summaryrefslogtreecommitdiff
path: root/hurd/running/debian/faq.mdwn
diff options
context:
space:
mode:
authorThomas Schwinge <tschwinge@gnu.org>2007-09-07 22:15:28 +0200
committerThomas Schwinge <tschwinge@gnu.org>2007-09-07 22:15:28 +0200
commit7030f8b48c7a2a3d8f36cb0dd2996059a585232a (patch)
treee38c7d63b9b5a4713cc3ee650cdc2ff09aad3275 /hurd/running/debian/faq.mdwn
parentb48377c0de034f28d00b31e7ab7ba93369201a2b (diff)
Reintegrate another bunch of pages and apply clean-ups.
Diffstat (limited to 'hurd/running/debian/faq.mdwn')
-rw-r--r--hurd/running/debian/faq.mdwn137
1 files changed, 137 insertions, 0 deletions
diff --git a/hurd/running/debian/faq.mdwn b/hurd/running/debian/faq.mdwn
new file mode 100644
index 00000000..1892d63f
--- /dev/null
+++ b/hurd/running/debian/faq.mdwn
@@ -0,0 +1,137 @@
+Debian GNU/Hurd FAQ.
+
+See also the [[Hurd_FAQ|hurd/FAQ]] and [[after_install]].
+
+[[toc ]]
+
+
+# `df`
+
+There is no `/etc/mtab`, so just running `df` will yield an error. Pass `df` a
+path like `df /` or `df ./` to see the disk usage of that particular file
+system.
+
+
+# `sshd`
+
+You need to disable `PriviledgeSeperation` in `/etc/ssh/sshd\_options`. Also
+make sure you have `/dev/random`, see below.
+
+
+# `/dev/random`
+
+There is no random device by default as no secure implementation has been
+finished yet. An easy (but very insecure) work-around is to copy a binary file
+like `/bin/bash` to `/dev/random` and `/dev/urandom`.
+
+
+# Hurd Console
+
+Edit `/etc/default/hurd-console` to configure the Hurd console and enable it on
+bootup. See [[console]] for further information about the Hurd console.
+
+
+# Swap
+
+
+# 2 GiB Partition Limit
+
+The 2 GiB limit has been removed in Debian GNU/Hurd.
+
+
+# Free Memory
+
+Run `vmstat` to see memory and swap usage.
+
+
+# Translators
+
+
+# 512 MiB RAM Limit
+
+GNU Mach does not cope well with lots of memory. Newer versions of the Debian
+`gnumach` package will limit themselves to around 1 GiB of memory. If you have
+an older version, or still experience problems with `vmstat` (see above)
+reported much less memory than you have, the best is to limit the memory it can
+see via GRUB's `upppermem` feature. Add `uppermem 786432` to GRUB's Hurd entry
+in `menu.lst`.
+
+This should be fixed.
+
+
+# `xserver-common`
+
+You need to run `dpkg-reconfigure xserver-common` and select `Anybody` for
+starting X as there is no way to detect console users currently.
+
+
+# Reporting Bugs
+
+Please try to reproduce bugs which are not obviously Hurd-specific on Debian
+GNU/Linux and then file them there.
+
+If you find a genuine issue in Debian GNU/Hurd, please file it in our Alioth
+bug tracker at
+[http://alioth.debian.org/tracker/?atid=411594&amp;group\_id=30628&amp;func=browse](http://alioth.debian.org/tracker/?atid=411594&group_id=30628&func=browse)
+If you find a bug in the Hurd or GNU Mach themselves, either file a bug against
+the respective Debian packages, or directly at
+<http://savannah.gnu.org/bugs/?group=hurd>
+
+
+# `ps` Hangs
+
+If `ps` hangs, try `ps -M` which might still work.
+
+
+# Porting Packages
+
+
+# Debugging inside glibc
+
+To get [[debugging]] information for glibc, you need to install the
+`libc0.3-dbg` package. At the place [[debugging/GDB]] looks for debugging
+symbols by default (`/usr/lib/debug/lib/`), Debian's `libc0.3-dbg` stores only
+frame unwind information. If you want to step into glibc while debugging, you
+need to add `LD\_LIBRARY\_PATH=/usr/lib/debug` to GDB's environment. If that
+still does not work, try `LD\_PRELOAD=/usr/lib/debug/libc.so.0.3` instead. You
+can add to GDB's environment via `set env FOO bar` from the GDB command line.
+
+It seems that this is no longer needed with the Debian glibc 2.5 packages, but
+I may as well be wrong. Have to check that again.
+
+
+# Debugging Translators
+
+In order to [[debug|debugging]] translators and being able to step into glibc
+during it, you need the `hurd-dbg` and `libc0.3-dbg` packages installed. Then
+start the translator like `settrans -P /foo /usr/bin/env
+LD\_LIBRARY\_PATH=/usr/lib/debug /hurd/foofs`. The `-P` option will make it
+pause and you will be able to attach [[debugging/GDB]] to the process.
+
+Is starting the translator like this really needed?
+
+
+# Other Repositories
+
+If you want to use the `apt-get source` facility, make sure that
+`/etc/apt/sources.list` contains a line like
+
+ deb-src http://ftp.de.debian.org/debian unstable main
+
+... replacing _de_ with your homeland's code.
+
+
+# Kernel Logs
+
+The kernel logs are written to `/dev/klog`. Run `cat /dev/klog > foo` as root
+and hit `ctrl+c` after a few seconds to catch the logs. You can do this only
+once and do not do this in single-user mode (where `ctrl+c` does not work).
+
+
+# `bad hypermeta data`
+
+If you get the error `bad hypermeta data` when trying to mount an ext3
+partition from GNU/Linux, that is usually because the file system has not been
+unmounted cleanly (maybe GNU/Linux got suspended to disk) and the Hurd cannot
+mount it as ext2 without checking. Either boot back into GNU/Linux and unmount
+it or you can try to run `fsck.ext3` from GNU/Hurd directly.