1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
|
## <a name="HowTo_Build_OSKit_Mach"> </a> HowTo Build OSKit-Mach
<table align="center" width="75%">
<tr>
<td width="50%"> %TOC% </td>
<td width="50%">
<p><nop></nop></p>
<h3><a name="Introduction"> Introduction </a></h3> This is a brief "<nop>HowTO build OSKit-Mach" (a.k.a GNUmach 2.0). It covers everything from getting the latest sources of both the <a href="http://www.cs.utah.edu/flux/oskit/" target="_top">OSKit</a> and the GNUmach kernel, down to building and debugging them. <p> To be able to actually make use of your recently checked out CVS version of the GNUMach kernel &amp; c:o you need a GNU system of <a href="ftp://ftp.funet.fi/pub/gnu/alpha/gnu/hurd/contrib/marcus/gnu-20020816.tar.gz" target="_top">gnu-20020816.tar.gz</a> or later. See [[Distrib/TarballNotesHome]] for more info. </p></nop></td>
</tr>
</table>
## <a name="Getting_your_hands_on_the_source"> Getting your hands on the source </a>
First you need to checkout the relevant sources. It comes in various flavours and the recommended way is to checkout from CVS.
### <a name="The_OSKit_Sources"> </a> The OSKit Sources
**_Note:_** The [Savannah OSKit](http://savannah.gnu.org/projects/oskit/) project is the recommended source today of the OSKit. Its CVS tree holds the official sources and all known patches, plus a few others.
**_Official Sources:_**
* St. Patricks day 2002 release: <ftp://flux.cs.utah.edu/flux/oskit/oskit-20020317.tar.gz>
* Valentine's day 2001 release: <ftp://flux.cs.utah.edu/flux/oskit/oskit-20010214.tar.gz>
**_Official Patches:_**
* Download useful [[OskitPatches]] or on the nearest Debian FTP.
**_Savannah CVS:_**
The recommended document for accessing the Savannah OSKit CVS is <http://savannah.gnu.org/cvs?group=oskit>
The following command should get the sources for you:
$ export CVS_RSH="ssh"
$ cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/oskit co oskit
Note: if you get a message about RSA/DSA keys, please go check it here: <http://savannah.gnu.org/cvs?group=oskit>
### <a name="GNUmach_amp_Mig_Sources"> </a> GNUmach & Mig Sources
The recommended document for accessing the Hurd CVS on Savannah is at <http://savannah.gnu.org/cvs/?group=hurd>
Remember to set up you environment to use 'ssh' for cvs:
$ export CVS_RSH="ssh"
Note: if you get a message about RSA/DSA keys when using cvs commands, please go check it here: <http://savannah.gnu.org/cvs?group=hurd>
**_Gnu Mach:_**
All development, apart from critical bug fixes, is done on the upcoming 2.0 release (OSKit/Mach). A potentially confusing point is that the code for OSKit/Mach (as opposed to the 1.X release, aka "GNU Mach") is now on the `TRUNK` of the 'gnumach' CVS module. In the past the trunk was 1.X (GNU Mach) and 2.0 (OSKit/Mach) was a branch.
$ cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/hurd co gnumach
In case you have been tracking the oskit-branch and want to move to the current `HEAD` branch you can issue the following instead to update your tree.
$ cd <YOUR MACH DIR>
$ cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/hurd update -Pd -A
Where `<YOUR MACH DIR>` can be `gnumach`, `oskit-mach`, or similar. The `-A` is what moves you from a branch to the default (in this case HEAD), but without forcing a specific tag. `-P` Prunes your local copy from stale directories and `-d` creates new directories for you.
**_The Hurd servers:_**
In case you want to build the Hurd servers as well, you can check them out with:
$ cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/hurd co hurd
**_Inteface generator:_**
See the [[Mig/MachInterfaceGenerator]] for more information.
Check it out using
$ cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/hurd co mig
## <a name="Building"> Building </a>
The recommended versions of GCC are
<dl>
<dt> For the OSKit</dt>
<dd> GCC 2.95.X </dd>
<dt> For GNUmach and <nop>MiG</nop></dt>
<dd> GCC 3.2 </dd>
</dl>
### <a name="The_OSKit"> </a> The OSKit
Do _not_ forget to apply all known [[OskitPatches]] before starting the build! This does not apply if you use the OSKit from [Savannah](http://savannah.gnu.org/).
The attached [[ATTACHURLmodulesx86pc]], or [[ATTACHURLmodules-lightx86pc]], is an example setup, your needs may vary but this one works for standard COTS PC's. Now, how to configure and build the OSKit.
$ cd oskit-20020317/
$ mkdir build
$ cd build
$ CC=gcc-2.95 \
CFLAGS="-g" \
../configure --prefix=/usr/local \
--enable-debug \
--enable-modulefile=modules-light.x86.pc
$ make
$ sudo make install
Comment: Barry deFreese
For you newbies like me, I had problems using `modules.x86.pc.full` and `modules.x86.pc`. There seems to be problems with `examples/dyntest`. Make sure you pull down and use the [[ATTACHURLmodules-lightx86pc]].
Comment: Luis Miguel
I needed to apply another patch that is not in CVS yet. The patch is in this [message](http://mail.gnu.org/archive/html/bug-hurd/2003-06/msg00054.html) in the bug-hurd mailing list.
### <a name="Mach_Interface_Generator"> Mach Interface Generator </a>
To build any Mach kernel you need an interface generator, MiG. To be on the safe side, use the CVS version. If you use Debian, you can install package [mig-i386-gnu](http://packages.debian.org/mig-i386-gnu). If you don't use Debian or want to compile MiG by yourself on Linux/\*BSD system, you must first install Mach headers. In Mach directory do:
$ mkdir build
$ cd build
$ ../configure --prefix=/usr/local # Default prefix is / !
$ sudo make -k install-headers # -k is for ignoring errors
Now you are ready to compile and install MiG (commands are in Mig's source directory):
$ automake --add-missing # sometimes it's needed
$ mkdir build
$ cd build
$ ../configure
$ make
$ sudo make install
### <a name="GNUmach_2_0_OSKit_Mach_"> </a> GNUmach 2.0 (OSKit-Mach)
Unlike its half sister, the OSKit-Mach kernel does _not_ need a cross compiler. The regular gcc for your x86 Linux system does just fine. However, you might want to use gcc 3.2 with the latest and greatest CVS version of Mach.
**_Configuring:_**
$ cd gnumach
$ mkdir build
$ cd build
$ MIG=/usr/local/bin/mig \
CC=gcc-3.2 \
CFLAGS="-g -O2" \
OSKIT_LIBDIR=/usr/local/lib/oskit \
../configure --prefix=/gnu
Comment: Barry deFreese
I updated `CFLAGS` to `CFLAGS="-g -O2"`. Using just `-O` I was getting errors in the `machine_init` function. For newbies like me, the `-g` is only needed if you want to enable debugging. The `-O2` is Oh 2, not Zero 2.
**_Building:_**
Instead of using `make kernel` to build kernel, in OSKit-Mach you have to use <code>make kernel-<var>DRIVERS</var></code>, where <var>DRIVERS</var> is <code><var>DRIVER</var>+<var>DRIVER</var>+...+<var>DRIVER</var></code> (a list of drivers separated by `+`). <var>DRIVER</var> can be one of:
* `ide`
* `floppy`
* <code>ethernet\_<var>ETHDRV</var></code> where <var>ETHDRV</var> is taken from `oskit/oskit/dev/linux_ethernet.h`.
* <code>scsi\_<var>SCSIDRV</var></code> where <var>SCSIDRV</var> is taken from `oskit/oskit/dev/linux_scsi.h`.
Thus, to build a IDE capable kernel with 3Com Vortex Boomerang support you use the following:
$ make kernel-ide+ethernet_vortex
$ sudo make install
$ sudo gzip -f /gnu/boot/oskit-mach
If the `make` command complains about missing dependencies, then you haven't passed correct `OSKIT_LIBDIR` variable to the `configure` script. Or you can use the patch below and pass something like `--with-oskit=/usr/local` to `configure`.
Comment: Barry deFreese
If you receive an error like `No rule to make target Kernel-ide...`, there is a patch for an issue with finding the oskit libraries. Then run `configure` on gnumach again with the option `--with-oskit=/path/to/oskit/libraries`.
The patch can be found here: [gnumach-oskit-path.patch](http://www.vis.ethz.ch/~wagi/hurd/gnumach/gnumach-oskit-path.patch) Thanks wagi!!
Don't use both `--with-oskit` and `OSKIT_LIBDIR`. Choose one of these methods.
If you want to use tftp to download the kernel from Grub and don't care about the symbols I recommend either stripping or removing the `--enable-debug` and `-g` statements.
## <a name="Debugging"> Debugging </a>
See the [[Mach/RemoteDebugOskitMach]] page.
## <a name="Attachments"> Attachments </a>
* [[ATTACHURLmodulesx86pc]]: Configures modules to build in OSKit.
> Compared to 21May04 CVS, this adds SMP but omits the random module which was added to CVS in Jan03.
* [[ATTACHURLmodules-lightx86pc]]: Lighter version of required modules. Used for building GNUmach with OSKit, i.e. OSKit/Mach.
> Compared to the above config, this omits the Linux, MSDOS,
>
> NetBoot, and PXE loader support, bootp support, OSKit on UNIX support, some thread-safe library versions, the address map manager, fsread, fsnamespace/\{fsn,fsn\_r\}, fudp, memdebug, memfs, smp, POSIX threads, svm, uvm, the Simple Process Library, realtime support, FreeBSD devices and code, linux/fs, the UDP library, **the sets of x86 and UNIX example kernels**, the testsuite, and the security server. **The new random module is also not configured.**
|
