[[hurd/running/creating_image_tarball]] -> [[hurd/running/debian/creating_image_tarball]] and split out shell script.

1 files changed, 180 insertions, 0 deletions

diff --git a/hurd/running/debian/creating_image_tarball/anonftpsync-ports b/hurd/running/debian/creating_image_tarball/anonftpsync-ports
new file mode 100644
index 00000000..0988dbde
--- /dev/null
+++ b/hurd/running/debian/creating_image_tarball/anonftpsync-ports
@@ -0,0 +1,180 @@
+#! /bin/sh
+set -e
+
+# This script originates from http://www.debian.org/mirror/anonftpsync
+# modified by Martin Zobel-Helas <zobel@debian.org>, 2005-01-16
+# 	these modifications are published under the terms of the GNU GPL
+# Modifications:
+# + some more documentation about variables
+# + added ARCH_EXCLUDE
+# + mirror in a safe way, first /pool, then /dists and the rest
+# modified by Aurelien Jarno <aurel32@debian.org>, 2007-12-02
+# 	these modifications are published under the terms of the GNU GPL
+# + modifications to mirror debia,-ports.org
+# Version: $Id: anonftpsync,v 1.18 2005/10/28 15:25:54 aba Exp $ 
+
+
+# Note: You MUST have rsync 2.0.16-1 or newer, which is available in slink
+# and all newer Debian releases, or at http://rsync.samba.org/
+
+# Set the variables below to fit your site. You can then use cron to have
+# this script run daily to automatically update your copy of the archive.
+
+# Don't forget:
+# chmod 744 anonftpsync
+
+# TO is the destination for the base of the Debian mirror directory
+# (the dir that holds dists/ and ls-lR).
+# (mandatory)
+
+TO=/home/foo/rsync-debian-ports
+
+# RSYNC_HOST is the site you have chosen from the mirrors file.
+# (http://www.debian-ports.org/mirrors)
+# (mandatory)
+
+RSYNC_HOST=rsync.debian-ports.org
+
+# RSYNC_DIR is the directory given in the "Packages over rsync:" line of
+# the mirrors file for the site you have chosen to mirror.
+# (mandatory)
+
+RSYNC_DIR=debian/
+
+# LOGDIR is the directory where the logs will be written to
+# (mandatory)
+
+LOGDIR=/var/log/rsync-debian-ports
+
+# ARCH_EXCLUDE can be used to exclude a complete architecture from
+# mirrorring. Please use as space seperated list.
+# Possible values are:
+# armel hurd-i386 kfreebsd-amd64 kfreebsd-i386
+#
+# There is one special value: source
+# This is not an architecture but will exclude all source code in /pool
+#
+# eg.
+# ARCH_EXCLUDE="hurd-i386"
+# 
+# With a blank ARCH_EXCLUDE you will mirror all availible architectures
+# (optional)
+
+ARCH_EXCLUDE="armel kfreebsd-amd64 kfreebsd-i386 m68k"
+
+# EXCLUDE is a list of parameters listing patterns that rsync will exclude.
+# The following example would exclude mostly everything:
+#EXCLUDE="\
+#  --exclude binary-hurd-i386/ --exclude binary-kfreebsd-i386/
+#  --exclude *_hurd-i386.deb --exclude *_knetbsd-i386.deb \
+#  --exclude stable/ --exclude testing/ --exclude unstable/ \
+#  --exclude source/ \
+#  --exclude *.orig.tar.gz --exclude *.diff.gz --exclude *.dsc \
+#  --exclude /base/ --exclude /bochs/ --exclude /obsolete/ \
+# "
+
+# With a blank EXCLUDE you will mirror the entire archive.
+# (optional)
+
+EXCLUDE="--exclude binary-kfreebsd-i386/ --exclude *_knetbsd-i386.deb \
+         --exclude source/ --exclude *.orig.tar.gz --exclude *.diff.gz \
+         --exclude /bochs/ --exclude /obsolete/ \
+         --exclude *kfreebsd* --exclude *m68* --exclude *sh* \
+	 "
+
+# MAILTO is the address to send logfiles to;
+# if it is not defined, no mail will be sent
+# (optional)
+
+MAILTO=
+
+# There should be no need to edit anything below this point, unless there
+# are problems.
+
+#-----------------------------------------------------------------------------#
+
+# Check for some environment variables
+if [ -z $TO ] || [ -z $RSYNC_HOST ] || [ -z $RSYNC_DIR ] || [ -z $LOGDIR ]; then
+	echo "One of the following variables seems to be empty:"
+	echo "TO, RSYNC_HOST, RSYNC_DIR or LOGDIR"
+	exit 2
+fi
+
+if ! [ -d ${TO}/project/trace/ ]; then
+	# we are running mirror script for the first time
+	mkdir -p ${TO}/project/trace
+fi
+
+# Note: on some non-Debian systems, hostname doesn't accept -f option.
+# If that's the case on your system, make sure hostname prints the full
+# hostname, and remove the -f option. If there's no hostname command,
+# explicitly replace `hostname -f` with the hostname.
+HOSTNAME=`hostname -f`
+
+LOCK="${TO}/Archive-Update-in-Progress-${HOSTNAME}"
+
+# Exclude architectures defined in $ARCH_EXCLUDE
+for ARCH in $ARCH_EXCLUDE; do
+	EXCLUDE=$EXCLUDE"\
+		--exclude binary-$ARCH/ \
+		--exclude disks-$ARCH/ \
+		--exclude installer-$ARCH/ \
+		--exclude Contents-$ARCH \
+		--exclude Contents-$ARCH.gz \
+		--exclude *_$ARCH.deb \
+		--exclude *_$ARCH.udeb \
+		--exclude pool-$ARCH/"
+	if [ "$ARCH" == "source" ]; then
+		SOURCE_EXCLUDE="\
+		--exclude *.tar.gz \
+		--exclude *.diff.gz \
+		--exclude *.dsc "
+	fi
+done
+
+# Logfile
+LOGFILE=$LOGDIR/debian-mirror-ports.log
+
+# Get in the right directory and set the umask to be group writable
+# 
+cd $HOME
+umask 002
+
+# Check to see if another sync is in progress
+if lockfile -! -l 10800 -r 0 "$LOCK"; then
+  echo ${HOSTNAME} is unable to start rsync, lock file exists
+  exit 1
+fi
+# Note: on some non-Debian systems, trap doesn't accept "exit" as signal
+# specification. If that's the case on your system, try using "0".
+trap "rm -f $LOCK > /dev/null 2>&1" exit
+
+set +e
+
+# First sync /pool-*
+rsync --recursive --links --hard-links --times --verbose \
+     $EXCLUDE $SOURCE_EXCLUDE \
+     $RSYNC_HOST::$RSYNC_DIR/pool-* $TO >> $LOGFILE 2>&1
+result=$?
+
+if [ 0 = $result ]; then
+	# Now sync the remaining stuff
+	rsync --recursive --links --hard-links --times --verbose --delete-after \
+	     --exclude "Archive-Update-in-Progress-${HOSTNAME}" \
+	     --exclude "project/trace/" \
+	     --exclude "/pool-*/" \
+	     $EXCLUDE \
+	     $RSYNC_HOST::$RSYNC_DIR $TO >> $LOGFILE 2>&1
+
+	date -u > "${TO}/project/trace/${HOSTNAME}"
+else
+	echo "ERROR: Help, something weird happened" | tee -a $LOGFILE
+	echo "mirroring /pool-* exited with exitcode" $result | tee -a $LOGFILE
+fi
+
+
+if ! [ -z $MAILTO ]; then
+	mail -s "debian ports archive synced" $MAILTO < $LOGFILE
+fi
+
+savelog $LOGFILE