diff options
| -rw-r--r-- | hurd.mdwn | 1 | ||||
| -rw-r--r-- | hurd/faq.mdwn | 62 | ||||
| -rw-r--r-- | hurd/faq/old-stuff.mdwn | 45 |
3 files changed, 63 insertions, 45 deletions
@@ -15,6 +15,7 @@ * [[SeenHurd]] - Media references * [[Shopping]] - Hurd Gear * [[FunnyHurd]] - From a different Herd +* [[FAQ]] # Understanding diff --git a/hurd/faq.mdwn b/hurd/faq.mdwn index 6bb6f55f..aab538d9 100644 --- a/hurd/faq.mdwn +++ b/hurd/faq.mdwn @@ -1,45 +1,17 @@ -In addition to the [general FAQ](http://www.gnu.org/software/hurd/docs.html#TOCfaq) there are the following typical newbie questions. (There is an [updated version](http://tuxou.ouvaton.org/hurd/) which is not official yet.) - -If you still have problems, do not hesitate to make use of the [[mailing_lists]] or the [[IRC]]. - -* **_You say GNU, don't you mean GNU/Hurd?_** - * Yes and no. GNU refers to the system as a whole, while GNU/Hurd is more specific, saying that it is the GNU system running on the Hurd -- to differentiate it from the GNU system running on Linux, GNU/Linux. Also see [[GNU/GnuNames]] - -* **_What editor can I use?_** - * `nano` is the default editor on a fresh install, not `ae`. - -* **_Why can't I get the answers I need from Hurd hackers?_** - * This [document](http://www.catb.org/~esr/faqs/smart-questions.html) may help you understand some developers attitudes and social norms. - -* **_Where are the virtual consoles I use when running GNU/Linux?_** - * You need to [use screen](http://www.gnu.org/software/hurd/faq.en.html#q4-6) instead, also available when running GNU/Linux. - * The [new console](http://lists.debian.org/debian-hurd/2002/debian-hurd-200209/msg00054.html) by Marcus Brinkmann could also be used. It supports the Alt-Fn keys for switching like in GNU/Linux. NOTE: that message has an error in the configuration steps, it says `/dev/vts` when it means `/dev/vcs`. A more up-to-date howto is [[console]]. - -* **_What is a translator?_** - * The official FAQ [answers](http://www.gnu.org/software/hurd/faq.en.html#q4-2) this question by a reference to [hurd-doc-translator](http://www.debian.org/ports/hurd/hurd-doc-translator). - -* **_Where's the sauce?_** - * It's on [Savannah](http://savannah.gnu.org). See also the [GNU Development Resources](http://www.gnu.org/software/devel.html), for more information. - -* **_What is this "libio" stuff?_** - * There was an ABI change for glibc0.3. It's recommended you reinstall your GNU/Hurd system if you run a system installed before the summer of 2002. This is a similar cause for the various Linux distributions who changed from libc5 to libc6 or glibc2 around 1998. - -* **_What is GNU Mach vs. oskit-mach?_** - * These are different versions of the Mach microkernel that supports the Hurd that runs on top of it. For more info, see [[Mach]] - -* **_What software is available for GNU?_** - * Most packages from [Debian](http://www.debian.org/) [GNU/Linux](http://www.gnu.org/gnu/linux-and-gnu.html) which aren't linux-specific ([Packages That Won't Be Ported](http://www.debian.org/ports/hurd/hurd-devel-debian)) are expected to work on GNU/Hurd too. See the database in <http://packages.debian.org/>. Programs which need pthreads, including [GNOME](http://www.gnome.org), [KDE](http://www.kde.org), [Mozilla](http://www.mozilla.org), [OpenOffice](http://www.openoffice.org), [SDL](http://www.libsdl.org), etc. are being worked on currently using Neal Walfields libpthreads. See the [[Distrib/PortingIssues]] document for some common build problems and their solutions. - * If you can't fetch a package with "apt-get install ", try building it from source: "apt-get source && cd <package\_dir> && debian/rules binary". - * As of January 2007, 50% of Debian packages have been ported on the Hurd. Of course, bug testing is welcome. - -* **_How do I initialize a serial console on the Hurd?_** - * You can try out the Serial Howto at <http://www.nongnu.org/thug/serial-howto.txt> - * For a real serial console at boot time you need to rebuild your GNUmach 1.x kernel. For more info see the Utah release notes at [http://www.cs.utah.edu/flux/mach4-i386/html/mach4-UK22.html#serial\_console](http://www.cs.utah.edu/flux/mach4-i386/html/mach4-UK22.html#serial_console) - -* **_Will GNU work in Vmware?_** - * It's highly recommended and easier to get a full image for Bochs. See [[Distrib]] - * It didn't use to, [Hurd bootstrap fails](http://lists.debian.org/debian-hurd/2002/debian-hurd-200207/msg00069.html). Vmware is not [free software](http://www.gnu.org/philosophy/free-sw.html) and it is [[Distrib/VmWare]]. We recommend to use [free](http://www.gnu.org/philosophy/free-sw.html) alternatives, like [[Distrib/BochsEmulator]]. - * A faster, more widespread and [free](http://www.gnu.org/philosophy/free-sw.html) recent alternative is [QEMU][[running/QEMU]]. You can find more informations on [[running/QEMU]]. - * If someone prefers using VMWare: - * It works with VMWare Workstation 4.0.5 build-6030. - * Running Debian GNU/HURD in VMWare works for me -- [[Main/MichaelAblassmeier]] - 03 Mar 2004 +[[meta copyright="Copyright © 2008 Free Software Foundation, Inc."]] + +[[meta license="""[[toggle id="license" text="GFDL 1.2+"]][[toggleable +id="license" text="Permission is granted to copy, distribute and/or modify this +document under the terms of the GNU Free Documentation License, Version 1.2 or +any later version published by the Free Software Foundation; with no Invariant +Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license +is included in the section entitled +[[GNU_Free_Documentation_License|/fdl]]."]]"""]] + +[[meta title="GNU Hurd FAQ"]] + +[[inline +pages="hurd/faq/* and !*/discussion" +show=0 +actions=yes +rootpage="hurd/faq" postformtext="Add a new item titled:"]] diff --git a/hurd/faq/old-stuff.mdwn b/hurd/faq/old-stuff.mdwn new file mode 100644 index 00000000..6bb6f55f --- /dev/null +++ b/hurd/faq/old-stuff.mdwn @@ -0,0 +1,45 @@ +In addition to the [general FAQ](http://www.gnu.org/software/hurd/docs.html#TOCfaq) there are the following typical newbie questions. (There is an [updated version](http://tuxou.ouvaton.org/hurd/) which is not official yet.) + +If you still have problems, do not hesitate to make use of the [[mailing_lists]] or the [[IRC]]. + +* **_You say GNU, don't you mean GNU/Hurd?_** + * Yes and no. GNU refers to the system as a whole, while GNU/Hurd is more specific, saying that it is the GNU system running on the Hurd -- to differentiate it from the GNU system running on Linux, GNU/Linux. Also see [[GNU/GnuNames]] + +* **_What editor can I use?_** + * `nano` is the default editor on a fresh install, not `ae`. + +* **_Why can't I get the answers I need from Hurd hackers?_** + * This [document](http://www.catb.org/~esr/faqs/smart-questions.html) may help you understand some developers attitudes and social norms. + +* **_Where are the virtual consoles I use when running GNU/Linux?_** + * You need to [use screen](http://www.gnu.org/software/hurd/faq.en.html#q4-6) instead, also available when running GNU/Linux. + * The [new console](http://lists.debian.org/debian-hurd/2002/debian-hurd-200209/msg00054.html) by Marcus Brinkmann could also be used. It supports the Alt-Fn keys for switching like in GNU/Linux. NOTE: that message has an error in the configuration steps, it says `/dev/vts` when it means `/dev/vcs`. A more up-to-date howto is [[console]]. + +* **_What is a translator?_** + * The official FAQ [answers](http://www.gnu.org/software/hurd/faq.en.html#q4-2) this question by a reference to [hurd-doc-translator](http://www.debian.org/ports/hurd/hurd-doc-translator). + +* **_Where's the sauce?_** + * It's on [Savannah](http://savannah.gnu.org). See also the [GNU Development Resources](http://www.gnu.org/software/devel.html), for more information. + +* **_What is this "libio" stuff?_** + * There was an ABI change for glibc0.3. It's recommended you reinstall your GNU/Hurd system if you run a system installed before the summer of 2002. This is a similar cause for the various Linux distributions who changed from libc5 to libc6 or glibc2 around 1998. + +* **_What is GNU Mach vs. oskit-mach?_** + * These are different versions of the Mach microkernel that supports the Hurd that runs on top of it. For more info, see [[Mach]] + +* **_What software is available for GNU?_** + * Most packages from [Debian](http://www.debian.org/) [GNU/Linux](http://www.gnu.org/gnu/linux-and-gnu.html) which aren't linux-specific ([Packages That Won't Be Ported](http://www.debian.org/ports/hurd/hurd-devel-debian)) are expected to work on GNU/Hurd too. See the database in <http://packages.debian.org/>. Programs which need pthreads, including [GNOME](http://www.gnome.org), [KDE](http://www.kde.org), [Mozilla](http://www.mozilla.org), [OpenOffice](http://www.openoffice.org), [SDL](http://www.libsdl.org), etc. are being worked on currently using Neal Walfields libpthreads. See the [[Distrib/PortingIssues]] document for some common build problems and their solutions. + * If you can't fetch a package with "apt-get install ", try building it from source: "apt-get source && cd <package\_dir> && debian/rules binary". + * As of January 2007, 50% of Debian packages have been ported on the Hurd. Of course, bug testing is welcome. + +* **_How do I initialize a serial console on the Hurd?_** + * You can try out the Serial Howto at <http://www.nongnu.org/thug/serial-howto.txt> + * For a real serial console at boot time you need to rebuild your GNUmach 1.x kernel. For more info see the Utah release notes at [http://www.cs.utah.edu/flux/mach4-i386/html/mach4-UK22.html#serial\_console](http://www.cs.utah.edu/flux/mach4-i386/html/mach4-UK22.html#serial_console) + +* **_Will GNU work in Vmware?_** + * It's highly recommended and easier to get a full image for Bochs. See [[Distrib]] + * It didn't use to, [Hurd bootstrap fails](http://lists.debian.org/debian-hurd/2002/debian-hurd-200207/msg00069.html). Vmware is not [free software](http://www.gnu.org/philosophy/free-sw.html) and it is [[Distrib/VmWare]]. We recommend to use [free](http://www.gnu.org/philosophy/free-sw.html) alternatives, like [[Distrib/BochsEmulator]]. + * A faster, more widespread and [free](http://www.gnu.org/philosophy/free-sw.html) recent alternative is [QEMU][[running/QEMU]]. You can find more informations on [[running/QEMU]]. + * If someone prefers using VMWare: + * It works with VMWare Workstation 4.0.5 build-6030. + * Running Debian GNU/HURD in VMWare works for me -- [[Main/MichaelAblassmeier]] - 03 Mar 2004 |