XXX should at least die properly -*/ -static void i16_empty_8042(void) -{ - int status; - -retry: - i16_nanodelay(1000); - status = i16_inb(K_STATUS); - - if (status & K_OBUF_FUL) - { - i16_nanodelay(1000); - i16_inb(K_RDWR); - goto retry; - } - - if (status & K_IBUF_FUL) - goto retry; -} - -int i16_raw_test_a20(void); - -/* Enable the A20 address line. */ -void i16_raw_enable_a20(void) -{ - int v; - - /* XXX try int 15h function 24h */ - - if (i16_raw_test_a20()) - return; - - /* PS/2 */ - v = i16_inb(0x92); - i16_nanodelay(1000); - i16_outb(0x92,v | 2); - - if (i16_raw_test_a20()) - return; - - /* AT */ - i16_empty_8042(); - i16_outb(K_CMD, KC_CMD_WOUT); - i16_empty_8042(); - i16_outb(K_RDWR, KB_ENABLE_A20); - i16_empty_8042(); - - /* Wait until the a20 line gets enabled. */ - while (!i16_raw_test_a20()); -} - -/* Disable the A20 address line. */ -void i16_raw_disable_a20(void) -{ - int v; - - if (!i16_raw_test_a20()) - return; - - /* PS/2 */ - v = i16_inb(0x92); - i16_nanodelay(1000); - i16_outb(0x92, v & ~2); - - if (!i16_raw_test_a20()) - return; - - /* AT */ - i16_empty_8042(); - i16_outb(K_CMD, KC_CMD_WOUT); - i16_empty_8042(); - i16_outb(K_RDWR, KB_DISABLE_A20); - i16_empty_8042(); - - /* Wait until the a20 line gets disabled. */ - while (i16_raw_test_a20()); -} - - -void (*i16_enable_a20)(void) = i16_raw_enable_a20; -void (*i16_disable_a20)(void) = i16_raw_disable_a20; - diff --git a/i386/pc/i16/i16_a20.h b/i386/pc/i16/i16_a20.h deleted file mode 100644 index afe124b..0000000 --- a/i386/pc/i16/i16_a20.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I386_PC_A20_H_ -#define _I386_PC_A20_H_ - -/* By default these point to the "raw" routines in pc/a20.c. - They can be revectored to other routines, - e.g. to use a HIMEM driver's facilities. */ -extern void (*i16_enable_a20)(void); -extern void (*i16_disable_a20)(void); - -#endif _I386_PC_A20_H_ diff --git a/i386/pc/i16/i16_bios.h b/i386/pc/i16/i16_bios.h deleted file mode 100644 index 29dc2d8..0000000 --- a/i386/pc/i16/i16_bios.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I16_BIOS_H_ -#define _I16_BIOS_H_ - -#include <mach/inline.h> - - -MACH_INLINE void i16_bios_putchar(int c) -{ - asm volatile("int $0x10" : : "a" (0x0e00 | (c & 0xff)), "b" (0x07)); -} - -MACH_INLINE int i16_bios_getchar() -{ - int c; - asm volatile("int $0x16" : "=a" (c) : "a" (0x0000)); - c &= 0xff; - return c; -} - -MACH_INLINE void i16_bios_warm_boot(void) -{ - asm volatile(" - cli - movw $0x40,%ax - movw %ax,%ds - movw $0x1234,0x72 - ljmp $0xffff,$0x0000 - "); -} - -MACH_INLINE void i16_bios_cold_boot(void) -{ - asm volatile(" - cli - movw $0x40,%ax - movw %ax,%ds - movw $0x0000,0x72 - ljmp $0xffff,$0x0000 - "); -} - -MACH_INLINE unsigned char i16_bios_copy_ext_mem( - unsigned src_la, unsigned dest_la, unsigned short word_count) -{ - char buf[48]; - unsigned short i, rc; - - /* Initialize the descriptor structure. */ - for (i = 0; i < sizeof(buf); i++) - buf[i] = 0; - *((unsigned short*)(buf+0x10)) = 0xffff; /* source limit */ - *((unsigned long*)(buf+0x12)) = src_la; /* source linear address */ - *((unsigned char*)(buf+0x15)) = 0x93; /* source access rights */ - *((unsigned short*)(buf+0x18)) = 0xffff; /* dest limit */ - *((unsigned long*)(buf+0x1a)) = dest_la; /* dest linear address */ - *((unsigned char*)(buf+0x1d)) = 0x93; /* dest access rights */ - -#if 0 - i16_puts("buf:"); - for (i = 0; i < sizeof(buf); i++) - i16_writehexb(buf[i]); - i16_puts(""); -#endif - - /* Make the BIOS call to perform the copy. */ - asm volatile(" - int $0x15 - " : "=a" (rc) - : "a" ((unsigned short)0x8700), - "c" (word_count), - "S" ((unsigned short)(unsigned)buf)); - - return rc >> 8; -} - -#endif _I16_BIOS_H_ diff --git a/i386/pc/i16/i16_exit.c b/i386/pc/i16/i16_exit.c deleted file mode 100644 index 674033a..0000000 --- a/i386/pc/i16/i16_exit.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/code16.h> - -#include "i16_bios.h" - - -CODE16 - -void i16_exit(int rc) -{ - i16_puts("Press any key to reboot."); - i16_bios_getchar(); - i16_bios_warm_boot(); -} - diff --git a/i386/pc/i16/i16_ext_mem.c b/i386/pc/i16/i16_ext_mem.c deleted file mode 100644 index 08cbecf..0000000 --- a/i386/pc/i16/i16_ext_mem.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/code16.h> -#include <mach/machine/vm_types.h> -#include <mach/machine/far_ptr.h> -#include <mach/machine/proc_reg.h> - -#include "i16_bios.h" -#include "phys_mem.h" -#include "vm_param.h" -#include "debug.h" - - -static vm_offset_t ext_mem_phys_free_mem; -static vm_size_t ext_mem_phys_free_size; - - -CODE32 - -int ext_mem_collect(void) -{ - if (ext_mem_phys_free_mem) - { - phys_mem_add(ext_mem_phys_free_mem, ext_mem_phys_free_size); - ext_mem_phys_free_mem = 0; - } -} - -CODE16 - -void i16_ext_mem_check() -{ - vm_offset_t ext_mem_top, ext_mem_bot; - unsigned short ext_mem_k; - - /* Find the top of available extended memory. */ - asm volatile(" - int $0x15 - jnc 1f - xorw %%ax,%%ax - 1: - " : "=a" (ext_mem_k) - : "a" (0x8800)); - ext_mem_top = 0x100000 + (vm_offset_t)ext_mem_k * 1024; - - /* XXX check for >16MB memory using function 0xc7 */ - - ext_mem_bot = 0x100000; - - /* Check for extended memory allocated bottom-up: method 1. - This uses the technique (and, loosely, the code) - described in the VCPI spec, version 1.0. */ - if (ext_mem_top > ext_mem_bot) - { - asm volatile(" - pushw %%es - - xorw %%ax,%%ax - movw %%ax,%%es - movw %%es:0x19*4+2,%%ax - movw %%ax,%%es - - movw $0x12,%%di - movw $7,%%cx - rep - cmpsb - jne 1f - - xorl %%edx,%%edx - movb %%es:0x2e,%%dl - shll $16,%%edx - movw %%es:0x2c,%%dx - - 1: - popw %%es - " : "=d" (ext_mem_bot) - : "d" (ext_mem_bot), - "S" ((unsigned short)(vm_offset_t)"VDISK V") - : "eax", "ecx", "esi", "edi"); - } - i16_assert(ext_mem_bot >= 0x100000); - - /* Check for extended memory allocated bottom-up: method 2. - This uses the technique (and, loosely, the code) - described in the VCPI spec, version 1.0. */ - if (ext_mem_top > ext_mem_bot) - { - struct { - char pad1[3]; - char V; - long DISK; - char pad2[30-8]; - unsigned short addr; - } buf; - unsigned char rc; - - i16_assert(sizeof(buf) == 0x20); - rc = i16_bios_copy_ext_mem(0x100000, kvtolin((vm_offset_t)&buf), sizeof(buf)/2); - if ((rc == 0) && (buf.V == 'V') && (buf.DISK == 'DISK')) - { - vm_offset_t new_bot = (vm_offset_t)buf.addr << 10; - i16_assert(new_bot > 0x100000); - if (new_bot > ext_mem_bot) - ext_mem_bot = new_bot; - } - } - i16_assert(ext_mem_bot >= 0x100000); - - if (ext_mem_top > ext_mem_bot) - { - ext_mem_phys_free_mem = ext_mem_bot; - ext_mem_phys_free_size = ext_mem_top - ext_mem_bot; - - /* We need to update phys_mem_max here - instead of just letting phys_mem_add() do it - when the memory is collected with phys_mem_collect(), - because VCPI initialization needs to know the top of physical memory - before phys_mem_collect() is called. - See i16_vcpi.c for the gross details. */ - if (ext_mem_top > phys_mem_max) - phys_mem_max = ext_mem_top; - } -} - -void i16_ext_mem_shutdown() -{ - /* We didn't actually allocate the memory, - so no need to deallocate it... */ -} - diff --git a/i386/pc/i16/i16_init.c b/i386/pc/i16/i16_init.c deleted file mode 100644 index 23a51df..0000000 --- a/i386/pc/i16/i16_init.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/code16.h> -#include <mach/machine/proc_reg.h> - -#include "vm_param.h" - - -/* Code segment we originally had when we started in real mode. */ -unsigned short real_cs; - -/* Virtual address of physical memory. */ -vm_offset_t phys_mem_va; - -/* Physical address of start of boot image. */ -vm_offset_t boot_image_pa; - -/* Upper limit of known physical memory. */ -vm_offset_t phys_mem_max; - - -CODE16 - -#include "i16_bios.h" - -/* Called by i16_crt0 (or the equivalent) - to set up our basic 16-bit runtime environment - before calling i16_main(). */ -void i16_init(void) -{ - /* Find our code/data/everything segment. */ - real_cs = get_cs(); - - /* Find out where in physical memory we got loaded. */ - boot_image_pa = real_cs << 4; - - /* Find out where the bottom of physical memory is. - (We won't be able to directly use it for 32-bit accesses - until we actually get into 32-bit mode.) */ - phys_mem_va = -boot_image_pa; - - /* The base of linear memory is at the same place, - at least until we turn paging on. */ - linear_base_va = phys_mem_va; -} - diff --git a/i386/pc/i16/i16_main.c b/i386/pc/i16/i16_main.c deleted file mode 100644 index 328cceb..0000000 --- a/i386/pc/i16/i16_main.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/code16.h> - - -CODE16 - -void i16_main(void) -{ - i16_init(); - - /* Grab all the memory we can find. */ - i16_ext_mem_check(); - - i16_raw_start(); -} - diff --git a/i386/pc/i16/i16_pic.c b/i386/pc/i16/i16_pic.c deleted file mode 100644 index 3ff2697..0000000 --- a/i386/pc/i16/i16_pic.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/pio.h> - -#include "pic.h" -#include "i16.h" - -CODE16 - -/* Program the PICs to use a different set of interrupt vectors. - Assumes processor I flag is off. */ -void i16_pic_set_master(int base) -{ - unsigned char old_mask; - - /* Save the original interrupt mask. */ - old_mask = inb(MASTER_OCW); PIC_DELAY(); - - /* Initialize the master PIC. */ - outb(MASTER_ICW, PICM_ICW1); PIC_DELAY(); - outb(MASTER_OCW, base); PIC_DELAY(); - outb(MASTER_OCW, PICM_ICW3); PIC_DELAY(); - outb(MASTER_OCW, PICM_ICW4); PIC_DELAY(); - - /* Restore the original interrupt mask. */ - outb(MASTER_OCW, old_mask); PIC_DELAY(); -} - -void i16_pic_set_slave(int base) -{ - unsigned char old_mask; - - /* Save the original interrupt mask. */ - old_mask = inb(SLAVES_OCW); PIC_DELAY(); - - /* Initialize the slave PIC. */ - outb(SLAVES_ICW, PICS_ICW1); PIC_DELAY(); - outb(SLAVES_OCW, base); PIC_DELAY(); - outb(SLAVES_OCW, PICS_ICW3); PIC_DELAY(); - outb(SLAVES_OCW, PICS_ICW4); PIC_DELAY(); - - /* Restore the original interrupt mask. */ - outb(SLAVES_OCW, old_mask); PIC_DELAY(); -} - diff --git a/i386/pc/i16/i16_putchar.c b/i386/pc/i16/i16_putchar.c deleted file mode 100644 index 365f4f8..0000000 --- a/i386/pc/i16/i16_putchar.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/code16.h> - -#include "i16_bios.h" - -CODE16 - -void i16_putchar(int ch) -{ - if (ch == '\n') - i16_bios_putchar('\r'); - i16_bios_putchar(ch); -} - diff --git a/i386/pc/i16/i16_raw.c b/i386/pc/i16/i16_raw.c deleted file mode 100644 index 1f705d3..0000000 --- a/i386/pc/i16/i16_raw.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -/* - This file rovides a default implementation - of real/pmode switching code. - Assumes that, as far as it's concerned, - low linear address always map to physical addresses. - (The low linear mappings can be changed, - but must be changed back before switching back to real mode.) - - Provides: - i16_raw_switch_to_pmode() - i16_raw_switch_to_real_mode() - - i16_raw_start() - Called in real mode. - Initializes the pmode switching system, - switches to pmode for the first time, - and calls the 32-bit function raw_start(). - - Depends on: - - paging.h: - raw_paging_enable() - raw_paging_disable() - raw_paging_init() - - a20.h: - i16_enable_a20() - i16_disable_a20() - - real.h: - real_cs -*/ - -#include <mach/boolean.h> -#include <mach/machine/code16.h> -#include <mach/machine/vm_param.h> -#include <mach/machine/proc_reg.h> -#include <mach/machine/pio.h> -#include <mach/machine/seg.h> -#include <mach/machine/eflags.h> -#include <mach/machine/pmode.h> - -#include "config.h" -#include "cpu.h" -#include "i16.h" -#include "vm_param.h" -#include "pic.h" -#include "debug.h" -#include "i16_a20.h" -#include "i16_switch.h" - -int irq_master_base, irq_slave_base; - -/* Set to true when everything is initialized properly. */ -static boolean_t inited; - -/* Saved value of eflags register for real mode. */ -static unsigned real_eflags; - - - -#ifdef ENABLE_PAGING -#define RAW_PAGING_ENABLE() raw_paging_enable() -#define RAW_PAGING_DISABLE() raw_paging_disable() -#define RAW_PAGING_INIT() raw_paging_init() -#else -#define RAW_PAGING_ENABLE() ((void)0) -#define RAW_PAGING_DISABLE() ((void)0) -#define RAW_PAGING_INIT() ((void)0) -#endif - - -CODE16 - -void i16_raw_switch_to_pmode() -{ - /* No interrupts from now on please. */ - i16_cli(); - - /* Save the eflags register for switching back later. */ - real_eflags = get_eflags(); - - /* Enable the A20 address line. */ - i16_enable_a20(); - - /* Load the GDT. - Note that we have to do this each time we enter pmode, - not just the first, - because other real-mode programs may have switched to pmode - and back again in the meantime, trashing the GDT pointer. */ - { - struct pseudo_descriptor pdesc; - - pdesc.limit = sizeof(cpu[0].tables.gdt)-1; - pdesc.linear_base = boot_image_pa - + (vm_offset_t)&cpu[0].tables.gdt; - i16_set_gdt(&pdesc); - } - - /* Switch into protected mode. */ - i16_enter_pmode(KERNEL_16_CS); - - /* Reload all the segment registers from the new GDT. */ - set_ds(KERNEL_DS); - set_es(KERNEL_DS); - set_fs(0); - set_gs(0); - set_ss(KERNEL_DS); - - i16_do_32bit( - - if (inited) - { - /* Turn paging on if necessary. */ - RAW_PAGING_ENABLE(); - - /* Load the CPU tables into the processor. */ - cpu_tables_load(&cpu[0]); - - /* Program the PIC so the interrupt vectors won't - conflict with the processor exception vectors. */ - pic_init(PICM_VECTBASE, PICS_VECTBASE); - } - - /* Make sure our flags register is appropriate. */ - set_eflags((get_eflags() - & ~(EFL_IF | EFL_DF | EFL_NT)) - | EFL_IOPL_USER); - ); -} - -void i16_raw_switch_to_real_mode() -{ - /* Make sure interrupts are disabled. */ - cli(); - - /* Avoid sending DOS bogus coprocessor exceptions. - XXX should we save/restore all of CR0? */ - i16_clts(); - - i16_do_32bit( - /* Turn paging off if necessary. */ - RAW_PAGING_DISABLE(); - - /* Reprogram the PIC back to the settings DOS expects. */ - pic_init(0x08, 0x70); - ); - - /* Make sure all the segment registers are 16-bit. - The code segment definitely is already, - because we're running 16-bit code. */ - set_ds(KERNEL_16_DS); - set_es(KERNEL_16_DS); - set_fs(KERNEL_16_DS); - set_gs(KERNEL_16_DS); - set_ss(KERNEL_16_DS); - - /* Switch back to real mode. */ - i16_leave_pmode(real_cs); - - /* Load the real-mode segment registers. */ - set_ds(real_cs); - set_es(real_cs); - set_fs(real_cs); - set_gs(real_cs); - set_ss(real_cs); - - /* Load the real-mode IDT. */ - { - struct pseudo_descriptor pdesc; - - pdesc.limit = 0xffff; - pdesc.linear_base = 0; - i16_set_idt(&pdesc); - } - - /* Disable the A20 address line. */ - i16_disable_a20(); - - /* Restore the eflags register to its original real-mode state. - Note that this will leave interrupts disabled - since it was saved after the cli() above. */ - set_eflags(real_eflags); -} - -void i16_raw_start() -{ - /* Make sure we're not already in protected mode. */ - if (i16_get_msw() & CR0_PE) - i16_die("The processor is in an unknown " - "protected mode environment."); - - do_debug(i16_puts("Real mode detected")); - - /* Minimally initialize the GDT. */ - i16_gdt_init_temp(); - - /* Switch to protected mode for the first time. - This won't load all the processor tables and everything yet, - since they're not fully initialized. */ - i16_raw_switch_to_pmode(); - - /* We can now hop in and out of 32-bit mode at will. */ - i16_do_32bit( - - /* Now that we can access all physical memory, - collect the memory regions we discovered while in 16-bit mode - and add them to our free memory list. - We can't do this before now because the free list nodes - are stored in the free memory itself, - which is probably out of reach of our 16-bit segments. */ - phys_mem_collect(); - - /* Initialize paging if necessary. - Do it before initializing the other processor tables - because they might have to be located - somewhere in high linear memory. */ - RAW_PAGING_INIT(); - - /* Initialize the processor tables. */ - cpu_init(&cpu[0]); - - /* Initialize the hardware interrupt vectors in the IDT. */ - irq_master_base = PICM_VECTBASE; - irq_slave_base = PICS_VECTBASE; - idt_irq_init(); - - inited = TRUE; - - /* Switch to real mode and back again once more, - to make sure everything's loaded properly. */ - do_16bit( - i16_raw_switch_to_real_mode(); - i16_raw_switch_to_pmode(); - ); - - raw_start(); - ); -} - -void (*i16_switch_to_real_mode)() = i16_raw_switch_to_real_mode; -void (*i16_switch_to_pmode)() = i16_raw_switch_to_pmode; - diff --git a/i386/pc/i16/i16_raw_test_a20.S b/i386/pc/i16/i16_raw_test_a20.S deleted file mode 100644 index a934e12..0000000 --- a/i386/pc/i16/i16_raw_test_a20.S +++ /dev/null @@ -1,35 +0,0 @@ - -#include <mach/machine/asm.h> - - .text - .code16 - -/* - * Test the A20 address line; return true if it is enabled. - */ -ENTRY(i16_raw_test_a20) - xorw %ax,%ax - movw %ax,%fs - notw %ax - movw %ax,%gs - - /* See if the values in already in the corresponding locations - are the same. */ - movw %fs:0,%ax - cmpw %gs:16,%ax - jnz 1f - - /* Yes; try changing one and see if they're still the same. */ - movw %ax,%dx - notw %ax - movw %ax,%fs:0 - cmpw %gs:16,%ax - movw %dx,%fs:0 - jnz 1f - - xorl %eax,%eax - ret -1: - movl $1,%eax - ret - diff --git a/i386/pc/i16/i16_real_int.S b/i386/pc/i16/i16_real_int.S deleted file mode 100644 index f05077e..0000000 --- a/i386/pc/i16/i16_real_int.S +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> - -#include "pc_asm.h" - - .text - .code16 - -ENTRY(i16_real_int) - pushf - pushl %ebx - pushl %esi - pushl %edi - pushl %ebp - - cli - - movl 6*4(%esp),%eax - movb %al,1f+1 - - movl 7*4(%esp),%ebp - movl RCD_EAX(%ebp),%eax - movl RCD_EBX(%ebp),%ebx - movl RCD_ECX(%ebp),%ecx - movl RCD_EDX(%ebp),%edx - movl RCD_ESI(%ebp),%esi - movl RCD_EDI(%ebp),%edi - movw RCD_DS(%ebp),%ds - movw RCD_ES(%ebp),%es - /* XXX flags */ - movl RCD_EBP(%ebp),%ebp - -1: int $0 - - pushl %ebp - movl 8*4(%esp),%ebp - popl RCD_EBP(%ebp) - - movl %eax,RCD_EAX(%ebp) - movl %ebx,RCD_EBX(%ebp) - movl %ecx,RCD_ECX(%ebp) - movl %edx,RCD_EDX(%ebp) - movl %esi,RCD_ESI(%ebp) - movl %edi,RCD_EDI(%ebp) - movw %ds,RCD_DS(%ebp) - movw %es,RCD_ES(%ebp) - - pushf - popl %eax - movw %ax,RCD_FLAGS(%ebp) - - movw %ss,%ax - movw %ax,%ds - movw %ax,%es - - popl %ebp - popl %edi - popl %esi - popl %ebx - popf - ret - diff --git a/i386/pc/i16/i16_switch.h b/i386/pc/i16/i16_switch.h deleted file mode 100644 index b7ecf18..0000000 --- a/i386/pc/i16/i16_switch.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I386_PC_SWITCH_H_ -#define _I386_PC_SWITCH_H_ - -/* Vectors to routines to switch between real and protected mode. */ -extern void (*i16_switch_to_real_mode)(); -extern void (*i16_switch_to_pmode)(); - -#endif _I386_PC_SWITCH_H_ diff --git a/i386/pc/i16/phys_mem_collect.c b/i386/pc/i16/phys_mem_collect.c deleted file mode 100644 index bcb0c09..0000000 --- a/i386/pc/i16/phys_mem_collect.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/vm_param.h> - -#include "phys_mem.h" - -void phys_mem_collect(void) -{ -#define pms(name) name##_collect(); -#include "phys_mem_sources.h" -#undef pms -} - diff --git a/i386/pc/i16/phys_mem_sources.h b/i386/pc/i16/phys_mem_sources.h deleted file mode 100644 index 788910d..0000000 --- a/i386/pc/i16/phys_mem_sources.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -pms(ext_mem) - diff --git a/i386/pc/i16/raw_exit.c b/i386/pc/i16/raw_exit.c deleted file mode 100644 index 5ccb69a..0000000 --- a/i386/pc/i16/raw_exit.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/seg.h> -#include <mach/machine/proc_reg.h> - -#include "i16.h" -#include "debug.h" - - -void raw_exit(int rc) -{ - do_16bit( - i16_raw_switch_to_real_mode(); - i16_exit(rc); - while (1); - ); -} - -void (*real_exit)(int rc) = raw_exit; - diff --git a/i386/pc/i16/raw_real_int.c b/i386/pc/i16/raw_real_int.c deleted file mode 100644 index a76d8ca..0000000 --- a/i386/pc/i16/raw_real_int.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/seg.h> -#include <mach/machine/proc_reg.h> - -#include "real.h" -#include "i16.h" -#include "debug.h" - - -void raw_real_int(int intnum, struct real_call_data *rcd) -{ - assert((get_cs() & 3) == 0); - - do_16bit( - unsigned int eflags; - - i16_raw_switch_to_real_mode(); - i16_real_int(intnum, rcd); - i16_raw_switch_to_pmode(); - ); -} - -void (*real_int)(int intnum, struct real_call_data *rcd) = raw_real_int; - diff --git a/i386/pc/ipl.h b/i386/pc/ipl.h deleted file mode 100644 index 5f40660..0000000 --- a/i386/pc/ipl.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* -Copyright (c) 1988,1989 Prime Computer, Inc. Natick, MA 01760 -All Rights Reserved. - -Permission to use, copy, modify, and distribute this -software and its documentation for any purpose and -without fee is hereby granted, provided that the above -copyright notice appears in all copies and that both the -copyright notice and this permission notice appear in -supporting documentation, and that the name of Prime -Computer, Inc. not be used in advertising or publicity -pertaining to distribution of the software without -specific, written prior permission. - -THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER, -INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS -SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN -NO EVENT SHALL PRIME COMPUTER, INC. BE LIABLE FOR ANY -SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY -DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR -PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR -OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION -WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - - -#define SPL0 0 -#define SPL1 1 -#define SPL2 2 -#define SPL3 3 -#define SPL4 4 -#define SPL5 5 -#define SPL6 6 - -#define SPLPP 5 -#define SPLTTY 6 -#define SPLNI 6 - -#define IPLHI 8 -#define SPL7 IPLHI -#define SPLHI IPLHI - -#ifndef ASSEMBLER -extern int (*ivect[])(); -extern int iunit[]; -extern unsigned char intpri[]; -#endif ASSEMBLER - diff --git a/i386/pc/irq.h b/i386/pc/irq.h deleted file mode 100644 index 1f9da9a..0000000 --- a/i386/pc/irq.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I386_PC_IRQ_H_ -#define _I386_PC_IRQ_H_ - -/* On normal PCs, there are always 16 IRQ lines. */ -#define IRQ_COUNT 16 - -/* Start of hardware interrupt vectors in the IDT. */ -#define IDT_IRQ_BASE 0x20 - -/* Variables storing the master and slave PIC interrupt vector base. */ -extern int irq_master_base, irq_slave_base; - -/* Routine called just after entering protected mode for the first time, - to set up the IRQ interrupt vectors in the protected-mode IDT. - It should initialize IDT entries irq_master_base through irq_master_base+7, - and irq_slave_base through irq_slave_base+7. */ -extern void idt_irq_init(void); - -/* Fill an IRQ gate in a CPU's IDT. - Always uses an interrupt gate; just set `access' to the privilege level. */ -#define fill_irq_gate(cpu, irq_num, entry, selector, access) \ - fill_idt_gate(cpu, (irq_num) < 8 \ - ? irq_master_base+(irq_num) \ - : irq_slave_base+(irq_num)-8, \ - entry, selector, ACC_INTR_GATE | (access)) - -#endif _I386_PC_IRQ_H_ diff --git a/i386/pc/irq_list.h b/i386/pc/irq_list.h deleted file mode 100644 index bfd216e..0000000 --- a/i386/pc/irq_list.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -/* This is just a handy file listing all the IRQ's on the PC, for whatever purpose... */ - -irq(master,0,0) -irq(master,1,1) -irq(master,2,2) -irq(master,3,3) -irq(master,4,4) -irq(master,5,5) -irq(master,6,6) -irq(master,7,7) - -irq(slave,0,8) -irq(slave,1,9) -irq(slave,2,10) -irq(slave,3,11) -irq(slave,4,12) -irq(slave,5,13) -irq(slave,6,14) -irq(slave,7,15) - diff --git a/i386/pc/pc_asm.sym b/i386/pc/pc_asm.sym deleted file mode 100644 index e05677e..0000000 --- a/i386/pc/pc_asm.sym +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include "real.h" -#include "real_tss.h" - -offset real_call_data rcd eax -offset real_call_data rcd ebx -offset real_call_data rcd ecx -offset real_call_data rcd edx -offset real_call_data rcd esi -offset real_call_data rcd edi -offset real_call_data rcd ebp -offset real_call_data rcd flags -offset real_call_data rcd ds -offset real_call_data rcd es -offset real_call_data rcd fs -offset real_call_data rcd gs -size real_call_data rcd - -expr REAL_TSS_SIZE - diff --git a/i386/pc/phys_mem.h b/i386/pc/phys_mem.h deleted file mode 100644 index 558267c..0000000 --- a/i386/pc/phys_mem.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -/* - * PC-specific flag bits and priority values - * for the List Memory Manager (LMM) - * relevant for kernels managing physical memory. - */ -#ifndef _I386_PC_PHYS_MEM_H_ -#define _I386_PC_PHYS_MEM_H_ - -#include_next "phys_mem.h" - -/* <1MB memory is most precious, then <16MB memory, then high memory. - Assign priorities to each region accordingly - so that high memory will be used first when possible, - then 16MB memory, then 1MB memory. */ -#define LMM_PRI_1MB -2 -#define LMM_PRI_16MB -1 -#define LMM_PRI_HIGH 0 - -/* For memory <1MB, both LMMF_1MB and LMMF_16MB will be set. - For memory from 1MB to 16MB, only LMMF_16MB will be set. - For all memory higher than that, neither will be set. */ -#define LMMF_1MB 0x01 -#define LMMF_16MB 0x02 - - -/* Call one of these routines to add a chunk of physical memory found - to the malloc_lmm free list. - It assigns the appropriate flags and priorities to the region, - as defined above, breaking up the region if necessary. */ -void phys_mem_add(vm_offset_t min, vm_size_t size); -void i16_phys_mem_add(vm_offset_t min, vm_size_t size); - -#endif _I386_PC_PHYS_MEM_H_ diff --git a/i386/pc/phys_mem_add.c b/i386/pc/phys_mem_add.c deleted file mode 100644 index 79fd3ce..0000000 --- a/i386/pc/phys_mem_add.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/vm_types.h> -#include <mach/lmm.h> -#include <malloc.h> - -#include "vm_param.h" -#include "phys_mem.h" - -/* Note that this routine takes _physical_ addresses, not virtual. */ -void phys_mem_add(vm_offset_t min, vm_size_t size) -{ - vm_offset_t max = min + size; - - /* Add the memory region with the proper flags and priority. */ - if (max <= 1*1024*1024) - { - lmm_add(&malloc_lmm, phystokv(min), size, - LMMF_1MB | LMMF_16MB, LMM_PRI_1MB); - } - else - { - if (min < 16*1024*1024) - { - vm_offset_t nmax = max; - if (nmax > 16*1024*1024) nmax = 16*1024*1024; - lmm_add(&malloc_lmm, phystokv(min), nmax - min, - LMMF_16MB, LMM_PRI_16MB); - } - if (max > 16*1024*1024) - { - vm_offset_t nmin = min; - if (nmin < 16*1024*1024) nmin = 16*1024*1024; - lmm_add(&malloc_lmm, phystokv(nmin), max - nmin, 0, 0); - } - } - - if (max > phys_mem_max) - phys_mem_max = max; -} - diff --git a/i386/pc/pic.c b/i386/pc/pic.c deleted file mode 100644 index eaf7b56..0000000 --- a/i386/pc/pic.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* -Copyright (c) 1988,1989 Prime Computer, Inc. Natick, MA 01760 -All Rights Reserved. - -Permission to use, copy, modify, and distribute this -software and its documentation for any purpose and -without fee is hereby granted, provided that the above -copyright notice appears in all copies and that both the -copyright notice and this permission notice appear in -supporting documentation, and that the name of Prime -Computer, Inc. not be used in advertising or publicity -pertaining to distribution of the software without -specific, written prior permission. - -THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER, -INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS -SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN -NO EVENT SHALL PRIME COMPUTER, INC. BE LIABLE FOR ANY -SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY -DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR -PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR -OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION -WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - -#include <mach/machine/pio.h> - -#include <sys/types.h> - -#include "ipl.h" -#include "pic.h" - - -u_short pic_mask[SPLHI+1]; - -int curr_ipl; -u_short curr_pic_mask; - -u_short orig_pic_mask; -int orig_pic_mask_initialized; - -u_char intpri[NINTR]; - -/* -** picinit() - This routine -** * Establishes a table of interrupt vectors -** * Establishes a table of interrupt priority levels -** * Establishes a table of interrupt masks to be put -** in the PICs. -** * Establishes location of PICs in the system -** * Initialises them -** -** At this stage the interrupt functionality of this system should be -** coplete. -** -*/ - - -/* -** 1. First we form a table of PIC masks - rather then calling form_pic_mask() -** each time there is a change of interrupt level - we will form a table -** of pic masks, as there are only 7 interrupt priority levels. -** -** 2. The next thing we must do is to determine which of the PIC interrupt -** request lines have to be masked out, this is done by calling -** form_pic_mask() with a (int_lev) of zero, this will find all the -** interrupt lines that have priority 0, (ie to be ignored). -** Then we split this up for the master/slave PICs. -** -** 2. Initialise the PICs , master first, then the slave. -** All the register field definitions are described in pic_jh.h, also -** the settings of these fields for the various registers are selected. -** -*/ - -pic_init(int master_base, int slave_base) -{ - u_short PICM_OCW1, PICS_OCW1 ; - u_short PICM_OCW2, PICS_OCW2 ; - u_short PICM_OCW3, PICS_OCW3 ; - u_short i; - - if (!orig_pic_mask_initialized) - { - unsigned omaster, oslave; - - omaster = inb(MASTER_OCW); - PIC_DELAY(); - oslave = inb(SLAVES_OCW); - PIC_DELAY(); - - orig_pic_mask = omaster | (oslave << 8); - orig_pic_mask_initialized = 1; - } - - - /* - ** 1. Form pic mask table - */ - - form_pic_mask(); - - /* - ** 1a. Select current SPL. - */ - - curr_ipl = SPLHI; - curr_pic_mask = pic_mask[SPLHI]; - - /* - ** 3. Select options for each ICW and each OCW for each PIC. - */ - -#if 0 - PICM_ICW1 = (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 - | CASCADE_MODE | ICW4__NEEDED); - - PICS_ICW1 = (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 - | CASCADE_MODE | ICW4__NEEDED); - - PICM_ICW2 = master_base; - PICS_ICW2 = slave_base; - - PICM_ICW3 = ( SLAVE_ON_IR2 ); - PICS_ICW3 = ( I_AM_SLAVE_2 ); - - PICM_ICW4 = (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD - | I8086_EMM_MOD); - PICS_ICW4 = (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD - | I8086_EMM_MOD); -#endif - - PICM_OCW1 = (curr_pic_mask & 0x00FF); - PICS_OCW1 = ((curr_pic_mask & 0xFF00)>>8); - - PICM_OCW2 = NON_SPEC_EOI; - PICS_OCW2 = NON_SPEC_EOI; - - PICM_OCW3 = (OCW_TEMPLATE | READ_NEXT_RD | READ_IR_ONRD ); - PICS_OCW3 = (OCW_TEMPLATE | READ_NEXT_RD | READ_IR_ONRD ); - - - /* - ** 4. Initialise master - send commands to master PIC - */ - - outb ( MASTER_ICW, PICM_ICW1 ); - PIC_DELAY(); - outb ( MASTER_OCW, master_base ); - PIC_DELAY(); - outb ( MASTER_OCW, PICM_ICW3 ); - PIC_DELAY(); - outb ( MASTER_OCW, PICM_ICW4 ); - PIC_DELAY(); - -#if 0 - outb ( MASTER_OCW, PICM_MASK ); - PIC_DELAY(); - outb ( MASTER_ICW, PICM_OCW3 ); - PIC_DELAY(); -#endif - - /* - ** 5. Initialise slave - send commands to slave PIC - */ - - outb ( SLAVES_ICW, PICS_ICW1 ); - PIC_DELAY(); - outb ( SLAVES_OCW, slave_base ); - PIC_DELAY(); - outb ( SLAVES_OCW, PICS_ICW3 ); - PIC_DELAY(); - outb ( SLAVES_OCW, PICS_ICW4 ); - PIC_DELAY(); - -#if 0 - outb ( SLAVES_OCW, PICS_OCW1 ); - PIC_DELAY(); - outb ( SLAVES_ICW, PICS_OCW3 ); - PIC_DELAY(); - - /* - ** 6. Initialise interrupts - */ - outb ( MASTER_OCW, PICM_OCW1 ); - PIC_DELAY(); -#endif - - outb(MASTER_OCW, orig_pic_mask); - PIC_DELAY(); - outb(SLAVES_OCW, orig_pic_mask >> 8); - PIC_DELAY(); - -#if 0 - /* XXX */ - if (master_base != 8) - { - outb(0x21, 0xff); - PIC_DELAY(); - outb(0xa1, 0xff); - PIC_DELAY(); - } -#endif - - outb(MASTER_ICW, NON_SPEC_EOI); - PIC_DELAY(); - outb(SLAVES_ICW, NON_SPEC_EOI); - PIC_DELAY(); - - inb(0x60); - -} - -/* -** form_pic_mask(int_lvl) -** -** For a given interrupt priority level (int_lvl), this routine goes out -** and scans through the interrupt level table, and forms a mask based on the -** entries it finds there that have the same or lower interrupt priority level -** as (int_lvl). It returns a 16-bit mask which will have to be split up between -** the 2 pics. -** -*/ - -#define SLAVEMASK (0xFFFF ^ SLAVE_ON_IR2) -#define SLAVEACTV 0xFF00 - -form_pic_mask() -{ - unsigned short i, j, bit, mask; - - for (i=SPL0; i <= SPLHI; i++) { - for (j=0x00, bit=0x01, mask = 0; j < NINTR; j++, bit<<=1) - if (intpri[j] <= i) - mask |= bit; - - if ((mask & SLAVEACTV) != SLAVEACTV ) - mask &= SLAVEMASK; - - pic_mask[i] = mask; - } -} - -#if 0 - -intnull(unit_dev) -{ - printf("intnull(%d)\n", unit_dev); -} - -int prtnull_count = 0; -prtnull(unit) -{ - ++prtnull_count; -} - -#endif 0 diff --git a/i386/pc/pic.h b/i386/pc/pic.h deleted file mode 100644 index 51911cc..0000000 --- a/i386/pc/pic.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* -Copyright (c) 1988,1989 Prime Computer, Inc. Natick, MA 01760 -All Rights Reserved. - -Permission to use, copy, modify, and distribute this -software and its documentation for any purpose and -without fee is hereby granted, provided that the above -copyright notice appears in all copies and that both the -copyright notice and this permission notice appear in -supporting documentation, and that the name of Prime -Computer, Inc. not be used in advertising or publicity -pertaining to distribution of the software without -specific, written prior permission. - -THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER, -INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS -SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN -NO EVENT SHALL PRIME COMPUTER, INC. BE LIABLE FOR ANY -SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY -DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR -PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR -OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION -WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - -#ifndef _I386_PIC_H_ -#define _I386_PIC_H_ - -#include "irq.h" - -#define NINTR 0x10 -#define NPICS 0x02 - -/* -** The following are definitions used to locate the PICs in the system -*/ - -#define ADDR_PIC_BASE 0x20 -#define OFF_ICW 0x00 -#define OFF_OCW 0x01 -#define SIZE_PIC 0x80 - -#define MASTER_ICW (ADDR_PIC_BASE + OFF_ICW) -#define MASTER_OCW (ADDR_PIC_BASE + OFF_OCW) -#define SLAVES_ICW (ADDR_PIC_BASE + OFF_ICW + SIZE_PIC) -#define SLAVES_OCW (ADDR_PIC_BASE + OFF_OCW + SIZE_PIC) - -/* -** The following banks of definitions ICW1, ICW2, ICW3, and ICW4 are used -** to define the fields of the various ICWs for initialisation of the PICs -*/ - -/* -** ICW1 -*/ - -#define ICW_TEMPLATE 0x10 - -#define LEVL_TRIGGER 0x08 -#define EDGE_TRIGGER 0x00 -#define ADDR_INTRVL4 0x04 -#define ADDR_INTRVL8 0x00 -#define SINGLE__MODE 0x02 -#define CASCADE_MODE 0x00 -#define ICW4__NEEDED 0x01 -#define NO_ICW4_NEED 0x00 - -/* -** ICW2 -*/ - -#define PICM_VECTBASE IDT_IRQ_BASE -#define PICS_VECTBASE (PICM_VECTBASE + 0x08) - -/* -** ICW3 -*/ - -#define SLAVE_ON_IR0 0x01 -#define SLAVE_ON_IR1 0x02 -#define SLAVE_ON_IR2 0x04 -#define SLAVE_ON_IR3 0x08 -#define SLAVE_ON_IR4 0x10 -#define SLAVE_ON_IR5 0x20 -#define SLAVE_ON_IR6 0x40 -#define SLAVE_ON_IR7 0x80 - -#define I_AM_SLAVE_0 0x00 -#define I_AM_SLAVE_1 0x01 -#define I_AM_SLAVE_2 0x02 -#define I_AM_SLAVE_3 0x03 -#define I_AM_SLAVE_4 0x04 -#define I_AM_SLAVE_5 0x05 -#define I_AM_SLAVE_6 0x06 -#define I_AM_SLAVE_7 0x07 - -/* -** ICW4 -*/ - -#define SNF_MODE_ENA 0x10 -#define SNF_MODE_DIS 0x00 -#define BUFFERD_MODE 0x08 -#define NONBUFD_MODE 0x00 -#define AUTO_EOI_MOD 0x02 -#define NRML_EOI_MOD 0x00 -#define I8086_EMM_MOD 0x01 -#define SET_MCS_MODE 0x00 - -/* -** OCW1 -*/ - -#define PICM_MASK 0xFF -#define PICS_MASK 0xFF - -/* -** OCW2 -*/ - -#define NON_SPEC_EOI 0x20 -#define SPECIFIC_EOI 0x30 -#define ROT_NON_SPEC 0x50 -#define SET_ROT_AEOI 0x40 -#define RSET_ROTAEOI 0x00 -#define ROT_SPEC_EOI 0x70 -#define SET_PRIORITY 0x60 -#define NO_OPERATION 0x20 - -#define SEND_EOI_IR0 0x00 -#define SEND_EOI_IR1 0x01 -#define SEND_EOI_IR2 0x02 -#define SEND_EOI_IR3 0x03 -#define SEND_EOI_IR4 0x04 -#define SEND_EOI_IR5 0x05 -#define SEND_EOI_IR6 0x06 -#define SEND_EOI_IR7 0x07 - -/* -** OCW3 -*/ - -#define OCW_TEMPLATE 0x08 -#define SPECIAL_MASK 0x40 -#define MASK_MDE_SET 0x20 -#define MASK_MDE_RST 0x00 -#define POLL_COMMAND 0x04 -#define NO_POLL_CMND 0x00 -#define READ_NEXT_RD 0x02 -#define READ_IR_ONRD 0x00 -#define READ_IS_ONRD 0x01 - - -/* -** Standard PIC initialization values for PCs. -*/ -#define PICM_ICW1 (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 \ - | CASCADE_MODE | ICW4__NEEDED) -#define PICM_ICW3 (SLAVE_ON_IR2) -#define PICM_ICW4 (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD \ - | I8086_EMM_MOD) - -#define PICS_ICW1 (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 \ - | CASCADE_MODE | ICW4__NEEDED) -#define PICS_ICW3 (I_AM_SLAVE_2) -#define PICS_ICW4 (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD \ - | I8086_EMM_MOD) - -/* Some systems need a little bit of delay - while fiddling with PIC registers. */ -#ifndef ASSEMBLER -#define PIC_DELAY() asm volatile("jmp 1f; 1: jmp 1f; 1:") -#else -#define PIC_DELAY jmp 9f; 9: jmp 9f; 9: -#endif - - -#endif _I386_PIC_H_ diff --git a/i386/pc/putchar.c b/i386/pc/putchar.c deleted file mode 100644 index d5b106c..0000000 --- a/i386/pc/putchar.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/eflags.h> - -#include "real.h" - -#ifndef ENABLE_IMMCONSOLE - -#include <rc.h> -int putchar(int c) -{ - - if (c == '\n') - putchar('\r'); - - { -#if RCLINE >= 0 - static int serial_inited = 0; - if (! serial_inited) { - init_serial(); - serial_inited = 1; - } - serial_putc(c); -#else - struct real_call_data rcd; - rcd.eax = 0x0e00 | (c & 0xff); - rcd.ebx = 0x07; - rcd.flags = 0; - real_int(0x10, &rcd); -#endif - } - - return 0; -} - -#else ENABLE_IMMCONSOLE - -void -putchar(unsigned char c) -{ - static int ofs = -1; - - if (ofs < 0) - { - ofs = 0; - putchar('\n'); - } - if (c == '\r') - { - ofs = 0; - } - else if (c == '\n') - { - bcopy(0xb8000+80*2, 0xb8000, 80*2*24); - bzero(0xb8000+80*2*24, 80*2); - ofs = 0; - } - else - { - volatile unsigned char *p; - - if (ofs >= 80) - { - putchar('\r'); - putchar('\n'); - } - - p = (void*)0xb8000 + 80*2*24 + ofs*2; - p[0] = c; - p[1] = 0x0f; - ofs++; - } -} - -#endif ENABLE_IMMCONSOLE diff --git a/i386/pc/real.h b/i386/pc/real.h deleted file mode 100644 index 4206231..0000000 --- a/i386/pc/real.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I386_PC_REAL_CALL_H_ -#define _I386_PC_REAL_CALL_H_ - -/* This structure happens to correspond to the DPMI real-call structure. */ -struct real_call_data -{ - unsigned edi; - unsigned esi; - unsigned ebp; - unsigned reserved; - unsigned ebx; - unsigned edx; - unsigned ecx; - unsigned eax; - unsigned short flags; - unsigned short es; - unsigned short ds; - unsigned short fs; - unsigned short gs; - unsigned short ip; - unsigned short cs; - unsigned short sp; - unsigned short ss; -}; - -/* Code segment we originally had when we started in real mode. */ -extern unsigned short real_cs; - -extern void (*real_int)(int intnum, struct real_call_data *rcd); -extern void (*real_exit)(int rc); - -#define real_call_data_init(rcd) \ - ({ (rcd)->flags = 0; \ - (rcd)->ss = 0; \ - (rcd)->sp = 0; \ - }) - -#endif /* _I386_PC_REAL_CALL_H_ */ diff --git a/i386/pc/real_tss.c b/i386/pc/real_tss.c deleted file mode 100644 index 745a611..0000000 --- a/i386/pc/real_tss.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/tss.h> -#include <mach/machine/proc_reg.h> - -#include "cpu.h" -#include "real_tss.h" -#include "vm_param.h" -#include "config.h" - -#ifdef ENABLE_REAL_TSS - -static void real_tss_init() -{ - /* Only initialize once. */ - if (!real_tss.ss0) - { - /* Initialize the real-mode TSS. */ - real_tss.ss0 = KERNEL_DS; - real_tss.esp0 = get_esp(); - real_tss.io_bit_map_offset = sizeof(real_tss); - - /* Set the last byte in the I/O bitmap to all 1's. */ - ((unsigned char*)&real_tss)[REAL_TSS_SIZE] = 0xff; - } -} - -void -cpu_gdt_init_REAL_TSS(struct cpu *cpu) -{ - real_tss_init(); - - fill_gdt_descriptor(cpu, REAL_TSS, - kvtolin(&real_tss), REAL_TSS_SIZE-1, - ACC_PL_K|ACC_TSS, 0); -} - -#endif ENABLE_REAL_TSS diff --git a/i386/pc/real_tss.h b/i386/pc/real_tss.h deleted file mode 100644 index 2f89547..0000000 --- a/i386/pc/real_tss.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ -#ifndef _I386_PC_REAL_TSS_ -#define _I386_PC_REAL_TSS_ - -#include <mach/machine/tss.h> - -extern struct i386_tss real_tss; - -/* This size doesn't include the extra required 0xff byte - just past the end of the real IOPB. */ -#define REAL_TSS_SIZE (sizeof(real_tss)+65536/8) - -#endif _I386_PC_REAL_TSS_ diff --git a/i386/pc/real_tss_def.S b/i386/pc/real_tss_def.S deleted file mode 100644 index 1871250..0000000 --- a/i386/pc/real_tss_def.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> - -#include "config.h" -#include "pc_asm.h" - -#ifdef ENABLE_REAL_TSS - - .data - .globl EXT(real_tss) - .comm EXT(real_tss),REAL_TSS_SIZE+1 - -#endif ENABLE_REAL_TSS diff --git a/i386/pc/rv86/config.h b/i386/pc/rv86/config.h deleted file mode 100644 index 5f971ce..0000000 --- a/i386/pc/rv86/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include_next "config.h" - -#ifndef ENABLE_REAL_TSS -#define ENABLE_REAL_TSS -#endif - diff --git a/i386/pc/rv86/gdt_sels.h b/i386/pc/rv86/gdt_sels.h deleted file mode 100644 index 89a13c7..0000000 --- a/i386/pc/rv86/gdt_sels.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include_next "gdt_sels.h" - -/* This is a special TSS with a full IO bitmap - that allows access to all I/O ports in v86 mode. - It's used for making calls to the real-mode BIOS (or DOS). */ -gdt_sel(RV86_TSS) - -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include_next "gdt_sels.h" - -/* This is a special TSS with a full IO bitmap - that allows access to all I/O ports in v86 mode. - It's used for making calls to the real-mode BIOS (or DOS). */ -gdt_sel(RV86_TSS) - diff --git a/i386/pc/rv86/idt_irq_init.c b/i386/pc/rv86/idt_irq_init.c deleted file mode 100644 index f46882a..0000000 --- a/i386/pc/rv86/idt_irq_init.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include "cpu.h" -#include "idt.h" - -void idt_irq_init() -{ - int i; - -#define irq(pic,picnum,irqnum) \ - { extern void rv86_reflect_irq##irqnum(); \ - fill_idt_gate(&cpu[0], irq_##pic##_base + picnum, \ - (vm_offset_t)rv86_reflect_irq##irqnum, KERNEL_CS, \ - ACC_PL_K|ACC_INTR_GATE); \ - } -#include "irq_list.h" -#undef irq -} - diff --git a/i386/pc/rv86/rv86_real_int.c b/i386/pc/rv86/rv86_real_int.c deleted file mode 100644 index d9c35b6..0000000 --- a/i386/pc/rv86/rv86_real_int.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/seg.h> -#include <mach/machine/proc_reg.h> -#include <mach/machine/far_ptr.h> -#include <mach/machine/eflags.h> - -#include "vm_param.h" -#include "real.h" -#include "real_tss.h" -#include "cpu.h" -#include "debug.h" - - -/* - - There seem to be three main ways to handle v86 mode: - - * The v86 environment is just an extension of the normal kernel environment: - you can switch to and from v86 mode just as you can change any other processor state. - You always keep running on the separate "logical" stack, - which is the kernel stack when running in protected mode, - or the user stack when running in v86 mode. - When in v86 mode, the "actual" kernel stack is just a stub - big enough to switch back to the "normal" kernel stack, - which was being used as the user stack while running in v86 mode. - Thus, v86 and protected-mode "segments" of stack data - can be interleaved together on the same logical stack. - - - To make a real int call from kernel pmode, - switch to v86 mode and execute an int instruction, - then switch back to protected mode. - - - To reflect an interrupt to v86 mode: - - > If the processor was running in v86 mode, - just adjust the kernel and user stacks - to emulate a real-mode interrupt, and return. - - > If the processor was running in pmode, - switch to v86 mode and re-trigger the interrupt - with a software int instruction. - - - To handle an interrupt in pmode: - - > If the processor was running in v86 mode, - switch from the stub stack to the user stack that was in use - (could be different from the stack we set originally, - because BIOS/DOS code might have switched stacks!), - call the interrupt handler, switch back, and return. - - > If the processor was running in pmode, - just call the interrupt handler and return. - - This method only works if the whole "kernel" is <64KB - and generally compatible with real-mode execution. - This is the model my DOS extender currently uses. - - One major disadvantage of this method - is that interrupt handlers can't run "general" protected-mode code, - such as typical code compiled by GCC. - This is because, if an interrupt occurs while in v86 mode, - the v86-mode ss:sp may point basically anywhere in the low 1MB, - and it therefore it can't be used directly as a pmode stack; - and the only other stack available is the miniscule stub stack. - Since "general" protected-mode code expects a full-size stack - with an SS equal to the normal protected-mode DS, - neither of these available stacks will suffice. - It is impossible to switch back to the original kernel stack - because arbitrary DOS or BIOS code might have switched from it - to a different stack somewhere else in the low 1MB, - and we have no way of telling where the SP was when that happened. - The upshot is that interrupt handlers must be extremely simple; - in MOSS, all they do is post a signal to "the process," - and return immediately without actually handling the interrupt. - - * The v86 environment is a separate "task" with its own user and kernel stacks; - you switch back and forth as if between multiple ordinary tasks, - the tasks can preempt each other, go idle waiting for events, etc. - - - To make a real int call from kernel pmode, - the task making the call essentially does a synchronous IPC to the v86 task. - If the v86 task is busy with another request or a reflected interrupt, - the calling task will go idle until the v86 task is available. - - - Reflecting an interrupt to v86 mode - basically amounts to sending a Unix-like "signal" to the v86 task: - - > If the processor was running in the v86 task, - just adjust the kernel and user stacks - to emulate a real-mode interrupt, and return. - - > If the processor was running in a protected-mode task - (or another v86-mode task), - post a signal to the v86 task, wake it up if it's asleep, - and invoke the scheduler to switch to the v86 task - if it has a higher priority than the currently running task. - - - To handle an interrupt in pmode, - just call the interrupt handler and return. - It doesn't matter whether the interrupt was from v86 or pmode, - because the kernel stacks look the same in either case. - - One big problem with this method is that if interrupts are to be handled in v86 mode, - all the typical problems of handling interrupts in user-mode tasks pop up. - In particular, an interrupt can now cause preemption, - so this will break an interruptible but nonpreemptible environment. - (The problem is not that the interrupted task is "preempted" - to switch temporarily to the v86 task to handle the interrupt; - the problem is that when the v86 task is done handling the interrupt, - the scheduler will be invoked and some task other than the interrupted task may be run.) - - Of course, this is undoubtedly the right solution - if that's the interrupt model the OS is using anyway - (i.e. if the OS already supports user-level protected-mode interrupts). - - * A bastardization of the two above approaches: - treat the v86 environment as a separate "task", - but a special one that doesn't behave at all like other tasks. - The v86 "task" in this case is more of an "interrupt co-stack" - that grows and shrinks alongside the normal interrupt stack - (or the current kernel stack, if interrupts are handled on the kernel stack). - Interrupts and real calls can cause switches between these two interrupt stacks, - but they can't cause preemption in the normal sense. - The route taken while building the stacks is exactly the opposite - the route taken while tearing it down. - - Now two "kernel stack pointers" have to be maintained all the time instead of one. - When running in protected mode: - - - The ESP register contains the pmode stack pointer. - - Some global variable contains the v86 stack pointer. - - When running in v86 mode: - - - The ESP register contains the v86 stack pointer. - (Note that BIOS/DOS code can switch stacks, - so at any given time it may point practically anywhere!) - - The current tss's esp0 contains the pmode stack pointer. - - Whenever a switch is made, a stack frame is placed on the new co-stack - indicating that the switch was performed. - - - To make a real int call from kernel pmode, - build a real-mode interrupt stack frame on the v86 interrupt stack, - build a v86-mode trap stack frame on the pmode stack, - set the tss's esp0 to point to the end of that stack frame, - and iret from it. - Then when the magic "done-with-real-call" int instruction is hit, - the pmode interrupt handler will see it - and know to simply destroy the v86 trap stack on the pmode stack. - - - Handling an interrupt can always be thought of as going "through" pmode: - switching from the v86 stack to the pmode stack - if the processor was in v86 mode when the interrupt was taken, - and switching from the pmode stack back to the v86 stack as described above - if the interrupt is to be reflected to v86 mode. - - Of course, optimized paths are possible: - - - To reflect an interrupt to v86 mode: - - > If the processor was running in v86 mode, - just adjust the kernel and user stack frames and return. - - > If the processor was running in pmode, - do as described above for explicit real int calls. - - - To handle an interrupt in pmode: - - > If the processor was running in v86 mode, - switch to the pmode stack, - stash the old v86 stack pointer variable on the pmode stack, - and set the v86 stack pointer variable to the new location. - Call the interrupt handler, - then tear down everything and return to v86 mode. - - Observation: - In the first and third models, - explicit real int calls are entirely symmetrical - to hardware interrupts from pmode to v86 mode. - This is valid because of the interruptible but nonpreemptible model: - no scheduling is involved, and the stack(s) will always be torn down - in exactly the opposite order in which they were built up. - In the second model, - explicit real calls are quite different, - because the BIOS is interruptible but nonpreemptible: - you can reflect an interrupt into the v86 task at any time, - but you can only make an explicit request to that task when it's ready - (i.e. no other requests or interrupts are outstanding). - -*/ - - - -#define RV86_USTACK_SIZE 1024 - -vm_offset_t rv86_ustack_pa; -vm_offset_t rv86_return_int_pa; -struct far_pointer_32 rv86_usp; -struct far_pointer_16 rv86_rp; - -void rv86_real_int(int intnum, struct real_call_data *rcd) -{ - unsigned short old_tr; - unsigned int old_eflags; - - /* If this is the first time this routine is being called, - initialize the kernel stack. */ - if (!rv86_ustack_pa) - { - rv86_ustack_pa = 0xa0000 - RV86_USTACK_SIZE; /* XXX */ - - assert(rv86_ustack_pa < 0x100000); - - /* Use the top two bytes of the ustack for an 'int $0xff' instruction. */ - rv86_return_int_pa = rv86_ustack_pa + RV86_USTACK_SIZE - 2; - *(short*)phystokv(rv86_return_int_pa) = 0xffcd; - - /* Set up the v86 stack pointer. */ - rv86_usp.seg = rv86_rp.seg = rv86_ustack_pa >> 4; - rv86_usp.ofs = rv86_rp.ofs = (rv86_ustack_pa & 0xf) + RV86_USTACK_SIZE - 2; - - /* Pre-allocate a real-mode interrupt stack frame. */ - rv86_usp.ofs -= 6; - } - - /* Make sure interrupts are disabled. */ - old_eflags = get_eflags(); - - /* Switch to the TSS to use in v86 mode. */ - old_tr = get_tr(); - cpu[0].tables.gdt[REAL_TSS_IDX].access &= ~ACC_TSS_BUSY; - set_tr(REAL_TSS); - - asm volatile(" - pushl %%ebp - pushl %%eax - call rv86_real_int_asm - popl %%eax - popl %%ebp - " : - : "a" (rcd), "S" (intnum) - : "eax", "ebx", "ecx", "edx", "esi", "edi"); - - /* Switch to the original TSS. */ - cpu[0].tables.gdt[old_tr/8].access &= ~ACC_TSS_BUSY; - set_tr(old_tr); - - /* Restore the original processor flags. */ - set_eflags(old_eflags); -} - -void (*real_int)(int intnum, struct real_call_data *rcd) = rv86_real_int; - diff --git a/i386/pc/rv86/rv86_real_int_asm.S b/i386/pc/rv86/rv86_real_int_asm.S deleted file mode 100644 index 54b1b9b..0000000 --- a/i386/pc/rv86/rv86_real_int_asm.S +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> -#include <mach/machine/eflags.h> - -#include "trap.h" -#include "i386_asm.h" -#include "pc_asm.h" -#include "trap_asm.h" - - .text - .globl rv86_real_int_asm -rv86_real_int_asm: - - /* Stash our protected-mode stack pointer. */ - movl %esp,EXT(real_tss)+TSS_ESP0 - - /* Load the linear/physical-address data segment into ES, - for easy access to real-mode memory. */ - movl $LINEAR_DS,%edx - movw %dx,%es - - /* Find the physical address of the real-mode interrupt stack (es:ebx). - A 6-byte stack frame has already been allocated on it. */ - movl EXT(rv86_usp)+4,%ebx - shll $4,%ebx - addl EXT(rv86_usp),%ebx - - /* Store the magic return pointer into the real-mode interrupt stack frame. */ - movl EXT(rv86_rp),%edx - movl %edx,%es:(%ebx) - movw RCD_FLAGS(%eax),%dx - movw %dx,%es:4(%ebx) - - /* Find the address of the real mode interrupt vector (es:esi). */ - shll $2,%esi - - /* Build the v86 trap frame. */ - xorl %edx,%edx - movw RCD_GS(%eax),%dx - pushl %edx - movw RCD_FS(%eax),%dx - pushl %edx - movw RCD_DS(%eax),%dx - pushl %edx - movw RCD_ES(%eax),%dx - pushl %edx - pushl EXT(rv86_usp)+4 - pushl EXT(rv86_usp) - movl $EFL_VM+EFL_IOPL_USER,%ecx - orw RCD_FLAGS(%eax),%cx - andl $-1-EFL_IF-EFL_TF,%ecx - pushl %ecx - movw %es:2(%esi),%edx - pushl %edx - movw %es:(%esi),%edx - pushl %edx - - /* Load the requested register state. */ - movl RCD_EDI(%eax),%edi - movl RCD_ESI(%eax),%esi - movl RCD_EBP(%eax),%ebp - movl RCD_EBX(%eax),%ebx - movl RCD_EDX(%eax),%edx - movl RCD_ECX(%eax),%ecx - movl RCD_EAX(%eax),%eax - - /* Drop into v86 mode. */ - iret - -ENTRY(rv86_return) - - /* Restore the kernel segment registers. */ - movw %ss,%ax - movw %ax,%ds - movw %ax,%es - - /* Retrieve the real_call_data pointer from rv86_real_int_asm's stack frame. */ - movl TR_V86SIZE+4(%esp),%eax - - /* Stash the final register state. */ - movl TR_EDI(%esp),%edx; movl %edx,RCD_EDI(%eax) - movl TR_ESI(%esp),%edx; movl %edx,RCD_ESI(%eax) - movl TR_EBP(%esp),%edx; movl %edx,RCD_EBP(%eax) - movl TR_EBX(%esp),%edx; movl %edx,RCD_EBX(%eax) - movl TR_EDX(%esp),%edx; movl %edx,RCD_EDX(%eax) - movl TR_ECX(%esp),%edx; movl %edx,RCD_ECX(%eax) - movl TR_EAX(%esp),%edx; movl %edx,RCD_EAX(%eax) - movl TR_EFLAGS(%esp),%edx; movw %dx,RCD_FLAGS(%eax) - movl TR_V86_ES(%esp),%edx; movw %dx,RCD_ES(%eax) - movl TR_V86_DS(%esp),%edx; movw %dx,RCD_DS(%eax) - movl TR_V86_FS(%esp),%edx; movw %dx,RCD_FS(%eax) - movl TR_V86_GS(%esp),%edx; movw %dx,RCD_GS(%eax) - - /* Return from the call to rv86_real_int_asm. */ - lea TR_V86SIZE(%esp),%esp - ret - diff --git a/i386/pc/rv86/rv86_reflect_irq.S b/i386/pc/rv86/rv86_reflect_irq.S deleted file mode 100644 index 5d68fae..0000000 --- a/i386/pc/rv86/rv86_reflect_irq.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright (c) 1995 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> -#include <mach/machine/eflags.h> - -#include "trap.h" -#include "trap_asm.h" -#include "pc_asm.h" -#include "i386_asm.h" - -/* - * Define a set of interrupt handlers to reflect interrupts to v86 mode. - */ - - .text - -#define master_base 0x08 -#define slave_base 0x70 - -#define irq(pic,picnum,irqnum) \ -ENTRY(rv86_reflect_irq##irqnum) ;\ - pushl $pic##_base+picnum ;\ - pushl $0x80000000+irqnum /* (for debug) */ ;\ - jmp allintrs - -#include "irq_list.h" - - -allintrs: - pusha - pushl %ds - pushl %es - pushl %fs - pushl %gs - - /* Load the normal kernel segment registers. */ - movw %ss,%ax - movw %ax,%ds - movw %ax,%es - - /* See if we came from v86 mode. */ - testl $EFL_VM,TR_EFLAGS(%esp) - jnz int_from_v86 - - movl TR_ERR(%esp),%eax - pushl $dummy_rcd - pushl %eax - call EXT(rv86_real_int) - addl $2*4,%esp - - popl %gs - popl %fs - popl %es - popl %ds - popa - addl $2*4,%esp - iret - -int_from_v86: - - /* Save the v86 stack pointer before handling the interrupt. - We need this in order to handle recursive reflected interrupts - possibly interspersed with protected-mode interrupts. */ - movl EXT(rv86_usp),%esi - movl EXT(rv86_usp)+4,%edi - movl EXT(real_tss)+TSS_ESP0,%ebx - - movl TR_ESP(%esp),%eax - subw $6,%ax /* allocate a real-mode interrupt stack frame. */ - movl %eax,EXT(rv86_usp) - movl TR_SS(%esp),%eax - movw %ax,EXT(rv86_usp)+4 - - movl TR_ERR(%esp),%eax - pushl $dummy_rcd - pushl %eax - call EXT(rv86_real_int) - addl $2*4,%esp - - movl %esi,EXT(rv86_usp) - movl %edi,EXT(rv86_usp)+4 - movl %ebx,EXT(real_tss)+TSS_ESP0 - - addl $4*4,%esp - popa - addl $2*4,%esp - iret - - /* Dummy real_call_data structure (always all zero) - to use when reflecting hardware interrupts. */ - .comm dummy_rcd,RCD_SIZE - diff --git a/i386/pc/rv86/rv86_trap_handler.S b/i386/pc/rv86/rv86_trap_handler.S deleted file mode 100644 index 793f6b6..0000000 --- a/i386/pc/rv86/rv86_trap_handler.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> -#include <mach/machine/eflags.h> - -#include "i386_asm.h" -#include "trap.h" -#include "trap_asm.h" - - .text - -ENTRY(rv86_trap_handler) - cmpl $T_GENERAL_PROTECTION,TR_TRAPNO(%esp) - jz gpf_from_v86 - - UNEXPECTED_TRAP - -gpf_from_v86: - - /* Load the linear/physical-address data segment, - for easy access to real-mode memory. */ - movl $LINEAR_DS,%eax - movw %ax,%ds - - /* Find the physical address of the trapping instruction (ebx). */ - movzwl TR_CS(%esp),%ebx - shll $4,%ebx - addl TR_EIP(%esp),%ebx - - /* See if we're just trying to get out of v86 mode. */ - cmpl %ss:EXT(rv86_return_int_pa),%ebx - je EXT(rv86_return) - - /* Check the instruction (al). */ - movb (%ebx),%al - cmpb $0xcd,%al - je gpf_int_n - - UNEXPECTED_TRAP - - -gpf_int_n: - - /* Bump the ip past the int instruction. */ - addw $2,TR_EIP(%esp) - - /* Find the real mode interrupt vector number (esi). */ - movzbl 1(%ebx),%esi - - /* See if it's a copy-extended-memory interrupt request; - if so, just handle it here. */ - cmpl $0x15,%esi - jne 1f - cmpb $0x87,TR_EAX+1(%esp) - je copy_ext_mem -1: - - /* XXX The stuff down here is essentially the same as in moss. */ - -reflect_v86_intr: - - /* Find the address of the real mode interrupt vector (esi). */ - shll $2,%esi - - /* Make room for the real-mode interrupt stack frame. */ - subw $6,TR_ESP(%esp) - - /* Find the physical address of the v86 stack (ebx). */ - movzwl TR_SS(%esp),%ebx - shll $4,%ebx - addl TR_ESP(%esp),%ebx - - /* Store the return information into the v86 stack frame. */ - movl TR_EIP(%esp),%eax - movw %ax,(%ebx) - movl TR_CS(%esp),%eax - movw %ax,2(%ebx) - movl TR_EFLAGS(%esp),%eax - movw %ax,4(%ebx) - - /* Find the real-mode interrupt vector to invoke, - and set up the real_call_thread's kernel stack frame - to point to it. */ - movl (%esi),%eax - movw %ax,TR_EIP(%esp) - shrl $16,%eax - movw %ax,TR_CS(%esp) - andl $-1-EFL_IF-EFL_TF,TR_EFLAGS(%esp) - - /* Restore saved state and return. */ - addl $4*4,%esp - popa - addl $4*2,%esp - iret - - - -/* We intercepted a copy-extended-memory software interrupt - (int 0x15 function 0x87). - This is used by HIMEM.SYS, for example, to manage extended memory. - The BIOS's routine isn't going to work in v86 mode, - so do it ourselves. */ -copy_ext_mem: - - /* Find the parameter block provided by the caller (ebx). */ - movzwl TR_V86_ES(%esp),%ebx - movzwl TR_ESI(%esp),%eax - shll $4,%ebx - addl %eax,%ebx - - /* Source address (esi). */ - movl 0x12(%ebx),%esi - andl $0x00ffffff,%esi - - /* Destination address (edi). */ - movl 0x1a(%ebx),%edi - andl $0x00ffffff,%edi - - /* Number of bytes (ecx). */ - movzwl TR_ECX(%esp),%ecx - addl %ecx,%ecx - - /* Use the standard i386 bcopy routine to copy the data. - This assumes it's "friendly" in its use of segment registers - (i.e. always uses ss for stack data and ds/es for the data to copy). - The bcopy is simple enough that this should always be true. */ - movw %ds,%ax - movw %ax,%es - cld - pushl %ecx - pushl %edi - pushl %esi - call EXT(bcopy) - addl $3*4,%esp - - /* Clear the carry flag to indicate that the copy was successful. - AH is also cleared, below. */ - andl $-1-EFL_CF,TR_EFLAGS(%esp) - - /* Restore saved state and return. */ - addl $4*4,%esp - popa - xorb %ah,%ah - addl $4*2,%esp - iret - diff --git a/i386/pc/rv86/trap_handler.S b/i386/pc/rv86/trap_handler.S deleted file mode 100644 index 99254ee..0000000 --- a/i386/pc/rv86/trap_handler.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (c) 1995-1994 The University of Utah and - * the Computer Systems Laboratory at the University of Utah (CSL). - * All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the - * Computer Systems Laboratory at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSL requests users of this software to return to csl-dist@cs.utah.edu any - * improvements that they make and grant CSL redistribution rights. - * - * Author: Bryan Ford, University of Utah CSL - */ - -#include <mach/machine/asm.h> -#include <mach/machine/eflags.h> - -#include "trap.h" -#include "trap_asm.h" - - .text - -ENTRY(trap_handler) - - /* See if we came from v86 mode. */ - testl $EFL_VM,TR_EFLAGS(%esp) - jnz EXT(rv86_trap_handler) - - UNEXPECTED_TRAP - |