diff options
| author | GNU Hurd wiki engine <web-hurd@gnu.org> | 2007-10-27 16:45:50 +0000 |
|---|---|---|
| committer | GNU Hurd wiki engine <web-hurd@gnu.org> | 2007-10-27 16:45:50 +0000 |
| commit | 645e55c702220f4c69e2f7398c638dfaf1b31763 (patch) | |
| tree | d897352697978bd39f3d423152676a1998280011 /microkernel/mach | |
| parent | 1bbef523bf9e2d03e61281b2b9c1079f75440f34 (diff) | |
web commit by antrik: Added my success reports
Diffstat (limited to 'microkernel/mach')
| -rw-r--r-- | microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn b/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn index 9366d3ab..09c9fa15 100644 --- a/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn +++ b/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn @@ -70,6 +70,8 @@ These boards are known to work. Gnumach/Hurd has been installed and run on these * ASUS P2B motherboard with an Intel PII 450MHz CPU with Intel Pro/100 NIC in PCI slot * Intel SE-440BX motherboard * VIA EPIA-M Mini-ITX motherboard with VIA Nehemiah C3 1Ghz processor. Onboard NIC (VIA Rhine) works good. +* Compaq Deskpro ENS, Pentium3 (666 MHz upgraded to 1 GHz), Intel i815 chipset, chipset integrated NIC (detected twice, but works fine with eth0; trying to access eth1 confuses the driver and makes the system unusable), Matrox Mystique 220 (PCI) graphics card. Also works with rtl8029 (NE2000 PCI) NIC when onboard NIC disabled in BIOS setup. +* Abit BX6 Rev. 2.0 with Celeron 400, after disabling "memory hole at 15MB" option in BIOS setup. (Otherwise, Mach detects only 15MiB of RAM, making Hurd run *extremely* slow and instable.) Should also work with PentiumII or Pentium3. # User Failure Reports |