File: | obj-scan-build/../linux/src/drivers/scsi/advansys.c |
Location: | line 5517, column 5 |
Description: | Value stored to 'do_scsi_done' is never read |
1 | /* $Id: advansys.c,v 1.1.4.1 2005/06/02 18:52:38 ams Exp $ */ |
2 | #define ASC_VERSION"3.1E" "3.1E" /* AdvanSys Driver Version */ |
3 | |
4 | /* |
5 | * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters |
6 | * |
7 | * Copyright (c) 1995-1998 Advanced System Products, Inc. |
8 | * All Rights Reserved. |
9 | * |
10 | * Redistribution and use in source and binary forms, with or without |
11 | * modification, are permitted provided that redistributions of source |
12 | * code retain the above copyright notice and this comment without |
13 | * modification. |
14 | * |
15 | * There is an AdvanSys Linux WWW page at: |
16 | * http://www.advansys.com/linux.html |
17 | * |
18 | * The latest version of the AdvanSys driver is available at: |
19 | * ftp://ftp.advansys.com/pub/linux/linux.tgz |
20 | * |
21 | * Please send questions, comments, bug reports to: |
22 | * bobf@advansys.com (Bob Frey) |
23 | */ |
24 | |
25 | /* |
26 | |
27 | Documentation for the AdvanSys Driver |
28 | |
29 | A. Linux Kernel Testing |
30 | B. Adapters Supported by this Driver |
31 | C. Linux v1.2.X - Directions for Adding the AdvanSys Driver |
32 | D. Linux v1.3.1 - v1.3.57 - Directions for Adding the AdvanSys Driver |
33 | E. Linux v1.3.58 and Newer - Upgrading the AdvanSys Driver |
34 | F. Source Comments |
35 | G. Driver Compile Time Options and Debugging |
36 | H. Driver LILO Option |
37 | I. Release History |
38 | J. Known Problems or Issues |
39 | K. Credits |
40 | L. AdvanSys Contact Information |
41 | |
42 | A. Linux Kernel Testing |
43 | |
44 | This driver has been tested in the following Linux kernels: v1.2.13, |
45 | v1.3.57, v2.0.33, v2.1.77. These kernel versions are major releases |
46 | of Linux or the latest Linux kernel versions available when this version |
47 | of the driver was released. The driver should also work in earlier |
48 | versions of the Linux kernel. Beginning with v1.3.58 the AdvanSys driver |
49 | is included with all Linux kernels. Please refer to sections C, D, and |
50 | E for instructions on adding or upgrading the AdvanSys driver. |
51 | |
52 | B. Adapters Supported by this Driver |
53 | |
54 | AdvanSys (Advanced System Products, Inc.) manufactures the following |
55 | RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow |
56 | (8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI |
57 | buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit |
58 | transfer) SCSI Host Adapters for the PCI bus. |
59 | |
60 | The CDB counts below indicate the number of SCSI CDB (Command |
61 | Descriptor Block) requests that can be stored in the RISC chip |
62 | cache and board LRAM. A CDB is a single SCSI command. The driver |
63 | detect routine will display the number of CDBs available for each |
64 | adapter detected. The number of CDBs used by the driver can be |
65 | lowered in the BIOS by changing the 'Host Queue Size' adapter setting. |
66 | |
67 | Connectivity Products: |
68 | ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1) |
69 | ABP5140 - Bus-Master ISA PnP (16 CDB) (Footnote 1, 3) |
70 | ABP5142 - Bus-Master ISA PnP with floppy (16 CDB) (Footnote 4) |
71 | ABP920 - Bus-Master PCI (16 CDB) |
72 | ABP930 - Bus-Master PCI (16 CDB) (Footnote 5) |
73 | ABP930U - Bus-Master PCI Ultra (16 CDB) |
74 | ABP930UA - Bus-Master PCI Ultra (16 CDB) |
75 | ABP960 - Bus-Master PCI MAC/PC (16 CDB) (Footnote 2) |
76 | ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB) (Footnote 2) |
77 | |
78 | Single Channel Products: |
79 | ABP542 - Bus-Master ISA with floppy (240 CDB) |
80 | ABP742 - Bus-Master EISA (240 CDB) |
81 | ABP842 - Bus-Master VL (240 CDB) |
82 | ABP940 - Bus-Master PCI (240 CDB) |
83 | ABP940U - Bus-Master PCI Ultra (240 CDB) |
84 | ABP970 - Bus-Master PCI MAC/PC (240 CDB) |
85 | ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB) |
86 | ABP940UW - Bus-Master PCI Ultra-Wide (240 CDB) |
87 | |
88 | Multi Channel Products: |
89 | ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel) |
90 | ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel) |
91 | ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel) |
92 | ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel) |
93 | ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel) |
94 | |
95 | Footnotes: |
96 | 1. This board has been shipped by HP with the 4020i CD-R drive. |
97 | The board has no BIOS so it cannot control a boot device, but |
98 | it can control any secondary SCSI device. |
99 | 2. This board has been sold by Iomega as a Jaz Jet PCI adapter. |
100 | 3. This board has been sold by SIIG as the i540 SpeedMaster. |
101 | 4. This board has been sold by SIIG as the i542 SpeedMaster. |
102 | 5. This board has been sold by SIIG as the Fast SCSI Pro PCI. |
103 | |
104 | C. Linux v1.2.X - Directions for Adding the AdvanSys Driver |
105 | |
106 | These directions apply to v1.2.13. For versions that follow v1.2.13. |
107 | but precede v1.3.57 some of the changes for Linux v1.3.X listed |
108 | below may need to be modified or included. A patch is available |
109 | for v1.2.13 from the AdvanSys WWW and FTP sites. |
110 | |
111 | There are two source files: advansys.h and advansys.c. Copy |
112 | both of these files to the directory /usr/src/linux/drivers/scsi. |
113 | |
114 | 1. Add the following line to /usr/src/linux/arch/i386/config.in |
115 | after "comment 'SCSI low-level drivers'": |
116 | |
117 | bool 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS y |
118 | |
119 | 2. Add the following lines to /usr/src/linux/drivers/scsi/hosts.c |
120 | after "#include "hosts.h"": |
121 | |
122 | #ifdef CONFIG_SCSI_ADVANSYS |
123 | #include "advansys.h" |
124 | #endif |
125 | |
126 | and after "static Scsi_Host_Template builtin_scsi_hosts[] =": |
127 | |
128 | #ifdef CONFIG_SCSI_ADVANSYS |
129 | ADVANSYS, |
130 | #endif |
131 | |
132 | 3. Add the following lines to /usr/src/linux/drivers/scsi/Makefile: |
133 | |
134 | ifdef CONFIG_SCSI_ADVANSYS |
135 | SCSI_SRCS := $(SCSI_SRCS) advansys.c |
136 | SCSI_OBJS := $(SCSI_OBJS) advansys.o |
137 | else |
138 | SCSI_MODULE_OBJS := $(SCSI_MODULE_OBJS) advansys.o |
139 | endif |
140 | |
141 | 4. (Optional) If you would like to enable the LILO command line |
142 | and /etc/lilo.conf 'advansys' option, make the following changes. |
143 | This option can be used to disable I/O port scanning or to limit |
144 | I/O port scanning to specific addresses. Refer to the 'Driver |
145 | LILO Option' section below. Add the following lines to |
146 | /usr/src/linux/init/main.c in the prototype section: |
147 | |
148 | extern void advansys_setup(char *str, int *ints); |
149 | |
150 | and add the following lines to the bootsetups[] array. |
151 | |
152 | #ifdef CONFIG_SCSI_ADVANSYS |
153 | { "advansys=", advansys_setup }, |
154 | #endif |
155 | |
156 | 5. If you have the HP 4020i CD-R driver and Linux v1.2.X you should |
157 | add a fix to the CD-ROM target driver. This fix will allow |
158 | you to mount CDs with the iso9660 file system. Linux v1.3.X |
159 | already has this fix. In the file /usr/src/linux/drivers/scsi/sr.c |
160 | and function get_sectorsize() after the line: |
161 | |
162 | if(scsi_CDs[i].sector_size == 0) scsi_CDs[i].sector_size = 2048; |
163 | |
164 | add the following line: |
165 | |
166 | if(scsi_CDs[i].sector_size == 2340) scsi_CDs[i].sector_size = 2048; |
167 | |
168 | 6. In the directory /usr/src/linux run 'make config' to configure |
169 | the AdvanSys driver, then run 'make vmlinux' or 'make zlilo' to |
170 | make the kernel. If the AdvanSys driver is not configured, then |
171 | a loadable module can be built by running 'make modules' and |
172 | 'make modules_install'. Use 'insmod' and 'rmmod' to install |
173 | and remove advansys.o. |
174 | |
175 | D. Linux v1.3.1 - v1.3.57 - Directions for Adding the AdvanSys Driver |
176 | |
177 | These directions apply to v1.3.57. For versions that precede v1.3.57 |
178 | some of these changes may need to be modified or eliminated. A patch |
179 | is available for v1.3.57 from the AdvanSys WWW and FTP sites. |
180 | Beginning with v1.3.58 this driver is included with the Linux |
181 | distribution eliminating the need for making any changes. |
182 | |
183 | There are two source files: advansys.h and advansys.c. Copy |
184 | both of these files to the directory /usr/src/linux/drivers/scsi. |
185 | |
186 | 1. Add the following line to /usr/src/linux/drivers/scsi/Config.in |
187 | after "comment 'SCSI low-level drivers'": |
188 | |
189 | dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI |
190 | |
191 | 2. Add the following lines to /usr/src/linux/drivers/scsi/hosts.c |
192 | after "#include "hosts.h"": |
193 | |
194 | #ifdef CONFIG_SCSI_ADVANSYS |
195 | #include "advansys.h" |
196 | #endif |
197 | |
198 | and after "static Scsi_Host_Template builtin_scsi_hosts[] =": |
199 | |
200 | #ifdef CONFIG_SCSI_ADVANSYS |
201 | ADVANSYS, |
202 | #endif |
203 | |
204 | 3. Add the following lines to /usr/src/linux/drivers/scsi/Makefile: |
205 | |
206 | ifeq ($(CONFIG_SCSI_ADVANSYS),y) |
207 | L_OBJS += advansys.o |
208 | else |
209 | ifeq ($(CONFIG_SCSI_ADVANSYS),m) |
210 | M_OBJS += advansys.o |
211 | endif |
212 | endif |
213 | |
214 | 4. Add the following line to /usr/src/linux/include/linux/proc_fs.h |
215 | in the enum scsi_directory_inos array: |
216 | |
217 | PROC_SCSI_ADVANSYS, |
218 | |
219 | 5. (Optional) If you would like to enable the LILO command line |
220 | and /etc/lilo.conf 'advansys' option, make the following changes. |
221 | This option can be used to disable I/O port scanning or to limit |
222 | I/O port scanning to specific addresses. Refer to the 'Driver |
223 | LILO Option' section below. Add the following lines to |
224 | /usr/src/linux/init/main.c in the prototype section: |
225 | |
226 | extern void advansys_setup(char *str, int *ints); |
227 | |
228 | and add the following lines to the bootsetups[] array. |
229 | |
230 | #ifdef CONFIG_SCSI_ADVANSYS |
231 | { "advansys=", advansys_setup }, |
232 | #endif |
233 | |
234 | 6. In the directory /usr/src/linux run 'make config' to configure |
235 | the AdvanSys driver, then run 'make vmlinux' or 'make zlilo' to |
236 | make the kernel. If the AdvanSys driver is not configured, then |
237 | a loadable module can be built by running 'make modules' and |
238 | 'make modules_install'. Use 'insmod' and 'rmmod' to install |
239 | and remove advansys.o. |
240 | |
241 | E. Linux v1.3.58 and Newer - Upgrading the AdvanSys Driver |
242 | |
243 | To upgrade the AdvanSys driver in a Linux v1.3.58 and newer |
244 | kernel, first check the version of the current driver. The |
245 | version is defined by the manifest constant ASC_VERSION at |
246 | the beginning of advansys.c. The new driver should have a |
247 | ASC_VERSION value greater than the current version. To install |
248 | the new driver rename advansys.c and advansys.h in the Linux |
249 | kernel source tree drivers/scsi directory to different names |
250 | or save them to a different directory in case you want to revert |
251 | to the old version of the driver. After the old driver is saved |
252 | copy the new advansys.c and advansys.h to drivers/scsi, rebuild |
253 | the kernel, and install the new kernel. No other changes are needed. |
254 | |
255 | F. Source Comments |
256 | |
257 | 1. Use tab stops set to 4 for the source files. For vi use 'se tabstops=4'. |
258 | |
259 | 2. This driver should be maintained in multiple files. But to make |
260 | it easier to include with Linux and to follow Linux conventions, |
261 | the whole driver is maintained in the source files advansys.h and |
262 | advansys.c. In this file logical sections of the driver begin with |
263 | a comment that contains '---'. The following are the logical sections |
264 | of the driver below. |
265 | |
266 | --- Linux Version |
267 | --- Linux Include Files |
268 | --- Driver Options |
269 | --- Debugging Header |
270 | --- Asc Library Constants and Macros |
271 | --- Adv Library Constants and Macros |
272 | --- Driver Constants and Macros |
273 | --- Driver Structures |
274 | --- Driver Data |
275 | --- Driver Function Prototypes |
276 | --- Linux 'Scsi_Host_Template' and advansys_setup() Functions |
277 | --- Loadable Driver Support |
278 | --- Miscellaneous Driver Functions |
279 | --- Functions Required by the Asc Library |
280 | --- Functions Required by the Adv Library |
281 | --- Tracing and Debugging Functions |
282 | --- Asc Library Functions |
283 | --- Adv Library Functions |
284 | |
285 | 3. The string 'XXX' is used to flag code that needs to be re-written |
286 | or that contains a problem that needs to be addressed. |
287 | |
288 | 4. I have stripped comments from and reformatted the source for the |
289 | Asc Library and Adv Library to reduce the size of this file. This |
290 | source can be found under the following headings. The Asc Library |
291 | is used to support Narrow Boards. The Adv Library is used to |
292 | support Wide Boards. |
293 | |
294 | --- Asc Library Constants and Macros |
295 | --- Adv Library Constants and Macros |
296 | --- Asc Library Functions |
297 | --- Adv Library Functions |
298 | |
299 | G. Driver Compile Time Options and Debugging |
300 | |
301 | In this source file the following constants can be defined. They are |
302 | defined in the source below. Both of these options are enabled by |
303 | default. |
304 | |
305 | 1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled) |
306 | |
307 | Enabling this option adds assertion logic statements to the |
308 | driver. If an assertion fails a message will be displayed to |
309 | the console, but the system will continue to operate. Any |
310 | assertions encountered should be reported to the person |
311 | responsible for the driver. Assertion statements may proactively |
312 | detect problems with the driver and facilitate fixing these |
313 | problems. Enabling assertions will add a small overhead to the |
314 | execution of the driver. |
315 | |
316 | 2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled) |
317 | |
318 | Enabling this option adds tracing functions to the driver and |
319 | the ability to set a driver tracing level at boot time. This |
320 | option will also export symbols not required outside the driver to |
321 | the kernel name space. This option is very useful for debugging |
322 | the driver, but it will add to the size of the driver execution |
323 | image and add overhead to the execution of the driver. |
324 | |
325 | The amount of debugging output can be controlled with the global |
326 | variable 'asc_dbglvl'. The higher the number the more output. By |
327 | default the debug level is 0. |
328 | |
329 | If the driver is loaded at boot time and the LILO Driver Option |
330 | is included in the system, the debug level can be changed by |
331 | specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The |
332 | first three hex digits of the pseudo I/O Port must be set to |
333 | 'deb' and the fourth hex digit specifies the debug level: 0 - F. |
334 | The following command line will look for an adapter at 0x330 |
335 | and set the debug level to 2. |
336 | |
337 | linux advansys=0x330,0,0,0,0xdeb2 |
338 | |
339 | If the driver is built as a loadable module this variable can be |
340 | defined when the driver is loaded. The following insmod command |
341 | will set the debug level to one. |
342 | |
343 | insmod advansys.o asc_dbglvl=1 |
344 | |
345 | Debugging Message Levels: |
346 | 0: Errors Only |
347 | 1: High-Level Tracing |
348 | 2-N: Verbose Tracing |
349 | |
350 | I don't know the approved way for turning on printk()s to the |
351 | console. Here's a program I use to do this. Debug output is |
352 | logged in /var/adm/messages. |
353 | |
354 | main() |
355 | { |
356 | syscall(103, 7, 0, 0); |
357 | } |
358 | |
359 | I found that increasing LOG_BUF_LEN to 40960 in kernel/printk.c |
360 | prevents most level 1 debug messages from being lost. |
361 | |
362 | 3. ADVANSYS_STATS - Enable statistics (Def: Enabled >= v1.3.0) |
363 | |
364 | Enabling this option adds statistics collection and display |
365 | through /proc to the driver. The information is useful for |
366 | monitoring driver and device performance. It will add to the |
367 | size of the driver execution image and add minor overhead to |
368 | the execution of the driver. |
369 | |
370 | Statistics are maintained on a per adapter basis. Driver entry |
371 | point call counts and transfer size counts are maintained. |
372 | Statistics are only available for kernels greater than or equal |
373 | to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured. |
374 | |
375 | AdvanSys SCSI adapter files have the following path name format: |
376 | |
377 | /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)] |
378 | |
379 | This information can be displayed with cat. For example: |
380 | |
381 | cat /proc/scsi/advansys/0 |
382 | |
383 | When ADVANSYS_STATS is not defined the AdvanSys /proc files only |
384 | contain adapter and device configuration information. |
385 | |
386 | H. Driver LILO Option |
387 | |
388 | If init/main.c is modified as described in the 'Directions for Adding |
389 | the AdvanSys Driver to Linux' section (B.4.) above, the driver will |
390 | recognize the 'advansys' LILO command line and /etc/lilo.conf option. |
391 | This option can be used to either disable I/O port scanning or to limit |
392 | scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and |
393 | PCI boards will still be searched for and detected. This option only |
394 | affects searching for ISA and VL boards. |
395 | |
396 | Examples: |
397 | 1. Eliminate I/O port scanning: |
398 | boot: linux advansys= |
399 | or |
400 | boot: linux advansys=0x0 |
401 | 2. Limit I/O port scanning to one I/O port: |
402 | boot: linux advansys=0x110 |
403 | 3. Limit I/O port scanning to four I/O ports: |
404 | boot: linux advansys=0x110,0x210,0x230,0x330 |
405 | |
406 | For a loadable module the same effect can be achieved by setting |
407 | the 'asc_iopflag' variable and 'asc_ioport' array when loading |
408 | the driver, e.g. |
409 | |
410 | insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330 |
411 | |
412 | If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1) |
413 | I/O Port may be added to specify the driver debug level. Refer to |
414 | the 'Driver Compile Time Options and Debugging' section above for |
415 | more information. |
416 | |
417 | I. Release History |
418 | |
419 | BETA-1.0 (12/23/95): |
420 | First Release |
421 | |
422 | BETA-1.1 (12/28/95): |
423 | 1. Prevent advansys_detect() from being called twice. |
424 | 2. Add LILO 0xdeb[0-f] option to set 'asc_dbglvl'. |
425 | |
426 | 1.2 (1/12/96): |
427 | 1. Prevent re-entrancy in the interrupt handler which |
428 | resulted in the driver hanging Linux. |
429 | 2. Fix problem that prevented ABP-940 cards from being |
430 | recognized on some PCI motherboards. |
431 | 3. Add support for the ABP-5140 PnP ISA card. |
432 | 4. Fix check condition return status. |
433 | 5. Add conditionally compiled code for Linux v1.3.X. |
434 | |
435 | 1.3 (2/23/96): |
436 | 1. Fix problem in advansys_biosparam() that resulted in the |
437 | wrong drive geometry being returned for drives > 1GB with |
438 | extended translation enabled. |
439 | 2. Add additional tracing during device initialization. |
440 | 3. Change code that only applies to ISA PnP adapter. |
441 | 4. Eliminate 'make dep' warning. |
442 | 5. Try to fix problem with handling resets by increasing their |
443 | timeout value. |
444 | |
445 | 1.4 (5/8/96): |
446 | 1. Change definitions to eliminate conflicts with other subsystems. |
447 | 2. Add versioning code for the shared interrupt changes. |
448 | 3. Eliminate problem in asc_rmqueue() with iterating after removing |
449 | a request. |
450 | 4. Remove reset request loop problem from the "Known Problems or |
451 | Issues" section. This problem was isolated and fixed in the |
452 | mid-level SCSI driver. |
453 | |
454 | 1.5 (8/8/96): |
455 | 1. Add support for ABP-940U (PCI Ultra) adapter. |
456 | 2. Add support for IRQ sharing by setting the SA_SHIRQ flag for |
457 | request_irq and supplying a dev_id pointer to both request_irq() |
458 | and free_irq(). |
459 | 3. In AscSearchIOPortAddr11() restore a call to check_region() which |
460 | should be used before I/O port probing. |
461 | 4. Fix bug in asc_prt_hex() which resulted in the displaying |
462 | the wrong data. |
463 | 5. Incorporate miscellaneous Asc Library bug fixes and new microcode. |
464 | 6. Change driver versioning to be specific to each Linux sub-level. |
465 | 7. Change statistics gathering to be per adapter instead of global |
466 | to the driver. |
467 | 8. Add more information and statistics to the adapter /proc file: |
468 | /proc/scsi/advansys[0...]. |
469 | 9. Remove 'cmd_per_lun' from the "Known Problems or Issues" list. |
470 | This problem has been addressed with the SCSI mid-level changes |
471 | made in v1.3.89. The advansys_select_queue_depths() function |
472 | was added for the v1.3.89 changes. |
473 | |
474 | 1.6 (9/10/96): |
475 | 1. Incorporate miscellaneous Asc Library bug fixes and new microcode. |
476 | |
477 | 1.7 (9/25/96): |
478 | 1. Enable clustering and optimize the setting of the maximum number |
479 | of scatter gather elements for any particular board. Clustering |
480 | increases CPU utilization, but results in a relatively larger |
481 | increase in I/O throughput. |
482 | 2. Improve the performance of the request queuing functions by |
483 | adding a last pointer to the queue structure. |
484 | 3. Correct problems with reset and abort request handling that |
485 | could have hung or crashed Linux. |
486 | 4. Add more information to the adapter /proc file: |
487 | /proc/scsi/advansys[0...]. |
488 | 5. Remove the request timeout issue form the driver issues list. |
489 | 6. Miscellaneous documentation additions and changes. |
490 | |
491 | 1.8 (10/4/96): |
492 | 1. Make changes to handle the new v2.1.0 kernel memory mapping |
493 | in which a kernel virtual address may not be equivalent to its |
494 | bus or DMA memory address. |
495 | 2. Change abort and reset request handling to make it yet even |
496 | more robust. |
497 | 3. Try to mitigate request starvation by sending ordered requests |
498 | to heavily loaded, tag queuing enabled devices. |
499 | 4. Maintain statistics on request response time. |
500 | 5. Add request response time statistics and other information to |
501 | the adapter /proc file: /proc/scsi/advansys[0...]. |
502 | |
503 | 1.9 (10/21/96): |
504 | 1. Add conditionally compiled code (ASC_QUEUE_FLOW_CONTROL) to |
505 | make use of mid-level SCSI driver device queue depth flow |
506 | control mechanism. This will eliminate aborts caused by a |
507 | device being unable to keep up with requests and eliminate |
508 | repeat busy or QUEUE FULL status returned by a device. |
509 | 2. Incorporate miscellaneous Asc Library bug fixes. |
510 | 3. To allow the driver to work in kernels with broken module |
511 | support set 'cmd_per_lun' if the driver is compiled as a |
512 | module. This change affects kernels v1.3.89 to present. |
513 | 4. Remove PCI BIOS address from the driver banner. The PCI BIOS |
514 | is relocated by the motherboard BIOS and its new address can |
515 | not be determined by the driver. |
516 | 5. Add mid-level SCSI queue depth information to the adapter |
517 | /proc file: /proc/scsi/advansys[0...]. |
518 | |
519 | 2.0 (11/14/96): |
520 | 1. Change allocation of global structures used for device |
521 | initialization to guarantee they are in DMA-able memory. |
522 | Previously when the driver was loaded as a module these |
523 | structures might not have been in DMA-able memory, causing |
524 | device initialization to fail. |
525 | |
526 | 2.1 (12/30/96): |
527 | 1. In advansys_reset(), if the request is a synchronous reset |
528 | request, even if the request serial number has changed, then |
529 | complete the request. |
530 | 2. Add Asc Library bug fixes including new microcode. |
531 | 3. Clear inquiry buffer before using it. |
532 | 4. Correct ifdef typo. |
533 | |
534 | 2.2 (1/15/97): |
535 | 1. Add Asc Library bug fixes including new microcode. |
536 | 2. Add synchronous data transfer rate information to the |
537 | adapter /proc file: /proc/scsi/advansys[0...]. |
538 | 3. Change ADVANSYS_DEBUG to be disabled by default. This |
539 | will reduce the size of the driver image, eliminate execution |
540 | overhead, and remove unneeded symbols from the kernel symbol |
541 | space that were previously added by the driver. |
542 | 4. Add new compile-time option ADVANSYS_ASSERT for assertion |
543 | code that used to be defined within ADVANSYS_DEBUG. This |
544 | option is enabled by default. |
545 | |
546 | 2.8 (5/26/97): |
547 | 1. Change version number to 2.8 to synchronize the Linux driver |
548 | version numbering with other AdvanSys drivers. |
549 | 2. Reformat source files without tabs to present the same view |
550 | of the file to everyone regardless of the editor tab setting |
551 | being used. |
552 | 3. Add Asc Library bug fixes. |
553 | |
554 | 3.1A (1/8/98): |
555 | 1. Change version number to 3.1 to indicate that support for |
556 | Ultra-Wide adapters (ABP-940UW) is included in this release. |
557 | 2. Add Asc Library (Narrow Board) bug fixes. |
558 | 3. Report an underrun condition with the host status byte set |
559 | to DID_UNDERRUN. Currently DID_UNDERRUN is defined to 0 which |
560 | causes the underrun condition to be ignored. When Linux defines |
561 | its own DID_UNDERRUN the constant defined in this file can be |
562 | removed. |
563 | 4. Add patch to AscWaitTixISRDone(). |
564 | 5. Add support for up to 16 different AdvanSys host adapter SCSI |
565 | channels in one system. This allows four cards with four channels |
566 | to be used in one system. |
567 | |
568 | 3.1B (1/9/98): |
569 | 1. Handle that PCI register base addresses are not always page |
570 | aligned even though ioremap() requires that the address argument |
571 | be page aligned. |
572 | |
573 | 3.1C (1/10/98): |
574 | 1. Update latest BIOS version checked for from the /proc file. |
575 | 2. Don't set microcode SDTR variable at initialization. Instead |
576 | wait until device capabilities have been detected from an Inquiry |
577 | command. |
578 | |
579 | 3.1D (1/21/98): |
580 | 1. Improve performance when the driver is compiled as module by |
581 | allowing up to 64 scatter-gather elements instead of 8. |
582 | |
583 | 3.1E (5/1/98): |
584 | 1. Set time delay in AscWaitTixISRDone() to 1000 ms. |
585 | 2. Include SMP locking changes. |
586 | 3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS |
587 | access functions. |
588 | 4. Update board serial number printing. |
589 | 5. Try allocating an IRQ both with and without the SA_INTERRUPT |
590 | flag set to allow IRQ sharing with drivers that do not set |
591 | the SA_INTERRUPT flag. Also display a more descriptive error |
592 | message if request_irq() fails. |
593 | 5. Update to latest Asc and Adv Libraries. |
594 | |
595 | J. Known Problems or Issues |
596 | |
597 | 1. Remove conditional constants (ASC_QUEUE_FLOW_CONTROL) around |
598 | the queue depth flow control code when mid-level SCSI changes |
599 | are included in Linux. |
600 | |
601 | K. Credits |
602 | |
603 | Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and |
604 | basis for the Linux v1.3.X changes which were included in the |
605 | 1.2 release. |
606 | |
607 | Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug |
608 | in advansys_biosparam() which was fixed in the 1.3 release. |
609 | |
610 | Erik Ratcliffe <erik@caldera.com> has done testing of the |
611 | AdvanSys driver in the Caldera releases. |
612 | |
613 | Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to |
614 | AscWaitTixISRDone() which he found necessary to make the |
615 | driver work with a SCSI-1 disk. |
616 | |
617 | Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide |
618 | support in the 3.1A driver. |
619 | |
620 | L. AdvanSys Contact Information |
621 | |
622 | Mail: Advanced System Products, Inc. |
623 | 1150 Ringwood Court |
624 | San Jose, CA 95131 |
625 | Operator: 1-408-383-9400 |
626 | FAX: 1-408-383-9612 |
627 | Tech Support: 1-800-525-7440/1-408-467-2930 |
628 | BBS: 1-408-383-9540 (14400,N,8,1) |
629 | Interactive FAX: 1-408-383-9753 |
630 | Customer Direct Sales: 1-800-525-7443/1-408-383-5777 |
631 | Tech Support E-Mail: support@advansys.com |
632 | FTP Site: ftp.advansys.com (login: anonymous) |
633 | Web Site: http://www.advansys.com |
634 | |
635 | */ |
636 | |
637 | |
638 | /* |
639 | * --- Linux Version |
640 | */ |
641 | |
642 | /* Convert Linux Version, Patch-level, Sub-level to LINUX_VERSION_CODE. */ |
643 | #define ASC_LINUX_VERSION(V, P, S)(((V) * 65536) + ((P) * 256) + (S)) (((V) * 65536) + ((P) * 256) + (S)) |
644 | |
645 | #ifndef LINUX_VERSION_CODE131108 |
646 | #include <linux/version.h> |
647 | #endif /* LINUX_VERSION_CODE */ |
648 | |
649 | |
650 | /* |
651 | * --- Linux Include Files |
652 | */ |
653 | |
654 | #include <linux/config.h> |
655 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
656 | #ifdef MODULE |
657 | #include <linux/module.h> |
658 | #endif /* MODULE */ |
659 | #endif /* version >= v1.3.0 */ |
660 | #include <linux/string.h> |
661 | #include <linux/sched.h> |
662 | #include <linux/kernel.h> |
663 | #include <linux/head.h> |
664 | #include <linux/types.h> |
665 | #include <linux/ioport.h> |
666 | #include <linux/delay.h> |
667 | #include <linux/malloc.h> |
668 | #include <linux/mm.h> |
669 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
670 | #include <linux/proc_fs.h> |
671 | #endif /* version >= v1.3.0 */ |
672 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(2,1,23)(((2) * 65536) + ((1) * 256) + (23)) |
673 | #include <linux/init.h> |
674 | #endif /* version >= v2.1.23 */ |
675 | #include <asm/io.h> |
676 | #include <asm/system.h> |
677 | #include <asm/dma.h> |
678 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
679 | #include "../block/blk.h" |
680 | #else /* version >= v1.3.0 */ |
681 | #include <linux/blk.h> |
682 | #include <linux/stat.h> |
683 | #endif /* version >= v1.3.0 */ |
684 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(2,1,95)(((2) * 65536) + ((1) * 256) + (95)) |
685 | #include <asm/spinlock.h> |
686 | #endif /* version >= 2.1.95 */ |
687 | #include "scsi.h" |
688 | #include "hosts.h" |
689 | #include "sd.h" |
690 | #include "advansys.h" |
691 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
692 | #ifdef CONFIG_PCI1 |
693 | #include <linux/pci.h> |
694 | #endif /* CONFIG_PCI */ |
695 | #else /* version < v2.1.93 */ |
696 | /* |
697 | * For earlier than v2.1.93 the driver has its own PCI configuration. |
698 | * If PCI is not needed in a kernel before v2.1.93 this define can be |
699 | * turned-off to make the driver object smaller. |
700 | */ |
701 | #define ASC_CONFIG_PCI |
702 | #endif /* version < v2.1.93 */ |
703 | |
704 | /* |
705 | * If Linux eventually defines a DID_UNDERRUN, the constant here can be |
706 | * removed. The current value of zero for DID_UNDERRUN results in underrun |
707 | * conditions being ignored. |
708 | */ |
709 | #define DID_UNDERRUN0 0 |
710 | |
711 | |
712 | /* |
713 | * --- Driver Options |
714 | */ |
715 | |
716 | /* Enable driver assertions. */ |
717 | #define ADVANSYS_ASSERT |
718 | |
719 | /* Enable driver tracing. */ |
720 | /* #define ADVANSYS_DEBUG */ |
721 | |
722 | /* |
723 | * Because of no /proc to display them, statistics are disabled |
724 | * for versions prior to v1.3.0. |
725 | */ |
726 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
727 | #undef ADVANSYS_STATS /* Disable statistics */ |
728 | #else /* version >= v1.3.0 */ |
729 | #define ADVANSYS_STATS /* Enable statistics. */ |
730 | #endif /* version >= v1.3.0 */ |
731 | |
732 | |
733 | /* |
734 | * --- Debugging Header |
735 | */ |
736 | |
737 | #ifdef ADVANSYS_DEBUG |
738 | #define STATICstatic |
739 | #else /* ADVANSYS_DEBUG */ |
740 | #define STATICstatic static |
741 | #endif /* ADVANSYS_DEBUG */ |
742 | |
743 | |
744 | /* |
745 | * --- Asc Library Constants and Macros |
746 | */ |
747 | |
748 | #define ASC_LIB_VERSION_MAJOR1 1 |
749 | #define ASC_LIB_VERSION_MINOR22 22 |
750 | #define ASC_LIB_SERIAL_NUMBER113 113 |
751 | |
752 | typedef unsigned char uchar; |
753 | |
754 | #ifndef NULL((void *) 0) |
755 | #define NULL((void *) 0) (0) |
756 | #endif |
757 | #ifndef TRUE1 |
758 | #define TRUE1 (1) |
759 | #endif |
760 | #ifndef FALSE0 |
761 | #define FALSE0 (0) |
762 | #endif |
763 | #define REGregister register |
764 | #define rcharregister __s8 REGregister __s8 |
765 | #define rshortregister __s16 REGregister __s16 |
766 | #define rintregister __s32 REGregister __s32 |
767 | #define rlongregister __s32 REGregister __s32 |
768 | #define rucharregister __u8 REGregister __u8 |
769 | #define rushortregister __u16 REGregister __u16 |
770 | #define ruintregister __u32 REGregister __u32 |
771 | #define rulongregister __u32 REGregister __u32 |
772 | #define NULLPTR(void *)0 (void *)0 |
773 | #define FNULLPTR(void *)0UL (void *)0UL |
774 | #define EOF(-1) (-1) |
775 | #define EOS'\0' '\0' |
776 | #define ERR(-1) (-1) |
777 | #define UB_ERR(uchar)(0xFF) (uchar)(0xFF) |
778 | #define UW_ERR(uint)(0xFFFF) (uint)(0xFFFF) |
779 | #define UL_ERR(ulong)(0xFFFFFFFFUL) (ulong)(0xFFFFFFFFUL) |
780 | #define iseven_word(val)((((uint)val) & (uint)0x0001) == 0) ((((uint)val) & (uint)0x0001) == 0) |
781 | #define isodd_word(val)((((uint)val) & (uint)0x0001) != 0) ((((uint)val) & (uint)0x0001) != 0) |
782 | #define toeven_word(val)(((uint)val) & (uint)0xFFFE) (((uint)val) & (uint)0xFFFE) |
783 | #define biton(val, bits)(((uint)(val >> bits) & (uint)0x0001) != 0) (((uint)(val >> bits) & (uint)0x0001) != 0) |
784 | #define bitoff(val, bits)(((uint)(val >> bits) & (uint)0x0001) == 0) (((uint)(val >> bits) & (uint)0x0001) == 0) |
785 | #define lbiton(val, bits)(((ulong)(val >> bits) & (ulong)0x00000001UL) != 0) (((ulong)(val >> bits) & (ulong)0x00000001UL) != 0) |
786 | #define lbitoff(val, bits)(((ulong)(val >> bits) & (ulong)0x00000001UL) == 0) (((ulong)(val >> bits) & (ulong)0x00000001UL) == 0) |
787 | #define absh(val)((val) < 0 ? -(val) : (val)) ((val) < 0 ? -(val) : (val)) |
788 | #define swapbyte(ch)((((ch) << 4) | ((ch) >> 4))) ((((ch) << 4) | ((ch) >> 4))) |
789 | #ifndef GBYTE(0x40000000UL) |
790 | #define GBYTE(0x40000000UL) (0x40000000UL) |
791 | #endif |
792 | #ifndef MBYTE(0x100000UL) |
793 | #define MBYTE(0x100000UL) (0x100000UL) |
794 | #endif |
795 | #ifndef KBYTE(0x400) |
796 | #define KBYTE(0x400) (0x400) |
797 | #endif |
798 | #define HI_BYTE(x)(*((__u8 *)(&x)+1)) (*((__u8 *)(&x)+1)) |
799 | #define LO_BYTE(x)(*((__u8 *)&x)) (*((__u8 *)&x)) |
800 | #define HI_WORD(x)(*((__u16 *)(&x)+1)) (*((__u16 *)(&x)+1)) |
801 | #define LO_WORD(x)(*((__u16 *)&x)) (*((__u16 *)&x)) |
802 | #ifndef MAKEWORD |
803 | #define MAKEWORD(lo, hi)((__u16) (((__u16) lo) | ((__u16) hi << 8))) ((__u16) (((__u16) lo) | ((__u16) hi << 8))) |
804 | #endif |
805 | #ifndef MAKELONG |
806 | #define MAKELONG(lo, hi)((__u32) (((__u32) lo) | ((__u32) hi << 16))) ((__u32) (((__u32) lo) | ((__u32) hi << 16))) |
807 | #endif |
808 | #define SwapWords(dWord)((__u32) ((dWord >> 16) | (dWord << 16))) ((__u32) ((dWord >> 16) | (dWord << 16))) |
809 | #define SwapBytes(word)((__u16) ((word >> 8) | (word << 8))) ((__u16) ((word >> 8) | (word << 8))) |
810 | #define BigToLittle(dWord)((__u32) (((__u32) ((((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) >> 16) | (((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) << 16))))) ((__u32) (SwapWords(MAKELONG(SwapBytes(LO_WORD(dWord)), SwapBytes(HI_WORD(dWord))))((__u32) ((((__u32) (((__u32) ((__u16) (((*((__u16 *)&dWord )) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ( (__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16))) >> 16) | (((__u32) (((__u32) ((__u16) (((*((__u16 *)&dWord) ) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | (( __u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ( (*((__u16 *)(&dWord)+1)) << 8))) << 16))) << 16))))) |
811 | #define LittleToBig(dWord)((__u32) (((__u32) ((((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) >> 16) | (((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) << 16))))) BigToLittle(dWord)((__u32) (((__u32) ((((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) >> 16) | (((__u32) (((__u32) ((__u16) (((*((__u16 * )&dWord)) >> 8) | ((*((__u16 *)&dWord)) << 8)))) | ((__u32) ((__u16) (((*((__u16 *)(&dWord)+1)) >> 8) | ((*((__u16 *)(&dWord)+1)) << 8))) << 16 ))) << 16))))) |
812 | #define AscPCIConfigVendorIDRegister0x0000 0x0000 |
813 | #define AscPCIConfigDeviceIDRegister0x0002 0x0002 |
814 | #define AscPCIConfigCommandRegister0x0004 0x0004 |
815 | #define AscPCIConfigStatusRegister0x0006 0x0006 |
816 | #define AscPCIConfigRevisionIDRegister0x0008 0x0008 |
817 | #define AscPCIConfigCacheSize0x000C 0x000C |
818 | #define AscPCIConfigLatencyTimer0x000D 0x000D |
819 | #define AscPCIIOBaseRegister0x0010 0x0010 |
820 | #define AscPCICmdRegBits_IOMemBusMaster0x0007 0x0007 |
821 | #define ASC_PCI_ID2BUS(id)((id) & 0xFF) ((id) & 0xFF) |
822 | #define ASC_PCI_ID2DEV(id)(((id) >> 11) & 0x1F) (((id) >> 11) & 0x1F) |
823 | #define ASC_PCI_ID2FUNC(id)(((id) >> 8) & 0x7) (((id) >> 8) & 0x7) |
824 | #define ASC_PCI_MKID(bus, dev, func)((((dev) & 0x1F) << 11) | (((func) & 0x7) << 8) | ((bus) & 0xFF)) ((((dev) & 0x1F) << 11) | (((func) & 0x7) << 8) | ((bus) & 0xFF)) |
825 | #define ASC_PCI_VENDORID0x10CD 0x10CD |
826 | #define ASC_PCI_DEVICEID_1200A0x1100 0x1100 |
827 | #define ASC_PCI_DEVICEID_1200B0x1200 0x1200 |
828 | #define ASC_PCI_DEVICEID_ULTRA0x1300 0x1300 |
829 | #define ASC_PCI_REVISION_31500x02 0x02 |
830 | #define ASC_PCI_REVISION_30500x03 0x03 |
831 | |
832 | #define ASC_DVCLIB_CALL_DONE(1) (1) |
833 | #define ASC_DVCLIB_CALL_FAILED(0) (0) |
834 | #define ASC_DVCLIB_CALL_ERROR(-1) (-1) |
835 | |
836 | #define PortAddrunsigned short unsigned short /* port address size */ |
837 | #define Ptr2Funculong ulong |
838 | #define inp(port)((__builtin_constant_p((port)) && (port) < 256) ? __inbc (port) : __inb(port)) inb(port)((__builtin_constant_p((port)) && (port) < 256) ? __inbc (port) : __inb(port)) |
839 | #define inpw(port)((__builtin_constant_p((port)) && (port) < 256) ? __inwc (port) : __inw(port)) inw(port)((__builtin_constant_p((port)) && (port) < 256) ? __inwc (port) : __inw(port)) |
840 | #define inpl(port)((__builtin_constant_p((port)) && (port) < 256) ? __inlc (port) : __inl(port)) inl(port)((__builtin_constant_p((port)) && (port) < 256) ? __inlc (port) : __inl(port)) |
841 | #define outp(port, byte)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outbc(((byte)),((port))) : __outb(((byte)),((port)))) outb((byte), (port))((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outbc(((byte)),((port))) : __outb(((byte)),((port)))) |
842 | #define outpw(port, word)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outwc(((word)),((port))) : __outw(((word)),((port)))) outw((word), (port))((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outwc(((word)),((port))) : __outw(((word)),((port)))) |
843 | #define outpl(port, long)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outlc(((long)),((port))) : __outl(((long)),((port)))) outl((long), (port))((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outlc(((long)),((port))) : __outl(((long)),((port)))) |
844 | #define ASC_MAX_SG_QUEUE7 7 |
845 | #define ASC_MAX_SG_LIST0xff SG_ALL0xff |
846 | |
847 | #define ASC_CS_TYPEunsigned short unsigned short |
848 | #ifndef asc_ptr_type |
849 | #define asc_ptr_type |
850 | #endif |
851 | |
852 | #ifndef ASC_GET_PTR2FUNC |
853 | #define ASC_GET_PTR2FUNC(fun)(ulong)(fun) (Ptr2Funculong)(fun) |
854 | #endif |
855 | #define FLIP_BYTE_NIBBLE(x)(((x<<4)& 0xFF) | (x>>4)) (((x<<4)& 0xFF) | (x>>4)) |
856 | #define ASC_IS_ISA(0x0001) (0x0001) |
857 | #define ASC_IS_ISAPNP(0x0081) (0x0081) |
858 | #define ASC_IS_EISA(0x0002) (0x0002) |
859 | #define ASC_IS_PCI(0x0004) (0x0004) |
860 | #define ASC_IS_PCI_ULTRA(0x0104) (0x0104) |
861 | #define ASC_IS_PCMCIA(0x0008) (0x0008) |
862 | #define ASC_IS_MCA(0x0020) (0x0020) |
863 | #define ASC_IS_VL(0x0040) (0x0040) |
864 | #define ASC_ISA_PNP_PORT_ADDR(0x279) (0x279) |
865 | #define ASC_ISA_PNP_PORT_WRITE((0x279)+0x800) (ASC_ISA_PNP_PORT_ADDR(0x279)+0x800) |
866 | #define ASC_IS_WIDESCSI_16(0x0100) (0x0100) |
867 | #define ASC_IS_WIDESCSI_32(0x0200) (0x0200) |
868 | #define ASC_IS_BIG_ENDIAN(0x8000) (0x8000) |
869 | #define ASC_CHIP_MIN_VER_VL(0x01) (0x01) |
870 | #define ASC_CHIP_MAX_VER_VL(0x07) (0x07) |
871 | #define ASC_CHIP_MIN_VER_PCI(0x09) (0x09) |
872 | #define ASC_CHIP_MAX_VER_PCI(0x0F) (0x0F) |
873 | #define ASC_CHIP_VER_PCI_BIT(0x08) (0x08) |
874 | #define ASC_CHIP_MIN_VER_ISA(0x11) (0x11) |
875 | #define ASC_CHIP_MIN_VER_ISA_PNP(0x21) (0x21) |
876 | #define ASC_CHIP_MAX_VER_ISA(0x27) (0x27) |
877 | #define ASC_CHIP_VER_ISA_BIT(0x30) (0x30) |
878 | #define ASC_CHIP_VER_ISAPNP_BIT(0x20) (0x20) |
879 | #define ASC_CHIP_VER_ASYN_BUG(0x21) (0x21) |
880 | #define ASC_CHIP_VER_PCI0x08 0x08 |
881 | #define ASC_CHIP_VER_PCI_ULTRA_3150(0x08 | 0x02) (ASC_CHIP_VER_PCI0x08 | 0x02) |
882 | #define ASC_CHIP_VER_PCI_ULTRA_3050(0x08 | 0x03) (ASC_CHIP_VER_PCI0x08 | 0x03) |
883 | #define ASC_CHIP_MIN_VER_EISA(0x41) (0x41) |
884 | #define ASC_CHIP_MAX_VER_EISA(0x47) (0x47) |
885 | #define ASC_CHIP_VER_EISA_BIT(0x40) (0x40) |
886 | #define ASC_CHIP_LATEST_VER_EISA(((0x41) - 1) + 3) ((ASC_CHIP_MIN_VER_EISA(0x41) - 1) + 3) |
887 | #define ASC_MAX_LIB_SUPPORTED_ISA_CHIP_VER0x21 0x21 |
888 | #define ASC_MAX_LIB_SUPPORTED_PCI_CHIP_VER0x0A 0x0A |
889 | #define ASC_MAX_VL_DMA_ADDR(0x07FFFFFFL) (0x07FFFFFFL) |
890 | #define ASC_MAX_VL_DMA_COUNT(0x07FFFFFFL) (0x07FFFFFFL) |
891 | #define ASC_MAX_PCI_DMA_ADDR(0xFFFFFFFFL) (0xFFFFFFFFL) |
892 | #define ASC_MAX_PCI_DMA_COUNT(0xFFFFFFFFL) (0xFFFFFFFFL) |
893 | #define ASC_MAX_ISA_DMA_ADDR(0x00FFFFFFL) (0x00FFFFFFL) |
894 | #define ASC_MAX_ISA_DMA_COUNT(0x00FFFFFFL) (0x00FFFFFFL) |
895 | #define ASC_MAX_EISA_DMA_ADDR(0x07FFFFFFL) (0x07FFFFFFL) |
896 | #define ASC_MAX_EISA_DMA_COUNT(0x07FFFFFFL) (0x07FFFFFFL) |
897 | #ifndef inpw_noswap |
898 | #define inpw_noswap(port)((__builtin_constant_p((port)) && (port) < 256) ? __inwc (port) : __inw(port)) inpw(port)((__builtin_constant_p((port)) && (port) < 256) ? __inwc (port) : __inw(port)) |
899 | #endif |
900 | #ifndef outpw_noswap |
901 | #define outpw_noswap(port, data)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outwc(((data)),((port))) : __outw(((data)),((port)))) outpw(port, data)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outwc(((data)),((port))) : __outw(((data)),((port)))) |
902 | #endif |
903 | #define ASC_SCSI_ID_BITS3 3 |
904 | #define ASC_SCSI_TIX_TYPEuchar uchar |
905 | #define ASC_ALL_DEVICE_BIT_SET0xFF 0xFF |
906 | #ifdef ASC_WIDESCSI_16 |
907 | #undef ASC_SCSI_ID_BITS3 |
908 | #define ASC_SCSI_ID_BITS3 4 |
909 | #define ASC_ALL_DEVICE_BIT_SET0xFF 0xFFFF |
910 | #endif |
911 | #ifdef ASC_WIDESCSI_32 |
912 | #undef ASC_SCSI_ID_BITS3 |
913 | #define ASC_SCSI_ID_BITS3 5 |
914 | #define ASC_ALL_DEVICE_BIT_SET0xFF 0xFFFFFFFFL |
915 | #endif |
916 | #if ASC_SCSI_ID_BITS3 == 3 |
917 | #define ASC_SCSI_BIT_ID_TYPEuchar uchar |
918 | #define ASC_MAX_TID7 7 |
919 | #define ASC_MAX_LUN7 7 |
920 | #define ASC_SCSI_WIDTH_BIT_SET0xFF 0xFF |
921 | #elif ASC_SCSI_ID_BITS3 == 4 |
922 | #define ASC_SCSI_BIT_ID_TYPEuchar ushort |
923 | #define ASC_MAX_TID7 15 |
924 | #define ASC_MAX_LUN7 7 |
925 | #define ASC_SCSI_WIDTH_BIT_SET0xFF 0xFFFF |
926 | #elif ASC_SCSI_ID_BITS3 == 5 |
927 | #define ASC_SCSI_BIT_ID_TYPEuchar ulong |
928 | #define ASC_MAX_TID7 31 |
929 | #define ASC_MAX_LUN7 7 |
930 | #define ASC_SCSI_WIDTH_BIT_SET0xFF 0xFFFFFFFF |
931 | #else |
932 | #error ASC_SCSI_ID_BITS3 definition is wrong |
933 | #endif |
934 | #define ASC_MAX_SENSE_LEN32 32 |
935 | #define ASC_MIN_SENSE_LEN14 14 |
936 | #define ASC_MAX_CDB_LEN12 12 |
937 | #define ASC_SCSI_RESET_HOLD_TIME_US60 60 |
938 | #define SCSICMD_TestUnitReady0x00 0x00 |
939 | #define SCSICMD_Rewind0x01 0x01 |
940 | #define SCSICMD_Rezero0x01 0x01 |
941 | #define SCSICMD_RequestSense0x03 0x03 |
942 | #define SCSICMD_Format0x04 0x04 |
943 | #define SCSICMD_FormatUnit0x04 0x04 |
944 | #define SCSICMD_Read60x08 0x08 |
945 | #define SCSICMD_Write60x0A 0x0A |
946 | #define SCSICMD_Seek60x0B 0x0B |
947 | #define SCSICMD_Inquiry0x12 0x12 |
948 | #define SCSICMD_Verify60x13 0x13 |
949 | #define SCSICMD_ModeSelect60x15 0x15 |
950 | #define SCSICMD_ModeSense60x1A 0x1A |
951 | #define SCSICMD_StartStopUnit0x1B 0x1B |
952 | #define SCSICMD_LoadUnloadTape0x1B 0x1B |
953 | #define SCSICMD_ReadCapacity0x25 0x25 |
954 | #define SCSICMD_Read100x28 0x28 |
955 | #define SCSICMD_Write100x2A 0x2A |
956 | #define SCSICMD_Seek100x2B 0x2B |
957 | #define SCSICMD_Erase100x2C 0x2C |
958 | #define SCSICMD_WriteAndVerify100x2E 0x2E |
959 | #define SCSICMD_Verify100x2F 0x2F |
960 | #define SCSICMD_WriteBuffer0x3B 0x3B |
961 | #define SCSICMD_ReadBuffer0x3C 0x3C |
962 | #define SCSICMD_ReadLong0x3E 0x3E |
963 | #define SCSICMD_WriteLong0x3F 0x3F |
964 | #define SCSICMD_ReadTOC0x43 0x43 |
965 | #define SCSICMD_ReadHeader0x44 0x44 |
966 | #define SCSICMD_ModeSelect100x55 0x55 |
967 | #define SCSICMD_ModeSense100x5A 0x5A |
968 | #define SCSI_TYPE_DASD0x00 0x00 |
969 | #define SCSI_TYPE_SASD0x01 0x01 |
970 | #define SCSI_TYPE_PRN0x02 0x02 |
971 | #define SCSI_TYPE_PROC0x03 0x03 |
972 | #define SCSI_TYPE_WORM0x04 0x04 |
973 | #define SCSI_TYPE_CDROM0x05 0x05 |
974 | #define SCSI_TYPE_SCANNER0x06 0x06 |
975 | #define SCSI_TYPE_OPTMEM0x07 0x07 |
976 | #define SCSI_TYPE_MED_CHG0x08 0x08 |
977 | #define SCSI_TYPE_COMM0x09 0x09 |
978 | #define SCSI_TYPE_UNKNOWN0x1F 0x1F |
979 | #define SCSI_TYPE_NO_DVC0xFF 0xFF |
980 | #define ASC_SCSIDIR_NOCHK0x00 0x00 |
981 | #define ASC_SCSIDIR_T2H0x08 0x08 |
982 | #define ASC_SCSIDIR_H2T0x10 0x10 |
983 | #define ASC_SCSIDIR_NODATA0x18 0x18 |
984 | #define SCSI_SENKEY_NO_SENSE0x00 0x00 |
985 | #define SCSI_SENKEY_UNDEFINED0x01 0x01 |
986 | #define SCSI_SENKEY_NOT_READY0x02 0x02 |
987 | #define SCSI_SENKEY_MEDIUM_ERR0x03 0x03 |
988 | #define SCSI_SENKEY_HW_ERR0x04 0x04 |
989 | #define SCSI_SENKEY_ILLEGAL0x05 0x05 |
990 | #define SCSI_SENKEY_ATTENTION0x06 0x06 |
991 | #define SCSI_SENKEY_PROTECTED0x07 0x07 |
992 | #define SCSI_SENKEY_BLANK0x08 0x08 |
993 | #define SCSI_SENKEY_V_UNIQUE0x09 0x09 |
994 | #define SCSI_SENKEY_CPY_ABORT0x0A 0x0A |
995 | #define SCSI_SENKEY_ABORT0x0B 0x0B |
996 | #define SCSI_SENKEY_EQUAL0x0C 0x0C |
997 | #define SCSI_SENKEY_VOL_OVERFLOW0x0D 0x0D |
998 | #define SCSI_SENKEY_MISCOMP0x0E 0x0E |
999 | #define SCSI_SENKEY_RESERVED0x0F 0x0F |
1000 | #define SCSI_ASC_NOMEDIA0x3A 0x3A |
1001 | #define ASC_SRB_HOST(x)((uchar)((uchar)(x) >> 4)) ((uchar)((uchar)(x) >> 4)) |
1002 | #define ASC_SRB_TID(x)((uchar)((uchar)(x) & (uchar)0x0F)) ((uchar)((uchar)(x) & (uchar)0x0F)) |
1003 | #define ASC_SRB_LUN(x)((uchar)((uint)(x) >> 13)) ((uchar)((uint)(x) >> 13)) |
1004 | #define PUT_CDB1(x)((uchar)((uint)(x) >> 8)) ((uchar)((uint)(x) >> 8)) |
1005 | #define SS_GOOD0x00 0x00 |
1006 | #define SS_CHK_CONDITION0x02 0x02 |
1007 | #define SS_CONDITION_MET0x04 0x04 |
1008 | #define SS_TARGET_BUSY0x08 0x08 |
1009 | #define SS_INTERMID0x10 0x10 |
1010 | #define SS_INTERMID_COND_MET0x14 0x14 |
1011 | #define SS_RSERV_CONFLICT0x18 0x18 |
1012 | #define SS_CMD_TERMINATED0x22 0x22 |
1013 | #define SS_QUEUE_FULL0x28 0x28 |
1014 | #define MS_CMD_DONE0x00 0x00 |
1015 | #define MS_EXTEND0x01 0x01 |
1016 | #define MS_SDTR_LEN0x03 0x03 |
1017 | #define MS_SDTR_CODE0x01 0x01 |
1018 | #define MS_WDTR_LEN0x02 0x02 |
1019 | #define MS_WDTR_CODE0x03 0x03 |
1020 | #define MS_MDP_LEN0x05 0x05 |
1021 | #define MS_MDP_CODE0x00 0x00 |
1022 | #define M1_SAVE_DATA_PTR0x02 0x02 |
1023 | #define M1_RESTORE_PTRS0x03 0x03 |
1024 | #define M1_DISCONNECT0x04 0x04 |
1025 | #define M1_INIT_DETECTED_ERR0x05 0x05 |
1026 | #define M1_ABORT0x06 0x06 |
1027 | #define M1_MSG_REJECT0x07 0x07 |
1028 | #define M1_NO_OP0x08 0x08 |
1029 | #define M1_MSG_PARITY_ERR0x09 0x09 |
1030 | #define M1_LINK_CMD_DONE0x0A 0x0A |
1031 | #define M1_LINK_CMD_DONE_WFLAG0x0B 0x0B |
1032 | #define M1_BUS_DVC_RESET0x0C 0x0C |
1033 | #define M1_ABORT_TAG0x0D 0x0D |
1034 | #define M1_CLR_QUEUE0x0E 0x0E |
1035 | #define M1_INIT_RECOVERY0x0F 0x0F |
1036 | #define M1_RELEASE_RECOVERY0x10 0x10 |
1037 | #define M1_KILL_IO_PROC0x11 0x11 |
1038 | #define M2_QTAG_MSG_SIMPLE0x20 0x20 |
1039 | #define M2_QTAG_MSG_HEAD0x21 0x21 |
1040 | #define M2_QTAG_MSG_ORDERED0x22 0x22 |
1041 | #define M2_IGNORE_WIDE_RESIDUE0x23 0x23 |
1042 | |
1043 | typedef struct { |
1044 | uchar peri_dvc_type:5; |
1045 | uchar peri_qualifier:3; |
1046 | } ASC_SCSI_INQ0; |
1047 | |
1048 | typedef struct { |
1049 | uchar dvc_type_modifier:7; |
1050 | uchar rmb:1; |
1051 | } ASC_SCSI_INQ1; |
1052 | |
1053 | typedef struct { |
1054 | uchar ansi_apr_ver:3; |
1055 | uchar ecma_ver:3; |
1056 | uchar iso_ver:2; |
1057 | } ASC_SCSI_INQ2; |
1058 | |
1059 | typedef struct { |
1060 | uchar rsp_data_fmt:4; |
1061 | uchar res:2; |
1062 | uchar TemIOP:1; |
1063 | uchar aenc:1; |
1064 | } ASC_SCSI_INQ3; |
1065 | |
1066 | typedef struct { |
1067 | uchar StfRe:1; |
1068 | uchar CmdQue:1; |
1069 | uchar Reserved:1; |
1070 | uchar Linked:1; |
1071 | uchar Sync:1; |
1072 | uchar WBus16:1; |
1073 | uchar WBus32:1; |
1074 | uchar RelAdr:1; |
1075 | } ASC_SCSI_INQ7; |
1076 | |
1077 | typedef struct { |
1078 | ASC_SCSI_INQ0 byte0; |
1079 | ASC_SCSI_INQ1 byte1; |
1080 | ASC_SCSI_INQ2 byte2; |
1081 | ASC_SCSI_INQ3 byte3; |
1082 | uchar add_len; |
1083 | uchar res1; |
1084 | uchar res2; |
1085 | ASC_SCSI_INQ7 byte7; |
1086 | uchar vendor_id[8]; |
1087 | uchar product_id[16]; |
1088 | uchar product_rev_level[4]; |
1089 | } ASC_SCSI_INQUIRY; |
1090 | |
1091 | typedef struct asc_req_sense { |
1092 | uchar err_code:7; |
1093 | uchar info_valid:1; |
1094 | uchar segment_no; |
1095 | uchar sense_key:4; |
1096 | uchar reserved_bit:1; |
1097 | uchar sense_ILI:1; |
1098 | uchar sense_EOM:1; |
1099 | uchar file_mark:1; |
1100 | uchar info1[4]; |
1101 | uchar add_sense_len; |
1102 | uchar cmd_sp_info[4]; |
1103 | uchar asc; |
1104 | uchar ascq; |
1105 | uchar fruc; |
1106 | uchar sks_byte0:7; |
1107 | uchar sks_valid:1; |
1108 | uchar sks_bytes[2]; |
1109 | uchar notused[2]; |
1110 | uchar ex_sense_code; |
1111 | uchar info2[4]; |
1112 | } ASC_REQ_SENSE; |
1113 | |
1114 | #define ASC_SG_LIST_PER_Q7 7 |
1115 | #define QS_FREE0x00 0x00 |
1116 | #define QS_READY0x01 0x01 |
1117 | #define QS_DISC10x02 0x02 |
1118 | #define QS_DISC20x04 0x04 |
1119 | #define QS_BUSY0x08 0x08 |
1120 | #define QS_ABORTED0x40 0x40 |
1121 | #define QS_DONE0x80 0x80 |
1122 | #define QC_NO_CALLBACK0x01 0x01 |
1123 | #define QC_SG_SWAP_QUEUE0x02 0x02 |
1124 | #define QC_SG_HEAD0x04 0x04 |
1125 | #define QC_DATA_IN0x08 0x08 |
1126 | #define QC_DATA_OUT0x10 0x10 |
1127 | #define QC_URGENT0x20 0x20 |
1128 | #define QC_MSG_OUT0x40 0x40 |
1129 | #define QC_REQ_SENSE0x80 0x80 |
1130 | #define QCSG_SG_XFER_LIST0x02 0x02 |
1131 | #define QCSG_SG_XFER_MORE0x04 0x04 |
1132 | #define QCSG_SG_XFER_END0x08 0x08 |
1133 | #define QD_IN_PROGRESS0x00 0x00 |
1134 | #define QD_NO_ERROR0x01 0x01 |
1135 | #define QD_ABORTED_BY_HOST0x02 0x02 |
1136 | #define QD_WITH_ERROR0x04 0x04 |
1137 | #define QD_INVALID_REQUEST0x80 0x80 |
1138 | #define QD_INVALID_HOST_NUM0x81 0x81 |
1139 | #define QD_INVALID_DEVICE0x82 0x82 |
1140 | #define QD_ERR_INTERNAL0xFF 0xFF |
1141 | #define QHSTA_NO_ERROR0x00 0x00 |
1142 | #define QHSTA_M_SEL_TIMEOUT0x11 0x11 |
1143 | #define QHSTA_M_DATA_OVER_RUN0x12 0x12 |
1144 | #define QHSTA_M_DATA_UNDER_RUN0x12 0x12 |
1145 | #define QHSTA_M_UNEXPECTED_BUS_FREE0x13 0x13 |
1146 | #define QHSTA_M_BAD_BUS_PHASE_SEQ0x14 0x14 |
1147 | #define QHSTA_D_QDONE_SG_LIST_CORRUPTED0x21 0x21 |
1148 | #define QHSTA_D_ASC_DVC_ERROR_CODE_SET0x22 0x22 |
1149 | #define QHSTA_D_HOST_ABORT_FAILED0x23 0x23 |
1150 | #define QHSTA_D_EXE_SCSI_Q_FAILED0x24 0x24 |
1151 | #define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT0x25 0x25 |
1152 | #define QHSTA_D_ASPI_NO_BUF_POOL0x26 0x26 |
1153 | #define QHSTA_M_WTM_TIMEOUT0x41 0x41 |
1154 | #define QHSTA_M_BAD_CMPL_STATUS_IN0x42 0x42 |
1155 | #define QHSTA_M_NO_AUTO_REQ_SENSE0x43 0x43 |
1156 | #define QHSTA_M_AUTO_REQ_SENSE_FAIL0x44 0x44 |
1157 | #define QHSTA_M_TARGET_STATUS_BUSY0x45 0x45 |
1158 | #define QHSTA_M_BAD_TAG_CODE0x46 0x46 |
1159 | #define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY0x47 0x47 |
1160 | #define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET0x48 0x48 |
1161 | #define QHSTA_D_LRAM_CMP_ERROR0x81 0x81 |
1162 | #define QHSTA_M_MICRO_CODE_ERROR_HALT0xA1 0xA1 |
1163 | #define ASC_FLAG_SCSIQ_REQ0x01 0x01 |
1164 | #define ASC_FLAG_BIOS_SCSIQ_REQ0x02 0x02 |
1165 | #define ASC_FLAG_BIOS_ASYNC_IO0x04 0x04 |
1166 | #define ASC_FLAG_SRB_LINEAR_ADDR0x08 0x08 |
1167 | #define ASC_FLAG_WIN160x10 0x10 |
1168 | #define ASC_FLAG_WIN320x20 0x20 |
1169 | #define ASC_FLAG_ISA_OVER_16MB0x40 0x40 |
1170 | #define ASC_FLAG_DOS_VM_CALLBACK0x80 0x80 |
1171 | #define ASC_TAG_FLAG_EXTRA_BYTES0x10 0x10 |
1172 | #define ASC_TAG_FLAG_DISABLE_DISCONNECT0x04 0x04 |
1173 | #define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX0x08 0x08 |
1174 | #define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST0x40 0x40 |
1175 | #define ASC_SCSIQ_CPY_BEG4 4 |
1176 | #define ASC_SCSIQ_SGHD_CPY_BEG2 2 |
1177 | #define ASC_SCSIQ_B_FWD0 0 |
1178 | #define ASC_SCSIQ_B_BWD1 1 |
1179 | #define ASC_SCSIQ_B_STATUS2 2 |
1180 | #define ASC_SCSIQ_B_QNO3 3 |
1181 | #define ASC_SCSIQ_B_CNTL4 4 |
1182 | #define ASC_SCSIQ_B_SG_QUEUE_CNT5 5 |
1183 | #define ASC_SCSIQ_D_DATA_ADDR8 8 |
1184 | #define ASC_SCSIQ_D_DATA_CNT12 12 |
1185 | #define ASC_SCSIQ_B_SENSE_LEN20 20 |
1186 | #define ASC_SCSIQ_DONE_INFO_BEG22 22 |
1187 | #define ASC_SCSIQ_D_SRBPTR22 22 |
1188 | #define ASC_SCSIQ_B_TARGET_IX26 26 |
1189 | #define ASC_SCSIQ_B_CDB_LEN28 28 |
1190 | #define ASC_SCSIQ_B_TAG_CODE29 29 |
1191 | #define ASC_SCSIQ_W_VM_ID30 30 |
1192 | #define ASC_SCSIQ_DONE_STATUS32 32 |
1193 | #define ASC_SCSIQ_HOST_STATUS33 33 |
1194 | #define ASC_SCSIQ_SCSI_STATUS34 34 |
1195 | #define ASC_SCSIQ_CDB_BEG36 36 |
1196 | #define ASC_SCSIQ_DW_REMAIN_XFER_ADDR56 56 |
1197 | #define ASC_SCSIQ_DW_REMAIN_XFER_CNT60 60 |
1198 | #define ASC_SCSIQ_B_SG_WK_QP49 49 |
1199 | #define ASC_SCSIQ_B_SG_WK_IX50 50 |
1200 | #define ASC_SCSIQ_W_REQ_COUNT52 52 |
1201 | #define ASC_SCSIQ_B_LIST_CNT6 6 |
1202 | #define ASC_SCSIQ_B_CUR_LIST_CNT7 7 |
1203 | #define ASC_SGQ_B_SG_CNTL4 4 |
1204 | #define ASC_SGQ_B_SG_HEAD_QP5 5 |
1205 | #define ASC_SGQ_B_SG_LIST_CNT6 6 |
1206 | #define ASC_SGQ_B_SG_CUR_LIST_CNT7 7 |
1207 | #define ASC_SGQ_LIST_BEG8 8 |
1208 | #define ASC_DEF_SCSI1_QNG4 4 |
1209 | #define ASC_MAX_SCSI1_QNG4 4 |
1210 | #define ASC_DEF_SCSI2_QNG16 16 |
1211 | #define ASC_MAX_SCSI2_QNG32 32 |
1212 | #define ASC_TAG_CODE_MASK0x23 0x23 |
1213 | #define ASC_STOP_REQ_RISC_STOP0x01 0x01 |
1214 | #define ASC_STOP_ACK_RISC_STOP0x03 0x03 |
1215 | #define ASC_STOP_CLEAN_UP_BUSY_Q0x10 0x10 |
1216 | #define ASC_STOP_CLEAN_UP_DISC_Q0x20 0x20 |
1217 | #define ASC_STOP_HOST_REQ_RISC_HALT0x40 0x40 |
1218 | #define ASC_TIDLUN_TO_IX(tid, lun)(uchar)((tid) + ((lun)<<3)) (ASC_SCSI_TIX_TYPEuchar)((tid) + ((lun)<<ASC_SCSI_ID_BITS3)) |
1219 | #define ASC_TID_TO_TARGET_ID(tid)(uchar)(0x01 << (tid)) (ASC_SCSI_BIT_ID_TYPEuchar)(0x01 << (tid)) |
1220 | #define ASC_TIX_TO_TARGET_ID(tix)(0x01 << ((tix) & 7)) (0x01 << ((tix) & ASC_MAX_TID7)) |
1221 | #define ASC_TIX_TO_TID(tix)((tix) & 7) ((tix) & ASC_MAX_TID7) |
1222 | #define ASC_TID_TO_TIX(tid)((tid) & 7) ((tid) & ASC_MAX_TID7) |
1223 | #define ASC_TIX_TO_LUN(tix)(((tix) >> 3) & 7) (((tix) >> ASC_SCSI_ID_BITS3) & ASC_MAX_LUN7) |
1224 | #define ASC_QNO_TO_QADDR(q_no)(((0x4000))+((int)(q_no) << 6)) ((ASC_QADR_BEG(0x4000))+((int)(q_no) << 6)) |
1225 | |
1226 | typedef struct asc_scisq_1 { |
1227 | uchar status; |
1228 | uchar q_no; |
1229 | uchar cntl; |
1230 | uchar sg_queue_cnt; |
1231 | uchar target_id; |
1232 | uchar target_lun; |
1233 | ulong data_addr; |
1234 | ulong data_cnt; |
1235 | ulong sense_addr; |
1236 | uchar sense_len; |
1237 | uchar extra_bytes; |
1238 | } ASC_SCSIQ_1; |
1239 | |
1240 | typedef struct asc_scisq_2 { |
1241 | ulong srb_ptr; |
1242 | uchar target_ix; |
1243 | uchar flag; |
1244 | uchar cdb_len; |
1245 | uchar tag_code; |
1246 | ushort vm_id; |
1247 | } ASC_SCSIQ_2; |
1248 | |
1249 | typedef struct asc_scsiq_3 { |
1250 | uchar done_stat; |
1251 | uchar host_stat; |
1252 | uchar scsi_stat; |
1253 | uchar scsi_msg; |
1254 | } ASC_SCSIQ_3; |
1255 | |
1256 | typedef struct asc_scsiq_4 { |
1257 | uchar cdb[ASC_MAX_CDB_LEN12]; |
1258 | uchar y_first_sg_list_qp; |
1259 | uchar y_working_sg_qp; |
1260 | uchar y_working_sg_ix; |
1261 | uchar y_res; |
1262 | ushort x_req_count; |
1263 | ushort x_reconnect_rtn; |
1264 | ulong x_saved_data_addr; |
1265 | ulong x_saved_data_cnt; |
1266 | } ASC_SCSIQ_4; |
1267 | |
1268 | typedef struct asc_q_done_info { |
1269 | ASC_SCSIQ_2 d2; |
1270 | ASC_SCSIQ_3 d3; |
1271 | uchar q_status; |
1272 | uchar q_no; |
1273 | uchar cntl; |
1274 | uchar sense_len; |
1275 | uchar extra_bytes; |
1276 | uchar res; |
1277 | ulong remain_bytes; |
1278 | } ASC_QDONE_INFO; |
1279 | |
1280 | typedef struct asc_sg_list { |
1281 | ulong addr; |
1282 | ulong bytes; |
1283 | } ASC_SG_LIST; |
1284 | |
1285 | typedef struct asc_sg_head { |
1286 | ushort entry_cnt; |
1287 | ushort queue_cnt; |
1288 | ushort entry_to_copy; |
1289 | ushort res; |
1290 | ASC_SG_LIST sg_list[ASC_MAX_SG_LIST0xff]; |
1291 | } ASC_SG_HEAD; |
1292 | |
1293 | #define ASC_MIN_SG_LIST2 2 |
1294 | |
1295 | typedef struct asc_min_sg_head { |
1296 | ushort entry_cnt; |
1297 | ushort queue_cnt; |
1298 | ushort entry_to_copy; |
1299 | ushort res; |
1300 | ASC_SG_LIST sg_list[ASC_MIN_SG_LIST2]; |
1301 | } ASC_MIN_SG_HEAD; |
1302 | |
1303 | #define QCX_SORT(0x0001) (0x0001) |
1304 | #define QCX_COALEASE(0x0002) (0x0002) |
1305 | |
1306 | typedef struct asc_scsi_q { |
1307 | ASC_SCSIQ_1 q1; |
1308 | ASC_SCSIQ_2 q2; |
1309 | uchar *cdbptr; |
1310 | ASC_SG_HEAD *sg_head; |
1311 | } ASC_SCSI_Q; |
1312 | |
1313 | typedef struct asc_scsi_req_q { |
1314 | ASC_SCSIQ_1 r1; |
1315 | ASC_SCSIQ_2 r2; |
1316 | uchar *cdbptr; |
1317 | ASC_SG_HEAD *sg_head; |
1318 | uchar *sense_ptr; |
1319 | ASC_SCSIQ_3 r3; |
1320 | uchar cdb[ASC_MAX_CDB_LEN12]; |
1321 | uchar sense[ASC_MIN_SENSE_LEN14]; |
1322 | } ASC_SCSI_REQ_Q; |
1323 | |
1324 | typedef struct asc_scsi_bios_req_q { |
1325 | ASC_SCSIQ_1 r1; |
1326 | ASC_SCSIQ_2 r2; |
1327 | uchar *cdbptr; |
1328 | ASC_SG_HEAD *sg_head; |
1329 | uchar *sense_ptr; |
1330 | ASC_SCSIQ_3 r3; |
1331 | uchar cdb[ASC_MAX_CDB_LEN12]; |
1332 | uchar sense[ASC_MIN_SENSE_LEN14]; |
1333 | } ASC_SCSI_BIOS_REQ_Q; |
1334 | |
1335 | typedef struct asc_risc_q { |
1336 | uchar fwd; |
1337 | uchar bwd; |
1338 | ASC_SCSIQ_1 i1; |
1339 | ASC_SCSIQ_2 i2; |
1340 | ASC_SCSIQ_3 i3; |
1341 | ASC_SCSIQ_4 i4; |
1342 | } ASC_RISC_Q; |
1343 | |
1344 | typedef struct asc_sg_list_q { |
1345 | uchar seq_no; |
1346 | uchar q_no; |
1347 | uchar cntl; |
1348 | uchar sg_head_qp; |
1349 | uchar sg_list_cnt; |
1350 | uchar sg_cur_list_cnt; |
1351 | } ASC_SG_LIST_Q; |
1352 | |
1353 | typedef struct asc_risc_sg_list_q { |
1354 | uchar fwd; |
1355 | uchar bwd; |
1356 | ASC_SG_LIST_Q sg; |
1357 | ASC_SG_LIST sg_list[7]; |
1358 | } ASC_RISC_SG_LIST_Q; |
1359 | |
1360 | #define ASC_EXE_SCSI_IO_MAX_IDLE_LOOP0x1000000UL 0x1000000UL |
1361 | #define ASC_EXE_SCSI_IO_MAX_WAIT_LOOP1024 1024 |
1362 | #define ASCQ_ERR_NO_ERROR0 0 |
1363 | #define ASCQ_ERR_IO_NOT_FOUND1 1 |
1364 | #define ASCQ_ERR_LOCAL_MEM2 2 |
1365 | #define ASCQ_ERR_CHKSUM3 3 |
1366 | #define ASCQ_ERR_START_CHIP4 4 |
1367 | #define ASCQ_ERR_INT_TARGET_ID5 5 |
1368 | #define ASCQ_ERR_INT_LOCAL_MEM6 6 |
1369 | #define ASCQ_ERR_HALT_RISC7 7 |
1370 | #define ASCQ_ERR_GET_ASPI_ENTRY8 8 |
1371 | #define ASCQ_ERR_CLOSE_ASPI9 9 |
1372 | #define ASCQ_ERR_HOST_INQUIRY0x0A 0x0A |
1373 | #define ASCQ_ERR_SAVED_SRB_BAD0x0B 0x0B |
1374 | #define ASCQ_ERR_QCNTL_SG_LIST0x0C 0x0C |
1375 | #define ASCQ_ERR_Q_STATUS0x0D 0x0D |
1376 | #define ASCQ_ERR_WR_SCSIQ0x0E 0x0E |
1377 | #define ASCQ_ERR_PC_ADDR0x0F 0x0F |
1378 | #define ASCQ_ERR_SYN_OFFSET0x10 0x10 |
1379 | #define ASCQ_ERR_SYN_XFER_TIME0x11 0x11 |
1380 | #define ASCQ_ERR_LOCK_DMA0x12 0x12 |
1381 | #define ASCQ_ERR_UNLOCK_DMA0x13 0x13 |
1382 | #define ASCQ_ERR_VDS_CHK_INSTALL0x14 0x14 |
1383 | #define ASCQ_ERR_MICRO_CODE_HALT0x15 0x15 |
1384 | #define ASCQ_ERR_SET_LRAM_ADDR0x16 0x16 |
1385 | #define ASCQ_ERR_CUR_QNG0x17 0x17 |
1386 | #define ASCQ_ERR_SG_Q_LINKS0x18 0x18 |
1387 | #define ASCQ_ERR_SCSIQ_PTR0x19 0x19 |
1388 | #define ASCQ_ERR_ISR_RE_ENTRY0x1A 0x1A |
1389 | #define ASCQ_ERR_CRITICAL_RE_ENTRY0x1B 0x1B |
1390 | #define ASCQ_ERR_ISR_ON_CRITICAL0x1C 0x1C |
1391 | #define ASCQ_ERR_SG_LIST_ODD_ADDRESS0x1D 0x1D |
1392 | #define ASCQ_ERR_XFER_ADDRESS_TOO_BIG0x1E 0x1E |
1393 | #define ASCQ_ERR_SCSIQ_NULL_PTR0x1F 0x1F |
1394 | #define ASCQ_ERR_SCSIQ_BAD_NEXT_PTR0x20 0x20 |
1395 | #define ASCQ_ERR_GET_NUM_OF_FREE_Q0x21 0x21 |
1396 | #define ASCQ_ERR_SEND_SCSI_Q0x22 0x22 |
1397 | #define ASCQ_ERR_HOST_REQ_RISC_HALT0x23 0x23 |
1398 | #define ASCQ_ERR_RESET_SDTR0x24 0x24 |
1399 | #define ASC_WARN_NO_ERROR0x0000 0x0000 |
1400 | #define ASC_WARN_IO_PORT_ROTATE0x0001 0x0001 |
1401 | #define ASC_WARN_EEPROM_CHKSUM0x0002 0x0002 |
1402 | #define ASC_WARN_IRQ_MODIFIED0x0004 0x0004 |
1403 | #define ASC_WARN_AUTO_CONFIG0x0008 0x0008 |
1404 | #define ASC_WARN_CMD_QNG_CONFLICT0x0010 0x0010 |
1405 | #define ASC_WARN_EEPROM_RECOVER0x0020 0x0020 |
1406 | #define ASC_WARN_CFG_MSW_RECOVER0x0040 0x0040 |
1407 | #define ASC_WARN_SET_PCI_CONFIG_SPACE0x0080 0x0080 |
1408 | #define ASC_IERR_WRITE_EEPROM0x0001 0x0001 |
1409 | #define ASC_IERR_MCODE_CHKSUM0x0002 0x0002 |
1410 | #define ASC_IERR_SET_PC_ADDR0x0004 0x0004 |
1411 | #define ASC_IERR_START_STOP_CHIP0x0008 0x0008 |
1412 | #define ASC_IERR_IRQ_NO0x0010 0x0010 |
1413 | #define ASC_IERR_SET_IRQ_NO0x0020 0x0020 |
1414 | #define ASC_IERR_CHIP_VERSION0x0040 0x0040 |
1415 | #define ASC_IERR_SET_SCSI_ID0x0080 0x0080 |
1416 | #define ASC_IERR_GET_PHY_ADDR0x0100 0x0100 |
1417 | #define ASC_IERR_BAD_SIGNATURE0x0200 0x0200 |
1418 | #define ASC_IERR_NO_BUS_TYPE0x0400 0x0400 |
1419 | #define ASC_IERR_SCAM0x0800 0x0800 |
1420 | #define ASC_IERR_SET_SDTR0x1000 0x1000 |
1421 | #define ASC_IERR_RW_LRAM0x8000 0x8000 |
1422 | #define ASC_DEF_IRQ_NO10 10 |
1423 | #define ASC_MAX_IRQ_NO15 15 |
1424 | #define ASC_MIN_IRQ_NO10 10 |
1425 | #define ASC_MIN_REMAIN_Q(0x02) (0x02) |
1426 | #define ASC_DEF_MAX_TOTAL_QNG(0xF0) (0xF0) |
1427 | #define ASC_MIN_TAG_Q_PER_DVC(0x04) (0x04) |
1428 | #define ASC_DEF_TAG_Q_PER_DVC(0x04) (0x04) |
1429 | #define ASC_MIN_FREE_Q(0x02) ASC_MIN_REMAIN_Q(0x02) |
1430 | #define ASC_MIN_TOTAL_QNG((7)+((0x02))) ((ASC_MAX_SG_QUEUE7)+(ASC_MIN_FREE_Q(0x02))) |
1431 | #define ASC_MAX_TOTAL_QNG240 240 |
1432 | #define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG16 16 |
1433 | #define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG8 8 |
1434 | #define ASC_MAX_PCI_INRAM_TOTAL_QNG20 20 |
1435 | #define ASC_MAX_INRAM_TAG_QNG16 16 |
1436 | #define ASC_IOADR_TABLE_MAX_IX11 11 |
1437 | #define ASC_IOADR_GAP0x10 0x10 |
1438 | #define ASC_SEARCH_IOP_GAP0x10 0x10 |
1439 | #define ASC_MIN_IOP_ADDR(unsigned short)0x0100 (PortAddrunsigned short)0x0100 |
1440 | #define ASC_MAX_IOP_ADDR(unsigned short)0x3F0 (PortAddrunsigned short)0x3F0 |
1441 | #define ASC_IOADR_1(unsigned short)0x0110 (PortAddrunsigned short)0x0110 |
1442 | #define ASC_IOADR_2(unsigned short)0x0130 (PortAddrunsigned short)0x0130 |
1443 | #define ASC_IOADR_3(unsigned short)0x0150 (PortAddrunsigned short)0x0150 |
1444 | #define ASC_IOADR_4(unsigned short)0x0190 (PortAddrunsigned short)0x0190 |
1445 | #define ASC_IOADR_5(unsigned short)0x0210 (PortAddrunsigned short)0x0210 |
1446 | #define ASC_IOADR_6(unsigned short)0x0230 (PortAddrunsigned short)0x0230 |
1447 | #define ASC_IOADR_7(unsigned short)0x0250 (PortAddrunsigned short)0x0250 |
1448 | #define ASC_IOADR_8(unsigned short)0x0330 (PortAddrunsigned short)0x0330 |
1449 | #define ASC_IOADR_DEF(unsigned short)0x0330 ASC_IOADR_8(unsigned short)0x0330 |
1450 | #define ASC_LIB_SCSIQ_WK_SP256 256 |
1451 | #define ASC_MAX_SYN_XFER_NO16 16 |
1452 | #define ASC_SYN_MAX_OFFSET0x0F 0x0F |
1453 | #define ASC_DEF_SDTR_OFFSET0x0F 0x0F |
1454 | #define ASC_DEF_SDTR_INDEX0x00 0x00 |
1455 | #define ASC_SDTR_ULTRA_PCI_10MB_INDEX0x02 0x02 |
1456 | #define SYN_XFER_NS_025 25 |
1457 | #define SYN_XFER_NS_130 30 |
1458 | #define SYN_XFER_NS_235 35 |
1459 | #define SYN_XFER_NS_340 40 |
1460 | #define SYN_XFER_NS_450 50 |
1461 | #define SYN_XFER_NS_560 60 |
1462 | #define SYN_XFER_NS_670 70 |
1463 | #define SYN_XFER_NS_785 85 |
1464 | #define SYN_ULTRA_XFER_NS_012 12 |
1465 | #define SYN_ULTRA_XFER_NS_119 19 |
1466 | #define SYN_ULTRA_XFER_NS_225 25 |
1467 | #define SYN_ULTRA_XFER_NS_332 32 |
1468 | #define SYN_ULTRA_XFER_NS_438 38 |
1469 | #define SYN_ULTRA_XFER_NS_544 44 |
1470 | #define SYN_ULTRA_XFER_NS_650 50 |
1471 | #define SYN_ULTRA_XFER_NS_757 57 |
1472 | #define SYN_ULTRA_XFER_NS_863 63 |
1473 | #define SYN_ULTRA_XFER_NS_969 69 |
1474 | #define SYN_ULTRA_XFER_NS_1075 75 |
1475 | #define SYN_ULTRA_XFER_NS_1182 82 |
1476 | #define SYN_ULTRA_XFER_NS_1288 88 |
1477 | #define SYN_ULTRA_XFER_NS_1394 94 |
1478 | #define SYN_ULTRA_XFER_NS_14100 100 |
1479 | #define SYN_ULTRA_XFER_NS_15107 107 |
1480 | |
1481 | typedef struct ext_msg { |
1482 | uchar msg_type; |
1483 | uchar msg_len; |
1484 | uchar msg_req; |
1485 | union { |
1486 | struct { |
1487 | uchar sdtr_xfer_period; |
1488 | uchar sdtr_req_ack_offset; |
1489 | } sdtr; |
1490 | struct { |
1491 | uchar wdtr_widthu_ext_msg.wdtr.wdtr_width; |
1492 | } wdtr; |
1493 | struct { |
1494 | uchar mdp_b3u_ext_msg.mdp_b3; |
1495 | uchar mdp_b2u_ext_msg.mdp_b2; |
1496 | uchar mdp_b1u_ext_msg.mdp_b1; |
1497 | uchar mdp_b0u_ext_msg.mdp_b0; |
1498 | } mdp; |
1499 | } u_ext_msg; |
1500 | uchar res; |
1501 | } EXT_MSG; |
1502 | |
1503 | #define xfer_periodu_ext_msg.sdtr.sdtr_xfer_period u_ext_msg.sdtr.sdtr_xfer_period |
1504 | #define req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset |
1505 | #define wdtr_widthu_ext_msg.wdtr.wdtr_width u_ext_msg.wdtr.wdtr_widthu_ext_msg.wdtr.wdtr_width |
1506 | #define mdp_b3u_ext_msg.mdp_b3 u_ext_msg.mdp_b3u_ext_msg.mdp_b3 |
1507 | #define mdp_b2u_ext_msg.mdp_b2 u_ext_msg.mdp_b2u_ext_msg.mdp_b2 |
1508 | #define mdp_b1u_ext_msg.mdp_b1 u_ext_msg.mdp_b1u_ext_msg.mdp_b1 |
1509 | #define mdp_b0u_ext_msg.mdp_b0 u_ext_msg.mdp_b0u_ext_msg.mdp_b0 |
1510 | |
1511 | typedef struct asc_dvc_cfg { |
1512 | ASC_SCSI_BIT_ID_TYPEuchar can_tagged_qng; |
1513 | ASC_SCSI_BIT_ID_TYPEuchar cmd_qng_enabled; |
1514 | ASC_SCSI_BIT_ID_TYPEuchar disc_enable; |
1515 | ASC_SCSI_BIT_ID_TYPEuchar sdtr_enable; |
1516 | uchar chip_scsi_id:4; |
1517 | uchar isa_dma_speed:4; |
1518 | uchar isa_dma_channel; |
1519 | uchar chip_version; |
1520 | ushort pci_device_id; |
1521 | ushort lib_serial_no; |
1522 | ushort lib_version; |
1523 | ushort mcode_date; |
1524 | ushort mcode_version; |
1525 | uchar max_tag_qng[ASC_MAX_TID7 + 1]; |
1526 | uchar *overrun_buf; |
1527 | uchar sdtr_period_offset[ASC_MAX_TID7 + 1]; |
1528 | ushort pci_slot_info; |
1529 | uchar adapter_info[6]; |
1530 | } ASC_DVC_CFG; |
1531 | |
1532 | #define ASC_DEF_DVC_CNTL0xFFFF 0xFFFF |
1533 | #define ASC_DEF_CHIP_SCSI_ID7 7 |
1534 | #define ASC_DEF_ISA_DMA_SPEED4 4 |
1535 | #define ASC_INIT_STATE_NULL0x0000 0x0000 |
1536 | #define ASC_INIT_STATE_BEG_GET_CFG0x0001 0x0001 |
1537 | #define ASC_INIT_STATE_END_GET_CFG0x0002 0x0002 |
1538 | #define ASC_INIT_STATE_BEG_SET_CFG0x0004 0x0004 |
1539 | #define ASC_INIT_STATE_END_SET_CFG0x0008 0x0008 |
1540 | #define ASC_INIT_STATE_BEG_LOAD_MC0x0010 0x0010 |
1541 | #define ASC_INIT_STATE_END_LOAD_MC0x0020 0x0020 |
1542 | #define ASC_INIT_STATE_BEG_INQUIRY0x0040 0x0040 |
1543 | #define ASC_INIT_STATE_END_INQUIRY0x0080 0x0080 |
1544 | #define ASC_INIT_RESET_SCSI_DONE0x0100 0x0100 |
1545 | #define ASC_INIT_STATE_WITHOUT_EEP0x8000 0x8000 |
1546 | #define ASC_PCI_DEVICE_ID_REV_A0x1100 0x1100 |
1547 | #define ASC_PCI_DEVICE_ID_REV_B0x1200 0x1200 |
1548 | #define ASC_BUG_FIX_IF_NOT_DWB0x0001 0x0001 |
1549 | #define ASC_BUG_FIX_ASYN_USE_SYN0x0002 0x0002 |
1550 | #define ASYN_SDTR_DATA_FIX_PCI_REV_AB0x41 0x41 |
1551 | #define ASC_MIN_TAGGED_CMD7 7 |
1552 | #define ASC_MAX_SCSI_RESET_WAIT30 30 |
1553 | |
1554 | typedef struct asc_dvc_var { |
1555 | PortAddrunsigned short iop_base; |
1556 | ushort err_code; |
1557 | ushort dvc_cntl; |
1558 | ushort bug_fix_cntl; |
1559 | ushort bus_type; |
1560 | Ptr2Funculong isr_callback; |
1561 | Ptr2Funculong exe_callback; |
1562 | ASC_SCSI_BIT_ID_TYPEuchar init_sdtr; |
1563 | ASC_SCSI_BIT_ID_TYPEuchar sdtr_done; |
1564 | ASC_SCSI_BIT_ID_TYPEuchar use_tagged_qng; |
1565 | ASC_SCSI_BIT_ID_TYPEuchar unit_not_ready; |
1566 | ASC_SCSI_BIT_ID_TYPEuchar queue_full_or_busy; |
1567 | ASC_SCSI_BIT_ID_TYPEuchar start_motor; |
1568 | uchar scsi_reset_wait; |
1569 | uchar chip_no; |
1570 | char is_in_int; |
1571 | uchar max_total_qng; |
1572 | uchar cur_total_qng; |
1573 | uchar in_critical_cnt; |
1574 | uchar irq_no; |
1575 | uchar last_q_shortage; |
1576 | ushort init_state; |
1577 | uchar cur_dvc_qng[ASC_MAX_TID7 + 1]; |
1578 | uchar max_dvc_qng[ASC_MAX_TID7 + 1]; |
1579 | ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID7 + 1]; |
1580 | ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID7 + 1]; |
1581 | uchar sdtr_period_tbl[ASC_MAX_SYN_XFER_NO16]; |
1582 | ASC_DVC_CFG *cfg; |
1583 | Ptr2Funculong saved_ptr2func; |
1584 | ASC_SCSI_BIT_ID_TYPEuchar pci_fix_asyn_xfer_always; |
1585 | char redo_scam; |
1586 | ushort res2; |
1587 | uchar dos_int13_table[ASC_MAX_TID7 + 1]; |
1588 | ulong max_dma_count; |
1589 | ASC_SCSI_BIT_ID_TYPEuchar no_scam; |
1590 | ASC_SCSI_BIT_ID_TYPEuchar pci_fix_asyn_xfer; |
1591 | uchar max_sdtr_index; |
1592 | uchar host_init_sdtr_index; |
1593 | ulong drv_ptr; |
1594 | ulong uc_break; |
1595 | ulong res7; |
1596 | ulong res8; |
1597 | } ASC_DVC_VAR; |
1598 | |
1599 | typedef int (* ASC_ISR_CALLBACK) (ASC_DVC_VAR asc_ptr_type *, ASC_QDONE_INFO *); |
1600 | typedef int (* ASC_EXE_CALLBACK) (ASC_DVC_VAR asc_ptr_type *, ASC_SCSI_Q *); |
1601 | |
1602 | typedef struct asc_dvc_inq_info { |
1603 | uchar type[ASC_MAX_TID7 + 1][ASC_MAX_LUN7 + 1]; |
1604 | } ASC_DVC_INQ_INFO; |
1605 | |
1606 | typedef struct asc_cap_info { |
1607 | ulong lba; |
1608 | ulong blk_size; |
1609 | } ASC_CAP_INFO; |
1610 | |
1611 | typedef struct asc_cap_info_array { |
1612 | ASC_CAP_INFO cap_info[ASC_MAX_TID7 + 1][ASC_MAX_LUN7 + 1]; |
1613 | } ASC_CAP_INFO_ARRAY; |
1614 | |
1615 | #define ASC_MCNTL_NO_SEL_TIMEOUT(ushort)0x0001 (ushort)0x0001 |
1616 | #define ASC_MCNTL_NULL_TARGET(ushort)0x0002 (ushort)0x0002 |
1617 | #define ASC_CNTL_INITIATOR(ushort)0x0001 (ushort)0x0001 |
1618 | #define ASC_CNTL_BIOS_GT_1GB(ushort)0x0002 (ushort)0x0002 |
1619 | #define ASC_CNTL_BIOS_GT_2_DISK(ushort)0x0004 (ushort)0x0004 |
1620 | #define ASC_CNTL_BIOS_REMOVABLE(ushort)0x0008 (ushort)0x0008 |
1621 | #define ASC_CNTL_NO_SCAM(ushort)0x0010 (ushort)0x0010 |
1622 | #define ASC_CNTL_INT_MULTI_Q(ushort)0x0080 (ushort)0x0080 |
1623 | #define ASC_CNTL_NO_LUN_SUPPORT(ushort)0x0040 (ushort)0x0040 |
1624 | #define ASC_CNTL_NO_VERIFY_COPY(ushort)0x0100 (ushort)0x0100 |
1625 | #define ASC_CNTL_RESET_SCSI(ushort)0x0200 (ushort)0x0200 |
1626 | #define ASC_CNTL_INIT_INQUIRY(ushort)0x0400 (ushort)0x0400 |
1627 | #define ASC_CNTL_INIT_VERBOSE(ushort)0x0800 (ushort)0x0800 |
1628 | #define ASC_CNTL_SCSI_PARITY(ushort)0x1000 (ushort)0x1000 |
1629 | #define ASC_CNTL_BURST_MODE(ushort)0x2000 (ushort)0x2000 |
1630 | #define ASC_CNTL_SDTR_ENABLE_ULTRA(ushort)0x4000 (ushort)0x4000 |
1631 | #define ASC_EEP_DVC_CFG_BEG_VL2 2 |
1632 | #define ASC_EEP_MAX_DVC_ADDR_VL15 15 |
1633 | #define ASC_EEP_DVC_CFG_BEG32 32 |
1634 | #define ASC_EEP_MAX_DVC_ADDR45 45 |
1635 | #define ASC_EEP_DEFINED_WORDS10 10 |
1636 | #define ASC_EEP_MAX_ADDR63 63 |
1637 | #define ASC_EEP_RES_WORDS0 0 |
1638 | #define ASC_EEP_MAX_RETRY20 20 |
1639 | #define ASC_MAX_INIT_BUSY_RETRY8 8 |
1640 | #define ASC_EEP_ISA_PNP_WSIZE16 16 |
1641 | |
1642 | typedef struct asceep_config { |
1643 | ushort cfg_lsw; |
1644 | ushort cfg_msw; |
1645 | uchar init_sdtr; |
1646 | uchar disc_enable; |
1647 | uchar use_cmd_qng; |
1648 | uchar start_motor; |
1649 | uchar max_total_qng; |
1650 | uchar max_tag_qng; |
1651 | uchar bios_scan; |
1652 | uchar power_up_wait; |
1653 | uchar no_scam; |
1654 | uchar chip_scsi_id:4; |
1655 | uchar isa_dma_speed:4; |
1656 | uchar dos_int13_table[ASC_MAX_TID7 + 1]; |
1657 | uchar adapter_info[6]; |
1658 | ushort cntl; |
1659 | ushort chksum; |
1660 | } ASCEEP_CONFIG; |
1661 | |
1662 | #define ASC_PCI_CFG_LSW_SCSI_PARITY0x0800 0x0800 |
1663 | #define ASC_PCI_CFG_LSW_BURST_MODE0x0080 0x0080 |
1664 | #define ASC_PCI_CFG_LSW_INTR_ABLE0x0020 0x0020 |
1665 | |
1666 | #define ASC_EEP_CMD_READ0x80 0x80 |
1667 | #define ASC_EEP_CMD_WRITE0x40 0x40 |
1668 | #define ASC_EEP_CMD_WRITE_ABLE0x30 0x30 |
1669 | #define ASC_EEP_CMD_WRITE_DISABLE0x00 0x00 |
1670 | #define ASC_OVERRUN_BSIZE0x00000048UL 0x00000048UL |
1671 | #define ASC_CTRL_BREAK_ONCE0x0001 0x0001 |
1672 | #define ASC_CTRL_BREAK_STAY_IDLE0x0002 0x0002 |
1673 | #define ASCV_MSGOUT_BEG0x0000 0x0000 |
1674 | #define ASCV_MSGOUT_SDTR_PERIOD(0x0000 +3) (ASCV_MSGOUT_BEG0x0000+3) |
1675 | #define ASCV_MSGOUT_SDTR_OFFSET(0x0000 +4) (ASCV_MSGOUT_BEG0x0000+4) |
1676 | #define ASCV_BREAK_SAVED_CODE(ushort)0x0006 (ushort)0x0006 |
1677 | #define ASCV_MSGIN_BEG(0x0000 +8) (ASCV_MSGOUT_BEG0x0000+8) |
1678 | #define ASCV_MSGIN_SDTR_PERIOD((0x0000 +8)+3) (ASCV_MSGIN_BEG(0x0000 +8)+3) |
1679 | #define ASCV_MSGIN_SDTR_OFFSET((0x0000 +8)+4) (ASCV_MSGIN_BEG(0x0000 +8)+4) |
1680 | #define ASCV_SDTR_DATA_BEG((0x0000 +8)+8) (ASCV_MSGIN_BEG(0x0000 +8)+8) |
1681 | #define ASCV_SDTR_DONE_BEG(((0x0000 +8)+8)+8) (ASCV_SDTR_DATA_BEG((0x0000 +8)+8)+8) |
1682 | #define ASCV_MAX_DVC_QNG_BEG(ushort)0x0020 (ushort)0x0020 |
1683 | #define ASCV_BREAK_ADDR(ushort)0x0028 (ushort)0x0028 |
1684 | #define ASCV_BREAK_NOTIFY_COUNT(ushort)0x002A (ushort)0x002A |
1685 | #define ASCV_BREAK_CONTROL(ushort)0x002C (ushort)0x002C |
1686 | #define ASCV_BREAK_HIT_COUNT(ushort)0x002E (ushort)0x002E |
1687 | |
1688 | #define ASCV_ASCDVC_ERR_CODE_W(ushort)0x0030 (ushort)0x0030 |
1689 | #define ASCV_MCODE_CHKSUM_W(ushort)0x0032 (ushort)0x0032 |
1690 | #define ASCV_MCODE_SIZE_W(ushort)0x0034 (ushort)0x0034 |
1691 | #define ASCV_STOP_CODE_B(ushort)0x0036 (ushort)0x0036 |
1692 | #define ASCV_DVC_ERR_CODE_B(ushort)0x0037 (ushort)0x0037 |
1693 | #define ASCV_OVERRUN_PADDR_D(ushort)0x0038 (ushort)0x0038 |
1694 | #define ASCV_OVERRUN_BSIZE_D(ushort)0x003C (ushort)0x003C |
1695 | #define ASCV_HALTCODE_W(ushort)0x0040 (ushort)0x0040 |
1696 | #define ASCV_CHKSUM_W(ushort)0x0042 (ushort)0x0042 |
1697 | #define ASCV_MC_DATE_W(ushort)0x0044 (ushort)0x0044 |
1698 | #define ASCV_MC_VER_W(ushort)0x0046 (ushort)0x0046 |
1699 | #define ASCV_NEXTRDY_B(ushort)0x0048 (ushort)0x0048 |
1700 | #define ASCV_DONENEXT_B(ushort)0x0049 (ushort)0x0049 |
1701 | #define ASCV_USE_TAGGED_QNG_B(ushort)0x004A (ushort)0x004A |
1702 | #define ASCV_SCSIBUSY_B(ushort)0x004B (ushort)0x004B |
1703 | #define ASCV_Q_DONE_IN_PROGRESS_B(ushort)0x004C (ushort)0x004C |
1704 | #define ASCV_CURCDB_B(ushort)0x004D (ushort)0x004D |
1705 | #define ASCV_RCLUN_B(ushort)0x004E (ushort)0x004E |
1706 | #define ASCV_BUSY_QHEAD_B(ushort)0x004F (ushort)0x004F |
1707 | #define ASCV_DISC1_QHEAD_B(ushort)0x0050 (ushort)0x0050 |
1708 | #define ASCV_DISC_ENABLE_B(ushort)0x0052 (ushort)0x0052 |
1709 | #define ASCV_CAN_TAGGED_QNG_B(ushort)0x0053 (ushort)0x0053 |
1710 | #define ASCV_HOSTSCSI_ID_B(ushort)0x0055 (ushort)0x0055 |
1711 | #define ASCV_MCODE_CNTL_B(ushort)0x0056 (ushort)0x0056 |
1712 | #define ASCV_NULL_TARGET_B(ushort)0x0057 (ushort)0x0057 |
1713 | #define ASCV_FREE_Q_HEAD_W(ushort)0x0058 (ushort)0x0058 |
1714 | #define ASCV_DONE_Q_TAIL_W(ushort)0x005A (ushort)0x005A |
1715 | #define ASCV_FREE_Q_HEAD_B(ushort)((ushort)0x0058 +1) (ushort)(ASCV_FREE_Q_HEAD_W(ushort)0x0058+1) |
1716 | #define ASCV_DONE_Q_TAIL_B(ushort)((ushort)0x005A +1) (ushort)(ASCV_DONE_Q_TAIL_W(ushort)0x005A+1) |
1717 | #define ASCV_HOST_FLAG_B(ushort)0x005D (ushort)0x005D |
1718 | #define ASCV_TOTAL_READY_Q_B(ushort)0x0064 (ushort)0x0064 |
1719 | #define ASCV_VER_SERIAL_B(ushort)0x0065 (ushort)0x0065 |
1720 | #define ASCV_HALTCODE_SAVED_W(ushort)0x0066 (ushort)0x0066 |
1721 | #define ASCV_WTM_FLAG_B(ushort)0x0068 (ushort)0x0068 |
1722 | #define ASCV_RISC_FLAG_B(ushort)0x006A (ushort)0x006A |
1723 | #define ASCV_REQ_SG_LIST_QP(ushort)0x006B (ushort)0x006B |
1724 | #define ASC_HOST_FLAG_IN_ISR0x01 0x01 |
1725 | #define ASC_HOST_FLAG_ACK_INT0x02 0x02 |
1726 | #define ASC_RISC_FLAG_GEN_INT0x01 0x01 |
1727 | #define ASC_RISC_FLAG_REQ_SG_LIST0x02 0x02 |
1728 | #define IOP_CTRL(0x0F) (0x0F) |
1729 | #define IOP_STATUS(0x0E) (0x0E) |
1730 | #define IOP_INT_ACK(0x0E) IOP_STATUS(0x0E) |
1731 | #define IOP_REG_IFC(0x0D) (0x0D) |
1732 | #define IOP_SYN_OFFSET(0x0B) (0x0B) |
1733 | #define IOP_EXTRA_CONTROL(0x0D) (0x0D) |
1734 | #define IOP_REG_PC(0x0C) (0x0C) |
1735 | #define IOP_RAM_ADDR(0x0A) (0x0A) |
1736 | #define IOP_RAM_DATA(0x08) (0x08) |
1737 | #define IOP_EEP_DATA(0x06) (0x06) |
1738 | #define IOP_EEP_CMD(0x07) (0x07) |
1739 | #define IOP_VERSION(0x03) (0x03) |
1740 | #define IOP_CONFIG_HIGH(0x04) (0x04) |
1741 | #define IOP_CONFIG_LOW(0x02) (0x02) |
1742 | #define IOP_SIG_BYTE(0x01) (0x01) |
1743 | #define IOP_SIG_WORD(0x00) (0x00) |
1744 | #define IOP_REG_DC1(0x0E) (0x0E) |
1745 | #define IOP_REG_DC0(0x0C) (0x0C) |
1746 | #define IOP_REG_SB(0x0B) (0x0B) |
1747 | #define IOP_REG_DA1(0x0A) (0x0A) |
1748 | #define IOP_REG_DA0(0x08) (0x08) |
1749 | #define IOP_REG_SC(0x09) (0x09) |
1750 | #define IOP_DMA_SPEED(0x07) (0x07) |
1751 | #define IOP_REG_FLAG(0x07) (0x07) |
1752 | #define IOP_FIFO_H(0x06) (0x06) |
1753 | #define IOP_FIFO_L(0x04) (0x04) |
1754 | #define IOP_REG_ID(0x05) (0x05) |
1755 | #define IOP_REG_QP(0x03) (0x03) |
1756 | #define IOP_REG_IH(0x02) (0x02) |
1757 | #define IOP_REG_IX(0x01) (0x01) |
1758 | #define IOP_REG_AX(0x00) (0x00) |
1759 | #define IFC_REG_LOCK(0x00) (0x00) |
1760 | #define IFC_REG_UNLOCK(0x09) (0x09) |
1761 | #define IFC_WR_EN_FILTER(0x10) (0x10) |
1762 | #define IFC_RD_NO_EEPROM(0x10) (0x10) |
1763 | #define IFC_SLEW_RATE(0x20) (0x20) |
1764 | #define IFC_ACT_NEG(0x40) (0x40) |
1765 | #define IFC_INP_FILTER(0x80) (0x80) |
1766 | #define IFC_INIT_DEFAULT((0x40) | (0x09)) (IFC_ACT_NEG(0x40) | IFC_REG_UNLOCK(0x09)) |
1767 | #define SC_SEL(uchar)(0x80) (uchar)(0x80) |
1768 | #define SC_BSY(uchar)(0x40) (uchar)(0x40) |
1769 | #define SC_ACK(uchar)(0x20) (uchar)(0x20) |
1770 | #define SC_REQ(uchar)(0x10) (uchar)(0x10) |
1771 | #define SC_ATN(uchar)(0x08) (uchar)(0x08) |
1772 | #define SC_IO(uchar)(0x04) (uchar)(0x04) |
1773 | #define SC_CD(uchar)(0x02) (uchar)(0x02) |
1774 | #define SC_MSG(uchar)(0x01) (uchar)(0x01) |
1775 | #define SEC_SCSI_CTL(uchar)(0x80) (uchar)(0x80) |
1776 | #define SEC_ACTIVE_NEGATE(uchar)(0x40) (uchar)(0x40) |
1777 | #define SEC_SLEW_RATE(uchar)(0x20) (uchar)(0x20) |
1778 | #define SEC_ENABLE_FILTER(uchar)(0x10) (uchar)(0x10) |
1779 | #define ASC_HALT_EXTMSG_IN(ushort)0x8000 (ushort)0x8000 |
1780 | #define ASC_HALT_CHK_CONDITION(ushort)0x8100 (ushort)0x8100 |
1781 | #define ASC_HALT_SS_QUEUE_FULL(ushort)0x8200 (ushort)0x8200 |
1782 | #define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX(ushort)0x8300 (ushort)0x8300 |
1783 | #define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX(ushort)0x8400 (ushort)0x8400 |
1784 | #define ASC_HALT_SDTR_REJECTED(ushort)0x4000 (ushort)0x4000 |
1785 | #define ASC_MAX_QNO0xF8 0xF8 |
1786 | #define ASC_DATA_SEC_BEG(ushort)0x0080 (ushort)0x0080 |
1787 | #define ASC_DATA_SEC_END(ushort)0x0080 (ushort)0x0080 |
1788 | #define ASC_CODE_SEC_BEG(ushort)0x0080 (ushort)0x0080 |
1789 | #define ASC_CODE_SEC_END(ushort)0x0080 (ushort)0x0080 |
1790 | #define ASC_QADR_BEG(0x4000) (0x4000) |
1791 | #define ASC_QADR_USED(ushort)(0xF8 * 64) (ushort)(ASC_MAX_QNO0xF8 * 64) |
1792 | #define ASC_QADR_END(ushort)0x7FFF (ushort)0x7FFF |
1793 | #define ASC_QLAST_ADR(ushort)0x7FC0 (ushort)0x7FC0 |
1794 | #define ASC_QBLK_SIZE0x40 0x40 |
1795 | #define ASC_BIOS_DATA_QBEG0xF8 0xF8 |
1796 | #define ASC_MIN_ACTIVE_QNO0x01 0x01 |
1797 | #define ASC_QLINK_END0xFF 0xFF |
1798 | #define ASC_EEPROM_WORDS0x10 0x10 |
1799 | #define ASC_MAX_MGS_LEN0x10 0x10 |
1800 | #define ASC_BIOS_ADDR_DEF0xDC00 0xDC00 |
1801 | #define ASC_BIOS_SIZE0x3800 0x3800 |
1802 | #define ASC_BIOS_RAM_OFF0x3800 0x3800 |
1803 | #define ASC_BIOS_RAM_SIZE0x800 0x800 |
1804 | #define ASC_BIOS_MIN_ADDR0xC000 0xC000 |
1805 | #define ASC_BIOS_MAX_ADDR0xEC00 0xEC00 |
1806 | #define ASC_BIOS_BANK_SIZE0x0400 0x0400 |
1807 | #define ASC_MCODE_START_ADDR0x0080 0x0080 |
1808 | #define ASC_CFG0_HOST_INT_ON0x0020 0x0020 |
1809 | #define ASC_CFG0_BIOS_ON0x0040 0x0040 |
1810 | #define ASC_CFG0_VERA_BURST_ON0x0080 0x0080 |
1811 | #define ASC_CFG0_SCSI_PARITY_ON0x0800 0x0800 |
1812 | #define ASC_CFG1_SCSI_TARGET_ON0x0080 0x0080 |
1813 | #define ASC_CFG1_LRAM_8BITS_ON0x0800 0x0800 |
1814 | #define ASC_CFG_MSW_CLR_MASK0x3080 0x3080 |
1815 | #define CSW_TEST1(unsigned short)0x8000 (ASC_CS_TYPEunsigned short)0x8000 |
1816 | #define CSW_AUTO_CONFIG(unsigned short)0x4000 (ASC_CS_TYPEunsigned short)0x4000 |
1817 | #define CSW_RESERVED1(unsigned short)0x2000 (ASC_CS_TYPEunsigned short)0x2000 |
1818 | #define CSW_IRQ_WRITTEN(unsigned short)0x1000 (ASC_CS_TYPEunsigned short)0x1000 |
1819 | #define CSW_33MHZ_SELECTED(unsigned short)0x0800 (ASC_CS_TYPEunsigned short)0x0800 |
1820 | #define CSW_TEST2(unsigned short)0x0400 (ASC_CS_TYPEunsigned short)0x0400 |
1821 | #define CSW_TEST3(unsigned short)0x0200 (ASC_CS_TYPEunsigned short)0x0200 |
1822 | #define CSW_RESERVED2(unsigned short)0x0100 (ASC_CS_TYPEunsigned short)0x0100 |
1823 | #define CSW_DMA_DONE(unsigned short)0x0080 (ASC_CS_TYPEunsigned short)0x0080 |
1824 | #define CSW_FIFO_RDY(unsigned short)0x0040 (ASC_CS_TYPEunsigned short)0x0040 |
1825 | #define CSW_EEP_READ_DONE(unsigned short)0x0020 (ASC_CS_TYPEunsigned short)0x0020 |
1826 | #define CSW_HALTED(unsigned short)0x0010 (ASC_CS_TYPEunsigned short)0x0010 |
1827 | #define CSW_SCSI_RESET_ACTIVE(unsigned short)0x0008 (ASC_CS_TYPEunsigned short)0x0008 |
1828 | #define CSW_PARITY_ERR(unsigned short)0x0004 (ASC_CS_TYPEunsigned short)0x0004 |
1829 | #define CSW_SCSI_RESET_LATCH(unsigned short)0x0002 (ASC_CS_TYPEunsigned short)0x0002 |
1830 | #define CSW_INT_PENDING(unsigned short)0x0001 (ASC_CS_TYPEunsigned short)0x0001 |
1831 | #define CIW_CLR_SCSI_RESET_INT(unsigned short)0x1000 (ASC_CS_TYPEunsigned short)0x1000 |
1832 | #define CIW_INT_ACK(unsigned short)0x0100 (ASC_CS_TYPEunsigned short)0x0100 |
1833 | #define CIW_TEST1(unsigned short)0x0200 (ASC_CS_TYPEunsigned short)0x0200 |
1834 | #define CIW_TEST2(unsigned short)0x0400 (ASC_CS_TYPEunsigned short)0x0400 |
1835 | #define CIW_SEL_33MHZ(unsigned short)0x0800 (ASC_CS_TYPEunsigned short)0x0800 |
1836 | #define CIW_IRQ_ACT(unsigned short)0x1000 (ASC_CS_TYPEunsigned short)0x1000 |
1837 | #define CC_CHIP_RESET(uchar)0x80 (uchar)0x80 |
1838 | #define CC_SCSI_RESET(uchar)0x40 (uchar)0x40 |
1839 | #define CC_HALT(uchar)0x20 (uchar)0x20 |
1840 | #define CC_SINGLE_STEP(uchar)0x10 (uchar)0x10 |
1841 | #define CC_DMA_ABLE(uchar)0x08 (uchar)0x08 |
1842 | #define CC_TEST(uchar)0x04 (uchar)0x04 |
1843 | #define CC_BANK_ONE(uchar)0x02 (uchar)0x02 |
1844 | #define CC_DIAG(uchar)0x01 (uchar)0x01 |
1845 | #define ASC_1000_ID0W0x04C1 0x04C1 |
1846 | #define ASC_1000_ID0W_FIX0x00C1 0x00C1 |
1847 | #define ASC_1000_ID1B0x25 0x25 |
1848 | #define ASC_EISA_BIG_IOP_GAP(0x1C30 -0x0C50) (0x1C30-0x0C50) |
1849 | #define ASC_EISA_SMALL_IOP_GAP(0x0020) (0x0020) |
1850 | #define ASC_EISA_MIN_IOP_ADDR(0x0C30) (0x0C30) |
1851 | #define ASC_EISA_MAX_IOP_ADDR(0xFC50) (0xFC50) |
1852 | #define ASC_EISA_REV_IOP_MASK(0x0C83) (0x0C83) |
1853 | #define ASC_EISA_PID_IOP_MASK(0x0C80) (0x0C80) |
1854 | #define ASC_EISA_CFG_IOP_MASK(0x0C86) (0x0C86) |
1855 | #define ASC_GET_EISA_SLOT(iop)(unsigned short)((iop) & 0xF000) (PortAddrunsigned short)((iop) & 0xF000) |
1856 | #define ASC_EISA_ID_7400x01745004UL 0x01745004UL |
1857 | #define ASC_EISA_ID_7500x01755004UL 0x01755004UL |
1858 | #define INS_HALTINT(ushort)0x6281 (ushort)0x6281 |
1859 | #define INS_HALT(ushort)0x6280 (ushort)0x6280 |
1860 | #define INS_SINT(ushort)0x6200 (ushort)0x6200 |
1861 | #define INS_RFLAG_WTM(ushort)0x7380 (ushort)0x7380 |
1862 | #define ASC_MC_SAVE_CODE_WSIZE0x500 0x500 |
1863 | #define ASC_MC_SAVE_DATA_WSIZE0x40 0x40 |
1864 | |
1865 | typedef struct asc_mc_saved { |
1866 | ushort data[ASC_MC_SAVE_DATA_WSIZE0x40]; |
1867 | ushort code[ASC_MC_SAVE_CODE_WSIZE0x500]; |
1868 | } ASC_MC_SAVED; |
1869 | |
1870 | #define AscGetQDoneInProgress(port)AscReadLramByte((port), (ushort)0x004C) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B(ushort)0x004C) |
1871 | #define AscPutQDoneInProgress(port, val)AscWriteLramByte((port), (ushort)0x004C, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B(ushort)0x004C, val) |
1872 | #define AscGetVarFreeQHead(port)AscReadLramWord((port), (ushort)0x0058) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W(ushort)0x0058) |
1873 | #define AscGetVarDoneQTail(port)AscReadLramWord((port), (ushort)0x005A) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W(ushort)0x005A) |
1874 | #define AscPutVarFreeQHead(port, val)AscWriteLramWord((port), (ushort)0x0058, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W(ushort)0x0058, val) |
1875 | #define AscPutVarDoneQTail(port, val)AscWriteLramWord((port), (ushort)0x005A, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W(ushort)0x005A, val) |
1876 | #define AscGetRiscVarFreeQHead(port)AscReadLramByte((port), (ushort)0x0048) AscReadLramByte((port), ASCV_NEXTRDY_B(ushort)0x0048) |
1877 | #define AscGetRiscVarDoneQTail(port)AscReadLramByte((port), (ushort)0x0049) AscReadLramByte((port), ASCV_DONENEXT_B(ushort)0x0049) |
1878 | #define AscPutRiscVarFreeQHead(port, val)AscWriteLramByte((port), (ushort)0x0048, val) AscWriteLramByte((port), ASCV_NEXTRDY_B(ushort)0x0048, val) |
1879 | #define AscPutRiscVarDoneQTail(port, val)AscWriteLramByte((port), (ushort)0x0049, val) AscWriteLramByte((port), ASCV_DONENEXT_B(ushort)0x0049, val) |
1880 | #define AscPutMCodeSDTRDoneAtID(port, id, data)AscWriteLramByte((port), (ushort)((ushort)(((0x0000 +8)+8)+8) +(ushort)id), (data)) ; AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG(((0x0000 +8)+8)+8)+(ushort)id), (data)) ; |
1881 | #define AscGetMCodeSDTRDoneAtID(port, id)AscReadLramByte((port), (ushort)((ushort)(((0x0000 +8)+8)+8)+ (ushort)id)) ; AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG(((0x0000 +8)+8)+8)+(ushort)id)) ; |
1882 | #define AscPutMCodeInitSDTRAtID(port, id, data)AscWriteLramByte((port), (ushort)((ushort)((0x0000 +8)+8)+(ushort )id), data) ; AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG((0x0000 +8)+8)+(ushort)id), data) ; |
1883 | #define AscGetMCodeInitSDTRAtID(port, id)AscReadLramByte((port), (ushort)((ushort)((0x0000 +8)+8)+(ushort )id)) ; AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG((0x0000 +8)+8)+(ushort)id)) ; |
1884 | #define AscSynIndexToPeriod(index)(uchar)(asc_dvc->sdtr_period_tbl[ (index) ]) (uchar)(asc_dvc->sdtr_period_tbl[ (index) ]) |
1885 | #define AscGetChipSignatureByte(port)(uchar)((__builtin_constant_p(((port)+(0x01))) && ((port )+(0x01)) < 256) ? __inbc((port)+(0x01)) : __inb((port)+(0x01 ))) (uchar)inp((port)+IOP_SIG_BYTE)((__builtin_constant_p(((port)+(0x01))) && ((port)+(0x01 )) < 256) ? __inbc((port)+(0x01)) : __inb((port)+(0x01))) |
1886 | #define AscGetChipSignatureWord(port)(ushort)((__builtin_constant_p(((port)+(0x00))) && (( port)+(0x00)) < 256) ? __inwc((port)+(0x00)) : __inw((port )+(0x00))) (ushort)inpw((port)+IOP_SIG_WORD)((__builtin_constant_p(((port)+(0x00))) && ((port)+(0x00 )) < 256) ? __inwc((port)+(0x00)) : __inw((port)+(0x00))) |
1887 | #define AscGetChipVerNo(port)(uchar)((__builtin_constant_p(((port)+(0x03))) && ((port )+(0x03)) < 256) ? __inbc((port)+(0x03)) : __inb((port)+(0x03 ))) (uchar)inp((port)+IOP_VERSION)((__builtin_constant_p(((port)+(0x03))) && ((port)+(0x03 )) < 256) ? __inbc((port)+(0x03)) : __inb((port)+(0x03))) |
1888 | #define AscGetChipCfgLsw(port)(ushort)((__builtin_constant_p(((port)+(0x02))) && (( port)+(0x02)) < 256) ? __inwc((port)+(0x02)) : __inw((port )+(0x02))) (ushort)inpw((port)+IOP_CONFIG_LOW)((__builtin_constant_p(((port)+(0x02))) && ((port)+(0x02 )) < 256) ? __inwc((port)+(0x02)) : __inw((port)+(0x02))) |
1889 | #define AscGetChipCfgMsw(port)(ushort)((__builtin_constant_p(((port)+(0x04))) && (( port)+(0x04)) < 256) ? __inwc((port)+(0x04)) : __inw((port )+(0x04))) (ushort)inpw((port)+IOP_CONFIG_HIGH)((__builtin_constant_p(((port)+(0x04))) && ((port)+(0x04 )) < 256) ? __inwc((port)+(0x04)) : __inw((port)+(0x04))) |
1890 | #define AscSetChipCfgLsw(port, data)((__builtin_constant_p((((port)+(0x02)))) && (((port) +(0x02))) < 256) ? __outwc(((data)),(((port)+(0x02)))) : __outw (((data)),(((port)+(0x02))))) outpw((port)+IOP_CONFIG_LOW, data)((__builtin_constant_p((((port)+(0x02)))) && (((port) +(0x02))) < 256) ? __outwc(((data)),(((port)+(0x02)))) : __outw (((data)),(((port)+(0x02))))) |
1891 | #define AscSetChipCfgMsw(port, data)((__builtin_constant_p((((port)+(0x04)))) && (((port) +(0x04))) < 256) ? __outwc(((data)),(((port)+(0x04)))) : __outw (((data)),(((port)+(0x04))))) outpw((port)+IOP_CONFIG_HIGH, data)((__builtin_constant_p((((port)+(0x04)))) && (((port) +(0x04))) < 256) ? __outwc(((data)),(((port)+(0x04)))) : __outw (((data)),(((port)+(0x04))))) |
1892 | #define AscGetChipEEPCmd(port)(uchar)((__builtin_constant_p(((port)+(0x07))) && ((port )+(0x07)) < 256) ? __inbc((port)+(0x07)) : __inb((port)+(0x07 ))) (uchar)inp((port)+IOP_EEP_CMD)((__builtin_constant_p(((port)+(0x07))) && ((port)+(0x07 )) < 256) ? __inbc((port)+(0x07)) : __inb((port)+(0x07))) |
1893 | #define AscSetChipEEPCmd(port, data)((__builtin_constant_p((((port)+(0x07)))) && (((port) +(0x07))) < 256) ? __outbc(((data)),(((port)+(0x07)))) : __outb (((data)),(((port)+(0x07))))) outp((port)+IOP_EEP_CMD, data)((__builtin_constant_p((((port)+(0x07)))) && (((port) +(0x07))) < 256) ? __outbc(((data)),(((port)+(0x07)))) : __outb (((data)),(((port)+(0x07))))) |
1894 | #define AscGetChipEEPData(port)(ushort)((__builtin_constant_p(((port)+(0x06))) && (( port)+(0x06)) < 256) ? __inwc((port)+(0x06)) : __inw((port )+(0x06))) (ushort)inpw((port)+IOP_EEP_DATA)((__builtin_constant_p(((port)+(0x06))) && ((port)+(0x06 )) < 256) ? __inwc((port)+(0x06)) : __inw((port)+(0x06))) |
1895 | #define AscSetChipEEPData(port, data)((__builtin_constant_p((((port)+(0x06)))) && (((port) +(0x06))) < 256) ? __outwc(((data)),(((port)+(0x06)))) : __outw (((data)),(((port)+(0x06))))) outpw((port)+IOP_EEP_DATA, data)((__builtin_constant_p((((port)+(0x06)))) && (((port) +(0x06))) < 256) ? __outwc(((data)),(((port)+(0x06)))) : __outw (((data)),(((port)+(0x06))))) |
1896 | #define AscGetChipLramAddr(port)(ushort)((__builtin_constant_p(((unsigned short)((port)+(0x0A )))) && ((unsigned short)((port)+(0x0A))) < 256) ? __inwc((unsigned short)((port)+(0x0A))) : __inw((unsigned short )((port)+(0x0A)))) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR))((__builtin_constant_p(((unsigned short)((port)+(0x0A)))) && ((unsigned short)((port)+(0x0A))) < 256) ? __inwc((unsigned short)((port)+(0x0A))) : __inw((unsigned short)((port)+(0x0A )))) |
1897 | #define AscSetChipLramAddr(port, addr)((__builtin_constant_p((((unsigned short)((port)+(0x0A))))) && (((unsigned short)((port)+(0x0A)))) < 256) ? __outwc(((addr )),(((unsigned short)((port)+(0x0A))))) : __outw(((addr)),((( unsigned short)((port)+(0x0A)))))) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr)((__builtin_constant_p((((unsigned short)((port)+(0x0A))))) && (((unsigned short)((port)+(0x0A)))) < 256) ? __outwc(((addr )),(((unsigned short)((port)+(0x0A))))) : __outw(((addr)),((( unsigned short)((port)+(0x0A)))))) |
1898 | #define AscGetChipLramData(port)(ushort)((__builtin_constant_p(((port)+(0x08))) && (( port)+(0x08)) < 256) ? __inwc((port)+(0x08)) : __inw((port )+(0x08))) (ushort)inpw((port)+IOP_RAM_DATA)((__builtin_constant_p(((port)+(0x08))) && ((port)+(0x08 )) < 256) ? __inwc((port)+(0x08)) : __inw((port)+(0x08))) |
1899 | #define AscSetChipLramData(port, data)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) outpw((port)+IOP_RAM_DATA, data)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) |
1900 | #define AscGetChipLramDataNoSwap(port)(ushort)((__builtin_constant_p(((port)+(0x08))) && (( port)+(0x08)) < 256) ? __inwc((port)+(0x08)) : __inw((port )+(0x08))) (ushort)inpw_noswap((port)+IOP_RAM_DATA)((__builtin_constant_p(((port)+(0x08))) && ((port)+(0x08 )) < 256) ? __inwc((port)+(0x08)) : __inw((port)+(0x08))) |
1901 | #define AscSetChipLramDataNoSwap(port, data)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) outpw_noswap((port)+IOP_RAM_DATA, data)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) |
1902 | #define AscGetChipIFC(port)(uchar)((__builtin_constant_p(((port)+(0x0D))) && ((port )+(0x0D)) < 256) ? __inbc((port)+(0x0D)) : __inb((port)+(0x0D ))) (uchar)inp((port)+IOP_REG_IFC)((__builtin_constant_p(((port)+(0x0D))) && ((port)+(0x0D )) < 256) ? __inbc((port)+(0x0D)) : __inb((port)+(0x0D))) |
1903 | #define AscSetChipIFC(port, data)((__builtin_constant_p((((port)+(0x0D)))) && (((port) +(0x0D))) < 256) ? __outbc(((data)),(((port)+(0x0D)))) : __outb (((data)),(((port)+(0x0D))))) outp((port)+IOP_REG_IFC, data)((__builtin_constant_p((((port)+(0x0D)))) && (((port) +(0x0D))) < 256) ? __outbc(((data)),(((port)+(0x0D)))) : __outb (((data)),(((port)+(0x0D))))) |
1904 | #define AscGetChipStatus(port)(unsigned short)((__builtin_constant_p(((port)+(0x0E))) && ((port)+(0x0E)) < 256) ? __inwc((port)+(0x0E)) : __inw((port )+(0x0E))) (ASC_CS_TYPEunsigned short)inpw((port)+IOP_STATUS)((__builtin_constant_p(((port)+(0x0E))) && ((port)+(0x0E )) < 256) ? __inwc((port)+(0x0E)) : __inw((port)+(0x0E))) |
1905 | #define AscSetChipStatus(port, cs_val)((__builtin_constant_p((((port)+(0x0E)))) && (((port) +(0x0E))) < 256) ? __outwc(((cs_val)),(((port)+(0x0E)))) : __outw(((cs_val)),(((port)+(0x0E))))) outpw((port)+IOP_STATUS, cs_val)((__builtin_constant_p((((port)+(0x0E)))) && (((port) +(0x0E))) < 256) ? __outwc(((cs_val)),(((port)+(0x0E)))) : __outw(((cs_val)),(((port)+(0x0E))))) |
1906 | #define AscGetChipControl(port)(uchar)((__builtin_constant_p(((port)+(0x0F))) && ((port )+(0x0F)) < 256) ? __inbc((port)+(0x0F)) : __inb((port)+(0x0F ))) (uchar)inp((port)+IOP_CTRL)((__builtin_constant_p(((port)+(0x0F))) && ((port)+(0x0F )) < 256) ? __inbc((port)+(0x0F)) : __inb((port)+(0x0F))) |
1907 | #define AscSetChipControl(port, cc_val)((__builtin_constant_p((((port)+(0x0F)))) && (((port) +(0x0F))) < 256) ? __outbc(((cc_val)),(((port)+(0x0F)))) : __outb(((cc_val)),(((port)+(0x0F))))) outp((port)+IOP_CTRL, cc_val)((__builtin_constant_p((((port)+(0x0F)))) && (((port) +(0x0F))) < 256) ? __outbc(((cc_val)),(((port)+(0x0F)))) : __outb(((cc_val)),(((port)+(0x0F))))) |
1908 | #define AscGetChipSyn(port)(uchar)((__builtin_constant_p(((port)+(0x0B))) && ((port )+(0x0B)) < 256) ? __inbc((port)+(0x0B)) : __inb((port)+(0x0B ))) (uchar)inp((port)+IOP_SYN_OFFSET)((__builtin_constant_p(((port)+(0x0B))) && ((port)+(0x0B )) < 256) ? __inbc((port)+(0x0B)) : __inb((port)+(0x0B))) |
1909 | #define AscSetChipSyn(port, data)((__builtin_constant_p((((port)+(0x0B)))) && (((port) +(0x0B))) < 256) ? __outbc(((data)),(((port)+(0x0B)))) : __outb (((data)),(((port)+(0x0B))))) outp((port)+IOP_SYN_OFFSET, data)((__builtin_constant_p((((port)+(0x0B)))) && (((port) +(0x0B))) < 256) ? __outbc(((data)),(((port)+(0x0B)))) : __outb (((data)),(((port)+(0x0B))))) |
1910 | #define AscSetPCAddr(port, data)((__builtin_constant_p((((port)+(0x0C)))) && (((port) +(0x0C))) < 256) ? __outwc(((data)),(((port)+(0x0C)))) : __outw (((data)),(((port)+(0x0C))))) outpw((port)+IOP_REG_PC, data)((__builtin_constant_p((((port)+(0x0C)))) && (((port) +(0x0C))) < 256) ? __outwc(((data)),(((port)+(0x0C)))) : __outw (((data)),(((port)+(0x0C))))) |
1911 | #define AscGetPCAddr(port)(ushort)((__builtin_constant_p(((port)+(0x0C))) && (( port)+(0x0C)) < 256) ? __inwc((port)+(0x0C)) : __inw((port )+(0x0C))) (ushort)inpw((port)+IOP_REG_PC)((__builtin_constant_p(((port)+(0x0C))) && ((port)+(0x0C )) < 256) ? __inwc((port)+(0x0C)) : __inw((port)+(0x0C))) |
1912 | #define AscIsIntPending(port)((unsigned short)((__builtin_constant_p(((port)+(0x0E))) && ((port)+(0x0E)) < 256) ? __inwc((port)+(0x0E)) : __inw((port )+(0x0E))) & ((unsigned short)0x0001 | (unsigned short)0x0002 )) (AscGetChipStatus(port)(unsigned short)((__builtin_constant_p(((port)+(0x0E))) && ((port)+(0x0E)) < 256) ? __inwc((port)+(0x0E)) : __inw((port )+(0x0E))) & (CSW_INT_PENDING(unsigned short)0x0001 | CSW_SCSI_RESET_LATCH(unsigned short)0x0002)) |
1913 | #define AscGetChipScsiID(port)(((ushort)((__builtin_constant_p(((port)+(0x02))) && ( (port)+(0x02)) < 256) ? __inwc((port)+(0x02)) : __inw((port )+(0x02))) >> 8) & 7) ((AscGetChipCfgLsw(port)(ushort)((__builtin_constant_p(((port)+(0x02))) && (( port)+(0x02)) < 256) ? __inwc((port)+(0x02)) : __inw((port )+(0x02))) >> 8) & ASC_MAX_TID7) |
1914 | #define AscGetExtraControl(port)(uchar)((__builtin_constant_p(((port)+(0x0D))) && ((port )+(0x0D)) < 256) ? __inbc((port)+(0x0D)) : __inb((port)+(0x0D ))) (uchar)inp((port)+IOP_EXTRA_CONTROL)((__builtin_constant_p(((port)+(0x0D))) && ((port)+(0x0D )) < 256) ? __inbc((port)+(0x0D)) : __inb((port)+(0x0D))) |
1915 | #define AscSetExtraControl(port, data)((__builtin_constant_p((((port)+(0x0D)))) && (((port) +(0x0D))) < 256) ? __outbc(((data)),(((port)+(0x0D)))) : __outb (((data)),(((port)+(0x0D))))) outp((port)+IOP_EXTRA_CONTROL, data)((__builtin_constant_p((((port)+(0x0D)))) && (((port) +(0x0D))) < 256) ? __outbc(((data)),(((port)+(0x0D)))) : __outb (((data)),(((port)+(0x0D))))) |
1916 | #define AscReadChipAX(port)(ushort)((__builtin_constant_p(((port)+(0x00))) && (( port)+(0x00)) < 256) ? __inwc((port)+(0x00)) : __inw((port )+(0x00))) (ushort)inpw((port)+IOP_REG_AX)((__builtin_constant_p(((port)+(0x00))) && ((port)+(0x00 )) < 256) ? __inwc((port)+(0x00)) : __inw((port)+(0x00))) |
1917 | #define AscWriteChipAX(port, data)((__builtin_constant_p((((port)+(0x00)))) && (((port) +(0x00))) < 256) ? __outwc(((data)),(((port)+(0x00)))) : __outw (((data)),(((port)+(0x00))))) outpw((port)+IOP_REG_AX, data)((__builtin_constant_p((((port)+(0x00)))) && (((port) +(0x00))) < 256) ? __outwc(((data)),(((port)+(0x00)))) : __outw (((data)),(((port)+(0x00))))) |
1918 | #define AscReadChipIX(port)(uchar)((__builtin_constant_p(((port)+(0x01))) && ((port )+(0x01)) < 256) ? __inbc((port)+(0x01)) : __inb((port)+(0x01 ))) (uchar)inp((port)+IOP_REG_IX)((__builtin_constant_p(((port)+(0x01))) && ((port)+(0x01 )) < 256) ? __inbc((port)+(0x01)) : __inb((port)+(0x01))) |
1919 | #define AscWriteChipIX(port, data)((__builtin_constant_p((((port)+(0x01)))) && (((port) +(0x01))) < 256) ? __outbc(((data)),(((port)+(0x01)))) : __outb (((data)),(((port)+(0x01))))) outp((port)+IOP_REG_IX, data)((__builtin_constant_p((((port)+(0x01)))) && (((port) +(0x01))) < 256) ? __outbc(((data)),(((port)+(0x01)))) : __outb (((data)),(((port)+(0x01))))) |
1920 | #define AscReadChipIH(port)(ushort)((__builtin_constant_p(((port)+(0x02))) && (( port)+(0x02)) < 256) ? __inwc((port)+(0x02)) : __inw((port )+(0x02))) (ushort)inpw((port)+IOP_REG_IH)((__builtin_constant_p(((port)+(0x02))) && ((port)+(0x02 )) < 256) ? __inwc((port)+(0x02)) : __inw((port)+(0x02))) |
1921 | #define AscWriteChipIH(port, data)((__builtin_constant_p((((port)+(0x02)))) && (((port) +(0x02))) < 256) ? __outwc(((data)),(((port)+(0x02)))) : __outw (((data)),(((port)+(0x02))))) outpw((port)+IOP_REG_IH, data)((__builtin_constant_p((((port)+(0x02)))) && (((port) +(0x02))) < 256) ? __outwc(((data)),(((port)+(0x02)))) : __outw (((data)),(((port)+(0x02))))) |
1922 | #define AscReadChipQP(port)(uchar)((__builtin_constant_p(((port)+(0x03))) && ((port )+(0x03)) < 256) ? __inbc((port)+(0x03)) : __inb((port)+(0x03 ))) (uchar)inp((port)+IOP_REG_QP)((__builtin_constant_p(((port)+(0x03))) && ((port)+(0x03 )) < 256) ? __inbc((port)+(0x03)) : __inb((port)+(0x03))) |
1923 | #define AscWriteChipQP(port, data)((__builtin_constant_p((((port)+(0x03)))) && (((port) +(0x03))) < 256) ? __outbc(((data)),(((port)+(0x03)))) : __outb (((data)),(((port)+(0x03))))) outp((port)+IOP_REG_QP, data)((__builtin_constant_p((((port)+(0x03)))) && (((port) +(0x03))) < 256) ? __outbc(((data)),(((port)+(0x03)))) : __outb (((data)),(((port)+(0x03))))) |
1924 | #define AscReadChipFIFO_L(port)(ushort)((__builtin_constant_p(((port)+IOP_REG_FIFO_L)) && ((port)+IOP_REG_FIFO_L) < 256) ? __inwc((port)+IOP_REG_FIFO_L ) : __inw((port)+IOP_REG_FIFO_L)) (ushort)inpw((port)+IOP_REG_FIFO_L)((__builtin_constant_p(((port)+IOP_REG_FIFO_L)) && (( port)+IOP_REG_FIFO_L) < 256) ? __inwc((port)+IOP_REG_FIFO_L ) : __inw((port)+IOP_REG_FIFO_L)) |
1925 | #define AscWriteChipFIFO_L(port, data)((__builtin_constant_p((((port)+IOP_REG_FIFO_L))) && ( ((port)+IOP_REG_FIFO_L)) < 256) ? __outwc(((data)),(((port )+IOP_REG_FIFO_L))) : __outw(((data)),(((port)+IOP_REG_FIFO_L )))) outpw((port)+IOP_REG_FIFO_L, data)((__builtin_constant_p((((port)+IOP_REG_FIFO_L))) && ( ((port)+IOP_REG_FIFO_L)) < 256) ? __outwc(((data)),(((port )+IOP_REG_FIFO_L))) : __outw(((data)),(((port)+IOP_REG_FIFO_L )))) |
1926 | #define AscReadChipFIFO_H(port)(ushort)((__builtin_constant_p(((port)+IOP_REG_FIFO_H)) && ((port)+IOP_REG_FIFO_H) < 256) ? __inwc((port)+IOP_REG_FIFO_H ) : __inw((port)+IOP_REG_FIFO_H)) (ushort)inpw((port)+IOP_REG_FIFO_H)((__builtin_constant_p(((port)+IOP_REG_FIFO_H)) && (( port)+IOP_REG_FIFO_H) < 256) ? __inwc((port)+IOP_REG_FIFO_H ) : __inw((port)+IOP_REG_FIFO_H)) |
1927 | #define AscWriteChipFIFO_H(port, data)((__builtin_constant_p((((port)+IOP_REG_FIFO_H))) && ( ((port)+IOP_REG_FIFO_H)) < 256) ? __outwc(((data)),(((port )+IOP_REG_FIFO_H))) : __outw(((data)),(((port)+IOP_REG_FIFO_H )))) outpw((port)+IOP_REG_FIFO_H, data)((__builtin_constant_p((((port)+IOP_REG_FIFO_H))) && ( ((port)+IOP_REG_FIFO_H)) < 256) ? __outwc(((data)),(((port )+IOP_REG_FIFO_H))) : __outw(((data)),(((port)+IOP_REG_FIFO_H )))) |
1928 | #define AscReadChipDmaSpeed(port)(uchar)((__builtin_constant_p(((port)+(0x07))) && ((port )+(0x07)) < 256) ? __inbc((port)+(0x07)) : __inb((port)+(0x07 ))) (uchar)inp((port)+IOP_DMA_SPEED)((__builtin_constant_p(((port)+(0x07))) && ((port)+(0x07 )) < 256) ? __inbc((port)+(0x07)) : __inb((port)+(0x07))) |
1929 | #define AscWriteChipDmaSpeed(port, data)((__builtin_constant_p((((port)+(0x07)))) && (((port) +(0x07))) < 256) ? __outbc(((data)),(((port)+(0x07)))) : __outb (((data)),(((port)+(0x07))))) outp((port)+IOP_DMA_SPEED, data)((__builtin_constant_p((((port)+(0x07)))) && (((port) +(0x07))) < 256) ? __outbc(((data)),(((port)+(0x07)))) : __outb (((data)),(((port)+(0x07))))) |
1930 | #define AscReadChipDA0(port)(ushort)((__builtin_constant_p(((port)+(0x08))) && (( port)+(0x08)) < 256) ? __inwc((port)+(0x08)) : __inw((port )+(0x08))) (ushort)inpw((port)+IOP_REG_DA0)((__builtin_constant_p(((port)+(0x08))) && ((port)+(0x08 )) < 256) ? __inwc((port)+(0x08)) : __inw((port)+(0x08))) |
1931 | #define AscWriteChipDA0(port)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) outpw((port)+IOP_REG_DA0, data)((__builtin_constant_p((((port)+(0x08)))) && (((port) +(0x08))) < 256) ? __outwc(((data)),(((port)+(0x08)))) : __outw (((data)),(((port)+(0x08))))) |
1932 | #define AscReadChipDA1(port)(ushort)((__builtin_constant_p(((port)+(0x0A))) && (( port)+(0x0A)) < 256) ? __inwc((port)+(0x0A)) : __inw((port )+(0x0A))) (ushort)inpw((port)+IOP_REG_DA1)((__builtin_constant_p(((port)+(0x0A))) && ((port)+(0x0A )) < 256) ? __inwc((port)+(0x0A)) : __inw((port)+(0x0A))) |
1933 | #define AscWriteChipDA1(port)((__builtin_constant_p((((port)+(0x0A)))) && (((port) +(0x0A))) < 256) ? __outwc(((data)),(((port)+(0x0A)))) : __outw (((data)),(((port)+(0x0A))))) outpw((port)+IOP_REG_DA1, data)((__builtin_constant_p((((port)+(0x0A)))) && (((port) +(0x0A))) < 256) ? __outwc(((data)),(((port)+(0x0A)))) : __outw (((data)),(((port)+(0x0A))))) |
1934 | #define AscReadChipDC0(port)(ushort)((__builtin_constant_p(((port)+(0x0C))) && (( port)+(0x0C)) < 256) ? __inwc((port)+(0x0C)) : __inw((port )+(0x0C))) (ushort)inpw((port)+IOP_REG_DC0)((__builtin_constant_p(((port)+(0x0C))) && ((port)+(0x0C )) < 256) ? __inwc((port)+(0x0C)) : __inw((port)+(0x0C))) |
1935 | #define AscWriteChipDC0(port)((__builtin_constant_p((((port)+(0x0C)))) && (((port) +(0x0C))) < 256) ? __outwc(((data)),(((port)+(0x0C)))) : __outw (((data)),(((port)+(0x0C))))) outpw((port)+IOP_REG_DC0, data)((__builtin_constant_p((((port)+(0x0C)))) && (((port) +(0x0C))) < 256) ? __outwc(((data)),(((port)+(0x0C)))) : __outw (((data)),(((port)+(0x0C))))) |
1936 | #define AscReadChipDC1(port)(ushort)((__builtin_constant_p(((port)+(0x0E))) && (( port)+(0x0E)) < 256) ? __inwc((port)+(0x0E)) : __inw((port )+(0x0E))) (ushort)inpw((port)+IOP_REG_DC1)((__builtin_constant_p(((port)+(0x0E))) && ((port)+(0x0E )) < 256) ? __inwc((port)+(0x0E)) : __inw((port)+(0x0E))) |
1937 | #define AscWriteChipDC1(port)((__builtin_constant_p((((port)+(0x0E)))) && (((port) +(0x0E))) < 256) ? __outwc(((data)),(((port)+(0x0E)))) : __outw (((data)),(((port)+(0x0E))))) outpw((port)+IOP_REG_DC1, data)((__builtin_constant_p((((port)+(0x0E)))) && (((port) +(0x0E))) < 256) ? __outwc(((data)),(((port)+(0x0E)))) : __outw (((data)),(((port)+(0x0E))))) |
1938 | #define AscReadChipDvcID(port)(uchar)((__builtin_constant_p(((port)+(0x05))) && ((port )+(0x05)) < 256) ? __inbc((port)+(0x05)) : __inb((port)+(0x05 ))) (uchar)inp((port)+IOP_REG_ID)((__builtin_constant_p(((port)+(0x05))) && ((port)+(0x05 )) < 256) ? __inbc((port)+(0x05)) : __inb((port)+(0x05))) |
1939 | #define AscWriteChipDvcID(port, data)((__builtin_constant_p((((port)+(0x05)))) && (((port) +(0x05))) < 256) ? __outbc(((data)),(((port)+(0x05)))) : __outb (((data)),(((port)+(0x05))))) outp((port)+IOP_REG_ID, data)((__builtin_constant_p((((port)+(0x05)))) && (((port) +(0x05))) < 256) ? __outbc(((data)),(((port)+(0x05)))) : __outb (((data)),(((port)+(0x05))))) |
1940 | |
1941 | STATICstatic int AscWriteEEPCmdReg(PortAddrunsigned short iop_base, uchar cmd_reg); |
1942 | STATICstatic int AscWriteEEPDataReg(PortAddrunsigned short iop_base, ushort data_reg); |
1943 | STATICstatic void AscWaitEEPRead(void); |
1944 | STATICstatic void AscWaitEEPWrite(void); |
1945 | STATICstatic ushort AscReadEEPWord(PortAddrunsigned short, uchar); |
1946 | STATICstatic ushort AscWriteEEPWord(PortAddrunsigned short, uchar, ushort); |
1947 | STATICstatic ushort AscGetEEPConfig(PortAddrunsigned short, ASCEEP_CONFIG *, ushort); |
1948 | STATICstatic int AscSetEEPConfigOnce(PortAddrunsigned short, ASCEEP_CONFIG *, ushort); |
1949 | STATICstatic int AscSetEEPConfig(PortAddrunsigned short, ASCEEP_CONFIG *, ushort); |
1950 | STATICstatic int AscStartChip(PortAddrunsigned short); |
1951 | STATICstatic int AscStopChip(PortAddrunsigned short); |
1952 | STATICstatic void AscSetChipIH(PortAddrunsigned short, ushort); |
1953 | STATICstatic int AscIsChipHalted(PortAddrunsigned short); |
1954 | STATICstatic void AscAckInterrupt(PortAddrunsigned short); |
1955 | STATICstatic void AscDisableInterrupt(PortAddrunsigned short); |
1956 | STATICstatic void AscEnableInterrupt(PortAddrunsigned short); |
1957 | STATICstatic void AscSetBank(PortAddrunsigned short, uchar); |
1958 | STATICstatic int AscResetChipAndScsiBus(ASC_DVC_VAR *); |
1959 | STATICstatic ushort AscGetIsaDmaChannel(PortAddrunsigned short); |
1960 | STATICstatic ushort AscSetIsaDmaChannel(PortAddrunsigned short, ushort); |
1961 | STATICstatic uchar AscSetIsaDmaSpeed(PortAddrunsigned short, uchar); |
1962 | STATICstatic uchar AscGetIsaDmaSpeed(PortAddrunsigned short); |
1963 | STATICstatic uchar AscReadLramByte(PortAddrunsigned short, ushort); |
1964 | STATICstatic ushort AscReadLramWord(PortAddrunsigned short, ushort); |
1965 | STATICstatic ulong AscReadLramDWord(PortAddrunsigned short, ushort); |
1966 | STATICstatic void AscWriteLramWord(PortAddrunsigned short, ushort, ushort); |
1967 | STATICstatic void AscWriteLramDWord(PortAddrunsigned short, ushort, ulong); |
1968 | STATICstatic void AscWriteLramByte(PortAddrunsigned short, ushort, uchar); |
1969 | STATICstatic ulong AscMemSumLramWord(PortAddrunsigned short, ushort, rintregister __s32); |
1970 | STATICstatic void AscMemWordSetLram(PortAddrunsigned short, ushort, ushort, rintregister __s32); |
1971 | STATICstatic void AscMemWordCopyToLram(PortAddrunsigned short, ushort, ushort *, int); |
1972 | STATICstatic void AscMemDWordCopyToLram(PortAddrunsigned short, ushort, ulong *, int); |
1973 | STATICstatic void AscMemWordCopyFromLram(PortAddrunsigned short, ushort, ushort *, int); |
1974 | STATICstatic ushort AscInitAscDvcVar(ASC_DVC_VAR asc_ptr_type *); |
1975 | STATICstatic ushort AscInitFromEEP(ASC_DVC_VAR asc_ptr_type *); |
1976 | STATICstatic ushort AscInitFromAscDvcVar(ASC_DVC_VAR asc_ptr_type *); |
1977 | STATICstatic ushort AscInitMicroCodeVar(ASC_DVC_VAR asc_ptr_type * asc_dvc); |
1978 | STATICstatic int AscTestExternalLram(ASC_DVC_VAR asc_ptr_type *); |
1979 | STATICstatic uchar AscMsgOutSDTR(ASC_DVC_VAR asc_ptr_type *, uchar, uchar); |
1980 | STATICstatic uchar AscCalSDTRData(ASC_DVC_VAR asc_ptr_type *, uchar, uchar); |
1981 | STATICstatic void AscSetChipSDTR(PortAddrunsigned short, uchar, uchar); |
1982 | STATICstatic uchar AscGetSynPeriodIndex(ASC_DVC_VAR asc_ptr_type *, rucharregister __u8); |
1983 | STATICstatic uchar AscAllocFreeQueue(PortAddrunsigned short, uchar); |
1984 | STATICstatic uchar AscAllocMultipleFreeQueue(PortAddrunsigned short, uchar, uchar); |
1985 | STATICstatic int AscRiscHaltedAbortSRB(ASC_DVC_VAR asc_ptr_type *, ulong); |
1986 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
1987 | STATICstatic int AscRiscHaltedAbortTIX(ASC_DVC_VAR asc_ptr_type *, uchar); |
1988 | #endif /* version >= v1.3.89 */ |
1989 | STATICstatic int AscHostReqRiscHalt(PortAddrunsigned short); |
1990 | STATICstatic int AscStopQueueExe(PortAddrunsigned short); |
1991 | STATICstatic int AscStartQueueExe(PortAddrunsigned short); |
1992 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
1993 | STATICstatic int AscCleanUpDiscQueue(PortAddrunsigned short); |
1994 | #endif /* version >= v1.3.89 */ |
1995 | STATICstatic int AscCleanUpBusyQueue(PortAddrunsigned short); |
1996 | STATICstatic int AscWaitTixISRDone(ASC_DVC_VAR asc_ptr_type *, uchar); |
1997 | STATICstatic int AscWaitISRDone(ASC_DVC_VAR asc_ptr_type *); |
1998 | STATICstatic ulong AscGetOnePhyAddr(ASC_DVC_VAR asc_ptr_type *, uchar *, |
1999 | ulong); |
2000 | STATICstatic int AscSendScsiQueue(ASC_DVC_VAR asc_ptr_type * asc_dvc, |
2001 | ASC_SCSI_Q * scsiq, |
2002 | uchar n_q_required); |
2003 | STATICstatic int AscPutReadyQueue(ASC_DVC_VAR asc_ptr_type *, |
2004 | ASC_SCSI_Q *, uchar); |
2005 | STATICstatic int AscPutReadySgListQueue(ASC_DVC_VAR asc_ptr_type *, |
2006 | ASC_SCSI_Q *, uchar); |
2007 | STATICstatic int AscSetChipSynRegAtID(PortAddrunsigned short, uchar, uchar); |
2008 | STATICstatic int AscSetRunChipSynRegAtID(PortAddrunsigned short, uchar, uchar); |
2009 | STATICstatic ushort AscInitLram(ASC_DVC_VAR asc_ptr_type *); |
2010 | STATICstatic int AscReInitLram(ASC_DVC_VAR asc_ptr_type *); |
2011 | STATICstatic ushort AscInitQLinkVar(ASC_DVC_VAR asc_ptr_type *); |
2012 | STATICstatic int AscSetLibErrorCode(ASC_DVC_VAR asc_ptr_type *, ushort); |
2013 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
2014 | STATICstatic int _AscWaitQDone(PortAddrunsigned short, ASC_SCSI_Q *); |
2015 | #endif /* version >= v1.3.89 */ |
2016 | STATICstatic int AscIsrChipHalted(ASC_DVC_VAR asc_ptr_type *); |
2017 | STATICstatic uchar _AscCopyLramScsiDoneQ(PortAddrunsigned short, ushort, |
2018 | ASC_QDONE_INFO *, ulong); |
2019 | STATICstatic int AscIsrQDone(ASC_DVC_VAR asc_ptr_type *); |
2020 | STATICstatic int AscCompareString(uchar *, uchar *, int); |
2021 | STATICstatic ushort AscGetEisaChipCfg(PortAddrunsigned short); |
2022 | STATICstatic ulong AscGetEisaProductID(PortAddrunsigned short); |
2023 | STATICstatic PortAddrunsigned short AscSearchIOPortAddrEISA(PortAddrunsigned short); |
2024 | STATICstatic uchar AscGetChipScsiCtrl(PortAddrunsigned short); |
2025 | STATICstatic uchar AscSetChipScsiID(PortAddrunsigned short, uchar); |
2026 | STATICstatic uchar AscGetChipVersion(PortAddrunsigned short, ushort); |
2027 | STATICstatic ushort AscGetChipBusType(PortAddrunsigned short); |
2028 | STATICstatic ulong AscLoadMicroCode(PortAddrunsigned short, ushort, ushort *, ushort); |
2029 | STATICstatic int AscFindSignature(PortAddrunsigned short); |
2030 | STATICstatic PortAddrunsigned short AscSearchIOPortAddr11(PortAddrunsigned short); |
2031 | STATICstatic void AscToggleIRQAct(PortAddrunsigned short); |
2032 | STATICstatic void AscSetISAPNPWaitForKey(void); |
2033 | STATICstatic uchar AscGetChipIRQ(PortAddrunsigned short, ushort); |
2034 | STATICstatic uchar AscSetChipIRQ(PortAddrunsigned short, uchar, ushort); |
2035 | STATICstatic ushort AscGetChipBiosAddress(PortAddrunsigned short, ushort); |
2036 | STATICstatic long DvcEnterCritical(void); |
2037 | STATICstatic void DvcLeaveCritical(long); |
2038 | STATICstatic void DvcInPortWords(PortAddrunsigned short, ushort *, int); |
2039 | STATICstatic void DvcOutPortWords(PortAddrunsigned short, ushort *, int); |
2040 | STATICstatic void DvcOutPortDWords(PortAddrunsigned short, ulong *, int); |
2041 | STATICstatic uchar DvcReadPCIConfigByte(ASC_DVC_VAR asc_ptr_type *, ushort); |
2042 | STATICstatic void DvcWritePCIConfigByte(ASC_DVC_VAR asc_ptr_type *, |
2043 | ushort, uchar); |
2044 | STATICstatic ushort AscGetChipBiosAddress(PortAddrunsigned short, ushort); |
2045 | STATICstatic void DvcSleepMilliSecond(ulong); |
2046 | STATICstatic void DvcDelayNanoSecond(ASC_DVC_VAR asc_ptr_type *, ulong); |
2047 | STATICstatic ulong DvcGetSGList(ASC_DVC_VAR asc_ptr_type *, uchar *, |
2048 | ulong, ASC_SG_HEAD *); |
2049 | STATICstatic void DvcPutScsiQ(PortAddrunsigned short, ushort, ushort *, int); |
2050 | STATICstatic void DvcGetQinfo(PortAddrunsigned short, ushort, ushort *, int); |
2051 | STATICstatic PortAddrunsigned short AscSearchIOPortAddr(PortAddrunsigned short, ushort); |
2052 | STATICstatic ushort AscInitGetConfig(ASC_DVC_VAR asc_ptr_type *); |
2053 | STATICstatic ushort AscInitSetConfig(ASC_DVC_VAR asc_ptr_type *); |
2054 | STATICstatic ushort AscInitAsc1000Driver(ASC_DVC_VAR asc_ptr_type *); |
2055 | STATICstatic void AscAsyncFix(ASC_DVC_VAR asc_ptr_type *, uchar, |
2056 | ASC_SCSI_INQUIRY *); |
2057 | STATICstatic int AscTagQueuingSafe(ASC_SCSI_INQUIRY *); |
2058 | STATICstatic void AscInquiryHandling(ASC_DVC_VAR asc_ptr_type *, |
2059 | uchar, ASC_SCSI_INQUIRY *); |
2060 | STATICstatic int AscExeScsiQueue(ASC_DVC_VAR asc_ptr_type *, ASC_SCSI_Q *); |
2061 | STATICstatic int AscISR(ASC_DVC_VAR asc_ptr_type *); |
2062 | STATICstatic uint AscGetNumOfFreeQueue(ASC_DVC_VAR asc_ptr_type *, uchar, |
2063 | uchar); |
2064 | STATICstatic int AscSgListToQueue(int); |
2065 | STATICstatic int AscAbortSRB(ASC_DVC_VAR asc_ptr_type *, ulong); |
2066 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
2067 | STATICstatic int AscResetDevice(ASC_DVC_VAR asc_ptr_type *, uchar); |
2068 | #endif /* version >= v1.3.89 */ |
2069 | STATICstatic int AscResetSB(ASC_DVC_VAR asc_ptr_type *); |
2070 | STATICstatic void AscEnableIsaDma(uchar); |
2071 | STATICstatic ulong AscGetMaxDmaCount(ushort); |
2072 | |
2073 | |
2074 | /* |
2075 | * --- Adv Library Constants and Macros |
2076 | */ |
2077 | |
2078 | #define ADV_LIB_VERSION_MAJOR3 3 |
2079 | #define ADV_LIB_VERSION_MINOR45 45 |
2080 | |
2081 | /* d_os_dep.h */ |
2082 | #define ADV_OS_LINUX |
2083 | |
2084 | /* |
2085 | * Define Adv Library required special types. |
2086 | */ |
2087 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
2088 | #define AdvPortAddrunsigned long unsigned short /* I/O Port address size */ |
2089 | #else /* version >= v1,3,0 */ |
2090 | #define AdvPortAddrunsigned long unsigned long /* Virtual memory address size */ |
2091 | #endif /* version >= v1,3,0 */ |
2092 | |
2093 | /* |
2094 | * Define Adv Library required memory access macros. |
2095 | */ |
2096 | #define ADV_MEM_READB(addr)(*(volatile unsigned char *) (addr)) readb(addr)(*(volatile unsigned char *) (addr)) |
2097 | #define ADV_MEM_READW(addr)(*(volatile unsigned short *) (addr)) readw(addr)(*(volatile unsigned short *) (addr)) |
2098 | #define ADV_MEM_WRITEB(addr, byte)((*(volatile unsigned char *) (addr)) = (byte)) writeb(byte, addr)((*(volatile unsigned char *) (addr)) = (byte)) |
2099 | #define ADV_MEM_WRITEW(addr, word)((*(volatile unsigned short *) (addr)) = (word)) writew(word, addr)((*(volatile unsigned short *) (addr)) = (word)) |
2100 | |
2101 | /* |
2102 | * The I/O memory mapping function names changed in 2.1.X. |
2103 | */ |
2104 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,0)(((2) * 65536) + ((1) * 256) + (0)) |
2105 | #define ioremapvremap vremap |
2106 | #define iounmapvfree vfree |
2107 | #endif /* version < v2.1.0 */ |
2108 | |
2109 | /* |
2110 | * Define total number of simultaneous maximum element scatter-gather |
2111 | * requests, i.e. ADV_TOT_SG_LIST * ADV_MAX_SG_LIST is the total number |
2112 | * of simultaneous scatter-gather elements supported per wide adapter. |
2113 | */ |
2114 | #define ADV_TOT_SG_LIST64 64 |
2115 | |
2116 | /* |
2117 | * Define Adv Library required per request scatter-gather element limit. |
2118 | */ |
2119 | #define ADV_MAX_SG_LIST64 64 |
2120 | |
2121 | /* |
2122 | * Scatter-Gather Definitions per request. |
2123 | * |
2124 | * Because SG block memory is allocated in virtual memory but is |
2125 | * referenced by the microcode as physical memory, we need to do |
2126 | * calculations to insure there will be enough physically contiguous |
2127 | * memory to support ADV_MAX_SG_LIST SG entries. |
2128 | */ |
2129 | |
2130 | /* Number of SG blocks needed. */ |
2131 | #define ADV_NUM_SG_BLOCK((64 + (15 - 1))/15) \ |
2132 | ((ADV_MAX_SG_LIST64 + (NO_OF_SG_PER_BLOCK15 - 1))/NO_OF_SG_PER_BLOCK15) |
2133 | |
2134 | /* Total contiguous memory needed for SG blocks. */ |
2135 | #define ADV_SG_TOTAL_MEM_SIZE(sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) \ |
2136 | (sizeof(ADV_SG_BLOCK) * ADV_NUM_SG_BLOCK((64 + (15 - 1))/15)) |
2137 | |
2138 | #define ASC_PAGE_SIZE(1 << 12) PAGE_SIZE(1 << 12) |
2139 | |
2140 | /* |
2141 | * Number of page crossings possible for the total contiguous virtual memory |
2142 | * needed for SG blocks. |
2143 | * |
2144 | * We need to allocate this many additional SG blocks in virtual memory to |
2145 | * insure there will be space for ADV_NUM_SG_BLOCK physically contiguous |
2146 | * scatter-gather blocks. |
2147 | */ |
2148 | #define ADV_NUM_PAGE_CROSSING(((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12)) \ |
2149 | ((ADV_SG_TOTAL_MEM_SIZE(sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + (ASC_PAGE_SIZE(1 << 12) - 1))/ASC_PAGE_SIZE(1 << 12)) |
2150 | |
2151 | /* |
2152 | * Define Adv Library Assertion Macro. |
2153 | */ |
2154 | |
2155 | #define ADV_ASSERT(a){ if (!(a)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 2155); } } ASC_ASSERT(a){ if (!(a)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 2155); } } |
2156 | |
2157 | /* a_condor.h */ |
2158 | #define ADV_PCI_VENDOR_ID0x10CD 0x10CD |
2159 | #define ADV_PCI_DEVICE_ID_REV_A0x2300 0x2300 |
2160 | |
2161 | #define ASC_EEP_DVC_CFG_BEGIN(0x00) (0x00) |
2162 | #define ASC_EEP_DVC_CFG_END(0x15) (0x15) |
2163 | #define ASC_EEP_DVC_CTL_BEGIN(0x16) (0x16) /* location of OEM name */ |
2164 | #define ASC_EEP_MAX_WORD_ADDR(0x1E) (0x1E) |
2165 | |
2166 | #define ASC_EEP_DELAY_MS100 100 |
2167 | |
2168 | /* |
2169 | * EEPROM bits reference by the RISC after initialization. |
2170 | */ |
2171 | #define ADV_EEPROM_BIG_ENDIAN0x8000 0x8000 /* EEPROM Bit 15 */ |
2172 | #define ADV_EEPROM_BIOS_ENABLE0x4000 0x4000 /* EEPROM Bit 14 */ |
2173 | #define ADV_EEPROM_TERM_POL0x2000 0x2000 /* EEPROM Bit 13 */ |
2174 | |
2175 | /* |
2176 | * EEPROM configuration format |
2177 | * |
2178 | * Field naming convention: |
2179 | * |
2180 | * *_enable indicates the field enables or disables the feature. The |
2181 | * value is never reset. |
2182 | * |
2183 | * *_able indicates both whether a feature should be enabled or disabled |
2184 | * and whether a device isi capable of the feature. At initialization |
2185 | * this field may be set, but later if a device is found to be incapable |
2186 | * of the feature, the field is cleared. |
2187 | * |
2188 | * Default values are maintained in a_init.c in the structure |
2189 | * Default_EEPROM_Config. |
2190 | */ |
2191 | typedef struct adveep_config |
2192 | { |
2193 | /* Word Offset, Description */ |
2194 | |
2195 | ushort cfg_lsw; /* 00 power up initialization */ |
2196 | /* bit 13 set - Term Polarity Control */ |
2197 | /* bit 14 set - BIOS Enable */ |
2198 | /* bit 15 set - Big Endian Mode */ |
2199 | ushort cfg_msw; /* 01 unused */ |
2200 | ushort disc_enable; /* 02 disconnect enable */ |
2201 | ushort wdtr_able; /* 03 Wide DTR able */ |
2202 | ushort sdtr_able; /* 04 Synchronous DTR able */ |
2203 | ushort start_motor; /* 05 send start up motor */ |
2204 | ushort tagqng_able; /* 06 tag queuing able */ |
2205 | ushort bios_scan; /* 07 BIOS device control */ |
2206 | ushort scam_tolerant; /* 08 no scam */ |
2207 | |
2208 | uchar adapter_scsi_id; /* 09 Host Adapter ID */ |
2209 | uchar bios_boot_delay; /* power up wait */ |
2210 | |
2211 | uchar scsi_reset_delay; /* 10 reset delay */ |
2212 | uchar bios_id_lun; /* first boot device scsi id & lun */ |
2213 | /* high nibble is lun */ |
2214 | /* low nibble is scsi id */ |
2215 | |
2216 | uchar termination; /* 11 0 - automatic */ |
2217 | /* 1 - low off / high off */ |
2218 | /* 2 - low off / high on */ |
2219 | /* 3 - low on / high on */ |
2220 | /* There is no low on / high off */ |
2221 | |
2222 | uchar reserved1; /* reserved byte (not used) */ |
2223 | |
2224 | ushort bios_ctrl; /* 12 BIOS control bits */ |
2225 | /* bit 0 set: BIOS don't act as initiator. */ |
2226 | /* bit 1 set: BIOS > 1 GB support */ |
2227 | /* bit 2 set: BIOS > 2 Disk Support */ |
2228 | /* bit 3 set: BIOS don't support removables */ |
2229 | /* bit 4 set: BIOS support bootable CD */ |
2230 | /* bit 5 set: */ |
2231 | /* bit 6 set: BIOS support multiple LUNs */ |
2232 | /* bit 7 set: BIOS display of message */ |
2233 | /* bit 8 set: */ |
2234 | /* bit 9 set: Reset SCSI bus during init. */ |
2235 | /* bit 10 set: */ |
2236 | /* bit 11 set: No verbose initialization. */ |
2237 | /* bit 12 set: SCSI parity enabled */ |
2238 | /* bit 13 set: */ |
2239 | /* bit 14 set: */ |
2240 | /* bit 15 set: */ |
2241 | ushort ultra_able; /* 13 ULTRA speed able */ |
2242 | ushort reserved2; /* 14 reserved */ |
2243 | uchar max_host_qng; /* 15 maximum host queuing */ |
2244 | uchar max_dvc_qng; /* maximum per device queuing */ |
2245 | ushort dvc_cntl; /* 16 control bit for driver */ |
2246 | ushort bug_fix; /* 17 control bit for bug fix */ |
2247 | ushort serial_number_word1; /* 18 Board serial number word 1 */ |
2248 | ushort serial_number_word2; /* 19 Board serial number word 2 */ |
2249 | ushort serial_number_word3; /* 20 Board serial number word 3 */ |
2250 | ushort check_sum; /* 21 EEP check sum */ |
2251 | uchar oem_name[16]; /* 22 OEM name */ |
2252 | ushort dvc_err_code; /* 30 last device driver error code */ |
2253 | ushort adv_err_code; /* 31 last uc and Adv Lib error code */ |
2254 | ushort adv_err_addr; /* 32 last uc error address */ |
2255 | ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ |
2256 | ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ |
2257 | ushort saved_adv_err_addr; /* 35 saved last uc error address */ |
2258 | ushort num_of_err; /* 36 number of error */ |
2259 | } ADVEEP_CONFIG; |
2260 | |
2261 | /* |
2262 | * EEPROM Commands |
2263 | */ |
2264 | #define ASC_EEP_CMD_DONE0x0200 0x0200 |
2265 | #define ASC_EEP_CMD_DONE_ERR0x0001 0x0001 |
2266 | |
2267 | /* cfg_word */ |
2268 | #define EEP_CFG_WORD_BIG_ENDIAN0x8000 0x8000 |
2269 | |
2270 | /* bios_ctrl */ |
2271 | #define BIOS_CTRL_BIOS0x0001 0x0001 |
2272 | #define BIOS_CTRL_EXTENDED_XLAT0x0002 0x0002 |
2273 | #define BIOS_CTRL_GT_2_DISK0x0004 0x0004 |
2274 | #define BIOS_CTRL_BIOS_REMOVABLE0x0008 0x0008 |
2275 | #define BIOS_CTRL_BOOTABLE_CD0x0010 0x0010 |
2276 | #define BIOS_CTRL_MULTIPLE_LUN0x0040 0x0040 |
2277 | #define BIOS_CTRL_DISPLAY_MSG0x0080 0x0080 |
2278 | #define BIOS_CTRL_NO_SCAM0x0100 0x0100 |
2279 | #define BIOS_CTRL_RESET_SCSI_BUS0x0200 0x0200 |
2280 | #define BIOS_CTRL_INIT_VERBOSE0x0800 0x0800 |
2281 | #define BIOS_CTRL_SCSI_PARITY0x1000 0x1000 |
2282 | |
2283 | /* |
2284 | * ASC 3550 Internal Memory Size - 8KB |
2285 | */ |
2286 | #define ADV_CONDOR_MEMSIZE0x2000 0x2000 /* 8 KB Internal Memory */ |
2287 | |
2288 | /* |
2289 | * ASC 3550 I/O Length - 64 bytes |
2290 | */ |
2291 | #define ADV_CONDOR_IOLEN0x40 0x40 /* I/O Port Range in bytes */ |
2292 | |
2293 | /* |
2294 | * Byte I/O register address from base of 'iop_base'. |
2295 | */ |
2296 | #define IOPB_INTR_STATUS_REG0x00 0x00 |
2297 | #define IOPB_CHIP_ID_10x01 0x01 |
2298 | #define IOPB_INTR_ENABLES0x02 0x02 |
2299 | #define IOPB_CHIP_TYPE_REV0x03 0x03 |
2300 | #define IOPB_RES_ADDR_40x04 0x04 |
2301 | #define IOPB_RES_ADDR_50x05 0x05 |
2302 | #define IOPB_RAM_DATA0x06 0x06 |
2303 | #define IOPB_RES_ADDR_70x07 0x07 |
2304 | #define IOPB_FLAG_REG0x08 0x08 |
2305 | #define IOPB_RES_ADDR_90x09 0x09 |
2306 | #define IOPB_RISC_CSR0x0A 0x0A |
2307 | #define IOPB_RES_ADDR_B0x0B 0x0B |
2308 | #define IOPB_RES_ADDR_C0x0C 0x0C |
2309 | #define IOPB_RES_ADDR_D0x0D 0x0D |
2310 | #define IOPB_RES_ADDR_E0x0E 0x0E |
2311 | #define IOPB_RES_ADDR_F0x0F 0x0F |
2312 | #define IOPB_MEM_CFG0x10 0x10 |
2313 | #define IOPB_RES_ADDR_110x11 0x11 |
2314 | #define IOPB_RES_ADDR_120x12 0x12 |
2315 | #define IOPB_RES_ADDR_130x13 0x13 |
2316 | #define IOPB_FLASH_PAGE0x14 0x14 |
2317 | #define IOPB_RES_ADDR_150x15 0x15 |
2318 | #define IOPB_RES_ADDR_160x16 0x16 |
2319 | #define IOPB_RES_ADDR_170x17 0x17 |
2320 | #define IOPB_FLASH_DATA0x18 0x18 |
2321 | #define IOPB_RES_ADDR_190x19 0x19 |
2322 | #define IOPB_RES_ADDR_1A0x1A 0x1A |
2323 | #define IOPB_RES_ADDR_1B0x1B 0x1B |
2324 | #define IOPB_RES_ADDR_1C0x1C 0x1C |
2325 | #define IOPB_RES_ADDR_1D0x1D 0x1D |
2326 | #define IOPB_RES_ADDR_1E0x1E 0x1E |
2327 | #define IOPB_RES_ADDR_1F0x1F 0x1F |
2328 | #define IOPB_DMA_CFG00x20 0x20 |
2329 | #define IOPB_DMA_CFG10x21 0x21 |
2330 | #define IOPB_TICKLE0x22 0x22 |
2331 | #define IOPB_DMA_REG_WR0x23 0x23 |
2332 | #define IOPB_SDMA_STATUS0x24 0x24 |
2333 | #define IOPB_SCSI_BYTE_CNT0x25 0x25 |
2334 | #define IOPB_HOST_BYTE_CNT0x26 0x26 |
2335 | #define IOPB_BYTE_LEFT_TO_XFER0x27 0x27 |
2336 | #define IOPB_BYTE_TO_XFER_00x28 0x28 |
2337 | #define IOPB_BYTE_TO_XFER_10x29 0x29 |
2338 | #define IOPB_BYTE_TO_XFER_20x2A 0x2A |
2339 | #define IOPB_BYTE_TO_XFER_30x2B 0x2B |
2340 | #define IOPB_ACC_GRP0x2C 0x2C |
2341 | #define IOPB_RES_ADDR_2D0x2D 0x2D |
2342 | #define IOPB_DEV_ID0x2E 0x2E |
2343 | #define IOPB_RES_ADDR_2F0x2F 0x2F |
2344 | #define IOPB_SCSI_DATA0x30 0x30 |
2345 | #define IOPB_RES_ADDR_310x31 0x31 |
2346 | #define IOPB_RES_ADDR_320x32 0x32 |
2347 | #define IOPB_SCSI_DATA_HSHK0x33 0x33 |
2348 | #define IOPB_SCSI_CTRL0x34 0x34 |
2349 | #define IOPB_RES_ADDR_350x35 0x35 |
2350 | #define IOPB_RES_ADDR_360x36 0x36 |
2351 | #define IOPB_RES_ADDR_370x37 0x37 |
2352 | #define IOPB_RES_ADDR_380x38 0x38 |
2353 | #define IOPB_RES_ADDR_390x39 0x39 |
2354 | #define IOPB_RES_ADDR_3A0x3A 0x3A |
2355 | #define IOPB_RES_ADDR_3B0x3B 0x3B |
2356 | #define IOPB_RFIFO_CNT0x3C 0x3C |
2357 | #define IOPB_RES_ADDR_3D0x3D 0x3D |
2358 | #define IOPB_RES_ADDR_3E0x3E 0x3E |
2359 | #define IOPB_RES_ADDR_3F0x3F 0x3F |
2360 | |
2361 | /* |
2362 | * Word I/O register address from base of 'iop_base'. |
2363 | */ |
2364 | #define IOPW_CHIP_ID_00x00 0x00 /* CID0 */ |
2365 | #define IOPW_CTRL_REG0x02 0x02 /* CC */ |
2366 | #define IOPW_RAM_ADDR0x04 0x04 /* LA */ |
2367 | #define IOPW_RAM_DATA0x06 0x06 /* LD */ |
2368 | #define IOPW_RES_ADDR_080x08 0x08 |
2369 | #define IOPW_RISC_CSR0x0A 0x0A /* CSR */ |
2370 | #define IOPW_SCSI_CFG00x0C 0x0C /* CFG0 */ |
2371 | #define IOPW_SCSI_CFG10x0E 0x0E /* CFG1 */ |
2372 | #define IOPW_RES_ADDR_100x10 0x10 |
2373 | #define IOPW_SEL_MASK0x12 0x12 /* SM */ |
2374 | #define IOPW_RES_ADDR_140x14 0x14 |
2375 | #define IOPW_FLASH_ADDR0x16 0x16 /* FA */ |
2376 | #define IOPW_RES_ADDR_180x18 0x18 |
2377 | #define IOPW_EE_CMD0x1A 0x1A /* EC */ |
2378 | #define IOPW_EE_DATA0x1C 0x1C /* ED */ |
2379 | #define IOPW_SFIFO_CNT0x1E 0x1E /* SFC */ |
2380 | #define IOPW_RES_ADDR_200x20 0x20 |
2381 | #define IOPW_Q_BASE0x22 0x22 /* QB */ |
2382 | #define IOPW_QP0x24 0x24 /* QP */ |
2383 | #define IOPW_IX0x26 0x26 /* IX */ |
2384 | #define IOPW_SP0x28 0x28 /* SP */ |
2385 | #define IOPW_PC0x2A 0x2A /* PC */ |
2386 | #define IOPW_RES_ADDR_2C0x2C 0x2C |
2387 | #define IOPW_RES_ADDR_2E0x2E 0x2E |
2388 | #define IOPW_SCSI_DATA0x30 0x30 /* SD */ |
2389 | #define IOPW_SCSI_DATA_HSHK0x32 0x32 /* SDH */ |
2390 | #define IOPW_SCSI_CTRL0x34 0x34 /* SC */ |
2391 | #define IOPW_HSHK_CFG0x36 0x36 /* HCFG */ |
2392 | #define IOPW_SXFR_STATUS0x36 0x36 /* SXS */ |
2393 | #define IOPW_SXFR_CNTL0x38 0x38 /* SXL */ |
2394 | #define IOPW_SXFR_CNTH0x3A 0x3A /* SXH */ |
2395 | #define IOPW_RES_ADDR_3C0x3C 0x3C |
2396 | #define IOPW_RFIFO_DATA0x3E 0x3E /* RFD */ |
2397 | |
2398 | /* |
2399 | * Doubleword I/O register address from base of 'iop_base'. |
2400 | */ |
2401 | #define IOPDW_RES_ADDR_00x00 0x00 |
2402 | #define IOPDW_RAM_DATA0x04 0x04 |
2403 | #define IOPDW_RES_ADDR_80x08 0x08 |
2404 | #define IOPDW_RES_ADDR_C0x0C 0x0C |
2405 | #define IOPDW_RES_ADDR_100x10 0x10 |
2406 | #define IOPDW_RES_ADDR_140x14 0x14 |
2407 | #define IOPDW_RES_ADDR_180x18 0x18 |
2408 | #define IOPDW_RES_ADDR_1C0x1C 0x1C |
2409 | #define IOPDW_SDMA_ADDR00x20 0x20 |
2410 | #define IOPDW_SDMA_ADDR10x24 0x24 |
2411 | #define IOPDW_SDMA_COUNT0x28 0x28 |
2412 | #define IOPDW_SDMA_ERROR0x2C 0x2C |
2413 | #define IOPDW_RDMA_ADDR00x30 0x30 |
2414 | #define IOPDW_RDMA_ADDR10x34 0x34 |
2415 | #define IOPDW_RDMA_COUNT0x38 0x38 |
2416 | #define IOPDW_RDMA_ERROR0x3C 0x3C |
2417 | |
2418 | #define ADV_CHIP_ID_BYTE0x25 0x25 |
2419 | #define ADV_CHIP_ID_WORD0x04C1 0x04C1 |
2420 | |
2421 | #define ADV_SC_SCSI_BUS_RESET0x2000 0x2000 |
2422 | |
2423 | #define ADV_INTR_ENABLE_HOST_INTR0x01 0x01 |
2424 | #define ADV_INTR_ENABLE_SEL_INTR0x02 0x02 |
2425 | #define ADV_INTR_ENABLE_DPR_INTR0x04 0x04 |
2426 | #define ADV_INTR_ENABLE_RTA_INTR0x08 0x08 |
2427 | #define ADV_INTR_ENABLE_RMA_INTR0x10 0x10 |
2428 | #define ADV_INTR_ENABLE_RST_INTR0x20 0x20 |
2429 | #define ADV_INTR_ENABLE_DPE_INTR0x40 0x40 |
2430 | #define ADV_INTR_ENABLE_GLOBAL_INTR0x80 0x80 |
2431 | |
2432 | #define ADV_INTR_STATUS_INTRA0x01 0x01 |
2433 | #define ADV_INTR_STATUS_INTRB0x02 0x02 |
2434 | #define ADV_INTR_STATUS_INTRC0x04 0x04 |
2435 | |
2436 | #define ADV_RISC_CSR_STOP(0x0000) (0x0000) |
2437 | #define ADV_RISC_TEST_COND(0x2000) (0x2000) |
2438 | #define ADV_RISC_CSR_RUN(0x4000) (0x4000) |
2439 | #define ADV_RISC_CSR_SINGLE_STEP(0x8000) (0x8000) |
2440 | |
2441 | #define ADV_CTRL_REG_HOST_INTR0x0100 0x0100 |
2442 | #define ADV_CTRL_REG_SEL_INTR0x0200 0x0200 |
2443 | #define ADV_CTRL_REG_DPR_INTR0x0400 0x0400 |
2444 | #define ADV_CTRL_REG_RTA_INTR0x0800 0x0800 |
2445 | #define ADV_CTRL_REG_RMA_INTR0x1000 0x1000 |
2446 | #define ADV_CTRL_REG_RES_BIT140x2000 0x2000 |
2447 | #define ADV_CTRL_REG_DPE_INTR0x4000 0x4000 |
2448 | #define ADV_CTRL_REG_POWER_DONE0x8000 0x8000 |
2449 | #define ADV_CTRL_REG_ANY_INTR0xFF00 0xFF00 |
2450 | |
2451 | #define ADV_CTRL_REG_CMD_RESET0x00C6 0x00C6 |
2452 | #define ADV_CTRL_REG_CMD_WR_IO_REG0x00C5 0x00C5 |
2453 | #define ADV_CTRL_REG_CMD_RD_IO_REG0x00C4 0x00C4 |
2454 | #define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE0x00C3 0x00C3 |
2455 | #define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE0x00C2 0x00C2 |
2456 | |
2457 | #define ADV_SCSI_CTRL_RSTOUT0x2000 0x2000 |
2458 | |
2459 | #define AdvIsIntPending(port)(((*(volatile unsigned short *) ((port) + (0x02)))) & 0x0100 ) \ |
2460 | (AdvReadWordRegister(port, IOPW_CTRL_REG)((*(volatile unsigned short *) ((port) + (0x02)))) & ADV_CTRL_REG_HOST_INTR0x0100) |
2461 | |
2462 | /* |
2463 | * SCSI_CFG0 Register bit definitions |
2464 | */ |
2465 | #define TIMER_MODEAB0xC000 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ |
2466 | #define PARITY_EN0x2000 0x2000 /* Enable SCSI Parity Error detection */ |
2467 | #define EVEN_PARITY0x1000 0x1000 /* Select Even Parity */ |
2468 | #define WD_LONG0x0800 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ |
2469 | #define QUEUE_1280x0400 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ |
2470 | #define PRIM_MODE0x0100 0x0100 /* Primitive SCSI mode */ |
2471 | #define SCAM_EN0x0080 0x0080 /* Enable SCAM selection */ |
2472 | #define SEL_TMO_LONG0x0040 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ |
2473 | #define CFRM_ID0x0020 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ |
2474 | #define OUR_ID_EN0x0010 0x0010 /* Enable OUR_ID bits */ |
2475 | #define OUR_ID0x000F 0x000F /* SCSI ID */ |
2476 | |
2477 | /* |
2478 | * SCSI_CFG1 Register bit definitions |
2479 | */ |
2480 | #define BIG_ENDIAN0x8000 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ |
2481 | #define TERM_POL0x2000 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ |
2482 | #define SLEW_RATE0x1000 0x1000 /* SCSI output buffer slew rate */ |
2483 | #define FILTER_SEL0x0C00 0x0C00 /* Filter Period Selection */ |
2484 | #define FLTR_DISABLE0x0000 0x0000 /* Input Filtering Disabled */ |
2485 | #define FLTR_11_TO_20NS0x0800 0x0800 /* Input Filtering 11ns to 20ns */ |
2486 | #define FLTR_21_TO_39NS0x0C00 0x0C00 /* Input Filtering 21ns to 39ns */ |
2487 | #define ACTIVE_DBL0x0200 0x0200 /* Disable Active Negation */ |
2488 | #define DIFF_MODE0x0100 0x0100 /* SCSI differential Mode (Read-Only) */ |
2489 | #define DIFF_SENSE0x0080 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ |
2490 | #define TERM_CTL_SEL0x0040 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ |
2491 | #define TERM_CTL0x0030 0x0030 /* External SCSI Termination Bits */ |
2492 | #define TERM_CTL_H0x0020 0x0020 /* Enable External SCSI Upper Termination */ |
2493 | #define TERM_CTL_L0x0010 0x0010 /* Enable External SCSI Lower Termination */ |
2494 | #define CABLE_DETECT0x000F 0x000F /* External SCSI Cable Connection Status */ |
2495 | |
2496 | #define CABLE_ILLEGAL_A0x7 0x7 |
2497 | /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ |
2498 | |
2499 | #define CABLE_ILLEGAL_B0xB 0xB |
2500 | /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ |
2501 | |
2502 | /* |
2503 | The following table details the SCSI_CFG1 Termination Polarity, |
2504 | Termination Control and Cable Detect bits. |
2505 | |
2506 | Cable Detect | Termination |
2507 | Bit 3 2 1 0 | 5 4 | Notes |
2508 | _____________|________|____________________ |
2509 | 1 1 1 0 | on on | Internal wide only |
2510 | 1 1 0 1 | on on | Internal narrow only |
2511 | 1 0 1 1 | on on | External narrow only |
2512 | 0 x 1 1 | on on | External wide only |
2513 | 1 1 0 0 | on off| Internal wide and internal narrow |
2514 | 1 0 1 0 | on off| Internal wide and external narrow |
2515 | 0 x 1 0 | off off| Internal wide and external wide |
2516 | 1 0 0 1 | on off| Internal narrow and external narrow |
2517 | 0 x 0 1 | on off| Internal narrow and external wide |
2518 | 1 1 1 1 | on on | No devices are attached |
2519 | x 0 0 0 | on on | Illegal (all 3 connectors are used) |
2520 | 0 x 0 0 | on on | Illegal (all 3 connectors are used) |
2521 | |
2522 | x means don't-care (either '0' or '1') |
2523 | |
2524 | If term_pol (bit 13) is '0' (active-low terminator enable), then: |
2525 | 'on' is '0' and 'off' is '1'. |
2526 | |
2527 | If term_pol bit is '1' (meaning active-hi terminator enable), then: |
2528 | 'on' is '1' and 'off' is '0'. |
2529 | */ |
2530 | |
2531 | /* |
2532 | * MEM_CFG Register bit definitions |
2533 | */ |
2534 | #define BIOS_EN0x40 0x40 /* BIOS Enable MIO:14,EEP:14 */ |
2535 | #define FAST_EE_CLK0x20 0x20 /* Diagnostic Bit */ |
2536 | #define RAM_SZ0x1C 0x1C /* Specify size of RAM to RISC */ |
2537 | #define RAM_SZ_2KB0x00 0x00 /* 2 KB */ |
2538 | #define RAM_SZ_4KB0x04 0x04 /* 4 KB */ |
2539 | #define RAM_SZ_8KB0x08 0x08 /* 8 KB */ |
2540 | #define RAM_SZ_16KB0x0C 0x0C /* 16 KB */ |
2541 | #define RAM_SZ_32KB0x10 0x10 /* 32 KB */ |
2542 | #define RAM_SZ_64KB0x14 0x14 /* 64 KB */ |
2543 | |
2544 | /* |
2545 | * DMA_CFG0 Register bit definitions |
2546 | * |
2547 | * This register is only accessible to the host. |
2548 | */ |
2549 | #define BC_THRESH_ENB0x80 0x80 /* PCI DMA Start Conditions */ |
2550 | #define FIFO_THRESH0x70 0x70 /* PCI DMA FIFO Threshold */ |
2551 | #define FIFO_THRESH_16B0x00 0x00 /* 16 bytes */ |
2552 | #define FIFO_THRESH_32B0x20 0x20 /* 32 bytes */ |
2553 | #define FIFO_THRESH_48B0x30 0x30 /* 48 bytes */ |
2554 | #define FIFO_THRESH_64B0x40 0x40 /* 64 bytes */ |
2555 | #define FIFO_THRESH_80B0x50 0x50 /* 80 bytes (default) */ |
2556 | #define FIFO_THRESH_96B0x60 0x60 /* 96 bytes */ |
2557 | #define FIFO_THRESH_112B0x70 0x70 /* 112 bytes */ |
2558 | #define START_CTL0x0C 0x0C /* DMA start conditions */ |
2559 | #define START_CTL_TH0x00 0x00 /* Wait threshold level (default) */ |
2560 | #define START_CTL_ID0x04 0x04 /* Wait SDMA/SBUS idle */ |
2561 | #define START_CTL_THID0x08 0x08 /* Wait threshold and SDMA/SBUS idle */ |
2562 | #define START_CTL_EMFU0x0C 0x0C /* Wait SDMA FIFO empty/full */ |
2563 | #define READ_CMD0x03 0x03 /* Memory Read Method */ |
2564 | #define READ_CMD_MR0x00 0x00 /* Memory Read */ |
2565 | #define READ_CMD_MRL0x02 0x02 /* Memory Read Long */ |
2566 | #define READ_CMD_MRM0x03 0x03 /* Memory Read Multiple (default) */ |
2567 | |
2568 | /* a_advlib.h */ |
2569 | |
2570 | /* |
2571 | * Adv Library Status Definitions |
2572 | */ |
2573 | #define ADV_TRUE1 1 |
2574 | #define ADV_FALSE0 0 |
2575 | #define ADV_NOERROR1 1 |
2576 | #define ADV_SUCCESS1 1 |
2577 | #define ADV_BUSY0 0 |
2578 | #define ADV_ERROR(-1) (-1) |
2579 | |
2580 | |
2581 | /* |
2582 | * ASC_DVC_VAR 'warn_code' values |
2583 | */ |
2584 | #define ASC_WARN_EEPROM_CHKSUM0x0002 0x0002 /* EEP check sum error */ |
2585 | #define ASC_WARN_EEPROM_TERMINATION0x0004 0x0004 /* EEP termination bad field */ |
2586 | #define ASC_WARN_SET_PCI_CONFIG_SPACE0x0080 0x0080 /* PCI config space set error */ |
2587 | #define ASC_WARN_ERROR0xFFFF 0xFFFF /* ADV_ERROR return */ |
2588 | |
2589 | #define ADV_MAX_TID15 15 /* max. target identifier */ |
2590 | #define ADV_MAX_LUN7 7 /* max. logical unit number */ |
2591 | |
2592 | |
2593 | /* |
2594 | * AscInitGetConfig() and AscInitAsc1000Driver() Definitions |
2595 | * |
2596 | * Error code values are set in ASC_DVC_VAR 'err_code'. |
2597 | */ |
2598 | #define ASC_IERR_WRITE_EEPROM0x0001 0x0001 /* write EEPROM error */ |
2599 | #define ASC_IERR_MCODE_CHKSUM0x0002 0x0002 /* micro code check sum error */ |
2600 | #define ASC_IERR_START_STOP_CHIP0x0008 0x0008 /* start/stop chip failed */ |
2601 | #define ASC_IERR_CHIP_VERSION0x0040 0x0040 /* wrong chip version */ |
2602 | #define ASC_IERR_SET_SCSI_ID0x0080 0x0080 /* set SCSI ID failed */ |
2603 | #define ASC_IERR_BAD_SIGNATURE0x0200 0x0200 /* signature not found */ |
2604 | #define ASC_IERR_ILLEGAL_CONNECTION0x0400 0x0400 /* Illegal cable connection */ |
2605 | #define ASC_IERR_SINGLE_END_DEVICE0x0800 0x0800 /* Single-end used w/differential */ |
2606 | #define ASC_IERR_REVERSED_CABLE0x1000 0x1000 /* Narrow flat cable reversed */ |
2607 | #define ASC_IERR_RW_LRAM0x8000 0x8000 /* read/write local RAM error */ |
2608 | |
2609 | /* |
2610 | * Fixed locations of microcode operating variables. |
2611 | */ |
2612 | #define ASC_MC_CODE_BEGIN_ADDR0x0028 0x0028 /* microcode start address */ |
2613 | #define ASC_MC_CODE_END_ADDR0x002A 0x002A /* microcode end address */ |
2614 | #define ASC_MC_CODE_CHK_SUM0x002C 0x002C /* microcode code checksum */ |
2615 | #define ASC_MC_STACK_BEGIN0x002E 0x002E /* microcode stack begin */ |
2616 | #define ASC_MC_STACK_END0x0030 0x0030 /* microcode stack end */ |
2617 | #define ASC_MC_VERSION_DATE0x0038 0x0038 /* microcode version */ |
2618 | #define ASC_MC_VERSION_NUM0x003A 0x003A /* microcode number */ |
2619 | #define ASCV_VER_SERIAL_W0x003C 0x003C /* used in dos_init */ |
2620 | #define ASC_MC_BIOSMEM0x0040 0x0040 /* BIOS RISC Memory Start */ |
2621 | #define ASC_MC_BIOSLEN0x0050 0x0050 /* BIOS RISC Memory Length */ |
2622 | #define ASC_MC_HALTCODE0x0094 0x0094 /* microcode halt code */ |
2623 | #define ASC_MC_CALLERPC0x0096 0x0096 /* microcode halt caller PC */ |
2624 | #define ASC_MC_ADAPTER_SCSI_ID0x0098 0x0098 /* one ID byte + reserved */ |
2625 | #define ASC_MC_ULTRA_ABLE0x009C 0x009C |
2626 | #define ASC_MC_SDTR_ABLE0x009E 0x009E |
2627 | #define ASC_MC_TAGQNG_ABLE0x00A0 0x00A0 |
2628 | #define ASC_MC_DISC_ENABLE0x00A2 0x00A2 |
2629 | #define ASC_MC_IDLE_CMD0x00A6 0x00A6 |
2630 | #define ASC_MC_IDLE_PARA_STAT0x00A8 0x00A8 |
2631 | #define ASC_MC_DEFAULT_SCSI_CFG00x00AC 0x00AC |
2632 | #define ASC_MC_DEFAULT_SCSI_CFG10x00AE 0x00AE |
2633 | #define ASC_MC_DEFAULT_MEM_CFG0x00B0 0x00B0 |
2634 | #define ASC_MC_DEFAULT_SEL_MASK0x00B2 0x00B2 |
2635 | #define ASC_MC_RISC_NEXT_READY0x00B4 0x00B4 |
2636 | #define ASC_MC_RISC_NEXT_DONE0x00B5 0x00B5 |
2637 | #define ASC_MC_SDTR_DONE0x00B6 0x00B6 |
2638 | #define ASC_MC_NUMBER_OF_QUEUED_CMD0x00C0 0x00C0 |
2639 | #define ASC_MC_NUMBER_OF_MAX_CMD0x00D0 0x00D0 |
2640 | #define ASC_MC_DEVICE_HSHK_CFG_TABLE0x0100 0x0100 |
2641 | #define ASC_MC_WDTR_ABLE0x0120 0x0120 /* Wide Transfer TID bitmask. */ |
2642 | #define ASC_MC_CONTROL_FLAG0x0122 0x0122 /* Microcode control flag. */ |
2643 | #define ASC_MC_WDTR_DONE0x0124 0x0124 |
2644 | #define ASC_MC_HOST_NEXT_READY0x0128 0x0128 /* Host Next Ready RQL Entry. */ |
2645 | #define ASC_MC_HOST_NEXT_DONE0x0129 0x0129 /* Host Next Done RQL Entry. */ |
2646 | |
2647 | /* |
2648 | * BIOS LRAM variable absolute offsets. |
2649 | */ |
2650 | #define BIOS_CODESEG0x54 0x54 |
2651 | #define BIOS_CODELEN0x56 0x56 |
2652 | #define BIOS_SIGNATURE0x58 0x58 |
2653 | #define BIOS_VERSION0x5A 0x5A |
2654 | #define BIOS_SIGNATURE0x58 0x58 |
2655 | |
2656 | /* |
2657 | * Microcode Control Flags |
2658 | * |
2659 | * Flags set by the Adv Library in RISC variable 'control_flag' (0x122) |
2660 | * and handled by the microcode. |
2661 | */ |
2662 | #define CONTROL_FLAG_IGNORE_PERR0x0001 0x0001 /* Ignore DMA Parity Errors */ |
2663 | |
2664 | /* |
2665 | * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format |
2666 | */ |
2667 | #define HSHK_CFG_WIDE_XFR0x8000 0x8000 |
2668 | #define HSHK_CFG_RATE0x0F00 0x0F00 |
2669 | #define HSHK_CFG_OFFSET0x001F 0x001F |
2670 | |
2671 | /* |
2672 | * LRAM RISC Queue Lists (LRAM addresses 0x1200 - 0x19FF) |
2673 | * |
2674 | * Each of the 255 Adv Library/Microcode RISC queue lists or mailboxes |
2675 | * starting at LRAM address 0x1200 is 8 bytes and has the following |
2676 | * structure. Only 253 of these are actually used for command queues. |
2677 | */ |
2678 | |
2679 | #define ASC_MC_RISC_Q_LIST_BASE0x1200 0x1200 |
2680 | #define ASC_MC_RISC_Q_LIST_SIZE0x0008 0x0008 |
2681 | #define ASC_MC_RISC_Q_TOTAL_CNT0x00FF 0x00FF /* Num. queue slots in LRAM. */ |
2682 | #define ASC_MC_RISC_Q_FIRST0x0001 0x0001 |
2683 | #define ASC_MC_RISC_Q_LAST0x00FF 0x00FF |
2684 | |
2685 | #define ASC_DEF_MAX_HOST_QNG0xFD 0xFD /* Max. number of host commands (253) */ |
2686 | #define ASC_DEF_MIN_HOST_QNG0x10 0x10 /* Min. number of host commands (16) */ |
2687 | #define ASC_DEF_MAX_DVC_QNG0x3F 0x3F /* Max. number commands per device (63) */ |
2688 | #define ASC_DEF_MIN_DVC_QNG0x04 0x04 /* Min. number commands per device (4) */ |
2689 | |
2690 | /* RISC Queue List structure - 8 bytes */ |
2691 | #define RQL_FWD0 0 /* forward pointer (1 byte) */ |
2692 | #define RQL_BWD1 1 /* backward pointer (1 byte) */ |
2693 | #define RQL_STATE2 2 /* state byte - free, ready, done, aborted (1 byte) */ |
2694 | #define RQL_TID3 3 /* request target id (1 byte) */ |
2695 | #define RQL_PHYADDR4 4 /* request physical pointer (4 bytes) */ |
2696 | |
2697 | /* RISC Queue List state values */ |
2698 | #define ASC_MC_QS_FREE0x00 0x00 |
2699 | #define ASC_MC_QS_READY0x01 0x01 |
2700 | #define ASC_MC_QS_DONE0x40 0x40 |
2701 | #define ASC_MC_QS_ABORTED0x80 0x80 |
2702 | |
2703 | /* RISC Queue List pointer values */ |
2704 | #define ASC_MC_NULL_Q0x00 0x00 /* NULL_Q == 0 */ |
2705 | #define ASC_MC_BIOS_Q0xFF 0xFF /* BIOS_Q = 255 */ |
2706 | |
2707 | /* ASC_SCSI_REQ_Q 'cntl' field values */ |
2708 | #define ASC_MC_QC_START_MOTOR0x02 0x02 /* Issue start motor. */ |
2709 | #define ASC_MC_QC_NO_OVERRUN0x04 0x04 /* Don't report overrun. */ |
2710 | #define ASC_MC_QC_FIRST_DMA0x08 0x08 /* Internal microcode flag. */ |
2711 | #define ASC_MC_QC_ABORTED0x10 0x10 /* Request aborted by host. */ |
2712 | #define ASC_MC_QC_REQ_SENSE0x20 0x20 /* Auto-Request Sense. */ |
2713 | #define ASC_MC_QC_DOS_REQ0x80 0x80 /* Request issued by DOS. */ |
2714 | |
2715 | |
2716 | /* |
2717 | * ASC_SCSI_REQ_Q 'a_flag' definitions |
2718 | * |
2719 | * The Adv Library should limit use to the lower nibble (4 bits) of |
2720 | * a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag. |
2721 | */ |
2722 | #define ADV_POLL_REQUEST0x01 0x01 /* poll for request completion */ |
2723 | #define ADV_SCSIQ_DONE0x02 0x02 /* request done */ |
2724 | |
2725 | /* |
2726 | * Adapter temporary configuration structure |
2727 | * |
2728 | * This structure can be discarded after initialization. Don't add |
2729 | * fields here needed after initialization. |
2730 | * |
2731 | * Field naming convention: |
2732 | * |
2733 | * *_enable indicates the field enables or disables a feature. The |
2734 | * value of the field is never reset. |
2735 | */ |
2736 | typedef struct adv_dvc_cfg { |
2737 | ushort disc_enable; /* enable disconnection */ |
2738 | uchar chip_version; /* chip version */ |
2739 | uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */ |
2740 | ushort pci_device_id; /* PCI device code number */ |
2741 | ushort lib_version; /* Adv Library version number */ |
2742 | ushort control_flag; /* Microcode Control Flag */ |
2743 | ushort mcode_date; /* Microcode date */ |
2744 | ushort mcode_version; /* Microcode version */ |
2745 | ushort pci_slot_info; /* high byte device/function number */ |
2746 | /* bits 7-3 device num., bits 2-0 function num. */ |
2747 | /* low byte bus num. */ |
2748 | ushort bios_boot_wait; /* BIOS boot time delay */ |
2749 | ushort serial1; /* EEPROM serial number word 1 */ |
2750 | ushort serial2; /* EEPROM serial number word 2 */ |
2751 | ushort serial3; /* EEPROM serial number word 3 */ |
2752 | } ADV_DVC_CFG; |
2753 | |
2754 | /* |
2755 | * Adapter operation variable structure. |
2756 | * |
2757 | * One structure is required per host adapter. |
2758 | * |
2759 | * Field naming convention: |
2760 | * |
2761 | * *_able indicates both whether a feature should be enabled or disabled |
2762 | * and whether a device isi capable of the feature. At initialization |
2763 | * this field may be set, but later if a device is found to be incapable |
2764 | * of the feature, the field is cleared. |
2765 | */ |
2766 | typedef struct adv_dvc_var { |
2767 | AdvPortAddrunsigned long iop_base; /* I/O port address */ |
2768 | ushort err_code; /* fatal error code */ |
2769 | ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */ |
2770 | Ptr2Funculong isr_callback; /* pointer to function, called in AdvISR() */ |
2771 | Ptr2Funculong sbreset_callback; /* pointer to function, called in AdvISR() */ |
2772 | ushort wdtr_able; /* try WDTR for a device */ |
2773 | ushort sdtr_able; /* try SDTR for a device */ |
2774 | ushort ultra_able; /* try SDTR Ultra speed for a device */ |
2775 | ushort tagqng_able; /* try tagged queuing with a device */ |
2776 | uchar max_dvc_qng; /* maximum number of tagged commands per device */ |
2777 | ushort start_motor; /* start motor command allowed */ |
2778 | uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */ |
2779 | uchar chip_no; /* should be assigned by caller */ |
2780 | uchar max_host_qng; /* maximum number of Q'ed command allowed */ |
2781 | uchar cur_host_qng; /* total number of queue command */ |
2782 | uchar irq_no; /* IRQ number */ |
2783 | ushort no_scam; /* scam_tolerant of EEPROM */ |
2784 | ushort idle_cmd_done; /* microcode idle command done set by AdvISR() */ |
2785 | ulong drv_ptr; /* driver pointer to private structure */ |
2786 | uchar chip_scsi_id; /* chip SCSI target ID */ |
2787 | /* |
2788 | * Note: The following fields will not be used after initialization. The |
2789 | * driver may discard the buffer after initialization is done. |
2790 | */ |
2791 | ADV_DVC_CFG *cfg; /* temporary configuration structure */ |
2792 | } ADV_DVC_VAR; |
2793 | |
2794 | #define NO_OF_SG_PER_BLOCK15 15 |
2795 | |
2796 | typedef struct asc_sg_block { |
2797 | uchar reserved1; |
2798 | uchar reserved2; |
2799 | uchar first_entry_no; /* starting entry number */ |
2800 | uchar last_entry_no; /* last entry number */ |
2801 | struct asc_sg_block *sg_ptr; /* links to the next sg block */ |
2802 | struct { |
2803 | ulong sg_addr; /* SG element address */ |
2804 | ulong sg_count; /* SG element count */ |
2805 | } sg_list[NO_OF_SG_PER_BLOCK15]; |
2806 | } ADV_SG_BLOCK; |
2807 | |
2808 | /* |
2809 | * ASC_SCSI_REQ_Q - microcode request structure |
2810 | * |
2811 | * All fields in this structure up to byte 60 are used by the microcode. |
2812 | * The microcode makes assumptions about the size and ordering of fields |
2813 | * in this structure. Do not change the structure definition here without |
2814 | * coordinating the change with the microcode. |
2815 | */ |
2816 | typedef struct adv_scsi_req_q { |
2817 | uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */ |
2818 | uchar sg_entry_cnt; /* SG element count. Zero for no SG. */ |
2819 | uchar target_id; /* Device target identifier. */ |
2820 | uchar target_lun; /* Device target logical unit number. */ |
2821 | ulong data_addr; /* Data buffer physical address. */ |
2822 | ulong data_cnt; /* Data count. Ucode sets to residual. */ |
2823 | ulong sense_addr; /* Sense buffer physical address. */ |
2824 | ulong srb_ptr; /* Driver request pointer. */ |
2825 | uchar a_flag; /* Adv Library flag field. */ |
2826 | uchar sense_len; /* Auto-sense length. Ucode sets to residual. */ |
2827 | uchar cdb_len; /* SCSI CDB length. */ |
2828 | uchar tag_code; /* SCSI-2 Tag Queue Code: 00, 20-22. */ |
2829 | uchar done_status; /* Completion status. */ |
2830 | uchar scsi_status; /* SCSI status byte. */ |
2831 | uchar host_status; /* Ucode host status. */ |
2832 | uchar ux_sg_ix; /* Ucode working SG variable. */ |
2833 | uchar cdb[12]; /* SCSI command block. */ |
2834 | ulong sg_real_addr; /* SG list physical address. */ |
2835 | struct adv_scsi_req_q *free_scsiq_link; |
2836 | ulong ux_wk_data_cnt; /* Saved data count at disconnection. */ |
2837 | struct adv_scsi_req_q *scsiq_ptr; |
2838 | ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */ |
2839 | /* |
2840 | * End of microcode structure - 60 bytes. The rest of the structure |
2841 | * is used by the Adv Library and ignored by the microcode. |
2842 | */ |
2843 | ulong vsense_addr; /* Sense buffer virtual address. */ |
2844 | ulong vdata_addr; /* Data buffer virtual address. */ |
2845 | uchar orig_sense_len; /* Original length of sense buffer. */ |
2846 | } ADV_SCSI_REQ_Q; /* BIOS - 70 bytes, DOS - 76 bytes, W95, WNT - 69 bytes */ |
2847 | |
2848 | /* |
2849 | * Microcode idle loop commands |
2850 | */ |
2851 | #define IDLE_CMD_COMPLETED0 0 |
2852 | #define IDLE_CMD_STOP_CHIP0x0001 0x0001 |
2853 | #define IDLE_CMD_STOP_CHIP_SEND_INT0x0002 0x0002 |
2854 | #define IDLE_CMD_SEND_INT0x0004 0x0004 |
2855 | #define IDLE_CMD_ABORT0x0008 0x0008 |
2856 | #define IDLE_CMD_DEVICE_RESET0x0010 0x0010 |
2857 | #define IDLE_CMD_SCSI_RESET0x0020 0x0020 |
2858 | |
2859 | /* |
2860 | * AdvSendIdleCmd() flag definitions. |
2861 | */ |
2862 | #define ADV_NOWAIT0x01 0x01 |
2863 | |
2864 | /* |
2865 | * Wait loop time out values. |
2866 | */ |
2867 | #define SCSI_WAIT_10_SEC10 10 /* 10 seconds */ |
2868 | #define SCSI_MS_PER_SEC1000 1000 /* milliseconds per second */ |
2869 | |
2870 | /* |
2871 | * Device drivers must define the following functions. |
2872 | */ |
2873 | STATICstatic long DvcEnterCritical(void); |
2874 | STATICstatic void DvcLeaveCritical(long); |
2875 | STATICstatic void DvcSleepMilliSecond(ulong); |
2876 | STATICstatic uchar DvcAdvReadPCIConfigByte(ADV_DVC_VAR *, ushort); |
2877 | STATICstatic void DvcAdvWritePCIConfigByte(ADV_DVC_VAR *, ushort, uchar); |
2878 | STATICstatic ulong DvcGetPhyAddr(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *, |
2879 | uchar *, long *, int); |
2880 | STATICstatic void DvcDelayMicroSecond(ADV_DVC_VAR *, ushort); |
2881 | |
2882 | /* |
2883 | * Adv Library functions available to drivers. |
2884 | */ |
2885 | STATICstatic int AdvExeScsiQueue(ADV_DVC_VAR *, |
2886 | ADV_SCSI_REQ_Q *); |
2887 | STATICstatic int AdvISR(ADV_DVC_VAR *); |
2888 | STATICstatic int AdvInitGetConfig(ADV_DVC_VAR *); |
2889 | STATICstatic int AdvInitAsc3550Driver(ADV_DVC_VAR *); |
2890 | STATICstatic int AdvResetSB(ADV_DVC_VAR *); |
2891 | |
2892 | /* |
2893 | * Internal Adv Library functions. |
2894 | */ |
2895 | STATICstatic int AdvSendIdleCmd(ADV_DVC_VAR *, ushort, ulong, int); |
2896 | STATICstatic void AdvResetChip(ADV_DVC_VAR *); |
2897 | STATICstatic int AdvSendScsiCmd(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *); |
2898 | STATICstatic void AdvInquiryHandling(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *); |
2899 | STATICstatic int AdvInitFromEEP(ADV_DVC_VAR *); |
2900 | STATICstatic ushort AdvGetEEPConfig(AdvPortAddrunsigned long, ADVEEP_CONFIG *); |
2901 | STATICstatic void AdvSetEEPConfig(AdvPortAddrunsigned long, ADVEEP_CONFIG *); |
2902 | STATICstatic void AdvWaitEEPCmd(AdvPortAddrunsigned long); |
2903 | STATICstatic ushort AdvReadEEPWord(AdvPortAddrunsigned long, int); |
2904 | STATICstatic void AdvResetSCSIBus(ADV_DVC_VAR *); |
2905 | |
2906 | /* |
2907 | * PCI Bus Definitions |
2908 | */ |
2909 | #define AscPCICmdRegBits_BusMastering0x0007 0x0007 |
2910 | #define AscPCICmdRegBits_ParErrRespCtrl0x0040 0x0040 |
2911 | |
2912 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
2913 | |
2914 | /* Read byte from a register. */ |
2915 | #define AdvReadByteRegister(iop_base, reg_off)((*(volatile unsigned char *) ((iop_base) + (reg_off)))) \ |
2916 | (inp((iop_base) + (reg_off))((__builtin_constant_p(((iop_base) + (reg_off))) && ( (iop_base) + (reg_off)) < 256) ? __inbc((iop_base) + (reg_off )) : __inb((iop_base) + (reg_off)))) |
2917 | |
2918 | /* Write byte to a register. */ |
2919 | #define AdvWriteByteRegister(iop_base, reg_off, byte)(((*(volatile unsigned char *) ((iop_base) + (reg_off))) = (( byte)))) \ |
2920 | (outp((iop_base) + (reg_off), (byte))((__builtin_constant_p((((iop_base) + (reg_off)))) && (((iop_base) + (reg_off))) < 256) ? __outbc((((byte))),(( (iop_base) + (reg_off)))) : __outb((((byte))),(((iop_base) + ( reg_off)))))) |
2921 | |
2922 | /* Read word (2 bytes) from a register. */ |
2923 | #define AdvReadWordRegister(iop_base, reg_off)((*(volatile unsigned short *) ((iop_base) + (reg_off)))) \ |
2924 | (inpw((iop_base) + (reg_off))((__builtin_constant_p(((iop_base) + (reg_off))) && ( (iop_base) + (reg_off)) < 256) ? __inwc((iop_base) + (reg_off )) : __inw((iop_base) + (reg_off)))) |
2925 | |
2926 | /* Write word (2 bytes) to a register. */ |
2927 | #define AdvWriteWordRegister(iop_base, reg_off, word)(((*(volatile unsigned short *) ((iop_base) + (reg_off))) = ( (word)))) \ |
2928 | (outpw((iop_base) + (reg_off), (word))((__builtin_constant_p((((iop_base) + (reg_off)))) && (((iop_base) + (reg_off))) < 256) ? __outwc((((word))),(( (iop_base) + (reg_off)))) : __outw((((word))),(((iop_base) + ( reg_off)))))) |
2929 | |
2930 | /* Read byte from LRAM. */ |
2931 | #define AdvReadByteLram(iop_base, addr, byte)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( addr))); (byte) = (*(volatile unsigned char *) ((iop_base) + 0x06 )); } while (0) \ |
2932 | do { \ |
2933 | outpw((iop_base) + IOPW_RAM_ADDR, (addr))((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr))),(((iop_base) + 0x04 ))) : __outw((((addr))),(((iop_base) + 0x04)))); \ |
2934 | (byte) = inp((iop_base) + IOPB_RAM_DATA)((__builtin_constant_p(((iop_base) + 0x06)) && ((iop_base ) + 0x06) < 256) ? __inbc((iop_base) + 0x06) : __inb((iop_base ) + 0x06)); \ |
2935 | } while (0) |
2936 | |
2937 | /* Write byte to LRAM. */ |
2938 | #define AdvWriteByteLram(iop_base, addr, byte)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((byte )))) \ |
2939 | (outpw((iop_base) + IOPW_RAM_ADDR, (addr))((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr))),(((iop_base) + 0x04 ))) : __outw((((addr))),(((iop_base) + 0x04)))), \ |
2940 | outp((iop_base) + IOPB_RAM_DATA, (byte))((__builtin_constant_p((((iop_base) + 0x06))) && (((iop_base ) + 0x06)) < 256) ? __outbc((((byte))),(((iop_base) + 0x06 ))) : __outb((((byte))),(((iop_base) + 0x06))))) |
2941 | |
2942 | /* Read word (2 bytes) from LRAM. */ |
2943 | #define AdvReadWordLram(iop_base, addr, word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( addr))); (word) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0) \ |
2944 | do { \ |
2945 | outpw((iop_base) + IOPW_RAM_ADDR, (addr))((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr))),(((iop_base) + 0x04 ))) : __outw((((addr))),(((iop_base) + 0x04)))); \ |
2946 | (word) = inpw((iop_base) + IOPW_RAM_DATA)((__builtin_constant_p(((iop_base) + 0x06)) && ((iop_base ) + 0x06) < 256) ? __inwc((iop_base) + 0x06) : __inw((iop_base ) + 0x06)); \ |
2947 | } while (0) |
2948 | |
2949 | /* Write word (2 bytes) to LRAM. */ |
2950 | #define AdvWriteWordLram(iop_base, addr, word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( word)))) \ |
2951 | (outpw((iop_base) + IOPW_RAM_ADDR, (addr))((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr))),(((iop_base) + 0x04 ))) : __outw((((addr))),(((iop_base) + 0x04)))), \ |
2952 | outpw((iop_base) + IOPW_RAM_DATA, (word))((__builtin_constant_p((((iop_base) + 0x06))) && (((iop_base ) + 0x06)) < 256) ? __outwc((((word))),(((iop_base) + 0x06 ))) : __outw((((word))),(((iop_base) + 0x06))))) |
2953 | |
2954 | /* Write double word (4 bytes) to LRAM */ |
2955 | /* Because of unspecified C language ordering don't use auto-increment. */ |
2956 | #define AdvWriteDWordLram(iop_base, addr, dword)((((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( ushort) ((dword) & 0xFFFF)))), (((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) + 2)), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort) ((dword >> 16 ) & 0xFFFF))))) \ |
2957 | ((outpw((iop_base) + IOPW_RAM_ADDR, (addr))((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr))),(((iop_base) + 0x04 ))) : __outw((((addr))),(((iop_base) + 0x04)))), \ |
2958 | outpw((iop_base) + IOPW_RAM_DATA, (ushort) ((dword) & 0xFFFF))((__builtin_constant_p((((iop_base) + 0x06))) && (((iop_base ) + 0x06)) < 256) ? __outwc((((ushort) ((dword) & 0xFFFF ))),(((iop_base) + 0x06))) : __outw((((ushort) ((dword) & 0xFFFF))),(((iop_base) + 0x06))))), \ |
2959 | (outpw((iop_base) + IOPW_RAM_ADDR, (addr) + 2)((__builtin_constant_p((((iop_base) + 0x04))) && (((iop_base ) + 0x04)) < 256) ? __outwc((((addr) + 2)),(((iop_base) + 0x04 ))) : __outw((((addr) + 2)),(((iop_base) + 0x04)))), \ |
2960 | outpw((iop_base) + IOPW_RAM_DATA, (ushort) ((dword >> 16) & 0xFFFF))((__builtin_constant_p((((iop_base) + 0x06))) && (((iop_base ) + 0x06)) < 256) ? __outwc((((ushort) ((dword >> 16 ) & 0xFFFF))),(((iop_base) + 0x06))) : __outw((((ushort) ( (dword >> 16) & 0xFFFF))),(((iop_base) + 0x06)))))) |
2961 | |
2962 | /* Read word (2 bytes) from LRAM assuming that the address is already set. */ |
2963 | #define AdvReadWordAutoIncLram(iop_base)((*(volatile unsigned short *) ((iop_base) + 0x06))) \ |
2964 | (inpw((iop_base) + IOPW_RAM_DATA)((__builtin_constant_p(((iop_base) + 0x06)) && ((iop_base ) + 0x06) < 256) ? __inwc((iop_base) + 0x06) : __inw((iop_base ) + 0x06))) |
2965 | |
2966 | /* Write word (2 bytes) to LRAM assuming that the address is already set. */ |
2967 | #define AdvWriteWordAutoIncLram(iop_base, word)(((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((word )))) \ |
2968 | (outpw((iop_base) + IOPW_RAM_DATA, (word))((__builtin_constant_p((((iop_base) + 0x06))) && (((iop_base ) + 0x06)) < 256) ? __outwc((((word))),(((iop_base) + 0x06 ))) : __outw((((word))),(((iop_base) + 0x06))))) |
2969 | |
2970 | #else /* version >= v1,3,0 */ |
2971 | |
2972 | /* Read byte from a register. */ |
2973 | #define AdvReadByteRegister(iop_base, reg_off)((*(volatile unsigned char *) ((iop_base) + (reg_off)))) \ |
2974 | (ADV_MEM_READB((iop_base) + (reg_off))(*(volatile unsigned char *) ((iop_base) + (reg_off)))) |
2975 | |
2976 | /* Write byte to a register. */ |
2977 | #define AdvWriteByteRegister(iop_base, reg_off, byte)(((*(volatile unsigned char *) ((iop_base) + (reg_off))) = (( byte)))) \ |
2978 | (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte))((*(volatile unsigned char *) ((iop_base) + (reg_off))) = ((byte )))) |
2979 | |
2980 | /* Read word (2 bytes) from a register. */ |
2981 | #define AdvReadWordRegister(iop_base, reg_off)((*(volatile unsigned short *) ((iop_base) + (reg_off)))) \ |
2982 | (ADV_MEM_READW((iop_base) + (reg_off))(*(volatile unsigned short *) ((iop_base) + (reg_off)))) |
2983 | |
2984 | /* Write word (2 bytes) to a register. */ |
2985 | #define AdvWriteWordRegister(iop_base, reg_off, word)(((*(volatile unsigned short *) ((iop_base) + (reg_off))) = ( (word)))) \ |
2986 | (ADV_MEM_WRITEW((iop_base) + (reg_off), (word))((*(volatile unsigned short *) ((iop_base) + (reg_off))) = (( word)))) |
2987 | |
2988 | /* Read byte from LRAM. */ |
2989 | #define AdvReadByteLram(iop_base, addr, byte)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( addr))); (byte) = (*(volatile unsigned char *) ((iop_base) + 0x06 )); } while (0) \ |
2990 | do { \ |
2991 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr))((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) )); \ |
2992 | (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA)(*(volatile unsigned char *) ((iop_base) + 0x06)); \ |
2993 | } while (0) |
2994 | |
2995 | /* Write byte to LRAM. */ |
2996 | #define AdvWriteByteLram(iop_base, addr, byte)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((byte )))) \ |
2997 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr))((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) )), \ |
2998 | ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte))((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((byte)) )) |
2999 | |
3000 | /* Read word (2 bytes) from LRAM. */ |
3001 | #define AdvReadWordLram(iop_base, addr, word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( addr))); (word) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0) \ |
3002 | do { \ |
3003 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr))((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) )); \ |
3004 | (word) = ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)(*(volatile unsigned short *) ((iop_base) + 0x06)); \ |
3005 | } while (0) |
3006 | |
3007 | /* Write word (2 bytes) to LRAM. */ |
3008 | #define AdvWriteWordLram(iop_base, addr, word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( word)))) \ |
3009 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr))((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) )), \ |
3010 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((word) ))) |
3011 | |
3012 | /* Write double word (4 bytes) to LRAM */ |
3013 | /* Because of unspecified C language ordering don't use auto-increment. */ |
3014 | #define AdvWriteDWordLram(iop_base, addr, dword)((((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( ushort) ((dword) & 0xFFFF)))), (((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) + 2)), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort) ((dword >> 16 ) & 0xFFFF))))) \ |
3015 | ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr))((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) )), \ |
3016 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort ) ((dword) & 0xFFFF))) |
3017 | (ushort) ((dword) & 0xFFFF))((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort ) ((dword) & 0xFFFF)))), \ |
3018 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2)((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((addr) + 2)), \ |
3019 | ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort ) ((dword >> 16) & 0xFFFF))) |
3020 | (ushort) ((dword >> 16) & 0xFFFF))((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort ) ((dword >> 16) & 0xFFFF))))) |
3021 | |
3022 | /* Read word (2 bytes) from LRAM assuming that the address is already set. */ |
3023 | #define AdvReadWordAutoIncLram(iop_base)((*(volatile unsigned short *) ((iop_base) + 0x06))) \ |
3024 | (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)(*(volatile unsigned short *) ((iop_base) + 0x06))) |
3025 | |
3026 | /* Write word (2 bytes) to LRAM assuming that the address is already set. */ |
3027 | #define AdvWriteWordAutoIncLram(iop_base, word)(((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((word )))) \ |
3028 | (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((word) ))) |
3029 | |
3030 | #endif /* version >= v1,3,0 */ |
3031 | |
3032 | /* |
3033 | * Define macro to check for Condor signature. |
3034 | * |
3035 | * Evaluate to ADV_TRUE if a Condor chip is found the specified port |
3036 | * address 'iop_base'. Otherwise evalue to ADV_FALSE. |
3037 | */ |
3038 | #define AdvFindSignature(iop_base)(((((*(volatile unsigned char *) (((iop_base)) + (0x01)))) == 0x25) && (((*(volatile unsigned short *) (((iop_base )) + (0x00)))) == 0x04C1)) ? 1 : 0) \ |
3039 | (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1)((*(volatile unsigned char *) (((iop_base)) + (0x01)))) == \ |
3040 | ADV_CHIP_ID_BYTE0x25) && \ |
3041 | (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0)((*(volatile unsigned short *) (((iop_base)) + (0x00)))) == \ |
3042 | ADV_CHIP_ID_WORD0x04C1)) ? ADV_TRUE1 : ADV_FALSE0) |
3043 | |
3044 | /* |
3045 | * Define macro to Return the version number of the chip at 'iop_base'. |
3046 | * |
3047 | * The second parameter 'bus_type' is currently unused. |
3048 | */ |
3049 | #define AdvGetChipVersion(iop_base, bus_type)((*(volatile unsigned char *) (((iop_base)) + (0x03)))) \ |
3050 | AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV)((*(volatile unsigned char *) (((iop_base)) + (0x03)))) |
3051 | |
3052 | /* |
3053 | * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must |
3054 | * match the ASC_SCSI_REQ_Q 'srb_ptr' field. |
3055 | * |
3056 | * If the request has not yet been sent to the device it will simply be |
3057 | * aborted from RISC memory. If the request is disconnected it will be |
3058 | * aborted on reselection by sending an Abort Message to the target ID. |
3059 | * |
3060 | * Return value: |
3061 | * ADV_TRUE(1) - Queue was successfully aborted. |
3062 | * ADV_FALSE(0) - Queue was not found on the active queue list. |
3063 | */ |
3064 | #define AdvAbortSRB(asc_dvc, srb_ptr)AdvSendIdleCmd((asc_dvc), (ushort) 0x0008, (ulong) (srb_ptr), 0) \ |
3065 | AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT0x0008, \ |
3066 | (ulong) (srb_ptr), 0) |
3067 | |
3068 | /* |
3069 | * Send a Bus Device Reset Message to the specified target ID. |
3070 | * |
3071 | * All outstanding commands will be purged if sending the |
3072 | * Bus Device Reset Message is successful. |
3073 | * |
3074 | * Return Value: |
3075 | * ADV_TRUE(1) - All requests on the target are purged. |
3076 | * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests |
3077 | * are not purged. |
3078 | */ |
3079 | #define AdvResetDevice(asc_dvc, target_id)AdvSendIdleCmd((asc_dvc), (ushort) 0x0010, (ulong) (target_id ), 0) \ |
3080 | AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET0x0010, \ |
3081 | (ulong) (target_id), 0) |
3082 | |
3083 | /* |
3084 | * SCSI Wide Type definition. |
3085 | */ |
3086 | #define ADV_SCSI_BIT_ID_TYPEushort ushort |
3087 | |
3088 | /* |
3089 | * AdvInitScsiTarget() 'cntl_flag' options. |
3090 | */ |
3091 | #define ADV_SCAN_LUN0x01 0x01 |
3092 | #define ADV_CAPINFO_NOLUN0x02 0x02 |
3093 | |
3094 | /* |
3095 | * Convert target id to target id bit mask. |
3096 | */ |
3097 | #define ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)) (0x01 << ((tid) & ADV_MAX_TID15)) |
3098 | |
3099 | /* |
3100 | * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values. |
3101 | */ |
3102 | |
3103 | #define QD_NO_STATUS0x00 0x00 /* Request not completed yet. */ |
3104 | #define QD_NO_ERROR0x01 0x01 |
3105 | #define QD_ABORTED_BY_HOST0x02 0x02 |
3106 | #define QD_WITH_ERROR0x04 0x04 |
3107 | |
3108 | #define QHSTA_NO_ERROR0x00 0x00 |
3109 | #define QHSTA_M_SEL_TIMEOUT0x11 0x11 |
3110 | #define QHSTA_M_DATA_OVER_RUN0x12 0x12 |
3111 | #define QHSTA_M_UNEXPECTED_BUS_FREE0x13 0x13 |
3112 | #define QHSTA_M_QUEUE_ABORTED0x15 0x15 |
3113 | #define QHSTA_M_SXFR_SDMA_ERR0x16 0x16 /* SXFR_STATUS SCSI DMA Error */ |
3114 | #define QHSTA_M_SXFR_SXFR_PERR0x17 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ |
3115 | #define QHSTA_M_RDMA_PERR0x18 0x18 /* RISC PCI DMA parity error */ |
3116 | #define QHSTA_M_SXFR_OFF_UFLW0x19 0x19 /* SXFR_STATUS Offset Underflow */ |
3117 | #define QHSTA_M_SXFR_OFF_OFLW0x20 0x20 /* SXFR_STATUS Offset Overflow */ |
3118 | #define QHSTA_M_SXFR_WD_TMO0x21 0x21 /* SXFR_STATUS Watchdog Timeout */ |
3119 | #define QHSTA_M_SXFR_DESELECTED0x22 0x22 /* SXFR_STATUS Deselected */ |
3120 | /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ |
3121 | #define QHSTA_M_SXFR_XFR_OFLW0x12 0x12 /* SXFR_STATUS Transfer Overflow */ |
3122 | #define QHSTA_M_SXFR_XFR_PH_ERR0x24 0x24 /* SXFR_STATUS Transfer Phase Error */ |
3123 | #define QHSTA_M_SXFR_UNKNOWN_ERROR0x25 0x25 /* SXFR_STATUS Unknown Error */ |
3124 | #define QHSTA_M_WTM_TIMEOUT0x41 0x41 |
3125 | #define QHSTA_M_BAD_CMPL_STATUS_IN0x42 0x42 |
3126 | #define QHSTA_M_NO_AUTO_REQ_SENSE0x43 0x43 |
3127 | #define QHSTA_M_AUTO_REQ_SENSE_FAIL0x44 0x44 |
3128 | #define QHSTA_M_INVALID_DEVICE0x45 0x45 /* Bad target ID */ |
3129 | |
3130 | typedef int (* ADV_ISR_CALLBACK) |
3131 | (ADV_DVC_VAR *, ADV_SCSI_REQ_Q *); |
3132 | |
3133 | typedef int (* ADV_SBRESET_CALLBACK) |
3134 | (ADV_DVC_VAR *); |
3135 | |
3136 | /* |
3137 | * Default EEPROM Configuration structure defined in a_init.c. |
3138 | */ |
3139 | STATICstatic ADVEEP_CONFIG Default_EEPROM_Config; |
3140 | |
3141 | /* |
3142 | * DvcGetPhyAddr() flag arguments |
3143 | */ |
3144 | #define ADV_IS_SCSIQ_FLAG0x01 0x01 /* 'addr' is ASC_SCSI_REQ_Q pointer */ |
3145 | #define ADV_ASCGETSGLIST_VADDR0x02 0x02 /* 'addr' is AscGetSGList() virtual addr */ |
3146 | #define ADV_IS_SENSE_FLAG0x04 0x04 /* 'addr' is sense virtual pointer */ |
3147 | #define ADV_IS_DATA_FLAG0x08 0x08 /* 'addr' is data virtual pointer */ |
3148 | #define ADV_IS_SGLIST_FLAG0x10 0x10 /* 'addr' is sglist virtual pointer */ |
3149 | |
3150 | /* Return the address that is aligned at the next doubleword >= to 'addr'. */ |
3151 | #define ADV_DWALIGN(addr)(((ulong) (addr) + 0x3) & ~0x3) (((ulong) (addr) + 0x3) & ~0x3) |
3152 | |
3153 | /* |
3154 | * Total contiguous memory needed for driver SG blocks. |
3155 | * |
3156 | * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum |
3157 | * number of scatter-gather elements the driver supports in a |
3158 | * single request. |
3159 | */ |
3160 | |
3161 | #ifndef ADV_MAX_SG_LIST64 |
3162 | Forced Error: Driver must define ADV_MAX_SG_LIST64. |
3163 | #endif /* ADV_MAX_SG_LIST */ |
3164 | |
3165 | #define ADV_SG_LIST_MAX_BYTE_SIZE(sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) \ |
3166 | (sizeof(ADV_SG_BLOCK) * \ |
3167 | ((ADV_MAX_SG_LIST64 + (NO_OF_SG_PER_BLOCK15 - 1))/NO_OF_SG_PER_BLOCK15)) |
3168 | |
3169 | /* |
3170 | * A driver may optionally define the assertion macro ADV_ASSERT() in |
3171 | * its d_os_dep.h file. If the macro has not already been defined, |
3172 | * then define the macro to a no-op. |
3173 | */ |
3174 | #ifndef ADV_ASSERT |
3175 | #define ADV_ASSERT(a){ if (!(a)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 3175); } } |
3176 | #endif /* ADV_ASSERT */ |
3177 | |
3178 | |
3179 | /* |
3180 | * --- Driver Constants and Macros |
3181 | */ |
3182 | |
3183 | #define ASC_NUM_BOARD_SUPPORTED16 16 |
3184 | #define ASC_NUM_IOPORT_PROBE4 4 |
3185 | #define ASC_NUM_BUS4 4 |
3186 | |
3187 | /* Reference Scsi_Host hostdata */ |
3188 | #define ASC_BOARDP(host)((asc_board_t *) &((host)->hostdata)) ((asc_board_t *) &((host)->hostdata)) |
3189 | |
3190 | /* asc_board_t flags */ |
3191 | #define ASC_HOST_IN_RESET0x01 0x01 |
3192 | #define ASC_HOST_IN_ABORT0x02 0x02 |
3193 | #define ASC_IS_WIDE_BOARD0x04 0x04 /* AdvanSys Wide Board */ |
3194 | #define ASC_SELECT_QUEUE_DEPTHS0x08 0x08 |
3195 | |
3196 | #define ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0) (((boardp)->flags & ASC_IS_WIDE_BOARD0x04) == 0) |
3197 | #define ASC_WIDE_BOARD(boardp)((boardp)->flags & 0x04) ((boardp)->flags & ASC_IS_WIDE_BOARD0x04) |
3198 | |
3199 | #define NO_ISA_DMA0xff 0xff /* No ISA DMA Channel Used */ |
3200 | |
3201 | /* |
3202 | * If the Linux kernel version supports freeing initialization code |
3203 | * and data after loading, define macros for this purpose. These macros |
3204 | * are not used when the driver is built as a module, cf. linux/init.h. |
3205 | */ |
3206 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,23)(((2) * 65536) + ((1) * 256) + (23)) |
3207 | #define ASC_INITFUNC(func)func func |
3208 | #define ASC_INITDATA |
3209 | #define ASC_INIT |
3210 | #else /* version >= v2.1.23 */ |
3211 | #define ASC_INITFUNC(func)func __initfunc(func) |
3212 | #define ASC_INITDATA __initdata |
3213 | #define ASC_INIT __init |
3214 | #endif /* version >= v2.1.23 */ |
3215 | |
3216 | #define ASC_INFO_SIZE128 128 /* advansys_info() line size */ |
3217 | |
3218 | /* /proc/scsi/advansys/[0...] related definitions */ |
3219 | #define ASC_PRTBUF_SIZE2048 2048 |
3220 | #define ASC_PRTLINE_SIZE160 160 |
3221 | |
3222 | #define ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; } \ |
3223 | if (cp) { \ |
3224 | totlen += len; \ |
3225 | leftlen -= len; \ |
3226 | if (leftlen == 0) { \ |
3227 | return totlen; \ |
3228 | } \ |
3229 | cp += len; \ |
3230 | } |
3231 | |
3232 | #define ASC_MIN(a, b)(((a) < (b)) ? (a) : (b)) (((a) < (b)) ? (a) : (b)) |
3233 | |
3234 | /* Asc Library return codes */ |
3235 | #define ASC_TRUE1 1 |
3236 | #define ASC_FALSE0 0 |
3237 | #define ASC_NOERROR1 1 |
3238 | #define ASC_BUSY0 0 |
3239 | #define ASC_ERROR(-1) (-1) |
3240 | |
3241 | /* Scsi_Cmnd function return codes */ |
3242 | #define STATUS_BYTE(byte)(byte) (byte) |
3243 | #define MSG_BYTE(byte)((byte) << 8) ((byte) << 8) |
3244 | #define HOST_BYTE(byte)((byte) << 16) ((byte) << 16) |
3245 | #define DRIVER_BYTE(byte)((byte) << 24) ((byte) << 24) |
3246 | |
3247 | /* |
3248 | * The following definitions and macros are OS independent interfaces to |
3249 | * the queue functions: |
3250 | * REQ - SCSI request structure |
3251 | * REQP - pointer to SCSI request structure |
3252 | * REQPTID(reqp) - reqp's target id |
3253 | * REQPNEXT(reqp) - reqp's next pointer |
3254 | * REQPNEXTP(reqp) - pointer to reqp's next pointer |
3255 | * REQPTIME(reqp) - reqp's time stamp value |
3256 | * REQTIMESTAMP() - system time stamp value |
3257 | */ |
3258 | typedef Scsi_Cmnd REQ, *REQP; |
3259 | #define REQPNEXT(reqp)((reqp)->host_scribble) ((reqp)->host_scribble) |
3260 | #define REQPNEXTP(reqp)((REQP *) &((reqp)->host_scribble)) ((REQP *) &((reqp)->host_scribble)) |
3261 | #define REQPTID(reqp)((reqp)->target) ((reqp)->target) |
3262 | #define REQPTIME(reqp)((reqp)->SCp.this_residual) ((reqp)->SCp.this_residual) |
3263 | #define REQTIMESTAMP()(jiffies) (jiffies) |
3264 | |
3265 | #define REQTIMESTAT(function, ascq, reqp, tid){ if (((reqp)->SCp.this_residual) <= (jiffies)) { ((reqp )->SCp.this_residual) = (jiffies) - ((reqp)->SCp.this_residual ); } else { { if (!(((reqp)->SCp.this_residual) <= (jiffies ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 3265); } }; ((reqp)->SCp.this_residual) = 0; } if (((ascq )->q_tot_cnt[tid] == 1) || (((reqp)->SCp.this_residual) < (ascq)->q_min_tim[tid])) { (ascq)->q_min_tim[tid] = ((reqp)->SCp.this_residual); ; } if (((reqp)->SCp.this_residual ) > (ascq)->q_max_tim[tid]) { (ascq)->q_max_tim[tid] = ((reqp)->SCp.this_residual); ; } (ascq)->q_tot_tim[tid ] += ((reqp)->SCp.this_residual); ((reqp)->SCp.this_residual ) = 0; } \ |
3266 | { \ |
3267 | /* |
3268 | * If the request time stamp is less than the system time stamp, then \ |
3269 | * maybe the system time stamp wrapped. Set the request time to zero.\ |
3270 | */ \ |
3271 | if (REQPTIME(reqp)((reqp)->SCp.this_residual) <= REQTIMESTAMP()(jiffies)) { \ |
3272 | REQPTIME(reqp)((reqp)->SCp.this_residual) = REQTIMESTAMP()(jiffies) - REQPTIME(reqp)((reqp)->SCp.this_residual); \ |
3273 | } else { \ |
3274 | /* Indicate an error occurred with the assertion. */ \ |
3275 | ASC_ASSERT(REQPTIME(reqp) <= REQTIMESTAMP()){ if (!(((reqp)->SCp.this_residual) <= (jiffies))) { printk ("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 3275); } }; \ |
3276 | REQPTIME(reqp)((reqp)->SCp.this_residual) = 0; \ |
3277 | } \ |
3278 | /* Handle first minimum time case without external initialization. */ \ |
3279 | if (((ascq)->q_tot_cnt[tid] == 1) || \ |
3280 | (REQPTIME(reqp)((reqp)->SCp.this_residual) < (ascq)->q_min_tim[tid])) { \ |
3281 | (ascq)->q_min_tim[tid] = REQPTIME(reqp)((reqp)->SCp.this_residual); \ |
3282 | ASC_DBG3(1, "%s: new q_min_tim[%d] %u\n", \ |
3283 | (function), (tid), (ascq)->q_min_tim[tid]); \ |
3284 | } \ |
3285 | if (REQPTIME(reqp)((reqp)->SCp.this_residual) > (ascq)->q_max_tim[tid]) { \ |
3286 | (ascq)->q_max_tim[tid] = REQPTIME(reqp)((reqp)->SCp.this_residual); \ |
3287 | ASC_DBG3(1, "%s: new q_max_tim[%d] %u\n", \ |
3288 | (function), tid, (ascq)->q_max_tim[tid]); \ |
3289 | } \ |
3290 | (ascq)->q_tot_tim[tid] += REQPTIME(reqp)((reqp)->SCp.this_residual); \ |
3291 | /* Reset the time stamp field. */ \ |
3292 | REQPTIME(reqp)((reqp)->SCp.this_residual) = 0; \ |
3293 | } |
3294 | |
3295 | /* asc_enqueue() flags */ |
3296 | #define ASC_FRONT1 1 |
3297 | #define ASC_BACK2 2 |
3298 | |
3299 | /* asc_dequeue_list() argument */ |
3300 | #define ASC_TID_ALL(-1) (-1) |
3301 | |
3302 | /* Return non-zero, if the queue is empty. */ |
3303 | #define ASC_QUEUE_EMPTY(ascq)((ascq)->q_tidmask == 0) ((ascq)->q_tidmask == 0) |
3304 | |
3305 | /* PCI configuration declarations */ |
3306 | |
3307 | #define PCI_BASE_CLASS_PREDEFINED0x00 0x00 |
3308 | #define PCI_BASE_CLASS_MASS_STORAGE0x01 0x01 |
3309 | #define PCI_BASE_CLASS_NETWORK0x02 0x02 |
3310 | #define PCI_BASE_CLASS_DISPLAY0x03 0x03 |
3311 | #define PCI_BASE_CLASS_MULTIMEDIA0x04 0x04 |
3312 | #define PCI_BASE_CLASS_MEMORY_CONTROLLER0x05 0x05 |
3313 | #define PCI_BASE_CLASS_BRIDGE_DEVICE0x06 0x06 |
3314 | |
3315 | /* MASS STORAGE */ |
3316 | #define PCI_SUB_CLASS_SCSI_CONTROLLER0x00 0x00 |
3317 | #define PCI_SUB_CLASS_IDE_CONTROLLER0x01 0x01 |
3318 | #define PCI_SUB_CLASS_FLOPPY_DISK_CONTROLLER0x02 0x02 |
3319 | #define PCI_SUB_CLASS_IPI_BUS_CONTROLLER0x03 0x03 |
3320 | #define PCI_SUB_CLASS_OTHER_MASS_CONTROLLER0x80 0x80 |
3321 | |
3322 | /* NETWORK CONTROLLER */ |
3323 | #define PCI_SUB_CLASS_ETHERNET_CONTROLLER0x00 0x00 |
3324 | #define PCI_SUB_CLASS_TOKEN_RING_CONTROLLER0x01 0x01 |
3325 | #define PCI_SUB_CLASS_FDDI_CONTROLLER0x02 0x02 |
3326 | #define PCI_SUB_CLASS_OTHER_NETWORK_CONTROLLER0x80 0x80 |
3327 | |
3328 | /* DISPLAY CONTROLLER */ |
3329 | #define PCI_SUB_CLASS_VGA_CONTROLLER0x00 0x00 |
3330 | #define PCI_SUB_CLASS_XGA_CONTROLLER0x01 0x01 |
3331 | #define PCI_SUB_CLASS_OTHER_DISPLAY_CONTROLLER0x80 0x80 |
3332 | |
3333 | /* MULTIMEDIA CONTROLLER */ |
3334 | #define PCI_SUB_CLASS_VIDEO_DEVICE0x00 0x00 |
3335 | #define PCI_SUB_CLASS_AUDIO_DEVICE0x01 0x01 |
3336 | #define PCI_SUB_CLASS_OTHER_MULTIMEDIA_DEVICE0x80 0x80 |
3337 | |
3338 | /* MEMORY CONTROLLER */ |
3339 | #define PCI_SUB_CLASS_RAM_CONTROLLER0x00 0x00 |
3340 | #define PCI_SUB_CLASS_FLASH_CONTROLLER0x01 0x01 |
3341 | #define PCI_SUB_CLASS_OTHER_MEMORY_CONTROLLER0x80 0x80 |
3342 | |
3343 | /* BRIDGE CONTROLLER */ |
3344 | #define PCI_SUB_CLASS_HOST_BRIDGE_CONTROLLER0x00 0x00 |
3345 | #define PCI_SUB_CLASS_ISA_BRIDGE_CONTROLLER0x01 0x01 |
3346 | #define PCI_SUB_CLASS_EISA_BRIDGE_CONTROLLER0x02 0x02 |
3347 | #define PCI_SUB_CLASS_MC_BRIDGE_CONTROLLER0x03 0x03 |
3348 | #define PCI_SUB_CLASS_PCI_TO_PCI_BRIDGE_CONTROLLER0x04 0x04 |
3349 | #define PCI_SUB_CLASS_PCMCIA_BRIDGE_CONTROLLER0x05 0x05 |
3350 | #define PCI_SUB_CLASS_OTHER_BRIDGE_CONTROLLER0x80 0x80 |
3351 | |
3352 | #define PCI_MAX_SLOT0x1F 0x1F |
3353 | #define PCI_MAX_BUS0xFF 0xFF |
3354 | #define PCI_IOADDRESS_MASK0xFFFE 0xFFFE |
3355 | #define ASC_PCI_VENDORID0x10CD 0x10CD |
3356 | #define ASC_PCI_DEVICE_ID_CNT4 4 /* PCI Device ID count. */ |
3357 | #define ASC_PCI_DEVICE_ID_11000x1100 0x1100 |
3358 | #define ASC_PCI_DEVICE_ID_12000x1200 0x1200 |
3359 | #define ASC_PCI_DEVICE_ID_13000x1300 0x1300 |
3360 | #define ASC_PCI_DEVICE_ID_23000x2300 0x2300 |
3361 | |
3362 | /* PCI IO Port Addresses to generate special cycle */ |
3363 | |
3364 | #define PCI_CONFIG_ADDRESS_MECH10x0CF8 0x0CF8 |
3365 | #define PCI_CONFIG_DATA_MECH10x0CFC 0x0CFC |
3366 | |
3367 | #define PCI_CONFIG_FORWARD_REGISTER0x0CFA 0x0CFA /* 0=type 0; 1=type 1; */ |
3368 | |
3369 | #define PCI_CONFIG_BUS_NUMBER_MASK0x00FF0000 0x00FF0000 |
3370 | #define PCI_CONFIG_DEVICE_FUNCTION_MASK0x0000FF00 0x0000FF00 |
3371 | #define PCI_CONFIG_REGISTER_NUMBER_MASK0x000000F8 0x000000F8 |
3372 | |
3373 | #define PCI_DEVICE_FOUND0x0000 0x0000 |
3374 | #define PCI_DEVICE_NOT_FOUND0xffff 0xffff |
3375 | |
3376 | #define SUBCLASS_OFFSET0x0A 0x0A |
3377 | #define CLASSCODE_OFFSET0x0B 0x0B |
3378 | #define VENDORID_OFFSET0x00 0x00 |
3379 | #define DEVICEID_OFFSET0x02 0x02 |
3380 | |
3381 | #ifndef ADVANSYS_STATS |
3382 | #define ASC_STATS(shp, counter)(((asc_board_t *) &((shp)->hostdata))->asc_stats.counter ++) |
3383 | #define ASC_STATS_ADD(shp, counter, count)(((asc_board_t *) &((shp)->hostdata))->asc_stats.counter += (count)) |
3384 | #else /* ADVANSYS_STATS */ |
3385 | #define ASC_STATS(shp, counter)(((asc_board_t *) &((shp)->hostdata))->asc_stats.counter ++) \ |
3386 | (ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata))->asc_stats.counter++) |
3387 | |
3388 | #define ASC_STATS_ADD(shp, counter, count)(((asc_board_t *) &((shp)->hostdata))->asc_stats.counter += (count)) \ |
3389 | (ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata))->asc_stats.counter += (count)) |
3390 | #endif /* ADVANSYS_STATS */ |
3391 | |
3392 | #define ASC_CEILING(val, unit)(((val) + ((unit) - 1))/(unit)) (((val) + ((unit) - 1))/(unit)) |
3393 | |
3394 | /* If the result wraps when calculating tenths, return 0. */ |
3395 | #define ASC_TENTHS(num, den)(((10 * ((num)/(den))) > (((num) * 10)/(den))) ? 0 : ((((num ) * 10)/(den)) - (10 * ((num)/(den))))) \ |
3396 | (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ |
3397 | 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) |
3398 | |
3399 | /* |
3400 | * Display a message to the console. |
3401 | */ |
3402 | #define ASC_PRINT(s){ printk("advansys: "); printk(s); } \ |
3403 | { \ |
3404 | printk("advansys: "); \ |
3405 | printk(s); \ |
3406 | } |
3407 | |
3408 | #define ASC_PRINT1(s, a1){ printk("advansys: "); printk((s), (a1)); } \ |
3409 | { \ |
3410 | printk("advansys: "); \ |
3411 | printk((s), (a1)); \ |
3412 | } |
3413 | |
3414 | #define ASC_PRINT2(s, a1, a2){ printk("advansys: "); printk((s), (a1), (a2)); } \ |
3415 | { \ |
3416 | printk("advansys: "); \ |
3417 | printk((s), (a1), (a2)); \ |
3418 | } |
3419 | |
3420 | #define ASC_PRINT3(s, a1, a2, a3){ printk("advansys: "); printk((s), (a1), (a2), (a3)); } \ |
3421 | { \ |
3422 | printk("advansys: "); \ |
3423 | printk((s), (a1), (a2), (a3)); \ |
3424 | } |
3425 | |
3426 | #define ASC_PRINT4(s, a1, a2, a3, a4){ printk("advansys: "); printk((s), (a1), (a2), (a3), (a4)); } \ |
3427 | { \ |
3428 | printk("advansys: "); \ |
3429 | printk((s), (a1), (a2), (a3), (a4)); \ |
3430 | } |
3431 | |
3432 | |
3433 | #ifndef ADVANSYS_DEBUG |
3434 | |
3435 | #define ASC_DBG(lvl, s) |
3436 | #define ASC_DBG1(lvl, s, a1) |
3437 | #define ASC_DBG2(lvl, s, a1, a2) |
3438 | #define ASC_DBG3(lvl, s, a1, a2, a3) |
3439 | #define ASC_DBG4(lvl, s, a1, a2, a3, a4) |
3440 | #define ASC_DBG_PRT_SCSI_HOST(lvl, s) |
3441 | #define ASC_DBG_PRT_SCSI_CMND(lvl, s) |
3442 | #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) |
3443 | #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) |
3444 | #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) |
3445 | #define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) |
3446 | #define ASC_DBG_PRT_HEX(lvl, name, start, length) |
3447 | #define ASC_DBG_PRT_CDB(lvl, cdb, len) |
3448 | #define ASC_DBG_PRT_SENSE(lvl, sense, len) |
3449 | #define ASC_DBG_PRT_INQUIRY(lvl, inq, len) |
3450 | |
3451 | #else /* ADVANSYS_DEBUG */ |
3452 | |
3453 | /* |
3454 | * Debugging Message Levels: |
3455 | * 0: Errors Only |
3456 | * 1: High-Level Tracing |
3457 | * 2-N: Verbose Tracing |
3458 | */ |
3459 | |
3460 | #define ASC_DBG(lvl, s) \ |
3461 | { \ |
3462 | if (asc_dbglvl >= (lvl)) { \ |
3463 | printk(s); \ |
3464 | } \ |
3465 | } |
3466 | |
3467 | #define ASC_DBG1(lvl, s, a1) \ |
3468 | { \ |
3469 | if (asc_dbglvl >= (lvl)) { \ |
3470 | printk((s), (a1)); \ |
3471 | } \ |
3472 | } |
3473 | |
3474 | #define ASC_DBG2(lvl, s, a1, a2) \ |
3475 | { \ |
3476 | if (asc_dbglvl >= (lvl)) { \ |
3477 | printk((s), (a1), (a2)); \ |
3478 | } \ |
3479 | } |
3480 | |
3481 | #define ASC_DBG3(lvl, s, a1, a2, a3) \ |
3482 | { \ |
3483 | if (asc_dbglvl >= (lvl)) { \ |
3484 | printk((s), (a1), (a2), (a3)); \ |
3485 | } \ |
3486 | } |
3487 | |
3488 | #define ASC_DBG4(lvl, s, a1, a2, a3, a4) \ |
3489 | { \ |
3490 | if (asc_dbglvl >= (lvl)) { \ |
3491 | printk((s), (a1), (a2), (a3), (a4)); \ |
3492 | } \ |
3493 | } |
3494 | |
3495 | #define ASC_DBG_PRT_SCSI_HOST(lvl, s) \ |
3496 | { \ |
3497 | if (asc_dbglvl >= (lvl)) { \ |
3498 | asc_prt_scsi_host(s); \ |
3499 | } \ |
3500 | } |
3501 | |
3502 | #define ASC_DBG_PRT_SCSI_CMND(lvl, s) \ |
3503 | { \ |
3504 | if (asc_dbglvl >= (lvl)) { \ |
3505 | asc_prt_scsi_cmnd(s); \ |
3506 | } \ |
3507 | } |
3508 | |
3509 | #define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \ |
3510 | { \ |
3511 | if (asc_dbglvl >= (lvl)) { \ |
3512 | asc_prt_asc_scsi_q(scsiqp); \ |
3513 | } \ |
3514 | } |
3515 | |
3516 | #define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \ |
3517 | { \ |
3518 | if (asc_dbglvl >= (lvl)) { \ |
3519 | asc_prt_asc_qdone_info(qdone); \ |
3520 | } \ |
3521 | } |
3522 | |
3523 | #define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \ |
3524 | { \ |
3525 | if (asc_dbglvl >= (lvl)) { \ |
3526 | asc_prt_adv_scsi_req_q(scsiqp); \ |
3527 | } \ |
3528 | } |
3529 | |
3530 | #define ASC_DBG_PRT_HEX(lvl, name, start, length) \ |
3531 | { \ |
3532 | if (asc_dbglvl >= (lvl)) { \ |
3533 | asc_prt_hex((name), (start), (length)); \ |
3534 | } \ |
3535 | } |
3536 | |
3537 | #define ASC_DBG_PRT_CDB(lvl, cdb, len) \ |
3538 | ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len)); |
3539 | |
3540 | #define ASC_DBG_PRT_SENSE(lvl, sense, len) \ |
3541 | ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len)); |
3542 | |
3543 | #define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \ |
3544 | ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len)); |
3545 | #endif /* ADVANSYS_DEBUG */ |
3546 | |
3547 | #ifndef ADVANSYS_ASSERT |
3548 | #define ASC_ASSERT(a){ if (!(a)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 3548); } } |
3549 | #else /* ADVANSYS_ASSERT */ |
3550 | |
3551 | #define ASC_ASSERT(a){ if (!(a)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 3551); } } \ |
3552 | { \ |
3553 | if (!(a)) { \ |
3554 | printk("ASC_ASSERT() Failure: file %s, line %d\n", \ |
3555 | __FILE__"../linux/src/drivers/scsi/advansys.c", __LINE__3555); \ |
3556 | } \ |
3557 | } |
3558 | |
3559 | #endif /* ADVANSYS_ASSERT */ |
3560 | |
3561 | |
3562 | /* |
3563 | * --- Driver Structures |
3564 | */ |
3565 | |
3566 | #ifdef ADVANSYS_STATS |
3567 | |
3568 | /* Per board statistics structure */ |
3569 | struct asc_stats { |
3570 | /* Driver Entrypoint Statistics */ |
3571 | ulong command; /* # calls to advansys_command() */ |
3572 | ulong queuecommand; /* # calls to advansys_queuecommand() */ |
3573 | ulong abort; /* # calls to advansys_abort() */ |
3574 | ulong reset; /* # calls to advansys_reset() */ |
3575 | ulong biosparam; /* # calls to advansys_biosparam() */ |
3576 | ulong interrupt; /* # advansys_interrupt() calls */ |
3577 | ulong callback; /* # calls to asc/adv_isr_callback() */ |
3578 | ulong done; /* # calls to request's scsi_done function */ |
3579 | ulong build_error; /* # asc/adv_build_req() ASC_ERROR returns. */ |
3580 | ulong adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */ |
3581 | ulong adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */ |
3582 | /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */ |
3583 | ulong exe_noerror; /* # ASC_NOERROR returns. */ |
3584 | ulong exe_busy; /* # ASC_BUSY returns. */ |
3585 | ulong exe_error; /* # ASC_ERROR returns. */ |
3586 | ulong exe_unknown; /* # unknown returns. */ |
3587 | /* Data Transfer Statistics */ |
3588 | ulong cont_cnt; /* # non-scatter-gather I/O requests received */ |
3589 | ulong cont_xfer; /* # contiguous transfer 512-bytes */ |
3590 | ulong sg_cnt; /* # scatter-gather I/O requests received */ |
3591 | ulong sg_elem; /* # scatter-gather elements */ |
3592 | ulong sg_xfer; /* # scatter-gather transfer 512-bytes */ |
3593 | }; |
3594 | #endif /* ADVANSYS_STATS */ |
3595 | |
3596 | /* |
3597 | * Request queuing structure |
3598 | */ |
3599 | typedef struct asc_queue { |
3600 | ADV_SCSI_BIT_ID_TYPEushort q_tidmask; /* queue mask */ |
3601 | REQP q_first[ADV_MAX_TID15+1]; /* first queued request */ |
3602 | REQP q_last[ADV_MAX_TID15+1]; /* last queued request */ |
3603 | #ifdef ADVANSYS_STATS |
3604 | short q_cur_cnt[ADV_MAX_TID15+1]; /* current queue count */ |
3605 | short q_max_cnt[ADV_MAX_TID15+1]; /* maximum queue count */ |
3606 | ulong q_tot_cnt[ADV_MAX_TID15+1]; /* total enqueue count */ |
3607 | ulong q_tot_tim[ADV_MAX_TID15+1]; /* total time queued */ |
3608 | ushort q_max_tim[ADV_MAX_TID15+1]; /* maximum time queued */ |
3609 | ushort q_min_tim[ADV_MAX_TID15+1]; /* minimum time queued */ |
3610 | #endif /* ADVANSYS_STATS */ |
3611 | } asc_queue_t; |
3612 | |
3613 | /* |
3614 | * Adv Library Request Structures |
3615 | * |
3616 | * The following two se structures are used to process Wide Board requests. |
3617 | * One structure is needed for each command received from the Mid-Level SCSI |
3618 | * driver. |
3619 | * |
3620 | * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library |
3621 | * and microcode with the ADV_SCSI_REQ_Q field 'srb_ptr' pointing to the |
3622 | * adv_req_t. The adv_req_t structure 'cmndp' field in turn points to the |
3623 | * Mid-Level SCSI request structure. |
3624 | * |
3625 | * The adv_sgblk_t structure is used to handle requests that include |
3626 | * scatter-gather elements. |
3627 | */ |
3628 | typedef struct adv_sgblk { |
3629 | ADV_SG_BLOCK sg_block[ADV_NUM_SG_BLOCK((64 + (15 - 1))/15) + ADV_NUM_PAGE_CROSSING(((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))]; |
3630 | uchar align2[4]; /* Sgblock structure padding. */ |
3631 | struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */ |
3632 | } adv_sgblk_t; |
3633 | |
3634 | typedef struct adv_req { |
3635 | ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */ |
3636 | uchar align1[4]; /* Request structure padding. */ |
3637 | Scsi_Cmnd *cmndp; /* Mid-Level SCSI command pointer. */ |
3638 | adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */ |
3639 | struct adv_req *next_reqp; /* Next Request Structure. */ |
3640 | } adv_req_t; |
3641 | |
3642 | /* |
3643 | * Structure allocated for each board. |
3644 | * |
3645 | * This structure is allocated by scsi_register() at the end |
3646 | * of the 'Scsi_Host' structure starting at the 'hostdata' |
3647 | * field. It is guaranteed to be allocated from DMA-able memory. |
3648 | */ |
3649 | typedef struct asc_board { |
3650 | int id; /* Board Id */ |
3651 | uint flags; /* Board flags */ |
3652 | union { |
3653 | ASC_DVC_VAR asc_dvc_var; /* Narrow board */ |
3654 | ADV_DVC_VAR adv_dvc_var; /* Wide board */ |
3655 | } dvc_var; |
3656 | union { |
3657 | ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */ |
3658 | ADV_DVC_CFG adv_dvc_cfg; /* Wide board */ |
3659 | } dvc_cfg; |
3660 | asc_queue_t active; /* Active command queue */ |
3661 | asc_queue_t waiting; /* Waiting command queue */ |
3662 | asc_queue_t done; /* Done command queue */ |
3663 | ADV_SCSI_BIT_ID_TYPEushort init_tidmask; /* Target init./valid mask */ |
3664 | Scsi_Device *device[ADV_MAX_TID15+1]; /* Mid-Level Scsi Device */ |
3665 | ushort reqcnt[ADV_MAX_TID15+1]; /* Starvation request count */ |
3666 | #if ASC_QUEUE_FLOW_CONTROL |
3667 | ushort nerrcnt[ADV_MAX_TID15+1]; /* No error request count */ |
3668 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
3669 | ADV_SCSI_BIT_ID_TYPEushort queue_full; /* Queue full mask */ |
3670 | ushort queue_full_cnt[ADV_MAX_TID15+1]; /* Queue full count */ |
3671 | union { |
3672 | ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */ |
3673 | ADVEEP_CONFIG adv_eep; /* Wide EEPROM config. */ |
3674 | } eep_config; |
3675 | ulong last_reset; /* Saved last reset time */ |
3676 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3677 | /* /proc/scsi/advansys/[0...] */ |
3678 | char *prtbuf; /* Statistics Print Buffer */ |
3679 | #endif /* version >= v1.3.0 */ |
3680 | #ifdef ADVANSYS_STATS |
3681 | struct asc_stats asc_stats; /* Board statistics */ |
3682 | #endif /* ADVANSYS_STATS */ |
3683 | /* |
3684 | * The following fields are used only for Narrow Boards. |
3685 | */ |
3686 | /* The following three structures must be in DMA-able memory. */ |
3687 | ASC_SCSI_REQ_Q scsireqq; |
3688 | ASC_CAP_INFO cap_info; |
3689 | ASC_SCSI_INQUIRY inquiry; |
3690 | uchar sdtr_data[ASC_MAX_TID7+1]; /* SDTR information */ |
3691 | /* |
3692 | * The following fields are used only for Wide Boards. |
3693 | */ |
3694 | void *ioremap_addr; /* I/O Memory remap address. */ |
3695 | ushort ioport; /* I/O Port address. */ |
3696 | adv_req_t *orig_reqp; /* adv_req_t memory block. */ |
3697 | adv_req_t *adv_reqp; /* Request structures. */ |
3698 | adv_sgblk_t *orig_sgblkp; /* adv_sgblk_t memory block. */ |
3699 | adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */ |
3700 | ushort bios_signature; /* BIOS Signature. */ |
3701 | ushort bios_version; /* BIOS Version. */ |
3702 | ushort bios_codeseg; /* BIOS Code Segment. */ |
3703 | ushort bios_codelen; /* BIOS Code Segment Length. */ |
3704 | } asc_board_t; |
3705 | |
3706 | /* |
3707 | * PCI configuration structures |
3708 | */ |
3709 | typedef struct _PCI_DATA_ |
3710 | { |
3711 | uchar type; |
3712 | uchar bus; |
3713 | uchar slot; |
3714 | uchar func; |
3715 | uchar offset; |
3716 | } PCI_DATA; |
3717 | |
3718 | typedef struct _PCI_DEVICE_ |
3719 | { |
3720 | ushort vendorID; |
3721 | ushort deviceID; |
3722 | ushort slotNumber; |
3723 | ushort slotFound; |
3724 | uchar busNumber; |
3725 | uchar maxBusNumber; |
3726 | uchar devFunc; |
3727 | ushort startSlot; |
3728 | ushort endSlot; |
3729 | uchar bridge; |
3730 | uchar type; |
3731 | } PCI_DEVICE; |
3732 | |
3733 | typedef struct _PCI_CONFIG_SPACE_ |
3734 | { |
3735 | ushort vendorID; |
3736 | ushort deviceID; |
3737 | ushort command; |
3738 | ushort status; |
3739 | uchar revision; |
3740 | uchar classCode[3]; |
3741 | uchar cacheSize; |
3742 | uchar latencyTimer; |
3743 | uchar headerType; |
3744 | uchar bist; |
3745 | ulong baseAddress[6]; |
3746 | ushort reserved[4]; |
3747 | ulong optionRomAddr; |
3748 | ushort reserved2[4]; |
3749 | uchar irqLine; |
3750 | uchar irqPin; |
3751 | uchar minGnt; |
3752 | uchar maxLatency; |
3753 | } PCI_CONFIG_SPACE; |
3754 | |
3755 | |
3756 | /* |
3757 | * --- Driver Data |
3758 | */ |
3759 | |
3760 | /* Note: All driver global data should be initialized. */ |
3761 | |
3762 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3763 | struct proc_dir_entry proc_scsi_advansys = |
3764 | { |
3765 | PROC_SCSI_ADVANSYS, /* unsigned short low_ino */ |
3766 | 8, /* unsigned short namelen */ |
3767 | "advansys", /* const char *name */ |
3768 | S_IFDIR0040000 | S_IRUGO(00400|00040|00004) | S_IXUGO(00100|00010|00001), /* mode_t mode */ |
3769 | 2 /* nlink_t nlink */ |
3770 | }; |
3771 | #endif /* version >= v1.3.0 */ |
3772 | |
3773 | /* Number of boards detected in system. */ |
3774 | STATICstatic int asc_board_count = 0; |
3775 | STATICstatic struct Scsi_Host *asc_host[ASC_NUM_BOARD_SUPPORTED16] = { 0 }; |
3776 | |
3777 | /* Overrun buffer shared between all boards. */ |
3778 | STATICstatic uchar overrun_buf[ASC_OVERRUN_BSIZE0x00000048UL] = { 0 }; |
3779 | |
3780 | /* |
3781 | * Global structures required to issue a command. |
3782 | */ |
3783 | STATICstatic ASC_SCSI_Q asc_scsi_q = { { 0 } }; |
3784 | STATICstatic ASC_SG_HEAD asc_sg_head = { 0 }; |
3785 | |
3786 | /* List of supported bus types. */ |
3787 | STATICstatic ushort asc_bus[ASC_NUM_BUS4] ASC_INITDATA = { |
3788 | ASC_IS_ISA(0x0001), |
3789 | ASC_IS_VL(0x0040), |
3790 | ASC_IS_EISA(0x0002), |
3791 | ASC_IS_PCI(0x0004), |
3792 | }; |
3793 | |
3794 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
3795 | #ifdef ASC_CONFIG_PCI |
3796 | STATICstatic int pci_scan_method ASC_INITDATA = -1; |
3797 | #endif /* ASC_CONFIG_PCI */ |
3798 | #endif /* version < v2.1.93 */ |
3799 | |
3800 | /* |
3801 | * Used with the LILO 'advansys' option to eliminate or |
3802 | * limit I/O port probing at boot time, cf. advansys_setup(). |
3803 | */ |
3804 | STATICstatic int asc_iopflag = ASC_FALSE0; |
3805 | STATICstatic int asc_ioport[ASC_NUM_IOPORT_PROBE4] = { 0, 0, 0, 0 }; |
3806 | |
3807 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3808 | /* |
3809 | * In kernels earlier than v1.3.0, kmalloc() does not work |
3810 | * during driver initialization. Therefore statically declare |
3811 | * 16 elements of each structure. v1.3.0 kernels will probably |
3812 | * not need any more than this number. |
3813 | */ |
3814 | uchar adv_req_buf[16 * sizeof(adv_req_t)] = { 0 }; |
3815 | uchar adv_sgblk_buf[16 * sizeof(adv_sgblk_t)] = { 0 }; |
3816 | #endif /* version >= v1,3,0 */ |
3817 | |
3818 | #ifdef ADVANSYS_DEBUG |
3819 | STATICstatic char * |
3820 | asc_bus_name[ASC_NUM_BUS4] = { |
3821 | "ASC_IS_ISA", |
3822 | "ASC_IS_VL", |
3823 | "ASC_IS_EISA", |
3824 | "ASC_IS_PCI", |
3825 | }; |
3826 | |
3827 | STATICstatic int asc_dbglvl = 0; |
3828 | #endif /* ADVANSYS_DEBUG */ |
3829 | |
3830 | /* Declaration for Asc Library internal data referenced by driver. */ |
3831 | STATICstatic PortAddrunsigned short _asc_def_iop_base[]; |
3832 | |
3833 | |
3834 | /* |
3835 | * --- Driver Function Prototypes |
3836 | * |
3837 | * advansys.h contains function prototypes for functions global to Linux. |
3838 | */ |
3839 | |
3840 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3841 | STATICstatic int asc_proc_copy(off_t, off_t, char *, int , char *, int); |
3842 | #endif /* version >= v1.3.0 */ |
3843 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,70)(((1) * 65536) + ((3) * 256) + (70)) |
3844 | STATICstatic void advansys_interrupt(int, struct pt_regs *); |
3845 | #else /* version >= v1.3.70 */ |
3846 | STATICstatic void advansys_interrupt(int, void *, struct pt_regs *); |
3847 | #endif /* version >= v1.3.70 */ |
3848 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
3849 | STATICstatic void advansys_select_queue_depths(struct Scsi_Host *, |
3850 | Scsi_Device *); |
3851 | #endif /* version >= v1.3.89 */ |
3852 | STATICstatic void advansys_command_done(Scsi_Cmnd *); |
3853 | STATICstatic void asc_scsi_done_list(Scsi_Cmnd *); |
3854 | STATICstatic int asc_execute_scsi_cmnd(Scsi_Cmnd *); |
3855 | STATICstatic int asc_build_req(asc_board_t *, Scsi_Cmnd *); |
3856 | STATICstatic int adv_build_req(asc_board_t *, Scsi_Cmnd *, ADV_SCSI_REQ_Q **); |
3857 | STATICstatic int adv_get_sglist(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *, Scsi_Cmnd *); |
3858 | STATICstatic void asc_isr_callback(ASC_DVC_VAR *, ASC_QDONE_INFO *); |
3859 | STATICstatic void adv_isr_callback(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *); |
3860 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
3861 | #ifdef ASC_CONFIG_PCI |
3862 | STATICstatic int asc_srch_pci_dev(PCI_DEVICE *); |
3863 | STATICstatic uchar asc_scan_method(void); |
3864 | STATICstatic int asc_pci_find_dev(PCI_DEVICE *); |
3865 | STATICstatic void asc_get_pci_cfg(PCI_DEVICE *, PCI_CONFIG_SPACE *); |
3866 | STATICstatic ushort asc_get_cfg_word(PCI_DATA *); |
3867 | STATICstatic uchar asc_get_cfg_byte(PCI_DATA *); |
3868 | STATICstatic void asc_put_cfg_byte(PCI_DATA *, uchar); |
3869 | #endif /* ASC_CONFIG_PCI */ |
3870 | #endif /* version < v2.1.93 */ |
3871 | STATICstatic void asc_enqueue(asc_queue_t *, REQP, int); |
3872 | STATICstatic REQP asc_dequeue(asc_queue_t *, int); |
3873 | STATICstatic REQP asc_dequeue_list(asc_queue_t *, REQP *, int); |
3874 | STATICstatic int asc_rmqueue(asc_queue_t *, REQP); |
3875 | STATICstatic int asc_isqueued(asc_queue_t *, REQP); |
3876 | STATICstatic void asc_execute_queue(asc_queue_t *); |
3877 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3878 | STATICstatic int asc_prt_board_devices(struct Scsi_Host *, char *, int); |
3879 | STATICstatic int asc_prt_adv_bios(struct Scsi_Host *, char *, int); |
3880 | STATICstatic int asc_get_eeprom_string(ushort *serialnum, uchar *cp); |
3881 | STATICstatic int asc_prt_asc_board_eeprom(struct Scsi_Host *, char *, int); |
3882 | STATICstatic int asc_prt_adv_board_eeprom(struct Scsi_Host *, char *, int); |
3883 | STATICstatic int asc_prt_driver_conf(struct Scsi_Host *, char *, int); |
3884 | STATICstatic int asc_prt_asc_board_info(struct Scsi_Host *, char *, int); |
3885 | STATICstatic int asc_prt_adv_board_info(struct Scsi_Host *, char *, int); |
3886 | STATICstatic int asc_prt_line(char *, int, char *fmt, ...); |
3887 | #endif /* version >= v1.3.0 */ |
3888 | |
3889 | /* Declaration for Asc Library internal functions reference by driver. */ |
3890 | STATICstatic int AscFindSignature(PortAddrunsigned short); |
3891 | STATICstatic ushort AscGetEEPConfig(PortAddrunsigned short, ASCEEP_CONFIG *, ushort); |
3892 | |
3893 | #ifdef ADVANSYS_STATS |
3894 | STATICstatic int asc_prt_board_stats(struct Scsi_Host *, char *, int); |
3895 | #endif /* ADVANSYS_STATS */ |
3896 | |
3897 | #ifdef ADVANSYS_DEBUG |
3898 | STATICstatic void asc_prt_scsi_host(struct Scsi_Host *); |
3899 | STATICstatic void asc_prt_scsi_cmnd(Scsi_Cmnd *); |
3900 | STATICstatic void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *); |
3901 | STATICstatic void asc_prt_asc_dvc_var(ASC_DVC_VAR *); |
3902 | STATICstatic void asc_prt_asc_scsi_q(ASC_SCSI_Q *); |
3903 | STATICstatic void asc_prt_asc_qdone_info(ASC_QDONE_INFO *); |
3904 | STATICstatic void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *); |
3905 | STATICstatic void asc_prt_adv_dvc_var(ADV_DVC_VAR *); |
3906 | STATICstatic void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *); |
3907 | STATICstatic void asc_prt_adv_sgblock(int, ADV_SG_BLOCK *); |
3908 | STATICstatic void asc_prt_hex(char *f, uchar *, int); |
3909 | #endif /* ADVANSYS_DEBUG */ |
3910 | |
3911 | #ifdef ADVANSYS_ASSERT |
3912 | STATICstatic int interrupts_enabled(void); |
3913 | #endif /* ADVANSYS_ASSERT */ |
3914 | |
3915 | |
3916 | /* |
3917 | * --- Linux 'Scsi_Host_Template' and advansys_setup() Functions |
3918 | */ |
3919 | |
3920 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
3921 | /* |
3922 | * advansys_proc_info() - /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)] |
3923 | * |
3924 | * *buffer: I/O buffer |
3925 | * **start: if inout == FALSE pointer into buffer where user read should start |
3926 | * offset: current offset into a /proc/scsi/advansys/[0...] file |
3927 | * length: length of buffer |
3928 | * hostno: Scsi_Host host_no |
3929 | * inout: TRUE - user is writing; FALSE - user is reading |
3930 | * |
3931 | * Return the number of bytes read from or written to a |
3932 | * /proc/scsi/advansys/[0...] file. |
3933 | * |
3934 | * Note: This function uses the per board buffer 'prtbuf' which is |
3935 | * allocated when the board is initialized in advansys_detect(). The |
3936 | * buffer is ASC_PRTBUF_SIZE bytes. The function asc_proc_copy() is |
3937 | * used to write to the buffer. The way asc_proc_copy() is written |
3938 | * if 'prtbuf' is too small it will not be overwritten. Instead the |
3939 | * user just won't get all the available statistics. |
3940 | */ |
3941 | int |
3942 | advansys_proc_info(char *buffer, char **start, off_t offset, int length, |
3943 | int hostno, int inout) |
3944 | { |
3945 | struct Scsi_Host *shp; |
3946 | asc_board_t *boardp; |
3947 | int i; |
3948 | char *cp; |
3949 | int cplen; |
3950 | int cnt; |
3951 | int totcnt; |
3952 | int leftlen; |
3953 | char *curbuf; |
3954 | off_t advoffset; |
3955 | Scsi_Device *scd; |
3956 | |
3957 | ASC_DBG(1, "advansys_proc_info: begin\n"); |
3958 | |
3959 | /* |
3960 | * User write not supported. |
3961 | */ |
3962 | if (inout == TRUE1) { |
3963 | return(-ENOSYS38); |
3964 | } |
3965 | |
3966 | /* |
3967 | * User read of /proc/scsi/advansys/[0...] file. |
3968 | */ |
3969 | |
3970 | /* Find the specified board. */ |
3971 | for (i = 0; i < asc_board_count; i++) { |
3972 | if (asc_host[i]->host_no == hostno) { |
3973 | break; |
3974 | } |
3975 | } |
3976 | if (i == asc_board_count) { |
3977 | return(-ENOENT2); |
3978 | } |
3979 | |
3980 | shp = asc_host[i]; |
3981 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
3982 | |
3983 | /* Copy read data starting at the beginning of the buffer. */ |
3984 | *start = buffer; |
3985 | curbuf = buffer; |
3986 | advoffset = 0; |
3987 | totcnt = 0; |
3988 | leftlen = length; |
3989 | |
3990 | /* |
3991 | * Get board configuration information. |
3992 | * |
3993 | * advansys_info() returns the board string from its own static buffer. |
3994 | */ |
3995 | cp = (char *) advansys_info(shp); |
3996 | strcat(cp, "\n"); |
3997 | cplen = strlen(cp); |
3998 | /* Copy board information. */ |
3999 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4000 | totcnt += cnt; |
4001 | leftlen -= cnt; |
4002 | if (leftlen == 0) { |
4003 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4004 | return totcnt; |
4005 | } |
4006 | advoffset += cplen; |
4007 | curbuf += cnt; |
4008 | |
4009 | /* |
4010 | * Display Wide Board BIOS Information. |
4011 | */ |
4012 | if (ASC_WIDE_BOARD(boardp)((boardp)->flags & 0x04)) { |
4013 | cp = boardp->prtbuf; |
4014 | cplen = asc_prt_adv_bios(shp, cp, ASC_PRTBUF_SIZE2048); |
4015 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4015); } }; |
4016 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4017 | totcnt += cnt; |
4018 | leftlen -= cnt; |
4019 | if (leftlen == 0) { |
4020 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4021 | return totcnt; |
4022 | } |
4023 | advoffset += cplen; |
4024 | curbuf += cnt; |
4025 | } |
4026 | |
4027 | /* |
4028 | * Display driver information for each device attached to the board. |
4029 | */ |
4030 | cp = boardp->prtbuf; |
4031 | cplen = asc_prt_board_devices(shp, cp, ASC_PRTBUF_SIZE2048); |
4032 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4032); } }; |
4033 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4034 | totcnt += cnt; |
4035 | leftlen -= cnt; |
4036 | if (leftlen == 0) { |
4037 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4038 | return totcnt; |
4039 | } |
4040 | advoffset += cplen; |
4041 | curbuf += cnt; |
4042 | |
4043 | /* |
4044 | * Display target driver information for each device attached |
4045 | * to the board. |
4046 | */ |
4047 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,75)(((2) * 65536) + ((1) * 256) + (75)) |
4048 | for (scd = scsi_devices; scd; scd = scd->next) |
4049 | #else /* version >= v2.1.75 */ |
4050 | for (scd = shp->host_queue; scd; scd = scd->next) |
4051 | #endif /* version >= v2.1.75 */ |
4052 | { |
4053 | if (scd->host == shp) { |
4054 | cp = boardp->prtbuf; |
4055 | /* |
4056 | * Note: If proc_print_scsidevice() writes more than |
4057 | * ASC_PRTBUF_SIZE bytes, it will overrun 'prtbuf'. |
4058 | */ |
4059 | proc_print_scsidevice(scd, cp, &cplen, 0); |
4060 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4060); } }; |
4061 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4062 | totcnt += cnt; |
4063 | leftlen -= cnt; |
4064 | if (leftlen == 0) { |
4065 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4066 | return totcnt; |
4067 | } |
4068 | advoffset += cplen; |
4069 | curbuf += cnt; |
4070 | } |
4071 | } |
4072 | |
4073 | /* |
4074 | * Display EEPROM configuration for the board. |
4075 | */ |
4076 | cp = boardp->prtbuf; |
4077 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4078 | cplen = asc_prt_asc_board_eeprom(shp, cp, ASC_PRTBUF_SIZE2048); |
4079 | } else { |
4080 | cplen = asc_prt_adv_board_eeprom(shp, cp, ASC_PRTBUF_SIZE2048); |
4081 | } |
4082 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4082); } }; |
4083 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4084 | totcnt += cnt; |
4085 | leftlen -= cnt; |
4086 | if (leftlen == 0) { |
4087 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4088 | return totcnt; |
4089 | } |
4090 | advoffset += cplen; |
4091 | curbuf += cnt; |
4092 | |
4093 | /* |
4094 | * Display driver configuration and information for the board. |
4095 | */ |
4096 | cp = boardp->prtbuf; |
4097 | cplen = asc_prt_driver_conf(shp, cp, ASC_PRTBUF_SIZE2048); |
4098 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4098); } }; |
4099 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4100 | totcnt += cnt; |
4101 | leftlen -= cnt; |
4102 | if (leftlen == 0) { |
4103 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4104 | return totcnt; |
4105 | } |
4106 | advoffset += cplen; |
4107 | curbuf += cnt; |
4108 | |
4109 | #ifdef ADVANSYS_STATS |
4110 | /* |
4111 | * Display driver statistics for the board. |
4112 | */ |
4113 | cp = boardp->prtbuf; |
4114 | cplen = asc_prt_board_stats(shp, cp, ASC_PRTBUF_SIZE2048); |
4115 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4115); } }; |
4116 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4117 | totcnt += cnt; |
4118 | leftlen -= cnt; |
4119 | if (leftlen == 0) { |
4120 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4121 | return totcnt; |
4122 | } |
4123 | advoffset += cplen; |
4124 | curbuf += cnt; |
4125 | #endif /* ADVANSYS_STATS */ |
4126 | |
4127 | /* |
4128 | * Display Asc Library dynamic configuration information |
4129 | * for the board. |
4130 | */ |
4131 | cp = boardp->prtbuf; |
4132 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4133 | cplen = asc_prt_asc_board_info(shp, cp, ASC_PRTBUF_SIZE2048); |
4134 | } else { |
4135 | cplen = asc_prt_adv_board_info(shp, cp, ASC_PRTBUF_SIZE2048); |
4136 | } |
4137 | ASC_ASSERT(cplen < ASC_PRTBUF_SIZE){ if (!(cplen < 2048)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 4137); } }; |
4138 | cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen); |
4139 | totcnt += cnt; |
4140 | leftlen -= cnt; |
4141 | if (leftlen == 0) { |
4142 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4143 | return totcnt; |
4144 | } |
4145 | advoffset += cplen; |
4146 | curbuf += cnt; |
4147 | |
4148 | ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt); |
4149 | |
4150 | return totcnt; |
4151 | } |
4152 | #endif /* version >= v1.3.0 */ |
4153 | |
4154 | /* |
4155 | * advansys_detect() |
4156 | * |
4157 | * Detect function for AdvanSys adapters. |
4158 | * |
4159 | * Argument is a pointer to the host driver's scsi_hosts entry. |
4160 | * |
4161 | * Return number of adapters found. |
4162 | * |
4163 | * Note: Because this function is called during system initialization |
4164 | * it must not call SCSI mid-level functions including scsi_malloc() |
4165 | * and scsi_free(). |
4166 | */ |
4167 | ASC_INITFUNC(int advansys_detect(Scsi_Host_Template *tpnt) |
4168 | intint advansys_detect(Scsi_Host_Template *tpnt) |
4169 | advansys_detect(Scsi_Host_Template *tpnt)int advansys_detect(Scsi_Host_Template *tpnt) |
4170 | )int advansys_detect(Scsi_Host_Template *tpnt) |
4171 | { |
4172 | static int detect_called = ASC_FALSE0; |
4173 | int iop; |
4174 | int bus; |
4175 | struct Scsi_Host *shp; |
4176 | asc_board_t *boardp; |
4177 | ASC_DVC_VAR *asc_dvc_varp = NULL((void *) 0); |
4178 | ADV_DVC_VAR *adv_dvc_varp = NULL((void *) 0); |
4179 | int ioport = 0; |
4180 | int share_irq = FALSE0; |
4181 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4182 | #ifdef ASC_CONFIG_PCI |
4183 | PCI_DEVICE pciDevice; |
4184 | PCI_CONFIG_SPACE pciConfig; |
4185 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4186 | unsigned long pci_memory_address; |
4187 | #endif /* version >= v1,3,0 */ |
4188 | #endif /* ASC_CONFIG_PCI */ |
4189 | #else /* version >= v2.1.93 */ |
4190 | #ifdef CONFIG_PCI1 |
4191 | struct pci_dev *pci_devp = NULL((void *) 0); |
4192 | int pci_device_id_cnt = 0; |
4193 | unsigned int pci_device_id[ASC_PCI_DEVICE_ID_CNT4] = { |
4194 | ASC_PCI_DEVICE_ID_11000x1100, |
4195 | ASC_PCI_DEVICE_ID_12000x1200, |
4196 | ASC_PCI_DEVICE_ID_13000x1300, |
4197 | ASC_PCI_DEVICE_ID_23000x2300 |
4198 | }; |
4199 | unsigned long pci_memory_address; |
4200 | #endif /* CONFIG_PCI */ |
4201 | #endif /* version >= v2.1.93 */ |
4202 | int warn_code, err_code; |
4203 | int ret; |
4204 | |
4205 | if (detect_called == ASC_FALSE0) { |
4206 | detect_called = ASC_TRUE1; |
4207 | } else { |
4208 | printk("AdvanSys SCSI: advansys_detect() multiple calls ignored\n"); |
4209 | return 0; |
4210 | } |
4211 | |
4212 | ASC_DBG(1, "advansys_detect: begin\n"); |
4213 | |
4214 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4215 | tpnt->proc_dir = &proc_scsi_advansys; |
4216 | #endif /* version >= v1.3.0 */ |
4217 | |
4218 | asc_board_count = 0; |
4219 | |
4220 | /* |
4221 | * If I/O port probing has been modified, then verify and |
4222 | * clean-up the 'asc_ioport' list. |
4223 | */ |
4224 | if (asc_iopflag == ASC_TRUE1) { |
4225 | for (ioport = 0; ioport < ASC_NUM_IOPORT_PROBE4; ioport++) { |
4226 | ASC_DBG2(1, "advansys_detect: asc_ioport[%d] %x\n", |
4227 | ioport, asc_ioport[ioport]); |
4228 | if (asc_ioport[ioport] != 0) { |
4229 | for (iop = 0; iop < ASC_IOADR_TABLE_MAX_IX11; iop++) { |
4230 | if (_asc_def_iop_base[iop] == asc_ioport[ioport]) { |
4231 | break; |
4232 | } |
4233 | } |
4234 | if (iop == ASC_IOADR_TABLE_MAX_IX11) { |
4235 | printk( |
4236 | "AdvanSys SCSI: specified I/O Port 0x%X is invalid\n", |
4237 | asc_ioport[ioport]); |
4238 | asc_ioport[ioport] = 0; |
4239 | } |
4240 | } |
4241 | } |
4242 | ioport = 0; |
4243 | } |
4244 | |
4245 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4246 | #ifdef ASC_CONFIG_PCI |
4247 | memset(&pciDevice, 0, sizeof(PCI_DEVICE))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(PCI_DEVICE ))) ? __constant_c_and_count_memset(((&pciDevice)),((0x01010101UL *(unsigned char)(0))),((sizeof(PCI_DEVICE)))) : __constant_c_memset (((&pciDevice)),((0x01010101UL*(unsigned char)(0))),((sizeof (PCI_DEVICE))))) : (__builtin_constant_p((sizeof(PCI_DEVICE)) ) ? __memset_generic((((&pciDevice))),(((0))),(((sizeof(PCI_DEVICE ))))) : __memset_generic(((&pciDevice)),((0)),((sizeof(PCI_DEVICE )))))); |
4248 | memset(&pciConfig, 0, sizeof(PCI_CONFIG_SPACE))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(PCI_CONFIG_SPACE ))) ? __constant_c_and_count_memset(((&pciConfig)),((0x01010101UL *(unsigned char)(0))),((sizeof(PCI_CONFIG_SPACE)))) : __constant_c_memset (((&pciConfig)),((0x01010101UL*(unsigned char)(0))),((sizeof (PCI_CONFIG_SPACE))))) : (__builtin_constant_p((sizeof(PCI_CONFIG_SPACE ))) ? __memset_generic((((&pciConfig))),(((0))),(((sizeof (PCI_CONFIG_SPACE))))) : __memset_generic(((&pciConfig)), ((0)),((sizeof(PCI_CONFIG_SPACE)))))); |
4249 | pciDevice.maxBusNumber = PCI_MAX_BUS0xFF; |
4250 | pciDevice.endSlot = PCI_MAX_SLOT0x1F; |
4251 | #endif /* ASC_CONFIG_PCI */ |
4252 | #endif /* version < v2.1.93 */ |
4253 | |
4254 | for (bus = 0; bus < ASC_NUM_BUS4; bus++) { |
4255 | |
4256 | ASC_DBG2(1, "advansys_detect: bus search type %d (%s)\n", |
4257 | bus, asc_bus_name[bus]); |
4258 | iop = 0; |
4259 | |
4260 | while (asc_board_count < ASC_NUM_BOARD_SUPPORTED16) { |
4261 | |
4262 | ASC_DBG1(2, "advansys_detect: asc_board_count %d\n", |
4263 | asc_board_count); |
4264 | |
4265 | switch (asc_bus[bus]) { |
4266 | case ASC_IS_ISA(0x0001): |
4267 | case ASC_IS_VL(0x0040): |
4268 | if (asc_iopflag == ASC_FALSE0) { |
4269 | iop = AscSearchIOPortAddr(iop, asc_bus[bus]); |
4270 | } else { |
4271 | /* |
4272 | * ISA and VL I/O port scanning has either been |
4273 | * eliminated or limited to selected ports on |
4274 | * the LILO command line, /etc/lilo.conf, or |
4275 | * by setting variables when the module was loaded. |
4276 | */ |
4277 | ASC_DBG(1, "advansys_detect: I/O port scanning modified\n"); |
4278 | ioport_try_again: |
4279 | iop = 0; |
4280 | for (; ioport < ASC_NUM_IOPORT_PROBE4; ioport++) { |
4281 | if ((iop = asc_ioport[ioport]) != 0) { |
4282 | break; |
4283 | } |
4284 | } |
4285 | if (iop) { |
4286 | ASC_DBG1(1, "advansys_detect: probing I/O port %x...\n", |
4287 | iop); |
4288 | if (check_region(iop, ASC_IOADR_GAP0x10) != 0) { |
4289 | printk( |
4290 | "AdvanSys SCSI: specified I/O Port 0x%X is busy\n", iop); |
4291 | /* Don't try this I/O port twice. */ |
4292 | asc_ioport[ioport] = 0; |
4293 | goto ioport_try_again; |
4294 | } else if (AscFindSignature(iop) == ASC_FALSE0) { |
4295 | printk( |
4296 | "AdvanSys SCSI: specified I/O Port 0x%X has no adapter\n", iop); |
4297 | /* Don't try this I/O port twice. */ |
4298 | asc_ioport[ioport] = 0; |
4299 | goto ioport_try_again; |
4300 | } else { |
4301 | /* |
4302 | * If this isn't an ISA board, then it must be |
4303 | * a VL board. If currently looking an ISA |
4304 | * board is being looked for then try for |
4305 | * another ISA board in 'asc_ioport'. |
4306 | */ |
4307 | if (asc_bus[bus] == ASC_IS_ISA(0x0001) && |
4308 | (AscGetChipVersion(iop, ASC_IS_ISA(0x0001)) & |
4309 | ASC_CHIP_VER_ISA_BIT(0x30)) == 0) { |
4310 | /* |
4311 | * Don't clear 'asc_ioport[ioport]'. Try |
4312 | * this board again for VL. Increment |
4313 | * 'ioport' past this board. |
4314 | */ |
4315 | ioport++; |
4316 | goto ioport_try_again; |
4317 | } |
4318 | } |
4319 | /* |
4320 | * This board appears good, don't try the I/O port |
4321 | * again by clearing its value. Increment 'ioport' |
4322 | * for the next iteration. |
4323 | */ |
4324 | asc_ioport[ioport++] = 0; |
4325 | } |
4326 | } |
4327 | break; |
4328 | |
4329 | case ASC_IS_EISA(0x0002): |
4330 | iop = AscSearchIOPortAddr(iop, asc_bus[bus]); |
4331 | break; |
4332 | |
4333 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4334 | #ifdef ASC_CONFIG_PCI |
4335 | case ASC_IS_PCI(0x0004): |
4336 | if (asc_srch_pci_dev(&pciDevice) != PCI_DEVICE_FOUND0x0000) { |
4337 | iop = 0; |
4338 | } else { |
4339 | ASC_DBG2(2, |
4340 | "advansys_detect: slotFound %d, busNumber %d\n", |
4341 | pciDevice.slotFound, pciDevice.busNumber); |
4342 | asc_get_pci_cfg(&pciDevice, &pciConfig); |
4343 | iop = pciConfig.baseAddress[0] & PCI_IOADDRESS_MASK0xFFFE; |
4344 | ASC_DBG2(1, |
4345 | "advansys_detect: vendorID %X, deviceID %X\n", |
4346 | pciConfig.vendorID, pciConfig.deviceID); |
4347 | ASC_DBG2(2, "advansys_detect: iop %X, irqLine %d\n", |
4348 | iop, pciConfig.irqLine); |
4349 | } |
4350 | break; |
4351 | #endif /* ASC_CONFIG_PCI */ |
4352 | #else /* version >= v2.1.93 */ |
4353 | #ifdef CONFIG_PCI1 |
4354 | case ASC_IS_PCI(0x0004): |
4355 | while (pci_device_id_cnt < ASC_PCI_DEVICE_ID_CNT4) { |
4356 | if ((pci_devp = pci_find_device(ASC_PCI_VENDORID0x10CD, |
4357 | pci_device_id[pci_device_id_cnt], pci_devp)) == NULL((void *) 0)) { |
4358 | pci_device_id_cnt++; |
4359 | } else { |
4360 | break; |
4361 | } |
4362 | } |
4363 | if (pci_devp == NULL((void *) 0)) { |
4364 | iop = 0; |
4365 | } else { |
4366 | ASC_DBG2(2, |
4367 | "advansys_detect: devfn %d, bus number %d\n", |
4368 | pci_devp->devfn, pci_devp->bus->number); |
4369 | iop = pci_devp->base_address[0] & PCI_IOADDRESS_MASK0xFFFE; |
4370 | ASC_DBG2(1, |
4371 | "advansys_detect: vendorID %X, deviceID %X\n", |
4372 | pci_devp->vendor, pci_devp->device); |
4373 | ASC_DBG2(2, "advansys_detect: iop %X, irqLine %d\n", |
4374 | iop, pci_devp->irq); |
4375 | } |
4376 | break; |
4377 | #endif /* CONFIG_PCI */ |
4378 | #endif /* version >= v2.1.93 */ |
4379 | |
4380 | default: |
4381 | ASC_PRINT1("advansys_detect: unknown bus type: %d\n",{ printk("advansys: "); printk(("advansys_detect: unknown bus type: %d\n" ), (asc_bus[bus])); } |
4382 | asc_bus[bus]){ printk("advansys: "); printk(("advansys_detect: unknown bus type: %d\n" ), (asc_bus[bus])); }; |
4383 | break; |
4384 | } |
4385 | ASC_DBG1(1, "advansys_detect: iop %x\n", iop); |
4386 | |
4387 | /* |
4388 | * Adapter not found, try next bus type. |
4389 | */ |
4390 | if (iop == 0) { |
4391 | break; |
4392 | } |
4393 | |
4394 | /* |
4395 | * Adapter found. |
4396 | * |
4397 | * Register the adapter, get its configuration, and |
4398 | * initialize it. |
4399 | */ |
4400 | ASC_DBG(2, "advansys_detect: scsi_register()\n"); |
4401 | shp = scsi_register(tpnt, sizeof(asc_board_t)); |
4402 | |
4403 | /* Save a pointer to the Scsi_host of each board found. */ |
4404 | asc_host[asc_board_count++] = shp; |
4405 | |
4406 | /* Initialize private per board data */ |
4407 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
4408 | memset(boardp, 0, sizeof(asc_board_t))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(asc_board_t ))) ? __constant_c_and_count_memset(((boardp)),((0x01010101UL *(unsigned char)(0))),((sizeof(asc_board_t)))) : __constant_c_memset (((boardp)),((0x01010101UL*(unsigned char)(0))),((sizeof(asc_board_t ))))) : (__builtin_constant_p((sizeof(asc_board_t))) ? __memset_generic ((((boardp))),(((0))),(((sizeof(asc_board_t))))) : __memset_generic (((boardp)),((0)),((sizeof(asc_board_t)))))); |
4409 | boardp->id = asc_board_count - 1; |
4410 | |
4411 | /* |
4412 | * Handle both narrow and wide boards. |
4413 | * |
4414 | * If a Wide board was detected, set the board structure |
4415 | * wide board flag. Set-up the board structure based on |
4416 | * the board type. |
4417 | */ |
4418 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4419 | #ifdef ASC_CONFIG_PCI |
4420 | if (asc_bus[bus] == ASC_IS_PCI(0x0004) && |
4421 | pciConfig.deviceID == ASC_PCI_DEVICE_ID_23000x2300) { |
4422 | boardp->flags |= ASC_IS_WIDE_BOARD0x04; |
4423 | } |
4424 | #endif /* ASC_CONFIG_PCI */ |
4425 | #else /* version >= v2.1.93 */ |
4426 | #ifdef CONFIG_PCI1 |
4427 | if (asc_bus[bus] == ASC_IS_PCI(0x0004) && |
4428 | pci_devp->device == ASC_PCI_DEVICE_ID_23000x2300) { |
4429 | boardp->flags |= ASC_IS_WIDE_BOARD0x04; |
4430 | } |
4431 | #endif /* CONFIG_PCI */ |
4432 | #endif /* version >= v2.1.93 */ |
4433 | |
4434 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4435 | ASC_DBG(1, "advansys_detect: narrow board\n"); |
4436 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
4437 | asc_dvc_varp->bus_type = asc_bus[bus]; |
4438 | asc_dvc_varp->drv_ptr = (ulong) boardp; |
4439 | asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg; |
4440 | asc_dvc_varp->cfg->overrun_buf = &overrun_buf[0]; |
4441 | asc_dvc_varp->iop_base = iop; |
4442 | asc_dvc_varp->isr_callback = (Ptr2Funculong) asc_isr_callback; |
4443 | } else { |
4444 | ASC_DBG(1, "advansys_detect: wide board\n"); |
4445 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
4446 | adv_dvc_varp->drv_ptr = (ulong) boardp; |
4447 | adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg; |
4448 | adv_dvc_varp->isr_callback = (Ptr2Funculong) adv_isr_callback; |
4449 | |
4450 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4451 | adv_dvc_varp->iop_base = iop; |
4452 | #else /* version >= v1,3,0 */ |
4453 | /* |
4454 | * Map the board's registers into virtual memory for |
4455 | * PCI slave access. Only memory accesses are used to |
4456 | * access the board's registers. |
4457 | * |
4458 | * Note: The PCI register base address is not always |
4459 | * page aligned, but the address passed to ioremap() |
4460 | * must be page aligned. It is guaranteed that the |
4461 | * PCI register base address will not cross a page |
4462 | * boundary. |
4463 | */ |
4464 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4465 | #ifdef ASC_CONFIG_PCI |
4466 | pci_memory_address = pciConfig.baseAddress[1]; |
4467 | if ((boardp->ioremap_addr = |
4468 | ioremapvremap(pci_memory_address & PAGE_MASK((1 << 12)-1), |
4469 | PAGE_SIZE(1 << 12))) == 0) { |
4470 | ASC_PRINT3({ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); } |
4471 | "advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n",{ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); } |
4472 | boardp->id, pci_memory_address, ADV_CONDOR_IOLEN){ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); }; |
4473 | scsi_unregister(shp); |
4474 | asc_board_count--; |
4475 | continue; |
4476 | } |
4477 | adv_dvc_varp->iop_base = (AdvPortAddrunsigned long) |
4478 | (boardp->ioremap_addr + |
4479 | (pci_memory_address - (pci_memory_address & PAGE_MASK((1 << 12)-1)))); |
4480 | #endif /* ASC_CONFIG_PCI */ |
4481 | #else /* version >= v2.1.93 */ |
4482 | #ifdef CONFIG_PCI1 |
4483 | pci_memory_address = pci_devp->base_address[1]; |
4484 | if ((boardp->ioremap_addr = |
4485 | ioremapvremap(pci_memory_address & PAGE_MASK((1 << 12)-1), |
4486 | PAGE_SIZE(1 << 12))) == 0) { |
4487 | ASC_PRINT3({ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); } |
4488 | "advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n",{ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); } |
4489 | boardp->id, pci_memory_address, ADV_CONDOR_IOLEN){ printk("advansys: "); printk(("advansys_detect: board %d: ioremap(%lx, %d) returned NULL\n" ), (boardp->id), (pci_memory_address), (0x40)); }; |
4490 | scsi_unregister(shp); |
4491 | asc_board_count--; |
4492 | continue; |
4493 | } |
4494 | adv_dvc_varp->iop_base = (AdvPortAddrunsigned long) |
4495 | (boardp->ioremap_addr + |
4496 | (pci_memory_address - (pci_memory_address & PAGE_MASK((1 << 12)-1)))); |
4497 | #endif /* CONFIG_PCI */ |
4498 | #endif /* version >= v2.1.93 */ |
4499 | #endif /* version >= v1,3,0 */ |
4500 | |
4501 | /* |
4502 | * Even though it isn't used to access the board in |
4503 | * kernels greater than or equal to v1.3.0, save |
4504 | * the I/O Port address so that it can be reported and |
4505 | * displayed. |
4506 | */ |
4507 | boardp->ioport = iop; |
4508 | } |
4509 | |
4510 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4511 | /* |
4512 | * Allocate buffer for printing information from |
4513 | * /proc/scsi/advansys/[0...]. |
4514 | */ |
4515 | if ((boardp->prtbuf = |
4516 | kmalloclinux_kmalloc(ASC_PRTBUF_SIZE2048, GFP_ATOMIC0x01)) == NULL((void *) 0)) { |
4517 | ASC_PRINT3({ printk("advansys: "); printk(("advansys_detect: board %d: kmalloc(%d, %d) returned NULL\n" ), (boardp->id), (2048), (0x01)); } |
4518 | "advansys_detect: board %d: kmalloc(%d, %d) returned NULL\n",{ printk("advansys: "); printk(("advansys_detect: board %d: kmalloc(%d, %d) returned NULL\n" ), (boardp->id), (2048), (0x01)); } |
4519 | boardp->id, ASC_PRTBUF_SIZE, GFP_ATOMIC){ printk("advansys: "); printk(("advansys_detect: board %d: kmalloc(%d, %d) returned NULL\n" ), (boardp->id), (2048), (0x01)); }; |
4520 | scsi_unregister(shp); |
4521 | asc_board_count--; |
4522 | continue; |
4523 | } |
4524 | #endif /* version >= v1.3.0 */ |
4525 | |
4526 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4527 | /* |
4528 | * Set the board bus type and PCI IRQ before |
4529 | * calling AscInitGetConfig(). |
4530 | */ |
4531 | switch (asc_dvc_varp->bus_type) { |
4532 | case ASC_IS_ISA(0x0001): |
4533 | shp->unchecked_isa_dma = TRUE1; |
4534 | share_irq = FALSE0; |
4535 | break; |
4536 | case ASC_IS_VL(0x0040): |
4537 | shp->unchecked_isa_dma = FALSE0; |
4538 | share_irq = FALSE0; |
4539 | break; |
4540 | case ASC_IS_EISA(0x0002): |
4541 | shp->unchecked_isa_dma = FALSE0; |
4542 | share_irq = TRUE1; |
4543 | break; |
4544 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4545 | #ifdef ASC_CONFIG_PCI |
4546 | case ASC_IS_PCI(0x0004): |
4547 | shp->irq = asc_dvc_varp->irq_no = pciConfig.irqLine; |
4548 | asc_dvc_varp->cfg->pci_device_id = pciConfig.deviceID; |
4549 | asc_dvc_varp->cfg->pci_slot_info = |
4550 | ASC_PCI_MKID(pciDevice.busNumber,((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)) |
4551 | pciDevice.slotFound,((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)) |
4552 | pciDevice.devFunc)((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)); |
4553 | shp->unchecked_isa_dma = FALSE0; |
4554 | share_irq = TRUE1; |
4555 | break; |
4556 | #endif /* ASC_CONFIG_PCI */ |
4557 | #else /* version >= v2.1.93 */ |
4558 | #ifdef CONFIG_PCI1 |
4559 | case ASC_IS_PCI(0x0004): |
4560 | shp->irq = asc_dvc_varp->irq_no = pci_devp->irq; |
4561 | asc_dvc_varp->cfg->pci_device_id = pci_devp->device; |
4562 | asc_dvc_varp->cfg->pci_slot_info = |
4563 | ASC_PCI_MKID(pci_devp->bus->number,((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)) |
4564 | PCI_SLOT(pci_devp->devfn),((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)) |
4565 | PCI_FUNC(pci_devp->devfn))((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)); |
4566 | shp->unchecked_isa_dma = FALSE0; |
4567 | share_irq = TRUE1; |
4568 | break; |
4569 | #endif /* CONFIG_PCI */ |
4570 | #endif /* version >= v2.1.93 */ |
4571 | default: |
4572 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_detect: board %d: unknown adapter type: %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); } |
4573 | "advansys_detect: board %d: unknown adapter type: %d\n",{ printk("advansys: "); printk(("advansys_detect: board %d: unknown adapter type: %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); } |
4574 | boardp->id, asc_dvc_varp->bus_type){ printk("advansys: "); printk(("advansys_detect: board %d: unknown adapter type: %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); }; |
4575 | shp->unchecked_isa_dma = TRUE1; |
4576 | share_irq = FALSE0; |
4577 | break; |
4578 | } |
4579 | } else { |
4580 | /* |
4581 | * For Wide boards set PCI information before calling |
4582 | * AdvInitGetConfig(). |
4583 | */ |
4584 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
4585 | #ifdef ASC_CONFIG_PCI |
4586 | shp->irq = adv_dvc_varp->irq_no = pciConfig.irqLine; |
4587 | adv_dvc_varp->cfg->pci_device_id = pciConfig.deviceID; |
4588 | adv_dvc_varp->cfg->pci_slot_info = |
4589 | ASC_PCI_MKID(pciDevice.busNumber,((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)) |
4590 | pciDevice.slotFound,((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)) |
4591 | pciDevice.devFunc)((((pciDevice.slotFound) & 0x1F) << 11) | (((pciDevice .devFunc) & 0x7) << 8) | ((pciDevice.busNumber) & 0xFF)); |
4592 | shp->unchecked_isa_dma = FALSE0; |
4593 | share_irq = TRUE1; |
4594 | #endif /* ASC_CONFIG_PCI */ |
4595 | #else /* version >= v2.1.93 */ |
4596 | #ifdef CONFIG_PCI1 |
4597 | shp->irq = adv_dvc_varp->irq_no = pci_devp->irq; |
4598 | adv_dvc_varp->cfg->pci_device_id = pci_devp->device; |
4599 | adv_dvc_varp->cfg->pci_slot_info = |
4600 | ASC_PCI_MKID(pci_devp->bus->number,((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)) |
4601 | PCI_SLOT(pci_devp->devfn),((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)) |
4602 | PCI_FUNC(pci_devp->devfn))((((PCI_SLOT(pci_devp->devfn)) & 0x1F) << 11) | ( ((PCI_FUNC(pci_devp->devfn)) & 0x7) << 8) | ((pci_devp ->bus->number) & 0xFF)); |
4603 | shp->unchecked_isa_dma = FALSE0; |
4604 | share_irq = TRUE1; |
4605 | #endif /* CONFIG_PCI */ |
4606 | #endif /* version >= v2.1.93 */ |
4607 | } |
4608 | |
4609 | /* |
4610 | * Read the board configuration. |
4611 | */ |
4612 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4613 | /* |
4614 | * NOTE: AscInitGetConfig() may change the board's |
4615 | * bus_type value. The asc_bus[bus] value should no |
4616 | * longer be used. If the bus_type field must be |
4617 | * referenced only use the bit-wise AND operator "&". |
4618 | */ |
4619 | ASC_DBG(2, "advansys_detect: AscInitGetConfig()\n"); |
4620 | switch(ret = AscInitGetConfig(asc_dvc_varp)) { |
4621 | case 0: /* No error */ |
4622 | break; |
4623 | case ASC_WARN_IO_PORT_ROTATE0x0001: |
4624 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port address modified\n" ), (boardp->id)); } |
4625 | "AscInitGetConfig: board %d: I/O port address modified\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port address modified\n" ), (boardp->id)); } |
4626 | boardp->id){ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port address modified\n" ), (boardp->id)); }; |
4627 | break; |
4628 | case ASC_WARN_AUTO_CONFIG0x0008: |
4629 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); } |
4630 | "AscInitGetConfig: board %d: I/O port increment switch enabled\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); } |
4631 | boardp->id){ printk("advansys: "); printk(("AscInitGetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); }; |
4632 | break; |
4633 | case ASC_WARN_EEPROM_CHKSUM0x0002: |
4634 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitGetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); } |
4635 | "AscInitGetConfig: board %d: EEPROM checksum error\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); } |
4636 | boardp->id){ printk("advansys: "); printk(("AscInitGetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); }; |
4637 | break; |
4638 | case ASC_WARN_IRQ_MODIFIED0x0004: |
4639 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitGetConfig: board %d: IRQ modified\n" ), (boardp->id)); } |
4640 | "AscInitGetConfig: board %d: IRQ modified\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: IRQ modified\n" ), (boardp->id)); } |
4641 | boardp->id){ printk("advansys: "); printk(("AscInitGetConfig: board %d: IRQ modified\n" ), (boardp->id)); }; |
4642 | break; |
4643 | case ASC_WARN_CMD_QNG_CONFLICT0x0010: |
4644 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitGetConfig: board %d: tag queuing enabled w/o disconnects\n" ), (boardp->id)); } |
4645 | "AscInitGetConfig: board %d: tag queuing enabled w/o disconnects\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: tag queuing enabled w/o disconnects\n" ), (boardp->id)); } |
4646 | boardp->id){ printk("advansys: "); printk(("AscInitGetConfig: board %d: tag queuing enabled w/o disconnects\n" ), (boardp->id)); }; |
4647 | break; |
4648 | default: |
4649 | ASC_PRINT2({ printk("advansys: "); printk(("AscInitGetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); } |
4650 | "AscInitGetConfig: board %d: unknown warning: %x\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); } |
4651 | boardp->id, ret){ printk("advansys: "); printk(("AscInitGetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); }; |
4652 | break; |
4653 | } |
4654 | if ((err_code = asc_dvc_varp->err_code) != 0) { |
4655 | ASC_PRINT3({ printk("advansys: "); printk(("AscInitGetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4656 | "AscInitGetConfig: board %d error: init_state %x, err_code %x\n",{ printk("advansys: "); printk(("AscInitGetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4657 | boardp->id, asc_dvc_varp->init_state,{ printk("advansys: "); printk(("AscInitGetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4658 | asc_dvc_varp->err_code){ printk("advansys: "); printk(("AscInitGetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); }; |
4659 | } |
4660 | } else { |
4661 | ASC_DBG(2, "advansys_detect: AdvInitGetConfig()\n"); |
4662 | if ((ret = AdvInitGetConfig(adv_dvc_varp)) != 0) { |
4663 | ASC_PRINT2("AdvInitGetConfig: board %d: warning: %x\n",{ printk("advansys: "); printk(("AdvInitGetConfig: board %d: warning: %x\n" ), (boardp->id), (ret)); } |
4664 | boardp->id, ret){ printk("advansys: "); printk(("AdvInitGetConfig: board %d: warning: %x\n" ), (boardp->id), (ret)); }; |
4665 | } |
4666 | if ((err_code = adv_dvc_varp->err_code) != 0) { |
4667 | ASC_PRINT2({ printk("advansys: "); printk(("AdvInitGetConfig: board %d error: err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
4668 | "AdvInitGetConfig: board %d error: err_code %x\n",{ printk("advansys: "); printk(("AdvInitGetConfig: board %d error: err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
4669 | boardp->id, adv_dvc_varp->err_code){ printk("advansys: "); printk(("AdvInitGetConfig: board %d error: err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); }; |
4670 | } |
4671 | } |
4672 | |
4673 | if (err_code != 0) { |
4674 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4675 | kfreelinux_kfree(boardp->prtbuf); |
4676 | #endif /* version >= v1.3.0 */ |
4677 | scsi_unregister(shp); |
4678 | asc_board_count--; |
4679 | continue; |
4680 | } |
4681 | |
4682 | /* |
4683 | * Save the EEPROM configuration so that it can be displayed |
4684 | * from /proc/scsi/advansys/[0...]. |
4685 | */ |
4686 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4687 | |
4688 | ASCEEP_CONFIG *ep; |
4689 | |
4690 | /* |
4691 | * Set the adapter's target id bit in the 'init_tidmask' field. |
4692 | */ |
4693 | boardp->init_tidmask |= |
4694 | ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id)(0x01 << ((asc_dvc_varp->cfg->chip_scsi_id) & 15)); |
4695 | |
4696 | /* |
4697 | * Save EEPROM settings for the board. |
4698 | */ |
4699 | ep = &boardp->eep_config.asc_eep; |
4700 | |
4701 | ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable; |
4702 | ep->disc_enable = asc_dvc_varp->cfg->disc_enable; |
4703 | ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled; |
4704 | ep->isa_dma_speed = asc_dvc_varp->cfg->isa_dma_speed; |
4705 | ep->start_motor = asc_dvc_varp->start_motor; |
4706 | ep->cntl = asc_dvc_varp->dvc_cntl; |
4707 | ep->no_scam = asc_dvc_varp->no_scam; |
4708 | ep->max_total_qng = asc_dvc_varp->max_total_qng; |
4709 | ep->chip_scsi_id = asc_dvc_varp->cfg->chip_scsi_id; |
4710 | /* 'max_tag_qng' is set to the same value for every device. */ |
4711 | ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0]; |
4712 | ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0]; |
4713 | ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1]; |
4714 | ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2]; |
4715 | ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3]; |
4716 | ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4]; |
4717 | ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5]; |
4718 | ep->adapter_info[6] = asc_dvc_varp->cfg->adapter_info[6]; |
4719 | |
4720 | /* |
4721 | * Modify board configuration. |
4722 | */ |
4723 | ASC_DBG(2, "advansys_detect: AscInitSetConfig()\n"); |
4724 | switch (ret = AscInitSetConfig(asc_dvc_varp)) { |
4725 | case 0: /* No error. */ |
4726 | break; |
4727 | case ASC_WARN_IO_PORT_ROTATE0x0001: |
4728 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port address modified\n" ), (boardp->id)); } |
4729 | "AscInitSetConfig: board %d: I/O port address modified\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port address modified\n" ), (boardp->id)); } |
4730 | boardp->id){ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port address modified\n" ), (boardp->id)); }; |
4731 | break; |
4732 | case ASC_WARN_AUTO_CONFIG0x0008: |
4733 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); } |
4734 | "AscInitSetConfig: board %d: I/O port increment switch enabled\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); } |
4735 | boardp->id){ printk("advansys: "); printk(("AscInitSetConfig: board %d: I/O port increment switch enabled\n" ), (boardp->id)); }; |
4736 | break; |
4737 | case ASC_WARN_EEPROM_CHKSUM0x0002: |
4738 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitSetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); } |
4739 | "AscInitSetConfig: board %d: EEPROM checksum error\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); } |
4740 | boardp->id){ printk("advansys: "); printk(("AscInitSetConfig: board %d: EEPROM checksum error\n" ), (boardp->id)); }; |
4741 | break; |
4742 | case ASC_WARN_IRQ_MODIFIED0x0004: |
4743 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitSetConfig: board %d: IRQ modified\n" ), (boardp->id)); } |
4744 | "AscInitSetConfig: board %d: IRQ modified\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: IRQ modified\n" ), (boardp->id)); } |
4745 | boardp->id){ printk("advansys: "); printk(("AscInitSetConfig: board %d: IRQ modified\n" ), (boardp->id)); }; |
4746 | break; |
4747 | case ASC_WARN_CMD_QNG_CONFLICT0x0010: |
4748 | ASC_PRINT1({ printk("advansys: "); printk(("AscInitSetConfig: board %d: tag queuing w/o disconnects\n" ), (boardp->id)); } |
4749 | "AscInitSetConfig: board %d: tag queuing w/o disconnects\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: tag queuing w/o disconnects\n" ), (boardp->id)); } |
4750 | boardp->id){ printk("advansys: "); printk(("AscInitSetConfig: board %d: tag queuing w/o disconnects\n" ), (boardp->id)); }; |
4751 | break; |
4752 | default: |
4753 | ASC_PRINT2({ printk("advansys: "); printk(("AscInitSetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); } |
4754 | "AscInitSetConfig: board %d: unknown warning: %x\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); } |
4755 | boardp->id, ret){ printk("advansys: "); printk(("AscInitSetConfig: board %d: unknown warning: %x\n" ), (boardp->id), (ret)); }; |
4756 | break; |
4757 | } |
4758 | if (asc_dvc_varp->err_code != 0) { |
4759 | ASC_PRINT3({ printk("advansys: "); printk(("AscInitSetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4760 | "AscInitSetConfig: board %d error: init_state %x, err_code %x\n",{ printk("advansys: "); printk(("AscInitSetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4761 | boardp->id, asc_dvc_varp->init_state,{ printk("advansys: "); printk(("AscInitSetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); } |
4762 | asc_dvc_varp->err_code){ printk("advansys: "); printk(("AscInitSetConfig: board %d error: init_state %x, err_code %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (asc_dvc_varp ->err_code)); }; |
4763 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4764 | kfreelinux_kfree(boardp->prtbuf); |
4765 | #endif /* version >= v1.3.0 */ |
4766 | scsi_unregister(shp); |
4767 | asc_board_count--; |
4768 | continue; |
4769 | } |
4770 | |
4771 | /* |
4772 | * Finish initializing the 'Scsi_Host' structure. |
4773 | */ |
4774 | /* AscInitSetConfig() will set the IRQ for non-PCI boards. */ |
4775 | if ((asc_dvc_varp->bus_type & ASC_IS_PCI(0x0004)) == 0) { |
4776 | shp->irq = asc_dvc_varp->irq_no; |
4777 | } |
4778 | } else { |
4779 | |
4780 | ADVEEP_CONFIG *ep; |
4781 | |
4782 | /* |
4783 | * Save Wide EEP Configuration Information. |
4784 | */ |
4785 | ep = &boardp->eep_config.adv_eep; |
4786 | |
4787 | ep->adapter_scsi_id = adv_dvc_varp->chip_scsi_id; |
4788 | ep->max_host_qng = adv_dvc_varp->max_host_qng; |
4789 | ep->max_dvc_qng = adv_dvc_varp->max_dvc_qng; |
4790 | ep->termination = adv_dvc_varp->cfg->termination; |
4791 | ep->disc_enable = adv_dvc_varp->cfg->disc_enable; |
4792 | ep->bios_ctrl = adv_dvc_varp->bios_ctrl; |
4793 | ep->wdtr_able = adv_dvc_varp->wdtr_able; |
4794 | ep->sdtr_able = adv_dvc_varp->sdtr_able; |
4795 | ep->ultra_able = adv_dvc_varp->ultra_able; |
4796 | ep->tagqng_able = adv_dvc_varp->tagqng_able; |
4797 | ep->start_motor = adv_dvc_varp->start_motor; |
4798 | ep->scsi_reset_delay = adv_dvc_varp->scsi_reset_wait; |
4799 | ep->bios_boot_delay = adv_dvc_varp->cfg->bios_boot_wait; |
4800 | ep->serial_number_word1 = adv_dvc_varp->cfg->serial1; |
4801 | ep->serial_number_word2 = adv_dvc_varp->cfg->serial2; |
4802 | ep->serial_number_word3 = adv_dvc_varp->cfg->serial3; |
4803 | |
4804 | /* |
4805 | * Set the adapter's target id bit in the 'init_tidmask' field. |
4806 | */ |
4807 | boardp->init_tidmask |= |
4808 | ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id)(0x01 << ((adv_dvc_varp->chip_scsi_id) & 15)); |
4809 | |
4810 | /* |
4811 | * Finish initializing the 'Scsi_Host' structure. |
4812 | */ |
4813 | shp->irq = adv_dvc_varp->irq_no; |
4814 | } |
4815 | |
4816 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
4817 | /* |
4818 | * Channels are numbered beginning with 0. For AdvanSys One host |
4819 | * structure supports one channel. Multi-channel boards have a |
4820 | * separate host structure for each channel. |
4821 | */ |
4822 | shp->max_channel = 0; |
4823 | #endif /* version >= v1.3.89 */ |
4824 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4825 | shp->max_id = ASC_MAX_TID7 + 1; |
4826 | shp->max_lun = ASC_MAX_LUN7 + 1; |
4827 | |
4828 | shp->io_port = asc_dvc_varp->iop_base; |
4829 | shp->n_io_port = ASC_IOADR_GAP0x10; |
4830 | shp->this_id = asc_dvc_varp->cfg->chip_scsi_id; |
4831 | |
4832 | /* Set maximum number of queues the adapter can handle. */ |
4833 | shp->can_queue = asc_dvc_varp->max_total_qng; |
4834 | } else { |
4835 | shp->max_id = ADV_MAX_TID15 + 1; |
4836 | shp->max_lun = ADV_MAX_LUN7 + 1; |
4837 | |
4838 | /* |
4839 | * Save the I/O Port address and length even though the |
4840 | * in v1.3.0 and greater kernels the region is not used |
4841 | * by a Wide board. Instead the board is accessed with |
4842 | * Memory Mapped I/O. |
4843 | */ |
4844 | shp->io_port = iop; |
4845 | shp->n_io_port = ADV_CONDOR_IOLEN0x40; |
4846 | |
4847 | shp->this_id = adv_dvc_varp->chip_scsi_id; |
4848 | |
4849 | /* Set maximum number of queues the adapter can handle. */ |
4850 | shp->can_queue = adv_dvc_varp->max_host_qng; |
4851 | } |
4852 | |
4853 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
4854 | /* |
4855 | * In old kernels without tag queuing support and with memory |
4856 | * allocation problems set a conservative 'cmd_per_lun' value. |
4857 | */ |
4858 | #ifdef MODULE |
4859 | shp->cmd_per_lun = 1; |
4860 | #else /* MODULE */ |
4861 | shp->cmd_per_lun = 4; |
4862 | #endif /* MODULE */ |
4863 | ASC_DBG1(1, "advansys_detect: cmd_per_lun: %d\n", shp->cmd_per_lun); |
4864 | #else /* version >= v1.3.89 */ |
4865 | /* |
4866 | * Following v1.3.89, 'cmd_per_lun' is no longer needed |
4867 | * and should be set to zero. |
4868 | * |
4869 | * But because of a bug introduced in v1.3.89 if the driver is |
4870 | * compiled as a module and 'cmd_per_lun' is zero, the Mid-Level |
4871 | * SCSI function 'allocate_device' will panic. To allow the driver |
4872 | * to work as a module in these kernels set 'cmd_per_lun' to 1. |
4873 | */ |
4874 | #ifdef MODULE |
4875 | shp->cmd_per_lun = 1; |
4876 | #else /* MODULE */ |
4877 | shp->cmd_per_lun = 0; |
4878 | #endif /* MODULE */ |
4879 | /* |
4880 | * Use the host 'select_queue_depths' function to determine |
4881 | * the number of commands to queue per device. |
4882 | */ |
4883 | shp->select_queue_depths = advansys_select_queue_depths; |
4884 | #endif /* version >= v1.3.89 */ |
4885 | |
4886 | /* |
4887 | * Set the maximum number of scatter-gather elements the |
4888 | * adapter can handle. |
4889 | */ |
4890 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4891 | /* |
4892 | * Allow two commands with 'sg_tablesize' scatter-gather |
4893 | * elements to be executed simultaneously. This value is |
4894 | * the theoretical hardware limit. It may be decreased |
4895 | * below. |
4896 | */ |
4897 | shp->sg_tablesize = |
4898 | (((asc_dvc_varp->max_total_qng - 2) / 2) * |
4899 | ASC_SG_LIST_PER_Q7) + 1; |
4900 | } else { |
4901 | shp->sg_tablesize = ADV_MAX_SG_LIST64; |
4902 | } |
4903 | |
4904 | #ifdef MODULE |
4905 | /* |
4906 | * If the driver is compiled as a module, set a limit on the |
4907 | * 'sg_tablesize' value to prevent memory allocation failures. |
4908 | * Memory allocation errors are more likely to occur at module |
4909 | * load time, then at driver initialization time. |
4910 | */ |
4911 | if (shp->sg_tablesize > 64) { |
4912 | shp->sg_tablesize = 64; |
4913 | } |
4914 | #endif /* MODULE */ |
4915 | |
4916 | /* |
4917 | * The value of 'sg_tablesize' can not exceed the SCSI |
4918 | * mid-level driver definition of SG_ALL. SG_ALL also |
4919 | * must not be exceeded, because it is used to define the |
4920 | * size of the scatter-gather table in 'struct asc_sg_head'. |
4921 | */ |
4922 | if (shp->sg_tablesize > SG_ALL0xff) { |
4923 | shp->sg_tablesize = SG_ALL0xff; |
4924 | } |
4925 | |
4926 | ASC_DBG1(1, "advansys_detect: sg_tablesize: %d\n", |
4927 | shp->sg_tablesize); |
4928 | |
4929 | /* BIOS start address. */ |
4930 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4931 | shp->base = (char *) ((ulong) AscGetChipBiosAddress( |
4932 | asc_dvc_varp->iop_base, |
4933 | asc_dvc_varp->bus_type)); |
4934 | } else { |
4935 | /* |
4936 | * Fill-in BIOS board variables. The Wide BIOS saves |
4937 | * information in LRAM that is used by the driver. |
4938 | */ |
4939 | AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_SIGNATURE,do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x58))); (boardp->bios_signature) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0) |
4940 | boardp->bios_signature)do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x58))); (boardp->bios_signature) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0); |
4941 | AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_VERSION,do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x5A))); (boardp->bios_version) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0) |
4942 | boardp->bios_version)do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x5A))); (boardp->bios_version) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0); |
4943 | AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_CODESEG,do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x54))); (boardp->bios_codeseg) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0) |
4944 | boardp->bios_codeseg)do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x54))); (boardp->bios_codeseg) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0); |
4945 | AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_CODELEN,do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x56))); (boardp->bios_codelen) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0) |
4946 | boardp->bios_codelen)do { ((*(volatile unsigned short *) ((adv_dvc_varp->iop_base ) + 0x04)) = ((0x56))); (boardp->bios_codelen) = (*(volatile unsigned short *) ((adv_dvc_varp->iop_base) + 0x06)); } while (0); |
4947 | |
4948 | ASC_DBG2(1, |
4949 | "advansys_detect: bios_signature %x, bios_version %x\n", |
4950 | boardp->bios_signature, boardp->bios_version); |
4951 | |
4952 | ASC_DBG2(1, |
4953 | "advansys_detect: bios_codeseg %x, bios_codelen %x\n", |
4954 | boardp->bios_codeseg, boardp->bios_codelen); |
4955 | |
4956 | /* |
4957 | * If the BIOS saved a valid signature, then fill in |
4958 | * the BIOS code segment base address. |
4959 | */ |
4960 | if (boardp->bios_signature == 0x55AA) { |
4961 | /* |
4962 | * Convert x86 realmode code segment to a linear |
4963 | * address by shifting left 4. |
4964 | */ |
4965 | shp->base = (uchar *) (boardp->bios_codeseg << 4); |
4966 | } else { |
4967 | shp->base = 0; |
4968 | } |
4969 | } |
4970 | |
4971 | /* |
4972 | * Register Board Resources - I/O Port, DMA, IRQ |
4973 | */ |
4974 | |
4975 | /* Register I/O port range. */ |
4976 | ASC_DBG(2, "advansys_detect: request_region()\n"); |
4977 | request_region(shp->io_port, shp->n_io_port, "advansys"); |
4978 | |
4979 | /* Register DMA Channel for Narrow boards. */ |
4980 | shp->dma_channel = NO_ISA_DMA0xff; /* Default to no ISA DMA. */ |
4981 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
4982 | /* Register DMA channel for ISA bus. */ |
4983 | if (asc_dvc_varp->bus_type & ASC_IS_ISA(0x0001)) { |
4984 | shp->dma_channel = asc_dvc_varp->cfg->isa_dma_channel; |
4985 | if ((ret = |
4986 | request_dma(shp->dma_channel, "advansys")) != 0) { |
4987 | ASC_PRINT3({ printk("advansys: "); printk(("advansys_detect: board %d: request_dma() %d failed %d\n" ), (boardp->id), (shp->dma_channel), (ret)); } |
4988 | "advansys_detect: board %d: request_dma() %d failed %d\n",{ printk("advansys: "); printk(("advansys_detect: board %d: request_dma() %d failed %d\n" ), (boardp->id), (shp->dma_channel), (ret)); } |
4989 | boardp->id, shp->dma_channel, ret){ printk("advansys: "); printk(("advansys_detect: board %d: request_dma() %d failed %d\n" ), (boardp->id), (shp->dma_channel), (ret)); }; |
4990 | release_region(shp->io_port, shp->n_io_port); |
4991 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
4992 | kfreelinux_kfree(boardp->prtbuf); |
4993 | #endif /* version >= v1.3.0 */ |
4994 | scsi_unregister(shp); |
4995 | asc_board_count--; |
4996 | continue; |
4997 | } |
4998 | AscEnableIsaDma(shp->dma_channel); |
4999 | } |
5000 | } |
5001 | |
5002 | /* Register IRQ Number. */ |
5003 | ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq); |
5004 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,70)(((1) * 65536) + ((3) * 256) + (70)) |
5005 | if ((ret = request_irq(shp->irq, advansys_interrupt, |
5006 | SA_INTERRUPT0x20000000, "advansys")) != 0) |
5007 | #else /* version >= v1.3.70 */ |
5008 | /* |
5009 | * If request_irq() fails with the SA_INTERRUPT flag set, |
5010 | * then try again without the SA_INTERRUPT flag set. This |
5011 | * allows IRQ sharing to work even with other drivers that |
5012 | * do not set the SA_INTERRUPT flag. |
5013 | * |
5014 | * If SA_INTERRUPT is not set, then interrupts are enabled |
5015 | * before the driver interrupt function is called. |
5016 | */ |
5017 | if (((ret = request_irq(shp->irq, advansys_interrupt, |
5018 | SA_INTERRUPT0x20000000 | (share_irq == TRUE1 ? SA_SHIRQ0x04000000 : 0), |
5019 | "advansys", boardp)) != 0) && |
5020 | ((ret = request_irq(shp->irq, advansys_interrupt, |
5021 | (share_irq == TRUE1 ? SA_SHIRQ0x04000000 : 0), |
5022 | "advansys", boardp)) != 0)) |
5023 | #endif /* version >= v1.3.70 */ |
5024 | { |
5025 | if (ret == -EBUSY16) { |
5026 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d already in use.\n" ), (boardp->id), (shp->irq)); } |
5027 | "advansys_detect: board %d: request_irq(): IRQ %d already in use.\n",{ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d already in use.\n" ), (boardp->id), (shp->irq)); } |
5028 | boardp->id, shp->irq){ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d already in use.\n" ), (boardp->id), (shp->irq)); }; |
5029 | } else if (ret == -EINVAL22) { |
5030 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d not valid.\n" ), (boardp->id), (shp->irq)); } |
5031 | "advansys_detect: board %d: request_irq(): IRQ %d not valid.\n",{ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d not valid.\n" ), (boardp->id), (shp->irq)); } |
5032 | boardp->id, shp->irq){ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d not valid.\n" ), (boardp->id), (shp->irq)); }; |
5033 | } else { |
5034 | ASC_PRINT3({ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d failed with %d\n" ), (boardp->id), (shp->irq), (ret)); } |
5035 | "advansys_detect: board %d: request_irq(): IRQ %d failed with %d\n",{ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d failed with %d\n" ), (boardp->id), (shp->irq), (ret)); } |
5036 | boardp->id, shp->irq, ret){ printk("advansys: "); printk(("advansys_detect: board %d: request_irq(): IRQ %d failed with %d\n" ), (boardp->id), (shp->irq), (ret)); }; |
5037 | } |
5038 | release_region(shp->io_port, shp->n_io_port); |
5039 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5040 | iounmapvfree(boardp->ioremap_addr); |
5041 | #endif /* version >= v1,3,0 */ |
5042 | if (shp->dma_channel != NO_ISA_DMA0xff) { |
5043 | free_dma(shp->dma_channel); |
5044 | } |
5045 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5046 | kfreelinux_kfree(boardp->prtbuf); |
5047 | #endif /* version >= v1.3.0 */ |
5048 | scsi_unregister(shp); |
5049 | asc_board_count--; |
5050 | continue; |
5051 | } |
5052 | |
5053 | /* |
5054 | * Initialize board RISC chip and enable interrupts. |
5055 | */ |
5056 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
5057 | ASC_DBG(2, "advansys_detect: AscInitAsc1000Driver()\n"); |
5058 | warn_code = AscInitAsc1000Driver(asc_dvc_varp); |
5059 | err_code = asc_dvc_varp->err_code; |
5060 | |
5061 | if (warn_code || err_code) { |
5062 | ASC_PRINT4({ printk("advansys: "); printk(("AscInitAsc1000Driver: board %d: error: init_state %x, warn %x error %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (warn_code ), (err_code)); } |
5063 | "AscInitAsc1000Driver: board %d: error: init_state %x, warn %x error %x\n",{ printk("advansys: "); printk(("AscInitAsc1000Driver: board %d: error: init_state %x, warn %x error %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (warn_code ), (err_code)); } |
5064 | boardp->id, asc_dvc_varp->init_state,{ printk("advansys: "); printk(("AscInitAsc1000Driver: board %d: error: init_state %x, warn %x error %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (warn_code ), (err_code)); } |
5065 | warn_code, err_code){ printk("advansys: "); printk(("AscInitAsc1000Driver: board %d: error: init_state %x, warn %x error %x\n" ), (boardp->id), (asc_dvc_varp->init_state), (warn_code ), (err_code)); }; |
5066 | } |
5067 | } else { |
5068 | int req_cnt; |
5069 | adv_req_t *reqp = NULL((void *) 0); |
5070 | int sg_cnt; |
5071 | adv_sgblk_t *sgp = NULL((void *) 0); |
5072 | |
5073 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5074 | req_cnt = sizeof(adv_req_buf)/sizeof(adv_req_t); |
5075 | sg_cnt = sizeof(adv_sgblk_buf)/sizeof(adv_sgblk_t); |
5076 | reqp = (adv_req_t *) &adv_req_buf[0]; |
5077 | sgp = (adv_sgblk_t *) &adv_sgblk_buf[0]; |
5078 | #else /* version >= v1.3.0 */ |
5079 | /* |
5080 | * Allocate up to 'max_host_qng' request structures for |
5081 | * the Wide board. |
5082 | */ |
5083 | for (req_cnt = adv_dvc_varp->max_host_qng; |
5084 | req_cnt > 0; req_cnt--) { |
5085 | |
5086 | reqp = (adv_req_t *) |
5087 | kmalloclinux_kmalloc(sizeof(adv_req_t) * req_cnt, GFP_ATOMIC0x01); |
5088 | |
5089 | ASC_DBG3(1, |
5090 | "advansys_detect: reqp %x, req_cnt %d, bytes %d\n", |
5091 | (unsigned) reqp, req_cnt, sizeof(adv_req_t) * req_cnt); |
5092 | |
5093 | if (reqp != NULL((void *) 0)) { |
5094 | break; |
5095 | } |
5096 | } |
5097 | |
5098 | /* |
5099 | * Allocate up to ADV_TOT_SG_LIST request structures for |
5100 | * the Wide board. |
5101 | */ |
5102 | for (sg_cnt = ADV_TOT_SG_LIST64; sg_cnt > 0; sg_cnt--) { |
5103 | |
5104 | sgp = (adv_sgblk_t *) |
5105 | kmalloclinux_kmalloc(sizeof(adv_sgblk_t) * sg_cnt, GFP_ATOMIC0x01); |
5106 | |
5107 | ASC_DBG3(1, |
5108 | "advansys_detect: sgp %x, sg_cnt %d, bytes %d\n", |
5109 | (unsigned) sgp, sg_cnt, sizeof(adv_sgblk_t) * sg_cnt); |
5110 | |
5111 | if (sgp != NULL((void *) 0)) { |
5112 | break; |
5113 | } |
5114 | } |
5115 | #endif /* version >= v1.3.0 */ |
5116 | |
5117 | /* |
5118 | * If no request structures or scatter-gather structures could |
5119 | * be allocated, then return an error. Otherwise continue with |
5120 | * initialization. |
5121 | */ |
5122 | if (reqp == NULL((void *) 0)) { |
5123 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_req_t buffer.\n" ), (boardp->id)); } |
5124 | "advansys_detect: board %d: error: failed to kmalloc() adv_req_t buffer.\n",{ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_req_t buffer.\n" ), (boardp->id)); } |
5125 | boardp->id){ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_req_t buffer.\n" ), (boardp->id)); }; |
5126 | err_code = ADV_ERROR(-1); |
5127 | } else if (sgp == NULL((void *) 0)) { |
5128 | kfreelinux_kfree(reqp); |
5129 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_sgblk_t buffer.\n" ), (boardp->id)); } |
5130 | "advansys_detect: board %d: error: failed to kmalloc() adv_sgblk_t buffer.\n",{ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_sgblk_t buffer.\n" ), (boardp->id)); } |
5131 | boardp->id){ printk("advansys: "); printk(("advansys_detect: board %d: error: failed to kmalloc() adv_sgblk_t buffer.\n" ), (boardp->id)); }; |
5132 | err_code = ADV_ERROR(-1); |
5133 | } else { |
5134 | |
5135 | /* |
5136 | * Save original pointer for kfree() in case the |
5137 | * driver is built as a module and can be unloaded. |
5138 | */ |
5139 | boardp->orig_reqp = reqp; |
5140 | |
5141 | /* |
5142 | * Point 'adv_reqp' to the request structures and |
5143 | * link them together. |
5144 | */ |
5145 | req_cnt--; |
5146 | reqp[req_cnt].next_reqp = NULL((void *) 0); |
5147 | for (; req_cnt > 0; req_cnt--) { |
5148 | reqp[req_cnt - 1].next_reqp = &reqp[req_cnt]; |
5149 | } |
5150 | boardp->adv_reqp = &reqp[0]; |
5151 | |
5152 | /* |
5153 | * Save original pointer for kfree() in case the |
5154 | * driver is built as a module and can be unloaded. |
5155 | */ |
5156 | boardp->orig_sgblkp = sgp; |
5157 | |
5158 | /* |
5159 | * Point 'adv_sgblkp' to the request structures and |
5160 | * link them together. |
5161 | */ |
5162 | sg_cnt--; |
5163 | sgp[sg_cnt].next_sgblkp = NULL((void *) 0); |
5164 | for (; sg_cnt > 0; sg_cnt--) { |
5165 | sgp[sg_cnt - 1].next_sgblkp = &sgp[sg_cnt]; |
5166 | } |
5167 | boardp->adv_sgblkp = &sgp[0]; |
5168 | |
5169 | ASC_DBG(2, "advansys_detect: AdvInitAsc3550Driver()\n"); |
5170 | warn_code = AdvInitAsc3550Driver(adv_dvc_varp); |
5171 | err_code = adv_dvc_varp->err_code; |
5172 | |
5173 | if (warn_code || err_code) { |
5174 | ASC_PRINT3({ printk("advansys: "); printk(("AdvInitAsc3550Driver: board %d: error: warn %x, error %x\n" ), (boardp->id), (warn_code), (adv_dvc_varp->err_code)) ; } |
5175 | "AdvInitAsc3550Driver: board %d: error: warn %x, error %x\n",{ printk("advansys: "); printk(("AdvInitAsc3550Driver: board %d: error: warn %x, error %x\n" ), (boardp->id), (warn_code), (adv_dvc_varp->err_code)) ; } |
5176 | boardp->id, warn_code, adv_dvc_varp->err_code){ printk("advansys: "); printk(("AdvInitAsc3550Driver: board %d: error: warn %x, error %x\n" ), (boardp->id), (warn_code), (adv_dvc_varp->err_code)) ; }; |
5177 | } |
5178 | } |
5179 | } |
5180 | |
5181 | if (err_code != 0) { |
5182 | release_region(shp->io_port, shp->n_io_port); |
5183 | if (ASC_WIDE_BOARD(boardp)((boardp)->flags & 0x04)) { |
5184 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5185 | iounmapvfree(boardp->ioremap_addr); |
5186 | #endif /* version >= v1,3,0 */ |
5187 | if (boardp->orig_reqp) { |
5188 | kfreelinux_kfree(boardp->orig_reqp); |
5189 | boardp->orig_reqp = boardp->adv_reqp = NULL((void *) 0); |
5190 | } |
5191 | if (boardp->orig_sgblkp) { |
5192 | kfreelinux_kfree(boardp->orig_sgblkp); |
5193 | boardp->orig_sgblkp = boardp->adv_sgblkp = NULL((void *) 0); |
5194 | } |
5195 | } |
5196 | if (shp->dma_channel != NO_ISA_DMA0xff) { |
5197 | free_dma(shp->dma_channel); |
5198 | } |
5199 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5200 | kfreelinux_kfree(boardp->prtbuf); |
5201 | #endif /* version >= v1.3.0 */ |
5202 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,70)(((1) * 65536) + ((3) * 256) + (70)) |
5203 | free_irq(shp->irq); |
5204 | #else /* version >= v1.3.70 */ |
5205 | free_irq(shp->irq, boardp); |
5206 | #endif /* version >= v1.3.70 */ |
5207 | scsi_unregister(shp); |
5208 | asc_board_count--; |
5209 | continue; |
5210 | } |
5211 | ASC_DBG_PRT_SCSI_HOST(2, shp); |
5212 | } |
5213 | } |
5214 | ASC_DBG1(1, "advansys_detect: done: asc_board_count %d\n", asc_board_count); |
5215 | return asc_board_count; |
5216 | } |
5217 | |
5218 | /* |
5219 | * advansys_release() |
5220 | * |
5221 | * Release resources allocated for a single AdvanSys adapter. |
5222 | */ |
5223 | int |
5224 | advansys_release(struct Scsi_Host *shp) |
5225 | { |
5226 | asc_board_t *boardp; |
5227 | |
5228 | ASC_DBG(1, "advansys_release: begin\n"); |
5229 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
5230 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,70)(((1) * 65536) + ((3) * 256) + (70)) |
5231 | free_irq(shp->irq); |
5232 | #else /* version >= v1.3.70 */ |
5233 | free_irq(shp->irq, boardp); |
5234 | #endif /* version >= v1.3.70 */ |
5235 | if (shp->dma_channel != NO_ISA_DMA0xff) { |
5236 | ASC_DBG(1, "advansys_release: free_dma()\n"); |
5237 | free_dma(shp->dma_channel); |
5238 | } |
5239 | release_region(shp->io_port, shp->n_io_port); |
5240 | if (ASC_WIDE_BOARD(boardp)((boardp)->flags & 0x04)) { |
5241 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5242 | iounmapvfree(boardp->ioremap_addr); |
5243 | #endif /* version >= v1,3,0 */ |
5244 | if (boardp->orig_reqp) { |
5245 | kfreelinux_kfree(boardp->orig_reqp); |
5246 | boardp->orig_reqp = boardp->adv_reqp = NULL((void *) 0); |
5247 | } |
5248 | if (boardp->orig_sgblkp) { |
5249 | kfreelinux_kfree(boardp->orig_sgblkp); |
5250 | boardp->orig_sgblkp = boardp->adv_sgblkp = NULL((void *) 0); |
5251 | } |
5252 | } |
5253 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
5254 | ASC_ASSERT(boardp->prtbuf != NULL){ if (!(boardp->prtbuf != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5254); } }; |
5255 | kfreelinux_kfree(boardp->prtbuf); |
5256 | #endif /* version >= v1.3.0 */ |
5257 | scsi_unregister(shp); |
5258 | ASC_DBG(1, "advansys_release: end\n"); |
5259 | return 0; |
5260 | } |
5261 | |
5262 | /* |
5263 | * advansys_info() |
5264 | * |
5265 | * Return suitable for printing on the console with the argument |
5266 | * adapter's configuration information. |
5267 | * |
5268 | * Note: The information line should not exceed ASC_INFO_SIZE bytes, |
5269 | * otherwise the static 'info' array will be overrun. |
5270 | */ |
5271 | const char * |
5272 | advansys_info(struct Scsi_Host *shp) |
5273 | { |
5274 | static char info[ASC_INFO_SIZE128]; |
5275 | asc_board_t *boardp; |
5276 | ASC_DVC_VAR *asc_dvc_varp; |
5277 | ADV_DVC_VAR *adv_dvc_varp; |
5278 | char *busname; |
5279 | |
5280 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
5281 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
5282 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
5283 | ASC_DBG(1, "advansys_info: begin\n"); |
5284 | if (asc_dvc_varp->bus_type & ASC_IS_ISA(0x0001)) { |
5285 | if ((asc_dvc_varp->bus_type & ASC_IS_ISAPNP(0x0081)) == ASC_IS_ISAPNP(0x0081)) { |
5286 | busname = "ISA PnP"; |
5287 | } else { |
5288 | busname = "ISA"; |
5289 | } |
5290 | sprintflinux_sprintf(info, |
5291 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,92)(((2) * 65536) + ((1) * 256) + (92)) |
5292 | "AdvanSys SCSI %s: %s %u CDB: BIOS %X, IO %X/%X, IRQ %u, DMA %u", |
5293 | #else /* version >= v2.1.92 */ |
5294 | "AdvanSys SCSI %s: %s %u CDB: BIOS %X, IO %lX/%X, IRQ %u, DMA %u", |
5295 | #endif /* version >= v2.1.92 */ |
5296 | ASC_VERSION"3.1E", busname, asc_dvc_varp->max_total_qng, |
5297 | (unsigned) shp->base, |
5298 | shp->io_port, shp->n_io_port - 1, |
5299 | shp->irq, shp->dma_channel); |
5300 | } else if (asc_dvc_varp->bus_type & ASC_IS_PCI(0x0004)) { |
5301 | if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA(0x0104)) |
5302 | == ASC_IS_PCI_ULTRA(0x0104)) { |
5303 | busname = "PCI Ultra"; |
5304 | } else { |
5305 | busname = "PCI"; |
5306 | } |
5307 | sprintflinux_sprintf(info, |
5308 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,92)(((2) * 65536) + ((1) * 256) + (92)) |
5309 | "AdvanSys SCSI %s: %s %u CDB: IO %X/%X, IRQ %u", |
5310 | #else /* version >= v2.1.92 */ |
5311 | "AdvanSys SCSI %s: %s %u CDB: IO %lX/%X, IRQ %u", |
5312 | #endif /* version >= v2.1.92 */ |
5313 | ASC_VERSION"3.1E", busname, asc_dvc_varp->max_total_qng, |
5314 | shp->io_port, shp->n_io_port - 1, shp->irq); |
5315 | } else { |
5316 | if (asc_dvc_varp->bus_type & ASC_IS_VL(0x0040)) { |
5317 | busname = "VL"; |
5318 | } else if (asc_dvc_varp->bus_type & ASC_IS_EISA(0x0002)) { |
5319 | busname = "EISA"; |
5320 | } else { |
5321 | busname = "?"; |
5322 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_info: board %d: unknown bus type %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); } |
5323 | "advansys_info: board %d: unknown bus type %d\n",{ printk("advansys: "); printk(("advansys_info: board %d: unknown bus type %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); } |
5324 | boardp->id, asc_dvc_varp->bus_type){ printk("advansys: "); printk(("advansys_info: board %d: unknown bus type %d\n" ), (boardp->id), (asc_dvc_varp->bus_type)); }; |
5325 | } |
5326 | sprintflinux_sprintf(info, |
5327 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,92)(((2) * 65536) + ((1) * 256) + (92)) |
5328 | "AdvanSys SCSI %s: %s %u CDB: BIOS %X, IO %X/%X, IRQ %u", |
5329 | #else /* version >= v2.1.92 */ |
5330 | "AdvanSys SCSI %s: %s %u CDB: BIOS %X, IO %lX/%X, IRQ %u", |
5331 | #endif /* version >= v2.1.92 */ |
5332 | ASC_VERSION"3.1E", busname, asc_dvc_varp->max_total_qng, |
5333 | (unsigned) shp->base, shp->io_port - 1, |
5334 | shp->n_io_port, shp->irq); |
5335 | } |
5336 | } else { |
5337 | /* |
5338 | * Wide Adapter Information |
5339 | * |
5340 | * Memory-mapped I/O is used instead of I/O space to access |
5341 | * the adapter, but display the I/O Port range. The Memory |
5342 | * I/O address is displayed through the driver /proc file. |
5343 | */ |
5344 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
5345 | if (boardp->bios_signature == 0x55AA) { |
5346 | sprintflinux_sprintf(info, |
5347 | "AdvanSys SCSI %s: PCI Ultra-Wide: BIOS %X/%X, IO %X/%X, IRQ %u", |
5348 | ASC_VERSION"3.1E", |
5349 | boardp->bios_codeseg << 4, |
5350 | boardp->bios_codelen > 0 ? |
5351 | (boardp->bios_codelen << 9) - 1 : 0, |
5352 | (unsigned) boardp->ioport, ADV_CONDOR_IOLEN0x40 - 1, |
5353 | shp->irq); |
5354 | } else { |
5355 | sprintflinux_sprintf(info, |
5356 | "AdvanSys SCSI %s: PCI Ultra-Wide: IO %X/%X, IRQ %u", |
5357 | ASC_VERSION"3.1E", |
5358 | (unsigned) boardp->ioport, |
5359 | (ADV_CONDOR_IOLEN0x40 - 1), |
5360 | shp->irq); |
5361 | } |
5362 | } |
5363 | ASC_ASSERT(strlen(info) < ASC_INFO_SIZE){ if (!(strlen(info) < 128)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5363); } }; |
5364 | ASC_DBG(1, "advansys_info: end\n"); |
5365 | return info; |
5366 | } |
5367 | |
5368 | /* |
5369 | * advansys_command() - polled I/O entrypoint. |
5370 | * |
5371 | * Apparently host drivers shouldn't return until the command |
5372 | * is finished. |
5373 | * |
5374 | * Note: This is an old interface that is no longer used by the SCSI |
5375 | * mid-level driver. The new interface, advansys_queuecommand(), |
5376 | * currently handles all requests. |
5377 | */ |
5378 | int |
5379 | advansys_command(Scsi_Cmnd *scp) |
5380 | { |
5381 | ASC_DBG1(1, "advansys_command: scp %x\n", (unsigned) scp); |
5382 | ASC_STATS(scp->host, command)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .command++); |
5383 | scp->SCp.Status = 0; /* Set to a known state */ |
5384 | advansys_queuecommand(scp, advansys_command_done); |
5385 | while (scp->SCp.Status == 0) { |
5386 | continue; |
5387 | } |
5388 | ASC_DBG1(1, "advansys_command: result %x\n", scp->result); |
5389 | return scp->result; |
5390 | } |
5391 | |
5392 | /* |
5393 | * advansys_queuecommand() - interrupt-driven I/O entrypoint. |
5394 | * |
5395 | * This function always returns 0. Command return status is saved |
5396 | * in the 'scp' result field. |
5397 | */ |
5398 | int |
5399 | advansys_queuecommand(Scsi_Cmnd *scp, void (*done)(Scsi_Cmnd *)) |
5400 | { |
5401 | struct Scsi_Host *shp; |
5402 | asc_board_t *boardp; |
5403 | long flags; |
5404 | Scsi_Cmnd *done_scp; |
5405 | |
5406 | shp = scp->host; |
5407 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
5408 | ASC_STATS(shp, queuecommand)(((asc_board_t *) &((shp)->hostdata))->asc_stats.queuecommand ++); |
5409 | |
5410 | /* |
5411 | * Disable interrupts to preserve request ordering and provide |
5412 | * mutually exclusive access to global structures used to initiate |
5413 | * a request. |
5414 | */ |
5415 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
5416 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5417 | |
5418 | /* |
5419 | * Block new commands while handling a reset or abort request. |
5420 | */ |
5421 | if (boardp->flags & (ASC_HOST_IN_RESET0x01 | ASC_HOST_IN_ABORT0x02)) { |
5422 | if (boardp->flags & ASC_HOST_IN_RESET0x01) { |
5423 | ASC_DBG1(1, |
5424 | "advansys_queuecommand: scp %x blocked for reset request\n", |
5425 | (unsigned) scp); |
5426 | scp->result = HOST_BYTE(DID_RESET)((0x08) << 16); |
5427 | } else { |
5428 | ASC_DBG1(1, |
5429 | "advansys_queuecommand: scp %x blocked for abort request\n", |
5430 | (unsigned) scp); |
5431 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16); |
5432 | } |
5433 | |
5434 | /* |
5435 | * Add blocked requests to the board's 'done' queue. The queued |
5436 | * requests will be completed at the end of the abort or reset |
5437 | * handling. |
5438 | */ |
5439 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
5440 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
5441 | return 0; |
5442 | } |
5443 | |
5444 | /* |
5445 | * Attempt to execute any waiting commands for the board. |
5446 | */ |
5447 | if (!ASC_QUEUE_EMPTY(&boardp->waiting)((&boardp->waiting)->q_tidmask == 0)) { |
5448 | ASC_DBG(1, |
5449 | "advansys_queuecommand: before asc_execute_queue() waiting\n"); |
5450 | asc_execute_queue(&boardp->waiting); |
5451 | } |
5452 | |
5453 | /* |
5454 | * Save the function pointer to Linux mid-level 'done' function |
5455 | * and attempt to execute the command. |
5456 | * |
5457 | * If ASC_ERROR is returned the request has been added to the |
5458 | * board's 'active' queue and will be completed by the interrupt |
5459 | * handler. |
5460 | * |
5461 | * If ASC_BUSY is returned add the request to the board's per |
5462 | * target waiting list. |
5463 | * |
5464 | * If an error occurred, the request will have been placed on the |
5465 | * board's 'done' queue and must be completed before returning. |
5466 | */ |
5467 | scp->scsi_done = done; |
5468 | switch (asc_execute_scsi_cmnd(scp)) { |
5469 | case ASC_NOERROR1: |
5470 | break; |
5471 | case ASC_BUSY0: |
5472 | asc_enqueue(&boardp->waiting, scp, ASC_BACK2); |
5473 | break; |
5474 | case ASC_ERROR(-1): |
5475 | default: |
5476 | done_scp = asc_dequeue_list(&boardp->done, NULL((void *) 0), ASC_TID_ALL(-1)); |
5477 | /* Interrupts could be enabled here. */ |
5478 | asc_scsi_done_list(done_scp); |
5479 | break; |
5480 | } |
5481 | |
5482 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
5483 | return 0; |
5484 | } |
5485 | |
5486 | /* |
5487 | * advansys_abort() |
5488 | * |
5489 | * Abort the command specified by 'scp'. |
5490 | */ |
5491 | int |
5492 | advansys_abort(Scsi_Cmnd *scp) |
5493 | { |
5494 | struct Scsi_Host *shp; |
5495 | asc_board_t *boardp; |
5496 | ASC_DVC_VAR *asc_dvc_varp; |
5497 | ADV_DVC_VAR *adv_dvc_varp; |
5498 | long flags; |
5499 | int do_scsi_done; |
5500 | int scp_found; |
5501 | Scsi_Cmnd *done_scp = NULL((void *) 0); |
5502 | int ret; |
5503 | |
5504 | /* Save current flags and disable interrupts. */ |
5505 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
5506 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5507 | |
5508 | ASC_DBG1(1, "advansys_abort: scp %x\n", (unsigned) scp); |
5509 | |
5510 | #ifdef ADVANSYS_STATS |
5511 | if (scp->host != NULL((void *) 0)) { |
5512 | ASC_STATS(scp->host, abort)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .abort++); |
5513 | } |
5514 | #endif /* ADVANSYS_STATS */ |
5515 | |
5516 | #ifdef ADVANSYS_ASSERT |
5517 | do_scsi_done = ASC_ERROR(-1); |
Value stored to 'do_scsi_done' is never read | |
5518 | scp_found = ASC_ERROR(-1); |
5519 | ret = ASC_ERROR(-1); |
5520 | #endif /* ADVANSYS_ASSERT */ |
5521 | |
5522 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5523 | if (scp->serial_number != scp->serial_number_at_timeout) { |
5524 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_abort: timeout serial number changed for request %x\n" ), ((unsigned) scp)); } |
5525 | "advansys_abort: timeout serial number changed for request %x\n",{ printk("advansys: "); printk(("advansys_abort: timeout serial number changed for request %x\n" ), ((unsigned) scp)); } |
5526 | (unsigned) scp){ printk("advansys: "); printk(("advansys_abort: timeout serial number changed for request %x\n" ), ((unsigned) scp)); }; |
5527 | do_scsi_done = ASC_FALSE0; |
5528 | scp_found = ASC_FALSE0; |
5529 | ret = SCSI_ABORT_NOT_RUNNING4; |
5530 | } else |
5531 | #endif /* version >= v1.3.89 */ |
5532 | if ((shp = scp->host) == NULL((void *) 0)) { |
5533 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
5534 | do_scsi_done = ASC_TRUE1; |
5535 | scp_found = ASC_FALSE0; |
5536 | ret = SCSI_ABORT_ERROR5; |
5537 | } else if ((boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)))->flags & |
5538 | (ASC_HOST_IN_RESET0x01 | ASC_HOST_IN_ABORT0x02)) { |
5539 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_abort: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); } |
5540 | "advansys_abort: board %d: Nested host reset or abort, flags 0x%x\n",{ printk("advansys: "); printk(("advansys_abort: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); } |
5541 | boardp->id, boardp->flags){ printk("advansys: "); printk(("advansys_abort: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); }; |
5542 | do_scsi_done = ASC_TRUE1; |
5543 | if ((asc_rmqueue(&boardp->active, scp) == ASC_TRUE1) || |
5544 | (asc_rmqueue(&boardp->waiting, scp) == ASC_TRUE1)) { |
5545 | scp_found = ASC_TRUE1; |
5546 | } else { |
5547 | scp_found = ASC_FALSE0; |
5548 | } |
5549 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
5550 | ret = SCSI_ABORT_ERROR5; |
5551 | } else { |
5552 | /* Set abort flag to avoid nested reset or abort requests. */ |
5553 | boardp->flags |= ASC_HOST_IN_ABORT0x02; |
5554 | |
5555 | do_scsi_done = ASC_TRUE1; |
5556 | if (asc_rmqueue(&boardp->waiting, scp) == ASC_TRUE1) { |
5557 | /* |
5558 | * If asc_rmqueue() found the command on the waiting |
5559 | * queue, it had not been sent to the device. After |
5560 | * the queue is removed, no other handling is required. |
5561 | */ |
5562 | ASC_DBG1(1, "advansys_abort: scp %x found on waiting queue\n", |
5563 | (unsigned) scp); |
5564 | scp_found = ASC_TRUE1; |
5565 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16); |
5566 | ret = SCSI_ABORT_SUCCESS1; |
5567 | } else if (asc_isqueued(&boardp->active, scp) == ASC_TRUE1) { |
5568 | /* |
5569 | * If asc_isqueued() found the command on the active |
5570 | * queue, it has been sent to the device. The command |
5571 | * will be returned through the interrupt handler after |
5572 | * it has been aborted. |
5573 | */ |
5574 | |
5575 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
5576 | /* |
5577 | * Narrow Board |
5578 | */ |
5579 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
5580 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16); |
5581 | |
5582 | sti()__asm__ __volatile__ ("sti": : :"memory"); /* Enable interrupts for AscAbortSRB(). */ |
5583 | ASC_DBG1(1, "advansys_abort: before AscAbortSRB(), scp %x\n", |
5584 | (unsigned) scp); |
5585 | switch (AscAbortSRB(asc_dvc_varp, (ulong) scp)) { |
5586 | case ASC_TRUE1: |
5587 | /* asc_isr_callback() will be called */ |
5588 | ASC_DBG(1, "advansys_abort: AscAbortSRB() TRUE\n"); |
5589 | ret = SCSI_ABORT_PENDING2; |
5590 | break; |
5591 | case ASC_FALSE0: |
5592 | /* Request has apparently already completed. */ |
5593 | ASC_DBG(1, "advansys_abort: AscAbortSRB() FALSE\n"); |
5594 | ret = SCSI_ABORT_NOT_RUNNING4; |
5595 | break; |
5596 | case ASC_ERROR(-1): |
5597 | default: |
5598 | ASC_DBG(1, "advansys_abort: AscAbortSRB() ERROR\n"); |
5599 | ret = SCSI_ABORT_ERROR5; |
5600 | break; |
5601 | } |
5602 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5603 | } else { |
5604 | /* |
5605 | * Wide Board |
5606 | */ |
5607 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
5608 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16); |
5609 | |
5610 | ASC_DBG1(1, "advansys_abort: before AdvAbortSRB(), scp %x\n", |
5611 | (unsigned) scp); |
5612 | switch (AdvAbortSRB(adv_dvc_varp, (ulong) scp)AdvSendIdleCmd((adv_dvc_varp), (ushort) 0x0008, (ulong) ((ulong ) scp), 0)) { |
5613 | case ASC_TRUE1: |
5614 | /* asc_isr_callback() will be called */ |
5615 | ASC_DBG(1, "advansys_abort: AdvAbortSRB() TRUE\n"); |
5616 | ret = SCSI_ABORT_PENDING2; |
5617 | break; |
5618 | case ASC_FALSE0: |
5619 | /* Request has apparently already completed. */ |
5620 | ASC_DBG(1, "advansys_abort: AdvAbortSRB() FALSE\n"); |
5621 | ret = SCSI_ABORT_NOT_RUNNING4; |
5622 | break; |
5623 | case ASC_ERROR(-1): |
5624 | default: |
5625 | ASC_DBG(1, "advansys_abort: AdvAbortSRB() ERROR\n"); |
5626 | ret = SCSI_ABORT_ERROR5; |
5627 | break; |
5628 | } |
5629 | /* |
5630 | * Ensure all requests completed by the microcode have |
5631 | * been processed by calling AdvISR(). |
5632 | */ |
5633 | (void) AdvISR(adv_dvc_varp); |
5634 | } |
5635 | |
5636 | /* |
5637 | * The request will either still be on the active queue |
5638 | * or have been added to the board's done queue. |
5639 | */ |
5640 | if (asc_rmqueue(&boardp->active, scp) == ASC_TRUE1) { |
5641 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16); |
5642 | scp_found = ASC_TRUE1; |
5643 | } else { |
5644 | scp_found = asc_rmqueue(&boardp->done, scp); |
5645 | ASC_ASSERT(scp_found == ASC_TRUE){ if (!(scp_found == 1)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5645); } }; |
5646 | } |
5647 | |
5648 | } else { |
5649 | /* |
5650 | * The command was not found on the active or waiting queues. |
5651 | */ |
5652 | do_scsi_done = ASC_TRUE1; |
5653 | scp_found = ASC_FALSE0; |
5654 | ret = SCSI_ABORT_NOT_RUNNING4; |
5655 | } |
5656 | |
5657 | /* Clear abort flag. */ |
5658 | boardp->flags &= ~ASC_HOST_IN_ABORT0x02; |
5659 | |
5660 | /* |
5661 | * Because the ASC_HOST_IN_ABORT flag causes both |
5662 | * 'advansys_interrupt' and 'asc_isr_callback' to |
5663 | * queue requests to the board's 'done' queue and |
5664 | * prevents waiting commands from being executed, |
5665 | * these queued requests must be handled here. |
5666 | */ |
5667 | done_scp = asc_dequeue_list(&boardp->done, NULL((void *) 0), ASC_TID_ALL(-1)); |
5668 | |
5669 | /* |
5670 | * Start any waiting commands for the board. |
5671 | */ |
5672 | if (!ASC_QUEUE_EMPTY(&boardp->waiting)((&boardp->waiting)->q_tidmask == 0)) { |
5673 | ASC_DBG(1, "advansys_interrupt: before asc_execute_queue()\n"); |
5674 | asc_execute_queue(&boardp->waiting); |
5675 | } |
5676 | } |
5677 | |
5678 | /* Interrupts could be enabled here. */ |
5679 | |
5680 | /* |
5681 | * Complete the request to be aborted, unless it has been |
5682 | * restarted as detected above, even if it was not found on |
5683 | * the device active or waiting queues. |
5684 | */ |
5685 | ASC_ASSERT(do_scsi_done != ASC_ERROR){ if (!(do_scsi_done != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5685); } }; |
5686 | ASC_ASSERT(scp_found != ASC_ERROR){ if (!(scp_found != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5686); } }; |
5687 | if (do_scsi_done == ASC_TRUE1) { |
5688 | if (scp->scsi_done == NULL((void *) 0)) { |
5689 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_abort: aborted request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); } |
5690 | "advansys_abort: aborted request scsi_done() is NULL, %x\n",{ printk("advansys: "); printk(("advansys_abort: aborted request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); } |
5691 | (unsigned) scp){ printk("advansys: "); printk(("advansys_abort: aborted request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); }; |
5692 | } else { |
5693 | if (scp_found == ASC_FALSE0) { |
5694 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_abort: abort request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); } |
5695 | "advansys_abort: abort request not active or waiting, completing anyway %x\n",{ printk("advansys: "); printk(("advansys_abort: abort request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); } |
5696 | (unsigned) scp){ printk("advansys: "); printk(("advansys_abort: abort request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); }; |
5697 | } |
5698 | ASC_STATS(scp->host, done)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .done++); |
5699 | scp->scsi_done(scp); |
5700 | } |
5701 | } |
5702 | |
5703 | /* |
5704 | * It is possible for the request done function to re-enable |
5705 | * interrupts without confusing the driver. But here interrupts |
5706 | * aren't enabled until all requests have been completed. |
5707 | */ |
5708 | if (done_scp != NULL((void *) 0)) { |
5709 | asc_scsi_done_list(done_scp); |
5710 | } |
5711 | |
5712 | ASC_DBG1(1, "advansys_abort: ret %d\n", ret); |
5713 | |
5714 | /* Re-enable interrupts, if they were enabled on entry. */ |
5715 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
5716 | |
5717 | ASC_ASSERT(ret != ASC_ERROR){ if (!(ret != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 5717); } }; |
5718 | return ret; |
5719 | } |
5720 | |
5721 | /* |
5722 | * advansys_reset() |
5723 | * |
5724 | * Reset the device associated with the command 'scp'. |
5725 | */ |
5726 | int |
5727 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5728 | advansys_reset(Scsi_Cmnd *scp) |
5729 | #else /* version >= v1.3.89 */ |
5730 | advansys_reset(Scsi_Cmnd *scp, unsigned int reset_flags) |
5731 | #endif /* version >= v1.3.89 */ |
5732 | { |
5733 | struct Scsi_Host *shp; |
5734 | asc_board_t *boardp; |
5735 | ASC_DVC_VAR *asc_dvc_varp; |
5736 | ADV_DVC_VAR *adv_dvc_varp; |
5737 | long flags; |
5738 | Scsi_Cmnd *done_scp = NULL((void *) 0), *last_scp = NULL((void *) 0); |
5739 | Scsi_Cmnd *tscp, *new_last_scp; |
5740 | int do_scsi_done; |
5741 | int scp_found; |
5742 | int status; |
5743 | int target; |
5744 | int ret; |
5745 | int device_reset = ASC_FALSE0; |
5746 | |
5747 | /* Save current flags and disable interrupts. */ |
5748 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
5749 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5750 | |
5751 | ASC_DBG1(1, "advansys_reset: %x\n", (unsigned) scp); |
5752 | |
5753 | #ifdef ADVANSYS_STATS |
5754 | if (scp->host != NULL((void *) 0)) { |
5755 | ASC_STATS(scp->host, reset)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .reset++); |
5756 | } |
5757 | #endif /* ADVANSYS_STATS */ |
5758 | |
5759 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5760 | if ((reset_flags & SCSI_RESET_ASYNCHRONOUS0x02) && |
5761 | (scp->serial_number != scp->serial_number_at_timeout)) { |
5762 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_reset: timeout serial number changed for request %x\n" ), ((unsigned) scp)); } |
5763 | "advansys_reset: timeout serial number changed for request %x\n",{ printk("advansys: "); printk(("advansys_reset: timeout serial number changed for request %x\n" ), ((unsigned) scp)); } |
5764 | (unsigned) scp){ printk("advansys: "); printk(("advansys_reset: timeout serial number changed for request %x\n" ), ((unsigned) scp)); }; |
5765 | do_scsi_done = ASC_FALSE0; |
5766 | scp_found = ASC_FALSE0; |
5767 | ret = SCSI_RESET_NOT_RUNNING5; |
5768 | } else |
5769 | #endif /* version >= v1.3.89 */ |
5770 | if ((shp = scp->host) == NULL((void *) 0)) { |
5771 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
5772 | do_scsi_done = ASC_TRUE1; |
5773 | scp_found = ASC_FALSE0; |
5774 | ret = SCSI_RESET_ERROR6; |
5775 | } else if ((boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)))->flags & |
5776 | (ASC_HOST_IN_RESET0x01 | ASC_HOST_IN_ABORT0x02)) { |
5777 | ASC_PRINT2({ printk("advansys: "); printk(("advansys_reset: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); } |
5778 | "advansys_reset: board %d: Nested host reset or abort, flags 0x%x\n",{ printk("advansys: "); printk(("advansys_reset: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); } |
5779 | boardp->id, boardp->flags){ printk("advansys: "); printk(("advansys_reset: board %d: Nested host reset or abort, flags 0x%x\n" ), (boardp->id), (boardp->flags)); }; |
5780 | do_scsi_done = ASC_TRUE1; |
5781 | if ((asc_rmqueue(&boardp->active, scp) == ASC_TRUE1) || |
5782 | (asc_rmqueue(&boardp->waiting, scp) == ASC_TRUE1)) { |
5783 | scp_found = ASC_TRUE1; |
5784 | } else { |
5785 | scp_found = ASC_FALSE0; |
5786 | } |
5787 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
5788 | ret = SCSI_RESET_ERROR6; |
5789 | } else if (jiffies >= boardp->last_reset && |
5790 | jiffies < (boardp->last_reset + (10 * HZ100))) { |
5791 | /* |
5792 | * Don't allow a reset to be attempted within 10 seconds |
5793 | * of the last reset. |
5794 | * |
5795 | * If 'jiffies' wrapping occurs, the reset request will go |
5796 | * through, because a wrapped 'jiffies' would not pass the |
5797 | * test above. |
5798 | */ |
5799 | ASC_DBG(1, |
5800 | "advansys_reset: reset within 10 sec of last reset ignored\n"); |
5801 | do_scsi_done = ASC_TRUE1; |
5802 | if ((asc_rmqueue(&boardp->active, scp) == ASC_TRUE1) || |
5803 | (asc_rmqueue(&boardp->waiting, scp) == ASC_TRUE1)) { |
5804 | scp_found = ASC_TRUE1; |
5805 | } else { |
5806 | scp_found = ASC_FALSE0; |
5807 | } |
5808 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
5809 | ret = SCSI_RESET_ERROR6; |
5810 | } else { |
5811 | do_scsi_done = ASC_TRUE1; |
5812 | |
5813 | /* Set reset flag to avoid nested reset or abort requests. */ |
5814 | boardp->flags |= ASC_HOST_IN_RESET0x01; |
5815 | |
5816 | /* |
5817 | * If the request is on the target waiting or active queue |
5818 | * or the board done queue, then remove it and note that it |
5819 | * was found. |
5820 | */ |
5821 | if (asc_rmqueue(&boardp->active, scp) == ASC_TRUE1) { |
5822 | ASC_DBG(1, "advansys_reset: active scp_found = TRUE\n"); |
5823 | scp_found = ASC_TRUE1; |
5824 | } else if (asc_rmqueue(&boardp->waiting, scp) == ASC_TRUE1) { |
5825 | ASC_DBG(1, "advansys_reset: waiting scp_found = TRUE\n"); |
5826 | scp_found = ASC_TRUE1; |
5827 | } else if (asc_rmqueue(&boardp->done, scp) == ASC_TRUE1) { |
5828 | scp_found = ASC_TRUE1; |
5829 | } else { |
5830 | scp_found = ASC_FALSE0; |
5831 | } |
5832 | |
5833 | |
5834 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
5835 | /* |
5836 | * Narrow Board |
5837 | * |
5838 | * If the suggest reset bus flags are set, then reset the bus. |
5839 | * Otherwise only reset the device. |
5840 | */ |
5841 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
5842 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5843 | if (reset_flags & |
5844 | (SCSI_RESET_SUGGEST_BUS_RESET0x04 | |
5845 | SCSI_RESET_SUGGEST_HOST_RESET0x08)) { |
5846 | #endif /* version >= v1.3.89 */ |
5847 | |
5848 | /* |
5849 | * Reset the target's SCSI bus. |
5850 | */ |
5851 | ASC_DBG(1, "advansys_reset: before AscResetSB()\n"); |
5852 | sti()__asm__ __volatile__ ("sti": : :"memory"); /* Enable interrupts for AscResetSB(). */ |
5853 | status = AscResetSB(asc_dvc_varp); |
5854 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5855 | switch (status) { |
5856 | case ASC_TRUE1: |
5857 | ASC_DBG(1, "advansys_reset: AscResetSB() success\n"); |
5858 | ret = SCSI_RESET_SUCCESS2; |
5859 | break; |
5860 | case ASC_ERROR(-1): |
5861 | default: |
5862 | ASC_DBG(1, "advansys_reset: AscResetSB() failed\n"); |
5863 | ret = SCSI_RESET_ERROR6; |
5864 | break; |
5865 | } |
5866 | |
5867 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5868 | } else { |
5869 | /* |
5870 | * Reset the specified device. If the device reset fails, |
5871 | * then reset the SCSI bus. |
5872 | */ |
5873 | |
5874 | ASC_DBG1(1, |
5875 | "advansys_reset: before AscResetDevice(), target %d\n", |
5876 | scp->target); |
5877 | sti()__asm__ __volatile__ ("sti": : :"memory"); /* Enable interrupts for AscResetDevice(). */ |
5878 | status = AscResetDevice(asc_dvc_varp, scp->target); |
5879 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5880 | |
5881 | switch (status) { |
5882 | case ASC_TRUE1: |
5883 | ASC_DBG(1, "advansys_reset: AscResetDevice() success\n"); |
5884 | device_reset = ASC_TRUE1; |
5885 | ret = SCSI_RESET_SUCCESS2; |
5886 | break; |
5887 | case ASC_ERROR(-1): |
5888 | default: |
5889 | ASC_DBG(1, |
5890 | "advansys_reset: AscResetDevice() failed; Calling AscResetSB()\n"); |
5891 | sti()__asm__ __volatile__ ("sti": : :"memory"); /* Enable interrupts for AscResetSB(). */ |
5892 | status = AscResetSB(asc_dvc_varp); |
5893 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
5894 | switch (status) { |
5895 | case ASC_TRUE1: |
5896 | ASC_DBG(1, "advansys_reset: AscResetSB() TRUE\n"); |
5897 | ret = SCSI_RESET_SUCCESS2; |
5898 | break; |
5899 | case ASC_ERROR(-1): |
5900 | default: |
5901 | ASC_DBG(1, "advansys_reset: AscResetSB() ERROR\n"); |
5902 | ret = SCSI_RESET_ERROR6; |
5903 | break; |
5904 | } |
5905 | break; |
5906 | } |
5907 | } |
5908 | #endif /* version >= v1.3.89 */ |
5909 | } else { |
5910 | /* |
5911 | * Wide Board |
5912 | * |
5913 | * If the suggest reset bus flags are set, then reset the bus. |
5914 | * Otherwise only reset the device. |
5915 | */ |
5916 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
5917 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5918 | if (reset_flags & |
5919 | (SCSI_RESET_SUGGEST_BUS_RESET0x04 | |
5920 | SCSI_RESET_SUGGEST_HOST_RESET0x08)) { |
5921 | #endif /* version >= v1.3.89 */ |
5922 | |
5923 | /* |
5924 | * Reset the target's SCSI bus. |
5925 | */ |
5926 | ASC_DBG(1, "advansys_reset: before AdvResetSB()\n"); |
5927 | switch (AdvResetSB(adv_dvc_varp)) { |
5928 | case ASC_TRUE1: |
5929 | ASC_DBG(1, "advansys_reset: AdvResetSB() success\n"); |
5930 | ret = SCSI_RESET_SUCCESS2; |
5931 | break; |
5932 | case ASC_FALSE0: |
5933 | default: |
5934 | ASC_DBG(1, "advansys_reset: AdvResetSB() failed\n"); |
5935 | ret = SCSI_RESET_ERROR6; |
5936 | break; |
5937 | } |
5938 | /* |
5939 | * Ensure all requests completed by the microcode have |
5940 | * been processed by calling AdvISR(). |
5941 | */ |
5942 | (void) AdvISR(adv_dvc_varp); |
5943 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
5944 | } else { |
5945 | /* |
5946 | * Reset the specified device. If the device reset fails, |
5947 | * then reset the SCSI bus. |
5948 | */ |
5949 | |
5950 | ASC_DBG1(1, |
5951 | "advansys_reset: before AdvResetDevice(), target %d\n", |
5952 | scp->target); |
5953 | |
5954 | switch (AdvResetDevice(adv_dvc_varp, scp->target)AdvSendIdleCmd((adv_dvc_varp), (ushort) 0x0010, (ulong) (scp-> target), 0)) { |
5955 | case ASC_TRUE1: |
5956 | ASC_DBG(1, "advansys_reset: AdvResetDevice() success\n"); |
5957 | device_reset = ASC_TRUE1; |
5958 | ret = SCSI_RESET_SUCCESS2; |
5959 | break; |
5960 | case ASC_FALSE0: |
5961 | default: |
5962 | ASC_DBG(1, |
5963 | "advansys_reset: AdvResetDevice() failed; Calling AdvResetSB()\n"); |
5964 | |
5965 | switch (AdvResetSB(adv_dvc_varp)) { |
5966 | case ASC_TRUE1: |
5967 | ASC_DBG(1, "advansys_reset: AdvResetSB() TRUE\n"); |
5968 | ret = SCSI_RESET_SUCCESS2; |
5969 | break; |
5970 | case ASC_FALSE0: |
5971 | default: |
5972 | ASC_DBG(1, "advansys_reset: AdvResetSB() ERROR\n"); |
5973 | ret = SCSI_RESET_ERROR6; |
5974 | break; |
5975 | } |
5976 | break; |
5977 | } |
5978 | /* |
5979 | * Ensure all requests completed by the microcode have |
5980 | * been processed by calling AdvISR(). |
5981 | */ |
5982 | (void) AdvISR(adv_dvc_varp); |
5983 | } |
5984 | #endif /* version >= v1.3.89 */ |
5985 | } |
5986 | |
5987 | /* |
5988 | * Because the ASC_HOST_IN_RESET flag causes both |
5989 | * 'advansys_interrupt' and 'asc_isr_callback' to |
5990 | * queue requests to the board's 'done' queue and |
5991 | * prevents waiting commands from being executed, |
5992 | * these queued requests must be handled here. |
5993 | */ |
5994 | done_scp = asc_dequeue_list(&boardp->done, &last_scp, |
5995 | ASC_TID_ALL(-1)); |
5996 | |
5997 | /* |
5998 | * If a device reset was performed dequeue all waiting |
5999 | * and active requests for the device and set the request |
6000 | * status to DID_RESET. |
6001 | * |
6002 | * If a SCSI bus reset was performed dequeue all waiting |
6003 | * and active requests for all devices and set the request |
6004 | * status to DID_RESET. |
6005 | */ |
6006 | if (device_reset == ASC_TRUE1) { |
6007 | target = scp->target; |
6008 | } else { |
6009 | target = ASC_TID_ALL(-1); |
6010 | } |
6011 | |
6012 | /* |
6013 | * Add active requests to 'done_scp' and set the request status |
6014 | * to DID_RESET. |
6015 | */ |
6016 | if (done_scp == NULL((void *) 0)) { |
6017 | done_scp = asc_dequeue_list(&boardp->active, &last_scp, target); |
6018 | for (tscp = done_scp; tscp; tscp = (REQP) REQPNEXT(tscp)((tscp)->host_scribble)) { |
6019 | tscp->result = HOST_BYTE(DID_RESET)((0x08) << 16); |
6020 | } |
6021 | } else { |
6022 | ASC_ASSERT(last_scp != NULL){ if (!(last_scp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6022); } }; |
6023 | REQPNEXT(last_scp)((last_scp)->host_scribble) = |
6024 | (unsigned char *) asc_dequeue_list(&boardp->active, |
6025 | &new_last_scp, target); |
6026 | if (new_last_scp != (Scsi_Cmnd *) NULL((void *) 0)) { |
6027 | ASC_ASSERT((REQP) REQPNEXT(last_scp) != NULL){ if (!((REQP) ((last_scp)->host_scribble) != ((void *) 0) )) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 6027); } }; |
6028 | for (tscp = (Scsi_Cmnd *) REQPNEXT(last_scp)((last_scp)->host_scribble); |
6029 | tscp; |
6030 | tscp = (Scsi_Cmnd *) REQPNEXT(tscp)((tscp)->host_scribble)) { |
6031 | tscp->result = HOST_BYTE(DID_RESET)((0x08) << 16); |
6032 | } |
6033 | last_scp = new_last_scp; |
6034 | } |
6035 | } |
6036 | |
6037 | /* |
6038 | * Add waiting requests to 'done_scp' and set the request status |
6039 | * to DID_RESET. |
6040 | */ |
6041 | if (done_scp == NULL((void *) 0)) { |
6042 | done_scp = asc_dequeue_list(&boardp->waiting, &last_scp, target); |
6043 | for (tscp = done_scp; tscp; tscp = (REQP) REQPNEXT(tscp)((tscp)->host_scribble)) { |
6044 | tscp->result = HOST_BYTE(DID_RESET)((0x08) << 16); |
6045 | } |
6046 | } else { |
6047 | ASC_ASSERT(last_scp != NULL){ if (!(last_scp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6047); } }; |
6048 | REQPNEXT(last_scp)((last_scp)->host_scribble) = |
6049 | (unsigned char *) asc_dequeue_list(&boardp->waiting, |
6050 | &new_last_scp, target); |
6051 | if (new_last_scp != NULL((void *) 0)) { |
6052 | ASC_ASSERT((REQP) REQPNEXT(last_scp) != NULL){ if (!((REQP) ((last_scp)->host_scribble) != ((void *) 0) )) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 6052); } }; |
6053 | for (tscp = (REQP) REQPNEXT(last_scp)((last_scp)->host_scribble); |
6054 | tscp; |
6055 | tscp = (REQP) REQPNEXT(tscp)((tscp)->host_scribble)) { |
6056 | tscp->result = HOST_BYTE(DID_RESET)((0x08) << 16); |
6057 | } |
6058 | last_scp = new_last_scp; |
6059 | } |
6060 | } |
6061 | |
6062 | /* Save the time of the most recently completed reset. */ |
6063 | boardp->last_reset = jiffies; |
6064 | |
6065 | /* Clear reset flag. */ |
6066 | boardp->flags &= ~ASC_HOST_IN_RESET0x01; |
6067 | |
6068 | /* |
6069 | * Start any waiting commands for the board. |
6070 | */ |
6071 | if (!ASC_QUEUE_EMPTY(&boardp->waiting)((&boardp->waiting)->q_tidmask == 0)) { |
6072 | ASC_DBG(1, "advansys_interrupt: before asc_execute_queue()\n"); |
6073 | asc_execute_queue(&boardp->waiting); |
6074 | } |
6075 | ret = SCSI_RESET_SUCCESS2; |
6076 | } |
6077 | |
6078 | /* Interrupts could be enabled here. */ |
6079 | |
6080 | ASC_ASSERT(do_scsi_done != ASC_ERROR){ if (!(do_scsi_done != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6080); } }; |
6081 | ASC_ASSERT(scp_found != ASC_ERROR){ if (!(scp_found != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6081); } }; |
6082 | if (do_scsi_done == ASC_TRUE1) { |
6083 | if (scp->scsi_done == NULL((void *) 0)) { |
6084 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_reset: reset request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); } |
6085 | "advansys_reset: reset request scsi_done() is NULL, %x\n",{ printk("advansys: "); printk(("advansys_reset: reset request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); } |
6086 | (unsigned) scp){ printk("advansys: "); printk(("advansys_reset: reset request scsi_done() is NULL, %x\n" ), ((unsigned) scp)); }; |
6087 | } else { |
6088 | if (scp_found == ASC_FALSE0) { |
6089 | ASC_PRINT1({ printk("advansys: "); printk(("advansys_reset: reset request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); } |
6090 | "advansys_reset: reset request not active or waiting, completing anyway %x\n",{ printk("advansys: "); printk(("advansys_reset: reset request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); } |
6091 | (unsigned) scp){ printk("advansys: "); printk(("advansys_reset: reset request not active or waiting, completing anyway %x\n" ), ((unsigned) scp)); }; |
6092 | } |
6093 | ASC_STATS(scp->host, done)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .done++); |
6094 | scp->scsi_done(scp); |
6095 | } |
6096 | } |
6097 | |
6098 | /* |
6099 | * It is possible for the request done function to re-enable |
6100 | * interrupts without confusing the driver. But here interrupts |
6101 | * aren't enabled until requests have been completed. |
6102 | */ |
6103 | if (done_scp != NULL((void *) 0)) { |
6104 | asc_scsi_done_list(done_scp); |
6105 | } |
6106 | |
6107 | ASC_DBG1(1, "advansys_reset: ret %d\n", ret); |
6108 | |
6109 | /* Re-enable interrupts, if they were enabled on entry. */ |
6110 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
6111 | |
6112 | ASC_ASSERT(ret != ASC_ERROR){ if (!(ret != (-1))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6112); } }; |
6113 | return ret; |
6114 | } |
6115 | |
6116 | /* |
6117 | * advansys_biosparam() |
6118 | * |
6119 | * Translate disk drive geometry if the "BIOS greater than 1 GB" |
6120 | * support is enabled for a drive. |
6121 | * |
6122 | * ip (information pointer) is an int array with the following definition: |
6123 | * ip[0]: heads |
6124 | * ip[1]: sectors |
6125 | * ip[2]: cylinders |
6126 | */ |
6127 | int |
6128 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
6129 | advansys_biosparam(Disk *dp, int dep, int ip[]) |
6130 | #else /* version >= v1.3.0 */ |
6131 | advansys_biosparam(Disk *dp, kdev_t dep, int ip[]) |
6132 | #endif /* version >= v1.3.0 */ |
6133 | { |
6134 | asc_board_t *boardp; |
6135 | |
6136 | ASC_DBG(1, "advansys_biosparam: begin\n"); |
6137 | ASC_STATS(dp->device->host, biosparam)(((asc_board_t *) &((dp->device->host)->hostdata ))->asc_stats.biosparam++); |
6138 | boardp = ASC_BOARDP(dp->device->host)((asc_board_t *) &((dp->device->host)->hostdata) ); |
6139 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
6140 | if ((boardp->dvc_var.asc_dvc_var.dvc_cntl & |
6141 | ASC_CNTL_BIOS_GT_1GB(ushort)0x0002) && dp->capacity > 0x200000) { |
6142 | ip[0] = 255; |
6143 | ip[1] = 63; |
6144 | } else { |
6145 | ip[0] = 64; |
6146 | ip[1] = 32; |
6147 | } |
6148 | } else { |
6149 | if ((boardp->dvc_var.adv_dvc_var.bios_ctrl & |
6150 | BIOS_CTRL_EXTENDED_XLAT0x0002) && dp->capacity > 0x200000) { |
6151 | ip[0] = 255; |
6152 | ip[1] = 63; |
6153 | } else { |
6154 | ip[0] = 64; |
6155 | ip[1] = 32; |
6156 | } |
6157 | } |
6158 | ip[2] = dp->capacity / (ip[0] * ip[1]); |
6159 | ASC_DBG(1, "advansys_biosparam: end\n"); |
6160 | return 0; |
6161 | } |
6162 | |
6163 | /* |
6164 | * advansys_setup() |
6165 | * |
6166 | * This function is called from init/main.c at boot time. |
6167 | * It it passed LILO parameters that can be set from the |
6168 | * LILO command line or in /etc/lilo.conf. |
6169 | * |
6170 | * It is used by the AdvanSys driver to either disable I/O |
6171 | * port scanning or to limit scanning to 1 - 4 I/O ports. |
6172 | * Regardless of the option setting EISA and PCI boards |
6173 | * will still be searched for and detected. This option |
6174 | * only affects searching for ISA and VL boards. |
6175 | * |
6176 | * If ADVANSYS_DEBUG is defined the driver debug level may |
6177 | * be set using the 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. |
6178 | * |
6179 | * Examples: |
6180 | * 1. Eliminate I/O port scanning: |
6181 | * boot: linux advansys= |
6182 | * or |
6183 | * boot: linux advansys=0x0 |
6184 | * 2. Limit I/O port scanning to one I/O port: |
6185 | * boot: linux advansys=0x110 |
6186 | * 3. Limit I/O port scanning to four I/O ports: |
6187 | * boot: linux advansys=0x110,0x210,0x230,0x330 |
6188 | * 4. If ADVANSYS_DEBUG, limit I/O port scanning to four I/O ports and |
6189 | * set the driver debug level to 2. |
6190 | * boot: linux advansys=0x110,0x210,0x230,0x330,0xdeb2 |
6191 | * |
6192 | * ints[0] - number of arguments |
6193 | * ints[1] - first argument |
6194 | * ints[2] - second argument |
6195 | * ... |
6196 | */ |
6197 | ASC_INITFUNC(void advansys_setup(char *str, int *ints) |
6198 | voidvoid advansys_setup(char *str, int *ints) |
6199 | advansys_setup(char *str, int *ints)void advansys_setup(char *str, int *ints) |
6200 | )void advansys_setup(char *str, int *ints) |
6201 | { |
6202 | int i; |
6203 | |
6204 | if (asc_iopflag == ASC_TRUE1) { |
6205 | printk("AdvanSys SCSI: 'advansys' LILO option may appear only once\n"); |
6206 | return; |
6207 | } |
6208 | |
6209 | asc_iopflag = ASC_TRUE1; |
6210 | |
6211 | if (ints[0] > ASC_NUM_IOPORT_PROBE4) { |
6212 | #ifdef ADVANSYS_DEBUG |
6213 | if ((ints[0] == ASC_NUM_IOPORT_PROBE4 + 1) && |
6214 | (ints[ASC_NUM_IOPORT_PROBE4 + 1] >> 4 == 0xdeb)) { |
6215 | asc_dbglvl = ints[ASC_NUM_IOPORT_PROBE4 + 1] & 0xf; |
6216 | } else { |
6217 | #endif /* ADVANSYS_DEBUG */ |
6218 | printk("AdvanSys SCSI: only %d I/O ports accepted\n", |
6219 | ASC_NUM_IOPORT_PROBE4); |
6220 | #ifdef ADVANSYS_DEBUG |
6221 | } |
6222 | #endif /* ADVANSYS_DEBUG */ |
6223 | } |
6224 | |
6225 | #ifdef ADVANSYS_DEBUG |
6226 | ASC_DBG1(1, "advansys_setup: ints[0] %d\n", ints[0]); |
6227 | for (i = 1; i < ints[0]; i++) { |
6228 | ASC_DBG2(1, " ints[%d] %x", i, ints[i]); |
6229 | } |
6230 | ASC_DBG(1, "\n"); |
6231 | #endif /* ADVANSYS_DEBUG */ |
6232 | |
6233 | for (i = 1; i <= ints[0] && i <= ASC_NUM_IOPORT_PROBE4; i++) { |
6234 | asc_ioport[i-1] = ints[i]; |
6235 | ASC_DBG2(1, "advansys_setup: asc_ioport[%d] %x\n", |
6236 | i - 1, asc_ioport[i-1]); |
6237 | } |
6238 | } |
6239 | |
6240 | |
6241 | /* |
6242 | * --- Loadable Driver Support |
6243 | */ |
6244 | |
6245 | #ifdef MODULE |
6246 | Scsi_Host_Template driver_template = ADVANSYS{ ((void *) 0), ((void *) 0), &proc_scsi_advansys, advansys_proc_info , "advansys", advansys_detect, advansys_release, advansys_info , advansys_command, advansys_queuecommand, advansys_abort, advansys_reset , ((void *) 0), advansys_biosparam, 0, 0, 0, 0, 0, 1, 1, }; |
6247 | # include "scsi_module.c" |
6248 | #endif /* MODULE */ |
6249 | |
6250 | |
6251 | /* |
6252 | * --- Miscellaneous Driver Functions |
6253 | */ |
6254 | |
6255 | /* |
6256 | * First-level interrupt handler. |
6257 | * |
6258 | * For versions > v1.3.70, 'dev_id' is a pointer to the interrupting |
6259 | * adapter's asc_board_t. Because all boards are currently checked |
6260 | * for interrupts on each interrupt, 'dev_id' is not referenced. 'dev_id' |
6261 | * could be used to identify an interrupt passed to the AdvanSys driver, |
6262 | * which is for a device sharing an interrupt with an AdvanSys adapter. |
6263 | */ |
6264 | STATICstatic void |
6265 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,70)(((1) * 65536) + ((3) * 256) + (70)) |
6266 | advansys_interrupt(int irq, struct pt_regs *regs) |
6267 | #else /* version >= v1.3.70 */ |
6268 | advansys_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
6269 | #endif /* version >= v1.3.70 */ |
6270 | { |
6271 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,95)(((2) * 65536) + ((1) * 256) + (95)) |
6272 | long flags; |
6273 | #else /* version >= v2.1.95 */ |
6274 | unsigned long flags; |
6275 | #endif /* version >= v2.1.95 */ |
6276 | int i; |
6277 | asc_board_t *boardp; |
6278 | Scsi_Cmnd *done_scp = NULL((void *) 0), *last_scp = NULL((void *) 0); |
6279 | Scsi_Cmnd *new_last_scp; |
6280 | |
6281 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,95)(((2) * 65536) + ((1) * 256) + (95)) |
6282 | /* Disable interrupts, if they aren't already disabled. */ |
6283 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
6284 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
6285 | #else /* version >= v2.1.95 */ |
6286 | /* |
6287 | * Disable interrupts, if they aren't already disabled and acquire |
6288 | * the I/O spinlock. |
6289 | */ |
6290 | spin_lock_irqsave(&io_request_lock, flags); |
6291 | #endif /* version >= v2.1.95 */ |
6292 | |
6293 | ASC_DBG(1, "advansys_interrupt: begin\n"); |
6294 | |
6295 | /* |
6296 | * Check for interrupts on all boards. |
6297 | * AscISR() will call asc_isr_callback(). |
6298 | */ |
6299 | for (i = 0; i < asc_board_count; i++) { |
6300 | boardp = ASC_BOARDP(asc_host[i])((asc_board_t *) &((asc_host[i])->hostdata)); |
6301 | ASC_DBG2(2, "advansys_interrupt: i %d, boardp %lx\n", |
6302 | i, (ulong) boardp) |
6303 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
6304 | /* |
6305 | * Narrow Board |
6306 | */ |
6307 | if (AscIsIntPending(asc_host[i]->io_port)((unsigned short)((__builtin_constant_p(((asc_host[i]->io_port )+(0x0E))) && ((asc_host[i]->io_port)+(0x0E)) < 256) ? __inwc((asc_host[i]->io_port)+(0x0E)) : __inw((asc_host [i]->io_port)+(0x0E))) & ((unsigned short)0x0001 | (unsigned short)0x0002))) { |
6308 | ASC_STATS(asc_host[i], interrupt)(((asc_board_t *) &((asc_host[i])->hostdata))->asc_stats .interrupt++); |
6309 | ASC_DBG(1, "advansys_interrupt: before AscISR()\n"); |
6310 | AscISR(&boardp->dvc_var.asc_dvc_var); |
6311 | } |
6312 | } else { |
6313 | /* |
6314 | * Wide Board |
6315 | */ |
6316 | ASC_DBG(1, "advansys_interrupt: before AdvISR()\n"); |
6317 | if (AdvISR(&boardp->dvc_var.adv_dvc_var)) { |
6318 | ASC_STATS(asc_host[i], interrupt)(((asc_board_t *) &((asc_host[i])->hostdata))->asc_stats .interrupt++); |
6319 | } |
6320 | } |
6321 | |
6322 | /* |
6323 | * Start waiting requests and create a list of completed requests. |
6324 | * |
6325 | * If a reset or abort request is being performed for the board, |
6326 | * the reset or abort handler will complete pending requests after |
6327 | * it has completed. |
6328 | */ |
6329 | if ((boardp->flags & (ASC_HOST_IN_RESET0x01 | ASC_HOST_IN_ABORT0x02)) == 0) { |
6330 | ASC_DBG2(1, "advansys_interrupt: done_scp %lx, last_scp %lx\n", |
6331 | (ulong) done_scp, (ulong) last_scp); |
6332 | |
6333 | /* Start any waiting commands for the board. */ |
6334 | if (!ASC_QUEUE_EMPTY(&boardp->waiting)((&boardp->waiting)->q_tidmask == 0)) { |
6335 | ASC_DBG(1, "advansys_interrupt: before asc_execute_queue()\n"); |
6336 | asc_execute_queue(&boardp->waiting); |
6337 | } |
6338 | |
6339 | /* |
6340 | * Add to the list of requests that must be completed. |
6341 | * |
6342 | * 'done_scp' will always be NULL on the first iteration |
6343 | * of this loop. 'last_scp' is set at the same time as |
6344 | * 'done_scp'. |
6345 | */ |
6346 | if (done_scp == NULL((void *) 0)) { |
6347 | done_scp = asc_dequeue_list(&boardp->done, &last_scp, |
6348 | ASC_TID_ALL(-1)); |
6349 | } else { |
6350 | ASC_ASSERT(last_scp != NULL){ if (!(last_scp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6350); } }; |
6351 | REQPNEXT(last_scp)((last_scp)->host_scribble) = |
6352 | (unsigned char *) asc_dequeue_list(&boardp->done, |
6353 | &new_last_scp, |
6354 | ASC_TID_ALL(-1)); |
6355 | if (new_last_scp != NULL((void *) 0)) { |
6356 | ASC_ASSERT(REQPNEXT(last_scp) != NULL){ if (!(((last_scp)->host_scribble) != ((void *) 0))) { printk ("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 6356); } }; |
6357 | last_scp = new_last_scp; |
6358 | } |
6359 | } |
6360 | } |
6361 | } |
6362 | |
6363 | /* Interrupts could be enabled here. */ |
6364 | |
6365 | /* |
6366 | * It is possible for the request done function to re-enable |
6367 | * interrupts without confusing the driver. But here the |
6368 | * original flags aren't restored until all requests have been |
6369 | * completed. |
6370 | */ |
6371 | asc_scsi_done_list(done_scp); |
6372 | |
6373 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,95)(((2) * 65536) + ((1) * 256) + (95)) |
6374 | /* |
6375 | * Restore the original flags which will enable interrupts |
6376 | * if and only if they were enabled on entry. |
6377 | */ |
6378 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
6379 | #else /* version >= v2.1.95 */ |
6380 | /* |
6381 | * Release the I/O spinlock and restore the original flags |
6382 | * which will enable interrupts if and only if they were |
6383 | * enabled on entry. |
6384 | */ |
6385 | spin_unlock_irqrestore(&io_request_lock, flags); |
6386 | #endif /* version >= v2.1.95 */ |
6387 | |
6388 | ASC_DBG(1, "advansys_interrupt: end\n"); |
6389 | return; |
6390 | } |
6391 | |
6392 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
6393 | /* |
6394 | * Set the number of commands to queue per device for the |
6395 | * specified host adapter. |
6396 | */ |
6397 | STATICstatic void |
6398 | advansys_select_queue_depths(struct Scsi_Host *shp, Scsi_Device *devicelist) |
6399 | { |
6400 | Scsi_Device *device; |
6401 | asc_board_t *boardp; |
6402 | |
6403 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
6404 | boardp->flags |= ASC_SELECT_QUEUE_DEPTHS0x08; |
6405 | for (device = devicelist; device != NULL((void *) 0); device = device->next) { |
6406 | if (device->host != shp) { |
6407 | continue; |
6408 | } |
6409 | /* |
6410 | * Save a pointer to the device and set its initial/maximum |
6411 | * queue depth. |
6412 | */ |
6413 | boardp->device[device->id] = device; |
6414 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
6415 | device->queue_depth = |
6416 | boardp->dvc_var.asc_dvc_var.max_dvc_qng[device->id]; |
6417 | } else { |
6418 | device->queue_depth = |
6419 | boardp->dvc_var.adv_dvc_var.max_dvc_qng; |
6420 | } |
6421 | ASC_DBG3(1, "advansys_select_queue_depths: shp %x, id %d, depth %d\n", |
6422 | (unsigned) shp, device->id, device->queue_depth); |
6423 | } |
6424 | } |
6425 | #endif /* version >= v1.3.89 */ |
6426 | |
6427 | /* |
6428 | * Function used only with polled I/O requests that are initiated by |
6429 | * advansys_command(). |
6430 | */ |
6431 | STATICstatic void |
6432 | advansys_command_done(Scsi_Cmnd *scp) |
6433 | { |
6434 | ASC_DBG1(1, "advansys_command_done: scp %x\n", (unsigned) scp); |
6435 | scp->SCp.Status = 1; |
6436 | } |
6437 | |
6438 | /* |
6439 | * Complete all requests on the singly linked list pointed |
6440 | * to by 'scp'. |
6441 | * |
6442 | * Interrupts can be enabled on entry. |
6443 | */ |
6444 | STATICstatic void |
6445 | asc_scsi_done_list(Scsi_Cmnd *scp) |
6446 | { |
6447 | Scsi_Cmnd *tscp; |
6448 | |
6449 | ASC_DBG(2, "asc_scsi_done_list: begin\n"); |
6450 | while (scp != NULL((void *) 0)) { |
6451 | ASC_DBG1(3, "asc_scsi_done_list: scp %x\n", (unsigned) scp); |
6452 | tscp = (REQP) REQPNEXT(scp)((scp)->host_scribble); |
6453 | REQPNEXT(scp)((scp)->host_scribble) = NULL((void *) 0); |
6454 | ASC_STATS(scp->host, done)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .done++); |
6455 | ASC_ASSERT(scp->scsi_done != NULL){ if (!(scp->scsi_done != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6455); } }; |
6456 | scp->scsi_done(scp); |
6457 | scp = tscp; |
6458 | } |
6459 | ASC_DBG(2, "asc_scsi_done_list: done\n"); |
6460 | return; |
6461 | } |
6462 | |
6463 | /* |
6464 | * Execute a single 'Scsi_Cmnd'. |
6465 | * |
6466 | * The function 'done' is called when the request has been completed. |
6467 | * |
6468 | * Scsi_Cmnd: |
6469 | * |
6470 | * host - board controlling device |
6471 | * device - device to send command |
6472 | * target - target of device |
6473 | * lun - lun of device |
6474 | * cmd_len - length of SCSI CDB |
6475 | * cmnd - buffer for SCSI 8, 10, or 12 byte CDB |
6476 | * use_sg - if non-zero indicates scatter-gather request with use_sg elements |
6477 | * |
6478 | * if (use_sg == 0) { |
6479 | * request_buffer - buffer address for request |
6480 | * request_bufflen - length of request buffer |
6481 | * } else { |
6482 | * request_buffer - pointer to scatterlist structure |
6483 | * } |
6484 | * |
6485 | * sense_buffer - sense command buffer |
6486 | * |
6487 | * result (4 bytes of an int): |
6488 | * Byte Meaning |
6489 | * 0 SCSI Status Byte Code |
6490 | * 1 SCSI One Byte Message Code |
6491 | * 2 Host Error Code |
6492 | * 3 Mid-Level Error Code |
6493 | * |
6494 | * host driver fields: |
6495 | * SCp - Scsi_Pointer used for command processing status |
6496 | * scsi_done - used to save caller's done function |
6497 | * host_scribble - used for pointer to another Scsi_Cmnd |
6498 | * |
6499 | * If this function returns ASC_NOERROR or ASC_ERROR the request |
6500 | * has been enqueued on the board's 'done' queue and must be |
6501 | * completed by the caller. |
6502 | * |
6503 | * If ASC_BUSY is returned the request must be enqueued by the |
6504 | * caller and re-tried later. |
6505 | */ |
6506 | STATICstatic int |
6507 | asc_execute_scsi_cmnd(Scsi_Cmnd *scp) |
6508 | { |
6509 | asc_board_t *boardp; |
6510 | ASC_DVC_VAR *asc_dvc_varp; |
6511 | ADV_DVC_VAR *adv_dvc_varp; |
6512 | ADV_SCSI_REQ_Q *adv_scsiqp; |
6513 | Scsi_Device *device; |
6514 | int ret; |
6515 | |
6516 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6516); } }; |
6517 | ASC_DBG2(1, "asc_execute_scsi_cmnd: scp %x, done %x\n", |
6518 | (unsigned) scp, (unsigned) scp->scsi_done); |
6519 | |
6520 | boardp = ASC_BOARDP(scp->host)((asc_board_t *) &((scp->host)->hostdata)); |
6521 | device = boardp->device[scp->target]; |
6522 | |
6523 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
6524 | /* |
6525 | * Build and execute Narrow Board request. |
6526 | */ |
6527 | |
6528 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
6529 | |
6530 | /* |
6531 | * Build Asc Library request structure using the |
6532 | * global structures 'asc_scsi_req' and 'asc_sg_head'. |
6533 | * |
6534 | * asc_build_req() can not return ASC_BUSY. |
6535 | */ |
6536 | if (asc_build_req(boardp, scp) == ASC_ERROR(-1)) { |
6537 | ASC_STATS(scp->host, build_error)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .build_error++); |
6538 | return ASC_ERROR(-1); |
6539 | } |
6540 | |
6541 | /* |
6542 | * Execute the command. If there is no error, add the command |
6543 | * to the active queue. |
6544 | */ |
6545 | switch (ret = AscExeScsiQueue(asc_dvc_varp, &asc_scsi_q)) { |
6546 | case ASC_NOERROR1: |
6547 | ASC_STATS(scp->host, exe_noerror)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_noerror++); |
6548 | /* |
6549 | * Increment monotonically increasing per device successful |
6550 | * request counter. Wrapping doesn't matter. |
6551 | */ |
6552 | boardp->reqcnt[scp->target]++; |
6553 | |
6554 | #if ASC_QUEUE_FLOW_CONTROL |
6555 | /* |
6556 | * Conditionally increment the device queue depth. |
6557 | * |
6558 | * If no error occurred and there have been 100 consecutive |
6559 | * successful requests and the current queue depth is less |
6560 | * than the maximum queue depth, then increment the current |
6561 | * queue depth. |
6562 | */ |
6563 | if (boardp->nerrcnt[scp->target]++ > 100) { |
6564 | boardp->nerrcnt[scp->target] = 0; |
6565 | if (device != NULL((void *) 0) && |
6566 | (device->queue_curr_depth < device->queue_depth) && |
6567 | (!(boardp->queue_full & |
6568 | ADV_TID_TO_TIDMASK(scp->target)(0x01 << ((scp->target) & 15))) || |
6569 | (boardp->queue_full_cnt[scp->target] > |
6570 | device->queue_curr_depth))) { |
6571 | device->queue_curr_depth++; |
6572 | } |
6573 | } |
6574 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
6575 | asc_enqueue(&boardp->active, scp, ASC_BACK2); |
6576 | ASC_DBG(1, |
6577 | "asc_execute_scsi_cmnd: AscExeScsiQueue(), ASC_NOERROR\n"); |
6578 | break; |
6579 | case ASC_BUSY0: |
6580 | /* Caller must enqueue request and retry later. */ |
6581 | ASC_STATS(scp->host, exe_busy)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_busy++); |
6582 | #if ASC_QUEUE_FLOW_CONTROL |
6583 | /* |
6584 | * Clear consecutive no error counter and if possible decrement |
6585 | * queue depth. |
6586 | */ |
6587 | boardp->nerrcnt[scp->target] = 0; |
6588 | if (device != NULL((void *) 0) && device->queue_curr_depth > 1) { |
6589 | device->queue_curr_depth--; |
6590 | } |
6591 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
6592 | break; |
6593 | case ASC_ERROR(-1): |
6594 | ASC_PRINT2({ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); } |
6595 | "asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() ASC_ERROR, err_code %x\n",{ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); } |
6596 | boardp->id, asc_dvc_varp->err_code){ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); }; |
6597 | ASC_STATS(scp->host, exe_error)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_error++); |
6598 | #if ASC_QUEUE_FLOW_CONTROL |
6599 | /* Clear consecutive no error counter. */ |
6600 | boardp->nerrcnt[scp->target] = 0; |
6601 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
6602 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6603 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6604 | break; |
6605 | default: |
6606 | ASC_PRINT2({ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); } |
6607 | "asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() unknown, err_code %x\n",{ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); } |
6608 | boardp->id, asc_dvc_varp->err_code){ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (asc_dvc_varp->err_code)); }; |
6609 | ASC_STATS(scp->host, exe_unknown)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_unknown++); |
6610 | #if ASC_QUEUE_FLOW_CONTROL |
6611 | /* Clear consecutive no error counter. */ |
6612 | boardp->nerrcnt[scp->target] = 0; |
6613 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
6614 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6615 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6616 | break; |
6617 | } |
6618 | } else { |
6619 | /* |
6620 | * Build and execute Wide Board request. |
6621 | */ |
6622 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
6623 | |
6624 | /* |
6625 | * Build and get a pointer to an Adv Library request structure. |
6626 | * |
6627 | * If the request is successfully built then send it below, |
6628 | * otherwise return with an error. |
6629 | */ |
6630 | switch (adv_build_req(boardp, scp, &adv_scsiqp)) { |
6631 | case ASC_NOERROR1: |
6632 | ASC_DBG(3, "asc_execute_scsi_cmnd: adv_build_req ASC_NOERROR\n"); |
6633 | break; |
6634 | case ASC_BUSY0: |
6635 | ASC_DBG(1, "asc_execute_scsi_cmnd: adv_build_req ASC_BUSY\n"); |
6636 | return ASC_BUSY0; |
6637 | case ASC_ERROR(-1): |
6638 | default: |
6639 | ASC_DBG(1, "asc_execute_scsi_cmnd: adv_build_req ASC_ERROR\n"); |
6640 | ASC_STATS(scp->host, build_error)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .build_error++); |
6641 | return ASC_ERROR(-1); |
6642 | } |
6643 | |
6644 | /* |
6645 | * Execute the command. If there is no error, add the command |
6646 | * to the active queue. |
6647 | */ |
6648 | switch (ret = AdvExeScsiQueue(adv_dvc_varp, adv_scsiqp)) { |
6649 | case ASC_NOERROR1: |
6650 | ASC_STATS(scp->host, exe_noerror)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_noerror++); |
6651 | /* |
6652 | * Increment monotonically increasing per device successful |
6653 | * request counter. Wrapping doesn't matter. |
6654 | */ |
6655 | boardp->reqcnt[scp->target]++; |
6656 | asc_enqueue(&boardp->active, scp, ASC_BACK2); |
6657 | ASC_DBG(1, |
6658 | "asc_execute_scsi_cmnd: AdvExeScsiQueue(), ASC_NOERROR\n"); |
6659 | break; |
6660 | case ASC_BUSY0: |
6661 | /* Caller must enqueue request and retry later. */ |
6662 | ASC_STATS(scp->host, exe_busy)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_busy++); |
6663 | break; |
6664 | case ASC_ERROR(-1): |
6665 | ASC_PRINT2({ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
6666 | "asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() ASC_ERROR, err_code %x\n",{ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
6667 | boardp->id, adv_dvc_varp->err_code){ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() ASC_ERROR, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); }; |
6668 | ASC_STATS(scp->host, exe_error)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_error++); |
6669 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6670 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6671 | break; |
6672 | default: |
6673 | ASC_PRINT2({ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
6674 | "asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() unknown, err_code %x\n",{ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); } |
6675 | boardp->id, adv_dvc_varp->err_code){ printk("advansys: "); printk(("asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() unknown, err_code %x\n" ), (boardp->id), (adv_dvc_varp->err_code)); }; |
6676 | ASC_STATS(scp->host, exe_unknown)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .exe_unknown++); |
6677 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6678 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6679 | break; |
6680 | } |
6681 | } |
6682 | |
6683 | ASC_DBG(1, "asc_execute_scsi_cmnd: end\n"); |
6684 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6684); } }; |
6685 | return ret; |
6686 | } |
6687 | |
6688 | /* |
6689 | * Build a request structure for the Asc Library (Narrow Board). |
6690 | * |
6691 | * The global structures 'asc_scsi_q' and 'asc_sg_head' are |
6692 | * used to build the request. |
6693 | * |
6694 | * If an error occurs, then return ASC_ERROR. |
6695 | */ |
6696 | STATICstatic int |
6697 | asc_build_req(asc_board_t *boardp, Scsi_Cmnd *scp) |
6698 | { |
6699 | /* |
6700 | * Mutually exclusive access is required to 'asc_scsi_q' and |
6701 | * 'asc_sg_head' until after the request is started. |
6702 | */ |
6703 | memset(&asc_scsi_q, 0, sizeof(ASC_SCSI_Q))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(ASC_SCSI_Q ))) ? __constant_c_and_count_memset(((&asc_scsi_q)),((0x01010101UL *(unsigned char)(0))),((sizeof(ASC_SCSI_Q)))) : __constant_c_memset (((&asc_scsi_q)),((0x01010101UL*(unsigned char)(0))),((sizeof (ASC_SCSI_Q))))) : (__builtin_constant_p((sizeof(ASC_SCSI_Q)) ) ? __memset_generic((((&asc_scsi_q))),(((0))),(((sizeof( ASC_SCSI_Q))))) : __memset_generic(((&asc_scsi_q)),((0)), ((sizeof(ASC_SCSI_Q)))))); |
6704 | |
6705 | /* |
6706 | * Point the ASC_SCSI_Q to the 'Scsi_Cmnd'. |
6707 | */ |
6708 | asc_scsi_q.q2.srb_ptr = (ulong) scp; |
6709 | |
6710 | /* |
6711 | * Build the ASC_SCSI_Q request. |
6712 | */ |
6713 | ASC_ASSERT(scp->cmd_len <= ASC_MAX_CDB_LEN){ if (!(scp->cmd_len <= 12)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6713); } }; |
6714 | if (scp->cmd_len > ASC_MAX_CDB_LEN12) { |
6715 | scp->cmd_len = ASC_MAX_CDB_LEN12; |
6716 | } |
6717 | asc_scsi_q.cdbptr = &scp->cmnd[0]; |
6718 | asc_scsi_q.q2.cdb_len = scp->cmd_len; |
6719 | asc_scsi_q.q1.target_id = ASC_TID_TO_TARGET_ID(scp->target)(uchar)(0x01 << (scp->target)); |
6720 | asc_scsi_q.q1.target_lun = scp->lun; |
6721 | asc_scsi_q.q2.target_ix = ASC_TIDLUN_TO_IX(scp->target, scp->lun)(uchar)((scp->target) + ((scp->lun)<<3)); |
6722 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
6723 | asc_scsi_q.q1.sense_addr = (ulong) &scp->sense_buffer[0]; |
6724 | #else /* version >= v2.0.0 */ |
6725 | asc_scsi_q.q1.sense_addr = virt_to_busvirt_to_phys(&scp->sense_buffer[0]); |
6726 | #endif /* version >= v2.0.0 */ |
6727 | asc_scsi_q.q1.sense_len = sizeof(scp->sense_buffer); |
6728 | |
6729 | /* |
6730 | * If there are any outstanding requests for the current target, |
6731 | * then every 255th request send an ORDERED request. This heuristic |
6732 | * tries to retain the benefit of request sorting while preventing |
6733 | * request starvation. 255 is the max number of tags or pending commands |
6734 | * a device may have outstanding. |
6735 | * |
6736 | * The request count is incremented below for every successfully |
6737 | * started request. |
6738 | * |
6739 | */ |
6740 | if ((boardp->dvc_var.asc_dvc_var.cur_dvc_qng[scp->target] > 0) && |
6741 | (boardp->reqcnt[scp->target] % 255) == 0) { |
6742 | asc_scsi_q.q2.tag_code = M2_QTAG_MSG_ORDERED0x22; |
6743 | } else { |
6744 | asc_scsi_q.q2.tag_code = M2_QTAG_MSG_SIMPLE0x20; |
6745 | } |
6746 | |
6747 | /* |
6748 | * Build ASC_SCSI_Q for a contiguous buffer or a scatter-gather |
6749 | * buffer command. |
6750 | */ |
6751 | if (scp->use_sg == 0) { |
6752 | /* |
6753 | * CDB request of single contiguous buffer. |
6754 | */ |
6755 | ASC_STATS(scp->host, cont_cnt)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_cnt++); |
6756 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
6757 | asc_scsi_q.q1.data_addr = (ulong) scp->request_buffer; |
6758 | #else /* version >= v2.0.0 */ |
6759 | asc_scsi_q.q1.data_addr = virt_to_busvirt_to_phys(scp->request_buffer); |
6760 | #endif /* version >= v2.0.0 */ |
6761 | asc_scsi_q.q1.data_cnt = scp->request_bufflen; |
6762 | ASC_STATS_ADD(scp->host, cont_xfer,(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_xfer += ((((scp->request_bufflen) + ((512) - 1))/(512 )))) |
6763 | ASC_CEILING(scp->request_bufflen, 512))(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_xfer += ((((scp->request_bufflen) + ((512) - 1))/(512 )))); |
6764 | asc_scsi_q.q1.sg_queue_cnt = 0; |
6765 | asc_scsi_q.sg_head = NULL((void *) 0); |
6766 | } else { |
6767 | /* |
6768 | * CDB scatter-gather request list. |
6769 | */ |
6770 | int sgcnt; |
6771 | struct scatterlist *slp; |
6772 | |
6773 | if (scp->use_sg > scp->host->sg_tablesize) { |
6774 | ASC_PRINT3({ printk("advansys: "); printk(("asc_build_req: board %d: use_sg %d > sg_tablesize %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); } |
6775 | "asc_build_req: board %d: use_sg %d > sg_tablesize %d\n",{ printk("advansys: "); printk(("asc_build_req: board %d: use_sg %d > sg_tablesize %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); } |
6776 | boardp->id, scp->use_sg, scp->host->sg_tablesize){ printk("advansys: "); printk(("asc_build_req: board %d: use_sg %d > sg_tablesize %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); }; |
6777 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6778 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6779 | return ASC_ERROR(-1); |
6780 | } |
6781 | |
6782 | ASC_STATS(scp->host, sg_cnt)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_cnt++); |
6783 | |
6784 | /* |
6785 | * Use global ASC_SG_HEAD structure and set the ASC_SCSI_Q |
6786 | * structure to point to it. |
6787 | */ |
6788 | memset(&asc_sg_head, 0, sizeof(ASC_SG_HEAD))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(ASC_SG_HEAD ))) ? __constant_c_and_count_memset(((&asc_sg_head)),((0x01010101UL *(unsigned char)(0))),((sizeof(ASC_SG_HEAD)))) : __constant_c_memset (((&asc_sg_head)),((0x01010101UL*(unsigned char)(0))),((sizeof (ASC_SG_HEAD))))) : (__builtin_constant_p((sizeof(ASC_SG_HEAD ))) ? __memset_generic((((&asc_sg_head))),(((0))),(((sizeof (ASC_SG_HEAD))))) : __memset_generic(((&asc_sg_head)),((0 )),((sizeof(ASC_SG_HEAD)))))); |
6789 | |
6790 | asc_scsi_q.q1.cntl |= QC_SG_HEAD0x04; |
6791 | asc_scsi_q.sg_head = &asc_sg_head; |
6792 | asc_scsi_q.q1.data_cnt = 0; |
6793 | asc_scsi_q.q1.data_addr = 0; |
6794 | asc_sg_head.entry_cnt = asc_scsi_q.q1.sg_queue_cnt = scp->use_sg; |
6795 | ASC_STATS_ADD(scp->host, sg_elem, asc_sg_head.entry_cnt)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_elem += (asc_sg_head.entry_cnt)); |
6796 | |
6797 | /* |
6798 | * Convert scatter-gather list into ASC_SG_HEAD list. |
6799 | */ |
6800 | slp = (struct scatterlist *) scp->request_buffer; |
6801 | for (sgcnt = 0; sgcnt < scp->use_sg; sgcnt++, slp++) { |
6802 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
6803 | asc_sg_head.sg_list[sgcnt].addr = (ulong) slp->address; |
6804 | #else /* version >= v2.0.0 */ |
6805 | asc_sg_head.sg_list[sgcnt].addr = virt_to_busvirt_to_phys(slp->address); |
6806 | #endif /* version >= v2.0.0 */ |
6807 | asc_sg_head.sg_list[sgcnt].bytes = slp->length; |
6808 | ASC_STATS_ADD(scp->host, sg_xfer, ASC_CEILING(slp->length, 512))(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_xfer += ((((slp->length) + ((512) - 1))/(512)))); |
6809 | } |
6810 | } |
6811 | |
6812 | ASC_DBG_PRT_ASC_SCSI_Q(2, &asc_scsi_q); |
6813 | ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); |
6814 | |
6815 | return ASC_NOERROR1; |
6816 | } |
6817 | |
6818 | /* |
6819 | * Build a request structure for the Adv Library (Wide Board). |
6820 | * |
6821 | * If an adv_req_t can not be allocated to issue the request, |
6822 | * then return ASC_BUSY. If an error occurs, then return ASC_ERROR. |
6823 | */ |
6824 | STATICstatic int |
6825 | adv_build_req(asc_board_t *boardp, Scsi_Cmnd *scp, |
6826 | ADV_SCSI_REQ_Q **adv_scsiqpp) |
6827 | { |
6828 | adv_req_t *reqp; |
6829 | ADV_SCSI_REQ_Q *scsiqp; |
6830 | int i; |
6831 | |
6832 | /* |
6833 | * Allocate an adv_req_t structure from the board to execute |
6834 | * the command. |
6835 | */ |
6836 | if (boardp->adv_reqp == NULL((void *) 0)) { |
6837 | ASC_DBG(1, "adv_build_req: no free adv_req_t\n"); |
6838 | ASC_STATS(scp->host, adv_build_noreq)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .adv_build_noreq++); |
6839 | return ASC_BUSY0; |
6840 | } else { |
6841 | reqp = boardp->adv_reqp; |
6842 | boardp->adv_reqp = reqp->next_reqp; |
6843 | reqp->next_reqp = NULL((void *) 0); |
6844 | } |
6845 | |
6846 | /* |
6847 | * Get 4-byte aligned ADV_SCSI_REQ_Q and ADV_SG_BLOCK pointers. |
6848 | */ |
6849 | scsiqp = (ADV_SCSI_REQ_Q *) ADV_DWALIGN(&reqp->scsi_req_q)(((ulong) (&reqp->scsi_req_q) + 0x3) & ~0x3); |
6850 | memset(scsiqp, 0, sizeof(ADV_SCSI_REQ_Q))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(ADV_SCSI_REQ_Q ))) ? __constant_c_and_count_memset(((scsiqp)),((0x01010101UL *(unsigned char)(0))),((sizeof(ADV_SCSI_REQ_Q)))) : __constant_c_memset (((scsiqp)),((0x01010101UL*(unsigned char)(0))),((sizeof(ADV_SCSI_REQ_Q ))))) : (__builtin_constant_p((sizeof(ADV_SCSI_REQ_Q))) ? __memset_generic ((((scsiqp))),(((0))),(((sizeof(ADV_SCSI_REQ_Q))))) : __memset_generic (((scsiqp)),((0)),((sizeof(ADV_SCSI_REQ_Q)))))); |
6851 | |
6852 | /* |
6853 | * Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure. |
6854 | */ |
6855 | scsiqp->srb_ptr = (ulong) reqp; |
6856 | |
6857 | /* |
6858 | * Set the adv_req_t 'cmndp' to point to the Scsi_Cmnd structure. |
6859 | */ |
6860 | reqp->cmndp = scp; |
6861 | |
6862 | /* |
6863 | * Build the ADV_SCSI_REQ_Q request. |
6864 | */ |
6865 | |
6866 | /* |
6867 | * Set CDB length and copy it to the request structure. |
6868 | */ |
6869 | ASC_ASSERT(scp->cmd_len <= ASC_MAX_CDB_LEN){ if (!(scp->cmd_len <= 12)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6869); } }; |
6870 | if (scp->cmd_len > ASC_MAX_CDB_LEN12) { |
6871 | scp->cmd_len = ASC_MAX_CDB_LEN12; |
6872 | } |
6873 | scsiqp->cdb_len = scp->cmd_len; |
6874 | for (i = 0; i < scp->cmd_len; i++) { |
6875 | scsiqp->cdb[i] = scp->cmnd[i]; |
6876 | } |
6877 | |
6878 | scsiqp->target_id = scp->target; |
6879 | scsiqp->target_lun = scp->lun; |
6880 | |
6881 | scsiqp->vsense_addr = (ulong) &scp->sense_buffer[0]; |
6882 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
6883 | scsiqp->sense_addr = (ulong) &scp->sense_buffer[0]; |
6884 | #else /* version >= v2.0.0 */ |
6885 | scsiqp->sense_addr = virt_to_busvirt_to_phys(&scp->sense_buffer[0]); |
6886 | #endif /* version >= v2.0.0 */ |
6887 | scsiqp->sense_len = sizeof(scp->sense_buffer); |
6888 | |
6889 | /* |
6890 | * Build ADV_SCSI_REQ_Q for a contiguous buffer or a scatter-gather |
6891 | * buffer command. |
6892 | */ |
6893 | scsiqp->data_cnt = scp->request_bufflen; |
6894 | scsiqp->vdata_addr = (ulong) scp->request_buffer; |
6895 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
6896 | scsiqp->data_addr = (ulong) scp->request_buffer; |
6897 | #else /* version >= v2.0.0 */ |
6898 | scsiqp->data_addr = virt_to_busvirt_to_phys(scp->request_buffer); |
6899 | #endif /* version >= v2.0.0 */ |
6900 | |
6901 | if (scp->use_sg == 0) { |
6902 | /* |
6903 | * CDB request of single contiguous buffer. |
6904 | */ |
6905 | reqp->sgblkp = NULL((void *) 0); |
6906 | scsiqp->sg_list_ptr = NULL((void *) 0); |
6907 | ASC_STATS(scp->host, cont_cnt)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_cnt++); |
6908 | ASC_STATS_ADD(scp->host, cont_xfer,(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_xfer += ((((scp->request_bufflen) + ((512) - 1))/(512 )))) |
6909 | ASC_CEILING(scp->request_bufflen, 512))(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .cont_xfer += ((((scp->request_bufflen) + ((512) - 1))/(512 )))); |
6910 | } else { |
6911 | /* |
6912 | * CDB scatter-gather request list. |
6913 | */ |
6914 | if (scp->use_sg > ADV_MAX_SG_LIST64) { |
6915 | ASC_PRINT3({ printk("advansys: "); printk(("adv_build_req: board %d: use_sg %d > ADV_MAX_SG_LIST %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); } |
6916 | "adv_build_req: board %d: use_sg %d > ADV_MAX_SG_LIST %d\n",{ printk("advansys: "); printk(("adv_build_req: board %d: use_sg %d > ADV_MAX_SG_LIST %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); } |
6917 | boardp->id, scp->use_sg, scp->host->sg_tablesize){ printk("advansys: "); printk(("adv_build_req: board %d: use_sg %d > ADV_MAX_SG_LIST %d\n" ), (boardp->id), (scp->use_sg), (scp->host->sg_tablesize )); }; |
6918 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
6919 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
6920 | |
6921 | /* |
6922 | * Free the 'adv_req_t' structure by adding it back to the |
6923 | * board free list. |
6924 | */ |
6925 | reqp->next_reqp = boardp->adv_reqp; |
6926 | boardp->adv_reqp = reqp; |
6927 | |
6928 | return ASC_ERROR(-1); |
6929 | } |
6930 | |
6931 | /* |
6932 | * Allocate an 'adv_sgblk_t' structure from the board to |
6933 | * execute the command. |
6934 | */ |
6935 | if (boardp->adv_sgblkp == NULL((void *) 0)) { |
6936 | ASC_DBG(1, "adv_build_req: no free adv_sgblk_t\n"); |
6937 | ASC_STATS(scp->host, adv_build_nosg)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .adv_build_nosg++); |
6938 | /* |
6939 | * Free the 'adv_req_t' structure by adding it back to the |
6940 | * board free list. |
6941 | */ |
6942 | reqp->next_reqp = boardp->adv_reqp; |
6943 | boardp->adv_reqp = reqp; |
6944 | return ASC_BUSY0; |
6945 | } else { |
6946 | reqp->sgblkp = boardp->adv_sgblkp; |
6947 | boardp->adv_sgblkp = reqp->sgblkp->next_sgblkp; |
6948 | reqp->sgblkp->next_sgblkp = NULL((void *) 0); |
6949 | } |
6950 | |
6951 | /* |
6952 | * Build scatter-gather list. |
6953 | */ |
6954 | scsiqp->sg_list_ptr = (ADV_SG_BLOCK *) |
6955 | ADV_DWALIGN(&reqp->sgblkp->sg_block[0])(((ulong) (&reqp->sgblkp->sg_block[0]) + 0x3) & ~0x3); |
6956 | |
6957 | memset(scsiqp->sg_list_ptr, 0, sizeof(ADV_SG_BLOCK) *(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(ADV_SG_BLOCK ) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + ( 15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))) ? __constant_c_and_count_memset (((scsiqp->sg_list_ptr)),((0x01010101UL*(unsigned char)(0) )),((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof (ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1 ))/(1 << 12)))))) : __constant_c_memset(((scsiqp->sg_list_ptr )),((0x01010101UL*(unsigned char)(0))),((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + ( 15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))))) : (__builtin_constant_p((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1 ))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + (( 1 << 12) - 1))/(1 << 12))))) ? __memset_generic(( ((scsiqp->sg_list_ptr))),(((0))),(((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))))) : __memset_generic (((scsiqp->sg_list_ptr)),((0)),((sizeof(ADV_SG_BLOCK) * (( (64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1 ))/15)) + ((1 << 12) - 1))/(1 << 12)))))))) |
6958 | (ADV_NUM_SG_BLOCK + ADV_NUM_PAGE_CROSSING))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(ADV_SG_BLOCK ) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + ( 15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))) ? __constant_c_and_count_memset (((scsiqp->sg_list_ptr)),((0x01010101UL*(unsigned char)(0) )),((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof (ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1 ))/(1 << 12)))))) : __constant_c_memset(((scsiqp->sg_list_ptr )),((0x01010101UL*(unsigned char)(0))),((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + ( 15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))))) : (__builtin_constant_p((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1 ))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + (( 1 << 12) - 1))/(1 << 12))))) ? __memset_generic(( ((scsiqp->sg_list_ptr))),(((0))),(((sizeof(ADV_SG_BLOCK) * (((64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1))/15)) + ((1 << 12) - 1))/(1 << 12))))))) : __memset_generic (((scsiqp->sg_list_ptr)),((0)),((sizeof(ADV_SG_BLOCK) * (( (64 + (15 - 1))/15) + (((sizeof(ADV_SG_BLOCK) * ((64 + (15 - 1 ))/15)) + ((1 << 12) - 1))/(1 << 12)))))))); |
6959 | |
6960 | if (adv_get_sglist(&boardp->dvc_var.adv_dvc_var, scsiqp, scp) == |
6961 | ADV_ERROR(-1)) { |
6962 | |
6963 | /* |
6964 | * Free the adv_sgblk_t structure, if any, by adding it back |
6965 | * to the board free list. |
6966 | */ |
6967 | ASC_ASSERT(reqp->sgblkp != NULL){ if (!(reqp->sgblkp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 6967); } }; |
6968 | reqp->sgblkp->next_sgblkp = boardp->adv_sgblkp; |
6969 | boardp->adv_sgblkp = reqp->sgblkp; |
6970 | |
6971 | /* |
6972 | * Free the adv_req_t structure by adding it back to the |
6973 | * board free list. |
6974 | */ |
6975 | reqp->next_reqp = boardp->adv_reqp; |
6976 | boardp->adv_reqp = reqp; |
6977 | |
6978 | return ADV_ERROR(-1); |
6979 | } |
6980 | |
6981 | ASC_STATS(scp->host, sg_cnt)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_cnt++); |
6982 | ASC_STATS_ADD(scp->host, sg_elem, scp->use_sg)(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_elem += (scp->use_sg)); |
6983 | } |
6984 | |
6985 | ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); |
6986 | ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); |
6987 | |
6988 | *adv_scsiqpp = scsiqp; |
6989 | |
6990 | return ASC_NOERROR1; |
6991 | } |
6992 | |
6993 | /* |
6994 | * Build scatter-gather list for Adv Library (Wide Board). |
6995 | * |
6996 | * Return: |
6997 | * ADV_SUCCESS(1) - SG List successfully created |
6998 | * ADV_ERROR(-1) - SG List creation failed |
6999 | */ |
7000 | STATICstatic int |
7001 | adv_get_sglist(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp, |
7002 | Scsi_Cmnd *scp) |
7003 | { |
7004 | ADV_SG_BLOCK *sg_block; /* virtual address of a SG */ |
7005 | ulong sg_block_next_addr; /* block and its next */ |
7006 | ulong sg_block_physical_addr; |
7007 | int sg_block_index, i; /* how many SG entries */ |
7008 | struct scatterlist *slp; |
7009 | int sg_elem_cnt; |
7010 | |
7011 | slp = (struct scatterlist *) scp->request_buffer; |
7012 | sg_elem_cnt = scp->use_sg; |
7013 | |
7014 | sg_block = scsiqp->sg_list_ptr; |
7015 | sg_block_next_addr = (ulong) sg_block; /* allow math operation */ |
7016 | sg_block_physical_addr = |
7017 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
7018 | (ulong) scsiqp->sg_list_ptr; |
7019 | #else /* version >= v2.0.0 */ |
7020 | virt_to_busvirt_to_phys(scsiqp->sg_list_ptr); |
7021 | #endif /* version >= v2.0.0 */ |
7022 | ADV_ASSERT(ADV_DWALIGN(sg_block_physical_addr) =={ if (!((((ulong) (sg_block_physical_addr) + 0x3) & ~0x3) == sg_block_physical_addr)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7023); } } |
7023 | sg_block_physical_addr){ if (!((((ulong) (sg_block_physical_addr) + 0x3) & ~0x3) == sg_block_physical_addr)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7023); } }; |
7024 | scsiqp->sg_real_addr = sg_block_physical_addr; |
7025 | |
7026 | sg_block_index = 0; |
7027 | do |
7028 | { |
7029 | sg_block->first_entry_no = sg_block_index; |
7030 | for (i = 0; i < NO_OF_SG_PER_BLOCK15; i++) |
7031 | { |
7032 | sg_block->sg_list[i].sg_addr = |
7033 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
7034 | (ulong) slp->address; |
7035 | #else /* version >= v2.0.0 */ |
7036 | virt_to_busvirt_to_phys(slp->address); |
7037 | #endif /* version >= v2.0.0 */ |
7038 | sg_block->sg_list[i].sg_count = slp->length; |
7039 | ASC_STATS_ADD(scp->host, sg_xfer, ASC_CEILING(slp->length, 512))(((asc_board_t *) &((scp->host)->hostdata))->asc_stats .sg_xfer += ((((slp->length) + ((512) - 1))/(512)))); |
7040 | |
7041 | if (--sg_elem_cnt == 0) |
7042 | { /* last entry, get out */ |
7043 | scsiqp->sg_entry_cnt = sg_block_index + i + 1; |
7044 | sg_block->last_entry_no = sg_block_index + i; |
7045 | sg_block->sg_ptr = 0L; /* next link = NULL */ |
7046 | return ADV_SUCCESS1; |
7047 | } |
7048 | slp++; |
7049 | } |
7050 | sg_block_next_addr += sizeof(ADV_SG_BLOCK); |
7051 | sg_block_physical_addr += sizeof(ADV_SG_BLOCK); |
7052 | ADV_ASSERT(ADV_DWALIGN(sg_block_physical_addr) =={ if (!((((ulong) (sg_block_physical_addr) + 0x3) & ~0x3) == sg_block_physical_addr)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7053); } } |
7053 | sg_block_physical_addr){ if (!((((ulong) (sg_block_physical_addr) + 0x3) & ~0x3) == sg_block_physical_addr)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7053); } }; |
7054 | |
7055 | sg_block_index += NO_OF_SG_PER_BLOCK15; |
7056 | sg_block->sg_ptr = (ADV_SG_BLOCK *) sg_block_physical_addr; |
7057 | sg_block->last_entry_no = sg_block_index - 1; |
7058 | sg_block = (ADV_SG_BLOCK *) sg_block_next_addr; /* virtual addr */ |
7059 | } |
7060 | while (1); |
7061 | /* NOTREACHED */ |
7062 | } |
7063 | |
7064 | /* |
7065 | * asc_isr_callback() - Second Level Interrupt Handler called by AscISR(). |
7066 | * |
7067 | * Interrupt callback function for the Narrow SCSI Asc Library. |
7068 | */ |
7069 | STATICstatic void |
7070 | asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) |
7071 | { |
7072 | asc_board_t *boardp; |
7073 | Scsi_Cmnd *scp; |
7074 | struct Scsi_Host *shp; |
7075 | int underrun = ASC_FALSE0; |
7076 | int i; |
7077 | |
7078 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7078); } }; |
7079 | ASC_DBG2(1, "asc_isr_callback: asc_dvc_varp %x, qdonep %x\n", |
7080 | (unsigned) asc_dvc_varp, (unsigned) qdonep); |
7081 | ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep); |
7082 | |
7083 | /* |
7084 | * Get the Scsi_Cmnd structure and Scsi_Host structure for the |
7085 | * command that has been completed. |
7086 | */ |
7087 | scp = (Scsi_Cmnd *) qdonep->d2.srb_ptr; |
7088 | ASC_DBG1(1, "asc_isr_callback: scp %x\n", (unsigned) scp); |
7089 | |
7090 | if (scp == NULL((void *) 0)) { |
7091 | ASC_PRINT("asc_isr_callback: scp is NULL\n"){ printk("advansys: "); printk("asc_isr_callback: scp is NULL\n" ); }; |
7092 | return; |
7093 | } |
7094 | ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); |
7095 | |
7096 | /* |
7097 | * If the request's host pointer is not valid, display a |
7098 | * message and return. |
7099 | */ |
7100 | shp = scp->host; |
7101 | for (i = 0; i < asc_board_count; i++) { |
7102 | if (asc_host[i] == shp) { |
7103 | break; |
7104 | } |
7105 | } |
7106 | if (i == asc_board_count) { |
7107 | ASC_PRINT2("asc_isr_callback: scp %x has bad host pointer, host %x\n",{ printk("advansys: "); printk(("asc_isr_callback: scp %x has bad host pointer, host %x\n" ), ((unsigned) scp), ((unsigned) shp)); } |
7108 | (unsigned) scp, (unsigned) shp){ printk("advansys: "); printk(("asc_isr_callback: scp %x has bad host pointer, host %x\n" ), ((unsigned) scp), ((unsigned) shp)); }; |
7109 | return; |
7110 | } |
7111 | |
7112 | ASC_STATS(shp, callback)(((asc_board_t *) &((shp)->hostdata))->asc_stats.callback ++); |
7113 | ASC_DBG1(1, "asc_isr_callback: shp %x\n", (unsigned) shp); |
7114 | |
7115 | /* |
7116 | * If the request isn't found on the active queue, it may |
7117 | * have been removed to handle a reset or abort request. |
7118 | * Display a message and return. |
7119 | */ |
7120 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
7121 | ASC_ASSERT(asc_dvc_varp == &boardp->dvc_var.asc_dvc_var){ if (!(asc_dvc_varp == &boardp->dvc_var.asc_dvc_var)) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 7121); } }; |
7122 | if (asc_rmqueue(&boardp->active, scp) == ASC_FALSE0) { |
7123 | ASC_PRINT2("asc_isr_callback: board %d: scp %x not on active queue\n",{ printk("advansys: "); printk(("asc_isr_callback: board %d: scp %x not on active queue\n" ), (boardp->id), ((unsigned) scp)); } |
7124 | boardp->id, (unsigned) scp){ printk("advansys: "); printk(("asc_isr_callback: board %d: scp %x not on active queue\n" ), (boardp->id), ((unsigned) scp)); }; |
7125 | return; |
7126 | } |
7127 | |
7128 | /* |
7129 | * Check for an underrun condition. |
7130 | */ |
7131 | if (scp->request_bufflen != 0 && qdonep->remain_bytes != 0 && |
7132 | qdonep->remain_bytes <= scp->request_bufflen != 0) { |
7133 | ASC_DBG1(1, "asc_isr_callback: underrun condition %u bytes\n", |
7134 | (unsigned) qdonep->remain_bytes); |
7135 | underrun = ASC_TRUE1; |
7136 | } |
7137 | |
7138 | /* |
7139 | * 'qdonep' contains the command's ending status. |
7140 | */ |
7141 | switch (qdonep->d3.done_stat) { |
7142 | case QD_NO_ERROR0x01: |
7143 | ASC_DBG(2, "asc_isr_callback: QD_NO_ERROR\n"); |
7144 | switch (qdonep->d3.host_stat) { |
7145 | case QHSTA_NO_ERROR0x00: |
7146 | scp->result = 0; |
7147 | break; |
7148 | default: |
7149 | /* QHSTA error occurred */ |
7150 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
7151 | break; |
7152 | } |
7153 | |
7154 | /* |
7155 | * If an INQUIRY command completed successfully, then call |
7156 | * the AscInquiryHandling() function to set-up the device. |
7157 | */ |
7158 | if (scp->cmnd[0] == SCSICMD_Inquiry0x12 && scp->lun == 0 && |
7159 | (scp->request_bufflen - qdonep->remain_bytes) >= 8) |
7160 | { |
7161 | AscInquiryHandling(asc_dvc_varp, scp->target & 0x7, |
7162 | (ASC_SCSI_INQUIRY *) scp->request_buffer); |
7163 | } |
7164 | |
7165 | /* |
7166 | * If there was an underrun without any other error, |
7167 | * set DID_ERROR to indicate the underrun error. |
7168 | * |
7169 | * Note: There is no way yet to indicate the number |
7170 | * of underrun bytes. |
7171 | */ |
7172 | if (scp->result == 0 && underrun == ASC_TRUE1) { |
7173 | scp->result = HOST_BYTE(DID_UNDERRUN)((0) << 16); |
7174 | } |
7175 | break; |
7176 | |
7177 | case QD_WITH_ERROR0x04: |
7178 | ASC_DBG(2, "asc_isr_callback: QD_WITH_ERROR\n"); |
7179 | switch (qdonep->d3.host_stat) { |
7180 | case QHSTA_NO_ERROR0x00: |
7181 | if (qdonep->d3.scsi_stat == SS_CHK_CONDITION0x02) { |
7182 | ASC_DBG(2, "asc_isr_callback: SS_CHK_CONDITION\n"); |
7183 | ASC_DBG_PRT_SENSE(2, scp->sense_buffer, |
7184 | sizeof(scp->sense_buffer)); |
7185 | /* |
7186 | * Note: The 'status_byte()' macro used by target drivers |
7187 | * defined in scsi.h shifts the status byte returned by |
7188 | * host drivers right by 1 bit. This is why target drivers |
7189 | * also use right shifted status byte definitions. For |
7190 | * instance target drivers use CHECK_CONDITION, defined to |
7191 | * 0x1, instead of the SCSI defined check condition value |
7192 | * of 0x2. Host drivers are supposed to return the status |
7193 | * byte as it is defined by SCSI. |
7194 | */ |
7195 | scp->result = DRIVER_BYTE(DRIVER_SENSE)((0x08) << 24) | |
7196 | STATUS_BYTE(qdonep->d3.scsi_stat)(qdonep->d3.scsi_stat); |
7197 | } else { |
7198 | scp->result = STATUS_BYTE(qdonep->d3.scsi_stat)(qdonep->d3.scsi_stat); |
7199 | } |
7200 | break; |
7201 | |
7202 | default: |
7203 | /* QHSTA error occurred */ |
7204 | ASC_DBG1(1, "asc_isr_callback: host_stat %x\n", |
7205 | qdonep->d3.host_stat); |
7206 | scp->result = HOST_BYTE(DID_BAD_TARGET)((0x04) << 16); |
7207 | break; |
7208 | } |
7209 | break; |
7210 | |
7211 | case QD_ABORTED_BY_HOST0x02: |
7212 | ASC_DBG(1, "asc_isr_callback: QD_ABORTED_BY_HOST\n"); |
7213 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16) | MSG_BYTE(qdonep->d3.scsi_msg)((qdonep->d3.scsi_msg) << 8) | |
7214 | STATUS_BYTE(qdonep->d3.scsi_stat)(qdonep->d3.scsi_stat); |
7215 | break; |
7216 | |
7217 | default: |
7218 | ASC_DBG1(1, "asc_isr_callback: done_stat %x\n", qdonep->d3.done_stat); |
7219 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16) | MSG_BYTE(qdonep->d3.scsi_msg)((qdonep->d3.scsi_msg) << 8) | |
7220 | STATUS_BYTE(qdonep->d3.scsi_stat)(qdonep->d3.scsi_stat); |
7221 | break; |
7222 | } |
7223 | |
7224 | /* |
7225 | * If the 'init_tidmask' bit isn't already set for the target and the |
7226 | * current request finished normally, then set the bit for the target |
7227 | * to indicate that a device is present. |
7228 | */ |
7229 | if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->target)(0x01 << ((scp->target) & 15))) == 0 && |
7230 | qdonep->d3.done_stat == QD_NO_ERROR0x01 && |
7231 | qdonep->d3.host_stat == QHSTA_NO_ERROR0x00) { |
7232 | boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->target)(0x01 << ((scp->target) & 15)); |
7233 | } |
7234 | |
7235 | /* |
7236 | * Because interrupts may be enabled by the 'Scsi_Cmnd' done |
7237 | * function, add the command to the end of the board's done queue. |
7238 | * The done function for the command will be called from |
7239 | * advansys_interrupt(). |
7240 | */ |
7241 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
7242 | |
7243 | return; |
7244 | } |
7245 | |
7246 | /* |
7247 | * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR(). |
7248 | * |
7249 | * Callback function for the Wide SCSI Adv Library. |
7250 | */ |
7251 | STATICstatic void |
7252 | adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) |
7253 | { |
7254 | asc_board_t *boardp; |
7255 | adv_req_t *reqp; |
7256 | Scsi_Cmnd *scp; |
7257 | struct Scsi_Host *shp; |
7258 | int underrun = ASC_FALSE0; |
7259 | int i; |
7260 | |
7261 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7261); } }; |
7262 | ASC_DBG2(1, "adv_isr_callback: adv_dvc_varp %x, scsiqp %x\n", |
7263 | (unsigned) adv_dvc_varp, (unsigned) scsiqp); |
7264 | ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); |
7265 | |
7266 | /* |
7267 | * Get the adv_req_t structure for the command that has been |
7268 | * completed. The adv_req_t structure actually contains the |
7269 | * completed ADV_SCSI_REQ_Q structure. |
7270 | */ |
7271 | reqp = (adv_req_t *) scsiqp->srb_ptr; |
7272 | ASC_DBG1(1, "adv_isr_callback: reqp %x\n", (unsigned) reqp); |
7273 | if (reqp == NULL((void *) 0)) { |
7274 | ASC_PRINT("adv_isr_callback: reqp is NULL\n"){ printk("advansys: "); printk("adv_isr_callback: reqp is NULL\n" ); }; |
7275 | return; |
7276 | } |
7277 | |
7278 | /* |
7279 | * Get the Scsi_Cmnd structure and Scsi_Host structure for the |
7280 | * command that has been completed. |
7281 | * |
7282 | * Note: The adv_req_t request structure and adv_sgblk_t structure, |
7283 | * if any, * dropped, because a board structure pointer can not be |
7284 | * determined. |
7285 | */ |
7286 | scp = reqp->cmndp; |
7287 | ASC_DBG1(1, "adv_isr_callback: scp %x\n", (unsigned) scp); |
7288 | if (scp == NULL((void *) 0)) { |
7289 | ASC_PRINT("adv_isr_callback: scp is NULL; adv_req_t dropped.\n"){ printk("advansys: "); printk("adv_isr_callback: scp is NULL; adv_req_t dropped.\n" ); }; |
7290 | return; |
7291 | } |
7292 | ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); |
7293 | |
7294 | /* |
7295 | * If the request's host pointer is not valid, display a message |
7296 | * and return. |
7297 | */ |
7298 | shp = scp->host; |
7299 | for (i = 0; i < asc_board_count; i++) { |
7300 | if (asc_host[i] == shp) { |
7301 | break; |
7302 | } |
7303 | } |
7304 | /* |
7305 | * Note: If the host structure is not found, the adv_req_t request |
7306 | * structure and adv_sgblk_t structure, if any, is dropped. |
7307 | */ |
7308 | if (i == asc_board_count) { |
7309 | ASC_PRINT2("adv_isr_callback: scp %x has bad host pointer, host %x\n",{ printk("advansys: "); printk(("adv_isr_callback: scp %x has bad host pointer, host %x\n" ), ((unsigned) scp), ((unsigned) shp)); } |
7310 | (unsigned) scp, (unsigned) shp){ printk("advansys: "); printk(("adv_isr_callback: scp %x has bad host pointer, host %x\n" ), ((unsigned) scp), ((unsigned) shp)); }; |
7311 | return; |
7312 | } |
7313 | |
7314 | ASC_STATS(shp, callback)(((asc_board_t *) &((shp)->hostdata))->asc_stats.callback ++); |
7315 | ASC_DBG1(1, "adv_isr_callback: shp %x\n", (unsigned) shp); |
7316 | |
7317 | /* |
7318 | * If the request isn't found on the active queue, it may have been |
7319 | * removed to handle a reset or abort request. Display a message and |
7320 | * return. |
7321 | * |
7322 | * Note: Because the structure may still be in use don't attempt |
7323 | * to free the adv_req_t and adv_sgblk_t, if any, structures. |
7324 | */ |
7325 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
7326 | ASC_ASSERT(adv_dvc_varp == &boardp->dvc_var.adv_dvc_var){ if (!(adv_dvc_varp == &boardp->dvc_var.adv_dvc_var)) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 7326); } }; |
7327 | if (asc_rmqueue(&boardp->active, scp) == ASC_FALSE0) { |
7328 | ASC_PRINT2("adv_isr_callback: board %d: scp %x not on active queue\n",{ printk("advansys: "); printk(("adv_isr_callback: board %d: scp %x not on active queue\n" ), (boardp->id), ((unsigned) scp)); } |
7329 | boardp->id, (unsigned) scp){ printk("advansys: "); printk(("adv_isr_callback: board %d: scp %x not on active queue\n" ), (boardp->id), ((unsigned) scp)); }; |
7330 | return; |
7331 | } |
7332 | |
7333 | /* |
7334 | * Check for an underrun condition. |
7335 | */ |
7336 | if (scp->request_bufflen != 0 && scsiqp->data_cnt != 0) { |
7337 | ASC_DBG1(1, "adv_isr_callback: underrun condition %lu bytes\n", |
7338 | scsiqp->data_cnt); |
7339 | underrun = ASC_TRUE1; |
7340 | } |
7341 | |
7342 | /* |
7343 | * 'done_status' contains the command's ending status. |
7344 | */ |
7345 | switch (scsiqp->done_status) { |
7346 | case QD_NO_ERROR0x01: |
7347 | ASC_DBG(2, "adv_isr_callback: QD_NO_ERROR\n"); |
7348 | switch (scsiqp->host_status) { |
7349 | case QHSTA_NO_ERROR0x00: |
7350 | scp->result = 0; |
7351 | break; |
7352 | default: |
7353 | /* QHSTA error occurred. */ |
7354 | ASC_DBG1(2, "adv_isr_callback: host_status %x\n", |
7355 | scsiqp->host_status); |
7356 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16); |
7357 | break; |
7358 | } |
7359 | /* |
7360 | * If there was an underrun without any other error, |
7361 | * set DID_ERROR to indicate the underrun error. |
7362 | * |
7363 | * Note: There is no way yet to indicate the number |
7364 | * of underrun bytes. |
7365 | */ |
7366 | if (scp->result == 0 && underrun == ASC_TRUE1) { |
7367 | scp->result = HOST_BYTE(DID_UNDERRUN)((0) << 16); |
7368 | } |
7369 | break; |
7370 | |
7371 | case QD_WITH_ERROR0x04: |
7372 | ASC_DBG(2, "adv_isr_callback: QD_WITH_ERROR\n"); |
7373 | switch (scsiqp->host_status) { |
7374 | case QHSTA_NO_ERROR0x00: |
7375 | if (scsiqp->scsi_status == SS_CHK_CONDITION0x02) { |
7376 | ASC_DBG(2, "adv_isr_callback: SS_CHK_CONDITION\n"); |
7377 | ASC_DBG_PRT_SENSE(2, scp->sense_buffer, |
7378 | sizeof(scp->sense_buffer)); |
7379 | /* |
7380 | * Note: The 'status_byte()' macro used by target drivers |
7381 | * defined in scsi.h shifts the status byte returned by |
7382 | * host drivers right by 1 bit. This is why target drivers |
7383 | * also use right shifted status byte definitions. For |
7384 | * instance target drivers use CHECK_CONDITION, defined to |
7385 | * 0x1, instead of the SCSI defined check condition value |
7386 | * of 0x2. Host drivers are supposed to return the status |
7387 | * byte as it is defined by SCSI. |
7388 | */ |
7389 | scp->result = DRIVER_BYTE(DRIVER_SENSE)((0x08) << 24) | |
7390 | STATUS_BYTE(scsiqp->scsi_status)(scsiqp->scsi_status); |
7391 | } else { |
7392 | scp->result = STATUS_BYTE(scsiqp->scsi_status)(scsiqp->scsi_status); |
7393 | } |
7394 | break; |
7395 | |
7396 | default: |
7397 | /* Some other QHSTA error occurred. */ |
7398 | ASC_DBG1(1, "adv_isr_callback: host_status %x\n", |
7399 | scsiqp->host_status); |
7400 | scp->result = HOST_BYTE(DID_BAD_TARGET)((0x04) << 16); |
7401 | break; |
7402 | } |
7403 | break; |
7404 | |
7405 | case QD_ABORTED_BY_HOST0x02: |
7406 | ASC_DBG(1, "adv_isr_callback: QD_ABORTED_BY_HOST\n"); |
7407 | scp->result = HOST_BYTE(DID_ABORT)((0x05) << 16) | STATUS_BYTE(scsiqp->scsi_status)(scsiqp->scsi_status); |
7408 | break; |
7409 | |
7410 | default: |
7411 | ASC_DBG1(1, "adv_isr_callback: done_status %x\n", scsiqp->done_status); |
7412 | scp->result = HOST_BYTE(DID_ERROR)((0x07) << 16) | STATUS_BYTE(scsiqp->scsi_status)(scsiqp->scsi_status); |
7413 | break; |
7414 | } |
7415 | |
7416 | /* |
7417 | * If the 'init_tidmask' bit isn't already set for the target and the |
7418 | * current request finished normally, then set the bit for the target |
7419 | * to indicate that a device is present. |
7420 | */ |
7421 | if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->target)(0x01 << ((scp->target) & 15))) == 0 && |
7422 | scsiqp->done_status == QD_NO_ERROR0x01 && |
7423 | scsiqp->host_status == QHSTA_NO_ERROR0x00) { |
7424 | boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->target)(0x01 << ((scp->target) & 15)); |
7425 | } |
7426 | |
7427 | /* |
7428 | * Because interrupts may be enabled by the 'Scsi_Cmnd' done |
7429 | * function, add the command to the end of the board's done queue. |
7430 | * The done function for the command will be called from |
7431 | * advansys_interrupt(). |
7432 | */ |
7433 | asc_enqueue(&boardp->done, scp, ASC_BACK2); |
7434 | |
7435 | /* |
7436 | * Free the adv_sgblk_t structure, if any, by adding it back |
7437 | * to the board free list. |
7438 | */ |
7439 | if (reqp->sgblkp != NULL((void *) 0)) { |
7440 | reqp->sgblkp->next_sgblkp = boardp->adv_sgblkp; |
7441 | boardp->adv_sgblkp = reqp->sgblkp; |
7442 | } |
7443 | |
7444 | /* |
7445 | * Free the adv_req_t structure used with the command by adding |
7446 | * it back to the board free list. |
7447 | */ |
7448 | reqp->next_reqp = boardp->adv_reqp; |
7449 | boardp->adv_reqp = reqp; |
7450 | |
7451 | ASC_DBG(1, "adv_isr_callback: done\n"); |
7452 | |
7453 | return; |
7454 | } |
7455 | |
7456 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
7457 | #ifdef ASC_CONFIG_PCI |
7458 | /* |
7459 | * Search for an AdvanSys PCI device in the PCI configuration space. |
7460 | */ |
7461 | ASC_INITFUNC(static int asc_srch_pci_dev(PCI_DEVICE *pciDevice) |
7462 | STATIC intstatic int asc_srch_pci_dev(PCI_DEVICE *pciDevice) |
7463 | asc_srch_pci_dev(PCI_DEVICE *pciDevice)static int asc_srch_pci_dev(PCI_DEVICE *pciDevice) |
7464 | )static int asc_srch_pci_dev(PCI_DEVICE *pciDevice) |
7465 | { |
7466 | int ret = PCI_DEVICE_NOT_FOUND0xffff; |
7467 | |
7468 | ASC_DBG(2, "asc_srch_pci_dev: begin\n"); |
7469 | |
7470 | if (pci_scan_method == -1) { |
7471 | pci_scan_method = asc_scan_method(); |
7472 | } |
7473 | pciDevice->type = pci_scan_method; |
7474 | ASC_DBG1(2, "asc_srch_pci_dev: type %d\n", pciDevice->type); |
7475 | |
7476 | ret = asc_pci_find_dev(pciDevice); |
7477 | ASC_DBG1(2, "asc_srch_pci_dev: asc_pci_find_dev() return %d\n", ret); |
7478 | if (ret == PCI_DEVICE_FOUND0x0000) { |
7479 | pciDevice->slotNumber = pciDevice->slotFound + 1; |
7480 | pciDevice->startSlot = pciDevice->slotFound + 1; |
7481 | } else { |
7482 | if (pciDevice->bridge > pciDevice->busNumber) { |
7483 | ASC_DBG2(2, "asc_srch_pci_dev: bridge %x, busNumber %x\n", |
7484 | pciDevice->bridge, pciDevice->busNumber); |
7485 | pciDevice->busNumber++; |
7486 | pciDevice->slotNumber = 0; |
7487 | pciDevice->startSlot = 0; |
7488 | pciDevice->endSlot = 0x0f; |
7489 | ret = asc_srch_pci_dev(pciDevice); |
7490 | ASC_DBG1(2, "asc_srch_pci_dev: recursive call return %d\n", ret); |
7491 | } |
7492 | } |
7493 | |
7494 | ASC_DBG1(2, "asc_srch_pci_dev: return %d\n", ret); |
7495 | return ret; |
7496 | } |
7497 | |
7498 | /* |
7499 | * Determine the access method to be used for 'pciDevice'. |
7500 | */ |
7501 | ASC_INITFUNC(static uchar asc_scan_method(void) |
7502 | STATIC ucharstatic uchar asc_scan_method(void) |
7503 | asc_scan_method(void)static uchar asc_scan_method(void) |
7504 | )static uchar asc_scan_method(void) |
7505 | { |
7506 | ushort data; |
7507 | PCI_DATA pciData; |
7508 | uchar type; |
7509 | uchar slot; |
7510 | |
7511 | ASC_DBG(2, "asc_scan_method: begin\n"); |
7512 | memset(&pciData, 0, sizeof(pciData))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(pciData ))) ? __constant_c_and_count_memset(((&pciData)),((0x01010101UL *(unsigned char)(0))),((sizeof(pciData)))) : __constant_c_memset (((&pciData)),((0x01010101UL*(unsigned char)(0))),((sizeof (pciData))))) : (__builtin_constant_p((sizeof(pciData))) ? __memset_generic ((((&pciData))),(((0))),(((sizeof(pciData))))) : __memset_generic (((&pciData)),((0)),((sizeof(pciData)))))); |
7513 | for (type = 1; type < 3; type++) { |
7514 | pciData.type = type; |
7515 | for (slot = 0; slot < PCI_MAX_SLOT0x1F; slot++) { |
7516 | pciData.slot = slot; |
7517 | data = asc_get_cfg_word(&pciData); |
7518 | if ((data != 0xFFFF) && (data != 0x0000)) { |
7519 | ASC_DBG2(4, "asc_scan_method: data %x, type %d\n", data, type); |
7520 | return (type); |
7521 | } |
7522 | } |
7523 | } |
7524 | ASC_DBG1(4, "asc_scan_method: type %d\n", type); |
7525 | return (type); |
7526 | } |
7527 | |
7528 | /* |
7529 | * Check for an AdvanSys PCI device in 'pciDevice'. |
7530 | * |
7531 | * Return PCI_DEVICE_FOUND if found, otherwise return PCI_DEVICE_NOT_FOUND. |
7532 | */ |
7533 | ASC_INITFUNC(static int asc_pci_find_dev(PCI_DEVICE *pciDevice) |
7534 | STATIC intstatic int asc_pci_find_dev(PCI_DEVICE *pciDevice) |
7535 | asc_pci_find_dev(PCI_DEVICE *pciDevice)static int asc_pci_find_dev(PCI_DEVICE *pciDevice) |
7536 | )static int asc_pci_find_dev(PCI_DEVICE *pciDevice) |
7537 | { |
7538 | PCI_DATA pciData; |
7539 | ushort vendorid, deviceid; |
7540 | uchar classcode, subclass; |
7541 | uchar lslot; |
7542 | |
7543 | ASC_DBG(3, "asc_pci_find_dev: begin\n"); |
7544 | pciData.type = pciDevice->type; |
7545 | pciData.bus = pciDevice->busNumber; |
7546 | pciData.func = pciDevice->devFunc; |
7547 | lslot = pciDevice->startSlot; |
7548 | for (; lslot < pciDevice->endSlot; lslot++) { |
7549 | pciData.slot = lslot; |
7550 | pciData.offset = VENDORID_OFFSET0x00; |
7551 | vendorid = asc_get_cfg_word(&pciData); |
7552 | ASC_DBG1(3, "asc_pci_find_dev: vendorid %x\n", vendorid); |
7553 | if (vendorid != 0xffff) { |
7554 | pciData.offset = DEVICEID_OFFSET0x02; |
7555 | deviceid = asc_get_cfg_word(&pciData); |
7556 | ASC_DBG1(3, "asc_pci_find_dev: deviceid %x\n", deviceid); |
7557 | if ((vendorid == ASC_PCI_VENDORID0x10CD) && |
7558 | ((deviceid == ASC_PCI_DEVICE_ID_11000x1100) || |
7559 | (deviceid == ASC_PCI_DEVICE_ID_12000x1200) || |
7560 | (deviceid == ASC_PCI_DEVICE_ID_13000x1300) || |
7561 | (deviceid == ASC_PCI_DEVICE_ID_23000x2300))) { |
7562 | pciDevice->slotFound = lslot; |
7563 | ASC_DBG(3, "asc_pci_find_dev: PCI_DEVICE_FOUND\n"); |
7564 | return PCI_DEVICE_FOUND0x0000; |
7565 | } else { |
7566 | pciData.offset = SUBCLASS_OFFSET0x0A; |
7567 | subclass = asc_get_cfg_byte(&pciData); |
7568 | pciData.offset = CLASSCODE_OFFSET0x0B; |
7569 | classcode = asc_get_cfg_byte(&pciData); |
7570 | if ((classcode & PCI_BASE_CLASS_BRIDGE_DEVICE0x06) && |
7571 | (subclass & PCI_SUB_CLASS_PCI_TO_PCI_BRIDGE_CONTROLLER0x04)) { |
7572 | pciDevice->bridge++; |
7573 | } |
7574 | ASC_DBG2(3, "asc_pci_find_dev: subclass %x, classcode %x\n", |
7575 | subclass, classcode); |
7576 | } |
7577 | } |
7578 | } |
7579 | return PCI_DEVICE_NOT_FOUND0xffff; |
7580 | } |
7581 | |
7582 | /* |
7583 | * Read PCI configuration data into 'pciConfig'. |
7584 | */ |
7585 | ASC_INITFUNC(static void asc_get_pci_cfg(PCI_DEVICE *pciDevice, PCI_CONFIG_SPACE *pciConfig) |
7586 | STATIC voidstatic void asc_get_pci_cfg(PCI_DEVICE *pciDevice, PCI_CONFIG_SPACE *pciConfig) |
7587 | asc_get_pci_cfg(PCI_DEVICE *pciDevice, PCI_CONFIG_SPACE *pciConfig)static void asc_get_pci_cfg(PCI_DEVICE *pciDevice, PCI_CONFIG_SPACE *pciConfig) |
7588 | )static void asc_get_pci_cfg(PCI_DEVICE *pciDevice, PCI_CONFIG_SPACE *pciConfig) |
7589 | { |
7590 | PCI_DATA pciData; |
7591 | uchar counter; |
7592 | uchar *localConfig; |
7593 | |
7594 | ASC_DBG1(4, "asc_get_pci_cfg: slotFound %d\n ", |
7595 | pciDevice->slotFound); |
7596 | |
7597 | pciData.type = pciDevice->type; |
7598 | pciData.bus = pciDevice->busNumber; |
7599 | pciData.slot = pciDevice->slotFound; |
7600 | pciData.func = pciDevice->devFunc; |
7601 | localConfig = (uchar *) pciConfig; |
7602 | |
7603 | for (counter = 0; counter < sizeof(PCI_CONFIG_SPACE); counter++) { |
7604 | pciData.offset = counter; |
7605 | *localConfig = asc_get_cfg_byte(&pciData); |
7606 | ASC_DBG1(4, "asc_get_pci_cfg: byte %x\n", *localConfig); |
7607 | localConfig++; |
7608 | } |
7609 | ASC_DBG1(4, "asc_get_pci_cfg: counter %d\n", counter); |
7610 | } |
7611 | |
7612 | /* |
7613 | * Read a word (16 bits) from the PCI configuration space. |
7614 | * |
7615 | * The configuration mechanism is checked for the correct access method. |
7616 | */ |
7617 | ASC_INITFUNC(static ushort asc_get_cfg_word(PCI_DATA *pciData) |
7618 | STATIC ushortstatic ushort asc_get_cfg_word(PCI_DATA *pciData) |
7619 | asc_get_cfg_word(PCI_DATA *pciData)static ushort asc_get_cfg_word(PCI_DATA *pciData) |
7620 | )static ushort asc_get_cfg_word(PCI_DATA *pciData) |
7621 | { |
7622 | ushort tmp; |
7623 | ulong address; |
7624 | ulong lbus = pciData->bus; |
7625 | ulong lslot = pciData->slot; |
7626 | ulong lfunc = pciData->func; |
7627 | uchar t2CFA, t2CF8; |
7628 | ulong t1CF8, t1CFC; |
7629 | |
7630 | ASC_DBG4(4, "asc_get_cfg_word: type %d, bus %lu, slot %lu, func %lu\n", |
7631 | pciData->type, lbus, lslot, lfunc); |
7632 | |
7633 | /* |
7634 | * Check type of configuration mechanism. |
7635 | */ |
7636 | if (pciData->type == 2) { |
7637 | /* |
7638 | * Save registers to be restored later. |
7639 | */ |
7640 | t2CFA = inp(0xCFA)((__builtin_constant_p((0xCFA)) && (0xCFA) < 256) ? __inbc(0xCFA) : __inb(0xCFA)); /* save PCI bus register */ |
7641 | t2CF8 = inp(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inbc(0xCF8) : __inb(0xCF8)); /* save config space enable register */ |
7642 | |
7643 | /* |
7644 | * Write the bus and enable registers. |
7645 | */ |
7646 | /* set for type 1 cycle, if needed */ |
7647 | outp(0xCFA, pciData->bus)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((pciData->bus)),((0xCFA))) : __outb(((pciData ->bus)),((0xCFA)))); |
7648 | /* set the function number */ |
7649 | outp(0xCF8, 0x10 | (pciData->func << 1))((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((0x10 | (pciData->func << 1))),((0xCF8) )) : __outb(((0x10 | (pciData->func << 1))),((0xCF8) ))) ; |
7650 | |
7651 | /* |
7652 | * Read the configuration space type 2 locations. |
7653 | */ |
7654 | tmp = (ushort) inpw(0xC000 | ((pciData->slot << 8) + pciData->offset))((__builtin_constant_p((0xC000 | ((pciData->slot << 8 ) + pciData->offset))) && (0xC000 | ((pciData-> slot << 8) + pciData->offset)) < 256) ? __inwc(0xC000 | ((pciData->slot << 8) + pciData->offset)) : __inw (0xC000 | ((pciData->slot << 8) + pciData->offset ))); |
7655 | |
7656 | outp(0xCFA, t2CFA)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((t2CFA)),((0xCFA))) : __outb(((t2CFA)),((0xCFA)) )); /* save PCI bus register */ |
7657 | outp(0xCF8, t2CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((t2CF8)),((0xCF8))) : __outb(((t2CF8)),((0xCF8)) )); /* save config space enable register */ |
7658 | } else { |
7659 | /* |
7660 | * Type 1 or 3 configuration mechanism. |
7661 | * |
7662 | * Save the CONFIG_ADDRESS and CONFIG_DATA register values. |
7663 | */ |
7664 | t1CF8 = inpl(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inlc(0xCF8) : __inl(0xCF8)); |
7665 | t1CFC = inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)); |
7666 | |
7667 | /* |
7668 | * enable <31>, bus = <23:16>, slot = <15:11>, |
7669 | * func = <10:8>, reg = <7:2> |
7670 | */ |
7671 | address = (ulong) ((lbus << 16) | (lslot << 11) | |
7672 | (lfunc << 8) | (pciData->offset & 0xFC) | 0x80000000L); |
7673 | |
7674 | /* |
7675 | * Write out the address to CONFIG_ADDRESS. |
7676 | */ |
7677 | outpl(0xCF8, address)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((address)),((0xCF8))) : __outl(((address)),((0xCF8 )))); |
7678 | |
7679 | /* |
7680 | * Read in word from CONFIG_DATA. |
7681 | */ |
7682 | tmp = (ushort) ((inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)) >> |
7683 | ((pciData->offset & 2) * 8)) & 0xFFFF); |
7684 | |
7685 | /* |
7686 | * Restore registers. |
7687 | */ |
7688 | outpl(0xCF8, t1CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((t1CF8)),((0xCF8))) : __outl(((t1CF8)),((0xCF8)) )); |
7689 | outpl(0xCFC, t1CFC)((__builtin_constant_p(((0xCFC))) && ((0xCFC)) < 256 ) ? __outlc(((t1CFC)),((0xCFC))) : __outl(((t1CFC)),((0xCFC)) )); |
7690 | } |
7691 | ASC_DBG1(4, "asc_get_cfg_word: config data: %x\n", tmp); |
7692 | return tmp; |
7693 | } |
7694 | |
7695 | /* |
7696 | * Reads a byte from the PCI configuration space. |
7697 | * |
7698 | * The configuration mechanism is checked for the correct access method. |
7699 | */ |
7700 | ASC_INITFUNC(static uchar asc_get_cfg_byte(PCI_DATA *pciData) |
7701 | STATIC ucharstatic uchar asc_get_cfg_byte(PCI_DATA *pciData) |
7702 | asc_get_cfg_byte(PCI_DATA *pciData)static uchar asc_get_cfg_byte(PCI_DATA *pciData) |
7703 | )static uchar asc_get_cfg_byte(PCI_DATA *pciData) |
7704 | { |
7705 | uchar tmp; |
7706 | ulong address; |
7707 | ulong lbus = pciData->bus, lslot = pciData->slot, lfunc = pciData->func; |
7708 | uchar t2CFA, t2CF8; |
7709 | ulong t1CF8, t1CFC; |
7710 | |
7711 | ASC_DBG1(4, "asc_get_cfg_byte: type: %d\n", pciData->type); |
7712 | |
7713 | /* |
7714 | * Check type of configuration mechanism. |
7715 | */ |
7716 | if (pciData->type == 2) { |
7717 | /* |
7718 | * Save registers to be restored later. |
7719 | */ |
7720 | t2CFA = inp(0xCFA)((__builtin_constant_p((0xCFA)) && (0xCFA) < 256) ? __inbc(0xCFA) : __inb(0xCFA)); /* save PCI bus register */ |
7721 | t2CF8 = inp(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inbc(0xCF8) : __inb(0xCF8)); /* save config space enable register */ |
7722 | |
7723 | /* |
7724 | * Write the bus and enable registers. |
7725 | */ |
7726 | /* set for type 1 cycle, if needed */ |
7727 | outp(0xCFA, pciData->bus)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((pciData->bus)),((0xCFA))) : __outb(((pciData ->bus)),((0xCFA)))); |
7728 | /* set the function number */ |
7729 | outp(0xCF8, 0x10 | (pciData->func << 1))((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((0x10 | (pciData->func << 1))),((0xCF8) )) : __outb(((0x10 | (pciData->func << 1))),((0xCF8) ))); |
7730 | |
7731 | /* |
7732 | * Read configuration space type 2 locations. |
7733 | */ |
7734 | tmp = inp(0xC000 | ((pciData->slot << 8) + pciData->offset))((__builtin_constant_p((0xC000 | ((pciData->slot << 8 ) + pciData->offset))) && (0xC000 | ((pciData-> slot << 8) + pciData->offset)) < 256) ? __inbc(0xC000 | ((pciData->slot << 8) + pciData->offset)) : __inb (0xC000 | ((pciData->slot << 8) + pciData->offset ))); |
7735 | |
7736 | /* |
7737 | * Restore registers. |
7738 | */ |
7739 | outp(0xCF8, t2CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((t2CF8)),((0xCF8))) : __outb(((t2CF8)),((0xCF8)) )); /* restore the enable register */ |
7740 | outp(0xCFA, t2CFA)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((t2CFA)),((0xCFA))) : __outb(((t2CFA)),((0xCFA)) )); /* restore PCI bus register */ |
7741 | } else { |
7742 | /* |
7743 | * Type 1 or 3 configuration mechanism. |
7744 | * |
7745 | * Save CONFIG_ADDRESS and CONFIG_DATA register values. |
7746 | */ |
7747 | t1CF8 = inpl(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inlc(0xCF8) : __inl(0xCF8)); |
7748 | t1CFC = inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)); |
7749 | |
7750 | /* |
7751 | * enable <31>, bus = <23:16>, slot = <15:11>, func = <10:8>, |
7752 | * reg = <7:2> |
7753 | */ |
7754 | address = (ulong) ((lbus << 16) | (lslot << 11) | |
7755 | (lfunc << 8) | (pciData->offset & 0xFC) | 0x80000000L); |
7756 | |
7757 | /* |
7758 | * Write out address to CONFIG_ADDRESS. |
7759 | */ |
7760 | outpl(0xCF8, address)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((address)),((0xCF8))) : __outl(((address)),((0xCF8 )))); |
7761 | |
7762 | /* |
7763 | * Read in word from CONFIG_DATA. |
7764 | */ |
7765 | tmp = (uchar) ((inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)) >> ((pciData->offset & 3) * 8)) & 0xFF); |
7766 | |
7767 | /* |
7768 | * Restore registers. |
7769 | */ |
7770 | outpl(0xCF8, t1CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((t1CF8)),((0xCF8))) : __outl(((t1CF8)),((0xCF8)) )); |
7771 | outpl(0xCFC, t1CFC)((__builtin_constant_p(((0xCFC))) && ((0xCFC)) < 256 ) ? __outlc(((t1CFC)),((0xCFC))) : __outl(((t1CFC)),((0xCFC)) )); |
7772 | } |
7773 | ASC_DBG1(4, "asc_get_cfg_byte: config data: %x\n", tmp); |
7774 | return tmp; |
7775 | } |
7776 | |
7777 | /* |
7778 | * Write a byte to the PCI configuration space. |
7779 | */ |
7780 | ASC_INITFUNC(static void asc_put_cfg_byte(PCI_DATA *pciData, uchar byte_data ) |
7781 | STATIC voidstatic void asc_put_cfg_byte(PCI_DATA *pciData, uchar byte_data ) |
7782 | asc_put_cfg_byte(PCI_DATA *pciData, uchar byte_data)static void asc_put_cfg_byte(PCI_DATA *pciData, uchar byte_data ) |
7783 | )static void asc_put_cfg_byte(PCI_DATA *pciData, uchar byte_data ) |
7784 | { |
7785 | ulong tmpl; |
7786 | ulong address; |
7787 | ulong lbus = pciData->bus, lslot = pciData->slot, lfunc = pciData->func; |
7788 | uchar t2CFA, t2CF8; |
7789 | ulong t1CF8, t1CFC; |
7790 | |
7791 | ASC_DBG2(4, "asc_put_cfg_byte: type: %d, byte_data %x\n", |
7792 | pciData->type, byte_data); |
7793 | |
7794 | /* |
7795 | * Check type of configuration mechanism. |
7796 | */ |
7797 | if (pciData->type == 2) { |
7798 | |
7799 | /* |
7800 | * Save registers to be restored later. |
7801 | */ |
7802 | t2CFA = inp(0xCFA)((__builtin_constant_p((0xCFA)) && (0xCFA) < 256) ? __inbc(0xCFA) : __inb(0xCFA)); /* save PCI bus register */ |
7803 | t2CF8 = inp(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inbc(0xCF8) : __inb(0xCF8)); /* save config space enable register */ |
7804 | |
7805 | /* |
7806 | * Write bus and enable registers. |
7807 | */ |
7808 | outp(0xCFA, pciData->bus)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((pciData->bus)),((0xCFA))) : __outb(((pciData ->bus)),((0xCFA)))); |
7809 | |
7810 | /* |
7811 | * Set the function number. |
7812 | */ |
7813 | outp(0xCF8, 0x10 | (pciData->func << 1))((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((0x10 | (pciData->func << 1))),((0xCF8) )) : __outb(((0x10 | (pciData->func << 1))),((0xCF8) ))); |
7814 | |
7815 | /* |
7816 | * Write the configuration space type 2 locations. |
7817 | */ |
7818 | outp(0xC000 | ((pciData->slot << 8) + pciData->offset), byte_data)((__builtin_constant_p(((0xC000 | ((pciData->slot << 8) + pciData->offset)))) && ((0xC000 | ((pciData-> slot << 8) + pciData->offset))) < 256) ? __outbc( ((byte_data)),((0xC000 | ((pciData->slot << 8) + pciData ->offset)))) : __outb(((byte_data)),((0xC000 | ((pciData-> slot << 8) + pciData->offset))))); |
7819 | |
7820 | /* |
7821 | * Restore registers. |
7822 | */ |
7823 | outp(0xCF8, t2CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outbc(((t2CF8)),((0xCF8))) : __outb(((t2CF8)),((0xCF8)) )); /* restore the enable register */ |
7824 | outp(0xCFA, t2CFA)((__builtin_constant_p(((0xCFA))) && ((0xCFA)) < 256 ) ? __outbc(((t2CFA)),((0xCFA))) : __outb(((t2CFA)),((0xCFA)) )); /* restore PCI bus register */ |
7825 | } else { |
7826 | |
7827 | /* |
7828 | * Type 1 or 3 configuration mechanism. |
7829 | * |
7830 | * Save the CONFIG_ADDRESS and CONFIG_DATA register values. |
7831 | */ |
7832 | t1CF8 = inpl(0xCF8)((__builtin_constant_p((0xCF8)) && (0xCF8) < 256) ? __inlc(0xCF8) : __inl(0xCF8)); |
7833 | t1CFC = inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)); |
7834 | |
7835 | /* |
7836 | * enable <31>, bus = <23:16>, slot = <15:11>, func = <10:8>, |
7837 | * reg = <7:2> |
7838 | */ |
7839 | address = (ulong) ((lbus << 16) | (lslot << 11) | (lfunc << 8) | |
7840 | (pciData->offset & 0xFC) | 0x80000000L); |
7841 | /* |
7842 | * Write out address to CONFIG_ADDRESS. |
7843 | */ |
7844 | outpl(0xCF8, address)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((address)),((0xCF8))) : __outl(((address)),((0xCF8 )))); |
7845 | |
7846 | /* |
7847 | * Write double word to CONFIG_DATA preserving the bytes |
7848 | * in the double not written. |
7849 | */ |
7850 | tmpl = inpl(0xCFC)((__builtin_constant_p((0xCFC)) && (0xCFC) < 256) ? __inlc(0xCFC) : __inl(0xCFC)) & ~(0xFF << ((pciData->offset & 3) * 8)); |
7851 | outpl(0xCFC, tmpl | (byte_data << ((pciData->offset & 3) * 8)))((__builtin_constant_p(((0xCFC))) && ((0xCFC)) < 256 ) ? __outlc(((tmpl | (byte_data << ((pciData->offset & 3) * 8)))),((0xCFC))) : __outl(((tmpl | (byte_data << ((pciData->offset & 3) * 8)))),((0xCFC)))); |
7852 | |
7853 | /* |
7854 | * Restore registers. |
7855 | */ |
7856 | outpl(0xCF8, t1CF8)((__builtin_constant_p(((0xCF8))) && ((0xCF8)) < 256 ) ? __outlc(((t1CF8)),((0xCF8))) : __outl(((t1CF8)),((0xCF8)) )); |
7857 | outpl(0xCFC, t1CFC)((__builtin_constant_p(((0xCFC))) && ((0xCFC)) < 256 ) ? __outlc(((t1CFC)),((0xCFC))) : __outl(((t1CFC)),((0xCFC)) )); |
7858 | } |
7859 | ASC_DBG(4, "asc_put_cfg_byte: end\n"); |
7860 | } |
7861 | #endif /* ASC_CONFIG_PCI */ |
7862 | #endif /* version < v2.1.93 */ |
7863 | |
7864 | /* |
7865 | * Add a 'REQP' to the end of specified queue. Set 'tidmask' |
7866 | * to indicate a command is queued for the device. |
7867 | * |
7868 | * 'flag' may be either ASC_FRONT or ASC_BACK. |
7869 | * |
7870 | * 'REQPNEXT(reqp)' returns reqp's next pointer. |
7871 | */ |
7872 | STATICstatic void |
7873 | asc_enqueue(asc_queue_t *ascq, REQP reqp, int flag) |
7874 | { |
7875 | int tid; |
7876 | |
7877 | ASC_DBG3(3, "asc_enqueue: ascq %x, reqp %x, flag %d\n", |
7878 | (unsigned) ascq, (unsigned) reqp, flag); |
7879 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7879); } }; |
7880 | ASC_ASSERT(reqp != NULL){ if (!(reqp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7880); } }; |
7881 | ASC_ASSERT(flag == ASC_FRONT || flag == ASC_BACK){ if (!(flag == 1 || flag == 2)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7881); } }; |
7882 | tid = REQPTID(reqp)((reqp)->target); |
7883 | ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID){ if (!(tid >= 0 && tid <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7883); } }; |
7884 | if (flag == ASC_FRONT1) { |
7885 | REQPNEXT(reqp)((reqp)->host_scribble) = (unsigned char *) ascq->q_first[tid]; |
7886 | ascq->q_first[tid] = reqp; |
7887 | /* If the queue was empty, set the last pointer. */ |
7888 | if (ascq->q_last[tid] == NULL((void *) 0)) { |
7889 | ascq->q_last[tid] = reqp; |
7890 | } |
7891 | } else { /* ASC_BACK */ |
7892 | if (ascq->q_last[tid] != NULL((void *) 0)) { |
7893 | REQPNEXT(ascq->q_last[tid])((ascq->q_last[tid])->host_scribble) = (unsigned char *) reqp; |
7894 | } |
7895 | ascq->q_last[tid] = reqp; |
7896 | REQPNEXT(reqp)((reqp)->host_scribble) = NULL((void *) 0); |
7897 | /* If the queue was empty, set the first pointer. */ |
7898 | if (ascq->q_first[tid] == NULL((void *) 0)) { |
7899 | ascq->q_first[tid] = reqp; |
7900 | } |
7901 | } |
7902 | /* The queue has at least one entry, set its bit. */ |
7903 | ascq->q_tidmask |= ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)); |
7904 | #ifdef ADVANSYS_STATS |
7905 | /* Maintain request queue statistics. */ |
7906 | ascq->q_tot_cnt[tid]++; |
7907 | ascq->q_cur_cnt[tid]++; |
7908 | if (ascq->q_cur_cnt[tid] > ascq->q_max_cnt[tid]) { |
7909 | ascq->q_max_cnt[tid] = ascq->q_cur_cnt[tid]; |
7910 | ASC_DBG2(2, "asc_enqueue: new q_max_cnt[%d] %d\n", |
7911 | tid, ascq->q_max_cnt[tid]); |
7912 | } |
7913 | REQPTIME(reqp)((reqp)->SCp.this_residual) = REQTIMESTAMP()(jiffies); |
7914 | #endif /* ADVANSYS_STATS */ |
7915 | ASC_DBG1(3, "asc_enqueue: reqp %x\n", (unsigned) reqp); |
7916 | return; |
7917 | } |
7918 | |
7919 | /* |
7920 | * Return first queued 'REQP' on the specified queue for |
7921 | * the specified target device. Clear the 'tidmask' bit for |
7922 | * the device if no more commands are left queued for it. |
7923 | * |
7924 | * 'REQPNEXT(reqp)' returns reqp's next pointer. |
7925 | */ |
7926 | STATICstatic REQP |
7927 | asc_dequeue(asc_queue_t *ascq, int tid) |
7928 | { |
7929 | REQP reqp; |
7930 | |
7931 | ASC_DBG2(3, "asc_dequeue: ascq %x, tid %d\n", (unsigned) ascq, tid); |
7932 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7932); } }; |
7933 | ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID){ if (!(tid >= 0 && tid <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7933); } }; |
7934 | if ((reqp = ascq->q_first[tid]) != NULL((void *) 0)) { |
7935 | ASC_ASSERT(ascq->q_tidmask & ADV_TID_TO_TIDMASK(tid)){ if (!(ascq->q_tidmask & (0x01 << ((tid) & 15 )))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 7935); } }; |
7936 | ascq->q_first[tid] = (REQP) REQPNEXT(reqp)((reqp)->host_scribble); |
7937 | /* If the queue is empty, clear its bit and the last pointer. */ |
7938 | if (ascq->q_first[tid] == NULL((void *) 0)) { |
7939 | ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)); |
7940 | ASC_ASSERT(ascq->q_last[tid] == reqp){ if (!(ascq->q_last[tid] == reqp)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7940); } }; |
7941 | ascq->q_last[tid] = NULL((void *) 0); |
7942 | } |
7943 | #ifdef ADVANSYS_STATS |
7944 | /* Maintain request queue statistics. */ |
7945 | ascq->q_cur_cnt[tid]--; |
7946 | ASC_ASSERT(ascq->q_cur_cnt[tid] >= 0){ if (!(ascq->q_cur_cnt[tid] >= 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7946); } }; |
7947 | REQTIMESTAT("asc_dequeue", ascq, reqp, tid){ if (((reqp)->SCp.this_residual) <= (jiffies)) { ((reqp )->SCp.this_residual) = (jiffies) - ((reqp)->SCp.this_residual ); } else { { if (!(((reqp)->SCp.this_residual) <= (jiffies ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 7947); } }; ((reqp)->SCp.this_residual) = 0; } if (((ascq )->q_tot_cnt[tid] == 1) || (((reqp)->SCp.this_residual) < (ascq)->q_min_tim[tid])) { (ascq)->q_min_tim[tid] = ((reqp)->SCp.this_residual); ; } if (((reqp)->SCp.this_residual ) > (ascq)->q_max_tim[tid]) { (ascq)->q_max_tim[tid] = ((reqp)->SCp.this_residual); ; } (ascq)->q_tot_tim[tid ] += ((reqp)->SCp.this_residual); ((reqp)->SCp.this_residual ) = 0; }; |
7948 | #endif /* ADVANSYS_STATS */ |
7949 | } |
7950 | ASC_DBG1(3, "asc_dequeue: reqp %x\n", (unsigned) reqp); |
7951 | return reqp; |
7952 | } |
7953 | |
7954 | /* |
7955 | * Return a pointer to a singly linked list of all the requests queued |
7956 | * for 'tid' on the 'asc_queue_t' pointed to by 'ascq'. |
7957 | * |
7958 | * If 'lastpp' is not NULL, '*lastpp' will be set to point to the |
7959 | * the last request returned in the singly linked list. |
7960 | * |
7961 | * 'tid' should either be a valid target id or if it is ASC_TID_ALL, |
7962 | * then all queued requests are concatenated into one list and |
7963 | * returned. |
7964 | * |
7965 | * Note: If 'lastpp' is used to append a new list to the end of |
7966 | * an old list, only change the old list last pointer if '*lastpp' |
7967 | * (or the function return value) is not NULL, i.e. use a temporary |
7968 | * variable for 'lastpp' and check its value after the function return |
7969 | * before assigning it to the list last pointer. |
7970 | * |
7971 | * Unfortunately collecting queuing time statistics adds overhead to |
7972 | * the function that isn't inherent to the function's algorithm. |
7973 | */ |
7974 | STATICstatic REQP |
7975 | asc_dequeue_list(asc_queue_t *ascq, REQP *lastpp, int tid) |
7976 | { |
7977 | REQP firstp, lastp; |
7978 | int i; |
7979 | |
7980 | ASC_DBG2(3, "asc_dequeue_list: ascq %x, tid %d\n", (unsigned) ascq, tid); |
7981 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 7981); } }; |
7982 | ASC_ASSERT((tid == ASC_TID_ALL) || (tid >= 0 && tid <= ADV_MAX_TID)){ if (!((tid == (-1)) || (tid >= 0 && tid <= 15 ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 7982); } }; |
7983 | |
7984 | /* |
7985 | * If 'tid' is not ASC_TID_ALL, return requests only for |
7986 | * the specified 'tid'. If 'tid' is ASC_TID_ALL, return all |
7987 | * requests for all tids. |
7988 | */ |
7989 | if (tid != ASC_TID_ALL(-1)) { |
7990 | /* Return all requests for the specified 'tid'. */ |
7991 | if ((ascq->q_tidmask & ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15))) == 0) { |
7992 | /* List is empty; Set first and last return pointers to NULL. */ |
7993 | firstp = lastp = NULL((void *) 0); |
7994 | } else { |
7995 | firstp = ascq->q_first[tid]; |
7996 | lastp = ascq->q_last[tid]; |
7997 | ascq->q_first[tid] = ascq->q_last[tid] = NULL((void *) 0); |
7998 | ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)); |
7999 | #ifdef ADVANSYS_STATS |
8000 | { |
8001 | REQP reqp; |
8002 | ascq->q_cur_cnt[tid] = 0; |
8003 | for (reqp = firstp; reqp; reqp = (REQP) REQPNEXT(reqp)((reqp)->host_scribble)) { |
8004 | REQTIMESTAT("asc_dequeue_list", ascq, reqp, tid){ if (((reqp)->SCp.this_residual) <= (jiffies)) { ((reqp )->SCp.this_residual) = (jiffies) - ((reqp)->SCp.this_residual ); } else { { if (!(((reqp)->SCp.this_residual) <= (jiffies ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 8004); } }; ((reqp)->SCp.this_residual) = 0; } if (((ascq )->q_tot_cnt[tid] == 1) || (((reqp)->SCp.this_residual) < (ascq)->q_min_tim[tid])) { (ascq)->q_min_tim[tid] = ((reqp)->SCp.this_residual); ; } if (((reqp)->SCp.this_residual ) > (ascq)->q_max_tim[tid]) { (ascq)->q_max_tim[tid] = ((reqp)->SCp.this_residual); ; } (ascq)->q_tot_tim[tid ] += ((reqp)->SCp.this_residual); ((reqp)->SCp.this_residual ) = 0; }; |
8005 | } |
8006 | } |
8007 | #endif /* ADVANSYS_STATS */ |
8008 | } |
8009 | } else { |
8010 | /* Return all requests for all tids. */ |
8011 | firstp = lastp = NULL((void *) 0); |
8012 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8013 | if (ascq->q_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) { |
8014 | if (firstp == NULL((void *) 0)) { |
8015 | firstp = ascq->q_first[i]; |
8016 | lastp = ascq->q_last[i]; |
8017 | } else { |
8018 | ASC_ASSERT(lastp != NULL){ if (!(lastp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8018); } }; |
8019 | REQPNEXT(lastp)((lastp)->host_scribble) = (unsigned char *) ascq->q_first[i]; |
8020 | lastp = ascq->q_last[i]; |
8021 | } |
8022 | ascq->q_first[i] = ascq->q_last[i] = NULL((void *) 0); |
8023 | ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15)); |
8024 | #ifdef ADVANSYS_STATS |
8025 | ascq->q_cur_cnt[i] = 0; |
8026 | #endif /* ADVANSYS_STATS */ |
8027 | } |
8028 | } |
8029 | #ifdef ADVANSYS_STATS |
8030 | { |
8031 | REQP reqp; |
8032 | for (reqp = firstp; reqp; reqp = (REQP) REQPNEXT(reqp)((reqp)->host_scribble)) { |
8033 | REQTIMESTAT("asc_dequeue_list", ascq, reqp, reqp->target){ if (((reqp)->SCp.this_residual) <= (jiffies)) { ((reqp )->SCp.this_residual) = (jiffies) - ((reqp)->SCp.this_residual ); } else { { if (!(((reqp)->SCp.this_residual) <= (jiffies ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 8033); } }; ((reqp)->SCp.this_residual) = 0; } if (((ascq )->q_tot_cnt[reqp->target] == 1) || (((reqp)->SCp.this_residual ) < (ascq)->q_min_tim[reqp->target])) { (ascq)->q_min_tim [reqp->target] = ((reqp)->SCp.this_residual); ; } if (( (reqp)->SCp.this_residual) > (ascq)->q_max_tim[reqp-> target]) { (ascq)->q_max_tim[reqp->target] = ((reqp)-> SCp.this_residual); ; } (ascq)->q_tot_tim[reqp->target] += ((reqp)->SCp.this_residual); ((reqp)->SCp.this_residual ) = 0; }; |
8034 | } |
8035 | } |
8036 | #endif /* ADVANSYS_STATS */ |
8037 | } |
8038 | if (lastpp) { |
8039 | *lastpp = lastp; |
8040 | } |
8041 | ASC_DBG1(3, "asc_dequeue_list: firstp %x\n", (unsigned) firstp); |
8042 | return firstp; |
8043 | } |
8044 | |
8045 | /* |
8046 | * Remove the specified 'REQP' from the specified queue for |
8047 | * the specified target device. Clear the 'tidmask' bit for the |
8048 | * device if no more commands are left queued for it. |
8049 | * |
8050 | * 'REQPNEXT(reqp)' returns reqp's the next pointer. |
8051 | * |
8052 | * Return ASC_TRUE if the command was found and removed, |
8053 | * otherwise return ASC_FALSE. |
8054 | */ |
8055 | STATICstatic int |
8056 | asc_rmqueue(asc_queue_t *ascq, REQP reqp) |
8057 | { |
8058 | REQP currp, prevp; |
8059 | int tid; |
8060 | int ret = ASC_FALSE0; |
8061 | |
8062 | ASC_DBG2(3, "asc_rmqueue: ascq %x, reqp %x\n", |
8063 | (unsigned) ascq, (unsigned) reqp); |
8064 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8064); } }; |
8065 | ASC_ASSERT(reqp != NULL){ if (!(reqp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8065); } }; |
8066 | |
8067 | tid = REQPTID(reqp)((reqp)->target); |
8068 | ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID){ if (!(tid >= 0 && tid <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8068); } }; |
8069 | |
8070 | /* |
8071 | * Handle the common case of 'reqp' being the first |
8072 | * entry on the queue. |
8073 | */ |
8074 | if (reqp == ascq->q_first[tid]) { |
8075 | ret = ASC_TRUE1; |
8076 | ascq->q_first[tid] = (REQP) REQPNEXT(reqp)((reqp)->host_scribble); |
8077 | /* If the queue is now empty, clear its bit and the last pointer. */ |
8078 | if (ascq->q_first[tid] == NULL((void *) 0)) { |
8079 | ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)); |
8080 | ASC_ASSERT(ascq->q_last[tid] == reqp){ if (!(ascq->q_last[tid] == reqp)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8080); } }; |
8081 | ascq->q_last[tid] = NULL((void *) 0); |
8082 | } |
8083 | } else if (ascq->q_first[tid] != NULL((void *) 0)) { |
8084 | ASC_ASSERT(ascq->q_last[tid] != NULL){ if (!(ascq->q_last[tid] != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8084); } }; |
8085 | /* |
8086 | * Because the case of 'reqp' being the first entry has been |
8087 | * handled above and it is known the queue is not empty, if |
8088 | * 'reqp' is found on the queue it is guaranteed the queue will |
8089 | * not become empty and that 'q_first[tid]' will not be changed. |
8090 | * |
8091 | * Set 'prevp' to the first entry, 'currp' to the second entry, |
8092 | * and search for 'reqp'. |
8093 | */ |
8094 | for (prevp = ascq->q_first[tid], currp = (REQP) REQPNEXT(prevp)((prevp)->host_scribble); |
8095 | currp; prevp = currp, currp = (REQP) REQPNEXT(currp)((currp)->host_scribble)) { |
8096 | if (currp == reqp) { |
8097 | ret = ASC_TRUE1; |
8098 | REQPNEXT(prevp)((prevp)->host_scribble) = REQPNEXT(currp)((currp)->host_scribble); |
8099 | REQPNEXT(reqp)((reqp)->host_scribble) = NULL((void *) 0); |
8100 | if (ascq->q_last[tid] == reqp) { |
8101 | ascq->q_last[tid] = prevp; |
8102 | } |
8103 | break; |
8104 | } |
8105 | } |
8106 | } |
8107 | #ifdef ADVANSYS_STATS |
8108 | /* Maintain request queue statistics. */ |
8109 | if (ret == ASC_TRUE1) { |
8110 | ascq->q_cur_cnt[tid]--; |
8111 | REQTIMESTAT("asc_rmqueue", ascq, reqp, tid){ if (((reqp)->SCp.this_residual) <= (jiffies)) { ((reqp )->SCp.this_residual) = (jiffies) - ((reqp)->SCp.this_residual ); } else { { if (!(((reqp)->SCp.this_residual) <= (jiffies ))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 8111); } }; ((reqp)->SCp.this_residual) = 0; } if (((ascq )->q_tot_cnt[tid] == 1) || (((reqp)->SCp.this_residual) < (ascq)->q_min_tim[tid])) { (ascq)->q_min_tim[tid] = ((reqp)->SCp.this_residual); ; } if (((reqp)->SCp.this_residual ) > (ascq)->q_max_tim[tid]) { (ascq)->q_max_tim[tid] = ((reqp)->SCp.this_residual); ; } (ascq)->q_tot_tim[tid ] += ((reqp)->SCp.this_residual); ((reqp)->SCp.this_residual ) = 0; }; |
8112 | } |
8113 | ASC_ASSERT(ascq->q_cur_cnt[tid] >= 0){ if (!(ascq->q_cur_cnt[tid] >= 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8113); } }; |
8114 | #endif /* ADVANSYS_STATS */ |
8115 | ASC_DBG2(3, "asc_rmqueue: reqp %x, ret %d\n", (unsigned) reqp, ret); |
8116 | return ret; |
8117 | } |
8118 | |
8119 | /* |
8120 | * If the specified 'REQP' is queued on the specified queue for |
8121 | * the specified target device, return ASC_TRUE. |
8122 | */ |
8123 | STATICstatic int |
8124 | asc_isqueued(asc_queue_t *ascq, REQP reqp) |
8125 | { |
8126 | REQP treqp; |
8127 | int tid; |
8128 | int ret = ASC_FALSE0; |
8129 | |
8130 | ASC_DBG2(3, "asc_isqueued: ascq %x, reqp %x\n", |
8131 | (unsigned) ascq, (unsigned) reqp); |
8132 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8132); } }; |
8133 | ASC_ASSERT(reqp != NULL){ if (!(reqp != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8133); } }; |
8134 | |
8135 | tid = REQPTID(reqp)((reqp)->target); |
8136 | ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID){ if (!(tid >= 0 && tid <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8136); } }; |
8137 | |
8138 | for (treqp = ascq->q_first[tid]; treqp; treqp = (REQP) REQPNEXT(treqp)((treqp)->host_scribble)) { |
8139 | ASC_ASSERT(ascq->q_tidmask & ADV_TID_TO_TIDMASK(tid)){ if (!(ascq->q_tidmask & (0x01 << ((tid) & 15 )))) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 8139); } }; |
8140 | if (treqp == reqp) { |
8141 | ret = ASC_TRUE1; |
8142 | break; |
8143 | } |
8144 | } |
8145 | ASC_DBG1(3, "asc_isqueued: ret %x\n", ret); |
8146 | return ret; |
8147 | } |
8148 | |
8149 | /* |
8150 | * Execute as many queued requests as possible for the specified queue. |
8151 | * |
8152 | * Calls asc_execute_scsi_cmnd() to execute a REQP/Scsi_Cmnd. |
8153 | */ |
8154 | STATICstatic void |
8155 | asc_execute_queue(asc_queue_t *ascq) |
8156 | { |
8157 | ADV_SCSI_BIT_ID_TYPEushort scan_tidmask; |
8158 | REQP reqp; |
8159 | int i; |
8160 | |
8161 | ASC_DBG1(1, "asc_execute_queue: ascq %x\n", (unsigned) ascq); |
8162 | ASC_ASSERT(interrupts_enabled() == ASC_FALSE){ if (!(interrupts_enabled() == 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 8162); } }; |
8163 | /* |
8164 | * Execute queued commands for devices attached to |
8165 | * the current board in round-robin fashion. |
8166 | */ |
8167 | scan_tidmask = ascq->q_tidmask; |
8168 | do { |
8169 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8170 | if (scan_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) { |
8171 | if ((reqp = asc_dequeue(ascq, i)) == NULL((void *) 0)) { |
8172 | scan_tidmask &= ~ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15)); |
8173 | } else if (asc_execute_scsi_cmnd((Scsi_Cmnd *) reqp) |
8174 | == ASC_BUSY0) { |
8175 | scan_tidmask &= ~ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15)); |
8176 | /* Put the request back at front of the list. */ |
8177 | asc_enqueue(ascq, reqp, ASC_FRONT1); |
8178 | } |
8179 | } |
8180 | } |
8181 | } while (scan_tidmask); |
8182 | return; |
8183 | } |
8184 | |
8185 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
8186 | /* |
8187 | * asc_prt_board_devices() |
8188 | * |
8189 | * Print driver information for devices attached to the board. |
8190 | * |
8191 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8192 | * cf. asc_prt_line(). |
8193 | * |
8194 | * Return the number of characters copied into 'cp'. No more than |
8195 | * 'cplen' characters will be copied to 'cp'. |
8196 | */ |
8197 | STATICstatic int |
8198 | asc_prt_board_devices(struct Scsi_Host *shp, char *cp, int cplen) |
8199 | { |
8200 | asc_board_t *boardp; |
8201 | int leftlen; |
8202 | int totlen; |
8203 | int len; |
8204 | int chip_scsi_id; |
8205 | int i; |
8206 | |
8207 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8208 | leftlen = cplen; |
8209 | totlen = len = 0; |
8210 | |
8211 | len = asc_prt_line(cp, leftlen, |
8212 | "\nDevice Information for AdvanSys SCSI Host %d:\n", shp->host_no); |
8213 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8214 | |
8215 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
8216 | chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; |
8217 | } else { |
8218 | chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; |
8219 | } |
8220 | |
8221 | len = asc_prt_line(cp, leftlen, "Target IDs Detected:"); |
8222 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8223 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8224 | if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) { |
8225 | len = asc_prt_line(cp, leftlen, " %X,", i); |
8226 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8227 | } |
8228 | } |
8229 | len = asc_prt_line(cp, leftlen, " (%X=Host Adapter)\n", chip_scsi_id); |
8230 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8231 | |
8232 | return totlen; |
8233 | } |
8234 | |
8235 | /* |
8236 | * Display Wide Board BIOS Information. |
8237 | */ |
8238 | STATICstatic int |
8239 | asc_prt_adv_bios(struct Scsi_Host *shp, char *cp, int cplen) |
8240 | { |
8241 | asc_board_t *boardp; |
8242 | int leftlen; |
8243 | int totlen; |
8244 | int len; |
8245 | int upgrade = ASC_FALSE0; |
8246 | ushort major, minor, letter; |
8247 | |
8248 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8249 | leftlen = cplen; |
8250 | totlen = len = 0; |
8251 | |
8252 | len = asc_prt_line(cp, leftlen, "\nROM BIOS Version: "); |
8253 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8254 | |
8255 | /* |
8256 | * If the BIOS saved a valid signature, then fill in |
8257 | * the BIOS code segment base address. |
8258 | */ |
8259 | if (boardp->bios_signature != 0x55AA) { |
8260 | len = asc_prt_line(cp, leftlen, "Pre-3.1\n"); |
8261 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8262 | upgrade = ASC_TRUE1; |
8263 | } else { |
8264 | major = (boardp->bios_version >> 12) & 0xF; |
8265 | minor = (boardp->bios_version >> 8) & 0xF; |
8266 | letter = (boardp->bios_version & 0xFF); |
8267 | |
8268 | len = asc_prt_line(cp, leftlen, "%d.%d%c\n", |
8269 | major, minor, letter >= 26 ? '?' : letter + 'A'); |
8270 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8271 | |
8272 | /* Current available ROM BIOS release is 3.1C. */ |
8273 | if (major < 3 || (major <= 3 && minor < 1) || |
8274 | (major <= 3 && minor <= 1 && letter < ('C'- 'A'))) { |
8275 | upgrade = ASC_TRUE1; |
8276 | } |
8277 | } |
8278 | if (upgrade == ASC_TRUE1) { |
8279 | len = asc_prt_line(cp, leftlen, |
8280 | "Newer version of ROM BIOS available: ftp://ftp.advansys.com/pub\n"); |
8281 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8282 | } |
8283 | |
8284 | return totlen; |
8285 | } |
8286 | |
8287 | /* |
8288 | * Add serial number to information bar if signature AAh |
8289 | * is found in at bit 15-9 (7 bits) of word 1. |
8290 | * |
8291 | * Serial Number consists fo 12 alpha-numeric digits. |
8292 | * |
8293 | * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits) |
8294 | * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits) |
8295 | * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits) |
8296 | * 5 - Product revision (A-J) Word0: " " |
8297 | * |
8298 | * Signature Word1: 15-9 (7 bits) |
8299 | * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit) |
8300 | * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits) |
8301 | * |
8302 | * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits) |
8303 | * |
8304 | * Note 1: Only production cards will have a serial number. |
8305 | * |
8306 | * Note 2: Signature is most significant 7 bits (0xFE). |
8307 | * |
8308 | * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE. |
8309 | */ |
8310 | STATICstatic int |
8311 | asc_get_eeprom_string(ushort *serialnum, uchar *cp) |
8312 | { |
8313 | ushort w, num; |
8314 | |
8315 | if ((serialnum[1] & 0xFE00) != ((ushort) 0xAA << 8)) { |
8316 | return ASC_FALSE0; |
8317 | } else { |
8318 | /* |
8319 | * First word - 6 digits. |
8320 | */ |
8321 | w = serialnum[0]; |
8322 | |
8323 | /* Product type - 1st digit. */ |
8324 | if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') { |
8325 | /* Product type is P=Prototype */ |
8326 | *cp += 0x8; |
8327 | } |
8328 | cp++; |
8329 | |
8330 | /* Manufacturing location - 2nd digit. */ |
8331 | *cp++ = 'A' + ((w & 0x1C00) >> 10); |
8332 | |
8333 | /* Product ID - 3rd, 4th digits. */ |
8334 | num = w & 0x3FF; |
8335 | *cp++ = '0' + (num / 100); |
8336 | num %= 100; |
8337 | *cp++ = '0' + (num / 10); |
8338 | |
8339 | /* Product revision - 5th digit. */ |
8340 | *cp++ = 'A' + (num % 10); |
8341 | |
8342 | /* |
8343 | * Second word |
8344 | */ |
8345 | w = serialnum[1]; |
8346 | |
8347 | /* |
8348 | * Year - 6th digit. |
8349 | * |
8350 | * If bit 15 of third word is set, then the |
8351 | * last digit of the year is greater than 7. |
8352 | */ |
8353 | if (serialnum[2] & 0x8000) { |
8354 | *cp++ = '8' + ((w & 0x1C0) >> 6); |
8355 | } else { |
8356 | *cp++ = '0' + ((w & 0x1C0) >> 6); |
8357 | } |
8358 | |
8359 | /* Week of year - 7th, 8th digits. */ |
8360 | num = w & 0x003F; |
8361 | *cp++ = '0' + num / 10; |
8362 | num %= 10; |
8363 | *cp++ = '0' + num; |
8364 | |
8365 | /* |
8366 | * Third word |
8367 | */ |
8368 | w = serialnum[2] & 0x7FFF; |
8369 | |
8370 | /* Serial number - 9th digit. */ |
8371 | *cp++ = 'A' + (w / 1000); |
8372 | |
8373 | /* 10th, 11th, 12th digits. */ |
8374 | num = w % 1000; |
8375 | *cp++ = '0' + num / 100; |
8376 | num %= 100; |
8377 | *cp++ = '0' + num / 10; |
8378 | num %= 10; |
8379 | *cp++ = '0' + num; |
8380 | |
8381 | *cp = '\0'; /* Null Terminate the string. */ |
8382 | return ASC_TRUE1; |
8383 | } |
8384 | } |
8385 | |
8386 | /* |
8387 | * asc_prt_asc_board_eeprom() |
8388 | * |
8389 | * Print board EEPROM configuration. |
8390 | * |
8391 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8392 | * cf. asc_prt_line(). |
8393 | * |
8394 | * Return the number of characters copied into 'cp'. No more than |
8395 | * 'cplen' characters will be copied to 'cp'. |
8396 | */ |
8397 | STATICstatic int |
8398 | asc_prt_asc_board_eeprom(struct Scsi_Host *shp, char *cp, int cplen) |
8399 | { |
8400 | asc_board_t *boardp; |
8401 | ASC_DVC_VAR *asc_dvc_varp; |
8402 | int leftlen; |
8403 | int totlen; |
8404 | int len; |
8405 | ASCEEP_CONFIG *ep; |
8406 | int i; |
8407 | int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 }; |
8408 | uchar serialstr[13]; |
8409 | |
8410 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8411 | asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; |
8412 | ep = &boardp->eep_config.asc_eep; |
8413 | |
8414 | leftlen = cplen; |
8415 | totlen = len = 0; |
8416 | |
8417 | len = asc_prt_line(cp, leftlen, |
8418 | "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", shp->host_no); |
8419 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8420 | |
8421 | if (asc_get_eeprom_string((ushort *) &ep->adapter_info[0], serialstr) == |
8422 | ASC_TRUE1) { |
8423 | len = asc_prt_line(cp, leftlen, " Serial Number: %s\n", serialstr); |
8424 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8425 | } else { |
8426 | if (ep->adapter_info[5] == 0xBB) { |
8427 | len = asc_prt_line(cp, leftlen, |
8428 | " Default Settings Used for EEPROM-less Adapter.\n"); |
8429 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8430 | } else { |
8431 | len = asc_prt_line(cp, leftlen, |
8432 | " Serial Number Signature Not Present.\n"); |
8433 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8434 | } |
8435 | } |
8436 | |
8437 | len = asc_prt_line(cp, leftlen, |
8438 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", |
8439 | ep->chip_scsi_id, ep->max_total_qng, ep->max_tag_qng); |
8440 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8441 | |
8442 | len = asc_prt_line(cp, leftlen, |
8443 | " cntl %x, no_scam %x\n", |
8444 | ep->cntl, ep->no_scam); |
8445 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8446 | |
8447 | len = asc_prt_line(cp, leftlen, |
8448 | " Target ID: "); |
8449 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8450 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8451 | len = asc_prt_line(cp, leftlen, " %d", i); |
8452 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8453 | } |
8454 | len = asc_prt_line(cp, leftlen, "\n"); |
8455 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8456 | |
8457 | len = asc_prt_line(cp, leftlen, |
8458 | " Disconnects: "); |
8459 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8460 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8461 | len = asc_prt_line(cp, leftlen, " %c", |
8462 | (ep->disc_enable & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8463 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8464 | } |
8465 | len = asc_prt_line(cp, leftlen, "\n"); |
8466 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8467 | |
8468 | len = asc_prt_line(cp, leftlen, |
8469 | " Command Queuing: "); |
8470 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8471 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8472 | len = asc_prt_line(cp, leftlen, " %c", |
8473 | (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8474 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8475 | } |
8476 | len = asc_prt_line(cp, leftlen, "\n"); |
8477 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8478 | |
8479 | len = asc_prt_line(cp, leftlen, |
8480 | " Start Motor: "); |
8481 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8482 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8483 | len = asc_prt_line(cp, leftlen, " %c", |
8484 | (ep->start_motor & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8485 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8486 | } |
8487 | len = asc_prt_line(cp, leftlen, "\n"); |
8488 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8489 | |
8490 | len = asc_prt_line(cp, leftlen, |
8491 | " Synchronous Transfer:"); |
8492 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8493 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8494 | len = asc_prt_line(cp, leftlen, " %c", |
8495 | (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8496 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8497 | } |
8498 | len = asc_prt_line(cp, leftlen, "\n"); |
8499 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8500 | |
8501 | if (asc_dvc_varp->bus_type & ASC_IS_ISA(0x0001)) { |
8502 | len = asc_prt_line(cp, leftlen, |
8503 | " Host ISA DMA speed: %d MB/S\n", |
8504 | isa_dma_speed[ep->isa_dma_speed]); |
8505 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8506 | } |
8507 | |
8508 | return totlen; |
8509 | } |
8510 | |
8511 | /* |
8512 | * asc_prt_adv_board_eeprom() |
8513 | * |
8514 | * Print board EEPROM configuration. |
8515 | * |
8516 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8517 | * cf. asc_prt_line(). |
8518 | * |
8519 | * Return the number of characters copied into 'cp'. No more than |
8520 | * 'cplen' characters will be copied to 'cp'. |
8521 | */ |
8522 | STATICstatic int |
8523 | asc_prt_adv_board_eeprom(struct Scsi_Host *shp, char *cp, int cplen) |
8524 | { |
8525 | asc_board_t *boardp; |
8526 | ADV_DVC_VAR *adv_dvc_varp; |
8527 | int leftlen; |
8528 | int totlen; |
8529 | int len; |
8530 | int i; |
8531 | char *termstr; |
8532 | uchar serialstr[13]; |
8533 | ADVEEP_CONFIG *ep; |
8534 | |
8535 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8536 | adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; |
8537 | ep = &boardp->eep_config.adv_eep; |
8538 | |
8539 | leftlen = cplen; |
8540 | totlen = len = 0; |
8541 | |
8542 | len = asc_prt_line(cp, leftlen, |
8543 | "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", shp->host_no); |
8544 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8545 | |
8546 | if (asc_get_eeprom_string(&ep->serial_number_word1, serialstr) == |
8547 | ASC_TRUE1) { |
8548 | len = asc_prt_line(cp, leftlen, " Serial Number: %s\n", serialstr); |
8549 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8550 | } else { |
8551 | len = asc_prt_line(cp, leftlen, |
8552 | " Serial Number Signature Not Present.\n"); |
8553 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8554 | } |
8555 | |
8556 | len = asc_prt_line(cp, leftlen, |
8557 | " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", |
8558 | ep->adapter_scsi_id, ep->max_host_qng, ep->max_dvc_qng); |
8559 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8560 | |
8561 | switch (ep->termination) { |
8562 | case 1: |
8563 | termstr = "Low Off/High Off"; |
8564 | break; |
8565 | case 2: |
8566 | termstr = "Low Off/High On"; |
8567 | break; |
8568 | case 3: |
8569 | termstr = "Low On/High On"; |
8570 | break; |
8571 | default: |
8572 | case 0: |
8573 | termstr = "Automatic"; |
8574 | break; |
8575 | } |
8576 | |
8577 | len = asc_prt_line(cp, leftlen, |
8578 | " termination: %u (%s), bios_ctrl: %x\n", |
8579 | ep->termination, termstr, ep->bios_ctrl); |
8580 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8581 | |
8582 | len = asc_prt_line(cp, leftlen, |
8583 | " Target ID: "); |
8584 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8585 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8586 | len = asc_prt_line(cp, leftlen, " %X", i); |
8587 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8588 | } |
8589 | len = asc_prt_line(cp, leftlen, "\n"); |
8590 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8591 | |
8592 | len = asc_prt_line(cp, leftlen, |
8593 | " Disconnects: "); |
8594 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8595 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8596 | len = asc_prt_line(cp, leftlen, " %c", |
8597 | (ep->disc_enable & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8598 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8599 | } |
8600 | len = asc_prt_line(cp, leftlen, "\n"); |
8601 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8602 | |
8603 | len = asc_prt_line(cp, leftlen, |
8604 | " Command Queuing: "); |
8605 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8606 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8607 | len = asc_prt_line(cp, leftlen, " %c", |
8608 | (ep->tagqng_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8609 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8610 | } |
8611 | len = asc_prt_line(cp, leftlen, "\n"); |
8612 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8613 | |
8614 | len = asc_prt_line(cp, leftlen, |
8615 | " Start Motor: "); |
8616 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8617 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8618 | len = asc_prt_line(cp, leftlen, " %c", |
8619 | (ep->start_motor & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8620 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8621 | } |
8622 | len = asc_prt_line(cp, leftlen, "\n"); |
8623 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8624 | |
8625 | len = asc_prt_line(cp, leftlen, |
8626 | " Synchronous Transfer:"); |
8627 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8628 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8629 | len = asc_prt_line(cp, leftlen, " %c", |
8630 | (ep->sdtr_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8631 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8632 | } |
8633 | len = asc_prt_line(cp, leftlen, "\n"); |
8634 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8635 | |
8636 | len = asc_prt_line(cp, leftlen, |
8637 | " Ultra Transfer: "); |
8638 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8639 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8640 | len = asc_prt_line(cp, leftlen, " %c", |
8641 | (ep->ultra_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8642 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8643 | } |
8644 | len = asc_prt_line(cp, leftlen, "\n"); |
8645 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8646 | |
8647 | len = asc_prt_line(cp, leftlen, |
8648 | " Wide Transfer: "); |
8649 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8650 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8651 | len = asc_prt_line(cp, leftlen, " %c", |
8652 | (ep->wdtr_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8653 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8654 | } |
8655 | len = asc_prt_line(cp, leftlen, "\n"); |
8656 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8657 | |
8658 | return totlen; |
8659 | } |
8660 | |
8661 | /* |
8662 | * asc_prt_driver_conf() |
8663 | * |
8664 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8665 | * cf. asc_prt_line(). |
8666 | * |
8667 | * Return the number of characters copied into 'cp'. No more than |
8668 | * 'cplen' characters will be copied to 'cp'. |
8669 | */ |
8670 | STATICstatic int |
8671 | asc_prt_driver_conf(struct Scsi_Host *shp, char *cp, int cplen) |
8672 | { |
8673 | asc_board_t *boardp; |
8674 | int leftlen; |
8675 | int totlen; |
8676 | int len; |
8677 | int chip_scsi_id; |
8678 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
8679 | int i; |
8680 | #endif /* version >= v1.3.89 */ |
8681 | |
8682 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8683 | |
8684 | leftlen = cplen; |
8685 | totlen = len = 0; |
8686 | |
8687 | len = asc_prt_line(cp, leftlen, |
8688 | "\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n", |
8689 | shp->host_no); |
8690 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8691 | |
8692 | len = asc_prt_line(cp, leftlen, |
8693 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
8694 | " host_busy %u, last_reset %u, max_id %u, max_lun %u\n", |
8695 | shp->host_busy, shp->last_reset, shp->max_id, shp->max_lun); |
8696 | #else /* version >= v1.3.89 */ |
8697 | " host_busy %u, last_reset %u, max_id %u, max_lun %u, max_channel %u\n", |
8698 | shp->host_busy, shp->last_reset, shp->max_id, shp->max_lun, |
8699 | shp->max_channel); |
8700 | #endif /* version >= v1.3.89 */ |
8701 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8702 | |
8703 | len = asc_prt_line(cp, leftlen, |
8704 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,57)(((1) * 65536) + ((3) * 256) + (57)) |
8705 | " can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n", |
8706 | shp->can_queue, shp->this_id, shp->sg_tablesize, shp->cmd_per_lun); |
8707 | #else /* version >= v1.3.57 */ |
8708 | " unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n", |
8709 | shp->unique_id, shp->can_queue, shp->this_id, shp->sg_tablesize, |
8710 | shp->cmd_per_lun); |
8711 | #endif /* version >= v1.3.57 */ |
8712 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8713 | |
8714 | len = asc_prt_line(cp, leftlen, |
8715 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,57)(((1) * 65536) + ((3) * 256) + (57)) |
8716 | " unchecked_isa_dma %d, loaded_as_module %d\n", |
8717 | shp->unchecked_isa_dma, shp->loaded_as_module); |
8718 | #else /* version >= v1.3.57 */ |
8719 | " unchecked_isa_dma %d, use_clustering %d, loaded_as_module %d\n", |
8720 | shp->unchecked_isa_dma, shp->use_clustering, shp->loaded_as_module); |
8721 | #endif /* version >= v1.3.57 */ |
8722 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8723 | |
8724 | len = asc_prt_line(cp, leftlen, " flags %x, last_reset %x, jiffies %x\n", |
8725 | boardp->flags, boardp->last_reset, jiffies); |
8726 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8727 | |
8728 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
8729 | chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; |
8730 | } else { |
8731 | chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; |
8732 | } |
8733 | |
8734 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
8735 | if (boardp->flags & ASC_SELECT_QUEUE_DEPTHS0x08) { |
8736 | len = asc_prt_line(cp, leftlen, " queue_depth:"); |
8737 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8738 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
8739 | if ((chip_scsi_id == i) || |
8740 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8741 | continue; |
8742 | } |
8743 | if (boardp->device[i] == NULL((void *) 0)) { |
8744 | continue; |
8745 | } |
8746 | len = asc_prt_line(cp, leftlen, " %X:%d", |
8747 | i, boardp->device[i]->queue_depth); |
8748 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8749 | } |
8750 | len = asc_prt_line(cp, leftlen, "\n"); |
8751 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8752 | } |
8753 | #endif /* version >= v1.3.89 */ |
8754 | |
8755 | #if ASC_QUEUE_FLOW_CONTROL |
8756 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
8757 | len = asc_prt_line(cp, leftlen, " queue_curr_depth:"); |
8758 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8759 | /* Use ASC_MAX_TID for Narrow Board. */ |
8760 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8761 | if ((boardp->asc_dvc_cfg.chip_scsi_id == i) || |
8762 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8763 | continue; |
8764 | } |
8765 | if (boardp->device[i] == NULL((void *) 0)) { |
8766 | continue; |
8767 | } |
8768 | len = asc_prt_line(cp, leftlen, " %d:%d", |
8769 | i, boardp->device[i]->queue_curr_depth); |
8770 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8771 | } |
8772 | len = asc_prt_line(cp, leftlen, "\n"); |
8773 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8774 | |
8775 | len = asc_prt_line(cp, leftlen, " queue_count:"); |
8776 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8777 | /* Use ASC_MAX_TID for Narrow Board. */ |
8778 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8779 | if ((boardp->asc_dvc_cfg.chip_scsi_id == i) || |
8780 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8781 | continue; |
8782 | } |
8783 | if (boardp->device[i] == NULL((void *) 0)) { |
8784 | continue; |
8785 | } |
8786 | len = asc_prt_line(cp, leftlen, " %d:%d", |
8787 | i, boardp->device[i]->queue_count); |
8788 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8789 | } |
8790 | len = asc_prt_line(cp, leftlen, "\n"); |
8791 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8792 | } |
8793 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
8794 | |
8795 | return totlen; |
8796 | } |
8797 | |
8798 | /* |
8799 | * asc_prt_asc_board_info() |
8800 | * |
8801 | * Print dynamic board configuration information. |
8802 | * |
8803 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8804 | * cf. asc_prt_line(). |
8805 | * |
8806 | * Return the number of characters copied into 'cp'. No more than |
8807 | * 'cplen' characters will be copied to 'cp'. |
8808 | */ |
8809 | STATICstatic int |
8810 | asc_prt_asc_board_info(struct Scsi_Host *shp, char *cp, int cplen) |
8811 | { |
8812 | asc_board_t *boardp; |
8813 | int leftlen; |
8814 | int totlen; |
8815 | int len; |
8816 | ASC_DVC_VAR *v; |
8817 | ASC_DVC_CFG *c; |
8818 | int i; |
8819 | |
8820 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8821 | v = &boardp->dvc_var.asc_dvc_var; |
8822 | c = &boardp->dvc_cfg.asc_dvc_cfg; |
8823 | |
8824 | leftlen = cplen; |
8825 | totlen = len = 0; |
8826 | |
8827 | len = asc_prt_line(cp, leftlen, |
8828 | "\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", |
8829 | shp->host_no); |
8830 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8831 | |
8832 | len = asc_prt_line(cp, leftlen, |
8833 | " chip_version %u, lib_version %x, lib_serial_no %u, mcode_date %x\n", |
8834 | c->chip_version, c->lib_version, c->lib_serial_no, c->mcode_date); |
8835 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8836 | |
8837 | len = asc_prt_line(cp, leftlen, |
8838 | " mcode_version %x, err_code %u\n", |
8839 | c->mcode_version, v->err_code); |
8840 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8841 | |
8842 | /* Current number of commands waiting for the host. */ |
8843 | len = asc_prt_line(cp, leftlen, |
8844 | " Total Command Pending: %d\n", v->cur_total_qng); |
8845 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8846 | |
8847 | len = asc_prt_line(cp, leftlen, |
8848 | " Command Queuing:"); |
8849 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8850 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8851 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8852 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8853 | continue; |
8854 | } |
8855 | len = asc_prt_line(cp, leftlen, " %d:%c", |
8856 | i, (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8857 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8858 | } |
8859 | len = asc_prt_line(cp, leftlen, "\n"); |
8860 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8861 | |
8862 | /* Current number of commands waiting for a device. */ |
8863 | len = asc_prt_line(cp, leftlen, |
8864 | " Command Queue Pending:"); |
8865 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8866 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8867 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8868 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8869 | continue; |
8870 | } |
8871 | len = asc_prt_line(cp, leftlen, " %d:%u", i, v->cur_dvc_qng[i]); |
8872 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8873 | } |
8874 | len = asc_prt_line(cp, leftlen, "\n"); |
8875 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8876 | |
8877 | /* Current limit on number of commands that can be sent to a device. */ |
8878 | len = asc_prt_line(cp, leftlen, |
8879 | " Command Queue Limit:"); |
8880 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8881 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8882 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8883 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8884 | continue; |
8885 | } |
8886 | len = asc_prt_line(cp, leftlen, " %d:%u", i, v->max_dvc_qng[i]); |
8887 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8888 | } |
8889 | len = asc_prt_line(cp, leftlen, "\n"); |
8890 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8891 | |
8892 | /* Indicate whether the device has returned queue full status. */ |
8893 | len = asc_prt_line(cp, leftlen, |
8894 | " Command Queue Full:"); |
8895 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8896 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8897 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8898 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8899 | continue; |
8900 | } |
8901 | if (boardp->queue_full & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) { |
8902 | len = asc_prt_line(cp, leftlen, " %d:Y-%d", |
8903 | i, boardp->queue_full_cnt[i]); |
8904 | } else { |
8905 | len = asc_prt_line(cp, leftlen, " %d:N", i); |
8906 | } |
8907 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8908 | } |
8909 | len = asc_prt_line(cp, leftlen, "\n"); |
8910 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8911 | |
8912 | len = asc_prt_line(cp, leftlen, |
8913 | " Synchronous Transfer:"); |
8914 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8915 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8916 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8917 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8918 | continue; |
8919 | } |
8920 | len = asc_prt_line(cp, leftlen, " %d:%c", |
8921 | i, (v->sdtr_done & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
8922 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8923 | } |
8924 | len = asc_prt_line(cp, leftlen, "\n"); |
8925 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8926 | |
8927 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
8928 | uchar syn_period_ix; |
8929 | |
8930 | if ((boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id == i) || |
8931 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
8932 | continue; |
8933 | } |
8934 | if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0) { |
8935 | continue; |
8936 | } |
8937 | syn_period_ix = (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - 1); |
8938 | len = asc_prt_line(cp, leftlen, " %d:", i); |
8939 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8940 | |
8941 | len = asc_prt_line(cp, leftlen, |
8942 | " Transfer Period Factor: %d (%d.%d Mhz),", |
8943 | v->sdtr_period_tbl[syn_period_ix], |
8944 | 250 / v->sdtr_period_tbl[syn_period_ix], |
8945 | ASC_TENTHS(250, v->sdtr_period_tbl[syn_period_ix])(((10 * ((250)/(v->sdtr_period_tbl[syn_period_ix]))) > ( ((250) * 10)/(v->sdtr_period_tbl[syn_period_ix]))) ? 0 : ( (((250) * 10)/(v->sdtr_period_tbl[syn_period_ix])) - (10 * ((250)/(v->sdtr_period_tbl[syn_period_ix])))))); |
8946 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8947 | |
8948 | len = asc_prt_line(cp, leftlen, " REQ/ACK Offset: %d\n", |
8949 | boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET0x0F); |
8950 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8951 | } |
8952 | |
8953 | return totlen; |
8954 | } |
8955 | |
8956 | /* |
8957 | * asc_prt_adv_board_info() |
8958 | * |
8959 | * Print dynamic board configuration information. |
8960 | * |
8961 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
8962 | * cf. asc_prt_line(). |
8963 | * |
8964 | * Return the number of characters copied into 'cp'. No more than |
8965 | * 'cplen' characters will be copied to 'cp'. |
8966 | */ |
8967 | STATICstatic int |
8968 | asc_prt_adv_board_info(struct Scsi_Host *shp, char *cp, int cplen) |
8969 | { |
8970 | asc_board_t *boardp; |
8971 | int leftlen; |
8972 | int totlen; |
8973 | int len; |
8974 | int i; |
8975 | ADV_DVC_VAR *v; |
8976 | ADV_DVC_CFG *c; |
8977 | AdvPortAddrunsigned long iop_base; |
8978 | ushort chip_scsi_id; |
8979 | ushort lramword; |
8980 | uchar lrambyte; |
8981 | ushort sdtr_able; |
8982 | ushort period; |
8983 | |
8984 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
8985 | v = &boardp->dvc_var.adv_dvc_var; |
8986 | c = &boardp->dvc_cfg.adv_dvc_cfg; |
8987 | iop_base = v->iop_base; |
8988 | chip_scsi_id = v->chip_scsi_id; |
8989 | |
8990 | leftlen = cplen; |
8991 | totlen = len = 0; |
8992 | |
8993 | len = asc_prt_line(cp, leftlen, |
8994 | "\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", |
8995 | shp->host_no); |
8996 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
8997 | |
8998 | len = asc_prt_line(cp, leftlen, |
8999 | " iop_base %lx, cable_detect: %X, err_code %u, idle_cmd_done %u\n", |
9000 | v->iop_base, |
9001 | AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1)((*(volatile unsigned short *) ((iop_base) + (0x0E)))) & CABLE_DETECT0x000F, |
9002 | v->err_code, v->idle_cmd_done); |
9003 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9004 | |
9005 | len = asc_prt_line(cp, leftlen, |
9006 | " chip_version %u, lib_version %x, mcode_date %x, mcode_version %x\n", |
9007 | c->chip_version, c->lib_version, c->mcode_date, c->mcode_version); |
9008 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9009 | |
9010 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, lramword)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00A0))); (lramword) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
9011 | len = asc_prt_line(cp, leftlen, |
9012 | " Queuing Enabled:"); |
9013 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9014 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9015 | if ((chip_scsi_id == i) || |
9016 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9017 | continue; |
9018 | } |
9019 | |
9020 | len = asc_prt_line(cp, leftlen, " %X:%c", |
9021 | i, (lramword & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
9022 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9023 | } |
9024 | len = asc_prt_line(cp, leftlen, "\n"); |
9025 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9026 | |
9027 | len = asc_prt_line(cp, leftlen, |
9028 | " Queue Limit:"); |
9029 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9030 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9031 | if ((chip_scsi_id == i) || |
9032 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9033 | continue; |
9034 | } |
9035 | |
9036 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i, lrambyte)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00D0 + i))); (lrambyte) = (*(volatile unsigned char *) ((iop_base ) + 0x06)); } while (0); |
9037 | |
9038 | len = asc_prt_line(cp, leftlen, " %X:%d", i, lrambyte); |
9039 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9040 | } |
9041 | len = asc_prt_line(cp, leftlen, "\n"); |
9042 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9043 | |
9044 | len = asc_prt_line(cp, leftlen, |
9045 | " Command Pending:"); |
9046 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9047 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9048 | if ((chip_scsi_id == i) || |
9049 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9050 | continue; |
9051 | } |
9052 | |
9053 | AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i, lrambyte)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00C0 + i))); (lrambyte) = (*(volatile unsigned char *) ((iop_base ) + 0x06)); } while (0); |
9054 | |
9055 | len = asc_prt_line(cp, leftlen, " %X:%d", i, lrambyte); |
9056 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9057 | } |
9058 | len = asc_prt_line(cp, leftlen, "\n"); |
9059 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9060 | |
9061 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, lramword)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0120))); (lramword) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
9062 | len = asc_prt_line(cp, leftlen, |
9063 | " Wide Enabled:"); |
9064 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9065 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9066 | if ((chip_scsi_id == i) || |
9067 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9068 | continue; |
9069 | } |
9070 | |
9071 | len = asc_prt_line(cp, leftlen, " %X:%c", |
9072 | i, (lramword & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
9073 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9074 | } |
9075 | len = asc_prt_line(cp, leftlen, "\n"); |
9076 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9077 | |
9078 | len = asc_prt_line(cp, leftlen, |
9079 | " Transfer Bit Width:"); |
9080 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9081 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9082 | if ((chip_scsi_id == i) || |
9083 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9084 | continue; |
9085 | } |
9086 | |
9087 | AdvReadWordLram(iop_base, ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0100 + (2 * i)))); (lramword) = (*(volatile unsigned short * ) ((iop_base) + 0x06)); } while (0) |
9088 | lramword)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0100 + (2 * i)))); (lramword) = (*(volatile unsigned short * ) ((iop_base) + 0x06)); } while (0); |
9089 | len = asc_prt_line(cp, leftlen, " %X:%d", |
9090 | i, (lramword & 0x8000) ? 16 : 8); |
9091 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9092 | } |
9093 | len = asc_prt_line(cp, leftlen, "\n"); |
9094 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9095 | |
9096 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x009E))); (sdtr_able) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
9097 | len = asc_prt_line(cp, leftlen, |
9098 | " Synchronous Enabled:"); |
9099 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9100 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9101 | if ((chip_scsi_id == i) || |
9102 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9103 | continue; |
9104 | } |
9105 | |
9106 | len = asc_prt_line(cp, leftlen, " %X:%c", |
9107 | i, (sdtr_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) ? 'Y' : 'N'); |
9108 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9109 | } |
9110 | len = asc_prt_line(cp, leftlen, "\n"); |
9111 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9112 | |
9113 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9114 | |
9115 | AdvReadWordLram(iop_base, ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0100 + (2 * i)))); (lramword) = (*(volatile unsigned short * ) ((iop_base) + 0x06)); } while (0) |
9116 | lramword)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0100 + (2 * i)))); (lramword) = (*(volatile unsigned short * ) ((iop_base) + 0x06)); } while (0); |
9117 | lramword &= ~0x8000; |
9118 | |
9119 | if ((chip_scsi_id == i) || |
9120 | ((sdtr_able & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0) || |
9121 | (lramword == 0)) { |
9122 | continue; |
9123 | } |
9124 | |
9125 | len = asc_prt_line(cp, leftlen, " %X:", i); |
9126 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9127 | |
9128 | period = (((lramword >> 8) * 25) + 50)/4; |
9129 | |
9130 | len = asc_prt_line(cp, leftlen, |
9131 | " Transfer Period Factor: %d (%d.%d Mhz),", |
9132 | period, 250/period, ASC_TENTHS(250, period)(((10 * ((250)/(period))) > (((250) * 10)/(period))) ? 0 : ((((250) * 10)/(period)) - (10 * ((250)/(period)))))); |
9133 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9134 | |
9135 | len = asc_prt_line(cp, leftlen, " REQ/ACK Offset: %d\n", |
9136 | lramword & 0x1F); |
9137 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9138 | } |
9139 | |
9140 | return totlen; |
9141 | } |
9142 | |
9143 | /* |
9144 | * asc_proc_copy() |
9145 | * |
9146 | * Copy proc information to a read buffer taking into account the current |
9147 | * read offset in the file and the remaining space in the read buffer. |
9148 | */ |
9149 | STATICstatic int |
9150 | asc_proc_copy(off_t advoffset, off_t offset, char *curbuf, int leftlen, |
9151 | char *cp, int cplen) |
9152 | { |
9153 | int cnt = 0; |
9154 | |
9155 | ASC_DBG3(2, "asc_proc_copy: offset %d, advoffset %d, cplen %d\n", |
9156 | (unsigned) offset, (unsigned) advoffset, cplen); |
9157 | if (offset <= advoffset) { |
9158 | /* Read offset below current offset, copy everything. */ |
9159 | cnt = ASC_MIN(cplen, leftlen)(((cplen) < (leftlen)) ? (cplen) : (leftlen)); |
9160 | ASC_DBG3(2, "asc_proc_copy: curbuf %x, cp %x, cnt %d\n", |
9161 | (unsigned) curbuf, (unsigned) cp, cnt); |
9162 | memcpy(curbuf, cp, cnt)(__builtin_constant_p(cnt) ? __constant_memcpy((curbuf),(cp), (cnt)) : __memcpy((curbuf),(cp),(cnt))); |
9163 | } else if (offset < advoffset + cplen) { |
9164 | /* Read offset within current range, partial copy. */ |
9165 | cnt = (advoffset + cplen) - offset; |
9166 | cp = (cp + cplen) - cnt; |
9167 | cnt = ASC_MIN(cnt, leftlen)(((cnt) < (leftlen)) ? (cnt) : (leftlen)); |
9168 | ASC_DBG3(2, "asc_proc_copy: curbuf %x, cp %x, cnt %d\n", |
9169 | (unsigned) curbuf, (unsigned) cp, cnt); |
9170 | memcpy(curbuf, cp, cnt)(__builtin_constant_p(cnt) ? __constant_memcpy((curbuf),(cp), (cnt)) : __memcpy((curbuf),(cp),(cnt))); |
9171 | } |
9172 | return cnt; |
9173 | } |
9174 | |
9175 | /* |
9176 | * asc_prt_line() |
9177 | * |
9178 | * If 'cp' is NULL print to the console, otherwise print to a buffer. |
9179 | * |
9180 | * Return 0 if printing to the console, otherwise return the number of |
9181 | * bytes written to the buffer. |
9182 | * |
9183 | * Note: If any single line is greater than ASC_PRTLINE_SIZE bytes the stack |
9184 | * will be corrupted. 's[]' is defined to be ASC_PRTLINE_SIZE bytes. |
9185 | */ |
9186 | STATICstatic int |
9187 | asc_prt_line(char *buf, int buflen, char *fmt, ...) |
9188 | { |
9189 | va_list args; |
9190 | int ret; |
9191 | char s[ASC_PRTLINE_SIZE160]; |
9192 | |
9193 | va_start(args, fmt)__builtin_va_start(args,fmt); |
9194 | ret = vsprintflinux_vsprintf(s, fmt, args); |
9195 | ASC_ASSERT(ret < ASC_PRTLINE_SIZE){ if (!(ret < 160)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 9195); } }; |
9196 | if (buf == NULL((void *) 0)) { |
9197 | (void) printk("%s", s); |
9198 | ret = 0; |
9199 | } else { |
9200 | ret = ASC_MIN(buflen, ret)(((buflen) < (ret)) ? (buflen) : (ret)); |
9201 | memcpy(buf, s, ret)(__builtin_constant_p(ret) ? __constant_memcpy((buf),(s),(ret )) : __memcpy((buf),(s),(ret))); |
9202 | } |
9203 | va_end(args)__builtin_va_end(args); |
9204 | return ret; |
9205 | } |
9206 | #endif /* version >= v1.3.0 */ |
9207 | |
9208 | |
9209 | /* |
9210 | * --- Functions Required by the Asc Library |
9211 | */ |
9212 | |
9213 | /* |
9214 | * Delay for 'n' milliseconds. Don't use the 'jiffies' |
9215 | * global variable which is incremented once every 5 ms |
9216 | * from a timer interrupt, because this function may be |
9217 | * called when interrupts are disabled. |
9218 | */ |
9219 | STATICstatic void |
9220 | DvcSleepMilliSecond(ulong n) |
9221 | { |
9222 | ulong i; |
9223 | |
9224 | ASC_DBG1(4, "DvcSleepMilliSecond: %lu\n", n); |
9225 | for (i = 0; i < n; i++) { |
9226 | udelay(1000)(__builtin_constant_p(1000) ? __const_udelay((1000) * 0x10c6ul ) : __udelay(1000)); |
9227 | } |
9228 | } |
9229 | |
9230 | STATICstatic long |
9231 | DvcEnterCritical(void) |
9232 | { |
9233 | long flags; |
9234 | |
9235 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
9236 | cli()__asm__ __volatile__ ("cli": : :"memory"); |
9237 | return flags; |
9238 | } |
9239 | |
9240 | STATICstatic void |
9241 | DvcLeaveCritical(long flags) |
9242 | { |
9243 | restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); |
9244 | } |
9245 | |
9246 | STATICstatic ulong |
9247 | DvcGetSGList(ASC_DVC_VAR *asc_dvc_sg, uchar *buf_addr, ulong buf_len, |
9248 | ASC_SG_HEAD *asc_sg_head_ptr) |
9249 | { |
9250 | ulong buf_size; |
9251 | |
9252 | buf_size = buf_len; |
9253 | asc_sg_head_ptr->entry_cnt = 1; |
9254 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
9255 | asc_sg_head_ptr->sg_list[0].addr = (ulong) buf_addr; |
9256 | #else /* version >= v2.0.0 */ |
9257 | asc_sg_head_ptr->sg_list[0].addr = virt_to_busvirt_to_phys(buf_addr); |
9258 | #endif /* version >= v2.0.0 */ |
9259 | asc_sg_head_ptr->sg_list[0].bytes = buf_size; |
9260 | return buf_size; |
9261 | } |
9262 | |
9263 | /* |
9264 | * void |
9265 | * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, ushort *outbuf, int words) |
9266 | * |
9267 | * Calling/Exit State: |
9268 | * none |
9269 | * |
9270 | * Description: |
9271 | * Output an ASC_SCSI_Q structure to the chip |
9272 | */ |
9273 | STATICstatic void |
9274 | DvcPutScsiQ(PortAddrunsigned short iop_base, ushort s_addr, ushort *outbuf, int words) |
9275 | { |
9276 | int i; |
9277 | |
9278 | ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", (uchar *) outbuf, 2 * words); |
9279 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
9280 | for (i = 0; i < words; i++, outbuf++) { |
9281 | if (i == 2 || i == 10) { |
9282 | continue; |
9283 | } |
9284 | AscSetChipLramDataNoSwap(iop_base, *outbuf)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((*outbuf)),(((iop_base)+(0x08 )))) : __outw(((*outbuf)),(((iop_base)+(0x08))))); |
9285 | } |
9286 | } |
9287 | |
9288 | /* |
9289 | * void |
9290 | * DvcGetQinfo(PortAddr iop_base, ushort s_addr, ushort *inbuf, int words) |
9291 | * |
9292 | * Calling/Exit State: |
9293 | * none |
9294 | * |
9295 | * Description: |
9296 | * Input an ASC_QDONE_INFO structure from the chip |
9297 | */ |
9298 | STATICstatic void |
9299 | DvcGetQinfo(PortAddrunsigned short iop_base, ushort s_addr, ushort *inbuf, int words) |
9300 | { |
9301 | int i; |
9302 | |
9303 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
9304 | for (i = 0; i < words; i++, inbuf++) { |
9305 | if (i == 5) { |
9306 | continue; |
9307 | } |
9308 | *inbuf = AscGetChipLramDataNoSwap(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
9309 | } |
9310 | ASC_DBG_PRT_HEX(2, "DvcGetQinfo", (uchar *) inbuf, 2 * words); |
9311 | } |
9312 | |
9313 | /* |
9314 | * void DvcOutPortWords(ushort iop_base, ushort &outbuf, int words) |
9315 | * |
9316 | * Calling/Exit State: |
9317 | * none |
9318 | * |
9319 | * Description: |
9320 | * output a buffer to an i/o port address |
9321 | */ |
9322 | STATICstatic void |
9323 | DvcOutPortWords(ushort iop_base, ushort *outbuf, int words) |
9324 | { |
9325 | int i; |
9326 | |
9327 | for (i = 0; i < words; i++, outbuf++) |
9328 | outpw(iop_base, *outbuf)((__builtin_constant_p(((iop_base))) && ((iop_base)) < 256) ? __outwc(((*outbuf)),((iop_base))) : __outw(((*outbuf) ),((iop_base)))); |
9329 | } |
9330 | |
9331 | /* |
9332 | * void DvcInPortWords(ushort iop_base, ushort &outbuf, int words) |
9333 | * |
9334 | * Calling/Exit State: |
9335 | * none |
9336 | * |
9337 | * Description: |
9338 | * input a buffer from an i/o port address |
9339 | */ |
9340 | STATICstatic void |
9341 | DvcInPortWords(ushort iop_base, ushort *inbuf, int words) |
9342 | { |
9343 | int i; |
9344 | |
9345 | for (i = 0; i < words; i++, inbuf++) |
9346 | *inbuf = inpw(iop_base)((__builtin_constant_p((iop_base)) && (iop_base) < 256) ? __inwc(iop_base) : __inw(iop_base)); |
9347 | } |
9348 | |
9349 | /* |
9350 | * void DvcOutPortDWords(PortAddr port, ulong *pdw, int dwords) |
9351 | * |
9352 | * Calling/Exit State: |
9353 | * none |
9354 | * |
9355 | * Description: |
9356 | * output a buffer of 32-bit integers to an i/o port address in |
9357 | * 16 bit integer units |
9358 | */ |
9359 | STATICstatic void |
9360 | DvcOutPortDWords(PortAddrunsigned short port, ulong *pdw, int dwords) |
9361 | { |
9362 | int i; |
9363 | int words; |
9364 | ushort *pw; |
9365 | |
9366 | pw = (ushort *) pdw; |
9367 | words = dwords << 1; |
9368 | for(i = 0; i < words; i++, pw++) { |
9369 | outpw(port, *pw)((__builtin_constant_p(((port))) && ((port)) < 256 ) ? __outwc(((*pw)),((port))) : __outw(((*pw)),((port)))); |
9370 | } |
9371 | return; |
9372 | } |
9373 | |
9374 | /* |
9375 | * Read a PCI configuration byte. |
9376 | */ |
9377 | ASC_INITFUNC(static uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9378 | STATIC ucharstatic uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9379 | DvcReadPCIConfigByte(static uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9380 | ASC_DVC_VAR asc_ptr_type *asc_dvc,static uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9381 | ushort offset)static uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9382 | )static uchar DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) |
9383 | { |
9384 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
9385 | #ifdef ASC_CONFIG_PCI |
9386 | PCI_DATA pciData; |
9387 | |
9388 | pciData.bus = ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF); |
9389 | pciData.slot = ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ); |
9390 | pciData.func = ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7); |
9391 | pciData.offset = offset; |
9392 | pciData.type = pci_scan_method; |
9393 | return asc_get_cfg_byte(&pciData); |
9394 | #else /* ASC_CONFIG_PCI */ |
9395 | return 0; |
9396 | #endif /* ASC_CONFIG_PCI */ |
9397 | #else /* version >= v2.1.93 */ |
9398 | #ifdef CONFIG_PCI1 |
9399 | uchar byte_data; |
9400 | pcibios_read_config_byte(ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF), |
9401 | PCI_DEVFN(ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ), |
9402 | ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7)), |
9403 | offset, &byte_data); |
9404 | return byte_data; |
9405 | #else /* CONFIG_PCI */ |
9406 | return 0; |
9407 | #endif /* CONFIG_PCI */ |
9408 | #endif /* version >= v2.1.93 */ |
9409 | } |
9410 | |
9411 | /* |
9412 | * Write a PCI configuration byte. |
9413 | */ |
9414 | ASC_INITFUNC(static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9415 | STATIC voidstatic void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9416 | DvcWritePCIConfigByte(static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9417 | ASC_DVC_VAR asc_ptr_type *asc_dvc,static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9418 | ushort offset,static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9419 | uchar byte_data)static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9420 | )static void DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9421 | { |
9422 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
9423 | #ifdef ASC_CONFIG_PCI |
9424 | PCI_DATA pciData; |
9425 | |
9426 | pciData.bus = ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF); |
9427 | pciData.slot = ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ); |
9428 | pciData.func = ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7); |
9429 | pciData.offset = offset; |
9430 | pciData.type = pci_scan_method; |
9431 | asc_put_cfg_byte(&pciData, byte_data); |
9432 | #endif /* ASC_CONFIG_PCI */ |
9433 | #else /* version >= v2.1.93 */ |
9434 | #ifdef CONFIG_PCI1 |
9435 | pcibios_write_config_byte(ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF), |
9436 | PCI_DEVFN(ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ), |
9437 | ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7)), |
9438 | offset, byte_data); |
9439 | #endif /* CONFIG_PCI */ |
9440 | #endif /* version >= v2.1.93 */ |
9441 | } |
9442 | |
9443 | /* |
9444 | * Return the BIOS address of the adapter at the specified |
9445 | * I/O port and with the specified bus type. |
9446 | */ |
9447 | ASC_INITFUNC(static ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9448 | STATIC ushortstatic ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9449 | AscGetChipBiosAddress(static ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9450 | PortAddr iop_base,static ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9451 | ushort bus_typestatic ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9452 | )static ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9453 | )static ushort AscGetChipBiosAddress( unsigned short iop_base, ushort bus_type) |
9454 | { |
9455 | ushort cfg_lsw ; |
9456 | ushort bios_addr ; |
9457 | |
9458 | /* |
9459 | * The PCI BIOS is re-located by the motherboard BIOS. Because |
9460 | * of this the driver can not determine where a PCI BIOS is |
9461 | * loaded and executes. |
9462 | */ |
9463 | if (bus_type & ASC_IS_PCI(0x0004)) |
9464 | { |
9465 | return(0); |
9466 | } |
9467 | |
9468 | if((bus_type & ASC_IS_EISA(0x0002)) != 0) |
9469 | { |
9470 | cfg_lsw = AscGetEisaChipCfg(iop_base) ; |
9471 | cfg_lsw &= 0x000F ; |
9472 | bios_addr = (ushort)(ASC_BIOS_MIN_ADDR0xC000 + |
9473 | (cfg_lsw * ASC_BIOS_BANK_SIZE0x0400)) ; |
9474 | return(bios_addr) ; |
9475 | }/* if */ |
9476 | |
9477 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) ; |
9478 | |
9479 | /* |
9480 | * ISA PnP uses the top bit as the 32K BIOS flag |
9481 | */ |
9482 | if (bus_type == ASC_IS_ISAPNP(0x0081)) |
9483 | { |
9484 | cfg_lsw &= 0x7FFF; |
9485 | }/* if */ |
9486 | |
9487 | bios_addr = (ushort)(((cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE0x0400) + |
9488 | ASC_BIOS_MIN_ADDR0xC000) ; |
9489 | return(bios_addr) ; |
9490 | } |
9491 | |
9492 | |
9493 | /* |
9494 | * --- Functions Required by the Adv Library |
9495 | */ |
9496 | |
9497 | /* |
9498 | * DvcGetPhyAddr() |
9499 | * |
9500 | * Return the physical address of 'vaddr' and set '*lenp' to the |
9501 | * number of physically contiguous bytes that follow 'vaddr'. |
9502 | * 'flag' indicates the type of structure whose physical address |
9503 | * is being translated. |
9504 | * |
9505 | * Note: Because Linux currently doesn't page the kernel and all |
9506 | * kernel buffers are physically contiguous, leave '*lenp' unchanged. |
9507 | */ |
9508 | ulong |
9509 | DvcGetPhyAddr(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq, |
9510 | uchar *vaddr, long *lenp, int flag) |
9511 | { |
9512 | ulong paddr; |
9513 | |
9514 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,0,0)(((2) * 65536) + ((0) * 256) + (0)) |
9515 | paddr = (ulong) vaddr; |
9516 | #else /* version >= v2.0.0 */ |
9517 | paddr = virt_to_busvirt_to_phys(vaddr); |
9518 | #endif /* version >= v2.0.0 */ |
9519 | |
9520 | ASC_DBG4(4, |
9521 | "DvcGetPhyAddr: vaddr 0x%lx, lenp 0x%lx *lenp %lu, paddr 0x%lx\n", |
9522 | (ulong) vaddr, (ulong) lenp, (ulong) *((ulong *) lenp), paddr); |
9523 | |
9524 | return paddr; |
9525 | } |
9526 | |
9527 | /* |
9528 | * Read a PCI configuration byte. |
9529 | */ |
9530 | ASC_INITFUNC(static uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9531 | STATIC ucharstatic uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9532 | DvcAdvReadPCIConfigByte(static uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9533 | ADV_DVC_VAR *asc_dvc,static uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9534 | ushort offset)static uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9535 | )static uchar DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) |
9536 | { |
9537 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
9538 | #ifdef ASC_CONFIG_PCI |
9539 | PCI_DATA pciData; |
9540 | |
9541 | pciData.bus = ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF); |
9542 | pciData.slot = ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ); |
9543 | pciData.func = ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7); |
9544 | pciData.offset = offset; |
9545 | pciData.type = pci_scan_method; |
9546 | return asc_get_cfg_byte(&pciData); |
9547 | #else /* ASC_CONFIG_PCI */ |
9548 | return 0; |
9549 | #endif /* ASC_CONFIG_PCI */ |
9550 | #else /* version >= v2.1.93 */ |
9551 | #ifdef CONFIG_PCI1 |
9552 | uchar byte_data; |
9553 | pcibios_read_config_byte(ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF), |
9554 | PCI_DEVFN(ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ), |
9555 | ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7)), |
9556 | offset, &byte_data); |
9557 | return byte_data; |
9558 | #else /* CONFIG_PCI */ |
9559 | return 0; |
9560 | #endif /* CONFIG_PCI */ |
9561 | #endif /* version >= v2.1.93 */ |
9562 | } |
9563 | |
9564 | /* |
9565 | * Write a PCI configuration byte. |
9566 | */ |
9567 | ASC_INITFUNC(static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9568 | STATIC voidstatic void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9569 | DvcAdvWritePCIConfigByte(static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9570 | ADV_DVC_VAR *asc_dvc,static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9571 | ushort offset,static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9572 | uchar byte_data)static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9573 | )static void DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) |
9574 | { |
9575 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(2,1,93)(((2) * 65536) + ((1) * 256) + (93)) |
9576 | #ifdef ASC_CONFIG_PCI |
9577 | PCI_DATA pciData; |
9578 | |
9579 | pciData.bus = ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF); |
9580 | pciData.slot = ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ); |
9581 | pciData.func = ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7); |
9582 | pciData.offset = offset; |
9583 | pciData.type = pci_scan_method; |
9584 | asc_put_cfg_byte(&pciData, byte_data); |
9585 | #endif /* ASC_CONFIG_PCI */ |
9586 | #else /* version >= v2.1.93 */ |
9587 | #ifdef CONFIG_PCI1 |
9588 | pcibios_write_config_byte(ASC_PCI_ID2BUS(asc_dvc->cfg->pci_slot_info)((asc_dvc->cfg->pci_slot_info) & 0xFF), |
9589 | PCI_DEVFN(ASC_PCI_ID2DEV(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 11) & 0x1F ), |
9590 | ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info)(((asc_dvc->cfg->pci_slot_info) >> 8) & 0x7)), |
9591 | offset, byte_data); |
9592 | #endif /* CONFIG_PCI */ |
9593 | #endif /* version >= v2.1.93 */ |
9594 | } |
9595 | |
9596 | /* |
9597 | * --- Tracing and Debugging Functions |
9598 | */ |
9599 | |
9600 | #ifdef ADVANSYS_STATS |
9601 | /* |
9602 | * asc_prt_board_stats() |
9603 | * |
9604 | * Note: no single line should be greater than ASC_PRTLINE_SIZE, |
9605 | * cf. asc_prt_line(). |
9606 | * |
9607 | * Return the number of characters copied into 'cp'. No more than |
9608 | * 'cplen' characters will be copied to 'cp'. |
9609 | */ |
9610 | STATICstatic int |
9611 | asc_prt_board_stats(struct Scsi_Host *shp, char *cp, int cplen) |
9612 | { |
9613 | int leftlen; |
9614 | int totlen; |
9615 | int len; |
9616 | struct asc_stats *s; |
9617 | int i; |
9618 | ushort chip_scsi_id; |
9619 | asc_board_t *boardp; |
9620 | asc_queue_t *active; |
9621 | asc_queue_t *waiting; |
9622 | |
9623 | leftlen = cplen; |
9624 | totlen = len = 0; |
9625 | |
9626 | boardp = ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata)); |
9627 | s = &boardp->asc_stats; |
9628 | |
9629 | len = asc_prt_line(cp, leftlen, |
9630 | "\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n", shp->host_no); |
9631 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9632 | |
9633 | len = asc_prt_line(cp, leftlen, |
9634 | " command %lu, queuecommand %lu, abort %lu, reset %lu, biosparam %lu\n", |
9635 | s->command, s->queuecommand, s->abort, s->reset, s->biosparam); |
9636 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9637 | |
9638 | len = asc_prt_line(cp, leftlen, |
9639 | " interrupt %lu, callback %lu, done %lu\n", |
9640 | s->interrupt, s->callback, s->done); |
9641 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9642 | |
9643 | len = asc_prt_line(cp, leftlen, |
9644 | " exe_noerror %lu, exe_busy %lu, exe_error %lu, exe_unknown %lu\n", |
9645 | s->exe_noerror, s->exe_busy, s->exe_error, s->exe_unknown); |
9646 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9647 | |
9648 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
9649 | len = asc_prt_line(cp, leftlen, |
9650 | " build_error %lu\n", |
9651 | s->build_error); |
9652 | } else { |
9653 | len = asc_prt_line(cp, leftlen, |
9654 | " build_error %lu, build_noreq %lu, build_nosg %lu\n", |
9655 | s->build_error, s->adv_build_noreq, s->adv_build_nosg); |
9656 | } |
9657 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9658 | |
9659 | /* |
9660 | * Display data transfer statistics. |
9661 | */ |
9662 | if (s->cont_cnt > 0) { |
9663 | len = asc_prt_line(cp, leftlen, " cont_cnt %lu, ", s->cont_cnt); |
9664 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9665 | |
9666 | len = asc_prt_line(cp, leftlen, "cont_xfer %lu.%01lu kb ", |
9667 | s->cont_xfer/2, |
9668 | ASC_TENTHS(s->cont_xfer, 2)(((10 * ((s->cont_xfer)/(2))) > (((s->cont_xfer) * 10 )/(2))) ? 0 : ((((s->cont_xfer) * 10)/(2)) - (10 * ((s-> cont_xfer)/(2)))))); |
9669 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9670 | |
9671 | /* Contiguous transfer average size */ |
9672 | len = asc_prt_line(cp, leftlen, "avg_xfer %lu.%01lu kb\n", |
9673 | (s->cont_xfer/2)/s->cont_cnt, |
9674 | ASC_TENTHS((s->cont_xfer/2), s->cont_cnt)(((10 * (((s->cont_xfer/2))/(s->cont_cnt))) > ((((s-> cont_xfer/2)) * 10)/(s->cont_cnt))) ? 0 : (((((s->cont_xfer /2)) * 10)/(s->cont_cnt)) - (10 * (((s->cont_xfer/2))/( s->cont_cnt)))))); |
9675 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9676 | } |
9677 | |
9678 | if (s->sg_cnt > 0) { |
9679 | |
9680 | len = asc_prt_line(cp, leftlen, " sg_cnt %lu, sg_elem %lu, ", |
9681 | s->sg_cnt, s->sg_elem); |
9682 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9683 | |
9684 | len = asc_prt_line(cp, leftlen, "sg_xfer %lu.%01lu kb\n", |
9685 | s->sg_xfer/2, |
9686 | ASC_TENTHS(s->sg_xfer, 2)(((10 * ((s->sg_xfer)/(2))) > (((s->sg_xfer) * 10)/( 2))) ? 0 : ((((s->sg_xfer) * 10)/(2)) - (10 * ((s->sg_xfer )/(2)))))); |
9687 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9688 | |
9689 | /* Scatter gather transfer statistics */ |
9690 | len = asc_prt_line(cp, leftlen, " avg_num_elem %lu.%01lu, ", |
9691 | s->sg_elem/s->sg_cnt, |
9692 | ASC_TENTHS(s->sg_elem, s->sg_cnt)(((10 * ((s->sg_elem)/(s->sg_cnt))) > (((s->sg_elem ) * 10)/(s->sg_cnt))) ? 0 : ((((s->sg_elem) * 10)/(s-> sg_cnt)) - (10 * ((s->sg_elem)/(s->sg_cnt)))))); |
9693 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9694 | |
9695 | len = asc_prt_line(cp, leftlen, "avg_elem_size %lu.%01lu kb, ", |
9696 | (s->sg_xfer/2)/s->sg_elem, |
9697 | ASC_TENTHS((s->sg_xfer/2), s->sg_elem)(((10 * (((s->sg_xfer/2))/(s->sg_elem))) > ((((s-> sg_xfer/2)) * 10)/(s->sg_elem))) ? 0 : (((((s->sg_xfer/ 2)) * 10)/(s->sg_elem)) - (10 * (((s->sg_xfer/2))/(s-> sg_elem)))))); |
9698 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9699 | |
9700 | len = asc_prt_line(cp, leftlen, "avg_xfer_size %lu.%01lu kb\n", |
9701 | (s->sg_xfer/2)/s->sg_cnt, |
9702 | ASC_TENTHS((s->sg_xfer/2), s->sg_cnt)(((10 * (((s->sg_xfer/2))/(s->sg_cnt))) > ((((s-> sg_xfer/2)) * 10)/(s->sg_cnt))) ? 0 : (((((s->sg_xfer/2 )) * 10)/(s->sg_cnt)) - (10 * (((s->sg_xfer/2))/(s-> sg_cnt)))))); |
9703 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9704 | } |
9705 | |
9706 | /* |
9707 | * Display request queuing statistics. |
9708 | */ |
9709 | len = asc_prt_line(cp, leftlen, |
9710 | " Active and Waiting Request Queues (Time Unit: %d HZ):\n", HZ100); |
9711 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9712 | |
9713 | active = &ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata))->active; |
9714 | waiting = &ASC_BOARDP(shp)((asc_board_t *) &((shp)->hostdata))->waiting; |
9715 | |
9716 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
9717 | chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; |
9718 | } else { |
9719 | chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; |
9720 | } |
9721 | |
9722 | for (i = 0; i <= ADV_MAX_TID15; i++) { |
9723 | |
9724 | if ((chip_scsi_id == i) || |
9725 | ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)(0x01 << ((i) & 15))) == 0)) { |
9726 | continue; |
9727 | } |
9728 | |
9729 | if (active->q_tot_cnt[i] > 0 || waiting->q_tot_cnt[i] > 0) { |
9730 | len = asc_prt_line(cp, leftlen, " target %d\n", i); |
9731 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9732 | |
9733 | len = asc_prt_line(cp, leftlen, |
9734 | " active: cnt [cur %d, max %d, tot %u], time [min %d, max %d, avg %lu.%01lu]\n", |
9735 | active->q_cur_cnt[i], active->q_max_cnt[i], |
9736 | active->q_tot_cnt[i], |
9737 | active->q_min_tim[i], active->q_max_tim[i], |
9738 | (active->q_tot_cnt[i] == 0) ? 0 : |
9739 | (active->q_tot_tim[i]/active->q_tot_cnt[i]), |
9740 | (active->q_tot_cnt[i] == 0) ? 0 : |
9741 | ASC_TENTHS(active->q_tot_tim[i], active->q_tot_cnt[i])(((10 * ((active->q_tot_tim[i])/(active->q_tot_cnt[i])) ) > (((active->q_tot_tim[i]) * 10)/(active->q_tot_cnt [i]))) ? 0 : ((((active->q_tot_tim[i]) * 10)/(active->q_tot_cnt [i])) - (10 * ((active->q_tot_tim[i])/(active->q_tot_cnt [i])))))); |
9742 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9743 | |
9744 | len = asc_prt_line(cp, leftlen, |
9745 | " waiting: cnt [cur %d, max %d, tot %u], time [min %u, max %u, avg %lu.%01lu]\n", |
9746 | waiting->q_cur_cnt[i], waiting->q_max_cnt[i], |
9747 | waiting->q_tot_cnt[i], |
9748 | waiting->q_min_tim[i], waiting->q_max_tim[i], |
9749 | (waiting->q_tot_cnt[i] == 0) ? 0 : |
9750 | (waiting->q_tot_tim[i]/waiting->q_tot_cnt[i]), |
9751 | (waiting->q_tot_cnt[i] == 0) ? 0 : |
9752 | ASC_TENTHS(waiting->q_tot_tim[i], waiting->q_tot_cnt[i])(((10 * ((waiting->q_tot_tim[i])/(waiting->q_tot_cnt[i] ))) > (((waiting->q_tot_tim[i]) * 10)/(waiting->q_tot_cnt [i]))) ? 0 : ((((waiting->q_tot_tim[i]) * 10)/(waiting-> q_tot_cnt[i])) - (10 * ((waiting->q_tot_tim[i])/(waiting-> q_tot_cnt[i])))))); |
9753 | ASC_PRT_NEXT()if (cp) { totlen += len; leftlen -= len; if (leftlen == 0) { return totlen; } cp += len; }; |
9754 | } |
9755 | } |
9756 | |
9757 | return totlen; |
9758 | } |
9759 | #endif /* ADVANSYS_STATS */ |
9760 | |
9761 | #ifdef ADVANSYS_DEBUG |
9762 | /* |
9763 | * asc_prt_scsi_host() |
9764 | */ |
9765 | STATICstatic void |
9766 | asc_prt_scsi_host(struct Scsi_Host *s) |
9767 | { |
9768 | asc_board_t *boardp; |
9769 | |
9770 | boardp = ASC_BOARDP(s)((asc_board_t *) &((s)->hostdata)); |
9771 | |
9772 | printk("Scsi_Host at addr %x\n", (unsigned) s); |
9773 | printk( |
9774 | " next %x, extra_bytes %u, host_busy %u, host_no %d, last_reset %d,\n", |
9775 | (unsigned) s->next, s->extra_bytes, s->host_busy, s->host_no, |
9776 | (unsigned) s->last_reset); |
9777 | |
9778 | printk( |
9779 | " host_wait %x, host_queue %x, hostt %x, block %x,\n", |
9780 | (unsigned) s->host_wait, (unsigned) s->host_queue, |
9781 | (unsigned) s->hostt, (unsigned) s->block); |
9782 | |
9783 | printk( |
9784 | " wish_block %d, base %x, io_port %d, n_io_port %d, irq %d, dma_channel %d,\n", |
9785 | s->wish_block, (unsigned) s->base, s->io_port, s->n_io_port, |
9786 | s->irq, s->dma_channel); |
9787 | |
9788 | printk( |
9789 | " this_id %d, can_queue %d,\n", s->this_id, s->can_queue); |
9790 | |
9791 | printk( |
9792 | " cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d, loaded_as_module %d\n", |
9793 | s->cmd_per_lun, s->sg_tablesize, s->unchecked_isa_dma, |
9794 | s->loaded_as_module); |
9795 | |
9796 | if (ASC_NARROW_BOARD(boardp)(((boardp)->flags & 0x04) == 0)) { |
9797 | asc_prt_asc_dvc_var(&ASC_BOARDP(s)((asc_board_t *) &((s)->hostdata))->dvc_var.asc_dvc_var); |
9798 | asc_prt_asc_dvc_cfg(&ASC_BOARDP(s)((asc_board_t *) &((s)->hostdata))->dvc_cfg.asc_dvc_cfg); |
9799 | } else { |
9800 | asc_prt_adv_dvc_var(&ASC_BOARDP(s)((asc_board_t *) &((s)->hostdata))->dvc_var.adv_dvc_var); |
9801 | asc_prt_adv_dvc_cfg(&ASC_BOARDP(s)((asc_board_t *) &((s)->hostdata))->dvc_cfg.adv_dvc_cfg); |
9802 | } |
9803 | } |
9804 | |
9805 | /* |
9806 | * asc_prt_scsi_cmnd() |
9807 | */ |
9808 | STATICstatic void |
9809 | asc_prt_scsi_cmnd(Scsi_Cmnd *s) |
9810 | { |
9811 | printk("Scsi_Cmnd at addr %x\n", (unsigned) s); |
9812 | |
9813 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,0)(((1) * 65536) + ((3) * 256) + (0)) |
9814 | printk( |
9815 | " host %x, device %x, target %u, lun %u\n", |
9816 | (unsigned) s->host, (unsigned) s->device, s->target, s->lun); |
9817 | #else /* version >= v1.3.0 */ |
9818 | printk( |
9819 | " host %x, device %x, target %u, lun %u, channel %u,\n", |
9820 | (unsigned) s->host, (unsigned) s->device, s->target, s->lun, |
9821 | s->channel); |
9822 | #endif /* version >= v1.3.0 */ |
9823 | |
9824 | asc_prt_hex(" CDB", s->cmnd, s->cmd_len); |
9825 | |
9826 | printk( |
9827 | " use_sg %u, sglist_len %u, abort_reason %x\n", |
9828 | s->use_sg, s->sglist_len, s->abort_reason); |
9829 | |
9830 | #if LINUX_VERSION_CODE131108 < ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
9831 | printk( |
9832 | " retries %d, allowed %d\n", |
9833 | s->retries, s->allowed); |
9834 | #else /* version >= v1.3.89 */ |
9835 | printk( |
9836 | " serial_number %x, serial_number_at_timeout %x, retries %d, allowed %d\n", |
9837 | (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout, |
9838 | s->retries, s->allowed); |
9839 | #endif /* version >= v1.3.89 */ |
9840 | |
9841 | printk( |
9842 | " timeout_per_command %d, timeout_total %d, timeout %d\n", |
9843 | s->timeout_per_command, s->timeout_total, s->timeout); |
9844 | |
9845 | printk( |
9846 | " internal_timeout %u, flags %u, this_count %d\n", |
9847 | s->internal_timeout, s->flags, s->this_count); |
9848 | |
9849 | printk( |
9850 | " scsi_done %x, done %x, host_scribble %x, result %x\n", |
9851 | (unsigned) s->scsi_done, (unsigned) s->done, |
9852 | (unsigned) s->host_scribble, s->result); |
9853 | |
9854 | printk( |
9855 | " tag %u, pid %u\n", |
9856 | (unsigned) s->tag, (unsigned) s->pid); |
9857 | } |
9858 | |
9859 | /* |
9860 | * asc_prt_asc_dvc_var() |
9861 | */ |
9862 | STATICstatic void |
9863 | asc_prt_asc_dvc_var(ASC_DVC_VAR *h) |
9864 | { |
9865 | printk("ASC_DVC_VAR at addr %x\n", (unsigned) h); |
9866 | |
9867 | printk( |
9868 | " iop_base %x, err_code %x, dvc_cntl %x, bug_fix_cntl %d,\n", |
9869 | h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl); |
9870 | |
9871 | printk( |
9872 | " bus_type %d, isr_callback %x, exe_callback %x, init_sdtr %x,\n", |
9873 | h->bus_type, (unsigned) h->isr_callback, (unsigned) h->exe_callback, |
9874 | (unsigned) h->init_sdtr); |
9875 | |
9876 | printk( |
9877 | " sdtr_done %x, use_tagged_qng %x, unit_not_ready %x, chip_no %x,\n", |
9878 | (unsigned) h->sdtr_done, (unsigned) h->use_tagged_qng, |
9879 | (unsigned) h->unit_not_ready, (unsigned) h->chip_no); |
9880 | |
9881 | printk( |
9882 | " queue_full_or_busy %x, start_motor %x, scsi_reset_wait %x, irq_no %x,\n", |
9883 | (unsigned) h->queue_full_or_busy, (unsigned) h->start_motor, |
9884 | (unsigned) h->scsi_reset_wait, (unsigned) h->irq_no); |
9885 | |
9886 | printk( |
9887 | " is_in_int %x, max_total_qng %x, cur_total_qng %x, in_critical_cnt %x,\n", |
9888 | (unsigned) h->is_in_int, (unsigned) h->max_total_qng, |
9889 | (unsigned) h->cur_total_qng, (unsigned) h->in_critical_cnt); |
9890 | |
9891 | printk( |
9892 | " last_q_shortage %x, init_state %x, no_scam %x, pci_fix_asyn_xfer %x,\n", |
9893 | (unsigned) h->last_q_shortage, (unsigned) h->init_state, |
9894 | (unsigned) h->no_scam, (unsigned) h->pci_fix_asyn_xfer); |
9895 | |
9896 | printk( |
9897 | " cfg %x, saved_ptr2func %x\n", |
9898 | (unsigned) h->cfg, (unsigned) h->saved_ptr2func); |
9899 | } |
9900 | |
9901 | /* |
9902 | * asc_prt_asc_dvc_cfg() |
9903 | */ |
9904 | STATICstatic void |
9905 | asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h) |
9906 | { |
9907 | printk("ASC_DVC_CFG at addr %x\n", (unsigned) h); |
9908 | |
9909 | printk( |
9910 | " can_tagged_qng %x, cmd_qng_enabled %x, disc_enable %x, sdtr_enable %x,\n", |
9911 | h->can_tagged_qng, h->cmd_qng_enabled, h->disc_enable, |
9912 | h->sdtr_enable); |
9913 | |
9914 | printk( |
9915 | " chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, chip_version %d,\n", |
9916 | h->chip_scsi_id, h->isa_dma_speed, h->isa_dma_channel, |
9917 | h->chip_version); |
9918 | |
9919 | printk( |
9920 | " pci_device_id %d, lib_serial_no %x, lib_version %x, mcode_date %x,\n", |
9921 | h->pci_device_id, h->lib_serial_no, h->lib_version, h->mcode_date); |
9922 | |
9923 | printk( |
9924 | " mcode_version %d, overrun_buf %x\n", |
9925 | h->mcode_version, (unsigned) h->overrun_buf); |
9926 | } |
9927 | |
9928 | /* |
9929 | * asc_prt_asc_scsi_q() |
9930 | */ |
9931 | STATICstatic void |
9932 | asc_prt_asc_scsi_q(ASC_SCSI_Q *q) |
9933 | { |
9934 | ASC_SG_HEAD *sgp; |
9935 | int i; |
9936 | |
9937 | printk("ASC_SCSI_Q at addr %x\n", (unsigned) q); |
9938 | |
9939 | printk( |
9940 | " target_ix %u, target_lun %u, srb_ptr %x, tag_code %u,\n", |
9941 | q->q2.target_ix, q->q1.target_lun, |
9942 | (unsigned) q->q2.srb_ptr, q->q2.tag_code); |
9943 | |
9944 | printk( |
9945 | " data_addr %x, data_cnt %lu, sense_addr %x, sense_len %u,\n", |
9946 | (unsigned) q->q1.data_addr, q->q1.data_cnt, |
9947 | (unsigned) q->q1.sense_addr, q->q1.sense_len); |
9948 | |
9949 | printk( |
9950 | " cdbptr %x, cdb_len %u, sg_head %x, sg_queue_cnt %u\n", |
9951 | (unsigned) q->cdbptr, q->q2.cdb_len, |
9952 | (unsigned) q->sg_head, q->q1.sg_queue_cnt); |
9953 | |
9954 | if (q->sg_head) { |
9955 | sgp = q->sg_head; |
9956 | printk("ASC_SG_HEAD at addr %x\n", (unsigned) sgp); |
9957 | printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, sgp->queue_cnt); |
9958 | for (i = 0; i < sgp->entry_cnt; i++) { |
9959 | printk(" [%u]: addr %x, bytes %lu\n", |
9960 | i, (unsigned) sgp->sg_list[i].addr, sgp->sg_list[i].bytes); |
9961 | } |
9962 | |
9963 | } |
9964 | } |
9965 | |
9966 | /* |
9967 | * asc_prt_asc_qdone_info() |
9968 | */ |
9969 | STATICstatic void |
9970 | asc_prt_asc_qdone_info(ASC_QDONE_INFO *q) |
9971 | { |
9972 | printk("ASC_QDONE_INFO at addr %x\n", (unsigned) q); |
9973 | printk( |
9974 | " srb_ptr %x, target_ix %u, cdb_len %u, tag_code %u, done_stat %x\n", |
9975 | (unsigned) q->d2.srb_ptr, q->d2.target_ix, q->d2.cdb_len, |
9976 | q->d2.tag_code, q->d3.done_stat); |
9977 | printk( |
9978 | " host_stat %x, scsi_stat %x, scsi_msg %x\n", |
9979 | q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg); |
9980 | } |
9981 | |
9982 | /* |
9983 | * asc_prt_adv_dvc_var() |
9984 | * |
9985 | * Display an ADV_DVC_VAR structure. |
9986 | */ |
9987 | STATICstatic void |
9988 | asc_prt_adv_dvc_var(ADV_DVC_VAR *h) |
9989 | { |
9990 | printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong) h); |
9991 | |
9992 | printk( |
9993 | " iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n", |
9994 | (ulong) h->iop_base, h->err_code, (unsigned) h->ultra_able); |
9995 | |
9996 | printk( |
9997 | " isr_callback 0x%x, sdtr_able 0x%x, wdtr_able 0x%x\n", |
9998 | (unsigned) h->isr_callback, (unsigned) h->wdtr_able, |
9999 | (unsigned) h->sdtr_able); |
10000 | |
10001 | printk( |
10002 | " start_motor 0x%x, scsi_reset_wait 0x%x, irq_no 0x%x,\n", |
10003 | (unsigned) h->start_motor, |
10004 | (unsigned) h->scsi_reset_wait, (unsigned) h->irq_no); |
10005 | |
10006 | printk( |
10007 | " max_host_qng 0x%x, cur_host_qng 0x%x, max_dvc_qng 0x%x\n", |
10008 | (unsigned) h->max_host_qng, (unsigned) h->cur_host_qng, |
10009 | (unsigned) h->max_dvc_qng); |
10010 | |
10011 | printk( |
10012 | " no_scam 0x%x, tagqng_able 0x%x, chip_scsi_id 0x%x, cfg 0x%lx\n", |
10013 | (unsigned) h->no_scam, (unsigned) h->tagqng_able, |
10014 | (unsigned) h->chip_scsi_id, (ulong) h->cfg); |
10015 | |
10016 | } |
10017 | |
10018 | /* |
10019 | * asc_prt_adv_dvc_cfg() |
10020 | * |
10021 | * Display an ADV_DVC_CFG structure. |
10022 | */ |
10023 | STATICstatic void |
10024 | asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h) |
10025 | { |
10026 | printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong) h); |
10027 | |
10028 | printk( |
10029 | " disc_enable 0x%x, termination 0x%x\n", |
10030 | h->disc_enable, h->termination); |
10031 | |
10032 | printk( |
10033 | " chip_version 0x%x, mcode_date 0x%x\n", |
10034 | h->chip_version, h->mcode_date); |
10035 | |
10036 | printk( |
10037 | " mcode_version 0x%x, pci_device_id 0x%x, lib_version 0x%x\n", |
10038 | h->mcode_version, h->pci_device_id, h->lib_version); |
10039 | |
10040 | printk( |
10041 | " control_flag 0x%x, pci_slot_info 0x%x\n", |
10042 | h->control_flag, h->pci_slot_info); |
10043 | } |
10044 | |
10045 | /* |
10046 | * asc_prt_adv_scsi_req_q() |
10047 | * |
10048 | * Display an ADV_SCSI_REQ_Q structure. |
10049 | */ |
10050 | STATICstatic void |
10051 | asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q) |
10052 | { |
10053 | int i; |
10054 | struct asc_sg_block *sg_ptr; |
10055 | |
10056 | printk("ADV_SCSI_REQ_Q at addr %x\n", (unsigned) q); |
10057 | |
10058 | printk( |
10059 | " target_id %u, target_lun %u, srb_ptr 0x%lx, a_flag 0x%x\n", |
10060 | q->target_id, q->target_lun, q->srb_ptr, q->a_flag); |
10061 | |
10062 | printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n", |
10063 | q->cntl, q->data_addr, q->vdata_addr); |
10064 | |
10065 | printk( |
10066 | " data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", |
10067 | q->data_cnt, q->sense_addr, q->sense_len); |
10068 | |
10069 | printk( |
10070 | " cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n", |
10071 | q->cdb_len, q->done_status, q->host_status, q->scsi_status); |
10072 | |
10073 | printk( |
10074 | " vsense_addr 0x%lx, scsiq_ptr 0x%lx, ux_wk_data_cnt %lu\n", |
10075 | (ulong) q->vsense_addr, (ulong) q->scsiq_ptr, |
10076 | (ulong) q->ux_wk_data_cnt); |
10077 | |
10078 | printk( |
10079 | " sg_list_ptr 0x%lx, sg_real_addr 0x%lx, sg_entry_cnt %u\n", |
10080 | (ulong) q->sg_list_ptr, (ulong) q->sg_real_addr, q->sg_entry_cnt); |
10081 | |
10082 | printk( |
10083 | " ux_sg_ix %u, orig_sense_len %u\n", |
10084 | q->ux_sg_ix, q->orig_sense_len); |
10085 | |
10086 | /* Display the request's ADV_SG_BLOCK structures. */ |
10087 | for (sg_ptr = q->sg_list_ptr, i = 0; sg_ptr != NULL((void *) 0); |
10088 | sg_ptr = sg_ptr->sg_ptr, i++) { |
10089 | /* |
10090 | * 'sg_ptr' is a physical address. Convert it to a virtual |
10091 | * address by indexing 'i' into the virtual address array |
10092 | * 'sg_list_ptr'. |
10093 | * |
10094 | * At the end of the each iteration of the loop 'sg_ptr' is |
10095 | * converted back into a physical address by setting 'sg_ptr' |
10096 | * to the next pointer 'sg_ptr->sg_ptr'. |
10097 | */ |
10098 | sg_ptr = &(((ADV_SG_BLOCK *) (q->sg_list_ptr))[i]); |
10099 | asc_prt_adv_sgblock(i, sg_ptr); |
10100 | } |
10101 | } |
10102 | |
10103 | /* |
10104 | * asc_prt_adv_sgblock() |
10105 | * |
10106 | * Display an ADV_SG_BLOCK structure. |
10107 | */ |
10108 | STATICstatic void |
10109 | asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b) |
10110 | { |
10111 | int i, s; |
10112 | |
10113 | /* Calculate starting entry number for the current block. */ |
10114 | s = sgblockno * NO_OF_SG_PER_BLOCK15; |
10115 | |
10116 | printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %lu)\n", |
10117 | (ulong) b, (ulong) sgblockno); |
10118 | printk( |
10119 | " first_entry_no %lu, last_entry_no %lu, sg_ptr 0x%lx\n", |
10120 | (ulong) b->first_entry_no, (ulong) b->last_entry_no, (ulong) b->sg_ptr); |
10121 | ASC_ASSERT(b->first_entry_no - s >= 0){ if (!(b->first_entry_no - s >= 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10121); } }; |
10122 | ASC_ASSERT(b->last_entry_no - s >= 0){ if (!(b->last_entry_no - s >= 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10122); } }; |
10123 | ASC_ASSERT(b->last_entry_no - s <= NO_OF_SG_PER_BLOCK){ if (!(b->last_entry_no - s <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10123); } }; |
10124 | ASC_ASSERT(b->first_entry_no - s <= NO_OF_SG_PER_BLOCK){ if (!(b->first_entry_no - s <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10124); } }; |
10125 | ASC_ASSERT(b->first_entry_no - s <= NO_OF_SG_PER_BLOCK){ if (!(b->first_entry_no - s <= 15)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10125); } }; |
10126 | ASC_ASSERT(b->first_entry_no - s <= b->last_entry_no - s){ if (!(b->first_entry_no - s <= b->last_entry_no - s )) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 10126); } }; |
10127 | for (i = b->first_entry_no - s; i <= b->last_entry_no - s; i++) { |
10128 | printk(" [%lu]: sg_addr 0x%lx, sg_count 0x%lx\n", |
10129 | (ulong) i, (ulong) b->sg_list[i].sg_addr, |
10130 | (ulong) b->sg_list[i].sg_count); |
10131 | } |
10132 | } |
10133 | |
10134 | /* |
10135 | * asc_prt_hex() |
10136 | * |
10137 | * Print hexadecimal output in 4 byte groupings 32 bytes |
10138 | * or 8 double-words per line. |
10139 | */ |
10140 | STATICstatic void |
10141 | asc_prt_hex(char *f, uchar *s, int l) |
10142 | { |
10143 | int i; |
10144 | int j; |
10145 | int k; |
10146 | int m; |
10147 | |
10148 | printk("%s: (%d bytes)\n", f, l); |
10149 | |
10150 | for (i = 0; i < l; i += 32) { |
10151 | |
10152 | /* Display a maximum of 8 double-words per line. */ |
10153 | if ((k = (l - i) / 4) >= 8) { |
10154 | k = 8; |
10155 | m = 0; |
10156 | } else { |
10157 | m = (l - i) % 4 ; |
10158 | } |
10159 | |
10160 | for (j = 0; j < k; j++) { |
10161 | printk(" %2.2X%2.2X%2.2X%2.2X", |
10162 | (unsigned) s[i+(j*4)], (unsigned) s[i+(j*4)+1], |
10163 | (unsigned) s[i+(j*4)+2], (unsigned) s[i+(j*4)+3]); |
10164 | } |
10165 | |
10166 | switch (m) { |
10167 | case 0: |
10168 | default: |
10169 | break; |
10170 | case 1: |
10171 | printk(" %2.2X", |
10172 | (unsigned) s[i+(j*4)]); |
10173 | break; |
10174 | case 2: |
10175 | printk(" %2.2X%2.2X", |
10176 | (unsigned) s[i+(j*4)], |
10177 | (unsigned) s[i+(j*4)+1]); |
10178 | break; |
10179 | case 3: |
10180 | printk(" %2.2X%2.2X%2.2X", |
10181 | (unsigned) s[i+(j*4)+1], |
10182 | (unsigned) s[i+(j*4)+2], |
10183 | (unsigned) s[i+(j*4)+3]); |
10184 | break; |
10185 | } |
10186 | |
10187 | printk("\n"); |
10188 | } |
10189 | } |
10190 | #endif /* ADVANSYS_DEBUG */ |
10191 | |
10192 | #ifdef ADVANSYS_ASSERT |
10193 | /* |
10194 | * interrupts_enabled() |
10195 | * |
10196 | * Return 1 if interrupts are enabled, otherwise return 0. |
10197 | */ |
10198 | STATICstatic int |
10199 | interrupts_enabled(void) |
10200 | { |
10201 | long flags; |
10202 | |
10203 | save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); |
10204 | if (flags & 0x0200) { |
10205 | return ASC_TRUE1; |
10206 | } else { |
10207 | return ASC_FALSE0; |
10208 | } |
10209 | } |
10210 | #endif /* ADVANSYS_ASSERT */ |
10211 | |
10212 | |
10213 | /* |
10214 | * --- Asc Library Functions |
10215 | */ |
10216 | |
10217 | ASC_INITFUNC(static ushort AscGetEisaChipCfg( unsigned short iop_base) |
10218 | STATIC ushortstatic ushort AscGetEisaChipCfg( unsigned short iop_base) |
10219 | AscGetEisaChipCfg(static ushort AscGetEisaChipCfg( unsigned short iop_base) |
10220 | PortAddr iop_basestatic ushort AscGetEisaChipCfg( unsigned short iop_base) |
10221 | )static ushort AscGetEisaChipCfg( unsigned short iop_base) |
10222 | )static ushort AscGetEisaChipCfg( unsigned short iop_base) |
10223 | { |
10224 | PortAddrunsigned short eisa_cfg_iop; |
10225 | |
10226 | eisa_cfg_iop = (PortAddrunsigned short) ASC_GET_EISA_SLOT(iop_base)(unsigned short)((iop_base) & 0xF000) | |
10227 | (PortAddrunsigned short) (ASC_EISA_CFG_IOP_MASK(0x0C86)); |
10228 | return (inpw(eisa_cfg_iop)((__builtin_constant_p((eisa_cfg_iop)) && (eisa_cfg_iop ) < 256) ? __inwc(eisa_cfg_iop) : __inw(eisa_cfg_iop))); |
10229 | } |
10230 | |
10231 | ASC_INITFUNC(static uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10232 | STATIC ucharstatic uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10233 | AscSetChipScsiID(static uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10234 | PortAddr iop_base,static uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10235 | uchar new_host_idstatic uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10236 | )static uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10237 | )static uchar AscSetChipScsiID( unsigned short iop_base, uchar new_host_id) |
10238 | { |
10239 | ushort cfg_lsw; |
10240 | |
10241 | if (AscGetChipScsiID(iop_base)(((ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) >> 8) & 7) == new_host_id) { |
10242 | return (new_host_id); |
10243 | } |
10244 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
10245 | cfg_lsw &= 0xF8FF; |
10246 | cfg_lsw |= (ushort) ((new_host_id & ASC_MAX_TID7) << 8); |
10247 | AscSetChipCfgLsw(iop_base, cfg_lsw)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg_lsw)),(((iop_base)+(0x02 )))) : __outw(((cfg_lsw)),(((iop_base)+(0x02))))); |
10248 | return (AscGetChipScsiID(iop_base)(((ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) >> 8) & 7)); |
10249 | } |
10250 | |
10251 | ASC_INITFUNC(static uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10252 | STATIC ucharstatic uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10253 | AscGetChipScsiCtrl(static uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10254 | PortAddr iop_basestatic uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10255 | )static uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10256 | )static uchar AscGetChipScsiCtrl( unsigned short iop_base) |
10257 | { |
10258 | uchar sc; |
10259 | |
10260 | AscSetBank(iop_base, 1); |
10261 | sc = inp(iop_base + IOP_REG_SC)((__builtin_constant_p((iop_base + (0x09))) && (iop_base + (0x09)) < 256) ? __inbc(iop_base + (0x09)) : __inb(iop_base + (0x09))); |
10262 | AscSetBank(iop_base, 0); |
10263 | return (sc); |
10264 | } |
10265 | |
10266 | ASC_INITFUNC(static uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10267 | STATIC ucharstatic uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10268 | AscGetChipVersion(static uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10269 | PortAddr iop_base,static uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10270 | ushort bus_typestatic uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10271 | )static uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10272 | )static uchar AscGetChipVersion( unsigned short iop_base, ushort bus_type) |
10273 | { |
10274 | if ((bus_type & ASC_IS_EISA(0x0002)) != 0) { |
10275 | PortAddrunsigned short eisa_iop; |
10276 | uchar revision; |
10277 | eisa_iop = (PortAddrunsigned short) ASC_GET_EISA_SLOT(iop_base)(unsigned short)((iop_base) & 0xF000) | |
10278 | (PortAddrunsigned short) ASC_EISA_REV_IOP_MASK(0x0C83); |
10279 | revision = inp(eisa_iop)((__builtin_constant_p((eisa_iop)) && (eisa_iop) < 256) ? __inbc(eisa_iop) : __inb(eisa_iop)); |
10280 | return ((uchar) ((ASC_CHIP_MIN_VER_EISA(0x41) - 1) + revision)); |
10281 | } |
10282 | return (AscGetChipVerNo(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x03))) && ((iop_base)+(0x03)) < 256) ? __inbc((iop_base)+(0x03)) : __inb ((iop_base)+(0x03)))); |
10283 | } |
10284 | |
10285 | ASC_INITFUNC(static ushort AscGetChipBusType( unsigned short iop_base) |
10286 | STATIC ushortstatic ushort AscGetChipBusType( unsigned short iop_base) |
10287 | AscGetChipBusType(static ushort AscGetChipBusType( unsigned short iop_base) |
10288 | PortAddr iop_basestatic ushort AscGetChipBusType( unsigned short iop_base) |
10289 | )static ushort AscGetChipBusType( unsigned short iop_base) |
10290 | )static ushort AscGetChipBusType( unsigned short iop_base) |
10291 | { |
10292 | ushort chip_ver; |
10293 | |
10294 | chip_ver = AscGetChipVerNo(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x03))) && ((iop_base)+(0x03)) < 256) ? __inbc((iop_base)+(0x03)) : __inb ((iop_base)+(0x03))); |
10295 | if ( |
10296 | (chip_ver >= ASC_CHIP_MIN_VER_VL(0x01)) |
10297 | && (chip_ver <= ASC_CHIP_MAX_VER_VL(0x07)) |
10298 | ) { |
10299 | if ( |
10300 | ((iop_base & 0x0C30) == 0x0C30) |
10301 | || ((iop_base & 0x0C50) == 0x0C50) |
10302 | ) { |
10303 | return (ASC_IS_EISA(0x0002)); |
10304 | } |
10305 | return (ASC_IS_VL(0x0040)); |
10306 | } |
10307 | if ((chip_ver >= ASC_CHIP_MIN_VER_ISA(0x11)) && |
10308 | (chip_ver <= ASC_CHIP_MAX_VER_ISA(0x27))) { |
10309 | if (chip_ver >= ASC_CHIP_MIN_VER_ISA_PNP(0x21)) { |
10310 | return (ASC_IS_ISAPNP(0x0081)); |
10311 | } |
10312 | return (ASC_IS_ISA(0x0001)); |
10313 | } else if ((chip_ver >= ASC_CHIP_MIN_VER_PCI(0x09)) && |
10314 | (chip_ver <= ASC_CHIP_MAX_VER_PCI(0x0F))) { |
10315 | return (ASC_IS_PCI(0x0004)); |
10316 | } |
10317 | return (0); |
10318 | } |
10319 | |
10320 | ASC_INITFUNC(static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10321 | STATIC ulongstatic ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10322 | AscLoadMicroCode(static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10323 | PortAddr iop_base,static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10324 | ushort s_addr,static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10325 | ushort *mcode_buf,static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10326 | ushort mcode_sizestatic ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10327 | )static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10328 | )static ulong AscLoadMicroCode( unsigned short iop_base, ushort s_addr, ushort *mcode_buf, ushort mcode_size) |
10329 | { |
10330 | ulong chksum; |
10331 | ushort mcode_word_size; |
10332 | ushort mcode_chksum; |
10333 | |
10334 | mcode_word_size = (ushort) (mcode_size >> 1); |
10335 | AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size); |
10336 | AscMemWordCopyToLram(iop_base, s_addr, mcode_buf, mcode_word_size); |
10337 | chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size); |
10338 | mcode_chksum = (ushort) AscMemSumLramWord(iop_base, |
10339 | (ushort) ASC_CODE_SEC_BEG(ushort)0x0080, |
10340 | (ushort) ((mcode_size - s_addr - (ushort) ASC_CODE_SEC_BEG(ushort)0x0080) / 2)); |
10341 | AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W(ushort)0x0032, mcode_chksum); |
10342 | AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W(ushort)0x0034, mcode_size); |
10343 | return (chksum); |
10344 | } |
10345 | |
10346 | ASC_INITFUNC(static int AscFindSignature( unsigned short iop_base) |
10347 | STATIC intstatic int AscFindSignature( unsigned short iop_base) |
10348 | AscFindSignature(static int AscFindSignature( unsigned short iop_base) |
10349 | PortAddr iop_basestatic int AscFindSignature( unsigned short iop_base) |
10350 | )static int AscFindSignature( unsigned short iop_base) |
10351 | )static int AscFindSignature( unsigned short iop_base) |
10352 | { |
10353 | ushort sig_word; |
10354 | |
10355 | if (AscGetChipSignatureByte(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x01))) && ((iop_base)+(0x01)) < 256) ? __inbc((iop_base)+(0x01)) : __inb ((iop_base)+(0x01))) == (uchar) ASC_1000_ID1B0x25) { |
10356 | sig_word = AscGetChipSignatureWord(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x00))) && ((iop_base)+(0x00)) < 256) ? __inwc((iop_base)+(0x00)) : __inw ((iop_base)+(0x00))); |
10357 | if ((sig_word == (ushort) ASC_1000_ID0W0x04C1) || |
10358 | (sig_word == (ushort) ASC_1000_ID0W_FIX0x00C1)) { |
10359 | return (1); |
10360 | } |
10361 | } |
10362 | return (0); |
10363 | } |
10364 | |
10365 | STATICstatic uchar _isa_pnp_inited ASC_INITDATA = 0; |
10366 | STATICstatic PortAddrunsigned short _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX11] ASC_INITDATA = |
10367 | { |
10368 | 0x100, ASC_IOADR_1(unsigned short)0x0110, 0x120, ASC_IOADR_2(unsigned short)0x0130, 0x140, ASC_IOADR_3(unsigned short)0x0150, ASC_IOADR_4(unsigned short)0x0190, |
10369 | ASC_IOADR_5(unsigned short)0x0210, ASC_IOADR_6(unsigned short)0x0230, ASC_IOADR_7(unsigned short)0x0250, ASC_IOADR_8(unsigned short)0x0330 |
10370 | }; |
10371 | |
10372 | ASC_INITFUNC(static unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10373 | STATIC PortAddrstatic unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10374 | AscSearchIOPortAddr(static unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10375 | PortAddr iop_beg,static unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10376 | ushort bus_typestatic unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10377 | )static unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10378 | )static unsigned short AscSearchIOPortAddr( unsigned short iop_beg , ushort bus_type) |
10379 | { |
10380 | if (bus_type & ASC_IS_VL(0x0040)) { |
10381 | while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) { |
10382 | if (AscGetChipVersion(iop_beg, bus_type) <= ASC_CHIP_MAX_VER_VL(0x07)) { |
10383 | return (iop_beg); |
10384 | } |
10385 | } |
10386 | return (0); |
10387 | } |
10388 | if (bus_type & ASC_IS_ISA(0x0001)) { |
10389 | if (_isa_pnp_inited == 0) { |
10390 | AscSetISAPNPWaitForKey(); |
10391 | _isa_pnp_inited++; |
10392 | } |
10393 | while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) { |
10394 | if ((AscGetChipVersion(iop_beg, bus_type) & ASC_CHIP_VER_ISA_BIT(0x30)) != 0) { |
10395 | return (iop_beg); |
10396 | } |
10397 | } |
10398 | return (0); |
10399 | } |
10400 | if (bus_type & ASC_IS_EISA(0x0002)) { |
10401 | if ((iop_beg = AscSearchIOPortAddrEISA(iop_beg)) != 0) { |
10402 | return (iop_beg); |
10403 | } |
10404 | return (0); |
10405 | } |
10406 | return (0); |
10407 | } |
10408 | |
10409 | ASC_INITFUNC(static unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10410 | STATIC PortAddrstatic unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10411 | AscSearchIOPortAddr11(static unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10412 | PortAddr s_addrstatic unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10413 | )static unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10414 | )static unsigned short AscSearchIOPortAddr11( unsigned short s_addr ) |
10415 | { |
10416 | int i; |
10417 | PortAddrunsigned short iop_base; |
10418 | |
10419 | for (i = 0; i < ASC_IOADR_TABLE_MAX_IX11; i++) { |
10420 | if (_asc_def_iop_base[i] > s_addr) { |
10421 | break; |
10422 | } |
10423 | } |
10424 | for (; i < ASC_IOADR_TABLE_MAX_IX11; i++) { |
10425 | iop_base = _asc_def_iop_base[i]; |
10426 | if (check_region(iop_base, ASC_IOADR_GAP0x10) != 0) { |
10427 | ASC_DBG1(1, |
10428 | "AscSearchIOPortAddr11: check_region() failed I/O port %x\n", |
10429 | iop_base); |
10430 | continue; |
10431 | } |
10432 | ASC_DBG1(1, "AscSearchIOPortAddr11: probing I/O port %x\n", iop_base); |
10433 | if (AscFindSignature(iop_base)) { |
10434 | return (iop_base); |
10435 | } |
10436 | } |
10437 | return (0); |
10438 | } |
10439 | |
10440 | ASC_INITFUNC(static void AscToggleIRQAct( unsigned short iop_base) |
10441 | STATIC voidstatic void AscToggleIRQAct( unsigned short iop_base) |
10442 | AscToggleIRQAct(static void AscToggleIRQAct( unsigned short iop_base) |
10443 | PortAddr iop_basestatic void AscToggleIRQAct( unsigned short iop_base) |
10444 | )static void AscToggleIRQAct( unsigned short iop_base) |
10445 | )static void AscToggleIRQAct( unsigned short iop_base) |
10446 | { |
10447 | AscSetChipStatus(iop_base, CIW_IRQ_ACT)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x1000)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x1000)),(((iop_base )+(0x0E))))); |
10448 | AscSetChipStatus(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc(((0)),(((iop_base)+(0x0E)))) : __outw(((0)),(((iop_base)+(0x0E))))); |
10449 | return; |
10450 | } |
10451 | |
10452 | ASC_INITFUNC(static void AscSetISAPNPWaitForKey( void) |
10453 | STATIC voidstatic void AscSetISAPNPWaitForKey( void) |
10454 | AscSetISAPNPWaitForKey(static void AscSetISAPNPWaitForKey( void) |
10455 | void)static void AscSetISAPNPWaitForKey( void) |
10456 | )static void AscSetISAPNPWaitForKey( void) |
10457 | { |
10458 | outp(ASC_ISA_PNP_PORT_ADDR, 0x02)((__builtin_constant_p((((0x279)))) && (((0x279))) < 256) ? __outbc(((0x02)),(((0x279)))) : __outb(((0x02)),(((0x279 ))))); |
10459 | outp(ASC_ISA_PNP_PORT_WRITE, 0x02)((__builtin_constant_p(((((0x279)+0x800)))) && ((((0x279 )+0x800))) < 256) ? __outbc(((0x02)),((((0x279)+0x800)))) : __outb(((0x02)),((((0x279)+0x800))))); |
10460 | return; |
10461 | } |
10462 | |
10463 | ASC_INITFUNC(static uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10464 | STATIC ucharstatic uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10465 | AscGetChipIRQ(static uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10466 | PortAddr iop_base,static uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10467 | ushort bus_typestatic uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10468 | )static uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10469 | )static uchar AscGetChipIRQ( unsigned short iop_base, ushort bus_type ) |
10470 | { |
10471 | ushort cfg_lsw; |
10472 | uchar chip_irq; |
10473 | |
10474 | if ((bus_type & ASC_IS_EISA(0x0002)) != 0) { |
10475 | cfg_lsw = AscGetEisaChipCfg(iop_base); |
10476 | chip_irq = (uchar) (((cfg_lsw >> 8) & 0x07) + 10); |
10477 | if ((chip_irq == 13) || (chip_irq > 15)) { |
10478 | return (0); |
10479 | } |
10480 | return (chip_irq); |
10481 | } |
10482 | if ((bus_type & ASC_IS_VL(0x0040)) != 0) { |
10483 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
10484 | chip_irq = (uchar) (((cfg_lsw >> 2) & 0x07)); |
10485 | if ((chip_irq == 0) || |
10486 | (chip_irq == 4) || |
10487 | (chip_irq == 7)) { |
10488 | return (0); |
10489 | } |
10490 | return ((uchar) (chip_irq + (ASC_MIN_IRQ_NO10 - 1))); |
10491 | } |
10492 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
10493 | chip_irq = (uchar) (((cfg_lsw >> 2) & 0x03)); |
10494 | if (chip_irq == 3) |
10495 | chip_irq += (uchar) 2; |
10496 | return ((uchar) (chip_irq + ASC_MIN_IRQ_NO10)); |
10497 | } |
10498 | |
10499 | ASC_INITFUNC(static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10500 | STATIC ucharstatic uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10501 | AscSetChipIRQ(static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10502 | PortAddr iop_base,static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10503 | uchar irq_no,static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10504 | ushort bus_typestatic uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10505 | )static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10506 | )static uchar AscSetChipIRQ( unsigned short iop_base, uchar irq_no , ushort bus_type) |
10507 | { |
10508 | ushort cfg_lsw; |
10509 | |
10510 | if ((bus_type & ASC_IS_VL(0x0040)) != 0) { |
10511 | if (irq_no != 0) { |
10512 | if ((irq_no < ASC_MIN_IRQ_NO10) || (irq_no > ASC_MAX_IRQ_NO15)) { |
10513 | irq_no = 0; |
10514 | } else { |
10515 | irq_no -= (uchar) ((ASC_MIN_IRQ_NO10 - 1)); |
10516 | } |
10517 | } |
10518 | cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) & 0xFFE3); |
10519 | cfg_lsw |= (ushort) 0x0010; |
10520 | AscSetChipCfgLsw(iop_base, cfg_lsw)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg_lsw)),(((iop_base)+(0x02 )))) : __outw(((cfg_lsw)),(((iop_base)+(0x02))))); |
10521 | AscToggleIRQAct(iop_base); |
10522 | cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) & 0xFFE0); |
10523 | cfg_lsw |= (ushort) ((irq_no & 0x07) << 2); |
10524 | AscSetChipCfgLsw(iop_base, cfg_lsw)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg_lsw)),(((iop_base)+(0x02 )))) : __outw(((cfg_lsw)),(((iop_base)+(0x02))))); |
10525 | AscToggleIRQAct(iop_base); |
10526 | return (AscGetChipIRQ(iop_base, bus_type)); |
10527 | } |
10528 | if ((bus_type & (ASC_IS_ISA(0x0001))) != 0) { |
10529 | if (irq_no == 15) |
10530 | irq_no -= (uchar) 2; |
10531 | irq_no -= (uchar) ASC_MIN_IRQ_NO10; |
10532 | cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) & 0xFFF3); |
10533 | cfg_lsw |= (ushort) ((irq_no & 0x03) << 2); |
10534 | AscSetChipCfgLsw(iop_base, cfg_lsw)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg_lsw)),(((iop_base)+(0x02 )))) : __outw(((cfg_lsw)),(((iop_base)+(0x02))))); |
10535 | return (AscGetChipIRQ(iop_base, bus_type)); |
10536 | } |
10537 | return (0); |
10538 | } |
10539 | |
10540 | ASC_INITFUNC(static void AscEnableIsaDma( uchar dma_channel) |
10541 | STATIC voidstatic void AscEnableIsaDma( uchar dma_channel) |
10542 | AscEnableIsaDma(static void AscEnableIsaDma( uchar dma_channel) |
10543 | uchar dma_channelstatic void AscEnableIsaDma( uchar dma_channel) |
10544 | )static void AscEnableIsaDma( uchar dma_channel) |
10545 | )static void AscEnableIsaDma( uchar dma_channel) |
10546 | { |
10547 | if (dma_channel < 4) { |
10548 | outp(0x000B, (ushort) (0xC0 | dma_channel))((__builtin_constant_p(((0x000B))) && ((0x000B)) < 256) ? __outbc((((ushort) (0xC0 | dma_channel))),((0x000B))) : __outb((((ushort) (0xC0 | dma_channel))),((0x000B)))); |
10549 | outp(0x000A, dma_channel)((__builtin_constant_p(((0x000A))) && ((0x000A)) < 256) ? __outbc(((dma_channel)),((0x000A))) : __outb(((dma_channel )),((0x000A)))); |
10550 | } else if (dma_channel < 8) { |
10551 | outp(0x00D6, (ushort) (0xC0 | (dma_channel - 4)))((__builtin_constant_p(((0x00D6))) && ((0x00D6)) < 256) ? __outbc((((ushort) (0xC0 | (dma_channel - 4)))),((0x00D6 ))) : __outb((((ushort) (0xC0 | (dma_channel - 4)))),((0x00D6 )))); |
10552 | outp(0x00D4, (ushort) (dma_channel - 4))((__builtin_constant_p(((0x00D4))) && ((0x00D4)) < 256) ? __outbc((((ushort) (dma_channel - 4))),((0x00D4))) : __outb ((((ushort) (dma_channel - 4))),((0x00D4)))); |
10553 | } |
10554 | return; |
10555 | } |
10556 | |
10557 | STATICstatic int |
10558 | AscIsrChipHalted( |
10559 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
10560 | ) |
10561 | { |
10562 | EXT_MSG ext_msg; |
10563 | EXT_MSG out_msg; |
10564 | ushort halt_q_addr; |
10565 | int sdtr_accept; |
10566 | ushort int_halt_code; |
10567 | ASC_SCSI_BIT_ID_TYPEuchar scsi_busy; |
10568 | ASC_SCSI_BIT_ID_TYPEuchar target_id; |
10569 | PortAddrunsigned short iop_base; |
10570 | uchar tag_code; |
10571 | uchar q_status; |
10572 | uchar halt_qp; |
10573 | uchar sdtr_data; |
10574 | uchar target_ix; |
10575 | uchar q_cntl, tid_no; |
10576 | uchar cur_dvc_qng; |
10577 | uchar asyn_sdtr; |
10578 | uchar scsi_status; |
10579 | asc_board_t *boardp; |
10580 | |
10581 | ASC_ASSERT(asc_dvc->drv_ptr != 0){ if (!(asc_dvc->drv_ptr != 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 10581); } }; |
10582 | boardp = (asc_board_t *) asc_dvc->drv_ptr; |
10583 | |
10584 | iop_base = asc_dvc->iop_base; |
10585 | int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040); |
10586 | |
10587 | halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B(ushort)0x004D); |
10588 | halt_q_addr = ASC_QNO_TO_QADDR(halt_qp)(((0x4000))+((int)(halt_qp) << 6)); |
10589 | target_ix = AscReadLramByte(iop_base, |
10590 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TARGET_IX26)); |
10591 | q_cntl = AscReadLramByte(iop_base, |
10592 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4)); |
10593 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
10594 | target_id = (uchar) ASC_TID_TO_TARGET_ID(tid_no)(uchar)(0x01 << (tid_no)); |
10595 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { |
10596 | |
10597 | asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB0x41; |
10598 | } else { |
10599 | asyn_sdtr = 0; |
10600 | } |
10601 | if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX(ushort)0x8300) { |
10602 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { |
10603 | AscSetChipSDTR(iop_base, 0, tid_no); |
10604 | boardp->sdtr_data[tid_no] = 0; |
10605 | } |
10606 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10607 | return (0); |
10608 | } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX(ushort)0x8400) { |
10609 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { |
10610 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); |
10611 | boardp->sdtr_data[tid_no] = asyn_sdtr; |
10612 | } |
10613 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10614 | return (0); |
10615 | } else if (int_halt_code == ASC_HALT_EXTMSG_IN(ushort)0x8000) { |
10616 | |
10617 | AscMemWordCopyFromLram(iop_base, |
10618 | ASCV_MSGIN_BEG(0x0000 +8), |
10619 | (ushort *) & ext_msg, |
10620 | (ushort) (sizeof (EXT_MSG) >> 1)); |
10621 | |
10622 | if (ext_msg.msg_type == MS_EXTEND0x01 && |
10623 | ext_msg.msg_req == MS_SDTR_CODE0x01 && |
10624 | ext_msg.msg_len == MS_SDTR_LEN0x03) { |
10625 | sdtr_accept = TRUE1; |
10626 | if ((ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset > ASC_SYN_MAX_OFFSET0x0F)) { |
10627 | |
10628 | sdtr_accept = FALSE0; |
10629 | ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset = ASC_SYN_MAX_OFFSET0x0F; |
10630 | } |
10631 | if ((ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period < |
10632 | asc_dvc->sdtr_period_tbl[asc_dvc->host_init_sdtr_index]) || |
10633 | (ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period > |
10634 | asc_dvc->sdtr_period_tbl[asc_dvc->max_sdtr_index])) { |
10635 | sdtr_accept = FALSE0; |
10636 | ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period = |
10637 | asc_dvc->sdtr_period_tbl[asc_dvc->host_init_sdtr_index]; |
10638 | } |
10639 | if (sdtr_accept) { |
10640 | sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period, |
10641 | ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset); |
10642 | if ((sdtr_data == 0xFF)) { |
10643 | |
10644 | q_cntl |= QC_MSG_OUT0x40; |
10645 | asc_dvc->init_sdtr &= ~target_id; |
10646 | asc_dvc->sdtr_done &= ~target_id; |
10647 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); |
10648 | boardp->sdtr_data[tid_no] = asyn_sdtr; |
10649 | } |
10650 | } |
10651 | if (ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset == 0) { |
10652 | |
10653 | q_cntl &= ~QC_MSG_OUT0x40; |
10654 | asc_dvc->init_sdtr &= ~target_id; |
10655 | asc_dvc->sdtr_done &= ~target_id; |
10656 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); |
10657 | } else { |
10658 | if (sdtr_accept && (q_cntl & QC_MSG_OUT0x40)) { |
10659 | |
10660 | q_cntl &= ~QC_MSG_OUT0x40; |
10661 | asc_dvc->sdtr_done |= target_id; |
10662 | asc_dvc->init_sdtr |= target_id; |
10663 | asc_dvc->pci_fix_asyn_xfer &= ~target_id; |
10664 | sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period, |
10665 | ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset); |
10666 | AscSetChipSDTR(iop_base, sdtr_data, tid_no); |
10667 | boardp->sdtr_data[tid_no] = sdtr_data; |
10668 | } else { |
10669 | |
10670 | q_cntl |= QC_MSG_OUT0x40; |
10671 | AscMsgOutSDTR(asc_dvc, |
10672 | ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period, |
10673 | ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset); |
10674 | asc_dvc->pci_fix_asyn_xfer &= ~target_id; |
10675 | sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period, |
10676 | ext_msg.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset); |
10677 | AscSetChipSDTR(iop_base, sdtr_data, tid_no); |
10678 | boardp->sdtr_data[tid_no] = sdtr_data; |
10679 | asc_dvc->sdtr_done |= target_id; |
10680 | asc_dvc->init_sdtr |= target_id; |
10681 | } |
10682 | } |
10683 | |
10684 | AscWriteLramByte(iop_base, |
10685 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4), |
10686 | q_cntl); |
10687 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10688 | return (0); |
10689 | } else if (ext_msg.msg_type == MS_EXTEND0x01 && |
10690 | ext_msg.msg_req == MS_WDTR_CODE0x03 && |
10691 | ext_msg.msg_len == MS_WDTR_LEN0x02) { |
10692 | |
10693 | ext_msg.wdtr_widthu_ext_msg.wdtr.wdtr_width = 0; |
10694 | AscMemWordCopyToLram(iop_base, |
10695 | ASCV_MSGOUT_BEG0x0000, |
10696 | (ushort *) & ext_msg, |
10697 | (ushort) (sizeof (EXT_MSG) >> 1)); |
10698 | q_cntl |= QC_MSG_OUT0x40; |
10699 | AscWriteLramByte(iop_base, |
10700 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4), |
10701 | q_cntl); |
10702 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10703 | return (0); |
10704 | } else { |
10705 | |
10706 | ext_msg.msg_type = M1_MSG_REJECT0x07; |
10707 | AscMemWordCopyToLram(iop_base, |
10708 | ASCV_MSGOUT_BEG0x0000, |
10709 | (ushort *) & ext_msg, |
10710 | (ushort) (sizeof (EXT_MSG) >> 1)); |
10711 | q_cntl |= QC_MSG_OUT0x40; |
10712 | AscWriteLramByte(iop_base, |
10713 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4), |
10714 | q_cntl); |
10715 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10716 | return (0); |
10717 | } |
10718 | } else if (int_halt_code == ASC_HALT_CHK_CONDITION(ushort)0x8100) { |
10719 | |
10720 | q_cntl |= QC_REQ_SENSE0x80; |
10721 | |
10722 | if ((asc_dvc->init_sdtr & target_id) != 0) { |
10723 | |
10724 | asc_dvc->sdtr_done &= ~target_id; |
10725 | |
10726 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no)AscReadLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8)+ (ushort)tid_no)) ;; |
10727 | q_cntl |= QC_MSG_OUT0x40; |
10728 | AscMsgOutSDTR(asc_dvc, |
10729 | asc_dvc->sdtr_period_tbl[(sdtr_data >> 4) & |
10730 | (uchar) (asc_dvc->max_sdtr_index - 1)], |
10731 | (uchar) (sdtr_data & (uchar) ASC_SYN_MAX_OFFSET0x0F)); |
10732 | } |
10733 | |
10734 | AscWriteLramByte(iop_base, |
10735 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4), |
10736 | q_cntl); |
10737 | |
10738 | tag_code = AscReadLramByte(iop_base, |
10739 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TAG_CODE29)); |
10740 | tag_code &= 0xDC; |
10741 | if ( |
10742 | (asc_dvc->pci_fix_asyn_xfer & target_id) |
10743 | && !(asc_dvc->pci_fix_asyn_xfer_always & target_id) |
10744 | ) { |
10745 | |
10746 | tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT0x04 |
10747 | | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX0x08); |
10748 | |
10749 | } |
10750 | AscWriteLramByte(iop_base, |
10751 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TAG_CODE29), |
10752 | tag_code); |
10753 | |
10754 | q_status = AscReadLramByte(iop_base, |
10755 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_STATUS2)); |
10756 | q_status |= (QS_READY0x01 | QS_BUSY0x08); |
10757 | AscWriteLramByte(iop_base, |
10758 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
10759 | q_status); |
10760 | |
10761 | scsi_busy = AscReadLramByte(iop_base, |
10762 | (ushort) ASCV_SCSIBUSY_B(ushort)0x004B); |
10763 | scsi_busy &= ~target_id; |
10764 | AscWriteLramByte(iop_base, (ushort) ASCV_SCSIBUSY_B(ushort)0x004B, scsi_busy); |
10765 | |
10766 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10767 | return (0); |
10768 | } else if (int_halt_code == ASC_HALT_SDTR_REJECTED(ushort)0x4000) { |
10769 | |
10770 | AscMemWordCopyFromLram(iop_base, |
10771 | ASCV_MSGOUT_BEG0x0000, |
10772 | (ushort *) & out_msg, |
10773 | (ushort) (sizeof (EXT_MSG) >> 1)); |
10774 | |
10775 | if ((out_msg.msg_type == MS_EXTEND0x01) && |
10776 | (out_msg.msg_len == MS_SDTR_LEN0x03) && |
10777 | (out_msg.msg_req == MS_SDTR_CODE0x01)) { |
10778 | |
10779 | asc_dvc->init_sdtr &= ~target_id; |
10780 | asc_dvc->sdtr_done &= ~target_id; |
10781 | AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); |
10782 | boardp->sdtr_data[tid_no] = asyn_sdtr; |
10783 | } |
10784 | q_cntl &= ~QC_MSG_OUT0x40; |
10785 | AscWriteLramByte(iop_base, |
10786 | (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL4), |
10787 | q_cntl); |
10788 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10789 | return (0); |
10790 | } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL(ushort)0x8200) { |
10791 | |
10792 | scsi_status = AscReadLramByte(iop_base, |
10793 | (ushort) ((ushort) halt_q_addr + (ushort) ASC_SCSIQ_SCSI_STATUS34)); |
10794 | cur_dvc_qng = AscReadLramByte(iop_base, |
10795 | (ushort) ((ushort) ASC_QADR_BEG(0x4000) + (ushort) target_ix)); |
10796 | if ((cur_dvc_qng > 0) && |
10797 | (asc_dvc->cur_dvc_qng[tid_no] > 0)) { |
10798 | |
10799 | scsi_busy = AscReadLramByte(iop_base, |
10800 | (ushort) ASCV_SCSIBUSY_B(ushort)0x004B); |
10801 | scsi_busy |= target_id; |
10802 | AscWriteLramByte(iop_base, |
10803 | (ushort) ASCV_SCSIBUSY_B(ushort)0x004B, scsi_busy); |
10804 | asc_dvc->queue_full_or_busy |= target_id; |
10805 | |
10806 | if (scsi_status == SS_QUEUE_FULL0x28) { |
10807 | if (cur_dvc_qng > ASC_MIN_TAGGED_CMD7) { |
10808 | cur_dvc_qng -= 1; |
10809 | asc_dvc->max_dvc_qng[tid_no] = cur_dvc_qng; |
10810 | |
10811 | AscWriteLramByte(iop_base, |
10812 | (ushort) ((ushort) ASCV_MAX_DVC_QNG_BEG(ushort)0x0020 + |
10813 | (ushort) tid_no), |
10814 | cur_dvc_qng); |
10815 | |
10816 | /* |
10817 | * Set the device queue depth to the number of |
10818 | * active requests when the QUEUE FULL condition |
10819 | * was encountered. |
10820 | */ |
10821 | boardp->queue_full |= target_id; |
10822 | boardp->queue_full_cnt[tid_no] = cur_dvc_qng; |
10823 | #if ASC_QUEUE_FLOW_CONTROL |
10824 | if (boardp->device[tid_no] != NULL((void *) 0) && |
10825 | boardp->device[tid_no]->queue_curr_depth > |
10826 | cur_dvc_qng) { |
10827 | boardp->device[tid_no]->queue_curr_depth = |
10828 | cur_dvc_qng; |
10829 | } |
10830 | #endif /* ASC_QUEUE_FLOW_CONTROL */ |
10831 | } |
10832 | } |
10833 | } |
10834 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
10835 | return (0); |
10836 | } |
10837 | return (0); |
10838 | } |
10839 | |
10840 | STATICstatic uchar |
10841 | _AscCopyLramScsiDoneQ( |
10842 | PortAddrunsigned short iop_base, |
10843 | ushort q_addr, |
10844 | REGregister ASC_QDONE_INFO * scsiq, |
10845 | ulong max_dma_count |
10846 | ) |
10847 | { |
10848 | ushort _val; |
10849 | uchar sg_queue_cnt; |
10850 | |
10851 | DvcGetQinfo(iop_base, |
10852 | (ushort) (q_addr + (ushort) ASC_SCSIQ_DONE_INFO_BEG22), |
10853 | (ushort *) scsiq, |
10854 | (ushort) ((sizeof (ASC_SCSIQ_2) + sizeof (ASC_SCSIQ_3)) / 2)); |
10855 | _val = AscReadLramWord(iop_base, |
10856 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS2)); |
10857 | scsiq->q_status = (uchar) _val; |
10858 | scsiq->q_no = (uchar) (_val >> 8); |
10859 | _val = AscReadLramWord(iop_base, |
10860 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_CNTL4)); |
10861 | scsiq->cntl = (uchar) _val; |
10862 | sg_queue_cnt = (uchar) (_val >> 8); |
10863 | _val = AscReadLramWord(iop_base, |
10864 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_SENSE_LEN20)); |
10865 | scsiq->sense_len = (uchar) _val; |
10866 | scsiq->extra_bytes = (uchar) (_val >> 8); |
10867 | scsiq->remain_bytes = AscReadLramWord(iop_base, |
10868 | (ushort) (q_addr + (ushort) ASC_SCSIQ_DW_REMAIN_XFER_CNT60)); |
10869 | scsiq->remain_bytes &= max_dma_count; |
10870 | return (sg_queue_cnt); |
10871 | } |
10872 | |
10873 | STATICstatic int |
10874 | AscIsrQDone( |
10875 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
10876 | ) |
10877 | { |
10878 | uchar next_qp; |
10879 | uchar n_q_used; |
10880 | uchar sg_list_qp; |
10881 | uchar sg_queue_cnt; |
10882 | uchar q_cnt; |
10883 | uchar done_q_tail; |
10884 | uchar tid_no; |
10885 | ASC_SCSI_BIT_ID_TYPEuchar scsi_busy; |
10886 | ASC_SCSI_BIT_ID_TYPEuchar target_id; |
10887 | PortAddrunsigned short iop_base; |
10888 | ushort q_addr; |
10889 | ushort sg_q_addr; |
10890 | uchar cur_target_qng; |
10891 | ASC_QDONE_INFO scsiq_buf; |
10892 | REGregister ASC_QDONE_INFO *scsiq; |
10893 | int false_overrun; |
10894 | ASC_ISR_CALLBACK asc_isr_callback; |
10895 | |
10896 | iop_base = asc_dvc->iop_base; |
10897 | asc_isr_callback = (ASC_ISR_CALLBACK) asc_dvc->isr_callback; |
10898 | n_q_used = 1; |
10899 | scsiq = (ASC_QDONE_INFO *) & scsiq_buf; |
10900 | done_q_tail = (uchar) AscGetVarDoneQTail(iop_base)AscReadLramWord((iop_base), (ushort)0x005A); |
10901 | q_addr = ASC_QNO_TO_QADDR(done_q_tail)(((0x4000))+((int)(done_q_tail) << 6)); |
10902 | next_qp = AscReadLramByte(iop_base, |
10903 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_FWD0)); |
10904 | if (next_qp != ASC_QLINK_END0xFF) { |
10905 | AscPutVarDoneQTail(iop_base, next_qp)AscWriteLramWord((iop_base), (ushort)0x005A, next_qp); |
10906 | q_addr = ASC_QNO_TO_QADDR(next_qp)(((0x4000))+((int)(next_qp) << 6)); |
10907 | sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, |
10908 | asc_dvc->max_dma_count); |
10909 | AscWriteLramByte(iop_base, |
10910 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
10911 | (uchar) (scsiq->q_status & (uchar) ~ (QS_READY0x01 | QS_ABORTED0x40))); |
10912 | tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix)((scsiq->d2.target_ix) & 7); |
10913 | target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix)(0x01 << ((scsiq->d2.target_ix) & 7)); |
10914 | if ((scsiq->cntl & QC_SG_HEAD0x04) != 0) { |
10915 | sg_q_addr = q_addr; |
10916 | sg_list_qp = next_qp; |
10917 | for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) { |
10918 | sg_list_qp = AscReadLramByte(iop_base, |
10919 | (ushort) (sg_q_addr + (ushort) ASC_SCSIQ_B_FWD0)); |
10920 | sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp)(((0x4000))+((int)(sg_list_qp) << 6)); |
10921 | if (sg_list_qp == ASC_QLINK_END0xFF) { |
10922 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_SG_Q_LINKS0x18); |
10923 | scsiq->d3.done_stat = QD_WITH_ERROR0x04; |
10924 | scsiq->d3.host_stat = QHSTA_D_QDONE_SG_LIST_CORRUPTED0x21; |
10925 | goto FATAL_ERR_QDONE; |
10926 | } |
10927 | AscWriteLramByte(iop_base, |
10928 | (ushort) (sg_q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
10929 | QS_FREE0x00); |
10930 | } |
10931 | n_q_used = sg_queue_cnt + 1; |
10932 | AscPutVarDoneQTail(iop_base, sg_list_qp)AscWriteLramWord((iop_base), (ushort)0x005A, sg_list_qp); |
10933 | } |
10934 | if (asc_dvc->queue_full_or_busy & target_id) { |
10935 | cur_target_qng = AscReadLramByte(iop_base, |
10936 | (ushort) ((ushort) ASC_QADR_BEG(0x4000) + (ushort) scsiq->d2.target_ix)); |
10937 | if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) { |
10938 | scsi_busy = AscReadLramByte(iop_base, |
10939 | (ushort) ASCV_SCSIBUSY_B(ushort)0x004B); |
10940 | scsi_busy &= ~target_id; |
10941 | AscWriteLramByte(iop_base, |
10942 | (ushort) ASCV_SCSIBUSY_B(ushort)0x004B, scsi_busy); |
10943 | asc_dvc->queue_full_or_busy &= ~target_id; |
10944 | } |
10945 | } |
10946 | if (asc_dvc->cur_total_qng >= n_q_used) { |
10947 | asc_dvc->cur_total_qng -= n_q_used; |
10948 | if (asc_dvc->cur_dvc_qng[tid_no] != 0) { |
10949 | asc_dvc->cur_dvc_qng[tid_no]--; |
10950 | } |
10951 | } else { |
10952 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG0x17); |
10953 | scsiq->d3.done_stat = QD_WITH_ERROR0x04; |
10954 | goto FATAL_ERR_QDONE; |
10955 | } |
10956 | if ((scsiq->d2.srb_ptr == 0UL) || |
10957 | ((scsiq->q_status & QS_ABORTED0x40) != 0)) { |
10958 | return (0x11); |
10959 | } else if (scsiq->q_status == QS_DONE0x80) { |
10960 | false_overrun = FALSE0; |
10961 | if (scsiq->extra_bytes != 0) { |
10962 | scsiq->remain_bytes += (ulong) scsiq->extra_bytes; |
10963 | } |
10964 | if (scsiq->d3.done_stat == QD_WITH_ERROR0x04) { |
10965 | if (scsiq->d3.host_stat == QHSTA_M_DATA_OVER_RUN0x12) { |
10966 | if ((scsiq->cntl & (QC_DATA_IN0x08 | QC_DATA_OUT0x10)) == 0) { |
10967 | scsiq->d3.done_stat = QD_NO_ERROR0x01; |
10968 | scsiq->d3.host_stat = QHSTA_NO_ERROR0x00; |
10969 | } else if (false_overrun) { |
10970 | scsiq->d3.done_stat = QD_NO_ERROR0x01; |
10971 | scsiq->d3.host_stat = QHSTA_NO_ERROR0x00; |
10972 | } |
10973 | } else if (scsiq->d3.host_stat == |
10974 | QHSTA_M_HUNG_REQ_SCSI_BUS_RESET0x48) { |
10975 | AscStopChip(iop_base); |
10976 | AscSetChipControl(iop_base,((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar) ((uchar)0x40 | (uchar )0x20))),(((iop_base)+(0x0F)))) : __outb((((uchar) ((uchar)0x40 | (uchar)0x20))),(((iop_base)+(0x0F))))) |
10977 | (uchar) (CC_SCSI_RESET | CC_HALT))((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar) ((uchar)0x40 | (uchar )0x20))),(((iop_base)+(0x0F)))) : __outb((((uchar) ((uchar)0x40 | (uchar)0x20))),(((iop_base)+(0x0F))))); |
10978 | DvcDelayNanoSecond(asc_dvc, 60000); |
10979 | AscSetChipControl(iop_base, CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x20)),(((iop_base)+( 0x0F)))) : __outb((((uchar)0x20)),(((iop_base)+(0x0F))))); |
10980 | AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x1000)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x1000)),(((iop_base )+(0x0E))))); |
10981 | AscSetChipStatus(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc(((0)),(((iop_base)+(0x0E)))) : __outw(((0)),(((iop_base)+(0x0E))))); |
10982 | AscSetChipControl(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc(((0)),(((iop_base)+(0x0F)))) : __outb(((0)),(((iop_base)+(0x0F))))); |
10983 | } |
10984 | } |
10985 | if ((scsiq->cntl & QC_NO_CALLBACK0x01) == 0) { |
10986 | (*asc_isr_callback) (asc_dvc, scsiq); |
10987 | } else { |
10988 | if ((AscReadLramByte(iop_base, |
10989 | (ushort) (q_addr + (ushort) ASC_SCSIQ_CDB_BEG36)) == |
10990 | SCSICMD_StartStopUnit0x1B)) { |
10991 | asc_dvc->unit_not_ready &= ~target_id; |
10992 | if (scsiq->d3.done_stat != QD_NO_ERROR0x01) { |
10993 | asc_dvc->start_motor &= ~target_id; |
10994 | } |
10995 | } |
10996 | } |
10997 | return (1); |
10998 | } else { |
10999 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS0x0D); |
11000 | FATAL_ERR_QDONE: |
11001 | if ((scsiq->cntl & QC_NO_CALLBACK0x01) == 0) { |
11002 | (*asc_isr_callback) (asc_dvc, scsiq); |
11003 | } |
11004 | return (0x80); |
11005 | } |
11006 | } |
11007 | return (0); |
11008 | } |
11009 | |
11010 | STATICstatic int |
11011 | AscISR( |
11012 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
11013 | ) |
11014 | { |
11015 | ASC_CS_TYPEunsigned short chipstat; |
11016 | PortAddrunsigned short iop_base; |
11017 | ushort saved_ram_addr; |
11018 | uchar ctrl_reg; |
11019 | uchar saved_ctrl_reg; |
11020 | int int_pending; |
11021 | int status; |
11022 | uchar host_flag; |
11023 | |
11024 | iop_base = asc_dvc->iop_base; |
11025 | int_pending = FALSE0; |
11026 | if (((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC0x0020) == 0) |
11027 | || (asc_dvc->isr_callback == 0) |
11028 | ) { |
11029 | return (ERR(-1)); |
11030 | } |
11031 | if (asc_dvc->in_critical_cnt != 0) { |
11032 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL0x1C); |
11033 | return (ERR(-1)); |
11034 | } |
11035 | if (asc_dvc->is_in_int) { |
11036 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY0x1A); |
11037 | return (ERR(-1)); |
11038 | } |
11039 | asc_dvc->is_in_int = TRUE1; |
11040 | ctrl_reg = AscGetChipControl(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x0F))) && ((iop_base)+(0x0F)) < 256) ? __inbc((iop_base)+(0x0F)) : __inb ((iop_base)+(0x0F))); |
11041 | saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET(uchar)0x40 | CC_CHIP_RESET(uchar)0x80 | |
11042 | CC_SINGLE_STEP(uchar)0x10 | CC_DIAG(uchar)0x01 | CC_TEST(uchar)0x04)); |
11043 | chipstat = AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))); |
11044 | if (chipstat & CSW_SCSI_RESET_LATCH(unsigned short)0x0002) { |
11045 | if (!(asc_dvc->bus_type & (ASC_IS_VL(0x0040) | ASC_IS_EISA(0x0002)))) { |
11046 | int_pending = TRUE1; |
11047 | asc_dvc->sdtr_done = 0; |
11048 | saved_ctrl_reg &= (uchar) (~CC_HALT(uchar)0x20); |
11049 | while (AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_SCSI_RESET_ACTIVE(unsigned short)0x0008) ; |
11050 | AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT))((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc(((((uchar)0x80 | (uchar)0x20)) ),(((iop_base)+(0x0F)))) : __outb(((((uchar)0x80 | (uchar)0x20 ))),(((iop_base)+(0x0F))))); |
11051 | AscSetChipControl(iop_base, CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x20)),(((iop_base)+( 0x0F)))) : __outb((((uchar)0x20)),(((iop_base)+(0x0F))))); |
11052 | AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x1000)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x1000)),(((iop_base )+(0x0E))))); |
11053 | AscSetChipStatus(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc(((0)),(((iop_base)+(0x0E)))) : __outw(((0)),(((iop_base)+(0x0E))))); |
11054 | chipstat = AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))); |
11055 | } |
11056 | } |
11057 | saved_ram_addr = AscGetChipLramAddr(iop_base)(ushort)((__builtin_constant_p(((unsigned short)((iop_base)+( 0x0A)))) && ((unsigned short)((iop_base)+(0x0A))) < 256) ? __inwc((unsigned short)((iop_base)+(0x0A))) : __inw(( unsigned short)((iop_base)+(0x0A)))); |
11058 | host_flag = AscReadLramByte(iop_base, |
11059 | ASCV_HOST_FLAG_B(ushort)0x005D) & (uchar) (~ASC_HOST_FLAG_IN_ISR0x01); |
11060 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B(ushort)0x005D, |
11061 | (uchar) (host_flag | (uchar) ASC_HOST_FLAG_IN_ISR0x01)); |
11062 | if ((chipstat & CSW_INT_PENDING(unsigned short)0x0001) |
11063 | || (int_pending) |
11064 | ) { |
11065 | AscAckInterrupt(iop_base); |
11066 | int_pending = TRUE1; |
11067 | if ((chipstat & CSW_HALTED(unsigned short)0x0010) && |
11068 | (ctrl_reg & CC_SINGLE_STEP(uchar)0x10)) { |
11069 | if (AscIsrChipHalted(asc_dvc) == ERR(-1)) { |
11070 | goto ISR_REPORT_QDONE_FATAL_ERROR; |
11071 | } else { |
11072 | saved_ctrl_reg &= (uchar) (~CC_HALT(uchar)0x20); |
11073 | } |
11074 | } else { |
11075 | ISR_REPORT_QDONE_FATAL_ERROR: |
11076 | if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q(ushort)0x0080) != 0) { |
11077 | while (((status = AscIsrQDone(asc_dvc)) & 0x01) != 0) { |
11078 | } |
11079 | } else { |
11080 | do { |
11081 | if ((status = AscIsrQDone(asc_dvc)) == 1) { |
11082 | break; |
11083 | } |
11084 | } while (status == 0x11); |
11085 | } |
11086 | if ((status & 0x80) != 0) |
11087 | int_pending = ERR(-1); |
11088 | } |
11089 | } |
11090 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B(ushort)0x005D, host_flag); |
11091 | AscSetChipLramAddr(iop_base, saved_ram_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((saved_ram_addr)),(((unsigned short)((iop_base)+ (0x0A))))) : __outw(((saved_ram_addr)),(((unsigned short)((iop_base )+(0x0A)))))); |
11092 | AscSetChipControl(iop_base, saved_ctrl_reg)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc(((saved_ctrl_reg)),(((iop_base )+(0x0F)))) : __outb(((saved_ctrl_reg)),(((iop_base)+(0x0F))) )); |
11093 | asc_dvc->is_in_int = FALSE0; |
11094 | return (int_pending); |
11095 | } |
11096 | |
11097 | STATICstatic uchar _asc_mcode_buf[] ASC_INITDATA = |
11098 | { |
11099 | 0x01, 0x03, 0x01, 0x19, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
11100 | 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
11101 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
11102 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
11103 | 0x00, 0x00, 0x00, 0x00, 0x91, 0x10, 0x0A, 0x05, 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, |
11104 | 0x00, 0x00, 0x00, 0x00, 0xFF, 0x80, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
11105 | 0x00, 0x00, 0x00, 0x23, 0x00, 0x24, 0x00, 0x00, 0x00, 0x07, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, |
11106 | 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE2, 0x88, 0x00, 0x00, 0x00, 0x00, |
11107 | 0x80, 0x73, 0x48, 0x04, 0x36, 0x00, 0x00, 0xA2, 0xC2, 0x00, 0x80, 0x73, 0x03, 0x23, 0x36, 0x40, |
11108 | 0xB6, 0x00, 0x36, 0x00, 0x05, 0xD6, 0x0C, 0xD2, 0x12, 0xDA, 0x00, 0xA2, 0xC2, 0x00, 0x92, 0x80, |
11109 | 0x1E, 0x98, 0x50, 0x00, 0xF5, 0x00, 0x48, 0x98, 0xDF, 0x23, 0x36, 0x60, 0xB6, 0x00, 0x92, 0x80, |
11110 | 0x4F, 0x00, 0xF5, 0x00, 0x48, 0x98, 0xEF, 0x23, 0x36, 0x60, 0xB6, 0x00, 0x92, 0x80, 0x80, 0x62, |
11111 | 0x92, 0x80, 0x00, 0x46, 0x17, 0xEE, 0x13, 0xEA, 0x02, 0x01, 0x09, 0xD8, 0xCD, 0x04, 0x4D, 0x00, |
11112 | 0x00, 0xA3, 0xD6, 0x00, 0xA6, 0x97, 0x7F, 0x23, 0x04, 0x61, 0x84, 0x01, 0xE6, 0x84, 0xD2, 0xC1, |
11113 | 0x80, 0x73, 0xCD, 0x04, 0x4D, 0x00, 0x00, 0xA3, 0xE2, 0x01, 0xA6, 0x97, 0xCE, 0x81, 0x00, 0x33, |
11114 | 0x02, 0x00, 0xC0, 0x88, 0x80, 0x73, 0x80, 0x77, 0x00, 0x01, 0x01, 0xA1, 0x02, 0x01, 0x4F, 0x00, |
11115 | 0x84, 0x97, 0x07, 0xA6, 0x0C, 0x01, 0x00, 0x33, 0x03, 0x00, 0xC0, 0x88, 0x03, 0x03, 0x03, 0xDE, |
11116 | 0x00, 0x33, 0x05, 0x00, 0xC0, 0x88, 0xCE, 0x00, 0x69, 0x60, 0xCE, 0x00, 0x02, 0x03, 0x4A, 0x60, |
11117 | 0x00, 0xA2, 0x80, 0x01, 0x80, 0x63, 0x07, 0xA6, 0x2C, 0x01, 0x80, 0x81, 0x03, 0x03, 0x80, 0x63, |
11118 | 0xE2, 0x00, 0x07, 0xA6, 0x3C, 0x01, 0x00, 0x33, 0x04, 0x00, 0xC0, 0x88, 0x03, 0x07, 0x02, 0x01, |
11119 | 0x04, 0xCA, 0x0D, 0x23, 0x68, 0x98, 0x4D, 0x04, 0x04, 0x85, 0x05, 0xD8, 0x0D, 0x23, 0x68, 0x98, |
11120 | 0xCD, 0x04, 0x15, 0x23, 0xF6, 0x88, 0xFB, 0x23, 0x02, 0x61, 0x82, 0x01, 0x80, 0x63, 0x02, 0x03, |
11121 | 0x06, 0xA3, 0x6A, 0x01, 0x00, 0x33, 0x0A, 0x00, 0xC0, 0x88, 0x4E, 0x00, 0x07, 0xA3, 0x76, 0x01, |
11122 | 0x00, 0x33, 0x0B, 0x00, 0xC0, 0x88, 0xCD, 0x04, 0x36, 0x2D, 0x00, 0x33, 0x1A, 0x00, 0xC0, 0x88, |
11123 | 0x50, 0x04, 0x90, 0x81, 0x06, 0xAB, 0x8A, 0x01, 0x90, 0x81, 0x4E, 0x00, 0x07, 0xA3, 0x9A, 0x01, |
11124 | 0x50, 0x00, 0x00, 0xA3, 0x44, 0x01, 0x00, 0x05, 0x84, 0x81, 0x46, 0x97, 0x02, 0x01, 0x05, 0xC6, |
11125 | 0x04, 0x23, 0xA0, 0x01, 0x15, 0x23, 0xA1, 0x01, 0xC6, 0x81, 0xFD, 0x23, 0x02, 0x61, 0x82, 0x01, |
11126 | 0x0A, 0xDA, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA0, 0xBC, 0x01, 0x80, 0x63, 0xCD, 0x04, 0x36, 0x2D, |
11127 | 0x00, 0x33, 0x1B, 0x00, 0xC0, 0x88, 0x06, 0x23, 0x68, 0x98, 0xCD, 0x04, 0xE6, 0x84, 0x06, 0x01, |
11128 | 0x00, 0xA2, 0xDC, 0x01, 0x57, 0x60, 0x00, 0xA0, 0xE2, 0x01, 0xE6, 0x84, 0x80, 0x23, 0xA0, 0x01, |
11129 | 0xE6, 0x84, 0x80, 0x73, 0x4B, 0x00, 0x06, 0x61, 0x00, 0xA2, 0x08, 0x02, 0x04, 0x01, 0x0C, 0xDE, |
11130 | 0x02, 0x01, 0x03, 0xCC, 0x4F, 0x00, 0x84, 0x97, 0x04, 0x82, 0x08, 0x23, 0x02, 0x41, 0x82, 0x01, |
11131 | 0x4F, 0x00, 0x62, 0x97, 0x48, 0x04, 0x84, 0x80, 0xF0, 0x97, 0x00, 0x46, 0x56, 0x00, 0x03, 0xC0, |
11132 | 0x01, 0x23, 0xE8, 0x00, 0x81, 0x73, 0x06, 0x29, 0x03, 0x42, 0x06, 0xE2, 0x03, 0xEE, 0x67, 0xEB, |
11133 | 0x11, 0x23, 0xF6, 0x88, 0x04, 0x98, 0xF4, 0x80, 0x80, 0x73, 0x80, 0x77, 0x07, 0xA4, 0x32, 0x02, |
11134 | 0x7C, 0x95, 0x06, 0xA6, 0x3C, 0x02, 0x03, 0xA6, 0x4C, 0x04, 0xC0, 0x88, 0x04, 0x01, 0x03, 0xD8, |
11135 | 0xB2, 0x98, 0x6A, 0x96, 0x4E, 0x82, 0xFE, 0x95, 0x80, 0x67, 0x83, 0x03, 0x80, 0x63, 0xB6, 0x2D, |
11136 | 0x02, 0xA6, 0x78, 0x02, 0x07, 0xA6, 0x66, 0x02, 0x06, 0xA6, 0x6A, 0x02, 0x03, 0xA6, 0x6E, 0x02, |
11137 | 0x00, 0x33, 0x10, 0x00, 0xC0, 0x88, 0x7C, 0x95, 0x50, 0x82, 0x60, 0x96, 0x50, 0x82, 0x04, 0x23, |
11138 | 0xA0, 0x01, 0x14, 0x23, 0xA1, 0x01, 0x3C, 0x84, 0x04, 0x01, 0x0C, 0xDC, 0xE0, 0x23, 0x25, 0x61, |
11139 | 0xEF, 0x00, 0x14, 0x01, 0x4F, 0x04, 0xA8, 0x01, 0x6F, 0x00, 0xA5, 0x01, 0x03, 0x23, 0xA4, 0x01, |
11140 | 0x06, 0x23, 0x9C, 0x01, 0x24, 0x2B, 0x1C, 0x01, 0x02, 0xA6, 0xB6, 0x02, 0x07, 0xA6, 0x66, 0x02, |
11141 | 0x06, 0xA6, 0x6A, 0x02, 0x03, 0xA6, 0x20, 0x04, 0x01, 0xA6, 0xC0, 0x02, 0x00, 0xA6, 0xC0, 0x02, |
11142 | 0x00, 0x33, 0x12, 0x00, 0xC0, 0x88, 0x00, 0x0E, 0x80, 0x63, 0x00, 0x43, 0x00, 0xA0, 0x98, 0x02, |
11143 | 0x4D, 0x04, 0x04, 0x01, 0x0B, 0xDC, 0xE7, 0x23, 0x04, 0x61, 0x84, 0x01, 0x10, 0x31, 0x12, 0x35, |
11144 | 0x14, 0x01, 0xEC, 0x00, 0x6C, 0x38, 0x00, 0x3F, 0x00, 0x00, 0xF6, 0x82, 0x18, 0x23, 0x04, 0x61, |
11145 | 0x18, 0xA0, 0xEE, 0x02, 0x04, 0x01, 0x9C, 0xC8, 0x00, 0x33, 0x1F, 0x00, 0xC0, 0x88, 0x08, 0x31, |
11146 | 0x0A, 0x35, 0x0C, 0x39, 0x0E, 0x3D, 0x7E, 0x98, 0xB6, 0x2D, 0x01, 0xA6, 0x20, 0x03, 0x00, 0xA6, |
11147 | 0x20, 0x03, 0x07, 0xA6, 0x18, 0x03, 0x06, 0xA6, 0x1C, 0x03, 0x03, 0xA6, 0x20, 0x04, 0x02, 0xA6, |
11148 | 0x78, 0x02, 0x00, 0x33, 0x33, 0x00, 0xC0, 0x88, 0x7C, 0x95, 0xFA, 0x82, 0x60, 0x96, 0xFA, 0x82, |
11149 | 0x82, 0x98, 0x80, 0x42, 0x7E, 0x98, 0x60, 0xE4, 0x04, 0x01, 0x29, 0xC8, 0x31, 0x05, 0x07, 0x01, |
11150 | 0x00, 0xA2, 0x60, 0x03, 0x00, 0x43, 0x87, 0x01, 0x05, 0x05, 0x86, 0x98, 0x7E, 0x98, 0x00, 0xA6, |
11151 | 0x22, 0x03, 0x07, 0xA6, 0x58, 0x03, 0x03, 0xA6, 0x3C, 0x04, 0x06, 0xA6, 0x5C, 0x03, 0x01, 0xA6, |
11152 | 0x22, 0x03, 0x00, 0x33, 0x25, 0x00, 0xC0, 0x88, 0x7C, 0x95, 0x3E, 0x83, 0x60, 0x96, 0x3E, 0x83, |
11153 | 0x04, 0x01, 0x0C, 0xCE, 0x03, 0xC8, 0x00, 0x33, 0x42, 0x00, 0xC0, 0x88, 0x00, 0x01, 0x05, 0x05, |
11154 | 0xFF, 0xA2, 0x7E, 0x03, 0xB1, 0x01, 0x08, 0x23, 0xB2, 0x01, 0x3A, 0x83, 0x05, 0x05, 0x15, 0x01, |
11155 | 0x00, 0xA2, 0x9E, 0x03, 0xEC, 0x00, 0x6E, 0x00, 0x95, 0x01, 0x6C, 0x38, 0x00, 0x3F, 0x00, 0x00, |
11156 | 0x01, 0xA6, 0x9A, 0x03, 0x00, 0xA6, 0x9A, 0x03, 0x12, 0x84, 0x80, 0x42, 0x7E, 0x98, 0x01, 0xA6, |
11157 | 0xA8, 0x03, 0x00, 0xA6, 0xC0, 0x03, 0x12, 0x84, 0xA6, 0x98, 0x80, 0x42, 0x01, 0xA6, 0xA8, 0x03, |
11158 | 0x07, 0xA6, 0xB6, 0x03, 0xD8, 0x83, 0x7C, 0x95, 0xAC, 0x83, 0x00, 0x33, 0x2F, 0x00, 0xC0, 0x88, |
11159 | 0xA6, 0x98, 0x80, 0x42, 0x00, 0xA6, 0xC0, 0x03, 0x07, 0xA6, 0xCE, 0x03, 0xD8, 0x83, 0x7C, 0x95, |
11160 | 0xC4, 0x83, 0x00, 0x33, 0x26, 0x00, 0xC0, 0x88, 0x38, 0x2B, 0x80, 0x32, 0x80, 0x36, 0x04, 0x23, |
11161 | 0xA0, 0x01, 0x12, 0x23, 0xA1, 0x01, 0x12, 0x84, 0x06, 0xF0, 0x06, 0xA4, 0xF6, 0x03, 0x80, 0x6B, |
11162 | 0x05, 0x23, 0x83, 0x03, 0x80, 0x63, 0x03, 0xA6, 0x10, 0x04, 0x07, 0xA6, 0x08, 0x04, 0x06, 0xA6, |
11163 | 0x0C, 0x04, 0x00, 0x33, 0x17, 0x00, 0xC0, 0x88, 0x7C, 0x95, 0xF6, 0x83, 0x60, 0x96, 0xF6, 0x83, |
11164 | 0x20, 0x84, 0x06, 0xF0, 0x06, 0xA4, 0x20, 0x04, 0x80, 0x6B, 0x05, 0x23, 0x83, 0x03, 0x80, 0x63, |
11165 | 0xB6, 0x2D, 0x03, 0xA6, 0x3C, 0x04, 0x07, 0xA6, 0x34, 0x04, 0x06, 0xA6, 0x38, 0x04, 0x00, 0x33, |
11166 | 0x30, 0x00, 0xC0, 0x88, 0x7C, 0x95, 0x20, 0x84, 0x60, 0x96, 0x20, 0x84, 0x1D, 0x01, 0x06, 0xCC, |
11167 | 0x00, 0x33, 0x00, 0x84, 0xC0, 0x20, 0x00, 0x23, 0xEA, 0x00, 0x81, 0x62, 0xA2, 0x0D, 0x80, 0x63, |
11168 | 0x07, 0xA6, 0x5A, 0x04, 0x00, 0x33, 0x18, 0x00, 0xC0, 0x88, 0x03, 0x03, 0x80, 0x63, 0xA3, 0x01, |
11169 | 0x07, 0xA4, 0x64, 0x04, 0x23, 0x01, 0x00, 0xA2, 0x86, 0x04, 0x0A, 0xA0, 0x76, 0x04, 0xE0, 0x00, |
11170 | 0x00, 0x33, 0x1D, 0x00, 0xC0, 0x88, 0x0B, 0xA0, 0x82, 0x04, 0xE0, 0x00, 0x00, 0x33, 0x1E, 0x00, |
11171 | 0xC0, 0x88, 0x42, 0x23, 0xF6, 0x88, 0x00, 0x23, 0x22, 0xA3, 0xE6, 0x04, 0x08, 0x23, 0x22, 0xA3, |
11172 | 0xA2, 0x04, 0x28, 0x23, 0x22, 0xA3, 0xAE, 0x04, 0x02, 0x23, 0x22, 0xA3, 0xC4, 0x04, 0x42, 0x23, |
11173 | 0xF6, 0x88, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA0, 0xAE, 0x04, 0x45, 0x23, 0xF6, 0x88, 0x04, 0x98, |
11174 | 0x00, 0xA2, 0xC0, 0x04, 0xB2, 0x98, 0x00, 0x33, 0x00, 0x82, 0xC0, 0x20, 0x81, 0x62, 0xF0, 0x81, |
11175 | 0x47, 0x23, 0xF6, 0x88, 0x04, 0x01, 0x0B, 0xDE, 0x04, 0x98, 0xB2, 0x98, 0x00, 0x33, 0x00, 0x81, |
11176 | 0xC0, 0x20, 0x81, 0x62, 0x14, 0x01, 0x00, 0xA0, 0x08, 0x02, 0x43, 0x23, 0xF6, 0x88, 0x04, 0x23, |
11177 | 0xA0, 0x01, 0x44, 0x23, 0xA1, 0x01, 0x80, 0x73, 0x4D, 0x00, 0x03, 0xA3, 0xF4, 0x04, 0x00, 0x33, |
11178 | 0x27, 0x00, 0xC0, 0x88, 0x04, 0x01, 0x04, 0xDC, 0x02, 0x23, 0xA2, 0x01, 0x04, 0x23, 0xA0, 0x01, |
11179 | 0x04, 0x98, 0x26, 0x95, 0x4B, 0x00, 0xF6, 0x00, 0x4F, 0x04, 0x4F, 0x00, 0x00, 0xA3, 0x22, 0x05, |
11180 | 0x00, 0x05, 0x76, 0x00, 0x06, 0x61, 0x00, 0xA2, 0x1C, 0x05, 0x0A, 0x85, 0x46, 0x97, 0xCD, 0x04, |
11181 | 0x24, 0x85, 0x48, 0x04, 0x84, 0x80, 0x02, 0x01, 0x03, 0xDA, 0x80, 0x23, 0x82, 0x01, 0x34, 0x85, |
11182 | 0x02, 0x23, 0xA0, 0x01, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA2, 0x40, 0x05, 0x1D, 0x01, 0x04, 0xD6, |
11183 | 0xFF, 0x23, 0x86, 0x41, 0x4B, 0x60, 0xCB, 0x00, 0xFF, 0x23, 0x80, 0x01, 0x49, 0x00, 0x81, 0x01, |
11184 | 0x04, 0x01, 0x02, 0xC8, 0x30, 0x01, 0x80, 0x01, 0xF7, 0x04, 0x03, 0x01, 0x49, 0x04, 0x80, 0x01, |
11185 | 0xC9, 0x00, 0x00, 0x05, 0x00, 0x01, 0xFF, 0xA0, 0x60, 0x05, 0x77, 0x04, 0x01, 0x23, 0xEA, 0x00, |
11186 | 0x5D, 0x00, 0xFE, 0xC7, 0x00, 0x62, 0x00, 0x23, 0xEA, 0x00, 0x00, 0x63, 0x07, 0xA4, 0xF8, 0x05, |
11187 | 0x03, 0x03, 0x02, 0xA0, 0x8E, 0x05, 0xF4, 0x85, 0x00, 0x33, 0x2D, 0x00, 0xC0, 0x88, 0x04, 0xA0, |
11188 | 0xB8, 0x05, 0x80, 0x63, 0x00, 0x23, 0xDF, 0x00, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA2, 0xA4, 0x05, |
11189 | 0x1D, 0x01, 0x06, 0xD6, 0x02, 0x23, 0x02, 0x41, 0x82, 0x01, 0x50, 0x00, 0x62, 0x97, 0x04, 0x85, |
11190 | 0x04, 0x23, 0x02, 0x41, 0x82, 0x01, 0x04, 0x85, 0x08, 0xA0, 0xBE, 0x05, 0xF4, 0x85, 0x03, 0xA0, |
11191 | 0xC4, 0x05, 0xF4, 0x85, 0x01, 0xA0, 0xCE, 0x05, 0x88, 0x00, 0x80, 0x63, 0xCC, 0x86, 0x07, 0xA0, |
11192 | 0xEE, 0x05, 0x5F, 0x00, 0x00, 0x2B, 0xDF, 0x08, 0x00, 0xA2, 0xE6, 0x05, 0x80, 0x67, 0x80, 0x63, |
11193 | 0x01, 0xA2, 0x7A, 0x06, 0x7C, 0x85, 0x06, 0x23, 0x68, 0x98, 0x48, 0x23, 0xF6, 0x88, 0x07, 0x23, |
11194 | 0x80, 0x00, 0x06, 0x87, 0x80, 0x63, 0x7C, 0x85, 0x00, 0x23, 0xDF, 0x00, 0x00, 0x63, 0x4A, 0x00, |
11195 | 0x06, 0x61, 0x00, 0xA2, 0x36, 0x06, 0x1D, 0x01, 0x16, 0xD4, 0xC0, 0x23, 0x07, 0x41, 0x83, 0x03, |
11196 | 0x80, 0x63, 0x06, 0xA6, 0x1C, 0x06, 0x00, 0x33, 0x37, 0x00, 0xC0, 0x88, 0x1D, 0x01, 0x01, 0xD6, |
11197 | 0x20, 0x23, 0x63, 0x60, 0x83, 0x03, 0x80, 0x63, 0x02, 0x23, 0xDF, 0x00, 0x07, 0xA6, 0x7C, 0x05, |
11198 | 0xEF, 0x04, 0x6F, 0x00, 0x00, 0x63, 0x4B, 0x00, 0x06, 0x41, 0xCB, 0x00, 0x52, 0x00, 0x06, 0x61, |
11199 | 0x00, 0xA2, 0x4E, 0x06, 0x1D, 0x01, 0x03, 0xCA, 0xC0, 0x23, 0x07, 0x41, 0x00, 0x63, 0x1D, 0x01, |
11200 | 0x04, 0xCC, 0x00, 0x33, 0x00, 0x83, 0xC0, 0x20, 0x81, 0x62, 0x80, 0x23, 0x07, 0x41, 0x00, 0x63, |
11201 | 0x80, 0x67, 0x08, 0x23, 0x83, 0x03, 0x80, 0x63, 0x00, 0x63, 0x01, 0x23, 0xDF, 0x00, 0x06, 0xA6, |
11202 | 0x84, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x80, 0x67, 0x80, 0x63, 0x00, 0x33, 0x00, 0x40, 0xC0, 0x20, |
11203 | 0x81, 0x62, 0x00, 0x63, 0x00, 0x00, 0xFE, 0x95, 0x83, 0x03, 0x80, 0x63, 0x06, 0xA6, 0x94, 0x06, |
11204 | 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x00, 0x01, 0xA0, 0x14, 0x07, 0x00, 0x2B, 0x40, 0x0E, 0x80, 0x63, |
11205 | 0x01, 0x00, 0x06, 0xA6, 0xAA, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x40, 0x0E, 0x80, 0x63, 0x00, 0x43, |
11206 | 0x00, 0xA0, 0xA2, 0x06, 0x06, 0xA6, 0xBC, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x80, 0x67, 0x40, 0x0E, |
11207 | 0x80, 0x63, 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x23, 0xDF, 0x00, 0x00, 0x63, 0x07, 0xA6, 0xD6, 0x06, |
11208 | 0x00, 0x33, 0x2A, 0x00, 0xC0, 0x88, 0x03, 0x03, 0x80, 0x63, 0x89, 0x00, 0x0A, 0x2B, 0x07, 0xA6, |
11209 | 0xE8, 0x06, 0x00, 0x33, 0x29, 0x00, 0xC0, 0x88, 0x00, 0x43, 0x00, 0xA2, 0xF4, 0x06, 0xC0, 0x0E, |
11210 | 0x80, 0x63, 0xDE, 0x86, 0xC0, 0x0E, 0x00, 0x33, 0x00, 0x80, 0xC0, 0x20, 0x81, 0x62, 0x04, 0x01, |
11211 | 0x02, 0xDA, 0x80, 0x63, 0x7C, 0x85, 0x80, 0x7B, 0x80, 0x63, 0x06, 0xA6, 0x8C, 0x06, 0x00, 0x33, |
11212 | 0x2C, 0x00, 0xC0, 0x88, 0x0C, 0xA2, 0x2E, 0x07, 0xFE, 0x95, 0x83, 0x03, 0x80, 0x63, 0x06, 0xA6, |
11213 | 0x2C, 0x07, 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x33, 0x3D, 0x00, 0xC0, 0x88, 0x00, 0x00, 0x80, 0x67, |
11214 | 0x83, 0x03, 0x80, 0x63, 0x0C, 0xA0, 0x44, 0x07, 0x07, 0xA6, 0x7C, 0x05, 0xBF, 0x23, 0x04, 0x61, |
11215 | 0x84, 0x01, 0xE6, 0x84, 0x00, 0x63, 0xF0, 0x04, 0x01, 0x01, 0xF1, 0x00, 0x00, 0x01, 0xF2, 0x00, |
11216 | 0x01, 0x05, 0x80, 0x01, 0x72, 0x04, 0x71, 0x00, 0x81, 0x01, 0x70, 0x04, 0x80, 0x05, 0x81, 0x05, |
11217 | 0x00, 0x63, 0xF0, 0x04, 0xF2, 0x00, 0x72, 0x04, 0x01, 0x01, 0xF1, 0x00, 0x70, 0x00, 0x81, 0x01, |
11218 | 0x70, 0x04, 0x71, 0x00, 0x81, 0x01, 0x72, 0x00, 0x80, 0x01, 0x71, 0x04, 0x70, 0x00, 0x80, 0x01, |
11219 | 0x70, 0x04, 0x00, 0x63, 0xF0, 0x04, 0xF2, 0x00, 0x72, 0x04, 0x00, 0x01, 0xF1, 0x00, 0x70, 0x00, |
11220 | 0x80, 0x01, 0x70, 0x04, 0x71, 0x00, 0x80, 0x01, 0x72, 0x00, 0x81, 0x01, 0x71, 0x04, 0x70, 0x00, |
11221 | 0x81, 0x01, 0x70, 0x04, 0x00, 0x63, 0x00, 0x23, 0xB3, 0x01, 0x83, 0x05, 0xA3, 0x01, 0xA2, 0x01, |
11222 | 0xA1, 0x01, 0x01, 0x23, 0xA0, 0x01, 0x00, 0x01, 0xC8, 0x00, 0x03, 0xA1, 0xC4, 0x07, 0x00, 0x33, |
11223 | 0x07, 0x00, 0xC0, 0x88, 0x80, 0x05, 0x81, 0x05, 0x04, 0x01, 0x11, 0xC8, 0x48, 0x00, 0xB0, 0x01, |
11224 | 0xB1, 0x01, 0x08, 0x23, 0xB2, 0x01, 0x05, 0x01, 0x48, 0x04, 0x00, 0x43, 0x00, 0xA2, 0xE4, 0x07, |
11225 | 0x00, 0x05, 0xDA, 0x87, 0x00, 0x01, 0xC8, 0x00, 0xFF, 0x23, 0x80, 0x01, 0x05, 0x05, 0x00, 0x63, |
11226 | 0xF7, 0x04, 0x1A, 0x09, 0xF6, 0x08, 0x6E, 0x04, 0x00, 0x02, 0x80, 0x43, 0x76, 0x08, 0x80, 0x02, |
11227 | 0x77, 0x04, 0x00, 0x63, 0xF7, 0x04, 0x1A, 0x09, 0xF6, 0x08, 0x6E, 0x04, 0x00, 0x02, 0x00, 0xA0, |
11228 | 0x14, 0x08, 0x16, 0x88, 0x00, 0x43, 0x76, 0x08, 0x80, 0x02, 0x77, 0x04, 0x00, 0x63, 0xF3, 0x04, |
11229 | 0x00, 0x23, 0xF4, 0x00, 0x74, 0x00, 0x80, 0x43, 0xF4, 0x00, 0xCF, 0x40, 0x00, 0xA2, 0x44, 0x08, |
11230 | 0x74, 0x04, 0x02, 0x01, 0xF7, 0xC9, 0xF6, 0xD9, 0x00, 0x01, 0x01, 0xA1, 0x24, 0x08, 0x04, 0x98, |
11231 | 0x26, 0x95, 0x24, 0x88, 0x73, 0x04, 0x00, 0x63, 0xF3, 0x04, 0x75, 0x04, 0x5A, 0x88, 0x02, 0x01, |
11232 | 0x04, 0xD8, 0x46, 0x97, 0x04, 0x98, 0x26, 0x95, 0x4A, 0x88, 0x75, 0x00, 0x00, 0xA3, 0x64, 0x08, |
11233 | 0x00, 0x05, 0x4E, 0x88, 0x73, 0x04, 0x00, 0x63, 0x80, 0x7B, 0x80, 0x63, 0x06, 0xA6, 0x76, 0x08, |
11234 | 0x00, 0x33, 0x3E, 0x00, 0xC0, 0x88, 0x80, 0x67, 0x83, 0x03, 0x80, 0x63, 0x00, 0x63, 0x38, 0x2B, |
11235 | 0x9C, 0x88, 0x38, 0x2B, 0x92, 0x88, 0x32, 0x09, 0x31, 0x05, 0x92, 0x98, 0x05, 0x05, 0xB2, 0x09, |
11236 | 0x00, 0x63, 0x00, 0x32, 0x00, 0x36, 0x00, 0x3A, 0x00, 0x3E, 0x00, 0x63, 0x80, 0x32, 0x80, 0x36, |
11237 | 0x80, 0x3A, 0x80, 0x3E, 0x00, 0x63, 0x38, 0x2B, 0x40, 0x32, 0x40, 0x36, 0x40, 0x3A, 0x40, 0x3E, |
11238 | 0x00, 0x63, 0x5A, 0x20, 0xC9, 0x40, 0x00, 0xA0, 0xB2, 0x08, 0x5D, 0x00, 0xFE, 0xC3, 0x00, 0x63, |
11239 | 0x80, 0x73, 0xE6, 0x20, 0x02, 0x23, 0xE8, 0x00, 0x82, 0x73, 0xFF, 0xFD, 0x80, 0x73, 0x13, 0x23, |
11240 | 0xF6, 0x88, 0x66, 0x20, 0xC0, 0x20, 0x04, 0x23, 0xA0, 0x01, 0xA1, 0x23, 0xA1, 0x01, 0x81, 0x62, |
11241 | 0xE0, 0x88, 0x80, 0x73, 0x80, 0x77, 0x68, 0x00, 0x00, 0xA2, 0x80, 0x00, 0x03, 0xC2, 0xF1, 0xC7, |
11242 | 0x41, 0x23, 0xF6, 0x88, 0x11, 0x23, 0xA1, 0x01, 0x04, 0x23, 0xA0, 0x01, 0xE6, 0x84, |
11243 | }; |
11244 | |
11245 | STATICstatic ushort _asc_mcode_size ASC_INITDATA = sizeof(_asc_mcode_buf); |
11246 | STATICstatic ulong _asc_mcode_chksum ASC_INITDATA = 0x012B5442UL; |
11247 | |
11248 | #define ASC_SYN_OFFSET_ONE_DISABLE_LIST16 16 |
11249 | STATICstatic uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST16] = |
11250 | { |
11251 | SCSICMD_Inquiry0x12, |
11252 | SCSICMD_RequestSense0x03, |
11253 | SCSICMD_ReadCapacity0x25, |
11254 | SCSICMD_ReadTOC0x43, |
11255 | SCSICMD_ModeSelect60x15, |
11256 | SCSICMD_ModeSense60x1A, |
11257 | SCSICMD_ModeSelect100x55, |
11258 | SCSICMD_ModeSense100x5A, |
11259 | 0xFF, |
11260 | 0xFF, |
11261 | 0xFF, |
11262 | 0xFF, |
11263 | 0xFF, |
11264 | 0xFF, |
11265 | 0xFF, |
11266 | 0xFF |
11267 | }; |
11268 | |
11269 | STATICstatic int |
11270 | AscExeScsiQueue( |
11271 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11272 | REGregister ASC_SCSI_Q * scsiq |
11273 | ) |
11274 | { |
11275 | PortAddrunsigned short iop_base; |
11276 | int last_int_level; |
11277 | int sta; |
11278 | int n_q_required; |
11279 | int disable_syn_offset_one_fix; |
11280 | int i; |
11281 | ulong addr; |
11282 | ASC_EXE_CALLBACK asc_exe_callback; |
11283 | ushort sg_entry_cnt = 0; |
11284 | ushort sg_entry_cnt_minus_one = 0; |
11285 | uchar target_ix; |
11286 | uchar tid_no; |
11287 | uchar sdtr_data; |
11288 | uchar extra_bytes; |
11289 | uchar scsi_cmd; |
11290 | uchar disable_cmd; |
11291 | ASC_SG_HEAD *sg_head; |
11292 | ulong data_cnt; |
11293 | |
11294 | iop_base = asc_dvc->iop_base; |
11295 | sg_head = scsiq->sg_head; |
11296 | asc_exe_callback = (ASC_EXE_CALLBACK) asc_dvc->exe_callback; |
11297 | if (asc_dvc->err_code != 0) |
11298 | return (ERR(-1)); |
11299 | if (scsiq == (ASC_SCSI_Q *) 0L) { |
11300 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_SCSIQ_NULL_PTR0x1F); |
11301 | return (ERR(-1)); |
11302 | } |
11303 | scsiq->q1.q_no = 0; |
11304 | if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES0x10) == 0) { |
11305 | scsiq->q1.extra_bytes = 0; |
11306 | } |
11307 | sta = 0; |
11308 | target_ix = scsiq->q2.target_ix; |
11309 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
11310 | n_q_required = 1; |
11311 | if (scsiq->cdbptr[0] == SCSICMD_RequestSense0x03) { |
11312 | if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) { |
11313 | asc_dvc->sdtr_done &= ~scsiq->q1.target_id ; |
11314 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no)AscReadLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8)+ (ushort)tid_no)) ;; |
11315 | AscMsgOutSDTR(asc_dvc, |
11316 | asc_dvc->sdtr_period_tbl[(sdtr_data >> 4) & |
11317 | (uchar) (asc_dvc->max_sdtr_index - 1)], |
11318 | (uchar) (sdtr_data & (uchar) ASC_SYN_MAX_OFFSET0x0F)); |
11319 | scsiq->q1.cntl |= (QC_MSG_OUT0x40 | QC_URGENT0x20); |
11320 | } |
11321 | } |
11322 | last_int_level = DvcEnterCritical(); |
11323 | if (asc_dvc->in_critical_cnt != 0) { |
11324 | DvcLeaveCritical(last_int_level); |
11325 | AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY0x1B); |
11326 | return (ERR(-1)); |
11327 | } |
11328 | asc_dvc->in_critical_cnt++; |
11329 | if ((scsiq->q1.cntl & QC_SG_HEAD0x04) != 0) { |
11330 | if ((sg_entry_cnt = sg_head->entry_cnt) == 0) { |
11331 | asc_dvc->in_critical_cnt--; |
11332 | DvcLeaveCritical(last_int_level); |
11333 | return (ERR(-1)); |
11334 | } |
11335 | if (sg_entry_cnt > ASC_MAX_SG_LIST0xff) { |
11336 | return (ERR(-1)); |
11337 | } |
11338 | if (sg_entry_cnt == 1) { |
11339 | scsiq->q1.data_addr = sg_head->sg_list[0].addr; |
11340 | scsiq->q1.data_cnt = sg_head->sg_list[0].bytes; |
11341 | scsiq->q1.cntl &= ~(QC_SG_HEAD0x04 | QC_SG_SWAP_QUEUE0x02); |
11342 | } |
11343 | sg_entry_cnt_minus_one = sg_entry_cnt - 1; |
11344 | } |
11345 | scsi_cmd = scsiq->cdbptr[0]; |
11346 | disable_syn_offset_one_fix = FALSE0; |
11347 | if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) && |
11348 | !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) { |
11349 | if (scsiq->q1.cntl & QC_SG_HEAD0x04) { |
11350 | data_cnt = 0; |
11351 | for (i = 0; i < sg_entry_cnt; i++) { |
11352 | data_cnt += sg_head->sg_list[i].bytes; |
11353 | } |
11354 | } else { |
11355 | data_cnt = scsiq->q1.data_cnt; |
11356 | } |
11357 | if (data_cnt != 0UL) { |
11358 | if (data_cnt < 512UL) { |
11359 | disable_syn_offset_one_fix = TRUE1; |
11360 | } else { |
11361 | for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST16; i++) { |
11362 | disable_cmd = _syn_offset_one_disable_cmd[i]; |
11363 | if (disable_cmd == 0xFF) { |
11364 | break; |
11365 | } |
11366 | if (scsi_cmd == disable_cmd) { |
11367 | disable_syn_offset_one_fix = TRUE1; |
11368 | break; |
11369 | } |
11370 | } |
11371 | } |
11372 | } |
11373 | } |
11374 | if (disable_syn_offset_one_fix) { |
11375 | scsiq->q2.tag_code &= ~M2_QTAG_MSG_SIMPLE0x20; |
11376 | scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX0x08 | |
11377 | ASC_TAG_FLAG_DISABLE_DISCONNECT0x04); |
11378 | } else { |
11379 | scsiq->q2.tag_code &= 0x23; |
11380 | } |
11381 | if ((scsiq->q1.cntl & QC_SG_HEAD0x04) != 0) { |
11382 | if (asc_dvc->bug_fix_cntl) { |
11383 | if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB0x0001) { |
11384 | if ((scsi_cmd == SCSICMD_Read60x08) || |
11385 | (scsi_cmd == SCSICMD_Read100x28)) { |
11386 | addr = sg_head->sg_list[sg_entry_cnt_minus_one].addr + |
11387 | sg_head->sg_list[sg_entry_cnt_minus_one].bytes; |
11388 | extra_bytes = (uchar) ((ushort) addr & 0x0003); |
11389 | if ((extra_bytes != 0) && |
11390 | ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES0x10) |
11391 | == 0)) { |
11392 | scsiq->q2.tag_code |= ASC_TAG_FLAG_EXTRA_BYTES0x10; |
11393 | scsiq->q1.extra_bytes = extra_bytes; |
11394 | sg_head->sg_list[sg_entry_cnt_minus_one].bytes -= |
11395 | (ulong) extra_bytes; |
11396 | } |
11397 | } |
11398 | } |
11399 | } |
11400 | sg_head->entry_to_copy = sg_head->entry_cnt; |
11401 | n_q_required = AscSgListToQueue(sg_entry_cnt); |
11402 | if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >= |
11403 | (uint) n_q_required) || ((scsiq->q1.cntl & QC_URGENT0x20) != 0)) { |
11404 | if ((sta = AscSendScsiQueue(asc_dvc, scsiq, |
11405 | n_q_required)) == 1) { |
11406 | asc_dvc->in_critical_cnt--; |
11407 | if (asc_exe_callback != 0) { |
11408 | (*asc_exe_callback) (asc_dvc, scsiq); |
11409 | } |
11410 | DvcLeaveCritical(last_int_level); |
11411 | return (sta); |
11412 | } |
11413 | } |
11414 | } else { |
11415 | if (asc_dvc->bug_fix_cntl) { |
11416 | if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB0x0001) { |
11417 | if ((scsi_cmd == SCSICMD_Read60x08) || |
11418 | (scsi_cmd == SCSICMD_Read100x28)) { |
11419 | addr = scsiq->q1.data_addr + scsiq->q1.data_cnt; |
11420 | extra_bytes = (uchar) ((ushort) addr & 0x0003); |
11421 | if ((extra_bytes != 0) && |
11422 | ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES0x10) |
11423 | == 0)) { |
11424 | if (((ushort) scsiq->q1.data_cnt & 0x01FF) == 0) { |
11425 | scsiq->q2.tag_code |= ASC_TAG_FLAG_EXTRA_BYTES0x10; |
11426 | scsiq->q1.data_cnt -= (ulong) extra_bytes; |
11427 | scsiq->q1.extra_bytes = extra_bytes; |
11428 | } |
11429 | } |
11430 | } |
11431 | } |
11432 | } |
11433 | n_q_required = 1; |
11434 | if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) || |
11435 | ((scsiq->q1.cntl & QC_URGENT0x20) != 0)) { |
11436 | if ((sta = AscSendScsiQueue(asc_dvc, scsiq, |
11437 | n_q_required)) == 1) { |
11438 | asc_dvc->in_critical_cnt--; |
11439 | if (asc_exe_callback != 0) { |
11440 | (*asc_exe_callback) (asc_dvc, scsiq); |
11441 | } |
11442 | DvcLeaveCritical(last_int_level); |
11443 | return (sta); |
11444 | } |
11445 | } |
11446 | } |
11447 | asc_dvc->in_critical_cnt--; |
11448 | DvcLeaveCritical(last_int_level); |
11449 | return (sta); |
11450 | } |
11451 | |
11452 | STATICstatic int |
11453 | AscSendScsiQueue( |
11454 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11455 | REGregister ASC_SCSI_Q * scsiq, |
11456 | uchar n_q_required |
11457 | ) |
11458 | { |
11459 | PortAddrunsigned short iop_base; |
11460 | uchar free_q_head; |
11461 | uchar next_qp; |
11462 | uchar tid_no; |
11463 | uchar target_ix; |
11464 | int sta; |
11465 | |
11466 | iop_base = asc_dvc->iop_base; |
11467 | target_ix = scsiq->q2.target_ix; |
11468 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
11469 | sta = 0; |
11470 | free_q_head = (uchar) AscGetVarFreeQHead(iop_base)AscReadLramWord((iop_base), (ushort)0x0058); |
11471 | if (n_q_required > 1) { |
11472 | if ((next_qp = AscAllocMultipleFreeQueue(iop_base, |
11473 | free_q_head, (uchar) (n_q_required))) |
11474 | != (uchar) ASC_QLINK_END0xFF) { |
11475 | asc_dvc->last_q_shortage = 0; |
11476 | scsiq->sg_head->queue_cnt = n_q_required - 1; |
11477 | scsiq->q1.q_no = free_q_head; |
11478 | if ((sta = AscPutReadySgListQueue(asc_dvc, scsiq, |
11479 | free_q_head)) == 1) { |
11480 | AscPutVarFreeQHead(iop_base, next_qp)AscWriteLramWord((iop_base), (ushort)0x0058, next_qp); |
11481 | asc_dvc->cur_total_qng += (uchar) (n_q_required); |
11482 | asc_dvc->cur_dvc_qng[tid_no]++; |
11483 | } |
11484 | return (sta); |
11485 | } |
11486 | } else if (n_q_required == 1) { |
11487 | if ((next_qp = AscAllocFreeQueue(iop_base, |
11488 | free_q_head)) != ASC_QLINK_END0xFF) { |
11489 | scsiq->q1.q_no = free_q_head; |
11490 | if ((sta = AscPutReadyQueue(asc_dvc, scsiq, |
11491 | free_q_head)) == 1) { |
11492 | AscPutVarFreeQHead(iop_base, next_qp)AscWriteLramWord((iop_base), (ushort)0x0058, next_qp); |
11493 | asc_dvc->cur_total_qng++; |
11494 | asc_dvc->cur_dvc_qng[tid_no]++; |
11495 | } |
11496 | return (sta); |
11497 | } |
11498 | } |
11499 | return (sta); |
11500 | } |
11501 | |
11502 | STATICstatic int |
11503 | AscSgListToQueue( |
11504 | int sg_list |
11505 | ) |
11506 | { |
11507 | int n_sg_list_qs; |
11508 | |
11509 | n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q7); |
11510 | if (((sg_list - 1) % ASC_SG_LIST_PER_Q7) != 0) |
11511 | n_sg_list_qs++; |
11512 | return (n_sg_list_qs + 1); |
11513 | } |
11514 | |
11515 | |
11516 | STATICstatic uint |
11517 | AscGetNumOfFreeQueue( |
11518 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11519 | uchar target_ix, |
11520 | uchar n_qs |
11521 | ) |
11522 | { |
11523 | uint cur_used_qs; |
11524 | uint cur_free_qs; |
11525 | ASC_SCSI_BIT_ID_TYPEuchar target_id; |
11526 | uchar tid_no; |
11527 | |
11528 | target_id = ASC_TIX_TO_TARGET_ID(target_ix)(0x01 << ((target_ix) & 7)); |
11529 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
11530 | if ((asc_dvc->unit_not_ready & target_id) || |
11531 | (asc_dvc->queue_full_or_busy & target_id)) { |
11532 | return (0); |
11533 | } |
11534 | if (n_qs == 1) { |
11535 | cur_used_qs = (uint) asc_dvc->cur_total_qng + |
11536 | (uint) asc_dvc->last_q_shortage + |
11537 | (uint) ASC_MIN_FREE_Q(0x02); |
11538 | } else { |
11539 | cur_used_qs = (uint) asc_dvc->cur_total_qng + |
11540 | (uint) ASC_MIN_FREE_Q(0x02); |
11541 | } |
11542 | if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) { |
11543 | cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs; |
11544 | if (asc_dvc->cur_dvc_qng[tid_no] >= |
11545 | asc_dvc->max_dvc_qng[tid_no]) { |
11546 | return (0); |
11547 | } |
11548 | return (cur_free_qs); |
11549 | } |
11550 | if (n_qs > 1) { |
11551 | if ((n_qs > asc_dvc->last_q_shortage) && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q(0x02)))) { |
11552 | asc_dvc->last_q_shortage = n_qs; |
11553 | } |
11554 | } |
11555 | return (0); |
11556 | } |
11557 | |
11558 | STATICstatic int |
11559 | AscPutReadyQueue( |
11560 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11561 | REGregister ASC_SCSI_Q * scsiq, |
11562 | uchar q_no |
11563 | ) |
11564 | { |
11565 | ushort q_addr; |
11566 | uchar tid_no; |
11567 | uchar sdtr_data; |
11568 | uchar syn_period_ix; |
11569 | uchar syn_offset; |
11570 | PortAddrunsigned short iop_base; |
11571 | |
11572 | iop_base = asc_dvc->iop_base; |
11573 | if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) && |
11574 | ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) { |
11575 | tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix)((scsiq->q2.target_ix) & 7); |
11576 | sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no)AscReadLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8)+ (ushort)tid_no)) ;; |
11577 | syn_period_ix = (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1); |
11578 | syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET0x0F; |
11579 | AscMsgOutSDTR(asc_dvc, |
11580 | asc_dvc->sdtr_period_tbl[syn_period_ix], |
11581 | syn_offset); |
11582 | scsiq->q1.cntl |= QC_MSG_OUT0x40; |
11583 | } |
11584 | q_addr = ASC_QNO_TO_QADDR(q_no)(((0x4000))+((int)(q_no) << 6)); |
11585 | if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) { |
11586 | scsiq->q2.tag_code &= ~M2_QTAG_MSG_SIMPLE0x20; |
11587 | } |
11588 | scsiq->q1.status = QS_FREE0x00; |
11589 | AscMemWordCopyToLram(iop_base, |
11590 | (ushort) (q_addr + (ushort) ASC_SCSIQ_CDB_BEG36), |
11591 | (ushort *) scsiq->cdbptr, |
11592 | (ushort) ((ushort) scsiq->q2.cdb_len >> 1)); |
11593 | DvcPutScsiQ(iop_base, |
11594 | (ushort) (q_addr + (ushort) ASC_SCSIQ_CPY_BEG4), |
11595 | (ushort *) & scsiq->q1.cntl, |
11596 | (ushort) ((((sizeof (ASC_SCSIQ_1) + sizeof (ASC_SCSIQ_2)) / 2) - 1))); |
11597 | AscWriteLramWord(iop_base, |
11598 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
11599 | (ushort) (((ushort) scsiq->q1.q_no << 8) | (ushort) QS_READY0x01)); |
11600 | return (1); |
11601 | } |
11602 | |
11603 | STATICstatic int |
11604 | AscPutReadySgListQueue( |
11605 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11606 | REGregister ASC_SCSI_Q * scsiq, |
11607 | uchar q_no |
11608 | ) |
11609 | { |
11610 | int sta; |
11611 | int i; |
11612 | ASC_SG_HEAD *sg_head; |
11613 | ASC_SG_LIST_Q scsi_sg_q; |
11614 | ulong saved_data_addr; |
11615 | ulong saved_data_cnt; |
11616 | PortAddrunsigned short iop_base; |
11617 | ushort sg_list_dwords; |
11618 | ushort sg_index; |
11619 | ushort sg_entry_cnt; |
11620 | ushort q_addr; |
11621 | uchar next_qp; |
11622 | |
11623 | iop_base = asc_dvc->iop_base; |
11624 | sg_head = scsiq->sg_head; |
11625 | saved_data_addr = scsiq->q1.data_addr; |
11626 | saved_data_cnt = scsiq->q1.data_cnt; |
11627 | scsiq->q1.data_addr = sg_head->sg_list[0].addr; |
11628 | scsiq->q1.data_cnt = sg_head->sg_list[0].bytes; |
11629 | sg_entry_cnt = sg_head->entry_cnt - 1; |
11630 | if (sg_entry_cnt != 0) { |
11631 | scsiq->q1.cntl |= QC_SG_HEAD0x04; |
11632 | q_addr = ASC_QNO_TO_QADDR(q_no)(((0x4000))+((int)(q_no) << 6)); |
11633 | sg_index = 1; |
11634 | scsiq->q1.sg_queue_cnt = sg_head->queue_cnt; |
11635 | scsi_sg_q.sg_head_qp = q_no; |
11636 | scsi_sg_q.cntl = QCSG_SG_XFER_LIST0x02; |
11637 | for (i = 0; i < sg_head->queue_cnt; i++) { |
11638 | scsi_sg_q.seq_no = i + 1; |
11639 | if (sg_entry_cnt > ASC_SG_LIST_PER_Q7) { |
11640 | sg_list_dwords = (uchar) (ASC_SG_LIST_PER_Q7 * 2); |
11641 | sg_entry_cnt -= ASC_SG_LIST_PER_Q7; |
11642 | if (i == 0) { |
11643 | scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q7; |
11644 | scsi_sg_q.sg_cur_list_cnt = ASC_SG_LIST_PER_Q7; |
11645 | } else { |
11646 | scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q7 - 1; |
11647 | scsi_sg_q.sg_cur_list_cnt = ASC_SG_LIST_PER_Q7 - 1; |
11648 | } |
11649 | } else { |
11650 | scsi_sg_q.cntl |= QCSG_SG_XFER_END0x08; |
11651 | sg_list_dwords = sg_entry_cnt << 1; |
11652 | if (i == 0) { |
11653 | scsi_sg_q.sg_list_cnt = sg_entry_cnt; |
11654 | scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt; |
11655 | } else { |
11656 | scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1; |
11657 | scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1; |
11658 | } |
11659 | sg_entry_cnt = 0; |
11660 | } |
11661 | next_qp = AscReadLramByte(iop_base, |
11662 | (ushort) (q_addr + ASC_SCSIQ_B_FWD0)); |
11663 | scsi_sg_q.q_no = next_qp; |
11664 | q_addr = ASC_QNO_TO_QADDR(next_qp)(((0x4000))+((int)(next_qp) << 6)); |
11665 | AscMemWordCopyToLram(iop_base, |
11666 | (ushort) (q_addr + ASC_SCSIQ_SGHD_CPY_BEG2), |
11667 | (ushort *) & scsi_sg_q, |
11668 | (ushort) (sizeof (ASC_SG_LIST_Q) >> 1)); |
11669 | AscMemDWordCopyToLram(iop_base, |
11670 | (ushort) (q_addr + ASC_SGQ_LIST_BEG8), |
11671 | (ulong *) & sg_head->sg_list[sg_index], |
11672 | (ushort) sg_list_dwords); |
11673 | sg_index += ASC_SG_LIST_PER_Q7; |
11674 | } |
11675 | } else { |
11676 | scsiq->q1.cntl &= ~QC_SG_HEAD0x04; |
11677 | } |
11678 | sta = AscPutReadyQueue(asc_dvc, scsiq, q_no); |
11679 | scsiq->q1.data_addr = saved_data_addr; |
11680 | scsiq->q1.data_cnt = saved_data_cnt; |
11681 | return (sta); |
11682 | } |
11683 | |
11684 | STATICstatic int |
11685 | AscAbortSRB( |
11686 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11687 | ulong srb_ptr |
11688 | ) |
11689 | { |
11690 | int sta; |
11691 | ASC_SCSI_BIT_ID_TYPEuchar saved_unit_not_ready; |
11692 | PortAddrunsigned short iop_base; |
11693 | |
11694 | iop_base = asc_dvc->iop_base; |
11695 | sta = ERR(-1); |
11696 | saved_unit_not_ready = asc_dvc->unit_not_ready; |
11697 | asc_dvc->unit_not_ready = 0xFF; |
11698 | AscWaitISRDone(asc_dvc); |
11699 | if (AscStopQueueExe(iop_base) == 1) { |
11700 | if (AscRiscHaltedAbortSRB(asc_dvc, srb_ptr) == 1) { |
11701 | sta = 1; |
11702 | AscCleanUpBusyQueue(iop_base); |
11703 | AscStartQueueExe(iop_base); |
11704 | } else { |
11705 | sta = 0; |
11706 | AscStartQueueExe(iop_base); |
11707 | } |
11708 | } |
11709 | asc_dvc->unit_not_ready = saved_unit_not_ready; |
11710 | return (sta); |
11711 | } |
11712 | |
11713 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
11714 | STATICstatic int |
11715 | AscResetDevice( |
11716 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11717 | uchar target_ix |
11718 | ) |
11719 | { |
11720 | PortAddrunsigned short iop_base; |
11721 | int sta; |
11722 | uchar tid_no; |
11723 | |
11724 | ASC_SCSI_BIT_ID_TYPEuchar target_id; |
11725 | int i; |
11726 | ASC_SCSI_REQ_Q scsiq_buf; |
11727 | ASC_SCSI_REQ_Q *scsiq; |
11728 | uchar *buf; |
11729 | ASC_SCSI_BIT_ID_TYPEuchar saved_unit_not_ready; |
11730 | iop_base = asc_dvc->iop_base; |
11731 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
11732 | target_id = ASC_TID_TO_TARGET_ID(tid_no)(uchar)(0x01 << (tid_no)); |
11733 | saved_unit_not_ready = asc_dvc->unit_not_ready; |
11734 | asc_dvc->unit_not_ready = target_id; |
11735 | sta = ERR(-1); |
11736 | AscWaitTixISRDone(asc_dvc, target_ix); |
11737 | if (AscStopQueueExe(iop_base) == 1) { |
11738 | if (AscRiscHaltedAbortTIX(asc_dvc, target_ix) == 1) { |
11739 | AscCleanUpBusyQueue(iop_base); |
11740 | AscStartQueueExe(iop_base); |
11741 | AscWaitTixISRDone(asc_dvc, target_ix); |
11742 | sta = TRUE1; |
11743 | scsiq = (ASC_SCSI_REQ_Q *) & scsiq_buf; |
11744 | buf = (uchar *) & scsiq_buf; |
11745 | for (i = 0; i < sizeof (ASC_SCSI_REQ_Q); i++) { |
11746 | *buf++ = 0x00; |
11747 | } |
11748 | scsiq->r1.status = (uchar) QS_READY0x01; |
11749 | scsiq->r2.cdb_len = 6; |
11750 | scsiq->r2.tag_code = M2_QTAG_MSG_SIMPLE0x20; |
11751 | scsiq->r1.target_id = target_id; |
11752 | scsiq->r2.target_ix = ASC_TIDLUN_TO_IX(tid_no, 0)(uchar)((tid_no) + ((0)<<3)); |
11753 | scsiq->cdbptr = (uchar *) scsiq->cdb; |
11754 | scsiq->r1.cntl = QC_NO_CALLBACK0x01 | QC_MSG_OUT0x40 | QC_URGENT0x20; |
11755 | AscWriteLramByte(asc_dvc->iop_base, ASCV_MSGOUT_BEG0x0000, |
11756 | M1_BUS_DVC_RESET0x0C); |
11757 | asc_dvc->unit_not_ready &= ~target_id; |
11758 | asc_dvc->sdtr_done |= target_id; |
11759 | if (AscExeScsiQueue(asc_dvc, (ASC_SCSI_Q *) scsiq) |
11760 | == 1) { |
11761 | asc_dvc->unit_not_ready = target_id; |
11762 | DvcSleepMilliSecond(1000); |
11763 | _AscWaitQDone(iop_base, (ASC_SCSI_Q *) scsiq); |
11764 | if (AscStopQueueExe(iop_base) == 1) { |
11765 | AscCleanUpDiscQueue(iop_base); |
11766 | AscStartQueueExe(iop_base); |
11767 | if (asc_dvc->pci_fix_asyn_xfer & target_id) { |
11768 | AscSetRunChipSynRegAtID(iop_base, tid_no, |
11769 | ASYN_SDTR_DATA_FIX_PCI_REV_AB0x41); |
11770 | } |
11771 | AscWaitTixISRDone(asc_dvc, target_ix); |
11772 | } |
11773 | } else { |
11774 | sta = 0; |
11775 | } |
11776 | asc_dvc->sdtr_done &= ~target_id; |
11777 | } else { |
11778 | sta = ERR(-1); |
11779 | AscStartQueueExe(iop_base); |
11780 | } |
11781 | } |
11782 | asc_dvc->unit_not_ready = saved_unit_not_ready; |
11783 | return (sta); |
11784 | } |
11785 | #endif /* version >= v1.3.89 */ |
11786 | |
11787 | STATICstatic int |
11788 | AscResetSB( |
11789 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
11790 | ) |
11791 | { |
11792 | int sta; |
11793 | int i; |
11794 | PortAddrunsigned short iop_base; |
11795 | |
11796 | iop_base = asc_dvc->iop_base; |
11797 | asc_dvc->unit_not_ready = 0xFF; |
11798 | sta = TRUE1; |
11799 | AscWaitISRDone(asc_dvc); |
11800 | AscStopQueueExe(iop_base); |
11801 | asc_dvc->sdtr_done = 0; |
11802 | AscResetChipAndScsiBus(asc_dvc); |
11803 | DvcSleepMilliSecond((ulong) ((ushort) asc_dvc->scsi_reset_wait * 1000)); |
11804 | AscReInitLram(asc_dvc); |
11805 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
11806 | asc_dvc->cur_dvc_qng[i] = 0; |
11807 | if (asc_dvc->pci_fix_asyn_xfer & (ASC_SCSI_BIT_ID_TYPEuchar) (0x01 << i)) { |
11808 | AscSetChipSynRegAtID(iop_base, i, ASYN_SDTR_DATA_FIX_PCI_REV_AB0x41); |
11809 | } |
11810 | } |
11811 | asc_dvc->err_code = 0; |
11812 | AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR)((__builtin_constant_p((((iop_base)+(0x0C)))) && (((iop_base )+(0x0C))) < 256) ? __outwc(((0x0080)),(((iop_base)+(0x0C) ))) : __outw(((0x0080)),(((iop_base)+(0x0C))))); |
11813 | if (AscGetPCAddr(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x0C))) && ((iop_base)+(0x0C)) < 256) ? __inwc((iop_base)+(0x0C)) : __inw ((iop_base)+(0x0C))) != ASC_MCODE_START_ADDR0x0080) { |
11814 | sta = ERR(-1); |
11815 | } |
11816 | if (AscStartChip(iop_base) == 0) { |
11817 | sta = ERR(-1); |
11818 | } |
11819 | AscStartQueueExe(iop_base); |
11820 | asc_dvc->unit_not_ready = 0; |
11821 | asc_dvc->queue_full_or_busy = 0; |
11822 | return (sta); |
11823 | } |
11824 | |
11825 | STATICstatic int |
11826 | AscSetRunChipSynRegAtID( |
11827 | PortAddrunsigned short iop_base, |
11828 | uchar tid_no, |
11829 | uchar sdtr_data |
11830 | ) |
11831 | { |
11832 | int sta = FALSE0; |
11833 | |
11834 | if (AscHostReqRiscHalt(iop_base)) { |
11835 | sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); |
11836 | AscStartChip(iop_base); |
11837 | return (sta); |
11838 | } |
11839 | return (sta); |
11840 | } |
11841 | |
11842 | STATICstatic int |
11843 | AscSetChipSynRegAtID( |
11844 | PortAddrunsigned short iop_base, |
11845 | uchar id, |
11846 | uchar sdtr_data |
11847 | ) |
11848 | { |
11849 | ASC_SCSI_BIT_ID_TYPEuchar org_id; |
11850 | int i; |
11851 | int sta = TRUE1; |
11852 | |
11853 | AscSetBank(iop_base, 1); |
11854 | org_id = AscReadChipDvcID(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x05))) && ((iop_base)+(0x05)) < 256) ? __inbc((iop_base)+(0x05)) : __inb ((iop_base)+(0x05))); |
11855 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
11856 | if (org_id == (0x01 << i)) |
11857 | break; |
11858 | } |
11859 | org_id = i; |
11860 | AscWriteChipDvcID(iop_base, id)((__builtin_constant_p((((iop_base)+(0x05)))) && (((iop_base )+(0x05))) < 256) ? __outbc(((id)),(((iop_base)+(0x05)))) : __outb(((id)),(((iop_base)+(0x05))))); |
11861 | if (AscReadChipDvcID(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x05))) && ((iop_base)+(0x05)) < 256) ? __inbc((iop_base)+(0x05)) : __inb ((iop_base)+(0x05))) == (0x01 << id)) { |
11862 | AscSetBank(iop_base, 0); |
11863 | AscSetChipSyn(iop_base, sdtr_data)((__builtin_constant_p((((iop_base)+(0x0B)))) && (((iop_base )+(0x0B))) < 256) ? __outbc(((sdtr_data)),(((iop_base)+(0x0B )))) : __outb(((sdtr_data)),(((iop_base)+(0x0B))))); |
11864 | if (AscGetChipSyn(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x0B))) && ((iop_base)+(0x0B)) < 256) ? __inbc((iop_base)+(0x0B)) : __inb ((iop_base)+(0x0B))) != sdtr_data) { |
11865 | sta = FALSE0; |
11866 | } |
11867 | } else { |
11868 | sta = FALSE0; |
11869 | } |
11870 | AscSetBank(iop_base, 1); |
11871 | AscWriteChipDvcID(iop_base, org_id)((__builtin_constant_p((((iop_base)+(0x05)))) && (((iop_base )+(0x05))) < 256) ? __outbc(((org_id)),(((iop_base)+(0x05) ))) : __outb(((org_id)),(((iop_base)+(0x05))))); |
11872 | AscSetBank(iop_base, 0); |
11873 | return (sta); |
11874 | } |
11875 | |
11876 | STATICstatic int |
11877 | AscReInitLram( |
11878 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
11879 | ) |
11880 | { |
11881 | AscInitLram(asc_dvc); |
11882 | AscInitQLinkVar(asc_dvc); |
11883 | return (0); |
11884 | } |
11885 | |
11886 | STATICstatic ushort |
11887 | AscInitLram( |
11888 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
11889 | ) |
11890 | { |
11891 | uchar i; |
11892 | ushort s_addr; |
11893 | PortAddrunsigned short iop_base; |
11894 | ushort warn_code; |
11895 | |
11896 | iop_base = asc_dvc->iop_base; |
11897 | warn_code = 0; |
11898 | AscMemWordSetLram(iop_base, ASC_QADR_BEG(0x4000), 0, |
11899 | (ushort) (((int) (asc_dvc->max_total_qng + 2 + 1) * 64) >> 1) |
11900 | ); |
11901 | i = ASC_MIN_ACTIVE_QNO0x01; |
11902 | s_addr = ASC_QADR_BEG(0x4000) + ASC_QBLK_SIZE0x40; |
11903 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD0), |
11904 | (uchar) (i + 1)); |
11905 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD1), |
11906 | (uchar) (asc_dvc->max_total_qng)); |
11907 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO3), |
11908 | (uchar) i); |
11909 | i++; |
11910 | s_addr += ASC_QBLK_SIZE0x40; |
11911 | for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE0x40) { |
11912 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD0), |
11913 | (uchar) (i + 1)); |
11914 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD1), |
11915 | (uchar) (i - 1)); |
11916 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO3), |
11917 | (uchar) i); |
11918 | } |
11919 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD0), |
11920 | (uchar) ASC_QLINK_END0xFF); |
11921 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD1), |
11922 | (uchar) (asc_dvc->max_total_qng - 1)); |
11923 | AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO3), |
11924 | (uchar) asc_dvc->max_total_qng); |
11925 | i++; |
11926 | s_addr += ASC_QBLK_SIZE0x40; |
11927 | for (; i <= (uchar) (asc_dvc->max_total_qng + 3); |
11928 | i++, s_addr += ASC_QBLK_SIZE0x40) { |
11929 | AscWriteLramByte(iop_base, |
11930 | (ushort) (s_addr + (ushort) ASC_SCSIQ_B_FWD0), i); |
11931 | AscWriteLramByte(iop_base, |
11932 | (ushort) (s_addr + (ushort) ASC_SCSIQ_B_BWD1), i); |
11933 | AscWriteLramByte(iop_base, |
11934 | (ushort) (s_addr + (ushort) ASC_SCSIQ_B_QNO3), i); |
11935 | } |
11936 | return (warn_code); |
11937 | } |
11938 | |
11939 | STATICstatic ushort |
11940 | AscInitQLinkVar( |
11941 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
11942 | ) |
11943 | { |
11944 | PortAddrunsigned short iop_base; |
11945 | int i; |
11946 | ushort lram_addr; |
11947 | |
11948 | iop_base = asc_dvc->iop_base; |
11949 | AscPutRiscVarFreeQHead(iop_base, 1)AscWriteLramByte((iop_base), (ushort)0x0048, 1); |
11950 | AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng)AscWriteLramByte((iop_base), (ushort)0x0049, asc_dvc->max_total_qng ); |
11951 | AscPutVarFreeQHead(iop_base, 1)AscWriteLramWord((iop_base), (ushort)0x0058, 1); |
11952 | AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng)AscWriteLramWord((iop_base), (ushort)0x005A, asc_dvc->max_total_qng ); |
11953 | AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B(ushort)0x004F, |
11954 | (uchar) ((int) asc_dvc->max_total_qng + 1)); |
11955 | AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B(ushort)0x0050, |
11956 | (uchar) ((int) asc_dvc->max_total_qng + 2)); |
11957 | AscWriteLramByte(iop_base, (ushort) ASCV_TOTAL_READY_Q_B(ushort)0x0064, |
11958 | asc_dvc->max_total_qng); |
11959 | AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W(ushort)0x0030, 0); |
11960 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0); |
11961 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, 0); |
11962 | AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B(ushort)0x004B, 0); |
11963 | AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B(ushort)0x0068, 0); |
11964 | AscPutQDoneInProgress(iop_base, 0)AscWriteLramByte((iop_base), (ushort)0x004C, 0); |
11965 | lram_addr = ASC_QADR_BEG(0x4000); |
11966 | for (i = 0; i < 32; i++, lram_addr += 2) { |
11967 | AscWriteLramWord(iop_base, lram_addr, 0); |
11968 | } |
11969 | return (0); |
11970 | } |
11971 | |
11972 | STATICstatic int |
11973 | AscSetLibErrorCode( |
11974 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
11975 | ushort err_code |
11976 | ) |
11977 | { |
11978 | if (asc_dvc->err_code == 0) { |
11979 | asc_dvc->err_code = err_code; |
11980 | AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W(ushort)0x0030, |
11981 | err_code); |
11982 | } |
11983 | return (err_code); |
11984 | } |
11985 | |
11986 | |
11987 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
11988 | STATICstatic int |
11989 | _AscWaitQDone( |
11990 | PortAddrunsigned short iop_base, |
11991 | REGregister ASC_SCSI_Q * scsiq |
11992 | ) |
11993 | { |
11994 | ushort q_addr; |
11995 | uchar q_status; |
11996 | int count = 0; |
11997 | |
11998 | while (scsiq->q1.q_no == 0) ; |
11999 | q_addr = ASC_QNO_TO_QADDR(scsiq->q1.q_no)(((0x4000))+((int)(scsiq->q1.q_no) << 6)); |
12000 | do { |
12001 | q_status = AscReadLramByte(iop_base, q_addr + ASC_SCSIQ_B_STATUS2); |
12002 | DvcSleepMilliSecond(100L); |
12003 | if (count++ > 30) { |
12004 | return (0); |
12005 | } |
12006 | } while ((q_status & QS_READY0x01) != 0); |
12007 | return (1); |
12008 | } |
12009 | #endif /* version >= v1.3.89 */ |
12010 | |
12011 | STATICstatic uchar |
12012 | AscMsgOutSDTR( |
12013 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12014 | uchar sdtr_period, |
12015 | uchar sdtr_offset |
12016 | ) |
12017 | { |
12018 | EXT_MSG sdtr_buf; |
12019 | uchar sdtr_period_index; |
12020 | PortAddrunsigned short iop_base; |
12021 | |
12022 | iop_base = asc_dvc->iop_base; |
12023 | sdtr_buf.msg_type = MS_EXTEND0x01; |
12024 | sdtr_buf.msg_len = MS_SDTR_LEN0x03; |
12025 | sdtr_buf.msg_req = MS_SDTR_CODE0x01; |
12026 | sdtr_buf.xfer_periodu_ext_msg.sdtr.sdtr_xfer_period = sdtr_period; |
12027 | sdtr_offset &= ASC_SYN_MAX_OFFSET0x0F; |
12028 | sdtr_buf.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset = sdtr_offset; |
12029 | if ((sdtr_period_index = |
12030 | AscGetSynPeriodIndex(asc_dvc, sdtr_period)) <= |
12031 | asc_dvc->max_sdtr_index) { |
12032 | AscMemWordCopyToLram(iop_base, |
12033 | ASCV_MSGOUT_BEG0x0000, |
12034 | (ushort *) & sdtr_buf, |
12035 | (ushort) (sizeof (EXT_MSG) >> 1)); |
12036 | return ((sdtr_period_index << 4) | sdtr_offset); |
12037 | } else { |
12038 | |
12039 | sdtr_buf.req_ack_offsetu_ext_msg.sdtr.sdtr_req_ack_offset = 0; |
12040 | AscMemWordCopyToLram(iop_base, |
12041 | ASCV_MSGOUT_BEG0x0000, |
12042 | (ushort *) & sdtr_buf, |
12043 | (ushort) (sizeof (EXT_MSG) >> 1)); |
12044 | return (0); |
12045 | } |
12046 | } |
12047 | |
12048 | STATICstatic uchar |
12049 | AscCalSDTRData( |
12050 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12051 | uchar sdtr_period, |
12052 | uchar syn_offset |
12053 | ) |
12054 | { |
12055 | uchar byte; |
12056 | uchar sdtr_period_ix; |
12057 | |
12058 | sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period); |
12059 | if ( |
12060 | (sdtr_period_ix > asc_dvc->max_sdtr_index) |
12061 | ) { |
12062 | return (0xFF); |
12063 | } |
12064 | byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET0x0F); |
12065 | return (byte); |
12066 | } |
12067 | |
12068 | STATICstatic void |
12069 | AscSetChipSDTR( |
12070 | PortAddrunsigned short iop_base, |
12071 | uchar sdtr_data, |
12072 | uchar tid_no |
12073 | ) |
12074 | { |
12075 | AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); |
12076 | AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data)AscWriteLramByte((iop_base), (ushort)((ushort)(((0x0000 +8)+8 )+8)+(ushort)tid_no), (sdtr_data)) ;; |
12077 | return; |
12078 | } |
12079 | |
12080 | STATICstatic uchar |
12081 | AscGetSynPeriodIndex( |
12082 | ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12083 | rucharregister __u8 syn_time |
12084 | ) |
12085 | { |
12086 | rucharregister __u8 *period_table; |
12087 | int max_index; |
12088 | int min_index; |
12089 | int i; |
12090 | |
12091 | period_table = asc_dvc->sdtr_period_tbl; |
12092 | max_index = (int) asc_dvc->max_sdtr_index; |
12093 | min_index = (int)asc_dvc->host_init_sdtr_index ; |
12094 | if ((syn_time <= period_table[max_index])) { |
12095 | for (i = min_index; i < (max_index - 1); i++) { |
12096 | if (syn_time <= period_table[i]) { |
12097 | return ((uchar) i); |
12098 | } |
12099 | } |
12100 | return ((uchar) max_index); |
12101 | } else { |
12102 | return ((uchar) (max_index + 1)); |
12103 | } |
12104 | } |
12105 | |
12106 | STATICstatic uchar |
12107 | AscAllocFreeQueue( |
12108 | PortAddrunsigned short iop_base, |
12109 | uchar free_q_head |
12110 | ) |
12111 | { |
12112 | ushort q_addr; |
12113 | uchar next_qp; |
12114 | uchar q_status; |
12115 | |
12116 | q_addr = ASC_QNO_TO_QADDR(free_q_head)(((0x4000))+((int)(free_q_head) << 6)); |
12117 | q_status = (uchar) AscReadLramByte(iop_base, |
12118 | (ushort) (q_addr + ASC_SCSIQ_B_STATUS2)); |
12119 | next_qp = AscReadLramByte(iop_base, |
12120 | (ushort) (q_addr + ASC_SCSIQ_B_FWD0)); |
12121 | if (((q_status & QS_READY0x01) == 0) && (next_qp != ASC_QLINK_END0xFF)) { |
12122 | return (next_qp); |
12123 | } |
12124 | return (ASC_QLINK_END0xFF); |
12125 | } |
12126 | |
12127 | STATICstatic uchar |
12128 | AscAllocMultipleFreeQueue( |
12129 | PortAddrunsigned short iop_base, |
12130 | uchar free_q_head, |
12131 | uchar n_free_q |
12132 | ) |
12133 | { |
12134 | uchar i; |
12135 | |
12136 | for (i = 0; i < n_free_q; i++) { |
12137 | if ((free_q_head = AscAllocFreeQueue(iop_base, free_q_head)) |
12138 | == ASC_QLINK_END0xFF) { |
12139 | return (ASC_QLINK_END0xFF); |
12140 | } |
12141 | } |
12142 | return (free_q_head); |
12143 | } |
12144 | |
12145 | STATICstatic int |
12146 | AscRiscHaltedAbortSRB( |
12147 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12148 | ulong srb_ptr |
12149 | ) |
12150 | { |
12151 | PortAddrunsigned short iop_base; |
12152 | ushort q_addr; |
12153 | uchar q_no; |
12154 | ASC_QDONE_INFO scsiq_buf; |
12155 | ASC_QDONE_INFO *scsiq; |
12156 | ASC_ISR_CALLBACK asc_isr_callback; |
12157 | int last_int_level; |
12158 | |
12159 | iop_base = asc_dvc->iop_base; |
12160 | asc_isr_callback = (ASC_ISR_CALLBACK) asc_dvc->isr_callback; |
12161 | last_int_level = DvcEnterCritical(); |
12162 | scsiq = (ASC_QDONE_INFO *) & scsiq_buf; |
12163 | for (q_no = ASC_MIN_ACTIVE_QNO0x01; q_no <= asc_dvc->max_total_qng; |
12164 | q_no++) { |
12165 | q_addr = ASC_QNO_TO_QADDR(q_no)(((0x4000))+((int)(q_no) << 6)); |
12166 | scsiq->d2.srb_ptr = AscReadLramDWord(iop_base, |
12167 | (ushort) (q_addr + (ushort) ASC_SCSIQ_D_SRBPTR22)); |
12168 | if (scsiq->d2.srb_ptr == srb_ptr) { |
12169 | _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, asc_dvc->max_dma_count); |
12170 | if (((scsiq->q_status & QS_READY0x01) != 0) |
12171 | && ((scsiq->q_status & QS_ABORTED0x40) == 0) |
12172 | && ((scsiq->cntl & QCSG_SG_XFER_LIST0x02) == 0)) { |
12173 | scsiq->q_status |= QS_ABORTED0x40; |
12174 | scsiq->d3.done_stat = QD_ABORTED_BY_HOST0x02; |
12175 | AscWriteLramDWord(iop_base, |
12176 | (ushort) (q_addr + (ushort) ASC_SCSIQ_D_SRBPTR22), |
12177 | 0L); |
12178 | AscWriteLramByte(iop_base, |
12179 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
12180 | scsiq->q_status); |
12181 | (*asc_isr_callback) (asc_dvc, scsiq); |
12182 | return (1); |
12183 | } |
12184 | } |
12185 | } |
12186 | DvcLeaveCritical(last_int_level); |
12187 | return (0); |
12188 | } |
12189 | |
12190 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
12191 | STATICstatic int |
12192 | AscRiscHaltedAbortTIX( |
12193 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12194 | uchar target_ix |
12195 | ) |
12196 | { |
12197 | PortAddrunsigned short iop_base; |
12198 | ushort q_addr; |
12199 | uchar q_no; |
12200 | ASC_QDONE_INFO scsiq_buf; |
12201 | ASC_QDONE_INFO *scsiq; |
12202 | ASC_ISR_CALLBACK asc_isr_callback; |
12203 | int last_int_level; |
12204 | |
12205 | iop_base = asc_dvc->iop_base; |
12206 | asc_isr_callback = (ASC_ISR_CALLBACK) asc_dvc->isr_callback; |
12207 | last_int_level = DvcEnterCritical(); |
12208 | scsiq = (ASC_QDONE_INFO *) & scsiq_buf; |
12209 | for (q_no = ASC_MIN_ACTIVE_QNO0x01; q_no <= asc_dvc->max_total_qng; |
12210 | q_no++) { |
12211 | q_addr = ASC_QNO_TO_QADDR(q_no)(((0x4000))+((int)(q_no) << 6)); |
12212 | _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, asc_dvc->max_dma_count); |
12213 | if (((scsiq->q_status & QS_READY0x01) != 0) && |
12214 | ((scsiq->q_status & QS_ABORTED0x40) == 0) && |
12215 | ((scsiq->cntl & QCSG_SG_XFER_LIST0x02) == 0)) { |
12216 | if (scsiq->d2.target_ix == target_ix) { |
12217 | scsiq->q_status |= QS_ABORTED0x40; |
12218 | scsiq->d3.done_stat = QD_ABORTED_BY_HOST0x02; |
12219 | AscWriteLramDWord(iop_base, |
12220 | (ushort) (q_addr + (ushort) ASC_SCSIQ_D_SRBPTR22), |
12221 | 0L); |
12222 | AscWriteLramByte(iop_base, |
12223 | (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS2), |
12224 | scsiq->q_status); |
12225 | (*asc_isr_callback) (asc_dvc, scsiq); |
12226 | } |
12227 | } |
12228 | } |
12229 | DvcLeaveCritical(last_int_level); |
12230 | return (1); |
12231 | } |
12232 | #endif /* version >= v1.3.89 */ |
12233 | |
12234 | STATICstatic int |
12235 | AscHostReqRiscHalt( |
12236 | PortAddrunsigned short iop_base |
12237 | ) |
12238 | { |
12239 | int count = 0; |
12240 | int sta = 0; |
12241 | uchar saved_stop_code; |
12242 | |
12243 | if (AscIsChipHalted(iop_base)) |
12244 | return (1); |
12245 | saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036); |
12246 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, |
12247 | ASC_STOP_HOST_REQ_RISC_HALT0x40 | ASC_STOP_REQ_RISC_STOP0x01 |
12248 | ); |
12249 | do { |
12250 | if (AscIsChipHalted(iop_base)) { |
12251 | sta = 1; |
12252 | break; |
12253 | } |
12254 | DvcSleepMilliSecond(100); |
12255 | } while (count++ < 20); |
12256 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, saved_stop_code); |
12257 | return (sta); |
12258 | } |
12259 | |
12260 | STATICstatic int |
12261 | AscStopQueueExe( |
12262 | PortAddrunsigned short iop_base |
12263 | ) |
12264 | { |
12265 | int count = 0; |
12266 | |
12267 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036) == 0) { |
12268 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, |
12269 | ASC_STOP_REQ_RISC_STOP0x01); |
12270 | do { |
12271 | if ( |
12272 | AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036) & |
12273 | ASC_STOP_ACK_RISC_STOP0x03) { |
12274 | return (1); |
12275 | } |
12276 | DvcSleepMilliSecond(100); |
12277 | } while (count++ < 20); |
12278 | } |
12279 | return (0); |
12280 | } |
12281 | |
12282 | STATICstatic int |
12283 | AscStartQueueExe( |
12284 | PortAddrunsigned short iop_base |
12285 | ) |
12286 | { |
12287 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036) != 0) { |
12288 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, 0); |
12289 | } |
12290 | return (1); |
12291 | } |
12292 | |
12293 | STATICstatic int |
12294 | AscCleanUpBusyQueue( |
12295 | PortAddrunsigned short iop_base |
12296 | ) |
12297 | { |
12298 | int count; |
12299 | uchar stop_code; |
12300 | |
12301 | count = 0; |
12302 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036) != 0) { |
12303 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, |
12304 | ASC_STOP_CLEAN_UP_BUSY_Q0x10); |
12305 | do { |
12306 | stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036); |
12307 | if ((stop_code & ASC_STOP_CLEAN_UP_BUSY_Q0x10) == 0) |
12308 | break; |
12309 | DvcSleepMilliSecond(100); |
12310 | } while (count++ < 20); |
12311 | } |
12312 | return (1); |
12313 | } |
12314 | |
12315 | #if LINUX_VERSION_CODE131108 >= ASC_LINUX_VERSION(1,3,89)(((1) * 65536) + ((3) * 256) + (89)) |
12316 | STATICstatic int |
12317 | AscCleanUpDiscQueue( |
12318 | PortAddrunsigned short iop_base |
12319 | ) |
12320 | { |
12321 | int count; |
12322 | uchar stop_code; |
12323 | |
12324 | count = 0; |
12325 | if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036) != 0) { |
12326 | AscWriteLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036, |
12327 | ASC_STOP_CLEAN_UP_DISC_Q0x20); |
12328 | do { |
12329 | stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B(ushort)0x0036); |
12330 | if ((stop_code & ASC_STOP_CLEAN_UP_DISC_Q0x20) == 0) |
12331 | break; |
12332 | DvcSleepMilliSecond(100); |
12333 | } while (count++ < 20); |
12334 | } |
12335 | return (1); |
12336 | } |
12337 | #endif /* version >= v1.3.89 */ |
12338 | |
12339 | STATICstatic int |
12340 | AscWaitTixISRDone( |
12341 | ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12342 | uchar target_ix |
12343 | ) |
12344 | { |
12345 | uchar cur_req; |
12346 | uchar tid_no; |
12347 | int i = 0; |
12348 | |
12349 | tid_no = ASC_TIX_TO_TID(target_ix)((target_ix) & 7); |
12350 | while (i++ < 10) { |
12351 | if ((cur_req = asc_dvc->cur_dvc_qng[tid_no]) == 0) { |
12352 | break; |
12353 | } |
12354 | DvcSleepMilliSecond(1000L); |
12355 | if (asc_dvc->cur_dvc_qng[tid_no] == cur_req) { |
12356 | break; |
12357 | } |
12358 | } |
12359 | return (1); |
12360 | } |
12361 | |
12362 | STATICstatic int |
12363 | AscWaitISRDone( |
12364 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc |
12365 | ) |
12366 | { |
12367 | int tid; |
12368 | |
12369 | for (tid = 0; tid <= ASC_MAX_TID7; tid++) { |
12370 | AscWaitTixISRDone(asc_dvc, ASC_TID_TO_TIX(tid)((tid) & 7)); |
12371 | } |
12372 | return (1); |
12373 | } |
12374 | |
12375 | STATICstatic ulong |
12376 | AscGetOnePhyAddr( |
12377 | REGregister ASC_DVC_VAR asc_ptr_type * asc_dvc, |
12378 | uchar * buf_addr, |
12379 | ulong buf_size |
12380 | ) |
12381 | { |
12382 | ASC_MIN_SG_HEAD sg_head; |
12383 | |
12384 | sg_head.entry_cnt = ASC_MIN_SG_LIST2; |
12385 | if (DvcGetSGList(asc_dvc, (uchar *) buf_addr, |
12386 | buf_size, (ASC_SG_HEAD *) & sg_head) != buf_size) { |
12387 | return (0L); |
12388 | } |
12389 | if (sg_head.entry_cnt > 1) { |
12390 | return (0L); |
12391 | } |
12392 | return (sg_head.sg_list[0].addr); |
12393 | } |
12394 | |
12395 | STATICstatic void |
12396 | DvcDelayMicroSecond(ADV_DVC_VAR *asc_dvc, ushort micro_sec) |
12397 | { |
12398 | udelay(micro_sec)(__builtin_constant_p(micro_sec) ? __const_udelay((micro_sec) * 0x10c6ul) : __udelay(micro_sec)); |
12399 | } |
12400 | |
12401 | STATICstatic void |
12402 | DvcDelayNanoSecond(ASC_DVC_VAR asc_ptr_type * asc_dvc, ulong nano_sec) |
12403 | { |
12404 | udelay((nano_sec + 999)/1000)(__builtin_constant_p((nano_sec + 999)/1000) ? __const_udelay (((nano_sec + 999)/1000) * 0x10c6ul) : __udelay((nano_sec + 999 )/1000)); |
12405 | } |
12406 | |
12407 | ASC_INITFUNC(static ulong AscGetEisaProductID( unsigned short iop_base) |
12408 | STATIC ulongstatic ulong AscGetEisaProductID( unsigned short iop_base) |
12409 | AscGetEisaProductID(static ulong AscGetEisaProductID( unsigned short iop_base) |
12410 | PortAddr iop_basestatic ulong AscGetEisaProductID( unsigned short iop_base) |
12411 | )static ulong AscGetEisaProductID( unsigned short iop_base) |
12412 | )static ulong AscGetEisaProductID( unsigned short iop_base) |
12413 | { |
12414 | PortAddrunsigned short eisa_iop; |
12415 | ushort product_id_high, product_id_low; |
12416 | ulong product_id; |
12417 | |
12418 | eisa_iop = ASC_GET_EISA_SLOT(iop_base)(unsigned short)((iop_base) & 0xF000) | ASC_EISA_PID_IOP_MASK(0x0C80); |
12419 | product_id_low = inpw(eisa_iop)((__builtin_constant_p((eisa_iop)) && (eisa_iop) < 256) ? __inwc(eisa_iop) : __inw(eisa_iop)); |
12420 | product_id_high = inpw(eisa_iop + 2)((__builtin_constant_p((eisa_iop + 2)) && (eisa_iop + 2) < 256) ? __inwc(eisa_iop + 2) : __inw(eisa_iop + 2)); |
12421 | product_id = ((ulong) product_id_high << 16) | (ulong) product_id_low; |
12422 | return (product_id); |
12423 | } |
12424 | |
12425 | ASC_INITFUNC(static unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12426 | STATIC PortAddrstatic unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12427 | AscSearchIOPortAddrEISA(static unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12428 | PortAddr iop_basestatic unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12429 | )static unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12430 | )static unsigned short AscSearchIOPortAddrEISA( unsigned short iop_base) |
12431 | { |
12432 | ulong eisa_product_id; |
12433 | |
12434 | if (iop_base == 0) { |
12435 | iop_base = ASC_EISA_MIN_IOP_ADDR(0x0C30); |
12436 | } else { |
12437 | if (iop_base == ASC_EISA_MAX_IOP_ADDR(0xFC50)) |
12438 | return (0); |
12439 | if ((iop_base & 0x0050) == 0x0050) { |
12440 | iop_base += ASC_EISA_BIG_IOP_GAP(0x1C30 -0x0C50); |
12441 | } else { |
12442 | iop_base += ASC_EISA_SMALL_IOP_GAP(0x0020); |
12443 | } |
12444 | } |
12445 | while (iop_base <= ASC_EISA_MAX_IOP_ADDR(0xFC50)) { |
12446 | eisa_product_id = AscGetEisaProductID(iop_base); |
12447 | if ((eisa_product_id == ASC_EISA_ID_7400x01745004UL) || |
12448 | (eisa_product_id == ASC_EISA_ID_7500x01755004UL)) { |
12449 | if (AscFindSignature(iop_base)) { |
12450 | inpw(iop_base + 4)((__builtin_constant_p((iop_base + 4)) && (iop_base + 4) < 256) ? __inwc(iop_base + 4) : __inw(iop_base + 4)); |
12451 | return (iop_base); |
12452 | } |
12453 | } |
12454 | if (iop_base == ASC_EISA_MAX_IOP_ADDR(0xFC50)) |
12455 | return (0); |
12456 | if ((iop_base & 0x0050) == 0x0050) { |
12457 | iop_base += ASC_EISA_BIG_IOP_GAP(0x1C30 -0x0C50); |
12458 | } else { |
12459 | iop_base += ASC_EISA_SMALL_IOP_GAP(0x0020); |
12460 | } |
12461 | } |
12462 | return (0); |
12463 | } |
12464 | |
12465 | STATICstatic int |
12466 | AscStartChip( |
12467 | PortAddrunsigned short iop_base |
12468 | ) |
12469 | { |
12470 | AscSetChipControl(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc(((0)),(((iop_base)+(0x0F)))) : __outb(((0)),(((iop_base)+(0x0F))))); |
12471 | if ((AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_HALTED(unsigned short)0x0010) != 0) { |
12472 | return (0); |
12473 | } |
12474 | return (1); |
12475 | } |
12476 | |
12477 | STATICstatic int |
12478 | AscStopChip( |
12479 | PortAddrunsigned short iop_base |
12480 | ) |
12481 | { |
12482 | uchar cc_val; |
12483 | |
12484 | cc_val = AscGetChipControl(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x0F))) && ((iop_base)+(0x0F)) < 256) ? __inbc((iop_base)+(0x0F)) : __inb ((iop_base)+(0x0F))) & (~(CC_SINGLE_STEP(uchar)0x10 | CC_TEST(uchar)0x04 | CC_DIAG(uchar)0x01)); |
12485 | AscSetChipControl(iop_base, (uchar) (cc_val | CC_HALT))((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar) (cc_val | (uchar)0x20 ))),(((iop_base)+(0x0F)))) : __outb((((uchar) (cc_val | (uchar )0x20))),(((iop_base)+(0x0F))))); |
12486 | AscSetChipIH(iop_base, INS_HALT(ushort)0x6280); |
12487 | AscSetChipIH(iop_base, INS_RFLAG_WTM(ushort)0x7380); |
12488 | if ((AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_HALTED(unsigned short)0x0010) == 0) { |
12489 | return (0); |
12490 | } |
12491 | return (1); |
12492 | } |
12493 | |
12494 | STATICstatic int |
12495 | AscIsChipHalted( |
12496 | PortAddrunsigned short iop_base |
12497 | ) |
12498 | { |
12499 | if ((AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_HALTED(unsigned short)0x0010) != 0) { |
12500 | if ((AscGetChipControl(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x0F))) && ((iop_base)+(0x0F)) < 256) ? __inbc((iop_base)+(0x0F)) : __inb ((iop_base)+(0x0F))) & CC_HALT(uchar)0x20) != 0) { |
12501 | return (1); |
12502 | } |
12503 | } |
12504 | return (0); |
12505 | } |
12506 | |
12507 | STATICstatic void |
12508 | AscSetChipIH( |
12509 | PortAddrunsigned short iop_base, |
12510 | ushort ins_code |
12511 | ) |
12512 | { |
12513 | AscSetBank(iop_base, 1); |
12514 | AscWriteChipIH(iop_base, ins_code)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((ins_code)),(((iop_base)+(0x02 )))) : __outw(((ins_code)),(((iop_base)+(0x02))))); |
12515 | AscSetBank(iop_base, 0); |
12516 | return; |
12517 | } |
12518 | |
12519 | STATICstatic void |
12520 | AscAckInterrupt( |
12521 | PortAddrunsigned short iop_base |
12522 | ) |
12523 | { |
12524 | uchar host_flag; |
12525 | uchar risc_flag; |
12526 | ushort loop; |
12527 | |
12528 | loop = 0; |
12529 | do { |
12530 | risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B(ushort)0x006A); |
12531 | if (loop++ > 0x7FFF) { |
12532 | break; |
12533 | } |
12534 | } while ((risc_flag & ASC_RISC_FLAG_GEN_INT0x01) != 0); |
12535 | host_flag = AscReadLramByte(iop_base, ASCV_HOST_FLAG_B(ushort)0x005D) & (~ASC_HOST_FLAG_ACK_INT0x02); |
12536 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B(ushort)0x005D, |
12537 | (uchar) (host_flag | ASC_HOST_FLAG_ACK_INT0x02)); |
12538 | AscSetChipStatus(iop_base, CIW_INT_ACK)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x0100)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x0100)),(((iop_base )+(0x0E))))); |
12539 | loop = 0; |
12540 | while (AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_INT_PENDING(unsigned short)0x0001) { |
12541 | AscSetChipStatus(iop_base, CIW_INT_ACK)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x0100)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x0100)),(((iop_base )+(0x0E))))); |
12542 | if (loop++ > 3) { |
12543 | break; |
12544 | } |
12545 | } |
12546 | AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B(ushort)0x005D, host_flag); |
12547 | return; |
12548 | } |
12549 | |
12550 | STATICstatic void |
12551 | AscDisableInterrupt( |
12552 | PortAddrunsigned short iop_base |
12553 | ) |
12554 | { |
12555 | ushort cfg; |
12556 | |
12557 | cfg = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
12558 | AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON))((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg & (~0x0020))),(((iop_base )+(0x02)))) : __outw(((cfg & (~0x0020))),(((iop_base)+(0x02 ))))); |
12559 | return; |
12560 | } |
12561 | |
12562 | STATICstatic void |
12563 | AscEnableInterrupt( |
12564 | PortAddrunsigned short iop_base |
12565 | ) |
12566 | { |
12567 | ushort cfg; |
12568 | |
12569 | cfg = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
12570 | AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg | 0x0020)),(((iop_base)+ (0x02)))) : __outw(((cfg | 0x0020)),(((iop_base)+(0x02))))); |
12571 | return; |
12572 | } |
12573 | |
12574 | |
12575 | |
12576 | STATICstatic void |
12577 | AscSetBank( |
12578 | PortAddrunsigned short iop_base, |
12579 | uchar bank |
12580 | ) |
12581 | { |
12582 | uchar val; |
12583 | |
12584 | val = AscGetChipControl(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x0F))) && ((iop_base)+(0x0F)) < 256) ? __inbc((iop_base)+(0x0F)) : __inb ((iop_base)+(0x0F))) & |
12585 | (~(CC_SINGLE_STEP(uchar)0x10 | CC_TEST(uchar)0x04 | CC_DIAG(uchar)0x01 | CC_SCSI_RESET(uchar)0x40 | CC_CHIP_RESET(uchar)0x80)); |
12586 | if (bank == 1) { |
12587 | val |= CC_BANK_ONE(uchar)0x02; |
12588 | } else if (bank == 2) { |
12589 | val |= CC_DIAG(uchar)0x01 | CC_BANK_ONE(uchar)0x02; |
12590 | } else { |
12591 | val &= ~CC_BANK_ONE(uchar)0x02; |
12592 | } |
12593 | AscSetChipControl(iop_base, val)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc(((val)),(((iop_base)+(0x0F)))) : __outb(((val)),(((iop_base)+(0x0F))))); |
12594 | return; |
12595 | } |
12596 | |
12597 | STATICstatic int |
12598 | AscResetChipAndScsiBus( |
12599 | ASC_DVC_VAR *asc_dvc |
12600 | ) |
12601 | { |
12602 | PortAddrunsigned short iop_base; |
12603 | |
12604 | iop_base = asc_dvc->iop_base; |
12605 | while (AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_SCSI_RESET_ACTIVE(unsigned short)0x0008) ; |
12606 | AscStopChip(iop_base); |
12607 | AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x80 | (uchar)0x40 | ( uchar)0x20)),(((iop_base)+(0x0F)))) : __outb((((uchar)0x80 | ( uchar)0x40 | (uchar)0x20)),(((iop_base)+(0x0F))))); |
12608 | DvcDelayNanoSecond(asc_dvc, 60000); |
12609 | AscSetChipIH(iop_base, INS_RFLAG_WTM(ushort)0x7380); |
12610 | AscSetChipIH(iop_base, INS_HALT(ushort)0x6280); |
12611 | AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x80 | (uchar)0x20)), (((iop_base)+(0x0F)))) : __outb((((uchar)0x80 | (uchar)0x20)) ,(((iop_base)+(0x0F))))); |
12612 | AscSetChipControl(iop_base, CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x20)),(((iop_base)+( 0x0F)))) : __outb((((uchar)0x20)),(((iop_base)+(0x0F))))); |
12613 | DvcSleepMilliSecond(200); |
12614 | AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc((((unsigned short)0x1000)),((( iop_base)+(0x0E)))) : __outw((((unsigned short)0x1000)),(((iop_base )+(0x0E))))); |
12615 | AscSetChipStatus(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc(((0)),(((iop_base)+(0x0E)))) : __outw(((0)),(((iop_base)+(0x0E))))); |
12616 | return (AscIsChipHalted(iop_base)); |
12617 | } |
12618 | |
12619 | ASC_INITFUNC(static ulong AscGetMaxDmaCount( ushort bus_type) |
12620 | STATIC ulongstatic ulong AscGetMaxDmaCount( ushort bus_type) |
12621 | AscGetMaxDmaCount(static ulong AscGetMaxDmaCount( ushort bus_type) |
12622 | ushort bus_typestatic ulong AscGetMaxDmaCount( ushort bus_type) |
12623 | )static ulong AscGetMaxDmaCount( ushort bus_type) |
12624 | )static ulong AscGetMaxDmaCount( ushort bus_type) |
12625 | { |
12626 | if (bus_type & ASC_IS_ISA(0x0001)) |
12627 | return (ASC_MAX_ISA_DMA_COUNT(0x00FFFFFFL)); |
12628 | else if (bus_type & (ASC_IS_EISA(0x0002) | ASC_IS_VL(0x0040))) |
12629 | return (ASC_MAX_VL_DMA_COUNT(0x07FFFFFFL)); |
12630 | return (ASC_MAX_PCI_DMA_COUNT(0xFFFFFFFFL)); |
12631 | } |
12632 | |
12633 | ASC_INITFUNC(static ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12634 | STATIC ushortstatic ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12635 | AscGetIsaDmaChannel(static ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12636 | PortAddr iop_basestatic ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12637 | )static ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12638 | )static ushort AscGetIsaDmaChannel( unsigned short iop_base) |
12639 | { |
12640 | ushort channel; |
12641 | |
12642 | channel = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) & 0x0003; |
12643 | if (channel == 0x03) |
12644 | return (0); |
12645 | else if (channel == 0x00) |
12646 | return (7); |
12647 | return (channel + 4); |
12648 | } |
12649 | |
12650 | ASC_INITFUNC(static ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12651 | STATIC ushortstatic ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12652 | AscSetIsaDmaChannel(static ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12653 | PortAddr iop_base,static ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12654 | ushort dma_channelstatic ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12655 | )static ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12656 | )static ushort AscSetIsaDmaChannel( unsigned short iop_base, ushort dma_channel) |
12657 | { |
12658 | ushort cfg_lsw; |
12659 | uchar value; |
12660 | |
12661 | if ((dma_channel >= 5) && (dma_channel <= 7)) { |
12662 | if (dma_channel == 7) |
12663 | value = 0x00; |
12664 | else |
12665 | value = dma_channel - 4; |
12666 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))) & 0xFFFC; |
12667 | cfg_lsw |= value; |
12668 | AscSetChipCfgLsw(iop_base, cfg_lsw)((__builtin_constant_p((((iop_base)+(0x02)))) && (((iop_base )+(0x02))) < 256) ? __outwc(((cfg_lsw)),(((iop_base)+(0x02 )))) : __outw(((cfg_lsw)),(((iop_base)+(0x02))))); |
12669 | return (AscGetIsaDmaChannel(iop_base)); |
12670 | } |
12671 | return (0); |
12672 | } |
12673 | |
12674 | ASC_INITFUNC(static uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12675 | STATIC ucharstatic uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12676 | AscSetIsaDmaSpeed(static uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12677 | PortAddr iop_base,static uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12678 | uchar speed_valuestatic uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12679 | )static uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12680 | )static uchar AscSetIsaDmaSpeed( unsigned short iop_base, uchar speed_value) |
12681 | { |
12682 | speed_value &= 0x07; |
12683 | AscSetBank(iop_base, 1); |
12684 | AscWriteChipDmaSpeed(iop_base, speed_value)((__builtin_constant_p((((iop_base)+(0x07)))) && (((iop_base )+(0x07))) < 256) ? __outbc(((speed_value)),(((iop_base)+( 0x07)))) : __outb(((speed_value)),(((iop_base)+(0x07))))); |
12685 | AscSetBank(iop_base, 0); |
12686 | return (AscGetIsaDmaSpeed(iop_base)); |
12687 | } |
12688 | |
12689 | ASC_INITFUNC(static uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12690 | STATIC ucharstatic uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12691 | AscGetIsaDmaSpeed(static uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12692 | PortAddr iop_basestatic uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12693 | )static uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12694 | )static uchar AscGetIsaDmaSpeed( unsigned short iop_base) |
12695 | { |
12696 | uchar speed_value; |
12697 | |
12698 | AscSetBank(iop_base, 1); |
12699 | speed_value = AscReadChipDmaSpeed(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x07))) && ((iop_base)+(0x07)) < 256) ? __inbc((iop_base)+(0x07)) : __inb ((iop_base)+(0x07))); |
12700 | speed_value &= 0x07; |
12701 | AscSetBank(iop_base, 0); |
12702 | return (speed_value); |
12703 | } |
12704 | |
12705 | ASC_INITFUNC(static ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12706 | STATIC ushortstatic ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12707 | AscReadPCIConfigWord(static ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12708 | ASC_DVC_VAR asc_ptr_type *asc_dvc,static ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12709 | ushort pci_config_offset)static ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12710 | )static ushort AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) |
12711 | { |
12712 | uchar lsb, msb; |
12713 | |
12714 | lsb = DvcReadPCIConfigByte(asc_dvc, pci_config_offset); |
12715 | msb = DvcReadPCIConfigByte(asc_dvc, pci_config_offset + 1); |
12716 | return ((ushort) ((msb << 8) | lsb)); |
12717 | } |
12718 | |
12719 | ASC_INITFUNC(static ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12720 | STATIC ushortstatic ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12721 | AscInitGetConfig(static ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12722 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12723 | )static ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12724 | )static ushort AscInitGetConfig( ASC_DVC_VAR * asc_dvc) |
12725 | { |
12726 | ushort warn_code; |
12727 | PortAddrunsigned short iop_base; |
12728 | ushort PCIDeviceID; |
12729 | ushort PCIVendorID; |
12730 | uchar PCIRevisionID; |
12731 | uchar prevCmdRegBits; |
12732 | |
12733 | warn_code = 0; |
12734 | iop_base = asc_dvc->iop_base; |
12735 | asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG0x0001; |
12736 | if (asc_dvc->err_code != 0) { |
12737 | return (UW_ERR(uint)(0xFFFF)); |
12738 | } |
12739 | if (asc_dvc->bus_type == ASC_IS_PCI(0x0004)) { |
12740 | PCIVendorID = AscReadPCIConfigWord(asc_dvc, |
12741 | AscPCIConfigVendorIDRegister0x0000); |
12742 | |
12743 | PCIDeviceID = AscReadPCIConfigWord(asc_dvc, |
12744 | AscPCIConfigDeviceIDRegister0x0002); |
12745 | |
12746 | PCIRevisionID = DvcReadPCIConfigByte(asc_dvc, |
12747 | AscPCIConfigRevisionIDRegister0x0008); |
12748 | |
12749 | if (PCIVendorID != ASC_PCI_VENDORID0x10CD) { |
12750 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
12751 | } |
12752 | prevCmdRegBits = DvcReadPCIConfigByte(asc_dvc, |
12753 | AscPCIConfigCommandRegister0x0004); |
12754 | |
12755 | if ((prevCmdRegBits & AscPCICmdRegBits_IOMemBusMaster0x0007) != |
12756 | AscPCICmdRegBits_IOMemBusMaster0x0007) { |
12757 | DvcWritePCIConfigByte(asc_dvc, |
12758 | AscPCIConfigCommandRegister0x0004, |
12759 | (prevCmdRegBits | |
12760 | AscPCICmdRegBits_IOMemBusMaster0x0007)); |
12761 | |
12762 | if ((DvcReadPCIConfigByte(asc_dvc, |
12763 | AscPCIConfigCommandRegister0x0004) |
12764 | & AscPCICmdRegBits_IOMemBusMaster0x0007) |
12765 | != AscPCICmdRegBits_IOMemBusMaster0x0007) { |
12766 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
12767 | } |
12768 | } |
12769 | if ((PCIDeviceID == ASC_PCI_DEVICEID_1200A0x1100) || |
12770 | (PCIDeviceID == ASC_PCI_DEVICEID_1200B0x1200)) { |
12771 | DvcWritePCIConfigByte(asc_dvc, |
12772 | AscPCIConfigLatencyTimer0x000D, 0x00); |
12773 | if (DvcReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer0x000D) |
12774 | != 0x00) { |
12775 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
12776 | } |
12777 | } else if (PCIDeviceID == ASC_PCI_DEVICEID_ULTRA0x1300) { |
12778 | if (DvcReadPCIConfigByte(asc_dvc, |
12779 | AscPCIConfigLatencyTimer0x000D) < 0x20) { |
12780 | DvcWritePCIConfigByte(asc_dvc, |
12781 | AscPCIConfigLatencyTimer0x000D, 0x20); |
12782 | |
12783 | if (DvcReadPCIConfigByte(asc_dvc, |
12784 | AscPCIConfigLatencyTimer0x000D) < 0x20) { |
12785 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
12786 | } |
12787 | } |
12788 | } |
12789 | } |
12790 | |
12791 | if (AscFindSignature(iop_base)) { |
12792 | warn_code |= AscInitAscDvcVar(asc_dvc); |
12793 | warn_code |= AscInitFromEEP(asc_dvc); |
12794 | asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG0x0002; |
12795 | if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT30) { |
12796 | asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT30; |
12797 | } |
12798 | } else { |
12799 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE0x0200; |
12800 | } |
12801 | return(warn_code); |
12802 | } |
12803 | |
12804 | ASC_INITFUNC(static ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12805 | STATIC ushortstatic ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12806 | AscInitSetConfig(static ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12807 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12808 | )static ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12809 | )static ushort AscInitSetConfig( ASC_DVC_VAR * asc_dvc) |
12810 | { |
12811 | ushort warn_code = 0; |
12812 | |
12813 | asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG0x0004; |
12814 | if (asc_dvc->err_code != 0) |
12815 | return (UW_ERR(uint)(0xFFFF)); |
12816 | if (AscFindSignature(asc_dvc->iop_base)) { |
12817 | warn_code |= AscInitFromAscDvcVar(asc_dvc); |
12818 | asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG0x0008; |
12819 | } else { |
12820 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE0x0200; |
12821 | } |
12822 | return (warn_code); |
12823 | } |
12824 | |
12825 | ASC_INITFUNC(static ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12826 | STATIC ushortstatic ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12827 | AscInitFromAscDvcVar(static ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12828 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12829 | )static ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12830 | )static ushort AscInitFromAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12831 | { |
12832 | PortAddrunsigned short iop_base; |
12833 | ushort cfg_msw; |
12834 | ushort warn_code; |
12835 | ushort pci_device_id; |
12836 | |
12837 | iop_base = asc_dvc->iop_base; |
12838 | pci_device_id = asc_dvc->cfg->pci_device_id; |
12839 | warn_code = 0; |
12840 | cfg_msw = AscGetChipCfgMsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x04))) && ((iop_base)+(0x04)) < 256) ? __inwc((iop_base)+(0x04)) : __inw ((iop_base)+(0x04))); |
12841 | if ((cfg_msw & ASC_CFG_MSW_CLR_MASK0x3080) != 0) { |
12842 | cfg_msw &= (~(ASC_CFG_MSW_CLR_MASK0x3080)); |
12843 | warn_code |= ASC_WARN_CFG_MSW_RECOVER0x0040; |
12844 | AscSetChipCfgMsw(iop_base, cfg_msw)((__builtin_constant_p((((iop_base)+(0x04)))) && (((iop_base )+(0x04))) < 256) ? __outwc(((cfg_msw)),(((iop_base)+(0x04 )))) : __outw(((cfg_msw)),(((iop_base)+(0x04))))); |
12845 | } |
12846 | if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) != |
12847 | asc_dvc->cfg->cmd_qng_enabled) { |
12848 | asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled; |
12849 | warn_code |= ASC_WARN_CMD_QNG_CONFLICT0x0010; |
12850 | } |
12851 | if (AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_AUTO_CONFIG(unsigned short)0x4000) { |
12852 | warn_code |= ASC_WARN_AUTO_CONFIG0x0008; |
12853 | } |
12854 | if ((asc_dvc->bus_type & (ASC_IS_ISA(0x0001) | ASC_IS_VL(0x0040))) != 0) { |
12855 | if (AscSetChipIRQ(iop_base, asc_dvc->irq_no, asc_dvc->bus_type) |
12856 | != asc_dvc->irq_no) { |
12857 | asc_dvc->err_code |= ASC_IERR_SET_IRQ_NO0x0020; |
12858 | } |
12859 | } |
12860 | if (asc_dvc->bus_type & ASC_IS_PCI(0x0004)) { |
12861 | cfg_msw &= 0xFFC0; |
12862 | AscSetChipCfgMsw(iop_base, cfg_msw)((__builtin_constant_p((((iop_base)+(0x04)))) && (((iop_base )+(0x04))) < 256) ? __outwc(((cfg_msw)),(((iop_base)+(0x04 )))) : __outw(((cfg_msw)),(((iop_base)+(0x04))))); |
12863 | if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA(0x0104)) == ASC_IS_PCI_ULTRA(0x0104)) { |
12864 | } else { |
12865 | if ((pci_device_id == ASC_PCI_DEVICE_ID_REV_A0x1100) || |
12866 | (pci_device_id == ASC_PCI_DEVICE_ID_REV_B0x1200)) { |
12867 | asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB0x0001; |
12868 | asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN0x0002; |
12869 | } |
12870 | } |
12871 | } else if (asc_dvc->bus_type == ASC_IS_ISAPNP(0x0081)) { |
12872 | if (AscGetChipVersion(iop_base, asc_dvc->bus_type) |
12873 | == ASC_CHIP_VER_ASYN_BUG(0x21)) { |
12874 | asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN0x0002; |
12875 | } |
12876 | } |
12877 | if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) != |
12878 | asc_dvc->cfg->chip_scsi_id) { |
12879 | asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID0x0080; |
12880 | } |
12881 | if (asc_dvc->bus_type & ASC_IS_ISA(0x0001)) { |
12882 | AscSetIsaDmaChannel(iop_base, asc_dvc->cfg->isa_dma_channel); |
12883 | AscSetIsaDmaSpeed(iop_base, asc_dvc->cfg->isa_dma_speed); |
12884 | } |
12885 | return (warn_code); |
12886 | } |
12887 | |
12888 | ASC_INITFUNC(static ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12889 | STATIC ushortstatic ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12890 | AscInitAsc1000Driver(static ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12891 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12892 | )static ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12893 | )static ushort AscInitAsc1000Driver( ASC_DVC_VAR * asc_dvc) |
12894 | { |
12895 | ushort warn_code; |
12896 | PortAddrunsigned short iop_base; |
12897 | extern ushort _asc_mcode_size; |
12898 | extern ulong _asc_mcode_chksum; |
12899 | extern uchar _asc_mcode_buf[]; |
12900 | |
12901 | iop_base = asc_dvc->iop_base; |
12902 | warn_code = 0; |
12903 | if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI(ushort)0x0200) && |
12904 | !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE0x0100)) { |
12905 | AscResetChipAndScsiBus(asc_dvc); |
12906 | DvcSleepMilliSecond((ulong) ((ushort) asc_dvc->scsi_reset_wait * 1000)); |
12907 | } |
12908 | asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC0x0010; |
12909 | if (asc_dvc->err_code != 0) |
12910 | return (UW_ERR(uint)(0xFFFF)); |
12911 | if (!AscFindSignature(asc_dvc->iop_base)) { |
12912 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE0x0200; |
12913 | return (warn_code); |
12914 | } |
12915 | AscDisableInterrupt(iop_base); |
12916 | warn_code |= AscInitLram(asc_dvc); |
12917 | if (asc_dvc->err_code != 0) |
12918 | return (UW_ERR(uint)(0xFFFF)); |
12919 | if (AscLoadMicroCode(iop_base, 0, (ushort *) _asc_mcode_buf, |
12920 | _asc_mcode_size) != _asc_mcode_chksum) { |
12921 | asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM0x0002; |
12922 | return (warn_code); |
12923 | } |
12924 | warn_code |= AscInitMicroCodeVar(asc_dvc); |
12925 | asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC0x0020; |
12926 | AscEnableInterrupt(iop_base); |
12927 | return (warn_code); |
12928 | } |
12929 | |
12930 | ASC_INITFUNC(static ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12931 | STATIC ushortstatic ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12932 | AscInitAscDvcVar(static ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12933 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12934 | )static ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12935 | )static ushort AscInitAscDvcVar( ASC_DVC_VAR * asc_dvc) |
12936 | { |
12937 | int i; |
12938 | PortAddrunsigned short iop_base; |
12939 | ushort warn_code; |
12940 | uchar chip_version; |
12941 | |
12942 | iop_base = asc_dvc->iop_base; |
12943 | warn_code = 0; |
12944 | asc_dvc->err_code = 0; |
12945 | if ((asc_dvc->bus_type & |
12946 | (ASC_IS_ISA(0x0001) | ASC_IS_PCI(0x0004) | ASC_IS_EISA(0x0002) | ASC_IS_VL(0x0040))) == 0) { |
12947 | asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE0x0400; |
12948 | } |
12949 | AscSetChipControl(iop_base, CC_HALT)((__builtin_constant_p((((iop_base)+(0x0F)))) && (((iop_base )+(0x0F))) < 256) ? __outbc((((uchar)0x20)),(((iop_base)+( 0x0F)))) : __outb((((uchar)0x20)),(((iop_base)+(0x0F))))); |
12950 | AscSetChipStatus(iop_base, 0)((__builtin_constant_p((((iop_base)+(0x0E)))) && (((iop_base )+(0x0E))) < 256) ? __outwc(((0)),(((iop_base)+(0x0E)))) : __outw(((0)),(((iop_base)+(0x0E))))); |
12951 | asc_dvc->bug_fix_cntl = 0; |
12952 | asc_dvc->pci_fix_asyn_xfer = 0; |
12953 | asc_dvc->pci_fix_asyn_xfer_always = 0; |
12954 | asc_dvc->init_state = 0; |
12955 | asc_dvc->sdtr_done = 0; |
12956 | asc_dvc->cur_total_qng = 0; |
12957 | asc_dvc->is_in_int = 0; |
12958 | asc_dvc->in_critical_cnt = 0; |
12959 | asc_dvc->last_q_shortage = 0; |
12960 | asc_dvc->use_tagged_qng = 0; |
12961 | asc_dvc->no_scam = 0; |
12962 | asc_dvc->unit_not_ready = 0; |
12963 | asc_dvc->queue_full_or_busy = 0; |
12964 | asc_dvc->redo_scam = 0 ; |
12965 | asc_dvc->res2 = 0 ; |
12966 | asc_dvc->host_init_sdtr_index = 0 ; |
12967 | asc_dvc->res7 = 0 ; |
12968 | asc_dvc->res8 = 0 ; |
12969 | asc_dvc->cfg->can_tagged_qng = 0 ; |
12970 | asc_dvc->cfg->cmd_qng_enabled = 0; |
12971 | asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL0xFFFF; |
12972 | asc_dvc->init_sdtr = 0; |
12973 | asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG(0xF0); |
12974 | asc_dvc->scsi_reset_wait = 3; |
12975 | asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET0xFF; |
12976 | asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type); |
12977 | asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET0xFF; |
12978 | asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET0xFF; |
12979 | asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID7; |
12980 | asc_dvc->cfg->lib_serial_no = ASC_LIB_SERIAL_NUMBER113; |
12981 | asc_dvc->cfg->lib_version = (ASC_LIB_VERSION_MAJOR1 << 8) | |
12982 | ASC_LIB_VERSION_MINOR22; |
12983 | chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type); |
12984 | asc_dvc->cfg->chip_version = chip_version; |
12985 | asc_dvc->sdtr_period_tbl[0] = SYN_XFER_NS_025; |
12986 | asc_dvc->sdtr_period_tbl[1] = SYN_XFER_NS_130; |
12987 | asc_dvc->sdtr_period_tbl[2] = SYN_XFER_NS_235; |
12988 | asc_dvc->sdtr_period_tbl[3] = SYN_XFER_NS_340; |
12989 | asc_dvc->sdtr_period_tbl[4] = SYN_XFER_NS_450; |
12990 | asc_dvc->sdtr_period_tbl[5] = SYN_XFER_NS_560; |
12991 | asc_dvc->sdtr_period_tbl[6] = SYN_XFER_NS_670; |
12992 | asc_dvc->sdtr_period_tbl[7] = SYN_XFER_NS_785; |
12993 | asc_dvc->max_sdtr_index = 7; |
12994 | if ((asc_dvc->bus_type & ASC_IS_PCI(0x0004)) && |
12995 | (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150(0x08 | 0x02))) { |
12996 | asc_dvc->bus_type = ASC_IS_PCI_ULTRA(0x0104); |
12997 | asc_dvc->sdtr_period_tbl[0] = SYN_ULTRA_XFER_NS_012; |
12998 | asc_dvc->sdtr_period_tbl[1] = SYN_ULTRA_XFER_NS_119; |
12999 | asc_dvc->sdtr_period_tbl[2] = SYN_ULTRA_XFER_NS_225; |
13000 | asc_dvc->sdtr_period_tbl[3] = SYN_ULTRA_XFER_NS_332; |
13001 | asc_dvc->sdtr_period_tbl[4] = SYN_ULTRA_XFER_NS_438; |
13002 | asc_dvc->sdtr_period_tbl[5] = SYN_ULTRA_XFER_NS_544; |
13003 | asc_dvc->sdtr_period_tbl[6] = SYN_ULTRA_XFER_NS_650; |
13004 | asc_dvc->sdtr_period_tbl[7] = SYN_ULTRA_XFER_NS_757; |
13005 | asc_dvc->sdtr_period_tbl[8] = SYN_ULTRA_XFER_NS_863; |
13006 | asc_dvc->sdtr_period_tbl[9] = SYN_ULTRA_XFER_NS_969; |
13007 | asc_dvc->sdtr_period_tbl[10] = SYN_ULTRA_XFER_NS_1075; |
13008 | asc_dvc->sdtr_period_tbl[11] = SYN_ULTRA_XFER_NS_1182; |
13009 | asc_dvc->sdtr_period_tbl[12] = SYN_ULTRA_XFER_NS_1288; |
13010 | asc_dvc->sdtr_period_tbl[13] = SYN_ULTRA_XFER_NS_1394; |
13011 | asc_dvc->sdtr_period_tbl[14] = SYN_ULTRA_XFER_NS_14100; |
13012 | asc_dvc->sdtr_period_tbl[15] = SYN_ULTRA_XFER_NS_15107; |
13013 | asc_dvc->max_sdtr_index = 15; |
13014 | if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150(0x08 | 0x02)) |
13015 | { |
13016 | AscSetExtraControl(iop_base,((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((uchar)(0x40) | (uchar)(0x20 )))),(((iop_base)+(0x0D)))) : __outb(((((uchar)(0x40) | (uchar )(0x20)))),(((iop_base)+(0x0D))))) |
13017 | (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE))((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((uchar)(0x40) | (uchar)(0x20 )))),(((iop_base)+(0x0D)))) : __outb(((((uchar)(0x40) | (uchar )(0x20)))),(((iop_base)+(0x0D))))); |
13018 | } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050(0x08 | 0x03)) { |
13019 | AscSetExtraControl(iop_base,((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((uchar)(0x40) | (uchar)(0x10 )))),(((iop_base)+(0x0D)))) : __outb(((((uchar)(0x40) | (uchar )(0x10)))),(((iop_base)+(0x0D))))) |
13020 | (SEC_ACTIVE_NEGATE | SEC_ENABLE_FILTER))((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((uchar)(0x40) | (uchar)(0x10 )))),(((iop_base)+(0x0D)))) : __outb(((((uchar)(0x40) | (uchar )(0x10)))),(((iop_base)+(0x0D))))); |
13021 | } |
13022 | } |
13023 | if (asc_dvc->bus_type == ASC_IS_PCI(0x0004)) { |
13024 | AscSetExtraControl(iop_base, (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE))((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((uchar)(0x40) | (uchar)(0x20 )))),(((iop_base)+(0x0D)))) : __outb(((((uchar)(0x40) | (uchar )(0x20)))),(((iop_base)+(0x0D))))); |
13025 | } |
13026 | |
13027 | asc_dvc->cfg->isa_dma_speed = ASC_DEF_ISA_DMA_SPEED4; |
13028 | if (AscGetChipBusType(iop_base) == ASC_IS_ISAPNP(0x0081)) { |
13029 | AscSetChipIFC(iop_base, IFC_INIT_DEFAULT)((__builtin_constant_p((((iop_base)+(0x0D)))) && (((iop_base )+(0x0D))) < 256) ? __outbc(((((0x40) | (0x09)))),(((iop_base )+(0x0D)))) : __outb(((((0x40) | (0x09)))),(((iop_base)+(0x0D ))))); |
13030 | asc_dvc->bus_type = ASC_IS_ISAPNP(0x0081); |
13031 | } |
13032 | if ((asc_dvc->bus_type & ASC_IS_ISA(0x0001)) != 0) { |
13033 | asc_dvc->cfg->isa_dma_channel = (uchar) AscGetIsaDmaChannel(iop_base); |
13034 | } |
13035 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
13036 | asc_dvc->cur_dvc_qng[i] = 0; |
13037 | asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG4; |
13038 | asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *) 0L; |
13039 | asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *) 0L; |
13040 | asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG16; |
13041 | } |
13042 | return (warn_code); |
13043 | } |
13044 | |
13045 | ASC_INITFUNC(static ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13046 | STATIC ushortstatic ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13047 | AscInitFromEEP(static ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13048 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13049 | )static ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13050 | )static ushort AscInitFromEEP( ASC_DVC_VAR * asc_dvc) |
13051 | { |
13052 | ASCEEP_CONFIG eep_config_buf; |
13053 | ASCEEP_CONFIG *eep_config; |
13054 | PortAddrunsigned short iop_base; |
13055 | ushort chksum; |
13056 | ushort warn_code; |
13057 | ushort cfg_msw, cfg_lsw; |
13058 | int i; |
13059 | int write_eep = 0; |
13060 | |
13061 | iop_base = asc_dvc->iop_base; |
13062 | warn_code = 0; |
13063 | AscWriteLramWord(iop_base, ASCV_HALTCODE_W(ushort)0x0040, 0x00FE); |
13064 | AscStopQueueExe(iop_base); |
13065 | if ((AscStopChip(iop_base) == FALSE0) || |
13066 | (AscGetChipScsiCtrl(iop_base) != 0)) { |
13067 | asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE0x0100; |
13068 | AscResetChipAndScsiBus(asc_dvc); |
13069 | DvcSleepMilliSecond((ulong) ((ushort) asc_dvc->scsi_reset_wait * 1000)); |
13070 | } |
13071 | if (AscIsChipHalted(iop_base) == FALSE0) { |
13072 | asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP0x0008; |
13073 | return (warn_code); |
13074 | } |
13075 | AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR)((__builtin_constant_p((((iop_base)+(0x0C)))) && (((iop_base )+(0x0C))) < 256) ? __outwc(((0x0080)),(((iop_base)+(0x0C) ))) : __outw(((0x0080)),(((iop_base)+(0x0C))))); |
13076 | if (AscGetPCAddr(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x0C))) && ((iop_base)+(0x0C)) < 256) ? __inwc((iop_base)+(0x0C)) : __inw ((iop_base)+(0x0C))) != ASC_MCODE_START_ADDR0x0080) { |
13077 | asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR0x0004; |
13078 | return (warn_code); |
13079 | } |
13080 | eep_config = (ASCEEP_CONFIG *) & eep_config_buf; |
13081 | cfg_msw = AscGetChipCfgMsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x04))) && ((iop_base)+(0x04)) < 256) ? __inwc((iop_base)+(0x04)) : __inw ((iop_base)+(0x04))); |
13082 | cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
13083 | if ((cfg_msw & ASC_CFG_MSW_CLR_MASK0x3080) != 0) { |
13084 | cfg_msw &= (~(ASC_CFG_MSW_CLR_MASK0x3080)); |
13085 | warn_code |= ASC_WARN_CFG_MSW_RECOVER0x0040; |
13086 | AscSetChipCfgMsw(iop_base, cfg_msw)((__builtin_constant_p((((iop_base)+(0x04)))) && (((iop_base )+(0x04))) < 256) ? __outwc(((cfg_msw)),(((iop_base)+(0x04 )))) : __outw(((cfg_msw)),(((iop_base)+(0x04))))); |
13087 | } |
13088 | chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type); |
13089 | if (chksum == 0) { |
13090 | chksum = 0xaa55; |
13091 | } |
13092 | if (AscGetChipStatus(iop_base)(unsigned short)((__builtin_constant_p(((iop_base)+(0x0E))) && ((iop_base)+(0x0E)) < 256) ? __inwc((iop_base)+(0x0E)) : __inw ((iop_base)+(0x0E))) & CSW_AUTO_CONFIG(unsigned short)0x4000) { |
13093 | warn_code |= ASC_WARN_AUTO_CONFIG0x0008; |
13094 | if (asc_dvc->cfg->chip_version == 3) { |
13095 | if (eep_config->cfg_lsw != cfg_lsw) { |
13096 | warn_code |= ASC_WARN_EEPROM_RECOVER0x0020; |
13097 | eep_config->cfg_lsw = AscGetChipCfgLsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x02))) && ((iop_base)+(0x02)) < 256) ? __inwc((iop_base)+(0x02)) : __inw ((iop_base)+(0x02))); |
13098 | } |
13099 | if (eep_config->cfg_msw != cfg_msw) { |
13100 | warn_code |= ASC_WARN_EEPROM_RECOVER0x0020; |
13101 | eep_config->cfg_msw = AscGetChipCfgMsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x04))) && ((iop_base)+(0x04)) < 256) ? __inwc((iop_base)+(0x04)) : __inw ((iop_base)+(0x04))); |
13102 | } |
13103 | } |
13104 | } |
13105 | eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK0x3080; |
13106 | eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON0x0020; |
13107 | if (chksum != eep_config->chksum) { |
13108 | if (AscGetChipVersion(iop_base, asc_dvc->bus_type) == |
13109 | ASC_CHIP_VER_PCI_ULTRA_3050(0x08 | 0x03) ) |
13110 | { |
13111 | eep_config->init_sdtr = 0xFF; |
13112 | eep_config->disc_enable = 0xFF; |
13113 | eep_config->start_motor = 0xFF; |
13114 | eep_config->use_cmd_qng = 0; |
13115 | eep_config->max_total_qng = 0xF0; |
13116 | eep_config->max_tag_qng = 0x20; |
13117 | eep_config->cntl = 0xBFFF; |
13118 | eep_config->chip_scsi_id = 7; |
13119 | eep_config->no_scam = 0; |
13120 | eep_config->adapter_info[0] = 0; |
13121 | eep_config->adapter_info[1] = 0; |
13122 | eep_config->adapter_info[2] = 0; |
13123 | eep_config->adapter_info[3] = 0; |
13124 | eep_config->adapter_info[4] = 0; |
13125 | /* Indicate EEPROM-less board. */ |
13126 | eep_config->adapter_info[5] = 0xBB; |
13127 | } else { |
13128 | write_eep = 1 ; |
13129 | warn_code |= ASC_WARN_EEPROM_CHKSUM0x0002 ; |
13130 | } |
13131 | } |
13132 | asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr ; |
13133 | asc_dvc->cfg->disc_enable = eep_config->disc_enable; |
13134 | asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng; |
13135 | asc_dvc->cfg->isa_dma_speed = eep_config->isa_dma_speed; |
13136 | asc_dvc->start_motor = eep_config->start_motor; |
13137 | asc_dvc->dvc_cntl = eep_config->cntl; |
13138 | asc_dvc->no_scam = eep_config->no_scam; |
13139 | asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0]; |
13140 | asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1]; |
13141 | asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2]; |
13142 | asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3]; |
13143 | asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4]; |
13144 | asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5]; |
13145 | if (!AscTestExternalLram(asc_dvc)) { |
13146 | if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA(0x0104)) == ASC_IS_PCI_ULTRA(0x0104))) { |
13147 | eep_config->max_total_qng = ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG16; |
13148 | eep_config->max_tag_qng = ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG8; |
13149 | } else { |
13150 | eep_config->cfg_msw |= 0x0800; |
13151 | cfg_msw |= 0x0800; |
13152 | AscSetChipCfgMsw(iop_base, cfg_msw)((__builtin_constant_p((((iop_base)+(0x04)))) && (((iop_base )+(0x04))) < 256) ? __outwc(((cfg_msw)),(((iop_base)+(0x04 )))) : __outw(((cfg_msw)),(((iop_base)+(0x04))))); |
13153 | eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG20; |
13154 | eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG16; |
13155 | } |
13156 | } else { |
13157 | } |
13158 | if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG((7)+((0x02)))) { |
13159 | eep_config->max_total_qng = ASC_MIN_TOTAL_QNG((7)+((0x02))); |
13160 | } |
13161 | if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG240) { |
13162 | eep_config->max_total_qng = ASC_MAX_TOTAL_QNG240; |
13163 | } |
13164 | if (eep_config->max_tag_qng > eep_config->max_total_qng) { |
13165 | eep_config->max_tag_qng = eep_config->max_total_qng; |
13166 | } |
13167 | if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC(0x04)) { |
13168 | eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC(0x04); |
13169 | } |
13170 | asc_dvc->max_total_qng = eep_config->max_total_qng; |
13171 | if ((eep_config->use_cmd_qng & eep_config->disc_enable) != |
13172 | eep_config->use_cmd_qng) { |
13173 | eep_config->disc_enable = eep_config->use_cmd_qng; |
13174 | warn_code |= ASC_WARN_CMD_QNG_CONFLICT0x0010; |
13175 | } |
13176 | if (asc_dvc->bus_type & (ASC_IS_ISA(0x0001) | ASC_IS_VL(0x0040) | ASC_IS_EISA(0x0002))) { |
13177 | asc_dvc->irq_no = AscGetChipIRQ(iop_base, asc_dvc->bus_type); |
13178 | } |
13179 | eep_config->chip_scsi_id &= ASC_MAX_TID7; |
13180 | asc_dvc->cfg->chip_scsi_id = eep_config->chip_scsi_id; |
13181 | if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA(0x0104)) == ASC_IS_PCI_ULTRA(0x0104)) && |
13182 | !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA(ushort)0x4000)) { |
13183 | asc_dvc->host_init_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX0x02; |
13184 | } |
13185 | |
13186 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
13187 | asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i]; |
13188 | asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng; |
13189 | asc_dvc->cfg->sdtr_period_offset[i] = |
13190 | (uchar) (ASC_DEF_SDTR_OFFSET0x0F | |
13191 | (asc_dvc->host_init_sdtr_index << 4)); |
13192 | } |
13193 | eep_config->cfg_msw = AscGetChipCfgMsw(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x04))) && ((iop_base)+(0x04)) < 256) ? __inwc((iop_base)+(0x04)) : __inw ((iop_base)+(0x04))); |
13194 | if (write_eep) { |
13195 | (void) AscSetEEPConfig(iop_base, eep_config, asc_dvc->bus_type); |
13196 | } |
13197 | return (warn_code); |
13198 | } |
13199 | |
13200 | ASC_INITFUNC(static ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13201 | STATIC ushortstatic ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13202 | AscInitMicroCodeVar(static ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13203 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13204 | )static ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13205 | )static ushort AscInitMicroCodeVar( ASC_DVC_VAR * asc_dvc) |
13206 | { |
13207 | int i; |
13208 | ushort warn_code; |
13209 | PortAddrunsigned short iop_base; |
13210 | ulong phy_addr; |
13211 | |
13212 | iop_base = asc_dvc->iop_base; |
13213 | warn_code = 0; |
13214 | for (i = 0; i <= ASC_MAX_TID7; i++) { |
13215 | AscPutMCodeInitSDTRAtID(iop_base, i,AscWriteLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8) +(ushort)i), asc_dvc->cfg->sdtr_period_offset[i]) ; |
13216 | asc_dvc->cfg->sdtr_period_offset[i]AscWriteLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8) +(ushort)i), asc_dvc->cfg->sdtr_period_offset[i]) ; |
13217 | )AscWriteLramByte((iop_base), (ushort)((ushort)((0x0000 +8)+8) +(ushort)i), asc_dvc->cfg->sdtr_period_offset[i]) ;; |
13218 | } |
13219 | AscInitQLinkVar(asc_dvc); |
13220 | AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B(ushort)0x0052, |
13221 | asc_dvc->cfg->disc_enable); |
13222 | AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B(ushort)0x0055, |
13223 | ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id)(uchar)(0x01 << (asc_dvc->cfg->chip_scsi_id))); |
13224 | if ((phy_addr = AscGetOnePhyAddr(asc_dvc, |
13225 | (uchar *) asc_dvc->cfg->overrun_buf, |
13226 | ASC_OVERRUN_BSIZE0x00000048UL)) == 0L) { |
13227 | asc_dvc->err_code |= ASC_IERR_GET_PHY_ADDR0x0100; |
13228 | } else { |
13229 | phy_addr = (phy_addr & 0xFFFFFFF8UL) + 8; |
13230 | AscWriteLramDWord(iop_base, ASCV_OVERRUN_PADDR_D(ushort)0x0038, phy_addr); |
13231 | AscWriteLramDWord(iop_base, ASCV_OVERRUN_BSIZE_D(ushort)0x003C, |
13232 | ASC_OVERRUN_BSIZE0x00000048UL - 8); |
13233 | } |
13234 | asc_dvc->cfg->mcode_date = AscReadLramWord(iop_base, |
13235 | (ushort) ASCV_MC_DATE_W(ushort)0x0044); |
13236 | asc_dvc->cfg->mcode_version = AscReadLramWord(iop_base, |
13237 | (ushort) ASCV_MC_VER_W(ushort)0x0046); |
13238 | AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR)((__builtin_constant_p((((iop_base)+(0x0C)))) && (((iop_base )+(0x0C))) < 256) ? __outwc(((0x0080)),(((iop_base)+(0x0C) ))) : __outw(((0x0080)),(((iop_base)+(0x0C))))); |
13239 | if (AscGetPCAddr(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x0C))) && ((iop_base)+(0x0C)) < 256) ? __inwc((iop_base)+(0x0C)) : __inw ((iop_base)+(0x0C))) != ASC_MCODE_START_ADDR0x0080) { |
13240 | asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR0x0004; |
13241 | return (warn_code); |
13242 | } |
13243 | if (AscStartChip(iop_base) != 1) { |
13244 | asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP0x0008; |
13245 | return (warn_code); |
13246 | } |
13247 | return (warn_code); |
13248 | } |
13249 | |
13250 | ASC_INITFUNC(static int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13251 | STATIC intstatic int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13252 | AscTestExternalLram(static int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13253 | ASC_DVC_VAR asc_ptr_type * asc_dvcstatic int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13254 | )static int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13255 | )static int AscTestExternalLram( ASC_DVC_VAR * asc_dvc) |
13256 | { |
13257 | PortAddrunsigned short iop_base; |
13258 | ushort q_addr; |
13259 | ushort saved_word; |
13260 | int sta; |
13261 | |
13262 | iop_base = asc_dvc->iop_base; |
13263 | sta = 0; |
13264 | q_addr = ASC_QNO_TO_QADDR(241)(((0x4000))+((int)(241) << 6)); |
13265 | saved_word = AscReadLramWord(iop_base, q_addr); |
13266 | AscSetChipLramAddr(iop_base, q_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((q_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((q_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13267 | AscSetChipLramData(iop_base, 0x55AA)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((0x55AA)),(((iop_base)+(0x08) ))) : __outw(((0x55AA)),(((iop_base)+(0x08))))); |
13268 | DvcSleepMilliSecond(10); |
13269 | AscSetChipLramAddr(iop_base, q_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((q_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((q_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13270 | if (AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))) == 0x55AA) { |
13271 | sta = 1; |
13272 | AscWriteLramWord(iop_base, q_addr, saved_word); |
13273 | } |
13274 | return (sta); |
13275 | } |
13276 | |
13277 | ASC_INITFUNC(static int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13278 | STATIC intstatic int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13279 | AscWriteEEPCmdReg(static int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13280 | PortAddr iop_base,static int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13281 | uchar cmd_regstatic int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13282 | )static int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13283 | )static int AscWriteEEPCmdReg( unsigned short iop_base, uchar cmd_reg ) |
13284 | { |
13285 | uchar read_back; |
13286 | int retry; |
13287 | |
13288 | retry = 0; |
13289 | while (TRUE1) { |
13290 | AscSetChipEEPCmd(iop_base, cmd_reg)((__builtin_constant_p((((iop_base)+(0x07)))) && (((iop_base )+(0x07))) < 256) ? __outbc(((cmd_reg)),(((iop_base)+(0x07 )))) : __outb(((cmd_reg)),(((iop_base)+(0x07))))); |
13291 | DvcSleepMilliSecond(1); |
13292 | read_back = AscGetChipEEPCmd(iop_base)(uchar)((__builtin_constant_p(((iop_base)+(0x07))) && ((iop_base)+(0x07)) < 256) ? __inbc((iop_base)+(0x07)) : __inb ((iop_base)+(0x07))); |
13293 | if (read_back == cmd_reg) { |
13294 | return (1); |
13295 | } |
13296 | if (retry++ > ASC_EEP_MAX_RETRY20) { |
13297 | return (0); |
13298 | } |
13299 | } |
13300 | } |
13301 | |
13302 | ASC_INITFUNC(static int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13303 | STATIC intstatic int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13304 | AscWriteEEPDataReg(static int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13305 | PortAddr iop_base,static int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13306 | ushort data_regstatic int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13307 | )static int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13308 | )static int AscWriteEEPDataReg( unsigned short iop_base, ushort data_reg) |
13309 | { |
13310 | ushort read_back; |
13311 | int retry; |
13312 | |
13313 | retry = 0; |
13314 | while (TRUE1) { |
13315 | AscSetChipEEPData(iop_base, data_reg)((__builtin_constant_p((((iop_base)+(0x06)))) && (((iop_base )+(0x06))) < 256) ? __outwc(((data_reg)),(((iop_base)+(0x06 )))) : __outw(((data_reg)),(((iop_base)+(0x06))))); |
13316 | DvcSleepMilliSecond(1); |
13317 | read_back = AscGetChipEEPData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x06))) && ((iop_base)+(0x06)) < 256) ? __inwc((iop_base)+(0x06)) : __inw ((iop_base)+(0x06))); |
13318 | if (read_back == data_reg) { |
13319 | return (1); |
13320 | } |
13321 | if (retry++ > ASC_EEP_MAX_RETRY20) { |
13322 | return (0); |
13323 | } |
13324 | } |
13325 | } |
13326 | |
13327 | ASC_INITFUNC(static void AscWaitEEPRead( void) |
13328 | STATIC voidstatic void AscWaitEEPRead( void) |
13329 | AscWaitEEPRead(static void AscWaitEEPRead( void) |
13330 | voidstatic void AscWaitEEPRead( void) |
13331 | )static void AscWaitEEPRead( void) |
13332 | )static void AscWaitEEPRead( void) |
13333 | { |
13334 | DvcSleepMilliSecond(1); |
13335 | return; |
13336 | } |
13337 | |
13338 | ASC_INITFUNC(static void AscWaitEEPWrite( void) |
13339 | STATIC voidstatic void AscWaitEEPWrite( void) |
13340 | AscWaitEEPWrite(static void AscWaitEEPWrite( void) |
13341 | voidstatic void AscWaitEEPWrite( void) |
13342 | )static void AscWaitEEPWrite( void) |
13343 | )static void AscWaitEEPWrite( void) |
13344 | { |
13345 | DvcSleepMilliSecond(20); |
13346 | return; |
13347 | } |
13348 | |
13349 | ASC_INITFUNC(static ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13350 | STATIC ushortstatic ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13351 | AscReadEEPWord(static ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13352 | PortAddr iop_base,static ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13353 | uchar addrstatic ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13354 | )static ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13355 | )static ushort AscReadEEPWord( unsigned short iop_base, uchar addr ) |
13356 | { |
13357 | ushort read_wval; |
13358 | uchar cmd_reg; |
13359 | |
13360 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE0x00); |
13361 | AscWaitEEPRead(); |
13362 | cmd_reg = addr | ASC_EEP_CMD_READ0x80; |
13363 | AscWriteEEPCmdReg(iop_base, cmd_reg); |
13364 | AscWaitEEPRead(); |
13365 | read_wval = AscGetChipEEPData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x06))) && ((iop_base)+(0x06)) < 256) ? __inwc((iop_base)+(0x06)) : __inw ((iop_base)+(0x06))); |
13366 | AscWaitEEPRead(); |
13367 | return (read_wval); |
13368 | } |
13369 | |
13370 | ASC_INITFUNC(static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13371 | STATIC ushortstatic ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13372 | AscWriteEEPWord(static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13373 | PortAddr iop_base,static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13374 | uchar addr,static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13375 | ushort word_valstatic ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13376 | )static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13377 | )static ushort AscWriteEEPWord( unsigned short iop_base, uchar addr, ushort word_val) |
13378 | { |
13379 | ushort read_wval; |
13380 | |
13381 | read_wval = AscReadEEPWord(iop_base, addr); |
13382 | if (read_wval != word_val) { |
13383 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE0x30); |
13384 | AscWaitEEPRead(); |
13385 | AscWriteEEPDataReg(iop_base, word_val); |
13386 | AscWaitEEPRead(); |
13387 | AscWriteEEPCmdReg(iop_base, |
13388 | (uchar) ((uchar) ASC_EEP_CMD_WRITE0x40 | addr)); |
13389 | AscWaitEEPWrite(); |
13390 | AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE0x00); |
13391 | AscWaitEEPRead(); |
13392 | return (AscReadEEPWord(iop_base, addr)); |
13393 | } |
13394 | return (read_wval); |
13395 | } |
13396 | |
13397 | ASC_INITFUNC(static ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13398 | STATIC ushortstatic ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13399 | AscGetEEPConfig(static ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13400 | PortAddr iop_base,static ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13401 | ASCEEP_CONFIG * cfg_buf, ushort bus_typestatic ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13402 | )static ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13403 | )static ushort AscGetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13404 | { |
13405 | ushort wval; |
13406 | ushort sum; |
13407 | ushort *wbuf; |
13408 | int cfg_beg; |
13409 | int cfg_end; |
13410 | int s_addr; |
13411 | int isa_pnp_wsize; |
13412 | |
13413 | wbuf = (ushort *) cfg_buf; |
13414 | sum = 0; |
13415 | isa_pnp_wsize = 0; |
13416 | for (s_addr = 0; s_addr < (2 + isa_pnp_wsize); s_addr++, wbuf++) { |
13417 | wval = AscReadEEPWord(iop_base, (uchar) s_addr); |
13418 | sum += wval; |
13419 | *wbuf = wval; |
13420 | } |
13421 | if (bus_type & ASC_IS_VL(0x0040)) { |
13422 | cfg_beg = ASC_EEP_DVC_CFG_BEG_VL2; |
13423 | cfg_end = ASC_EEP_MAX_DVC_ADDR_VL15; |
13424 | } else { |
13425 | cfg_beg = ASC_EEP_DVC_CFG_BEG32; |
13426 | cfg_end = ASC_EEP_MAX_DVC_ADDR45; |
13427 | } |
13428 | for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); |
13429 | s_addr++, wbuf++) { |
13430 | wval = AscReadEEPWord(iop_base, (uchar) s_addr); |
13431 | sum += wval; |
13432 | *wbuf = wval; |
13433 | } |
13434 | *wbuf = AscReadEEPWord(iop_base, (uchar) s_addr); |
13435 | return (sum); |
13436 | } |
13437 | |
13438 | ASC_INITFUNC(static int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13439 | STATIC intstatic int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13440 | AscSetEEPConfigOnce(static int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13441 | PortAddr iop_base,static int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13442 | ASCEEP_CONFIG * cfg_buf, ushort bus_typestatic int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13443 | )static int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13444 | )static int AscSetEEPConfigOnce( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13445 | { |
13446 | int n_error; |
13447 | ushort *wbuf; |
13448 | ushort sum; |
13449 | int s_addr; |
13450 | int cfg_beg; |
13451 | int cfg_end; |
13452 | |
13453 | wbuf = (ushort *) cfg_buf; |
13454 | n_error = 0; |
13455 | sum = 0; |
13456 | for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { |
13457 | sum += *wbuf; |
13458 | if (*wbuf != AscWriteEEPWord(iop_base, (uchar) s_addr, *wbuf)) { |
13459 | n_error++; |
13460 | } |
13461 | } |
13462 | if (bus_type & ASC_IS_VL(0x0040)) { |
13463 | cfg_beg = ASC_EEP_DVC_CFG_BEG_VL2; |
13464 | cfg_end = ASC_EEP_MAX_DVC_ADDR_VL15; |
13465 | } else { |
13466 | cfg_beg = ASC_EEP_DVC_CFG_BEG32; |
13467 | cfg_end = ASC_EEP_MAX_DVC_ADDR45; |
13468 | } |
13469 | for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); |
13470 | s_addr++, wbuf++) { |
13471 | sum += *wbuf; |
13472 | if (*wbuf != AscWriteEEPWord(iop_base, (uchar) s_addr, *wbuf)) { |
13473 | n_error++; |
13474 | } |
13475 | } |
13476 | *wbuf = sum; |
13477 | if (sum != AscWriteEEPWord(iop_base, (uchar) s_addr, sum)) { |
13478 | n_error++; |
13479 | } |
13480 | wbuf = (ushort *) cfg_buf; |
13481 | for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { |
13482 | if (*wbuf != AscReadEEPWord(iop_base, (uchar) s_addr)) { |
13483 | n_error++; |
13484 | } |
13485 | } |
13486 | for (s_addr = cfg_beg; s_addr <= cfg_end; |
13487 | s_addr++, wbuf++) { |
13488 | if (*wbuf != AscReadEEPWord(iop_base, (uchar) s_addr)) { |
13489 | n_error++; |
13490 | } |
13491 | } |
13492 | return (n_error); |
13493 | } |
13494 | |
13495 | ASC_INITFUNC(static int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13496 | STATIC intstatic int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13497 | AscSetEEPConfig(static int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13498 | PortAddr iop_base,static int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13499 | ASCEEP_CONFIG * cfg_buf, ushort bus_typestatic int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13500 | )static int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13501 | )static int AscSetEEPConfig( unsigned short iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type) |
13502 | { |
13503 | int retry; |
13504 | int n_error; |
13505 | |
13506 | retry = 0; |
13507 | while (TRUE1) { |
13508 | if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf, |
13509 | bus_type)) == 0) { |
13510 | break; |
13511 | } |
13512 | if (++retry > ASC_EEP_MAX_RETRY20) { |
13513 | break; |
13514 | } |
13515 | } |
13516 | return (n_error); |
13517 | } |
13518 | |
13519 | STATICstatic void |
13520 | AscAsyncFix( |
13521 | ASC_DVC_VAR asc_ptr_type *asc_dvc, |
13522 | uchar tid_no, |
13523 | ASC_SCSI_INQUIRY *inq) |
13524 | { |
13525 | uchar dvc_type; |
13526 | ASC_SCSI_BIT_ID_TYPEuchar tid_bits; |
13527 | |
13528 | dvc_type = inq->byte0.peri_dvc_type; |
13529 | tid_bits = ASC_TIX_TO_TARGET_ID(tid_no)(0x01 << ((tid_no) & 7)); |
13530 | |
13531 | if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN0x0002) { |
13532 | if (!(asc_dvc->init_sdtr & tid_bits)) { |
13533 | if ((dvc_type == SCSI_TYPE_CDROM0x05) && |
13534 | (AscCompareString((uchar *) inq->vendor_id, |
13535 | (uchar *) "HP ", 3) == 0)) { |
13536 | asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; |
13537 | } |
13538 | asc_dvc->pci_fix_asyn_xfer |= tid_bits; |
13539 | if ((dvc_type == SCSI_TYPE_PROC0x03) || |
13540 | (dvc_type == SCSI_TYPE_SCANNER0x06)) { |
13541 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; |
13542 | } |
13543 | if ((dvc_type == SCSI_TYPE_SASD0x01) && |
13544 | (AscCompareString((uchar *) inq->vendor_id, |
13545 | (uchar *) "TANDBERG", 8) == 0) && |
13546 | (AscCompareString((uchar *) inq->product_id, |
13547 | (uchar *) " TDC 36", 7) == 0)) { |
13548 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; |
13549 | } |
13550 | if ((dvc_type == SCSI_TYPE_SASD0x01) && |
13551 | (AscCompareString((uchar *) inq->vendor_id, |
13552 | (uchar *) "WANGTEK ", 8) == 0)) { |
13553 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; |
13554 | } |
13555 | |
13556 | if ((dvc_type == SCSI_TYPE_CDROM0x05) && |
13557 | (AscCompareString((uchar *) inq->vendor_id, |
13558 | (uchar *) "NEC ", 8) == 0) && |
13559 | (AscCompareString((uchar *) inq->product_id, |
13560 | (uchar *) "CD-ROM DRIVE ", 16) == 0)) { |
13561 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; |
13562 | } |
13563 | |
13564 | if ((dvc_type == SCSI_TYPE_CDROM0x05) && |
13565 | (AscCompareString((uchar *) inq->vendor_id, |
13566 | (uchar *) "YAMAHA", 6) == 0) && |
13567 | (AscCompareString((uchar *) inq->product_id, |
13568 | (uchar *) "CDR400", 6) == 0)) { |
13569 | asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; |
13570 | } |
13571 | if (asc_dvc->pci_fix_asyn_xfer & tid_bits) { |
13572 | AscSetRunChipSynRegAtID(asc_dvc->iop_base, tid_no, |
13573 | ASYN_SDTR_DATA_FIX_PCI_REV_AB0x41); |
13574 | } |
13575 | } |
13576 | } |
13577 | return; |
13578 | } |
13579 | |
13580 | STATICstatic int |
13581 | AscTagQueuingSafe(ASC_SCSI_INQUIRY *inq) |
13582 | { |
13583 | if ((inq->add_len >= 32) && |
13584 | (AscCompareString((uchar *) inq->vendor_id, |
13585 | (uchar *) "QUANTUM XP34301", 15) == 0) && |
13586 | (AscCompareString((uchar *) inq->product_rev_level, |
13587 | (uchar *) "1071", 4) == 0)) |
13588 | { |
13589 | return 0; |
13590 | } |
13591 | return 1; |
13592 | } |
13593 | |
13594 | STATICstatic void |
13595 | AscInquiryHandling(ASC_DVC_VAR asc_ptr_type *asc_dvc, |
13596 | uchar tid_no, ASC_SCSI_INQUIRY *inq) |
13597 | { |
13598 | ASC_SCSI_BIT_ID_TYPEuchar tid_bit = ASC_TIX_TO_TARGET_ID(tid_no)(0x01 << ((tid_no) & 7)); |
13599 | ASC_SCSI_BIT_ID_TYPEuchar orig_init_sdtr, orig_use_tagged_qng; |
13600 | |
13601 | orig_init_sdtr = asc_dvc->init_sdtr; |
13602 | orig_use_tagged_qng = asc_dvc->use_tagged_qng; |
13603 | |
13604 | asc_dvc->init_sdtr &= ~tid_bit; |
13605 | asc_dvc->cfg->can_tagged_qng &= ~tid_bit; |
13606 | asc_dvc->use_tagged_qng &= ~tid_bit; |
13607 | |
13608 | if (inq->byte3.rsp_data_fmt >= 2 || inq->byte2.ansi_apr_ver >= 2) { |
13609 | if ((asc_dvc->cfg->sdtr_enable & tid_bit) && inq->byte7.Sync) { |
13610 | asc_dvc->init_sdtr |= tid_bit; |
13611 | } |
13612 | if ((asc_dvc->cfg->cmd_qng_enabled & tid_bit) && inq->byte7.CmdQue) { |
13613 | if (AscTagQueuingSafe(inq)) { |
13614 | asc_dvc->use_tagged_qng |= tid_bit; |
13615 | asc_dvc->cfg->can_tagged_qng |= tid_bit; |
13616 | } |
13617 | } |
13618 | } |
13619 | if (orig_use_tagged_qng != asc_dvc->use_tagged_qng) { |
13620 | AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B(ushort)0x0052, |
13621 | asc_dvc->cfg->disc_enable); |
13622 | AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B(ushort)0x004A, |
13623 | asc_dvc->use_tagged_qng); |
13624 | AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B(ushort)0x0053, |
13625 | asc_dvc->cfg->can_tagged_qng); |
13626 | |
13627 | asc_dvc->max_dvc_qng[tid_no] = |
13628 | asc_dvc->cfg->max_tag_qng[tid_no]; |
13629 | AscWriteLramByte(asc_dvc->iop_base, |
13630 | (ushort) (ASCV_MAX_DVC_QNG_BEG(ushort)0x0020 + tid_no), |
13631 | asc_dvc->max_dvc_qng[tid_no]); |
13632 | } |
13633 | if (orig_init_sdtr != asc_dvc->init_sdtr) { |
13634 | AscAsyncFix(asc_dvc, tid_no, inq); |
13635 | } |
13636 | return; |
13637 | } |
13638 | |
13639 | STATICstatic int |
13640 | AscCompareString( |
13641 | rucharregister __u8 * str1, |
13642 | rucharregister __u8 * str2, |
13643 | int len |
13644 | ) |
13645 | { |
13646 | int i; |
13647 | int diff; |
13648 | |
13649 | for (i = 0; i < len; i++) { |
13650 | diff = (int) (str1[i] - str2[i]); |
13651 | if (diff != 0) |
13652 | return (diff); |
13653 | } |
13654 | return (0); |
13655 | } |
13656 | |
13657 | STATICstatic uchar |
13658 | AscReadLramByte( |
13659 | PortAddrunsigned short iop_base, |
13660 | ushort addr |
13661 | ) |
13662 | { |
13663 | uchar byte_data; |
13664 | ushort word_data; |
13665 | |
13666 | if (isodd_word(addr)((((uint)addr) & (uint)0x0001) != 0)) { |
13667 | AscSetChipLramAddr(iop_base, addr - 1)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr - 1)),(((unsigned short)((iop_base)+(0x0A) )))) : __outw(((addr - 1)),(((unsigned short)((iop_base)+(0x0A )))))); |
13668 | word_data = AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
13669 | byte_data = (uchar) ((word_data >> 8) & 0xFF); |
13670 | } else { |
13671 | AscSetChipLramAddr(iop_base, addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr)),(((unsigned short)((iop_base)+(0x0A))))) : __outw(((addr)),(((unsigned short)((iop_base)+(0x0A)))))); |
13672 | word_data = AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
13673 | byte_data = (uchar) (word_data & 0xFF); |
13674 | } |
13675 | return (byte_data); |
13676 | } |
13677 | |
13678 | STATICstatic ushort |
13679 | AscReadLramWord( |
13680 | PortAddrunsigned short iop_base, |
13681 | ushort addr |
13682 | ) |
13683 | { |
13684 | ushort word_data; |
13685 | |
13686 | AscSetChipLramAddr(iop_base, addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr)),(((unsigned short)((iop_base)+(0x0A))))) : __outw(((addr)),(((unsigned short)((iop_base)+(0x0A)))))); |
13687 | word_data = AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
13688 | return (word_data); |
13689 | } |
13690 | |
13691 | STATICstatic ulong |
13692 | AscReadLramDWord( |
13693 | PortAddrunsigned short iop_base, |
13694 | ushort addr |
13695 | ) |
13696 | { |
13697 | ushort val_low, val_high; |
13698 | ulong dword_data; |
13699 | |
13700 | AscSetChipLramAddr(iop_base, addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr)),(((unsigned short)((iop_base)+(0x0A))))) : __outw(((addr)),(((unsigned short)((iop_base)+(0x0A)))))); |
13701 | val_low = AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
13702 | val_high = AscGetChipLramData(iop_base)(ushort)((__builtin_constant_p(((iop_base)+(0x08))) && ((iop_base)+(0x08)) < 256) ? __inwc((iop_base)+(0x08)) : __inw ((iop_base)+(0x08))); |
13703 | dword_data = ((ulong) val_high << 16) | (ulong) val_low; |
13704 | return (dword_data); |
13705 | } |
13706 | |
13707 | STATICstatic void |
13708 | AscWriteLramWord( |
13709 | PortAddrunsigned short iop_base, |
13710 | ushort addr, |
13711 | ushort word_val |
13712 | ) |
13713 | { |
13714 | AscSetChipLramAddr(iop_base, addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr)),(((unsigned short)((iop_base)+(0x0A))))) : __outw(((addr)),(((unsigned short)((iop_base)+(0x0A)))))); |
13715 | AscSetChipLramData(iop_base, word_val)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((word_val)),(((iop_base)+(0x08 )))) : __outw(((word_val)),(((iop_base)+(0x08))))); |
13716 | return; |
13717 | } |
13718 | |
13719 | STATICstatic void |
13720 | AscWriteLramDWord( |
13721 | PortAddrunsigned short iop_base, |
13722 | ushort addr, |
13723 | ulong dword_val |
13724 | ) |
13725 | { |
13726 | ushort word_val; |
13727 | |
13728 | AscSetChipLramAddr(iop_base, addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((addr)),(((unsigned short)((iop_base)+(0x0A))))) : __outw(((addr)),(((unsigned short)((iop_base)+(0x0A)))))); |
13729 | word_val = (ushort) dword_val; |
13730 | AscSetChipLramData(iop_base, word_val)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((word_val)),(((iop_base)+(0x08 )))) : __outw(((word_val)),(((iop_base)+(0x08))))); |
13731 | word_val = (ushort) (dword_val >> 16); |
13732 | AscSetChipLramData(iop_base, word_val)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((word_val)),(((iop_base)+(0x08 )))) : __outw(((word_val)),(((iop_base)+(0x08))))); |
13733 | return; |
13734 | } |
13735 | |
13736 | STATICstatic void |
13737 | AscWriteLramByte( |
13738 | PortAddrunsigned short iop_base, |
13739 | ushort addr, |
13740 | uchar byte_val |
13741 | ) |
13742 | { |
13743 | ushort word_data; |
13744 | |
13745 | if (isodd_word(addr)((((uint)addr) & (uint)0x0001) != 0)) { |
13746 | addr--; |
13747 | word_data = AscReadLramWord(iop_base, addr); |
13748 | word_data &= 0x00FF; |
13749 | word_data |= (((ushort) byte_val << 8) & 0xFF00); |
13750 | } else { |
13751 | word_data = AscReadLramWord(iop_base, addr); |
13752 | word_data &= 0xFF00; |
13753 | word_data |= ((ushort) byte_val & 0x00FF); |
13754 | } |
13755 | AscWriteLramWord(iop_base, addr, word_data); |
13756 | return; |
13757 | } |
13758 | |
13759 | STATICstatic void |
13760 | AscMemWordCopyToLram( |
13761 | PortAddrunsigned short iop_base, |
13762 | ushort s_addr, |
13763 | ushort * s_buffer, |
13764 | int words |
13765 | ) |
13766 | { |
13767 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13768 | DvcOutPortWords(iop_base + IOP_RAM_DATA(0x08), s_buffer, words); |
13769 | return; |
13770 | } |
13771 | |
13772 | STATICstatic void |
13773 | AscMemDWordCopyToLram( |
13774 | PortAddrunsigned short iop_base, |
13775 | ushort s_addr, |
13776 | ulong * s_buffer, |
13777 | int dwords |
13778 | ) |
13779 | { |
13780 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13781 | DvcOutPortDWords(iop_base + IOP_RAM_DATA(0x08), s_buffer, dwords); |
13782 | return; |
13783 | } |
13784 | |
13785 | STATICstatic void |
13786 | AscMemWordCopyFromLram( |
13787 | PortAddrunsigned short iop_base, |
13788 | ushort s_addr, |
13789 | ushort * d_buffer, |
13790 | int words |
13791 | ) |
13792 | { |
13793 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13794 | DvcInPortWords(iop_base + IOP_RAM_DATA(0x08), d_buffer, words); |
13795 | return; |
13796 | } |
13797 | |
13798 | STATICstatic ulong |
13799 | AscMemSumLramWord( |
13800 | PortAddrunsigned short iop_base, |
13801 | ushort s_addr, |
13802 | rintregister __s32 words |
13803 | ) |
13804 | { |
13805 | ulong sum; |
13806 | int i; |
13807 | |
13808 | sum = 0L; |
13809 | for (i = 0; i < words; i++, s_addr += 2) { |
13810 | sum += AscReadLramWord(iop_base, s_addr); |
13811 | } |
13812 | return (sum); |
13813 | } |
13814 | |
13815 | STATICstatic void |
13816 | AscMemWordSetLram( |
13817 | PortAddrunsigned short iop_base, |
13818 | ushort s_addr, |
13819 | ushort set_wval, |
13820 | rintregister __s32 words |
13821 | ) |
13822 | { |
13823 | rintregister __s32 i; |
13824 | |
13825 | AscSetChipLramAddr(iop_base, s_addr)((__builtin_constant_p((((unsigned short)((iop_base)+(0x0A))) )) && (((unsigned short)((iop_base)+(0x0A)))) < 256 ) ? __outwc(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) )) : __outw(((s_addr)),(((unsigned short)((iop_base)+(0x0A))) ))); |
13826 | for (i = 0; i < words; i++) { |
13827 | AscSetChipLramData(iop_base, set_wval)((__builtin_constant_p((((iop_base)+(0x08)))) && (((iop_base )+(0x08))) < 256) ? __outwc(((set_wval)),(((iop_base)+(0x08 )))) : __outw(((set_wval)),(((iop_base)+(0x08))))); |
13828 | } |
13829 | return; |
13830 | } |
13831 | |
13832 | |
13833 | /* |
13834 | * --- Adv Library Functions |
13835 | */ |
13836 | |
13837 | /* a_qswap.h */ |
13838 | STATICstatic unsigned char _adv_mcode_buf[] ASC_INITDATA = { |
13839 | 0x9C, 0xF0, 0x80, 0x01, 0x00, 0xF0, 0x44, 0x0A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13840 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13841 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x72, 0x01, 0xD6, 0x11, 0x00, 0x00, 0x70, 0x01, |
13842 | 0x30, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90, 0x10, 0x2D, 0x03, 0x00, 0x00, 0x00, 0x00, |
13843 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13844 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13845 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13846 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13847 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13848 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13849 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13850 | 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13851 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13852 | 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
13853 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13854 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13855 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13856 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13857 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x56, 0x34, 0x12, |
13858 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13859 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13860 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13861 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
13862 | 0x00, 0x00, 0x04, 0xF7, 0x70, 0x01, 0x0C, 0x1C, 0x06, 0xF7, 0x02, 0x00, 0x00, 0xF2, 0xD6, 0x0A, |
13863 | 0x04, 0xF7, 0x70, 0x01, 0x06, 0xF7, 0x02, 0x00, 0x3E, 0x57, 0x3C, 0x56, 0x0C, 0x1C, 0x00, 0xFC, |
13864 | 0xA6, 0x00, 0x01, 0x58, 0xAA, 0x13, 0x20, 0xF0, 0xA6, 0x03, 0x06, 0xEC, 0xB9, 0x00, 0x0E, 0x47, |
13865 | 0x03, 0xE6, 0x10, 0x00, 0xCE, 0x45, 0x02, 0x13, 0x3E, 0x57, 0x06, 0xEA, 0xB9, 0x00, 0x47, 0x4B, |
13866 | 0x03, 0xF6, 0xE0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x01, 0x48, 0x4E, 0x12, 0x03, 0xF6, 0xC0, 0x00, |
13867 | 0x00, 0xF2, 0x68, 0x0A, 0x41, 0x58, 0x03, 0xF6, 0xD0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x49, 0x44, |
13868 | 0x59, 0xF0, 0x0A, 0x02, 0x03, 0xF6, 0xE0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x44, 0x58, 0x00, 0xF2, |
13869 | 0xE2, 0x0D, 0x02, 0xCC, 0x4A, 0xE4, 0x01, 0x00, 0x55, 0xF0, 0x08, 0x03, 0x45, 0xF4, 0x02, 0x00, |
13870 | 0x83, 0x5A, 0x04, 0xCC, 0x01, 0x4A, 0x12, 0x12, 0x00, 0xF2, 0xE2, 0x0D, 0x00, 0xCD, 0x48, 0xE4, |
13871 | 0x01, 0x00, 0xE9, 0x13, 0x00, 0xF2, 0xC6, 0x0F, 0xFA, 0x10, 0x0E, 0x47, 0x03, 0xE6, 0x10, 0x00, |
13872 | 0xCE, 0x45, 0x02, 0x13, 0x3E, 0x57, 0xCE, 0x47, 0x97, 0x13, 0x04, 0xEC, 0xB4, 0x00, 0x00, 0xF2, |
13873 | 0xE2, 0x0D, 0x00, 0xCD, 0x48, 0xE4, 0x00, 0x00, 0x12, 0x12, 0x3E, 0x57, 0x06, 0xCC, 0x45, 0xF4, |
13874 | 0x02, 0x00, 0x83, 0x5A, 0x00, 0xCC, 0x00, 0xEA, 0xB4, 0x00, 0x92, 0x10, 0x00, 0xF0, 0x8C, 0x01, |
13875 | 0x43, 0xF0, 0x5C, 0x02, 0x44, 0xF0, 0x60, 0x02, 0x45, 0xF0, 0x64, 0x02, 0x46, 0xF0, 0x68, 0x02, |
13876 | 0x47, 0xF0, 0x6E, 0x02, 0x48, 0xF0, 0x9E, 0x02, 0xB9, 0x54, 0x62, 0x10, 0x00, 0x1C, 0x5A, 0x10, |
13877 | 0x02, 0x1C, 0x56, 0x10, 0x1E, 0x1C, 0x52, 0x10, 0x00, 0xF2, 0x1E, 0x11, 0x50, 0x10, 0x06, 0xFC, |
13878 | 0xA8, 0x00, 0x03, 0xF6, 0xBE, 0x00, 0x00, 0xF2, 0x4E, 0x0A, 0x8C, 0x10, 0x01, 0xF6, 0x01, 0x00, |
13879 | 0x01, 0xFA, 0xA8, 0x00, 0x00, 0xF2, 0x2C, 0x0B, 0x06, 0x10, 0xB9, 0x54, 0x01, 0xFA, 0xA8, 0x00, |
13880 | 0x03, 0xF6, 0xBE, 0x00, 0x00, 0xF2, 0x58, 0x0A, 0x01, 0xFC, 0xA8, 0x00, 0x20, 0x10, 0x58, 0x1C, |
13881 | 0x00, 0xF2, 0x1C, 0x0B, 0x5A, 0x1C, 0x01, 0xF6, 0x01, 0x00, 0x38, 0x54, 0x00, 0xFA, 0xA6, 0x00, |
13882 | 0x01, 0xFA, 0xA8, 0x00, 0x20, 0x1C, 0x00, 0xF0, 0x72, 0x01, 0x01, 0xF6, 0x01, 0x00, 0x38, 0x54, |
13883 | 0x00, 0xFA, 0xA6, 0x00, 0x01, 0xFA, 0xA8, 0x00, 0x20, 0x1C, 0x00, 0xF0, 0x80, 0x01, 0x03, 0xF6, |
13884 | 0xE0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x01, 0x48, 0x0A, 0x13, 0x00, 0xF2, 0x38, 0x10, 0x00, 0xF2, |
13885 | 0x54, 0x0F, 0x24, 0x10, 0x03, 0xF6, 0xC0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x02, 0xF6, 0xD0, 0x00, |
13886 | 0x02, 0x57, 0x03, 0x59, 0x01, 0xCC, 0x49, 0x44, 0x5B, 0xF0, 0x04, 0x03, 0x00, 0xF2, 0x9C, 0x0F, |
13887 | 0x00, 0xF0, 0x80, 0x01, 0x00, 0xF2, 0x14, 0x10, 0x0C, 0x1C, 0x02, 0x4B, 0xBF, 0x57, 0x9E, 0x43, |
13888 | 0x77, 0x57, 0x07, 0x4B, 0x20, 0xF0, 0xA6, 0x03, 0x40, 0x1C, 0x1E, 0xF0, 0x30, 0x03, 0x26, 0xF0, |
13889 | 0x2C, 0x03, 0xA0, 0xF0, 0x1A, 0x03, 0x11, 0xF0, 0xA6, 0x03, 0x12, 0x10, 0x9F, 0xF0, 0x3E, 0x03, |
13890 | 0x46, 0x1C, 0x82, 0xE7, 0x05, 0x00, 0x9E, 0xE7, 0x11, 0x00, 0x00, 0xF0, 0x06, 0x0A, 0x0C, 0x1C, |
13891 | 0x48, 0x1C, 0x46, 0x1C, 0x38, 0x54, 0x00, 0xEC, 0xBA, 0x00, 0x08, 0x44, 0x00, 0xEA, 0xBA, 0x00, |
13892 | 0x03, 0xF6, 0xC0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x08, 0x44, 0x00, 0x4C, 0x82, 0xE7, 0x02, 0x00, |
13893 | 0x00, 0xF2, 0x12, 0x11, 0x00, 0xF2, 0x12, 0x11, 0x85, 0xF0, 0x70, 0x03, 0x00, 0xF2, 0x60, 0x0B, |
13894 | 0x06, 0xF0, 0x80, 0x03, 0x09, 0xF0, 0x24, 0x09, 0x1E, 0xF0, 0xFC, 0x09, 0x00, 0xF0, 0x02, 0x0A, |
13895 | 0x00, 0xFC, 0xBE, 0x00, 0x98, 0x57, 0x55, 0xF0, 0xAC, 0x04, 0x01, 0xE6, 0x0C, 0x00, 0x00, 0xF2, |
13896 | 0x4E, 0x0D, 0x00, 0xF2, 0x12, 0x11, 0x00, 0xF2, 0xBC, 0x11, 0x00, 0xF2, 0xC8, 0x11, 0x01, 0xF0, |
13897 | 0x7C, 0x02, 0x00, 0xF0, 0x8A, 0x02, 0x46, 0x1C, 0x0C, 0x1C, 0x67, 0x1B, 0xBF, 0x57, 0x77, 0x57, |
13898 | 0x02, 0x4B, 0x48, 0x1C, 0x32, 0x1C, 0x00, 0xF2, 0x92, 0x0D, 0x30, 0x1C, 0x96, 0xF0, 0xBC, 0x03, |
13899 | 0xB1, 0xF0, 0xC0, 0x03, 0x1E, 0xF0, 0xFC, 0x09, 0x85, 0xF0, 0x02, 0x0A, 0x00, 0xFC, 0xBE, 0x00, |
13900 | 0x98, 0x57, 0x14, 0x12, 0x01, 0xE6, 0x0C, 0x00, 0x00, 0xF2, 0x4E, 0x0D, 0x00, 0xF2, 0x12, 0x11, |
13901 | 0x01, 0xF0, 0x7C, 0x02, 0x00, 0xF0, 0x8A, 0x02, 0x03, 0xF6, 0xE0, 0x00, 0x00, 0xF2, 0x68, 0x0A, |
13902 | 0x01, 0x48, 0x55, 0xF0, 0x98, 0x04, 0x03, 0x82, 0x03, 0xFC, 0xA0, 0x00, 0x9B, 0x57, 0x40, 0x12, |
13903 | 0x69, 0x18, 0x00, 0xF2, 0x12, 0x11, 0x85, 0xF0, 0x42, 0x04, 0x69, 0x08, 0x00, 0xF2, 0x12, 0x11, |
13904 | 0x85, 0xF0, 0x02, 0x0A, 0x68, 0x08, 0x4C, 0x44, 0x28, 0x12, 0x44, 0x48, 0x03, 0xF6, 0xE0, 0x00, |
13905 | 0x00, 0xF2, 0x68, 0x0A, 0x45, 0x58, 0x00, 0xF2, 0xF6, 0x0D, 0x00, 0xCC, 0x01, 0x48, 0x55, 0xF0, |
13906 | 0x98, 0x04, 0x4C, 0x44, 0xEF, 0x13, 0x00, 0xF2, 0xC6, 0x0F, 0x00, 0xF2, 0x14, 0x10, 0x08, 0x10, |
13907 | 0x68, 0x18, 0x45, 0x5A, 0x00, 0xF2, 0xF6, 0x0D, 0x04, 0x80, 0x18, 0xE4, 0x10, 0x00, 0x28, 0x12, |
13908 | 0x01, 0xE6, 0x06, 0x00, 0x04, 0x80, 0x18, 0xE4, 0x01, 0x00, 0x04, 0x12, 0x01, 0xE6, 0x0D, 0x00, |
13909 | 0x00, 0xF2, 0x4E, 0x0D, 0x00, 0xF2, 0x12, 0x11, 0x04, 0xE6, 0x02, 0x00, 0x9E, 0xE7, 0x15, 0x00, |
13910 | 0x01, 0xF0, 0x1C, 0x0A, 0x00, 0xF0, 0x02, 0x0A, 0x69, 0x08, 0x05, 0x80, 0x48, 0xE4, 0x00, 0x00, |
13911 | 0x0C, 0x12, 0x00, 0xE6, 0x11, 0x00, 0x00, 0xEA, 0xB8, 0x00, 0x00, 0xF2, 0xB6, 0x10, 0x82, 0xE7, |
13912 | 0x02, 0x00, 0x1C, 0x90, 0x40, 0x5C, 0x00, 0x16, 0x01, 0xE6, 0x06, 0x00, 0x00, 0xF2, 0x4E, 0x0D, |
13913 | 0x01, 0xF0, 0x80, 0x01, 0x1E, 0xF0, 0x80, 0x01, 0x00, 0xF0, 0xA0, 0x04, 0x42, 0x5B, 0x06, 0xF7, |
13914 | 0x03, 0x00, 0x46, 0x59, 0xBF, 0x57, 0x77, 0x57, 0x01, 0xE6, 0x80, 0x00, 0x07, 0x80, 0x31, 0x44, |
13915 | 0x04, 0x80, 0x18, 0xE4, 0x20, 0x00, 0x56, 0x13, 0x20, 0x80, 0x48, 0xE4, 0x03, 0x00, 0x4E, 0x12, |
13916 | 0x00, 0xFC, 0xA2, 0x00, 0x98, 0x57, 0x55, 0xF0, 0x1C, 0x05, 0x31, 0xE4, 0x40, 0x00, 0x00, 0xFC, |
13917 | 0xA0, 0x00, 0x98, 0x57, 0x36, 0x12, 0x4C, 0x1C, 0x00, 0xF2, 0x12, 0x11, 0x89, 0x48, 0x00, 0xF2, |
13918 | 0x12, 0x11, 0x86, 0xF0, 0x2E, 0x05, 0x82, 0xE7, 0x06, 0x00, 0x1B, 0x80, 0x48, 0xE4, 0x22, 0x00, |
13919 | 0x5B, 0xF0, 0x0C, 0x05, 0x48, 0xE4, 0x20, 0x00, 0x59, 0xF0, 0x10, 0x05, 0x00, 0xE6, 0x20, 0x00, |
13920 | 0x09, 0x48, 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0x2E, 0x05, 0x83, 0x80, 0x04, 0x10, 0x00, 0xF2, |
13921 | 0xA2, 0x0D, 0x00, 0xE6, 0x01, 0x00, 0x00, 0xEA, 0x26, 0x01, 0x01, 0xEA, 0x27, 0x01, 0x04, 0x80, |
13922 | 0x18, 0xE4, 0x10, 0x00, 0x36, 0x12, 0xB9, 0x54, 0x00, 0xF2, 0xF6, 0x0E, 0x01, 0xE6, 0x06, 0x00, |
13923 | 0x04, 0x80, 0x18, 0xE4, 0x01, 0x00, 0x04, 0x12, 0x01, 0xE6, 0x0D, 0x00, 0x00, 0xF2, 0x4E, 0x0D, |
13924 | 0x00, 0xF2, 0x12, 0x11, 0x00, 0xF2, 0xBC, 0x11, 0x00, 0xF2, 0xC8, 0x11, 0x04, 0xE6, 0x02, 0x00, |
13925 | 0x9E, 0xE7, 0x15, 0x00, 0x01, 0xF0, 0x1C, 0x0A, 0x00, 0xF0, 0x02, 0x0A, 0x00, 0xFC, 0x20, 0x01, |
13926 | 0x98, 0x57, 0x34, 0x12, 0x00, 0xFC, 0x24, 0x01, 0x98, 0x57, 0x2C, 0x13, 0xB9, 0x54, 0x00, 0xF2, |
13927 | 0xF6, 0x0E, 0x86, 0xF0, 0xA8, 0x05, 0x03, 0xF6, 0x01, 0x00, 0x00, 0xF2, 0x8C, 0x0E, 0x85, 0xF0, |
13928 | 0x9E, 0x05, 0x82, 0xE7, 0x03, 0x00, 0x00, 0xF2, 0x60, 0x0B, 0x82, 0xE7, 0x02, 0x00, 0x00, 0xFC, |
13929 | 0x24, 0x01, 0xB0, 0x57, 0x00, 0xFA, 0x24, 0x01, 0x00, 0xFC, 0x9E, 0x00, 0x98, 0x57, 0x5A, 0x12, |
13930 | 0x00, 0xFC, 0xB6, 0x00, 0x98, 0x57, 0x52, 0x13, 0x03, 0xE6, 0x0C, 0x00, 0x00, 0xFC, 0x9C, 0x00, |
13931 | 0x98, 0x57, 0x04, 0x13, 0x03, 0xE6, 0x19, 0x00, 0x05, 0xE6, 0x08, 0x00, 0x00, 0xF6, 0x00, 0x01, |
13932 | 0x00, 0x57, 0x00, 0x57, 0x03, 0x58, 0x00, 0xDC, 0x18, 0xF4, 0x00, 0x80, 0x04, 0x13, 0x05, 0xE6, |
13933 | 0x0F, 0x00, 0xB9, 0x54, 0x00, 0xF2, 0xF6, 0x0E, 0x86, 0xF0, 0x0A, 0x06, 0x00, 0xF2, 0xBA, 0x0E, |
13934 | 0x85, 0xF0, 0x00, 0x06, 0x82, 0xE7, 0x03, 0x00, 0x00, 0xF2, 0x60, 0x0B, 0x82, 0xE7, 0x02, 0x00, |
13935 | 0x00, 0xFC, 0xB6, 0x00, 0xB0, 0x57, 0x00, 0xFA, 0xB6, 0x00, 0x01, 0xF6, 0x01, 0x00, 0x00, 0xF2, |
13936 | 0xF6, 0x0E, 0x9C, 0x32, 0x4E, 0x1C, 0x32, 0x1C, 0x00, 0xF2, 0x92, 0x0D, 0x30, 0x1C, 0x82, 0xE7, |
13937 | 0x04, 0x00, 0xB1, 0xF0, 0x22, 0x06, 0x0A, 0xF0, 0x3E, 0x06, 0x05, 0xF0, 0xD6, 0x06, 0x06, 0xF0, |
13938 | 0xDC, 0x06, 0x09, 0xF0, 0x24, 0x09, 0x1E, 0xF0, 0xFC, 0x09, 0x00, 0xF0, 0x02, 0x0A, 0x04, 0x80, |
13939 | 0x18, 0xE4, 0x20, 0x00, 0x30, 0x12, 0x09, 0xE7, 0x03, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x21, 0x80, |
13940 | 0x18, 0xE4, 0xE0, 0x00, 0x09, 0x48, 0x00, 0xF2, 0x12, 0x11, 0x09, 0xE7, 0x00, 0x00, 0x00, 0xF2, |
13941 | 0x12, 0x11, 0x09, 0xE7, 0x00, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x99, 0xA4, 0x00, 0xF2, 0x12, 0x11, |
13942 | 0x09, 0xE7, 0x00, 0x00, 0x9A, 0x10, 0x04, 0x80, 0x18, 0xE4, 0x02, 0x00, 0x34, 0x12, 0x09, 0xE7, |
13943 | 0x1B, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x21, 0x80, 0x18, 0xE4, 0xE0, 0x00, 0x09, 0x48, 0x00, 0xF2, |
13944 | 0x12, 0x11, 0x09, 0xE7, 0x00, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x09, 0xE7, 0x00, 0x00, 0x00, 0xF2, |
13945 | 0x12, 0x11, 0x09, 0xE7, 0x01, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x09, 0xE7, 0x00, 0x00, 0x00, 0xF0, |
13946 | 0x0C, 0x09, 0xBB, 0x55, 0x9A, 0x81, 0x03, 0xF7, 0x20, 0x00, 0x09, 0x6F, 0x93, 0x45, 0x55, 0xF0, |
13947 | 0xE2, 0x06, 0xB1, 0xF0, 0xC2, 0x06, 0x0A, 0xF0, 0xBA, 0x06, 0x09, 0xF0, 0x24, 0x09, 0x1E, 0xF0, |
13948 | 0xFC, 0x09, 0x00, 0xF0, 0x02, 0x0A, 0x00, 0xF2, 0x60, 0x0B, 0x47, 0x10, 0x09, 0xE7, 0x08, 0x00, |
13949 | 0x41, 0x10, 0x05, 0x80, 0x48, 0xE4, 0x00, 0x00, 0x1E, 0x12, 0x00, 0xE6, 0x11, 0x00, 0x00, 0xEA, |
13950 | 0xB8, 0x00, 0x00, 0xF2, 0xB6, 0x10, 0x2C, 0x90, 0xAE, 0x90, 0x08, 0x50, 0x8A, 0x50, 0x38, 0x54, |
13951 | 0x1F, 0x40, 0x00, 0xF2, 0xB4, 0x0D, 0x08, 0x10, 0x08, 0x90, 0x8A, 0x90, 0x30, 0x50, 0xB2, 0x50, |
13952 | 0x9C, 0x32, 0x0C, 0x92, 0x8E, 0x92, 0x38, 0x54, 0x04, 0x80, 0x30, 0xE4, 0x08, 0x00, 0x04, 0x40, |
13953 | 0x0C, 0x1C, 0x00, 0xF6, 0x03, 0x00, 0xB1, 0xF0, 0x26, 0x07, 0x9E, 0xF0, 0x3A, 0x07, 0x01, 0x48, |
13954 | 0x55, 0xF0, 0xFC, 0x09, 0x0C, 0x1C, 0x10, 0x44, 0xED, 0x10, 0x0B, 0xF0, 0x5E, 0x07, 0x0C, 0xF0, |
13955 | 0x62, 0x07, 0x05, 0xF0, 0x52, 0x07, 0x06, 0xF0, 0x58, 0x07, 0x09, 0xF0, 0x24, 0x09, 0x00, 0xF0, |
13956 | 0x02, 0x0A, 0x00, 0xF2, 0x60, 0x0B, 0xCF, 0x10, 0x09, 0xE7, 0x08, 0x00, 0xC9, 0x10, 0x2E, 0x1C, |
13957 | 0x02, 0x10, 0x2C, 0x1C, 0xAA, 0xF0, 0x64, 0x07, 0xAC, 0xF0, 0x72, 0x07, 0x40, 0x10, 0x34, 0x1C, |
13958 | 0xF3, 0x10, 0xAD, 0xF0, 0x7C, 0x07, 0xC8, 0x10, 0x36, 0x1C, 0xE9, 0x10, 0x2B, 0xF0, 0x82, 0x08, |
13959 | 0x6B, 0x18, 0x18, 0xF4, 0x00, 0xFE, 0x20, 0x12, 0x01, 0x58, 0xD2, 0xF0, 0x82, 0x08, 0x76, 0x18, |
13960 | 0x18, 0xF4, 0x03, 0x00, 0xEC, 0x12, 0x00, 0xFC, 0x22, 0x01, 0x18, 0xF4, 0x01, 0x00, 0xE2, 0x12, |
13961 | 0x0B, 0xF0, 0x64, 0x07, 0x0C, 0xF0, 0x64, 0x07, 0x36, 0x1C, 0x34, 0x1C, 0xB7, 0x10, 0x38, 0x54, |
13962 | 0xB9, 0x54, 0x84, 0x80, 0x19, 0xE4, 0x20, 0x00, 0xB2, 0x13, 0x85, 0x80, 0x81, 0x48, 0x66, 0x12, |
13963 | 0x04, 0x80, 0x18, 0xE4, 0x08, 0x00, 0x58, 0x13, 0x1F, 0x80, 0x08, 0x44, 0xC8, 0x44, 0x9F, 0x12, |
13964 | 0x1F, 0x40, 0x34, 0x91, 0xB6, 0x91, 0x44, 0x55, 0xE5, 0x55, 0x02, 0xEC, 0xB8, 0x00, 0x02, 0x49, |
13965 | 0xBB, 0x55, 0x82, 0x81, 0xC0, 0x55, 0x48, 0xF4, 0x0F, 0x00, 0x5A, 0xF0, 0x1A, 0x08, 0x4A, 0xE4, |
13966 | 0x17, 0x00, 0xD5, 0xF0, 0xFA, 0x07, 0x02, 0xF6, 0x0F, 0x00, 0x02, 0xF4, 0x02, 0x00, 0x02, 0xEA, |
13967 | 0xB8, 0x00, 0x04, 0x91, 0x86, 0x91, 0x02, 0x4B, 0x2C, 0x90, 0x08, 0x50, 0x2E, 0x90, 0x0A, 0x50, |
13968 | 0x2C, 0x51, 0xAE, 0x51, 0x00, 0xF2, 0xB6, 0x10, 0x38, 0x54, 0x00, 0xF2, 0xB4, 0x0D, 0x56, 0x10, |
13969 | 0x34, 0x91, 0xB6, 0x91, 0x0C, 0x10, 0x04, 0x80, 0x18, 0xE4, 0x08, 0x00, 0x41, 0x12, 0x0C, 0x91, |
13970 | 0x8E, 0x91, 0x04, 0x80, 0x18, 0xE4, 0xF7, 0x00, 0x04, 0x40, 0x30, 0x90, 0xB2, 0x90, 0x36, 0x10, |
13971 | 0x02, 0x80, 0x48, 0xE4, 0x10, 0x00, 0x31, 0x12, 0x82, 0xE7, 0x10, 0x00, 0x84, 0x80, 0x19, 0xE4, |
13972 | 0x20, 0x00, 0x10, 0x13, 0x0C, 0x90, 0x8E, 0x90, 0x5D, 0xF0, 0x78, 0x07, 0x0C, 0x58, 0x8D, 0x58, |
13973 | 0x00, 0xF0, 0x64, 0x07, 0x38, 0x54, 0xB9, 0x54, 0x19, 0x80, 0xF1, 0x10, 0x3A, 0x55, 0x19, 0x81, |
13974 | 0xBB, 0x55, 0x10, 0x90, 0x92, 0x90, 0x10, 0x58, 0x91, 0x58, 0x14, 0x59, 0x95, 0x59, 0x00, 0xF0, |
13975 | 0x64, 0x07, 0x04, 0x80, 0x18, 0xE4, 0x20, 0x00, 0x06, 0x12, 0x6C, 0x19, 0x19, 0x41, 0x7C, 0x10, |
13976 | 0x6C, 0x19, 0x0C, 0x51, 0xED, 0x19, 0x8E, 0x51, 0x6B, 0x18, 0x18, 0xF4, 0x00, 0xFF, 0x02, 0x13, |
13977 | 0x6A, 0x10, 0x01, 0x58, 0xD2, 0xF0, 0xC0, 0x08, 0x76, 0x18, 0x18, 0xF4, 0x03, 0x00, 0x0A, 0x12, |
13978 | 0x00, 0xFC, 0x22, 0x01, 0x18, 0xF4, 0x01, 0x00, 0x06, 0x13, 0x9E, 0xE7, 0x16, 0x00, 0x4C, 0x10, |
13979 | 0xD1, 0xF0, 0xCA, 0x08, 0x9E, 0xE7, 0x17, 0x00, 0x42, 0x10, 0xD0, 0xF0, 0xD4, 0x08, 0x9E, 0xE7, |
13980 | 0x19, 0x00, 0x38, 0x10, 0xCF, 0xF0, 0xDE, 0x08, 0x9E, 0xE7, 0x20, 0x00, 0x2E, 0x10, 0xCE, 0xF0, |
13981 | 0xE8, 0x08, 0x9E, 0xE7, 0x21, 0x00, 0x24, 0x10, 0xCD, 0xF0, 0xF2, 0x08, 0x9E, 0xE7, 0x22, 0x00, |
13982 | 0x1A, 0x10, 0xCC, 0xF0, 0x04, 0x09, 0x84, 0x80, 0x19, 0xE4, 0x04, 0x00, 0x06, 0x12, 0x9E, 0xE7, |
13983 | 0x12, 0x00, 0x08, 0x10, 0xCB, 0xF0, 0x0C, 0x09, 0x9E, 0xE7, 0x24, 0x00, 0xB1, 0xF0, 0x0C, 0x09, |
13984 | 0x05, 0xF0, 0x1E, 0x09, 0x09, 0xF0, 0x24, 0x09, 0x1E, 0xF0, 0xFC, 0x09, 0xE4, 0x10, 0x00, 0xF2, |
13985 | 0x60, 0x0B, 0xE9, 0x10, 0x9C, 0x32, 0x82, 0xE7, 0x20, 0x00, 0x32, 0x1C, 0xE9, 0x09, 0x00, 0xF2, |
13986 | 0x12, 0x11, 0x85, 0xF0, 0x02, 0x0A, 0x69, 0x08, 0x01, 0xF0, 0x44, 0x09, 0x1E, 0xF0, 0xFC, 0x09, |
13987 | 0x00, 0xF0, 0x38, 0x09, 0x30, 0x44, 0x06, 0x12, 0x9E, 0xE7, 0x42, 0x00, 0xB8, 0x10, 0x04, 0xF6, |
13988 | 0x01, 0x00, 0xB3, 0x45, 0x74, 0x12, 0x04, 0x80, 0x18, 0xE4, 0x20, 0x00, 0x22, 0x13, 0x4B, 0xE4, |
13989 | 0x02, 0x00, 0x36, 0x12, 0x4B, 0xE4, 0x28, 0x00, 0xAC, 0x13, 0x00, 0xF2, 0xBC, 0x11, 0x00, 0xF2, |
13990 | 0xC8, 0x11, 0x03, 0xF6, 0xD0, 0x00, 0xFA, 0x14, 0x82, 0xE7, 0x01, 0x00, 0x00, 0xF0, 0x80, 0x01, |
13991 | 0x9E, 0xE7, 0x44, 0x00, 0x4B, 0xE4, 0x02, 0x00, 0x06, 0x12, 0x03, 0xE6, 0x02, 0x00, 0x76, 0x10, |
13992 | 0x00, 0xF2, 0xA2, 0x0D, 0x03, 0xE6, 0x02, 0x00, 0x6C, 0x10, 0x00, 0xF2, 0xA2, 0x0D, 0x19, 0x82, |
13993 | 0x34, 0x46, 0x0A, 0x13, 0x03, 0xE6, 0x02, 0x00, 0x9E, 0xE7, 0x43, 0x00, 0x68, 0x10, 0x04, 0x80, |
13994 | 0x30, 0xE4, 0x20, 0x00, 0x04, 0x40, 0x00, 0xF2, 0xBC, 0x11, 0x00, 0xF2, 0xC8, 0x11, 0x82, 0xE7, |
13995 | 0x01, 0x00, 0x06, 0xF7, 0x02, 0x00, 0x00, 0xF0, 0x08, 0x03, 0x04, 0x80, 0x18, 0xE4, 0x20, 0x00, |
13996 | 0x06, 0x12, 0x03, 0xE6, 0x02, 0x00, 0x3E, 0x10, 0x04, 0x80, 0x18, 0xE4, 0x02, 0x00, 0x3A, 0x12, |
13997 | 0x04, 0x80, 0x18, 0xE4, 0xFD, 0x00, 0x04, 0x40, 0x1C, 0x1C, 0x9D, 0xF0, 0xEA, 0x09, 0x1C, 0x1C, |
13998 | 0x9D, 0xF0, 0xF0, 0x09, 0xC1, 0x10, 0x9E, 0xE7, 0x13, 0x00, 0x0A, 0x10, 0x9E, 0xE7, 0x41, 0x00, |
13999 | 0x04, 0x10, 0x9E, 0xE7, 0x24, 0x00, 0x00, 0xFC, 0xBE, 0x00, 0x98, 0x57, 0xD5, 0xF0, 0x8A, 0x02, |
14000 | 0x04, 0xE6, 0x04, 0x00, 0x06, 0x10, 0x04, 0xE6, 0x04, 0x00, 0x9D, 0x41, 0x1C, 0x42, 0x9F, 0xE7, |
14001 | 0x00, 0x00, 0x06, 0xF7, 0x02, 0x00, 0x03, 0xF6, 0xE0, 0x00, 0x3C, 0x14, 0x44, 0x58, 0x45, 0x58, |
14002 | 0x00, 0xF2, 0xF6, 0x0D, 0x00, 0xF2, 0x7E, 0x10, 0x00, 0xF2, 0xC6, 0x0F, 0x3C, 0x14, 0x1E, 0x1C, |
14003 | 0x00, 0xF0, 0x80, 0x01, 0x12, 0x1C, 0x22, 0x1C, 0xD2, 0x14, 0x00, 0xF0, 0x72, 0x01, 0x83, 0x59, |
14004 | 0x03, 0xDC, 0x73, 0x57, 0x80, 0x5D, 0x00, 0x16, 0x83, 0x59, 0x03, 0xDC, 0x38, 0x54, 0x70, 0x57, |
14005 | 0x33, 0x54, 0x3B, 0x54, 0x80, 0x5D, 0x00, 0x16, 0x03, 0x57, 0x83, 0x59, 0x38, 0x54, 0x00, 0xCC, |
14006 | 0x00, 0x16, 0x03, 0x57, 0x83, 0x59, 0x00, 0x4C, 0x00, 0x16, 0x02, 0x80, 0x48, 0xE4, 0x01, 0x00, |
14007 | 0x0E, 0x12, 0x48, 0xE4, 0x05, 0x00, 0x08, 0x12, 0x00, 0xF2, 0xBC, 0x11, 0x00, 0xF2, 0xC8, 0x11, |
14008 | 0xC1, 0x5A, 0x3A, 0x55, 0x02, 0xEC, 0xB5, 0x00, 0x45, 0x59, 0x00, 0xF2, 0xF6, 0x0D, 0x83, 0x58, |
14009 | 0x30, 0xE7, 0x00, 0x00, 0x10, 0x4D, 0x30, 0xE7, 0x40, 0x00, 0x10, 0x4F, 0x38, 0x90, 0xBA, 0x90, |
14010 | 0x10, 0x5C, 0x80, 0x5C, 0x83, 0x5A, 0x10, 0x4E, 0x04, 0xEA, 0xB5, 0x00, 0x43, 0x5B, 0x03, 0xF4, |
14011 | 0xE0, 0x00, 0x83, 0x59, 0x04, 0xCC, 0x01, 0x4A, 0x0A, 0x12, 0x45, 0x5A, 0x00, 0xF2, 0xF6, 0x0D, |
14012 | 0x00, 0xF2, 0x38, 0x10, 0x00, 0x16, 0x08, 0x1C, 0x00, 0xFC, 0xAC, 0x00, 0x06, 0x58, 0x67, 0x18, |
14013 | 0x18, 0xF4, 0x8F, 0xE1, 0x01, 0xFC, 0xAE, 0x00, 0x19, 0xF4, 0x70, 0x1E, 0xB0, 0x54, 0x07, 0x58, |
14014 | 0x00, 0xFC, 0xB0, 0x00, 0x08, 0x58, 0x00, 0xFC, 0xB2, 0x00, 0x09, 0x58, 0x0A, 0x1C, 0x00, 0xE6, |
14015 | 0x0F, 0x00, 0x00, 0xEA, 0xB9, 0x00, 0x38, 0x54, 0x00, 0xFA, 0x24, 0x01, 0x00, 0xFA, 0xB6, 0x00, |
14016 | 0x18, 0x1C, 0x14, 0x1C, 0x10, 0x1C, 0x32, 0x1C, 0x12, 0x1C, 0x00, 0x16, 0x3E, 0x57, 0x0C, 0x14, |
14017 | 0x0E, 0x47, 0x07, 0xE6, 0x10, 0x00, 0xCE, 0x47, 0xF5, 0x13, 0x00, 0x16, 0x00, 0xF2, 0xA2, 0x0D, |
14018 | 0x02, 0x4B, 0x03, 0xF6, 0xE0, 0x00, 0x00, 0xF2, 0x68, 0x0A, 0x01, 0x48, 0x20, 0x12, 0x44, 0x58, |
14019 | 0x45, 0x58, 0x9E, 0xE7, 0x15, 0x00, 0x9C, 0xE7, 0x04, 0x00, 0x00, 0xF2, 0xF6, 0x0D, 0x00, 0xF2, |
14020 | 0x7E, 0x10, 0x00, 0xF2, 0xC6, 0x0F, 0x00, 0xF2, 0x7A, 0x0A, 0x1E, 0x1C, 0xD5, 0x10, 0x00, 0x16, |
14021 | 0x69, 0x08, 0x48, 0xE4, 0x04, 0x00, 0x64, 0x12, 0x48, 0xE4, 0x02, 0x00, 0x20, 0x12, 0x48, 0xE4, |
14022 | 0x03, 0x00, 0x1A, 0x12, 0x48, 0xE4, 0x08, 0x00, 0x14, 0x12, 0x48, 0xE4, 0x01, 0x00, 0xF0, 0x12, |
14023 | 0x48, 0xE4, 0x07, 0x00, 0x12, 0x12, 0x01, 0xE6, 0x07, 0x00, 0x00, 0xF2, 0x4E, 0x0D, 0x00, 0xF2, |
14024 | 0x12, 0x11, 0x05, 0xF0, 0x60, 0x0B, 0x00, 0x16, 0x00, 0xE6, 0x01, 0x00, 0x00, 0xEA, 0x99, 0x00, |
14025 | 0x02, 0x80, 0x48, 0xE4, 0x03, 0x00, 0xE7, 0x12, 0x48, 0xE4, 0x06, 0x00, 0xE1, 0x12, 0x01, 0xE6, |
14026 | 0x06, 0x00, 0x00, 0xF2, 0x4E, 0x0D, 0x00, 0xF2, 0x12, 0x11, 0x04, 0xE6, 0x02, 0x00, 0x9E, 0xE7, |
14027 | 0x15, 0x00, 0x01, 0xF0, 0x1C, 0x0A, 0x00, 0xF0, 0x02, 0x0A, 0x00, 0x16, 0x02, 0x80, 0x48, 0xE4, |
14028 | 0x10, 0x00, 0x1C, 0x12, 0x82, 0xE7, 0x08, 0x00, 0x3C, 0x56, 0x03, 0x82, 0x00, 0xF2, 0xE2, 0x0D, |
14029 | 0x30, 0xE7, 0x08, 0x00, 0x04, 0xF7, 0x70, 0x01, 0x06, 0xF7, 0x02, 0x00, 0x00, 0xF0, 0x80, 0x01, |
14030 | 0x6C, 0x19, 0xED, 0x19, 0x5D, 0xF0, 0xD4, 0x0B, 0x44, 0x55, 0xE5, 0x55, 0x59, 0xF0, 0x52, 0x0C, |
14031 | 0x04, 0x55, 0xA5, 0x55, 0x1F, 0x80, 0x01, 0xEC, 0xB8, 0x00, 0x82, 0x48, 0x82, 0x80, 0x49, 0x44, |
14032 | 0x2E, 0x13, 0x01, 0xEC, 0xB8, 0x00, 0x41, 0xE4, 0x02, 0x00, 0x01, 0xEA, 0xB8, 0x00, 0x49, 0xE4, |
14033 | 0x11, 0x00, 0x59, 0xF0, 0x2E, 0x0C, 0x01, 0xE6, 0x17, 0x00, 0x01, 0xEA, 0xB8, 0x00, 0x02, 0x4B, |
14034 | 0x88, 0x90, 0xAC, 0x50, 0x8A, 0x90, 0xAE, 0x50, 0x01, 0xEC, 0xB8, 0x00, 0x82, 0x48, 0x82, 0x80, |
14035 | 0x10, 0x44, 0x02, 0x4B, 0x1F, 0x40, 0xC0, 0x44, 0x00, 0xF2, 0xB4, 0x0D, 0x04, 0x55, 0xA5, 0x55, |
14036 | 0x9F, 0x10, 0x0C, 0x51, 0x8E, 0x51, 0x30, 0x90, 0xB2, 0x90, 0x00, 0x56, 0xA1, 0x56, 0x30, 0x50, |
14037 | 0xB2, 0x50, 0x34, 0x90, 0xB6, 0x90, 0x40, 0x56, 0xE1, 0x56, 0x34, 0x50, 0xB6, 0x50, 0x65, 0x10, |
14038 | 0xB1, 0xF0, 0x70, 0x0C, 0x85, 0xF0, 0xCA, 0x0B, 0xE9, 0x09, 0x4B, 0xE4, 0x03, 0x00, 0x78, 0x12, |
14039 | 0x4B, 0xE4, 0x02, 0x00, 0x01, 0x13, 0xB1, 0xF0, 0x86, 0x0C, 0x85, 0xF0, 0xCA, 0x0B, 0x69, 0x08, |
14040 | 0x48, 0xE4, 0x03, 0x00, 0xD5, 0xF0, 0x86, 0x0B, 0x00, 0xF2, 0x12, 0x11, 0x85, 0xF0, 0xCA, 0x0B, |
14041 | 0xE8, 0x09, 0x3C, 0x56, 0x00, 0xFC, 0x20, 0x01, 0x98, 0x57, 0x02, 0x13, 0xBB, 0x45, 0x4B, 0xE4, |
14042 | 0x00, 0x00, 0x08, 0x12, 0x03, 0xE6, 0x01, 0x00, 0x04, 0xF6, 0x00, 0x80, 0xA8, 0x14, 0xD2, 0x14, |
14043 | 0x30, 0x1C, 0x02, 0x80, 0x48, 0xE4, 0x03, 0x00, 0x10, 0x13, 0x00, 0xFC, 0xB6, 0x00, 0x98, 0x57, |
14044 | 0x02, 0x13, 0x4C, 0x1C, 0x3E, 0x1C, 0x00, 0xF0, 0x8E, 0x0B, 0x00, 0xFC, 0x24, 0x01, 0xB0, 0x57, |
14045 | 0x00, 0xFA, 0x24, 0x01, 0x4C, 0x1C, 0x3E, 0x1C, 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0x8E, 0x0B, |
14046 | 0x00, 0xF2, 0x8C, 0x0E, 0x00, 0xF0, 0x8E, 0x0B, 0xB1, 0xF0, 0xF8, 0x0C, 0x85, 0xF0, 0x86, 0x0B, |
14047 | 0x69, 0x08, 0x48, 0xE4, 0x01, 0x00, 0xD5, 0xF0, 0x86, 0x0B, 0xFC, 0x14, 0x42, 0x58, 0x6C, 0x14, |
14048 | 0x80, 0x14, 0x30, 0x1C, 0x4A, 0xF4, 0x02, 0x00, 0x55, 0xF0, 0x86, 0x0B, 0x4A, 0xF4, 0x01, 0x00, |
14049 | 0x0E, 0x12, 0x02, 0x80, 0x48, 0xE4, 0x03, 0x00, 0x06, 0x13, 0x3E, 0x1C, 0x00, 0xF0, 0x8E, 0x0B, |
14050 | 0x00, 0xFC, 0xB6, 0x00, 0xB0, 0x57, 0x00, 0xFA, 0xB6, 0x00, 0x4C, 0x1C, 0x3E, 0x1C, 0x00, 0xF2, |
14051 | 0x12, 0x11, 0x86, 0xF0, 0x8E, 0x0B, 0x00, 0xF2, 0xBA, 0x0E, 0x00, 0xF0, 0x8E, 0x0B, 0x4C, 0x1C, |
14052 | 0xB1, 0xF0, 0x50, 0x0D, 0x85, 0xF0, 0x5C, 0x0D, 0x69, 0x08, 0xF3, 0x10, 0x86, 0xF0, 0x64, 0x0D, |
14053 | 0x4E, 0x1C, 0x89, 0x48, 0x00, 0x16, 0x00, 0xF6, 0x00, 0x01, 0x00, 0x57, 0x00, 0x57, 0x03, 0x58, |
14054 | 0x00, 0xDC, 0x18, 0xF4, 0xFF, 0x7F, 0x30, 0x56, 0x00, 0x5C, 0x00, 0x16, 0x00, 0xF6, 0x00, 0x01, |
14055 | 0x00, 0x57, 0x00, 0x57, 0x03, 0x58, 0x00, 0xDC, 0x18, 0xF4, 0x00, 0x80, 0x30, 0x56, 0x00, 0x5C, |
14056 | 0x00, 0x16, 0x00, 0xF6, 0x00, 0x01, 0x00, 0x57, 0x00, 0x57, 0x03, 0x58, 0x00, 0xDC, 0x0B, 0x58, |
14057 | 0x00, 0x16, 0x03, 0xF6, 0x24, 0x01, 0x00, 0xF2, 0x58, 0x0A, 0x03, 0xF6, 0xB6, 0x00, 0x00, 0xF2, |
14058 | 0x58, 0x0A, 0x00, 0x16, 0x02, 0xEC, 0xB8, 0x00, 0x02, 0x49, 0x18, 0xF4, 0xFF, 0x00, 0x00, 0x54, |
14059 | 0x00, 0x54, 0x00, 0x54, 0x00, 0xF4, 0x08, 0x00, 0xE1, 0x18, 0x80, 0x54, 0x03, 0x58, 0x00, 0xDD, |
14060 | 0x01, 0xDD, 0x02, 0xDD, 0x03, 0xDC, 0x02, 0x4B, 0x30, 0x50, 0xB2, 0x50, 0x34, 0x51, 0xB6, 0x51, |
14061 | 0x00, 0x16, 0x45, 0x5A, 0x1D, 0xF4, 0xFF, 0x00, 0x85, 0x56, 0x85, 0x56, 0x85, 0x56, 0x05, 0xF4, |
14062 | 0x02, 0x12, 0x83, 0x5A, 0x00, 0x16, 0x1D, 0xF4, 0xFF, 0x00, 0x85, 0x56, 0x85, 0x56, 0x85, 0x56, |
14063 | 0x05, 0xF4, 0x00, 0x12, 0x83, 0x5A, 0x00, 0x16, 0x38, 0x54, 0xBB, 0x55, 0x3C, 0x56, 0xBD, 0x56, |
14064 | 0x00, 0xF2, 0x12, 0x11, 0x85, 0xF0, 0x82, 0x0E, 0xE9, 0x09, 0xC1, 0x59, 0x00, 0xF2, 0x12, 0x11, |
14065 | 0x85, 0xF0, 0x82, 0x0E, 0xE8, 0x0A, 0x83, 0x55, 0x83, 0x55, 0x4B, 0xF4, 0x90, 0x01, 0x5C, 0xF0, |
14066 | 0x36, 0x0E, 0xBD, 0x56, 0x40, 0x10, 0x4B, 0xF4, 0x30, 0x00, 0x59, 0xF0, 0x48, 0x0E, 0x01, 0xF6, |
14067 | 0x0C, 0x00, 0x00, 0xF6, 0x01, 0x00, 0x2E, 0x10, 0x02, 0xFC, 0x9C, 0x00, 0x9A, 0x57, 0x14, 0x13, |
14068 | 0x4B, 0xF4, 0x64, 0x00, 0x59, 0xF0, 0x64, 0x0E, 0x03, 0xF6, 0x64, 0x00, 0x01, 0xF6, 0x19, 0x00, |
14069 | 0x00, 0xF6, 0x01, 0x00, 0x43, 0xF4, 0x33, 0x00, 0x56, 0xF0, 0x76, 0x0E, 0x04, 0xF4, 0x00, 0x01, |
14070 | 0x43, 0xF4, 0x19, 0x00, 0xF3, 0x10, 0xB4, 0x56, 0xC3, 0x58, 0x02, 0xFC, 0x9E, 0x00, 0x9A, 0x57, |
14071 | 0x08, 0x13, 0x3C, 0x56, 0x00, 0xF6, 0x02, 0x00, 0x00, 0x16, 0x00, 0x16, 0x09, 0xE7, 0x01, 0x00, |
14072 | 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0xB8, 0x0E, 0x09, 0xE7, 0x02, 0x00, 0x00, 0xF2, 0x12, 0x11, |
14073 | 0x86, 0xF0, 0xB8, 0x0E, 0x09, 0xE7, 0x03, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0xB8, 0x0E, |
14074 | 0x4E, 0x1C, 0x89, 0x49, 0x00, 0xF2, 0x12, 0x11, 0x00, 0x16, 0x09, 0xE7, 0x01, 0x00, 0x00, 0xF2, |
14075 | 0x12, 0x11, 0x86, 0xF0, 0xF2, 0x0E, 0x09, 0xE7, 0x03, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, |
14076 | 0xF2, 0x0E, 0x09, 0xE7, 0x01, 0x00, 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0xF2, 0x0E, 0x89, 0x49, |
14077 | 0x00, 0xF2, 0x12, 0x11, 0x86, 0xF0, 0xF2, 0x0E, 0x4E, 0x1C, 0x89, 0x4A, 0x00, 0xF2, 0x12, 0x11, |
14078 | 0x00, 0x16, 0x3C, 0x56, 0x00, 0x16, 0x00, 0xEC, 0x26, 0x01, 0x48, 0xE4, 0x01, 0x00, 0x1E, 0x13, |
14079 | 0x38, 0x44, 0x00, 0xEA, 0x26, 0x01, 0x49, 0xF4, 0x00, 0x00, 0x04, 0x12, 0x4E, 0x1C, 0x02, 0x10, |
14080 | 0x4C, 0x1C, 0x01, 0xEC, 0x27, 0x01, 0x89, 0x48, 0x00, 0xF2, 0x12, 0x11, 0x02, 0x14, 0x00, 0x16, |
14081 | 0x85, 0xF0, 0x52, 0x0F, 0x38, 0x54, 0x00, 0xEA, 0x99, 0x00, 0x00, 0xF2, 0x60, 0x0B, 0x02, 0x80, |
14082 | 0x48, 0xE4, 0x06, 0x00, 0x1C, 0x13, 0x00, 0xEC, 0x99, 0x00, 0x48, 0xE4, 0x01, 0x00, 0x0A, 0x12, |
14083 | 0x04, 0x80, 0x30, 0xE4, 0x01, 0x00, 0x04, 0x40, 0x08, 0x10, 0x04, 0x80, 0x18, 0xE4, 0xFE, 0x00, |
14084 | 0x04, 0x40, 0x00, 0x16, 0x02, 0xF6, 0xE0, 0x00, 0x02, 0x57, 0x03, 0x59, 0x01, 0xCC, 0x81, 0x48, |
14085 | 0x22, 0x12, 0x00, 0x4E, 0x83, 0x5A, 0x90, 0x4C, 0x20, 0xE7, 0x00, 0x00, 0xC3, 0x58, 0x1B, 0xF4, |
14086 | 0xFF, 0x00, 0x83, 0x55, 0x83, 0x55, 0x83, 0x55, 0x03, 0xF4, 0x00, 0x12, 0x8B, 0x55, 0x83, 0x59, |
14087 | 0x00, 0x4E, 0x00, 0x16, 0x00, 0x4E, 0x02, 0xF6, 0xF0, 0x00, 0x02, 0x57, 0x03, 0x59, 0x00, 0x4E, |
14088 | 0x83, 0x5A, 0x30, 0xE7, 0x00, 0x00, 0x20, 0xE7, 0x00, 0x00, 0x00, 0x16, 0x02, 0xF6, 0xF0, 0x00, |
14089 | 0x02, 0x57, 0x03, 0x59, 0x01, 0xCC, 0x00, 0x4E, 0x83, 0x5A, 0x30, 0xE7, 0x00, 0x00, 0x80, 0x4C, |
14090 | 0xC3, 0x58, 0x1B, 0xF4, 0xFF, 0x00, 0x83, 0x55, 0x83, 0x55, 0x83, 0x55, 0x03, 0xF4, 0x00, 0x12, |
14091 | 0x83, 0x59, 0x00, 0x4E, 0x00, 0x16, 0x03, 0xF6, 0xE0, 0x00, 0x03, 0x57, 0x83, 0x59, 0x3A, 0x55, |
14092 | 0x02, 0xCC, 0x45, 0x5A, 0x00, 0xF2, 0xF6, 0x0D, 0xC0, 0x5A, 0x40, 0x5C, 0x38, 0x54, 0x00, 0xCD, |
14093 | 0x01, 0xCC, 0x4A, 0x46, 0x0A, 0x13, 0x83, 0x59, 0x00, 0x4C, 0x01, 0x48, 0x16, 0x13, 0x0C, 0x10, |
14094 | 0xC5, 0x58, 0x00, 0xF2, 0xF6, 0x0D, 0x00, 0x4C, 0x01, 0x48, 0x08, 0x13, 0x05, 0xF6, 0xF0, 0x00, |
14095 | 0x05, 0x57, 0x08, 0x10, 0x45, 0x58, 0x00, 0xF2, 0xF6, 0x0D, 0x8D, 0x56, 0x83, 0x5A, 0x80, 0x4C, |
14096 | 0x05, 0x17, 0x00, 0x16, 0x02, 0x4B, 0x06, 0xF7, 0x04, 0x00, 0x62, 0x0B, 0x03, 0x82, 0x00, 0xF2, |
14097 | 0xE2, 0x0D, 0x02, 0x80, 0x00, 0x4C, 0x45, 0xF4, 0x02, 0x00, 0x52, 0x14, 0x06, 0xF7, 0x02, 0x00, |
14098 | 0x06, 0x14, 0x00, 0xF2, 0x54, 0x0F, 0x00, 0x16, 0x02, 0x4B, 0x01, 0xF6, 0xFF, 0x00, 0x38, 0x1C, |
14099 | 0x05, 0xF4, 0x04, 0x00, 0x83, 0x5A, 0x18, 0xDF, 0x19, 0xDF, 0x1D, 0xF7, 0x3C, 0x00, 0xB8, 0xF0, |
14100 | 0x4E, 0x10, 0x9C, 0x14, 0x01, 0x48, 0x1C, 0x13, 0x0E, 0xF7, 0x3C, 0x00, 0x03, 0xF7, 0x04, 0x00, |
14101 | 0xAF, 0x19, 0x03, 0x42, 0x45, 0xF4, 0x02, 0x00, 0x83, 0x5A, 0x02, 0xCC, 0x02, 0x41, 0x45, 0xF4, |
14102 | 0x02, 0x00, 0x00, 0x16, 0x91, 0x44, 0xD5, 0xF0, 0x3E, 0x10, 0x00, 0xF0, 0x9E, 0x02, 0x01, 0xF6, |
14103 | 0xFF, 0x00, 0x38, 0x1C, 0x05, 0xF4, 0x04, 0x00, 0x83, 0x5A, 0x18, 0xDF, 0x19, 0xDF, 0x0E, 0xF7, |
14104 | 0x3C, 0x00, 0x03, 0xF7, 0x04, 0x00, 0x0F, 0x79, 0x1C, 0xF7, 0x3C, 0x00, 0xB8, 0xF0, 0x9C, 0x10, |
14105 | 0x4E, 0x14, 0x01, 0x48, 0x06, 0x13, 0x45, 0xF4, 0x04, 0x00, 0x00, 0x16, 0x91, 0x44, 0xD5, 0xF0, |
14106 | 0x82, 0x10, 0x00, 0xF0, 0x9E, 0x02, 0x02, 0xF6, 0xFF, 0x00, 0x38, 0x1C, 0x2C, 0xBC, 0xAE, 0xBC, |
14107 | 0xE2, 0x08, 0x00, 0xEC, 0xB8, 0x00, 0x02, 0x48, 0x1D, 0xF7, 0x80, 0x00, 0xB8, 0xF0, 0xCC, 0x10, |
14108 | 0x1E, 0x14, 0x01, 0x48, 0x0E, 0x13, 0x0E, 0xF7, 0x80, 0x00, 0x38, 0x54, 0x03, 0x58, 0xAF, 0x19, |
14109 | 0x82, 0x48, 0x00, 0x16, 0x82, 0x48, 0x12, 0x45, 0xD5, 0xF0, 0xBA, 0x10, 0x00, 0xF0, 0x9E, 0x02, |
14110 | 0x39, 0xF0, 0xF8, 0x10, 0x38, 0x44, 0x00, 0x16, 0x7E, 0x18, 0x18, 0xF4, 0x03, 0x00, 0x04, 0x13, |
14111 | 0x61, 0x18, 0x00, 0x16, 0x38, 0x1C, 0x00, 0xFC, 0x22, 0x01, 0x18, 0xF4, 0x01, 0x00, 0xF1, 0x12, |
14112 | 0xE3, 0x10, 0x30, 0x44, 0x30, 0x44, 0x30, 0x44, 0xB1, 0xF0, 0x18, 0x11, 0x00, 0x16, 0x3E, 0x57, |
14113 | 0x03, 0xF6, 0xE0, 0x00, 0x03, 0x57, 0x83, 0x59, 0x04, 0xCC, 0x01, 0x4A, 0x6A, 0x12, 0x45, 0x5A, |
14114 | 0x00, 0xF2, 0xF6, 0x0D, 0x02, 0x4B, 0x70, 0x14, 0x34, 0x13, 0x02, 0x80, 0x48, 0xE4, 0x08, 0x00, |
14115 | 0x18, 0x12, 0x9C, 0xE7, 0x02, 0x00, 0x9E, 0xE7, 0x15, 0x00, 0x00, 0xF2, 0xC6, 0x0F, 0x00, 0xF2, |
14116 | 0x7A, 0x0A, 0x1E, 0x1C, 0x01, 0xF6, 0x01, 0x00, 0x00, 0x16, 0x30, 0xE4, 0x10, 0x00, 0x04, 0x40, |
14117 | 0x00, 0xF2, 0xE2, 0x0D, 0x20, 0xE7, 0x01, 0x00, 0x01, 0xF6, 0x01, 0x00, 0x00, 0x16, 0x04, 0xDC, |
14118 | 0x01, 0x4A, 0x24, 0x12, 0x45, 0x5A, 0x00, 0xF2, 0xF6, 0x0D, 0x43, 0x5B, 0x06, 0xEC, 0x98, 0x00, |
14119 | 0x00, 0xF2, 0x38, 0x10, 0xC6, 0x59, 0x20, 0x14, 0x0A, 0x13, 0x00, 0xF2, 0xC6, 0x0F, 0x00, 0xF2, |
14120 | 0x14, 0x10, 0xA7, 0x10, 0x83, 0x5A, 0xD7, 0x10, 0x0E, 0x47, 0x07, 0xE6, 0x10, 0x00, 0xCE, 0x47, |
14121 | 0x5A, 0xF0, 0x20, 0x11, 0xB9, 0x54, 0x00, 0x16, 0x14, 0x90, 0x96, 0x90, 0x02, 0xFC, 0xA8, 0x00, |
14122 | 0x03, 0xFC, 0xAA, 0x00, 0x48, 0x55, 0x02, 0x13, 0xC9, 0x55, 0x00, 0x16, 0x00, 0xEC, 0xBA, 0x00, |
14123 | 0x10, 0x44, 0x00, 0xEA, 0xBA, 0x00, 0x00, 0x16, 0x03, 0xF6, 0xC0, 0x00, 0x00, 0xF2, 0x68, 0x0A, |
14124 | 0x10, 0x44, 0x00, 0x4C, 0x00, 0x16 |
14125 | }; |
14126 | |
14127 | unsigned short _adv_mcode_size ASC_INITDATA = |
14128 | sizeof(_adv_mcode_buf); /* 0x11D6 */ |
14129 | unsigned long _adv_mcode_chksum ASC_INITDATA = 0x03494981UL; |
14130 | |
14131 | /* a_init.c */ |
14132 | /* |
14133 | * EEPROM Configuration. |
14134 | * |
14135 | * All drivers should use this structure to set the default EEPROM |
14136 | * configuration. The BIOS now uses this structure when it is built. |
14137 | * Additional structure information can be found in a_condor.h where |
14138 | * the structure is defined. |
14139 | */ |
14140 | STATICstatic ADVEEP_CONFIG |
14141 | Default_EEPROM_Config ASC_INITDATA = { |
14142 | ADV_EEPROM_BIOS_ENABLE0x4000, /* cfg_msw */ |
14143 | 0x0000, /* cfg_lsw */ |
14144 | 0xFFFF, /* disc_enable */ |
14145 | 0xFFFF, /* wdtr_able */ |
14146 | 0xFFFF, /* sdtr_able */ |
14147 | 0xFFFF, /* start_motor */ |
14148 | 0xFFFF, /* tagqng_able */ |
14149 | 0xFFFF, /* bios_scan */ |
14150 | 0, /* scam_tolerant */ |
14151 | 7, /* adapter_scsi_id */ |
14152 | 0, /* bios_boot_delay */ |
14153 | 3, /* scsi_reset_delay */ |
14154 | 0, /* bios_id_lun */ |
14155 | 0, /* termination */ |
14156 | 0, /* reserved1 */ |
14157 | 0xFFEF, /* bios_ctrl */ |
14158 | 0xFFFF, /* ultra_able */ |
14159 | 0, /* reserved2 */ |
14160 | ASC_DEF_MAX_HOST_QNG0xFD, /* max_host_qng */ |
14161 | ASC_DEF_MAX_DVC_QNG0x3F, /* max_dvc_qng */ |
14162 | 0, /* dvc_cntl */ |
14163 | 0, /* bug_fix */ |
14164 | 0, /* serial_number_word1 */ |
14165 | 0, /* serial_number_word2 */ |
14166 | 0, /* serial_number_word3 */ |
14167 | 0, /* check_sum */ |
14168 | { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }, /* oem_name[16] */ |
14169 | 0, /* dvc_err_code */ |
14170 | 0, /* adv_err_code */ |
14171 | 0, /* adv_err_addr */ |
14172 | 0, /* saved_dvc_err_code */ |
14173 | 0, /* saved_adv_err_code */ |
14174 | 0, /* saved_adv_err_addr */ |
14175 | 0 /* num_of_err */ |
14176 | }; |
14177 | |
14178 | /* |
14179 | * Initialize the ADV_DVC_VAR structure. |
14180 | * |
14181 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
14182 | * |
14183 | * For a non-fatal error return a warning code. If there are no warnings |
14184 | * then 0 is returned. |
14185 | */ |
14186 | ASC_INITFUNC(int AdvInitGetConfig(ADV_DVC_VAR *asc_dvc) |
14187 | intint AdvInitGetConfig(ADV_DVC_VAR *asc_dvc) |
14188 | AdvInitGetConfig(ADV_DVC_VAR *asc_dvc)int AdvInitGetConfig(ADV_DVC_VAR *asc_dvc) |
14189 | )int AdvInitGetConfig(ADV_DVC_VAR *asc_dvc) |
14190 | { |
14191 | ushort warn_code; |
14192 | AdvPortAddrunsigned long iop_base; |
14193 | uchar pci_cmd_reg; |
14194 | int status; |
14195 | |
14196 | warn_code = 0; |
14197 | asc_dvc->err_code = 0; |
14198 | iop_base = asc_dvc->iop_base; |
14199 | |
14200 | /* |
14201 | * PCI Command Register |
14202 | */ |
14203 | |
14204 | if (((pci_cmd_reg = DvcAdvReadPCIConfigByte(asc_dvc, |
14205 | AscPCIConfigCommandRegister0x0004)) |
14206 | & AscPCICmdRegBits_BusMastering0x0007) |
14207 | != AscPCICmdRegBits_BusMastering0x0007) |
14208 | { |
14209 | pci_cmd_reg |= AscPCICmdRegBits_BusMastering0x0007; |
14210 | |
14211 | DvcAdvWritePCIConfigByte(asc_dvc, |
14212 | AscPCIConfigCommandRegister0x0004, pci_cmd_reg); |
14213 | |
14214 | if (((DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigCommandRegister0x0004)) |
14215 | & AscPCICmdRegBits_BusMastering0x0007) |
14216 | != AscPCICmdRegBits_BusMastering0x0007) |
14217 | { |
14218 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
14219 | } |
14220 | } |
14221 | |
14222 | /* |
14223 | * PCI Latency Timer |
14224 | * |
14225 | * If the "latency timer" register is 0x20 or above, then we don't need |
14226 | * to change it. Otherwise, set it to 0x20 (i.e. set it to 0x20 if it |
14227 | * comes up less than 0x20). |
14228 | */ |
14229 | if (DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer0x000D) < 0x20) { |
14230 | DvcAdvWritePCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer0x000D, 0x20); |
14231 | if (DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer0x000D) < 0x20) |
14232 | { |
14233 | warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE0x0080; |
14234 | } |
14235 | } |
14236 | |
14237 | /* |
14238 | * Save the state of the PCI Configuration Command Register |
14239 | * "Parity Error Response Control" Bit. If the bit is clear (0), |
14240 | * in AdvInitAsc3550Driver() tell the microcode to ignore DMA |
14241 | * parity errors. |
14242 | */ |
14243 | asc_dvc->cfg->control_flag = 0; |
14244 | if (((DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigCommandRegister0x0004) |
14245 | & AscPCICmdRegBits_ParErrRespCtrl0x0040)) == 0) |
14246 | { |
14247 | asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR0x0001; |
14248 | } |
14249 | |
14250 | asc_dvc->cur_host_qng = 0; |
14251 | |
14252 | asc_dvc->cfg->lib_version = (ADV_LIB_VERSION_MAJOR3 << 8) | |
14253 | ADV_LIB_VERSION_MINOR45; |
14254 | asc_dvc->cfg->chip_version = |
14255 | AdvGetChipVersion(iop_base, asc_dvc->bus_type)((*(volatile unsigned char *) (((iop_base)) + (0x03)))); |
14256 | |
14257 | /* |
14258 | * Reset the chip to start and allow register writes. |
14259 | */ |
14260 | if (AdvFindSignature(iop_base)(((((*(volatile unsigned char *) (((iop_base)) + (0x01)))) == 0x25) && (((*(volatile unsigned short *) (((iop_base )) + (0x00)))) == 0x04C1)) ? 1 : 0) == 0) |
14261 | { |
14262 | asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE0x0200; |
14263 | return ADV_ERROR(-1); |
14264 | } |
14265 | else { |
14266 | |
14267 | AdvResetChip(asc_dvc); |
14268 | |
14269 | if ((status = AdvInitFromEEP(asc_dvc)) == ADV_ERROR(-1)) |
14270 | { |
14271 | return ADV_ERROR(-1); |
14272 | } |
14273 | warn_code |= status; |
14274 | |
14275 | /* |
14276 | * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus |
14277 | * Resets should be performed. |
14278 | */ |
14279 | if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS0x0200) |
14280 | { |
14281 | AdvResetSCSIBus(asc_dvc); |
14282 | } |
14283 | } |
14284 | |
14285 | return warn_code; |
14286 | } |
14287 | |
14288 | /* |
14289 | * Initialize the ASC3550. |
14290 | * |
14291 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
14292 | * |
14293 | * For a non-fatal error return a warning code. If there are no warnings |
14294 | * then 0 is returned. |
14295 | */ |
14296 | ASC_INITFUNC(int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) |
14297 | intint AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) |
14298 | AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) |
14299 | )int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) |
14300 | { |
14301 | AdvPortAddrunsigned long iop_base; |
14302 | ushort warn_code; |
14303 | ulong sum; |
14304 | int begin_addr; |
14305 | int end_addr; |
14306 | int code_sum; |
14307 | int word; |
14308 | int rql_addr; /* RISC Queue List address */ |
14309 | int i; |
14310 | ushort scsi_cfg1; |
14311 | uchar biosmem[ASC_MC_BIOSLEN0x0050]; /* BIOS RISC Memory 0x40-0x8F. */ |
14312 | |
14313 | /* If there is already an error, don't continue. */ |
14314 | if (asc_dvc->err_code != 0) |
14315 | { |
14316 | return ADV_ERROR(-1); |
14317 | } |
14318 | |
14319 | warn_code = 0; |
14320 | iop_base = asc_dvc->iop_base; |
14321 | |
14322 | /* |
14323 | * Save the RISC memory BIOS region before writing the microcode. |
14324 | * The BIOS may already be loaded and using its RISC LRAM region |
14325 | * so its region must be saved and restored. |
14326 | * |
14327 | * Note: This code makes the assumption, which is currently true, |
14328 | * that a chip reset does not clear RISC LRAM. |
14329 | */ |
14330 | for (i = 0; i < ASC_MC_BIOSLEN0x0050; i++) |
14331 | { |
14332 | AdvReadByteLram(iop_base, ASC_MC_BIOSMEM + i, biosmem[i])do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0040 + i))); (biosmem[i]) = (*(volatile unsigned char *) (( iop_base) + 0x06)); } while (0); |
14333 | } |
14334 | |
14335 | /* |
14336 | * Load the Microcode |
14337 | * |
14338 | * Write the microcode image to RISC memory starting at address 0. |
14339 | */ |
14340 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0)(((*(volatile unsigned short *) ((iop_base) + (0x04))) = ((0) ))); |
14341 | for (word = 0; word < _adv_mcode_size; word += 2) |
14342 | { |
14343 | AdvWriteWordAutoIncLram(iop_base,(((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((*((ushort *) (&_adv_mcode_buf[word])))))) |
14344 | *((ushort *) (&_adv_mcode_buf[word])))(((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((*((ushort *) (&_adv_mcode_buf[word])))))); |
14345 | } |
14346 | |
14347 | /* |
14348 | * Clear the rest of Condor's Internal RAM (8KB). |
14349 | */ |
14350 | for (; word < ADV_CONDOR_MEMSIZE0x2000; word += 2) |
14351 | { |
14352 | AdvWriteWordAutoIncLram(iop_base, 0)(((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((0))) ); |
14353 | } |
14354 | |
14355 | /* |
14356 | * Verify the microcode checksum. |
14357 | */ |
14358 | sum = 0; |
14359 | AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0)(((*(volatile unsigned short *) ((iop_base) + (0x04))) = ((0) ))); |
14360 | for (word = 0; word < _adv_mcode_size; word += 2) |
14361 | { |
14362 | sum += AdvReadWordAutoIncLram(iop_base)((*(volatile unsigned short *) ((iop_base) + 0x06))); |
14363 | } |
14364 | |
14365 | if (sum != _adv_mcode_chksum) |
14366 | { |
14367 | asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM0x0002; |
14368 | return ADV_ERROR(-1); |
14369 | } |
14370 | |
14371 | /* |
14372 | * Restore the RISC memory BIOS region. |
14373 | */ |
14374 | for (i = 0; i < ASC_MC_BIOSLEN0x0050; i++) |
14375 | { |
14376 | AdvWriteByteLram(iop_base, ASC_MC_BIOSMEM + i, biosmem[i])(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0040 + i))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((biosmem[i])))); |
14377 | } |
14378 | |
14379 | /* |
14380 | * Calculate and write the microcode code checksum to the microcode |
14381 | * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). |
14382 | */ |
14383 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0028))); (begin_addr) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
14384 | AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x002A))); (end_addr) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
14385 | code_sum = 0; |
14386 | for (word = begin_addr; word < end_addr; word += 2) |
14387 | { |
14388 | code_sum += *((ushort *) (&_adv_mcode_buf[word])); |
14389 | } |
14390 | AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x002C ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( code_sum)))); |
14391 | |
14392 | /* |
14393 | * Read microcode version and date. |
14394 | */ |
14395 | AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, asc_dvc->cfg->mcode_date)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0038))); (asc_dvc->cfg->mcode_date) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0); |
14396 | AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, asc_dvc->cfg->mcode_version)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x003A))); (asc_dvc->cfg->mcode_version) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0); |
14397 | |
14398 | /* |
14399 | * Initialize microcode operating variables |
14400 | */ |
14401 | AdvWriteWordLram(iop_base, ASC_MC_ADAPTER_SCSI_ID,(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0098 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( asc_dvc->chip_scsi_id)))) |
14402 | asc_dvc->chip_scsi_id)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0098 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( asc_dvc->chip_scsi_id)))); |
14403 | |
14404 | /* |
14405 | * If the PCI Configuration Command Register "Parity Error Response |
14406 | * Control" Bit was clear (0), then set the microcode variable |
14407 | * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode |
14408 | * to ignore DMA parity errors. |
14409 | */ |
14410 | if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR0x0001) |
14411 | { |
14412 | /* |
14413 | * Note: Don't remove the use of a temporary variable in |
14414 | * the following code, otherwise the Microsoft C compiler |
14415 | * will turn the following lines into a no-op. |
14416 | */ |
14417 | AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0122))); (word) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0); |
14418 | word |= CONTROL_FLAG_IGNORE_PERR0x0001; |
14419 | AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0122 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( word)))); |
14420 | } |
14421 | |
14422 | /* |
14423 | * Set default microcode operating variables for WDTR, SDTR, and |
14424 | * command tag queuing based on the EEPROM configuration values. |
14425 | * |
14426 | * These ADV_DVC_VAR fields and the microcode variables will be |
14427 | * changed in AdvInquiryHandling() if it is found a device is |
14428 | * incapable of a particular feature. |
14429 | */ |
14430 | |
14431 | /* |
14432 | * Set the microcode ULTRA target mask from EEPROM value. The |
14433 | * SDTR target mask overrides the ULTRA target mask in the |
14434 | * microcode so it is safe to set this value without determining |
14435 | * whether the device supports SDTR. |
14436 | * |
14437 | * Note: There is no way to know whether a device supports ULTRA |
14438 | * speed without attempting a SDTR ULTRA speed negotiation with |
14439 | * the device. The device will reject the speed if it does not |
14440 | * support it by responding with an SDTR message containing a |
14441 | * slower speed. |
14442 | */ |
14443 | AdvWriteWordLram(iop_base, ASC_MC_ULTRA_ABLE, asc_dvc->ultra_able)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x009C ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( asc_dvc->ultra_able)))); |
14444 | AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, asc_dvc->cfg->disc_enable)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00A2 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( asc_dvc->cfg->disc_enable)))); |
14445 | |
14446 | |
14447 | /* |
14448 | * Set SCSI_CFG0 Microcode Default Value. |
14449 | * |
14450 | * The microcode will set the SCSI_CFG0 register using this value |
14451 | * after it is started below. |
14452 | */ |
14453 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00AC ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( 0x2000 | 0x0040 | 0x0010 | asc_dvc->chip_scsi_id)))) |
14454 | PARITY_EN | SEL_TMO_LONG | OUR_ID_EN | asc_dvc->chip_scsi_id)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00AC ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( 0x2000 | 0x0040 | 0x0010 | asc_dvc->chip_scsi_id)))); |
14455 | |
14456 | /* |
14457 | * Determine SCSI_CFG1 Microcode Default Value. |
14458 | * |
14459 | * The microcode will set the SCSI_CFG1 register using this value |
14460 | * after it is started below. |
14461 | */ |
14462 | |
14463 | /* Read current SCSI_CFG1 Register value. */ |
14464 | scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1)((*(volatile unsigned short *) ((iop_base) + (0x0E)))); |
14465 | |
14466 | /* |
14467 | * If all three connectors are in use, return an error. |
14468 | */ |
14469 | if ((scsi_cfg1 & CABLE_ILLEGAL_A0x7) == 0 || |
14470 | (scsi_cfg1 & CABLE_ILLEGAL_B0xB) == 0) |
14471 | { |
14472 | asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION0x0400; |
14473 | return ADV_ERROR(-1); |
14474 | } |
14475 | |
14476 | /* |
14477 | * If the internal narrow cable is reversed all of the SCSI_CTRL |
14478 | * register signals will be set. Check for and return an error if |
14479 | * this condition is found. |
14480 | */ |
14481 | if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL)((*(volatile unsigned short *) ((iop_base) + (0x34)))) & 0x3F07) == 0x3F07) |
14482 | { |
14483 | asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE0x1000; |
14484 | return ADV_ERROR(-1); |
14485 | } |
14486 | |
14487 | /* |
14488 | * If this is a differential board and a single-ended device |
14489 | * is attached to one of the connectors, return an error. |
14490 | */ |
14491 | if ((scsi_cfg1 & DIFF_MODE0x0100) && (scsi_cfg1 & DIFF_SENSE0x0080) == 0) |
14492 | { |
14493 | asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE0x0800; |
14494 | return ADV_ERROR(-1); |
14495 | } |
14496 | |
14497 | /* |
14498 | * If automatic termination control is enabled, then set the |
14499 | * termination value based on a table listed in a_condor.h. |
14500 | * |
14501 | * If manual termination was specified with an EEPROM setting |
14502 | * then 'termination' was set-up in AdvInitFromEEP() and |
14503 | * is ready to be 'ored' into SCSI_CFG1. |
14504 | */ |
14505 | if (asc_dvc->cfg->termination == 0) |
14506 | { |
14507 | /* |
14508 | * The software always controls termination by setting TERM_CTL_SEL. |
14509 | * If TERM_CTL_SEL were set to 0, the hardware would set termination. |
14510 | */ |
14511 | asc_dvc->cfg->termination |= TERM_CTL_SEL0x0040; |
14512 | |
14513 | switch(scsi_cfg1 & CABLE_DETECT0x000F) |
14514 | { |
14515 | /* TERM_CTL_H: on, TERM_CTL_L: on */ |
14516 | case 0x3: case 0x7: case 0xB: case 0xD: case 0xE: case 0xF: |
14517 | asc_dvc->cfg->termination |= (TERM_CTL_H0x0020 | TERM_CTL_L0x0010); |
14518 | break; |
14519 | |
14520 | /* TERM_CTL_H: on, TERM_CTL_L: off */ |
14521 | case 0x1: case 0x5: case 0x9: case 0xA: case 0xC: |
14522 | asc_dvc->cfg->termination |= TERM_CTL_H0x0020; |
14523 | break; |
14524 | |
14525 | /* TERM_CTL_H: off, TERM_CTL_L: off */ |
14526 | case 0x2: case 0x6: |
14527 | break; |
14528 | } |
14529 | } |
14530 | |
14531 | /* |
14532 | * Clear any set TERM_CTL_H and TERM_CTL_L bits. |
14533 | */ |
14534 | scsi_cfg1 &= ~TERM_CTL0x0030; |
14535 | |
14536 | /* |
14537 | * Invert the TERM_CTL_H and TERM_CTL_L bits and then |
14538 | * set 'scsi_cfg1'. The TERM_POL bit does not need to be |
14539 | * referenced, because the hardware internally inverts |
14540 | * the Termination High and Low bits if TERM_POL is set. |
14541 | */ |
14542 | scsi_cfg1 |= (TERM_CTL_SEL0x0040 | (~asc_dvc->cfg->termination & TERM_CTL0x0030)); |
14543 | |
14544 | /* |
14545 | * Set SCSI_CFG1 Microcode Default Value |
14546 | * |
14547 | * Set filter value and possibly modified termination control |
14548 | * bits in the Microcode SCSI_CFG1 Register Value. |
14549 | * |
14550 | * The microcode will set the SCSI_CFG1 register using this value |
14551 | * after it is started below. |
14552 | */ |
14553 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1,(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00AE ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( 0x0800 | scsi_cfg1)))) |
14554 | FLTR_11_TO_20NS | scsi_cfg1)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00AE ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( 0x0800 | scsi_cfg1)))); |
14555 | |
14556 | /* |
14557 | * Set SEL_MASK Microcode Default Value |
14558 | * |
14559 | * The microcode will set the SEL_MASK register using this value |
14560 | * after it is started below. |
14561 | */ |
14562 | AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00B2 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( (0x01 << ((asc_dvc->chip_scsi_id) & 15)))))) |
14563 | ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id))(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00B2 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( (0x01 << ((asc_dvc->chip_scsi_id) & 15)))))); |
14564 | |
14565 | /* |
14566 | * Link all the RISC Queue Lists together in a doubly-linked |
14567 | * NULL terminated list. |
14568 | * |
14569 | * Skip the NULL (0) queue which is not used. |
14570 | */ |
14571 | for (i = 1, rql_addr = ASC_MC_RISC_Q_LIST_BASE0x1200 + ASC_MC_RISC_Q_LIST_SIZE0x0008; |
14572 | i < ASC_MC_RISC_Q_TOTAL_CNT0x00FF; |
14573 | i++, rql_addr += ASC_MC_RISC_Q_LIST_SIZE0x0008) |
14574 | { |
14575 | /* |
14576 | * Set the current RISC Queue List's RQL_FWD and RQL_BWD pointers |
14577 | * in a one word write and set the state (RQL_STATE) to free. |
14578 | */ |
14579 | AdvWriteWordLram(iop_base, rql_addr, ((i + 1) + ((i - 1) << 8)))(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((rql_addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( ((i + 1) + ((i - 1) << 8)))))); |
14580 | AdvWriteByteLram(iop_base, rql_addr + RQL_STATE, ASC_MC_QS_FREE)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((rql_addr + 2))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x00)))); |
14581 | } |
14582 | |
14583 | /* |
14584 | * Set the Host and RISC Queue List pointers. |
14585 | * |
14586 | * Both sets of pointers are initialized with the same values: |
14587 | * ASC_MC_RISC_Q_FIRST(0x01) and ASC_MC_RISC_Q_LAST (0xFF). |
14588 | */ |
14589 | AdvWriteByteLram(iop_base, ASC_MC_HOST_NEXT_READY, ASC_MC_RISC_Q_FIRST)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0128 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x0001 )))); |
14590 | AdvWriteByteLram(iop_base, ASC_MC_HOST_NEXT_DONE, ASC_MC_RISC_Q_LAST)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0129 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x00FF )))); |
14591 | |
14592 | AdvWriteByteLram(iop_base, ASC_MC_RISC_NEXT_READY, ASC_MC_RISC_Q_FIRST)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00B4 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x0001 )))); |
14593 | AdvWriteByteLram(iop_base, ASC_MC_RISC_NEXT_DONE, ASC_MC_RISC_Q_LAST)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00B5 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x00FF )))); |
14594 | |
14595 | /* |
14596 | * Finally, set up the last RISC Queue List (255) with |
14597 | * a NULL forward pointer. |
14598 | */ |
14599 | AdvWriteWordLram(iop_base, rql_addr, (ASC_MC_NULL_Q + ((i - 1) << 8)))(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((rql_addr ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( (0x00 + ((i - 1) << 8)))))); |
14600 | AdvWriteByteLram(iop_base, rql_addr + RQL_STATE, ASC_MC_QS_FREE)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((rql_addr + 2))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x00)))); |
14601 | |
14602 | AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,(((*(volatile unsigned char *) ((iop_base) + (0x02))) = (((0x01 | 0x80))))) |
14603 | (ADV_INTR_ENABLE_HOST_INTR | ADV_INTR_ENABLE_GLOBAL_INTR))(((*(volatile unsigned char *) ((iop_base) + (0x02))) = (((0x01 | 0x80))))); |
14604 | |
14605 | /* |
14606 | * Note: Don't remove the use of a temporary variable in |
14607 | * the following code, otherwise the Microsoft C compiler |
14608 | * will turn the following lines into a no-op. |
14609 | */ |
14610 | AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0028))); (word) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0); |
14611 | AdvWriteWordRegister(iop_base, IOPW_PC, word)(((*(volatile unsigned short *) ((iop_base) + (0x2A))) = ((word )))); |
14612 | |
14613 | /* finally, finally, gentlemen, start your engine */ |
14614 | AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN)(((*(volatile unsigned short *) ((iop_base) + (0x0A))) = (((0x4000 ))))); |
14615 | |
14616 | return warn_code; |
14617 | } |
14618 | |
14619 | /* |
14620 | * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and |
14621 | * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while |
14622 | * all of this is done. |
14623 | * |
14624 | * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. |
14625 | * |
14626 | * For a non-fatal error return a warning code. If there are no warnings |
14627 | * then 0 is returned. |
14628 | * |
14629 | * Note: Chip is stopped on entry. |
14630 | */ |
14631 | ASC_INITFUNC(static int AdvInitFromEEP(ADV_DVC_VAR *asc_dvc) |
14632 | STATIC intstatic int AdvInitFromEEP(ADV_DVC_VAR *asc_dvc) |
14633 | AdvInitFromEEP(ADV_DVC_VAR *asc_dvc)static int AdvInitFromEEP(ADV_DVC_VAR *asc_dvc) |
14634 | )static int AdvInitFromEEP(ADV_DVC_VAR *asc_dvc) |
14635 | { |
14636 | AdvPortAddrunsigned long iop_base; |
14637 | ushort warn_code; |
14638 | ADVEEP_CONFIG eep_config; |
14639 | int i; |
14640 | |
14641 | iop_base = asc_dvc->iop_base; |
14642 | |
14643 | warn_code = 0; |
14644 | |
14645 | /* |
14646 | * Read the board's EEPROM configuration. |
14647 | * |
14648 | * Set default values if a bad checksum is found. |
14649 | */ |
14650 | if (AdvGetEEPConfig(iop_base, &eep_config) != eep_config.check_sum) |
14651 | { |
14652 | warn_code |= ASC_WARN_EEPROM_CHKSUM0x0002; |
14653 | |
14654 | /* |
14655 | * Set EEPROM default values. |
14656 | */ |
14657 | for (i = 0; i < sizeof(ADVEEP_CONFIG); i++) |
14658 | { |
14659 | *((uchar *) &eep_config + i) = |
14660 | *((uchar *) &Default_EEPROM_Config + i); |
14661 | } |
14662 | |
14663 | /* |
14664 | * Assume the 6 byte board serial number that was read |
14665 | * from EEPROM is correct even if the EEPROM checksum |
14666 | * failed. |
14667 | */ |
14668 | eep_config.serial_number_word3 = |
14669 | AdvReadEEPWord(iop_base, ASC_EEP_DVC_CFG_END(0x15) - 1); |
14670 | eep_config.serial_number_word2 = |
14671 | AdvReadEEPWord(iop_base, ASC_EEP_DVC_CFG_END(0x15) - 2); |
14672 | eep_config.serial_number_word1 = |
14673 | AdvReadEEPWord(iop_base, ASC_EEP_DVC_CFG_END(0x15) - 3); |
14674 | AdvSetEEPConfig(iop_base, &eep_config); |
14675 | } |
14676 | |
14677 | /* |
14678 | * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the |
14679 | * EEPROM configuration that was read. |
14680 | * |
14681 | * This is the mapping of EEPROM fields to Adv Library fields. |
14682 | */ |
14683 | asc_dvc->wdtr_able = eep_config.wdtr_able; |
14684 | asc_dvc->sdtr_able = eep_config.sdtr_able; |
14685 | asc_dvc->ultra_able = eep_config.ultra_able; |
14686 | asc_dvc->tagqng_able = eep_config.tagqng_able; |
14687 | asc_dvc->cfg->disc_enable = eep_config.disc_enable; |
14688 | asc_dvc->max_host_qng = eep_config.max_host_qng; |
14689 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; |
14690 | asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID15); |
14691 | asc_dvc->start_motor = eep_config.start_motor; |
14692 | asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; |
14693 | asc_dvc->cfg->bios_boot_wait = eep_config.bios_boot_delay; |
14694 | asc_dvc->bios_ctrl = eep_config.bios_ctrl; |
14695 | asc_dvc->no_scam = eep_config.scam_tolerant; |
14696 | asc_dvc->cfg->serial1 = eep_config.serial_number_word1; |
14697 | asc_dvc->cfg->serial2 = eep_config.serial_number_word2; |
14698 | asc_dvc->cfg->serial3 = eep_config.serial_number_word3; |
14699 | |
14700 | /* |
14701 | * Set the host maximum queuing (max. 253, min. 16) and the per device |
14702 | * maximum queuing (max. 63, min. 4). |
14703 | */ |
14704 | if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG0xFD) |
14705 | { |
14706 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG0xFD; |
14707 | } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG0x10) |
14708 | { |
14709 | /* If the value is zero, assume it is uninitialized. */ |
14710 | if (eep_config.max_host_qng == 0) |
14711 | { |
14712 | eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG0xFD; |
14713 | } else |
14714 | { |
14715 | eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG0x10; |
14716 | } |
14717 | } |
14718 | |
14719 | if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG0x3F) |
14720 | { |
14721 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG0x3F; |
14722 | } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG0x04) |
14723 | { |
14724 | /* If the value is zero, assume it is uninitialized. */ |
14725 | if (eep_config.max_dvc_qng == 0) |
14726 | { |
14727 | eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG0x3F; |
14728 | } else |
14729 | { |
14730 | eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG0x04; |
14731 | } |
14732 | } |
14733 | |
14734 | /* |
14735 | * If 'max_dvc_qng' is greater than 'max_host_qng', then |
14736 | * set 'max_dvc_qng' to 'max_host_qng'. |
14737 | */ |
14738 | if (eep_config.max_dvc_qng > eep_config.max_host_qng) |
14739 | { |
14740 | eep_config.max_dvc_qng = eep_config.max_host_qng; |
14741 | } |
14742 | |
14743 | /* |
14744 | * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_CFG 'max_dvc_qng' |
14745 | * values based on possibly adjusted EEPROM values. |
14746 | */ |
14747 | asc_dvc->max_host_qng = eep_config.max_host_qng; |
14748 | asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; |
14749 | |
14750 | |
14751 | /* |
14752 | * If the EEPROM 'termination' field is set to automatic (0), then set |
14753 | * the ADV_DVC_CFG 'termination' field to automatic also. |
14754 | * |
14755 | * If the termination is specified with a non-zero 'termination' |
14756 | * value check that a legal value is set and set the ADV_DVC_CFG |
14757 | * 'termination' field appropriately. |
14758 | */ |
14759 | if (eep_config.termination == 0) |
14760 | { |
14761 | asc_dvc->cfg->termination = 0; /* auto termination */ |
14762 | } else |
14763 | { |
14764 | /* Enable manual control with low off / high off. */ |
14765 | if (eep_config.termination == 1) |
14766 | { |
14767 | asc_dvc->cfg->termination = TERM_CTL_SEL0x0040; |
14768 | |
14769 | /* Enable manual control with low off / high on. */ |
14770 | } else if (eep_config.termination == 2) |
14771 | { |
14772 | asc_dvc->cfg->termination = TERM_CTL_SEL0x0040 | TERM_CTL_H0x0020; |
14773 | |
14774 | /* Enable manual control with low on / high on. */ |
14775 | } else if (eep_config.termination == 3) |
14776 | { |
14777 | asc_dvc->cfg->termination = TERM_CTL_SEL0x0040 | TERM_CTL_H0x0020 | TERM_CTL_L0x0010; |
14778 | } else |
14779 | { |
14780 | /* |
14781 | * The EEPROM 'termination' field contains a bad value. Use |
14782 | * automatic termination instead. |
14783 | */ |
14784 | asc_dvc->cfg->termination = 0; |
14785 | warn_code |= ASC_WARN_EEPROM_TERMINATION0x0004; |
14786 | } |
14787 | } |
14788 | |
14789 | return warn_code; |
14790 | } |
14791 | |
14792 | /* |
14793 | * Read EEPROM configuration into the specified buffer. |
14794 | * |
14795 | * Return a checksum based on the EEPROM configuration read. |
14796 | */ |
14797 | ASC_INITFUNC(static ushort AdvGetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14798 | STATIC ushortstatic ushort AdvGetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14799 | AdvGetEEPConfig(AdvPortAddr iop_base, ADVEEP_CONFIG *cfg_buf)static ushort AdvGetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14800 | )static ushort AdvGetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14801 | { |
14802 | ushort wval, chksum; |
14803 | ushort *wbuf; |
14804 | int eep_addr; |
14805 | |
14806 | wbuf = (ushort *) cfg_buf; |
14807 | chksum = 0; |
14808 | |
14809 | for (eep_addr = ASC_EEP_DVC_CFG_BEGIN(0x00); |
14810 | eep_addr < ASC_EEP_DVC_CFG_END(0x15); |
14811 | eep_addr++, wbuf++) |
14812 | { |
14813 | wval = AdvReadEEPWord(iop_base, eep_addr); |
14814 | chksum += wval; |
14815 | *wbuf = wval; |
14816 | } |
14817 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); |
14818 | wbuf++; |
14819 | for (eep_addr = ASC_EEP_DVC_CTL_BEGIN(0x16); |
14820 | eep_addr < ASC_EEP_MAX_WORD_ADDR(0x1E); |
14821 | eep_addr++, wbuf++) |
14822 | { |
14823 | *wbuf = AdvReadEEPWord(iop_base, eep_addr); |
14824 | } |
14825 | return chksum; |
14826 | } |
14827 | |
14828 | /* |
14829 | * Read the EEPROM from specified location |
14830 | */ |
14831 | ASC_INITFUNC(static ushort AdvReadEEPWord(unsigned long iop_base, int eep_word_addr ) |
14832 | STATIC ushortstatic ushort AdvReadEEPWord(unsigned long iop_base, int eep_word_addr ) |
14833 | AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr)static ushort AdvReadEEPWord(unsigned long iop_base, int eep_word_addr ) |
14834 | )static ushort AdvReadEEPWord(unsigned long iop_base, int eep_word_addr ) |
14835 | { |
14836 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD,(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x80 | eep_word_addr)))) |
14837 | ASC_EEP_CMD_READ | eep_word_addr)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x80 | eep_word_addr)))); |
14838 | AdvWaitEEPCmd(iop_base); |
14839 | return AdvReadWordRegister(iop_base, IOPW_EE_DATA)((*(volatile unsigned short *) ((iop_base) + (0x1C)))); |
14840 | } |
14841 | |
14842 | /* |
14843 | * Wait for EEPROM command to complete |
14844 | */ |
14845 | ASC_INITFUNC(static void AdvWaitEEPCmd(unsigned long iop_base) |
14846 | STATIC voidstatic void AdvWaitEEPCmd(unsigned long iop_base) |
14847 | AdvWaitEEPCmd(AdvPortAddr iop_base)static void AdvWaitEEPCmd(unsigned long iop_base) |
14848 | )static void AdvWaitEEPCmd(unsigned long iop_base) |
14849 | { |
14850 | int eep_delay_ms; |
14851 | |
14852 | for (eep_delay_ms = 0; eep_delay_ms < ASC_EEP_DELAY_MS100; eep_delay_ms++) |
14853 | { |
14854 | if (AdvReadWordRegister(iop_base, IOPW_EE_CMD)((*(volatile unsigned short *) ((iop_base) + (0x1A)))) & ASC_EEP_CMD_DONE0x0200) |
14855 | { |
14856 | break; |
14857 | } |
14858 | DvcSleepMilliSecond(1); |
14859 | } |
14860 | if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD)((*(volatile unsigned short *) ((iop_base) + (0x1A)))) & ASC_EEP_CMD_DONE0x0200) == 0) |
14861 | { |
14862 | ADV_ASSERT(0){ if (!(0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 14862); } }; |
14863 | } |
14864 | return; |
14865 | } |
14866 | |
14867 | /* |
14868 | * Write the EEPROM from 'cfg_buf'. |
14869 | */ |
14870 | ASC_INITFUNC(static void AdvSetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14871 | STATIC voidstatic void AdvSetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14872 | AdvSetEEPConfig(AdvPortAddr iop_base, ADVEEP_CONFIG *cfg_buf)static void AdvSetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14873 | )static void AdvSetEEPConfig(unsigned long iop_base, ADVEEP_CONFIG *cfg_buf) |
14874 | { |
14875 | ushort *wbuf; |
14876 | ushort addr, chksum; |
14877 | |
14878 | wbuf = (ushort *) cfg_buf; |
14879 | chksum = 0; |
14880 | |
14881 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x30 )))); |
14882 | AdvWaitEEPCmd(iop_base); |
14883 | |
14884 | /* |
14885 | * Write EEPROM from word 0 to word 15 |
14886 | */ |
14887 | for (addr = ASC_EEP_DVC_CFG_BEGIN(0x00); |
14888 | addr < ASC_EEP_DVC_CFG_END(0x15); addr++, wbuf++) |
14889 | { |
14890 | chksum += *wbuf; |
14891 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, *wbuf)(((*(volatile unsigned short *) ((iop_base) + (0x1C))) = ((*wbuf )))); |
14892 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x40 | addr)))); |
14893 | AdvWaitEEPCmd(iop_base); |
14894 | DvcSleepMilliSecond(ASC_EEP_DELAY_MS100); |
14895 | } |
14896 | |
14897 | /* |
14898 | * Write EEPROM checksum at word 18 |
14899 | */ |
14900 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum)(((*(volatile unsigned short *) ((iop_base) + (0x1C))) = ((chksum )))); |
14901 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x40 | addr)))); |
14902 | AdvWaitEEPCmd(iop_base); |
14903 | wbuf++; /* skip over check_sum */ |
14904 | |
14905 | /* |
14906 | * Write EEPROM OEM name at words 19 to 26 |
14907 | */ |
14908 | for (addr = ASC_EEP_DVC_CTL_BEGIN(0x16); |
14909 | addr < ASC_EEP_MAX_WORD_ADDR(0x1E); addr++, wbuf++) |
14910 | { |
14911 | AdvWriteWordRegister(iop_base, IOPW_EE_DATA, *wbuf)(((*(volatile unsigned short *) ((iop_base) + (0x1C))) = ((*wbuf )))); |
14912 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x40 | addr)))); |
14913 | AdvWaitEEPCmd(iop_base); |
14914 | } |
14915 | AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE)(((*(volatile unsigned short *) ((iop_base) + (0x1A))) = ((0x00 )))); |
14916 | AdvWaitEEPCmd(iop_base); |
14917 | return; |
14918 | } |
14919 | |
14920 | /* |
14921 | * This function resets the chip and SCSI bus |
14922 | * |
14923 | * It is up to the caller to add a delay to let the bus settle after |
14924 | * calling this function. |
14925 | * |
14926 | * The SCSI_CFG0, SCSI_CFG1, and MEM_CFG registers are set-up in |
14927 | * AdvInitAsc3550Driver(). Here when doing a write to one of these |
14928 | * registers read first and then write. |
14929 | * |
14930 | * Note: A SCSI Bus Reset can not be done until after the EEPROM |
14931 | * configuration is read to determine whether SCSI Bus Resets |
14932 | * should be performed. |
14933 | */ |
14934 | ASC_INITFUNC(static void AdvResetChip(ADV_DVC_VAR *asc_dvc) |
14935 | STATIC voidstatic void AdvResetChip(ADV_DVC_VAR *asc_dvc) |
14936 | AdvResetChip(ADV_DVC_VAR *asc_dvc)static void AdvResetChip(ADV_DVC_VAR *asc_dvc) |
14937 | )static void AdvResetChip(ADV_DVC_VAR *asc_dvc) |
14938 | { |
14939 | AdvPortAddrunsigned long iop_base; |
14940 | ushort word; |
14941 | uchar byte; |
14942 | |
14943 | iop_base = asc_dvc->iop_base; |
14944 | |
14945 | /* |
14946 | * Reset Chip. |
14947 | */ |
14948 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET)(((*(volatile unsigned short *) ((iop_base) + (0x02))) = ((0x00C6 )))); |
14949 | DvcSleepMilliSecond(100); |
14950 | AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_WR_IO_REG)(((*(volatile unsigned short *) ((iop_base) + (0x02))) = ((0x00C5 )))); |
14951 | |
14952 | /* |
14953 | * Initialize Chip registers. |
14954 | * |
14955 | * Note: Don't remove the use of a temporary variable in the following |
14956 | * code, otherwise the Microsoft C compiler will turn the following lines |
14957 | * into a no-op. |
14958 | */ |
14959 | byte = AdvReadByteRegister(iop_base, IOPB_MEM_CFG)((*(volatile unsigned char *) ((iop_base) + (0x10)))); |
14960 | byte |= RAM_SZ_8KB0x08; |
14961 | AdvWriteByteRegister(iop_base, IOPB_MEM_CFG, byte)(((*(volatile unsigned char *) ((iop_base) + (0x10))) = ((byte )))); |
14962 | |
14963 | word = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1)((*(volatile unsigned short *) ((iop_base) + (0x0E)))); |
14964 | word &= ~BIG_ENDIAN0x8000; |
14965 | AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, word)(((*(volatile unsigned short *) ((iop_base) + (0x0E))) = ((word )))); |
14966 | |
14967 | /* |
14968 | * Setting the START_CTL_EMFU 3:2 bits sets a FIFO threshold |
14969 | * of 128 bytes. This register is only accessible to the host. |
14970 | */ |
14971 | AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,(((*(volatile unsigned char *) ((iop_base) + (0x20))) = ((0x0C | 0x03)))) |
14972 | START_CTL_EMFU | READ_CMD_MRM)(((*(volatile unsigned char *) ((iop_base) + (0x20))) = ((0x0C | 0x03)))); |
14973 | } |
14974 | |
14975 | /* a_advlib.c */ |
14976 | /* |
14977 | * Description: |
14978 | * Send a SCSI request to the ASC3550 chip |
14979 | * |
14980 | * If there is no SG list for the request, set 'sg_entry_cnt' to 0. |
14981 | * |
14982 | * If 'sg_real_addr' is non-zero on entry, AscGetSGList() will not be |
14983 | * called. It is assumed the caller has already initialized 'sg_real_addr'. |
14984 | * |
14985 | * Return: |
14986 | * ADV_SUCCESS(1) - the request is in the mailbox |
14987 | * ADV_BUSY(0) - total request count > 253, try later |
14988 | * ADV_ERROR(-1) - invalid scsi request Q |
14989 | */ |
14990 | STATICstatic int |
14991 | AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, |
14992 | ADV_SCSI_REQ_Q *scsiq) |
14993 | { |
14994 | if (scsiq == (ADV_SCSI_REQ_Q *) 0L) |
14995 | { |
14996 | /* 'scsiq' should never be NULL. */ |
14997 | ADV_ASSERT(0){ if (!(0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 14997); } }; |
14998 | return ADV_ERROR(-1); |
14999 | } |
15000 | |
15001 | return AdvSendScsiCmd(asc_dvc, scsiq); |
15002 | } |
15003 | |
15004 | /* |
15005 | * Reset SCSI Bus and purge all outstanding requests. |
15006 | * |
15007 | * Return Value: |
15008 | * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset. |
15009 | * |
15010 | * Note: Should always return ADV_TRUE. |
15011 | */ |
15012 | STATICstatic int |
15013 | AdvResetSB(ADV_DVC_VAR *asc_dvc) |
15014 | { |
15015 | int status; |
15016 | |
15017 | status = AdvSendIdleCmd(asc_dvc, (ushort) IDLE_CMD_SCSI_RESET0x0020, 0L, 0); |
15018 | |
15019 | AdvResetSCSIBus(asc_dvc); |
15020 | |
15021 | return status; |
15022 | } |
15023 | |
15024 | /* |
15025 | * Reset SCSI Bus and delay. |
15026 | */ |
15027 | STATICstatic void |
15028 | AdvResetSCSIBus(ADV_DVC_VAR *asc_dvc) |
15029 | { |
15030 | AdvPortAddrunsigned long iop_base; |
15031 | ushort scsi_ctrl; |
15032 | |
15033 | iop_base = asc_dvc->iop_base; |
15034 | |
15035 | /* |
15036 | * The microcode currently sets the SCSI Bus Reset signal while |
15037 | * handling the AscSendIdleCmd() IDLE_CMD_SCSI_RESET command above. |
15038 | * But the SCSI Bus Reset Hold Time in the microcode is not deterministic |
15039 | * (it may in fact be for less than the SCSI Spec. minimum of 25 us). |
15040 | * Therefore on return the Adv Library sets the SCSI Bus Reset signal |
15041 | * for ASC_SCSI_RESET_HOLD_TIME_US, which is defined to be greater |
15042 | * than 25 us. |
15043 | */ |
15044 | scsi_ctrl = AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL)((*(volatile unsigned short *) ((iop_base) + (0x34)))); |
15045 | AdvWriteWordRegister(iop_base, IOPW_SCSI_CTRL,(((*(volatile unsigned short *) ((iop_base) + (0x34))) = ((scsi_ctrl | 0x2000)))) |
15046 | scsi_ctrl | ADV_SCSI_CTRL_RSTOUT)(((*(volatile unsigned short *) ((iop_base) + (0x34))) = ((scsi_ctrl | 0x2000)))); |
15047 | DvcDelayMicroSecond(asc_dvc, (ushort) ASC_SCSI_RESET_HOLD_TIME_US60); |
15048 | AdvWriteWordRegister(iop_base, IOPW_SCSI_CTRL,(((*(volatile unsigned short *) ((iop_base) + (0x34))) = ((scsi_ctrl & ~0x2000)))) |
15049 | scsi_ctrl & ~ADV_SCSI_CTRL_RSTOUT)(((*(volatile unsigned short *) ((iop_base) + (0x34))) = ((scsi_ctrl & ~0x2000)))); |
15050 | |
15051 | DvcSleepMilliSecond((ulong) asc_dvc->scsi_reset_wait * 1000); |
15052 | } |
15053 | |
15054 | |
15055 | /* |
15056 | * Adv Library Interrupt Service Routine |
15057 | * |
15058 | * This function is called by a driver's interrupt service routine. |
15059 | * The function disables and re-enables interrupts. |
15060 | * |
15061 | * When a microcode idle command is completed, the ADV_DVC_VAR |
15062 | * 'idle_cmd_done' field is set to ADV_TRUE. |
15063 | * |
15064 | * Note: AdvISR() can be called when interrupts are disabled or even |
15065 | * when there is no hardware interrupt condition present. It will |
15066 | * always check for completed idle commands and microcode requests. |
15067 | * This is an important feature that shouldn't be changed because it |
15068 | * allows commands to be completed from polling mode loops. |
15069 | * |
15070 | * Return: |
15071 | * ADV_TRUE(1) - interrupt was pending |
15072 | * ADV_FALSE(0) - no interrupt was pending |
15073 | */ |
15074 | STATICstatic int |
15075 | AdvISR(ADV_DVC_VAR *asc_dvc) |
15076 | { |
15077 | AdvPortAddrunsigned long iop_base; |
15078 | uchar int_stat; |
15079 | ushort next_done_loc, target_bit; |
15080 | int completed_q; |
15081 | long flags; |
15082 | ADV_SCSI_REQ_Q *scsiq; |
15083 | ASC_REQ_SENSE *sense_data; |
15084 | int ret; |
15085 | |
15086 | flags = DvcEnterCritical(); |
15087 | iop_base = asc_dvc->iop_base; |
15088 | |
15089 | if (AdvIsIntPending(iop_base)(((*(volatile unsigned short *) ((iop_base) + (0x02)))) & 0x0100)) |
15090 | { |
15091 | ret = ADV_TRUE1; |
15092 | } else |
15093 | { |
15094 | ret = ADV_FALSE0; |
15095 | } |
15096 | |
15097 | /* Reading the register clears the interrupt. */ |
15098 | int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG)((*(volatile unsigned char *) ((iop_base) + (0x00)))); |
15099 | |
15100 | if (int_stat & ADV_INTR_STATUS_INTRB0x02) |
15101 | { |
15102 | asc_dvc->idle_cmd_done = ADV_TRUE1; |
15103 | } |
15104 | |
15105 | /* |
15106 | * Notify the driver of a hardware detected SCSI Bus Reset. |
15107 | */ |
15108 | if (int_stat & ADV_INTR_STATUS_INTRC0x04) |
15109 | { |
15110 | if (asc_dvc->sbreset_callback != 0) |
15111 | { |
15112 | (*(ADV_SBRESET_CALLBACK) asc_dvc->sbreset_callback)(asc_dvc); |
15113 | } |
15114 | } |
15115 | |
15116 | /* |
15117 | * ASC_MC_HOST_NEXT_DONE (0x129) is actually the last completed RISC |
15118 | * Queue List request. Its forward pointer (RQL_FWD) points to the |
15119 | * current completed RISC Queue List request. |
15120 | */ |
15121 | AdvReadByteLram(iop_base, ASC_MC_HOST_NEXT_DONE, next_done_loc)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0129))); (next_done_loc) = (*(volatile unsigned char *) ((iop_base ) + 0x06)); } while (0); |
15122 | next_done_loc = ASC_MC_RISC_Q_LIST_BASE0x1200 + |
15123 | (next_done_loc * ASC_MC_RISC_Q_LIST_SIZE0x0008) + RQL_FWD0; |
15124 | |
15125 | AdvReadByteLram(iop_base, next_done_loc, completed_q)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( next_done_loc))); (completed_q) = (*(volatile unsigned char * ) ((iop_base) + 0x06)); } while (0); |
15126 | |
15127 | /* Loop until all completed Q's are processed. */ |
15128 | while (completed_q != ASC_MC_NULL_Q0x00) |
15129 | { |
15130 | AdvWriteByteLram(iop_base, ASC_MC_HOST_NEXT_DONE, completed_q)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0129 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((completed_q )))); |
15131 | |
15132 | next_done_loc = ASC_MC_RISC_Q_LIST_BASE0x1200 + |
15133 | (completed_q * ASC_MC_RISC_Q_LIST_SIZE0x0008); |
15134 | |
15135 | /* |
15136 | * Read the ADV_SCSI_REQ_Q virtual address pointer from |
15137 | * the RISC list entry. The microcode has changed the |
15138 | * ADV_SCSI_REQ_Q physical address to its virtual address. |
15139 | * |
15140 | * Refer to comments at the end of AdvSendScsiCmd() for |
15141 | * more information on the RISC list structure. |
15142 | */ |
15143 | { |
15144 | ushort lsw, msw; |
15145 | AdvReadWordLram(iop_base, next_done_loc + RQL_PHYADDR, lsw)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( next_done_loc + 4))); (lsw) = (*(volatile unsigned short *) ( (iop_base) + 0x06)); } while (0); |
15146 | AdvReadWordLram(iop_base, next_done_loc + RQL_PHYADDR + 2, msw)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( next_done_loc + 4 + 2))); (msw) = (*(volatile unsigned short * ) ((iop_base) + 0x06)); } while (0); |
15147 | |
15148 | scsiq = (ADV_SCSI_REQ_Q *) (((ulong) msw << 16) | lsw); |
15149 | } |
15150 | ADV_ASSERT(scsiq != NULL){ if (!(scsiq != ((void *) 0))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 15150); } }; |
15151 | |
15152 | target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id)(0x01 << ((scsiq->target_id) & 15)); |
15153 | |
15154 | /* |
15155 | * Clear request microcode control flag. |
15156 | */ |
15157 | scsiq->cntl = 0; |
15158 | |
15159 | /* |
15160 | * Check Condition handling |
15161 | */ |
15162 | if ((scsiq->done_status == QD_WITH_ERROR0x04) && |
15163 | (scsiq->scsi_status == SS_CHK_CONDITION0x02) && |
15164 | (sense_data = (ASC_REQ_SENSE *) scsiq->vsense_addr) != 0 && |
15165 | (scsiq->orig_sense_len - scsiq->sense_len) >= ASC_MIN_SENSE_LEN14) |
15166 | { |
15167 | /* |
15168 | * Command returned with a check condition and valid |
15169 | * sense data. |
15170 | */ |
15171 | } |
15172 | /* |
15173 | * If the command that completed was a SCSI INQUIRY and |
15174 | * LUN 0 was sent the command, then process the INQUIRY |
15175 | * command information for the device. |
15176 | */ |
15177 | else if (scsiq->done_status == QD_NO_ERROR0x01 && |
15178 | scsiq->cdb[0] == SCSICMD_Inquiry0x12 && |
15179 | scsiq->target_lun == 0) |
15180 | { |
15181 | AdvInquiryHandling(asc_dvc, scsiq); |
15182 | } |
15183 | |
15184 | |
15185 | /* Change the RISC Queue List state to free. */ |
15186 | AdvWriteByteLram(iop_base, next_done_loc + RQL_STATE, ASC_MC_QS_FREE)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((next_done_loc + 2))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x00)))); |
15187 | |
15188 | /* Get the RISC Queue List forward pointer. */ |
15189 | AdvReadByteLram(iop_base, next_done_loc + RQL_FWD, completed_q)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( next_done_loc + 0))); (completed_q) = (*(volatile unsigned char *) ((iop_base) + 0x06)); } while (0); |
15190 | |
15191 | /* |
15192 | * Notify the driver of the completed request by passing |
15193 | * the ADV_SCSI_REQ_Q pointer to its callback function. |
15194 | */ |
15195 | ADV_ASSERT(asc_dvc->cur_host_qng > 0){ if (!(asc_dvc->cur_host_qng > 0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 15195); } }; |
15196 | asc_dvc->cur_host_qng--; |
15197 | scsiq->a_flag |= ADV_SCSIQ_DONE0x02; |
15198 | (*(ADV_ISR_CALLBACK) asc_dvc->isr_callback)(asc_dvc, scsiq); |
15199 | /* |
15200 | * Note: After the driver callback function is called, 'scsiq' |
15201 | * can no longer be referenced. |
15202 | * |
15203 | * Fall through and continue processing other completed |
15204 | * requests... |
15205 | */ |
15206 | |
15207 | /* |
15208 | * Disable interrupts again in case the driver inadvertently |
15209 | * enabled interrupts in its callback function. |
15210 | * |
15211 | * The DvcEnterCritical() return value is ignored, because |
15212 | * the 'flags' saved when AdvISR() was first entered will be |
15213 | * used to restore the interrupt flag on exit. |
15214 | */ |
15215 | (void) DvcEnterCritical(); |
15216 | } |
15217 | DvcLeaveCritical(flags); |
15218 | return ret; |
15219 | } |
15220 | |
15221 | /* |
15222 | * Send an idle command to the chip and wait for completion. |
15223 | * |
15224 | * Interrupts do not have to be enabled on entry. |
15225 | * |
15226 | * Return Values: |
15227 | * ADV_TRUE - command completed successfully |
15228 | * ADV_FALSE - command failed |
15229 | */ |
15230 | STATICstatic int |
15231 | AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, |
15232 | ushort idle_cmd, |
15233 | ulong idle_cmd_parameter, |
15234 | int flags) |
15235 | { |
15236 | int last_int_level; |
15237 | ulong i; |
15238 | AdvPortAddrunsigned long iop_base; |
15239 | int ret; |
15240 | |
15241 | asc_dvc->idle_cmd_done = 0; |
15242 | |
15243 | last_int_level = DvcEnterCritical(); |
15244 | iop_base = asc_dvc->iop_base; |
15245 | |
15246 | /* |
15247 | * Write the idle command value after the idle command parameter |
15248 | * has been written to avoid a race condition. If the order is not |
15249 | * followed, the microcode may process the idle command before the |
15250 | * parameters have been written to LRAM. |
15251 | */ |
15252 | AdvWriteDWordLram(iop_base, ASC_MC_IDLE_PARA_STAT, idle_cmd_parameter)((((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00A8 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( ushort) ((idle_cmd_parameter) & 0xFFFF)))), (((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00A8) + 2)), (( *(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort) ((idle_cmd_parameter >> 16) & 0xFFFF))))); |
15253 | AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00A6 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( idle_cmd)))); |
15254 | DvcLeaveCritical(last_int_level); |
15255 | |
15256 | /* |
15257 | * If the 'flags' argument contains the ADV_NOWAIT flag, then |
15258 | * return with success. |
15259 | */ |
15260 | if (flags & ADV_NOWAIT0x01) |
15261 | { |
15262 | return ADV_TRUE1; |
15263 | } |
15264 | |
15265 | for (i = 0; i < SCSI_WAIT_10_SEC10 * SCSI_MS_PER_SEC1000; i++) |
15266 | { |
15267 | /* |
15268 | * 'idle_cmd_done' is set by AdvISR(). |
15269 | */ |
15270 | if (asc_dvc->idle_cmd_done) |
15271 | { |
15272 | break; |
15273 | } |
15274 | DvcSleepMilliSecond(1); |
15275 | |
15276 | /* |
15277 | * If interrupts were disabled on entry to AdvSendIdleCmd(), |
15278 | * then they will still be disabled here. Call AdvISR() to |
15279 | * check for the idle command completion. |
15280 | */ |
15281 | (void) AdvISR(asc_dvc); |
15282 | } |
15283 | |
15284 | last_int_level = DvcEnterCritical(); |
15285 | |
15286 | if (asc_dvc->idle_cmd_done == ADV_FALSE0) |
15287 | { |
15288 | ADV_ASSERT(0){ if (!(0)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 15288); } }; /* The idle command should never timeout. */ |
15289 | return ADV_FALSE0; |
15290 | } else |
15291 | { |
15292 | AdvReadWordLram(iop_base, ASC_MC_IDLE_PARA_STAT, ret)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00A8))); (ret) = (*(volatile unsigned short *) ((iop_base) + 0x06)); } while (0); |
15293 | return ret; |
15294 | } |
15295 | } |
15296 | |
15297 | /* |
15298 | * Send the SCSI request block to the adapter |
15299 | * |
15300 | * Each of the 255 Adv Library/Microcode RISC Lists or mailboxes has the |
15301 | * following structure: |
15302 | * |
15303 | * 0: RQL_FWD - RISC list forward pointer (1 byte) |
15304 | * 1: RQL_BWD - RISC list backward pointer (1 byte) |
15305 | * 2: RQL_STATE - RISC list state byte - free, ready, done, aborted (1 byte) |
15306 | * 3: RQL_TID - request target id (1 byte) |
15307 | * 4: RQL_PHYADDR - ADV_SCSI_REQ_Q physical pointer (4 bytes) |
15308 | * |
15309 | * Return: |
15310 | * ADV_SUCCESS(1) - the request is in the mailbox |
15311 | * ADV_BUSY(0) - total request count > 253, try later |
15312 | */ |
15313 | STATICstatic int |
15314 | AdvSendScsiCmd( |
15315 | ADV_DVC_VAR *asc_dvc, |
15316 | ADV_SCSI_REQ_Q *scsiq) |
15317 | { |
15318 | ushort next_ready_loc; |
15319 | uchar next_ready_loc_fwd; |
15320 | int last_int_level; |
15321 | AdvPortAddrunsigned long iop_base; |
15322 | long req_size; |
15323 | ulong q_phy_addr; |
15324 | |
15325 | /* |
15326 | * The ADV_SCSI_REQ_Q 'target_id' field should never be equal |
15327 | * to the host adapter ID or exceed ADV_MAX_TID. |
15328 | */ |
15329 | if (scsiq->target_id == asc_dvc->chip_scsi_id || |
15330 | scsiq->target_id > ADV_MAX_TID15) |
15331 | { |
15332 | scsiq->host_status = QHSTA_M_INVALID_DEVICE0x45; |
15333 | scsiq->done_status = QD_WITH_ERROR0x04; |
15334 | return ADV_ERROR(-1); |
15335 | } |
15336 | |
15337 | iop_base = asc_dvc->iop_base; |
15338 | |
15339 | last_int_level = DvcEnterCritical(); |
15340 | |
15341 | if (asc_dvc->cur_host_qng >= asc_dvc->max_host_qng) |
15342 | { |
15343 | DvcLeaveCritical(last_int_level); |
15344 | return ADV_BUSY0; |
15345 | } else |
15346 | { |
15347 | ADV_ASSERT(asc_dvc->cur_host_qng < ASC_MC_RISC_Q_TOTAL_CNT){ if (!(asc_dvc->cur_host_qng < 0x00FF)) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 15347); } }; |
15348 | asc_dvc->cur_host_qng++; |
15349 | } |
15350 | |
15351 | /* |
15352 | * Clear the ADV_SCSI_REQ_Q done flag. |
15353 | */ |
15354 | scsiq->a_flag &= ~ADV_SCSIQ_DONE0x02; |
15355 | |
15356 | /* |
15357 | * Save the original sense buffer length. |
15358 | * |
15359 | * After the request completes 'sense_len' will be set to the residual |
15360 | * byte count of the Auto-Request Sense if a command returns CHECK |
15361 | * CONDITION and the Sense Data is valid indicated by 'host_status' not |
15362 | * being set to QHSTA_M_AUTO_REQ_SENSE_FAIL. To determine the valid |
15363 | * Sense Data Length subtract 'sense_len' from 'orig_sense_len'. |
15364 | */ |
15365 | scsiq->orig_sense_len = scsiq->sense_len; |
15366 | |
15367 | AdvReadByteLram(iop_base, ASC_MC_HOST_NEXT_READY, next_ready_loc)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0128))); (next_ready_loc) = (*(volatile unsigned char *) (( iop_base) + 0x06)); } while (0); |
15368 | next_ready_loc = ASC_MC_RISC_Q_LIST_BASE0x1200 + |
15369 | (next_ready_loc * ASC_MC_RISC_Q_LIST_SIZE0x0008); |
15370 | |
15371 | /* |
15372 | * Write the physical address of the Q to the mailbox. |
15373 | * We need to skip the first four bytes, because the microcode |
15374 | * uses them internally for linking Q's together. |
15375 | */ |
15376 | req_size = sizeof(ADV_SCSI_REQ_Q); |
15377 | q_phy_addr = DvcGetPhyAddr(asc_dvc, scsiq, |
15378 | (uchar *) scsiq, &req_size, |
15379 | ADV_IS_SCSIQ_FLAG0x01); |
15380 | ADV_ASSERT(ADV_DWALIGN(q_phy_addr) == q_phy_addr){ if (!((((ulong) (q_phy_addr) + 0x3) & ~0x3) == q_phy_addr )) { printk("ASC_ASSERT() Failure: file %s, line %d\n", "../linux/src/drivers/scsi/advansys.c" , 15380); } }; |
15381 | ADV_ASSERT(req_size >= sizeof(ADV_SCSI_REQ_Q)){ if (!(req_size >= sizeof(ADV_SCSI_REQ_Q))) { printk("ASC_ASSERT() Failure: file %s, line %d\n" , "../linux/src/drivers/scsi/advansys.c", 15381); } }; |
15382 | |
15383 | scsiq->scsiq_ptr = (ADV_SCSI_REQ_Q *) scsiq; |
15384 | |
15385 | /* |
15386 | * The RISC list structure, which 'next_ready_loc' is a pointer |
15387 | * to in microcode LRAM, has the format detailed in the comment |
15388 | * header for this function. |
15389 | * |
15390 | * Write the ADV_SCSI_REQ_Q physical pointer to 'next_ready_loc' request. |
15391 | */ |
15392 | AdvWriteDWordLram(iop_base, next_ready_loc + RQL_PHYADDR, q_phy_addr)((((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((next_ready_loc + 4))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort) ((q_phy_addr) & 0xFFFF)))), (((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((next_ready_loc + 4) + 2)), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = ((ushort ) ((q_phy_addr >> 16) & 0xFFFF))))); |
15393 | |
15394 | /* Write target_id to 'next_ready_loc' request. */ |
15395 | AdvWriteByteLram(iop_base, next_ready_loc + RQL_TID, scsiq->target_id)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((next_ready_loc + 3))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((scsiq->target_id)))); |
15396 | |
15397 | /* |
15398 | * Set the ASC_MC_HOST_NEXT_READY (0x128) microcode variable to |
15399 | * the 'next_ready_loc' request forward pointer. |
15400 | * |
15401 | * Do this *before* changing the 'next_ready_loc' queue to QS_READY. |
15402 | * After the state is changed to QS_READY 'RQL_FWD' will be changed |
15403 | * by the microcode. |
15404 | * |
15405 | * NOTE: The temporary variable 'next_ready_loc_fwd' is required to |
15406 | * prevent some compilers from optimizing out 'AdvReadByteLram()' if |
15407 | * it were used as the 3rd argument to 'AdvWriteByteLram()'. |
15408 | */ |
15409 | AdvReadByteLram(iop_base, next_ready_loc + RQL_FWD, next_ready_loc_fwd)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( next_ready_loc + 0))); (next_ready_loc_fwd) = (*(volatile unsigned char *) ((iop_base) + 0x06)); } while (0); |
15410 | AdvWriteByteLram(iop_base, ASC_MC_HOST_NEXT_READY, next_ready_loc_fwd)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0128 ))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((next_ready_loc_fwd )))); |
15411 | |
15412 | /* |
15413 | * Change the state of 'next_ready_loc' request from QS_FREE to |
15414 | * QS_READY which will cause the microcode to pick it up and |
15415 | * execute it. |
15416 | * |
15417 | * Can't reference 'next_ready_loc' after changing the request |
15418 | * state to QS_READY. The microcode now owns the request. |
15419 | */ |
15420 | AdvWriteByteLram(iop_base, next_ready_loc + RQL_STATE, ASC_MC_QS_READY)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((next_ready_loc + 2))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((0x01)))); |
15421 | |
15422 | DvcLeaveCritical(last_int_level); |
15423 | return ADV_SUCCESS1; |
15424 | } |
15425 | |
15426 | /* |
15427 | * Inquiry Information Byte 7 Handling |
15428 | * |
15429 | * Handle SCSI Inquiry Command information for a device by setting |
15430 | * microcode operating variables that affect WDTR, SDTR, and Tag |
15431 | * Queuing. |
15432 | */ |
15433 | STATICstatic void |
15434 | AdvInquiryHandling( |
15435 | ADV_DVC_VAR *asc_dvc, |
15436 | ADV_SCSI_REQ_Q *scsiq) |
15437 | { |
15438 | AdvPortAddrunsigned long iop_base; |
15439 | uchar tid; |
15440 | ASC_SCSI_INQUIRY *inq; |
15441 | ushort tidmask; |
15442 | ushort cfg_word; |
15443 | |
15444 | /* |
15445 | * AdvInquiryHandling() requires up to INQUIRY information Byte 7 |
15446 | * to be available. |
15447 | * |
15448 | * If less than 8 bytes of INQUIRY information were requested or less |
15449 | * than 8 bytes were transferred, then return. cdb[4] is the request |
15450 | * length and the ADV_SCSI_REQ_Q 'data_cnt' field is set by the |
15451 | * microcode to the transfer residual count. |
15452 | */ |
15453 | if (scsiq->cdb[4] < 8 || (scsiq->cdb[4] - scsiq->data_cnt) < 8) |
15454 | { |
15455 | return; |
15456 | } |
15457 | |
15458 | iop_base = asc_dvc->iop_base; |
15459 | tid = scsiq->target_id; |
15460 | inq = (ASC_SCSI_INQUIRY *) scsiq->vdata_addr; |
15461 | |
15462 | /* |
15463 | * WDTR, SDTR, and Tag Queuing cannot be enabled for old devices. |
15464 | */ |
15465 | if (inq->byte3.rsp_data_fmt < 2 && inq->byte2.ansi_apr_ver < 2) |
15466 | { |
15467 | return; |
15468 | } else |
15469 | { |
15470 | /* |
15471 | * INQUIRY Byte 7 Handling |
15472 | * |
15473 | * Use a device's INQUIRY byte 7 to determine whether it |
15474 | * supports WDTR, SDTR, and Tag Queuing. If the feature |
15475 | * is enabled in the EEPROM and the device supports the |
15476 | * feature, then enable it in the microcode. |
15477 | */ |
15478 | |
15479 | tidmask = ADV_TID_TO_TIDMASK(tid)(0x01 << ((tid) & 15)); |
15480 | |
15481 | /* |
15482 | * Wide Transfers |
15483 | * |
15484 | * If the EEPROM enabled WDTR for the device and the device |
15485 | * supports wide bus (16 bit) transfers, then turn on the |
15486 | * device's 'wdtr_able' bit and write the new value to the |
15487 | * microcode. |
15488 | */ |
15489 | if ((asc_dvc->wdtr_able & tidmask) && inq->byte7.WBus16) |
15490 | { |
15491 | AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0120))); (cfg_word) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
15492 | if ((cfg_word & tidmask) == 0) |
15493 | { |
15494 | cfg_word |= tidmask; |
15495 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0120 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( cfg_word)))); |
15496 | |
15497 | /* |
15498 | * Clear the microcode "WDTR negotiation" done indicator |
15499 | * for the target to cause it to negotiate with the new |
15500 | * setting set above. |
15501 | */ |
15502 | AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x0124))); (cfg_word) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
15503 | cfg_word &= ~tidmask; |
15504 | AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x0124 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( cfg_word)))); |
15505 | } |
15506 | } |
15507 | |
15508 | /* |
15509 | * Synchronous Transfers |
15510 | * |
15511 | * If the EEPROM enabled SDTR for the device and the device |
15512 | * supports synchronous transfers, then turn on the device's |
15513 | * 'sdtr_able' bit. Write the new value to the microcode. |
15514 | */ |
15515 | if ((asc_dvc->sdtr_able & tidmask) && inq->byte7.Sync) |
15516 | { |
15517 | AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x009E))); (cfg_word) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
15518 | if ((cfg_word & tidmask) == 0) |
15519 | { |
15520 | cfg_word |= tidmask; |
15521 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x009E ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( cfg_word)))); |
15522 | |
15523 | /* |
15524 | * Clear the microcode "SDTR negotiation" done indicator |
15525 | * for the target to cause it to negotiate with the new |
15526 | * setting set above. |
15527 | */ |
15528 | AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00B6))); (cfg_word) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
15529 | cfg_word &= ~tidmask; |
15530 | AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00B6 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( cfg_word)))); |
15531 | } |
15532 | } |
15533 | |
15534 | /* |
15535 | * If the EEPROM enabled Tag Queuing for device and the |
15536 | * device supports Tag Queuing, then turn on the device's |
15537 | * 'tagqng_enable' bit in the microcode and set the microcode |
15538 | * maximum command count to the ADV_DVC_VAR 'max_dvc_qng' |
15539 | * value. |
15540 | * |
15541 | * Tag Queuing is disabled for the BIOS which runs in polled |
15542 | * mode and would see no benefit from Tag Queuing. Also by |
15543 | * disabling Tag Queuing in the BIOS devices with Tag Queuing |
15544 | * bugs will at least work with the BIOS. |
15545 | */ |
15546 | if ((asc_dvc->tagqng_able & tidmask) && inq->byte7.CmdQue) |
15547 | { |
15548 | AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word)do { ((*(volatile unsigned short *) ((iop_base) + 0x04)) = (( 0x00A0))); (cfg_word) = (*(volatile unsigned short *) ((iop_base ) + 0x06)); } while (0); |
15549 | cfg_word |= tidmask; |
15550 | AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00A0 ))), ((*(volatile unsigned short *) ((iop_base) + 0x06)) = (( cfg_word)))); |
15551 | AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00D0 + tid))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((asc_dvc->max_dvc_qng)))) |
15552 | asc_dvc->max_dvc_qng)(((*(volatile unsigned short *) ((iop_base) + 0x04)) = ((0x00D0 + tid))), ((*(volatile unsigned char *) ((iop_base) + 0x06)) = ((asc_dvc->max_dvc_qng)))); |
15553 | } |
15554 | } |
15555 | } |