diff options
author | Thomas Bushnell <thomas@gnu.org> | 1999-04-26 05:44:30 +0000 |
---|---|---|
committer | Thomas Bushnell <thomas@gnu.org> | 1999-04-26 05:44:30 +0000 |
commit | 063bab9f9919bd7460386ed11a15e7f67673077e (patch) | |
tree | ead73696a2296ce80fd8374f18258eb255b29ef8 /linux/dev/drivers/scsi/scsi.c | |
parent | 1007688e7015f5e8d37743353ca153391120feb3 (diff) |
1999-04-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* linux/dev/drivers/block/ide.c (init_hwif_data) [MACH]: Print Mach
device name instead of Linux one.
* linux/dev/drivers/block/genhd.c (disk_name): Likewise.
* linux/dev/drivers/scsi/sd.c (sd_init_onedisk): Likewise.
(sd_detect): Likewise.
* linux/dev/drivers/sr.c (sr_detect): Likewise.
(get_sectorsize): Likewise.
1999-02-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* device/kmsg.c (kmsginit): Add a missing semicolon.
(kmsggetstat): Fix typos,
DEV_GET_DEVICE_SIZE -> DEV_GET_SIZE_DEVICE_SIZE and
DEV_GET_RECORD_SIZE -> DEV_GET_SIZE_RECORD_SIZE.
(kmsg_putchar): Fix a typo kmsg_done_init -> kmsg_init_done.
* linux/dev/glue/block.c (device_get_status): Allocate a hd_geometry
on the stack.
* linux/dev/drivers/block/ide.c: New file.
* linux/dev/drivers/scsi/sd_ioctl.c: New file.
Diffstat (limited to 'linux/dev/drivers/scsi/scsi.c')
-rw-r--r-- | linux/dev/drivers/scsi/scsi.c | 3585 |
1 files changed, 3585 insertions, 0 deletions
diff --git a/linux/dev/drivers/scsi/scsi.c b/linux/dev/drivers/scsi/scsi.c new file mode 100644 index 0000000..4a821c0 --- /dev/null +++ b/linux/dev/drivers/scsi/scsi.c @@ -0,0 +1,3585 @@ +/* + * scsi.c Copyright (C) 1992 Drew Eckhardt + * Copyright (C) 1993, 1994, 1995 Eric Youngdale + * + * generic mid-level SCSI driver + * Initial versions: Drew Eckhardt + * Subsequent revisions: Eric Youngdale + * + * <drew@colorado.edu> + * + * Bug correction thanks go to : + * Rik Faith <faith@cs.unc.edu> + * Tommy Thorn <tthorn> + * Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de> + * + * Modified by Eric Youngdale eric@aib.com to + * add scatter-gather, multiple outstanding request, and other + * enhancements. + * + * Native multichannel, wide scsi, /proc/scsi and hot plugging + * support added by Michael Neuffer <mike@i-connect.net> + * + * Added request_module("scsi_hostadapter") for kerneld: + * (Put an "alias scsi_hostadapter your_hostadapter" in /etc/conf.modules) + * Bjorn Ekwall <bj0rn@blox.se> + * + * Major improvements to the timeout, abort, and reset processing, + * as well as performance modifications for large queue depths by + * Leonard N. Zubkoff <lnz@dandelion.com> + */ + +/* + * Don't import our own symbols, as this would severely mess up our + * symbol tables. + */ +#define _SCSI_SYMS_VER_ + +#include <linux/config.h> +#include <linux/module.h> + +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/string.h> +#include <linux/malloc.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/stat.h> +#include <linux/blk.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/dma.h> + +#include "scsi.h" +#include "hosts.h" +#include "constants.h" + +#ifdef CONFIG_KERNELD +#include <linux/kerneld.h> +#endif + +#undef USE_STATIC_SCSI_MEMORY + +/* +static const char RCSid[] = "$Header: cvs/gnumach/linux/dev/drivers/scsi/Attic/scsi.c,v 1.1 1999/04/26 05:44:26 tb Exp $"; +*/ + + +/* Command groups 3 and 4 are reserved and should never be used. */ +const unsigned char scsi_command_size[8] = { 6, 10, 10, 12, 12, 12, 10, 10 }; + +#define INTERNAL_ERROR (panic ("Internal error in file %s, line %d.\n", __FILE__, __LINE__)) + +/* + * PAGE_SIZE must be a multiple of the sector size (512). True + * for all reasonably recent architectures (even the VAX...). + */ +#define SECTOR_SIZE 512 +#define SECTORS_PER_PAGE (PAGE_SIZE/SECTOR_SIZE) + +#if SECTORS_PER_PAGE <= 8 + typedef unsigned char FreeSectorBitmap; +#elif SECTORS_PER_PAGE <= 32 + typedef unsigned int FreeSectorBitmap; +#else +# error You lose. +#endif + +static void scsi_done (Scsi_Cmnd *SCpnt); +static int update_timeout (Scsi_Cmnd *, int); +static void print_inquiry(unsigned char *data); +static void scsi_times_out (Scsi_Cmnd * SCpnt); +static int scan_scsis_single (int channel,int dev,int lun,int * max_scsi_dev , + int * sparse_lun, Scsi_Device ** SDpnt, Scsi_Cmnd * SCpnt, + struct Scsi_Host *shpnt, char * scsi_result); +void scsi_build_commandblocks(Scsi_Device * SDpnt); + +#ifdef CONFIG_MODULES +extern struct symbol_table scsi_symbol_table; +#endif + +static FreeSectorBitmap * dma_malloc_freelist = NULL; +static int scsi_need_isa_bounce_buffers; +static unsigned int dma_sectors = 0; +unsigned int dma_free_sectors = 0; +unsigned int need_isa_buffer = 0; +static unsigned char ** dma_malloc_pages = NULL; + +static int time_start; +static int time_elapsed; +static volatile struct Scsi_Host * host_active = NULL; +#define SCSI_BLOCK(HOST) ((HOST->block && host_active && HOST != host_active) \ + || (HOST->can_queue && HOST->host_busy >= HOST->can_queue)) + +const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = +{ + "Direct-Access ", + "Sequential-Access", + "Printer ", + "Processor ", + "WORM ", + "CD-ROM ", + "Scanner ", + "Optical Device ", + "Medium Changer ", + "Communications " +}; + + +/* + * global variables : + * scsi_devices an array of these specifying the address for each + * (host, id, LUN) + */ + +Scsi_Device * scsi_devices = NULL; + +/* Process ID of SCSI commands */ +unsigned long scsi_pid = 0; + +static unsigned long serial_number = 0; + +static unsigned char generic_sense[6] = {REQUEST_SENSE, 0,0,0, 255, 0}; +static void resize_dma_pool(void); + +/* This variable is merely a hook so that we can debug the kernel with gdb. */ +Scsi_Cmnd * last_cmnd = NULL; + +/* This is the pointer to the /proc/scsi code. + * It is only initialized to !=0 if the scsi code is present + */ +#if CONFIG_PROC_FS +extern int (* dispatch_scsi_info_ptr)(int ino, char *buffer, char **start, + off_t offset, int length, int inout); +extern int dispatch_scsi_info(int ino, char *buffer, char **start, + off_t offset, int length, int inout); + +struct proc_dir_entry proc_scsi_scsi = { + PROC_SCSI_SCSI, 4, "scsi", + S_IFREG | S_IRUGO | S_IWUSR, 1, 0, 0, 0, + NULL, + NULL, NULL, + NULL, NULL, NULL +}; +#endif + +/* + * This is the number of clock ticks we should wait before we time out + * and abort the command. This is for where the scsi.c module generates + * the command, not where it originates from a higher level, in which + * case the timeout is specified there. + * + * ABORT_TIMEOUT and RESET_TIMEOUT are the timeouts for RESET and ABORT + * respectively. + */ + +#ifdef DEBUG_TIMEOUT +static void scsi_dump_status(void); +#endif + + +#ifdef DEBUG + #define SCSI_TIMEOUT (5*HZ) +#else + #define SCSI_TIMEOUT (2*HZ) +#endif + +#ifdef DEBUG + #define SENSE_TIMEOUT SCSI_TIMEOUT + #define ABORT_TIMEOUT SCSI_TIMEOUT + #define RESET_TIMEOUT SCSI_TIMEOUT +#else + #define SENSE_TIMEOUT (5*HZ/10) + #define RESET_TIMEOUT (5*HZ/10) + #define ABORT_TIMEOUT (5*HZ/10) +#endif + +#define MIN_RESET_DELAY (2*HZ) + +/* Do not call reset on error if we just did a reset within 15 sec. */ +#define MIN_RESET_PERIOD (15*HZ) + +/* The following devices are known not to tolerate a lun != 0 scan for + * one reason or another. Some will respond to all luns, others will + * lock up. + */ + +#define BLIST_NOLUN 0x01 +#define BLIST_FORCELUN 0x02 +#define BLIST_BORKEN 0x04 +#define BLIST_KEY 0x08 +#define BLIST_SINGLELUN 0x10 +#define BLIST_NOTQ 0x20 +#define BLIST_SPARSELUN 0x40 +#define BLIST_MAX5LUN 0x80 + +struct dev_info{ + const char * vendor; + const char * model; + const char * revision; /* Latest revision known to be bad. Not used yet */ + unsigned flags; +}; + +/* + * This is what was previously known as the blacklist. The concept + * has been expanded so that we can specify other types of things we + * need to be aware of. + */ +static struct dev_info device_list[] = +{ +{"TEAC","CD-R55S","1.0H", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"CHINON","CD-ROM CDS-431","H42", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"CHINON","CD-ROM CDS-535","Q14", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"DENON","DRD-25X","V", BLIST_NOLUN}, /* Locks up if probed for lun != 0 */ +{"HITACHI","DK312C","CM81", BLIST_NOLUN}, /* Responds to all lun - dtg */ +{"HITACHI","DK314C","CR21" , BLIST_NOLUN}, /* responds to all lun */ +{"IMS", "CDD521/10","2.06", BLIST_NOLUN}, /* Locks-up when LUN>0 polled. */ +{"MAXTOR","XT-3280","PR02", BLIST_NOLUN}, /* Locks-up when LUN>0 polled. */ +{"MAXTOR","XT-4380S","B3C", BLIST_NOLUN}, /* Locks-up when LUN>0 polled. */ +{"MAXTOR","MXT-1240S","I1.2", BLIST_NOLUN}, /* Locks up when LUN>0 polled */ +{"MAXTOR","XT-4170S","B5A", BLIST_NOLUN}, /* Locks-up sometimes when LUN>0 polled. */ +{"MAXTOR","XT-8760S","B7B", BLIST_NOLUN}, /* guess what? */ +{"MEDIAVIS","RENO CD-ROMX2A","2.03",BLIST_NOLUN},/*Responds to all lun */ +{"MICROP", "4110", "*", BLIST_NOTQ}, /* Buggy Tagged Queuing */ +{"NEC","CD-ROM DRIVE:841","1.0", BLIST_NOLUN}, /* Locks-up when LUN>0 polled. */ +{"RODIME","RO3000S","2.33", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"SANYO", "CRD-250S", "1.20", BLIST_NOLUN}, /* causes failed REQUEST SENSE on lun 1 + * for aha152x controller, which causes + * SCSI code to reset bus.*/ +{"SEAGATE", "ST157N", "\004|j", BLIST_NOLUN}, /* causes failed REQUEST SENSE on lun 1 + * for aha152x controller, which causes + * SCSI code to reset bus.*/ +{"SEAGATE", "ST296","921", BLIST_NOLUN}, /* Responds to all lun */ +{"SEAGATE","ST1581","6538",BLIST_NOLUN}, /* Responds to all lun */ +{"SONY","CD-ROM CDU-541","4.3d", BLIST_NOLUN}, +{"SONY","CD-ROM CDU-55S","1.0i", BLIST_NOLUN}, +{"SONY","CD-ROM CDU-561","1.7x", BLIST_NOLUN}, +{"TANDBERG","TDC 3600","U07", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"TEAC","CD-ROM","1.06", BLIST_NOLUN}, /* causes failed REQUEST SENSE on lun 1 + * for seagate controller, which causes + * SCSI code to reset bus.*/ +{"TEXEL","CD-ROM","1.06", BLIST_NOLUN}, /* causes failed REQUEST SENSE on lun 1 + * for seagate controller, which causes + * SCSI code to reset bus.*/ +{"QUANTUM","LPS525S","3110", BLIST_NOLUN}, /* Locks sometimes if polled for lun != 0 */ +{"QUANTUM","PD1225S","3110", BLIST_NOLUN}, /* Locks sometimes if polled for lun != 0 */ +{"MEDIAVIS","CDR-H93MV","1.31", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"SANKYO", "CP525","6.64", BLIST_NOLUN}, /* causes failed REQ SENSE, extra reset */ +{"HP", "C1750A", "3226", BLIST_NOLUN}, /* scanjet iic */ +{"HP", "C1790A", "", BLIST_NOLUN}, /* scanjet iip */ +{"HP", "C2500A", "", BLIST_NOLUN}, /* scanjet iicx */ + +/* + * Other types of devices that have special flags. + */ +{"SONY","CD-ROM CDU-8001","*", BLIST_BORKEN}, +{"TEXEL","CD-ROM","1.06", BLIST_BORKEN}, +{"IOMEGA","Io20S *F","*", BLIST_KEY}, +{"INSITE","Floptical F*8I","*", BLIST_KEY}, +{"INSITE","I325VM","*", BLIST_KEY}, +{"NRC","MBR-7","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"NRC","MBR-7.4","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"REGAL","CDC-4X","*", BLIST_MAX5LUN | BLIST_SINGLELUN}, +{"NAKAMICH","MJ-4.8S","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"NAKAMICH","MJ-5.16S","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"PIONEER","CD-ROM DRM-600","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"PIONEER","CD-ROM DRM-602X","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"PIONEER","CD-ROM DRM-604X","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"EMULEX","MD21/S2 ESDI","*", BLIST_SINGLELUN}, +{"CANON","IPUBJD","*", BLIST_SPARSELUN}, +{"MATSHITA","PD","*", BLIST_FORCELUN | BLIST_SINGLELUN}, +{"YAMAHA","CDR100","1.00", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"YAMAHA","CDR102","1.00", BLIST_NOLUN}, /* Locks up if polled for lun != 0 */ +{"nCipher","Fastness Crypto","*", BLIST_FORCELUN}, +/* + * Must be at end of list... + */ +{NULL, NULL, NULL} +}; + +static int get_device_flags(unsigned char * response_data){ + int i = 0; + unsigned char * pnt; + for(i=0; 1; i++){ + if(device_list[i].vendor == NULL) return 0; + pnt = &response_data[8]; + while(*pnt && *pnt == ' ') pnt++; + if(memcmp(device_list[i].vendor, pnt, + strlen(device_list[i].vendor))) continue; + pnt = &response_data[16]; + while(*pnt && *pnt == ' ') pnt++; + if(memcmp(device_list[i].model, pnt, + strlen(device_list[i].model))) continue; + return device_list[i].flags; + } + return 0; +} + +void scsi_make_blocked_list(void) { + int block_count = 0, index; + unsigned long flags; + struct Scsi_Host * sh[128], * shpnt; + + /* + * Create a circular linked list from the scsi hosts which have + * the "wish_block" field in the Scsi_Host structure set. + * The blocked list should include all the scsi hosts using ISA DMA. + * In some systems, using two dma channels simultaneously causes + * unpredictable results. + * Among the scsi hosts in the blocked list, only one host at a time + * is allowed to have active commands queued. The transition from + * one active host to the next one is allowed only when host_busy == 0 + * for the active host (which implies host_busy == 0 for all the hosts + * in the list). Moreover for block devices the transition to a new + * active host is allowed only when a request is completed, since a + * block device request can be divided into multiple scsi commands + * (when there are few sg lists or clustering is disabled). + * + * (DB, 4 Feb 1995) + */ + + save_flags(flags); + cli(); + host_active = NULL; + + for(shpnt=scsi_hostlist; shpnt; shpnt = shpnt->next) { + +#if 0 + /* + * Is this is a candidate for the blocked list? + * Useful to put into the blocked list all the hosts whose driver + * does not know about the host->block feature. + */ + if (shpnt->unchecked_isa_dma) shpnt->wish_block = 1; +#endif + + if (shpnt->wish_block) sh[block_count++] = shpnt; + } + + if (block_count == 1) sh[0]->block = NULL; + + else if (block_count > 1) { + + for(index = 0; index < block_count - 1; index++) { + sh[index]->block = sh[index + 1]; + printk("scsi%d : added to blocked host list.\n", + sh[index]->host_no); + } + + sh[block_count - 1]->block = sh[0]; + printk("scsi%d : added to blocked host list.\n", + sh[index]->host_no); + } + + restore_flags(flags); +} + +static void scan_scsis_done (Scsi_Cmnd * SCpnt) +{ + +#ifdef DEBUG + printk ("scan_scsis_done(%p, %06x)\n", SCpnt->host, SCpnt->result); +#endif + SCpnt->request.rq_status = RQ_SCSI_DONE; + + if (SCpnt->request.sem != NULL) + up(SCpnt->request.sem); +} + +#ifdef CONFIG_SCSI_MULTI_LUN +static int max_scsi_luns = 8; +#else +static int max_scsi_luns = 1; +#endif + +void scsi_luns_setup(char *str, int *ints) { + if (ints[0] != 1) + printk("scsi_luns_setup : usage max_scsi_luns=n (n should be between 1 and 8)\n"); + else + max_scsi_luns = ints[1]; +} + +/* + * Detecting SCSI devices : + * We scan all present host adapter's busses, from ID 0 to ID (max_id). + * We use the INQUIRY command, determine device type, and pass the ID / + * lun address of all sequential devices to the tape driver, all random + * devices to the disk driver. + */ +static void scan_scsis (struct Scsi_Host *shpnt, unchar hardcoded, + unchar hchannel, unchar hid, unchar hlun) +{ + int dev, lun, channel; + unsigned char scsi_result0[256]; + unsigned char *scsi_result; + Scsi_Device *SDpnt; + int max_dev_lun, sparse_lun; + Scsi_Cmnd *SCpnt; + + SCpnt = (Scsi_Cmnd *) scsi_init_malloc (sizeof (Scsi_Cmnd), GFP_ATOMIC | GFP_DMA); + SDpnt = (Scsi_Device *) scsi_init_malloc (sizeof (Scsi_Device), GFP_ATOMIC); + memset (SCpnt, 0, sizeof (Scsi_Cmnd)); + + + /* Make sure we have something that is valid for DMA purposes */ + scsi_result = ( ( !shpnt->unchecked_isa_dma ) + ? &scsi_result0[0] : scsi_init_malloc (512, GFP_DMA)); + + if (scsi_result == NULL) { + printk ("Unable to obtain scsi_result buffer\n"); + goto leave; + } + + /* We must chain ourself in the host_queue, so commands can time out */ + if(shpnt->host_queue) + shpnt->host_queue->prev = SCpnt; + SCpnt->next = shpnt->host_queue; + SCpnt->prev = NULL; + shpnt->host_queue = SCpnt; + + + if (hardcoded == 1) { + Scsi_Device *oldSDpnt=SDpnt; + struct Scsi_Device_Template * sdtpnt; + channel = hchannel; + if(channel > shpnt->max_channel) goto leave; + dev = hid; + if(dev >= shpnt->max_id) goto leave; + lun = hlun; + if(lun >= shpnt->max_lun) goto leave; + scan_scsis_single (channel, dev, lun, &max_dev_lun, &sparse_lun, + &SDpnt, SCpnt, shpnt, scsi_result); + if(SDpnt!=oldSDpnt) { + + /* it could happen the blockdevice hasn't yet been inited */ + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->init && sdtpnt->dev_noticed) (*sdtpnt->init)(); + + oldSDpnt->scsi_request_fn = NULL; + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->attach) { + (*sdtpnt->attach)(oldSDpnt); + if(oldSDpnt->attached) scsi_build_commandblocks(oldSDpnt);} + resize_dma_pool(); + + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) { + if(sdtpnt->finish && sdtpnt->nr_dev) + {(*sdtpnt->finish)();} + } + } + + } + else { + for (channel = 0; channel <= shpnt->max_channel; channel++) { + for (dev = 0; dev < shpnt->max_id; ++dev) { + if (shpnt->this_id != dev) { + + /* + * We need the for so our continue, etc. work fine. We put this in + * a variable so that we can override it during the scan if we + * detect a device *KNOWN* to have multiple logical units. + */ + max_dev_lun = (max_scsi_luns < shpnt->max_lun ? + max_scsi_luns : shpnt->max_lun); + sparse_lun = 0; + for (lun = 0; lun < max_dev_lun; ++lun) { + if (!scan_scsis_single (channel, dev, lun, &max_dev_lun, + &sparse_lun, &SDpnt, SCpnt, shpnt, + scsi_result) + && !sparse_lun) + break; /* break means don't probe further for luns!=0 */ + } /* for lun ends */ + } /* if this_id != id ends */ + } /* for dev ends */ + } /* for channel ends */ + } /* if/else hardcoded */ + + leave: + + {/* Unchain SCpnt from host_queue */ + Scsi_Cmnd *prev, *next, *hqptr; + for(hqptr = shpnt->host_queue; hqptr != SCpnt; hqptr = hqptr->next) ; + if(hqptr) { + prev = hqptr->prev; + next = hqptr->next; + if(prev) + prev->next = next; + else + shpnt->host_queue = next; + if(next) next->prev = prev; + } + } + + /* Last device block does not exist. Free memory. */ + if (SDpnt != NULL) + scsi_init_free ((char *) SDpnt, sizeof (Scsi_Device)); + + if (SCpnt != NULL) + scsi_init_free ((char *) SCpnt, sizeof (Scsi_Cmnd)); + + /* If we allocated a buffer so we could do DMA, free it now */ + if (scsi_result != &scsi_result0[0] && scsi_result != NULL) + scsi_init_free (scsi_result, 512); + +} + +/* + * The worker for scan_scsis. + * Returning 0 means Please don't ask further for lun!=0, 1 means OK go on. + * Global variables used : scsi_devices(linked list) + */ +int scan_scsis_single (int channel, int dev, int lun, int *max_dev_lun, + int *sparse_lun, Scsi_Device **SDpnt2, Scsi_Cmnd * SCpnt, + struct Scsi_Host * shpnt, char *scsi_result) +{ + unsigned char scsi_cmd[12]; + struct Scsi_Device_Template *sdtpnt; + Scsi_Device * SDtail, *SDpnt=*SDpnt2; + int bflags, type=-1; + + SDtail = scsi_devices; + if (scsi_devices) + while (SDtail->next) + SDtail = SDtail->next; + + memset (SDpnt, 0, sizeof (Scsi_Device)); + SDpnt->host = shpnt; + SDpnt->id = dev; + SDpnt->lun = lun; + SDpnt->channel = channel; + + /* Some low level driver could use device->type (DB) */ + SDpnt->type = -1; + + /* + * Assume that the device will have handshaking problems, and then fix this + * field later if it turns out it doesn't + */ + SDpnt->borken = 1; + SDpnt->was_reset = 0; + SDpnt->expecting_cc_ua = 0; + + scsi_cmd[0] = TEST_UNIT_READY; + scsi_cmd[1] = lun << 5; + scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[4] = scsi_cmd[5] = 0; + + SCpnt->host = SDpnt->host; + SCpnt->device = SDpnt; + SCpnt->target = SDpnt->id; + SCpnt->lun = SDpnt->lun; + SCpnt->channel = SDpnt->channel; + { + struct semaphore sem = MUTEX_LOCKED; + SCpnt->request.sem = &sem; + SCpnt->request.rq_status = RQ_SCSI_BUSY; + scsi_do_cmd (SCpnt, (void *) scsi_cmd, + (void *) scsi_result, + 256, scan_scsis_done, SCSI_TIMEOUT + 4 * HZ, 5); + down (&sem); + } + +#if defined(DEBUG) || defined(DEBUG_INIT) + printk ("scsi: scan_scsis_single id %d lun %d. Return code 0x%08x\n", + dev, lun, SCpnt->result); + print_driverbyte(SCpnt->result); print_hostbyte(SCpnt->result); + printk("\n"); +#endif + + if (SCpnt->result) { + if (((driver_byte (SCpnt->result) & DRIVER_SENSE) || + (status_byte (SCpnt->result) & CHECK_CONDITION)) && + ((SCpnt->sense_buffer[0] & 0x70) >> 4) == 7) { + if (((SCpnt->sense_buffer[2] & 0xf) != NOT_READY) && + ((SCpnt->sense_buffer[2] & 0xf) != UNIT_ATTENTION) && + ((SCpnt->sense_buffer[2] & 0xf) != ILLEGAL_REQUEST || lun > 0)) + return 1; + } + else + return 0; + } + +#if defined (DEBUG) || defined(DEBUG_INIT) + printk ("scsi: performing INQUIRY\n"); +#endif + /* + * Build an INQUIRY command block. + */ + scsi_cmd[0] = INQUIRY; + scsi_cmd[1] = (lun << 5) & 0xe0; + scsi_cmd[2] = 0; + scsi_cmd[3] = 0; + scsi_cmd[4] = 255; + scsi_cmd[5] = 0; + SCpnt->cmd_len = 0; + { + struct semaphore sem = MUTEX_LOCKED; + SCpnt->request.sem = &sem; + SCpnt->request.rq_status = RQ_SCSI_BUSY; + scsi_do_cmd (SCpnt, (void *) scsi_cmd, + (void *) scsi_result, + 256, scan_scsis_done, SCSI_TIMEOUT, 3); + down (&sem); + } + +#if defined(DEBUG) || defined(DEBUG_INIT) + printk ("scsi: INQUIRY %s with code 0x%x\n", + SCpnt->result ? "failed" : "successful", SCpnt->result); +#endif + + if (SCpnt->result) + return 0; /* assume no peripheral if any sort of error */ + + /* + * Check the peripheral qualifier field - this tells us whether LUNS + * are supported here or not. + */ + if( (scsi_result[0] >> 5) == 3 ) + { + return 0; /* assume no peripheral if any sort of error */ + } + + /* + * It would seem some TOSHIBA CDROM gets things wrong + */ + if (!strncmp (scsi_result + 8, "TOSHIBA", 7) && + !strncmp (scsi_result + 16, "CD-ROM", 6) && + scsi_result[0] == TYPE_DISK) { + scsi_result[0] = TYPE_ROM; + scsi_result[1] |= 0x80; /* removable */ + } + + if (!strncmp (scsi_result + 8, "NEC", 3)) { + if (!strncmp (scsi_result + 16, "CD-ROM DRIVE:84 ", 16) || + !strncmp (scsi_result + 16, "CD-ROM DRIVE:25", 15)) + SDpnt->manufacturer = SCSI_MAN_NEC_OLDCDR; + else + SDpnt->manufacturer = SCSI_MAN_NEC; + } + else if (!strncmp (scsi_result + 8, "TOSHIBA", 7)) + SDpnt->manufacturer = SCSI_MAN_TOSHIBA; + else if (!strncmp (scsi_result + 8, "SONY", 4)) + SDpnt->manufacturer = SCSI_MAN_SONY; + else if (!strncmp (scsi_result + 8, "PIONEER", 7)) + SDpnt->manufacturer = SCSI_MAN_PIONEER; + else + SDpnt->manufacturer = SCSI_MAN_UNKNOWN; + + memcpy (SDpnt->vendor, scsi_result + 8, 8); + memcpy (SDpnt->model, scsi_result + 16, 16); + memcpy (SDpnt->rev, scsi_result + 32, 4); + + SDpnt->removable = (0x80 & scsi_result[1]) >> 7; + SDpnt->lockable = SDpnt->removable; + SDpnt->changed = 0; + SDpnt->access_count = 0; + SDpnt->busy = 0; + SDpnt->has_cmdblocks = 0; + /* + * Currently, all sequential devices are assumed to be tapes, all random + * devices disk, with the appropriate read only flags set for ROM / WORM + * treated as RO. + */ + switch (type = (scsi_result[0] & 0x1f)) { + case TYPE_TAPE: + case TYPE_DISK: + case TYPE_MOD: + case TYPE_PROCESSOR: + case TYPE_SCANNER: + case TYPE_MEDIUM_CHANGER: + SDpnt->writeable = 1; + break; + case TYPE_WORM: + case TYPE_ROM: + SDpnt->writeable = 0; + break; + default: + printk ("scsi: unknown type %d\n", type); + } + + SDpnt->single_lun = 0; + SDpnt->soft_reset = + (scsi_result[7] & 1) && ((scsi_result[3] & 7) == 2); + SDpnt->random = (type == TYPE_TAPE) ? 0 : 1; + SDpnt->type = (type & 0x1f); + + print_inquiry (scsi_result); + + for (sdtpnt = scsi_devicelist; sdtpnt; + sdtpnt = sdtpnt->next) + if (sdtpnt->detect) + SDpnt->attached += + (*sdtpnt->detect) (SDpnt); + + SDpnt->scsi_level = scsi_result[2] & 0x07; + if (SDpnt->scsi_level >= 2 || + (SDpnt->scsi_level == 1 && + (scsi_result[3] & 0x0f) == 1)) + SDpnt->scsi_level++; + + /* + * Accommodate drivers that want to sleep when they should be in a polling + * loop. + */ + SDpnt->disconnect = 0; + + /* + * Get any flags for this device. + */ + bflags = get_device_flags (scsi_result); + + /* + * Set the tagged_queue flag for SCSI-II devices that purport to support + * tagged queuing in the INQUIRY data. + */ + SDpnt->tagged_queue = 0; + if ((SDpnt->scsi_level >= SCSI_2) && + (scsi_result[7] & 2) && + !(bflags & BLIST_NOTQ)) { + SDpnt->tagged_supported = 1; + SDpnt->current_tag = 0; + } + + /* + * Some revisions of the Texel CD ROM drives have handshaking problems when + * used with the Seagate controllers. Before we know what type of device + * we're talking to, we assume it's borken and then change it here if it + * turns out that it isn't a TEXEL drive. + */ + if ((bflags & BLIST_BORKEN) == 0) + SDpnt->borken = 0; + + /* + * If we want to only allow I/O to one of the luns attached to this device + * at a time, then we set this flag. + */ + if (bflags & BLIST_SINGLELUN) + SDpnt->single_lun = 1; + + /* + * These devices need this "key" to unlock the devices so we can use it + */ + if ((bflags & BLIST_KEY) != 0) { + printk ("Unlocked floptical drive.\n"); + SDpnt->lockable = 0; + scsi_cmd[0] = MODE_SENSE; + scsi_cmd[1] = (lun << 5) & 0xe0; + scsi_cmd[2] = 0x2e; + scsi_cmd[3] = 0; + scsi_cmd[4] = 0x2a; + scsi_cmd[5] = 0; + SCpnt->cmd_len = 0; + { + struct semaphore sem = MUTEX_LOCKED; + SCpnt->request.rq_status = RQ_SCSI_BUSY; + SCpnt->request.sem = &sem; + scsi_do_cmd (SCpnt, (void *) scsi_cmd, + (void *) scsi_result, 0x2a, + scan_scsis_done, SCSI_TIMEOUT, 3); + down (&sem); + } + } + /* Add this device to the linked list at the end */ + if (SDtail) + SDtail->next = SDpnt; + else + scsi_devices = SDpnt; + SDtail = SDpnt; + + SDpnt = (Scsi_Device *) scsi_init_malloc (sizeof (Scsi_Device), GFP_ATOMIC); + *SDpnt2=SDpnt; + if (!SDpnt) + printk ("scsi: scan_scsis_single: Cannot malloc\n"); + + + /* + * Some scsi devices cannot be polled for lun != 0 due to firmware bugs + */ + if (bflags & BLIST_NOLUN) + return 0; /* break; */ + + /* + * If this device is known to support sparse multiple units, override the + * other settings, and scan all of them. + */ + if (bflags & BLIST_SPARSELUN) { + *max_dev_lun = 8; + *sparse_lun = 1; + return 1; + } + + /* + * If this device is known to support multiple units, override the other + * settings, and scan all of them. + */ + if (bflags & BLIST_FORCELUN) { + *max_dev_lun = 8; + return 1; + } + + /* + * REGAL CDC-4X: avoid hang after LUN 4 + */ + if (bflags & BLIST_MAX5LUN) { + *max_dev_lun = 5; + return 1; + } + + /* + * We assume the device can't handle lun!=0 if: - it reports scsi-0 (ANSI + * SCSI Revision 0) (old drives like MAXTOR XT-3280) or - it reports scsi-1 + * (ANSI SCSI Revision 1) and Response Data Format 0 + */ + if (((scsi_result[2] & 0x07) == 0) + || + ((scsi_result[2] & 0x07) == 1 && + (scsi_result[3] & 0x0f) == 0)) + return 0; + return 1; +} + +/* + * Flag bits for the internal_timeout array + */ +#define NORMAL_TIMEOUT 0 +#define IN_ABORT 1 +#define IN_RESET 2 +#define IN_RESET2 4 +#define IN_RESET3 8 + +/* + * This is our time out function, called when the timer expires for a + * given host adapter. It will attempt to abort the currently executing + * command, that failing perform a kernel panic. + */ + +static void scsi_times_out (Scsi_Cmnd * SCpnt) +{ + + switch (SCpnt->internal_timeout & (IN_ABORT | IN_RESET | IN_RESET2 | IN_RESET3)) + { + case NORMAL_TIMEOUT: + { +#ifdef DEBUG_TIMEOUT + scsi_dump_status(); +#endif + } + + if (!scsi_abort (SCpnt, DID_TIME_OUT)) + return; + case IN_ABORT: + printk("SCSI host %d abort (pid %ld) timed out - resetting\n", + SCpnt->host->host_no, SCpnt->pid); + if (!scsi_reset (SCpnt, SCSI_RESET_ASYNCHRONOUS)) + return; + case IN_RESET: + case (IN_ABORT | IN_RESET): + /* This might be controversial, but if there is a bus hang, + * you might conceivably want the machine up and running + * esp if you have an ide disk. + */ + printk("SCSI host %d channel %d reset (pid %ld) timed out - " + "trying harder\n", + SCpnt->host->host_no, SCpnt->channel, SCpnt->pid); + SCpnt->internal_timeout &= ~IN_RESET; + SCpnt->internal_timeout |= IN_RESET2; + scsi_reset (SCpnt, + SCSI_RESET_ASYNCHRONOUS | SCSI_RESET_SUGGEST_BUS_RESET); + return; + case IN_RESET2: + case (IN_ABORT | IN_RESET2): + /* Obviously the bus reset didn't work. + * Let's try even harder and call for an HBA reset. + * Maybe the HBA itself crashed and this will shake it loose. + */ + printk("SCSI host %d reset (pid %ld) timed out - trying to shake it loose\n", + SCpnt->host->host_no, SCpnt->pid); + SCpnt->internal_timeout &= ~(IN_RESET | IN_RESET2); + SCpnt->internal_timeout |= IN_RESET3; + scsi_reset (SCpnt, + SCSI_RESET_ASYNCHRONOUS | SCSI_RESET_SUGGEST_HOST_RESET); + return; + + default: + printk("SCSI host %d reset (pid %ld) timed out again -\n", + SCpnt->host->host_no, SCpnt->pid); + printk("probably an unrecoverable SCSI bus or device hang.\n"); + return; + + } + +} + + +/* This function takes a quick look at a request, and decides if it + * can be queued now, or if there would be a stall while waiting for + * something else to finish. This routine assumes that interrupts are + * turned off when entering the routine. It is the responsibility + * of the calling code to ensure that this is the case. + */ + +Scsi_Cmnd * request_queueable (struct request * req, Scsi_Device * device) +{ + Scsi_Cmnd * SCpnt = NULL; + int tablesize; + Scsi_Cmnd * found = NULL; + struct buffer_head * bh, *bhp; + + if (!device) + panic ("No device passed to request_queueable().\n"); + + if (req && req->rq_status == RQ_INACTIVE) + panic("Inactive in request_queueable"); + + /* + * Look for a free command block. If we have been instructed not to queue + * multiple commands to multi-lun devices, then check to see what else is + * going for this device first. + */ + + if (!device->single_lun) { + SCpnt = device->device_queue; + while(SCpnt){ + if(SCpnt->request.rq_status == RQ_INACTIVE) break; + SCpnt = SCpnt->device_next; + } + } else { + SCpnt = device->host->host_queue; + while(SCpnt){ + if(SCpnt->channel == device->channel + && SCpnt->target == device->id) { + if (SCpnt->lun == device->lun) { + if(found == NULL + && SCpnt->request.rq_status == RQ_INACTIVE) + { + found=SCpnt; + } + } + if(SCpnt->request.rq_status != RQ_INACTIVE) { + /* + * I think that we should really limit things to one + * outstanding command per device - this is what tends + * to trip up buggy firmware. + */ + return NULL; + } + } + SCpnt = SCpnt->next; + } + SCpnt = found; + } + + if (!SCpnt) return NULL; + + if (SCSI_BLOCK(device->host)) return NULL; + + if (req) { + memcpy(&SCpnt->request, req, sizeof(struct request)); + tablesize = device->host->sg_tablesize; + bhp = bh = req->bh; + if(!tablesize) bh = NULL; + /* Take a quick look through the table to see how big it is. + * We already have our copy of req, so we can mess with that + * if we want to. + */ + while(req->nr_sectors && bh){ + bhp = bhp->b_reqnext; + if(!bhp || !CONTIGUOUS_BUFFERS(bh,bhp)) tablesize--; + req->nr_sectors -= bh->b_size >> 9; + req->sector += bh->b_size >> 9; + if(!tablesize) break; + bh = bhp; + } + if(req->nr_sectors && bh && bh->b_reqnext){ /* Any leftovers? */ + SCpnt->request.bhtail = bh; + req->bh = bh->b_reqnext; /* Divide request */ + bh->b_reqnext = NULL; + bh = req->bh; + + /* Now reset things so that req looks OK */ + SCpnt->request.nr_sectors -= req->nr_sectors; + req->current_nr_sectors = bh->b_size >> 9; + req->buffer = bh->b_data; + SCpnt->request.sem = NULL; /* Wait until whole thing done */ + } else { + req->rq_status = RQ_INACTIVE; + wake_up(&wait_for_request); + } + } else { + SCpnt->request.rq_status = RQ_SCSI_BUSY; /* Busy, but no request */ + SCpnt->request.sem = NULL; /* And no one is waiting for the device + * either */ + } + + SCpnt->use_sg = 0; /* Reset the scatter-gather flag */ + SCpnt->old_use_sg = 0; + SCpnt->transfersize = 0; + SCpnt->underflow = 0; + SCpnt->cmd_len = 0; + +/* Since not everyone seems to set the device info correctly + * before Scsi_Cmnd gets send out to scsi_do_command, we do it here. + */ + SCpnt->channel = device->channel; + SCpnt->lun = device->lun; + SCpnt->target = device->id; + + return SCpnt; +} + +/* This function returns a structure pointer that will be valid for + * the device. The wait parameter tells us whether we should wait for + * the unit to become free or not. We are also able to tell this routine + * not to return a descriptor if the host is unable to accept any more + * commands for the time being. We need to keep in mind that there is no + * guarantee that the host remain not busy. Keep in mind the + * request_queueable function also knows the internal allocation scheme + * of the packets for each device + */ + +Scsi_Cmnd * allocate_device (struct request ** reqp, Scsi_Device * device, + int wait) +{ + kdev_t dev; + struct request * req = NULL; + int tablesize; + unsigned long flags; + struct buffer_head * bh, *bhp; + struct Scsi_Host * host; + Scsi_Cmnd * SCpnt = NULL; + Scsi_Cmnd * SCwait = NULL; + Scsi_Cmnd * found = NULL; + + if (!device) + panic ("No device passed to allocate_device().\n"); + + if (reqp) req = *reqp; + + /* See if this request has already been queued by an interrupt routine */ + if (req) { + if(req->rq_status == RQ_INACTIVE) return NULL; + dev = req->rq_dev; + } else + dev = 0; /* unused */ + + host = device->host; + + if (intr_count && SCSI_BLOCK(host)) return NULL; + + while (1==1){ + if (!device->single_lun) { + SCpnt = device->device_queue; + while(SCpnt){ + SCwait = SCpnt; + if(SCpnt->request.rq_status == RQ_INACTIVE) break; + SCpnt = SCpnt->device_next; + } + } else { + SCpnt = device->host->host_queue; + while(SCpnt){ + if(SCpnt->channel == device->channel + && SCpnt->target == device->id) { + if (SCpnt->lun == device->lun) { + SCwait = SCpnt; + if(found == NULL + && SCpnt->request.rq_status == RQ_INACTIVE) + { + found=SCpnt; + } + } + if(SCpnt->request.rq_status != RQ_INACTIVE) { + /* + * I think that we should really limit things to one + * outstanding command per device - this is what tends + * to trip up buggy firmware. + */ + found = NULL; + break; + } + } + SCpnt = SCpnt->next; + } + SCpnt = found; + } + + save_flags(flags); + cli(); + /* See if this request has already been queued by an interrupt routine + */ + if (req && (req->rq_status == RQ_INACTIVE || req->rq_dev != dev)) { + restore_flags(flags); + return NULL; + } + if (!SCpnt || SCpnt->request.rq_status != RQ_INACTIVE) /* Might have changed */ + { +#if 1 /* NEW CODE */ + if (wait && SCwait && SCwait->request.rq_status != RQ_INACTIVE){ + sleep_on(&device->device_wait); + restore_flags(flags); + } else { + restore_flags(flags); + if (!wait) return NULL; + if (!SCwait) { + printk("Attempt to allocate device channel %d," + " target %d, lun %d\n", device->channel, + device->id, device->lun); + panic("No device found in allocate_device\n"); + } + } +#else /* ORIGINAL CODE */ + restore_flags(flags); + if(!wait) return NULL; + if (!SCwait) { + printk("Attempt to allocate device channel %d, target" + " %d, lun %d\n", device->channel, device->id, + device->lun); + panic("No device found in allocate_device\n"); + } + SCSI_SLEEP(&device->device_wait, + (SCwait->request.rq_status != RQ_INACTIVE)); +#endif + } else { + if (req) { + memcpy(&SCpnt->request, req, sizeof(struct request)); + tablesize = device->host->sg_tablesize; + bhp = bh = req->bh; + if(!tablesize) bh = NULL; + /* Take a quick look through the table to see how big it is. + * We already have our copy of req, so we can mess with that + * if we want to. + */ + while(req->nr_sectors && bh){ + bhp = bhp->b_reqnext; + if(!bhp || !CONTIGUOUS_BUFFERS(bh,bhp)) tablesize--; + req->nr_sectors -= bh->b_size >> 9; + req->sector += bh->b_size >> 9; + if(!tablesize) break; + bh = bhp; + } + if(req->nr_sectors && bh && bh->b_reqnext){/* Any leftovers? */ + SCpnt->request.bhtail = bh; + req->bh = bh->b_reqnext; /* Divide request */ + bh->b_reqnext = NULL; + bh = req->bh; + /* Now reset things so that req looks OK */ + SCpnt->request.nr_sectors -= req->nr_sectors; + req->current_nr_sectors = bh->b_size >> 9; + req->buffer = bh->b_data; + SCpnt->request.sem = NULL; /* Wait until whole thing done*/ + } + else + { + req->rq_status = RQ_INACTIVE; + *reqp = req->next; + wake_up(&wait_for_request); + } + } else { + SCpnt->request.rq_status = RQ_SCSI_BUSY; + SCpnt->request.sem = NULL; /* And no one is waiting for this + * to complete */ + } + restore_flags(flags); + break; + } + } + + SCpnt->use_sg = 0; /* Reset the scatter-gather flag */ + SCpnt->old_use_sg = 0; + SCpnt->transfersize = 0; /* No default transfer size */ + SCpnt->cmd_len = 0; + + SCpnt->underflow = 0; /* Do not flag underflow conditions */ + + /* Since not everyone seems to set the device info correctly + * before Scsi_Cmnd gets send out to scsi_do_command, we do it here. + */ + SCpnt->channel = device->channel; + SCpnt->lun = device->lun; + SCpnt->target = device->id; + + return SCpnt; +} + +/* + * This is inline because we have stack problemes if we recurse to deeply. + */ + +inline void internal_cmnd (Scsi_Cmnd * SCpnt) +{ + unsigned long flags, timeout; + struct Scsi_Host * host; +#ifdef DEBUG_DELAY + unsigned long clock; +#endif + +#if DEBUG + unsigned long *ret = 0; +#ifdef __mips__ + __asm__ __volatile__ ("move\t%0,$31":"=r"(ret)); +#else + ret = __builtin_return_address(0); +#endif +#endif + + host = SCpnt->host; + + save_flags(flags); + cli(); + /* Assign a unique nonzero serial_number. */ + if (++serial_number == 0) serial_number = 1; + SCpnt->serial_number = serial_number; + + /* + * We will wait MIN_RESET_DELAY clock ticks after the last reset so + * we can avoid the drive not being ready. + */ + timeout = host->last_reset + MIN_RESET_DELAY; + if (jiffies < timeout) { + int ticks_remaining = timeout - jiffies; + /* + * NOTE: This may be executed from within an interrupt + * handler! This is bad, but for now, it'll do. The irq + * level of the interrupt handler has been masked out by the + * platform dependent interrupt handling code already, so the + * sti() here will not cause another call to the SCSI host's + * interrupt handler (assuming there is one irq-level per + * host). + */ + sti(); + while (--ticks_remaining >= 0) udelay(1000000/HZ); + host->last_reset = jiffies - MIN_RESET_DELAY; + } + restore_flags(flags); + + update_timeout(SCpnt, SCpnt->timeout_per_command); + + /* + * We will use a queued command if possible, otherwise we will emulate the + * queuing and calling of completion function ourselves. + */ +#ifdef DEBUG + printk("internal_cmnd (host = %d, channel = %d, target = %d, " + "command = %p, buffer = %p, \nbufflen = %d, done = %p)\n", + SCpnt->host->host_no, SCpnt->channel, SCpnt->target, SCpnt->cmnd, + SCpnt->buffer, SCpnt->bufflen, SCpnt->done); +#endif + + if (host->can_queue) + { +#ifdef DEBUG + printk("queuecommand : routine at %p\n", + host->hostt->queuecommand); +#endif + /* This locking tries to prevent all sorts of races between + * queuecommand and the interrupt code. In effect, + * we are only allowed to be in queuecommand once at + * any given time, and we can only be in the interrupt + * handler and the queuecommand function at the same time + * when queuecommand is called while servicing the + * interrupt. + */ + + if(!intr_count && SCpnt->host->irq) + disable_irq(SCpnt->host->irq); + + host->hostt->queuecommand (SCpnt, scsi_done); + + if(!intr_count && SCpnt->host->irq) + enable_irq(SCpnt->host->irq); + } + else + { + int temp; + +#ifdef DEBUG + printk("command() : routine at %p\n", host->hostt->command); +#endif + temp = host->hostt->command (SCpnt); + SCpnt->result = temp; +#ifdef DEBUG_DELAY + clock = jiffies + 4 * HZ; + while (jiffies < clock) barrier(); + printk("done(host = %d, result = %04x) : routine at %p\n", + host->host_no, temp, host->hostt->command); +#endif + scsi_done(SCpnt); + } +#ifdef DEBUG + printk("leaving internal_cmnd()\n"); +#endif +} + +static void scsi_request_sense (Scsi_Cmnd * SCpnt) +{ + unsigned long flags; + + save_flags(flags); + cli(); + SCpnt->flags |= WAS_SENSE | ASKED_FOR_SENSE; + update_timeout(SCpnt, SENSE_TIMEOUT); + restore_flags(flags); + + + memcpy ((void *) SCpnt->cmnd , (void *) generic_sense, + sizeof(generic_sense)); + + SCpnt->cmnd[1] = SCpnt->lun << 5; + SCpnt->cmnd[4] = sizeof(SCpnt->sense_buffer); + + SCpnt->request_buffer = &SCpnt->sense_buffer; + SCpnt->request_bufflen = sizeof(SCpnt->sense_buffer); + SCpnt->use_sg = 0; + SCpnt->cmd_len = COMMAND_SIZE(SCpnt->cmnd[0]); + internal_cmnd (SCpnt); +} + + + +/* + * scsi_do_cmd sends all the commands out to the low-level driver. It + * handles the specifics required for each low level driver - ie queued + * or non queued. It also prevents conflicts when different high level + * drivers go for the same host at the same time. + */ + +void scsi_do_cmd (Scsi_Cmnd * SCpnt, const void *cmnd , + void *buffer, unsigned bufflen, void (*done)(Scsi_Cmnd *), + int timeout, int retries) +{ + unsigned long flags; + struct Scsi_Host * host = SCpnt->host; + +#ifdef DEBUG + { + int i; + int target = SCpnt->target; + printk ("scsi_do_cmd (host = %d, channel = %d target = %d, " + "buffer =%p, bufflen = %d, done = %p, timeout = %d, " + "retries = %d)\n" + "command : " , host->host_no, SCpnt->channel, target, buffer, + bufflen, done, timeout, retries); + for (i = 0; i < 10; ++i) + printk ("%02x ", ((unsigned char *) cmnd)[i]); + printk("\n"); + } +#endif + + if (!host) + { + panic ("Invalid or not present host.\n"); + } + + + /* + * We must prevent reentrancy to the lowlevel host driver. This prevents + * it - we enter a loop until the host we want to talk to is not busy. + * Race conditions are prevented, as interrupts are disabled in between the + * time we check for the host being not busy, and the time we mark it busy + * ourselves. + */ + + save_flags(flags); + cli(); + SCpnt->pid = scsi_pid++; + + while (SCSI_BLOCK(host)) { + restore_flags(flags); + SCSI_SLEEP(&host->host_wait, SCSI_BLOCK(host)); + cli(); + } + + if (host->block) host_active = host; + + host->host_busy++; + restore_flags(flags); + + /* + * Our own function scsi_done (which marks the host as not busy, disables + * the timeout counter, etc) will be called by us or by the + * scsi_hosts[host].queuecommand() function needs to also call + * the completion function for the high level driver. + */ + + memcpy ((void *) SCpnt->data_cmnd , (const void *) cmnd, 12); +#if 0 + SCpnt->host = host; + SCpnt->channel = channel; + SCpnt->target = target; + SCpnt->lun = (SCpnt->data_cmnd[1] >> 5); +#endif + SCpnt->reset_chain = NULL; + SCpnt->serial_number = 0; + SCpnt->bufflen = bufflen; + SCpnt->buffer = buffer; + SCpnt->flags = 0; + SCpnt->retries = 0; + SCpnt->allowed = retries; + SCpnt->done = done; + SCpnt->timeout_per_command = timeout; + + memcpy ((void *) SCpnt->cmnd , (const void *) cmnd, 12); + /* Zero the sense buffer. Some host adapters automatically request + * sense on error. 0 is not a valid sense code. + */ + memset ((void *) SCpnt->sense_buffer, 0, sizeof SCpnt->sense_buffer); + SCpnt->request_buffer = buffer; + SCpnt->request_bufflen = bufflen; + SCpnt->old_use_sg = SCpnt->use_sg; + if (SCpnt->cmd_len == 0) + SCpnt->cmd_len = COMMAND_SIZE(SCpnt->cmnd[0]); + SCpnt->old_cmd_len = SCpnt->cmd_len; + + /* Start the timer ticking. */ + + SCpnt->internal_timeout = NORMAL_TIMEOUT; + SCpnt->abort_reason = 0; + internal_cmnd (SCpnt); + +#ifdef DEBUG + printk ("Leaving scsi_do_cmd()\n"); +#endif +} + +static int check_sense (Scsi_Cmnd * SCpnt) +{ + /* If there is no sense information, request it. If we have already + * requested it, there is no point in asking again - the firmware must + * be confused. + */ + if (((SCpnt->sense_buffer[0] & 0x70) >> 4) != 7) { + if(!(SCpnt->flags & ASKED_FOR_SENSE)) + return SUGGEST_SENSE; + else + return SUGGEST_RETRY; + } + + SCpnt->flags &= ~ASKED_FOR_SENSE; + +#ifdef DEBUG_INIT + printk("scsi%d, channel%d : ", SCpnt->host->host_no, SCpnt->channel); + print_sense("", SCpnt); + printk("\n"); +#endif + if (SCpnt->sense_buffer[2] & 0xe0) + return SUGGEST_ABORT; + + switch (SCpnt->sense_buffer[2] & 0xf) + { + case NO_SENSE: + return 0; + case RECOVERED_ERROR: + return SUGGEST_IS_OK; + + case ABORTED_COMMAND: + return SUGGEST_RETRY; + case NOT_READY: + case UNIT_ATTENTION: + /* + * If we are expecting a CC/UA because of a bus reset that we + * performed, treat this just as a retry. Otherwise this is + * information that we should pass up to the upper-level driver + * so that we can deal with it there. + */ + if( SCpnt->device->expecting_cc_ua ) + { + SCpnt->device->expecting_cc_ua = 0; + return SUGGEST_RETRY; + } + return SUGGEST_ABORT; + + /* these three are not supported */ + case COPY_ABORTED: + case VOLUME_OVERFLOW: + case MISCOMPARE: + + case MEDIUM_ERROR: + return SUGGEST_REMAP; + case BLANK_CHECK: + case DATA_PROTECT: + case HARDWARE_ERROR: + case ILLEGAL_REQUEST: + default: + return SUGGEST_ABORT; + } +} + +/* This function is the mid-level interrupt routine, which decides how + * to handle error conditions. Each invocation of this function must + * do one and *only* one of the following: + * + * (1) Call last_cmnd[host].done. This is done for fatal errors and + * normal completion, and indicates that the handling for this + * request is complete. + * (2) Call internal_cmnd to requeue the command. This will result in + * scsi_done being called again when the retry is complete. + * (3) Call scsi_request_sense. This asks the host adapter/drive for + * more information about the error condition. When the information + * is available, scsi_done will be called again. + * (4) Call reset(). This is sort of a last resort, and the idea is that + * this may kick things loose and get the drive working again. reset() + * automatically calls scsi_request_sense, and thus scsi_done will be + * called again once the reset is complete. + * + * If none of the above actions are taken, the drive in question + * will hang. If more than one of the above actions are taken by + * scsi_done, then unpredictable behavior will result. + */ +static void scsi_done (Scsi_Cmnd * SCpnt) +{ + int status=0; + int exit=0; + int checked; + int oldto; + struct Scsi_Host * host = SCpnt->host; + int result = SCpnt->result; + SCpnt->serial_number = 0; + oldto = update_timeout(SCpnt, 0); + +#ifdef DEBUG_TIMEOUT + if(result) printk("Non-zero result in scsi_done %x %d:%d\n", + result, SCpnt->target, SCpnt->lun); +#endif + + /* If we requested an abort, (and we got it) then fix up the return + * status to say why + */ + if(host_byte(result) == DID_ABORT && SCpnt->abort_reason) + SCpnt->result = result = (result & 0xff00ffff) | + (SCpnt->abort_reason << 16); + + +#define FINISHED 0 +#define MAYREDO 1 +#define REDO 3 +#define PENDING 4 + +#ifdef DEBUG + printk("In scsi_done(host = %d, result = %06x)\n", host->host_no, result); +#endif + + if(SCpnt->flags & WAS_SENSE) + { + SCpnt->use_sg = SCpnt->old_use_sg; + SCpnt->cmd_len = SCpnt->old_cmd_len; + } + + switch (host_byte(result)) + { + case DID_OK: + if (status_byte(result) && (SCpnt->flags & WAS_SENSE)) + /* Failed to obtain sense information */ + { + SCpnt->flags &= ~WAS_SENSE; +#if 0 /* This cannot possibly be correct. */ + SCpnt->internal_timeout &= ~SENSE_TIMEOUT; +#endif + + if (!(SCpnt->flags & WAS_RESET)) + { + printk("scsi%d : channel %d target %d lun %d request sense" + " failed, performing reset.\n", + SCpnt->host->host_no, SCpnt->channel, SCpnt->target, + SCpnt->lun); + scsi_reset(SCpnt, SCSI_RESET_SYNCHRONOUS); + return; + } + else + { + exit = (DRIVER_HARD | SUGGEST_ABORT); + status = FINISHED; + } + } + else switch(msg_byte(result)) + { + case COMMAND_COMPLETE: + switch (status_byte(result)) + { + case GOOD: + if (SCpnt->flags & WAS_SENSE) + { +#ifdef DEBUG + printk ("In scsi_done, GOOD status, COMMAND COMPLETE, " + "parsing sense information.\n"); +#endif + SCpnt->flags &= ~WAS_SENSE; +#if 0 /* This cannot possibly be correct. */ + SCpnt->internal_timeout &= ~SENSE_TIMEOUT; +#endif + + switch (checked = check_sense(SCpnt)) + { + case SUGGEST_SENSE: + case 0: +#ifdef DEBUG + printk("NO SENSE. status = REDO\n"); +#endif + update_timeout(SCpnt, oldto); + status = REDO; + break; + case SUGGEST_IS_OK: + break; + case SUGGEST_REMAP: +#ifdef DEBUG + printk("SENSE SUGGEST REMAP - status = FINISHED\n"); +#endif + status = FINISHED; + exit = DRIVER_SENSE | SUGGEST_ABORT; + break; + case SUGGEST_RETRY: +#ifdef DEBUG + printk("SENSE SUGGEST RETRY - status = MAYREDO\n"); +#endif + status = MAYREDO; + exit = DRIVER_SENSE | SUGGEST_RETRY; + break; + case SUGGEST_ABORT: +#ifdef DEBUG + printk("SENSE SUGGEST ABORT - status = FINISHED"); +#endif + status = FINISHED; + exit = DRIVER_SENSE | SUGGEST_ABORT; + break; + default: + printk ("Internal error %s %d \n", __FILE__, + __LINE__); + } + } /* end WAS_SENSE */ + else + { +#ifdef DEBUG + printk("COMMAND COMPLETE message returned, " + "status = FINISHED. \n"); +#endif + exit = DRIVER_OK; + status = FINISHED; + } + break; + + case CHECK_CONDITION: + case COMMAND_TERMINATED: + switch (check_sense(SCpnt)) + { + case 0: + update_timeout(SCpnt, oldto); + status = REDO; + break; + case SUGGEST_REMAP: + status = FINISHED; + exit = DRIVER_SENSE | SUGGEST_ABORT; + break; + case SUGGEST_RETRY: + status = MAYREDO; + exit = DRIVER_SENSE | SUGGEST_RETRY; + break; + case SUGGEST_ABORT: + status = FINISHED; + exit = DRIVER_SENSE | SUGGEST_ABORT; + break; + case SUGGEST_SENSE: + scsi_request_sense (SCpnt); + status = PENDING; + break; + } + break; + + case CONDITION_GOOD: + case INTERMEDIATE_GOOD: + case INTERMEDIATE_C_GOOD: + break; + + case BUSY: + case QUEUE_FULL: + update_timeout(SCpnt, oldto); + status = REDO; + break; + + case RESERVATION_CONFLICT: + printk("scsi%d, channel %d : RESERVATION CONFLICT performing" + " reset.\n", SCpnt->host->host_no, SCpnt->channel); + scsi_reset(SCpnt, SCSI_RESET_SYNCHRONOUS); + return; +#if 0 + exit = DRIVER_SOFT | SUGGEST_ABORT; + status = MAYREDO; + break; +#endif + default: + printk ("Internal error %s %d \n" + "status byte = %d \n", __FILE__, + __LINE__, status_byte(result)); + + } + break; + default: + panic("scsi: unsupported message byte %d received\n", + msg_byte(result)); + } + break; + case DID_TIME_OUT: +#ifdef DEBUG + printk("Host returned DID_TIME_OUT - "); +#endif + + if (SCpnt->flags & WAS_TIMEDOUT) + { +#ifdef DEBUG + printk("Aborting\n"); +#endif + /* + Allow TEST_UNIT_READY and INQUIRY commands to timeout early + without causing resets. All other commands should be retried. + */ + if (SCpnt->cmnd[0] != TEST_UNIT_READY && + SCpnt->cmnd[0] != INQUIRY) + status = MAYREDO; + exit = (DRIVER_TIMEOUT | SUGGEST_ABORT); + } + else + { +#ifdef DEBUG + printk ("Retrying.\n"); +#endif + SCpnt->flags |= WAS_TIMEDOUT; + SCpnt->internal_timeout &= ~IN_ABORT; + status = REDO; + } + break; + case DID_BUS_BUSY: + case DID_PARITY: + status = REDO; + break; + case DID_NO_CONNECT: +#ifdef DEBUG + printk("Couldn't connect.\n"); +#endif + exit = (DRIVER_HARD | SUGGEST_ABORT); + break; + case DID_ERROR: + status = MAYREDO; + exit = (DRIVER_HARD | SUGGEST_ABORT); + break; + case DID_BAD_TARGET: + case DID_ABORT: + exit = (DRIVER_INVALID | SUGGEST_ABORT); + break; + case DID_RESET: + if (SCpnt->flags & IS_RESETTING) + { + SCpnt->flags &= ~IS_RESETTING; + status = REDO; + break; + } + + if(msg_byte(result) == GOOD && + status_byte(result) == CHECK_CONDITION) { + switch (check_sense(SCpnt)) { + case 0: + update_timeout(SCpnt, oldto); + status = REDO; + break; + case SUGGEST_REMAP: + case SUGGEST_RETRY: + status = MAYREDO; + exit = DRIVER_SENSE | SUGGEST_RETRY; + break; + case SUGGEST_ABORT: + status = FINISHED; + exit = DRIVER_SENSE | SUGGEST_ABORT; + break; + case SUGGEST_SENSE: + scsi_request_sense (SCpnt); + status = PENDING; + break; + } + } else { + status=REDO; + exit = SUGGEST_RETRY; + } + break; + default : + exit = (DRIVER_ERROR | SUGGEST_DIE); + } + + switch (status) + { + case FINISHED: + case PENDING: + break; + case MAYREDO: +#ifdef DEBUG + printk("In MAYREDO, allowing %d retries, have %d\n", + SCpnt->allowed, SCpnt->retries); +#endif + if ((++SCpnt->retries) < SCpnt->allowed) + { + if ((SCpnt->retries >= (SCpnt->allowed >> 1)) + && !(SCpnt->host->last_reset > 0 && + jiffies < SCpnt->host->last_reset + MIN_RESET_PERIOD) + && !(SCpnt->flags & WAS_RESET)) + { + printk("scsi%d channel %d : resetting for second half of retries.\n", + SCpnt->host->host_no, SCpnt->channel); + scsi_reset(SCpnt, SCSI_RESET_SYNCHRONOUS); + break; + } + + } + else + { + status = FINISHED; + break; + } + /* fall through to REDO */ + + case REDO: + + if (SCpnt->flags & WAS_SENSE) + scsi_request_sense(SCpnt); + else + { + memcpy ((void *) SCpnt->cmnd, + (void*) SCpnt->data_cmnd, + sizeof(SCpnt->data_cmnd)); + SCpnt->request_buffer = SCpnt->buffer; + SCpnt->request_bufflen = SCpnt->bufflen; + SCpnt->use_sg = SCpnt->old_use_sg; + SCpnt->cmd_len = SCpnt->old_cmd_len; + internal_cmnd (SCpnt); + } + break; + default: + INTERNAL_ERROR; + } + + if (status == FINISHED) { +#ifdef DEBUG + printk("Calling done function - at address %p\n", SCpnt->done); +#endif + host->host_busy--; /* Indicate that we are free */ + + if (host->block && host->host_busy == 0) { + host_active = NULL; + + /* For block devices "wake_up" is done in end_scsi_request */ + if (MAJOR(SCpnt->request.rq_dev) != SCSI_DISK_MAJOR && + MAJOR(SCpnt->request.rq_dev) != SCSI_CDROM_MAJOR) { + struct Scsi_Host * next; + + for (next = host->block; next != host; next = next->block) + wake_up(&next->host_wait); + } + + } + + wake_up(&host->host_wait); + SCpnt->result = result | ((exit & 0xff) << 24); + SCpnt->use_sg = SCpnt->old_use_sg; + SCpnt->cmd_len = SCpnt->old_cmd_len; + SCpnt->done (SCpnt); + } + +#undef FINISHED +#undef REDO +#undef MAYREDO +#undef PENDING +} + +/* + * The scsi_abort function interfaces with the abort() function of the host + * we are aborting, and causes the current command to not complete. The + * caller should deal with any error messages or status returned on the + * next call. + * + * This will not be called reentrantly for a given host. + */ + +/* + * Since we're nice guys and specified that abort() and reset() + * can be non-reentrant. The internal_timeout flags are used for + * this. + */ + + +int scsi_abort (Scsi_Cmnd * SCpnt, int why) +{ + int oldto; + unsigned long flags; + struct Scsi_Host * host = SCpnt->host; + + while(1) + { + save_flags(flags); + cli(); + + /* + * Protect against races here. If the command is done, or we are + * on a different command forget it. + */ + if (SCpnt->serial_number != SCpnt->serial_number_at_timeout) { + restore_flags(flags); + return 0; + } + + if (SCpnt->internal_timeout & IN_ABORT) + { + restore_flags(flags); + while (SCpnt->internal_timeout & IN_ABORT) + barrier(); + } + else + { + SCpnt->internal_timeout |= IN_ABORT; + oldto = update_timeout(SCpnt, ABORT_TIMEOUT); + + if ((SCpnt->flags & IS_RESETTING) && SCpnt->device->soft_reset) { + /* OK, this command must have died when we did the + * reset. The device itself must have lied. + */ + printk("Stale command on %d %d:%d appears to have died when" + " the bus was reset\n", + SCpnt->channel, SCpnt->target, SCpnt->lun); + } + + restore_flags(flags); + if (!host->host_busy) { + SCpnt->internal_timeout &= ~IN_ABORT; + update_timeout(SCpnt, oldto); + return 0; + } + printk("scsi : aborting command due to timeout : pid %lu, scsi%d," + " channel %d, id %d, lun %d ", + SCpnt->pid, SCpnt->host->host_no, (int) SCpnt->channel, + (int) SCpnt->target, (int) SCpnt->lun); + print_command (SCpnt->cmnd); + if (SCpnt->serial_number != SCpnt->serial_number_at_timeout) + return 0; + SCpnt->abort_reason = why; + switch(host->hostt->abort(SCpnt)) { + /* We do not know how to abort. Try waiting another + * time increment and see if this helps. Set the + * WAS_TIMEDOUT flag set so we do not try this twice + */ + case SCSI_ABORT_BUSY: /* Tough call - returning 1 from + * this is too severe + */ + case SCSI_ABORT_SNOOZE: + if(why == DID_TIME_OUT) { + save_flags(flags); + cli(); + SCpnt->internal_timeout &= ~IN_ABORT; + if(SCpnt->flags & WAS_TIMEDOUT) { + restore_flags(flags); + return 1; /* Indicate we cannot handle this. + * We drop down into the reset handler + * and try again + */ + } else { + SCpnt->flags |= WAS_TIMEDOUT; + oldto = SCpnt->timeout_per_command; + update_timeout(SCpnt, oldto); + } + restore_flags(flags); + } + return 0; + case SCSI_ABORT_PENDING: + if(why != DID_TIME_OUT) { + save_flags(flags); + cli(); + update_timeout(SCpnt, oldto); + restore_flags(flags); + } + return 0; + case SCSI_ABORT_SUCCESS: + /* We should have already aborted this one. No + * need to adjust timeout + */ + SCpnt->internal_timeout &= ~IN_ABORT; + return 0; + case SCSI_ABORT_NOT_RUNNING: + SCpnt->internal_timeout &= ~IN_ABORT; + update_timeout(SCpnt, 0); + return 0; + case SCSI_ABORT_ERROR: + default: + SCpnt->internal_timeout &= ~IN_ABORT; + return 1; + } + } + } +} + + +/* Mark a single SCSI Device as having been reset. */ + +static inline void scsi_mark_device_reset(Scsi_Device *Device) +{ + Device->was_reset = 1; + Device->expecting_cc_ua = 1; +} + + +/* Mark all SCSI Devices on a specific Host as having been reset. */ + +void scsi_mark_host_reset(struct Scsi_Host *Host) +{ + Scsi_Cmnd *SCpnt; + for (SCpnt = Host->host_queue; SCpnt; SCpnt = SCpnt->next) + scsi_mark_device_reset(SCpnt->device); +} + + +/* Mark all SCSI Devices on a specific Host Bus as having been reset. */ + +void scsi_mark_bus_reset(struct Scsi_Host *Host, int channel) +{ + Scsi_Cmnd *SCpnt; + for (SCpnt = Host->host_queue; SCpnt; SCpnt = SCpnt->next) + if (SCpnt->channel == channel) + scsi_mark_device_reset(SCpnt->device); +} + + +int scsi_reset (Scsi_Cmnd * SCpnt, unsigned int reset_flags) +{ + int temp; + unsigned long flags; + Scsi_Cmnd * SCpnt1; + struct Scsi_Host * host = SCpnt->host; + + printk("SCSI bus is being reset for host %d channel %d.\n", + host->host_no, SCpnt->channel); + +#if 0 + /* + * First of all, we need to make a recommendation to the low-level + * driver as to whether a BUS_DEVICE_RESET should be performed, + * or whether we should do a full BUS_RESET. There is no simple + * algorithm here - we basically use a series of heuristics + * to determine what we should do. + */ + SCpnt->host->suggest_bus_reset = FALSE; + + /* + * First see if all of the active devices on the bus have + * been jammed up so that we are attempting resets. If so, + * then suggest a bus reset. Forcing a bus reset could + * result in some race conditions, but no more than + * you would usually get with timeouts. We will cross + * that bridge when we come to it. + * + * This is actually a pretty bad idea, since a sequence of + * commands will often timeout together and this will cause a + * Bus Device Reset followed immediately by a SCSI Bus Reset. + * If all of the active devices really are jammed up, the + * Bus Device Reset will quickly timeout and scsi_times_out + * will follow up with a SCSI Bus Reset anyway. + */ + SCpnt1 = host->host_queue; + while(SCpnt1) { + if( SCpnt1->request.rq_status != RQ_INACTIVE + && (SCpnt1->flags & (WAS_RESET | IS_RESETTING)) == 0 ) + break; + SCpnt1 = SCpnt1->next; + } + if( SCpnt1 == NULL ) { + reset_flags |= SCSI_RESET_SUGGEST_BUS_RESET; + } + + /* + * If the code that called us is suggesting a hard reset, then + * definitely request it. This usually occurs because a + * BUS_DEVICE_RESET times out. + * + * Passing reset_flags along takes care of this automatically. + */ + if( reset_flags & SCSI_RESET_SUGGEST_BUS_RESET ) { + SCpnt->host->suggest_bus_reset = TRUE; + } +#endif + + while (1) { + save_flags(flags); + cli(); + + /* + * Protect against races here. If the command is done, or we are + * on a different command forget it. + */ + if (reset_flags & SCSI_RESET_ASYNCHRONOUS) + if (SCpnt->serial_number != SCpnt->serial_number_at_timeout) { + restore_flags(flags); + return 0; + } + + if (SCpnt->internal_timeout & IN_RESET) + { + restore_flags(flags); + while (SCpnt->internal_timeout & IN_RESET) + barrier(); + } + else + { + SCpnt->internal_timeout |= IN_RESET; + update_timeout(SCpnt, RESET_TIMEOUT); + + if (host->host_busy) + { + restore_flags(flags); + SCpnt1 = host->host_queue; + while(SCpnt1) { + if (SCpnt1->request.rq_status != RQ_INACTIVE) { +#if 0 + if (!(SCpnt1->flags & IS_RESETTING) && + !(SCpnt1->internal_timeout & IN_ABORT)) + scsi_abort(SCpnt1, DID_RESET); +#endif + SCpnt1->flags |= (WAS_RESET | IS_RESETTING); + } + SCpnt1 = SCpnt1->next; + } + + host->last_reset = jiffies; + temp = host->hostt->reset(SCpnt, reset_flags); + /* + This test allows the driver to introduce an additional bus + settle time delay by setting last_reset up to 20 seconds in + the future. In the normal case where the driver does not + modify last_reset, it must be assumed that the actual bus + reset occurred immediately prior to the return to this code, + and so last_reset must be updated to the current time, so + that the delay in internal_cmnd will guarantee at least a + MIN_RESET_DELAY bus settle time. + */ + if ((host->last_reset < jiffies) || + (host->last_reset > (jiffies + 20 * HZ))) + host->last_reset = jiffies; + } + else + { + if (!host->block) host->host_busy++; + restore_flags(flags); + host->last_reset = jiffies; + SCpnt->flags |= (WAS_RESET | IS_RESETTING); + temp = host->hostt->reset(SCpnt, reset_flags); + if ((host->last_reset < jiffies) || + (host->last_reset > (jiffies + 20 * HZ))) + host->last_reset = jiffies; + if (!host->block) host->host_busy--; + } + +#ifdef DEBUG + printk("scsi reset function returned %d\n", temp); +#endif + + /* + * Now figure out what we need to do, based upon + * what the low level driver said that it did. + * If the result is SCSI_RESET_SUCCESS, SCSI_RESET_PENDING, + * or SCSI_RESET_WAKEUP, then the low level driver did a + * bus device reset or bus reset, so we should go through + * and mark one or all of the devices on that bus + * as having been reset. + */ + switch(temp & SCSI_RESET_ACTION) { + case SCSI_RESET_SUCCESS: + if (temp & SCSI_RESET_HOST_RESET) + scsi_mark_host_reset(host); + else if (temp & SCSI_RESET_BUS_RESET) + scsi_mark_bus_reset(host, SCpnt->channel); + else scsi_mark_device_reset(SCpnt->device); + save_flags(flags); + cli(); + SCpnt->internal_timeout &= ~(IN_RESET|IN_RESET2|IN_RESET3); + restore_flags(flags); + return 0; + case SCSI_RESET_PENDING: + if (temp & SCSI_RESET_HOST_RESET) + scsi_mark_host_reset(host); + else if (temp & SCSI_RESET_BUS_RESET) + scsi_mark_bus_reset(host, SCpnt->channel); + else scsi_mark_device_reset(SCpnt->device); + case SCSI_RESET_NOT_RUNNING: + return 0; + case SCSI_RESET_PUNT: + SCpnt->internal_timeout &= ~(IN_RESET|IN_RESET2|IN_RESET3); + scsi_request_sense (SCpnt); + return 0; + case SCSI_RESET_WAKEUP: + if (temp & SCSI_RESET_HOST_RESET) + scsi_mark_host_reset(host); + else if (temp & SCSI_RESET_BUS_RESET) + scsi_mark_bus_reset(host, SCpnt->channel); + else scsi_mark_device_reset(SCpnt->device); + SCpnt->internal_timeout &= ~(IN_RESET|IN_RESET2|IN_RESET3); + scsi_request_sense (SCpnt); + /* + * If a bus reset was performed, we + * need to wake up each and every command + * that was active on the bus or if it was a HBA + * reset all active commands on all channels + */ + if( temp & SCSI_RESET_HOST_RESET ) + { + SCpnt1 = host->host_queue; + while(SCpnt1) { + if (SCpnt1->request.rq_status != RQ_INACTIVE + && SCpnt1 != SCpnt) + scsi_request_sense (SCpnt1); + SCpnt1 = SCpnt1->next; + } + } else if( temp & SCSI_RESET_BUS_RESET ) { + SCpnt1 = host->host_queue; + while(SCpnt1) { + if(SCpnt1->request.rq_status != RQ_INACTIVE + && SCpnt1 != SCpnt + && SCpnt1->channel == SCpnt->channel) + scsi_request_sense (SCpnt); + SCpnt1 = SCpnt1->next; + } + } + return 0; + case SCSI_RESET_SNOOZE: + /* In this case, we set the timeout field to 0 + * so that this command does not time out any more, + * and we return 1 so that we get a message on the + * screen. + */ + save_flags(flags); + cli(); + SCpnt->internal_timeout &= ~(IN_RESET|IN_RESET2|IN_RESET3); + update_timeout(SCpnt, 0); + restore_flags(flags); + /* If you snooze, you lose... */ + case SCSI_RESET_ERROR: + default: + return 1; + } + + return temp; + } + } +} + + +static void scsi_main_timeout(void) +{ + /* + * We must not enter update_timeout with a timeout condition still pending. + */ + + int timed_out; + unsigned long flags; + struct Scsi_Host * host; + Scsi_Cmnd * SCpnt = NULL; + + save_flags(flags); + cli(); + + update_timeout(NULL, 0); + + /* + * Find all timers such that they have 0 or negative (shouldn't happen) + * time remaining on them. + */ + timed_out = 0; + for (host = scsi_hostlist; host; host = host->next) { + for (SCpnt = host->host_queue; SCpnt; SCpnt = SCpnt->next) + if (SCpnt->timeout == -1) + { + SCpnt->timeout = 0; + SCpnt->serial_number_at_timeout = SCpnt->serial_number; + ++timed_out; + } + } + if (timed_out > 0) { + for (host = scsi_hostlist; host; host = host->next) { + for (SCpnt = host->host_queue; SCpnt; SCpnt = SCpnt->next) + if (SCpnt->serial_number_at_timeout > 0 && + SCpnt->serial_number_at_timeout == SCpnt->serial_number) + { + restore_flags(flags); + scsi_times_out(SCpnt); + SCpnt->serial_number_at_timeout = 0; + cli(); + } + } + } + restore_flags(flags); +} + +/* + * The strategy is to cause the timer code to call scsi_times_out() + * when the soonest timeout is pending. + * The arguments are used when we are queueing a new command, because + * we do not want to subtract the time used from this time, but when we + * set the timer, we want to take this value into account. + */ + +static int update_timeout(Scsi_Cmnd * SCset, int timeout) +{ + unsigned int least, used; + unsigned int oldto; + unsigned long flags; + struct Scsi_Host * host; + Scsi_Cmnd * SCpnt = NULL; + + save_flags(flags); + cli(); + + oldto = 0; + + /* + * This routine can be a performance bottleneck under high loads, since + * it is called twice per SCSI operation: once when internal_cmnd is + * called, and again when scsi_done completes the command. To limit + * the load this routine can cause, we shortcut processing if no clock + * ticks have occurred since the last time it was called. + */ + + if (jiffies == time_start && timer_table[SCSI_TIMER].expires > 0) { + if(SCset){ + oldto = SCset->timeout; + SCset->timeout = timeout; + if (timeout > 0 && + jiffies + timeout < timer_table[SCSI_TIMER].expires) + timer_table[SCSI_TIMER].expires = jiffies + timeout; + } + restore_flags(flags); + return oldto; + } + + /* + * Figure out how much time has passed since the last time the timeouts + * were updated + */ + used = (time_start) ? (jiffies - time_start) : 0; + + /* + * Find out what is due to timeout soonest, and adjust all timeouts for + * the amount of time that has passed since the last time we called + * update_timeout. + */ + + oldto = 0; + + if(SCset){ + oldto = SCset->timeout - used; + SCset->timeout = timeout; + } + + least = 0xffffffff; + + for(host = scsi_hostlist; host; host = host->next) + for(SCpnt = host->host_queue; SCpnt; SCpnt = SCpnt->next) + if (SCpnt->timeout > 0) { + if (SCpnt != SCset) + SCpnt->timeout -= used; + if(SCpnt->timeout <= 0) SCpnt->timeout = -1; + if(SCpnt->timeout > 0 && SCpnt->timeout < least) + least = SCpnt->timeout; + } + + /* + * If something is due to timeout again, then we will set the next timeout + * interrupt to occur. Otherwise, timeouts are disabled. + */ + + if (least != 0xffffffff) + { + time_start = jiffies; + timer_table[SCSI_TIMER].expires = (time_elapsed = least) + jiffies; + timer_active |= 1 << SCSI_TIMER; + } + else + { + timer_table[SCSI_TIMER].expires = time_start = time_elapsed = 0; + timer_active &= ~(1 << SCSI_TIMER); + } + restore_flags(flags); + return oldto; +} + +#ifdef CONFIG_MODULES +static int scsi_register_host(Scsi_Host_Template *); +static void scsi_unregister_host(Scsi_Host_Template *); +#endif + +void *scsi_malloc(unsigned int len) +{ + unsigned int nbits, mask; + unsigned long flags; + int i, j; + if(len % SECTOR_SIZE != 0 || len > PAGE_SIZE) + return NULL; + + save_flags(flags); + cli(); + nbits = len >> 9; + mask = (1 << nbits) - 1; + + for(i=0;i < dma_sectors / SECTORS_PER_PAGE; i++) + for(j=0; j<=SECTORS_PER_PAGE - nbits; j++){ + if ((dma_malloc_freelist[i] & (mask << j)) == 0){ + dma_malloc_freelist[i] |= (mask << j); + restore_flags(flags); + dma_free_sectors -= nbits; +#ifdef DEBUG + printk("SMalloc: %d %p\n",len, dma_malloc_pages[i] + (j << 9)); +#endif + return (void *) ((unsigned long) dma_malloc_pages[i] + (j << 9)); + } + } + restore_flags(flags); + return NULL; /* Nope. No more */ +} + +int scsi_free(void *obj, unsigned int len) +{ + unsigned int page, sector, nbits, mask; + unsigned long flags; + +#ifdef DEBUG + unsigned long ret = 0; + +#ifdef __mips__ + __asm__ __volatile__ ("move\t%0,$31":"=r"(ret)); +#else + ret = __builtin_return_address(0); +#endif + printk("scsi_free %p %d\n",obj, len); +#endif + + for (page = 0; page < dma_sectors / SECTORS_PER_PAGE; page++) { + unsigned long page_addr = (unsigned long) dma_malloc_pages[page]; + if ((unsigned long) obj >= page_addr && + (unsigned long) obj < page_addr + PAGE_SIZE) + { + sector = (((unsigned long) obj) - page_addr) >> 9; + + nbits = len >> 9; + mask = (1 << nbits) - 1; + + if ((mask << sector) >= (1 << SECTORS_PER_PAGE)) + panic ("scsi_free:Bad memory alignment"); + + save_flags(flags); + cli(); + if((dma_malloc_freelist[page] & + (mask << sector)) != (mask<<sector)){ +#ifdef DEBUG + printk("scsi_free(obj=%p, len=%d) called from %08lx\n", + obj, len, ret); +#endif + panic("scsi_free:Trying to free unused memory"); + } + dma_free_sectors += nbits; + dma_malloc_freelist[page] &= ~(mask << sector); + restore_flags(flags); + return 0; + } + } + panic("scsi_free:Bad offset"); +} + + +int scsi_loadable_module_flag; /* Set after we scan builtin drivers */ + +void * scsi_init_malloc(unsigned int size, int priority) +{ + void * retval; + + /* + * For buffers used by the DMA pool, we assume page aligned + * structures. + */ + if ((size % PAGE_SIZE) == 0) { + int order, a_size; + for (order = 0, a_size = PAGE_SIZE; + a_size < size; order++, a_size <<= 1) + ; + retval = (void *) __get_dma_pages(priority & GFP_LEVEL_MASK, + order); + } else + retval = kmalloc(size, priority); + + if (retval) + memset(retval, 0, size); + return retval; +} + + +void scsi_init_free(char * ptr, unsigned int size) +{ + /* + * We need this special code here because the DMA pool assumes + * page aligned data. Besides, it is wasteful to allocate + * page sized chunks with kmalloc. + */ + if ((size % PAGE_SIZE) == 0) { + int order, a_size; + + for (order = 0, a_size = PAGE_SIZE; + a_size < size; order++, a_size <<= 1) + ; + free_pages((unsigned long)ptr, order); + } else + kfree(ptr); +} + +void scsi_build_commandblocks(Scsi_Device * SDpnt) +{ + struct Scsi_Host *host = SDpnt->host; + int j; + Scsi_Cmnd * SCpnt; + + if (SDpnt->queue_depth == 0) + SDpnt->queue_depth = host->cmd_per_lun; + SDpnt->device_queue = NULL; + + for(j=0;j<SDpnt->queue_depth;j++){ + SCpnt = (Scsi_Cmnd *) + scsi_init_malloc(sizeof(Scsi_Cmnd), + GFP_ATOMIC | + (host->unchecked_isa_dma ? GFP_DMA : 0)); + SCpnt->host = host; + SCpnt->device = SDpnt; + SCpnt->target = SDpnt->id; + SCpnt->lun = SDpnt->lun; + SCpnt->channel = SDpnt->channel; + SCpnt->request.rq_status = RQ_INACTIVE; + SCpnt->use_sg = 0; + SCpnt->old_use_sg = 0; + SCpnt->old_cmd_len = 0; + SCpnt->timeout = 0; + SCpnt->underflow = 0; + SCpnt->transfersize = 0; + SCpnt->serial_number = 0; + SCpnt->serial_number_at_timeout = 0; + SCpnt->host_scribble = NULL; + if(host->host_queue) + host->host_queue->prev = SCpnt; + SCpnt->next = host->host_queue; + SCpnt->prev = NULL; + host->host_queue = SCpnt; + SCpnt->device_next = SDpnt->device_queue; + SDpnt->device_queue = SCpnt; + } + SDpnt->has_cmdblocks = 1; +} + +/* + * scsi_dev_init() is our initialization routine, which in turn calls host + * initialization, bus scanning, and sd/st initialization routines. + */ + +int scsi_dev_init(void) +{ + Scsi_Device * SDpnt; + struct Scsi_Host * shpnt; + struct Scsi_Device_Template * sdtpnt; +#ifdef FOO_ON_YOU + return; +#endif + + /* Yes we're here... */ +#if CONFIG_PROC_FS + dispatch_scsi_info_ptr = dispatch_scsi_info; +#endif + + /* Init a few things so we can "malloc" memory. */ + scsi_loadable_module_flag = 0; + + timer_table[SCSI_TIMER].fn = scsi_main_timeout; + timer_table[SCSI_TIMER].expires = 0; + +#ifdef CONFIG_MODULES + register_symtab(&scsi_symbol_table); +#endif + + /* Register the /proc/scsi/scsi entry */ +#if CONFIG_PROC_FS + proc_scsi_register(0, &proc_scsi_scsi); +#endif + + /* initialize all hosts */ + scsi_init(); + + scsi_devices = (Scsi_Device *) NULL; + + for (shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) { + scan_scsis(shpnt,0,0,0,0); /* scan for scsi devices */ + if (shpnt->select_queue_depths != NULL) + (shpnt->select_queue_depths)(shpnt, scsi_devices); + } + + printk("scsi : detected "); + for (sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if (sdtpnt->dev_noticed && sdtpnt->name) + printk("%d SCSI %s%s ", sdtpnt->dev_noticed, sdtpnt->name, + (sdtpnt->dev_noticed != 1) ? "s" : ""); + printk("total.\n"); + + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->init && sdtpnt->dev_noticed) (*sdtpnt->init)(); + + for (SDpnt=scsi_devices; SDpnt; SDpnt = SDpnt->next) { + SDpnt->scsi_request_fn = NULL; + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->attach) (*sdtpnt->attach)(SDpnt); + if(SDpnt->attached) scsi_build_commandblocks(SDpnt); + } + + + /* + * This should build the DMA pool. + */ + resize_dma_pool(); + + /* + * OK, now we finish the initialization by doing spin-up, read + * capacity, etc, etc + */ + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->finish && sdtpnt->nr_dev) + (*sdtpnt->finish)(); + + scsi_loadable_module_flag = 1; + + return 0; +} + +static void print_inquiry(unsigned char *data) +{ + int i; + + printk(" Vendor: "); + for (i = 8; i < 16; i++) + { + if (data[i] >= 0x20 && i < data[4] + 5) + printk("%c", data[i]); + else + printk(" "); + } + + printk(" Model: "); + for (i = 16; i < 32; i++) + { + if (data[i] >= 0x20 && i < data[4] + 5) + printk("%c", data[i]); + else + printk(" "); + } + + printk(" Rev: "); + for (i = 32; i < 36; i++) + { + if (data[i] >= 0x20 && i < data[4] + 5) + printk("%c", data[i]); + else + printk(" "); + } + + printk("\n"); + + i = data[0] & 0x1f; + + printk(" Type: %s ", + i < MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] : "Unknown " ); + printk(" ANSI SCSI revision: %02x", data[2] & 0x07); + if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1) + printk(" CCS\n"); + else + printk("\n"); +} + + +#ifdef CONFIG_PROC_FS +int scsi_proc_info(char *buffer, char **start, off_t offset, int length, + int hostno, int inout) +{ + Scsi_Cmnd *SCpnt; + struct Scsi_Device_Template *SDTpnt; + Scsi_Device *scd, *scd_h = NULL; + struct Scsi_Host *HBA_ptr; + char *p; + int host, channel, id, lun; + int size, len = 0; + off_t begin = 0; + off_t pos = 0; + + scd = scsi_devices; + HBA_ptr = scsi_hostlist; + + if(inout == 0) { + size = sprintf(buffer+len,"Attached devices: %s\n", (scd)?"":"none"); + len += size; + pos = begin + len; + while (HBA_ptr) { +#if 0 + size += sprintf(buffer+len,"scsi%2d: %s\n", (int) HBA_ptr->host_no, + HBA_ptr->hostt->procname); + len += size; + pos = begin + len; +#endif + scd = scsi_devices; + while (scd) { + if (scd->host == HBA_ptr) { + proc_print_scsidevice(scd, buffer, &size, len); + len += size; + pos = begin + len; + + if (pos < offset) { + len = 0; + begin = pos; + } + if (pos > offset + length) + goto stop_output; + } + scd = scd->next; + } + HBA_ptr = HBA_ptr->next; + } + + stop_output: + *start=buffer+(offset-begin); /* Start of wanted data */ + len-=(offset-begin); /* Start slop */ + if(len>length) + len = length; /* Ending slop */ + return (len); + } + + if(!buffer || length < 25 || strncmp("scsi", buffer, 4)) + return(-EINVAL); + + /* + * Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi + * with "0 1 2 3" replaced by your "Host Channel Id Lun". + * Consider this feature BETA. + * CAUTION: This is not for hotplugging your peripherals. As + * SCSI was not designed for this you could damage your + * hardware ! + * However perhaps it is legal to switch on an + * already connected device. It is perhaps not + * guaranteed this device doesn't corrupt an ongoing data transfer. + */ + if(!strncmp("add-single-device", buffer + 5, 17)) { + p = buffer + 23; + + host = simple_strtoul(p, &p, 0); + channel = simple_strtoul(p+1, &p, 0); + id = simple_strtoul(p+1, &p, 0); + lun = simple_strtoul(p+1, &p, 0); + + printk("scsi singledevice %d %d %d %d\n", host, channel, + id, lun); + + while(scd && (scd->host->host_no != host + || scd->channel != channel + || scd->id != id + || scd->lun != lun)) { + scd = scd->next; + } + if(scd) + return(-ENOSYS); /* We do not yet support unplugging */ + while(HBA_ptr && HBA_ptr->host_no != host) + HBA_ptr = HBA_ptr->next; + + if(!HBA_ptr) + return(-ENXIO); + + scan_scsis (HBA_ptr, 1, channel, id, lun); + return(length); + + } + + /* + * Usage: echo "scsi remove-single-device 0 1 2 3" >/proc/scsi/scsi + * with "0 1 2 3" replaced by your "Host Channel Id Lun". + * + * Consider this feature pre-BETA. + * + * CAUTION: This is not for hotplugging your peripherals. As + * SCSI was not designed for this you could damage your + * hardware and thoroughly confuse the SCSI subsystem. + * + */ + else if(!strncmp("remove-single-device", buffer + 5, 20)) { + p = buffer + 26; + + host = simple_strtoul(p, &p, 0); + channel = simple_strtoul(p+1, &p, 0); + id = simple_strtoul(p+1, &p, 0); + lun = simple_strtoul(p+1, &p, 0); + + while(scd != NULL) { + if(scd->host->host_no == host + && scd->channel == channel + && scd->id == id + && scd->lun == lun){ + break; + } + scd_h = scd; + scd = scd->next; + } + + if(scd == NULL) + return(-ENODEV); /* there is no such device attached */ + + if(scd->access_count) + return(-EBUSY); + + SDTpnt = scsi_devicelist; + while(SDTpnt != NULL) { + if(SDTpnt->detach) (*SDTpnt->detach)(scd); + SDTpnt = SDTpnt->next; + } + + if(scd->attached == 0) { + /* + * Nobody is using this device any more. + * Free all of the command structures. + */ + for(SCpnt=scd->host->host_queue; SCpnt; SCpnt = SCpnt->next){ + if(SCpnt->device == scd) { + if(SCpnt->prev != NULL) + SCpnt->prev->next = SCpnt->next; + if(SCpnt->next != NULL) + SCpnt->next->prev = SCpnt->prev; + if(SCpnt == scd->host->host_queue) + scd->host->host_queue = SCpnt->next; + scsi_init_free((char *) SCpnt, sizeof(*SCpnt)); + } + } + /* Now we can remove the device structure */ + if(scd_h != NULL) { + scd_h->next = scd->next; + } else if (scsi_devices == scd) { + /* We had a hit on the first entry of the device list */ + scsi_devices = scd->next; + } + scsi_init_free((char *) scd, sizeof(Scsi_Device)); + } else { + return(-EBUSY); + } + return(0); + } + return(-EINVAL); +} +#endif + +/* + * Go through the device list and recompute the most appropriate size + * for the dma pool. Then grab more memory (as required). + */ +static void resize_dma_pool(void) +{ + int i; + unsigned long size; + struct Scsi_Host * shpnt; + struct Scsi_Host * host = NULL; + Scsi_Device * SDpnt; + unsigned long flags; + FreeSectorBitmap * new_dma_malloc_freelist = NULL; + unsigned int new_dma_sectors = 0; + unsigned int new_need_isa_buffer = 0; + unsigned char ** new_dma_malloc_pages = NULL; + + if( !scsi_devices ) + { + /* + * Free up the DMA pool. + */ + if( dma_free_sectors != dma_sectors ) + panic("SCSI DMA pool memory leak %d %d\n",dma_free_sectors,dma_sectors); + + for(i=0; i < dma_sectors / SECTORS_PER_PAGE; i++) + scsi_init_free(dma_malloc_pages[i], PAGE_SIZE); + if (dma_malloc_pages) + scsi_init_free((char *) dma_malloc_pages, + (dma_sectors / SECTORS_PER_PAGE)*sizeof(*dma_malloc_pages)); + dma_malloc_pages = NULL; + if (dma_malloc_freelist) + scsi_init_free((char *) dma_malloc_freelist, + (dma_sectors / SECTORS_PER_PAGE)*sizeof(*dma_malloc_freelist)); + dma_malloc_freelist = NULL; + dma_sectors = 0; + dma_free_sectors = 0; + return; + } + /* Next, check to see if we need to extend the DMA buffer pool */ + + new_dma_sectors = 2*SECTORS_PER_PAGE; /* Base value we use */ + + if (high_memory-1 > ISA_DMA_THRESHOLD) + scsi_need_isa_bounce_buffers = 1; + else + scsi_need_isa_bounce_buffers = 0; + + if (scsi_devicelist) + for(shpnt=scsi_hostlist; shpnt; shpnt = shpnt->next) + new_dma_sectors += SECTORS_PER_PAGE; /* Increment for each host */ + + for (SDpnt=scsi_devices; SDpnt; SDpnt = SDpnt->next) { + host = SDpnt->host; + + /* + * sd and sr drivers allocate scatterlists. + * sr drivers may allocate for each command 1x2048 or 2x1024 extra + * buffers for 2k sector size and 1k fs. + * sg driver allocates buffers < 4k. + * st driver does not need buffers from the dma pool. + * estimate 4k buffer/command for devices of unknown type (should panic). + */ + if (SDpnt->type == TYPE_WORM || SDpnt->type == TYPE_ROM || + SDpnt->type == TYPE_DISK || SDpnt->type == TYPE_MOD) { + new_dma_sectors += ((host->sg_tablesize * + sizeof(struct scatterlist) + 511) >> 9) * + SDpnt->queue_depth; + if (SDpnt->type == TYPE_WORM || SDpnt->type == TYPE_ROM) + new_dma_sectors += (2048 >> 9) * SDpnt->queue_depth; + } + else if (SDpnt->type == TYPE_SCANNER || + SDpnt->type == TYPE_PROCESSOR || + SDpnt->type == TYPE_MEDIUM_CHANGER) { + new_dma_sectors += (4096 >> 9) * SDpnt->queue_depth; + } + else { + if (SDpnt->type != TYPE_TAPE) { + printk("resize_dma_pool: unknown device type %d\n", SDpnt->type); + new_dma_sectors += (4096 >> 9) * SDpnt->queue_depth; + } + } + + if(host->unchecked_isa_dma && + scsi_need_isa_bounce_buffers && + SDpnt->type != TYPE_TAPE) { + new_dma_sectors += (PAGE_SIZE >> 9) * host->sg_tablesize * + SDpnt->queue_depth; + new_need_isa_buffer++; + } + } + +#ifdef DEBUG_INIT + printk("resize_dma_pool: needed dma sectors = %d\n", new_dma_sectors); +#endif + + /* limit DMA memory to 32MB: */ + new_dma_sectors = (new_dma_sectors + 15) & 0xfff0; + + /* + * We never shrink the buffers - this leads to + * race conditions that I would rather not even think + * about right now. + */ + if( new_dma_sectors < dma_sectors ) + new_dma_sectors = dma_sectors; + + if (new_dma_sectors) + { + size = (new_dma_sectors / SECTORS_PER_PAGE)*sizeof(FreeSectorBitmap); + new_dma_malloc_freelist = (FreeSectorBitmap *) scsi_init_malloc(size, GFP_ATOMIC); + memset(new_dma_malloc_freelist, 0, size); + + size = (new_dma_sectors / SECTORS_PER_PAGE)*sizeof(*new_dma_malloc_pages); + new_dma_malloc_pages = (unsigned char **) scsi_init_malloc(size, GFP_ATOMIC); + memset(new_dma_malloc_pages, 0, size); + } + + /* + * If we need more buffers, expand the list. + */ + if( new_dma_sectors > dma_sectors ) { + for(i=dma_sectors / SECTORS_PER_PAGE; i< new_dma_sectors / SECTORS_PER_PAGE; i++) + new_dma_malloc_pages[i] = (unsigned char *) + scsi_init_malloc(PAGE_SIZE, GFP_ATOMIC | GFP_DMA); + } + + /* When we dick with the actual DMA list, we need to + * protect things + */ + save_flags(flags); + cli(); + if (dma_malloc_freelist) + { + size = (dma_sectors / SECTORS_PER_PAGE)*sizeof(FreeSectorBitmap); + memcpy(new_dma_malloc_freelist, dma_malloc_freelist, size); + scsi_init_free((char *) dma_malloc_freelist, size); + } + dma_malloc_freelist = new_dma_malloc_freelist; + + if (dma_malloc_pages) + { + size = (dma_sectors / SECTORS_PER_PAGE)*sizeof(*dma_malloc_pages); + memcpy(new_dma_malloc_pages, dma_malloc_pages, size); + scsi_init_free((char *) dma_malloc_pages, size); + } + + dma_free_sectors += new_dma_sectors - dma_sectors; + dma_malloc_pages = new_dma_malloc_pages; + dma_sectors = new_dma_sectors; + need_isa_buffer = new_need_isa_buffer; + restore_flags(flags); + +#ifdef DEBUG_INIT + printk("resize_dma_pool: dma free sectors = %d\n", dma_free_sectors); + printk("resize_dma_pool: dma sectors = %d\n", dma_sectors); + printk("resize_dma_pool: need isa buffers = %d\n", need_isa_buffer); +#endif +} + +#ifdef CONFIG_MODULES /* a big #ifdef block... */ + +/* + * This entry point should be called by a loadable module if it is trying + * add a low level scsi driver to the system. + */ +static int scsi_register_host(Scsi_Host_Template * tpnt) +{ + int pcount; + struct Scsi_Host * shpnt; + Scsi_Device * SDpnt; + struct Scsi_Device_Template * sdtpnt; + const char * name; + + if (tpnt->next || !tpnt->detect) return 1;/* Must be already loaded, or + * no detect routine available + */ + pcount = next_scsi_host; + if ((tpnt->present = tpnt->detect(tpnt))) + { + if(pcount == next_scsi_host) { + if(tpnt->present > 1) { + printk("Failure to register low-level scsi driver"); + scsi_unregister_host(tpnt); + return 1; + } + /* The low-level driver failed to register a driver. We + * can do this now. + */ + scsi_register(tpnt,0); + } + tpnt->next = scsi_hosts; /* Add to the linked list */ + scsi_hosts = tpnt; + + /* Add the new driver to /proc/scsi */ +#if CONFIG_PROC_FS + build_proc_dir_entries(tpnt); +#endif + + for(shpnt=scsi_hostlist; shpnt; shpnt = shpnt->next) + if(shpnt->hostt == tpnt) + { + if(tpnt->info) + name = tpnt->info(shpnt); + else + name = tpnt->name; + printk ("scsi%d : %s\n", /* And print a little message */ + shpnt->host_no, name); + } + + printk ("scsi : %d host%s.\n", next_scsi_host, + (next_scsi_host == 1) ? "" : "s"); + + scsi_make_blocked_list(); + + /* The next step is to call scan_scsis here. This generates the + * Scsi_Devices entries + */ + + for(shpnt=scsi_hostlist; shpnt; shpnt = shpnt->next) + if(shpnt->hostt == tpnt) { + scan_scsis(shpnt,0,0,0,0); + if (shpnt->select_queue_depths != NULL) + (shpnt->select_queue_depths)(shpnt, scsi_devices); + } + + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->init && sdtpnt->dev_noticed) (*sdtpnt->init)(); + + /* Next we create the Scsi_Cmnd structures for this host */ + + for(SDpnt = scsi_devices; SDpnt; SDpnt = SDpnt->next) + if(SDpnt->host->hostt == tpnt) + { + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->attach) (*sdtpnt->attach)(SDpnt); + if(SDpnt->attached) scsi_build_commandblocks(SDpnt); + } + + /* + * Now that we have all of the devices, resize the DMA pool, + * as required. */ + resize_dma_pool(); + + + /* This does any final handling that is required. */ + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->finish && sdtpnt->nr_dev) + (*sdtpnt->finish)(); + } + +#if defined(USE_STATIC_SCSI_MEMORY) + printk ("SCSI memory: total %ldKb, used %ldKb, free %ldKb.\n", + (scsi_memory_upper_value - scsi_memory_lower_value) / 1024, + (scsi_init_memory_start - scsi_memory_lower_value) / 1024, + (scsi_memory_upper_value - scsi_init_memory_start) / 1024); +#endif + + MOD_INC_USE_COUNT; + return 0; +} + +/* + * Similarly, this entry point should be called by a loadable module if it + * is trying to remove a low level scsi driver from the system. + */ +static void scsi_unregister_host(Scsi_Host_Template * tpnt) +{ + Scsi_Host_Template * SHT, *SHTp; + Scsi_Device *sdpnt, * sdppnt, * sdpnt1; + Scsi_Cmnd * SCpnt; + unsigned long flags; + struct Scsi_Device_Template * sdtpnt; + struct Scsi_Host * shpnt, *sh1; + int pcount; + + /* First verify that this host adapter is completely free with no pending + * commands */ + + for(sdpnt = scsi_devices; sdpnt; sdpnt = sdpnt->next) + if(sdpnt->host->hostt == tpnt && sdpnt->host->hostt->usage_count + && *sdpnt->host->hostt->usage_count) return; + + for(shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) + { + if (shpnt->hostt != tpnt) continue; + for(SCpnt = shpnt->host_queue; SCpnt; SCpnt = SCpnt->next) + { + save_flags(flags); + cli(); + if(SCpnt->request.rq_status != RQ_INACTIVE) { + restore_flags(flags); + for(SCpnt = shpnt->host_queue; SCpnt; SCpnt = SCpnt->next) + if(SCpnt->request.rq_status == RQ_SCSI_DISCONNECTING) + SCpnt->request.rq_status = RQ_INACTIVE; + printk("Device busy???\n"); + return; + } + SCpnt->request.rq_status = RQ_SCSI_DISCONNECTING; /* Mark as busy */ + restore_flags(flags); + } + } + /* Next we detach the high level drivers from the Scsi_Device structures */ + + for(sdpnt = scsi_devices; sdpnt; sdpnt = sdpnt->next) + if(sdpnt->host->hostt == tpnt) + { + for(sdtpnt = scsi_devicelist; sdtpnt; sdtpnt = sdtpnt->next) + if(sdtpnt->detach) (*sdtpnt->detach)(sdpnt); + /* If something still attached, punt */ + if (sdpnt->attached) { + printk("Attached usage count = %d\n", sdpnt->attached); + return; + } + } + + /* Next we free up the Scsi_Cmnd structures for this host */ + + for(sdpnt = scsi_devices; sdpnt; sdpnt = sdpnt->next) + if(sdpnt->host->hostt == tpnt) + while (sdpnt->host->host_queue) { + SCpnt = sdpnt->host->host_queue->next; + scsi_init_free((char *) sdpnt->host->host_queue, sizeof(Scsi_Cmnd)); + sdpnt->host->host_queue = SCpnt; + if (SCpnt) SCpnt->prev = NULL; + sdpnt->has_cmdblocks = 0; + } + + /* Next free up the Scsi_Device structures for this host */ + + sdppnt = NULL; + for(sdpnt = scsi_devices; sdpnt; sdpnt = sdpnt1) + { + sdpnt1 = sdpnt->next; + if (sdpnt->host->hostt == tpnt) { + if (sdppnt) + sdppnt->next = sdpnt->next; + else + scsi_devices = sdpnt->next; + scsi_init_free((char *) sdpnt, sizeof (Scsi_Device)); + } else + sdppnt = sdpnt; + } + + /* Next we go through and remove the instances of the individual hosts + * that were detected */ + + shpnt = scsi_hostlist; + while(shpnt) { + sh1 = shpnt->next; + if(shpnt->hostt == tpnt) { + if(shpnt->loaded_as_module) { + pcount = next_scsi_host; + /* Remove the /proc/scsi directory entry */ +#if CONFIG_PROC_FS + proc_scsi_unregister(tpnt->proc_dir, + shpnt->host_no + PROC_SCSI_FILE); +#endif + if(tpnt->release) + (*tpnt->release)(shpnt); + else { + /* This is the default case for the release function. + * It should do the right thing for most correctly + * written host adapters. + */ + if (shpnt->irq) free_irq(shpnt->irq, NULL); + if (shpnt->dma_channel != 0xff) free_dma(shpnt->dma_channel); + if (shpnt->io_port && shpnt->n_io_port) + release_region(shpnt->io_port, shpnt->n_io_port); + } + if(pcount == next_scsi_host) scsi_unregister(shpnt); + tpnt->present--; + } + } + shpnt = sh1; + } + + /* + * If there are absolutely no more hosts left, it is safe + * to completely nuke the DMA pool. The resize operation will + * do the right thing and free everything. + */ + if( !scsi_devices ) + resize_dma_pool(); + + printk ("scsi : %d host%s.\n", next_scsi_host, + (next_scsi_host == 1) ? "" : "s"); + +#if defined(USE_STATIC_SCSI_MEMORY) + printk ("SCSI memory: total %ldKb, used %ldKb, free %ldKb.\n", + (scsi_memory_upper_value - scsi_memory_lower_value) / 1024, + (scsi_init_memory_start - scsi_memory_lower_value) / 1024, + (scsi_memory_upper_value - scsi_init_memory_start) / 1024); +#endif + + scsi_make_blocked_list(); + + /* There were some hosts that were loaded at boot time, so we cannot + do any more than this */ + if (tpnt->present) return; + + /* OK, this is the very last step. Remove this host adapter from the + linked list. */ + for(SHTp=NULL, SHT=scsi_hosts; SHT; SHTp=SHT, SHT=SHT->next) + if(SHT == tpnt) { + if(SHTp) + SHTp->next = SHT->next; + else + scsi_hosts = SHT->next; + SHT->next = NULL; + break; + } + + /* Rebuild the /proc/scsi directory entries */ +#if CONFIG_PROC_FS + proc_scsi_unregister(tpnt->proc_dir, tpnt->proc_dir->low_ino); +#endif + MOD_DEC_USE_COUNT; +} + +/* + * This entry point should be called by a loadable module if it is trying + * add a high level scsi driver to the system. + */ +static int scsi_register_device_module(struct Scsi_Device_Template * tpnt) +{ + Scsi_Device * SDpnt; + + if (tpnt->next) return 1; + + scsi_register_device(tpnt); + /* + * First scan the devices that we know about, and see if we notice them. + */ + + for(SDpnt = scsi_devices; SDpnt; SDpnt = SDpnt->next) + if(tpnt->detect) SDpnt->attached += (*tpnt->detect)(SDpnt); + + /* + * If any of the devices would match this driver, then perform the + * init function. + */ + if(tpnt->init && tpnt->dev_noticed) + if ((*tpnt->init)()) return 1; + + /* + * Now actually connect the devices to the new driver. + */ + for(SDpnt = scsi_devices; SDpnt; SDpnt = SDpnt->next) + { + if(tpnt->attach) (*tpnt->attach)(SDpnt); + /* + * If this driver attached to the device, and we no longer + * have anything attached, release the scsi command blocks. + */ + if(SDpnt->attached && SDpnt->has_cmdblocks == 0) + scsi_build_commandblocks(SDpnt); + } + + /* + * This does any final handling that is required. + */ + if(tpnt->finish && tpnt->nr_dev) (*tpnt->finish)(); + MOD_INC_USE_COUNT; + return 0; +} + +static int scsi_unregister_device(struct Scsi_Device_Template * tpnt) +{ + Scsi_Device * SDpnt; + Scsi_Cmnd * SCpnt; + struct Scsi_Device_Template * spnt; + struct Scsi_Device_Template * prev_spnt; + + /* + * If we are busy, this is not going to fly. + */ + if( *tpnt->usage_count != 0) return 0; + /* + * Next, detach the devices from the driver. + */ + + for(SDpnt = scsi_devices; SDpnt; SDpnt = SDpnt->next) + { + if(tpnt->detach) (*tpnt->detach)(SDpnt); + if(SDpnt->attached == 0) + { + /* + * Nobody is using this device any more. Free all of the + * command structures. + */ + for(SCpnt = SDpnt->host->host_queue; SCpnt; SCpnt = SCpnt->next) + { + if(SCpnt->device == SDpnt) + { + if(SCpnt->prev != NULL) + SCpnt->prev->next = SCpnt->next; + if(SCpnt->next != NULL) + SCpnt->next->prev = SCpnt->prev; + if(SCpnt == SDpnt->host->host_queue) + SDpnt->host->host_queue = SCpnt->next; + scsi_init_free((char *) SCpnt, sizeof(*SCpnt)); + } + } + SDpnt->has_cmdblocks = 0; + } + } + /* + * Extract the template from the linked list. + */ + spnt = scsi_devicelist; + prev_spnt = NULL; + while(spnt != tpnt) + { + prev_spnt = spnt; + spnt = spnt->next; + } + if(prev_spnt == NULL) + scsi_devicelist = tpnt->next; + else + prev_spnt->next = spnt->next; + + MOD_DEC_USE_COUNT; + /* + * Final cleanup for the driver is done in the driver sources in the + * cleanup function. + */ + return 0; +} + + +int scsi_register_module(int module_type, void * ptr) +{ + switch(module_type){ + case MODULE_SCSI_HA: + return scsi_register_host((Scsi_Host_Template *) ptr); + + /* Load upper level device handler of some kind */ + case MODULE_SCSI_DEV: +#ifdef CONFIG_KERNELD + if (scsi_hosts == NULL) + request_module("scsi_hostadapter"); +#endif + return scsi_register_device_module((struct Scsi_Device_Template *) ptr); + /* The rest of these are not yet implemented */ + + /* Load constants.o */ + case MODULE_SCSI_CONST: + + /* Load specialized ioctl handler for some device. Intended for + * cdroms that have non-SCSI2 audio command sets. */ + case MODULE_SCSI_IOCTL: + + default: + return 1; + } +} + +void scsi_unregister_module(int module_type, void * ptr) +{ + switch(module_type) { + case MODULE_SCSI_HA: + scsi_unregister_host((Scsi_Host_Template *) ptr); + break; + case MODULE_SCSI_DEV: + scsi_unregister_device((struct Scsi_Device_Template *) ptr); + break; + /* The rest of these are not yet implemented. */ + case MODULE_SCSI_CONST: + case MODULE_SCSI_IOCTL: + break; + default: + } + return; +} + +#endif /* CONFIG_MODULES */ + +#ifdef DEBUG_TIMEOUT +static void +scsi_dump_status(void) +{ + int i; + struct Scsi_Host * shpnt; + Scsi_Cmnd * SCpnt; + printk("Dump of scsi parameters:\n"); + i = 0; + for(shpnt = scsi_hostlist; shpnt; shpnt = shpnt->next) + for(SCpnt=shpnt->host_queue; SCpnt; SCpnt = SCpnt->next) + { + /* (0) 0:0:0:0 (802 123434 8 8 0) (3 3 2) (%d %d %d) %d %x */ + printk("(%d) %d:%d:%d:%d (%s %ld %ld %ld %d) (%d %d %x) (%d %d %d) %x %x %x\n", + i++, SCpnt->host->host_no, + SCpnt->channel, + SCpnt->target, + SCpnt->lun, + kdevname(SCpnt->request.rq_dev), + SCpnt->request.sector, + SCpnt->request.nr_sectors, + SCpnt->request.current_nr_sectors, + SCpnt->use_sg, + SCpnt->retries, + SCpnt->allowed, + SCpnt->flags, + SCpnt->timeout_per_command, + SCpnt->timeout, + SCpnt->internal_timeout, + SCpnt->cmnd[0], + SCpnt->sense_buffer[2], + SCpnt->result); + } + printk("wait_for_request = %p\n", wait_for_request); + /* Now dump the request lists for each block device */ + printk("Dump of pending block device requests\n"); + for(i=0; i<MAX_BLKDEV; i++) + if(blk_dev[i].current_request) + { + struct request * req; + printk("%d: ", i); + req = blk_dev[i].current_request; + while(req) { + printk("(%s %d %ld %ld %ld) ", + kdevname(req->rq_dev), + req->cmd, + req->sector, + req->nr_sectors, + req->current_nr_sectors); + req = req->next; + } + printk("\n"); + } +} +#endif + +#ifdef MODULE + +int init_module(void) { + unsigned long size; + + /* + * This makes /proc/scsi visible. + */ +#if CONFIG_PROC_FS + dispatch_scsi_info_ptr = dispatch_scsi_info; +#endif + + timer_table[SCSI_TIMER].fn = scsi_main_timeout; + timer_table[SCSI_TIMER].expires = 0; + register_symtab(&scsi_symbol_table); + scsi_loadable_module_flag = 1; + + /* Register the /proc/scsi/scsi entry */ +#if CONFIG_PROC_FS + proc_scsi_register(0, &proc_scsi_scsi); +#endif + + + dma_sectors = PAGE_SIZE / SECTOR_SIZE; + dma_free_sectors= dma_sectors; + /* + * Set up a minimal DMA buffer list - this will be used during scan_scsis + * in some cases. + */ + + /* One bit per sector to indicate free/busy */ + size = (dma_sectors / SECTORS_PER_PAGE)*sizeof(FreeSectorBitmap); + dma_malloc_freelist = (unsigned char *) scsi_init_malloc(size, GFP_ATOMIC); + memset(dma_malloc_freelist, 0, size); + + /* One pointer per page for the page list */ + dma_malloc_pages = (unsigned char **) + scsi_init_malloc((dma_sectors / SECTORS_PER_PAGE)*sizeof(*dma_malloc_pages), GFP_ATOMIC); + dma_malloc_pages[0] = (unsigned char *) + scsi_init_malloc(PAGE_SIZE, GFP_ATOMIC | GFP_DMA); + return 0; +} + +void cleanup_module( void) +{ +#if CONFIG_PROC_FS + proc_scsi_unregister(0, PROC_SCSI_SCSI); + + /* No, we're not here anymore. Don't show the /proc/scsi files. */ + dispatch_scsi_info_ptr = 0L; +#endif + + /* + * Free up the DMA pool. + */ + resize_dma_pool(); + + timer_table[SCSI_TIMER].fn = NULL; + timer_table[SCSI_TIMER].expires = 0; +} +#endif /* MODULE */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-indent-level: 4 + * c-brace-imaginary-offset: 0 + * c-brace-offset: -4 + * c-argdecl-indent: 4 + * c-label-offset: -4 + * c-continued-statement-offset: 4 + * c-continued-brace-offset: 0 + * indent-tabs-mode: nil + * tab-width: 8 + * End: + */ |