1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 460 insertions, 0 deletions

diff --git a/linux/src/drivers/scsi/in2000.h b/linux/src/drivers/scsi/in2000.h
new file mode 100644
index 0000000..2a6ad29
--- /dev/null
+++ b/linux/src/drivers/scsi/in2000.h
@@ -0,0 +1,460 @@
+/*
+ *    in2000.h -  Linux device driver definitions for the
+ *                Always IN2000 ISA SCSI card.
+ *
+ *    IMPORTANT: This file is for version 1.33 - 26/Aug/1998
+ *
+ * Copyright (c) 1996 John Shifflett, GeoLog Consulting
+ *    john@geolog.com
+ *    jshiffle@netcom.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef IN2000_H
+#define IN2000_H
+
+#include <asm/io.h>
+
+#define PROC_INTERFACE     /* add code for /proc/scsi/in2000/xxx interface */
+#ifdef  PROC_INTERFACE
+#define PROC_STATISTICS    /* add code for keeping various real time stats */
+#endif
+
+#define SYNC_DEBUG         /* extra info on sync negotiation printed */
+#define DEBUGGING_ON       /* enable command-line debugging bitmask */
+#define DEBUG_DEFAULTS 0   /* default bitmask - change from command-line */
+
+#define FAST_READ_IO       /* No problems with these on my machine */
+#define FAST_WRITE_IO
+
+#ifdef DEBUGGING_ON
+#define DB(f,a) if (hostdata->args & (f)) a;
+#define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */
+#else
+#define DB(f,a)
+#define CHECK_NULL(p,s)
+#endif
+
+#define uchar unsigned char
+
+#define read1_io(a)     (inb(hostdata->io_base+(a)))
+#define read2_io(a)     (inw(hostdata->io_base+(a)))
+#define write1_io(b,a)  (outb((b),hostdata->io_base+(a)))
+#define write2_io(w,a)  (outw((w),hostdata->io_base+(a)))
+
+/* These inline assembly defines are derived from a patch
+ * sent to me by Bill Earnest. He's done a lot of very
+ * valuable thinking, testing, and coding during his effort
+ * to squeeze more speed out of this driver. I really think
+ * that we are doing IO at close to the maximum now with
+ * the fifo. (And yes, insw uses 'edi' while outsw uses
+ * 'esi'. Thanks Bill!)
+ */
+
+#define FAST_READ2_IO()    \
+   __asm__ __volatile__ ("\n \
+   cld                    \n \
+   orl %%ecx, %%ecx       \n \
+   jz 1f                  \n \
+   rep                    \n \
+   insw %%dx              \n \
+1: "                       \
+   : "=D" (sp)                   /* output */   \
+   : "d" (f), "D" (sp), "c" (i)  /* input */    \
+   : "edx", "ecx", "edi" )       /* trashed */
+
+#define FAST_WRITE2_IO()   \
+   __asm__ __volatile__ ("\n \
+   cld                    \n \
+   orl %%ecx, %%ecx       \n \
+   jz 1f                  \n \
+   rep                    \n \
+   outsw %%dx             \n \
+1: "                       \
+   : "=S" (sp)                   /* output */   \
+   : "d" (f), "S" (sp), "c" (i)  /* input */    \
+   : "edx", "ecx", "esi" )       /* trashed */
+
+
+/* IN2000 io_port offsets */
+#define IO_WD_ASR       0x00     /* R - 3393 auxstat reg */
+#define     ASR_INT        0x80
+#define     ASR_LCI        0x40
+#define     ASR_BSY        0x20
+#define     ASR_CIP        0x10
+#define     ASR_PE         0x02
+#define     ASR_DBR        0x01
+#define IO_WD_ADDR      0x00     /* W - 3393 address reg */
+#define IO_WD_DATA      0x01     /* R/W - rest of 3393 regs */
+#define IO_FIFO         0x02     /* R/W - in2000 dual-port fifo (16 bits) */
+#define IN2000_FIFO_SIZE   2048  /*    fifo capacity in bytes */
+#define IO_CARD_RESET   0x03     /* W - in2000 start master reset */
+#define IO_FIFO_COUNT   0x04     /* R - in2000 fifo counter */
+#define IO_FIFO_WRITE   0x05     /* W - clear fifo counter, start write */
+#define IO_FIFO_READ    0x07     /* W - start fifo read */
+#define IO_LED_OFF      0x08     /* W - turn off in2000 activity LED */
+#define IO_SWITCHES     0x08     /* R - read in2000 dip switch */
+#define     SW_ADDR0       0x01  /*    bit 0 = bit 0 of index to io addr */
+#define     SW_ADDR1       0x02  /*    bit 1 = bit 1 of index io addr */
+#define     SW_DISINT      0x04  /*    bit 2 true if ints disabled */
+#define     SW_INT0        0x08  /*    bit 3 = bit 0 of index to interrupt */
+#define     SW_INT1        0x10  /*    bit 4 = bit 1 of index to interrupt */
+#define     SW_INT_SHIFT   3     /*    shift right this amount to right justify int bits */
+#define     SW_SYNC_DOS5   0x20  /*    bit 5 used by Always BIOS */
+#define     SW_FLOPPY      0x40  /*    bit 6 true if floppy enabled */
+#define     SW_BIT7        0x80  /*    bit 7 hardwired true (ground) */
+#define IO_LED_ON       0x09     /* W - turn on in2000 activity LED */
+#define IO_HARDWARE     0x0a     /* R - read in2000 hardware rev, stop reset */
+#define IO_INTR_MASK    0x0c     /* W - in2000 interrupt mask reg */
+#define     IMASK_WD       0x01  /*    WD33c93 interrupt mask */
+#define     IMASK_FIFO     0x02  /*    FIFO interrupt mask */
+
+/* wd register names */
+#define WD_OWN_ID    0x00
+#define WD_CONTROL   0x01
+#define WD_TIMEOUT_PERIOD  0x02
+#define WD_CDB_1     0x03
+#define WD_CDB_2     0x04
+#define WD_CDB_3     0x05
+#define WD_CDB_4     0x06
+#define WD_CDB_5     0x07
+#define WD_CDB_6     0x08
+#define WD_CDB_7     0x09
+#define WD_CDB_8     0x0a
+#define WD_CDB_9     0x0b
+#define WD_CDB_10    0x0c
+#define WD_CDB_11    0x0d
+#define WD_CDB_12    0x0e
+#define WD_TARGET_LUN      0x0f
+#define WD_COMMAND_PHASE   0x10
+#define WD_SYNCHRONOUS_TRANSFER  0x11
+#define WD_TRANSFER_COUNT_MSB 0x12
+#define WD_TRANSFER_COUNT  0x13
+#define WD_TRANSFER_COUNT_LSB 0x14
+#define WD_DESTINATION_ID  0x15
+#define WD_SOURCE_ID    0x16
+#define WD_SCSI_STATUS     0x17
+#define WD_COMMAND      0x18
+#define WD_DATA      0x19
+#define WD_QUEUE_TAG    0x1a
+#define WD_AUXILIARY_STATUS   0x1f
+
+/* WD commands */
+#define WD_CMD_RESET    0x00
+#define WD_CMD_ABORT    0x01
+#define WD_CMD_ASSERT_ATN  0x02
+#define WD_CMD_NEGATE_ACK  0x03
+#define WD_CMD_DISCONNECT  0x04
+#define WD_CMD_RESELECT    0x05
+#define WD_CMD_SEL_ATN     0x06
+#define WD_CMD_SEL      0x07
+#define WD_CMD_SEL_ATN_XFER   0x08
+#define WD_CMD_SEL_XFER    0x09
+#define WD_CMD_RESEL_RECEIVE  0x0a
+#define WD_CMD_RESEL_SEND  0x0b
+#define WD_CMD_WAIT_SEL_RECEIVE 0x0c
+#define WD_CMD_TRANS_ADDR  0x18
+#define WD_CMD_TRANS_INFO  0x20
+#define WD_CMD_TRANSFER_PAD   0x21
+#define WD_CMD_SBT_MODE    0x80
+
+/* SCSI Bus Phases */
+#define PHS_DATA_OUT    0x00
+#define PHS_DATA_IN     0x01
+#define PHS_COMMAND     0x02
+#define PHS_STATUS      0x03
+#define PHS_MESS_OUT    0x06
+#define PHS_MESS_IN     0x07
+
+/* Command Status Register definitions */
+
+  /* reset state interrupts */
+#define CSR_RESET    0x00
+#define CSR_RESET_AF    0x01
+
+  /* successful completion interrupts */
+#define CSR_RESELECT    0x10
+#define CSR_SELECT      0x11
+#define CSR_SEL_XFER_DONE  0x16
+#define CSR_XFER_DONE      0x18
+
+  /* paused or aborted interrupts */
+#define CSR_MSGIN    0x20
+#define CSR_SDP         0x21
+#define CSR_SEL_ABORT      0x22
+#define CSR_RESEL_ABORT    0x25
+#define CSR_RESEL_ABORT_AM 0x27
+#define CSR_ABORT    0x28
+
+  /* terminated interrupts */
+#define CSR_INVALID     0x40
+#define CSR_UNEXP_DISC     0x41
+#define CSR_TIMEOUT     0x42
+#define CSR_PARITY      0x43
+#define CSR_PARITY_ATN     0x44
+#define CSR_BAD_STATUS     0x45
+#define CSR_UNEXP    0x48
+
+  /* service required interrupts */
+#define CSR_RESEL    0x80
+#define CSR_RESEL_AM    0x81
+#define CSR_DISC     0x85
+#define CSR_SRV_REQ     0x88
+
+   /* Own ID/CDB Size register */
+#define OWNID_EAF    0x08
+#define OWNID_EHP    0x10
+#define OWNID_RAF    0x20
+#define OWNID_FS_8   0x00
+#define OWNID_FS_12  0x40
+#define OWNID_FS_16  0x80
+
+   /* Control register */
+#define CTRL_HSP     0x01
+#define CTRL_HA      0x02
+#define CTRL_IDI     0x04
+#define CTRL_EDI     0x08
+#define CTRL_HHP     0x10
+#define CTRL_POLLED  0x00
+#define CTRL_BURST   0x20
+#define CTRL_BUS     0x40
+#define CTRL_DMA     0x80
+
+   /* Timeout Period register */
+#define TIMEOUT_PERIOD_VALUE  20    /* results in 200 ms. */
+
+   /* Synchronous Transfer Register */
+#define STR_FSS      0x80
+
+   /* Destination ID register */
+#define DSTID_DPD    0x40
+#define DATA_OUT_DIR 0
+#define DATA_IN_DIR  1
+#define DSTID_SCC    0x80
+
+   /* Source ID register */
+#define SRCID_MASK   0x07
+#define SRCID_SIV    0x08
+#define SRCID_DSP    0x20
+#define SRCID_ES     0x40
+#define SRCID_ER     0x80
+
+
+
+#define ILLEGAL_STATUS_BYTE   0xff
+
+
+#define DEFAULT_SX_PER     500   /* (ns) fairly safe */
+#define DEFAULT_SX_OFF     0     /* aka async */
+
+#define OPTIMUM_SX_PER     252   /* (ns) best we can do (mult-of-4) */
+#define OPTIMUM_SX_OFF     12    /* size of in2000 fifo */
+
+struct sx_period {
+   unsigned int   period_ns;
+   uchar          reg_value;
+   };
+
+
+struct IN2000_hostdata {
+    struct Scsi_Host *next;
+    uchar            chip;             /* what kind of wd33c93 chip? */
+    uchar            microcode;        /* microcode rev if 'B' */
+    unsigned short   io_base;          /* IO port base */
+    unsigned int     dip_switch;       /* dip switch settings */
+    unsigned int     hrev;             /* hardware revision of card */
+    volatile uchar   busy[8];          /* index = target, bit = lun */
+    volatile Scsi_Cmnd *input_Q;       /* commands waiting to be started */
+    volatile Scsi_Cmnd *selecting;     /* trying to select this command */
+    volatile Scsi_Cmnd *connected;     /* currently connected command */
+    volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */
+    uchar            state;            /* what we are currently doing */
+    uchar            fifo;             /* what the FIFO is up to */
+    uchar            level2;           /* extent to which Level-2 commands are used */
+    uchar            disconnect;       /* disconnect/reselect policy */
+    unsigned int     args;             /* set from command-line argument */
+    uchar            incoming_msg[8];  /* filled during message_in phase */
+    int              incoming_ptr;     /* mainly used with EXTENDED messages */
+    uchar            outgoing_msg[8];  /* send this during next message_out */
+    int              outgoing_len;     /* length of outgoing message */
+    unsigned int     default_sx_per;   /* default transfer period for SCSI bus */
+    uchar            sync_xfer[8];     /* sync_xfer reg settings per target */
+    uchar            sync_stat[8];     /* status of sync negotiation per target */
+    uchar            sync_off;         /* bit mask: don't use sync with these targets */
+#ifdef PROC_INTERFACE
+    uchar            proc;             /* bit mask: what's in proc output */
+#ifdef PROC_STATISTICS
+    unsigned long    cmd_cnt[8];       /* # of commands issued per target */
+    unsigned long    int_cnt;          /* # of interrupts serviced */
+    unsigned long    disc_allowed_cnt[8]; /* # of disconnects allowed per target */
+    unsigned long    disc_done_cnt[8]; /* # of disconnects done per target*/
+#endif
+#endif
+    };
+
+
+/* defines for hostdata->chip */
+
+#define C_WD33C93       0
+#define C_WD33C93A      1
+#define C_WD33C93B      2
+#define C_UNKNOWN_CHIP  100
+
+/* defines for hostdata->state */
+
+#define S_UNCONNECTED         0
+#define S_SELECTING           1
+#define S_RUNNING_LEVEL2      2
+#define S_CONNECTED           3
+#define S_PRE_TMP_DISC        4
+#define S_PRE_CMP_DISC        5
+
+/* defines for hostdata->fifo */
+
+#define FI_FIFO_UNUSED        0
+#define FI_FIFO_READING       1
+#define FI_FIFO_WRITING       2
+
+/* defines for hostdata->level2 */
+/* NOTE: only the first 3 are trustworthy at this point -
+ * having trouble when more than 1 device is reading/writing
+ * at the same time...
+ */
+
+#define L2_NONE      0  /* no combination commands - we get lots of ints */
+#define L2_SELECT    1  /* start with SEL_ATN_XFER, but never resume it */
+#define L2_BASIC     2  /* resume after STATUS ints & RDP messages */
+#define L2_DATA      3  /* resume after DATA_IN/OUT ints */
+#define L2_MOST      4  /* resume after anything except a RESELECT int */
+#define L2_RESELECT  5  /* resume after everything, including RESELECT ints */
+#define L2_ALL       6  /* always resume */
+
+/* defines for hostdata->disconnect */
+
+#define DIS_NEVER    0
+#define DIS_ADAPTIVE 1
+#define DIS_ALWAYS   2
+
+/* defines for hostdata->args */
+
+#define DB_TEST               1<<0
+#define DB_FIFO               1<<1
+#define DB_QUEUE_COMMAND      1<<2
+#define DB_EXECUTE            1<<3
+#define DB_INTR               1<<4
+#define DB_TRANSFER           1<<5
+#define DB_MASK               0x3f
+
+#define A_NO_SCSI_RESET       1<<15
+
+
+/* defines for hostdata->sync_xfer[] */
+
+#define SS_UNSET     0
+#define SS_FIRST     1
+#define SS_WAITING   2
+#define SS_SET       3
+
+/* defines for hostdata->proc */
+
+#define PR_VERSION   1<<0
+#define PR_INFO      1<<1
+#define PR_STATISTICS 1<<2
+#define PR_CONNECTED 1<<3
+#define PR_INPUTQ    1<<4
+#define PR_DISCQ     1<<5
+#define PR_TEST      1<<6
+#define PR_STOP      1<<7
+
+
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < 0x020100   /* 2.0.xx */
+# define in2000__INITFUNC(function) function
+# define in2000__INIT
+# define in2000__INITDATA
+# define CLISPIN_LOCK(flags)   do { save_flags(flags); cli(); } while(0)
+# define CLISPIN_UNLOCK(flags) restore_flags(flags)
+#else                               /* 2.1.xxx */
+# include <linux/init.h>
+# include <asm/spinlock.h>
+# define in2000__INITFUNC(function) __initfunc(function)
+# define in2000__INIT __init
+# define in2000__INITDATA __initdata
+# define CLISPIN_LOCK(flags)   spin_lock_irqsave(&io_request_lock, flags)
+# define CLISPIN_UNLOCK(flags) spin_unlock_irqrestore(&io_request_lock, flags)
+#endif
+
+
+int in2000_detect(Scsi_Host_Template *) in2000__INIT;
+int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int in2000_abort(Scsi_Cmnd *);
+void in2000_setup(char *, int *) in2000__INIT;
+int in2000_proc_info(char *, char **, off_t, int, int, int);
+struct proc_dir_entry proc_scsi_in2000;
+int in2000_biosparam(struct scsi_disk *, kdev_t, int *);
+int in2000_reset(Scsi_Cmnd *, unsigned int);
+
+
+#define IN2000_CAN_Q    16
+#define IN2000_SG       SG_ALL
+#define IN2000_CPL      2
+#define IN2000_HOST_ID  7
+
+#if LINUX_VERSION_CODE < 0x020100   /* 2.0.xx */
+
+#define IN2000 {  NULL,                /* link pointer for modules */ \
+                  NULL,                /* usage_count for modules */ \
+                  &proc_scsi_in2000,   /* pointer to /proc/scsi directory entry */ \
+                  in2000_proc_info,    /* pointer to proc info function */ \
+                  "Always IN2000",     /* device name */ \
+                  in2000_detect,       /* returns number of in2000's found */ \
+                  NULL,                /* optional unload function for modules */ \
+                  NULL,                /* optional misc info function */ \
+                  NULL,                /* send scsi command, wait for completion */ \
+                  in2000_queuecommand, /* queue scsi command, don't wait */ \
+                  in2000_abort,        /* abort current command */ \
+                  in2000_reset,        /* reset scsi bus */ \
+                  NULL,                /* slave_attach - unused */ \
+                  in2000_biosparam,    /* figures out BIOS parameters for lilo, etc */ \
+                  IN2000_CAN_Q,        /* max commands we can queue up */ \
+                  IN2000_HOST_ID,      /* host-adapter scsi id */ \
+                  IN2000_SG,           /* scatter-gather table size */ \
+                  IN2000_CPL,          /* commands per lun */ \
+                  0,                   /* board counter */ \
+                  0,                   /* unchecked dma */ \
+                  DISABLE_CLUSTERING \
+               }
+
+#else       /* 2.1.xxx */
+
+#define IN2000 {  proc_dir:        &proc_scsi_in2000,   /* pointer to /proc/scsi directory entry */ \
+                  proc_info:       in2000_proc_info,    /* pointer to proc info function */ \
+                  name:            "Always IN2000",     /* device name */ \
+                  detect:          in2000_detect,       /* returns number of in2000's found */ \
+                  queuecommand:    in2000_queuecommand, /* queue scsi command, don't wait */ \
+                  abort:           in2000_abort,        /* abort current command */ \
+                  reset:           in2000_reset,        /* reset scsi bus */ \
+                  bios_param:      in2000_biosparam,    /* figures out BIOS parameters for lilo, etc */ \
+                  can_queue:       IN2000_CAN_Q,        /* max commands we can queue up */ \
+                  this_id:         IN2000_HOST_ID,      /* host-adapter scsi id */ \
+                  sg_tablesize:    IN2000_SG,           /* scatter-gather table size */ \
+                  cmd_per_lun:     IN2000_CPL,          /* commands per lun */ \
+                  use_clustering:  DISABLE_CLUSTERING,  /* ENABLE_CLUSTERING may speed things up */ \
+                  use_new_eh_code: 0                    /* new error code - not using it yet */ \
+                }
+
+#endif
+
+
+#endif /* IN2000_H */