1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
[[!meta copyright="Copyright © 2007, 2008, 2009, 2011, 2013 Free Software
Foundation, Inc."]]
[[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable
id="license" text="Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with no Invariant
Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license
is included in the section entitled [[GNU Free Documentation
License|/fdl]]."]]"""]]
# CPU Architecture
GNU Mach current only supports the `x86` (alias `ia32` or `i386`) architecture.
`amd64`/`ix64` should work in `32-bit` compatibility mode. However, in practice
`amd64` systems seem to be troublesome more often than not. This is probably
related to the same (chipset-related) problems we often see with recent
machines; but it seems that `amd64` ones use problematic chipsets particularily
often. So far we haven't heard of similar problems with Intel's equivalent
`ix64` (or `EM64T` as it used to be called) -- but maybe that just means fewer
people tried running the Hurd on such machines :-)
Support for running GNU Mach (and a complete GNU/Hurd system) in a
[Xen](http://www.cl.cam.ac.uk/research/srg/netos/xen/) `domU` (again on `x86`
only) is [[being_worked_on|ports/xen]].
Read about further [[ports]].
# Memory
GNU Mach will use a maximum of 1.7 GiB of RAM. If your system has more,
the surplus will silently be ignored. (In past times, this would hinder GNU
Mach from booting at all, but this has been fixed, so you no longer need to
apply GRUB's `uppermem` directive.)
# Video Cards
Debian distributes a version of [X.org](http://x.org/). If your video card driver
depends on a special kernel interface such as that provided by
the `agpgart` kernel module for the Linux kernel, then your video
card will only be supported by the VESA driver.
Using an internal i815 videocard [won't
work](http://lists.debian.org/debian-hurd/2007/12/msg00007.html) (at least when
using the specialized driver), because of [missing AGP GART support in GNU
Mach](http://lists.debian.org/debian-hurd/2007/12/msg00011.html).
# Sound
No sound cards are supported at this time.
# USB 1.1/2.0
USB is not supported at this time.
However, USB-type keyboards and mice may (and have been reported to) work
nevertheless, given that the hardware / BIOS is doing emulation to the
supported legacy interfaces.
# IEEE 1394 (Firewire)
IEEE 1394 is not supported at this time
# Storage
All common IDE drives should work. Some drive geometries do not work,
e.g. drives with hundreds of GiB of storage space, see [[!GNU_Savannah_bug
26425]].
## SATA
SATA drives can work in IDE compatibility mode or in AHCI mode.
This is how booting a [[GNU/Hurd_system|hurd]] will typically fail if GNU Mach
couldn't connect to the hard disk, e.g., in a SATA system without IDE or AHCI
compatibility mode:
start (hd0,3)/hurd/ext2fs.static: (hd0,3)/hurd/ext2fs.static
device:hd0s4: No such device or address
There should be an option in the system's BIOS setup to configure enabling at
least the AHCI compatibility mode.
# Device Drivers
[GNU Mach Reference Manual,
Configuration](http://www.gnu.org/software/hurd/gnumach-doc/Configuration.html)
contains a list of device drivers that are included in GNU Mach and elaborates
on the hardware devices they support.
## DDE
[[hurd/DDE]] provides more up-to-date network device drivers, based on Linux
2.6.29 code, running as user-space processes.
# BIOS32 Service Directory
GNU Mach is not yet compatible with mmconfig, and PCI access requires the presence of the BIOS32 Service Directory.
You can check for its presence by running a Linux 32 bits kernel with the kernel parameter "pci=bios" and checking if PCI devices work.
# User Success Reports
These boards are known to work. Gnumach/Hurd has been installed and run on these board successfully.
* ASUS P2B motherboard with an Intel PII 450MHz CPU with Intel Pro/100 NIC in PCI slot
* Intel SE-440BX motherboard
* VIA EPIA-M Mini-ITX motherboard with VIA Nehemiah C3 1Ghz processor. Onboard NIC (VIA Rhine) works good.
* Compaq Deskpro ENS, Pentium3 (666 MHz upgraded to 1 GHz), Intel i815 chipset, chipset integrated NIC (detected twice, but works fine with eth0; trying to access eth1 confuses the driver and makes the system unusable), Matrox Mystique 220 (PCI) graphics card. Also works with rtl8029 (NE2000 PCI) NIC when onboard NIC disabled in BIOS setup.
* Abit BX6 Rev. 2.0 with Celeron 400, after disabling "memory hole at 15MB" option in BIOS setup. (Otherwise, Mach detects only 15MiB of RAM, making Hurd run *extremely* slow and instable.) Should also work with PentiumII or Pentium3.
* IRC, freenode, #hurd, 2013-08-26:
< stargater> have anyone gnu/hurd running on real hw ?
< youpi> my latitude e6420 laptop, for instance
# User Failure Reports
Some people couldn't get these hardware combinations to work with Hurd.
The present Debian GNU/Hurd installer itself runs on Hurd, so failure on the installer may mean that the hardware is uncompatible with Hurd.
* ASUS P5A motherboard and AMD K6-2 333MHz CPU - doesn't boot
* ASUS P2B-LS motherboard with an Intel PII-MMX 400 MHz CPU - this board had a defective onboard NIC (that could not be disable in BIOS) and working 3COM Etherlink III NIC in a PCI bus slot. This combination worked with GNU/Linux. The 3COM NIC is known to work with the Hurd. However, while gnumach/Hurd will boot on this system, it is confused by the defective onboard NIC and unable to use the 3COM NIC. Attempting to start networking generates a continuous stream of eth0 and eth1 reset messages on the console that renders the system unusable.
* ASrock 775Twins-HDTV with a Pentium D 810 (533 MGz FSB/2600GHz core -- information no longer present on intel's site). Doesn't boot.
|
