summaryrefslogtreecommitdiff
path: root/linux
diff options
context:
space:
mode:
authorMarcus Brinkmann <marcus@gnu.org>2001-08-18 00:56:42 +0000
committerMarcus Brinkmann <marcus@gnu.org>2001-08-18 00:56:42 +0000
commitbd4568df4e4ebfcd333a36c44afd58a8717a8722 (patch)
tree1364c96451a88d2bb7861a3828b984a8bef695e1 /linux
parent4c582b3d2422525c041874eeb7eb2d3af683a84b (diff)
2001-08-18 Marcus Brinkmann <marcus@gnu.org>
* linux/src/drivers/net/eepro100.c: File updated to version in Linux 2.2.19. This time for real.
Diffstat (limited to 'linux')
-rw-r--r--linux/src/drivers/net/eepro100.c1930
1 files changed, 1284 insertions, 646 deletions
diff --git a/linux/src/drivers/net/eepro100.c b/linux/src/drivers/net/eepro100.c
index 4e6db45..a2a6e30 100644
--- a/linux/src/drivers/net/eepro100.c
+++ b/linux/src/drivers/net/eepro100.c
@@ -1,82 +1,143 @@
-/* drivers/net/eepro100.c: An Intel i82557 Ethernet driver for Linux. */
+/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */
/*
- NOTICE: this version tested with kernels 1.3.72 and later only!
- Written 1996-1998 by Donald Becker.
+ NOTICE: this version of the driver is supposed to work with 2.2 kernels.
+ Written 1996-1999 by Donald Becker.
This software may be used and distributed according to the terms
of the GNU Public License, incorporated herein by reference.
- This driver is for the Intel EtherExpress Pro 100B boards.
- It should work with other i82557 boards (if any others exist).
- To use a built-in driver, install as drivers/net/eepro100.c.
+ This driver is for the Intel EtherExpress Pro100 (Speedo3) design.
+ It should work with all i82557/558/559 boards.
+
To use as a module, use the compile-command at the end of the file.
The author may be reached as becker@CESDIS.usra.edu, or C/O
Center of Excellence in Space Data and Information Sciences
Code 930.5, NASA Goddard Space Flight Center, Greenbelt MD 20771
For updates see
- <base href="http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html">
+ http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
+ For installation instructions
+ http://cesdis.gsfc.nasa.gov/linux/misc/modules.html
+ There is a Majordomo mailing list based at
+ linux-eepro100@cesdis.gsfc.nasa.gov
+
+ The driver also contains updates by different kernel developers.
+ This driver clone is maintained by Andrey V. Savochkin <saw@saw.sw.com.sg>.
+ Please use this email address and linux-kernel mailing list for bug reports.
+
+ Modification history:
+ 2000 Mar 24 Dragan Stancevic <visitor@valinux.com>
+ Disabled FC and ER, to avoid lockups when when we get FCP interrupts.
+ 2000 May 27 Andrey Moruga <moruga@sw.com.sg>
+ Code duplication for 82559ER support was removed.
+ Accurate handling of all supported chips was implemented.
+ Some fixes in 2.3 clone of the driver were ported.
+ 2000 May 30 Dragan Stancevic <visitor@valinux.com> and
+ Andrey Moruga <moruga@sw.com.sg>
+ Honor PortReset timing specification.
+ 2000 Jul 25 Dragan Stancevic <visitor@valinux.com>
+ Changed to MMIO, resized FIFOs, resized rings, changed ISR timeout
+ Problem reported by:
+ Marc MERLIN <merlin@valinux.com>
+ 2000 Nov 15 Dragan Stancevic <visitor@valinux.com>
+ Changed command completion time and added debug info as to which
+ CMD timed out. Problem reported by:
+ "Ulrich Windl" <Ulrich.Windl@rz.uni-regensburg.de>
*/
+/*#define USE_IO*/
static const char *version =
-"eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov\n";
+"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html\n"
+"eepro100.c: $Revision: 1.2 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n"
+"eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15\n";
/* A few user-configurable values that apply to all boards.
- First set are undocumented and spelled per Intel recommendations. */
+ First set is undocumented and spelled per Intel recommendations. */
static int congenb = 0; /* Enable congestion control in the DP83840. */
-static int txfifo = 8; /* Tx FIFO threshold in 4 byte units, 0-15 */
-static int rxfifo = 8; /* Rx FIFO threshold, default 32 bytes. */
+static int txfifo = 0; /* Tx FIFO threshold in 4 byte units, 0-15 */
+static int rxfifo = 0xF; /* Rx FIFO threshold, default 32 bytes. */
/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */
static int txdmacount = 128;
static int rxdmacount = 0;
/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method.
Lower values use more memory, but are faster. */
+#if defined(__alpha__) || defined(__sparc__)
+/* force copying of all packets to avoid unaligned accesses on Alpha */
+static int rx_copybreak = 1518;
+#else
static int rx_copybreak = 200;
+#endif
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
+static int max_interrupt_work = 200;
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */
static int multicast_filter_limit = 64;
+/* 'options' is used to pass a transceiver override or full-duplex flag
+ e.g. "options=16" for FD, "options=32" for 100mbps-only. */
+static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
#ifdef MODULE
-#ifdef MODVERSIONS
-#include <linux/modversions.h>
+static int debug = -1; /* The debug level */
#endif
-#include <linux/module.h>
-#else
-#define MOD_INC_USE_COUNT
-#define MOD_DEC_USE_COUNT
+
+/* A few values that may be tweaked. */
+/* The ring sizes should be a power of two for efficiency. */
+#define TX_RING_SIZE 64
+#define RX_RING_SIZE 64
+/* How much slots multicast filter setup may take.
+ Do not descrease without changing set_rx_mode() implementaion. */
+#define TX_MULTICAST_SIZE 2
+#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2)
+/* Actual number of TX packets queued, must be
+ <= TX_RING_SIZE-TX_MULTICAST_RESERV. */
+#define TX_QUEUE_LIMIT (TX_RING_SIZE-TX_MULTICAST_RESERV)
+/* Hysteresis marking queue as no longer full. */
+#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4)
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
+#define PKT_BUF_SZ 1536
+
+#if !defined(__OPTIMIZE__) || !defined(__KERNEL__)
+#warning You must compile this file with the correct options!
+#warning See the last lines of the source file.
+#error You must compile this driver with "-O".
#endif
#include <linux/version.h>
+#include <linux/module.h>
+#if defined(MODVERSIONS)
+#include <linux/modversions.h>
+#endif
+
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
-#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/malloc.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/bios32.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/spinlock.h>
+
#include <asm/bitops.h>
#include <asm/io.h>
-#include <asm/dma.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
-/* Unused in the 2.0.* version, but retained for documentation. */
-#if LINUX_VERSION_CODE > 0x20118
-MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>");
-MODULE_DESCRIPTION("Intel i82557/i82558 EtherExpressPro driver");
+#if defined(MODULE)
+MODULE_AUTHOR("Maintainer: Andrey V. Savochkin <saw@saw.sw.com.sg>");
+MODULE_DESCRIPTION("Intel i82557/i82558 PCI EtherExpressPro driver");
MODULE_PARM(debug, "i");
MODULE_PARM(options, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i");
@@ -91,9 +152,31 @@ MODULE_PARM(multicast_filter_limit, "i");
#endif
#define RUN_AT(x) (jiffies + (x))
-
-#if (LINUX_VERSION_CODE < 0x20123)
-#define test_and_set_bit(val, addr) set_bit(val, addr)
+/* Condensed bus+endian portability operations. */
+#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
+#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+
+#define net_device device
+#define pci_base_address(p, n) (p)->base_address[n]
+
+#define dev_free_skb(skb) dev_kfree_skb(skb);
+#define netif_wake_queue(dev) do { \
+ clear_bit(0, (void*)&dev->tbusy); \
+ mark_bh(NET_BH); \
+ } while(0)
+#define netif_start_queue(dev) clear_bit(0, (void*)&dev->tbusy)
+#define netif_stop_queue(dev) set_bit(0, (void*)&dev->tbusy)
+#ifndef PCI_DEVICE_ID_INTEL_82559ER
+#define PCI_DEVICE_ID_INTEL_82559ER 0x1209
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID1029
+#define PCI_DEVICE_ID_INTEL_ID1029 0x1029
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID1030
+#define PCI_DEVICE_ID_INTEL_ID1030 0x1030
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID2449
+#define PCI_DEVICE_ID_INTEL_ID2449 0x2449
#endif
/* The total I/O port extent of the board.
@@ -132,7 +215,7 @@ single buffer descriptor with each frame descriptor.
Despite the extra space overhead in each receive skbuff, the driver must use
the simplified Rx buffer mode to assure that only a single data buffer is
associated with each RxFD. The driver implements this by reserving space
-for the Rx descriptor at the head of each Rx skbuff
+for the Rx descriptor at the head of each Rx skbuff.
The Speedo-3 has receive and command unit base addresses that are added to
almost all descriptor pointers. The driver sets these to zero, so that all
@@ -147,10 +230,13 @@ IIIB. Transmit structure
The driver must use the complex Tx command+descriptor mode in order to
have a indirect pointer to the skbuff data section. Each Tx command block
-(TxCB) is associated with a single, immediately appended Tx buffer descriptor
+(TxCB) is associated with two immediately appended Tx Buffer Descriptor
(TxBD). A fixed ring of these TxCB+TxBD pairs are kept as part of the
speedo_private data structure for each adapter instance.
+The newer i82558 explicitly supports this structure, and can read the two
+TxBDs in the same PCI burst as the TxCB.
+
This ring structure is used for all normal transmit packets, but the
transmit packet descriptors aren't long enough for most non-Tx commands such
as CmdConfigure. This is complicated by the possibility that the chip has
@@ -181,10 +267,10 @@ Note: Watch out for the potential race condition here: imagine
doing the CU_RESUME
the chip processes the next-yet-valid post-final-command.
So blindly sending a CU_RESUME is only safe if we do it immediately after
-erasing the previous CmdSuspend, without the possibility of an intervening
-delay. Thus the resume command is always within the interrupts-disabled
-region. This is a timing dependence, but handling this condition in a
-timing-independent way would considerably complicate the code.
+after erasing the previous CmdSuspend, without the possibility of an
+intervening delay. Thus the resume command is always within the
+interrupts-disabled region. This is a timing dependence, but handling this
+condition in a timing-independent way would considerably complicate the code.
Note: In previous generation Intel chips, restarting the command unit was a
notoriously slow process. This is presumably no longer true.
@@ -205,24 +291,6 @@ allocate a new, minimally-sized skbuff. For large frames the copying cost
is non-trivial, and the larger copy might flush the cache of useful data, so
we pass up the skbuff the packet was received into.
-IIID. Synchronization
-The driver runs as two independent, single-threaded flows of control. One
-is the send-packet routine, which enforces single-threaded use by the
-dev->tbusy flag. The other thread is the interrupt handler, which is single
-threaded by the hardware and other software.
-
-The send packet thread has partial control over the Tx ring and 'dev->tbusy'
-flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
-queue slot is empty, it clears the tbusy flag when finished otherwise it sets
-the 'sp->tx_full' flag.
-
-The interrupt handler has exclusive control over the Rx ring and records stats
-from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so
-we can't avoid the interrupt overhead by having the Tx routine reap the Tx
-stats.) After reaping the stats, it marks the queue entry as empty by setting
-the 'base' to zero. Iff the 'sp->tx_full' flag is set, it clears both the
-tx_full and tbusy flags.
-
IV. Notes
Thanks to Steve Williams of Intel for arranging the non-disclosure agreement
@@ -231,28 +299,95 @@ having to sign an Intel NDA when I'm helping Intel sell their own product!
*/
-/* A few values that may be tweaked. */
-/* The ring sizes should be a power of two for efficiency. */
-#define TX_RING_SIZE 16 /* Effectively 2 entries fewer. */
-#define RX_RING_SIZE 16
-/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
-#define PKT_BUF_SZ 1536
+/* This table drives the PCI probe routines. */
+static struct net_device *speedo_found1(struct pci_dev *pdev, int pci_bus,
+ int pci_devfn, long ioaddr,
+ int chip_idx, int card_idx);
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT ((800*HZ)/1000)
+#ifdef USE_IO
+#define SPEEDO_IOTYPE PCI_USES_MASTER|PCI_USES_IO|PCI_ADDR1
+#define SPEEDO_SIZE 32
+#else
+#define SPEEDO_IOTYPE PCI_USES_MASTER|PCI_USES_MEM|PCI_ADDR0
+#define SPEEDO_SIZE 0x1000
+#endif
-/* How to wait for the command unit to accept a command.
- Typically this takes 0 ticks. */
-static inline void wait_for_cmd_done(int cmd_ioaddr)
+enum pci_flags_bit {
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+};
+struct pci_id_info {
+ const char *name;
+ u16 vendor_id, device_id;
+ int pci_index;
+} static pci_tbl[] = {
+ { "Intel PCI EtherExpress Pro100 82557",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 82559ER",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 ID1029",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID1029,
+ 0
+ },
+ { "Intel Corporation 82559 InBusiness 10/100",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID1030,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 82562EM",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID2449,
+ 0
+ },
+ {0,} /* 0 terminated list. */
+};
+
+static inline unsigned int io_inw(unsigned long port)
+{
+ return inw(port);
+}
+static inline void io_outw(unsigned int val, unsigned long port)
{
- short wait = 100;
- do ;
- while(inb(cmd_ioaddr) && --wait >= 0);
+ outw(val, port);
}
-/* Operational parameter that usually are not changed. */
+#ifndef USE_IO
+#undef inb
+#undef inw
+#undef inl
+#undef outb
+#undef outw
+#undef outl
+#define inb readb
+#define inw readw
+#define inl readl
+#define outb writeb
+#define outw writew
+#define outl writel
+#endif
-/* The rest of these values should never change. */
+/* How to wait for the command unit to accept a command.
+ Typically this takes 0 ticks. */
+static inline void wait_for_cmd_done(long cmd_ioaddr)
+{
+ int wait = 20000;
+ char cmd_reg1, cmd_reg2;
+ do ;
+ while((cmd_reg1 = inb(cmd_ioaddr)) && (--wait >= 0));
+
+ /* Last chance to change your mind --Dragan*/
+ if (wait < 0){
+ cmd_reg2 = inb(cmd_ioaddr);
+ if(cmd_reg2){
+ printk(KERN_ALERT "eepro100: cmd_wait for(%#2.2x) timedout with(%#2.2x)!\n",
+ cmd_reg1, cmd_reg2);
+
+ }
+ }
+
+}
/* Offsets to the various registers.
All accesses need not be longword aligned. */
@@ -266,34 +401,45 @@ enum speedo_offsets {
};
/* Commands that can be put in a command list entry. */
enum commands {
- CmdNOp = 0, CmdIASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
- CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7,
- CmdSuspend = 0x4000, /* Suspend after completion. */
- CmdIntr = 0x2000, /* Interrupt after completion. */
- CmdTxFlex = 0x0008, /* Use "Flexible mode" for CmdTx command. */
+ CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000,
+ CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000,
+ CmdDump = 0x60000, CmdDiagnose = 0x70000,
+ CmdSuspend = 0x40000000, /* Suspend after completion. */
+ CmdIntr = 0x20000000, /* Interrupt after completion. */
+ CmdTxFlex = 0x00080000, /* Use "Flexible mode" for CmdTx command. */
};
+/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the
+ status bits. Previous driver versions used separate 16 bit fields for
+ commands and statuses. --SAW
+ */
+#if defined(__LITTLE_ENDIAN)
+#define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x4000
+#elif defined(__BIG_ENDIAN)
+#define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x0040
+#else
+#error Unsupported byteorder
+#endif
-/* The SCB accepts the following controls for the Tx and Rx units: */
-#define CU_START 0x0010
-#define CU_RESUME 0x0020
-#define CU_STATSADDR 0x0040
-#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
-#define CU_CMD_BASE 0x0060 /* Base address to add to add CU commands. */
-#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
-
-#define RX_START 0x0001
-#define RX_RESUME 0x0002
-#define RX_ABORT 0x0004
-#define RX_ADDR_LOAD 0x0006
-#define RX_RESUMENR 0x0007
-#define INT_MASK 0x0100
-#define DRVR_INT 0x0200 /* Driver generated interrupt. */
+enum SCBCmdBits {
+ SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
+ SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
+ SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
+ /* The rest are Rx and Tx commands. */
+ CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
+ CUCmdBase=0x0060, /* CU Base address (set to zero) . */
+ CUDumpStats=0x0070, /* Dump then reset stats counters. */
+ RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
+ RxResumeNoResources=0x0007,
+};
+
+enum SCBPort_cmds {
+ PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3,
+};
/* The Speedo3 Rx and Tx frame/buffer descriptors. */
-struct descriptor { /* A generic descriptor. */
- s16 status; /* Offset 0. */
- s16 command; /* Offset 2. */
- u32 link; /* struct descriptor * */
+struct descriptor { /* A generic descriptor. */
+ s32 cmd_status; /* All command and status fields. */
+ u32 link; /* struct descriptor * */
unsigned char params[0];
};
@@ -302,21 +448,34 @@ struct RxFD { /* Receive frame descriptor. */
s32 status;
u32 link; /* struct RxFD * */
u32 rx_buf_addr; /* void * */
- u16 count;
- u16 size;
+ u32 count;
};
-/* Elements of the RxFD.status word. */
-#define RX_COMPLETE 0x8000
+/* Selected elements of the Tx/RxFD.status word. */
+enum RxFD_bits {
+ RxComplete=0x8000, RxOK=0x2000,
+ RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010,
+ RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002,
+ TxUnderrun=0x1000, StatusComplete=0x8000,
+};
struct TxFD { /* Transmit frame descriptor set. */
s32 status;
u32 link; /* void * */
u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
s32 count; /* # of TBD (=1), Tx start thresh., etc. */
- /* This constitutes a single "TBD" entry -- we only use one. */
- u32 tx_buf_addr; /* void *, frame to be transmitted. */
- s32 tx_buf_size; /* Length of Tx frame. */
+ /* This constitutes two "TBD" entries -- we only use one. */
+ u32 tx_buf_addr0; /* void *, frame to be transmitted. */
+ s32 tx_buf_size0; /* Length of Tx frame. */
+ u32 tx_buf_addr1; /* void *, frame to be transmitted. */
+ s32 tx_buf_size1; /* Length of Tx frame. */
+};
+
+/* Multicast filter setting block. --SAW */
+struct speedo_mc_block {
+ struct speedo_mc_block *next;
+ unsigned int tx;
+ struct descriptor frame __attribute__ ((__aligned__(16)));
};
/* Elements of the dump_statistics block. This block must be lword aligned. */
@@ -340,47 +499,63 @@ struct speedo_stats {
u32 done_marker;
};
+enum Rx_ring_state_bits {
+ RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8,
+};
+
+/* Do not change the position (alignment) of the first few elements!
+ The later elements are grouped for cache locality. */
struct speedo_private {
- char devname[8]; /* Used only for kernel debugging. */
- const char *product_name;
- struct device *next_module;
struct TxFD tx_ring[TX_RING_SIZE]; /* Commands (usually CmdTxPacket). */
- /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct RxFD *rx_ringp[RX_RING_SIZE]; /* Rx descriptor, used as ring. */
+ /* The addresses of a Tx/Rx-in-place packets/buffers. */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
- struct descriptor *last_cmd; /* Last command sent. */
- /* Rx descriptor ring & addresses of receive-in-place skbuffs. */
- struct RxFD *rx_ringp[RX_RING_SIZE];
struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ struct descriptor *last_cmd; /* Last command sent. */
+ unsigned int cur_tx, dirty_tx; /* The ring entries to be free()ed. */
+ spinlock_t lock; /* Group with Tx control cache line. */
+ u32 tx_threshold; /* The value for txdesc.count. */
struct RxFD *last_rxf; /* Last command sent. */
+ unsigned int cur_rx, dirty_rx; /* The next free ring entry */
+ long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
+ const char *product_name;
+ struct net_device *next_module;
+ void *priv_addr; /* Unaligned address for kfree */
struct enet_statistics stats;
struct speedo_stats lstats;
+ int chip_id;
+ unsigned char pci_bus, pci_devfn, acpi_pwr;
struct timer_list timer; /* Media selection timer. */
- long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
- unsigned int cur_rx, cur_tx; /* The next free ring entry */
- unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
- struct descriptor config_cmd; /* A configure command, with header... */
- u8 config_cmd_data[22]; /* .. and setup parameters. */
- int mc_setup_frm_len; /* The length of an allocated.. */
- struct descriptor *mc_setup_frm; /* ..multicast setup frame. */
+ struct speedo_mc_block *mc_setup_head;/* Multicast setup frame list head. */
+ struct speedo_mc_block *mc_setup_tail;/* Multicast setup frame list tail. */
int in_interrupt; /* Word-aligned dev->interrupt */
char rx_mode; /* Current PROMISC/ALLMULTI setting. */
unsigned int tx_full:1; /* The Tx queue is full. */
unsigned int full_duplex:1; /* Full-duplex operation requested. */
- unsigned int default_port:1; /* Last dev->if_port value. */
+ unsigned int flow_ctrl:1; /* Use 802.3x flow control. */
unsigned int rx_bug:1; /* Work around receiver hang errata. */
unsigned int rx_bug10:1; /* Receiver might hang at 10mbps. */
unsigned int rx_bug100:1; /* Receiver might hang at 100mbps. */
+ unsigned char default_port:8; /* Last dev->if_port value. */
+ unsigned char rx_ring_state; /* RX ring status flags. */
unsigned short phy[2]; /* PHY media interfaces available. */
+ unsigned short advertising; /* Current PHY advertised caps. */
+ unsigned short partner; /* Link partner caps. */
};
/* The parameters for a CmdConfigure operation.
There are so many options that it would be difficult to document each bit.
We mostly use the default or recommended settings. */
-const char basic_config_cmd[22] = {
- 22, 0x08, 0, 0, 0, 0x80, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
+const char i82557_config_cmd[22] = {
+ 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
0, 0x2E, 0, 0x60, 0,
0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
0x3f, 0x05, };
+const char i82558_config_cmd[22] = {
+ 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0x08, 0x88,
+ 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */
+ 0x31, 0x05, };
/* PHY media interface chips. */
static const char *phys[] = {
@@ -391,65 +566,91 @@ static const char *phys[] = {
enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240,
S80C24, I82555, DP83840A=10, };
static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 };
+#define EE_READ_CMD (6)
-static void speedo_found1(struct device *dev, int ioaddr, int irq,
- int card_idx);
-
-static int read_eeprom(int ioaddr, int location);
-static int mdio_read(int ioaddr, int phy_id, int location);
-static int mdio_write(int ioaddr, int phy_id, int location, int value);
-static int speedo_open(struct device *dev);
+static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len);
+static int mdio_read(long ioaddr, int phy_id, int location);
+static int mdio_write(long ioaddr, int phy_id, int location, int value);
+static int speedo_open(struct net_device *dev);
+static void speedo_resume(struct net_device *dev);
static void speedo_timer(unsigned long data);
-static void speedo_init_rx_ring(struct device *dev);
-static int speedo_start_xmit(struct sk_buff *skb, struct device *dev);
-static int speedo_rx(struct device *dev);
+static void speedo_init_rx_ring(struct net_device *dev);
+static void speedo_tx_timeout(struct net_device *dev);
+static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void speedo_refill_rx_buffers(struct net_device *dev, int force);
+static int speedo_rx(struct net_device *dev);
+static void speedo_tx_buffer_gc(struct net_device *dev);
static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
-static int speedo_close(struct device *dev);
-static struct enet_statistics *speedo_get_stats(struct device *dev);
-static int speedo_ioctl(struct device *dev, struct ifreq *rq, int cmd);
-static void set_rx_mode(struct device *dev);
+static int speedo_close(struct net_device *dev);
+static struct enet_statistics *speedo_get_stats(struct net_device *dev);
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void speedo_show_state(struct net_device *dev);
-/* The parameters that may be passed in... */
-/* 'options' is used to pass a transceiver override or full-duplex flag
- e.g. "options=16" for FD, "options=32" for 100mbps-only. */
-static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-#ifdef MODULE
-static int debug = -1; /* The debug level */
+#ifdef honor_default_port
+/* Optional driver feature to allow forcing the transceiver setting.
+ Not recommended. */
+static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100,
+ 0x2000, 0x2100, 0x0400, 0x3100};
#endif
/* A list of all installed Speedo devices, for removing the driver module. */
-static struct device *root_speedo_dev = NULL;
+static struct net_device *root_speedo_dev = NULL;
-int eepro100_init(struct device *dev)
+int eepro100_init(void)
{
int cards_found = 0;
+ int chip_idx;
+ struct pci_dev *pdev;
- if (pcibios_present()) {
- static int pci_index = 0;
- for (; pci_index < 8; pci_index++) {
- unsigned char pci_bus, pci_device_fn, pci_irq_line, pci_latency;
- int pci_ioaddr;
+ if (! pcibios_present())
+ return cards_found;
- unsigned short pci_command, new_command;
+ for (chip_idx = 0; pci_tbl[chip_idx].name; chip_idx++) {
+ for (; pci_tbl[chip_idx].pci_index < 8; pci_tbl[chip_idx].pci_index++) {
+ unsigned char pci_bus, pci_device_fn, pci_latency;
+ unsigned long pciaddr;
+ long ioaddr;
+ int irq;
- if (pcibios_find_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82557,
- pci_index, &pci_bus,
+ u16 pci_command, new_command;
+
+ if (pcibios_find_device(pci_tbl[chip_idx].vendor_id,
+ pci_tbl[chip_idx].device_id,
+ pci_tbl[chip_idx].pci_index, &pci_bus,
&pci_device_fn))
- break;
- pcibios_read_config_byte(pci_bus, pci_device_fn,
- PCI_INTERRUPT_LINE, &pci_irq_line);
- /* Note: BASE_ADDRESS_0 is for memory-mapping the registers. */
- pcibios_read_config_dword(pci_bus, pci_device_fn,
- PCI_BASE_ADDRESS_1, &pci_ioaddr);
+ break;
+ {
+ pdev = pci_find_slot(pci_bus, pci_device_fn);
+#ifdef USE_IO
+ pciaddr = pci_base_address(pdev, 1); /* Use [0] to mem-map */
+#else
+ pciaddr = pci_base_address(pdev, 0);
+#endif
+ irq = pdev->irq;
+ }
/* Remove I/O space marker in bit 0. */
- pci_ioaddr &= ~3;
+ if (pciaddr & 1) {
+ ioaddr = pciaddr & ~3UL;
+ if (check_region(ioaddr, 32))
+ continue;
+ } else {
+#ifdef __sparc__
+ /* ioremap is hosed in 2.2.x on Sparc. */
+ ioaddr = pciaddr & ~0xfUL;
+#else
+ if ((ioaddr = (long)ioremap(pciaddr & ~0xfUL, 0x1000)) == 0) {
+ printk(KERN_INFO "Failed to map PCI address %#lx.\n",
+ pciaddr);
+ continue;
+ }
+#endif
+ }
if (speedo_debug > 2)
- printk("Found Intel i82557 PCI Speedo at I/O %#x, IRQ %d.\n",
- (int)pci_ioaddr, pci_irq_line);
+ printk("Found Intel i82557 PCI Speedo at I/O %#lx, IRQ %d.\n",
+ ioaddr, irq);
/* Get and check the bus-master and latency values. */
pcibios_read_config_word(pci_bus, pci_device_fn,
@@ -463,7 +664,7 @@ int eepro100_init(struct device *dev)
PCI_COMMAND, new_command);
}
pcibios_read_config_byte(pci_bus, pci_device_fn,
- PCI_LATENCY_TIMER, &pci_latency);
+ PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 32) {
printk(" PCI latency timer (CFLT) is unreasonably low at %d."
" Setting to 32 clocks.\n", pci_latency);
@@ -472,30 +673,33 @@ int eepro100_init(struct device *dev)
} else if (speedo_debug > 1)
printk(" PCI latency timer (CFLT) is %#x.\n", pci_latency);
- speedo_found1(dev, pci_ioaddr, pci_irq_line, cards_found);
- dev = NULL;
- cards_found++;
+ if (speedo_found1(pdev, pci_bus, pci_device_fn, ioaddr, chip_idx, cards_found))
+ cards_found++;
}
}
return cards_found;
}
-static void speedo_found1(struct device *dev, int ioaddr, int irq,
- int card_idx)
+static struct net_device *speedo_found1(struct pci_dev *pdev, int pci_bus,
+ int pci_devfn, long ioaddr,
+ int chip_idx, int card_idx)
{
- static int did_version = 0; /* Already printed version info. */
+ struct net_device *dev;
struct speedo_private *sp;
- char *product;
+ const char *product;
int i, option;
- u16 eeprom[0x40];
-
+ u16 eeprom[0x100];
+ int acpi_idle_state = 0;
+#ifndef MODULE
+ static int did_version = 0; /* Already printed version info. */
if (speedo_debug > 0 && did_version++ == 0)
printk(version);
+#endif
- dev = init_etherdev(dev, sizeof(struct speedo_private));
+ dev = init_etherdev(NULL, sizeof(struct speedo_private));
- if (dev->mem_start > 0)
+ if (dev->mem_start > 0)
option = dev->mem_start;
else if (card_idx >= 0 && options[card_idx] >= 0)
option = options[card_idx];
@@ -503,13 +707,30 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
option = 0;
/* Read the station address EEPROM before doing the reset.
- Perhaps this should even be done before accepting the device,
- then we wouldn't have a device name with which to report the error. */
+ Nominally his should even be done before accepting the device, but
+ then we wouldn't have a device name with which to report the error.
+ The size test is for 6 bit vs. 8 bit address serial EEPROMs.
+ */
{
- u16 sum = 0;
+ unsigned long iobase;
+ int read_cmd, ee_size;
+ u16 sum;
int j;
- for (j = 0, i = 0; i < 0x40; i++) {
- u16 value = read_eeprom(ioaddr, i);
+
+ /* Use IO only to avoid postponed writes and satisfy EEPROM timing
+ requirements. */
+ iobase = pci_base_address(pdev, 1) & ~3UL;
+ if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000)
+ == 0xffe0000) {
+ ee_size = 0x100;
+ read_cmd = EE_READ_CMD << 24;
+ } else {
+ ee_size = 0x40;
+ read_cmd = EE_READ_CMD << 22;
+ }
+
+ for (j = 0, i = 0, sum = 0; i < ee_size; i++) {
+ u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27);
eeprom[i] = value;
sum += value;
if (i < 3) {
@@ -522,26 +743,34 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
"check settings before activating this device!\n",
dev->name, sum);
/* Don't unregister_netdev(dev); as the EEPro may actually be
- usable, especially if the MAC address is set later. */
+ usable, especially if the MAC address is set later.
+ On the other hand, it may be unusable if MDI data is corrupted. */
}
/* Reset the chip: stop Tx and Rx processes and clear counters.
This takes less than 10usec and will easily finish before the next
action. */
- outl(0, ioaddr + SCBPort);
+ outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
+ /* Honor PortReset timing. */
+ udelay(10);
if (eeprom[3] & 0x0100)
product = "OEM i82557/i82558 10/100 Ethernet";
else
- product = "Intel EtherExpress Pro 10/100";
+ product = pci_tbl[chip_idx].name;
- printk(KERN_INFO "%s: %s at %#3x, ", dev->name, product, ioaddr);
+ printk(KERN_INFO "%s: %s, ", dev->name, product);
for (i = 0; i < 5; i++)
printk("%2.2X:", dev->dev_addr[i]);
- printk("%2.2X, IRQ %d.\n", dev->dev_addr[i], irq);
+ printk("%2.2X, ", dev->dev_addr[i]);
+#ifdef USE_IO
+ printk("I/O at %#3lx, ", ioaddr);
+#endif
+ printk("IRQ %d.\n", pdev->irq);
-#ifndef kernel_bloat
+#if 1 || defined(kernel_bloat)
/* OK, this is pure kernel bloat. I don't like it when other drivers
waste non-pageable kernel space to emit similar messages, but I need
them for bug reports. */
@@ -550,7 +779,7 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
/* The self-test results must be paragraph aligned. */
s32 str[6], *volatile self_test_results;
int boguscnt = 16000; /* Timeout for set-test. */
- if (eeprom[3] & 0x03)
+ if ((eeprom[3] & 0x03) != 0x03)
printk(KERN_INFO " Receiver lock-up bug exists -- enabling"
" work-around.\n");
printk(KERN_INFO " Board assembly %4.4x%2.2x-%3.3d, Physical"
@@ -586,7 +815,7 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
self_test_results = (s32*) ((((long) str) + 15) & ~0xf);
self_test_results[0] = 0;
self_test_results[1] = -1;
- outl(virt_to_bus(self_test_results) | 1, ioaddr + SCBPort);
+ outl(virt_to_bus(self_test_results) | PortSelfTest, ioaddr + SCBPort);
do {
udelay(10);
} while (self_test_results[1] == -1 && --boguscnt >= 0);
@@ -610,21 +839,32 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
}
#endif /* kernel_bloat */
- outl(0, ioaddr + SCBPort);
+ outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
+ /* Honor PortReset timing. */
+ udelay(10);
/* We do a request_region() only to register /proc/ioports info. */
request_region(ioaddr, SPEEDO3_TOTAL_SIZE, "Intel Speedo3 Ethernet");
dev->base_addr = ioaddr;
- dev->irq = irq;
+ dev->irq = pdev->irq;
- if (dev->priv == NULL)
- dev->priv = kmalloc(sizeof(*sp), GFP_KERNEL);
sp = dev->priv;
+ if (dev->priv == NULL) {
+ void *mem = kmalloc(sizeof(*sp), GFP_KERNEL);
+ dev->priv = sp = mem; /* Cache align here if kmalloc does not. */
+ sp->priv_addr = mem;
+ }
memset(sp, 0, sizeof(*sp));
sp->next_module = root_speedo_dev;
root_speedo_dev = dev;
+ sp->pci_bus = pci_bus;
+ sp->pci_devfn = pci_devfn;
+ sp->chip_id = chip_idx;
+ sp->acpi_pwr = acpi_idle_state;
+
sp->full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
if (card_idx >= 0) {
if (full_duplex[card_idx] >= 0)
@@ -642,12 +882,16 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
/* The Speedo-specific entries in the device structure. */
dev->open = &speedo_open;
dev->hard_start_xmit = &speedo_start_xmit;
+#if defined(HAS_NETIF_QUEUE)
+ dev->tx_timeout = &speedo_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#endif
dev->stop = &speedo_close;
dev->get_stats = &speedo_get_stats;
dev->set_multicast_list = &set_rx_mode;
dev->do_ioctl = &speedo_ioctl;
- return;
+ return dev;
}
/* Serial EEPROM section.
@@ -656,54 +900,42 @@ static void speedo_found1(struct device *dev, int ioaddr, int irq,
#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
#define EE_CS 0x02 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x01
-#define EE_WRITE_1 0x05
#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
#define EE_ENB (0x4800 | EE_CS)
+#define EE_WRITE_0 0x4802
+#define EE_WRITE_1 0x4806
+#define EE_OFFSET SCBeeprom
+
+/* The fixes for the code were kindly provided by Dragan Stancevic
+ <visitor@valinux.com> to strictly follow Intel specifications of EEPROM
+ access timing.
+ The publicly available sheet 64486302 (sec. 3.1) specifies 1us access
+ interval for serial EEPROM. However, it looks like that there is an
+ additional requirement dictating larger udelay's in the code below.
+ 2000/05/24 SAW */
+static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len)
+{
+ unsigned retval = 0;
+ long ee_addr = ioaddr + SCBeeprom;
-/* Delay between EEPROM clock transitions.
- This will actually work with no delay on 33Mhz PCI. */
-#define eeprom_delay(nanosec) udelay(1);
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD (5 << 6)
-#define EE_READ_CMD (6 << 6)
-#define EE_ERASE_CMD (7 << 6)
+ io_outw(EE_ENB, ee_addr); udelay(2);
+ io_outw(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2);
-static int read_eeprom(int ioaddr, int location)
-{
- int i;
- unsigned short retval = 0;
- int ee_addr = ioaddr + SCBeeprom;
- int read_cmd = location | EE_READ_CMD;
-
- outw(EE_ENB & ~EE_CS, ee_addr);
- outw(EE_ENB, ee_addr);
-
- /* Shift the read command bits out. */
- for (i = 10; i >= 0; i--) {
- short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- outw(EE_ENB | dataval, ee_addr);
- eeprom_delay(100);
- outw(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
- eeprom_delay(150);
- }
- outw(EE_ENB, ee_addr);
-
- for (i = 15; i >= 0; i--) {
- outw(EE_ENB | EE_SHIFT_CLK, ee_addr);
- eeprom_delay(100);
- retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
- outw(EE_ENB, ee_addr);
- eeprom_delay(100);
- }
+ /* Shift the command bits out. */
+ do {
+ short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+ io_outw(dataval, ee_addr); udelay(2);
+ io_outw(dataval | EE_SHIFT_CLK, ee_addr); udelay(2);
+ retval = (retval << 1) | ((io_inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ } while (--cmd_len >= 0);
+ io_outw(EE_ENB, ee_addr); udelay(2);
/* Terminate the EEPROM access. */
- outw(EE_ENB & ~EE_CS, ee_addr);
+ io_outw(EE_ENB & ~EE_CS, ee_addr);
return retval;
}
-static int mdio_read(int ioaddr, int phy_id, int location)
+static int mdio_read(long ioaddr, int phy_id, int location)
{
int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
outl(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
@@ -711,12 +943,13 @@ static int mdio_read(int ioaddr, int phy_id, int location)
val = inl(ioaddr + SCBCtrlMDI);
if (--boguscnt < 0) {
printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val);
+ break;
}
} while (! (val & 0x10000000));
return val & 0xffff;
}
-static int mdio_write(int ioaddr, int phy_id, int location, int value)
+static int mdio_write(long ioaddr, int phy_id, int location, int value)
{
int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
outl(0x04000000 | (location<<16) | (phy_id<<21) | value,
@@ -725,6 +958,7 @@ static int mdio_write(int ioaddr, int phy_id, int location, int value)
val = inl(ioaddr + SCBCtrlMDI);
if (--boguscnt < 0) {
printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val);
+ break;
}
} while (! (val & 0x10000000));
return val & 0xffff;
@@ -732,86 +966,74 @@ static int mdio_write(int ioaddr, int phy_id, int location, int value)
static int
-speedo_open(struct device *dev)
+speedo_open(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
-
-#ifdef notdef
- /* We could reset the chip, but should not need to. */
- outl(0, ioaddr + SCBPort);
- udelay(10);
-#endif
+ long ioaddr = dev->base_addr;
- if (request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ,
- "Intel EtherExpress Pro 10/100 Ethernet", dev)) {
- return -EAGAIN;
- }
if (speedo_debug > 1)
printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq);
MOD_INC_USE_COUNT;
- /* Load the statistics block address. */
- wait_for_cmd_done(ioaddr + SCBCmd);
- outl(virt_to_bus(&sp->lstats), ioaddr + SCBPointer);
- outw(INT_MASK | CU_STATSADDR, ioaddr + SCBCmd);
- sp->lstats.done_marker = 0;
-
- speedo_init_rx_ring(dev);
- wait_for_cmd_done(ioaddr + SCBCmd);
- outl(0, ioaddr + SCBPointer);
- outw(INT_MASK | RX_ADDR_LOAD, ioaddr + SCBCmd);
+ /* Set up the Tx queue early.. */
+ sp->cur_tx = 0;
+ sp->dirty_tx = 0;
+ sp->last_cmd = 0;
+ sp->tx_full = 0;
+ sp->lock = (spinlock_t) SPIN_LOCK_UNLOCKED;
+ sp->in_interrupt = 0;
- /* Todo: verify that we must wait for previous command completion. */
- wait_for_cmd_done(ioaddr + SCBCmd);
- outl(virt_to_bus(sp->rx_ringp[0]), ioaddr + SCBPointer);
- outw(INT_MASK | RX_START, ioaddr + SCBCmd);
+ /* .. we can safely take handler calls during init. */
+ if (request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ, dev->name, dev)) {
+ MOD_DEC_USE_COUNT;
+ return -EAGAIN;
+ }
- /* Fill the first command with our physical address. */
- {
- u16 *eaddrs = (u16 *)dev->dev_addr;
- u16 *setup_frm = (u16 *)&(sp->tx_ring[0].tx_desc_addr);
+ dev->if_port = sp->default_port;
- /* Avoid a bug(?!) here by marking the command already completed. */
- sp->tx_ring[0].status = ((CmdSuspend | CmdIASetup) << 16) | 0xa000;
- sp->tx_ring[0].link = virt_to_bus(&(sp->tx_ring[1]));
- *setup_frm++ = eaddrs[0];
- *setup_frm++ = eaddrs[1];
- *setup_frm++ = eaddrs[2];
+#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us
+ /* Retrigger negotiation to reset previous errors. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int phy_addr = sp->phy[0] & 0x1f ;
+ /* Use 0x3300 for restarting NWay, other values to force xcvr:
+ 0x0000 10-HD
+ 0x0100 10-FD
+ 0x2000 100-HD
+ 0x2100 100-FD
+ */
+#ifdef honor_default_port
+ mdio_write(ioaddr, phy_addr, 0, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_write(ioaddr, phy_addr, 0, 0x3300);
+#endif
}
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[0];
- sp->cur_tx = 1;
- sp->dirty_tx = 0;
- sp->tx_full = 0;
+#endif
- wait_for_cmd_done(ioaddr + SCBCmd);
- outl(0, ioaddr + SCBPointer);
- outw(INT_MASK | CU_CMD_BASE, ioaddr + SCBCmd);
+ speedo_init_rx_ring(dev);
- dev->if_port = sp->default_port;
+ /* Fire up the hardware. */
+ outw(SCBMaskAll, ioaddr + SCBCmd);
+ speedo_resume(dev);
- sp->in_interrupt = 0;
- dev->tbusy = 0;
dev->interrupt = 0;
dev->start = 1;
-
- /* Start the chip's Tx process and unmask interrupts. */
- /* Todo: verify that we must wait for previous command completion. */
- wait_for_cmd_done(ioaddr + SCBCmd);
- outl(virt_to_bus(&sp->tx_ring[0]), ioaddr + SCBPointer);
- outw(CU_START, ioaddr + SCBCmd);
+ netif_start_queue(dev);
/* Setup the chip and configure the multicast list. */
- sp->mc_setup_frm = NULL;
- sp->mc_setup_frm_len = 0;
+ sp->mc_setup_head = NULL;
+ sp->mc_setup_tail = NULL;
+ sp->flow_ctrl = sp->partner = 0;
sp->rx_mode = -1; /* Invalid -> always reset the mode. */
set_rx_mode(dev);
+ if ((sp->phy[0] & 0x8000) == 0)
+ sp->advertising = mdio_read(ioaddr, sp->phy[0] & 0x1f, 4);
if (speedo_debug > 2) {
printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n",
dev->name, inw(ioaddr + SCBStatus));
}
+
/* Set the timer. The timer serves a dual purpose:
1) to monitor the media interface (e.g. link beat) and perhaps switch
to an alternate media type
@@ -823,182 +1045,462 @@ speedo_open(struct device *dev)
sp->timer.function = &speedo_timer; /* timer handler */
add_timer(&sp->timer);
- wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_DUMPSTATS, ioaddr + SCBCmd);
+ /* No need to wait for the command unit to accept here. */
+ if ((sp->phy[0] & 0x8000) == 0)
+ mdio_read(ioaddr, sp->phy[0] & 0x1f, 0);
+
return 0;
}
+/* Start the chip hardware after a full reset. */
+static void speedo_resume(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+
+ /* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */
+ sp->tx_threshold = 0x01208000;
+
+ /* Set the segment registers to '0'. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outl(0, ioaddr + SCBPointer);
+ /* impose a delay to avoid a bug */
+ inl(ioaddr + SCBPointer);
+ udelay(10);
+ outb(RxAddrLoad, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outb(CUCmdBase, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+
+ /* Load the statistics block and rx ring addresses. */
+ outl(virt_to_bus(&sp->lstats), ioaddr + SCBPointer);
+ outb(CUStatsAddr, ioaddr + SCBCmd);
+ sp->lstats.done_marker = 0;
+ wait_for_cmd_done(ioaddr + SCBCmd);
+
+ if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n",
+ dev->name);
+ } else {
+ outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ }
+
+ outb(CUDumpStats, ioaddr + SCBCmd);
+
+ /* Fill the first command with our physical address. */
+ {
+ struct descriptor *ias_cmd;
+
+ ias_cmd =
+ (struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE];
+ /* Avoid a bug(?!) here by marking the command already completed. */
+ ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000);
+ ias_cmd->link =
+ virt_to_le32desc(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
+ memcpy(ias_cmd->params, dev->dev_addr, 6);
+ sp->last_cmd = ias_cmd;
+ }
+
+ /* Start the chip's Tx process and unmask interrupts. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outl(virt_to_bus(&sp->tx_ring[sp->dirty_tx % TX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ /* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
+ remain masked --Dragan */
+ outw(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd);
+}
+
/* Media monitoring and control. */
static void speedo_timer(unsigned long data)
{
- struct device *dev = (struct device *)data;
+ struct net_device *dev = (struct net_device *)data;
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int tickssofar = jiffies - sp->last_rx_time;
+ long ioaddr = dev->base_addr;
+ int phy_num = sp->phy[0] & 0x1f;
+ /* We have MII and lost link beat. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int partner = mdio_read(ioaddr, phy_num, 5);
+ if (partner != sp->partner) {
+ int flow_ctrl = sp->advertising & partner & 0x0400 ? 1 : 0;
+ if (speedo_debug > 2) {
+ printk(KERN_DEBUG "%s: Link status change.\n", dev->name);
+ printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n",
+ dev->name, sp->partner, partner, sp->advertising);
+ }
+ sp->partner = partner;
+ if (flow_ctrl != sp->flow_ctrl) {
+ sp->flow_ctrl = flow_ctrl;
+ sp->rx_mode = -1; /* Trigger a reload. */
+ }
+ /* Clear sticky bit. */
+ mdio_read(ioaddr, phy_num, 1);
+ /* If link beat has returned... */
+ if (mdio_read(ioaddr, phy_num, 1) & 0x0004)
+ dev->flags |= IFF_RUNNING;
+ else
+ dev->flags &= ~IFF_RUNNING;
+ }
+ }
if (speedo_debug > 3) {
- int ioaddr = dev->base_addr;
- printk(KERN_DEBUG "%s: Media selection tick, status %4.4x.\n",
+ printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n",
dev->name, inw(ioaddr + SCBStatus));
}
- if (sp->rx_bug) {
- if (tickssofar > 2*HZ || sp->rx_mode < 0) {
- /* We haven't received a packet in a Long Time. We might have been
- bitten by the receiver hang bug. This can be cleared by sending
- a set multicast list command. */
- set_rx_mode(dev);
- }
- /* We must continue to monitor the media. */
- sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */
- add_timer(&sp->timer);
+ if (sp->rx_mode < 0 ||
+ (sp->rx_bug && jiffies - sp->last_rx_time > 2*HZ)) {
+ /* We haven't received a packet in a Long Time. We might have been
+ bitten by the receiver hang bug. This can be cleared by sending
+ a set multicast list command. */
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: Sending a multicast list set command"
+ " from a timer routine.\n", dev->name);
+ set_rx_mode(dev);
}
+ /* We must continue to monitor the media. */
+ sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */
+ add_timer(&sp->timer);
+}
+
+static void speedo_show_state(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+#if 0
+ long ioaddr = dev->base_addr;
+ int phy_num = sp->phy[0] & 0x1f;
+#endif
+ int i;
+
+ /* Print a few items for debugging. */
+ if (speedo_debug > 0) {
+ int i;
+ printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n", dev->name,
+ sp->cur_tx, sp->dirty_tx);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name,
+ i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ',
+ i, sp->tx_ring[i].status);
+ }
+ printk(KERN_DEBUG "%s: Printing Rx ring"
+ " (next to receive into %u, dirty index %u).\n",
+ dev->name, sp->cur_rx, sp->dirty_rx);
+
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name,
+ sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ',
+ i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ',
+ i, (sp->rx_ringp[i] != NULL) ?
+ (unsigned)sp->rx_ringp[i]->status : 0);
+
+#if 0
+ for (i = 0; i < 16; i++) {
+ /* FIXME: what does it mean? --SAW */
+ if (i == 6) i = 21;
+ printk(KERN_DEBUG "%s: PHY index %d register %d is %4.4x.\n",
+ dev->name, phy_num, i, mdio_read(ioaddr, phy_num, i));
+ }
+#endif
+
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
static void
-speedo_init_rx_ring(struct device *dev)
+speedo_init_rx_ring(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
struct RxFD *rxf, *last_rxf = NULL;
int i;
sp->cur_rx = 0;
- sp->dirty_rx = RX_RING_SIZE - 1;
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
- skb = alloc_skb(PKT_BUF_SZ, GFP_ATOMIC);
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
sp->rx_skbuff[i] = skb;
if (skb == NULL)
- break; /* Bad news! */
+ break; /* OK. Just initially short of Rx bufs. */
skb->dev = dev; /* Mark as being used by this device. */
-
rxf = (struct RxFD *)skb->tail;
- skb_reserve(skb, sizeof(struct RxFD));
sp->rx_ringp[i] = rxf;
+ skb_reserve(skb, sizeof(struct RxFD));
if (last_rxf)
- last_rxf->link = virt_to_bus(rxf);
+ last_rxf->link = virt_to_le32desc(rxf);
last_rxf = rxf;
- rxf->status = 0x00000001; /* '1' is flag value only. */
+ rxf->status = cpu_to_le32(0x00000001); /* '1' is flag value only. */
rxf->link = 0; /* None yet. */
- /* This field unused by i82557, we use it as a consistency check. */
- rxf->rx_buf_addr = virt_to_bus(skb->tail);
-
- rxf->count = 0;
- rxf->size = PKT_BUF_SZ;
+ /* This field unused by i82557. */
+ rxf->rx_buf_addr = 0xffffffff;
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
}
+ sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
/* Mark the last entry as end-of-list. */
- last_rxf->status = 0xC0000002; /* '2' is flag value only. */
+ last_rxf->status = cpu_to_le32(0xC0000002); /* '2' is flag value only. */
sp->last_rxf = last_rxf;
}
-static void speedo_tx_timeout(struct device *dev)
+static void speedo_purge_tx(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ int entry;
- printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
- "command %4.4x.\n",
- dev->name, inw(ioaddr + SCBStatus), inw(ioaddr + SCBCmd));
-
- if ((inw(ioaddr + SCBStatus) & 0x00C0) != 0x0080) {
- printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
- dev->name);
- outl(virt_to_bus(&sp->tx_ring[sp->dirty_tx % TX_RING_SIZE]),
- ioaddr + SCBPointer);
- outw(CU_START, ioaddr + SCBCmd);
- } else {
- outw(DRVR_INT, ioaddr + SCBCmd);
+ while ((int)(sp->cur_tx - sp->dirty_tx) > 0) {
+ entry = sp->dirty_tx % TX_RING_SIZE;
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_errors++;
+ dev_free_skb(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = 0;
+ }
+ sp->dirty_tx++;
+ }
+ while (sp->mc_setup_head != NULL) {
+ struct speedo_mc_block *t;
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
}
+ sp->mc_setup_tail = NULL;
+ sp->tx_full = 0;
+ netif_wake_queue(dev);
+}
+
+static void reset_mii(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
/* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */
if ((sp->phy[0] & 0x8000) == 0) {
int phy_addr = sp->phy[0] & 0x1f;
+ int advertising = mdio_read(ioaddr, phy_addr, 4);
+ int mii_bmcr = mdio_read(ioaddr, phy_addr, 0);
mdio_write(ioaddr, phy_addr, 0, 0x0400);
mdio_write(ioaddr, phy_addr, 1, 0x0000);
mdio_write(ioaddr, phy_addr, 4, 0x0000);
mdio_write(ioaddr, phy_addr, 0, 0x8000);
+#ifdef honor_default_port
+ mdio_write(ioaddr, phy_addr, 0, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_read(ioaddr, phy_addr, 0);
+ mdio_write(ioaddr, phy_addr, 0, mii_bmcr);
+ mdio_write(ioaddr, phy_addr, 4, advertising);
+#endif
+ }
+}
+
+static void speedo_tx_timeout(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int status = inw(ioaddr + SCBStatus);
+ unsigned long flags;
+
+ printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
+ " %4.4x at %d/%d command %8.8x.\n",
+ dev->name, status, inw(ioaddr + SCBCmd),
+ sp->dirty_tx, sp->cur_tx,
+ sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status);
+
+ /* Trigger a stats dump to give time before the reset. */
+ speedo_get_stats(dev);
+
+ speedo_show_state(dev);
+#if 0
+ if ((status & 0x00C0) != 0x0080
+ && (status & 0x003C) == 0x0010) {
+ /* Only the command unit has stopped. */
+ printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
+ dev->name);
+ outl(virt_to_bus(&sp->tx_ring[sp->dirty_tx % TX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outw(CUStart, ioaddr + SCBCmd);
+ reset_mii(dev);
+ } else {
+#else
+ {
+#endif
+ start_bh_atomic();
+ /* Ensure that timer routine doesn't run! */
+ del_timer(&sp->timer);
+ end_bh_atomic();
+ /* Reset the Tx and Rx units. */
+ outl(PortReset, ioaddr + SCBPort);
+ /* We may get spurious interrupts here. But I don't think that they
+ may do much harm. 1999/12/09 SAW */
+ udelay(10);
+ /* Disable interrupts. */
+ outw(SCBMaskAll, ioaddr + SCBCmd);
+ synchronize_irq();
+ speedo_tx_buffer_gc(dev);
+ /* Free as much as possible.
+ It helps to recover from a hang because of out-of-memory.
+ It also simplifies speedo_resume() in case TX ring is full or
+ close-to-be full. */
+ speedo_purge_tx(dev);
+ speedo_refill_rx_buffers(dev, 1);
+ spin_lock_irqsave(&sp->lock, flags);
+ speedo_resume(dev);
+ sp->rx_mode = -1;
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ set_rx_mode(dev); /* it takes the spinlock itself --SAW */
+ /* Reset MII transceiver. Do it before starting the timer to serialize
+ mdio_xxx operations. Yes, it's a paranoya :-) 2000/05/09 SAW */
+ reset_mii(dev);
+ sp->timer.expires = RUN_AT(2*HZ);
+ add_timer(&sp->timer);
}
- sp->stats.tx_errors++;
- dev->trans_start = jiffies;
return;
}
static int
-speedo_start_xmit(struct sk_buff *skb, struct device *dev)
+speedo_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ long ioaddr = dev->base_addr;
int entry;
- /* Block a timer-based transmit from overlapping. This could better be
- done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
- If this ever occurs the queue layer is doing something evil! */
- if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+#if ! defined(HAS_NETIF_QUEUE)
+ if (test_bit(0, (void*)&dev->tbusy) != 0) {
int tickssofar = jiffies - dev->trans_start;
if (tickssofar < TX_TIMEOUT - 2)
return 1;
if (tickssofar < TX_TIMEOUT) {
/* Reap sent packets from the full Tx queue. */
- outw(DRVR_INT, ioaddr + SCBCmd);
+ unsigned long flags;
+ /* Take a spinlock to make wait_for_cmd_done and sending the
+ command atomic. --SAW */
+ spin_lock_irqsave(&sp->lock, flags);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outw(SCBTriggerIntr, ioaddr + SCBCmd);
+ spin_unlock_irqrestore(&sp->lock, flags);
return 1;
}
speedo_tx_timeout(dev);
return 1;
}
-
- /* Caution: the write order is important here, set the base address
- with the "ownership" bits last. */
+#endif
{ /* Prevent interrupts from changing the Tx ring from underneath us. */
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&sp->lock, flags);
+
+ /* Check if there are enough space. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name);
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ return 1;
+ }
+
/* Calculate the Tx descriptor entry. */
entry = sp->cur_tx++ % TX_RING_SIZE;
sp->tx_skbuff[entry] = skb;
- /* Todo: be a little more clever about setting the interrupt bit. */
sp->tx_ring[entry].status =
- (CmdSuspend | CmdTx | CmdTxFlex) << 16;
+ cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex);
+ if (!(entry & ((TX_RING_SIZE>>2)-1)))
+ sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr);
sp->tx_ring[entry].link =
- virt_to_bus(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
+ virt_to_le32desc(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
sp->tx_ring[entry].tx_desc_addr =
- virt_to_bus(&sp->tx_ring[entry].tx_buf_addr);
- /* The data region is always in one buffer descriptor, Tx FIFO
- threshold of 256. */
- sp->tx_ring[entry].count = 0x01208000;
- sp->tx_ring[entry].tx_buf_addr = virt_to_bus(skb->data);
- sp->tx_ring[entry].tx_buf_size = skb->len;
- /* Todo: perhaps leave the interrupt bit set if the Tx queue is more
- than half full. Argument against: we should be receiving packets
- and scavenging the queue. Argument for: if so, it shouldn't
- matter. */
- sp->last_cmd->command &= ~(CmdSuspend | CmdIntr);
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+ virt_to_le32desc(&sp->tx_ring[entry].tx_buf_addr0);
+ /* The data region is always in one buffer descriptor. */
+ sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold);
+ sp->tx_ring[entry].tx_buf_addr0 = virt_to_le32desc(skb->data);
+ sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len);
/* Trigger the command unit resume. */
wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_RESUME, ioaddr + SCBCmd);
- restore_flags(flags);
- }
+ clear_suspend(sp->last_cmd);
+ /* We want the time window between clearing suspend flag on the previous
+ command and resuming CU to be as small as possible.
+ Interrupts in between are very undesired. --SAW */
+ outb(CUResume, ioaddr + SCBCmd);
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
- /* Leave room for set_rx_mode() to fill two entries. */
- if (sp->cur_tx - sp->dirty_tx > TX_RING_SIZE - 3)
- sp->tx_full = 1;
- else
- clear_bit(0, (void*)&dev->tbusy);
+ /* Leave room for set_rx_mode(). If there is no more space than reserved
+ for multicast filter mark the ring as full. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
dev->trans_start = jiffies;
return 0;
}
+static void speedo_tx_buffer_gc(struct net_device *dev)
+{
+ unsigned int dirty_tx;
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+
+ dirty_tx = sp->dirty_tx;
+ while ((int)(sp->cur_tx - dirty_tx) > 0) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(sp->tx_ring[entry].status);
+
+ if (speedo_debug > 5)
+ printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
+ entry, status);
+ if ((status & StatusComplete) == 0)
+ break; /* It still hasn't been processed. */
+ if (status & TxUnderrun)
+ if (sp->tx_threshold < 0x01e08000) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n",
+ dev->name);
+ sp->tx_threshold += 0x00040000;
+ }
+ /* Free the original skb. */
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_packets++; /* Count only user packets. */
+ sp->stats.tx_bytes += sp->tx_skbuff[entry]->len;
+ dev_free_skb(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = 0;
+ }
+ dirty_tx++;
+ }
+
+ if (speedo_debug && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) {
+ printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
+ " full=%d.\n",
+ dirty_tx, sp->cur_tx, sp->tx_full);
+ dirty_tx += TX_RING_SIZE;
+ }
+
+ while (sp->mc_setup_head != NULL
+ && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) {
+ struct speedo_mc_block *t;
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ if (sp->mc_setup_head == NULL)
+ sp->mc_setup_tail = NULL;
+
+ sp->dirty_tx = dirty_tx;
+}
+
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
- struct device *dev = (struct device *)dev_instance;
+ struct net_device *dev = (struct net_device *)dev_instance;
struct speedo_private *sp;
- int ioaddr, boguscnt = max_interrupt_work;
+ long ioaddr, boguscnt = max_interrupt_work;
unsigned short status;
#ifndef final_version
@@ -1010,11 +1512,13 @@ static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
ioaddr = dev->base_addr;
sp = (struct speedo_private *)dev->priv;
+
#ifndef final_version
/* A lock to prevent simultaneous entry on SMP machines. */
if (test_and_set_bit(0, (void*)&sp->in_interrupt)) {
printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
dev->name);
+ sp->in_interrupt = 0; /* Avoid halting machine. */
return;
}
dev->interrupt = 1;
@@ -1023,76 +1527,109 @@ static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
do {
status = inw(ioaddr + SCBStatus);
/* Acknowledge all of the current interrupt sources ASAP. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
outw(status & 0xfc00, ioaddr + SCBStatus);
- if (speedo_debug > 4)
+ if (speedo_debug > 3)
printk(KERN_DEBUG "%s: interrupt status=%#4.4x.\n",
dev->name, status);
if ((status & 0xfc00) == 0)
break;
- if (status & 0x4000) /* Packet received. */
+ /* Always check if all rx buffers are allocated. --SAW */
+ speedo_refill_rx_buffers(dev, 0);
+
+ if ((status & 0x5000) || /* Packet received, or Rx error. */
+ (sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed)
+ /* Need to gather the postponed packet. */
speedo_rx(dev);
if (status & 0x1000) {
- if ((status & 0x003c) == 0x0028) /* No more Rx buffers. */
- outw(RX_RESUMENR, ioaddr + SCBCmd);
- else if ((status & 0x003c) == 0x0008) { /* No resources (why?!) */
- /* No idea of what went wrong. Restart the receiver. */
+ spin_lock(&sp->lock);
+ if ((status & 0x003c) == 0x0028) { /* No more Rx buffers. */
+ struct RxFD *rxf;
+ printk(KERN_WARNING "%s: card reports no RX buffers.\n",
+ dev->name);
+ rxf = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
+ if (rxf == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: NULL cur_rx in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else if (rxf == sp->last_rxf) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: cur_rx is last in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else
+ outb(RxResumeNoResources, ioaddr + SCBCmd);
+ } else if ((status & 0x003c) == 0x0008) { /* No resources. */
+ struct RxFD *rxf;
+ printk(KERN_WARNING "%s: card reports no resources.\n",
+ dev->name);
+ rxf = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
+ if (rxf == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: NULL cur_rx in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else if (rxf == sp->last_rxf) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: cur_rx is last in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else {
+ /* Restart the receiver. */
+ outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ }
+ }
+ sp->stats.rx_errors++;
+ spin_unlock(&sp->lock);
+ }
+
+ if ((sp->rx_ring_state&(RrNoMem|RrNoResources)) == RrNoResources) {
+ printk(KERN_WARNING
+ "%s: restart the receiver after a possible hang.\n",
+ dev->name);
+ spin_lock(&sp->lock);
+ /* Restart the receiver.
+ I'm not sure if it's always right to restart the receiver
+ here but I don't know another way to prevent receiver hangs.
+ 1999/12/25 SAW */
outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
- ioaddr + SCBPointer);
- outw(RX_START, ioaddr + SCBCmd);
- }
- sp->stats.rx_errors++;
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ sp->rx_ring_state &= ~RrNoResources;
+ spin_unlock(&sp->lock);
}
/* User interrupt, Command/Tx unit interrupt or CU not active. */
if (status & 0xA400) {
- unsigned int dirty_tx = sp->dirty_tx;
-
- while (sp->cur_tx - dirty_tx > 0) {
- int entry = dirty_tx % TX_RING_SIZE;
- int status = sp->tx_ring[entry].status;
-
- if (speedo_debug > 5)
- printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
- entry, status);
- if ((status & 0x8000) == 0)
- break; /* It still hasn't been processed. */
- /* Free the original skb. */
- if (sp->tx_skbuff[entry]) {
- sp->stats.tx_packets++; /* Count only user packets. */
- dev_kfree_skb(sp->tx_skbuff[entry], FREE_WRITE);
- sp->tx_skbuff[entry] = 0;
- }
- dirty_tx++;
- }
-
-#ifndef final_version
- if (sp->cur_tx - dirty_tx > TX_RING_SIZE) {
- printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
- " full=%d.\n",
- dirty_tx, sp->cur_tx, sp->tx_full);
- dirty_tx += TX_RING_SIZE;
- }
-#endif
-
- if (sp->tx_full && dev->tbusy
- && dirty_tx > sp->cur_tx - TX_RING_SIZE + 2) {
- /* The ring is no longer full, clear tbusy. */
+ spin_lock(&sp->lock);
+ speedo_tx_buffer_gc(dev);
+ if (sp->tx_full
+ && (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) {
+ /* The ring is no longer full. */
sp->tx_full = 0;
- clear_bit(0, (void*)&dev->tbusy);
- mark_bh(NET_BH);
+ netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */
}
-
- sp->dirty_tx = dirty_tx;
+ spin_unlock(&sp->lock);
}
if (--boguscnt < 0) {
printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n",
dev->name, status);
/* Clear all interrupt sources. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
outl(0xfc00, ioaddr + SCBStatus);
break;
}
@@ -1107,150 +1644,219 @@ static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
return;
}
+static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ struct RxFD *rxf;
+ struct sk_buff *skb;
+ /* Get a fresh skbuff to replace the consumed one. */
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
+ sp->rx_skbuff[entry] = skb;
+ if (skb == NULL) {
+ sp->rx_ringp[entry] = NULL;
+ return NULL;
+ }
+ rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->tail;
+ skb->dev = dev;
+ skb_reserve(skb, sizeof(struct RxFD));
+ rxf->rx_buf_addr = virt_to_bus(skb->tail);
+ return rxf;
+}
+
+static inline void speedo_rx_link(struct net_device *dev, int entry,
+ struct RxFD *rxf)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ rxf->status = cpu_to_le32(0xC0000001); /* '1' for driver use only. */
+ rxf->link = 0; /* None yet. */
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
+ sp->last_rxf->link = virt_to_le32desc(rxf);
+ sp->last_rxf->status &= cpu_to_le32(~0xC0000000);
+ sp->last_rxf = rxf;
+}
+
+static int speedo_refill_rx_buf(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ int entry;
+ struct RxFD *rxf;
+
+ entry = sp->dirty_rx % RX_RING_SIZE;
+ if (sp->rx_skbuff[entry] == NULL) {
+ rxf = speedo_rx_alloc(dev, entry);
+ if (rxf == NULL) {
+ unsigned int forw;
+ int forw_entry;
+ if (speedo_debug > 2 || !(sp->rx_ring_state & RrOOMReported)) {
+ printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n",
+ dev->name, force);
+ speedo_show_state(dev);
+ sp->rx_ring_state |= RrOOMReported;
+ }
+ if (!force)
+ return -1; /* Better luck next time! */
+ /* Borrow an skb from one of next entries. */
+ for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++)
+ if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL)
+ break;
+ if (forw == sp->cur_rx)
+ return -1;
+ forw_entry = forw % RX_RING_SIZE;
+ sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry];
+ sp->rx_skbuff[forw_entry] = NULL;
+ rxf = sp->rx_ringp[forw_entry];
+ sp->rx_ringp[forw_entry] = NULL;
+ sp->rx_ringp[entry] = rxf;
+ }
+ } else {
+ rxf = sp->rx_ringp[entry];
+ }
+ speedo_rx_link(dev, entry, rxf);
+ sp->dirty_rx++;
+ sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */
+ return 0;
+}
+
+static void speedo_refill_rx_buffers(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+
+ /* Refill the RX ring. */
+ while ((int)(sp->cur_rx - sp->dirty_rx) > 0 &&
+ speedo_refill_rx_buf(dev, force) != -1);
+}
+
static int
-speedo_rx(struct device *dev)
+speedo_rx(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
int entry = sp->cur_rx % RX_RING_SIZE;
int status;
+ int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx;
+ int alloc_ok = 1;
if (speedo_debug > 4)
printk(KERN_DEBUG " In speedo_rx().\n");
/* If we own the next entry, it's a new packet. Send it up. */
- while ((status = sp->rx_ringp[entry]->status) & RX_COMPLETE) {
+ while (sp->rx_ringp[entry] != NULL &&
+ (status = le32_to_cpu(sp->rx_ringp[entry]->status)) & RxComplete) {
+ int pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff;
+
+ if (--rx_work_limit < 0)
+ break;
+
+ /* Check for a rare out-of-memory case: the current buffer is
+ the last buffer allocated in the RX ring. --SAW */
+ if (sp->last_rxf == sp->rx_ringp[entry]) {
+ /* Postpone the packet. It'll be reaped at an interrupt when this
+ packet is no longer the last packet in the ring. */
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: RX packet postponed!\n",
+ dev->name);
+ sp->rx_ring_state |= RrPostponed;
+ break;
+ }
if (speedo_debug > 4)
printk(KERN_DEBUG " speedo_rx() status %8.8x len %d.\n", status,
- sp->rx_ringp[entry]->count & 0x3fff);
- if (status & 0x0200) {
- printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
- "status %8.8x!\n", dev->name, status);
- } else if ( ! (status & 0x2000)) {
- /* There was a fatal error. This *should* be impossible. */
- sp->stats.rx_errors++;
- printk(KERN_ERR "%s: Anomalous event in speedo_rx(), status %8.8x.\n",
- dev->name, status);
+ pkt_len);
+ if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) {
+ if (status & RxErrTooBig)
+ printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
+ "status %8.8x!\n", dev->name, status);
+ else if (! (status & RxOK)) {
+ /* There was a fatal error. This *should* be impossible. */
+ sp->stats.rx_errors++;
+ printk(KERN_ERR "%s: Anomalous event in speedo_rx(), "
+ "status %8.8x.\n",
+ dev->name, status);
+ }
} else {
- /* Malloc up new buffer, compatible with net-2e. */
- int pkt_len = sp->rx_ringp[entry]->count & 0x3fff;
struct sk_buff *skb;
- int rx_in_place = 0;
/* Check if the packet is long enough to just accept without
copying to a properly sized skbuff. */
- if (pkt_len > rx_copybreak) {
- struct sk_buff *newskb;
- char *temp;
-
- /* Pass up the skb already on the Rx ring. */
- skb = sp->rx_skbuff[entry];
- temp = skb_put(skb, pkt_len);
- if (bus_to_virt(sp->rx_ringp[entry]->rx_buf_addr) != temp)
- printk(KERN_ERR "%s: Warning -- the skbuff addresses do not match"
- " in speedo_rx: %8.8x vs. %p / %p.\n", dev->name,
- sp->rx_ringp[entry]->rx_buf_addr, skb->head, temp);
- /* Get a fresh skbuff to replace the filled one. */
- newskb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
-
- if (newskb) {
- struct RxFD *rxf;
- rx_in_place = 1;
- sp->rx_skbuff[entry] = newskb;
- newskb->dev = dev;
- rxf = sp->rx_ringp[entry] = (struct RxFD *)newskb->tail;
- skb_reserve(newskb, sizeof(struct RxFD));
- /* Unused by i82557, consistency check only. */
- rxf->rx_buf_addr = virt_to_bus(newskb->tail);
- rxf->status = 0x00000001;
- } else /* No memory, drop the packet. */
- skb = 0;
- } else
- skb = dev_alloc_skb(pkt_len + 2);
- if (skb == NULL) {
- int i;
- printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n", dev->name);
- /* Check that at least two ring entries are free.
- If not, free one and mark stats->rx_dropped++. */
- /* ToDo: This is not correct!!!! We should count the number
- of linked-in Rx buffer to very that we have at least two
- remaining. */
- for (i = 0; i < RX_RING_SIZE; i++)
- if (! ((sp->rx_ringp[(entry+i) % RX_RING_SIZE]->status)
- & RX_COMPLETE))
- break;
-
- if (i > RX_RING_SIZE -2) {
- sp->stats.rx_dropped++;
- sp->rx_ringp[entry]->status = 0;
- sp->cur_rx++;
- }
- break;
- }
- skb->dev = dev;
- if (! rx_in_place) {
- skb_reserve(skb, 2); /* 16 byte align the data fields */
-#if defined(__i386) && notyet
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != 0) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+#if !defined(__alpha__)
/* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, bus_to_virt(sp->rx_ringp[entry]->rx_buf_addr),
- pkt_len, 0);
+ eth_copy_and_sum(skb, sp->rx_skbuff[entry]->tail, pkt_len, 0);
+ skb_put(skb, pkt_len);
#else
- memcpy(skb_put(skb, pkt_len),
- bus_to_virt(sp->rx_ringp[entry]->rx_buf_addr), pkt_len);
+ memcpy(skb_put(skb, pkt_len), sp->rx_skbuff[entry]->tail,
+ pkt_len);
#endif
+ } else {
+ /* Pass up the already-filled skbuff. */
+ skb = sp->rx_skbuff[entry];
+ if (skb == NULL) {
+ printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n",
+ dev->name);
+ break;
+ }
+ sp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ sp->rx_ringp[entry] = NULL;
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
sp->stats.rx_packets++;
+ sp->stats.rx_bytes += pkt_len;
}
-
- /* ToDo: This is better than before, but should be checked. */
- {
- struct RxFD *rxf = sp->rx_ringp[entry];
- rxf->status = 0xC0000003; /* '3' for verification only */
- rxf->link = 0; /* None yet. */
- rxf->count = 0;
- rxf->size = PKT_BUF_SZ;
- sp->last_rxf->link = virt_to_bus(rxf);
- sp->last_rxf->status &= ~0xC0000000;
- sp->last_rxf = rxf;
- entry = (++sp->cur_rx) % RX_RING_SIZE;
- }
+ entry = (++sp->cur_rx) % RX_RING_SIZE;
+ sp->rx_ring_state &= ~RrPostponed;
+ /* Refill the recently taken buffers.
+ Do it one-by-one to handle traffic bursts better. */
+ if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1)
+ alloc_ok = 0;
}
+ /* Try hard to refill the recently taken buffers. */
+ speedo_refill_rx_buffers(dev, 1);
+
sp->last_rx_time = jiffies;
+
return 0;
}
static int
-speedo_close(struct device *dev)
+speedo_close(struct net_device *dev)
{
- int ioaddr = dev->base_addr;
+ long ioaddr = dev->base_addr;
struct speedo_private *sp = (struct speedo_private *)dev->priv;
int i;
dev->start = 0;
- dev->tbusy = 1;
+ netif_stop_queue(dev);
if (speedo_debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
dev->name, inw(ioaddr + SCBStatus));
/* Shut off the media monitoring timer. */
+ start_bh_atomic();
del_timer(&sp->timer);
+ end_bh_atomic();
- /* Disable interrupts, and stop the chip's Rx process. */
- outw(INT_MASK, ioaddr + SCBCmd);
- outw(INT_MASK | RX_ABORT, ioaddr + SCBCmd);
+ /* Shutting down the chip nicely fails to disable flow control. So.. */
+ outl(PortPartialReset, ioaddr + SCBPort);
free_irq(dev->irq, dev);
- /* Free all the skbuffs in the Rx and Tx queues. */
+ /* Print a few items for debugging. */
+ if (speedo_debug > 3)
+ speedo_show_state(dev);
+
+ /* Free all the skbuffs in the Rx and Tx queues. */
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb = sp->rx_skbuff[i];
sp->rx_skbuff[i] = 0;
/* Clear the Rx descriptors. */
if (skb)
- dev_kfree_skb(skb, FREE_WRITE);
+ dev_free_skb(skb);
}
for (i = 0; i < TX_RING_SIZE; i++) {
@@ -1258,30 +1864,20 @@ speedo_close(struct device *dev)
sp->tx_skbuff[i] = 0;
/* Clear the Tx descriptors. */
if (skb)
- dev_kfree_skb(skb, FREE_WRITE);
- }
- if (sp->mc_setup_frm) {
- kfree(sp->mc_setup_frm);
- sp->mc_setup_frm_len = 0;
+ dev_free_skb(skb);
}
- /* Print a few items for debugging. */
- if (speedo_debug > 3) {
- int phy_num = sp->phy[0] & 0x1f;
- printk(KERN_DEBUG "%s:Printing Rx ring (next to receive into %d).\n",
- dev->name, sp->cur_rx);
-
- for (i = 0; i < RX_RING_SIZE; i++)
- printk(KERN_DEBUG " Rx ring entry %d %8.8x.\n",
- i, (int)sp->rx_ringp[i]->status);
-
- for (i = 0; i < 5; i++)
- printk(KERN_DEBUG " PHY index %d register %d is %4.4x.\n",
- phy_num, i, mdio_read(ioaddr, phy_num, i));
- for (i = 21; i < 26; i++)
- printk(KERN_DEBUG " PHY index %d register %d is %4.4x.\n",
- phy_num, i, mdio_read(ioaddr, phy_num, i));
+ /* Free multicast setting blocks. */
+ for (i = 0; sp->mc_setup_head != NULL; i++) {
+ struct speedo_mc_block *t;
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
}
+ sp->mc_setup_tail = NULL;
+ if (speedo_debug > 0)
+ printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i);
+
MOD_DEC_USE_COUNT;
return 0;
@@ -1300,36 +1896,42 @@ speedo_close(struct device *dev)
Oh, and incoming frames are dropped while executing dump-stats!
*/
static struct enet_statistics *
-speedo_get_stats(struct device *dev)
+speedo_get_stats(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
-
- if (sp->lstats.done_marker == 0xA007) { /* Previous dump finished */
- sp->stats.tx_aborted_errors += sp->lstats.tx_coll16_errs;
- sp->stats.tx_window_errors += sp->lstats.tx_late_colls;
- sp->stats.tx_fifo_errors += sp->lstats.tx_underruns;
- sp->stats.tx_fifo_errors += sp->lstats.tx_lost_carrier;
- /*sp->stats.tx_deferred += sp->lstats.tx_deferred;*/
- sp->stats.collisions += sp->lstats.tx_total_colls;
- sp->stats.rx_crc_errors += sp->lstats.rx_crc_errs;
- sp->stats.rx_frame_errors += sp->lstats.rx_align_errs;
- sp->stats.rx_over_errors += sp->lstats.rx_resource_errs;
- sp->stats.rx_fifo_errors += sp->lstats.rx_overrun_errs;
- sp->stats.rx_length_errors += sp->lstats.rx_runt_errs;
+ long ioaddr = dev->base_addr;
+
+ /* Update only if the previous dump finished. */
+ if (sp->lstats.done_marker == le32_to_cpu(0xA007)) {
+ sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats.tx_coll16_errs);
+ sp->stats.tx_window_errors += le32_to_cpu(sp->lstats.tx_late_colls);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats.tx_underruns);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats.tx_lost_carrier);
+ /*sp->stats.tx_deferred += le32_to_cpu(sp->lstats.tx_deferred);*/
+ sp->stats.collisions += le32_to_cpu(sp->lstats.tx_total_colls);
+ sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats.rx_crc_errs);
+ sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats.rx_align_errs);
+ sp->stats.rx_over_errors += le32_to_cpu(sp->lstats.rx_resource_errs);
+ sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats.rx_overrun_errs);
+ sp->stats.rx_length_errors += le32_to_cpu(sp->lstats.rx_runt_errs);
sp->lstats.done_marker = 0x0000;
if (dev->start) {
+ unsigned long flags;
+ /* Take a spinlock to make wait_for_cmd_done and sending the
+ command atomic. --SAW */
+ spin_lock_irqsave(&sp->lock, flags);
wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_DUMPSTATS, ioaddr + SCBCmd);
+ outb(CUDumpStats, ioaddr + SCBCmd);
+ spin_unlock_irqrestore(&sp->lock, flags);
}
}
return &sp->stats;
}
-static int speedo_ioctl(struct device *dev, struct ifreq *rq, int cmd)
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ long ioaddr = dev->base_addr;
u16 *data = (u16 *)&rq->ifr_data;
int phy = sp->phy[0] & 0x1f;
@@ -1337,12 +1939,20 @@ static int speedo_ioctl(struct device *dev, struct ifreq *rq, int cmd)
case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
data[0] = phy;
case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
+ /* FIXME: these operations need to be serialized with MDIO
+ access from the timeout handler.
+ They are currently serialized only with MDIO access from the
+ timer routine. 2000/05/09 SAW */
+ start_bh_atomic();
data[3] = mdio_read(ioaddr, data[0], data[1]);
+ end_bh_atomic();
return 0;
case SIOCDEVPRIVATE+2: /* Write the specified MII register */
- if (!suser())
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ start_bh_atomic();
mdio_write(ioaddr, data[0], data[1], data[2]);
+ end_bh_atomic();
return 0;
default:
return -EOPNOTSUPP;
@@ -1358,11 +1968,11 @@ static int speedo_ioctl(struct device *dev, struct ifreq *rq, int cmd)
loaded the link -- we convert the current command block, normally a Tx
command, into a no-op and link it to the new command.
*/
-static void
-set_rx_mode(struct device *dev)
+static void set_rx_mode(struct net_device *dev)
{
struct speedo_private *sp = (struct speedo_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ long ioaddr = dev->base_addr;
+ struct descriptor *last_cmd;
char new_rx_mode;
unsigned long flags;
int entry, i;
@@ -1375,68 +1985,75 @@ set_rx_mode(struct device *dev)
} else
new_rx_mode = 0;
- if (sp->cur_tx - sp->dirty_tx >= TX_RING_SIZE - 1) {
- /* The Tx ring is full -- don't add anything! Presumably the new mode
- is in config_cmd_data and will be added anyway. */
+ if (speedo_debug > 3)
+ printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name,
+ sp->rx_mode, new_rx_mode);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) {
+ /* The Tx ring is full -- don't add anything! Hope the mode will be
+ * set again later. */
sp->rx_mode = -1;
return;
}
if (new_rx_mode != sp->rx_mode) {
- /* We must change the configuration. Construct a CmdConfig frame. */
- memcpy(sp->config_cmd_data, basic_config_cmd,sizeof(basic_config_cmd));
- sp->config_cmd_data[1] = (txfifo << 4) | rxfifo;
- sp->config_cmd_data[4] = rxdmacount;
- sp->config_cmd_data[5] = txdmacount + 0x80;
- sp->config_cmd_data[15] = (new_rx_mode & 2) ? 0x49 : 0x48;
- sp->config_cmd_data[19] = sp->full_duplex ? 0xC0 : 0x80;
- sp->config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
+ u8 *config_cmd_data;
+
+ spin_lock_irqsave(&sp->lock, flags);
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ sp->tx_skbuff[entry] = 0; /* Redundant. */
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure);
+ sp->tx_ring[entry].link =
+ virt_to_le32desc(&sp->tx_ring[(entry + 1) % TX_RING_SIZE]);
+ config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr;
+ /* Construct a full CmdConfig frame. */
+ memcpy(config_cmd_data, i82558_config_cmd, sizeof(i82558_config_cmd));
+ config_cmd_data[1] = (txfifo << 4) | rxfifo;
+ config_cmd_data[4] = rxdmacount;
+ config_cmd_data[5] = txdmacount + 0x80;
+ config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0;
+ /* 0x80 doesn't disable FC 0x84 does.
+ Disable Flow control since we are not ACK-ing any FC interrupts
+ for now. --Dragan */
+ config_cmd_data[19] = 0x84;
+ config_cmd_data[19] |= sp->full_duplex ? 0x40 : 0;
+ config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
if (sp->phy[0] & 0x8000) { /* Use the AUI port instead. */
- sp->config_cmd_data[15] |= 0x80;
- sp->config_cmd_data[8] = 0;
+ config_cmd_data[15] |= 0x80;
+ config_cmd_data[8] = 0;
}
- save_flags(flags);
- cli();
- /* Fill the "real" tx_ring frame with a no-op and point it to us. */
- entry = sp->cur_tx++ % TX_RING_SIZE;
- sp->tx_skbuff[entry] = 0; /* Nothing to free. */
- sp->tx_ring[entry].status = CmdNOp << 16;
- sp->tx_ring[entry].link = virt_to_bus(&sp->config_cmd);
- sp->config_cmd.status = 0;
- sp->config_cmd.command = CmdSuspend | CmdConfigure;
- sp->config_cmd.link =
- virt_to_bus(&(sp->tx_ring[sp->cur_tx % TX_RING_SIZE]));
- sp->last_cmd->command &= ~CmdSuspend;
- /* Immediately trigger the command unit resume. */
+ /* Trigger the command unit resume. */
wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_RESUME, ioaddr + SCBCmd);
- sp->last_cmd = &sp->config_cmd;
- restore_flags(flags);
- if (speedo_debug > 5) {
- int i;
- printk(KERN_DEBUG " CmdConfig frame in entry %d.\n", entry);
- for(i = 0; i < 32; i++)
- printk(" %2.2x", ((unsigned char *)&sp->config_cmd)[i]);
- printk(".\n");
+ clear_suspend(last_cmd);
+ outb(CUResume, ioaddr + SCBCmd);
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
}
+ spin_unlock_irqrestore(&sp->lock, flags);
}
- if (new_rx_mode == 0 && dev->mc_count < 3) {
- /* The simple case of 0-2 multicast list entries occurs often, and
+ if (new_rx_mode == 0 && dev->mc_count < 4) {
+ /* The simple case of 0-3 multicast list entries occurs often, and
fits within one tx_ring[] entry. */
- u16 *setup_params, *eaddrs;
struct dev_mc_list *mclist;
+ u16 *setup_params, *eaddrs;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&sp->lock, flags);
entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
sp->tx_skbuff[entry] = 0;
- sp->tx_ring[entry].status = (CmdSuspend | CmdMulticastList) << 16;
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList);
sp->tx_ring[entry].link =
- virt_to_bus(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
+ virt_to_le32desc(&sp->tx_ring[(entry + 1) % TX_RING_SIZE]);
sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */
setup_params = (u16 *)&sp->tx_ring[entry].tx_desc_addr;
- *setup_params++ = dev->mc_count*6;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
/* Fill in the multicast addresses. */
for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
i++, mclist = mclist->next) {
@@ -1446,45 +2063,43 @@ set_rx_mode(struct device *dev)
*setup_params++ = *eaddrs++;
}
- sp->last_cmd->command &= ~CmdSuspend;
- /* Immediately trigger the command unit resume. */
wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_RESUME, ioaddr + SCBCmd);
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
- restore_flags(flags);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ outb(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
} else if (new_rx_mode == 0) {
- /* This does not work correctly, but why not? */
struct dev_mc_list *mclist;
- u16 *eaddrs;
- struct descriptor *mc_setup_frm = sp->mc_setup_frm;
- u16 *setup_params;
+ u16 *setup_params, *eaddrs;
+ struct speedo_mc_block *mc_blk;
+ struct descriptor *mc_setup_frm;
int i;
- if (sp->mc_setup_frm_len < 10 + dev->mc_count*6
- || sp->mc_setup_frm == NULL) {
- /* Allocate a new frame, 10bytes + addrs, with a few
- extra entries for growth. */
- if (sp->mc_setup_frm)
- kfree(sp->mc_setup_frm);
- sp->mc_setup_frm_len = 10 + dev->mc_count*6 + 24;
- sp->mc_setup_frm = kmalloc(sp->mc_setup_frm_len, GFP_ATOMIC);
- if (sp->mc_setup_frm == NULL) {
- printk(KERN_ERR "%s: Failed to allocate a setup frame.\n", dev->name);
- sp->rx_mode = -1; /* We failed, try again. */
- return;
- }
+ mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6,
+ GFP_ATOMIC);
+ if (mc_blk == NULL) {
+ printk(KERN_ERR "%s: Failed to allocate a setup frame.\n",
+ dev->name);
+ sp->rx_mode = -1; /* We failed, try again. */
+ return;
}
- mc_setup_frm = sp->mc_setup_frm;
- /* Construct the new setup frame. */
+ mc_blk->next = NULL;
+ mc_setup_frm = &mc_blk->frame;
+
+ /* Fill the setup frame. */
if (speedo_debug > 1)
- printk(KERN_DEBUG "%s: Constructing a setup frame at %p, "
- "%d bytes.\n",
- dev->name, sp->mc_setup_frm, sp->mc_setup_frm_len);
- mc_setup_frm->status = 0;
- mc_setup_frm->command = CmdSuspend | CmdIntr | CmdMulticastList;
+ printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n",
+ dev->name, mc_setup_frm);
+ mc_setup_frm->cmd_status =
+ cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList);
/* Link set below. */
- setup_params = (u16 *)mc_setup_frm->params;
- *setup_params++ = dev->mc_count*6;
+ setup_params = (u16 *)&mc_setup_frm->params;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
/* Fill in the multicast addresses. */
for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
i++, mclist = mclist->next) {
@@ -1495,32 +2110,42 @@ set_rx_mode(struct device *dev)
}
/* Disable interrupts while playing with the Tx Cmd list. */
- save_flags(flags);
- cli();
- entry = sp->cur_tx++ % TX_RING_SIZE;
+ spin_lock_irqsave(&sp->lock, flags);
- if (speedo_debug > 5)
- printk(" CmdMCSetup frame length %d in entry %d.\n",
- dev->mc_count, entry);
+ if (sp->mc_setup_tail)
+ sp->mc_setup_tail->next = mc_blk;
+ else
+ sp->mc_setup_head = mc_blk;
+ sp->mc_setup_tail = mc_blk;
+ mc_blk->tx = sp->cur_tx;
+
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = mc_setup_frm;
/* Change the command to a NoOp, pointing to the CmdMulti command. */
sp->tx_skbuff[entry] = 0;
- sp->tx_ring[entry].status = CmdNOp << 16;
- sp->tx_ring[entry].link = virt_to_bus(mc_setup_frm);
+ sp->tx_ring[entry].status = cpu_to_le32(CmdNOp);
+ sp->tx_ring[entry].link = virt_to_le32desc(mc_setup_frm);
/* Set the link in the setup frame. */
mc_setup_frm->link =
- virt_to_bus(&(sp->tx_ring[sp->cur_tx % TX_RING_SIZE]));
+ virt_to_le32desc(&(sp->tx_ring[(entry+1) % TX_RING_SIZE]));
- sp->last_cmd->command &= ~CmdSuspend;
- /* Immediately trigger the command unit resume. */
wait_for_cmd_done(ioaddr + SCBCmd);
- outw(CU_RESUME, ioaddr + SCBCmd);
- sp->last_cmd = mc_setup_frm;
- restore_flags(flags);
- if (speedo_debug > 1)
- printk(KERN_DEBUG "%s: Last command at %p is %4.4x.\n",
- dev->name, sp->last_cmd, sp->last_cmd->command);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ outb(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+
+ if (speedo_debug > 5)
+ printk(" CmdMCSetup frame length %d in entry %d.\n",
+ dev->mc_count, entry);
}
sp->rx_mode = new_rx_mode;
@@ -1528,41 +2153,54 @@ set_rx_mode(struct device *dev)
#ifdef MODULE
-int
-init_module(void)
+int init_module(void)
{
int cards_found;
+ if (debug >= 0 && speedo_debug != debug)
+ printk(KERN_INFO "eepro100.c: Debug level is %d.\n", debug);
if (debug >= 0)
speedo_debug = debug;
+ /* Always emit the version message. */
if (speedo_debug)
printk(KERN_INFO "%s", version);
- root_speedo_dev = NULL;
- cards_found = eepro100_init(NULL);
- return cards_found ? 0 : -ENODEV;
+ cards_found = eepro100_init();
+ if (cards_found <= 0) {
+ printk(KERN_INFO "eepro100: No cards found, driver not installed.\n");
+ return -ENODEV;
+ }
+ return 0;
}
void
cleanup_module(void)
{
- struct device *next_dev;
+ struct net_device *next_dev;
/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
while (root_speedo_dev) {
- next_dev = ((struct speedo_private *)root_speedo_dev->priv)->next_module;
+ struct speedo_private *sp = (void *)root_speedo_dev->priv;
unregister_netdev(root_speedo_dev);
release_region(root_speedo_dev->base_addr, SPEEDO3_TOTAL_SIZE);
+#ifndef USE_IO
+ iounmap((char *)root_speedo_dev->base_addr);
+#endif
+ next_dev = sp->next_module;
+ if (sp->priv_addr)
+ kfree(sp->priv_addr);
kfree(root_speedo_dev);
root_speedo_dev = next_dev;
}
}
+
#else /* not MODULE */
-int eepro100_probe(struct device *dev)
+
+int eepro100_probe(void)
{
int cards_found = 0;
- cards_found = eepro100_init(dev);
+ cards_found = eepro100_init();
if (speedo_debug > 0 && cards_found)
printk(version);