update

2 files changed, 9 insertions, 19 deletions

diff --git a/hurd/running/debian/qemu_image.mdwn b/hurd/running/debian/qemu_image.mdwn
index 1f42507b..a17ff894 100644
--- a/hurd/running/debian/qemu_image.mdwn
+++ b/hurd/running/debian/qemu_image.mdwn
@@ -16,7 +16,7 @@ Usage:
 
     $ wget http://people.debian.org/~sthibault/hurd-i386/debian-hurd.img.tar.gz
     $ tar -xz < debian-hurd.img.tar.gz
-    $ kvm -m 512 -drive cache=writeback,file=$(echo debian-hurd-*.img)
+    $ kvm -m 1G -drive cache=writeback,file=$(echo debian-hurd-*.img)
 
 Please also read the README file: <http://people.debian.org/~sthibault/hurd-i386/README>
 
diff --git a/hurd/running/qemu.mdwn b/hurd/running/qemu.mdwn
index dfc9cdd2..91cc7c16 100644
--- a/hurd/running/qemu.mdwn
+++ b/hurd/running/qemu.mdwn
@@ -32,7 +32,7 @@ Note that the following images are unofficial ones: they have been prepared by
 volunteers and may not have been tested extensively.
 
 * [Disk image](http://draketo.de/dateien/hurd/bab-hurd-qemu-2008-10-29.img.tar.bz2) 
-  with a short intro on translators.  Just start it with `qemu -m 512
+  with a short intro on translators.  Just start it with `qemu -m 1G
   -drive cache=writeback,file=disk_image.img`.
   It should work without any of the configuration below. If you want to know what you can do 
   with it, please have a look at [[its_wikipage|hurd/running/qemu/babhurd_image]]. And when 
@@ -50,12 +50,6 @@ Also you can use QEMU to easily try one of the
 
 Instructions for creating a qemu image from the install CDs from debian installer can be found in the README alongside the d-i Hurd images: <http://people.debian.org/~sthibault/hurd-i386/installer/cdimage/>
 
-## Old method
-
-1. First thing is to install [[/QEMU]].
-2. A [[grub]] boot disk for the floppy disk image needed for booting. The [0\.97 version](ftp://alpha.gnu.org/gnu/grub/grub-0.97-i386-pc.ext2fs) works fine. I downloaded it and renamed to `floppy.img`. Alternatively, the Debian grub-disk package (up till version 0.97-28) is fine as well.
-3. You will need a [Debian/Hurd installation CD](http://www.debian.org/ports/hurd/hurd-cd). K16 works fine.
-
 # KVM acceleration
 
 Check if your CPU supports kvm:
@@ -117,11 +111,6 @@ IRC, freenode, #hurd, 2012-08-29:
     <gnu_srs> seems like kvm -h says: -no-kvm-irqchip and man kvm says:
       -machine kernel_irqchip=off
 
-/!\ Note that there are known performance issues with KVM on Linux 2.6.39
-kernels, compared to 2.6.32: [[!debbug 634149]].  We're preparing on a change
-on our side to work around this.
-
-
 # HAP/EPT/NPT acceleration
 
 Performance will be yet better if HAP (EPT or NPT) is available:
@@ -139,7 +128,7 @@ First off you will need to create a disk image using `qemu-img`. I have set mine
 
 Next you will want to start up QEMU and begin the installation process.
 
-    $ qemu -m 512 -drive cache=writeback,file=hd0.img -cdrom debian-7.0-hurd-i386-NETINST-1.iso -net nic,model=rtl8139 -net user
+    $ qemu -m 1G -drive cache=writeback,file=hd0.img -cdrom debian-7.0-hurd-i386-NETINST-1.iso -net nic,model=rtl8139 -net user
 
 Now at his point do the regular install using `hd0` as your harddrive. Partition it and install the base system.
 
@@ -187,7 +176,7 @@ Once you have finished installing the base system (might take some time) the sys
 
 Starting qemu/qemu-kvm:
 
-    $ kvm -m 512 -net nic -net user,hostfwd=tcp::5555-:22 -drive cache=writeback,file=hd0.img -vga vmware
+    $ kvm -m 1G -net nic -net user,hostfwd=tcp::5555-:22 -drive cache=writeback,file=hd0.img -vga vmware
     vmsvga_value_write: guest runs Linux.
 
 Note: See below on port forwarding in the networking section.
@@ -301,8 +290,9 @@ If you want to connect from the host system to the Hurd system running in QEMU,
     <youpi> there's not much better to do than that
     <youpi> (patching resolv.conf inside the guest, or apply the ipv6 patch)
 
+This is fixed in qemu 2.6
 
-## Port Forwarding in QEMU
+## Port Forwarding in QEMU/KVM
 (In the following we assume we use kvm!)
 
 #### Logging in to Hurd from a terminal in  your host system
@@ -310,7 +300,7 @@ This is the recommended way to work with a Command Line Interface (CLI) since al
 
 a) with ssh (assuming you have installed openssh-server)
 
-    $ kvm -m 512 -net nic -net user,hostfwd=tcp::5555-:22 -drive cache=writeback,file=hd0.img &
+    $ kvm -m 1G -net nic -net user,hostfwd=tcp::5555-:22 -drive cache=writeback,file=hd0.img &
 
 Logging in to the running Hurd:
 
@@ -327,7 +317,7 @@ Copying files:
 
 b) with telnet (assuming you have installed a telnet server, like telnetd)
 
-    $ kvm -m 512 -net nic -net user,hostfwd=tcp::5556-:23 -drive cache=writeback,file=hurd-install.qemu &
+    $ kvm -m 1G -net nic -net user,hostfwd=tcp::5556-:23 -drive cache=writeback,file=hurd-install.qemu &
 
 Logging in to the running Hurd:
 
@@ -368,7 +358,7 @@ Now it is time to start-up your QEMU Hurd system and get networking going in the
 
 **Important:** Remember you may need to use the `-M isapc` or `-isa` flag if using an older version of the gnumach package.
 
-    $ qemu -m 512 -drive cache=writeback,file=hd0.img -cdrom debian-K9-hurd-i386-CD1.iso -fda floppy.img -boot a -net nic -net tap
+    $ qemu -m 1G -drive cache=writeback,file=hd0.img -cdrom debian-K9-hurd-i386-CD1.iso -fda floppy.img -boot a -net nic -net tap
 
 Once you have logged in as `root` run the `pfinet` translator with values that apply to your network. Think of your QEMU client as another computer in your network.