Bug Summary

File:obj-scan-build/../linux/src/drivers/scsi/aha1542.c
Location:line 313, column 5
Description:Value stored to 'debug' is never read

Annotated Source Code

1/* $Id: aha1542.c,v 1.1 1999/04/26 05:54:11 tb Exp $
2 * linux/kernel/aha1542.c
3 *
4 * Copyright (C) 1992 Tommy Thorn
5 * Copyright (C) 1993, 1994, 1995 Eric Youngdale
6 *
7 * Modified by Eric Youngdale
8 * Use request_irq and request_dma to help prevent unexpected conflicts
9 * Set up on-board DMA controller, such that we do not have to
10 * have the bios enabled to use the aha1542.
11 * Modified by David Gentzel
12 * Don't call request_dma if dma mask is 0 (for BusLogic BT-445S VL-Bus
13 * controller).
14 * Modified by Matti Aarnio
15 * Accept parameters from LILO cmd-line. -- 1-Oct-94
16 * Modified by Mike McLagan <mike.mclagan@linux.org>
17 * Recognise extended mode on AHA1542CP, different bit than 1542CF
18 * 1-Jan-97
19 * Modified by Bjorn L. Thordarson and Einar Thor Einarsson
20 * Recognize that DMA0 is valid DMA channel -- 13-Jul-98
21 */
22
23#include <linux/module.h>
24
25#include <linux/kernel.h>
26#include <linux/head.h>
27#include <linux/types.h>
28#include <linux/string.h>
29#include <linux/ioport.h>
30#include <linux/delay.h>
31#include <linux/sched.h>
32#include <linux/proc_fs.h>
33#include <asm/dma.h>
34#include <asm/system.h>
35#include <asm/io.h>
36#include <linux/blk.h>
37#include "scsi.h"
38#include "hosts.h"
39
40
41#include "aha1542.h"
42
43#include<linux/stat.h>
44
45struct proc_dir_entry proc_scsi_aha1542 = {
46 PROC_SCSI_AHA1542, 7, "aha1542",
47 S_IFDIR0040000 | S_IRUGO(00400|00040|00004) | S_IXUGO(00100|00010|00001), 2
48};
49
50#ifdef DEBUG
51#define DEB(x) x
52#else
53#define DEB(x)
54#endif
55/*
56static const char RCSid[] = "$Header: cvs/gnumach/linux/src/drivers/scsi/Attic/aha1542.c,v 1.1 1999/04/26 05:54:11 tb Exp $";
57*/
58
59/* The adaptec can be configured for quite a number of addresses, but
60I generally do not want the card poking around at random. We allow
61two addresses - this allows people to use the Adaptec with a Midi
62card, which also used 0x330 -- can be overridden with LILO! */
63
64#define MAXBOARDS2 2 /* Increase this and the sizes of the
65 arrays below, if you need more.. */
66
67static unsigned int bases[MAXBOARDS2]={0x330, 0x334};
68
69/* set by aha1542_setup according to the command line */
70static int setup_called[MAXBOARDS2] = {0,0};
71static int setup_buson[MAXBOARDS2] = {0,0};
72static int setup_busoff[MAXBOARDS2] = {0,0};
73static int setup_dmaspeed[MAXBOARDS2] = {-1,-1};
74
75static char *setup_str[MAXBOARDS2] = {(char *)NULL((void *) 0),(char *)NULL((void *) 0)};
76
77/*
78 * LILO params: aha1542=<PORTBASE>[,<BUSON>,<BUSOFF>[,<DMASPEED>]]
79 *
80 * Where: <PORTBASE> is any of the valid AHA addresses:
81 * 0x130, 0x134, 0x230, 0x234, 0x330, 0x334
82 * <BUSON> is the time (in microsecs) that AHA spends on the AT-bus
83 * when transferring data. 1542A power-on default is 11us,
84 * valid values are in range: 2..15 (decimal)
85 * <BUSOFF> is the time that AHA spends OFF THE BUS after while
86 * it is transferring data (not to monopolize the bus).
87 * Power-on default is 4us, valid range: 1..64 microseconds.
88 * <DMASPEED> Default is jumper selected (1542A: on the J1),
89 * but experimenter can alter it with this.
90 * Valid values: 5, 6, 7, 8, 10 (MB/s)
91 * Factory default is 5 MB/s.
92 */
93
94#define BIOS_TRANSLATION_16320 0 /* Used by some old 1542A boards */
95#define BIOS_TRANSLATION_64321 1 /* Default case these days */
96#define BIOS_TRANSLATION_255632 2 /* Big disk case */
97
98struct aha1542_hostdata{
99 /* This will effectively start both of them at the first mailbox */
100 int bios_translation; /* Mapping bios uses - for compatibility */
101 int aha1542_last_mbi_used;
102 int aha1542_last_mbo_used;
103 Scsi_Cmnd * SCint[AHA1542_MAILBOXES8];
104 struct mailbox mb[2*AHA1542_MAILBOXES8];
105 struct ccb ccb[AHA1542_MAILBOXES8];
106};
107
108#define HOSTDATA(host)((struct aha1542_hostdata *) &host->hostdata) ((struct aha1542_hostdata *) &host->hostdata)
109
110static struct Scsi_Host * aha_host[7] = {NULL((void *) 0),}; /* One for each IRQ level (9-15) */
111
112
113
114
115#define WAITnexttimeout3000000 3000000
116
117static void setup_mailboxes(int base_io, struct Scsi_Host * shpnt);
118static int aha1542_restart(struct Scsi_Host * shost);
119
120#define aha1542_intr_reset(base)((__builtin_constant_p((base)) && (base) < 256) ? __outbc
((0x20),(base)) : __outb((0x20),(base))) outb(IRST, CONTROL(base))((__builtin_constant_p((base)) && (base) < 256) ? __outbc
((0x20),(base)) : __outb((0x20),(base)))
121
122#define WAIT(port, mask, allof, noneof){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((port)) && (
port) < 256) ? __inbc(port) : __inb(port)) & (mask); if
((WAITbits & (allof)) == (allof) && ((WAITbits &
(noneof)) == 0)) break; if (--WAITtimeout == 0) goto fail; }
} \
123 { register int WAITbits; \
124 register int WAITtimeout = WAITnexttimeout3000000; \
125 while (1) { \
126 WAITbits = inb(port)((__builtin_constant_p((port)) && (port) < 256) ? __inbc
(port) : __inb(port)) & (mask); \
127 if ((WAITbits & (allof)) == (allof) && ((WAITbits & (noneof)) == 0)) \
128 break; \
129 if (--WAITtimeout == 0) goto fail; \
130 } \
131 }
132
133/* Similar to WAIT, except we use the udelay call to regulate the
134 amount of time we wait. */
135#define WAITd(port, mask, allof, noneof, timeout){ register int WAITbits; register int WAITtimeout = timeout; while
(1) { WAITbits = ((__builtin_constant_p((port)) && (
port) < 256) ? __inbc(port) : __inb(port)) & (mask); if
((WAITbits & (allof)) == (allof) && ((WAITbits &
(noneof)) == 0)) break; (__builtin_constant_p(1000) ? __const_udelay
((1000) * 0x10c6ul) : __udelay(1000)); if (--WAITtimeout == 0
) goto fail; } } \
136 { register int WAITbits; \
137 register int WAITtimeout = timeout; \
138 while (1) { \
139 WAITbits = inb(port)((__builtin_constant_p((port)) && (port) < 256) ? __inbc
(port) : __inb(port)) & (mask); \
140 if ((WAITbits & (allof)) == (allof) && ((WAITbits & (noneof)) == 0)) \
141 break; \
142 udelay(1000)(__builtin_constant_p(1000) ? __const_udelay((1000) * 0x10c6ul
) : __udelay(1000)); \
143 if (--WAITtimeout == 0) goto fail; \
144 } \
145 }
146
147static void aha1542_stat(void)
148{
149/* int s = inb(STATUS), i = inb(INTRFLAGS);
150 printk("status=%x intrflags=%x\n", s, i, WAITnexttimeout-WAITtimeout); */
151}
152
153/* This is a bit complicated, but we need to make sure that an interrupt
154 routine does not send something out while we are in the middle of this.
155 Fortunately, it is only at boot time that multi-byte messages
156 are ever sent. */
157static int aha1542_out(unsigned int base, unchar *cmdp, int len)
158{
159 unsigned long flags = 0;
160
161 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
162 if(len == 1) {
163 while(1==1){
164 WAIT(STATUS(base), CDF, 0, CDF){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((base)) && (
base) < 256) ? __inbc(base) : __inb(base)) & (0x08); if
((WAITbits & (0)) == (0) && ((WAITbits & (0x08
)) == 0)) break; if (--WAITtimeout == 0) goto fail; } };
165 cli()__asm__ __volatile__ ("cli": : :"memory");
166 if(inb(STATUS(base))((__builtin_constant_p((base)) && (base) < 256) ? __inbc
(base) : __inb(base)) & CDF0x08) {restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); continue;}
167 outb(*cmdp, DATA(base))((__builtin_constant_p(((base+1))) && ((base+1)) <
256) ? __outbc((*cmdp),((base+1))) : __outb((*cmdp),((base+1
))));
168 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
169 return 0;
170 }
171 } else {
172 cli()__asm__ __volatile__ ("cli": : :"memory");
173 while (len--)
174 {
175 WAIT(STATUS(base), CDF, 0, CDF){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((base)) && (
base) < 256) ? __inbc(base) : __inb(base)) & (0x08); if
((WAITbits & (0)) == (0) && ((WAITbits & (0x08
)) == 0)) break; if (--WAITtimeout == 0) goto fail; } };
176 outb(*cmdp++, DATA(base))((__builtin_constant_p(((base+1))) && ((base+1)) <
256) ? __outbc((*cmdp++),((base+1))) : __outb((*cmdp++),((base
+1))));
177 }
178 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
179 }
180 return 0;
181 fail:
182 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
183 printk("aha1542_out failed(%d): ", len+1); aha1542_stat();
184 return 1;
185}
186
187/* Only used at boot time, so we do not need to worry about latency as much
188 here */
189static int aha1542_in(unsigned int base, unchar *cmdp, int len)
190{
191 unsigned long flags;
192
193 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
194 cli()__asm__ __volatile__ ("cli": : :"memory");
195 while (len--)
196 {
197 WAIT(STATUS(base), DF, DF, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((base)) && (
base) < 256) ? __inbc(base) : __inb(base)) & (0x04); if
((WAITbits & (0x04)) == (0x04) && ((WAITbits &
(0)) == 0)) break; if (--WAITtimeout == 0) goto fail; } };
198 *cmdp++ = inb(DATA(base))((__builtin_constant_p(((base+1))) && ((base+1)) <
256) ? __inbc((base+1)) : __inb((base+1)));
199 }
200 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
201 return 0;
202 fail:
203 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
204 printk("aha1542_in failed(%d): ", len+1); aha1542_stat();
205 return 1;
206}
207
208/* Similar to aha1542_in, except that we wait a very short period of time.
209 We use this if we know the board is alive and awake, but we are not sure
210 if the board will respond to the command we are about to send or not */
211static int aha1542_in1(unsigned int base, unchar *cmdp, int len)
212{
213 unsigned long flags;
214
215 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
216 cli()__asm__ __volatile__ ("cli": : :"memory");
217 while (len--)
218 {
219 WAITd(STATUS(base), DF, DF, 0, 100){ register int WAITbits; register int WAITtimeout = 100; while
(1) { WAITbits = ((__builtin_constant_p((base)) && (
base) < 256) ? __inbc(base) : __inb(base)) & (0x04); if
((WAITbits & (0x04)) == (0x04) && ((WAITbits &
(0)) == 0)) break; (__builtin_constant_p(1000) ? __const_udelay
((1000) * 0x10c6ul) : __udelay(1000)); if (--WAITtimeout == 0
) goto fail; } };
220 *cmdp++ = inb(DATA(base))((__builtin_constant_p(((base+1))) && ((base+1)) <
256) ? __inbc((base+1)) : __inb((base+1)));
221 }
222 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
223 return 0;
224 fail:
225 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
226 return 1;
227}
228
229static int makecode(unsigned hosterr, unsigned scsierr)
230{
231 switch (hosterr) {
232 case 0x0:
233 case 0xa: /* Linked command complete without error and linked normally */
234 case 0xb: /* Linked command complete without error, interrupt generated */
235 hosterr = 0;
236 break;
237
238 case 0x11: /* Selection time out-The initiator selection or target
239 reselection was not complete within the SCSI Time out period */
240 hosterr = DID_TIME_OUT0x03;
241 break;
242
243 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
244 than was allocated by the Data Length field or the sum of the
245 Scatter / Gather Data Length fields. */
246
247 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
248
249 case 0x15: /* MBO command was not 00, 01 or 02-The first byte of the CB was
250 invalid. This usually indicates a software failure. */
251
252 case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid.
253 This usually indicates a software failure. */
254
255 case 0x17: /* Linked CCB does not have the same LUN-A subsequent CCB of a set
256 of linked CCB's does not specify the same logical unit number as
257 the first. */
258 case 0x18: /* Invalid Target Direction received from Host-The direction of a
259 Target Mode CCB was invalid. */
260
261 case 0x19: /* Duplicate CCB Received in Target Mode-More than once CCB was
262 received to service data transfer between the same target LUN
263 and initiator SCSI ID in the same direction. */
264
265 case 0x1a: /* Invalid CCB or Segment List Parameter-A segment list with a zero
266 length segment or invalid segment list boundaries was received.
267 A CCB parameter was invalid. */
268 DEB(printk("Aha1542: %x %x\n", hosterr, scsierr));
269 hosterr = DID_ERROR0x07; /* Couldn't find any better */
270 break;
271
272 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
273 phase sequence was requested by the target. The host adapter
274 will generate a SCSI Reset Condition, notifying the host with
275 a SCRD interrupt */
276 hosterr = DID_RESET0x08;
277 break;
278 default:
279 printk("makecode: unknown hoststatus %x\n", hosterr);
280 break;
281 }
282 return scsierr|(hosterr << 16);
283}
284
285static int aha1542_test_port(int bse, struct Scsi_Host * shpnt)
286{
287 int i;
288 unchar inquiry_cmd[] = {CMD_INQUIRY0x04 };
289 unchar inquiry_result[4];
290 unchar *cmdp;
291 int len;
292 volatile int debug = 0;
293
294 /* Quick and dirty test for presence of the card. */
295 if(inb(STATUS(bse))((__builtin_constant_p((bse)) && (bse) < 256) ? __inbc
(bse) : __inb(bse)) == 0xff) return 0;
296
297 /* Reset the adapter. I ought to make a hard reset, but it's not really necessary */
298
299 /* DEB(printk("aha1542_test_port called \n")); */
300
301 /* In case some other card was probing here, reset interrupts */
302 aha1542_intr_reset(bse)((__builtin_constant_p((bse)) && (bse) < 256) ? __outbc
((0x20),(bse)) : __outb((0x20),(bse))); /* reset interrupts, so they don't block */
303
304 outb(SRST|IRST/*|SCRST*/, CONTROL(bse))((__builtin_constant_p((bse)) && (bse) < 256) ? __outbc
((0x40|0x20),(bse)) : __outb((0x40|0x20),(bse)));
305
306 i = jiffies + 2;
307 while (i>jiffies); /* Wait a little bit for things to settle down. */
308
309 debug = 1;
310 /* Expect INIT and IDLE, any of the others are bad */
311 WAIT(STATUS(bse), STATMASK, INIT|IDLE, STST|DIAGF|INVDCMD|DF|CDF){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((bse)) && (bse
) < 256) ? __inbc(bse) : __inb(bse)) & (0xfd); if ((WAITbits
& (0x20|0x10)) == (0x20|0x10) && ((WAITbits &
(0x80|0x40|0x01|0x04|0x08)) == 0)) break; if (--WAITtimeout ==
0) goto fail; } };
312
313 debug = 2;
Value stored to 'debug' is never read
314 /* Shouldn't have generated any interrupts during reset */
315 if (inb(INTRFLAGS(bse))((__builtin_constant_p(((bse+2))) && ((bse+2)) < 256
) ? __inbc((bse+2)) : __inb((bse+2)))&INTRMASK0x8f) goto fail;
316
317
318 /* Perform a host adapter inquiry instead so we do not need to set
319 up the mailboxes ahead of time */
320
321 aha1542_out(bse, inquiry_cmd, 1);
322
323 debug = 3;
324 len = 4;
325 cmdp = &inquiry_result[0];
326
327 while (len--)
328 {
329 WAIT(STATUS(bse), DF, DF, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((bse)) && (bse
) < 256) ? __inbc(bse) : __inb(bse)) & (0x04); if ((WAITbits
& (0x04)) == (0x04) && ((WAITbits & (0)) == 0
)) break; if (--WAITtimeout == 0) goto fail; } };
330 *cmdp++ = inb(DATA(bse))((__builtin_constant_p(((bse+1))) && ((bse+1)) < 256
) ? __inbc((bse+1)) : __inb((bse+1)));
331 }
332
333 debug = 8;
334 /* Reading port should reset DF */
335 if (inb(STATUS(bse))((__builtin_constant_p((bse)) && (bse) < 256) ? __inbc
(bse) : __inb(bse)) & DF0x04) goto fail;
336
337 debug = 9;
338 /* When HACC, command is completed, and we're though testing */
339 WAIT(INTRFLAGS(bse), HACC, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((bse+2))) &&
((bse+2)) < 256) ? __inbc((bse+2)) : __inb((bse+2))) &
(0x04); if ((WAITbits & (0x04)) == (0x04) && ((WAITbits
& (0)) == 0)) break; if (--WAITtimeout == 0) goto fail; }
};
340 /* now initialize adapter */
341
342 debug = 10;
343 /* Clear interrupts */
344 outb(IRST, CONTROL(bse))((__builtin_constant_p((bse)) && (bse) < 256) ? __outbc
((0x20),(bse)) : __outb((0x20),(bse)));
345
346 debug = 11;
347
348 return debug; /* 1 = ok */
349 fail:
350 return 0; /* 0 = not ok */
351}
352
353/* A "high" level interrupt handler */
354static void aha1542_intr_handle(int irq, void *dev_id, struct pt_regs *regs)
355{
356 void (*my_done)(Scsi_Cmnd *) = NULL((void *) 0);
357 int errstatus, mbi, mbo, mbistatus;
358 int number_serviced;
359 unsigned long flags;
360 struct Scsi_Host * shost;
361 Scsi_Cmnd * SCtmp;
362 int flag;
363 int needs_restart;
364 struct mailbox * mb;
365 struct ccb *ccb;
366
367 shost = aha_host[irq - 9];
368 if(!shost) panic("Splunge!");
369
370 mb = HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->mb;
371 ccb = HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->ccb;
372
373#ifdef DEBUG
374 {
375 flag = inb(INTRFLAGS(shost->io_port))((__builtin_constant_p(((shost->io_port+2))) && ((
shost->io_port+2)) < 256) ? __inbc((shost->io_port+2
)) : __inb((shost->io_port+2)));
376 printk("aha1542_intr_handle: ");
377 if (!(flag&ANYINTR0x80)) printk("no interrupt?");
378 if (flag&MBIF0x01) printk("MBIF ");
379 if (flag&MBOA0x02) printk("MBOF ");
380 if (flag&HACC0x04) printk("HACC ");
381 if (flag&SCRD0x08) printk("SCRD ");
382 printk("status %02x\n", inb(STATUS(shost->io_port))((__builtin_constant_p((shost->io_port)) && (shost
->io_port) < 256) ? __inbc(shost->io_port) : __inb(shost
->io_port)));
383 };
384#endif
385 number_serviced = 0;
386 needs_restart = 0;
387
388 while(1==1){
389 flag = inb(INTRFLAGS(shost->io_port))((__builtin_constant_p(((shost->io_port+2))) && ((
shost->io_port+2)) < 256) ? __inbc((shost->io_port+2
)) : __inb((shost->io_port+2)));
390
391 /* Check for unusual interrupts. If any of these happen, we should
392 probably do something special, but for now just printing a message
393 is sufficient. A SCSI reset detected is something that we really
394 need to deal with in some way. */
395 if (flag & ~MBIF0x01) {
396 if (flag&MBOA0x02) printk("MBOF ");
397 if (flag&HACC0x04) printk("HACC ");
398 if (flag&SCRD0x08) {
399 needs_restart = 1;
400 printk("SCRD ");
401 }
402 }
403
404 aha1542_intr_reset(shost->io_port)((__builtin_constant_p((shost->io_port)) && (shost
->io_port) < 256) ? __outbc((0x20),(shost->io_port))
: __outb((0x20),(shost->io_port)));
405
406 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
407 cli()__asm__ __volatile__ ("cli": : :"memory");
408 mbi = HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->aha1542_last_mbi_used + 1;
409 if (mbi >= 2*AHA1542_MAILBOXES8) mbi = AHA1542_MAILBOXES8;
410
411 do{
412 if(mb[mbi].status != 0) break;
413 mbi++;
414 if (mbi >= 2*AHA1542_MAILBOXES8) mbi = AHA1542_MAILBOXES8;
415 } while (mbi != HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->aha1542_last_mbi_used);
416
417 if(mb[mbi].status == 0){
418 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
419 /* Hmm, no mail. Must have read it the last time around */
420 if (!number_serviced && !needs_restart)
421 printk("aha1542.c: interrupt received, but no mail.\n");
422 /* We detected a reset. Restart all pending commands for
423 devices that use the hard reset option */
424 if(needs_restart) aha1542_restart(shost);
425 return;
426 };
427
428 mbo = (scsi2int(mb[mbi].ccbptr)( (((long)*(mb[mbi].ccbptr)) << 16) + (((long)(mb[mbi].
ccbptr)[1]) << 8) + ((long)(mb[mbi].ccbptr)[2]) ) - ((unsigned int) &ccb[0])) / sizeof(struct ccb);
429 mbistatus = mb[mbi].status;
430 mb[mbi].status = 0;
431 HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->aha1542_last_mbi_used = mbi;
432 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
433
434#ifdef DEBUG
435 {
436 if (ccb[mbo].tarstat|ccb[mbo].hastat)
437 printk("aha1542_command: returning %x (status %d)\n",
438 ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status);
439 };
440#endif
441
442 if(mbistatus == 3) continue; /* Aborted command not found */
443
444#ifdef DEBUG
445 printk("...done %d %d\n",mbo, mbi);
446#endif
447
448 SCtmp = HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->SCint[mbo];
449
450 if (!SCtmp || !SCtmp->scsi_done) {
451 printk("aha1542_intr_handle: Unexpected interrupt\n");
452 printk("tarstat=%x, hastat=%x idlun=%x ccb#=%d \n", ccb[mbo].tarstat,
453 ccb[mbo].hastat, ccb[mbo].idlun, mbo);
454 return;
455 }
456
457 my_done = SCtmp->scsi_done;
458 if (SCtmp->host_scribble) scsi_free(SCtmp->host_scribble, 512);
459
460 /* Fetch the sense data, and tuck it away, in the required slot. The
461 Adaptec automatically fetches it, and there is no guarantee that
462 we will still have it in the cdb when we come back */
463 if (ccb[mbo].tarstat == 2)
464 memcpy(SCtmp->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen],(__builtin_constant_p(sizeof(SCtmp->sense_buffer)) ? __constant_memcpy
((SCtmp->sense_buffer),(&ccb[mbo].cdb[ccb[mbo].cdblen]
),(sizeof(SCtmp->sense_buffer))) : __memcpy((SCtmp->sense_buffer
),(&ccb[mbo].cdb[ccb[mbo].cdblen]),(sizeof(SCtmp->sense_buffer
))))
465 sizeof(SCtmp->sense_buffer))(__builtin_constant_p(sizeof(SCtmp->sense_buffer)) ? __constant_memcpy
((SCtmp->sense_buffer),(&ccb[mbo].cdb[ccb[mbo].cdblen]
),(sizeof(SCtmp->sense_buffer))) : __memcpy((SCtmp->sense_buffer
),(&ccb[mbo].cdb[ccb[mbo].cdblen]),(sizeof(SCtmp->sense_buffer
))));
466
467
468 /* is there mail :-) */
469
470 /* more error checking left out here */
471 if (mbistatus != 1)
472 /* This is surely wrong, but I don't know what's right */
473 errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat);
474 else
475 errstatus = 0;
476
477#ifdef DEBUG
478 if(errstatus) printk("(aha1542 error:%x %x %x) ",errstatus,
479 ccb[mbo].hastat, ccb[mbo].tarstat);
480#endif
481
482 if (ccb[mbo].tarstat == 2) {
483#ifdef DEBUG
484 int i;
485#endif
486 DEB(printk("aha1542_intr_handle: sense:"));
487#ifdef DEBUG
488 for (i = 0; i < 12; i++)
489 printk("%02x ", ccb[mbo].cdb[ccb[mbo].cdblen+i]);
490 printk("\n");
491#endif
492 /*
493 DEB(printk("aha1542_intr_handle: buf:"));
494 for (i = 0; i < bufflen; i++)
495 printk("%02x ", ((unchar *)buff)[i]);
496 printk("\n");
497 */
498 }
499 DEB(if (errstatus) printk("aha1542_intr_handle: returning %6x\n", errstatus));
500 SCtmp->result = errstatus;
501 HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->SCint[mbo] = NULL((void *) 0); /* This effectively frees up the mailbox slot, as
502 far as queuecommand is concerned */
503 my_done(SCtmp);
504 number_serviced++;
505 };
506}
507
508int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
509{
510 unchar ahacmd = CMD_START_SCSI0x02;
511 unchar direction;
512 unchar *cmd = (unchar *) SCpnt->cmnd;
513 unchar target = SCpnt->target;
514 unchar lun = SCpnt->lun;
515 unsigned long flags;
516 void *buff = SCpnt->request_buffer;
517 int bufflen = SCpnt->request_bufflen;
518 int mbo;
519 struct mailbox * mb;
520 struct ccb *ccb;
521
522 DEB(int i);
523
524 mb = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->mb;
525 ccb = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->ccb;
526
527 DEB(if (target > 1) {
528 SCpnt->result = DID_TIME_OUT << 16;
529 done(SCpnt); return 0;});
530
531 if(*cmd == REQUEST_SENSE0x03){
532#ifndef DEBUG
533 if (bufflen != sizeof(SCpnt->sense_buffer)) {
534 printk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
535 };
536#endif
537 SCpnt->result = 0;
538 done(SCpnt);
539 return 0;
540 };
541
542#ifdef DEBUG
543 if (*cmd == READ_100x28 || *cmd == WRITE_100x2a)
544 i = xscsi2int(cmd+2)( (((long)(cmd+2)[0]) << 24) + (((long)(cmd+2)[1]) <<
16) + (((long)(cmd+2)[2]) << 8) + ((long)(cmd+2)[3]) );
545 else if (*cmd == READ_60x08 || *cmd == WRITE_60x0a)
546 i = scsi2int(cmd+2)( (((long)*(cmd+2)) << 16) + (((long)(cmd+2)[1]) <<
8) + ((long)(cmd+2)[2]) );
547 else
548 i = -1;
549 if (done)
550 printk("aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
551 else
552 printk("aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
553 aha1542_stat();
554 printk("aha1542_queuecommand: dumping scsi cmd:");
555 for (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
556 printk("\n");
557 if (*cmd == WRITE_100x2a || *cmd == WRITE_60x0a)
558 return 0; /* we are still testing, so *don't* write */
559#endif
560/* Use the outgoing mailboxes in a round-robin fashion, because this
561 is how the host adapter will scan for them */
562
563 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
564 cli()__asm__ __volatile__ ("cli": : :"memory");
565 mbo = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->aha1542_last_mbo_used + 1;
566 if (mbo >= AHA1542_MAILBOXES8) mbo = 0;
567
568 do{
569 if(mb[mbo].status == 0 && HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[mbo] == NULL((void *) 0))
570 break;
571 mbo++;
572 if (mbo >= AHA1542_MAILBOXES8) mbo = 0;
573 } while (mbo != HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->aha1542_last_mbo_used);
574
575 if(mb[mbo].status || HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[mbo])
576 panic("Unable to find empty mailbox for aha1542.\n");
577
578 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[mbo] = SCpnt; /* This will effectively prevent someone else from
579 screwing with this cdb. */
580
581 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->aha1542_last_mbo_used = mbo;
582 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
583
584#ifdef DEBUG
585 printk("Sending command (%d %x)...",mbo, done);
586#endif
587
588 any2scsi(mb[mbo].ccbptr, &ccb[mbo])(mb[mbo].ccbptr)[0] = (((unsigned long)(&ccb[mbo])) >>
16) ; (mb[mbo].ccbptr)[1] = (((unsigned long)(&ccb[mbo])
) >> 8); (mb[mbo].ccbptr)[2] = ((unsigned long)(&ccb
[mbo]));; /* This gets trashed for some reason*/
589
590 memset(&ccb[mbo], 0, sizeof(struct ccb))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(struct
ccb))) ? __constant_c_and_count_memset(((&ccb[mbo])),((0x01010101UL
*(unsigned char)(0))),((sizeof(struct ccb)))) : __constant_c_memset
(((&ccb[mbo])),((0x01010101UL*(unsigned char)(0))),((sizeof
(struct ccb))))) : (__builtin_constant_p((sizeof(struct ccb))
) ? __memset_generic((((&ccb[mbo]))),(((0))),(((sizeof(struct
ccb))))) : __memset_generic(((&ccb[mbo])),((0)),((sizeof
(struct ccb))))));
591
592 ccb[mbo].cdblen = SCpnt->cmd_len;
593
594 direction = 0;
595 if (*cmd == READ_100x28 || *cmd == READ_60x08)
596 direction = 8;
597 else if (*cmd == WRITE_100x2a || *cmd == WRITE_60x0a)
598 direction = 16;
599
600 memcpy(ccb[mbo].cdb, cmd, ccb[mbo].cdblen)(__builtin_constant_p(ccb[mbo].cdblen) ? __constant_memcpy((ccb
[mbo].cdb),(cmd),(ccb[mbo].cdblen)) : __memcpy((ccb[mbo].cdb)
,(cmd),(ccb[mbo].cdblen)));
601
602 if (SCpnt->use_sg) {
603 struct scatterlist * sgpnt;
604 struct chain * cptr;
605#ifdef DEBUG
606 unsigned char * ptr;
607#endif
608 int i;
609 ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather*/
610 SCpnt->host_scribble = (unsigned char *) scsi_malloc(512);
611 sgpnt = (struct scatterlist *) SCpnt->request_buffer;
612 cptr = (struct chain *) SCpnt->host_scribble;
613 if (cptr == NULL((void *) 0)) panic("aha1542.c: unable to allocate DMA memory\n");
614 for(i=0; i<SCpnt->use_sg; i++) {
615 if(sgpnt[i].length == 0 || SCpnt->use_sg > 16 ||
616 (((int)sgpnt[i].address) & 1) || (sgpnt[i].length & 1)){
617 unsigned char * ptr;
618 printk("Bad segment list supplied to aha1542.c (%d, %d)\n",SCpnt->use_sg,i);
619 for(i=0;i<SCpnt->use_sg;i++){
620 printk("%d: %x %x %d\n",i,(unsigned int) sgpnt[i].address, (unsigned int) sgpnt[i].alt_address,
621 sgpnt[i].length);
622 };
623 printk("cptr %x: ",(unsigned int) cptr);
624 ptr = (unsigned char *) &cptr[i];
625 for(i=0;i<18;i++) printk("%02x ", ptr[i]);
626 panic("Foooooooood fight!");
627 };
628 any2scsi(cptr[i].dataptr, sgpnt[i].address)(cptr[i].dataptr)[0] = (((unsigned long)(sgpnt[i].address)) >>
16) ; (cptr[i].dataptr)[1] = (((unsigned long)(sgpnt[i].address
)) >> 8); (cptr[i].dataptr)[2] = ((unsigned long)(sgpnt
[i].address));;
629 if(((unsigned int) sgpnt[i].address) & 0xff000000) goto baddma;
630 any2scsi(cptr[i].datalen, sgpnt[i].length)(cptr[i].datalen)[0] = (((unsigned long)(sgpnt[i].length)) >>
16) ; (cptr[i].datalen)[1] = (((unsigned long)(sgpnt[i].length
)) >> 8); (cptr[i].datalen)[2] = ((unsigned long)(sgpnt
[i].length));;
631 };
632 any2scsi(ccb[mbo].datalen, SCpnt->use_sg * sizeof(struct chain))(ccb[mbo].datalen)[0] = (((unsigned long)(SCpnt->use_sg * sizeof
(struct chain))) >> 16) ; (ccb[mbo].datalen)[1] = (((unsigned
long)(SCpnt->use_sg * sizeof(struct chain))) >> 8);
(ccb[mbo].datalen)[2] = ((unsigned long)(SCpnt->use_sg * sizeof
(struct chain)));;
633 any2scsi(ccb[mbo].dataptr, cptr)(ccb[mbo].dataptr)[0] = (((unsigned long)(cptr)) >> 16)
; (ccb[mbo].dataptr)[1] = (((unsigned long)(cptr)) >> 8
); (ccb[mbo].dataptr)[2] = ((unsigned long)(cptr));;
634#ifdef DEBUG
635 printk("cptr %x: ",cptr);
636 ptr = (unsigned char *) cptr;
637 for(i=0;i<18;i++) printk("%02x ", ptr[i]);
638#endif
639 } else {
640 ccb[mbo].op = 0; /* SCSI Initiator Command */
641 SCpnt->host_scribble = NULL((void *) 0);
642 any2scsi(ccb[mbo].datalen, bufflen)(ccb[mbo].datalen)[0] = (((unsigned long)(bufflen)) >> 16
) ; (ccb[mbo].datalen)[1] = (((unsigned long)(bufflen)) >>
8); (ccb[mbo].datalen)[2] = ((unsigned long)(bufflen));;
643 if(((unsigned int) buff & 0xff000000)) goto baddma;
644 any2scsi(ccb[mbo].dataptr, buff)(ccb[mbo].dataptr)[0] = (((unsigned long)(buff)) >> 16)
; (ccb[mbo].dataptr)[1] = (((unsigned long)(buff)) >> 8
); (ccb[mbo].dataptr)[2] = ((unsigned long)(buff));;
645 };
646 ccb[mbo].idlun = (target&7)<<5 | direction | (lun & 7); /*SCSI Target Id*/
647 ccb[mbo].rsalen = 16;
648 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
649 ccb[mbo].commlinkid = 0;
650
651#ifdef DEBUG
652 { int i;
653 printk("aha1542_command: sending.. ");
654 for (i = 0; i < sizeof(ccb[mbo])-10; i++)
655 printk("%02x ", ((unchar *)&ccb[mbo])[i]);
656 };
657#endif
658
659 if (done) {
660 DEB(printk("aha1542_queuecommand: now waiting for interrupt "); aha1542_stat());
661 SCpnt->scsi_done = done;
662 mb[mbo].status = 1;
663 aha1542_out(SCpnt->host->io_port, &ahacmd, 1); /* start scsi command */
664 DEB(aha1542_stat());
665 }
666 else
667 printk("aha1542_queuecommand: done can't be NULL\n");
668
669 return 0;
670 baddma:
671 panic("Buffer at address > 16Mb used for 1542B");
672}
673
674static void internal_done(Scsi_Cmnd * SCpnt)
675{
676 SCpnt->SCp.Status++;
677}
678
679int aha1542_command(Scsi_Cmnd * SCpnt)
680{
681 DEB(printk("aha1542_command: ..calling aha1542_queuecommand\n"));
682
683 aha1542_queuecommand(SCpnt, internal_done);
684
685 SCpnt->SCp.Status = 0;
686 while (!SCpnt->SCp.Status)
687 barrier()__asm__ __volatile__("": : :"memory");
688 return SCpnt->result;
689}
690
691/* Initialize mailboxes */
692static void setup_mailboxes(int bse, struct Scsi_Host * shpnt)
693{
694 int i;
695 struct mailbox * mb;
696 struct ccb *ccb;
697
698 unchar cmd[5] = {CMD_MBINIT0x01, AHA1542_MAILBOXES8, 0, 0, 0};
699
700 mb = HOSTDATA(shpnt)((struct aha1542_hostdata *) &shpnt->hostdata)->mb;
701 ccb = HOSTDATA(shpnt)((struct aha1542_hostdata *) &shpnt->hostdata)->ccb;
702
703 for(i=0; i<AHA1542_MAILBOXES8; i++){
704 mb[i].status = mb[AHA1542_MAILBOXES8+i].status = 0;
705 any2scsi(mb[i].ccbptr, &ccb[i])(mb[i].ccbptr)[0] = (((unsigned long)(&ccb[i])) >> 16
) ; (mb[i].ccbptr)[1] = (((unsigned long)(&ccb[i])) >>
8); (mb[i].ccbptr)[2] = ((unsigned long)(&ccb[i]));;
706 };
707 aha1542_intr_reset(bse)((__builtin_constant_p((bse)) && (bse) < 256) ? __outbc
((0x20),(bse)) : __outb((0x20),(bse))); /* reset interrupts, so they don't block */
708 any2scsi((cmd+2), mb)((cmd+2))[0] = (((unsigned long)(mb)) >> 16) ; ((cmd+2)
)[1] = (((unsigned long)(mb)) >> 8); ((cmd+2))[2] = ((unsigned
long)(mb));;
709 aha1542_out(bse, cmd, 5);
710 WAIT(INTRFLAGS(bse), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((bse+2))) &&
((bse+2)) < 256) ? __inbc((bse+2)) : __inb((bse+2))) &
(0x8f); if ((WAITbits & (0x04)) == (0x04) && ((WAITbits
& (0)) == 0)) break; if (--WAITtimeout == 0) goto fail; }
};
711 while (0) {
712 fail:
713 printk("aha1542_detect: failed setting up mailboxes\n");
714 }
715 aha1542_intr_reset(bse)((__builtin_constant_p((bse)) && (bse) < 256) ? __outbc
((0x20),(bse)) : __outb((0x20),(bse)));
716}
717
718static int aha1542_getconfig(int base_io, unsigned char * irq_level, unsigned char * dma_chan, unsigned char * scsi_id)
719{
720 unchar inquiry_cmd[] = {CMD_RETCONF0x0b };
721 unchar inquiry_result[3];
722 int i;
723 i = inb(STATUS(base_io))((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __inbc(base_io) : __inb(base_io));
724 if (i & DF0x04) {
725 i = inb(DATA(base_io))((__builtin_constant_p(((base_io+1))) && ((base_io+1)
) < 256) ? __inbc((base_io+1)) : __inb((base_io+1)));
726 };
727 aha1542_out(base_io, inquiry_cmd, 1);
728 aha1542_in(base_io, inquiry_result, 3);
729 WAIT(INTRFLAGS(base_io), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base_io+2))) &&
((base_io+2)) < 256) ? __inbc((base_io+2)) : __inb((base_io
+2))) & (0x8f); if ((WAITbits & (0x04)) == (0x04) &&
((WAITbits & (0)) == 0)) break; if (--WAITtimeout == 0) goto
fail; } };
730 while (0) {
731 fail:
732 printk("aha1542_detect: query board settings\n");
733 }
734 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
735 switch(inquiry_result[0]){
736 case 0x80:
737 *dma_chan = 7;
738 break;
739 case 0x40:
740 *dma_chan = 6;
741 break;
742 case 0x20:
743 *dma_chan = 5;
744 break;
745 case 0x01:
746 *dma_chan = 0;
747 break;
748 case 0:
749 /* This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel.
750 Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this. */
751 *dma_chan = 0xFF;
752 break;
753 default:
754 printk("Unable to determine Adaptec DMA priority. Disabling board\n");
755 return -1;
756 };
757 switch(inquiry_result[1]){
758 case 0x40:
759 *irq_level = 15;
760 break;
761 case 0x20:
762 *irq_level = 14;
763 break;
764 case 0x8:
765 *irq_level = 12;
766 break;
767 case 0x4:
768 *irq_level = 11;
769 break;
770 case 0x2:
771 *irq_level = 10;
772 break;
773 case 0x1:
774 *irq_level = 9;
775 break;
776 default:
777 printk("Unable to determine Adaptec IRQ level. Disabling board\n");
778 return -1;
779 };
780 *scsi_id=inquiry_result[2] & 7;
781 return 0;
782}
783
784/* This function should only be called for 1542C boards - we can detect
785 the special firmware settings and unlock the board */
786
787static int aha1542_mbenable(int base)
788{
789 static unchar mbenable_cmd[3];
790 static unchar mbenable_result[2];
791 int retval;
792
793 retval = BIOS_TRANSLATION_64321;
794
795 mbenable_cmd[0]=CMD_EXTBIOS0x28;
796 aha1542_out(base,mbenable_cmd,1);
797 if(aha1542_in1(base,mbenable_result,2))
798 return retval;
799 WAITd(INTRFLAGS(base),INTRMASK,HACC,0,100){ register int WAITbits; register int WAITtimeout = 100; while
(1) { WAITbits = ((__builtin_constant_p(((base+2))) &&
((base+2)) < 256) ? __inbc((base+2)) : __inb((base+2))) &
(0x8f); if ((WAITbits & (0x04)) == (0x04) && ((WAITbits
& (0)) == 0)) break; (__builtin_constant_p(1000) ? __const_udelay
((1000) * 0x10c6ul) : __udelay(1000)); if (--WAITtimeout == 0
) goto fail; } };
800 aha1542_intr_reset(base)((__builtin_constant_p((base)) && (base) < 256) ? __outbc
((0x20),(base)) : __outb((0x20),(base)));
801
802 if ((mbenable_result[0] & 0x08) || mbenable_result[1]) {
803 mbenable_cmd[0]=CMD_MBENABLE0x29;
804 mbenable_cmd[1]=0;
805 mbenable_cmd[2]=mbenable_result[1];
806
807 if((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03)) retval = BIOS_TRANSLATION_255632;
808
809 aha1542_out(base,mbenable_cmd,3);
810 WAIT(INTRFLAGS(base),INTRMASK,HACC,0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base+2))) &&
((base+2)) < 256) ? __inbc((base+2)) : __inb((base+2))) &
(0x8f); if ((WAITbits & (0x04)) == (0x04) && ((WAITbits
& (0)) == 0)) break; if (--WAITtimeout == 0) goto fail; }
};
811 };
812 while(0) {
813fail:
814 printk("aha1542_mbenable: Mailbox init failed\n");
815 }
816aha1542_intr_reset(base)((__builtin_constant_p((base)) && (base) < 256) ? __outbc
((0x20),(base)) : __outb((0x20),(base)));
817return retval;
818}
819
820/* Query the board to find out if it is a 1542 or a 1740, or whatever. */
821static int aha1542_query(int base_io, int * transl)
822{
823 unchar inquiry_cmd[] = {CMD_INQUIRY0x04 };
824 unchar inquiry_result[4];
825 int i;
826 i = inb(STATUS(base_io))((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __inbc(base_io) : __inb(base_io));
827 if (i & DF0x04) {
828 i = inb(DATA(base_io))((__builtin_constant_p(((base_io+1))) && ((base_io+1)
) < 256) ? __inbc((base_io+1)) : __inb((base_io+1)));
829 };
830 aha1542_out(base_io, inquiry_cmd, 1);
831 aha1542_in(base_io, inquiry_result, 4);
832 WAIT(INTRFLAGS(base_io), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base_io+2))) &&
((base_io+2)) < 256) ? __inbc((base_io+2)) : __inb((base_io
+2))) & (0x8f); if ((WAITbits & (0x04)) == (0x04) &&
((WAITbits & (0)) == 0)) break; if (--WAITtimeout == 0) goto
fail; } };
833 while (0) {
834 fail:
835 printk("aha1542_detect: query card type\n");
836 }
837 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
838
839 *transl = BIOS_TRANSLATION_64321; /* Default case */
840
841/* For an AHA1740 series board, we ignore the board since there is a
842 hardware bug which can lead to wrong blocks being returned if the board
843 is operating in the 1542 emulation mode. Since there is an extended mode
844 driver, we simply ignore the board and let the 1740 driver pick it up.
845*/
846
847 if (inquiry_result[0] == 0x43) {
848 printk("aha1542.c: Emulation mode not supported for AHA 174N hardware.\n");
849 return 1;
850 };
851
852 /* Always call this - boards that do not support extended bios translation
853 will ignore the command, and we will set the proper default */
854
855 *transl = aha1542_mbenable(base_io);
856
857 return 0;
858}
859
860/* called from init/main.c */
861void aha1542_setup( char *str, int *ints)
862{
863 const char *ahausage = "aha1542: usage: aha1542=<PORTBASE>[,<BUSON>,<BUSOFF>[,<DMASPEED>]]\n";
864 static int setup_idx = 0;
865 int setup_portbase;
866
867 if(setup_idx >= MAXBOARDS2)
868 {
869 printk("aha1542: aha1542_setup called too many times! Bad LILO params ?\n");
870 printk(" Entryline 1: %s\n",setup_str[0]);
871 printk(" Entryline 2: %s\n",setup_str[1]);
872 printk(" This line: %s\n",str);
873 return;
874 }
875 if (ints[0] < 1 || ints[0] > 4)
876 {
877 printk("aha1542: %s\n", str );
878 printk("%s", ahausage);
879 printk("aha1542: Wrong parameters may cause system malfunction.. We try anyway..\n");
880 }
881
882 setup_called[setup_idx]=ints[0];
883 setup_str[setup_idx]=str;
884
885 setup_portbase = ints[0] >= 1 ? ints[1] : 0; /* Preserve the default value.. */
886 setup_buson [setup_idx] = ints[0] >= 2 ? ints[2] : 7;
887 setup_busoff [setup_idx] = ints[0] >= 3 ? ints[3] : 5;
888 if (ints[0] >= 4) {
889 int atbt = -1;
890 switch (ints[4]) {
891 case 5:
892 atbt = 0x00;
893 break;
894 case 6:
895 atbt = 0x04;
896 break;
897 case 7:
898 atbt = 0x01;
899 break;
900 case 8:
901 atbt = 0x02;
902 break;
903 case 10:
904 atbt = 0x03;
905 break;
906 default:
907 printk("aha1542: %s\n", str );
908 printk("%s", ahausage);
909 printk("aha1542: Valid values for DMASPEED are 5-8, 10 MB/s. Using jumper defaults.\n");
910 break;
911 }
912 setup_dmaspeed[setup_idx] = atbt;
913 }
914
915 if (setup_portbase != 0)
916 bases[setup_idx] = setup_portbase;
917
918 ++setup_idx;
919}
920
921/* return non-zero on detection */
922int aha1542_detect(Scsi_Host_Template * tpnt)
923{
924 unsigned char dma_chan;
925 unsigned char irq_level;
926 unsigned char scsi_id;
927 unsigned long flags;
928 unsigned int base_io;
929 int trans;
930 struct Scsi_Host * shpnt = NULL((void *) 0);
931 int count = 0;
932 int indx;
933
934 DEB(printk("aha1542_detect: \n"));
935
936 tpnt->proc_dir = &proc_scsi_aha1542;
937
938 for(indx = 0; indx < sizeof(bases)/sizeof(bases[0]); indx++)
939 if(bases[indx] != 0 && !check_region(bases[indx], 4)) {
940 shpnt = scsi_register(tpnt,
941 sizeof(struct aha1542_hostdata));
942
943 /* For now we do this - until kmalloc is more intelligent
944 we are resigned to stupid hacks like this */
945 if ((unsigned int) shpnt > 0xffffff) {
946 printk("Invalid address for shpnt with 1542.\n");
947 goto unregister;
948 }
949
950 if(!aha1542_test_port(bases[indx], shpnt)) goto unregister;
951
952
953 base_io = bases[indx];
954
955 /* Set the Bus on/off-times as not to ruin floppy performance */
956 {
957 unchar oncmd[] = {CMD_BUSON_TIME0x07, 7};
958 unchar offcmd[] = {CMD_BUSOFF_TIME0x08, 5};
959
960 if(setup_called[indx])
961 {
962 oncmd[1] = setup_buson[indx];
963 offcmd[1] = setup_busoff[indx];
964 }
965
966 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
967 aha1542_out(base_io, oncmd, 2);
968 WAIT(INTRFLAGS(base_io), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base_io+2))) &&
((base_io+2)) < 256) ? __inbc((base_io+2)) : __inb((base_io
+2))) & (0x8f); if ((WAITbits & (0x04)) == (0x04) &&
((WAITbits & (0)) == 0)) break; if (--WAITtimeout == 0) goto
fail; } };
969 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
970 aha1542_out(base_io, offcmd, 2);
971 WAIT(INTRFLAGS(base_io), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base_io+2))) &&
((base_io+2)) < 256) ? __inbc((base_io+2)) : __inb((base_io
+2))) & (0x8f); if ((WAITbits & (0x04)) == (0x04) &&
((WAITbits & (0)) == 0)) break; if (--WAITtimeout == 0) goto
fail; } };
972 if (setup_dmaspeed[indx] >= 0)
973 {
974 unchar dmacmd[] = {CMD_DMASPEED0x09, 0};
975 dmacmd[1] = setup_dmaspeed[indx];
976 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
977 aha1542_out(base_io, dmacmd, 2);
978 WAIT(INTRFLAGS(base_io), INTRMASK, HACC, 0){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p(((base_io+2))) &&
((base_io+2)) < 256) ? __inbc((base_io+2)) : __inb((base_io
+2))) & (0x8f); if ((WAITbits & (0x04)) == (0x04) &&
((WAITbits & (0)) == 0)) break; if (--WAITtimeout == 0) goto
fail; } };
979 }
980 while (0) {
981 fail:
982 printk("aha1542_detect: setting bus on/off-time failed\n");
983 }
984 aha1542_intr_reset(base_io)((__builtin_constant_p((base_io)) && (base_io) < 256
) ? __outbc((0x20),(base_io)) : __outb((0x20),(base_io)));
985 }
986 if(aha1542_query(base_io, &trans)) goto unregister;
987
988 if (aha1542_getconfig(base_io, &irq_level, &dma_chan, &scsi_id) == -1) goto unregister;
989
990 printk("Configuring Adaptec (SCSI-ID %d) at IO:%x, IRQ %d", scsi_id, base_io, irq_level);
991 if (dma_chan != 0xFF)
992 printk(", DMA priority %d", dma_chan);
993 printk("\n");
994
995 DEB(aha1542_stat());
996 setup_mailboxes(base_io, shpnt);
997
998 DEB(aha1542_stat());
999
1000 DEB(printk("aha1542_detect: enable interrupt channel %d\n", irq_level));
1001 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
1002 cli()__asm__ __volatile__ ("cli": : :"memory");
1003 if (request_irq(irq_level,aha1542_intr_handle, 0, "aha1542", NULL((void *) 0))) {
1004 printk("Unable to allocate IRQ for adaptec controller.\n");
1005 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
1006 goto unregister;
1007 }
1008
1009 if (dma_chan != 0xFF) {
1010 if (request_dma(dma_chan,"aha1542")) {
1011 printk("Unable to allocate DMA channel for Adaptec.\n");
1012 free_irq(irq_level, NULL((void *) 0));
1013 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
1014 goto unregister;
1015 }
1016
1017 if (dma_chan == 0 || dma_chan >= 5) {
1018 set_dma_mode(dma_chan, DMA_MODE_CASCADE0xC0);
1019 enable_dma(dma_chan);
1020 }
1021 }
1022 aha_host[irq_level - 9] = shpnt;
1023 shpnt->this_id = scsi_id;
1024 shpnt->unique_id = base_io;
1025 shpnt->io_port = base_io;
1026 shpnt->n_io_port = 4; /* Number of bytes of I/O space used */
1027 shpnt->dma_channel = dma_chan;
1028 shpnt->irq = irq_level;
1029 HOSTDATA(shpnt)((struct aha1542_hostdata *) &shpnt->hostdata)->bios_translation = trans;
1030 if(trans == BIOS_TRANSLATION_255632)
1031 printk("aha1542.c: Using extended bios translation\n");
1032 HOSTDATA(shpnt)((struct aha1542_hostdata *) &shpnt->hostdata)->aha1542_last_mbi_used = (2*AHA1542_MAILBOXES8 - 1);
1033 HOSTDATA(shpnt)((struct aha1542_hostdata *) &shpnt->hostdata)->aha1542_last_mbo_used = (AHA1542_MAILBOXES8 - 1);
1034 memset(HOSTDATA(shpnt)->SCint, 0, sizeof(HOSTDATA(shpnt)->SCint))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(((struct
aha1542_hostdata *) &shpnt->hostdata)->SCint))) ? __constant_c_and_count_memset
(((((struct aha1542_hostdata *) &shpnt->hostdata)->
SCint)),((0x01010101UL*(unsigned char)(0))),((sizeof(((struct
aha1542_hostdata *) &shpnt->hostdata)->SCint)))) :
__constant_c_memset(((((struct aha1542_hostdata *) &shpnt
->hostdata)->SCint)),((0x01010101UL*(unsigned char)(0))
),((sizeof(((struct aha1542_hostdata *) &shpnt->hostdata
)->SCint))))) : (__builtin_constant_p((sizeof(((struct aha1542_hostdata
*) &shpnt->hostdata)->SCint))) ? __memset_generic(
(((((struct aha1542_hostdata *) &shpnt->hostdata)->
SCint))),(((0))),(((sizeof(((struct aha1542_hostdata *) &
shpnt->hostdata)->SCint))))) : __memset_generic(((((struct
aha1542_hostdata *) &shpnt->hostdata)->SCint)),((0
)),((sizeof(((struct aha1542_hostdata *) &shpnt->hostdata
)->SCint))))));
1035 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
1036#if 0
1037 DEB(printk(" *** READ CAPACITY ***\n"));
1038
1039 {
1040 unchar buf[8];
1041 static unchar cmd[] = { READ_CAPACITY0x25, 0, 0, 0, 0, 0, 0, 0, 0, 0};
1042 int i;
1043
1044 for (i = 0; i < sizeof(buf); ++i) buf[i] = 0x87;
1045 for (i = 0; i < 2; ++i)
1046 if (!aha1542_command(i, cmd, buf, sizeof(buf))) {
1047 printk("aha_detect: LU %d sector_size %d device_size %d\n",
1048 i, xscsi2int(buf+4)( (((long)(buf+4)[0]) << 24) + (((long)(buf+4)[1]) <<
16) + (((long)(buf+4)[2]) << 8) + ((long)(buf+4)[3]) ), xscsi2int(buf)( (((long)(buf)[0]) << 24) + (((long)(buf)[1]) <<
16) + (((long)(buf)[2]) << 8) + ((long)(buf)[3]) ));
1049 }
1050 }
1051
1052 DEB(printk(" *** NOW RUNNING MY OWN TEST *** \n"));
1053
1054 for (i = 0; i < 4; ++i)
1055 {
1056 unsigned char cmd[10];
1057 static buffer[512];
1058
1059 cmd[0] = READ_100x28;
1060 cmd[1] = 0;
1061 xany2scsi(cmd+2, i)(cmd+2)[0] = ((long)(i)) >> 24; (cmd+2)[1] = ((long)(i)
) >> 16; (cmd+2)[2] = ((long)(i)) >> 8; (cmd+2)[3
] = ((long)(i));;
1062 cmd[6] = 0;
1063 cmd[7] = 0;
1064 cmd[8] = 1;
1065 cmd[9] = 0;
1066 aha1542_command(0, cmd, buffer, 512);
1067 }
1068#endif
1069 request_region(bases[indx], 4,"aha1542"); /* Register the IO ports that we use */
1070 count++;
1071 continue;
1072 unregister:
1073 scsi_unregister(shpnt);
1074 continue;
1075
1076 };
1077
1078 return count;
1079}
1080
1081static int aha1542_restart(struct Scsi_Host * shost)
1082{
1083 int i;
1084 int count = 0;
1085#if 0
1086 unchar ahacmd = CMD_START_SCSI0x02;
1087#endif
1088
1089 for(i=0; i< AHA1542_MAILBOXES8; i++)
1090 if(HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->SCint[i] &&
1091 !(HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->SCint[i]->device->soft_reset))
1092 {
1093#if 0
1094 HOSTDATA(shost)((struct aha1542_hostdata *) &shost->hostdata)->mb[i].status = 1; /* Indicate ready to restart... */
1095#endif
1096 count++;
1097 }
1098
1099 printk("Potential to restart %d stalled commands...\n", count);
1100#if 0
1101 /* start scsi command */
1102 if (count) aha1542_out(shost->io_port, &ahacmd, 1);
1103#endif
1104 return 0;
1105}
1106
1107/* The abort command does not leave the device in a clean state where
1108 it is available to be used again. Until this gets worked out, we will
1109 leave it commented out. */
1110
1111int aha1542_abort(Scsi_Cmnd * SCpnt)
1112{
1113#if 0
1114 unchar ahacmd = CMD_START_SCSI0x02;
1115 unsigned long flags;
1116 struct mailbox * mb;
1117 int mbi, mbo, i;
1118
1119 printk("In aha1542_abort: %x %x\n",
1120 inb(STATUS(SCpnt->host->io_port))((__builtin_constant_p((SCpnt->host->io_port)) &&
(SCpnt->host->io_port) < 256) ? __inbc(SCpnt->host
->io_port) : __inb(SCpnt->host->io_port)),
1121 inb(INTRFLAGS(SCpnt->host->io_port))((__builtin_constant_p(((SCpnt->host->io_port+2))) &&
((SCpnt->host->io_port+2)) < 256) ? __inbc((SCpnt->
host->io_port+2)) : __inb((SCpnt->host->io_port+2))));
1122
1123 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
1124 cli()__asm__ __volatile__ ("cli": : :"memory");
1125 mb = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->mb;
1126 mbi = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->aha1542_last_mbi_used + 1;
1127 if (mbi >= 2*AHA1542_MAILBOXES8) mbi = AHA1542_MAILBOXES8;
1128
1129 do{
1130 if(mb[mbi].status != 0) break;
1131 mbi++;
1132 if (mbi >= 2*AHA1542_MAILBOXES8) mbi = AHA1542_MAILBOXES8;
1133 } while (mbi != HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->aha1542_last_mbi_used);
1134 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
1135
1136 if(mb[mbi].status) {
1137 printk("Lost interrupt discovered on irq %d - attempting to recover\n",
1138 SCpnt->host->irq);
1139 aha1542_intr_handle(SCpnt->host->irq, NULL((void *) 0));
1140 return 0;
1141 }
1142
1143 /* OK, no lost interrupt. Try looking to see how many pending commands
1144 we think we have. */
1145
1146 for(i=0; i< AHA1542_MAILBOXES8; i++)
1147 if(HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i])
1148 {
1149 if(HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] == SCpnt) {
1150 printk("Timed out command pending for %s\n",
1151 kdevname(SCpnt->request.rq_dev));
1152 if (HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->mb[i].status) {
1153 printk("OGMB still full - restarting\n");
1154 aha1542_out(SCpnt->host->io_port, &ahacmd, 1);
1155 };
1156 } else
1157 printk("Other pending command %s\n",
1158 kdevname(SCpnt->request.rq_dev));
1159 }
1160
1161#endif
1162
1163 DEB(printk("aha1542_abort\n"));
1164#if 0
1165 save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory"
);
1166 cli()__asm__ __volatile__ ("cli": : :"memory");
1167 for(mbo = 0; mbo < AHA1542_MAILBOXES8; mbo++)
1168 if (SCpnt == HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[mbo]){
1169 mb[mbo].status = 2; /* Abort command */
1170 aha1542_out(SCpnt->host->io_port, &ahacmd, 1); /* start scsi command */
1171 restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory");
1172 break;
1173 };
1174#endif
1175 return SCSI_ABORT_SNOOZE0;
1176}
1177
1178/* We do not implement a reset function here, but the upper level code
1179 assumes that it will get some kind of response for the command in
1180 SCpnt. We must oblige, or the command will hang the scsi system.
1181 For a first go, we assume that the 1542 notifies us with all of the
1182 pending commands (it does implement soft reset, after all). */
1183
1184int aha1542_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags)
1185{
1186 unchar ahacmd = CMD_START_SCSI0x02;
1187 int i;
1188
1189 /*
1190 * See if a bus reset was suggested.
1191 */
1192 if( reset_flags & SCSI_RESET_SUGGEST_BUS_RESET0x04 )
1193 {
1194 /*
1195 * This does a scsi reset for all devices on the bus.
1196 * In principle, we could also reset the 1542 - should
1197 * we do this? Try this first, and we can add that later
1198 * if it turns out to be useful.
1199 */
1200 outb(HRST | SCRST, CONTROL(SCpnt->host->io_port))((__builtin_constant_p((SCpnt->host->io_port)) &&
(SCpnt->host->io_port) < 256) ? __outbc((0x80 | 0x10
),(SCpnt->host->io_port)) : __outb((0x80 | 0x10),(SCpnt
->host->io_port)));
1201
1202 /*
1203 * Wait for the thing to settle down a bit. Unfortunately
1204 * this is going to basically lock up the machine while we
1205 * wait for this to complete. To be 100% correct, we need to
1206 * check for timeout, and if we are doing something like this
1207 * we are pretty desperate anyways.
1208 */
1209 WAIT(STATUS(SCpnt->host->io_port),{ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((SCpnt->host->
io_port)) && (SCpnt->host->io_port) < 256) ?
__inbc(SCpnt->host->io_port) : __inb(SCpnt->host->
io_port)) & (0xfd); if ((WAITbits & (0x20|0x10)) == (
0x20|0x10) && ((WAITbits & (0x80|0x40|0x01|0x04|0x08
)) == 0)) break; if (--WAITtimeout == 0) goto fail; } }
1210 STATMASK, INIT|IDLE, STST|DIAGF|INVDCMD|DF|CDF){ register int WAITbits; register int WAITtimeout = 3000000; while
(1) { WAITbits = ((__builtin_constant_p((SCpnt->host->
io_port)) && (SCpnt->host->io_port) < 256) ?
__inbc(SCpnt->host->io_port) : __inb(SCpnt->host->
io_port)) & (0xfd); if ((WAITbits & (0x20|0x10)) == (
0x20|0x10) && ((WAITbits & (0x80|0x40|0x01|0x04|0x08
)) == 0)) break; if (--WAITtimeout == 0) goto fail; } };
1211
1212 /*
1213 * We need to do this too before the 1542 can interact with
1214 * us again.
1215 */
1216 setup_mailboxes(SCpnt->host->io_port, SCpnt->host);
1217
1218 /*
1219 * Now try to pick up the pieces. Restart all commands
1220 * that are currently active on the bus, and reset all of
1221 * the datastructures. We have some time to kill while
1222 * things settle down, so print a nice message.
1223 */
1224 printk("Sent BUS RESET to scsi host %d\n", SCpnt->host->host_no);
1225
1226 for(i=0; i< AHA1542_MAILBOXES8; i++)
1227 if(HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] != NULL((void *) 0))
1228 {
1229 Scsi_Cmnd * SCtmp;
1230 SCtmp = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i];
1231 SCtmp->result = DID_RESET0x08 << 16;
1232 if (SCtmp->host_scribble) scsi_free(SCtmp->host_scribble, 512);
1233 printk("Sending DID_RESET for target %d\n", SCpnt->target);
1234 SCtmp->scsi_done(SCpnt);
1235
1236 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] = NULL((void *) 0);
1237 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->mb[i].status = 0;
1238 }
1239 /*
1240 * Now tell the mid-level code what we did here. Since
1241 * we have restarted all of the outstanding commands,
1242 * then report SUCCESS.
1243 */
1244 return (SCSI_RESET_SUCCESS2 | SCSI_RESET_BUS_RESET0x100);
1245fail:
1246 printk("aha1542.c: Unable to perform hard reset.\n");
1247 printk("Power cycle machine to reset\n");
1248 return (SCSI_RESET_ERROR6 | SCSI_RESET_BUS_RESET0x100);
1249
1250
1251 }
1252 else
1253 {
1254 /* This does a selective reset of just the one device */
1255 /* First locate the ccb for this command */
1256 for(i=0; i< AHA1542_MAILBOXES8; i++)
1257 if(HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] == SCpnt)
1258 {
1259 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->ccb[i].op = 0x81; /* BUS DEVICE RESET */
1260 /* Now tell the 1542 to flush all pending commands for this target */
1261 aha1542_out(SCpnt->host->io_port, &ahacmd, 1);
1262
1263 /* Here is the tricky part. What to do next. Do we get an interrupt
1264 for the commands that we aborted with the specified target, or
1265 do we generate this on our own? Try it without first and see
1266 what happens */
1267 printk("Sent BUS DEVICE RESET to target %d\n", SCpnt->target);
1268
1269 /* If the first does not work, then try the second. I think the
1270 first option is more likely to be correct. Free the command
1271 block for all commands running on this target... */
1272 for(i=0; i< AHA1542_MAILBOXES8; i++)
1273 if(HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] &&
1274 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i]->target == SCpnt->target)
1275 {
1276 Scsi_Cmnd * SCtmp;
1277 SCtmp = HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i];
1278 SCtmp->result = DID_RESET0x08 << 16;
1279 if (SCtmp->host_scribble) scsi_free(SCtmp->host_scribble, 512);
1280 printk("Sending DID_RESET for target %d\n", SCpnt->target);
1281 SCtmp->scsi_done(SCpnt);
1282
1283 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->SCint[i] = NULL((void *) 0);
1284 HOSTDATA(SCpnt->host)((struct aha1542_hostdata *) &SCpnt->host->hostdata
)->mb[i].status = 0;
1285 }
1286 return SCSI_RESET_SUCCESS2;
1287 }
1288 }
1289 /* No active command at this time, so this means that each time we got
1290 some kind of response the last time through. Tell the mid-level code
1291 to request sense information in order to decide what to do next. */
1292 return SCSI_RESET_PUNT1;
1293}
1294
1295#include "sd.h"
1296
1297int aha1542_biosparam(Scsi_Disk * disk, kdev_t dev, int * ip)
1298{
1299 int translation_algorithm;
1300 int size = disk->capacity;
1301
1302 translation_algorithm = HOSTDATA(disk->device->host)((struct aha1542_hostdata *) &disk->device->host->
hostdata)->bios_translation;
1303
1304 if((size>>11) > 1024 && translation_algorithm == BIOS_TRANSLATION_255632) {
1305 /* Please verify that this is the same as what DOS returns */
1306 ip[0] = 255;
1307 ip[1] = 63;
1308 ip[2] = size /255/63;
1309 } else {
1310 ip[0] = 64;
1311 ip[1] = 32;
1312 ip[2] = size >> 11;
1313 }
1314
1315 return 0;
1316}
1317
1318
1319#ifdef MODULE
1320/* Eventually this will go into an include file, but this will be later */
1321Scsi_Host_Template driver_template = AHA1542{ ((void *) 0), ((void *) 0), &proc_scsi_aha1542, ((void *
) 0), "Adaptec 1542", aha1542_detect, ((void *) 0), ((void *)
0), aha1542_command, aha1542_queuecommand, aha1542_abort, aha1542_reset
, ((void *) 0), aha1542_biosparam, 8, 7, 16, 1, 0, 1, 1};
1322
1323#include "scsi_module.c"
1324#endif
1325