../linux/src/drivers/scsi/sym53c8xx.c

Bug Summary

File:	obj-scan-build/../linux/src/drivers/scsi/sym53c8xx.c
Location:	line 13056, column 2
Description:	Value stored to 'vendor_id' is never read

Annotated Source Code

1	/******************************************************************************
2	** High Performance device driver for the Symbios 53C896 controller.
3	**
4	** Copyright (C) 1998-2000 Gerard Roudier <groudier@club-internet.fr>
5	**
6	** This driver also supports all the Symbios 53C8XX controller family,
7	** except 53C810 revisions < 16, 53C825 revisions < 16 and all
8	** revisions of 53C815 controllers.
9	**
10	** This driver is based on the Linux port of the FreeBSD ncr driver.
11	**
12	** Copyright (C) 1994 Wolfgang Stanglmeier
13	**
14	**-----------------------------------------------------------------------------
15	**
16	** This program is free software; you can redistribute it and/or modify
17	** it under the terms of the GNU General Public License as published by
18	** the Free Software Foundation; either version 2 of the License, or
19	** (at your option) any later version.
20	**
21	** This program is distributed in the hope that it will be useful,
22	** but WITHOUT ANY WARRANTY; without even the implied warranty of
23	** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24	** GNU General Public License for more details.
25	**
26	** You should have received a copy of the GNU General Public License
27	** along with this program; if not, write to the Free Software
28	** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29	**
30	**-----------------------------------------------------------------------------
31	**
32	** The Linux port of the FreeBSD ncr driver has been achieved in
33	** november 1995 by:
34	**
35	** Gerard Roudier <groudier@club-internet.fr>
36	**
37	** Being given that this driver originates from the FreeBSD version, and
38	** in order to keep synergy on both, any suggested enhancements and corrections
39	** received on Linux are automatically a potential candidate for the FreeBSD
40	** version.
41	**
42	** The original driver has been written for 386bsd and FreeBSD by
43	** Wolfgang Stanglmeier <wolf@cologne.de>
44	** Stefan Esser <se@mi.Uni-Koeln.de>
45	**
46	**-----------------------------------------------------------------------------
47	**
48	** Major contributions:
49	** --------------------
50	**
51	** NVRAM detection and reading.
52	** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
53	**
54	*******************************************************************************
55	*/
56
57	/*
58	** Supported SCSI features:
59	** Synchronous data transfers
60	** Wide16 SCSI BUS
61	** Disconnection/Reselection
62	** Tagged command queuing
63	** SCSI Parity checking
64	**
65	** Supported NCR/SYMBIOS chips:
66	** 53C810A (8 bits, Fast 10, no rom BIOS)
67	** 53C825A (Wide, Fast 10, on-board rom BIOS)
68	** 53C860 (8 bits, Fast 20, no rom BIOS)
69	** 53C875 (Wide, Fast 20, on-board rom BIOS)
70	** 53C876 (Wide, Fast 20 Dual, on-board rom BIOS)
71	** 53C895 (Wide, Fast 40, on-board rom BIOS)
72	** 53C895A (Wide, Fast 40, on-board rom BIOS)
73	** 53C896 (Wide, Fast 40 Dual, on-board rom BIOS)
74	** 53C897 (Wide, Fast 40 Dual, on-board rom BIOS)
75	** 53C1510D (Wide, Fast 40 Dual, on-board rom BIOS)
76	** 53C1010 (Wide, Fast 80 Dual, on-board rom BIOS)
77	** 53C1010_66(Wide, Fast 80 Dual, on-board rom BIOS, 33/66MHz PCI)
78	**
79	** Other features:
80	** Memory mapped IO
81	** Module
82	** Shared IRQ
83	*/
84
85	/*
86	** Name and version of the driver
87	*/
88	#define SCSI_NCR_DRIVER_NAME"sym53c8xx-1.7.1-20000726" "sym53c8xx-1.7.1-20000726"
89
90	#define SCSI_NCR_DEBUG_FLAGS(0) (0)
91
92	#define NAME53C"sym53c" "sym53c"
93	#define NAME53C8XX"sym53c8xx" "sym53c8xx"
94
95	/*==========================================================
96	**
97	** Include files
98	**
99	**==========================================================
100	*/
101
102	#define LinuxVersionCode(v, p, s)(((v)<<16)+((p)<<8)+(s)) (((v)<<16)+((p)<<8)+(s))
103
104	#ifdef MODULE
105	#include <linux/module.h>
106	#endif
107
108	#include <asm/dma.h>
109	#include <asm/io.h>
110	#include <asm/system.h>
111	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,3,17)(((2)<<16)+((3)<<8)+(17))
112	#include <linux/spinlock.h>
113	#elif LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,93)(((2)<<16)+((1)<<8)+(93))
114	#include <asm/spinlock.h>
115	#endif
116	#include <linux/delay.h>
117	#include <linux/signal.h>
118	#include <linux/sched.h>
119	#include <linux/errno.h>
120	#include <linux/pci.h>
121	#include <linux/string.h>
122	#include <linux/malloc.h>
123	#include <linux/mm.h>
124	#include <linux/ioport.h>
125	#include <linux/time.h>
126	#include <linux/timer.h>
127	#include <linux/stat.h>
128
129	#include <linux/version.h>
130	#include <linux/blk.h>
131
132	#ifdef CONFIG_ALL_PPC
133	#include <asm/prom.h>
134	#endif
135
136	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,35)(((2)<<16)+((1)<<8)+(35))
137	#include <linux/init.h>
138	#endif
139
140	#ifndef __init
141	#define __init
142	#endif
143	#ifndef __initdata
144	#define __initdata
145	#endif
146
147	#if LINUX_VERSION_CODE131108 <= LinuxVersionCode(2,1,92)(((2)<<16)+((1)<<8)+(92))
148	#include <linux/bios32.h>
149	#endif
150
151	#include "scsi.h"
152	#include "hosts.h"
153	#include "constants.h"
154	#include "sd.h"
155
156	#include <linux/types.h>
157
158	/*
159	** Define BITS_PER_LONG for earlier linux versions.
160	*/
161	#ifndef BITS_PER_LONG32
162	#if (~0UL) == 0xffffffffUL
163	#define BITS_PER_LONG32 32
164	#else
165	#define BITS_PER_LONG32 64
166	#endif
167	#endif
168
169	/*
170	** Define the BSD style u_int32 and u_int64 type.
171	** Are in fact u_int32_t and u_int64_t :-)
172	*/
173	typedef u32 u_int32;
174	typedef u64 u_int64;
175
176	#include "sym53c8xx.h"
177
178	/*
179	** Donnot compile integrity checking code for Linux-2.3.0
180	** and above since SCSI data structures are not ready yet.
181	*/
182	/* #if LINUX_VERSION_CODE < LinuxVersionCode(2,3,0) */
183	#if 0
184	#define SCSI_NCR_INTEGRITY_CHECKING
185	#endif
186
187	#define MIN(a,b)(((a) < (b)) ? (a) : (b)) (((a) < (b)) ? (a) : (b))
188	#define MAX(a,b)(((a) > (b)) ? (a) : (b)) (((a) > (b)) ? (a) : (b))
189
190	/*
191	** Hmmm... What complex some PCI-HOST bridges actually are,
192	** despite the fact that the PCI specifications are looking
193	** so smart and simple! ;-)
194	*/
195	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,3,47)(((2)<<16)+((3)<<8)+(47))
196	#define SCSI_NCR_DYNAMIC_DMA_MAPPING
197	#endif
198
199	/*==========================================================
200	**
201	** A la VMS/CAM-3 queue management.
202	** Implemented from linux list management.
203	**
204	**==========================================================
205	*/
206
207	typedef struct xpt_quehead {
208	struct xpt_quehead flink; / Forward pointer */
209	struct xpt_quehead blink; / Backward pointer */
210	} XPT_QUEHEAD;
211
212	#define xpt_que_init(ptr)do { (ptr)->flink = (ptr); (ptr)->blink = (ptr); } while (0) do { \
213	(ptr)->flink = (ptr); (ptr)->blink = (ptr); \
214	} while (0)
215
216	static inlineinline __attribute__((always_inline)) void __xpt_que_add(struct xpt_quehead * new,
217	struct xpt_quehead * blink,
218	struct xpt_quehead * flink)
219	{
220	flink->blink = new;
221	new->flink = flink;
222	new->blink = blink;
223	blink->flink = new;
224	}
225
226	static inlineinline __attribute__((always_inline)) void __xpt_que_del(struct xpt_quehead * blink,
227	struct xpt_quehead * flink)
228	{
229	flink->blink = blink;
230	blink->flink = flink;
231	}
232
233	static inlineinline __attribute__((always_inline)) int xpt_que_empty(struct xpt_quehead *head)
234	{
235	return head->flink == head;
236	}
237
238	static inlineinline __attribute__((always_inline)) void xpt_que_splice(struct xpt_quehead *list,
239	struct xpt_quehead *head)
240	{
241	struct xpt_quehead *first = list->flink;
242
243	if (first != list) {
244	struct xpt_quehead *last = list->blink;
245	struct xpt_quehead *at = head->flink;
246
247	first->blink = head;
248	head->flink = first;
249
250	last->flink = at;
251	at->blink = last;
252	}
253	}
254
255	#define xpt_que_entry(ptr, type, member)((type )((char )(ptr)-(unsigned long)(&((type *)0)-> member))) \
256	((type )((char )(ptr)-(unsigned long)(&((type *)0)->member)))
257
258
259	#define xpt_insque(new, pos)__xpt_que_add(new, pos, (pos)->flink) __xpt_que_add(new, pos, (pos)->flink)
260
261	#define xpt_remque(el)__xpt_que_del((el)->blink, (el)->flink) __xpt_que_del((el)->blink, (el)->flink)
262
263	#define xpt_insque_head(new, head)__xpt_que_add(new, head, (head)->flink) __xpt_que_add(new, head, (head)->flink)
264
265	static inlineinline __attribute__((always_inline)) struct xpt_quehead xpt_remque_head(struct xpt_quehead head)
266	{
267	struct xpt_quehead *elem = head->flink;
268
269	if (elem != head)
270	__xpt_que_del(head, elem->flink);
271	else
272	elem = 0;
273	return elem;
274	}
275
276	#define xpt_insque_tail(new, head)__xpt_que_add(new, (head)->blink, head) __xpt_que_add(new, (head)->blink, head)
277
278	static inlineinline __attribute__((always_inline)) struct xpt_quehead xpt_remque_tail(struct xpt_quehead head)
279	{
280	struct xpt_quehead *elem = head->blink;
281
282	if (elem != head)
283	__xpt_que_del(elem->blink, head);
284	else
285	elem = 0;
286	return elem;
287	}
288
289	/*==========================================================
290	**
291	** Configuration and Debugging
292	**
293	**==========================================================
294	*/
295
296	/*
297	** SCSI address of this device.
298	** The boot routines should have set it.
299	** If not, use this.
300	*/
301
302	#ifndef SCSI_NCR_MYADDR(7)
303	#define SCSI_NCR_MYADDR(7) (7)
304	#endif
305
306	/*
307	** The maximum number of tags per logic unit.
308	** Used only for devices that support tags.
309	*/
310
311	#ifndef SCSI_NCR_MAX_TAGS(8)
312	#define SCSI_NCR_MAX_TAGS(8) (8)
313	#endif
314
315	/*
316	** TAGS are actually unlimited (256 tags/lun).
317	** But Linux only supports 255. :)
318	*/
319	#if SCSI_NCR_MAX_TAGS(8) > 255
320	#define MAX_TAGS(8) 255
321	#else
322	#define MAX_TAGS(8) SCSI_NCR_MAX_TAGS(8)
323	#endif
324
325	/*
326	** Since the ncr chips only have a 8 bit ALU, we try to be clever
327	** about offset calculation in the TASK TABLE per LUN that is an
328	** array of DWORDS = 4 bytes.
329	*/
330	#if MAX_TAGS(8) > (512/4)
331	#define MAX_TASKS(256/4) (1024/4)
332	#elif MAX_TAGS(8) > (256/4)
333	#define MAX_TASKS(256/4) (512/4)
334	#else
335	#define MAX_TASKS(256/4) (256/4)
336	#endif
337
338	/*
339	** This one means 'NO TAG for this job'
340	*/
341	#define NO_TAG(256) (256)
342
343	/*
344	** Number of targets supported by the driver.
345	** n permits target numbers 0..n-1.
346	** Default is 16, meaning targets #0..#15.
347	** #7 .. is myself.
348	*/
349
350	#ifdef SCSI_NCR_MAX_TARGET(16)
351	#define MAX_TARGET((16)) (SCSI_NCR_MAX_TARGET(16))
352	#else
353	#define MAX_TARGET((16)) (16)
354	#endif
355
356	/*
357	** Number of logic units supported by the driver.
358	** n enables logic unit numbers 0..n-1.
359	** The common SCSI devices require only
360	** one lun, so take 1 as the default.
361	*/
362
363	#ifdef SCSI_NCR_MAX_LUN(16)
364	#define MAX_LUN64 64
365	#else
366	#define MAX_LUN64 (1)
367	#endif
368
369	/*
370	** Asynchronous pre-scaler (ns). Shall be 40 for
371	** the SCSI timings to be compliant.
372	*/
373
374	#ifndef SCSI_NCR_MIN_ASYNC(40)
375	#define SCSI_NCR_MIN_ASYNC(40) (40)
376	#endif
377
378	/*
379	** The maximum number of jobs scheduled for starting.
380	** We allocate 4 entries more than the value we announce
381	** to the SCSI upper layer. Guess why ! :-)
382	*/
383
384	#ifdef SCSI_NCR_CAN_QUEUE(8(8) + 2(16))
385	#define MAX_START((8(8) + 2(16)) + 4) (SCSI_NCR_CAN_QUEUE(8(8) + 2(16)) + 4)
386	#else
387	#define MAX_START((8(8) + 2(16)) + 4) (MAX_TARGET((16)) + 7 * MAX_TAGS(8))
388	#endif
389
390	/*
391	** We donnot want to allocate more than 1 PAGE for the
392	** the start queue and the done queue. We hard-code entry
393	** size to 8 in order to let cpp do the checking.
394	** Allows 512-4=508 pending IOs for i386 but Linux seems for
395	** now not able to provide the driver with this amount of IOs.
396	*/
397	#if MAX_START((8(8) + 2(16)) + 4) > PAGE_SIZE(1 << 12)/8
398	#undef MAX_START((8(8) + 2(16)) + 4)
399	#define MAX_START((8(8) + 2(16)) + 4) (PAGE_SIZE(1 << 12)/8)
400	#endif
401
402	/*
403	** The maximum number of segments a transfer is split into.
404	** We support up to 127 segments for both read and write.
405	*/
406
407	#define MAX_SCATTER((127)) (SCSI_NCR_MAX_SCATTER(127))
408	#define SCR_SG_SIZE(2) (2)
409
410	/*
411	** other
412	*/
413
414	#define NCR_SNOOP_TIMEOUT(1000000) (1000000)
415
416	/*==========================================================
417	**
418	** Miscallaneous BSDish defines.
419	**
420	**==========================================================
421	*/
422
423	#define u_charunsigned char unsigned char
424	#define u_shortunsigned short unsigned short
425	#define u_intunsigned int unsigned int
426	#define u_longunsigned long unsigned long
427
428	#ifndef bcopy
429	#define bcopy(s, d, n)(__builtin_constant_p((n)) ? __constant_memcpy(((d)),((s)),(( n))) : __memcpy(((d)),((s)),((n)))) memcpy((d), (s), (n))(__builtin_constant_p((n)) ? __constant_memcpy(((d)),((s)),(( n))) : __memcpy(((d)),((s)),((n))))
430	#endif
431
432	#ifndef bzero
433	#define bzero(d, n)(__builtin_constant_p(0) ? (__builtin_constant_p(((n))) ? __constant_c_and_count_memset ((((d))),((0x01010101UL(unsigned char)(0))),(((n)))) : __constant_c_memset ((((d))),((0x01010101UL(unsigned char)(0))),(((n))))) : (__builtin_constant_p (((n))) ? __memset_generic(((((d)))),(((0))),((((n))))) : __memset_generic ((((d))),((0)),(((n)))))) memset((d), 0, (n))(__builtin_constant_p(0) ? (__builtin_constant_p(((n))) ? __constant_c_and_count_memset ((((d))),((0x01010101UL(unsigned char)(0))),(((n)))) : __constant_c_memset ((((d))),((0x01010101UL(unsigned char)(0))),(((n))))) : (__builtin_constant_p (((n))) ? __memset_generic(((((d)))),(((0))),((((n))))) : __memset_generic ((((d))),((0)),(((n))))))
434	#endif
435
436	#ifndef offsetof
437	#define offsetof(t, m)((size_t) (&((t )0)->m)) ((size_t) (&((t )0)->m))
438	#endif
439
440	/*
441	** Simple Wrapper to kernel PCI bus interface.
442	**
443	** This wrapper allows to get rid of old kernel PCI interface
444	** and still allows to preserve linux-2.0 compatibilty.
445	** In fact, it is mostly an incomplete emulation of the new
446	** PCI code for pre-2.2 kernels. When kernel-2.0 support
447	** will be dropped, we will just have to remove most of this
448	** code.
449	*/
450
451	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,2,0)(((2)<<16)+((2)<<8)+(0))
452
453	typedef struct pci_dev *pcidev_t;
454	#define PCIDEV_NULL(~0u) (0)
455	#define PciBusNumber(d)((d)>>8) (d)->bus->number
456	#define PciDeviceFn(d)((d)&0xff) (d)->devfn
457	#define PciVendorId(d) (d)->vendor
458	#define PciDeviceId(d) (d)->device
459	#define PciIrqLine(d) (d)->irq
460
461	#if LINUX_VERSION_CODE131108 > LinuxVersionCode(2,3,12)(((2)<<16)+((3)<<8)+(12))
462
463	static int __init
464	pci_get_base_address(struct pci_dev pdev, int index, u_longunsigned long base)
465	{
466	*base = pdev->resource[index].start;
467	if ((pdev->resource[index].flags & 0x7) == 0x4)
468	++index;
469	return ++index;
470	}
471	#else
472	static int __init
473	pci_get_base_address(struct pci_dev pdev, int index, u_longunsigned long base)
474	{
475	*base = pdev->base_address[index++];
476	if ((*base & 0x7) == 0x4) {
477	#if BITS_PER_LONG32 > 32
478	*base \|= (((u_longunsigned long)pdev->base_address[index]) << 32);
479	#endif
480	++index;
481	}
482	return index;
483	}
484	#endif
485
486	#else /* Incomplete emulation of current PCI code for pre-2.2 kernels */
487
488	typedef unsigned int pcidev_t;
489	#define PCIDEV_NULL(~0u) (~0u)
490	#define PciBusNumber(d)((d)>>8) ((d)>>8)
491	#define PciDeviceFn(d)((d)&0xff) ((d)&0xff)
492	#define __PciDev(busn, devfn)(((busn)<<8)+(devfn)) (((busn)<<8)+(devfn))
493
494	#define pci_presentpcibios_present pcibios_present
495
496	#define pci_read_config_byte(d, w, v)pcibios_read_config_byte(((d)>>8), ((d)&0xff), w, v ) \
497	pcibios_read_config_byte(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
498	#define pci_read_config_word(d, w, v)pcibios_read_config_word(((d)>>8), ((d)&0xff), w, v ) \
499	pcibios_read_config_word(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
500	#define pci_read_config_dword(d, w, v)pcibios_read_config_dword(((d)>>8), ((d)&0xff), w, v ) \
501	pcibios_read_config_dword(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
502
503	#define pci_write_config_byte(d, w, v)pcibios_write_config_byte(((d)>>8), ((d)&0xff), w, v ) \
504	pcibios_write_config_byte(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
505	#define pci_write_config_word(d, w, v)pcibios_write_config_word(((d)>>8), ((d)&0xff), w, v ) \
506	pcibios_write_config_word(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
507	#define pci_write_config_dword(d, w, v)pcibios_write_config_dword(((d)>>8), ((d)&0xff), w, v) \
508	pcibios_write_config_dword(PciBusNumber(d)((d)>>8), PciDeviceFn(d)((d)&0xff), w, v)
509
510	static pcidev_t __init
511	pci_find_device(unsigned int vendor, unsigned int device, pcidev_t prev)
512	{
513	static unsigned short pci_index;
514	int retv;
515	unsigned char bus_number, device_fn;
516
517	if (prev == PCIDEV_NULL(~0u))
518	pci_index = 0;
519	else
520	++pci_index;
521	retv = pcibios_find_device (vendor, device, pci_index,
522	&bus_number, &device_fn);
523	return retv ? PCIDEV_NULL(~0u) : __PciDev(bus_number, device_fn)(((bus_number)<<8)+(device_fn));
524	}
525
526	static u_shortunsigned short __init PciVendorId(pcidev_t dev)
527	{
528	u_shortunsigned short vendor_id;
529	pci_read_config_word(dev, PCI_VENDOR_ID, &vendor_id)pcibios_read_config_word(((dev)>>8), ((dev)&0xff), 0x00 , &vendor_id);
530	return vendor_id;
531	}
532
533	static u_shortunsigned short __init PciDeviceId(pcidev_t dev)
534	{
535	u_shortunsigned short device_id;
536	pci_read_config_word(dev, PCI_DEVICE_ID, &device_id)pcibios_read_config_word(((dev)>>8), ((dev)&0xff), 0x02 , &device_id);
537	return device_id;
538	}
539
540	static u_intunsigned int __init PciIrqLine(pcidev_t dev)
541	{
542	u_charunsigned char irq;
543	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq)pcibios_read_config_byte(((dev)>>8), ((dev)&0xff), 0x3c , &irq);
544	return irq;
545	}
546
547	static int __init
548	pci_get_base_address(pcidev_t dev, int offset, u_longunsigned long *base)
549	{
550	u_int32 tmp;
551
552	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + offset, &tmp)pcibios_read_config_dword(((dev)>>8), ((dev)&0xff), 0x10 + offset, &tmp);
553	*base = tmp;
554	offset += sizeof(u_int32);
555	if ((tmp & 0x7) == 0x4) {
556	#if BITS_PER_LONG32 > 32
557	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + offset, &tmp)pcibios_read_config_dword(((dev)>>8), ((dev)&0xff), 0x10 + offset, &tmp);
558	*base \|= (((u_longunsigned long)tmp) << 32);
559	#endif
560	offset += sizeof(u_int32);
561	}
562	return offset;
563	}
564
565	#endif /* LINUX_VERSION_CODE >= LinuxVersionCode(2,2,0) */
566
567	/*==========================================================
568	**
569	** Debugging tags
570	**
571	**==========================================================
572	*/
573
574	#define DEBUG_ALLOC(0x0001) (0x0001)
575	#define DEBUG_PHASE(0x0002) (0x0002)
576	#define DEBUG_QUEUE(0x0008) (0x0008)
577	#define DEBUG_RESULT(0x0010) (0x0010)
578	#define DEBUG_POINTER(0x0020) (0x0020)
579	#define DEBUG_SCRIPT(0x0040) (0x0040)
580	#define DEBUG_TINY(0x0080) (0x0080)
581	#define DEBUG_TIMING(0x0100) (0x0100)
582	#define DEBUG_NEGO(0x0200) (0x0200)
583	#define DEBUG_TAGS(0x0400) (0x0400)
584	#define DEBUG_IC(0x0800) (0x0800)
585
586	/*
587	** Enable/Disable debug messages.
588	** Can be changed at runtime too.
589	*/
590
591	#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
592	static int ncr_debug = SCSI_NCR_DEBUG_FLAGS(0);
593	#define DEBUG_FLAGSncr_debug ncr_debug
594	#else
595	#define DEBUG_FLAGSncr_debug SCSI_NCR_DEBUG_FLAGS(0)
596	#endif
597
598	/*
599	** SMP threading.
600	**
601	** Assuming that SMP systems are generally high end systems and may
602	** use several SCSI adapters, we are using one lock per controller
603	** instead of some global one. For the moment (linux-2.1.95), driver's
604	** entry points are called with the 'io_request_lock' lock held, so:
605	** - We are uselessly loosing a couple of micro-seconds to lock the
606	** controller data structure.
607	** - But the driver is not broken by design for SMP and so can be
608	** more resistant to bugs or bad changes in the IO sub-system code.
609	** - A small advantage could be that the interrupt code is grained as
610	** wished (e.g.: threaded by controller).
611	*/
612
613	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,93)(((2)<<16)+((1)<<8)+(93))
614
615	spinlock_t sym53c8xx_lock = SPIN_LOCK_UNLOCKED;
616	#define NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0) spin_lock_irqsave(&sym53c8xx_lock, flags)
617	#define NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0) spin_unlock_irqrestore(&sym53c8xx_lock,flags)
618
619	#define NCR_INIT_LOCK_NCB(np)do { } while (0) spin_lock_init(&np->smp_lock);
620	#define NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0) spin_lock_irqsave(&np->smp_lock, flags)
621	#define NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0) spin_unlock_irqrestore(&np->smp_lock, flags)
622
623	#define NCR_LOCK_SCSI_DONE(np, flags)do {;} while (0) \
624	spin_lock_irqsave(&io_request_lock, flags)
625	#define NCR_UNLOCK_SCSI_DONE(np, flags)do {;} while (0) \
626	spin_unlock_irqrestore(&io_request_lock, flags)
627
628	#else
629
630	#define NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0) do { save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); cli()__asm__ __volatile__ ("cli": : :"memory"); } while (0)
631	#define NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0) do { restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); } while (0)
632
633	#define NCR_INIT_LOCK_NCB(np)do { } while (0) do { } while (0)
634	#define NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0) do { save_flags(flags)__asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); cli()__asm__ __volatile__ ("cli": : :"memory"); } while (0)
635	#define NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0) do { restore_flags(flags)__asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory"); } while (0)
636
637	#define NCR_LOCK_SCSI_DONE(np, flags)do {;} while (0) do {;} while (0)
638	#define NCR_UNLOCK_SCSI_DONE(np, flags)do {;} while (0) do {;} while (0)
639
640	#endif
641
642	/*
643	** Memory mapped IO
644	**
645	** Since linux-2.1, we must use ioremap() to map the io memory space.
646	** iounmap() to unmap it. That allows portability.
647	** Linux 1.3.X and 2.0.X allow to remap physical pages addresses greater
648	** than the highest physical memory address to kernel virtual pages with
649	** vremap() / vfree(). That was not portable but worked with i386
650	** architecture.
651	*/
652
653	#if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,1,0)(((2)<<16)+((1)<<8)+(0))
654	#define ioremapvremap vremap
655	#define iounmapvfree vfree
656	#endif
657
658	#ifdef __sparc__
659	# include <asm/irq.h>
660	# if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,3,0)(((2)<<16)+((3)<<8)+(0))
661	/* ioremap/iounmap broken in 2.2.x on Sparc. -DaveM */
662	# define ioremapvremap(base, size) ((u_longunsigned long) __va(base))
663	# define iounmapvfree(vaddr)
664	# endif
665	# define pcivtobus(p)(p) bus_dvma_to_mem(p)
666	# define memcpy_to_pci(a, b, c)(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((a ))),(((b))),(((c)))) : __memcpy(((void )((a))),(((b))),(((c) )))) memcpy_toio((void )(a), (const void )(b), (c))(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((void )(a))),(((const void )(b))),(((c)))) : __memcpy(((void )( (void )(a))),(((const void )(b))),(((c)))))
667	#elif defined(__alpha__)
668	# define pcivtobus(p)(p) ((p) & 0xfffffffful)
669	# define memcpy_to_pci(a, b, c)(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((a ))),(((b))),(((c)))) : __memcpy(((void )((a))),(((b))),(((c) )))) memcpy_toio((a), (b), (c))(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((a ))),(((b))),(((c)))) : __memcpy(((void )((a))),(((b))),(((c) ))))
670	#else /* others */
671	# define pcivtobus(p)(p) (p)
672	# define memcpy_to_pci(a, b, c)(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((a ))),(((b))),(((c)))) : __memcpy(((void )((a))),(((b))),(((c) )))) memcpy_toio((a), (b), (c))(__builtin_constant_p(((c))) ? __constant_memcpy(((void )((a ))),(((b))),(((c)))) : __memcpy(((void )((a))),(((b))),(((c) ))))
673	#endif
674
675	#ifndef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
676	static u_longunsigned long __init remap_pci_mem(u_longunsigned long base, u_longunsigned long size)
677	{
678	u_longunsigned long page_base = ((u_longunsigned long) base) & PAGE_MASK((1 << 12)-1);
679	u_longunsigned long page_offs = ((u_longunsigned long) base) - page_base;
680	u_longunsigned long page_remapped = (u_longunsigned long) ioremapvremap(page_base, page_offs+size);
681
682	return page_remapped? (page_remapped + page_offs) : 0UL;
683	}
684
685	static void __init unmap_pci_mem(u_longunsigned long vaddr, u_longunsigned long size)
686	{
687	if (vaddr)
688	iounmapvfree((void *) (vaddr & PAGE_MASK((1 << 12)-1)));
689	}
690
691	#endif /* not def SCSI_NCR_PCI_MEM_NOT_SUPPORTED */
692
693	/*
694	** Insert a delay in micro-seconds and milli-seconds.
695	** -------------------------------------------------
696	** Under Linux, udelay() is restricted to delay < 1 milli-second.
697	** In fact, it generally works for up to 1 second delay.
698	** Since 2.1.105, the mdelay() function is provided for delays
699	** in milli-seconds.
700	** Under 2.0 kernels, udelay() is an inline function that is very
701	** inaccurate on Pentium processors.
702	*/
703
704	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,105)(((2)<<16)+((1)<<8)+(105))
705	#define UDELAY udelay
706	#define MDELAY mdelay
707	#else
708	static void UDELAY(long us) { udelay(us)(__builtin_constant_p(us) ? __const_udelay((us) * 0x10c6ul) : __udelay(us)); }
709	static void MDELAY(long ms) { while (ms--) UDELAY(1000); }
710	#endif
711
712	/*
713	** Simple power of two buddy-like allocator
714	** ----------------------------------------
715	** This simple code is not intended to be fast, but to provide
716	** power of 2 aligned memory allocations.
717	** Since the SCRIPTS processor only supplies 8 bit arithmetic,
718	** this allocator allows simple and fast address calculations
719	** from the SCRIPTS code. In addition, cache line alignment
720	** is guaranteed for power of 2 cache line size.
721	** Enhanced in linux-2.3.44 to provide a memory pool per pcidev
722	** to support dynamic dma mapping. (I would have preferred a
723	** real bus astraction, btw).
724	*/
725
726	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,0)(((2)<<16)+((1)<<8)+(0))
727	#define __GetFreePages(flags, order)__get_free_pages(flags, order, 0) __get_free_pages(flags, order)
728	#else
729	#define __GetFreePages(flags, order)__get_free_pages(flags, order, 0) __get_free_pages(flags, order, 0)
730	#endif
731
732	#define MEMO_SHIFT4 4 /* 16 bytes minimum memory chunk */
733	#if PAGE_SIZE(1 << 12) >= 8192
734	#define MEMO_PAGE_ORDER1 0 /* 1 PAGE maximum */
735	#else
736	#define MEMO_PAGE_ORDER1 1 /* 2 PAGES maximum */
737	#endif
738	#define MEMO_FREE_UNUSED /* Free unused pages immediately */
739	#define MEMO_WARN1 1
740	#define MEMO_GFP_FLAGS0x01 GFP_ATOMIC0x01
741	#define MEMO_CLUSTER_SHIFT(12 +1) (PAGE_SHIFT12+MEMO_PAGE_ORDER1)
742	#define MEMO_CLUSTER_SIZE(1UL << (12 +1)) (1UL << MEMO_CLUSTER_SHIFT(12 +1))
743	#define MEMO_CLUSTER_MASK((1UL << (12 +1))-1) (MEMO_CLUSTER_SIZE(1UL << (12 +1))-1)
744
745	typedef u_longunsigned long m_addr_t; /* Enough bits to bit-hack addresses */
746	typedef pcidev_t m_bush_t; /* Something that addresses DMAable */
747
748	typedef struct m_link { /* Link between free memory chunks */
749	struct m_link *next;
750	} m_link_s;
751
752	#ifdef SCSI_NCR_DYNAMIC_DMA_MAPPING
753	typedef struct m_vtob { /* Virtual to Bus address translation */
754	struct m_vtob *next;
755	m_addr_t vaddr;
756	m_addr_t baddr;
757	} m_vtob_s;
758	#define VTOB_HASH_SHIFT 5
759	#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
760	#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
761	#define VTOB_HASH_CODE(m) \
762	((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT(12 +1)) & VTOB_HASH_MASK)
763	#endif
764
765	typedef struct m_pool { /* Memory pool of a given kind */
766	#ifdef SCSI_NCR_DYNAMIC_DMA_MAPPING
767	m_bush_t bush;
768	m_addr_t (getp)(struct m_pool );
769	void (freep)(struct m_pool , m_addr_t);
770	#define M_GETP()__get_free_pages(0x01, 1, 0) mp->getp(mp)
771	#define M_FREEP(p)free_pages(p, 1) mp->freep(mp, p)
772	#define GetPages() __GetFreePages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER)__get_free_pages(0x01, 1, 0)
773	#define FreePages(p) free_pages(p, MEMO_PAGE_ORDER1)
774	int nump;
775	m_vtob_s *(vtob[VTOB_HASH_SIZE]);
776	struct m_pool *next;
777	#else
778	#define M_GETP()__get_free_pages(0x01, 1, 0) __GetFreePages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER)__get_free_pages(0x01, 1, 0)
779	#define M_FREEP(p)free_pages(p, 1) free_pages(p, MEMO_PAGE_ORDER1)
780	#endif /* SCSI_NCR_DYNAMIC_DMA_MAPPING */
781	struct m_link h[PAGE_SHIFT12-MEMO_SHIFT4+MEMO_PAGE_ORDER1+1];
782	} m_pool_s;
783
784	static void ___m_alloc(m_pool_s mp, int size)
785	{
786	int i = 0;
787	int s = (1 << MEMO_SHIFT4);
788	int j;
789	m_addr_t a;
790	m_link_s *h = mp->h;
791
792	if (size > (PAGE_SIZE(1 << 12) << MEMO_PAGE_ORDER1))
793	return 0;
794
795	while (size > s) {
796	s <<= 1;
797	++i;
798	}
799
800	j = i;
801	while (!h[j].next) {
802	if (s == (PAGE_SIZE(1 << 12) << MEMO_PAGE_ORDER1)) {
803	h[j].next = (m_link_s *) M_GETP()__get_free_pages(0x01, 1, 0);
804	if (h[j].next)
805	h[j].next->next = 0;
806	break;
807	}
808	++j;
809	s <<= 1;
810	}
811	a = (m_addr_t) h[j].next;
812	if (a) {
813	h[j].next = h[j].next->next;
814	while (j > i) {
815	j -= 1;
816	s >>= 1;
817	h[j].next = (m_link_s *) (a+s);
818	h[j].next->next = 0;
819	}
820	}
821	#ifdef DEBUG
822	printk("___m_alloc(%d) = %p\n", size, (void *) a);
823	#endif
824	return (void *) a;
825	}
826
827	static void ___m_free(m_pool_s mp, void ptr, int size)
828	{
829	int i = 0;
830	int s = (1 << MEMO_SHIFT4);
831	m_link_s *q;
832	m_addr_t a, b;
833	m_link_s *h = mp->h;
834
835	#ifdef DEBUG
836	printk("___m_free(%p, %d)\n", ptr, size);
837	#endif
838
839	if (size > (PAGE_SIZE(1 << 12) << MEMO_PAGE_ORDER1))
840	return;
841
842	while (size > s) {
843	s <<= 1;
844	++i;
845	}
846
847	a = (m_addr_t) ptr;
848
849	while (1) {
850	#ifdef MEMO_FREE_UNUSED
851	if (s == (PAGE_SIZE(1 << 12) << MEMO_PAGE_ORDER1)) {
852	M_FREEP(a)free_pages(a, 1);
853	break;
854	}
855	#endif
856	b = a ^ s;
857	q = &h[i];
858	while (q->next && q->next != (m_link_s *) b) {
859	q = q->next;
860	}
861	if (!q->next) {
862	((m_link_s *) a)->next = h[i].next;
863	h[i].next = (m_link_s *) a;
864	break;
865	}
866	q->next = q->next->next;
867	a = a & b;
868	s <<= 1;
869	++i;
870	}
871	}
872
873	static void __m_calloc2(m_pool_s mp, int size, char *name, int uflags)
874	{
875	void *p;
876
877	p = ___m_alloc(mp, size);
878
879	if (DEBUG_FLAGSncr_debug & DEBUG_ALLOC(0x0001))
880	printk ("new %-10s[%4d] @%p.\n", name, size, p);
881
882	if (p)
883	bzero(p, size)(__builtin_constant_p(0) ? (__builtin_constant_p(((size))) ? __constant_c_and_count_memset ((((p))),((0x01010101UL(unsigned char)(0))),(((size)))) : __constant_c_memset ((((p))),((0x01010101UL(unsigned char)(0))),(((size))))) : ( __builtin_constant_p(((size))) ? __memset_generic(((((p)))),( ((0))),((((size))))) : __memset_generic((((p))),((0)),(((size ))))));
884	else if (uflags & MEMO_WARN1)
885	printk (NAME53C8XX"sym53c8xx" ": failed to allocate %s[%d]\n", name, size);
886
887	return p;
888	}
889
890	#define __m_calloc(mp, s, n)__m_calloc2(mp, s, n, 1) __m_calloc2(mp, s, n, MEMO_WARN1)
891
892	static void __m_free(m_pool_s mp, void ptr, int size, char *name)
893	{
894	if (DEBUG_FLAGSncr_debug & DEBUG_ALLOC(0x0001))
895	printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
896
897	___m_free(mp, ptr, size);
898
899	}
900
901	/*
902	* With pci bus iommu support, we use a default pool of unmapped memory
903	* for memory we donnot need to DMA from/to and one pool per pcidev for
904	* memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
905	*/
906
907	#ifndef SCSI_NCR_DYNAMIC_DMA_MAPPING
908
909	static m_pool_s mp0;
910
911	#else
912
913	static m_addr_t ___mp0_getp(m_pool_s *mp)
914	{
915	m_addr_t m = GetPages();
916	if (m)
917	++mp->nump;
918	return m;
919	}
920
921	static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
922	{
923	FreePages(m);
924	--mp->nump;
925	}
926
927	static m_pool_s mp0 = {0, ___mp0_getp, ___mp0_freep};
928
929	#endif /* SCSI_NCR_DYNAMIC_DMA_MAPPING */
930
931	static void m_calloc(int size, char name)
932	{
933	u_longunsigned long flags;
934	void *m;
935	NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
936	m = __m_calloc(&mp0, size, name)__m_calloc2(&mp0, size, name, 1);
937	NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
938	return m;
939	}
940
941	static void m_free(void ptr, int size, char name)
942	{
943	u_longunsigned long flags;
944	NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
945	__m_free(&mp0, ptr, size, name);
946	NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
947	}
948
949	/*
950	* DMAable pools.
951	*/
952
953	#ifndef SCSI_NCR_DYNAMIC_DMA_MAPPING
954
955	/* Without pci bus iommu support, all the memory is assumed DMAable */
956
957	#define __m_calloc_dma(b, s, n)m_calloc(s, n) m_calloc(s, n)
958	#define __m_free_dma(b, p, s, n)m_free(p, s, n) m_free(p, s, n)
959	#define __vtobus(b, p)virt_to_phys(p) virt_to_busvirt_to_phys(p)
960
961	#else
962
963	/*
964	* With pci bus iommu support, we maintain one pool per pcidev and a
965	* hashed reverse table for virtual to bus physical address translations.
966	*/
967	static m_addr_t ___dma_getp(m_pool_s *mp)
968	{
969	m_addr_t vp;
970	m_vtob_s *vbp;
971
972	vbp = __m_calloc(&mp0, sizeof(vbp), "VTOB")__m_calloc2(&mp0, sizeof(vbp), "VTOB", 1);
973	if (vbp) {
974	dma_addr_t daddr;
975	vp = (m_addr_t) pci_alloc_consistent(mp->bush,
976	PAGE_SIZE(1 << 12)<<MEMO_PAGE_ORDER1,
977	&daddr);
978	if (vp) {
979	int hc = VTOB_HASH_CODE(vp);
980	vbp->vaddr = vp;
981	vbp->baddr = daddr;
982	vbp->next = mp->vtob[hc];
983	mp->vtob[hc] = vbp;
984	++mp->nump;
985	return vp;
986	}
987	else
988	__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
989	}
990	return 0;
991	}
992
993	static void ___dma_freep(m_pool_s *mp, m_addr_t m)
994	{
995	m_vtob_s *vbpp, vbp;
996	int hc = VTOB_HASH_CODE(m);
997
998	vbpp = &mp->vtob[hc];
999	while (vbpp && (vbpp)->vaddr != m)
1000	vbpp = &(*vbpp)->next;
1001	if (*vbpp) {
1002	vbp = *vbpp;
1003	vbpp = (vbpp)->next;
1004	pci_free_consistent(mp->bush, PAGE_SIZE(1 << 12)<<MEMO_PAGE_ORDER1,
1005	(void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
1006	__m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
1007	--mp->nump;
1008	}
1009	}
1010
1011	static inlineinline __attribute__((always_inline)) m_pool_s *___get_dma_pool(m_bush_t bush)
1012	{
1013	m_pool_s *mp;
1014	for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
1015	return mp;
1016	}
1017
1018	static m_pool_s *___cre_dma_pool(m_bush_t bush)
1019	{
1020	m_pool_s *mp;
1021	mp = __m_calloc(&mp0, sizeof(mp), "MPOOL")__m_calloc2(&mp0, sizeof(mp), "MPOOL", 1);
1022	if (mp) {
1023	bzero(mp, sizeof(mp))(__builtin_constant_p(0) ? (__builtin_constant_p(((sizeof(mp )))) ? __constant_c_and_count_memset((((mp))),((0x01010101UL* (unsigned char)(0))),(((sizeof(mp))))) : __constant_c_memset ((((mp))),((0x01010101UL(unsigned char)(0))),(((sizeof(mp)) )))) : (__builtin_constant_p(((sizeof(mp)))) ? __memset_generic (((((mp)))),(((0))),((((sizeof(mp)))))) : __memset_generic(( ((mp))),((0)),(((sizeof(mp)))))));
1024	mp->bush = bush;
1025	mp->getp = ___dma_getp;
1026	mp->freep = ___dma_freep;
1027	mp->next = mp0.next;
1028	mp0.next = mp;
1029	}
1030	return mp;
1031	}
1032
1033	static void ___del_dma_pool(m_pool_s *p)
1034	{
1035	struct m_pool **pp = &mp0.next;
1036
1037	while (pp && pp != p)
1038	pp = &(*pp)->next;
1039	if (*pp) {
1040	pp = (pp)->next;
1041	__m_free(&mp0, p, sizeof(*p), "MPOOL");
1042	}
1043	}
1044
1045	static void __m_calloc_dma(m_bush_t bush, int size, char name)m_calloc(int size, char *name)
1046	{
1047	u_longunsigned long flags;
1048	struct m_pool *mp;
1049	void *m = 0;
1050
1051	NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
1052	mp = ___get_dma_pool(bush);
1053	if (!mp)
1054	mp = ___cre_dma_pool(bush);
1055	if (mp)
1056	m = __m_calloc(mp, size, name)__m_calloc2(mp, size, name, 1);
1057	if (mp && !mp->nump)
1058	___del_dma_pool(mp);
1059	NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
1060
1061	return m;
1062	}
1063
1064	static void __m_free_dma(m_bush_t bush, void m, int size, char name)m_free(void m, int size, char name)
1065	{
1066	u_longunsigned long flags;
1067	struct m_pool *mp;
1068
1069	NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
1070	mp = ___get_dma_pool(bush);
1071	if (mp)
1072	__m_free(mp, m, size, name);
1073	if (mp && !mp->nump)
1074	___del_dma_pool(mp);
1075	NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
1076	}
1077
1078	static m_addr_t __vtobus(m_bush_t bush, void m)virt_to_phys(void m)
1079	{
1080	u_longunsigned long flags;
1081	m_pool_s *mp;
1082	int hc = VTOB_HASH_CODE(m);
1083	m_vtob_s *vp = 0;
1084	m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK((1UL << (12 +1))-1);
1085
1086	NCR_LOCK_DRIVER(flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
1087	mp = ___get_dma_pool(bush);
1088	if (mp) {
1089	vp = mp->vtob[hc];
1090	while (vp && (m_addr_t) vp->vaddr != a)
1091	vp = vp->next;
1092	}
1093	NCR_UNLOCK_DRIVER(flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
1094	return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
1095	}
1096
1097	#endif /* SCSI_NCR_DYNAMIC_DMA_MAPPING */
1098
1099	#define _m_calloc_dma(np, s, n)m_calloc(s, n) __m_calloc_dma(np->pdev, s, n)m_calloc(s, n)
1100	#define _m_free_dma(np, p, s, n)m_free(p, s, n) __m_free_dma(np->pdev, p, s, n)m_free(p, s, n)
1101	#define m_calloc_dma(s, n)m_calloc(s, n) _m_calloc_dma(np, s, n)m_calloc(s, n)
1102	#define m_free_dma(p, s, n)m_free(p, s, n) _m_free_dma(np, p, s, n)m_free(p, s, n)
1103	#define _vtobus(np, p)virt_to_phys(p) __vtobus(np->pdev, p)virt_to_phys(p)
1104	#define vtobus(p)virt_to_phys(p) _vtobus(np, p)virt_to_phys(p)
1105
1106	/*
1107	* Deal with DMA mapping/unmapping.
1108	*/
1109
1110	#ifndef SCSI_NCR_DYNAMIC_DMA_MAPPING
1111
1112	/* Linux versions prior to pci bus iommu kernel interface */
1113
1114	#define __unmap_scsi_data(pdev, cmd)do {; } while (0) do {; } while (0)
1115	#define __map_scsi_single_data(pdev, cmd)(virt_to_phys((cmd)->request_buffer)) (__vtobus(pdev,(cmd)->request_buffer)virt_to_phys((cmd)->request_buffer))
1116	#define __map_scsi_sg_data(pdev, cmd)((cmd)->use_sg) ((cmd)->use_sg)
1117	#define __sync_scsi_data(pdev, cmd)do {; } while (0) do {; } while (0)
1118
1119	#define scsi_sg_dma_address(sc)virt_to_phys((sc)->address) vtobus((sc)->address)virt_to_phys((sc)->address)
1120	#define scsi_sg_dma_len(sc)((sc)->length) ((sc)->length)
1121
1122	#else
1123
1124	/* Linux version with pci bus iommu kernel interface */
1125
1126	/* To keep track of the dma mapping (sg/single) that has been set */
1127	#define __data_mapped SCp.phase
1128	#define __data_mapping SCp.have_data_in
1129
1130	static void __unmap_scsi_data(pcidev_t pdev, Scsi_Cmnd *cmd)do {; } while (0)
1131	{
1132	int dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
1133
1134	switch(cmd->__data_mapped) {
1135	case 2:
1136	pci_unmap_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
1137	break;
1138	case 1:
1139	pci_unmap_single(pdev, cmd->__data_mapping,
1140	cmd->request_bufflen, dma_dir);
1141	break;
1142	}
1143	cmd->__data_mapped = 0;
1144	}
1145
1146	static u_longunsigned long __map_scsi_single_data(pcidev_t pdev, Scsi_Cmnd cmd)(virt_to_phys((Scsi_Cmnd cmd)->request_buffer))
1147	{
1148	dma_addr_t mapping;
1149	int dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
1150
1151	if (cmd->request_bufflen == 0)
1152	return 0;
1153
1154	mapping = pci_map_single(pdev, cmd->request_buffer,
1155	cmd->request_bufflen, dma_dir);
1156	cmd->__data_mapped = 1;
1157	cmd->__data_mapping = mapping;
1158
1159	return mapping;
1160	}
1161
1162	static int __map_scsi_sg_data(pcidev_t pdev, Scsi_Cmnd cmd)((Scsi_Cmnd cmd)->use_sg)
1163	{
1164	int use_sg;
1165	int dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
1166
1167	if (cmd->use_sg == 0)
1168	return 0;
1169
1170	use_sg = pci_map_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
1171	cmd->__data_mapped = 2;
1172	cmd->__data_mapping = use_sg;
1173
1174	return use_sg;
1175	}
1176
1177	static void __sync_scsi_data(pcidev_t pdev, Scsi_Cmnd *cmd)do {; } while (0)
1178	{
1179	int dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
1180
1181	switch(cmd->__data_mapped) {
1182	case 2:
1183	pci_dma_sync_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
1184	break;
1185	case 1:
1186	pci_dma_sync_single(pdev, cmd->__data_mapping,
1187	cmd->request_bufflen, dma_dir);
1188	break;
1189	}
1190	}
1191
1192	#define scsi_sg_dma_address(sc)virt_to_phys((sc)->address) sg_dma_address(sc)
1193	#define scsi_sg_dma_len(sc)((sc)->length) sg_dma_len(sc)
1194
1195	#endif /* SCSI_NCR_DYNAMIC_DMA_MAPPING */
1196
1197	#define unmap_scsi_data(np, cmd)do {; } while (0) __unmap_scsi_data(np->pdev, cmd)do {; } while (0)
1198	#define map_scsi_single_data(np, cmd)(virt_to_phys((cmd)->request_buffer)) __map_scsi_single_data(np->pdev, cmd)(virt_to_phys((cmd)->request_buffer))
1199	#define map_scsi_sg_data(np, cmd)((cmd)->use_sg) __map_scsi_sg_data(np->pdev, cmd)((cmd)->use_sg)
1200	#define sync_scsi_data(np, cmd)do {; } while (0) __sync_scsi_data(np->pdev, cmd)do {; } while (0)
1201
1202
1203	/*
1204	* Print out some buffer.
1205	*/
1206	static void ncr_print_hex(u_charunsigned char *p, int n)
1207	{
1208	while (n-- > 0)
1209	printk (" %x", *p++);
1210	}
1211
1212	static void ncr_printl_hex(char label, u_charunsigned char p, int n)
1213	{
1214	printk("%s", label);
1215	ncr_print_hex(p, n);
1216	printk (".\n");
1217	}
1218
1219	/*
1220	** Transfer direction
1221	**
1222	** Until some linux kernel version near 2.3.40, low-level scsi
1223	** drivers were not told about data transfer direction.
1224	** We check the existence of this feature that has been expected
1225	** for a _long_ time by all SCSI driver developers by just
1226	** testing against the definition of SCSI_DATA_UNKNOWN. Indeed
1227	** this is a hack, but testing against a kernel version would
1228	** have been a shame. ;-)
1229	*/
1230	#ifdef SCSI_DATA_UNKNOWN0
1231
1232	#define scsi_data_direction(cmd) (cmd->sc_data_direction)
1233
1234	#else
1235
1236	#define SCSI_DATA_UNKNOWN0 0
1237	#define SCSI_DATA_WRITE1 1
1238	#define SCSI_DATA_READ2 2
1239	#define SCSI_DATA_NONE3 3
1240
1241	static __inline____inline__ __attribute__((always_inline)) int scsi_data_direction(Scsi_Cmnd *cmd)
1242	{
1243	int direction;
1244
1245	switch((int) cmd->cmnd[0]) {
1246	case 0x08: /* READ(6) 08 */
1247	case 0x28: /* READ(10) 28 */
1248	case 0xA8: /* READ(12) A8 */
1249	direction = SCSI_DATA_READ2;
1250	break;
1251	case 0x0A: /* WRITE(6) 0A */
1252	case 0x2A: /* WRITE(10) 2A */
1253	case 0xAA: /* WRITE(12) AA */
1254	direction = SCSI_DATA_WRITE1;
1255	break;
1256	default:
1257	direction = SCSI_DATA_UNKNOWN0;
1258	break;
1259	}
1260
1261	return direction;
1262	}
1263
1264	#endif /* SCSI_DATA_UNKNOWN */
1265
1266	/*
1267	** Head of list of NCR boards
1268	**
1269	** For kernel version < 1.3.70, host is retrieved by its irq level.
1270	** For later kernels, the internal host control block address
1271	** (struct ncb) is used as device id parameter of the irq stuff.
1272	*/
1273
1274	static struct Scsi_Host first_host = NULL((void ) 0);
1275
1276
1277	/*
1278	** /proc directory entry and proc_info function
1279	*/
1280	#ifdef SCSI_NCR_PROC_INFO_SUPPORT
1281	#if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,3,27)(((2)<<16)+((3)<<8)+(27))
1282	static struct proc_dir_entry proc_scsi_sym53c8xx = {
1283	PROC_SCSI_SYM53C8XX, 9, NAME53C8XX"sym53c8xx",
1284	S_IFDIR0040000 \| S_IRUGO(00400\|00040\|00004) \| S_IXUGO(00100\|00010\|00001), 2
1285	};
1286	#endif
1287	static int sym53c8xx_proc_info(char buffer, char *start, off_t offset,
1288	int length, int hostno, int func);
1289	#endif
1290
1291	/*
1292	** Driver setup.
1293	**
1294	** This structure is initialized from linux config options.
1295	** It can be overridden at boot-up by the boot command line.
1296	*/
1297	static struct ncr_driver_setup
1298	driver_setup = SCSI_NCR_DRIVER_SETUP{ (1), (1), (1), (3), (3), (0), 0, 0, 1, 0, (0), (250/((20))) , 0x00, 7, (0), 1, (2), (0), 0, 1, 0, 0, 255, 0x00 };
1299
1300	#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
1301	static struct ncr_driver_setup
1302	driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP{ 0, 1, 0, 0, 0, 0, 0, 0, 1, 2, 0, 255, 0x00, 255, 0, 0, 10, 1 , 1, 1, 0, 0, 255 };
1303	# ifdef MODULE
1304	char sym53c8xx = 0; / command line passed by insmod */
1305	# if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,30)(((2)<<16)+((1)<<8)+(30))
1306	MODULE_PARM(sym53c8xx, "s");
1307	# endif
1308	# endif
1309	#endif
1310
1311	/*
1312	** Other Linux definitions
1313	*/
1314	#define SetScsiResult(cmd, h_sts, s_sts)cmd->result = (((h_sts) << 16) + ((s_sts) & 0x7f )) \
1315	cmd->result = (((h_sts) << 16) + ((s_sts) & 0x7f))
1316
1317	/* We may have to remind our amnesiac SCSI layer of the reason of the abort */
1318	#if 0
1319	#define SetScsiAbortResult(cmd)cmd->result = (((0x05) << 16) + ((0xff) & 0x7f)) \
1320	SetScsiResult( \cmd->result = ((((cmd)->abort_reason == 0x03 ? 0x03 : 0x05 ) << 16) + ((0xff) & 0x7f))
1321	cmd, \cmd->result = ((((cmd)->abort_reason == 0x03 ? 0x03 : 0x05 ) << 16) + ((0xff) & 0x7f))
1322	(cmd)->abort_reason == DID_TIME_OUT ? DID_TIME_OUT : DID_ABORT, \cmd->result = ((((cmd)->abort_reason == 0x03 ? 0x03 : 0x05 ) << 16) + ((0xff) & 0x7f))
1323	0xff)cmd->result = ((((cmd)->abort_reason == 0x03 ? 0x03 : 0x05 ) << 16) + ((0xff) & 0x7f))
1324	#else
1325	#define SetScsiAbortResult(cmd)cmd->result = (((0x05) << 16) + ((0xff) & 0x7f)) SetScsiResult(cmd, DID_ABORT, 0xff)cmd->result = (((0x05) << 16) + ((0xff) & 0x7f))
1326	#endif
1327
1328	static void sym53c8xx_select_queue_depths(
1329	struct Scsi_Host host, struct scsi_device devlist);
1330	static void sym53c8xx_intr(int irq, void dev_id, struct pt_regs regs);
1331	static void sym53c8xx_timeout(unsigned long np);
1332
1333	#define initverbose(driver_setup.verbose) (driver_setup.verbose)
1334	#define bootverbose(np->verbose) (np->verbose)
1335
1336	#ifdef SCSI_NCR_NVRAM_SUPPORT
1337	static u_charunsigned char Tekram_sync[16] __initdata =
1338	{25,31,37,43, 50,62,75,125, 12,15,18,21, 6,7,9,10};
1339	#endif /* SCSI_NCR_NVRAM_SUPPORT */
1340
1341	/*
1342	** Structures used by sym53c8xx_detect/sym53c8xx_pci_init to
1343	** transmit device configuration to the ncr_attach() function.
1344	*/
1345	typedef struct {
1346	int bus;
1347	u_charunsigned char device_fn;
1348	u_longunsigned long base;
1349	u_longunsigned long base_2;
1350	u_longunsigned long io_port;
1351	int irq;
1352	/* port and reg fields to use INB, OUTB macros */
1353	u_longunsigned long base_io;
1354	volatile struct ncr_reg *reg;
1355	} ncr_slot;
1356
1357	typedef struct {
1358	int type;
1359	#define SCSI_NCR_SYMBIOS_NVRAM(1) (1)
1360	#define SCSI_NCR_TEKRAM_NVRAM(2) (2)
1361	#ifdef SCSI_NCR_NVRAM_SUPPORT
1362	union {
1363	Symbios_nvram Symbios;
1364	Tekram_nvram Tekram;
1365	} data;
1366	#endif
1367	} ncr_nvram;
1368
1369	/*
1370	** Structure used by sym53c8xx_detect/sym53c8xx_pci_init
1371	** to save data on each detected board for ncr_attach().
1372	*/
1373	typedef struct {
1374	pcidev_t pdev;
1375	ncr_slot slot;
1376	ncr_chip chip;
1377	ncr_nvram *nvram;
1378	u_charunsigned char host_id;
1379	#ifdef SCSI_NCR_PQS_PDS_SUPPORT
1380	u_charunsigned char pqs_pds;
1381	#endif
1382	int attach_done;
1383	} ncr_device;
1384
1385	/*==========================================================
1386	**
1387	** assert ()
1388	**
1389	**==========================================================
1390	**
1391	** modified copy from 386bsd:/usr/include/sys/assert.h
1392	**
1393	**----------------------------------------------------------
1394	*/
1395
1396	#define assert(expression){ if (!(expression)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "expression", "../linux/src/drivers/scsi/sym53c8xx.c", 1396 ); } } { \
1397	if (!(expression)) { \
1398	(void)panic( \
1399	"assertion \"%s\" failed: file \"%s\", line %d\n", \
1400	#expression, \
1401	__FILE__"../linux/src/drivers/scsi/sym53c8xx.c", __LINE__1401); \
1402	} \
1403	}
1404
1405	/*==========================================================
1406	**
1407	** Command control block states.
1408	**
1409	**==========================================================
1410	*/
1411
1412	#define HS_IDLE(0) (0)
1413	#define HS_BUSY(1) (1)
1414	#define HS_NEGOTIATE(2) (2) /* sync/wide data transfer*/
1415	#define HS_DISCONNECT(3) (3) /* Disconnected by target */
1416
1417	#define HS_DONEMASK(0x80) (0x80)
1418	#define HS_COMPLETE(4\|(0x80)) (4\|HS_DONEMASK(0x80))
1419	#define HS_SEL_TIMEOUT(5\|(0x80)) (5\|HS_DONEMASK(0x80)) /* Selection timeout */
1420	#define HS_RESET(6\|(0x80)) (6\|HS_DONEMASK(0x80)) /* SCSI reset */
1421	#define HS_ABORTED(7\|(0x80)) (7\|HS_DONEMASK(0x80)) /* Transfer aborted */
1422	#define HS_TIMEOUT(8\|(0x80)) (8\|HS_DONEMASK(0x80)) /* Software timeout */
1423	#define HS_FAIL(9\|(0x80)) (9\|HS_DONEMASK(0x80)) /* SCSI or PCI bus errors */
1424	#define HS_UNEXPECTED(10\|(0x80)) (10\|HS_DONEMASK(0x80))/* Unexpected disconnect */
1425
1426	#define DSA_INVALID0xffffffff 0xffffffff
1427
1428	/*==========================================================
1429	**
1430	** Software Interrupt Codes
1431	**
1432	**==========================================================
1433	*/
1434
1435	#define SIR_BAD_STATUS(1) (1)
1436	#define SIR_SEL_ATN_NO_MSG_OUT(2) (2)
1437	#define SIR_MSG_RECEIVED(3) (3)
1438	#define SIR_MSG_WEIRD(4) (4)
1439	#define SIR_NEGO_FAILED(5) (5)
1440	#define SIR_NEGO_PROTO(6) (6)
1441	#define SIR_SCRIPT_STOPPED(7) (7)
1442	#define SIR_REJECT_TO_SEND(8) (8)
1443	#define SIR_SWIDE_OVERRUN(9) (9)
1444	#define SIR_SODL_UNDERRUN(10) (10)
1445	#define SIR_RESEL_NO_MSG_IN(11) (11)
1446	#define SIR_RESEL_NO_IDENTIFY(12) (12)
1447	#define SIR_RESEL_BAD_LUN(13) (13)
1448	#define SIR_TARGET_SELECTED(14) (14)
1449	#define SIR_RESEL_BAD_I_T_L(15) (15)
1450	#define SIR_RESEL_BAD_I_T_L_Q(16) (16)
1451	#define SIR_ABORT_SENT(17) (17)
1452	#define SIR_RESEL_ABORTED(18) (18)
1453	#define SIR_MSG_OUT_DONE(19) (19)
1454	#define SIR_AUTO_SENSE_DONE(20) (20)
1455	#define SIR_DUMMY_INTERRUPT(21) (21)
1456	#define SIR_DATA_OVERRUN(22) (22)
1457	#define SIR_BAD_PHASE(23) (23)
1458	#define SIR_MAX(23) (23)
1459
1460	/*==========================================================
1461	**
1462	** Extended error bits.
1463	** xerr_status field of struct ccb.
1464	**
1465	**==========================================================
1466	*/
1467
1468	#define XE_EXTRA_DATA(1) (1) /* unexpected data phase */
1469	#define XE_BAD_PHASE(2) (2) /* illegal phase (4/5) */
1470	#define XE_PARITY_ERR(4) (4) /* unrecovered SCSI parity error */
1471	#define XE_SODL_UNRUN(1<<3) (1<<3)
1472	#define XE_SWIDE_OVRUN(1<<4) (1<<4)
1473
1474	/*==========================================================
1475	**
1476	** Negotiation status.
1477	** nego_status field of struct ccb.
1478	**
1479	**==========================================================
1480	*/
1481
1482	#define NS_NOCHANGE(0) (0)
1483	#define NS_SYNC(1) (1)
1484	#define NS_WIDE(2) (2)
1485	#define NS_PPR(4) (4)
1486
1487	/*==========================================================
1488	**
1489	** "Special features" of targets.
1490	** quirks field of struct tcb.
1491	** actualquirks field of struct ccb.
1492	**
1493	**==========================================================
1494	*/
1495
1496	#define QUIRK_AUTOSAVE(0x01) (0x01)
1497
1498	/*==========================================================
1499	**
1500	** Capability bits in Inquire response byte 7.
1501	**
1502	**==========================================================
1503	*/
1504
1505	#define INQ7_QUEUE(0x02) (0x02)
1506	#define INQ7_SYNC(0x10) (0x10)
1507	#define INQ7_WIDE16(0x20) (0x20)
1508
1509	/*==========================================================
1510	**
1511	** A CCB hashed table is used to retrieve CCB address
1512	** from DSA value.
1513	**
1514	**==========================================================
1515	*/
1516
1517	#define CCB_HASH_SHIFT8 8
1518	#define CCB_HASH_SIZE(1UL << 8) (1UL << CCB_HASH_SHIFT8)
1519	#define CCB_HASH_MASK((1UL << 8)-1) (CCB_HASH_SIZE(1UL << 8)-1)
1520	#define CCB_HASH_CODE(dsa)(((dsa) >> 11) & ((1UL << 8)-1)) (((dsa) >> 11) & CCB_HASH_MASK((1UL << 8)-1))
1521
1522	/*==========================================================
1523	**
1524	** Declaration of structs.
1525	**
1526	**==========================================================
1527	*/
1528
1529	struct tcb;
1530	struct lcb;
1531	struct ccb;
1532	struct ncb;
1533	struct script;
1534
1535	typedef struct ncb * ncb_p;
1536	typedef struct tcb * tcb_p;
1537	typedef struct lcb * lcb_p;
1538	typedef struct ccb * ccb_p;
1539
1540	struct link {
1541	ncrcmd l_cmd;
1542	ncrcmd l_paddr;
1543	};
1544
1545	struct usrcmd {
1546	u_longunsigned long target;
1547	u_longunsigned long lun;
1548	u_longunsigned long data;
1549	u_longunsigned long cmd;
1550	};
1551
1552	#define UC_SETSYNC10 10
1553	#define UC_SETTAGS11 11
1554	#define UC_SETDEBUG12 12
1555	#define UC_SETORDER13 13
1556	#define UC_SETWIDE14 14
1557	#define UC_SETFLAG15 15
1558	#define UC_SETVERBOSE17 17
1559	#define UC_RESETDEV18 18
1560	#define UC_CLEARDEV19 19
1561
1562	#define UF_TRACE(0x01) (0x01)
1563	#define UF_NODISC(0x02) (0x02)
1564	#define UF_NOSCAN(0x04) (0x04)
1565
1566	/*========================================================================
1567	**
1568	** Declaration of structs: target control block
1569	**
1570	**========================================================================
1571	*/
1572	struct tcb {
1573	/*----------------------------------------------------------------
1574	** LUN tables.
1575	** An array of bus addresses is used on reselection by
1576	** the SCRIPT.
1577	**----------------------------------------------------------------
1578	*/
1579	u_int32 luntbl; / lcbs bus address table */
1580	u_int32 b_luntbl; /* bus address of this table */
1581	u_int32 b_lun0; /* bus address of lun0 */
1582	lcb_p l0p; /* lcb of LUN #0 (normal case) */
1583	#if MAX_LUN64 > 1
1584	lcb_p lmp; / Other lcb's [1..MAX_LUN] */
1585	#endif
1586	/*----------------------------------------------------------------
1587	** Target capabilities.
1588	**----------------------------------------------------------------
1589	*/
1590	u_charunsigned char inq_done; /* Target capabilities received */
1591	u_charunsigned char inq_byte7; /* Contains these capabilities */
1592
1593	/*----------------------------------------------------------------
1594	** Some flags.
1595	**----------------------------------------------------------------
1596	*/
1597	u_charunsigned char to_reset; /* This target is to be reset */
1598
1599	/*----------------------------------------------------------------
1600	** Pointer to the ccb used for negotiation.
1601	** Prevent from starting a negotiation for all queued commands
1602	** when tagged command queuing is enabled.
1603	**----------------------------------------------------------------
1604	*/
1605	ccb_p nego_cp;
1606
1607	/*----------------------------------------------------------------
1608	** negotiation of wide and synch transfer and device quirks.
1609	** sval, wval and uval are read from SCRIPTS and so have alignment
1610	** constraints.
1611	**----------------------------------------------------------------
1612	*/
1613	/0/ u_charunsigned char minsync;
1614	/1/ u_charunsigned char sval;
1615	/2/ u_shortunsigned short period;
1616	/0/ u_charunsigned char maxoffs;
1617	/1/ u_charunsigned char quirks;
1618	/2/ u_charunsigned char widedone;
1619	/3/ u_charunsigned char wval;
1620	/0/ u_charunsigned char uval;
1621
1622	#ifdef SCSI_NCR_INTEGRITY_CHECKING
1623	u_charunsigned char ic_min_sync;
1624	u_charunsigned char ic_max_width;
1625	u_charunsigned char ic_done;
1626	#endif
1627	u_charunsigned char ic_maximums_set;
1628	u_charunsigned char ppr_negotiation;
1629
1630	/*----------------------------------------------------------------
1631	** User settable limits and options.
1632	** These limits are read from the NVRAM if present.
1633	**----------------------------------------------------------------
1634	*/
1635	u_charunsigned char usrsync;
1636	u_charunsigned char usrwide;
1637	u_shortunsigned short usrtags;
1638	u_charunsigned char usrflag;
1639	};
1640
1641	/*========================================================================
1642	**
1643	** Declaration of structs: lun control block
1644	**
1645	**========================================================================
1646	*/
1647	struct lcb {
1648	/*----------------------------------------------------------------
1649	** On reselection, SCRIPTS use this value as a JUMP address
1650	** after the IDENTIFY has been successfully received.
1651	** This field is set to 'resel_tag' if TCQ is enabled and
1652	** to 'resel_notag' if TCQ is disabled.
1653	** (Must be at zero due to bad lun handling on reselection)
1654	**----------------------------------------------------------------
1655	*/
1656	/0/ u_int32 resel_task;
1657
1658	/*----------------------------------------------------------------
1659	** Task table used by the script processor to retrieve the
1660	** task corresponding to a reselected nexus. The TAG is used
1661	** as offset to determine the corresponding entry.
1662	** Each entry contains the associated CCB bus address.
1663	**----------------------------------------------------------------
1664	*/
1665	u_int32 tasktbl_0; /* Used if TCQ not enabled */
1666	u_int32 *tasktbl;
1667	u_int32 b_tasktbl;
1668
1669	/*----------------------------------------------------------------
1670	** CCB queue management.
1671	**----------------------------------------------------------------
1672	*/
1673	XPT_QUEHEAD busy_ccbq; /* Queue of busy CCBs */
1674	XPT_QUEHEAD wait_ccbq; /* Queue of waiting for IO CCBs */
1675	u_shortunsigned short busyccbs; /* CCBs busy for this lun */
1676	u_shortunsigned short queuedccbs; /* CCBs queued to the controller*/
1677	u_shortunsigned short queuedepth; /* Queue depth for this lun */
1678	u_shortunsigned short scdev_depth; /* SCSI device queue depth */
1679	u_shortunsigned short maxnxs; /* Max possible nexuses */
1680
1681	/*----------------------------------------------------------------
1682	** Control of tagged command queuing.
1683	** Tags allocation is performed using a circular buffer.
1684	** This avoids using a loop for tag allocation.
1685	**----------------------------------------------------------------
1686	*/
1687	u_shortunsigned short ia_tag; /* Tag allocation index */
1688	u_shortunsigned short if_tag; /* Tag release index */
1689	u_charunsigned char cb_tags; / Circular tags buffer */
1690	u_charunsigned char inq_byte7; /* Store unit CmdQ capability */
1691	u_charunsigned char usetags; /* Command queuing is active */
1692	u_charunsigned char to_clear; /* User wants to clear all tasks*/
1693	u_shortunsigned short maxtags; /* Max NR of tags asked by user */
1694	u_shortunsigned short numtags; /* Current number of tags */
1695
1696	/*----------------------------------------------------------------
1697	** QUEUE FULL and ORDERED tag control.
1698	**----------------------------------------------------------------
1699	*/
1700	u_shortunsigned short num_good; /* Nr of GOOD since QUEUE FULL */
1701	u_shortunsigned short tags_sum[2]; /* Tags sum counters */
1702	u_charunsigned char tags_si; /* Current index to tags sum */
1703	u_longunsigned long tags_stime; /* Last time we switch tags_sum */
1704	};
1705
1706	/*========================================================================
1707	**
1708	** Declaration of structs: actions for a task.
1709	**
1710	**========================================================================
1711	**
1712	** It is part of the CCB and is called by the scripts processor to
1713	** start or restart the data structure (nexus).
1714	**
1715	**------------------------------------------------------------------------
1716	*/
1717	struct action {
1718	u_int32 start;
1719	u_int32 restart;
1720	};
1721
1722	/*========================================================================
1723	**
1724	** Declaration of structs: Phase mismatch context.
1725	**
1726	**========================================================================
1727	**
1728	** It is part of the CCB and is used as parameters for the DATA
1729	** pointer. We need two contexts to handle correctly the SAVED
1730	** DATA POINTER.
1731	**
1732	**------------------------------------------------------------------------
1733	*/
1734	struct pm_ctx {
1735	struct scr_tblmove sg; /* Updated interrupted SG block */
1736	u_int32 ret; /* SCRIPT return address */
1737	};
1738
1739	/*========================================================================
1740	**
1741	** Declaration of structs: global HEADER.
1742	**
1743	**========================================================================
1744	**
1745	** In earlier driver versions, this substructure was copied from the
1746	** ccb to a global address after selection (or reselection) and copied
1747	** back before disconnect. Since we are now using LOAD/STORE DSA
1748	** RELATIVE instructions, the script is able to access directly these
1749	** fields, and so, this header is no more copied.
1750	**
1751	**------------------------------------------------------------------------
1752	*/
1753
1754	struct head {
1755	/*----------------------------------------------------------------
1756	** Start and restart SCRIPTS addresses (must be at 0).
1757	**----------------------------------------------------------------
1758	*/
1759	struct action go;
1760
1761	/*----------------------------------------------------------------
1762	** Saved data pointer.
1763	** Points to the position in the script responsible for the
1764	** actual transfer of data.
1765	** It's written after reception of a SAVE_DATA_POINTER message.
1766	** The goalpointer points after the last transfer command.
1767	**----------------------------------------------------------------
1768	*/
1769	u_int32 savep;
1770	u_int32 lastp;
1771	u_int32 goalp;
1772
1773	/*----------------------------------------------------------------
1774	** Alternate data pointer.
1775	** They are copied back to savep/lastp/goalp by the SCRIPTS
1776	** when the direction is unknown and the device claims data out.
1777	**----------------------------------------------------------------
1778	*/
1779	u_int32 wlastp;
1780	u_int32 wgoalp;
1781
1782	/*----------------------------------------------------------------
1783	** Status fields.
1784	**----------------------------------------------------------------
1785	*/
1786	u_charunsigned char status[4]; /* host status */
1787	};
1788
1789	/*
1790	** LUN control block lookup.
1791	** We use a direct pointer for LUN #0, and a table of pointers
1792	** which is only allocated for devices that support LUN(s) > 0.
1793	*/
1794	#if MAX_LUN64 <= 1
1795	#define ncr_lp(np, tp, lun)(!lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(lun)] : 0 (!lun) ? (tp)->l0p : 0
1796	#else
1797	#define ncr_lp(np, tp, lun)(!lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(lun)] : 0 \
1798	(!lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(lun)] : 0
1799	#endif
1800
1801	/*
1802	** The status bytes are used by the host and the script processor.
1803	**
1804	** The four bytes (status[4]) are copied to the scratchb register
1805	** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect,
1806	** and copied back just after disconnecting.
1807	** Inside the script the XX_REG are used.
1808	*/
1809
1810	/*
1811	** Last four bytes (script)
1812	*/
1813	#define QU_REGscr0 scr0
1814	#define HS_REGscr1 scr1
1815	#define HS_PRTnc_scr1 nc_scr1
1816	#define SS_REGscr2 scr2
1817	#define SS_PRTnc_scr2 nc_scr2
1818	#define HF_REGscr3 scr3
1819	#define HF_PRTnc_scr3 nc_scr3
1820
1821	/*
1822	** Last four bytes (host)
1823	*/
1824	#define actualquirksphys.header.status[0] phys.header.status[0]
1825	#define host_statusphys.header.status[1] phys.header.status[1]
1826	#define scsi_statusphys.header.status[2] phys.header.status[2]
1827	#define host_flagsphys.header.status[3] phys.header.status[3]
1828
1829	/*
1830	** Host flags
1831	*/
1832	#define HF_IN_PM01u 1u
1833	#define HF_IN_PM1(1u<<1) (1u<<1)
1834	#define HF_ACT_PM(1u<<2) (1u<<2)
1835	#define HF_DP_SAVED(1u<<3) (1u<<3)
1836	#define HF_AUTO_SENSE(1u<<4) (1u<<4)
1837	#define HF_DATA_IN(1u<<5) (1u<<5)
1838	#define HF_PM_TO_C(1u<<6) (1u<<6)
1839	#define HF_EXT_ERR(1u<<7) (1u<<7)
1840
1841	#ifdef SCSI_NCR_IARB_SUPPORT
1842	#define HF_HINT_IARB (1u<<7)
1843	#endif
1844
1845	/*
1846	** This one is stolen from QU_REG.:)
1847	*/
1848	#define HF_DATA_ST(1u<<7) (1u<<7)
1849
1850	/*==========================================================
1851	**
1852	** Declaration of structs: Data structure block
1853	**
1854	**==========================================================
1855	**
1856	** During execution of a ccb by the script processor,
1857	** the DSA (data structure address) register points
1858	** to this substructure of the ccb.
1859	** This substructure contains the header with
1860	** the script-processor-changable data and
1861	** data blocks for the indirect move commands.
1862	**
1863	**----------------------------------------------------------
1864	*/
1865
1866	struct dsb {
1867
1868	/*
1869	** Header.
1870	*/
1871
1872	struct head header;
1873
1874	/*
1875	** Table data for Script
1876	*/
1877
1878	struct scr_tblsel select;
1879	struct scr_tblmove smsg ;
1880	struct scr_tblmove smsg_ext ;
1881	struct scr_tblmove cmd ;
1882	struct scr_tblmove sense ;
1883	struct scr_tblmove wresid;
1884	struct scr_tblmove data [MAX_SCATTER((127))];
1885
1886	/*
1887	** Phase mismatch contexts.
1888	** We need two to handle correctly the
1889	** SAVED DATA POINTER.
1890	*/
1891
1892	struct pm_ctx pm0;
1893	struct pm_ctx pm1;
1894	};
1895
1896
1897	/*========================================================================
1898	**
1899	** Declaration of structs: Command control block.
1900	**
1901	**========================================================================
1902	*/
1903	struct ccb {
1904	/*----------------------------------------------------------------
1905	** This is the data structure which is pointed by the DSA
1906	** register when it is executed by the script processor.
1907	** It must be the first entry.
1908	**----------------------------------------------------------------
1909	*/
1910	struct dsb phys;
1911
1912	/*----------------------------------------------------------------
1913	** The general SCSI driver provides a
1914	** pointer to a control block.
1915	**----------------------------------------------------------------
1916	*/
1917	Scsi_Cmnd cmd; / SCSI command */
1918	u_charunsigned char cdb_buf[16]; /* Copy of CDB */
1919	u_charunsigned char sense_buf[64];
1920	int data_len; /* Total data length */
1921	int segments; /* Number of SG segments */
1922
1923	/*----------------------------------------------------------------
1924	** Message areas.
1925	** We prepare a message to be sent after selection.
1926	** We may use a second one if the command is rescheduled
1927	** due to CHECK_CONDITION or QUEUE FULL status.
1928	** Contents are IDENTIFY and SIMPLE_TAG.
1929	** While negotiating sync or wide transfer,
1930	** a SDTR or WDTR message is appended.
1931	**----------------------------------------------------------------
1932	*/
1933	u_charunsigned char scsi_smsg [12];
1934	u_charunsigned char scsi_smsg2[12];
1935
1936	/*----------------------------------------------------------------
1937	** Miscellaneous status'.
1938	**----------------------------------------------------------------
1939	*/
1940	u_charunsigned char nego_status; /* Negotiation status */
1941	u_charunsigned char xerr_status; /* Extended error flags */
1942	u_int32 extra_bytes; /* Extraneous bytes transferred */
1943
1944	/*----------------------------------------------------------------
1945	** Saved info for auto-sense
1946	**----------------------------------------------------------------
1947	*/
1948	u_charunsigned char sv_scsi_status;
1949	u_charunsigned char sv_xerr_status;
1950
1951	/*----------------------------------------------------------------
1952	** Other fields.
1953	**----------------------------------------------------------------
1954	*/
1955	u_longunsigned long p_ccb; /* BUS address of this CCB */
1956	u_charunsigned char sensecmd[6]; /* Sense command */
1957	u_charunsigned char to_abort; /* This CCB is to be aborted */
1958	u_shortunsigned short tag; /* Tag for this transfer */
1959	/* NO_TAG means no tag */
1960	u_charunsigned char tags_si; /* Lun tags sum index (0,1) */
1961
1962	u_charunsigned char target;
1963	u_charunsigned char lun;
1964	u_shortunsigned short queued;
1965	ccb_p link_ccb; /* Host adapter CCB chain */
1966	ccb_p link_ccbh; /* Host adapter CCB hash chain */
1967	XPT_QUEHEAD link_ccbq; /* Link to unit CCB queue */
1968	u_int32 startp; /* Initial data pointer */
1969	u_int32 lastp0; /* Initial 'lastp' */
1970	int ext_sg; /* Extreme data pointer, used */
1971	int ext_ofs; /* to calculate the residual. */
1972	int resid;
1973	};
1974
1975	#define CCB_PHYS(cp,lbl)(cp->p_ccb + ((size_t) (&((struct ccb )0)->lbl))) (cp->p_ccb + offsetof(struct ccb, lbl)((size_t) (&((struct ccb )0)->lbl)))
1976
1977
1978	/*========================================================================
1979	**
1980	** Declaration of structs: NCR device descriptor
1981	**
1982	**========================================================================
1983	*/
1984	struct ncb {
1985	/*----------------------------------------------------------------
1986	** Idle task and invalid task actions and their bus
1987	** addresses.
1988	**----------------------------------------------------------------
1989	*/
1990	struct action idletask;
1991	struct action notask;
1992	struct action bad_i_t_l;
1993	struct action bad_i_t_l_q;
1994	u_longunsigned long p_idletask;
1995	u_longunsigned long p_notask;
1996	u_longunsigned long p_bad_i_t_l;
1997	u_longunsigned long p_bad_i_t_l_q;
1998
1999	/*----------------------------------------------------------------
2000	** Dummy lun table to protect us against target returning bad
2001	** lun number on reselection.
2002	**----------------------------------------------------------------
2003	*/
2004	u_int32 badluntbl; / Table physical address */
2005	u_int32 resel_badlun; /* SCRIPT handler BUS address */
2006
2007	/*----------------------------------------------------------------
2008	** Bit 32-63 of the on-chip RAM bus address in LE format.
2009	** The START_RAM64 script loads the MMRS and MMWS from this
2010	** field.
2011	**----------------------------------------------------------------
2012	*/
2013	u_int32 scr_ram_seg;
2014
2015	/*----------------------------------------------------------------
2016	** CCBs management queues.
2017	**----------------------------------------------------------------
2018	*/
2019	Scsi_Cmnd waiting_list; / Commands waiting for a CCB */
2020	/* when lcb is not allocated. */
2021	Scsi_Cmnd done_list; / Commands waiting for done() */
2022	/* callback to be invoked. */
2023	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,1,93)(((2)<<16)+((1)<<8)+(93))
2024	spinlock_t smp_lock; /* Lock for SMP threading */
2025	#endif
2026
2027	/*----------------------------------------------------------------
2028	** Chip and controller indentification.
2029	**----------------------------------------------------------------
2030	*/
2031	int unit; /* Unit number */
2032	char chip_name[8]; /* Chip name */
2033	char inst_name[16]; /* ncb instance name */
2034
2035	/*----------------------------------------------------------------
2036	** Initial value of some IO register bits.
2037	** These values are assumed to have been set by BIOS, and may
2038	** be used for probing adapter implementation differences.
2039	**----------------------------------------------------------------
2040	*/
2041	u_charunsigned char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest3, sv_ctest4,
2042	sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4, sv_stest1, sv_scntl4;
2043
2044	/*----------------------------------------------------------------
2045	** Actual initial value of IO register bits used by the
2046	** driver. They are loaded at initialisation according to
2047	** features that are to be enabled.
2048	**----------------------------------------------------------------
2049	*/
2050	u_charunsigned char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest3, rv_ctest4,
2051	rv_ctest5, rv_stest2, rv_ccntl0, rv_ccntl1, rv_scntl4;
2052
2053	/*----------------------------------------------------------------
2054	** Target data.
2055	** Target control block bus address array used by the SCRIPT
2056	** on reselection.
2057	**----------------------------------------------------------------
2058	*/
2059	struct tcb target[MAX_TARGET((16))];
2060	u_int32 *targtbl;
2061
2062	/*----------------------------------------------------------------
2063	** Virtual and physical bus addresses of the chip.
2064	**----------------------------------------------------------------
2065	*/
2066	#ifndef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
2067	u_longunsigned long base_va; /* MMIO base virtual address */
2068	u_longunsigned long base2_va; /* On-chip RAM virtual address */
2069	#endif
2070	u_longunsigned long base_ba; /* MMIO base bus address */
2071	u_longunsigned long base_io; /* IO space base address */
2072	u_longunsigned long base_ws; /* (MM)IO window size */
2073	u_longunsigned long base2_ba; /* On-chip RAM bus address */
2074	u_longunsigned long base2_ws; /* On-chip RAM window size */
2075	u_intunsigned int irq; /* IRQ number */
2076	volatile /* Pointer to volatile for */
2077	struct ncr_reg reg; / memory mapped IO. */
2078
2079	/*----------------------------------------------------------------
2080	** SCRIPTS virtual and physical bus addresses.
2081	** 'script' is loaded in the on-chip RAM if present.
2082	** 'scripth' stays in main memory for all chips except the
2083	** 53C895A and 53C896 that provide 8K on-chip RAM.
2084	**----------------------------------------------------------------
2085	*/
2086	struct script script0; / Copies of script and scripth */
2087	struct scripth scripth0; / relocated for this ncb. */
2088	u_longunsigned long p_script; /* Actual script and scripth */
2089	u_longunsigned long p_scripth; /* bus addresses. */
2090	u_longunsigned long p_scripth0;
2091
2092	/*----------------------------------------------------------------
2093	** General controller parameters and configuration.
2094	**----------------------------------------------------------------
2095	*/
2096	pcidev_t pdev;
2097	u_shortunsigned short device_id; /* PCI device id */
2098	u_charunsigned char revision_id; /* PCI device revision id */
2099	u_charunsigned char bus; /* PCI BUS number */
2100	u_charunsigned char device_fn; /* PCI BUS device and function */
2101	u_charunsigned char myaddr; /* SCSI id of the adapter */
2102	u_charunsigned char maxburst; /* log base 2 of dwords burst */
2103	u_charunsigned char maxwide; /* Maximum transfer width */
2104	u_charunsigned char minsync; /* Minimum sync period factor */
2105	u_charunsigned char maxsync; /* Maximum sync period factor */
2106	u_charunsigned char maxoffs; /* Max scsi offset */
2107	u_charunsigned char multiplier; /* Clock multiplier (1,2,4) */
2108	u_charunsigned char clock_divn; /* Number of clock divisors */
2109	u_longunsigned long clock_khz; /* SCSI clock frequency in KHz */
2110	u_intunsigned int features; /* Chip features map */
2111
2112	/*----------------------------------------------------------------
2113	** Range for the PCI clock frequency measurement result
2114	** that ensures the algorithm used by the driver can be
2115	** trusted for the SCSI clock frequency measurement.
2116	** (Assuming a PCI clock frequency of 33 MHz).
2117	**----------------------------------------------------------------
2118	*/
2119	u_intunsigned int pciclock_min;
2120	u_intunsigned int pciclock_max;
2121
2122	/*----------------------------------------------------------------
2123	** Start queue management.
2124	** It is filled up by the host processor and accessed by the
2125	** SCRIPTS processor in order to start SCSI commands.
2126	**----------------------------------------------------------------
2127	*/
2128	u_longunsigned long p_squeue; /* Start queue BUS address */
2129	u_int32 squeue; / Start queue virtual address */
2130	u_shortunsigned short squeueput; /* Next free slot of the queue */
2131	u_shortunsigned short actccbs; /* Number of allocated CCBs */
2132	u_shortunsigned short queuedepth; /* Start queue depth */
2133
2134	/*----------------------------------------------------------------
2135	** Command completion queue.
2136	** It is the same size as the start queue to avoid overflow.
2137	**----------------------------------------------------------------
2138	*/
2139	u_shortunsigned short dqueueget; /* Next position to scan */
2140	u_int32 dqueue; / Completion (done) queue */
2141
2142	/*----------------------------------------------------------------
2143	** Timeout handler.
2144	**----------------------------------------------------------------
2145	*/
2146	struct timer_list timer; /* Timer handler link header */
2147	u_longunsigned long lasttime;
2148	u_longunsigned long settle_time; /* Resetting the SCSI BUS */
2149
2150	/*----------------------------------------------------------------
2151	** Debugging and profiling.
2152	**----------------------------------------------------------------
2153	*/
2154	struct ncr_reg regdump; /* Register dump */
2155	u_longunsigned long regtime; /* Time it has been done */
2156
2157	/*----------------------------------------------------------------
2158	** Miscellaneous buffers accessed by the scripts-processor.
2159	** They shall be DWORD aligned, because they may be read or
2160	** written with a script command.
2161	**----------------------------------------------------------------
2162	*/
2163	u_charunsigned char msgout[12]; /* Buffer for MESSAGE OUT */
2164	u_charunsigned char msgin [12]; /* Buffer for MESSAGE IN */
2165	u_int32 lastmsg; /* Last SCSI message sent */
2166	u_charunsigned char scratch; /* Scratch for SCSI receive */
2167
2168	/*----------------------------------------------------------------
2169	** Miscellaneous configuration and status parameters.
2170	**----------------------------------------------------------------
2171	*/
2172	u_charunsigned char scsi_mode; /* Current SCSI BUS mode */
2173	u_charunsigned char order; /* Tag order to use */
2174	u_charunsigned char verbose; /* Verbosity for this controller*/
2175	u_int32 ncr_cache; /* Used for cache test at init. */
2176	u_longunsigned long p_ncb; /* BUS address of this NCB */
2177
2178	/*----------------------------------------------------------------
2179	** CCB lists and queue.
2180	**----------------------------------------------------------------
2181	*/
2182	ccb_p ccbh[CCB_HASH_SIZE(1UL << 8)]; /* CCB hashed by DSA value */
2183	struct ccb ccbc; / CCB chain */
2184	XPT_QUEHEAD free_ccbq; /* Queue of available CCBs */
2185
2186	/*----------------------------------------------------------------
2187	** IMMEDIATE ARBITRATION (IARB) control.
2188	** We keep track in 'last_cp' of the last CCB that has been
2189	** queued to the SCRIPTS processor and clear 'last_cp' when
2190	** this CCB completes. If last_cp is not zero at the moment
2191	** we queue a new CCB, we set a flag in 'last_cp' that is
2192	** used by the SCRIPTS as a hint for setting IARB.
2193	** We donnot set more than 'iarb_max' consecutive hints for
2194	** IARB in order to leave devices a chance to reselect.
2195	** By the way, any non zero value of 'iarb_max' is unfair. :)
2196	**----------------------------------------------------------------
2197	*/
2198	#ifdef SCSI_NCR_IARB_SUPPORT
2199	struct ccb last_cp; / Last queud CCB used for IARB */
2200	u_shortunsigned short iarb_max; /* Max. # consecutive IARB hints*/
2201	u_shortunsigned short iarb_count; /* Actual # of these hints */
2202	#endif
2203
2204	/*----------------------------------------------------------------
2205	** We need the LCB in order to handle disconnections and
2206	** to count active CCBs for task management. So, we use
2207	** a unique CCB for LUNs we donnot have the LCB yet.
2208	** This queue normally should have at most 1 element.
2209	**----------------------------------------------------------------
2210	*/
2211	XPT_QUEHEAD b0_ccbq;
2212
2213	/*----------------------------------------------------------------
2214	** We use a different scatter function for 896 rev 1.
2215	**----------------------------------------------------------------
2216	*/
2217	int (scatter) (ncb_p, ccb_p, Scsi_Cmnd );
2218
2219	/*----------------------------------------------------------------
2220	** Command abort handling.
2221	** We need to synchronize tightly with the SCRIPTS
2222	** processor in order to handle things correctly.
2223	**----------------------------------------------------------------
2224	*/
2225	u_charunsigned char abrt_msg[4]; /* Message to send buffer */
2226	struct scr_tblmove abrt_tbl; /* Table for the MOV of it */
2227	struct scr_tblsel abrt_sel; /* Sync params for selection */
2228	u_charunsigned char istat_sem; /* Tells the chip to stop (SEM) */
2229
2230	/*----------------------------------------------------------------
2231	** Fields that should be removed or changed.
2232	**----------------------------------------------------------------
2233	*/
2234	struct usrcmd user; /* Command from user */
2235	volatile u_charunsigned char release_stage; /* Synchronisation stage on release */
2236
2237	/*----------------------------------------------------------------
2238	** Fields that are used (primarily) for integrity check
2239	**----------------------------------------------------------------
2240	*/
2241	unsigned char check_integrity; /* Enable midlayer integ. check on
2242	* bus scan. */
2243	#ifdef SCSI_NCR_INTEGRITY_CHECKING
2244	unsigned char check_integ_par; /* Set if par or Init. Det. error
2245	* used only during integ check */
2246	#endif
2247	};
2248
2249	#define NCB_PHYS(np, lbl)(np->p_ncb + ((size_t) (&((struct ncb )0)->lbl))) (np->p_ncb + offsetof(struct ncb, lbl)((size_t) (&((struct ncb )0)->lbl)))
2250	#define NCB_SCRIPT_PHYS(np,lbl)(np->p_script + ((size_t) (&((struct script )0)->lbl ))) (np->p_script + offsetof (struct script, lbl)((size_t) (&((struct script )0)->lbl)))
2251	#define NCB_SCRIPTH_PHYS(np,lbl)(np->p_scripth + ((size_t) (&((struct scripth )0)-> lbl))) (np->p_scripth + offsetof (struct scripth,lbl)((size_t) (&((struct scripth )0)->lbl)))
2252	#define NCB_SCRIPTH0_PHYS(np,lbl)(np->p_scripth0+((size_t) (&((struct scripth )0)-> lbl))) (np->p_scripth0+offsetof (struct scripth,lbl)((size_t) (&((struct scripth )0)->lbl)))
2253
2254	/*==========================================================
2255	**
2256	**
2257	** Script for NCR-Processor.
2258	**
2259	** Use ncr_script_fill() to create the variable parts.
2260	** Use ncr_script_copy_and_bind() to make a copy and
2261	** bind to physical addresses.
2262	**
2263	**
2264	**==========================================================
2265	**
2266	** We have to know the offsets of all labels before
2267	** we reach them (for forward jumps).
2268	** Therefore we declare a struct here.
2269	** If you make changes inside the script,
2270	** DONT FORGET TO CHANGE THE LENGTHS HERE!
2271	**
2272	**----------------------------------------------------------
2273	*/
2274
2275	/*
2276	** Script fragments which are loaded into the on-chip RAM
2277	** of 825A, 875, 876, 895, 895A and 896 chips.
2278	*/
2279	struct script {
2280	ncrcmd start [ 14];
2281	ncrcmd getjob_begin [ 4];
2282	ncrcmd getjob_end [ 4];
2283	ncrcmd select [ 8];
2284	ncrcmd wf_sel_done [ 2];
2285	ncrcmd send_ident [ 2];
2286	#ifdef SCSI_NCR_IARB_SUPPORT
2287	ncrcmd select2 [ 8];
2288	#else
2289	ncrcmd select2 [ 2];
2290	#endif
2291	ncrcmd command [ 2];
2292	ncrcmd dispatch [ 28];
2293	ncrcmd sel_no_cmd [ 10];
2294	ncrcmd init [ 6];
2295	ncrcmd clrack [ 4];
2296	ncrcmd disp_status [ 4];
2297	ncrcmd datai_done [ 26];
2298	ncrcmd datao_done [ 12];
2299	ncrcmd ign_i_w_r_msg [ 4];
2300	ncrcmd datai_phase [ 2];
2301	ncrcmd datao_phase [ 4];
2302	ncrcmd msg_in [ 2];
2303	ncrcmd msg_in2 [ 10];
2304	#ifdef SCSI_NCR_IARB_SUPPORT
2305	ncrcmd status [ 14];
2306	#else
2307	ncrcmd status [ 10];
2308	#endif
2309	ncrcmd complete [ 8];
2310	#ifdef SCSI_NCR_PCIQ_MAY_REORDER_WRITES
2311	ncrcmd complete2 [ 12];
2312	#else
2313	ncrcmd complete2 [ 10];
2314	#endif
2315	#ifdef SCSI_NCR_PCIQ_SYNC_ON_INTR
2316	ncrcmd done [ 18];
2317	#else
2318	ncrcmd done [ 14];
2319	#endif
2320	ncrcmd done_end [ 2];
2321	ncrcmd save_dp [ 8];
2322	ncrcmd restore_dp [ 4];
2323	ncrcmd disconnect [ 20];
2324	#ifdef SCSI_NCR_IARB_SUPPORT
2325	ncrcmd idle [ 4];
2326	#else
2327	ncrcmd idle [ 2];
2328	#endif
2329	#ifdef SCSI_NCR_IARB_SUPPORT
2330	ncrcmd ungetjob [ 6];
2331	#else
2332	ncrcmd ungetjob [ 4];
2333	#endif
2334	ncrcmd reselect [ 4];
2335	ncrcmd reselected [ 20];
2336	ncrcmd resel_scntl4 [ 30];
2337	#if MAX_TASKS(256/4)*4 > 512
2338	ncrcmd resel_tag [ 18];
2339	#elif MAX_TASKS(256/4)*4 > 256
2340	ncrcmd resel_tag [ 12];
2341	#else
2342	ncrcmd resel_tag [ 8];
2343	#endif
2344	ncrcmd resel_go [ 6];
2345	ncrcmd resel_notag [ 2];
2346	ncrcmd resel_dsa [ 8];
2347	ncrcmd data_in [MAX_SCATTER((127)) * SCR_SG_SIZE(2)];
2348	ncrcmd data_in2 [ 4];
2349	ncrcmd data_out [MAX_SCATTER((127)) * SCR_SG_SIZE(2)];
2350	ncrcmd data_out2 [ 4];
2351	ncrcmd pm0_data [ 12];
2352	ncrcmd pm0_data_out [ 6];
2353	ncrcmd pm0_data_end [ 6];
2354	ncrcmd pm1_data [ 12];
2355	ncrcmd pm1_data_out [ 6];
2356	ncrcmd pm1_data_end [ 6];
2357	};
2358
2359	/*
2360	** Script fragments which stay in main memory for all chips
2361	** except for the 895A and 896 that support 8K on-chip RAM.
2362	*/
2363	struct scripth {
2364	ncrcmd start64 [ 2];
2365	ncrcmd no_data [ 2];
2366	ncrcmd sel_for_abort [ 18];
2367	ncrcmd sel_for_abort_1 [ 2];
2368	ncrcmd select_no_atn [ 8];
2369	ncrcmd wf_sel_done_no_atn [ 4];
2370
2371	ncrcmd msg_in_etc [ 14];
2372	ncrcmd msg_received [ 4];
2373	ncrcmd msg_weird_seen [ 4];
2374	ncrcmd msg_extended [ 20];
2375	ncrcmd msg_bad [ 6];
2376	ncrcmd msg_weird [ 4];
2377	ncrcmd msg_weird1 [ 8];
2378
2379	ncrcmd wdtr_resp [ 6];
2380	ncrcmd send_wdtr [ 4];
2381	ncrcmd sdtr_resp [ 6];
2382	ncrcmd send_sdtr [ 4];
2383	ncrcmd ppr_resp [ 6];
2384	ncrcmd send_ppr [ 4];
2385	ncrcmd nego_bad_phase [ 4];
2386	ncrcmd msg_out [ 4];
2387	ncrcmd msg_out_done [ 4];
2388	ncrcmd data_ovrun [ 2];
2389	ncrcmd data_ovrun1 [ 22];
2390	ncrcmd data_ovrun2 [ 8];
2391	ncrcmd abort_resel [ 16];
2392	ncrcmd resend_ident [ 4];
2393	ncrcmd ident_break [ 4];
2394	ncrcmd ident_break_atn [ 4];
2395	ncrcmd sdata_in [ 6];
2396	ncrcmd data_io [ 2];
2397	ncrcmd data_io_com [ 8];
2398	ncrcmd data_io_out [ 12];
2399	ncrcmd resel_bad_lun [ 4];
2400	ncrcmd bad_i_t_l [ 4];
2401	ncrcmd bad_i_t_l_q [ 4];
2402	ncrcmd bad_status [ 6];
2403	ncrcmd tweak_pmj [ 12];
2404	ncrcmd pm_handle [ 20];
2405	ncrcmd pm_handle1 [ 4];
2406	ncrcmd pm_save [ 4];
2407	ncrcmd pm0_save [ 14];
2408	ncrcmd pm1_save [ 14];
2409
2410	/* WSR handling */
2411	#ifdef SYM_DEBUG_PM_WITH_WSR
2412	ncrcmd pm_wsr_handle [ 44];
2413	#else
2414	ncrcmd pm_wsr_handle [ 42];
2415	#endif
2416	ncrcmd wsr_ma_helper [ 4];
2417
2418	/* Data area */
2419	ncrcmd zero [ 1];
2420	ncrcmd scratch [ 1];
2421	ncrcmd scratch1 [ 1];
2422	ncrcmd pm0_data_addr [ 1];
2423	ncrcmd pm1_data_addr [ 1];
2424	ncrcmd saved_dsa [ 1];
2425	ncrcmd saved_drs [ 1];
2426	ncrcmd done_pos [ 1];
2427	ncrcmd startpos [ 1];
2428	ncrcmd targtbl [ 1];
2429	/* End of data area */
2430
2431	#ifdef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
2432	ncrcmd start_ram [ 1];
2433	ncrcmd script0_ba [ 4];
2434	ncrcmd start_ram64 [ 3];
2435	ncrcmd script0_ba64 [ 3];
2436	ncrcmd scripth0_ba64 [ 6];
2437	ncrcmd ram_seg64 [ 1];
2438	#endif
2439	ncrcmd snooptest [ 6];
2440	ncrcmd snoopend [ 2];
2441	};
2442
2443	/*==========================================================
2444	**
2445	**
2446	** Function headers.
2447	**
2448	**
2449	**==========================================================
2450	*/
2451
2452	static ccb_p ncr_alloc_ccb (ncb_p np);
2453	static void ncr_complete (ncb_p np, ccb_p cp);
2454	static void ncr_exception (ncb_p np);
2455	static void ncr_free_ccb (ncb_p np, ccb_p cp);
2456	static ccb_p ncr_ccb_from_dsa(ncb_p np, u_longunsigned long dsa);
2457	static void ncr_init_tcb (ncb_p np, u_charunsigned char tn);
2458	static lcb_p ncr_alloc_lcb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln);
2459	static lcb_p ncr_setup_lcb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln,
2460	u_charunsigned char *inq_data);
2461	static void ncr_getclock (ncb_p np, int mult);
2462	static u_intunsigned int ncr_getpciclock (ncb_p np);
2463	static void ncr_selectclock (ncb_p np, u_charunsigned char scntl3);
2464	static ccb_p ncr_get_ccb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln);
2465	static void ncr_init (ncb_p np, int reset, char * msg, u_longunsigned long code);
2466	static void ncr_int_sbmc (ncb_p np);
2467	static void ncr_int_par (ncb_p np, u_shortunsigned short sist);
2468	static void ncr_int_ma (ncb_p np);
2469	static void ncr_int_sir (ncb_p np);
2470	static void ncr_int_sto (ncb_p np);
2471	static void ncr_int_udc (ncb_p np);
2472	static void ncr_negotiate (ncb_p np, tcb_p tp);
2473	static int ncr_prepare_nego(ncb_p np, ccb_p cp, u_charunsigned char *msgptr);
2474	#ifdef SCSI_NCR_INTEGRITY_CHECKING
2475	static int ncr_ic_nego(ncb_p np, ccb_p cp, Scsi_Cmnd cmd, u_charunsigned char msgptr);
2476	#endif
2477	static void ncr_script_copy_and_bind
2478	(ncb_p np, ncrcmd src, ncrcmd dst, int len);
2479	static void ncr_script_fill (struct script * scr, struct scripth * scripth);
2480	static int ncr_scatter_896R1 (ncb_p np, ccb_p cp, Scsi_Cmnd *cmd);
2481	static int ncr_scatter (ncb_p np, ccb_p cp, Scsi_Cmnd *cmd);
2482	static void ncr_getsync (ncb_p np, u_charunsigned char sfac, u_charunsigned char fakp, u_charunsigned char scntl3p);
2483	static void ncr_get_xfer_info(ncb_p np, tcb_p tp, u_charunsigned char factor, u_charunsigned char offset, u_charunsigned char *width);
2484	static void ncr_setsync (ncb_p np, ccb_p cp, u_charunsigned char scntl3, u_charunsigned char sxfer, u_charunsigned char scntl4);
2485	static void ncr_set_sync_wide_status (ncb_p np, u_charunsigned char target);
2486	static void ncr_setup_tags (ncb_p np, u_charunsigned char tn, u_charunsigned char ln);
2487	static void ncr_setwide (ncb_p np, ccb_p cp, u_charunsigned char wide, u_charunsigned char ack);
2488	static void ncr_setsyncwide (ncb_p np, ccb_p cp, u_charunsigned char scntl3, u_charunsigned char sxfer, u_charunsigned char scntl4, u_charunsigned char wide);
2489	static int ncr_show_msg (u_charunsigned char * msg);
2490	static void ncr_print_msg (ccb_p cp, char label, u_charunsigned char msg);
2491	static int ncr_snooptest (ncb_p np);
2492	static void ncr_timeout (ncb_p np);
2493	static void ncr_wakeup (ncb_p np, u_longunsigned long code);
2494	static int ncr_wakeup_done (ncb_p np);
2495	static void ncr_start_next_ccb (ncb_p np, lcb_p lp, int maxn);
2496	static void ncr_put_start_queue(ncb_p np, ccb_p cp);
2497	static void ncr_chip_reset (ncb_p np);
2498	static void ncr_soft_reset (ncb_p np);
2499	static void ncr_start_reset (ncb_p np);
2500	static int ncr_reset_scsi_bus (ncb_p np, int enab_int, int settle_delay);
2501	static int ncr_compute_residual (ncb_p np, ccb_p cp);
2502
2503	#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
2504	static void ncr_usercmd (ncb_p np);
2505	#endif
2506
2507	static int ncr_attach (Scsi_Host_Template tpnt, int unit, ncr_device device);
2508	static void ncr_free_resources(ncb_p np);
2509
2510	static void insert_into_waiting_list(ncb_p np, Scsi_Cmnd *cmd);
2511	static Scsi_Cmnd retrieve_from_waiting_list(int to_remove, ncb_p np, Scsi_Cmnd cmd);
2512	static void process_waiting_list(ncb_p np, int sts);
2513
2514	#define remove_from_waiting_list(np, cmd)retrieve_from_waiting_list(1, (np), (cmd)) \
2515	retrieve_from_waiting_list(1, (np), (cmd))
2516	#define requeue_waiting_list(np)process_waiting_list((np), 0x00) process_waiting_list((np), DID_OK0x00)
2517	#define reset_waiting_list(np)process_waiting_list((np), 0x08) process_waiting_list((np), DID_RESET0x08)
2518
2519	#ifdef SCSI_NCR_NVRAM_SUPPORT
2520	static void ncr_get_nvram (ncr_device devp, ncr_nvram nvp);
2521	static int sym_read_Tekram_nvram (ncr_slot *np, u_shortunsigned short device_id,
2522	Tekram_nvram *nvram);
2523	static int sym_read_Symbios_nvram (ncr_slot np, Symbios_nvram nvram);
2524	#endif
2525
2526	/*==========================================================
2527	**
2528	**
2529	** Global static data.
2530	**
2531	**
2532	**==========================================================
2533	*/
2534
2535	static inlineinline __attribute__((always_inline)) char *ncr_name (ncb_p np)
2536	{
2537	return np->inst_name;
2538	}
2539
2540
2541	/*==========================================================
2542	**
2543	**
2544	** Scripts for NCR-Processor.
2545	**
2546	** Use ncr_script_bind for binding to physical addresses.
2547	**
2548	**
2549	**==========================================================
2550	**
2551	** NADDR generates a reference to a field of the controller data.
2552	** PADDR generates a reference to another part of the script.
2553	** RADDR generates a reference to a script processor register.
2554	** FADDR generates a reference to a script processor register
2555	** with offset.
2556	**
2557	**----------------------------------------------------------
2558	*/
2559
2560	#define RELOC_SOFTC0x40000000 0x40000000
2561	#define RELOC_LABEL0x50000000 0x50000000
2562	#define RELOC_REGISTER0x60000000 0x60000000
2563	#if 0
2564	#define RELOC_KVAR 0x70000000
2565	#endif
2566	#define RELOC_LABELH0x80000000 0x80000000
2567	#define RELOC_MASK0xf0000000 0xf0000000
2568
2569	#define NADDR(label)(0x40000000 \| ((size_t) (&((struct ncb )0)->label))) (RELOC_SOFTC0x40000000 \| offsetof(struct ncb, label)((size_t) (&((struct ncb )0)->label)))
2570	#define PADDR(label)(0x50000000 \| ((size_t) (&((struct script )0)->label) )) (RELOC_LABEL0x50000000 \| offsetof(struct script, label)((size_t) (&((struct script )0)->label)))
2571	#define PADDRH(label)(0x80000000 \| ((size_t) (&((struct scripth )0)->label ))) (RELOC_LABELH0x80000000 \| offsetof(struct scripth, label)((size_t) (&((struct scripth )0)->label)))
2572	#define RADDR(label)(0x60000000 \| (((size_t) (&((struct ncr_reg )0)->nc_label )))) (RELOC_REGISTER0x60000000 \| REG(label)(((size_t) (&((struct ncr_reg )0)->nc_label))))
2573	#define FADDR(label,ofs)(0x60000000 \| (((((size_t) (&((struct ncr_reg )0)->nc_label ))))+(ofs)))(RELOC_REGISTER0x60000000 \| ((REG(label)(((size_t) (&((struct ncr_reg )0)->nc_label))))+(ofs)))
2574	#define KVAR(which)(RELOC_KVAR \| (which)) (RELOC_KVAR \| (which))
2575
2576	#define SCR_DATA_ZERO0xf00ff00f 0xf00ff00f
2577
2578	#ifdef RELOC_KVAR
2579	#define SCRIPT_KVAR_JIFFIES (0)
2580	#define SCRIPT_KVAR_FIRST SCRIPT_KVAR_JIFFIES
2581	#define SCRIPT_KVAR_LAST SCRIPT_KVAR_JIFFIES
2582	/*
2583	* Kernel variables referenced in the scripts.
2584	* THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY.
2585	*/
2586	static void *script_kvars[] __initdata =
2587	{ (void *)&jiffies };
2588	#endif
2589
2590	static struct script script0 __initdata = {
2591	/--------------------------< START >-----------------------/ {
2592	/*
2593	** This NOP will be patched with LED ON
2594	** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
2595	*/
2596	SCR_NO_OP0x80000000,
2597	0,
2598	/*
2599	** Clear SIGP.
2600	*/
2601	SCR_FROM_REG (ctest2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ctest2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_ctest2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2602	0,
2603
2604	/*
2605	** Stop here if the C code wants to perform
2606	** some error recovery procedure manually.
2607	** (Indicate this by setting SEM in ISTAT)
2608	*/
2609	SCR_FROM_REG (istat)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_istat)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_istat)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2610	0,
2611	/*
2612	** Report to the C code the next position in
2613	** the start queue the SCRIPTS will schedule.
2614	** The C code must not change SCRATCHA.
2615	*/
2616	SCR_LOAD_ABS (scratcha, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
2617	PADDRH (startpos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->startpos ))),
2618	SCR_INT0x98080000 ^ IFTRUE (MASK (SEM, SEM))(0x00000000 \| ((0x00040000 \| (((0x10 ^ 0xff) & 0xff) << 8ul)\|((0x10) & 0xff)))),
2619	SIR_SCRIPT_STOPPED(7),
2620
2621	/*
2622	** Start the next job.
2623	**
2624	** @DSA = start point for this job.
2625	** SCRATCHA = address of this job in the start queue.
2626	**
2627	** We will restore startpos with SCRATCHA if we fails the
2628	** arbitration or if it is the idle job.
2629	**
2630	** The below GETJOB_BEGIN to GETJOB_END section of SCRIPTS
2631	** is a critical path. If it is partially executed, it then
2632	** may happen that the job address is not yet in the DSA
2633	** and the the next queue position points to the next JOB.
2634	*/
2635	SCR_LOAD_ABS (dsa, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul)) \| (4)),
2636	PADDRH (startpos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->startpos ))),
2637	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
2638	4,
2639	}/-------------------------< GETJOB_BEGIN >------------------/,{
2640	SCR_STORE_ABS (temp, 4)(0xe0000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul)) \| (4)),
2641	PADDRH (startpos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->startpos ))),
2642	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
2643	0,
2644	}/-------------------------< GETJOB_END >--------------------/,{
2645	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
2646	0,
2647	SCR_RETURN0x90080000,
2648	0,
2649
2650	}/-------------------------< SELECT >----------------------/,{
2651	/*
2652	** DSA contains the address of a scheduled
2653	** data structure.
2654	**
2655	** SCRATCHA contains the address of the start queue
2656	** entry which points to the next job.
2657	**
2658	** Set Initiator mode.
2659	**
2660	** (Target mode is left as an exercise for the reader)
2661	*/
2662
2663	SCR_CLR (SCR_TRG)(0x60000000 \| (0x00000200)),
2664	0,
2665	/*
2666	** And try to select this target.
2667	*/
2668	SCR_SEL_TBL_ATN0x43000000 ^ offsetof (struct dsb, select)((size_t) (&((struct dsb *)0)->select)),
2669	PADDR (ungetjob)(0x50000000 \| ((size_t) (&((struct script *)0)->ungetjob ))),
2670	/*
2671	** Now there are 4 possibilities:
2672	**
2673	** (1) The ncr looses arbitration.
2674	** This is ok, because it will try again,
2675	** when the bus becomes idle.
2676	** (But beware of the timeout function!)
2677	**
2678	** (2) The ncr is reselected.
2679	** Then the script processor takes the jump
2680	** to the RESELECT label.
2681	**
2682	** (3) The ncr wins arbitration.
2683	** Then it will execute SCRIPTS instruction until
2684	** the next instruction that checks SCSI phase.
2685	** Then will stop and wait for selection to be
2686	** complete or selection time-out to occur.
2687	**
2688	** After having won arbitration, the ncr SCRIPTS
2689	** processor is able to execute instructions while
2690	** the SCSI core is performing SCSI selection. But
2691	** some script instruction that is not waiting for
2692	** a valid phase (or selection timeout) to occur
2693	** breaks the selection procedure, by probably
2694	** affecting timing requirements.
2695	** So we have to wait immediately for the next phase
2696	** or the selection to complete or time-out.
2697	*/
2698
2699	/*
2700	** load the savep (saved pointer) into
2701	** the actual data pointer.
2702	*/
2703	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
2704	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
2705	/*
2706	** Initialize the status registers
2707	*/
2708	SCR_LOAD_REL (scr0, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)),
2709	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
2710
2711	}/-------------------------< WF_SEL_DONE >----------------------/,{
2712	SCR_INT0x98080000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
2713	SIR_SEL_ATN_NO_MSG_OUT(2),
2714	}/-------------------------< SEND_IDENT >----------------------/,{
2715	/*
2716	** Selection complete.
2717	** Send the IDENTIFY and SIMPLE_TAG messages
2718	** (and the M_X_SYNC_REQ / M_X_WIDE_REQ message)
2719	*/
2720	SCR_MOVE_TBL(0x10000000 \| 0x08000000) ^ SCR_MSG_OUT0x06000000,
2721	offsetof (struct dsb, smsg)((size_t) (&((struct dsb *)0)->smsg)),
2722	}/-------------------------< SELECT2 >----------------------/,{
2723	#ifdef SCSI_NCR_IARB_SUPPORT
2724	/*
2725	** Set IMMEDIATE ARBITRATION if we have been given
2726	** a hint to do so. (Some job to do after this one).
2727	*/
2728	SCR_FROM_REG (HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2729	0,
2730	SCR_JUMPR0x80880000 ^ IFFALSE (MASK (HF_HINT_IARB, HF_HINT_IARB))(0x00080000 \| ((0x00040000 \| (((HF_HINT_IARB ^ 0xff) & 0xff ) << 8ul)\|((HF_HINT_IARB) & 0xff)))),
2731	8,
2732	SCR_REG_REG (scntl1, SCR_OR, IARB)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl1)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl1)))) & 0x80))) \| (0x02000000 ) \| (((0x02)&0xff)<<8ul)),
2733	0,
2734	#endif
2735	/*
2736	** Anticipate the COMMAND phase.
2737	** This is the PHASE we expect at this point.
2738	*/
2739	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_COMMAND))(0x00080000 \| ((0x00030000 \| (0x02000000)))),
2740	PADDR (sel_no_cmd)(0x50000000 \| ((size_t) (&((struct script *)0)->sel_no_cmd ))),
2741
2742	}/-------------------------< COMMAND >--------------------/,{
2743	/*
2744	** ... and send the command
2745	*/
2746	SCR_MOVE_TBL(0x10000000 \| 0x08000000) ^ SCR_COMMAND0x02000000,
2747	offsetof (struct dsb, cmd)((size_t) (&((struct dsb *)0)->cmd)),
2748
2749	}/-----------------------< DISPATCH >----------------------/,{
2750	/*
2751	** MSG_IN is the only phase that shall be
2752	** entered at least once for each (re)selection.
2753	** So we test it first.
2754	*/
2755	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_MSG_IN))(0x00000000 \| ((0x00030000 \| (0x07000000)))),
2756	PADDR (msg_in)(0x50000000 \| ((size_t) (&((struct script *)0)->msg_in ))),
2757	SCR_JUMP0x80080000 ^ IFTRUE (IF (SCR_DATA_OUT))(0x00000000 \| ((0x00020000 \| (0x00000000)))),
2758	PADDR (datao_phase)(0x50000000 \| ((size_t) (&((struct script *)0)->datao_phase ))),
2759	SCR_JUMP0x80080000 ^ IFTRUE (IF (SCR_DATA_IN))(0x00000000 \| ((0x00020000 \| (0x01000000)))),
2760	PADDR (datai_phase)(0x50000000 \| ((size_t) (&((struct script *)0)->datai_phase ))),
2761	SCR_JUMP0x80080000 ^ IFTRUE (IF (SCR_STATUS))(0x00000000 \| ((0x00020000 \| (0x03000000)))),
2762	PADDR (status)(0x50000000 \| ((size_t) (&((struct script *)0)->status ))),
2763	SCR_JUMP0x80080000 ^ IFTRUE (IF (SCR_COMMAND))(0x00000000 \| ((0x00020000 \| (0x02000000)))),
2764	PADDR (command)(0x50000000 \| ((size_t) (&((struct script *)0)->command ))),
2765	SCR_JUMP0x80080000 ^ IFTRUE (IF (SCR_MSG_OUT))(0x00000000 \| ((0x00020000 \| (0x06000000)))),
2766	PADDRH (msg_out)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_out ))),
2767	/*
2768	* Discard as many illegal phases as
2769	* required and tell the C code about.
2770	*/
2771	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_ILG_OUT))(0x00080000 \| ((0x00030000 \| (0x04000000)))),
2772	16,
2773	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_ILG_OUT0x04000000,
2774	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
2775	SCR_JUMPR0x80880000 ^ IFTRUE (WHEN (SCR_ILG_OUT))(0x00000000 \| ((0x00030000 \| (0x04000000)))),
2776	-16,
2777	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_ILG_IN))(0x00080000 \| ((0x00030000 \| (0x05000000)))),
2778	16,
2779	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_ILG_IN0x05000000,
2780	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
2781	SCR_JUMPR0x80880000 ^ IFTRUE (WHEN (SCR_ILG_IN))(0x00000000 \| ((0x00030000 \| (0x05000000)))),
2782	-16,
2783	SCR_INT0x98080000,
2784	SIR_BAD_PHASE(23),
2785	SCR_JUMP0x80080000,
2786	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2787	}/---------------------< SEL_NO_CMD >----------------------/,{
2788	/*
2789	** The target does not switch to command
2790	** phase after IDENTIFY has been sent.
2791	**
2792	** If it stays in MSG OUT phase send it
2793	** the IDENTIFY again.
2794	*/
2795	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_MSG_OUT))(0x00000000 \| ((0x00030000 \| (0x06000000)))),
2796	PADDRH (resend_ident)(0x80000000 \| ((size_t) (&((struct scripth *)0)->resend_ident ))),
2797	/*
2798	** If target does not switch to MSG IN phase
2799	** and we sent a negotiation, assert the
2800	** failure immediately.
2801	*/
2802	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_MSG_IN))(0x00000000 \| ((0x00030000 \| (0x07000000)))),
2803	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2804	SCR_FROM_REG (HS_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr1)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2805	0,
2806	SCR_INT0x98080000 ^ IFTRUE (DATA (HS_NEGOTIATE))(0x00000000 \| ((0x00040000 \| (((2)) & 0xff)))),
2807	SIR_NEGO_FAILED(5),
2808	/*
2809	** Jump to dispatcher.
2810	*/
2811	SCR_JUMP0x80080000,
2812	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2813
2814	}/-------------------------< INIT >------------------------/,{
2815	/*
2816	** Wait for the SCSI RESET signal to be
2817	** inactive before restarting operations,
2818	** since the chip may hang on SEL_ATN
2819	** if SCSI RESET is active.
2820	*/
2821	SCR_FROM_REG (sstat0)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sstat0)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_sstat0)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2822	0,
2823	SCR_JUMPR0x80880000 ^ IFTRUE (MASK (IRST, IRST))(0x00000000 \| ((0x00040000 \| (((0x02 ^ 0xff) & 0xff) << 8ul)\|((0x02) & 0xff)))),
2824	-16,
2825	SCR_JUMP0x80080000,
2826	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
2827	}/-------------------------< CLRACK >----------------------/,{
2828	/*
2829	** Terminate possible pending message phase.
2830	*/
2831	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
2832	0,
2833	SCR_JUMP0x80080000,
2834	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2835
2836	}/-------------------------< DISP_STATUS >----------------------/,{
2837	/*
2838	** Anticipate STATUS phase.
2839	**
2840	** Does spare 3 SCRIPTS instructions when we have
2841	** completed the INPUT of the data.
2842	*/
2843	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_STATUS))(0x00000000 \| ((0x00030000 \| (0x03000000)))),
2844	PADDR (status)(0x50000000 \| ((size_t) (&((struct script *)0)->status ))),
2845	SCR_JUMP0x80080000,
2846	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2847
2848	}/-------------------------< DATAI_DONE >-------------------/,{
2849	/*
2850	* If the device wants us to send more data,
2851	* we must count the extra bytes.
2852	*/
2853	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_DATA_IN))(0x00000000 \| ((0x00030000 \| (0x01000000)))),
2854	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
2855	/*
2856	** If the SWIDE is not full, jump to dispatcher.
2857	** We anticipate a STATUS phase.
2858	** If we get later an IGNORE WIDE RESIDUE, we
2859	** will alias it as a MODIFY DP (-1).
2860	*/
2861	SCR_FROM_REG (scntl2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2862	0,
2863	SCR_JUMP0x80080000 ^ IFFALSE (MASK (WSR, WSR))(0x00080000 \| ((0x00040000 \| (((0x01 ^ 0xff) & 0xff) << 8ul)\|((0x01) & 0xff)))),
2864	PADDR (disp_status)(0x50000000 \| ((size_t) (&((struct script *)0)->disp_status ))),
2865	/*
2866	** The SWIDE is full.
2867	** Clear this condition.
2868	*/
2869	SCR_REG_REG (scntl2, SCR_OR, WSR)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0x01)&0xff)<<8ul)),
2870	0,
2871	/*
2872	* We are expecting an IGNORE RESIDUE message
2873	* from the device, otherwise we are in data
2874	* overrun condition. Check against MSG_IN phase.
2875	*/
2876	SCR_INT0x98080000 ^ IFFALSE (WHEN (SCR_MSG_IN))(0x00080000 \| ((0x00030000 \| (0x07000000)))),
2877	SIR_SWIDE_OVERRUN(9),
2878	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_MSG_IN))(0x00080000 \| ((0x00030000 \| (0x07000000)))),
2879	PADDR (disp_status)(0x50000000 \| ((size_t) (&((struct script *)0)->disp_status ))),
2880	/*
2881	* We are in MSG_IN phase,
2882	* Read the first byte of the message.
2883	* If it is not an IGNORE RESIDUE message,
2884	* signal overrun and jump to message
2885	* processing.
2886	*/
2887	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
2888	NADDR (msgin[0])(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin[0]) )),
2889	SCR_INT0x98080000 ^ IFFALSE (DATA (M_IGN_RESIDUE))(0x00080000 \| ((0x00040000 \| (((0x23)) & 0xff)))),
2890	SIR_SWIDE_OVERRUN(9),
2891	SCR_JUMP0x80080000 ^ IFFALSE (DATA (M_IGN_RESIDUE))(0x00080000 \| ((0x00040000 \| (((0x23)) & 0xff)))),
2892	PADDR (msg_in2)(0x50000000 \| ((size_t) (&((struct script *)0)->msg_in2 ))),
2893
2894	/*
2895	* We got the message we expected.
2896	* Read the 2nd byte, and jump to dispatcher.
2897	*/
2898	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
2899	0,
2900	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
2901	NADDR (msgin[1])(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin[1]) )),
2902	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
2903	0,
2904	SCR_JUMP0x80080000,
2905	PADDR (disp_status)(0x50000000 \| ((size_t) (&((struct script *)0)->disp_status ))),
2906
2907	}/-------------------------< DATAO_DONE >-------------------/,{
2908	/*
2909	* If the device wants us to send more data,
2910	* we must count the extra bytes.
2911	*/
2912	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_DATA_OUT))(0x00000000 \| ((0x00030000 \| (0x00000000)))),
2913	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
2914	/*
2915	** If the SODL is not full jump to dispatcher.
2916	** We anticipate a MSG IN phase or a STATUS phase.
2917	*/
2918	SCR_FROM_REG (scntl2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
2919	0,
2920	SCR_JUMP0x80080000 ^ IFFALSE (MASK (WSS, WSS))(0x00080000 \| ((0x00040000 \| (((0x08 ^ 0xff) & 0xff) << 8ul)\|((0x08) & 0xff)))),
2921	PADDR (disp_status)(0x50000000 \| ((size_t) (&((struct script *)0)->disp_status ))),
2922	/*
2923	** The SODL is full, clear this condition.
2924	*/
2925	SCR_REG_REG (scntl2, SCR_OR, WSS)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0x08)&0xff)<<8ul)),
2926	0,
2927	/*
2928	** And signal a DATA UNDERRUN condition
2929	** to the C code.
2930	*/
2931	SCR_INT0x98080000,
2932	SIR_SODL_UNDERRUN(10),
2933	SCR_JUMP0x80080000,
2934	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
2935
2936	}/-------------------------< IGN_I_W_R_MSG >--------------/,{
2937	/*
2938	** We jump here from the phase mismatch interrupt,
2939	** When we have a SWIDE and the device has presented
2940	** a IGNORE WIDE RESIDUE message on the BUS.
2941	** We just have to throw away this message and then
2942	** to jump to dispatcher.
2943	*/
2944	SCR_MOVE_ABS (2)((0x00000000 \| 0x08000000) \| (2)) ^ SCR_MSG_IN0x07000000,
2945	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
2946	/*
2947	** Clear ACK and jump to dispatcher.
2948	*/
2949	SCR_JUMP0x80080000,
2950	PADDR (clrack)(0x50000000 \| ((size_t) (&((struct script *)0)->clrack ))),
2951
2952	}/-------------------------< DATAI_PHASE >------------------/,{
2953	SCR_RETURN0x90080000,
2954	0,
2955	}/-------------------------< DATAO_PHASE >------------------/,{
2956	/*
2957	** Patch for 53c1010_66 only - to allow A0 part
2958	** to operate properly in a 33MHz PCI bus.
2959	**
2960	** SCR_REG_REG(scntl4, SCR_OR, 0x0c),
2961	** 0,
2962	*/
2963	SCR_NO_OP0x80000000,
2964	0,
2965	SCR_RETURN0x90080000,
2966	0,
2967	}/-------------------------< MSG_IN >--------------------/,{
2968	/*
2969	** Get the first byte of the message.
2970	**
2971	** The script processor doesn't negate the
2972	** ACK signal after this transfer.
2973	*/
2974	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
2975	NADDR (msgin[0])(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin[0]) )),
2976	}/-------------------------< MSG_IN2 >--------------------/,{
2977	/*
2978	** Check first against 1 byte messages
2979	** that we handle from SCRIPTS.
2980	*/
2981	SCR_JUMP0x80080000 ^ IFTRUE (DATA (M_COMPLETE))(0x00000000 \| ((0x00040000 \| (((0x00)) & 0xff)))),
2982	PADDR (complete)(0x50000000 \| ((size_t) (&((struct script *)0)->complete ))),
2983	SCR_JUMP0x80080000 ^ IFTRUE (DATA (M_DISCONNECT))(0x00000000 \| ((0x00040000 \| (((0x04)) & 0xff)))),
2984	PADDR (disconnect)(0x50000000 \| ((size_t) (&((struct script *)0)->disconnect ))),
2985	SCR_JUMP0x80080000 ^ IFTRUE (DATA (M_SAVE_DP))(0x00000000 \| ((0x00040000 \| (((0x02)) & 0xff)))),
2986	PADDR (save_dp)(0x50000000 \| ((size_t) (&((struct script *)0)->save_dp ))),
2987	SCR_JUMP0x80080000 ^ IFTRUE (DATA (M_RESTORE_DP))(0x00000000 \| ((0x00040000 \| (((0x03)) & 0xff)))),
2988	PADDR (restore_dp)(0x50000000 \| ((size_t) (&((struct script *)0)->restore_dp ))),
2989	/*
2990	** We handle all other messages from the
2991	** C code, so no need to waste on-chip RAM
2992	** for those ones.
2993	*/
2994	SCR_JUMP0x80080000,
2995	PADDRH (msg_in_etc)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_in_etc ))),
2996
2997	}/-------------------------< STATUS >--------------------/,{
2998	/*
2999	** get the status
3000	*/
3001	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_STATUS0x03000000,
3002	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
3003	#ifdef SCSI_NCR_IARB_SUPPORT
3004	/*
3005	** If STATUS is not GOOD, clear IMMEDIATE ARBITRATION,
3006	** since we may have to tamper the start queue from
3007	** the C code.
3008	*/
3009	SCR_JUMPR0x80880000 ^ IFTRUE (DATA (S_GOOD))(0x00000000 \| ((0x00040000 \| (((0x00)) & 0xff)))),
3010	8,
3011	SCR_REG_REG (scntl1, SCR_AND, ~IARB)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl1)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl1)))) & 0x80))) \| (0x04000000 ) \| (((~0x02)&0xff)<<8ul)),
3012	0,
3013	#endif
3014	/*
3015	** save status to scsi_status.
3016	** mark as complete.
3017	*/
3018	SCR_TO_REG (SS_REG)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr2)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3019	0,
3020	SCR_LOAD_REG (HS_REG, HS_COMPLETE)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr1)))) & 0x80))) \| (0x00000000 ) \| ((((4\|(0x80)))&0xff)<<8ul)),
3021	0,
3022	/*
3023	** Anticipate the MESSAGE PHASE for
3024	** the TASK COMPLETE message.
3025	*/
3026	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_MSG_IN))(0x00000000 \| ((0x00030000 \| (0x07000000)))),
3027	PADDR (msg_in)(0x50000000 \| ((size_t) (&((struct script *)0)->msg_in ))),
3028	SCR_JUMP0x80080000,
3029	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3030
3031	}/-------------------------< COMPLETE >-----------------/,{
3032	/*
3033	** Complete message.
3034	**
3035	** Copy the data pointer to LASTP in header.
3036	*/
3037	SCR_STORE_REL (temp, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3038	offsetof (struct ccb, phys.header.lastp)((size_t) (&((struct ccb *)0)->phys.header.lastp)),
3039	/*
3040	** When we terminate the cycle by clearing ACK,
3041	** the target may disconnect immediately.
3042	**
3043	** We don't want to be told of an
3044	** "unexpected disconnect",
3045	** so we disable this feature.
3046	*/
3047	SCR_REG_REG (scntl2, SCR_AND, 0x7f)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x04000000 ) \| (((0x7f)&0xff)<<8ul)),
3048	0,
3049	/*
3050	** Terminate cycle ...
3051	*/
3052	SCR_CLR (SCR_ACK\|SCR_ATN)(0x60000000 \| (0x00000040\|0x00000008)),
3053	0,
3054	/*
3055	** ... and wait for the disconnect.
3056	*/
3057	SCR_WAIT_DISC0x48000000,
3058	0,
3059	}/-------------------------< COMPLETE2 >-----------------/,{
3060	/*
3061	** Save host status to header.
3062	*/
3063	SCR_STORE_REL (scr0, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)),
3064	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
3065
3066	#ifdef SCSI_NCR_PCIQ_MAY_REORDER_WRITES
3067	/*
3068	** Some bridges may reorder DMA writes to memory.
3069	** We donnot want the CPU to deal with completions
3070	** without all the posted write having been flushed
3071	** to memory. This DUMMY READ should flush posted
3072	** buffers prior to the CPU having to deal with
3073	** completions.
3074	*/
3075	SCR_LOAD_REL (scr0, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg )0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)), / DUMMY READ */
3076	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
3077	#endif
3078	/*
3079	** If command resulted in not GOOD status,
3080	** call the C code if needed.
3081	*/
3082	SCR_FROM_REG (SS_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr2)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3083	0,
3084	SCR_CALL0x88080000 ^ IFFALSE (DATA (S_GOOD))(0x00080000 \| ((0x00040000 \| (((0x00)) & 0xff)))),
3085	PADDRH (bad_status)(0x80000000 \| ((size_t) (&((struct scripth *)0)->bad_status ))),
3086
3087	/*
3088	** If we performed an auto-sense, call
3089	** the C code to synchronyze task aborts
3090	** with UNIT ATTENTION conditions.
3091	*/
3092	SCR_FROM_REG (HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3093	0,
3094	SCR_INT0x98080000 ^ IFTRUE (MASK (HF_AUTO_SENSE, HF_AUTO_SENSE))(0x00000000 \| ((0x00040000 \| ((((1u<<4) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<4)) & 0xff)))),
3095	SIR_AUTO_SENSE_DONE(20),
3096
3097	}/------------------------< DONE >-----------------/,{
3098	#ifdef SCSI_NCR_PCIQ_SYNC_ON_INTR
3099	/*
3100	** It seems that some bridges flush everything
3101	** when the INTR line is raised. For these ones,
3102	** we can just ensure that the INTR line will be
3103	** raised before each completion. So, if it happens
3104	** that we have been faster that the CPU, we just
3105	** have to synchronize with it. A dummy programmed
3106	** interrupt will do the trick.
3107	** Note that we overlap at most 1 IO with the CPU
3108	** in this situation and that the IRQ line must not
3109	** be shared.
3110	*/
3111	SCR_FROM_REG (istat)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_istat)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_istat)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3112	0,
3113	SCR_INT0x98080000 ^ IFTRUE (MASK (INTF, INTF))(0x00000000 \| ((0x00040000 \| (((0x04 ^ 0xff) & 0xff) << 8ul)\|((0x04) & 0xff)))),
3114	SIR_DUMMY_INTERRUPT(21),
3115	#endif
3116	/*
3117	** Copy the DSA to the DONE QUEUE and
3118	** signal completion to the host.
3119	** If we are interrupted between DONE
3120	** and DONE_END, we must reset, otherwise
3121	** the completed CCB will be lost.
3122	*/
3123	SCR_STORE_ABS (dsa, 4)(0xe0000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul)) \| (4)),
3124	PADDRH (saved_dsa)(0x80000000 \| ((size_t) (&((struct scripth *)0)->saved_dsa ))),
3125	SCR_LOAD_ABS (dsa, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul)) \| (4)),
3126	PADDRH (done_pos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->done_pos ))),
3127	SCR_LOAD_ABS (scratcha, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
3128	PADDRH (saved_dsa)(0x80000000 \| ((size_t) (&((struct scripth *)0)->saved_dsa ))),
3129	SCR_STORE_REL (scratcha, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
3130	0,
3131	/*
3132	** The instruction below reads the DONE QUEUE next
3133	** free position from memory.
3134	** In addition it ensures that all PCI posted writes
3135	** are flushed and so the DSA value of the done
3136	** CCB is visible by the CPU before INTFLY is raised.
3137	*/
3138	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3139	4,
3140	SCR_INT_FLY0x98180000,
3141	0,
3142	SCR_STORE_ABS (temp, 4)(0xe0000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul)) \| (4)),
3143	PADDRH (done_pos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->done_pos ))),
3144	}/------------------------< DONE_END >-----------------/,{
3145	SCR_JUMP0x80080000,
3146	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
3147
3148	}/-------------------------< SAVE_DP >------------------/,{
3149	/*
3150	** Clear ACK immediately.
3151	** No need to delay it.
3152	*/
3153	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3154	0,
3155	/*
3156	** Keep track we received a SAVE DP, so
3157	** we will switch to the other PM context
3158	** on the next PM since the DP may point
3159	** to the current PM context.
3160	*/
3161	SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| ((((1u<<3))&0xff)<<8ul)),
3162	0,
3163	/*
3164	** SAVE_DP message:
3165	** Copy the data pointer to SAVEP in header.
3166	*/
3167	SCR_STORE_REL (temp, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3168	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
3169	SCR_JUMP0x80080000,
3170	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3171	}/-------------------------< RESTORE_DP >---------------/,{
3172	/*
3173	** RESTORE_DP message:
3174	** Copy SAVEP in header to actual data pointer.
3175	*/
3176	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3177	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
3178	SCR_JUMP0x80080000,
3179	PADDR (clrack)(0x50000000 \| ((size_t) (&((struct script *)0)->clrack ))),
3180
3181	}/-------------------------< DISCONNECT >---------------/,{
3182	/*
3183	** DISCONNECTing ...
3184	**
3185	** disable the "unexpected disconnect" feature,
3186	** and remove the ACK signal.
3187	*/
3188	SCR_REG_REG (scntl2, SCR_AND, 0x7f)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x04000000 ) \| (((0x7f)&0xff)<<8ul)),
3189	0,
3190	SCR_CLR (SCR_ACK\|SCR_ATN)(0x60000000 \| (0x00000040\|0x00000008)),
3191	0,
3192	/*
3193	** Wait for the disconnect.
3194	*/
3195	SCR_WAIT_DISC0x48000000,
3196	0,
3197	/*
3198	** Status is: DISCONNECTED.
3199	*/
3200	SCR_LOAD_REG (HS_REG, HS_DISCONNECT)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr1)))) & 0x80))) \| (0x00000000 ) \| ((((3))&0xff)<<8ul)),
3201	0,
3202	/*
3203	** Save host status to header.
3204	*/
3205	SCR_STORE_REL (scr0, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)),
3206	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
3207	/*
3208	** If QUIRK_AUTOSAVE is set,
3209	** do an "save pointer" operation.
3210	*/
3211	SCR_FROM_REG (QU_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr0)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr0)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3212	0,
3213	SCR_JUMP0x80080000 ^ IFFALSE (MASK (QUIRK_AUTOSAVE, QUIRK_AUTOSAVE))(0x00080000 \| ((0x00040000 \| ((((0x01) ^ 0xff) & 0xff) << 8ul)\|(((0x01)) & 0xff)))),
3214	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
3215	/*
3216	** like SAVE_DP message:
3217	** Remember we saved the data pointer.
3218	** Copy data pointer to SAVEP in header.
3219	*/
3220	SCR_REG_REG (HF_REG, SCR_OR, HF_DP_SAVED)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| ((((1u<<3))&0xff)<<8ul)),
3221	0,
3222	SCR_STORE_REL (temp, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3223	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
3224	SCR_JUMP0x80080000,
3225	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
3226
3227	}/-------------------------< IDLE >------------------------/,{
3228	/*
3229	** Nothing to do?
3230	** Wait for reselect.
3231	** This NOP will be patched with LED OFF
3232	** SCR_REG_REG (gpreg, SCR_OR, 0x01)
3233	*/
3234	SCR_NO_OP0x80000000,
3235	0,
3236	#ifdef SCSI_NCR_IARB_SUPPORT
3237	SCR_JUMPR0x80880000,
3238	8,
3239	#endif
3240	}/-------------------------< UNGETJOB >-----------------/,{
3241	#ifdef SCSI_NCR_IARB_SUPPORT
3242	/*
3243	** Set IMMEDIATE ARBITRATION, for the next time.
3244	** This will give us better chance to win arbitration
3245	** for the job we just wanted to do.
3246	*/
3247	SCR_REG_REG (scntl1, SCR_OR, IARB)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl1)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl1)))) & 0x80))) \| (0x02000000 ) \| (((0x02)&0xff)<<8ul)),
3248	0,
3249	#endif
3250	/*
3251	** We are not able to restart the SCRIPTS if we are
3252	** interrupted and these instruction haven't been
3253	** all executed. BTW, this is very unlikely to
3254	** happen, but we check that from the C code.
3255	*/
3256	SCR_LOAD_REG (dsa, 0xff)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x00000000 ) \| (((0xff)&0xff)<<8ul)),
3257	0,
3258	SCR_STORE_ABS (scratcha, 4)(0xe0000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
3259	PADDRH (startpos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->startpos ))),
3260	}/-------------------------< RESELECT >--------------------/,{
3261	/*
3262	** make the host status invalid.
3263	*/
3264	SCR_CLR (SCR_TRG)(0x60000000 \| (0x00000200)),
3265	0,
3266	/*
3267	** Sleep waiting for a reselection.
3268	** If SIGP is set, special treatment.
3269	**
3270	** Zu allem bereit ..
3271	*/
3272	SCR_WAIT_RESEL0x50000000,
3273	PADDR(start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
3274	}/-------------------------< RESELECTED >------------------/,{
3275	/*
3276	** This NOP will be patched with LED ON
3277	** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
3278	*/
3279	SCR_NO_OP0x80000000,
3280	0,
3281	/*
3282	** load the target id into the sdid
3283	*/
3284	SCR_REG_SFBR (ssid, SCR_AND, 0x8F)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ssid)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_ssid)))) & 0x80))) \| (0x04000000 ) \| (((0x8F)&0xff)<<8ul)),
3285	0,
3286	SCR_TO_REG (sdid)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sdid)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_sdid)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3287	0,
3288	/*
3289	** load the target control block address
3290	*/
3291	SCR_LOAD_ABS (dsa, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul)) \| (4)),
3292	PADDRH (targtbl)(0x80000000 \| ((size_t) (&((struct scripth *)0)->targtbl ))),
3293	SCR_SFBR_REG (dsa, SCR_SHL, 0)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3294	0,
3295	SCR_REG_REG (dsa, SCR_SHL, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3296	0,
3297	SCR_REG_REG (dsa, SCR_AND, 0x3c)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x04000000 ) \| (((0x3c)&0xff)<<8ul)),
3298	0,
3299	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3300	0,
3301	/*
3302	** Load the synchronous transfer registers.
3303	*/
3304	SCR_LOAD_REL (scntl3, 1)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scntl3)))) & 0xff) << 16ul )) \| (1)),
3305	offsetof(struct tcb, wval)((size_t) (&((struct tcb *)0)->wval)),
3306	SCR_LOAD_REL (sxfer, 1)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_sxfer)))) & 0xff) << 16ul )) \| (1)),
3307	offsetof(struct tcb, sval)((size_t) (&((struct tcb *)0)->sval)),
3308	}/-------------------------< RESEL_SCNTL4 >------------------/,{
3309	/*
3310	** Write with uval value. Patch if device
3311	** does not support Ultra3.
3312	**
3313	** SCR_LOAD_REL (scntl4, 1),
3314	** offsetof(struct tcb, uval),
3315	*/
3316
3317	SCR_NO_OP0x80000000,
3318	0,
3319	/*
3320	* We expect MESSAGE IN phase.
3321	* If not, get help from the C code.
3322	*/
3323	SCR_INT0x98080000 ^ IFFALSE (WHEN (SCR_MSG_IN))(0x00080000 \| ((0x00030000 \| (0x07000000)))),
3324	SIR_RESEL_NO_MSG_IN(11),
3325	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
3326	NADDR (msgin)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin))),
3327
3328	/*
3329	* If IDENTIFY LUN #0, use a faster path
3330	* to find the LCB structure.
3331	*/
3332	SCR_JUMPR0x80880000 ^ IFTRUE (MASK (0x80, 0xbf))(0x00000000 \| ((0x00040000 \| (((0xbf ^ 0xff) & 0xff) << 8ul)\|((0x80) & 0xff)))),
3333	56,
3334	/*
3335	* If message isn't an IDENTIFY,
3336	* tell the C code about.
3337	*/
3338	SCR_INT0x98080000 ^ IFFALSE (MASK (0x80, 0x80))(0x00080000 \| ((0x00040000 \| (((0x80 ^ 0xff) & 0xff) << 8ul)\|((0x80) & 0xff)))),
3339	SIR_RESEL_NO_IDENTIFY(12),
3340	/*
3341	* It is an IDENTIFY message,
3342	* Load the LUN control block address.
3343	*/
3344	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3345	offsetof(struct tcb, b_luntbl)((size_t) (&((struct tcb *)0)->b_luntbl)),
3346	SCR_SFBR_REG (dsa, SCR_SHL, 0)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3347	0,
3348	SCR_REG_REG (dsa, SCR_SHL, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3349	0,
3350	SCR_REG_REG (dsa, SCR_AND, 0xfc)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x04000000 ) \| (((0xfc)&0xff)<<8ul)),
3351	0,
3352	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3353	0,
3354	SCR_JUMPR0x80880000,
3355	8,
3356	/*
3357	** LUN 0 special case (but usual one :))
3358	*/
3359	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3360	offsetof(struct tcb, b_lun0)((size_t) (&((struct tcb *)0)->b_lun0)),
3361
3362	/*
3363	** Load the reselect task action for this LUN.
3364	** Load the tasks DSA array for this LUN.
3365	** Call the action.
3366	*/
3367	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3368	offsetof(struct lcb, resel_task)((size_t) (&((struct lcb *)0)->resel_task)),
3369	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3370	offsetof(struct lcb, b_tasktbl)((size_t) (&((struct lcb *)0)->b_tasktbl)),
3371	SCR_RETURN0x90080000,
3372	0,
3373	}/-------------------------< RESEL_TAG >-------------------/,{
3374	/*
3375	** ACK the IDENTIFY or TAG previously received
3376	*/
3377
3378	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3379	0,
3380	/*
3381	** Read IDENTIFY + SIMPLE + TAG using a single MOVE.
3382	** Agressive optimization, is'nt it?
3383	** No need to test the SIMPLE TAG message, since the
3384	** driver only supports conformant devices for tags. ;-)
3385	*/
3386	SCR_MOVE_ABS (2)((0x00000000 \| 0x08000000) \| (2)) ^ SCR_MSG_IN0x07000000,
3387	NADDR (msgin)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin))),
3388	/*
3389	** Read the TAG from the SIDL.
3390	** Still an aggressive optimization. ;-)
3391	** Compute the CCB indirect jump address which
3392	** is (#TAG*2 & 0xfc) due to tag numbering using
3393	** 1,3,5..MAXTAGS*2+1 actual values.
3394	*/
3395	SCR_REG_SFBR (sidl, SCR_SHL, 0)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sidl)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_sidl)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3396	0,
3397	#if MAX_TASKS(256/4)*4 > 512
3398	SCR_JUMPR0x80880000 ^ IFFALSE (CARRYSET)(0x00080000 \| ((0x00200000))),
3399	8,
3400	SCR_REG_REG (dsa1, SCR_OR, 2)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_dsa1)))) & 0x80))) \| (0x02000000 ) \| (((2)&0xff)<<8ul)),
3401	0,
3402	SCR_REG_REG (sfbr, SCR_SHL, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sfbr)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_sfbr)))) & 0x80))) \| (0x01000000 ) \| (((0)&0xff)<<8ul)),
3403	0,
3404	SCR_JUMPR0x80880000 ^ IFFALSE (CARRYSET)(0x00080000 \| ((0x00200000))),
3405	8,
3406	SCR_REG_REG (dsa1, SCR_OR, 1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_dsa1)))) & 0x80))) \| (0x02000000 ) \| (((1)&0xff)<<8ul)),
3407	0,
3408	#elif MAX_TASKS(256/4)*4 > 256
3409	SCR_JUMPR0x80880000 ^ IFFALSE (CARRYSET)(0x00080000 \| ((0x00200000))),
3410	8,
3411	SCR_REG_REG (dsa1, SCR_OR, 1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_dsa1)))) & 0x80))) \| (0x02000000 ) \| (((1)&0xff)<<8ul)),
3412	0,
3413	#endif
3414	/*
3415	** Retrieve the DSA of this task.
3416	** JUMP indirectly to the restart point of the CCB.
3417	*/
3418	SCR_SFBR_REG (dsa, SCR_AND, 0xfc)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_dsa)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_dsa)))) & 0x80))) \| (0x04000000 ) \| (((0xfc)&0xff)<<8ul)),
3419	0,
3420	}/-------------------------< RESEL_GO >-------------------/,{
3421	SCR_LOAD_REL (dsa, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_dsa)))) & 0xff) << 16ul) ) \| (4)),
3422	0,
3423	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3424	offsetof(struct ccb, phys.header.go.restart)((size_t) (&((struct ccb *)0)->phys.header.go.restart) ),
3425	SCR_RETURN0x90080000,
3426	0,
3427	/* In normal situations we branch to RESEL_DSA */
3428	}/-------------------------< RESEL_NOTAG >-------------------/,{
3429	/*
3430	** JUMP indirectly to the restart point of the CCB.
3431	*/
3432	SCR_JUMP0x80080000,
3433	PADDR (resel_go)(0x50000000 \| ((size_t) (&((struct script *)0)->resel_go ))),
3434
3435	}/-------------------------< RESEL_DSA >-------------------/,{
3436	/*
3437	** Ack the IDENTIFY or TAG previously received.
3438	*/
3439	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3440	0,
3441	/*
3442	** load the savep (saved pointer) into
3443	** the actual data pointer.
3444	*/
3445	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3446	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
3447	/*
3448	** Initialize the status registers
3449	*/
3450	SCR_LOAD_REL (scr0, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)),
3451	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
3452	/*
3453	** Jump to dispatcher.
3454	*/
3455	SCR_JUMP0x80080000,
3456	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3457
3458	}/-------------------------< DATA_IN >--------------------/,{
3459	/*
3460	** Because the size depends on the
3461	** #define MAX_SCATTER parameter,
3462	** it is filled in at runtime.
3463	**
3464	** ##===========< i=0; i<MAX_SCATTER >=========
3465	** \|\| SCR_CHMOV_TBL ^ SCR_DATA_IN,
3466	** \|\| offsetof (struct dsb, data[ i]),
3467	** ##==========================================
3468	**
3469	**---------------------------------------------------------
3470	*/
3471	0
3472	}/-------------------------< DATA_IN2 >-------------------/,{
3473	SCR_CALL0x88080000,
3474	PADDR (datai_done)(0x50000000 \| ((size_t) (&((struct script *)0)->datai_done ))),
3475	SCR_JUMP0x80080000,
3476	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3477	}/-------------------------< DATA_OUT >--------------------/,{
3478	/*
3479	** Because the size depends on the
3480	** #define MAX_SCATTER parameter,
3481	** it is filled in at runtime.
3482	**
3483	** ##===========< i=0; i<MAX_SCATTER >=========
3484	** \|\| SCR_CHMOV_TBL ^ SCR_DATA_OUT,
3485	** \|\| offsetof (struct dsb, data[ i]),
3486	** ##==========================================
3487	**
3488	**---------------------------------------------------------
3489	*/
3490	0
3491	}/-------------------------< DATA_OUT2 >-------------------/,{
3492	SCR_CALL0x88080000,
3493	PADDR (datao_done)(0x50000000 \| ((size_t) (&((struct script *)0)->datao_done ))),
3494	SCR_JUMP0x80080000,
3495	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3496
3497	}/-------------------------< PM0_DATA >--------------------/,{
3498	/*
3499	** Read our host flags to SFBR, so we will be able
3500	** to check against the data direction we expect.
3501	*/
3502	SCR_FROM_REG (HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3503	0,
3504	/*
3505	** Check against actual DATA PHASE.
3506	*/
3507	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_DATA_IN))(0x00080000 \| ((0x00030000 \| (0x01000000)))),
3508	PADDR (pm0_data_out)(0x50000000 \| ((size_t) (&((struct script *)0)->pm0_data_out ))),
3509	/*
3510	** Actual phase is DATA IN.
3511	** Check against expected direction.
3512	*/
3513	SCR_JUMP0x80080000 ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN))(0x00080000 \| ((0x00040000 \| ((((1u<<5) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<5)) & 0xff)))),
3514	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3515	/*
3516	** Keep track we are moving data from the
3517	** PM0 DATA mini-script.
3518	*/
3519	SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((1u)&0xff)<<8ul)),
3520	0,
3521	/*
3522	** Move the data to memory.
3523	*/
3524	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000,
3525	offsetof (struct ccb, phys.pm0.sg)((size_t) (&((struct ccb *)0)->phys.pm0.sg)),
3526	SCR_JUMP0x80080000,
3527	PADDR (pm0_data_end)(0x50000000 \| ((size_t) (&((struct script *)0)->pm0_data_end ))),
3528	}/-------------------------< PM0_DATA_OUT >----------------/,{
3529	/*
3530	** Actual phase is DATA OUT.
3531	** Check against expected direction.
3532	*/
3533	SCR_JUMP0x80080000 ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN))(0x00000000 \| ((0x00040000 \| ((((1u<<5) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<5)) & 0xff)))),
3534	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3535	/*
3536	** Keep track we are moving data from the
3537	** PM0 DATA mini-script.
3538	*/
3539	SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((1u)&0xff)<<8ul)),
3540	0,
3541	/*
3542	** Move the data from memory.
3543	*/
3544	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_OUT0x00000000,
3545	offsetof (struct ccb, phys.pm0.sg)((size_t) (&((struct ccb *)0)->phys.pm0.sg)),
3546	}/-------------------------< PM0_DATA_END >----------------/,{
3547	/*
3548	** Clear the flag that told we were moving
3549	** data from the PM0 DATA mini-script.
3550	*/
3551	SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM0))(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x04000000 ) \| ((((~1u))&0xff)<<8ul)),
3552	0,
3553	/*
3554	** Return to the previous DATA script which
3555	** is guaranteed by design (if no bug) to be
3556	** the main DATA script for this transfer.
3557	*/
3558	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3559	offsetof (struct ccb, phys.pm0.ret)((size_t) (&((struct ccb *)0)->phys.pm0.ret)),
3560	SCR_RETURN0x90080000,
3561	0,
3562	}/-------------------------< PM1_DATA >--------------------/,{
3563	/*
3564	** Read our host flags to SFBR, so we will be able
3565	** to check against the data direction we expect.
3566	*/
3567	SCR_FROM_REG (HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3568	0,
3569	/*
3570	** Check against actual DATA PHASE.
3571	*/
3572	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_DATA_IN))(0x00080000 \| ((0x00030000 \| (0x01000000)))),
3573	PADDR (pm1_data_out)(0x50000000 \| ((size_t) (&((struct script *)0)->pm1_data_out ))),
3574	/*
3575	** Actual phase is DATA IN.
3576	** Check against expected direction.
3577	*/
3578	SCR_JUMP0x80080000 ^ IFFALSE (MASK (HF_DATA_IN, HF_DATA_IN))(0x00080000 \| ((0x00040000 \| ((((1u<<5) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<5)) & 0xff)))),
3579	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3580	/*
3581	** Keep track we are moving data from the
3582	** PM1 DATA mini-script.
3583	*/
3584	SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| ((((1u<<1))&0xff)<<8ul)),
3585	0,
3586	/*
3587	** Move the data to memory.
3588	*/
3589	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000,
3590	offsetof (struct ccb, phys.pm1.sg)((size_t) (&((struct ccb *)0)->phys.pm1.sg)),
3591	SCR_JUMP0x80080000,
3592	PADDR (pm1_data_end)(0x50000000 \| ((size_t) (&((struct script *)0)->pm1_data_end ))),
3593	}/-------------------------< PM1_DATA_OUT >----------------/,{
3594	/*
3595	** Actual phase is DATA OUT.
3596	** Check against expected direction.
3597	*/
3598	SCR_JUMP0x80080000 ^ IFTRUE (MASK (HF_DATA_IN, HF_DATA_IN))(0x00000000 \| ((0x00040000 \| ((((1u<<5) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<5)) & 0xff)))),
3599	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3600	/*
3601	** Keep track we are moving data from the
3602	** PM1 DATA mini-script.
3603	*/
3604	SCR_REG_REG (HF_REG, SCR_OR, HF_IN_PM1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| ((((1u<<1))&0xff)<<8ul)),
3605	0,
3606	/*
3607	** Move the data from memory.
3608	*/
3609	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_OUT0x00000000,
3610	offsetof (struct ccb, phys.pm1.sg)((size_t) (&((struct ccb *)0)->phys.pm1.sg)),
3611	}/-------------------------< PM1_DATA_END >----------------/,{
3612	/*
3613	** Clear the flag that told we were moving
3614	** data from the PM1 DATA mini-script.
3615	*/
3616	SCR_REG_REG (HF_REG, SCR_AND, (~HF_IN_PM1))(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x04000000 ) \| ((((~(1u<<1)))&0xff)<<8ul)),
3617	0,
3618	/*
3619	** Return to the previous DATA script which
3620	** is guaranteed by design (if no bug) to be
3621	** the main DATA script for this transfer.
3622	*/
3623	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3624	offsetof (struct ccb, phys.pm1.ret)((size_t) (&((struct ccb *)0)->phys.pm1.ret)),
3625	SCR_RETURN0x90080000,
3626	0,
3627	}/---------------------------------------------------------/
3628	};
3629
3630
3631	static struct scripth scripth0 __initdata = {
3632	/------------------------< START64 >-----------------------/{
3633	/*
3634	** SCRIPT entry point for the 895A and the 896.
3635	** For now, there is no specific stuff for that
3636	** chip at this point, but this may come.
3637	*/
3638	SCR_JUMP0x80080000,
3639	PADDR (init)(0x50000000 \| ((size_t) (&((struct script *)0)->init)) ),
3640	}/-------------------------< NO_DATA >-------------------/,{
3641	SCR_JUMP0x80080000,
3642	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
3643	}/-----------------------< SEL_FOR_ABORT >------------------/,{
3644	/*
3645	** We are jumped here by the C code, if we have
3646	** some target to reset or some disconnected
3647	** job to abort. Since error recovery is a serious
3648	** busyness, we will really reset the SCSI BUS, if
3649	** case of a SCSI interrupt occurring in this path.
3650	*/
3651
3652	/*
3653	** Set initiator mode.
3654	*/
3655	SCR_CLR (SCR_TRG)(0x60000000 \| (0x00000200)),
3656	0,
3657	/*
3658	** And try to select this target.
3659	*/
3660	SCR_SEL_TBL_ATN0x43000000 ^ offsetof (struct ncb, abrt_sel)((size_t) (&((struct ncb *)0)->abrt_sel)),
3661	PADDR (reselect)(0x50000000 \| ((size_t) (&((struct script *)0)->reselect ))),
3662
3663	/*
3664	** Wait for the selection to complete or
3665	** the selection to time out.
3666	*/
3667	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
3668	-8,
3669	/*
3670	** Call the C code.
3671	*/
3672	SCR_INT0x98080000,
3673	SIR_TARGET_SELECTED(14),
3674	/*
3675	** The C code should let us continue here.
3676	** Send the 'kiss of death' message.
3677	** We expect an immediate disconnect once
3678	** the target has eaten the message.
3679	*/
3680	SCR_REG_REG (scntl2, SCR_AND, 0x7f)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x04000000 ) \| (((0x7f)&0xff)<<8ul)),
3681	0,
3682	SCR_MOVE_TBL(0x10000000 \| 0x08000000) ^ SCR_MSG_OUT0x06000000,
3683	offsetof (struct ncb, abrt_tbl)((size_t) (&((struct ncb *)0)->abrt_tbl)),
3684	SCR_CLR (SCR_ACK\|SCR_ATN)(0x60000000 \| (0x00000040\|0x00000008)),
3685	0,
3686	SCR_WAIT_DISC0x48000000,
3687	0,
3688	/*
3689	** Tell the C code that we are done.
3690	*/
3691	SCR_INT0x98080000,
3692	SIR_ABORT_SENT(17),
3693	}/-----------------------< SEL_FOR_ABORT_1 >--------------/,{
3694	/*
3695	** Jump at scheduler.
3696	*/
3697	SCR_JUMP0x80080000,
3698	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
3699
3700	}/------------------------< SELECT_NO_ATN >-----------------/,{
3701	/*
3702	** Set Initiator mode.
3703	** And try to select this target without ATN.
3704	*/
3705
3706	SCR_CLR (SCR_TRG)(0x60000000 \| (0x00000200)),
3707	0,
3708	SCR_SEL_TBL0x42000000 ^ offsetof (struct dsb, select)((size_t) (&((struct dsb *)0)->select)),
3709	PADDR (ungetjob)(0x50000000 \| ((size_t) (&((struct script *)0)->ungetjob ))),
3710	/*
3711	** load the savep (saved pointer) into
3712	** the actual data pointer.
3713	*/
3714	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
3715	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
3716	/*
3717	** Initialize the status registers
3718	*/
3719	SCR_LOAD_REL (scr0, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scr0)))) & 0xff) << 16ul )) \| (4)),
3720	offsetof (struct ccb, phys.header.status)((size_t) (&((struct ccb *)0)->phys.header.status)),
3721
3722	}/------------------------< WF_SEL_DONE_NO_ATN >-----------------/,{
3723	/*
3724	** Wait immediately for the next phase or
3725	** the selection to complete or time-out.
3726	*/
3727	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
3728	0,
3729	SCR_JUMP0x80080000,
3730	PADDR (select2)(0x50000000 \| ((size_t) (&((struct script *)0)->select2 ))),
3731
3732	}/-------------------------< MSG_IN_ETC >--------------------/,{
3733	/*
3734	** If it is an EXTENDED (variable size message)
3735	** Handle it.
3736	*/
3737	SCR_JUMP0x80080000 ^ IFTRUE (DATA (M_EXTENDED))(0x00000000 \| ((0x00040000 \| (((0x01)) & 0xff)))),
3738	PADDRH (msg_extended)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_extended ))),
3739	/*
3740	** Let the C code handle any other
3741	** 1 byte message.
3742	*/
3743	SCR_JUMP0x80080000 ^ IFTRUE (MASK (0x00, 0xf0))(0x00000000 \| ((0x00040000 \| (((0xf0 ^ 0xff) & 0xff) << 8ul)\|((0x00) & 0xff)))),
3744	PADDRH (msg_received)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_received ))),
3745	SCR_JUMP0x80080000 ^ IFTRUE (MASK (0x10, 0xf0))(0x00000000 \| ((0x00040000 \| (((0xf0 ^ 0xff) & 0xff) << 8ul)\|((0x10) & 0xff)))),
3746	PADDRH (msg_received)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_received ))),
3747	/*
3748	** We donnot handle 2 bytes messages from SCRIPTS.
3749	** So, let the C code deal with these ones too.
3750	*/
3751	SCR_JUMP0x80080000 ^ IFFALSE (MASK (0x20, 0xf0))(0x00080000 \| ((0x00040000 \| (((0xf0 ^ 0xff) & 0xff) << 8ul)\|((0x20) & 0xff)))),
3752	PADDRH (msg_weird_seen)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_weird_seen ))),
3753	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3754	0,
3755	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
3756	NADDR (msgin[1])(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin[1]) )),
3757	SCR_JUMP0x80080000,
3758	PADDRH (msg_received)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_received ))),
3759
3760	}/-------------------------< MSG_RECEIVED >--------------------/,{
3761	SCR_LOAD_REL (scratcha, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg )0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)), / DUMMY READ */
3762	0,
3763	SCR_INT0x98080000,
3764	SIR_MSG_RECEIVED(3),
3765
3766	}/-------------------------< MSG_WEIRD_SEEN >------------------/,{
3767	SCR_LOAD_REL (scratcha1, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg )0)->nc_scratcha1)))) & 0xff) << 16ul)) \| (4)), / DUMMY READ */
3768	0,
3769	SCR_INT0x98080000,
3770	SIR_MSG_WEIRD(4),
3771
3772	}/-------------------------< MSG_EXTENDED >--------------------/,{
3773	/*
3774	** Clear ACK and get the next byte
3775	** assumed to be the message length.
3776	*/
3777	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3778	0,
3779	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
3780	NADDR (msgin[1])(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgin[1]) )),
3781	/*
3782	** Try to catch some unlikely situations as 0 length
3783	** or too large the length.
3784	*/
3785	SCR_JUMP0x80080000 ^ IFTRUE (DATA (0))(0x00000000 \| ((0x00040000 \| ((0) & 0xff)))),
3786	PADDRH (msg_weird_seen)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_weird_seen ))),
3787	SCR_TO_REG (scratcha)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3788	0,
3789	SCR_REG_REG (sfbr, SCR_ADD, (256-8))(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sfbr)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_sfbr)))) & 0x80))) \| (0x06000000 ) \| ((((256 -8))&0xff)<<8ul)),
3790	0,
3791	SCR_JUMP0x80080000 ^ IFTRUE (CARRYSET)(0x00000000 \| ((0x00200000))),
3792	PADDRH (msg_weird_seen)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_weird_seen ))),
3793	/*
3794	** We donnot handle extended messages from SCRIPTS.
3795	** Read the amount of data correponding to the
3796	** message length and call the C code.
3797	*/
3798	SCR_STORE_REL (scratcha, 1)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (1)),
3799	offsetof (struct dsb, smsg_ext.size)((size_t) (&((struct dsb *)0)->smsg_ext.size)),
3800	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3801	0,
3802	SCR_MOVE_TBL(0x10000000 \| 0x08000000) ^ SCR_MSG_IN0x07000000,
3803	offsetof (struct dsb, smsg_ext)((size_t) (&((struct dsb *)0)->smsg_ext)),
3804	SCR_JUMP0x80080000,
3805	PADDRH (msg_received)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_received ))),
3806
3807	}/-------------------------< MSG_BAD >------------------/,{
3808	/*
3809	** unimplemented message - reject it.
3810	*/
3811	SCR_INT0x98080000,
3812	SIR_REJECT_TO_SEND(8),
3813	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3814	0,
3815	SCR_JUMP0x80080000,
3816	PADDR (clrack)(0x50000000 \| ((size_t) (&((struct script *)0)->clrack ))),
3817
3818	}/-------------------------< MSG_WEIRD >--------------------/,{
3819	/*
3820	** weird message received
3821	** ignore all MSG IN phases and reject it.
3822	*/
3823	SCR_INT0x98080000,
3824	SIR_REJECT_TO_SEND(8),
3825	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3826	0,
3827	}/-------------------------< MSG_WEIRD1 >--------------------/,{
3828	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3829	0,
3830	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_MSG_IN))(0x00080000 \| ((0x00030000 \| (0x07000000)))),
3831	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3832	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_IN0x07000000,
3833	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
3834	SCR_JUMP0x80080000,
3835	PADDRH (msg_weird1)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_weird1 ))),
3836	}/-------------------------< WDTR_RESP >----------------/,{
3837	/*
3838	** let the target fetch our answer.
3839	*/
3840	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3841	0,
3842	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3843	0,
3844	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
3845	PADDRH (nego_bad_phase)(0x80000000 \| ((size_t) (&((struct scripth *)0)->nego_bad_phase ))),
3846
3847	}/-------------------------< SEND_WDTR >----------------/,{
3848	/*
3849	** Send the M_X_WIDE_REQ
3850	*/
3851	SCR_MOVE_ABS (4)((0x00000000 \| 0x08000000) \| (4)) ^ SCR_MSG_OUT0x06000000,
3852	NADDR (msgout)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgout))),
3853	SCR_JUMP0x80080000,
3854	PADDRH (msg_out_done)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_out_done ))),
3855
3856	}/-------------------------< SDTR_RESP >-------------/,{
3857	/*
3858	** let the target fetch our answer.
3859	*/
3860	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3861	0,
3862	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3863	0,
3864	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
3865	PADDRH (nego_bad_phase)(0x80000000 \| ((size_t) (&((struct scripth *)0)->nego_bad_phase ))),
3866
3867	}/-------------------------< SEND_SDTR >-------------/,{
3868	/*
3869	** Send the M_X_SYNC_REQ
3870	*/
3871	SCR_MOVE_ABS (5)((0x00000000 \| 0x08000000) \| (5)) ^ SCR_MSG_OUT0x06000000,
3872	NADDR (msgout)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgout))),
3873	SCR_JUMP0x80080000,
3874	PADDRH (msg_out_done)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_out_done ))),
3875
3876	}/-------------------------< PPR_RESP >-------------/,{
3877	/*
3878	** let the target fetch our answer.
3879	*/
3880	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3881	0,
3882	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3883	0,
3884	SCR_JUMP0x80080000 ^ IFFALSE (WHEN (SCR_MSG_OUT))(0x00080000 \| ((0x00030000 \| (0x06000000)))),
3885	PADDRH (nego_bad_phase)(0x80000000 \| ((size_t) (&((struct scripth *)0)->nego_bad_phase ))),
3886
3887	}/-------------------------< SEND_PPR >-------------/,{
3888	/*
3889	** Send the M_X_PPR_REQ
3890	*/
3891	SCR_MOVE_ABS (8)((0x00000000 \| 0x08000000) \| (8)) ^ SCR_MSG_OUT0x06000000,
3892	NADDR (msgout)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgout))),
3893	SCR_JUMP0x80080000,
3894	PADDRH (msg_out_done)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_out_done ))),
3895
3896	}/-------------------------< NEGO_BAD_PHASE >------------/,{
3897	SCR_INT0x98080000,
3898	SIR_NEGO_PROTO(6),
3899	SCR_JUMP0x80080000,
3900	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3901
3902	}/-------------------------< MSG_OUT >-------------------/,{
3903	/*
3904	** The target requests a message.
3905	*/
3906	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_OUT0x06000000,
3907	NADDR (msgout)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgout))),
3908	/*
3909	** ... wait for the next phase
3910	** if it's a message out, send it again, ...
3911	*/
3912	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_MSG_OUT))(0x00000000 \| ((0x00030000 \| (0x06000000)))),
3913	PADDRH (msg_out)(0x80000000 \| ((size_t) (&((struct scripth *)0)->msg_out ))),
3914	}/-------------------------< MSG_OUT_DONE >--------------/,{
3915	/*
3916	** ... else clear the message ...
3917	*/
3918	SCR_INT0x98080000,
3919	SIR_MSG_OUT_DONE(19),
3920	/*
3921	** ... and process the next phase
3922	*/
3923	SCR_JUMP0x80080000,
3924	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3925
3926	}/-------------------------< DATA_OVRUN >-----------------------/,{
3927	/*
3928	* Use scratcha to count the extra bytes.
3929	*/
3930	SCR_LOAD_ABS (scratcha, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
3931	PADDRH (zero)(0x80000000 \| ((size_t) (&((struct scripth *)0)->zero) )),
3932	}/-------------------------< DATA_OVRUN1 >----------------------/,{
3933	/*
3934	* The target may want to transfer too much data.
3935	*
3936	* If phase is DATA OUT write 1 byte and count it.
3937	*/
3938	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_DATA_OUT))(0x00080000 \| ((0x00030000 \| (0x00000000)))),
3939	16,
3940	SCR_CHMOV_ABS (1)((0x00000000) \| (1)) ^ SCR_DATA_OUT0x00000000,
3941	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
3942	SCR_JUMP0x80080000,
3943	PADDRH (data_ovrun2)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun2 ))),
3944	/*
3945	* If WSR is set, clear this condition, and
3946	* count this byte.
3947	*/
3948	SCR_FROM_REG (scntl2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
3949	0,
3950	SCR_JUMPR0x80880000 ^ IFFALSE (MASK (WSR, WSR))(0x00080000 \| ((0x00040000 \| (((0x01 ^ 0xff) & 0xff) << 8ul)\|((0x01) & 0xff)))),
3951	16,
3952	SCR_REG_REG (scntl2, SCR_OR, WSR)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0x01)&0xff)<<8ul)),
3953	0,
3954	SCR_JUMP0x80080000,
3955	PADDRH (data_ovrun2)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun2 ))),
3956	/*
3957	* Finally check against DATA IN phase.
3958	* Signal data overrun to the C code
3959	* and jump to dispatcher if not so.
3960	* Read 1 byte otherwise and count it.
3961	*/
3962	SCR_JUMPR0x80880000 ^ IFTRUE (WHEN (SCR_DATA_IN))(0x00000000 \| ((0x00030000 \| (0x01000000)))),
3963	16,
3964	SCR_INT0x98080000,
3965	SIR_DATA_OVERRUN(22),
3966	SCR_JUMP0x80080000,
3967	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
3968	SCR_CHMOV_ABS (1)((0x00000000) \| (1)) ^ SCR_DATA_IN0x01000000,
3969	NADDR (scratch)(0x40000000 \| ((size_t) (&((struct ncb *)0)->scratch)) ),
3970	}/-------------------------< DATA_OVRUN2 >----------------------/,{
3971	/*
3972	* Count this byte.
3973	* This will allow to return a negative
3974	* residual to user.
3975	*/
3976	SCR_REG_REG (scratcha, SCR_ADD, 0x01)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha)))) & 0x80))) \| (0x06000000 ) \| (((0x01)&0xff)<<8ul)),
3977	0,
3978	SCR_REG_REG (scratcha1, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha1)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha1)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
3979	0,
3980	SCR_REG_REG (scratcha2, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha2)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
3981	0,
3982	/*
3983	* .. and repeat as required.
3984	*/
3985	SCR_JUMP0x80080000,
3986	PADDRH (data_ovrun1)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun1 ))),
3987
3988	}/-------------------------< ABORT_RESEL >----------------/,{
3989	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
3990	0,
3991	SCR_CLR (SCR_ACK)(0x60000000 \| (0x00000040)),
3992	0,
3993	/*
3994	** send the abort/abortag/reset message
3995	** we expect an immediate disconnect
3996	*/
3997	SCR_REG_REG (scntl2, SCR_AND, 0x7f)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x04000000 ) \| (((0x7f)&0xff)<<8ul)),
3998	0,
3999	SCR_MOVE_ABS (1)((0x00000000 \| 0x08000000) \| (1)) ^ SCR_MSG_OUT0x06000000,
4000	NADDR (msgout)(0x40000000 \| ((size_t) (&((struct ncb *)0)->msgout))),
4001	SCR_CLR (SCR_ACK\|SCR_ATN)(0x60000000 \| (0x00000040\|0x00000008)),
4002	0,
4003	SCR_WAIT_DISC0x48000000,
4004	0,
4005	SCR_INT0x98080000,
4006	SIR_RESEL_ABORTED(18),
4007	SCR_JUMP0x80080000,
4008	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
4009	}/-------------------------< RESEND_IDENT >-------------------/,{
4010	/*
4011	** The target stays in MSG OUT phase after having acked
4012	** Identify [+ Tag [+ Extended message ]]. Targets shall
4013	** behave this way on parity error.
4014	** We must send it again all the messages.
4015	*/
4016	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)), /* Shall be asserted 2 deskew delays before the */
4017	0, /* 1rst ACK = 90 ns. Hope the NCR is'nt too fast */
4018	SCR_JUMP0x80080000,
4019	PADDR (send_ident)(0x50000000 \| ((size_t) (&((struct script *)0)->send_ident ))),
4020	}/-------------------------< IDENT_BREAK >-------------------/,{
4021	SCR_CLR (SCR_ATN)(0x60000000 \| (0x00000008)),
4022	0,
4023	SCR_JUMP0x80080000,
4024	PADDR (select2)(0x50000000 \| ((size_t) (&((struct script *)0)->select2 ))),
4025	}/-------------------------< IDENT_BREAK_ATN >----------------/,{
4026	SCR_SET (SCR_ATN)(0x58000000 \| (0x00000008)),
4027	0,
4028	SCR_JUMP0x80080000,
4029	PADDR (select2)(0x50000000 \| ((size_t) (&((struct script *)0)->select2 ))),
4030	}/-------------------------< SDATA_IN >-------------------/,{
4031	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000,
4032	offsetof (struct dsb, sense)((size_t) (&((struct dsb *)0)->sense)),
4033	SCR_CALL0x88080000,
4034	PADDR (datai_done)(0x50000000 \| ((size_t) (&((struct script *)0)->datai_done ))),
4035	SCR_JUMP0x80080000,
4036	PADDRH (data_ovrun)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_ovrun ))),
4037	}/-------------------------< DATA_IO >--------------------/,{
4038	/*
4039	** We jump here if the data direction was unknown at the
4040	** time we had to queue the command to the scripts processor.
4041	** Pointers had been set as follow in this situation:
4042	** savep --> DATA_IO
4043	** lastp --> start pointer when DATA_IN
4044	** goalp --> goal pointer when DATA_IN
4045	** wlastp --> start pointer when DATA_OUT
4046	** wgoalp --> goal pointer when DATA_OUT
4047	** This script sets savep/lastp/goalp according to the
4048	** direction chosen by the target.
4049	*/
4050	SCR_JUMP0x80080000 ^ IFTRUE (WHEN (SCR_DATA_OUT))(0x00000000 \| ((0x00030000 \| (0x00000000)))),
4051	PADDRH(data_io_out)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_io_out ))),
4052	}/-------------------------< DATA_IO_COM >-----------------/,{
4053	/*
4054	** Direction is DATA IN.
4055	** Warning: we jump here, even when phase is DATA OUT.
4056	*/
4057	SCR_LOAD_REL (scratcha, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4058	offsetof (struct ccb, phys.header.lastp)((size_t) (&((struct ccb *)0)->phys.header.lastp)),
4059	SCR_STORE_REL (scratcha, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4060	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
4061
4062	/*
4063	** Jump to the SCRIPTS according to actual direction.
4064	*/
4065	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
4066	offsetof (struct ccb, phys.header.savep)((size_t) (&((struct ccb *)0)->phys.header.savep)),
4067	SCR_RETURN0x90080000,
4068	0,
4069	}/-------------------------< DATA_IO_OUT >-----------------/,{
4070	/*
4071	** Direction is DATA OUT.
4072	*/
4073	SCR_REG_REG (HF_REG, SCR_AND, (~HF_DATA_IN))(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x04000000 ) \| ((((~(1u<<5)))&0xff)<<8ul)),
4074	0,
4075	SCR_LOAD_REL (scratcha, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4076	offsetof (struct ccb, phys.header.wlastp)((size_t) (&((struct ccb *)0)->phys.header.wlastp)),
4077	SCR_STORE_REL (scratcha, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4078	offsetof (struct ccb, phys.header.lastp)((size_t) (&((struct ccb *)0)->phys.header.lastp)),
4079	SCR_LOAD_REL (scratcha, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4080	offsetof (struct ccb, phys.header.wgoalp)((size_t) (&((struct ccb *)0)->phys.header.wgoalp)),
4081	SCR_STORE_REL (scratcha, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4082	offsetof (struct ccb, phys.header.goalp)((size_t) (&((struct ccb *)0)->phys.header.goalp)),
4083	SCR_JUMP0x80080000,
4084	PADDRH(data_io_com)(0x80000000 \| ((size_t) (&((struct scripth *)0)->data_io_com ))),
4085
4086	}/-------------------------< RESEL_BAD_LUN >---------------/,{
4087	/*
4088	** Message is an IDENTIFY, but lun is unknown.
4089	** Signal problem to C code for logging the event.
4090	** Send a M_ABORT to clear all pending tasks.
4091	*/
4092	SCR_INT0x98080000,
4093	SIR_RESEL_BAD_LUN(13),
4094	SCR_JUMP0x80080000,
4095	PADDRH (abort_resel)(0x80000000 \| ((size_t) (&((struct scripth *)0)->abort_resel ))),
4096	}/-------------------------< BAD_I_T_L >------------------/,{
4097	/*
4098	** We donnot have a task for that I_T_L.
4099	** Signal problem to C code for logging the event.
4100	** Send a M_ABORT message.
4101	*/
4102	SCR_INT0x98080000,
4103	SIR_RESEL_BAD_I_T_L(15),
4104	SCR_JUMP0x80080000,
4105	PADDRH (abort_resel)(0x80000000 \| ((size_t) (&((struct scripth *)0)->abort_resel ))),
4106	}/-------------------------< BAD_I_T_L_Q >----------------/,{
4107	/*
4108	** We donnot have a task that matches the tag.
4109	** Signal problem to C code for logging the event.
4110	** Send a M_ABORTTAG message.
4111	*/
4112	SCR_INT0x98080000,
4113	SIR_RESEL_BAD_I_T_L_Q(16),
4114	SCR_JUMP0x80080000,
4115	PADDRH (abort_resel)(0x80000000 \| ((size_t) (&((struct scripth *)0)->abort_resel ))),
4116	}/-------------------------< BAD_STATUS >-----------------/,{
4117	/*
4118	** Anything different from INTERMEDIATE
4119	** CONDITION MET should be a bad SCSI status,
4120	** given that GOOD status has already been tested.
4121	** Call the C code.
4122	*/
4123	SCR_LOAD_ABS (scratcha, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
4124	PADDRH (startpos)(0x80000000 \| ((size_t) (&((struct scripth *)0)->startpos ))),
4125	SCR_INT0x98080000 ^ IFFALSE (DATA (S_COND_MET))(0x00080000 \| ((0x00040000 \| (((0x04)) & 0xff)))),
4126	SIR_BAD_STATUS(1),
4127	SCR_RETURN0x90080000,
4128	0,
4129
4130	}/-------------------------< TWEAK_PMJ >------------------/,{
4131	/*
4132	** Disable PM handling from SCRIPTS for the data phase
4133	** and so force PM to be handled from C code if HF_PM_TO_C
4134	** flag is set.
4135	*/
4136	SCR_FROM_REG(HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4137	0,
4138	SCR_JUMPR0x80880000 ^ IFTRUE (MASK (HF_PM_TO_C, HF_PM_TO_C))(0x00000000 \| ((0x00040000 \| ((((1u<<6) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<6)) & 0xff)))),
4139	16,
4140	SCR_REG_REG (ccntl0, SCR_OR, ENPMJ)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ccntl0)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_ccntl0)))) & 0x80))) \| (0x02000000 ) \| (((0x80)&0xff)<<8ul)),
4141	0,
4142	SCR_RETURN0x90080000,
4143	0,
4144	SCR_REG_REG (ccntl0, SCR_AND, (~ENPMJ))(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ccntl0)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_ccntl0)))) & 0x80))) \| (0x04000000 ) \| ((((~0x80))&0xff)<<8ul)),
4145	0,
4146	SCR_RETURN0x90080000,
4147	0,
4148
4149	}/-------------------------< PM_HANDLE >------------------/,{
4150	/*
4151	** Phase mismatch handling.
4152	**
4153	** Since we have to deal with 2 SCSI data pointers
4154	** (current and saved), we need at least 2 contexts.
4155	** Each context (pm0 and pm1) has a saved area, a
4156	** SAVE mini-script and a DATA phase mini-script.
4157	*/
4158	/*
4159	** Get the PM handling flags.
4160	*/
4161	SCR_FROM_REG (HF_REG)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4162	0,
4163	/*
4164	** If no flags (1rst PM for example), avoid
4165	** all the below heavy flags testing.
4166	** This makes the normal case a bit faster.
4167	*/
4168	SCR_JUMP0x80080000 ^ IFTRUE (MASK (0, (HF_IN_PM0 \| HF_IN_PM1 \| HF_DP_SAVED)))(0x00000000 \| ((0x00040000 \| ((((1u \| (1u<<1) \| (1u<< 3)) ^ 0xff) & 0xff) << 8ul)\|((0) & 0xff)))),
4169	PADDRH (pm_handle1)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_handle1 ))),
4170	/*
4171	** If we received a SAVE DP, switch to the
4172	** other PM context since the savep may point
4173	** to the current PM context.
4174	*/
4175	SCR_JUMPR0x80880000 ^ IFFALSE (MASK (HF_DP_SAVED, HF_DP_SAVED))(0x00080000 \| ((0x00040000 \| ((((1u<<3) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<3)) & 0xff)))),
4176	8,
4177	SCR_REG_REG (sfbr, SCR_XOR, HF_ACT_PM)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_sfbr)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_sfbr)))) & 0x80))) \| (0x03000000 ) \| ((((1u<<2))&0xff)<<8ul)),
4178	0,
4179	/*
4180	** If we have been interrupt in a PM DATA mini-script,
4181	** we take the return address from the corresponding
4182	** saved area.
4183	** This ensure the return address always points to the
4184	** main DATA script for this transfer.
4185	*/
4186	SCR_JUMP0x80080000 ^ IFTRUE (MASK (0, (HF_IN_PM0 \| HF_IN_PM1)))(0x00000000 \| ((0x00040000 \| ((((1u \| (1u<<1)) ^ 0xff) & 0xff) << 8ul)\|((0) & 0xff)))),
4187	PADDRH (pm_handle1)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_handle1 ))),
4188	SCR_JUMPR0x80880000 ^ IFFALSE (MASK (HF_IN_PM0, HF_IN_PM0))(0x00080000 \| ((0x00040000 \| (((1u ^ 0xff) & 0xff) << 8ul)\|((1u) & 0xff)))),
4189	16,
4190	SCR_LOAD_REL (ia, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ia)))) & 0xff) << 16ul)) \| (4)),
4191	offsetof(struct ccb, phys.pm0.ret)((size_t) (&((struct ccb *)0)->phys.pm0.ret)),
4192	SCR_JUMP0x80080000,
4193	PADDRH (pm_save)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_save ))),
4194	SCR_LOAD_REL (ia, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ia)))) & 0xff) << 16ul)) \| (4)),
4195	offsetof(struct ccb, phys.pm1.ret)((size_t) (&((struct ccb *)0)->phys.pm1.ret)),
4196	SCR_JUMP0x80080000,
4197	PADDRH (pm_save)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_save ))),
4198	}/-------------------------< PM_HANDLE1 >-----------------/,{
4199	/*
4200	** Normal case.
4201	** Update the return address so that it
4202	** will point after the interrupted MOVE.
4203	*/
4204	SCR_REG_REG (ia, SCR_ADD, 8)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ia)))) & 0x7f) << 16ul) + (((((size_t) (&((struct ncr_reg )0)->nc_ia)))) & 0x80))) \| (0x06000000) \| (( (8)&0xff)<<8ul)),
4205	0,
4206	SCR_REG_REG (ia1, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ia1)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_ia1)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
4207	0,
4208	}/-------------------------< PM_SAVE >--------------------/,{
4209	/*
4210	** Clear all the flags that told us if we were
4211	** interrupted in a PM DATA mini-script and/or
4212	** we received a SAVE DP.
4213	*/
4214	SCR_SFBR_REG (HF_REG, SCR_AND, (~(HF_IN_PM0\|HF_IN_PM1\|HF_DP_SAVED)))(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scr3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_scr3)))) & 0x80))) \| (0x04000000 ) \| ((((~(1u\|(1u<<1)\|(1u<<3))))&0xff)<< 8ul)),
4215	0,
4216	/*
4217	** Choose the current PM context.
4218	*/
4219	SCR_JUMP0x80080000 ^ IFTRUE (MASK (HF_ACT_PM, HF_ACT_PM))(0x00000000 \| ((0x00040000 \| ((((1u<<2) ^ 0xff) & 0xff ) << 8ul)\|(((1u<<2)) & 0xff)))),
4220	PADDRH (pm1_save)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm1_save ))),
4221	}/-------------------------< PM0_SAVE >-------------------/,{
4222	SCR_STORE_REL (ia, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ia)))) & 0xff) << 16ul)) \| (4)),
4223	offsetof(struct ccb, phys.pm0.ret)((size_t) (&((struct ccb *)0)->phys.pm0.ret)),
4224	/*
4225	** If WSR bit is set, either UA and RBC may
4226	** have to be changed whatever the device wants
4227	** to ignore this residue ot not.
4228	*/
4229	SCR_FROM_REG (scntl2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4230	0,
4231	SCR_CALL0x88080000 ^ IFTRUE (MASK (WSR, WSR))(0x00000000 \| ((0x00040000 \| (((0x01 ^ 0xff) & 0xff) << 8ul)\|((0x01) & 0xff)))),
4232	PADDRH (pm_wsr_handle)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_wsr_handle ))),
4233	/*
4234	** Save the remaining byte count, the updated
4235	** address and the return address.
4236	*/
4237	SCR_STORE_REL (rbc, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_rbc)))) & 0xff) << 16ul) ) \| (4)),
4238	offsetof(struct ccb, phys.pm0.sg.size)((size_t) (&((struct ccb *)0)->phys.pm0.sg.size)),
4239	SCR_STORE_REL (ua, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ua)))) & 0xff) << 16ul)) \| (4)),
4240	offsetof(struct ccb, phys.pm0.sg.addr)((size_t) (&((struct ccb *)0)->phys.pm0.sg.addr)),
4241	/*
4242	** Set the current pointer at the PM0 DATA mini-script.
4243	*/
4244	SCR_LOAD_ABS (temp, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul)) \| (4)),
4245	PADDRH (pm0_data_addr)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm0_data_addr ))),
4246	SCR_JUMP0x80080000,
4247	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
4248	}/-------------------------< PM1_SAVE >-------------------/,{
4249	SCR_STORE_REL (ia, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ia)))) & 0xff) << 16ul)) \| (4)),
4250	offsetof(struct ccb, phys.pm1.ret)((size_t) (&((struct ccb *)0)->phys.pm1.ret)),
4251	/*
4252	** If WSR bit is set, either UA and RBC may
4253	** have been changed whatever the device wants
4254	** to ignore this residue or not.
4255	*/
4256	SCR_FROM_REG (scntl2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl2)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4257	0,
4258	SCR_CALL0x88080000 ^ IFTRUE (MASK (WSR, WSR))(0x00000000 \| ((0x00040000 \| (((0x01 ^ 0xff) & 0xff) << 8ul)\|((0x01) & 0xff)))),
4259	PADDRH (pm_wsr_handle)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm_wsr_handle ))),
4260	/*
4261	** Save the remaining byte count, the updated
4262	** address and the return address.
4263	*/
4264	SCR_STORE_REL (rbc, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_rbc)))) & 0xff) << 16ul) ) \| (4)),
4265	offsetof(struct ccb, phys.pm1.sg.size)((size_t) (&((struct ccb *)0)->phys.pm1.sg.size)),
4266	SCR_STORE_REL (ua, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ua)))) & 0xff) << 16ul)) \| (4)),
4267	offsetof(struct ccb, phys.pm1.sg.addr)((size_t) (&((struct ccb *)0)->phys.pm1.sg.addr)),
4268	/*
4269	** Set the current pointer at the PM1 DATA mini-script.
4270	*/
4271	SCR_LOAD_ABS (temp, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul)) \| (4)),
4272	PADDRH (pm1_data_addr)(0x80000000 \| ((size_t) (&((struct scripth *)0)->pm1_data_addr ))),
4273	SCR_JUMP0x80080000,
4274	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
4275	}/--------------------------< PM_WSR_HANDLE >-----------------------/,{
4276	/*
4277	* Phase mismatch handling from SCRIPT with WSR set.
4278	* Such a condition can occur if the chip wants to
4279	* execute a CHMOV(size > 1) when the WSR bit is
4280	* set and the target changes PHASE.
4281	*/
4282	#ifdef SYM_DEBUG_PM_WITH_WSR
4283	/*
4284	* Some debugging may still be needed.:)
4285	*/
4286	SCR_INT0x98080000,
4287	SIR_PM_WITH_WSR,
4288	#endif
4289	/*
4290	* We must move the residual byte to memory.
4291	*
4292	* UA contains bit 0..31 of the address to
4293	* move the residual byte.
4294	* Move it to the table indirect.
4295	*/
4296	SCR_STORE_REL (ua, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_ua)))) & 0xff) << 16ul)) \| (4)),
4297	offsetof (struct ccb, phys.wresid.addr)((size_t) (&((struct ccb *)0)->phys.wresid.addr)),
4298	/*
4299	* Increment UA (move address to next position).
4300	*/
4301	SCR_REG_REG (ua, SCR_ADD, 1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ua)))) & 0x7f) << 16ul) + (((((size_t) (&((struct ncr_reg )0)->nc_ua)))) & 0x80))) \| (0x06000000) \| (( (1)&0xff)<<8ul)),
4302	0,
4303	SCR_REG_REG (ua1, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ua1)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_ua1)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
4304	0,
4305	SCR_REG_REG (ua2, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ua2)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_ua2)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
4306	0,
4307	SCR_REG_REG (ua3, SCR_ADDC, 0)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_ua3)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_ua3)))) & 0x80))) \| (0x07000000 ) \| (((0)&0xff)<<8ul)),
4308	0,
4309	/*
4310	* Compute SCRATCHA as:
4311	* - size to transfer = 1 byte.
4312	* - bit 24..31 = high address bit [32...39].
4313	*/
4314	SCR_LOAD_ABS (scratcha, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul)) \| (4)),
4315	PADDRH (zero)(0x80000000 \| ((size_t) (&((struct scripth *)0)->zero) )),
4316	SCR_REG_REG (scratcha, SCR_OR, 1)(0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha)))) & 0x80))) \| (0x02000000 ) \| (((1)&0xff)<<8ul)),
4317	0,
4318	SCR_FROM_REG (rbc3)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_rbc3)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_rbc3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4319	0,
4320	SCR_TO_REG (scratcha3)(0x68000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scratcha3)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scratcha3)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4321	0,
4322	/*
4323	* Move this value to the table indirect.
4324	*/
4325	SCR_STORE_REL (scratcha, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4326	offsetof (struct ccb, phys.wresid.size)((size_t) (&((struct ccb *)0)->phys.wresid.size)),
4327	/*
4328	* Wait for a valid phase.
4329	* While testing with bogus QUANTUM drives, the C1010
4330	* sometimes raised a spurious phase mismatch with
4331	* WSR and the CHMOV(1) triggered another PM.
4332	* Waiting explicitely for the PHASE seemed to avoid
4333	* the nested phase mismatch. Btw, this didn't happen
4334	* using my IBM drives.
4335	*/
4336	SCR_JUMPR0x80880000 ^ IFFALSE (WHEN (SCR_DATA_IN))(0x00080000 \| ((0x00030000 \| (0x01000000)))),
4337	0,
4338	/*
4339	* Perform the move of the residual byte.
4340	*/
4341	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000,
4342	offsetof (struct ccb, phys.wresid)((size_t) (&((struct ccb *)0)->phys.wresid)),
4343	/*
4344	* We can now handle the phase mismatch with UA fixed.
4345	* RBC[0..23]=0 is a special case that does not require
4346	* a PM context. The C code also checks against this.
4347	*/
4348	SCR_FROM_REG (rbc)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_rbc)))) & 0x7f) << 16ul) + (((((size_t) (&(( struct ncr_reg )0)->nc_rbc)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4349	0,
4350	SCR_RETURN0x90080000 ^ IFFALSE (DATA (0))(0x00080000 \| ((0x00040000 \| ((0) & 0xff)))),
4351	0,
4352	SCR_FROM_REG (rbc1)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_rbc1)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_rbc1)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4353	0,
4354	SCR_RETURN0x90080000 ^ IFFALSE (DATA (0))(0x00080000 \| ((0x00040000 \| ((0) & 0xff)))),
4355	0,
4356	SCR_FROM_REG (rbc2)(0x70000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_rbc2)))) & 0x7f) << 16ul) + (((((size_t) (&( (struct ncr_reg )0)->nc_rbc2)))) & 0x80))) \| (0x02000000 ) \| (((0)&0xff)<<8ul)),
4357	0,
4358	SCR_RETURN0x90080000 ^ IFFALSE (DATA (0))(0x00080000 \| ((0x00040000 \| ((0) & 0xff)))),
4359	0,
4360	/*
4361	* RBC[0..23]=0.
4362	* Not only we donnot need a PM context, but this would
4363	* lead to a bogus CHMOV(0). This condition means that
4364	* the residual was the last byte to move from this CHMOV.
4365	* So, we just have to move the current data script pointer
4366	* (i.e. TEMP) to the SCRIPTS address following the
4367	* interrupted CHMOV and jump to dispatcher.
4368	*/
4369	SCR_STORE_ABS (ia, 4)(0xe0000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_ia)))) & 0xff) << 16ul)) \| (4)),
4370	PADDRH (scratch)(0x80000000 \| ((size_t) (&((struct scripth *)0)->scratch ))),
4371	SCR_LOAD_ABS (temp, 4)(0xe1000000 \| 0x02000000 \| (((((((size_t) (&((struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul)) \| (4)),
4372	PADDRH (scratch)(0x80000000 \| ((size_t) (&((struct scripth *)0)->scratch ))),
4373	SCR_JUMP0x80080000,
4374	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
4375	}/--------------------------< WSR_MA_HELPER >-----------------------/,{
4376	/*
4377	* Helper for the C code when WSR bit is set.
4378	* Perform the move of the residual byte.
4379	*/
4380	SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000,
4381	offsetof (struct ccb, phys.wresid)((size_t) (&((struct ccb *)0)->phys.wresid)),
4382	SCR_JUMP0x80080000,
4383	PADDR (dispatch)(0x50000000 \| ((size_t) (&((struct script *)0)->dispatch ))),
4384	}/-------------------------< ZERO >------------------------/,{
4385	SCR_DATA_ZERO0xf00ff00f,
4386	}/-------------------------< SCRATCH >---------------------/,{
4387	SCR_DATA_ZERO0xf00ff00f,
4388	}/-------------------------< SCRATCH1 >--------------------/,{
4389	SCR_DATA_ZERO0xf00ff00f,
4390	}/-------------------------< PM0_DATA_ADDR >---------------/,{
4391	SCR_DATA_ZERO0xf00ff00f,
4392	}/-------------------------< PM1_DATA_ADDR >---------------/,{
4393	SCR_DATA_ZERO0xf00ff00f,
4394	}/-------------------------< SAVED_DSA >-------------------/,{
4395	SCR_DATA_ZERO0xf00ff00f,
4396	}/-------------------------< SAVED_DRS >-------------------/,{
4397	SCR_DATA_ZERO0xf00ff00f,
4398	}/-------------------------< DONE_POS >--------------------/,{
4399	SCR_DATA_ZERO0xf00ff00f,
4400	}/-------------------------< STARTPOS >--------------------/,{
4401	SCR_DATA_ZERO0xf00ff00f,
4402	}/-------------------------< TARGTBL >---------------------/,{
4403	SCR_DATA_ZERO0xf00ff00f,
4404
4405
4406	/*
4407	** We may use MEMORY MOVE instructions to load the on chip-RAM,
4408	** if it happens that mapping PCI memory is not possible.
4409	** But writing the RAM from the CPU is the preferred method,
4410	** since PCI 2.2 seems to disallow PCI self-mastering.
4411	*/
4412
4413	#ifdef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
4414
4415	}/-------------------------< START_RAM >-------------------/,{
4416	/*
4417	** Load the script into on-chip RAM,
4418	** and jump to start point.
4419	*/
4420	SCR_COPY (sizeof (struct script))(0xc0000000 \| 0x01000000 \| (sizeof (struct script))),
4421	}/-------------------------< SCRIPT0_BA >--------------------/,{
4422	0,
4423	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
4424	SCR_JUMP0x80080000,
4425	PADDR (init)(0x50000000 \| ((size_t) (&((struct script *)0)->init)) ),
4426
4427	}/-------------------------< START_RAM64 >--------------------/,{
4428	/*
4429	** Load the RAM and start for 64 bit PCI (895A,896).
4430	** Both scripts (script and scripth) are loaded into
4431	** the RAM which is 8K (4K for 825A/875/895).
4432	** We also need to load some 32-63 bit segments
4433	** address of the SCRIPTS processor.
4434	** LOAD/STORE ABSOLUTE always refers to on-chip RAM
4435	** in our implementation. The main memory is
4436	** accessed using LOAD/STORE DSA RELATIVE.
4437	*/
4438	SCR_LOAD_REL (mmws, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_mmws)))) & 0xff) << 16ul )) \| (4)),
4439	offsetof (struct ncb, scr_ram_seg)((size_t) (&((struct ncb *)0)->scr_ram_seg)),
4440	SCR_COPY (sizeof(struct script))(0xc0000000 \| 0x01000000 \| (sizeof(struct script))),
4441	}/-------------------------< SCRIPT0_BA64 >--------------------/,{
4442	0,
4443	PADDR (start)(0x50000000 \| ((size_t) (&((struct script *)0)->start) )),
4444	SCR_COPY (sizeof(struct scripth))(0xc0000000 \| 0x01000000 \| (sizeof(struct scripth))),
4445	}/-------------------------< SCRIPTH0_BA64 >--------------------/,{
4446	0,
4447	PADDRH (start64)(0x80000000 \| ((size_t) (&((struct scripth *)0)->start64 ))),
4448	SCR_LOAD_REL (mmrs, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_mmrs)))) & 0xff) << 16ul )) \| (4)),
4449	offsetof (struct ncb, scr_ram_seg)((size_t) (&((struct ncb *)0)->scr_ram_seg)),
4450	SCR_JUMP640x80480000,
4451	PADDRH (start64)(0x80000000 \| ((size_t) (&((struct scripth *)0)->start64 ))),
4452	}/-------------------------< RAM_SEG64 >--------------------/,{
4453	0,
4454
4455	#endif /* SCSI_NCR_PCI_MEM_NOT_SUPPORTED */
4456
4457	}/-------------------------< SNOOPTEST >-------------------/,{
4458	/*
4459	** Read the variable.
4460	*/
4461	SCR_LOAD_REL (scratcha, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_scratcha)))) & 0xff) << 16ul )) \| (4)),
4462	offsetof(struct ncb, ncr_cache)((size_t) (&((struct ncb *)0)->ncr_cache)),
4463	SCR_STORE_REL (temp, 4)(0xe0000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
4464	offsetof(struct ncb, ncr_cache)((size_t) (&((struct ncb *)0)->ncr_cache)),
4465	SCR_LOAD_REL (temp, 4)(0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&(( struct ncr_reg *)0)->nc_temp)))) & 0xff) << 16ul )) \| (4)),
4466	offsetof(struct ncb, ncr_cache)((size_t) (&((struct ncb *)0)->ncr_cache)),
4467	}/-------------------------< SNOOPEND >-------------------/,{
4468	/*
4469	** And stop.
4470	*/
4471	SCR_INT0x98080000,
4472	99,
4473	}/--------------------------------------------------------/
4474	};
4475
4476	/*==========================================================
4477	**
4478	**
4479	** Fill in #define dependent parts of the script
4480	**
4481	**
4482	**==========================================================
4483	*/
4484
4485	void __init ncr_script_fill (struct script * scr, struct scripth * scrh)
4486	{
4487	int i;
4488	ncrcmd *p;
4489
4490	p = scr->data_in;
4491	for (i=0; i<MAX_SCATTER((127)); i++) {
4492	*p++ =SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_IN0x01000000;
4493	p++ =offsetof (struct dsb, data[i])((size_t) (&((struct dsb )0)->data[i]));
4494	};
4495
4496	assert ((u_long)p == (u_long)&scr->data_in + sizeof (scr->data_in)){ if (!((unsigned long)p == (unsigned long)&scr->data_in + sizeof (scr->data_in))) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "(u_long)p == (u_long)&scr->data_in + sizeof (scr->data_in)" , "../linux/src/drivers/scsi/sym53c8xx.c", 4496); } };
4497
4498	p = scr->data_out;
4499
4500	for (i=0; i<MAX_SCATTER((127)); i++) {
4501	*p++ =SCR_CHMOV_TBL(0x10000000) ^ SCR_DATA_OUT0x00000000;
4502	p++ =offsetof (struct dsb, data[i])((size_t) (&((struct dsb )0)->data[i]));
4503	};
4504
4505	assert ((u_long)p == (u_long)&scr->data_out + sizeof (scr->data_out)){ if (!((unsigned long)p == (unsigned long)&scr->data_out + sizeof (scr->data_out))) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "(u_long)p == (u_long)&scr->data_out + sizeof (scr->data_out)" , "../linux/src/drivers/scsi/sym53c8xx.c", 4505); } };
4506	}
4507
4508	/*==========================================================
4509	**
4510	**
4511	** Copy and rebind a script.
4512	**
4513	**
4514	**==========================================================
4515	*/
4516
4517	static void __init
4518	ncr_script_copy_and_bind (ncb_p np,ncrcmd src,ncrcmd dst,int len)
4519	{
4520	ncrcmd opcode, new, old, tmp1, tmp2;
4521	ncrcmd start, end;
4522	int relocs;
4523	int opchanged = 0;
4524
4525	start = src;
4526	end = src + len/4;
4527
4528	while (src < end) {
4529
4530	opcode = *src++;
4531	*dst++ = cpu_to_scr(opcode)(opcode);
4532
4533	/*
4534	** If we forget to change the length
4535	** in struct script, a field will be
4536	** padded with 0. This is an illegal
4537	** command.
4538	*/
4539
4540	if (opcode == 0) {
4541	printk (KERN_INFO"<6>" "%s: ERROR0 IN SCRIPT at %d.\n",
4542	ncr_name(np), (int) (src-start-1));
4543	MDELAY (10000);
4544	continue;
4545	};
4546
4547	/*
4548	** We use the bogus value 0xf00ff00f ;-)
4549	** to reserve data area in SCRIPTS.
4550	*/
4551	if (opcode == SCR_DATA_ZERO0xf00ff00f) {
4552	dst[-1] = 0;
4553	continue;
4554	}
4555
4556	if (DEBUG_FLAGSncr_debug & DEBUG_SCRIPT(0x0040))
4557	printk (KERN_INFO"<6>" "%p: <%x>\n",
4558	(src-1), (unsigned)opcode);
4559
4560	/*
4561	** We don't have to decode ALL commands
4562	*/
4563	switch (opcode >> 28) {
4564
4565	case 0xf:
4566	/*
4567	** LOAD / STORE DSA relative, don't relocate.
4568	*/
4569	relocs = 0;
4570	break;
4571	case 0xe:
4572	/*
4573	** LOAD / STORE absolute.
4574	*/
4575	relocs = 1;
4576	break;
4577	case 0xc:
4578	/*
4579	** COPY has TWO arguments.
4580	*/
4581	relocs = 2;
4582	tmp1 = src[0];
4583	tmp2 = src[1];
4584	#ifdef RELOC_KVAR
4585	if ((tmp1 & RELOC_MASK0xf0000000) == RELOC_KVAR)
4586	tmp1 = 0;
4587	if ((tmp2 & RELOC_MASK0xf0000000) == RELOC_KVAR)
4588	tmp2 = 0;
4589	#endif
4590	if ((tmp1 ^ tmp2) & 3) {
4591	printk (KERN_ERR"<3>""%s: ERROR1 IN SCRIPT at %d.\n",
4592	ncr_name(np), (int) (src-start-1));
4593	MDELAY (1000);
4594	}
4595	/*
4596	** If PREFETCH feature not enabled, remove
4597	** the NO FLUSH bit if present.
4598	*/
4599	if ((opcode & SCR_NO_FLUSH0x01000000) &&
4600	!(np->features & FE_PFEN(1<<12))) {
4601	dst[-1] = cpu_to_scr(opcode & ~SCR_NO_FLUSH)(opcode & ~0x01000000);
4602	++opchanged;
4603	}
4604	break;
4605
4606	case 0x0:
4607	/*
4608	** MOVE/CHMOV (absolute address)
4609	*/
4610	if (!(np->features & FE_WIDE(1<<1)))
4611	dst[-1] = cpu_to_scr(opcode \| OPC_MOVE)(opcode \| 0x08000000);
4612	relocs = 1;
4613	break;
4614
4615	case 0x1:
4616	/*
4617	** MOVE/CHMOV (table indirect)
4618	*/
4619	if (!(np->features & FE_WIDE(1<<1)))
4620	dst[-1] = cpu_to_scr(opcode \| OPC_MOVE)(opcode \| 0x08000000);
4621	relocs = 0;
4622	break;
4623
4624	case 0x8:
4625	/*
4626	** JUMP / CALL
4627	** dont't relocate if relative :-)
4628	*/
4629	if (opcode & 0x00800000)
4630	relocs = 0;
4631	else if ((opcode & 0xf8400000) == 0x80400000)/JUMP64/
4632	relocs = 2;
4633	else
4634	relocs = 1;
4635	break;
4636
4637	case 0x4:
4638	case 0x5:
4639	case 0x6:
4640	case 0x7:
4641	relocs = 1;
4642	break;
4643
4644	default:
4645	relocs = 0;
4646	break;
4647	};
4648
4649	if (!relocs) {
4650	dst++ = cpu_to_scr(src++)(*src++);
4651	continue;
4652	}
4653	while (relocs--) {
4654	old = *src++;
4655
4656	switch (old & RELOC_MASK0xf0000000) {
4657	case RELOC_REGISTER0x60000000:
4658	new = (old & ~RELOC_MASK0xf0000000) + pcivtobus(np->base_ba)(np->base_ba);
4659	break;
4660	case RELOC_LABEL0x50000000:
4661	new = (old & ~RELOC_MASK0xf0000000) + np->p_script;
4662	break;
4663	case RELOC_LABELH0x80000000:
4664	new = (old & ~RELOC_MASK0xf0000000) + np->p_scripth;
4665	break;
4666	case RELOC_SOFTC0x40000000:
4667	new = (old & ~RELOC_MASK0xf0000000) + np->p_ncb;
4668	break;
4669	#ifdef RELOC_KVAR
4670	case RELOC_KVAR:
4671	new=0;
4672	if (((old & ~RELOC_MASK0xf0000000) < SCRIPT_KVAR_FIRST) \|\|
4673	((old & ~RELOC_MASK0xf0000000) > SCRIPT_KVAR_LAST))
4674	panic("ncr KVAR out of range");
4675	new = vtobus(script_kvars[old & ~RELOC_MASK])virt_to_phys(script_kvars[old & ~0xf0000000]);
4676	#endif
4677	break;
4678	case 0:
4679	/* Don't relocate a 0 address. */
4680	if (old == 0) {
4681	new = old;
4682	break;
4683	}
4684	/* fall through */
4685	default:
4686	new = 0; /* For 'cc' not to complain */
4687	panic("ncr_script_copy_and_bind: "
4688	"weird relocation %x\n", old);
4689	break;
4690	}
4691
4692	*dst++ = cpu_to_scr(new)(new);
4693	}
4694	};
4695	}
4696
4697	/*==========================================================
4698	**
4699	**
4700	** Auto configuration: attach and init a host adapter.
4701	**
4702	**
4703	**==========================================================
4704	*/
4705
4706	/*
4707	** Linux host data structure.
4708	*/
4709
4710	struct host_data {
4711	struct ncb *ncb;
4712	};
4713
4714	/*
4715	** Print something which allows to retrieve the controler type, unit,
4716	** target, lun concerned by a kernel message.
4717	*/
4718
4719	static void PRINT_TARGET(ncb_p np, int target)
4720	{
4721	printk(KERN_INFO"<6>" "%s-<%d,*>: ", ncr_name(np), target);
4722	}
4723
4724	static void PRINT_LUN(ncb_p np, int target, int lun)
4725	{
4726	printk(KERN_INFO"<6>" "%s-<%d,%d>: ", ncr_name(np), target, lun);
4727	}
4728
4729	static void PRINT_ADDR(Scsi_Cmnd *cmd)
4730	{
4731	struct host_data host_data = (struct host_data ) cmd->host->hostdata;
4732	PRINT_LUN(host_data->ncb, cmd->target, cmd->lun);
4733	}
4734
4735	/*==========================================================
4736	**
4737	** NCR chip clock divisor table.
4738	** Divisors are multiplied by 10,000,000 in order to make
4739	** calculations more simple.
4740	**
4741	**==========================================================
4742	*/
4743
4744	#define _5M5000000 5000000
4745	static u_longunsigned long div_10M[] =
4746	{2_5M5000000, 3_5M5000000, 4_5M5000000, 6_5M5000000, 8_5M5000000, 12_5M5000000, 16*_5M5000000};
4747
4748
4749	/*===============================================================
4750	**
4751	** Prepare io register values used by ncr_init() according
4752	** to selected and supported features.
4753	**
4754	** NCR/SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64,
4755	** 128 transfers. All chips support at least 16 transfers bursts.
4756	** The 825A, 875 and 895 chips support bursts of up to 128
4757	** transfers and the 895A and 896 support bursts of up to 64
4758	** transfers. All other chips support up to 16 transfers bursts.
4759	**
4760	** For PCI 32 bit data transfers each transfer is a DWORD (4 bytes).
4761	** It is a QUADWORD (8 bytes) for PCI 64 bit data transfers.
4762	** Only the 896 is able to perform 64 bit data transfers.
4763	**
4764	** We use log base 2 (burst length) as internal code, with
4765	** value 0 meaning "burst disabled".
4766	**
4767	**===============================================================
4768	*/
4769
4770	/*
4771	* Burst length from burst code.
4772	*/
4773	#define burst_length(bc)(!(bc))? 0 : 1 << (bc) (!(bc))? 0 : 1 << (bc)
4774
4775	/*
4776	* Burst code from io register bits.
4777	*/
4778	#define burst_code(dmode, ctest4, ctest5)(ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ( (ctest5) & 0x04) + 1 \
4779	(ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
4780
4781	/*
4782	* Set initial io register bits from burst code.
4783	*/
4784	static inlineinline __attribute__((always_inline)) void ncr_init_burst(ncb_p np, u_charunsigned char bc)
4785	{
4786	np->rv_ctest4 &= ~0x80;
4787	np->rv_dmode &= ~(0x3 << 6);
4788	np->rv_ctest5 &= ~0x4;
4789
4790	if (!bc) {
4791	np->rv_ctest4 \|= 0x80;
4792	}
4793	else {
4794	--bc;
4795	np->rv_dmode \|= ((bc & 0x3) << 6);
4796	np->rv_ctest5 \|= (bc & 0x4);
4797	}
4798	}
4799
4800	#ifdef SCSI_NCR_NVRAM_SUPPORT
4801
4802	/*
4803	** Get target set-up from Symbios format NVRAM.
4804	*/
4805
4806	static void __init
4807	ncr_Symbios_setup_target(ncb_p np, int target, Symbios_nvram *nvram)
4808	{
4809	tcb_p tp = &np->target[target];
4810	Symbios_target *tn = &nvram->target[target];
4811
4812	tp->usrsync = tn->sync_period ? (tn->sync_period + 3) / 4 : 255;
4813	tp->usrwide = tn->bus_width == 0x10 ? 1 : 0;
4814	tp->usrtags =
4815	(tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED(1<<3))? MAX_TAGS(8) : 0;
4816
4817	if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE(1)))
4818	tp->usrflag \|= UF_NODISC(0x02);
4819	if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME(1<<1)))
4820	tp->usrflag \|= UF_NOSCAN(0x04);
4821	}
4822
4823	/*
4824	** Get target set-up from Tekram format NVRAM.
4825	*/
4826
4827	static void __init
4828	ncr_Tekram_setup_target(ncb_p np, int target, Tekram_nvram *nvram)
4829	{
4830	tcb_p tp = &np->target[target];
4831	struct Tekram_target *tn = &nvram->target[target];
4832	int i;
4833
4834	if (tn->flags & TEKRAM_SYNC_NEGO(1<<1)) {
4835	i = tn->sync_index & 0xf;
4836	tp->usrsync = Tekram_sync[i];
4837	}
4838
4839	tp->usrwide = (tn->flags & TEKRAM_WIDE_NEGO(1<<5)) ? 1 : 0;
4840
4841	if (tn->flags & TEKRAM_TAGGED_COMMANDS(1<<4)) {
4842	tp->usrtags = 2 << nvram->max_tags_index;
4843	}
4844
4845	if (!(tn->flags & TEKRAM_DISCONNECT_ENABLE(1<<2)))
4846	tp->usrflag = UF_NODISC(0x02);
4847
4848	/* If any device does not support parity, we will not use this option */
4849	if (!(tn->flags & TEKRAM_PARITY_CHECK(1)))
4850	np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */
4851	}
4852	#endif /* SCSI_NCR_NVRAM_SUPPORT */
4853
4854	/*
4855	** Save initial settings of some IO registers.
4856	** Assumed to have been set by BIOS.
4857	*/
4858	static void __init ncr_save_initial_setting(ncb_p np)
4859	{
4860	np->sv_scntl0 = INB(nc_scntl0)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl0))))) & 0x0a;
4861	np->sv_dmode = INB(nc_dmode)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dmode))))) & 0xce;
4862	np->sv_dcntl = INB(nc_dcntl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dcntl))))) & 0xa8;
4863	np->sv_ctest3 = INB(nc_ctest3)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest3))))) & 0x01;
4864	np->sv_ctest4 = INB(nc_ctest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest4))))) & 0x80;
4865	np->sv_gpcntl = INB(nc_gpcntl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpcntl)))));
4866	np->sv_stest2 = INB(nc_stest2)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest2))))) & 0x20;
4867	np->sv_stest4 = INB(nc_stest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest4)))));
4868	np->sv_stest1 = INB(nc_stest1)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest1)))));
4869
4870	np->sv_scntl3 = INB(nc_scntl3)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl3))))) & 0x07;
4871
4872	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
4873	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21) ){
4874	/*
4875	** C1010 always uses large fifo, bit 5 rsvd
4876	** scntl4 used ONLY with C1010
4877	*/
4878	np->sv_ctest5 = INB(nc_ctest5)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest5))))) & 0x04 ;
4879	np->sv_scntl4 = INB(nc_scntl4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl4)))));
4880	}
4881	else {
4882	np->sv_ctest5 = INB(nc_ctest5)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest5))))) & 0x24 ;
4883	np->sv_scntl4 = 0;
4884	}
4885	}
4886
4887	/*
4888	** Prepare io register values used by ncr_init()
4889	** according to selected and supported features.
4890	*/
4891	static int __init ncr_prepare_setting(ncb_p np, ncr_nvram *nvram)
4892	{
4893	u_charunsigned char burst_max;
4894	u_longunsigned long period;
4895	int i;
4896
4897	/*
4898	** Wide ?
4899	*/
4900
4901	np->maxwide = (np->features & FE_WIDE(1<<1))? 1 : 0;
4902
4903	/*
4904	** Get the frequency of the chip's clock.
4905	** Find the right value for scntl3.
4906	*/
4907
4908	if (np->features & FE_QUAD(1<<5))
4909	np->multiplier = 4;
4910	else if (np->features & FE_DBLR(1<<4))
4911	np->multiplier = 2;
4912	else
4913	np->multiplier = 1;
4914
4915	np->clock_khz = (np->features & FE_CLK80(1<<15))? 80000 : 40000;
4916	np->clock_khz *= np->multiplier;
4917
4918	if (np->clock_khz != 40000)
4919	ncr_getclock(np, np->multiplier);
4920
4921	/*
4922	* Divisor to be used for async (timer pre-scaler).
4923	*
4924	* Note: For C1010 the async divisor is 2(8) if he
4925	* quadrupler is disabled (enabled).
4926	*/
4927
4928	if ( (np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
4929	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
4930
4931	np->rv_scntl3 = 0;
4932	}
4933	else
4934	{
4935	i = np->clock_divn - 1;
4936	while (--i >= 0) {
4937	if (10ul * SCSI_NCR_MIN_ASYNC(40) * np->clock_khz
4938	> div_10M[i]) {
4939	++i;
4940	break;
4941	}
4942	}
4943	np->rv_scntl3 = i+1;
4944	}
4945
4946
4947	/*
4948	* Save the ultra3 register for the C1010/C1010_66
4949	*/
4950
4951	np->rv_scntl4 = np->sv_scntl4;
4952
4953	/*
4954	* Minimum synchronous period factor supported by the chip.
4955	* Btw, 'period' is in tenths of nanoseconds.
4956	*/
4957
4958	period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
4959	if (period <= 250) np->minsync = 10;
4960	else if (period <= 303) np->minsync = 11;
4961	else if (period <= 500) np->minsync = 12;
4962	else np->minsync = (period + 40 - 1) / 40;
4963
4964	/*
4965	* Fix up. If sync. factor is 10 (160000Khz clock) and chip
4966	* supports ultra3, then min. sync. period 12.5ns and the factor is 9
4967	*/
4968
4969	if ((np->minsync == 10) && (np->features & FE_ULTRA3(1<<22)))
4970	np->minsync = 9;
4971
4972	/*
4973	* Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
4974	*
4975	* Transfer period minimums: SCSI-1 200 (50); Fast 100 (25)
4976	* Ultra 50 (12); Ultra2 (6); Ultra3 (3)
4977	*/
4978
4979	if (np->minsync < 25 && !(np->features & (FE_ULTRA(1<<2)\|FE_ULTRA2(1<<3)\|FE_ULTRA3(1<<22))))
4980	np->minsync = 25;
4981	else if (np->minsync < 12 && (np->features & FE_ULTRA(1<<2)))
4982	np->minsync = 12;
4983	else if (np->minsync < 10 && (np->features & FE_ULTRA2(1<<3)))
4984	np->minsync = 10;
4985	else if (np->minsync < 9 && (np->features & FE_ULTRA3(1<<22)))
4986	np->minsync = 9;
4987
4988	/*
4989	* Maximum synchronous period factor supported by the chip.
4990	*/
4991
4992	period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
4993	np->maxsync = period > 2540 ? 254 : period / 10;
4994
4995	/*
4996	** 64 bit (53C895A or 53C896) ?
4997	*/
4998	if (np->features & FE_64BIT(1<<17))
4999	#ifdef SCSI_NCR_USE_64BIT_DAC
5000	np->rv_ccntl1 \|= (XTIMOD0x04 \| EXTIBMV0x02);
5001	#else
5002	np->rv_ccntl1 \|= (DDAC0x08);
5003	#endif
5004
5005	/*
5006	** Phase mismatch handled by SCRIPTS (53C895A, 53C896 or C1010) ?
5007	*/
5008	if (np->features & FE_NOPM(1<<19))
5009	np->rv_ccntl0 \|= (ENPMJ0x80);
5010
5011	/*
5012	** Prepare initial value of other IO registers
5013	*/
5014	#if defined SCSI_NCR_TRUST_BIOS_SETTING
5015	np->rv_scntl0 = np->sv_scntl0;
5016	np->rv_dmode = np->sv_dmode;
5017	np->rv_dcntl = np->sv_dcntl;
5018	np->rv_ctest3 = np->sv_ctest3;
5019	np->rv_ctest4 = np->sv_ctest4;
5020	np->rv_ctest5 = np->sv_ctest5;
5021	burst_max = burst_code(np->sv_dmode, np->sv_ctest4, np->sv_ctest5)(np->sv_ctest4) & 0x80? 0 : (((np->sv_dmode) & 0xc0 ) >> 6) + ((np->sv_ctest5) & 0x04) + 1;
5022	#else
5023
5024	/*
5025	** Select burst length (dwords)
5026	*/
5027	burst_max = driver_setup.burst_max;
5028	if (burst_max == 255)
5029	burst_max = burst_code(np->sv_dmode, np->sv_ctest4, np->sv_ctest5)(np->sv_ctest4) & 0x80? 0 : (((np->sv_dmode) & 0xc0 ) >> 6) + ((np->sv_ctest5) & 0x04) + 1;
5030	if (burst_max > 7)
5031	burst_max = 7;
5032	if (burst_max > np->maxburst)
5033	burst_max = np->maxburst;
5034
5035	/*
5036	** DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2.
5037	** This chip and the 860 Rev 1 may wrongly use PCI cache line
5038	** based transactions on LOAD/STORE instructions. So we have
5039	** to prevent these chips from using such PCI transactions in
5040	** this driver. The generic sym53c8xx driver that does not use
5041	** LOAD/STORE instructions does not need this work-around.
5042	*/
5043	if ((np->device_id == PCI_DEVICE_ID_NCR_53C8100x0001 &&
5044	np->revision_id >= 0x10 && np->revision_id <= 0x11) \|\|
5045	(np->device_id == PCI_DEVICE_ID_NCR_53C8600x0006 &&
5046	np->revision_id <= 0x1))
5047	np->features &= ~(FE_WRIE(1<<8)\|FE_ERL(1<<6)\|FE_ERMP(1<<9));
5048
5049	/*
5050	** DEL ? - 53C1010 Rev 1 - Part Number 609-0393638
5051	** 64-bit Slave Cycles must be disabled.
5052	*/
5053	if ( ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) && (np->revision_id < 0x02) )
5054	\|\| (np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21 ) )
5055	np->rv_ccntl1 \|= 0x10;
5056
5057	/*
5058	** Select all supported special features.
5059	** If we are using on-board RAM for scripts, prefetch (PFEN)
5060	** does not help, but burst op fetch (BOF) does.
5061	** Disabling PFEN makes sure BOF will be used.
5062	*/
5063	if (np->features & FE_ERL(1<<6))
5064	np->rv_dmode \|= ERL0x08; /* Enable Read Line */
5065	if (np->features & FE_BOF(1<<10))
5066	np->rv_dmode \|= BOF0x02; /* Burst Opcode Fetch */
5067	if (np->features & FE_ERMP(1<<9))
5068	np->rv_dmode \|= ERMP0x04; /* Enable Read Multiple */
5069	#if 1
5070	if ((np->features & FE_PFEN(1<<12)) && !np->base2_ba)
5071	#else
5072	if (np->features & FE_PFEN(1<<12))
5073	#endif
5074	np->rv_dcntl \|= PFEN0x20; /* Prefetch Enable */
5075	if (np->features & FE_CLSE(1<<7))
5076	np->rv_dcntl \|= CLSE0x80; /* Cache Line Size Enable */
5077	if (np->features & FE_WRIE(1<<8))
5078	np->rv_ctest3 \|= WRIE0x01; /* Write and Invalidate */
5079
5080
5081	if ( (np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
5082	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21) &&
5083	(np->features & FE_DFS(1<<11)))
5084	np->rv_ctest5 \|= DFS0x20; /* Dma Fifo Size */
5085	/* C1010/C1010_66 always large fifo */
5086
5087	/*
5088	** Select some other
5089	*/
5090	if (driver_setup.master_parity)
5091	np->rv_ctest4 \|= MPEE0x08; /* Master parity checking */
5092	if (driver_setup.scsi_parity)
5093	np->rv_scntl0 \|= 0x0a; /* full arb., ena parity, par->ATN */
5094
5095	#ifdef SCSI_NCR_NVRAM_SUPPORT
5096	/*
5097	** Get parity checking, host ID and verbose mode from NVRAM
5098	**/
5099	if (nvram) {
5100	switch(nvram->type) {
5101	case SCSI_NCR_TEKRAM_NVRAM(2):
5102	np->myaddr = nvram->data.Tekram.host_id & 0x0f;
5103	break;
5104	case SCSI_NCR_SYMBIOS_NVRAM(1):
5105	if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE(1<<1)))
5106	np->rv_scntl0 &= ~0x0a;
5107	np->myaddr = nvram->data.Symbios.host_id & 0x0f;
5108	if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS(1<<2))
5109	np->verbose += 1;
5110	break;
5111	}
5112	}
5113	#endif
5114	/*
5115	** Get SCSI addr of host adapter (set by bios?).
5116	*/
5117	if (np->myaddr == 255) {
5118	np->myaddr = INB(nc_scid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scid))))) & 0x07;
5119	if (!np->myaddr)
5120	np->myaddr = SCSI_NCR_MYADDR(7);
5121	}
5122
5123	#endif /* SCSI_NCR_TRUST_BIOS_SETTING */
5124
5125	/*
5126	* Prepare initial io register bits for burst length
5127	*/
5128	ncr_init_burst(np, burst_max);
5129
5130	/*
5131	** Set SCSI BUS mode.
5132	**
5133	** - ULTRA2 chips (895/895A/896)
5134	** and ULTRA 3 chips (1010) report the current
5135	** BUS mode through the STEST4 IO register.
5136	** - For previous generation chips (825/825A/875),
5137	** user has to tell us how to check against HVD,
5138	** since a 100% safe algorithm is not possible.
5139	*/
5140	np->scsi_mode = SMODE_SE0x80;
5141	if (np->features & (FE_ULTRA2(1<<3) \| FE_ULTRA3(1<<22)))
5142	np->scsi_mode = (np->sv_stest4 & SMODE0xc0);
5143	else if (np->features & FE_DIFF(1<<21)) {
5144	switch(driver_setup.diff_support) {
5145	case 4: /* Trust previous settings if present, then GPIO3 */
5146	if (np->sv_scntl3) {
5147	if (np->sv_stest2 & 0x20)
5148	np->scsi_mode = SMODE_HVD0x40;
5149	break;
5150	}
5151	case 3: /* SYMBIOS controllers report HVD through GPIO3 */
5152	if (nvram && nvram->type != SCSI_NCR_SYMBIOS_NVRAM(1))
5153	break;
5154	if (INB(nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpreg))))) & 0x08)
5155	break;
5156	case 2: /* Set HVD unconditionally */
5157	np->scsi_mode = SMODE_HVD0x40;
5158	case 1: /* Trust previous settings for HVD */
5159	if (np->sv_stest2 & 0x20)
5160	np->scsi_mode = SMODE_HVD0x40;
5161	break;
5162	default:/* Don't care about HVD */
5163	break;
5164	}
5165	}
5166	if (np->scsi_mode == SMODE_HVD0x40)
5167	np->rv_stest2 \|= 0x20;
5168
5169	/*
5170	** Set LED support from SCRIPTS.
5171	** Ignore this feature for boards known to use a
5172	** specific GPIO wiring and for the 895A or 896
5173	** that drive the LED directly.
5174	** Also probe initial setting of GPIO0 as output.
5175	*/
5176	if ((driver_setup.led_pin \|\|
5177	(nvram && nvram->type == SCSI_NCR_SYMBIOS_NVRAM(1))) &&
5178	!(np->features & FE_LEDC(1<<20)) && !(np->sv_gpcntl & 0x01))
5179	np->features \|= FE_LED0(1<<0);
5180
5181	/*
5182	** Set irq mode.
5183	*/
5184	switch(driver_setup.irqm & 3) {
5185	case 2:
5186	np->rv_dcntl \|= IRQM0x08;
5187	break;
5188	case 1:
5189	np->rv_dcntl \|= (np->sv_dcntl & IRQM0x08);
5190	break;
5191	default:
5192	break;
5193	}
5194
5195	/*
5196	** Configure targets according to driver setup.
5197	** If NVRAM present get targets setup from NVRAM.
5198	** Allow to override sync, wide and NOSCAN from
5199	** boot command line.
5200	*/
5201	for (i = 0 ; i < MAX_TARGET((16)) ; i++) {
5202	tcb_p tp = &np->target[i];
5203
5204	tp->usrsync = 255;
5205	#ifdef SCSI_NCR_NVRAM_SUPPORT
5206	if (nvram) {
5207	switch(nvram->type) {
5208	case SCSI_NCR_TEKRAM_NVRAM(2):
5209	ncr_Tekram_setup_target(np, i, &nvram->data.Tekram);
5210	break;
5211	case SCSI_NCR_SYMBIOS_NVRAM(1):
5212	ncr_Symbios_setup_target(np, i, &nvram->data.Symbios);
5213	break;
5214	}
5215	if (driver_setup.use_nvram & 0x2)
5216	tp->usrsync = driver_setup.default_sync;
5217	if (driver_setup.use_nvram & 0x4)
5218	tp->usrwide = driver_setup.max_wide;
5219	if (driver_setup.use_nvram & 0x8)
5220	tp->usrflag &= ~UF_NOSCAN(0x04);
5221	}
5222	else {
5223	#else
5224	if (1) {
5225	#endif
5226	tp->usrsync = driver_setup.default_sync;
5227	tp->usrwide = driver_setup.max_wide;
5228	tp->usrtags = MAX_TAGS(8);
5229	if (!driver_setup.disconnection)
5230	np->target[i].usrflag = UF_NODISC(0x02);
5231	}
5232	}
5233
5234	/*
5235	** Announce all that stuff to user.
5236	*/
5237
5238	i = nvram ? nvram->type : 0;
5239	printk(KERN_INFO"<6>" "%s: %sID %d, Fast-%d%s%s\n", ncr_name(np),
5240	i == SCSI_NCR_SYMBIOS_NVRAM(1) ? "Symbios format NVRAM, " :
5241	(i == SCSI_NCR_TEKRAM_NVRAM(2) ? "Tekram format NVRAM, " : ""),
5242	np->myaddr,
5243	np->minsync < 10 ? 80 :
5244	(np->minsync < 12 ? 40 : (np->minsync < 25 ? 20 : 10) ),
5245	(np->rv_scntl0 & 0xa) ? ", Parity Checking" : ", NO Parity",
5246	(np->rv_stest2 & 0x20) ? ", Differential" : "");
5247
5248	if (bootverbose(np->verbose) > 1) {
5249	printk (KERN_INFO"<6>" "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
5250	"(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
5251	ncr_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl,
5252	np->sv_ctest3, np->sv_ctest4, np->sv_ctest5);
5253
5254	printk (KERN_INFO"<6>" "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
5255	"(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
5256	ncr_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
5257	np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
5258	}
5259
5260	if (bootverbose(np->verbose) && np->base2_ba)
5261	printk (KERN_INFO"<6>" "%s: on-chip RAM at 0x%lx\n",
5262	ncr_name(np), np->base2_ba);
5263
5264	return 0;
5265	}
5266
5267
5268	#ifdef SCSI_NCR_DEBUG_NVRAM
5269
5270	void __init ncr_display_Symbios_nvram(ncb_p np, Symbios_nvram *nvram)
5271	{
5272	int i;
5273
5274	/* display Symbios nvram host data */
5275	printk(KERN_DEBUG"<7>" "%s: HOST ID=%d%s%s%s%s%s\n",
5276	ncr_name(np), nvram->host_id & 0x0f,
5277	(nvram->flags & SYMBIOS_SCAM_ENABLE(1)) ? " SCAM" :"",
5278	(nvram->flags & SYMBIOS_PARITY_ENABLE(1<<1)) ? " PARITY" :"",
5279	(nvram->flags & SYMBIOS_VERBOSE_MSGS(1<<2)) ? " VERBOSE" :"",
5280	(nvram->flags & SYMBIOS_CHS_MAPPING(1<<3)) ? " CHS_ALT" :"",
5281	(nvram->flags1 & SYMBIOS_SCAN_HI_LO(1)) ? " HI_LO" :"");
5282
5283	/* display Symbios nvram drive data */
5284	for (i = 0 ; i < 15 ; i++) {
5285	struct Symbios_target *tn = &nvram->target[i];
5286	printk(KERN_DEBUG"<7>" "%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n",
5287	ncr_name(np), i,
5288	(tn->flags & SYMBIOS_DISCONNECT_ENABLE(1)) ? " DISC" : "",
5289	(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME(1<<1)) ? " SCAN_BOOT" : "",
5290	(tn->flags & SYMBIOS_SCAN_LUNS(1<<2)) ? " SCAN_LUNS" : "",
5291	(tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED(1<<3))? " TCQ" : "",
5292	tn->bus_width,
5293	tn->sync_period / 4,
5294	tn->timeout);
5295	}
5296	}
5297
5298	static u_charunsigned char Tekram_boot_delay[7] __initdata = {3, 5, 10, 20, 30, 60, 120};
5299
5300	void __init ncr_display_Tekram_nvram(ncb_p np, Tekram_nvram *nvram)
5301	{
5302	int i, tags, boot_delay;
5303	char *rem;
5304
5305	/* display Tekram nvram host data */
5306	tags = 2 << nvram->max_tags_index;
5307	boot_delay = 0;
5308	if (nvram->boot_delay_index < 6)
5309	boot_delay = Tekram_boot_delay[nvram->boot_delay_index];
5310	switch((nvram->flags & TEKRAM_REMOVABLE_FLAGS(3<<6)) >> 6) {
5311	default:
5312	case 0: rem = ""; break;
5313	case 1: rem = " REMOVABLE=boot device"; break;
5314	case 2: rem = " REMOVABLE=all"; break;
5315	}
5316
5317	printk(KERN_DEBUG"<7>"
5318	"%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n",
5319	ncr_name(np), nvram->host_id & 0x0f,
5320	(nvram->flags1 & SYMBIOS_SCAM_ENABLE(1)) ? " SCAM" :"",
5321	(nvram->flags & TEKRAM_MORE_THAN_2_DRIVES(1)) ? " >2DRIVES" :"",
5322	(nvram->flags & TEKRAM_DRIVES_SUP_1GB(1<<1)) ? " >1GB" :"",
5323	(nvram->flags & TEKRAM_RESET_ON_POWER_ON(1<<2)) ? " RESET" :"",
5324	(nvram->flags & TEKRAM_ACTIVE_NEGATION(1<<3)) ? " ACT_NEG" :"",
5325	(nvram->flags & TEKRAM_IMMEDIATE_SEEK(1<<4)) ? " IMM_SEEK" :"",
5326	(nvram->flags & TEKRAM_SCAN_LUNS(1<<5)) ? " SCAN_LUNS" :"",
5327	(nvram->flags1 & TEKRAM_F2_F6_ENABLED(1)) ? " F2_F6" :"",
5328	rem, boot_delay, tags);
5329
5330	/* display Tekram nvram drive data */
5331	for (i = 0; i <= 15; i++) {
5332	int sync, j;
5333	struct Tekram_target *tn = &nvram->target[i];
5334	j = tn->sync_index & 0xf;
5335	sync = Tekram_sync[j];
5336	printk(KERN_DEBUG"<7>" "%s-%d:%s%s%s%s%s%s PERIOD=%d\n",
5337	ncr_name(np), i,
5338	(tn->flags & TEKRAM_PARITY_CHECK(1)) ? " PARITY" : "",
5339	(tn->flags & TEKRAM_SYNC_NEGO(1<<1)) ? " SYNC" : "",
5340	(tn->flags & TEKRAM_DISCONNECT_ENABLE(1<<2)) ? " DISC" : "",
5341	(tn->flags & TEKRAM_START_CMD(1<<3)) ? " START" : "",
5342	(tn->flags & TEKRAM_TAGGED_COMMANDS(1<<4)) ? " TCQ" : "",
5343	(tn->flags & TEKRAM_WIDE_NEGO(1<<5)) ? " WIDE" : "",
5344	sync);
5345	}
5346	}
5347	#endif /* SCSI_NCR_DEBUG_NVRAM */
5348
5349	/*
5350	** Host attach and initialisations.
5351	**
5352	** Allocate host data and ncb structure.
5353	** Request IO region and remap MMIO region.
5354	** Do chip initialization.
5355	** If all is OK, install interrupt handling and
5356	** start the timer daemon.
5357	*/
5358
5359	static int __init
5360	ncr_attach (Scsi_Host_Template tpnt, int unit, ncr_device device)
5361	{
5362	struct host_data *host_data;
5363	ncb_p np = 0;
5364	struct Scsi_Host *instance = 0;
5365	u_longunsigned long flags = 0;
5366	ncr_nvram *nvram = device->nvram;
5367	int i;
5368
5369	printk(KERN_INFO"<6>" NAME53C"sym53c" "%s-%d: rev 0x%x on pci bus %d device %d function %d "
5370	#ifdef __sparc__
5371	"irq %s\n",
5372	#else
5373	"irq %d\n",
5374	#endif
5375	device->chip.name, unit, device->chip.revision_id,
5376	device->slot.bus, (device->slot.device_fn & 0xf8) >> 3,
5377	device->slot.device_fn & 7,
5378	#ifdef __sparc__
5379	__irq_itoa(device->slot.irq));
5380	#else
5381	device->slot.irq);
5382	#endif
5383
5384	/*
5385	** Allocate host_data structure
5386	*/
5387	if (!(instance = scsi_register(tpnt, sizeof(*host_data))))
5388	goto attach_error;
5389	host_data = (struct host_data *) instance->hostdata;
5390
5391	/*
5392	** Allocate the host control block.
5393	*/
5394	np = __m_calloc_dma(device->pdev, sizeof(struct ncb), "NCB")m_calloc(sizeof(struct ncb), "NCB");
5395	if (!np)
5396	goto attach_error;
5397	NCR_INIT_LOCK_NCB(np)do { } while (0);
5398	np->pdev = device->pdev;
5399	np->p_ncb = vtobus(np)virt_to_phys(np);
5400	host_data->ncb = np;
5401
5402	/*
5403	** Store input informations in the host data structure.
5404	*/
5405	strncpy(np->chip_name, device->chip.name, sizeof(np->chip_name) - 1);
5406	np->unit = unit;
5407	np->verbose = driver_setup.verbose;
5408	sprintflinux_sprintf(np->inst_name, NAME53C"sym53c" "%s-%d", np->chip_name, np->unit);
5409	np->device_id = device->chip.device_id;
5410	np->revision_id = device->chip.revision_id;
5411	np->bus = device->slot.bus;
5412	np->device_fn = device->slot.device_fn;
5413	np->features = device->chip.features;
5414	np->clock_divn = device->chip.nr_divisor;
5415	np->maxoffs = device->chip.offset_max;
5416	np->maxburst = device->chip.burst_max;
5417	np->myaddr = device->host_id;
5418
5419	/*
5420	** Allocate the start queue.
5421	*/
5422	np->squeue = (ncrcmd *)
5423	m_calloc_dma(sizeof(ncrcmd)(MAX_START2), "SQUEUE")m_calloc(sizeof(ncrcmd)(((8(8) + 2(16)) + 4)2), "SQUEUE");
5424	if (!np->squeue)
5425	goto attach_error;
5426	np->p_squeue = vtobus(np->squeue)virt_to_phys(np->squeue);
5427
5428	/*
5429	** Allocate the done queue.
5430	*/
5431	np->dqueue = (ncrcmd *)
5432	m_calloc_dma(sizeof(ncrcmd)(MAX_START2), "DQUEUE")m_calloc(sizeof(ncrcmd)(((8(8) + 2(16)) + 4)2), "DQUEUE");
5433	if (!np->dqueue)
5434	goto attach_error;
5435
5436	/*
5437	** Allocate the target bus address array.
5438	*/
5439	np->targtbl = (u_int32 *) m_calloc_dma(256, "TARGTBL")m_calloc(256, "TARGTBL");
5440	if (!np->targtbl)
5441	goto attach_error;
5442
5443	/*
5444	** Allocate SCRIPTS areas
5445	*/
5446	np->script0 = (struct script *)
5447	m_calloc_dma(sizeof(struct script), "SCRIPT")m_calloc(sizeof(struct script), "SCRIPT");
5448	if (!np->script0)
5449	goto attach_error;
5450	np->scripth0 = (struct scripth *)
5451	m_calloc_dma(sizeof(struct scripth), "SCRIPTH")m_calloc(sizeof(struct scripth), "SCRIPTH");
5452	if (!np->scripth0)
5453	goto attach_error;
5454
5455	/*
5456	** Initialyze the CCB free queue and,
5457	** allocate some CCB. We need at least ONE.
5458	*/
5459	xpt_que_init(&np->free_ccbq)do { (&np->free_ccbq)->flink = (&np->free_ccbq ); (&np->free_ccbq)->blink = (&np->free_ccbq ); } while (0);
5460	xpt_que_init(&np->b0_ccbq)do { (&np->b0_ccbq)->flink = (&np->b0_ccbq); (&np->b0_ccbq)->blink = (&np->b0_ccbq); } while (0);
5461	if (!ncr_alloc_ccb(np))
5462	goto attach_error;
5463
5464	/*
5465	** Initialize timer structure
5466	**
5467	*/
5468	init_timer(&np->timer);
5469	np->timer.data = (unsigned long) np;
5470	np->timer.function = sym53c8xx_timeout;
5471
5472	/*
5473	** Try to map the controller chip to
5474	** virtual and physical memory.
5475	*/
5476
5477	np->base_ba = device->slot.base;
5478	np->base_ws = (np->features & FE_IO256(1<<18))? 256 : 128;
5479	np->base2_ba = (np->features & FE_RAM(1<<14))? device->slot.base_2 : 0;
5480
5481	#ifndef SCSI_NCR_IOMAPPED
5482	np->base_va = remap_pci_mem(np->base_ba, np->base_ws);
5483	if (!np->base_va) {
5484	printk(KERN_ERR"<3>" "%s: can't map PCI MMIO region\n",ncr_name(np));
5485	goto attach_error;
5486	}
5487	else if (bootverbose(np->verbose) > 1)
5488	printk(KERN_INFO"<6>" "%s: using memory mapped IO\n", ncr_name(np));
5489
5490	/*
5491	** Make the controller's registers available.
5492	** Now the INB INW INL OUTB OUTW OUTL macros
5493	** can be used safely.
5494	*/
5495
5496	np->reg = (struct ncr_reg *) np->base_va;
5497
5498	#endif /* !defined SCSI_NCR_IOMAPPED */
5499
5500	/*
5501	** If on-chip RAM is used, make sure SCRIPTS isn't too large.
5502	*/
5503	if (np->base2_ba && sizeof(struct script) > 4096) {
5504	printk(KERN_ERR"<3>" "%s: script too large.\n", ncr_name(np));
5505	goto attach_error;
5506	}
5507
5508	/*
5509	** Try to map the controller chip into iospace.
5510	*/
5511
5512	if (device->slot.io_port) {
5513	request_region(device->slot.io_port, np->base_ws, NAME53C8XX"sym53c8xx");
5514	np->base_io = device->slot.io_port;
5515	}
5516
5517	#ifdef SCSI_NCR_NVRAM_SUPPORT
5518	if (nvram) {
5519	switch(nvram->type) {
5520	case SCSI_NCR_SYMBIOS_NVRAM(1):
5521	#ifdef SCSI_NCR_DEBUG_NVRAM
5522	ncr_display_Symbios_nvram(np, &nvram->data.Symbios);
5523	#endif
5524	break;
5525	case SCSI_NCR_TEKRAM_NVRAM(2):
5526	#ifdef SCSI_NCR_DEBUG_NVRAM
5527	ncr_display_Tekram_nvram(np, &nvram->data.Tekram);
5528	#endif
5529	break;
5530	default:
5531	nvram = 0;
5532	#ifdef SCSI_NCR_DEBUG_NVRAM
5533	printk(KERN_DEBUG"<7>" "%s: NVRAM: None or invalid data.\n", ncr_name(np));
5534	#endif
5535	}
5536	}
5537	#endif
5538
5539	/*
5540	** Save setting of some IO registers, so we will
5541	** be able to probe specific implementations.
5542	*/
5543	ncr_save_initial_setting (np);
5544
5545	/*
5546	** Reset the chip now, since it has been reported
5547	** that SCSI clock calibration may not work properly
5548	** if the chip is currently active.
5549	*/
5550	ncr_chip_reset (np);
5551
5552	/*
5553	** Do chip dependent initialization.
5554	*/
5555	(void) ncr_prepare_setting(np, nvram);
5556
5557	/*
5558	** Check the PCI clock frequency if needed.
5559	**
5560	** Must be done after ncr_prepare_setting since it destroys
5561	** STEST1 that is used to probe for the clock multiplier.
5562	**
5563	** The range is currently [22688 - 45375 Khz], given
5564	** the values used by ncr_getclock().
5565	** This calibration of the frequecy measurement
5566	** algorithm against the PCI clock frequency is only
5567	** performed if the driver has had to measure the SCSI
5568	** clock due to other heuristics not having been enough
5569	** to deduce the SCSI clock frequency.
5570	**
5571	** When the chip has been initialized correctly by the
5572	** SCSI BIOS, the driver deduces the presence of the
5573	** clock multiplier and the value of the SCSI clock from
5574	** initial values of IO registers, and therefore no
5575	** clock measurement is performed.
5576	** Normally the driver should never have to measure any
5577	** clock, unless the controller may use a 80 MHz clock
5578	** or has a clock multiplier and any of the following
5579	** condition is met:
5580	**
5581	** - No SCSI BIOS is present.
5582	** - SCSI BIOS did'nt enable the multiplier for some reason.
5583	** - User has disabled the controller from the SCSI BIOS.
5584	** - User booted the O/S from another O/S that did'nt enable
5585	** the multiplier for some reason.
5586	**
5587	** As a result, the driver may only have to measure some
5588	** frequency in very unusual situations.
5589	**
5590	** For this reality test against the PCI clock to really
5591	** protect against flaws in the udelay() calibration or
5592	** driver problem that affect the clock measurement
5593	** algorithm, the actual PCI clock frequency must be 33 MHz.
5594	*/
5595	i = np->pciclock_max ? ncr_getpciclock(np) : 0;
5596	if (i && (i < np->pciclock_min \|\| i > np->pciclock_max)) {
5597	printk(KERN_ERR"<3>" "%s: PCI clock (%u KHz) is out of range "
5598	"[%u KHz - %u KHz].\n",
5599	ncr_name(np), i, np->pciclock_min, np->pciclock_max);
5600	goto attach_error;
5601	}
5602
5603	/*
5604	** Patch script to physical addresses
5605	*/
5606	ncr_script_fill (&script0, &scripth0);
5607
5608	np->p_script = vtobus(np->script0)virt_to_phys(np->script0);
5609	np->p_scripth = vtobus(np->scripth0)virt_to_phys(np->scripth0);
5610	np->p_scripth0 = np->p_scripth;
5611
5612	if (np->base2_ba) {
5613	np->p_script = pcivtobus(np->base2_ba)(np->base2_ba);
5614	if (np->features & FE_RAM8K(1<<16)) {
5615	np->base2_ws = 8192;
5616	np->p_scripth = np->p_script + 4096;
5617	#if BITS_PER_LONG32 > 32
5618	np->scr_ram_seg = cpu_to_scr(np->base2_ba >> 32)(np->base2_ba >> 32);
5619	#endif
5620	}
5621	else
5622	np->base2_ws = 4096;
5623	#ifndef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
5624	np->base2_va = remap_pci_mem(np->base2_ba, np->base2_ws);
5625	if (!np->base2_va) {
5626	printk(KERN_ERR"<3>" "%s: can't map PCI MEMORY region\n",
5627	ncr_name(np));
5628	goto attach_error;
5629	}
5630	#endif
5631	}
5632
5633	ncr_script_copy_and_bind (np, (ncrcmd ) &script0, (ncrcmd ) np->script0, sizeof(struct script));
5634	ncr_script_copy_and_bind (np, (ncrcmd ) &scripth0, (ncrcmd ) np->scripth0, sizeof(struct scripth));
5635
5636	/*
5637	** Patch some variables in SCRIPTS
5638	*/
5639	np->scripth0->pm0_data_addr[0] =
5640	cpu_to_scr(NCB_SCRIPT_PHYS(np, pm0_data))((np->p_script + ((size_t) (&((struct script *)0)-> pm0_data))));
5641	np->scripth0->pm1_data_addr[0] =
5642	cpu_to_scr(NCB_SCRIPT_PHYS(np, pm1_data))((np->p_script + ((size_t) (&((struct script *)0)-> pm1_data))));
5643
5644	/*
5645	** Patch if not Ultra 3 - Do not write to scntl4
5646	*/
5647	if (np->features & FE_ULTRA3(1<<22)) {
5648	np->script0->resel_scntl4[0] = cpu_to_scr(SCR_LOAD_REL (scntl4, 1))((0xe1000000 \| 0x02000000\|0x10000000 \| (((((((size_t) (&( (struct ncr_reg *)0)->nc_scntl4)))) & 0xff) << 16ul )) \| (1)));
5649	np->script0->resel_scntl4[1] = cpu_to_scr(offsetof(struct tcb, uval))(((size_t) (&((struct tcb *)0)->uval)));
5650	}
5651
5652
5653	#ifdef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
5654	np->scripth0->script0_ba[0] = cpu_to_scr(vtobus(np->script0))(virt_to_phys(np->script0));
5655	np->scripth0->script0_ba64[0] = cpu_to_scr(vtobus(np->script0))(virt_to_phys(np->script0));
5656	np->scripth0->scripth0_ba64[0] = cpu_to_scr(vtobus(np->scripth0))(virt_to_phys(np->scripth0));
5657	np->scripth0->ram_seg64[0] = np->scr_ram_seg;
5658	#endif
5659	/*
5660	** Prepare the idle and invalid task actions.
5661	*/
5662	np->idletask.start = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle))((np->p_script + ((size_t) (&((struct script *)0)-> idle))));
5663	np->idletask.restart = cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> bad_i_t_l))));
5664	np->p_idletask = NCB_PHYS(np, idletask)(np->p_ncb + ((size_t) (&((struct ncb *)0)->idletask )));
5665
5666	np->notask.start = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle))((np->p_script + ((size_t) (&((struct script *)0)-> idle))));
5667	np->notask.restart = cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> bad_i_t_l))));
5668	np->p_notask = NCB_PHYS(np, notask)(np->p_ncb + ((size_t) (&((struct ncb *)0)->notask) ));
5669
5670	np->bad_i_t_l.start = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle))((np->p_script + ((size_t) (&((struct script *)0)-> idle))));
5671	np->bad_i_t_l.restart = cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> bad_i_t_l))));
5672	np->p_bad_i_t_l = NCB_PHYS(np, bad_i_t_l)(np->p_ncb + ((size_t) (&((struct ncb *)0)->bad_i_t_l )));
5673
5674	np->bad_i_t_l_q.start = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle))((np->p_script + ((size_t) (&((struct script *)0)-> idle))));
5675	np->bad_i_t_l_q.restart = cpu_to_scr(NCB_SCRIPTH_PHYS (np,bad_i_t_l_q))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> bad_i_t_l_q))));
5676	np->p_bad_i_t_l_q = NCB_PHYS(np, bad_i_t_l_q)(np->p_ncb + ((size_t) (&((struct ncb *)0)->bad_i_t_l_q )));
5677
5678	/*
5679	** Allocate and prepare the bad lun table.
5680	*/
5681	np->badluntbl = m_calloc_dma(256, "BADLUNTBL")m_calloc(256, "BADLUNTBL");
5682	if (!np->badluntbl)
5683	goto attach_error;
5684
5685	assert (offsetof(struct lcb, resel_task) == 0){ if (!(((size_t) (&((struct lcb *)0)->resel_task)) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "offsetof(struct lcb, resel_task) == 0", "../linux/src/drivers/scsi/sym53c8xx.c" , 5685); } };
5686	np->resel_badlun = cpu_to_scr(NCB_SCRIPTH_PHYS(np, resel_bad_lun))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> resel_bad_lun))));
5687
5688	for (i = 0 ; i < 64 ; i++)
5689	np->badluntbl[i] = cpu_to_scr(NCB_PHYS(np, resel_badlun))((np->p_ncb + ((size_t) (&((struct ncb *)0)->resel_badlun ))));
5690
5691	/*
5692	** Prepare the target bus address array.
5693	*/
5694	np->scripth0->targtbl[0] = cpu_to_scr(vtobus(np->targtbl))(virt_to_phys(np->targtbl));
5695	for (i = 0 ; i < MAX_TARGET((16)) ; i++) {
5696	np->targtbl[i] = cpu_to_scr(NCB_PHYS(np, target[i]))((np->p_ncb + ((size_t) (&((struct ncb *)0)->target [i]))));
5697	np->target[i].b_luntbl = cpu_to_scr(vtobus(np->badluntbl))(virt_to_phys(np->badluntbl));
5698	np->target[i].b_lun0 = cpu_to_scr(NCB_PHYS(np, resel_badlun))((np->p_ncb + ((size_t) (&((struct ncb *)0)->resel_badlun ))));
5699	}
5700
5701	/*
5702	** Patch the script for LED support.
5703	*/
5704
5705	if (np->features & FE_LED0(1<<0)) {
5706	np->script0->idle[0] =
5707	cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01))((0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_gpreg)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_gpreg)))) & 0x80))) \| (0x02000000 ) \| (((0x01)&0xff)<<8ul)));
5708	np->script0->reselected[0] =
5709	cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe))((0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_gpreg)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_gpreg)))) & 0x80))) \| (0x04000000 ) \| (((0xfe)&0xff)<<8ul)));
5710	np->script0->start[0] =
5711	cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe))((0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_gpreg)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_gpreg)))) & 0x80))) \| (0x04000000 ) \| (((0xfe)&0xff)<<8ul)));
5712	}
5713
5714	/*
5715	** Patch the script to provide an extra clock cycle on
5716	** data out phase - 53C1010_66MHz part only.
5717	*/
5718	if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21){
5719	np->script0->datao_phase[0] =
5720	cpu_to_scr(SCR_REG_REG(scntl4, SCR_OR, 0x0c))((0x78000000 \| ((((((((size_t) (&((struct ncr_reg )0)-> nc_scntl4)))) & 0x7f) << 16ul) + (((((size_t) (& ((struct ncr_reg )0)->nc_scntl4)))) & 0x80))) \| (0x02000000 ) \| (((0x0c)&0xff)<<8ul)));
5721	}
5722
5723	#ifdef SCSI_NCR_IARB_SUPPORT
5724	/*
5725	** If user does not want to use IMMEDIATE ARBITRATION
5726	** when we are reselected while attempting to arbitrate,
5727	** patch the SCRIPTS accordingly with a SCRIPT NO_OP.
5728	*/
5729	if (!(driver_setup.iarb & 1))
5730	np->script0->ungetjob[0] = cpu_to_scr(SCR_NO_OP)(0x80000000);
5731	/*
5732	** If user wants IARB to be set when we win arbitration
5733	** and have other jobs, compute the max number of consecutive
5734	** settings of IARB hint before we leave devices a chance to
5735	** arbitrate for reselection.
5736	*/
5737	np->iarb_max = (driver_setup.iarb >> 4);
5738	#endif
5739
5740	/*
5741	** DEL 472 - 53C896 Rev 1 - Part Number 609-0393055 - ITEM 5.
5742	*/
5743	if (np->device_id == PCI_DEVICE_ID_NCR_53C8960x000b &&
5744	np->revision_id <= 0x1 && (np->features & FE_NOPM(1<<19))) {
5745	np->scatter = ncr_scatter_896R1;
5746	np->script0->datai_phase[0] = cpu_to_scr(SCR_JUMP)(0x80080000);
5747	np->script0->datai_phase[1] =
5748	cpu_to_scr(NCB_SCRIPTH_PHYS (np, tweak_pmj))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> tweak_pmj))));
5749	np->script0->datao_phase[0] = cpu_to_scr(SCR_JUMP)(0x80080000);
5750	np->script0->datao_phase[1] =
5751	cpu_to_scr(NCB_SCRIPTH_PHYS (np, tweak_pmj))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> tweak_pmj))));
5752	}
5753	else
5754	#ifdef DEBUG_896R1
5755	np->scatter = ncr_scatter_896R1;
5756	#else
5757	np->scatter = ncr_scatter;
5758	#endif
5759
5760	/*
5761	** Reset chip.
5762	** We should use ncr_soft_reset(), but we donnot want to do
5763	** so, since we may not be safe if ABRT interrupt occurs due
5764	** to the BIOS or previous O/S having enable this interrupt.
5765	**
5766	** For C1010 need to set ABRT bit prior to SRST if SCRIPTs
5767	** are running. Not true in this case.
5768	*/
5769	ncr_chip_reset(np);
5770
5771	/*
5772	** Now check the cache handling of the pci chipset.
5773	*/
5774
5775	if (ncr_snooptest (np)) {
5776	printk (KERN_ERR"<3>" "CACHE INCORRECTLY CONFIGURED.\n");
5777	goto attach_error;
5778	};
5779
5780	/*
5781	** Install the interrupt handler.
5782	** If we synchonize the C code with SCRIPTS on interrupt,
5783	** we donnot want to share the INTR line at all.
5784	*/
5785	if (request_irq(device->slot.irq, sym53c8xx_intr,
5786	#ifdef SCSI_NCR_PCIQ_SYNC_ON_INTR
5787	((driver_setup.irqm & 0x20) ? 0 : SA_INTERRUPT0x20000000),
5788	#else
5789	((driver_setup.irqm & 0x10) ? 0 : SA_SHIRQ0x04000000) \|
5790
5791	#if 0 && LINUX_VERSION_CODE131108 < LinuxVersionCode(2,2,0)(((2)<<16)+((2)<<8)+(0))
5792	((driver_setup.irqm & 0x20) ? 0 : SA_INTERRUPT0x20000000),
5793	#else
5794	0,
5795	#endif
5796	#endif
5797	NAME53C8XX"sym53c8xx", np)) {
5798	printk(KERN_ERR"<3>" "%s: request irq %d failure\n",
5799	ncr_name(np), device->slot.irq);
5800	goto attach_error;
5801	}
5802	np->irq = device->slot.irq;
5803
5804	/*
5805	** After SCSI devices have been opened, we cannot
5806	** reset the bus safely, so we do it here.
5807	** Interrupt handler does the real work.
5808	** Process the reset exception,
5809	** if interrupts are not enabled yet.
5810	** Then enable disconnects.
5811	*/
5812	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
5813	if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) {
5814	printk(KERN_ERR"<3>" "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np));
5815
5816	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
5817	goto attach_error;
5818	}
5819	ncr_exception (np);
5820
5821	/*
5822	** The middle-level SCSI driver does not
5823	** wait for devices to settle.
5824	** Wait synchronously if more than 2 seconds.
5825	*/
5826	if (driver_setup.settle_delay > 2) {
5827	printk(KERN_INFO"<6>" "%s: waiting %d seconds for scsi devices to settle...\n",
5828	ncr_name(np), driver_setup.settle_delay);
5829	MDELAY (1000 * driver_setup.settle_delay);
5830	}
5831
5832	/*
5833	** start the timeout daemon
5834	*/
5835	np->lasttime=0;
5836	ncr_timeout (np);
5837
5838	/*
5839	** use SIMPLE TAG messages by default
5840	*/
5841	#ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG
5842	np->order = M_SIMPLE_TAG(0x20);
5843	#endif
5844
5845	/*
5846	** Done.
5847	*/
5848	if (!first_host)
5849	first_host = instance;
5850
5851	/*
5852	** Fill Linux host instance structure
5853	** and return success.
5854	*/
5855	instance->max_channel = 0;
5856	instance->this_id = np->myaddr;
5857	instance->max_id = np->maxwide ? 16 : 8;
5858	instance->max_lun = MAX_LUN64;
5859	#ifndef SCSI_NCR_IOMAPPED
5860	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,3,29)(((2)<<16)+((3)<<8)+(29))
5861	instance->base = (unsigned long) np->reg;
5862	#else
5863	instance->base = (char *) np->reg;
5864	#endif
5865	#endif
5866	instance->irq = np->irq;
5867	instance->unique_id = np->base_io;
5868	instance->io_port = np->base_io;
5869	instance->n_io_port = np->base_ws;
5870	instance->dma_channel = 0;
5871	instance->cmd_per_lun = MAX_TAGS(8);
5872	instance->can_queue = (MAX_START((8(8) + 2(16)) + 4)-4);
5873
5874	np->check_integrity = 0;
5875
5876	#ifdef SCSI_NCR_INTEGRITY_CHECKING
5877	instance->check_integrity = 0;
5878
5879	#ifdef SCSI_NCR_ENABLE_INTEGRITY_CHECK
5880	if ( !(driver_setup.bus_check & 0x04) ) {
5881	np->check_integrity = 1;
5882	instance->check_integrity = 1;
5883	}
5884	#endif
5885	#endif
5886
5887	instance->select_queue_depths = sym53c8xx_select_queue_depths;
5888
5889	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
5890
5891	/*
5892	** Now let the generic SCSI driver
5893	** look for the SCSI devices on the bus ..
5894	*/
5895	return 0;
5896
5897	attach_error:
5898	if (!instance) return -1;
5899	printk(KERN_INFO"<6>" "%s: giving up ...\n", ncr_name(np));
5900	if (np)
5901	ncr_free_resources(np);
5902	scsi_unregister(instance);
5903
5904	return -1;
5905	}
5906
5907
5908	/*
5909	** Free controller resources.
5910	*/
5911	static void ncr_free_resources(ncb_p np)
5912	{
5913	ccb_p cp;
5914	tcb_p tp;
5915	lcb_p lp;
5916	int target, lun;
5917
5918	if (np->irq)
5919	free_irq(np->irq, np);
5920	if (np->base_io)
5921	release_region(np->base_io, np->base_ws);
5922	#ifndef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
5923	if (np->base_va)
5924	unmap_pci_mem(np->base_va, np->base_ws);
5925	if (np->base2_va)
5926	unmap_pci_mem(np->base2_va, np->base2_ws);
5927	#endif
5928	if (np->scripth0)
5929	m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH")m_free(np->scripth0, sizeof(struct scripth), "SCRIPTH");
5930	if (np->script0)
5931	m_free_dma(np->script0, sizeof(struct script), "SCRIPT")m_free(np->script0, sizeof(struct script), "SCRIPT");
5932	if (np->squeue)
5933	m_free_dma(np->squeue, sizeof(ncrcmd)(MAX_START2), "SQUEUE")m_free(np->squeue, sizeof(ncrcmd)(((8(8) + 2(16)) + 4) 2), "SQUEUE");
5934	if (np->dqueue)
5935	m_free_dma(np->dqueue, sizeof(ncrcmd)(MAX_START2),"DQUEUE")m_free(np->dqueue, sizeof(ncrcmd)(((8(8) + 2(16)) + 4) 2), "DQUEUE");
5936
5937	while ((cp = np->ccbc) != NULL((void *) 0)) {
5938	np->ccbc = cp->link_ccb;
5939	m_free_dma(cp, sizeof(cp), "CCB")m_free(cp, sizeof(cp), "CCB");
5940	}
5941
5942	if (np->badluntbl)
5943	m_free_dma(np->badluntbl, 256,"BADLUNTBL")m_free(np->badluntbl, 256, "BADLUNTBL");
5944
5945	for (target = 0; target < MAX_TARGET((16)) ; target++) {
5946	tp = &np->target[target];
5947	for (lun = 0 ; lun < MAX_LUN64 ; lun++) {
5948	lp = ncr_lp(np, tp, lun)(!lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(lun)] : 0;
5949	if (!lp)
5950	continue;
5951	if (lp->tasktbl != &lp->tasktbl_0)
5952	m_free_dma(lp->tasktbl, MAX_TASKS4, "TASKTBL")m_free(lp->tasktbl, (256/4)4, "TASKTBL");
5953	if (lp->cb_tags)
5954	m_free(lp->cb_tags, MAX_TAGS(8), "CB_TAGS");
5955	m_free_dma(lp, sizeof(lp), "LCB")m_free(lp, sizeof(lp), "LCB");
5956	}
5957	#if MAX_LUN64 > 1
5958	if (tp->lmp)
5959	m_free(tp->lmp, MAX_LUN64 * sizeof(lcb_p), "LMP");
5960	if (tp->luntbl)
5961	m_free_dma(tp->luntbl, 256, "LUNTBL")m_free(tp->luntbl, 256, "LUNTBL");
5962	#endif
5963	}
5964
5965	if (np->targtbl)
5966	m_free_dma(np->targtbl, 256, "TARGTBL")m_free(np->targtbl, 256, "TARGTBL");
5967
5968	m_free_dma(np, sizeof(np), "NCB")m_free(np, sizeof(np), "NCB");
5969	}
5970
5971
5972	/*==========================================================
5973	**
5974	**
5975	** Done SCSI commands list management.
5976	**
5977	** We donnot enter the scsi_done() callback immediately
5978	** after a command has been seen as completed but we
5979	** insert it into a list which is flushed outside any kind
5980	** of driver critical section.
5981	** This allows to do minimal stuff under interrupt and
5982	** inside critical sections and to also avoid locking up
5983	** on recursive calls to driver entry points under SMP.
5984	** In fact, the only kernel point which is entered by the
5985	** driver with a driver lock set is get_free_pages(GFP_ATOMIC...)
5986	** that shall not reenter the driver under any circumstance.
5987	**
5988	**==========================================================
5989	*/
5990	static inlineinline __attribute__((always_inline)) void ncr_queue_done_cmd(ncb_p np, Scsi_Cmnd *cmd)
5991	{
5992	unmap_scsi_data(np, cmd)do {; } while (0);
5993	cmd->host_scribble = (char *) np->done_list;
5994	np->done_list = cmd;
5995	}
5996
5997	static inlineinline __attribute__((always_inline)) void ncr_flush_done_cmds(Scsi_Cmnd *lcmd)
5998	{
5999	Scsi_Cmnd *cmd;
6000
6001	while (lcmd) {
6002	cmd = lcmd;
6003	lcmd = (Scsi_Cmnd *) cmd->host_scribble;
6004	cmd->scsi_done(cmd);
6005	}
6006	}
6007
6008	/*==========================================================
6009	**
6010	**
6011	** Prepare the next negotiation message for integrity check,
6012	** if needed.
6013	**
6014	** Fill in the part of message buffer that contains the
6015	** negotiation and the nego_status field of the CCB.
6016	** Returns the size of the message in bytes.
6017	**
6018	** If tp->ppr_negotiation is 1 and a M_REJECT occurs, then
6019	** we disable ppr_negotiation. If the first ppr_negotiation is
6020	** successful, set this flag to 2.
6021	**
6022	**==========================================================
6023	*/
6024	#ifdef SCSI_NCR_INTEGRITY_CHECKING
6025	static int ncr_ic_nego(ncb_p np, ccb_p cp, Scsi_Cmnd cmd, u_charunsigned char msgptr)
6026	{
6027	tcb_p tp = &np->target[cp->target];
6028	int msglen = 0;
6029	int nego = 0;
6030	u_charunsigned char new_width, new_offset, new_period;
6031	u_charunsigned char no_increase;
6032
6033	if (tp->ppr_negotiation == 1) /* PPR message successful */
6034	tp->ppr_negotiation = 2;
6035
6036	if (tp->inq_done) {
6037
6038	if (!tp->ic_maximums_set) {
6039	tp->ic_maximums_set = 1;
6040
6041	/*
6042	* Check against target, host and user limits
6043	*/
6044	if ( (tp->inq_byte7 & INQ7_WIDE16(0x20)) &&
6045	np->maxwide && tp->usrwide)
6046	tp->ic_max_width = 1;
6047	else
6048	tp->ic_max_width = 0;
6049
6050
6051	if ((tp->inq_byte7 & INQ7_SYNC(0x10)) && tp->maxoffs)
6052	tp->ic_min_sync = (tp->minsync < np->minsync) ?
6053	np->minsync : tp->minsync;
6054	else
6055	tp->ic_min_sync = 255;
6056
6057	tp->period = 1;
6058	tp->widedone = 1;
6059
6060	/*
6061	* Enable PPR negotiation - only if Ultra3 support
6062	* is accessible.
6063	*/
6064
6065	#if 0
6066	if (tp->ic_max_width && (tp->ic_min_sync != 255 ))
6067	tp->ppr_negotiation = 1;
6068	#endif
6069	tp->ppr_negotiation = 0;
6070	if (np->features & FE_ULTRA3(1<<22)) {
6071	if (tp->ic_max_width && (tp->ic_min_sync == 0x09))
6072	tp->ppr_negotiation = 1;
6073	}
6074
6075	if (!tp->ppr_negotiation)
6076	cmd->ic_nego &= ~NS_PPR(4);
6077	}
6078
6079	if (DEBUG_FLAGSncr_debug & DEBUG_IC(0x0800)) {
6080	printk("%s: cmd->ic_nego %d, 1st byte 0x%2X\n",
6081	ncr_name(np), cmd->ic_nego, cmd->cmnd[0]);
6082	}
6083
6084	/* Previous command recorded a parity or an initiator
6085	* detected error condition. Force bus to narrow for this
6086	* target. Clear flag. Negotation on request sense.
6087	* Note: kernel forces 2 bus resets :o( but clears itself out.
6088	* Minor bug? in scsi_obsolete.c (ugly)
6089	*/
6090	if (np->check_integ_par) {
6091	printk("%s: Parity Error. Target set to narrow.\n",
6092	ncr_name(np));
6093	tp->ic_max_width = 0;
6094	tp->widedone = tp->period = 0;
6095	}
6096
6097	/* Initializing:
6098	* If ic_nego == NS_PPR, we are in the initial test for
6099	* PPR messaging support. If driver flag is clear, then
6100	* either we don't support PPR nego (narrow or async device)
6101	* or this is the second TUR and we have had a M. REJECT
6102	* or unexpected disconnect on the first PPR negotiation.
6103	* Do not negotiate, reset nego flags (in case a reset has
6104	* occurred), clear ic_nego and return.
6105	* General case: Kernel will clear flag on a fallback.
6106	* Do only SDTR or WDTR in the future.
6107	*/
6108	if (!tp->ppr_negotiation && (cmd->ic_nego == NS_PPR(4) )) {
6109	tp->ppr_negotiation = 0;
6110	cmd->ic_nego &= ~NS_PPR(4);
6111	tp->widedone = tp->period = 1;
6112	return msglen;
6113	}
6114	else if (( tp->ppr_negotiation && !(cmd->ic_nego & NS_PPR(4) )) \|\|
6115	(!tp->ppr_negotiation && (cmd->ic_nego & NS_PPR(4) )) ) {
6116	tp->ppr_negotiation = 0;
6117	cmd->ic_nego &= ~NS_PPR(4);
6118	}
6119
6120	/*
6121	* Always check the PPR nego. flag bit if ppr_negotiation
6122	* is set. If the ic_nego PPR bit is clear,
6123	* there must have been a fallback. Do only
6124	* WDTR / SDTR in the future.
6125	*/
6126	if ((tp->ppr_negotiation) && (!(cmd->ic_nego & NS_PPR(4))))
6127	tp->ppr_negotiation = 0;
6128
6129	/* In case of a bus reset, ncr_negotiate will reset
6130	* the flags tp->widedone and tp->period to 0, forcing
6131	* a new negotiation. Do WDTR then SDTR. If PPR, do both.
6132	* Do NOT increase the period. It is possible for the Scsi_Cmnd
6133	* flags to be set to increase the period when a bus reset
6134	* occurs - we don't want to change anything.
6135	*/
6136
6137	no_increase = 0;
6138
6139	if (tp->ppr_negotiation && (!tp->widedone) && (!tp->period) ) {
6140	cmd->ic_nego = NS_PPR(4);
6141	tp->widedone = tp->period = 1;
6142	no_increase = 1;
6143	}
6144	else if (!tp->widedone) {
6145	cmd->ic_nego = NS_WIDE(2);
6146	tp->widedone = 1;
6147	no_increase = 1;
6148	}
6149	else if (!tp->period) {
6150	cmd->ic_nego = NS_SYNC(1);
6151	tp->period = 1;
6152	no_increase = 1;
6153	}
6154
6155	new_width = cmd->ic_nego_width & tp->ic_max_width;
6156
6157	switch (cmd->ic_nego_sync) {
6158	case 2: /* increase the period */
6159	if (!no_increase) {
6160	if (tp->ic_min_sync <= 0x09)
6161	tp->ic_min_sync = 0x0A;
6162	else if (tp->ic_min_sync <= 0x0A)
6163	tp->ic_min_sync = 0x0C;
6164	else if (tp->ic_min_sync <= 0x0C)
6165	tp->ic_min_sync = 0x19;
6166	else if (tp->ic_min_sync <= 0x19)
6167	tp->ic_min_sync *= 2;
6168	else {
6169	tp->ic_min_sync = 255;
6170	cmd->ic_nego_sync = 0;
6171	tp->maxoffs = 0;
6172	}
6173	}
6174	new_period = tp->maxoffs?tp->ic_min_sync:0;
6175	new_offset = tp->maxoffs;
6176	break;
6177
6178	case 1: /* nego. to maximum */
6179	new_period = tp->maxoffs?tp->ic_min_sync:0;
6180	new_offset = tp->maxoffs;
6181	break;
6182
6183	case 0: /* nego to async */
6184	default:
6185	new_period = 0;
6186	new_offset = 0;
6187	break;
6188	};
6189
6190
6191	nego = NS_NOCHANGE(0);
6192	if (tp->ppr_negotiation) {
6193	u_charunsigned char options_byte = 0;
6194
6195	/*
6196	** Must make sure data is consistent.
6197	** If period is 9 and sync, must be wide and DT bit set.
6198	** else period must be larger. If the width is 0,
6199	** reset bus to wide but increase the period to 0x0A.
6200	** Note: The strange else clause is due to the integrity check.
6201	** If fails at 0x09, wide, the I.C. code will redo at the same
6202	** speed but a narrow bus. The driver must take care of slowing
6203	** the bus speed down.
6204	**
6205	** The maximum offset in ST mode is 31, in DT mode 62 (1010/1010_66 only)
6206	*/
6207	if ( (new_period==0x09) && new_offset) {
6208	if (new_width)
6209	options_byte = 0x02;
6210	else {
6211	tp->ic_min_sync = 0x0A;
6212	new_period = 0x0A;
6213	cmd->ic_nego_width = 1;
6214	new_width = 1;
6215	new_offset &= 0x1f;
6216	}
6217	}
6218	else if (new_period > 0x09)
6219	new_offset &= 0x1f;
6220
6221	nego = NS_PPR(4);
6222
6223	msgptr[msglen++] = M_EXTENDED(0x01);
6224	msgptr[msglen++] = 6;
6225	msgptr[msglen++] = M_X_PPR_REQ(0x04);
6226	msgptr[msglen++] = new_period;
6227	msgptr[msglen++] = 0;
6228	msgptr[msglen++] = new_offset;
6229	msgptr[msglen++] = new_width;
6230	msgptr[msglen++] = options_byte;
6231
6232	}
6233	else {
6234	switch (cmd->ic_nego & ~NS_PPR(4)) {
6235	case NS_WIDE(2):
6236	/*
6237	** WDTR negotiation on if device supports
6238	** wide or if wide device forced narrow
6239	** due to a parity error.
6240	*/
6241
6242	cmd->ic_nego_width &= tp->ic_max_width;
6243
6244	if (tp->ic_max_width \| np->check_integ_par) {
6245	nego = NS_WIDE(2);
6246	msgptr[msglen++] = M_EXTENDED(0x01);
6247	msgptr[msglen++] = 2;
6248	msgptr[msglen++] = M_X_WIDE_REQ(0x03);
6249	msgptr[msglen++] = new_width;
6250	}
6251	break;
6252
6253	case NS_SYNC(1):
6254	/*
6255	** negotiate synchronous transfers
6256	** Target must support sync transfers.
6257	** Min. period = 0x0A, maximum offset of 31=0x1f.
6258	*/
6259
6260	if (tp->inq_byte7 & INQ7_SYNC(0x10)) {
6261
6262	if (new_offset && (new_period < 0x0A)) {
6263	tp->ic_min_sync = 0x0A;
6264	new_period = 0x0A;
6265	}
6266	nego = NS_SYNC(1);
6267	msgptr[msglen++] = M_EXTENDED(0x01);
6268	msgptr[msglen++] = 3;
6269	msgptr[msglen++] = M_X_SYNC_REQ(0x01);
6270	msgptr[msglen++] = new_period;
6271	msgptr[msglen++] = new_offset & 0x1f;
6272	}
6273	else
6274	cmd->ic_nego_sync = 0;
6275	break;
6276
6277	case NS_NOCHANGE(0):
6278	break;
6279	}
6280	}
6281
6282	};
6283
6284	cp->nego_status = nego;
6285	np->check_integ_par = 0;
6286
6287	if (nego) {
6288	tp->nego_cp = cp;
6289	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
6290	ncr_print_msg(cp, nego == NS_WIDE(2) ?
6291	"wide/narrow msgout":
6292	(nego == NS_SYNC(1) ? "sync/async msgout" : "ppr msgout"),
6293	msgptr);
6294	};
6295	};
6296
6297	return msglen;
6298	}
6299	#endif /* SCSI_NCR_INTEGRITY_CHECKING */
6300
6301	/*==========================================================
6302	**
6303	**
6304	** Prepare the next negotiation message if needed.
6305	**
6306	** Fill in the part of message buffer that contains the
6307	** negotiation and the nego_status field of the CCB.
6308	** Returns the size of the message in bytes.
6309	**
6310	**
6311	**==========================================================
6312	*/
6313
6314
6315	static int ncr_prepare_nego(ncb_p np, ccb_p cp, u_charunsigned char *msgptr)
6316	{
6317	tcb_p tp = &np->target[cp->target];
6318	int msglen = 0;
6319	int nego = 0;
6320	u_charunsigned char width, offset, factor, last_byte;
6321
6322	if (!np->check_integrity) {
6323	/* If integrity checking disabled, enable PPR messaging
6324	* if device supports wide, sync and ultra 3
6325	*/
6326	if (tp->ppr_negotiation == 1) /* PPR message successful */
6327	tp->ppr_negotiation = 2;
6328
6329	if ((tp->inq_done) && (!tp->ic_maximums_set)) {
6330	tp->ic_maximums_set = 1;
6331
6332	/*
6333	* Issue PPR only if board is capable
6334	* and set-up for Ultra3 transfers.
6335	*/
6336	tp->ppr_negotiation = 0;
6337	if ( (np->features & FE_ULTRA3(1<<22)) &&
6338	(tp->usrwide) && (tp->maxoffs) &&
6339	(tp->minsync == 0x09) )
6340	tp->ppr_negotiation = 1;
6341	}
6342	}
6343
6344	if (tp->inq_done) {
6345	/*
6346	* Get the current width, offset and period
6347	*/
6348	ncr_get_xfer_info( np, tp, &factor,
6349	&offset, &width);
6350
6351	/*
6352	** negotiate wide transfers ?
6353	*/
6354
6355	if (!tp->widedone) {
6356	if (tp->inq_byte7 & INQ7_WIDE16(0x20)) {
6357	if (tp->ppr_negotiation)
6358	nego = NS_PPR(4);
6359	else
6360	nego = NS_WIDE(2);
6361
6362	width = tp->usrwide;
6363	#ifdef SCSI_NCR_INTEGRITY_CHECKING
6364	if (tp->ic_done)
6365	width &= tp->ic_max_width;
6366	#endif
6367	} else
6368	tp->widedone=1;
6369
6370	};
6371
6372	/*
6373	** negotiate synchronous transfers?
6374	*/
6375
6376	if ((nego != NS_WIDE(2)) && !tp->period) {
6377	if (tp->inq_byte7 & INQ7_SYNC(0x10)) {
6378	if (tp->ppr_negotiation)
6379	nego = NS_PPR(4);
6380	else
6381	nego = NS_SYNC(1);
6382
6383	/* Check for async flag */
6384	if (tp->maxoffs == 0) {
6385	offset = 0;
6386	factor = 0;
6387	}
6388	else {
6389	offset = tp->maxoffs;
6390	factor = tp->minsync;
6391	#ifdef SCSI_NCR_INTEGRITY_CHECKING
6392	if ((tp->ic_done) &&
6393	(factor < tp->ic_min_sync))
6394	factor = tp->ic_min_sync;
6395	#endif
6396	}
6397
6398	} else {
6399	offset = 0;
6400	factor = 0;
6401	tp->period =0xffff;
6402	PRINT_TARGET(np, cp->target);
6403	printk ("target did not report SYNC.\n");
6404	};
6405	};
6406	};
6407
6408	switch (nego) {
6409	case NS_PPR(4):
6410	/*
6411	** Must make sure data is consistent.
6412	** If period is 9 and sync, must be wide and DT bit set
6413	** else period must be larger.
6414	** Maximum offset is 31=0x1f is ST mode, 62 if DT mode
6415	*/
6416	last_byte = 0;
6417	if ( (factor==9) && offset) {
6418	if (!width) {
6419	factor = 0x0A;
6420	offset &= 0x1f;
6421	}
6422	else
6423	last_byte = 0x02;
6424	}
6425	else if (factor > 0x09)
6426	offset &= 0x1f;
6427
6428	msgptr[msglen++] = M_EXTENDED(0x01);
6429	msgptr[msglen++] = 6;
6430	msgptr[msglen++] = M_X_PPR_REQ(0x04);
6431	msgptr[msglen++] = factor;
6432	msgptr[msglen++] = 0;
6433	msgptr[msglen++] = offset;
6434	msgptr[msglen++] = width;
6435	msgptr[msglen++] = last_byte;
6436	break;
6437	case NS_SYNC(1):
6438	/*
6439	** Never negotiate faster than Ultra 2 (25ns periods)
6440	*/
6441	if (offset && (factor < 0x0A)) {
6442	factor = 0x0A;
6443	tp->minsync = 0x0A;
6444	}
6445
6446	msgptr[msglen++] = M_EXTENDED(0x01);
6447	msgptr[msglen++] = 3;
6448	msgptr[msglen++] = M_X_SYNC_REQ(0x01);
6449	msgptr[msglen++] = factor;
6450	msgptr[msglen++] = offset & 0x1f;
6451	break;
6452	case NS_WIDE(2):
6453	msgptr[msglen++] = M_EXTENDED(0x01);
6454	msgptr[msglen++] = 2;
6455	msgptr[msglen++] = M_X_WIDE_REQ(0x03);
6456	msgptr[msglen++] = width;
6457	break;
6458	};
6459
6460	cp->nego_status = nego;
6461
6462	if (nego) {
6463	tp->nego_cp = cp;
6464	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
6465	ncr_print_msg(cp, nego == NS_WIDE(2) ?
6466	"wide msgout":
6467	(nego == NS_SYNC(1) ? "sync msgout" : "ppr msgout"),
6468	msgptr);
6469	};
6470	};
6471
6472	return msglen;
6473	}
6474
6475	/*==========================================================
6476	**
6477	**
6478	** Start execution of a SCSI command.
6479	** This is called from the generic SCSI driver.
6480	**
6481	**
6482	**==========================================================
6483	*/
6484	static int ncr_queue_command (ncb_p np, Scsi_Cmnd *cmd)
6485	{
6486	/* Scsi_Device device = cmd->device; /
6487	tcb_p tp = &np->target[cmd->target];
6488	lcb_p lp = ncr_lp(np, tp, cmd->lun)(!cmd->lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[( cmd->lun)] : 0;
6489	ccb_p cp;
6490
6491	u_charunsigned char idmsg, *msgptr;
6492	u_intunsigned int msglen;
6493	int direction;
6494	u_int32 lastp, goalp;
6495
6496	/*---------------------------------------------
6497	**
6498	** Some shortcuts ...
6499	**
6500	**---------------------------------------------
6501	*/
6502	if ((cmd->target == np->myaddr ) \|\|
6503	(cmd->target >= MAX_TARGET((16))) \|\|
6504	(cmd->lun >= MAX_LUN64 )) {
6505	return(DID_BAD_TARGET0x04);
6506	}
6507
6508	/*---------------------------------------------
6509	**
6510	** Complete the 1st TEST UNIT READY command
6511	** with error condition if the device is
6512	** flagged NOSCAN, in order to speed up
6513	** the boot.
6514	**
6515	**---------------------------------------------
6516	*/
6517	if (cmd->cmnd[0] == 0 && (tp->usrflag & UF_NOSCAN(0x04))) {
6518	tp->usrflag &= ~UF_NOSCAN(0x04);
6519	return DID_BAD_TARGET0x04;
6520	}
6521
6522	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) {
6523	PRINT_ADDR(cmd);
6524	printk ("CMD=%x ", cmd->cmnd[0]);
6525	}
6526
6527	/*---------------------------------------------------
6528	**
6529	** Assign a ccb / bind cmd.
6530	** If resetting, shorten settle_time if necessary
6531	** in order to avoid spurious timeouts.
6532	** If resetting or no free ccb,
6533	** insert cmd into the waiting list.
6534	**
6535	**----------------------------------------------------
6536	*/
6537	if (np->settle_time && cmd->timeout_per_command >= HZ100) {
6538	u_longunsigned long tlimit = ktime_get(cmd->timeout_per_command - HZ)(jiffies + (unsigned long) cmd->timeout_per_command - 100);
6539	if (ktime_dif(np->settle_time, tlimit)((long)(np->settle_time) - (long)(tlimit)) > 0)
6540	np->settle_time = tlimit;
6541	}
6542
6543	if (np->settle_time \|\| !(cp=ncr_get_ccb (np, cmd->target, cmd->lun))) {
6544	insert_into_waiting_list(np, cmd);
6545	return(DID_OK0x00);
6546	}
6547	cp->cmd = cmd;
6548
6549	/*---------------------------------------------------
6550	**
6551	** Enable tagged queue if asked by scsi ioctl
6552	**
6553	**----------------------------------------------------
6554	*/
6555	#if 0 /* This stuff was only usefull for linux-1.2.13 */
6556	if (lp && !lp->numtags && cmd->device && cmd->device->tagged_queue) {
6557	lp->numtags = tp->usrtags;
6558	ncr_setup_tags (np, cp->target, cp->lun);
6559	}
6560	#endif
6561
6562	/*----------------------------------------------------
6563	**
6564	** Build the identify / tag / sdtr message
6565	**
6566	**----------------------------------------------------
6567	*/
6568
6569	idmsg = M_IDENTIFY(0x80) \| cp->lun;
6570
6571	if (cp ->tag != NO_TAG(256) \|\| (lp && !(tp->usrflag & UF_NODISC(0x02))))
6572	idmsg \|= 0x40;
6573
6574	msgptr = cp->scsi_smsg;
6575	msglen = 0;
6576	msgptr[msglen++] = idmsg;
6577
6578	if (cp->tag != NO_TAG(256)) {
6579	char order = np->order;
6580
6581	/*
6582	** Force ordered tag if necessary to avoid timeouts
6583	** and to preserve interactivity.
6584	*/
6585	if (lp && ktime_exp(lp->tags_stime)((long)(jiffies) - (long)(lp->tags_stime) >= 0)) {
6586	lp->tags_si = !(lp->tags_si);
6587	if (lp->tags_sum[lp->tags_si]) {
6588	order = M_ORDERED_TAG(0x22);
6589	if ((DEBUG_FLAGSncr_debug & DEBUG_TAGS(0x0400))\|\|bootverbose(np->verbose)>0){
6590	PRINT_ADDR(cmd);
6591	printk("ordered tag forced.\n");
6592	}
6593	}
6594	lp->tags_stime = ktime_get(3HZ)(jiffies + (unsigned long) 3100);
6595	}
6596
6597	if (order == 0) {
6598	/*
6599	** Ordered write ops, unordered read ops.
6600	*/
6601	switch (cmd->cmnd[0]) {
6602	case 0x08: /* READ_SMALL (6) */
6603	case 0x28: /* READ_BIG (10) */
6604	case 0xa8: /* READ_HUGE (12) */
6605	order = M_SIMPLE_TAG(0x20);
6606	break;
6607	default:
6608	order = M_ORDERED_TAG(0x22);
6609	}
6610	}
6611	msgptr[msglen++] = order;
6612	/*
6613	** For less than 128 tags, actual tags are numbered
6614	** 1,3,5,..2*MAXTAGS+1,since we may have to deal
6615	** with devices that have problems with #TAG 0 or too
6616	** great #TAG numbers. For more tags (up to 256),
6617	** we use directly our tag number.
6618	*/
6619	#if MAX_TASKS(256/4) > (512/4)
6620	msgptr[msglen++] = cp->tag;
6621	#else
6622	msgptr[msglen++] = (cp->tag << 1) + 1;
6623	#endif
6624	}
6625
6626	cp->host_flagsphys.header.status[3] = 0;
6627
6628	/*----------------------------------------------------
6629	**
6630	** Build the data descriptors
6631	**
6632	**----------------------------------------------------
6633	*/
6634
6635	direction = scsi_data_direction(cmd);
6636	if (direction != SCSI_DATA_NONE3) {
6637	cp->segments = np->scatter (np, cp, cp->cmd);
6638	if (cp->segments < 0) {
6639	ncr_free_ccb(np, cp);
6640	return(DID_ERROR0x07);
6641	}
6642	}
6643	else {
6644	cp->data_len = 0;
6645	cp->segments = 0;
6646	}
6647
6648	/*---------------------------------------------------
6649	**
6650	** negotiation required?
6651	**
6652	** (nego_status is filled by ncr_prepare_nego())
6653	**
6654	**---------------------------------------------------
6655	*/
6656
6657	cp->nego_status = 0;
6658
6659	#ifdef SCSI_NCR_INTEGRITY_CHECKING
6660	if ((np->check_integrity && tp->ic_done) \|\| !np->check_integrity) {
6661	if ((!tp->widedone \|\| !tp->period) && !tp->nego_cp && lp) {
6662	msglen += ncr_prepare_nego (np, cp, msgptr + msglen);
6663	}
6664	}
6665	else if (np->check_integrity && (cmd->ic_in_progress)) {
6666	msglen += ncr_ic_nego (np, cp, cmd, msgptr + msglen);
6667	}
6668	else if (np->check_integrity && cmd->ic_complete) {
6669	u_longunsigned long current_period;
6670	u_charunsigned char current_offset, current_width, current_factor;
6671
6672	ncr_get_xfer_info (np, tp, &current_factor,
6673	&current_offset, &current_width);
6674
6675	tp->ic_max_width = current_width;
6676	tp->ic_min_sync = current_factor;
6677
6678	if (current_factor == 9) current_period = 125;
6679	else if (current_factor == 10) current_period = 250;
6680	else if (current_factor == 11) current_period = 303;
6681	else if (current_factor == 12) current_period = 500;
6682	else current_period = current_factor * 40;
6683
6684	/*
6685	* Negotiation for this target is complete. Update flags.
6686	*/
6687	tp->period = current_period;
6688	tp->widedone = 1;
6689	tp->ic_done = 1;
6690
6691	printk("%s: Integrity Check Complete: \n", ncr_name(np));
6692
6693	printk("%s: %s %s SCSI", ncr_name(np),
6694	current_offset?"SYNC":"ASYNC",
6695	tp->ic_max_width?"WIDE":"NARROW");
6696	if (current_offset) {
6697	u_longunsigned long mbs = 10000 * (tp->ic_max_width + 1);
6698
6699	printk(" %d.%d MB/s",
6700	(int) (mbs / current_period), (int) (mbs % current_period));
6701
6702	printk(" (%d ns, %d offset)\n",
6703	(int) current_period/10, current_offset);
6704	}
6705	else
6706	printk(" %d MB/s. \n ", (tp->ic_max_width+1)*5);
6707	}
6708	#else
6709	if ((!tp->widedone \|\| !tp->period) && !tp->nego_cp && lp) {
6710	msglen += ncr_prepare_nego (np, cp, msgptr + msglen);
6711	}
6712	#endif /* SCSI_NCR_INTEGRITY_CHECKING */
6713
6714
6715	/*----------------------------------------------------
6716	**
6717	** Determine xfer direction.
6718	**
6719	**----------------------------------------------------
6720	*/
6721	if (!cp->data_len)
6722	direction = SCSI_DATA_NONE3;
6723
6724	/*
6725	** If data direction is UNKNOWN, speculate DATA_READ
6726	** but prepare alternate pointers for WRITE in case
6727	** of our speculation will be just wrong.
6728	** SCRIPTS will swap values if needed.
6729	*/
6730	switch(direction) {
6731	case SCSI_DATA_UNKNOWN0:
6732	case SCSI_DATA_WRITE1:
6733	goalp = NCB_SCRIPT_PHYS (np, data_out2)(np->p_script + ((size_t) (&((struct script *)0)->data_out2 ))) + 8;
6734	lastp = goalp - 8 - (cp->segments * (SCR_SG_SIZE(2)*4));
6735	if (direction != SCSI_DATA_UNKNOWN0)
6736	break;
6737	cp->phys.header.wgoalp = cpu_to_scr(goalp)(goalp);
6738	cp->phys.header.wlastp = cpu_to_scr(lastp)(lastp);
6739	/* fall through */
6740	case SCSI_DATA_READ2:
6741	cp->host_flagsphys.header.status[3] \|= HF_DATA_IN(1u<<5);
6742	goalp = NCB_SCRIPT_PHYS (np, data_in2)(np->p_script + ((size_t) (&((struct script *)0)->data_in2 ))) + 8;
6743	lastp = goalp - 8 - (cp->segments * (SCR_SG_SIZE(2)*4));
6744	break;
6745	default:
6746	case SCSI_DATA_NONE3:
6747	lastp = goalp = NCB_SCRIPTH_PHYS (np, no_data)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> no_data)));
6748	break;
6749	}
6750
6751	/*
6752	** Set all pointers values needed by SCRIPTS.
6753	** If direction is unknown, start at data_io.
6754	*/
6755	cp->phys.header.lastp = cpu_to_scr(lastp)(lastp);
6756	cp->phys.header.goalp = cpu_to_scr(goalp)(goalp);
6757
6758	if (direction == SCSI_DATA_UNKNOWN0)
6759	cp->phys.header.savep =
6760	cpu_to_scr(NCB_SCRIPTH_PHYS (np, data_io))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> data_io))));
6761	else
6762	cp->phys.header.savep= cpu_to_scr(lastp)(lastp);
6763
6764	/*
6765	** Save the initial data pointer in order to be able
6766	** to redo the command.
6767	** We also have to save the initial lastp, since it
6768	** will be changed to DATA_IO if we don't know the data
6769	** direction and the device completes the command with
6770	** QUEUE FULL status (without entering the data phase).
6771	*/
6772	cp->startp = cp->phys.header.savep;
6773	cp->lastp0 = cp->phys.header.lastp;
6774
6775	/*----------------------------------------------------
6776	**
6777	** fill in ccb
6778	**
6779	**----------------------------------------------------
6780	**
6781	**
6782	** physical -> virtual backlink
6783	** Generic SCSI command
6784	*/
6785
6786	/*
6787	** Startqueue
6788	*/
6789	cp->phys.header.go.start = cpu_to_scr(NCB_SCRIPT_PHYS (np,select))((np->p_script + ((size_t) (&((struct script *)0)-> select))));
6790	cp->phys.header.go.restart = cpu_to_scr(NCB_SCRIPT_PHYS (np,resel_dsa))((np->p_script + ((size_t) (&((struct script *)0)-> resel_dsa))));
6791	/*
6792	** select
6793	*/
6794	cp->phys.select.sel_id = cp->target;
6795	cp->phys.select.sel_scntl3 = tp->wval;
6796	cp->phys.select.sel_sxfer = tp->sval;
6797	cp->phys.select.sel_scntl4 = tp->uval;
6798	/*
6799	** message
6800	*/
6801	cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg))((cp->p_ccb + ((size_t) (&((struct ccb *)0)->scsi_smsg ))));
6802	cp->phys.smsg.size = cpu_to_scr(msglen)(msglen);
6803
6804	/*
6805	** command
6806	*/
6807	memcpy(cp->cdb_buf, cmd->cmnd, MIN(cmd->cmd_len, sizeof(cp->cdb_buf)))(__builtin_constant_p((((cmd->cmd_len) < (sizeof(cp-> cdb_buf))) ? (cmd->cmd_len) : (sizeof(cp->cdb_buf)))) ? __constant_memcpy((cp->cdb_buf),(cmd->cmnd),((((cmd-> cmd_len) < (sizeof(cp->cdb_buf))) ? (cmd->cmd_len) : (sizeof(cp->cdb_buf))))) : __memcpy((cp->cdb_buf),(cmd ->cmnd),((((cmd->cmd_len) < (sizeof(cp->cdb_buf)) ) ? (cmd->cmd_len) : (sizeof(cp->cdb_buf))))));
6808	cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, cdb_buf[0]))((cp->p_ccb + ((size_t) (&((struct ccb *)0)->cdb_buf [0]))));
6809	cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len)(cmd->cmd_len);
6810
6811	/*
6812	** status
6813	*/
6814	cp->actualquirksphys.header.status[0] = tp->quirks;
6815	cp->host_statusphys.header.status[1] = cp->nego_status ? HS_NEGOTIATE(2) : HS_BUSY(1);
6816	cp->scsi_statusphys.header.status[2] = S_ILLEGAL(0xff);
6817	cp->xerr_status = 0;
6818	cp->extra_bytes = 0;
6819
6820	/*
6821	** extreme data pointer.
6822	** shall be positive, so -1 is lower than lowest.:)
6823	*/
6824	cp->ext_sg = -1;
6825	cp->ext_ofs = 0;
6826
6827	/*----------------------------------------------------
6828	**
6829	** Critical region: start this job.
6830	**
6831	**----------------------------------------------------
6832	*/
6833
6834	/*
6835	** activate this job.
6836	*/
6837
6838	/*
6839	** insert next CCBs into start queue.
6840	** 2 max at a time is enough to flush the CCB wait queue.
6841	*/
6842	if (lp)
6843	ncr_start_next_ccb(np, lp, 2);
6844	else
6845	ncr_put_start_queue(np, cp);
6846
6847	/*
6848	** Command is successfully queued.
6849	*/
6850
6851	return(DID_OK0x00);
6852	}
6853
6854
6855	/*==========================================================
6856	**
6857	**
6858	** Insert a CCB into the start queue and wake up the
6859	** SCRIPTS processor.
6860	**
6861	**
6862	**==========================================================
6863	*/
6864
6865	static void ncr_start_next_ccb(ncb_p np, lcb_p lp, int maxn)
6866	{
6867	XPT_QUEHEAD *qp;
6868	ccb_p cp;
6869
6870	while (maxn-- && lp->queuedccbs < lp->queuedepth) {
6871	qp = xpt_remque_head(&lp->wait_ccbq);
6872	if (!qp)
6873	break;
6874	++lp->queuedccbs;
6875	cp = xpt_que_entry(qp, struct ccb, link_ccbq)((struct ccb )((char )(qp)-(unsigned long)(&((struct ccb *)0)->link_ccbq)));
6876	xpt_insque_tail(qp, &lp->busy_ccbq)__xpt_que_add(qp, (&lp->busy_ccbq)->blink, &lp-> busy_ccbq);
6877	lp->tasktbl[cp->tag == NO_TAG(256) ? 0 : cp->tag] =
6878	cpu_to_scr(cp->p_ccb)(cp->p_ccb);
6879	ncr_put_start_queue(np, cp);
6880	}
6881	}
6882
6883	static void ncr_put_start_queue(ncb_p np, ccb_p cp)
6884	{
6885	u_shortunsigned short qidx;
6886
6887	#ifdef SCSI_NCR_IARB_SUPPORT
6888	/*
6889	** If the previously queued CCB is not yet done,
6890	** set the IARB hint. The SCRIPTS will go with IARB
6891	** for this job when starting the previous one.
6892	** We leave devices a chance to win arbitration by
6893	** not using more than 'iarb_max' consecutive
6894	** immediate arbitrations.
6895	*/
6896	if (np->last_cp && np->iarb_count < np->iarb_max) {
6897	np->last_cp->host_flagsphys.header.status[3] \|= HF_HINT_IARB;
6898	++np->iarb_count;
6899	}
6900	else
6901	np->iarb_count = 0;
6902	np->last_cp = cp;
6903	#endif
6904
6905	/*
6906	** insert into start queue.
6907	*/
6908	qidx = np->squeueput + 2;
6909	if (qidx >= MAX_START((8(8) + 2(16)) + 4)*2) qidx = 0;
6910
6911	np->squeue [qidx] = cpu_to_scr(np->p_idletask)(np->p_idletask);
6912	MEMORY_BARRIER()do { ; } while(0);
6913	np->squeue [np->squeueput] = cpu_to_scr(cp->p_ccb)(cp->p_ccb);
6914
6915	np->squeueput = qidx;
6916	cp->queued = 1;
6917
6918	if (DEBUG_FLAGSncr_debug & DEBUG_QUEUE(0x0008))
6919	printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput);
6920
6921	/*
6922	** Script processor may be waiting for reselect.
6923	** Wake it up.
6924	*/
6925	MEMORY_BARRIER()do { ; } while(0);
6926	OUTB (nc_istat, SIGP\|np->istat_sem)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20\|np-> istat_sem))));
6927	}
6928
6929
6930	/*==========================================================
6931	**
6932	** Soft reset the chip.
6933	**
6934	** Some 896 and 876 chip revisions may hang-up if we set
6935	** the SRST (soft reset) bit at the wrong time when SCRIPTS
6936	** are running.
6937	** So, we need to abort the current operation prior to
6938	** soft resetting the chip.
6939	**
6940	**==========================================================
6941	*/
6942
6943	static void ncr_chip_reset (ncb_p np)
6944	{
6945	OUTB (nc_istat, SRST)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x40))));
6946	UDELAY (10);
6947	OUTB (nc_istat, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0))));
6948	}
6949
6950	static void ncr_soft_reset(ncb_p np)
6951	{
6952	u_charunsigned char istat;
6953	int i;
6954
6955	OUTB (nc_istat, CABRT)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x80))));
6956	for (i = 1000000 ; i ; --i) {
6957	istat = INB (nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat)))));
6958	if (istat & SIP0x02) {
6959	INW (nc_sist)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sist)))));
6960	continue;
6961	}
6962	if (istat & DIP0x01) {
6963	OUTB (nc_istat, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0))));
6964	INB (nc_dstat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dstat)))));
6965	break;
6966	}
6967	}
6968	if (!i)
6969	printk("%s: unable to abort current chip operation.\n",
6970	ncr_name(np));
6971	ncr_chip_reset(np);
6972	}
6973
6974	/*==========================================================
6975	**
6976	**
6977	** Start reset process.
6978	** The interrupt handler will reinitialize the chip.
6979	** The timeout handler will wait for settle_time before
6980	** clearing it and so resuming command processing.
6981	**
6982	**
6983	**==========================================================
6984	*/
6985	static void ncr_start_reset(ncb_p np)
6986	{
6987	(void) ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay);
6988	}
6989
6990	static int ncr_reset_scsi_bus(ncb_p np, int enab_int, int settle_delay)
6991	{
6992	u_int32 term;
6993	int retv = 0;
6994
6995	np->settle_time = ktime_get(settle_delay * HZ)(jiffies + (unsigned long) settle_delay * 100);
6996
6997	if (bootverbose(np->verbose) > 1)
6998	printk("%s: resetting, "
6999	"command processing suspended for %d seconds\n",
7000	ncr_name(np), settle_delay);
7001
7002	ncr_soft_reset(np); /* Soft reset the chip */
7003	UDELAY (2000); /* The 895/6 need time for the bus mode to settle */
7004	if (enab_int)
7005	OUTW (nc_sien, RST)(((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sien))))) = (((0x02))));
7006	/*
7007	** Enable Tolerant, reset IRQD if present and
7008	** properly set IRQ mode, prior to resetting the bus.
7009	*/
7010	OUTB (nc_stest3, TE)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80))) );
7011	OUTB (nc_dcntl, (np->rv_dcntl & IRQM))(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dcntl))))) = ((((np-> rv_dcntl & 0x08)))));
7012	OUTB (nc_scntl1, CRST)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl1))))) = (((0x08))) );
7013	UDELAY (200);
7014
7015	if (!driver_setup.bus_check)
7016	goto out;
7017	/*
7018	** Check for no terminators or SCSI bus shorts to ground.
7019	** Read SCSI data bus, data parity bits and control signals.
7020	** We are expecting RESET to be TRUE and other signals to be
7021	** FALSE.
7022	*/
7023	term = INB(nc_sstat0)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sstat0)))));
7024	term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */
7025	term \|= ((INB(nc_sstat2)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sstat2))))) & 0x01) << 26) \| /* sdp1 */
7026	((INW(nc_sbdl)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sbdl))))) & 0xff) << 9) \| /* d7-0 */
7027	((INW(nc_sbdl)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sbdl))))) & 0xff00) << 10) \| /* d15-8 */
7028	INB(nc_sbcl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbcl))))); /* req ack bsy sel atn msg cd io */
7029
7030	if (!(np->features & FE_WIDE(1<<1)))
7031	term &= 0x3ffff;
7032
7033	if (term != (2<<7)) {
7034	printk("%s: suspicious SCSI data while resetting the BUS.\n",
7035	ncr_name(np));
7036	printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
7037	"0x%lx, expecting 0x%lx\n",
7038	ncr_name(np),
7039	(np->features & FE_WIDE(1<<1)) ? "dp1,d15-8," : "",
7040	(u_longunsigned long)term, (u_longunsigned long)(2<<7));
7041	if (driver_setup.bus_check == 1)
7042	retv = 1;
7043	}
7044	out:
7045	OUTB (nc_scntl1, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl1))))) = (((0))));
7046	return retv;
7047	}
7048
7049	/*==========================================================
7050	**
7051	**
7052	** Reset the SCSI BUS.
7053	** This is called from the generic SCSI driver.
7054	**
7055	**
7056	**==========================================================
7057	*/
7058	static int ncr_reset_bus (ncb_p np, Scsi_Cmnd *cmd, int sync_reset)
7059	{
7060	/* Scsi_Device device = cmd->device; /
7061	ccb_p cp;
7062	int found;
7063
7064	/*
7065	* Return immediately if reset is in progress.
7066	*/
7067	if (np->settle_time) {
7068	return SCSI_RESET_PUNT1;
7069	}
7070	/*
7071	* Start the reset process.
7072	* The script processor is then assumed to be stopped.
7073	* Commands will now be queued in the waiting list until a settle
7074	* delay of 2 seconds will be completed.
7075	*/
7076	ncr_start_reset(np);
7077	/*
7078	* First, look in the wakeup list
7079	*/
7080	for (found=0, cp=np->ccbc; cp; cp=cp->link_ccb) {
7081	/*
7082	** look for the ccb of this command.
7083	*/
7084	if (cp->host_statusphys.header.status[1] == HS_IDLE(0)) continue;
7085	if (cp->cmd == cmd) {
7086	found = 1;
7087	break;
7088	}
7089	}
7090	/*
7091	* Then, look in the waiting list
7092	*/
7093	if (!found && retrieve_from_waiting_list(0, np, cmd))
7094	found = 1;
7095	/*
7096	* Wake-up all awaiting commands with DID_RESET.
7097	*/
7098	reset_waiting_list(np)process_waiting_list((np), 0x08);
7099	/*
7100	* Wake-up all pending commands with HS_RESET -> DID_RESET.
7101	*/
7102	ncr_wakeup(np, HS_RESET(6\|(0x80)));
7103	/*
7104	* If the involved command was not in a driver queue, and the
7105	* scsi driver told us reset is synchronous, and the command is not
7106	* currently in the waiting list, complete it with DID_RESET status,
7107	* in order to keep it alive.
7108	*/
7109	if (!found && sync_reset && !retrieve_from_waiting_list(0, np, cmd)) {
7110	SetScsiResult(cmd, DID_RESET, 0)cmd->result = (((0x08) << 16) + ((0) & 0x7f));
7111	ncr_queue_done_cmd(np, cmd);
7112	}
7113
7114	return SCSI_RESET_SUCCESS2;
7115	}
7116
7117	/*==========================================================
7118	**
7119	**
7120	** Abort an SCSI command.
7121	** This is called from the generic SCSI driver.
7122	**
7123	**
7124	**==========================================================
7125	*/
7126	static int ncr_abort_command (ncb_p np, Scsi_Cmnd *cmd)
7127	{
7128	/* Scsi_Device device = cmd->device; /
7129	ccb_p cp;
7130
7131	/*
7132	* First, look for the scsi command in the waiting list
7133	*/
7134	if (remove_from_waiting_list(np, cmd)retrieve_from_waiting_list(1, (np), (cmd))) {
7135	SetScsiAbortResult(cmd)cmd->result = (((0x05) << 16) + ((0xff) & 0x7f));
7136	ncr_queue_done_cmd(np, cmd);
7137	return SCSI_ABORT_SUCCESS1;
7138	}
7139
7140	/*
7141	* Then, look in the wakeup list
7142	*/
7143	for (cp=np->ccbc; cp; cp=cp->link_ccb) {
7144	/*
7145	** look for the ccb of this command.
7146	*/
7147	if (cp->host_statusphys.header.status[1] == HS_IDLE(0)) continue;
7148	if (cp->cmd == cmd)
7149	break;
7150	}
7151
7152	if (!cp) {
7153	return SCSI_ABORT_NOT_RUNNING4;
7154	}
7155
7156	/*
7157	** Keep track we have to abort this job.
7158	*/
7159	cp->to_abort = 1;
7160
7161	/*
7162	** Tell the SCRIPTS processor to stop
7163	** and synchronize with us.
7164	*/
7165	np->istat_sem = SEM0x10;
7166
7167	/*
7168	** If there are no requests, the script
7169	** processor will sleep on SEL_WAIT_RESEL.
7170	** Let's wake it up, since it may have to work.
7171	*/
7172	OUTB (nc_istat, SIGP\|SEM)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20\|0x10 ))));
7173
7174	/*
7175	** Tell user we are working for him.
7176	*/
7177	return SCSI_ABORT_PENDING2;
7178	}
7179
7180	/*==========================================================
7181	**
7182	** Linux release module stuff.
7183	**
7184	** Called before unloading the module
7185	** Detach the host.
7186	** We have to free resources and halt the NCR chip
7187	**
7188	**==========================================================
7189	*/
7190
7191	#ifdef MODULE
7192	static int ncr_detach(ncb_p np)
7193	{
7194	int i;
7195
7196	printk("%s: detaching ...\n", ncr_name(np));
7197
7198	/*
7199	** Stop the ncr_timeout process
7200	** Set release_stage to 1 and wait that ncr_timeout() set it to 2.
7201	*/
7202	np->release_stage = 1;
7203	for (i = 50 ; i && np->release_stage != 2 ; i--) MDELAY (100);
7204	if (np->release_stage != 2)
7205	printk("%s: the timer seems to be already stopped\n",
7206	ncr_name(np));
7207	else np->release_stage = 2;
7208
7209	/*
7210	** Reset NCR chip.
7211	** We should use ncr_soft_reset(), but we donnot want to do
7212	** so, since we may not be safe if interrupts occur.
7213	*/
7214
7215	printk("%s: resetting chip\n", ncr_name(np));
7216	ncr_chip_reset(np);
7217
7218	/*
7219	** Restore bios setting for automatic clock detection.
7220	*/
7221	OUTB(nc_dmode, np->sv_dmode)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dmode))))) = (((np->sv_dmode ))));
7222	OUTB(nc_dcntl, np->sv_dcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dcntl))))) = (((np->sv_dcntl ))));
7223	OUTB(nc_ctest3, np->sv_ctest3)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((np-> sv_ctest3))));
7224	OUTB(nc_ctest4, np->sv_ctest4)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest4))))) = (((np-> sv_ctest4))));
7225	OUTB(nc_ctest5, np->sv_ctest5)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest5))))) = (((np-> sv_ctest5))));
7226	OUTB(nc_gpcntl, np->sv_gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((np-> sv_gpcntl))));
7227	OUTB(nc_stest2, np->sv_stest2)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest2))))) = (((np-> sv_stest2))));
7228
7229	ncr_selectclock(np, np->sv_scntl3);
7230	/*
7231	** Free host resources
7232	*/
7233	ncr_free_resources(np);
7234
7235	return 1;
7236	}
7237	#endif
7238
7239	/*==========================================================
7240	**
7241	**
7242	** Complete execution of a SCSI command.
7243	** Signal completion to the generic SCSI driver.
7244	**
7245	**
7246	**==========================================================
7247	*/
7248
7249	void ncr_complete (ncb_p np, ccb_p cp)
7250	{
7251	Scsi_Cmnd *cmd;
7252	tcb_p tp;
7253	lcb_p lp;
7254
7255	/*
7256	** Sanity check
7257	*/
7258	if (!cp \|\| !cp->cmd)
7259	return;
7260
7261	/*
7262	** Print some debugging info.
7263	*/
7264
7265	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080))
7266	printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp,
7267	cp->host_statusphys.header.status[1],cp->scsi_statusphys.header.status[2]);
7268
7269	/*
7270	** Get command, target and lun pointers.
7271	*/
7272
7273	cmd = cp->cmd;
7274	cp->cmd = NULL((void *) 0);
7275	tp = &np->target[cp->target];
7276	lp = ncr_lp(np, tp, cp->lun)(!cp->lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(cp ->lun)] : 0;
7277
7278	/*
7279	** We donnot queue more than 1 ccb per target
7280	** with negotiation at any time. If this ccb was
7281	** used for negotiation, clear this info in the tcb.
7282	*/
7283
7284	if (cp == tp->nego_cp)
7285	tp->nego_cp = 0;
7286
7287	#ifdef SCSI_NCR_IARB_SUPPORT
7288	/*
7289	** We just complete the last queued CCB.
7290	** Clear this info that is no more relevant.
7291	*/
7292	if (cp == np->last_cp)
7293	np->last_cp = 0;
7294	#endif
7295
7296	/*
7297	** If auto-sense performed, change scsi status,
7298	** Otherwise, compute the residual.
7299	*/
7300	if (cp->host_flagsphys.header.status[3] & HF_AUTO_SENSE(1u<<4)) {
7301	cp->scsi_statusphys.header.status[2] = cp->sv_scsi_status;
7302	cp->xerr_status = cp->sv_xerr_status;
7303	}
7304	else {
7305	cp->resid = 0;
7306	if (cp->xerr_status \|\|
7307	cp->phys.header.lastp != cp->phys.header.goalp)
7308	cp->resid = ncr_compute_residual(np, cp);
7309	}
7310
7311	/*
7312	** Check for extended errors.
7313	*/
7314
7315	if (cp->xerr_status) {
7316	if (cp->xerr_status & XE_PARITY_ERR(4)) {
7317	PRINT_ADDR(cmd);
7318	printk ("unrecovered SCSI parity error.\n");
7319	}
7320	if (cp->xerr_status & XE_EXTRA_DATA(1)) {
7321	PRINT_ADDR(cmd);
7322	printk ("extraneous data discarded.\n");
7323	}
7324	if (cp->xerr_status & XE_BAD_PHASE(2)) {
7325	PRINT_ADDR(cmd);
7326	printk ("illegal scsi phase (4/5).\n");
7327	}
7328	if (cp->xerr_status & XE_SODL_UNRUN(1<<3)) {
7329	PRINT_ADDR(cmd);
7330	printk ("ODD transfer in DATA OUT phase.\n");
7331	}
7332	if (cp->xerr_status & XE_SWIDE_OVRUN(1<<4)){
7333	PRINT_ADDR(cmd);
7334	printk ("ODD transfer in DATA IN phase.\n");
7335	}
7336
7337	if (cp->host_statusphys.header.status[1]==HS_COMPLETE(4\|(0x80)))
7338	cp->host_statusphys.header.status[1] = HS_FAIL(9\|(0x80));
7339	}
7340
7341	/*
7342	** Print out any error for debugging purpose.
7343	*/
7344	if (DEBUG_FLAGSncr_debug & (DEBUG_RESULT(0x0010)\|DEBUG_TINY(0x0080))) {
7345	if (cp->host_statusphys.header.status[1]!=HS_COMPLETE(4\|(0x80)) \|\| cp->scsi_statusphys.header.status[2]!=S_GOOD(0x00) \|\|
7346	cp->resid) {
7347	PRINT_ADDR(cmd);
7348	printk ("ERROR: cmd=%x host_status=%x scsi_status=%x "
7349	"data_len=%d residual=%d\n",
7350	cmd->cmnd[0], cp->host_statusphys.header.status[1], cp->scsi_statusphys.header.status[2],
7351	cp->data_len, cp->resid);
7352	}
7353	}
7354
7355	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,3,99)(((2)<<16)+((3)<<8)+(99))
7356	/*
7357	** Move residual byte count to user structure.
7358	*/
7359	cmd->resid = cp->resid;
7360	#endif
7361	/*
7362	** Check the status.
7363	*/
7364	if ( (cp->host_statusphys.header.status[1] == HS_COMPLETE(4\|(0x80)))
7365	&& (cp->scsi_statusphys.header.status[2] == S_GOOD(0x00) \|\|
7366	cp->scsi_statusphys.header.status[2] == S_COND_MET(0x04))) {
7367	/*
7368	** All went well (GOOD status).
7369	** CONDITION MET status is returned on
7370	** `Pre-Fetch' or `Search data' success.
7371	*/
7372	SetScsiResult(cmd, DID_OK, cp->scsi_status)cmd->result = (((0x00) << 16) + ((cp->phys.header .status[2]) & 0x7f));
7373
7374	/*
7375	** Allocate the lcb if not yet.
7376	*/
7377	if (!lp)
7378	ncr_alloc_lcb (np, cp->target, cp->lun);
7379
7380	/*
7381	** On standard INQUIRY response (EVPD and CmDt
7382	** not set), setup logical unit according to
7383	** announced capabilities (we need the 1rst 7 bytes).
7384	*/
7385	if (cmd->cmnd[0] == 0x12 && !(cmd->cmnd[1] & 0x3) &&
7386	cmd->cmnd[4] >= 7 && !cmd->use_sg) {
7387	sync_scsi_data(np, cmd)do {; } while (0); /* SYNC the data */
7388	ncr_setup_lcb (np, cp->target, cp->lun,
7389	(char *) cmd->request_buffer);
7390	}
7391
7392	/*
7393	** If tags was reduced due to queue full,
7394	** increase tags if 1000 good status received.
7395	*/
7396	if (lp && lp->usetags && lp->numtags < lp->maxtags) {
7397	++lp->num_good;
7398	if (lp->num_good >= 1000) {
7399	lp->num_good = 0;
7400	++lp->numtags;
7401	ncr_setup_tags (np, cp->target, cp->lun);
7402	}
7403	}
7404	} else if ((cp->host_statusphys.header.status[1] == HS_COMPLETE(4\|(0x80)))
7405	&& (cp->scsi_statusphys.header.status[2] == S_CHECK_COND(0x02))) {
7406	/*
7407	** Check condition code
7408	*/
7409	SetScsiResult(cmd, DID_OK, S_CHECK_COND)cmd->result = (((0x00) << 16) + (((0x02)) & 0x7f ));
7410
7411	if (DEBUG_FLAGSncr_debug & (DEBUG_RESULT(0x0010)\|DEBUG_TINY(0x0080))) {
7412	PRINT_ADDR(cmd);
7413	ncr_printl_hex("sense data:", cmd->sense_buffer, 14);
7414	}
7415	} else if ((cp->host_statusphys.header.status[1] == HS_COMPLETE(4\|(0x80)))
7416	&& (cp->scsi_statusphys.header.status[2] == S_CONFLICT(0x18))) {
7417	/*
7418	** Reservation Conflict condition code
7419	*/
7420	SetScsiResult(cmd, DID_OK, S_CONFLICT)cmd->result = (((0x00) << 16) + (((0x18)) & 0x7f ));
7421
7422	} else if ((cp->host_statusphys.header.status[1] == HS_COMPLETE(4\|(0x80)))
7423	&& (cp->scsi_statusphys.header.status[2] == S_BUSY(0x08) \|\|
7424	cp->scsi_statusphys.header.status[2] == S_QUEUE_FULL(0x28))) {
7425
7426	/*
7427	** Target is busy.
7428	*/
7429	SetScsiResult(cmd, DID_OK, cp->scsi_status)cmd->result = (((0x00) << 16) + ((cp->phys.header .status[2]) & 0x7f));
7430
7431	} else if ((cp->host_statusphys.header.status[1] == HS_SEL_TIMEOUT(5\|(0x80)))
7432	\|\| (cp->host_statusphys.header.status[1] == HS_TIMEOUT(8\|(0x80)))) {
7433
7434	/*
7435	** No response
7436	*/
7437	SetScsiResult(cmd, DID_TIME_OUT, cp->scsi_status)cmd->result = (((0x03) << 16) + ((cp->phys.header .status[2]) & 0x7f));
7438
7439	} else if (cp->host_statusphys.header.status[1] == HS_RESET(6\|(0x80))) {
7440
7441	/*
7442	** SCSI bus reset
7443	*/
7444	SetScsiResult(cmd, DID_RESET, cp->scsi_status)cmd->result = (((0x08) << 16) + ((cp->phys.header .status[2]) & 0x7f));
7445
7446	} else if (cp->host_statusphys.header.status[1] == HS_ABORTED(7\|(0x80))) {
7447
7448	/*
7449	** Transfer aborted
7450	*/
7451	SetScsiAbortResult(cmd)cmd->result = (((0x05) << 16) + ((0xff) & 0x7f));
7452
7453	} else {
7454	int did_status;
7455
7456	/*
7457	** Other protocol messes
7458	*/
7459	PRINT_ADDR(cmd);
7460	printk ("COMMAND FAILED (%x %x) @%p.\n",
7461	cp->host_statusphys.header.status[1], cp->scsi_statusphys.header.status[2], cp);
7462
7463	did_status = DID_ERROR0x07;
7464	if (cp->xerr_status & XE_PARITY_ERR(4))
7465	did_status = DID_PARITY0x06;
7466
7467	SetScsiResult(cmd, did_status, cp->scsi_status)cmd->result = (((did_status) << 16) + ((cp->phys. header.status[2]) & 0x7f));
7468	}
7469
7470	/*
7471	** trace output
7472	*/
7473
7474	if (tp->usrflag & UF_TRACE(0x01)) {
7475	PRINT_ADDR(cmd);
7476	printk (" CMD:");
7477	ncr_print_hex(cmd->cmnd, cmd->cmd_len);
7478
7479	if (cp->host_statusphys.header.status[1]==HS_COMPLETE(4\|(0x80))) {
7480	switch (cp->scsi_statusphys.header.status[2]) {
7481	case S_GOOD(0x00):
7482	printk (" GOOD");
7483	break;
7484	case S_CHECK_COND(0x02):
7485	printk (" SENSE:");
7486	ncr_print_hex(cmd->sense_buffer, 14);
7487	break;
7488	default:
7489	printk (" STAT: %x\n", cp->scsi_statusphys.header.status[2]);
7490	break;
7491	}
7492	} else printk (" HOSTERROR: %x", cp->host_statusphys.header.status[1]);
7493	printk ("\n");
7494	}
7495
7496	/*
7497	** Free this ccb
7498	*/
7499	ncr_free_ccb (np, cp);
7500
7501	/*
7502	** requeue awaiting scsi commands for this lun.
7503	*/
7504	if (lp && lp->queuedccbs < lp->queuedepth &&
7505	!xpt_que_empty(&lp->wait_ccbq))
7506	ncr_start_next_ccb(np, lp, 2);
7507
7508	/*
7509	** requeue awaiting scsi commands for this controller.
7510	*/
7511	if (np->waiting_list)
7512	requeue_waiting_list(np)process_waiting_list((np), 0x00);
7513
7514	/*
7515	** signal completion to generic driver.
7516	*/
7517	ncr_queue_done_cmd(np, cmd);
7518	}
7519
7520	/*==========================================================
7521	**
7522	**
7523	** Signal all (or one) control block done.
7524	**
7525	**
7526	**==========================================================
7527	*/
7528
7529	/*
7530	** The NCR has completed CCBs.
7531	** Look at the DONE QUEUE.
7532	**
7533	** On architectures that may reorder LOAD/STORE operations,
7534	** a memory barrier may be needed after the reading of the
7535	** so-called `flag' and prior to dealing with the data.
7536	*/
7537	int ncr_wakeup_done (ncb_p np)
7538	{
7539	ccb_p cp;
7540	int i, n;
7541	u_longunsigned long dsa;
7542
7543	n = 0;
7544	i = np->dqueueget;
7545	while (1) {
7546	dsa = scr_to_cpu(np->dqueue[i])(np->dqueue[i]);
7547	if (!dsa)
7548	break;
7549	np->dqueue[i] = 0;
7550	if ((i = i+2) >= MAX_START((8(8) + 2(16)) + 4)*2)
7551	i = 0;
7552
7553	cp = ncr_ccb_from_dsa(np, dsa);
7554	if (cp) {
7555	MEMORY_BARRIER()do { ; } while(0);
7556	ncr_complete (np, cp);
7557	++n;
7558	}
7559	else
7560	printk (KERN_ERR"<3>" "%s: bad DSA (%lx) in done queue.\n",
7561	ncr_name(np), dsa);
7562	}
7563	np->dqueueget = i;
7564
7565	return n;
7566	}
7567
7568	/*
7569	** Complete all active CCBs.
7570	*/
7571	void ncr_wakeup (ncb_p np, u_longunsigned long code)
7572	{
7573	ccb_p cp = np->ccbc;
7574
7575	while (cp) {
7576	if (cp->host_statusphys.header.status[1] != HS_IDLE(0)) {
7577	cp->host_statusphys.header.status[1] = code;
7578	ncr_complete (np, cp);
7579	}
7580	cp = cp->link_ccb;
7581	}
7582	}
7583
7584	/*==========================================================
7585	**
7586	**
7587	** Start NCR chip.
7588	**
7589	**
7590	**==========================================================
7591	*/
7592
7593	void ncr_init (ncb_p np, int reset, char * msg, u_longunsigned long code)
7594	{
7595	int i;
7596	u_longunsigned long phys;
7597
7598	/*
7599	** Reset chip if asked, otherwise just clear fifos.
7600	*/
7601
7602	if (reset)
7603	ncr_soft_reset(np);
7604	else {
7605	OUTB (nc_stest3, TE\|CSF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80\|0x02 ))));
7606	OUTONB (nc_ctest3, CLF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest3))))) \| (0x04)))));
7607	}
7608
7609	/*
7610	** Message.
7611	*/
7612
7613	if (msg) printk (KERN_INFO"<6>" "%s: restart (%s).\n", ncr_name (np), msg);
7614
7615	/*
7616	** Clear Start Queue
7617	*/
7618	phys = np->p_squeue;
7619	np->queuedepth = MAX_START((8(8) + 2(16)) + 4) - 1; /* 1 entry needed as end marker */
7620	for (i = 0; i < MAX_START((8(8) + 2(16)) + 4)*2; i += 2) {
7621	np->squeue[i] = cpu_to_scr(np->p_idletask)(np->p_idletask);
7622	np->squeue[i+1] = cpu_to_scr(phys + (i+2)4)(phys + (i+2)4);
7623	}
7624	np->squeue[MAX_START((8(8) + 2(16)) + 4)*2-1] = cpu_to_scr(phys)(phys);
7625
7626
7627	/*
7628	** Start at first entry.
7629	*/
7630	np->squeueput = 0;
7631	np->scripth0->startpos[0] = cpu_to_scr(phys)(phys);
7632
7633	/*
7634	** Clear Done Queue
7635	*/
7636	phys = vtobus(np->dqueue)virt_to_phys(np->dqueue);
7637	for (i = 0; i < MAX_START((8(8) + 2(16)) + 4)*2; i += 2) {
7638	np->dqueue[i] = 0;
7639	np->dqueue[i+1] = cpu_to_scr(phys + (i+2)4)(phys + (i+2)4);
7640	}
7641	np->dqueue[MAX_START((8(8) + 2(16)) + 4)*2-1] = cpu_to_scr(phys)(phys);
7642
7643	/*
7644	** Start at first entry.
7645	*/
7646	np->scripth0->done_pos[0] = cpu_to_scr(phys)(phys);
7647	np->dqueueget = 0;
7648
7649	/*
7650	** Wakeup all pending jobs.
7651	*/
7652	ncr_wakeup (np, code);
7653
7654	/*
7655	** Init chip.
7656	*/
7657
7658	OUTB (nc_istat, 0x00 )(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x00)))); /* Remove Reset, abort */
7659	UDELAY (2000); /* The 895 needs time for the bus mode to settle */
7660
7661	OUTB (nc_scntl0, np->rv_scntl0 \| 0xc0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl0))))) = (((np-> rv_scntl0 \| 0xc0))));
7662	/* full arb., ena parity, par->ATN */
7663	OUTB (nc_scntl1, 0x00)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl1))))) = (((0x00))) ); /* odd parity, and remove CRST!! */
7664
7665	ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */
7666
7667	OUTB (nc_scid , RRE\|np->myaddr)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scid))))) = (((0x40\|np-> myaddr)))); /* Adapter SCSI address */
7668	OUTW (nc_respid, 1ul<<np->myaddr)(((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_respid))))) = (((1ul<< np->myaddr)))); /* Id to respond to */
7669	OUTB (nc_istat , SIGP )(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20)))); /* Signal Process */
7670	OUTB (nc_dmode , np->rv_dmode)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dmode))))) = (((np->rv_dmode )))); /* Burst length, dma mode */
7671	OUTB (nc_ctest5, np->rv_ctest5)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest5))))) = (((np-> rv_ctest5)))); /* Large fifo + large burst */
7672
7673	OUTB (nc_dcntl , NOCOM\|np->rv_dcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dcntl))))) = (((0x01\|np-> rv_dcntl)))); /* Protect SFBR */
7674	OUTB (nc_ctest3, np->rv_ctest3)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((np-> rv_ctest3)))); /* Write and invalidate */
7675	OUTB (nc_ctest4, np->rv_ctest4)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest4))))) = (((np-> rv_ctest4)))); /* Master parity checking */
7676
7677	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
7678	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21)){
7679	OUTB (nc_stest2, EXT\|np->rv_stest2)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest2))))) = (((0x02\|np ->rv_stest2))));
7680	/* Extended Sreq/Sack filtering, not supported in C1010/C1010_66 */
7681	}
7682	OUTB (nc_stest3, TE)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80))) ); /* TolerANT enable */
7683	OUTB (nc_stime0, 0x0c)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stime0))))) = (((0x0c))) ); /* HTH disabled STO 0.25 sec */
7684
7685	/*
7686	** DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2.
7687	** Disable overlapped arbitration for all dual-function
7688	** devices, regardless revision id.
7689	** We may consider it is a post-chip-design feature. ;-)
7690	**
7691	** Errata applies to all 896 and 1010 parts.
7692	*/
7693	if (np->device_id == PCI_DEVICE_ID_NCR_53C8750x000f)
7694	OUTB (nc_ctest0, (1<<5))(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest0))))) = ((((1<< 5)))));
7695	else if (np->device_id == PCI_DEVICE_ID_NCR_53C8960x000b \|\|
7696	np->device_id == PCI_DEVICE_ID_LSI_53C10100x20 \|\|
7697	np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21 )
7698	np->rv_ccntl0 \|= DPR0x01;
7699
7700	/*
7701	** C1010_66MHz rev 0 part requies AIPCNTL1 bit 3 to be set.
7702	*/
7703	if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)
7704	OUTB(nc_aipcntl1, (1<<3))(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_aipcntl1))))) = ((((1<< 3)))));
7705
7706	/*
7707	** If 64 bit (895A/896/1010/1010_66) write the CCNTL1 register to
7708	** enable 40 bit address table indirect addressing for MOVE.
7709	** Also write CCNTL0 if 64 bit chip, since this register seems
7710	** to only be used by 64 bit cores.
7711	*/
7712	if (np->features & FE_64BIT(1<<17)) {
7713	OUTB (nc_ccntl0, np->rv_ccntl0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ccntl0))))) = (((np-> rv_ccntl0))));
7714	OUTB (nc_ccntl1, np->rv_ccntl1)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ccntl1))))) = (((np-> rv_ccntl1))));
7715	}
7716
7717	/*
7718	** If phase mismatch handled by scripts (53C895A or 53C896
7719	** or 53C1010 or 53C1010_66), set PM jump addresses.
7720	*/
7721
7722	if (np->features & FE_NOPM(1<<19)) {
7723	printk(KERN_INFO"<6>" "%s: handling phase mismatch from SCRIPTS.\n",
7724	ncr_name(np));
7725	OUTL (nc_pmjad1, NCB_SCRIPTH_PHYS (np, pm_handle))(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_pmjad1))))) = ((((np-> p_scripth + ((size_t) (&((struct scripth *)0)->pm_handle )))))));
7726	OUTL (nc_pmjad2, NCB_SCRIPTH_PHYS (np, pm_handle))(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_pmjad2))))) = ((((np-> p_scripth + ((size_t) (&((struct scripth *)0)->pm_handle )))))));
7727	}
7728
7729	/*
7730	** Enable GPIO0 pin for writing if LED support from SCRIPTS.
7731	** Also set GPIO5 and clear GPIO6 if hardware LED control.
7732	*/
7733
7734	if (np->features & FE_LED0(1<<0))
7735	OUTB(nc_gpcntl, INB(nc_gpcntl) & ~0x01)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpcntl))))) & ~0x01))));
7736	else if (np->features & FE_LEDC(1<<20))
7737	OUTB(nc_gpcntl, (INB(nc_gpcntl) & ~0x41) \| 0x20)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = ((((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpcntl))))) & ~0x41) \| 0x20))));
7738
7739
7740	/*
7741	** enable ints
7742	*/
7743
7744	OUTW (nc_sien , STO\|HTH\|MA\|SGE\|UDC\|RST\|PAR)(((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sien))))) = (((0x0400\|0x0100 \|0x80\|0x08\|0x04\|0x02\|0x01))));
7745	OUTB (nc_dien , MDPE\|BF\|SSI\|SIR\|IID)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dien))))) = (((0x40\|0x20 \|0x08\|0x04\|0x01))));
7746
7747	/*
7748	** For 895/895A/896/c1010
7749	** Enable SBMC interrupt and save current SCSI bus mode.
7750	*/
7751	if ( (np->features & FE_ULTRA2(1<<3)) \|\| (np->features & FE_ULTRA3(1<<22)) ) {
7752	OUTONW (nc_sien, SBMC)(((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sien))))) = (((((volatile unsigned short ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sien))))) \| (0x1000)))));
7753	np->scsi_mode = INB (nc_stest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest4))))) & SMODE0xc0;
7754	}
7755
7756	/*
7757	** Fill in target structure.
7758	** Reinitialize usrsync.
7759	** Reinitialize usrwide.
7760	** Prepare sync negotiation according to actual SCSI bus mode.
7761	*/
7762
7763	for (i=0;i<MAX_TARGET((16));i++) {
7764	tcb_p tp = &np->target[i];
7765
7766	tp->to_reset = 0;
7767
7768	tp->sval = 0;
7769	tp->wval = np->rv_scntl3;
7770	tp->uval = np->rv_scntl4;
7771
7772	if (tp->usrsync != 255) {
7773	if (tp->usrsync <= np->maxsync) {
7774	if (tp->usrsync < np->minsync) {
7775	tp->usrsync = np->minsync;
7776	}
7777	}
7778	else
7779	tp->usrsync = 255;
7780	};
7781
7782	if (tp->usrwide > np->maxwide)
7783	tp->usrwide = np->maxwide;
7784
7785	ncr_negotiate (np, tp);
7786	}
7787
7788	/*
7789	** Download SCSI SCRIPTS to on-chip RAM if present,
7790	** and start script processor.
7791	** We do the download preferently from the CPU.
7792	** For platforms that may not support PCI memory mapping,
7793	** we use a simple SCRIPTS that performs MEMORY MOVEs.
7794	*/
7795	if (np->base2_ba) {
7796	if (bootverbose(np->verbose))
7797	printk ("%s: Downloading SCSI SCRIPTS.\n",
7798	ncr_name(np));
7799	#ifdef SCSI_NCR_PCI_MEM_NOT_SUPPORTED
7800	if (np->base2_ws == 8192)
7801	phys = NCB_SCRIPTH0_PHYS (np, start_ram64)(np->p_scripth0+((size_t) (&((struct scripth *)0)-> start_ram64)));
7802	else
7803	phys = NCB_SCRIPTH_PHYS (np, start_ram)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> start_ram)));
7804	#else
7805	if (np->base2_ws == 8192) {
7806	memcpy_to_pci(np->base2_va + 4096,(__builtin_constant_p(((sizeof(struct scripth)))) ? __constant_memcpy (((void )((np->base2_va + 4096))),(((np->scripth0))),( ((sizeof(struct scripth))))) : __memcpy(((void )((np->base2_va + 4096))),(((np->scripth0))),(((sizeof(struct scripth)))) ))
7807	np->scripth0, sizeof(struct scripth))(__builtin_constant_p(((sizeof(struct scripth)))) ? __constant_memcpy (((void )((np->base2_va + 4096))),(((np->scripth0))),( ((sizeof(struct scripth))))) : __memcpy(((void )((np->base2_va + 4096))),(((np->scripth0))),(((sizeof(struct scripth)))) ));
7808	OUTL (nc_mmws, np->scr_ram_seg)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_mmws))))) = (((np->scr_ram_seg ))));
7809	OUTL (nc_mmrs, np->scr_ram_seg)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_mmrs))))) = (((np->scr_ram_seg ))));
7810	OUTL (nc_sfs, np->scr_ram_seg)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sfs))))) = (((np->scr_ram_seg ))));
7811	phys = NCB_SCRIPTH_PHYS (np, start64)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> start64)));
7812	}
7813	else
7814	phys = NCB_SCRIPT_PHYS (np, init)(np->p_script + ((size_t) (&((struct script *)0)->init )));
7815	memcpy_to_pci(np->base2_va, np->script0, sizeof(struct script))(__builtin_constant_p(((sizeof(struct script)))) ? __constant_memcpy (((void )((np->base2_va))),(((np->script0))),(((sizeof (struct script))))) : __memcpy(((void )((np->base2_va))), (((np->script0))),(((sizeof(struct script))))));
7816	#endif /* SCSI_NCR_PCI_MEM_NOT_SUPPORTED */
7817	}
7818	else
7819	phys = NCB_SCRIPT_PHYS (np, init)(np->p_script + ((size_t) (&((struct script *)0)->init )));
7820
7821	np->istat_sem = 0;
7822
7823	OUTL (nc_dsa, np->p_ncb)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsa))))) = (((np->p_ncb ))));
7824	OUTL_DSP (phys)do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dsp ))))) = ((((phys))))); } while (0);
7825	}
7826
7827	/*==========================================================
7828	**
7829	** Prepare the negotiation values for wide and
7830	** synchronous transfers.
7831	**
7832	**==========================================================
7833	*/
7834
7835	static void ncr_negotiate (struct ncb* np, struct tcb* tp)
7836	{
7837	/*
7838	** minsync unit is 4ns !
7839	*/
7840
7841	u_longunsigned long minsync = tp->usrsync;
7842
7843	/*
7844	** SCSI bus mode limit
7845	*/
7846
7847	if (np->scsi_mode && np->scsi_mode == SMODE_SE0x80) {
7848	if (minsync < 12) minsync = 12;
7849	}
7850
7851	/*
7852	** our limit ..
7853	*/
7854
7855	if (minsync < np->minsync)
7856	minsync = np->minsync;
7857
7858	/*
7859	** divider limit
7860	*/
7861
7862	if (minsync > np->maxsync)
7863	minsync = 255;
7864
7865	tp->minsync = minsync;
7866	tp->maxoffs = (minsync<255 ? np->maxoffs : 0);
7867
7868	/*
7869	** period=0: has to negotiate sync transfer
7870	*/
7871
7872	tp->period=0;
7873
7874	/*
7875	** widedone=0: has to negotiate wide transfer
7876	*/
7877	tp->widedone=0;
7878	}
7879
7880	/*==========================================================
7881	**
7882	** Get clock factor and sync divisor for a given
7883	** synchronous factor period.
7884	** Returns the clock factor (in sxfer) and scntl3
7885	** synchronous divisor field.
7886	**
7887	**==========================================================
7888	*/
7889
7890	static void ncr_getsync(ncb_p np, u_charunsigned char sfac, u_charunsigned char fakp, u_charunsigned char scntl3p)
7891	{
7892	u_longunsigned long clk = np->clock_khz; /* SCSI clock frequency in kHz */
7893	int div = np->clock_divn; /* Number of divisors supported */
7894	u_longunsigned long fak; /* Sync factor in sxfer */
7895	u_longunsigned long per; /* Period in tenths of ns */
7896	u_longunsigned long kpc; /* (per * clk) */
7897
7898	/*
7899	** Compute the synchronous period in tenths of nano-seconds
7900	** from sfac.
7901	**
7902	** Note, if sfac == 9, DT is being used. Double the period of 125
7903	** to 250.
7904	*/
7905	if (sfac <= 10) per = 250;
7906	else if (sfac == 11) per = 303;
7907	else if (sfac == 12) per = 500;
7908	else per = 40 * sfac;
7909
7910	/*
7911	** Look for the greatest clock divisor that allows an
7912	** input speed faster than the period.
7913	*/
7914	kpc = per * clk;
7915	while (--div >= 0)
7916	if (kpc >= (div_10M[div] << 2)) break;
7917
7918	/*
7919	** Calculate the lowest clock factor that allows an output
7920	** speed not faster than the period.
7921	*/
7922	fak = (kpc - 1) / div_10M[div] + 1;
7923
7924	#if 0 /* This optimization does not seem very usefull */
7925
7926	per = (fak * div_10M[div]) / clk;
7927
7928	/*
7929	** Why not to try the immediate lower divisor and to choose
7930	** the one that allows the fastest output speed ?
7931	** We dont want input speed too much greater than output speed.
7932	*/
7933	if (div >= 1 && fak < 8) {
7934	u_longunsigned long fak2, per2;
7935	fak2 = (kpc - 1) / div_10M[div-1] + 1;
7936	per2 = (fak2 * div_10M[div-1]) / clk;
7937	if (per2 < per && fak2 <= 8) {
7938	fak = fak2;
7939	per = per2;
7940	--div;
7941	}
7942	}
7943	#endif
7944
7945	if (fak < 4) fak = 4; /* Should never happen, too bad ... */
7946
7947	/*
7948	** Compute and return sync parameters for the ncr
7949	*/
7950	*fakp = fak - 4;
7951
7952	/*
7953	** If sfac < 25, and 8xx parts, desire that the chip operate at
7954	** least at Ultra speeds. Must set bit 7 of scntl3.
7955	** For C1010, do not set this bit. If operating at Ultra3 speeds,
7956	** set the U3EN bit instead.
7957	*/
7958	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
7959	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
7960	*scntl3p = (div+1) << 4;
7961	*fakp = 0;
7962	}
7963	else {
7964	*scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0);
7965	*fakp = fak - 4;
7966	}
7967	}
7968
7969	/*==========================================================
7970	**
7971	** Utility routine to return the current bus width
7972	** synchronous period and offset.
7973	** Utilizes target sval, wval and uval
7974	**
7975	**==========================================================
7976	*/
7977	static void ncr_get_xfer_info(ncb_p np, tcb_p tp, u_charunsigned char *factor,
7978	u_charunsigned char offset, u_charunsigned char width)
7979	{
7980
7981	u_charunsigned char idiv;
7982	u_longunsigned long period;
7983
7984	*width = (tp->wval & EWS0x08) ? 1 : 0;
7985
7986	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
7987	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21))
7988	*offset = (tp->sval & 0x3f);
7989	else
7990	*offset = (tp->sval & 0x1f);
7991
7992	/*
7993	* Midlayer signal to the driver that all of the scsi commands
7994	* for the integrity check have completed. Save the negotiated
7995	* parameters (extracted from sval, wval and uval).
7996	* See ncr_setsync for alg. details.
7997	*/
7998
7999	idiv = (tp->wval>>4) & 0x07;
8000
8001	if ( *offset && idiv ) {
8002	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8003	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)){
8004	if (tp->uval & 0x80)
8005	period = (2*div_10M[idiv-1])/np->clock_khz;
8006	else
8007	period = (4*div_10M[idiv-1])/np->clock_khz;
8008	}
8009	else
8010	period = (((tp->sval>>5)+4)*div_10M[idiv-1])/np->clock_khz;
8011	}
8012	else
8013	period = 0xffff;
8014
8015	if (period <= 125) *factor = 9;
8016	else if (period <= 250) *factor = 10;
8017	else if (period <= 303) *factor = 11;
8018	else if (period <= 500) *factor = 12;
8019	else *factor = (period + 40 - 1) / 40;
8020
8021	}
8022
8023
8024	/*==========================================================
8025	**
8026	** Set actual values, sync status and patch all ccbs of
8027	** a target according to new sync/wide agreement.
8028	**
8029	**==========================================================
8030	*/
8031
8032	static void ncr_set_sync_wide_status (ncb_p np, u_charunsigned char target)
8033	{
8034	ccb_p cp = np->ccbc;
8035	tcb_p tp = &np->target[target];
8036
8037	/*
8038	** set actual value and sync_status
8039	**
8040	** TEMP register contains current scripts address
8041	** which is data type/direction/dependent.
8042	*/
8043	OUTB (nc_sxfer, tp->sval)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sxfer))))) = (((tp->sval ))));
8044	OUTB (nc_scntl3, tp->wval)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl3))))) = (((tp-> wval))));
8045	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8046	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21))
8047	OUTB (nc_scntl4, tp->uval)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl4))))) = (((tp-> uval))));
8048
8049	/*
8050	** patch ALL ccbs of this target.
8051	*/
8052	for (cp = np->ccbc; cp; cp = cp->link_ccb) {
8053	if (cp->host_statusphys.header.status[1] == HS_IDLE(0))
8054	continue;
8055	if (cp->target != target)
8056	continue;
8057	cp->phys.select.sel_scntl3 = tp->wval;
8058	cp->phys.select.sel_sxfer = tp->sval;
8059	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8060	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21))
8061	cp->phys.select.sel_scntl4 = tp->uval;
8062	};
8063	}
8064
8065	/*==========================================================
8066	**
8067	** Switch sync mode for current job and it's target
8068	**
8069	**==========================================================
8070	*/
8071
8072	static void ncr_setsync (ncb_p np, ccb_p cp, u_charunsigned char scntl3, u_charunsigned char sxfer,
8073	u_charunsigned char scntl4)
8074	{
8075	tcb_p tp;
8076	u_charunsigned char target = INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0x0f;
8077	u_charunsigned char idiv;
8078	u_charunsigned char offset;
8079
8080	assert (cp){ if (!(cp)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "cp", "../linux/src/drivers/scsi/sym53c8xx.c", 8080); } };
8081	if (!cp) return;
8082
8083	assert (target == (cp->target & 0xf)){ if (!(target == (cp->target & 0xf))) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "target == (cp->target & 0xf)", "../linux/src/drivers/scsi/sym53c8xx.c" , 8083); } };
8084
8085	tp = &np->target[target];
8086
8087	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8088	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
8089	offset = sxfer & 0x3f; /* bits 5-0 */
8090	scntl3 = (scntl3 & 0xf0) \| (tp->wval & EWS0x08);
8091	scntl4 = (scntl4 & 0x80);
8092	}
8093	else {
8094	offset = sxfer & 0x1f; /* bits 4-0 */
8095	if (!scntl3 \|\| !offset)
8096	scntl3 = np->rv_scntl3;
8097
8098	scntl3 = (scntl3 & 0xf0) \| (tp->wval & EWS0x08) \|
8099	(np->rv_scntl3 & 0x07);
8100	}
8101
8102
8103	/*
8104	** Deduce the value of controller sync period from scntl3.
8105	** period is in tenths of nano-seconds.
8106	*/
8107
8108	idiv = ((scntl3 >> 4) & 0x7);
8109	if ( offset && idiv) {
8110	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8111	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
8112	/* Note: If extra data hold clocks are used,
8113	* the formulas below must be modified.
8114	* When scntl4 == 0, ST mode.
8115	*/
8116	if (scntl4 & 0x80)
8117	tp->period = (2*div_10M[idiv-1])/np->clock_khz;
8118	else
8119	tp->period = (4*div_10M[idiv-1])/np->clock_khz;
8120	}
8121	else
8122	tp->period = (((sxfer>>5)+4)*div_10M[idiv-1])/np->clock_khz;
8123	}
8124	else
8125	tp->period = 0xffff;
8126
8127
8128	/*
8129	** Stop there if sync parameters are unchanged
8130	*/
8131	if (tp->sval == sxfer && tp->wval == scntl3 && tp->uval == scntl4) return;
8132	tp->sval = sxfer;
8133	tp->wval = scntl3;
8134	tp->uval = scntl4;
8135
8136	/*
8137	** Bells and whistles ;-)
8138	** Donnot announce negotiations due to auto-sense,
8139	** unless user really want us to be verbose. :)
8140	*/
8141	if ( bootverbose(np->verbose) < 2 && (cp->host_flagsphys.header.status[3] & HF_AUTO_SENSE(1u<<4)))
8142	goto next;
8143	PRINT_TARGET(np, target);
8144	if (offset) {
8145	unsigned f10 = 100000 << (tp->widedone ? tp->widedone -1 : 0);
8146	unsigned mb10 = (f10 + tp->period/2) / tp->period;
8147	char *scsi;
8148
8149	/*
8150	** Disable extended Sreq/Sack filtering
8151	*/
8152	if ((tp->period <= 2000) &&
8153	(np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
8154	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
8155	OUTOFFB (nc_stest2, EXT)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest2))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest2))))) & ~(0x02)))));
8156
8157	/*
8158	** Bells and whistles ;-)
8159	*/
8160	if (tp->period < 250) scsi = "FAST-80";
8161	else if (tp->period < 500) scsi = "FAST-40";
8162	else if (tp->period < 1000) scsi = "FAST-20";
8163	else if (tp->period < 2000) scsi = "FAST-10";
8164	else scsi = "FAST-5";
8165
8166	printk ("%s %sSCSI %d.%d MB/s (%d ns, offset %d)\n", scsi,
8167	tp->widedone > 1 ? "WIDE " : "",
8168	mb10 / 10, mb10 % 10, tp->period / 10, offset);
8169	} else
8170	printk ("%sasynchronous.\n", tp->widedone > 1 ? "wide " : "");
8171	next:
8172	/*
8173	** set actual value and sync_status
8174	** patch ALL ccbs of this target.
8175	*/
8176	ncr_set_sync_wide_status(np, target);
8177	}
8178
8179
8180	/*==========================================================
8181	**
8182	** Switch wide mode for current job and it's target
8183	** SCSI specs say: a SCSI device that accepts a WDTR
8184	** message shall reset the synchronous agreement to
8185	** asynchronous mode.
8186	**
8187	**==========================================================
8188	*/
8189
8190	static void ncr_setwide (ncb_p np, ccb_p cp, u_charunsigned char wide, u_charunsigned char ack)
8191	{
8192	u_shortunsigned short target = INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0x0f;
8193	tcb_p tp;
8194	u_charunsigned char scntl3;
8195	u_charunsigned char sxfer;
8196
8197	assert (cp){ if (!(cp)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "cp", "../linux/src/drivers/scsi/sym53c8xx.c", 8197); } };
8198	if (!cp) return;
8199
8200	assert (target == (cp->target & 0xf)){ if (!(target == (cp->target & 0xf))) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "target == (cp->target & 0xf)", "../linux/src/drivers/scsi/sym53c8xx.c" , 8200); } };
8201
8202	tp = &np->target[target];
8203	tp->widedone = wide+1;
8204	scntl3 = (tp->wval & (~EWS0x08)) \| (wide ? EWS0x08 : 0);
8205
8206	sxfer = ack ? 0 : tp->sval;
8207
8208	/*
8209	** Stop there if sync/wide parameters are unchanged
8210	*/
8211	if (tp->sval == sxfer && tp->wval == scntl3) return;
8212	tp->sval = sxfer;
8213	tp->wval = scntl3;
8214
8215	/*
8216	** Bells and whistles ;-)
8217	*/
8218	if (bootverbose(np->verbose) >= 2) {
8219	PRINT_TARGET(np, target);
8220	if (scntl3 & EWS0x08)
8221	printk ("WIDE SCSI (16 bit) enabled.\n");
8222	else
8223	printk ("WIDE SCSI disabled.\n");
8224	}
8225
8226	/*
8227	** set actual value and sync_status
8228	** patch ALL ccbs of this target.
8229	*/
8230	ncr_set_sync_wide_status(np, target);
8231	}
8232
8233
8234	/*==========================================================
8235	**
8236	** Switch sync/wide mode for current job and it's target
8237	** PPR negotiations only
8238	**
8239	**==========================================================
8240	*/
8241
8242	static void ncr_setsyncwide (ncb_p np, ccb_p cp, u_charunsigned char scntl3, u_charunsigned char sxfer,
8243	u_charunsigned char scntl4, u_charunsigned char wide)
8244	{
8245	tcb_p tp;
8246	u_charunsigned char target = INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0x0f;
8247	u_charunsigned char idiv;
8248	u_charunsigned char offset;
8249
8250	assert (cp){ if (!(cp)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "cp", "../linux/src/drivers/scsi/sym53c8xx.c", 8250); } };
8251	if (!cp) return;
8252
8253	assert (target == (cp->target & 0xf)){ if (!(target == (cp->target & 0xf))) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "target == (cp->target & 0xf)", "../linux/src/drivers/scsi/sym53c8xx.c" , 8253); } };
8254
8255	tp = &np->target[target];
8256	tp->widedone = wide+1;
8257
8258	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8259	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
8260	offset = sxfer & 0x3f; /* bits 5-0 */
8261	scntl3 = (scntl3 & 0xf0) \| (wide ? EWS0x08 : 0);
8262	scntl4 = (scntl4 & 0x80);
8263	}
8264	else {
8265	offset = sxfer & 0x1f; /* bits 4-0 */
8266	if (!scntl3 \|\| !offset)
8267	scntl3 = np->rv_scntl3;
8268
8269	scntl3 = (scntl3 & 0xf0) \| (wide ? EWS0x08 : 0) \|
8270	(np->rv_scntl3 & 0x07);
8271	}
8272
8273
8274	/*
8275	** Deduce the value of controller sync period from scntl3.
8276	** period is in tenths of nano-seconds.
8277	*/
8278
8279	idiv = ((scntl3 >> 4) & 0x7);
8280	if ( offset && idiv) {
8281	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8282	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
8283	/* Note: If extra data hold clocks are used,
8284	* the formulas below must be modified.
8285	* When scntl4 == 0, ST mode.
8286	*/
8287	if (scntl4 & 0x80)
8288	tp->period = (2*div_10M[idiv-1])/np->clock_khz;
8289	else
8290	tp->period = (4*div_10M[idiv-1])/np->clock_khz;
8291	}
8292	else
8293	tp->period = (((sxfer>>5)+4)*div_10M[idiv-1])/np->clock_khz;
8294	}
8295	else
8296	tp->period = 0xffff;
8297
8298
8299	/*
8300	** Stop there if sync parameters are unchanged
8301	*/
8302	if (tp->sval == sxfer && tp->wval == scntl3 && tp->uval == scntl4) return;
8303	tp->sval = sxfer;
8304	tp->wval = scntl3;
8305	tp->uval = scntl4;
8306
8307	/*
8308	** Bells and whistles ;-)
8309	** Donnot announce negotiations due to auto-sense,
8310	** unless user really want us to be verbose. :)
8311	*/
8312	if ( bootverbose(np->verbose) < 2 && (cp->host_flagsphys.header.status[3] & HF_AUTO_SENSE(1u<<4)))
8313	goto next;
8314	PRINT_TARGET(np, target);
8315	if (offset) {
8316	unsigned f10 = 100000 << (tp->widedone ? tp->widedone -1 : 0);
8317	unsigned mb10 = (f10 + tp->period/2) / tp->period;
8318	char *scsi;
8319
8320	/*
8321	** Disable extended Sreq/Sack filtering
8322	*/
8323	if ((tp->period <= 2000) &&
8324	(np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
8325	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
8326	OUTOFFB (nc_stest2, EXT)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest2))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest2))))) & ~(0x02)))));
8327
8328	/*
8329	** Bells and whistles ;-)
8330	*/
8331	if (tp->period < 250) scsi = "FAST-80";
8332	else if (tp->period < 500) scsi = "FAST-40";
8333	else if (tp->period < 1000) scsi = "FAST-20";
8334	else if (tp->period < 2000) scsi = "FAST-10";
8335	else scsi = "FAST-5";
8336
8337	printk ("%s %sSCSI %d.%d MB/s (%d ns, offset %d)\n", scsi,
8338	tp->widedone > 1 ? "WIDE " : "",
8339	mb10 / 10, mb10 % 10, tp->period / 10, offset);
8340	} else
8341	printk ("%sasynchronous.\n", tp->widedone > 1 ? "wide " : "");
8342	next:
8343	/*
8344	** set actual value and sync_status
8345	** patch ALL ccbs of this target.
8346	*/
8347	ncr_set_sync_wide_status(np, target);
8348	}
8349
8350
8351
8352
8353	/*==========================================================
8354	**
8355	** Switch tagged mode for a target.
8356	**
8357	**==========================================================
8358	*/
8359
8360	static void ncr_setup_tags (ncb_p np, u_charunsigned char tn, u_charunsigned char ln)
8361	{
8362	tcb_p tp = &np->target[tn];
8363	lcb_p lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
8364	u_shortunsigned short reqtags, maxdepth;
8365
8366	/*
8367	** Just in case ...
8368	*/
8369	if ((!tp) \|\| (!lp))
8370	return;
8371
8372	/*
8373	** If SCSI device queue depth is not yet set, leave here.
8374	*/
8375	if (!lp->scdev_depth)
8376	return;
8377
8378	/*
8379	** Donnot allow more tags than the SCSI driver can queue
8380	** for this device.
8381	** Donnot allow more tags than we can handle.
8382	*/
8383	maxdepth = lp->scdev_depth;
8384	if (maxdepth > lp->maxnxs) maxdepth = lp->maxnxs;
8385	if (lp->maxtags > maxdepth) lp->maxtags = maxdepth;
8386	if (lp->numtags > maxdepth) lp->numtags = maxdepth;
8387
8388	/*
8389	** only devices conformant to ANSI Version >= 2
8390	** only devices capable of tagged commands
8391	** only if enabled by user ..
8392	*/
8393	if ((lp->inq_byte7 & INQ7_QUEUE(0x02)) && lp->numtags > 1) {
8394	reqtags = lp->numtags;
8395	} else {
8396	reqtags = 1;
8397	};
8398
8399	/*
8400	** Update max number of tags
8401	*/
8402	lp->numtags = reqtags;
8403	if (lp->numtags > lp->maxtags)
8404	lp->maxtags = lp->numtags;
8405
8406	/*
8407	** If we want to switch tag mode, we must wait
8408	** for no CCB to be active.
8409	*/
8410	if (reqtags > 1 && lp->usetags) { /* Stay in tagged mode */
8411	if (lp->queuedepth == reqtags) /* Already announced */
8412	return;
8413	lp->queuedepth = reqtags;
8414	}
8415	else if (reqtags <= 1 && !lp->usetags) { /* Stay in untagged mode */
8416	lp->queuedepth = reqtags;
8417	return;
8418	}
8419	else { /* Want to switch tag mode */
8420	if (lp->busyccbs) /* If not yet safe, return */
8421	return;
8422	lp->queuedepth = reqtags;
8423	lp->usetags = reqtags > 1 ? 1 : 0;
8424	}
8425
8426	/*
8427	** Patch the lun mini-script, according to tag mode.
8428	*/
8429	lp->resel_task = lp->usetags?
8430	cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_tag))((np->p_script + ((size_t) (&((struct script *)0)-> resel_tag)))) :
8431	cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_notag))((np->p_script + ((size_t) (&((struct script *)0)-> resel_notag))));
8432
8433	/*
8434	** Announce change to user.
8435	*/
8436	if (bootverbose(np->verbose)) {
8437	PRINT_LUN(np, tn, ln);
8438	if (lp->usetags)
8439	printk("tagged command queue depth set to %d\n", reqtags);
8440	else
8441	printk("tagged command queueing disabled\n");
8442	}
8443	}
8444
8445	/*----------------------------------------------------
8446	**
8447	** handle user commands
8448	**
8449	**----------------------------------------------------
8450	*/
8451
8452	#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
8453
8454	static void ncr_usercmd (ncb_p np)
8455	{
8456	u_charunsigned char t;
8457	tcb_p tp;
8458	int ln;
8459	u_longunsigned long size;
8460
8461	switch (np->user.cmd) {
8462	case 0: return;
8463
8464	case UC_SETDEBUG12:
8465	#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
8466	ncr_debug = np->user.data;
8467	#endif
8468	break;
8469
8470	case UC_SETORDER13:
8471	np->order = np->user.data;
8472	break;
8473
8474	case UC_SETVERBOSE17:
8475	np->verbose = np->user.data;
8476	break;
8477
8478	default:
8479	/*
8480	** We assume that other commands apply to targets.
8481	** This should always be the case and avoid the below
8482	** 4 lines to be repeated 5 times.
8483	*/
8484	for (t = 0; t < MAX_TARGET((16)); t++) {
8485	if (!((np->user.target >> t) & 1))
8486	continue;
8487	tp = &np->target[t];
8488
8489	switch (np->user.cmd) {
8490
8491	case UC_SETSYNC10:
8492	tp->usrsync = np->user.data;
8493	ncr_negotiate (np, tp);
8494	break;
8495
8496	case UC_SETWIDE14:
8497	size = np->user.data;
8498	if (size > np->maxwide)
8499	size=np->maxwide;
8500	tp->usrwide = size;
8501	ncr_negotiate (np, tp);
8502	break;
8503
8504	case UC_SETTAGS11:
8505	tp->usrtags = np->user.data;
8506	for (ln = 0; ln < MAX_LUN64; ln++) {
8507	lcb_p lp;
8508	lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
8509	if (!lp)
8510	continue;
8511	lp->numtags = np->user.data;
8512	lp->maxtags = lp->numtags;
8513	ncr_setup_tags (np, t, ln);
8514	}
8515	break;
8516
8517	case UC_RESETDEV18:
8518	tp->to_reset = 1;
8519	np->istat_sem = SEM0x10;
8520	OUTB (nc_istat, SIGP\|SEM)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20\|0x10 ))));
8521	break;
8522
8523	case UC_CLEARDEV19:
8524	for (ln = 0; ln < MAX_LUN64; ln++) {
8525	lcb_p lp;
8526	lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
8527	if (lp)
8528	lp->to_clear = 1;
8529	}
8530	np->istat_sem = SEM0x10;
8531	OUTB (nc_istat, SIGP\|SEM)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20\|0x10 ))));
8532	break;
8533
8534	case UC_SETFLAG15:
8535	tp->usrflag = np->user.data;
8536	break;
8537	}
8538	}
8539	break;
8540	}
8541	np->user.cmd=0;
8542	}
8543	#endif
8544
8545	/*==========================================================
8546	**
8547	**
8548	** ncr timeout handler.
8549	**
8550	**
8551	**==========================================================
8552	**
8553	** Misused to keep the driver running when
8554	** interrupts are not configured correctly.
8555	**
8556	**----------------------------------------------------------
8557	*/
8558
8559	static void ncr_timeout (ncb_p np)
8560	{
8561	u_longunsigned long thistime = ktime_get(0)(jiffies + (unsigned long) 0);
8562
8563	/*
8564	** If release process in progress, let's go
8565	** Set the release stage from 1 to 2 to synchronize
8566	** with the release process.
8567	*/
8568
8569	if (np->release_stage) {
8570	if (np->release_stage == 1) np->release_stage = 2;
8571	return;
8572	}
8573
8574	#ifdef SCSI_NCR_PCIQ_BROKEN_INTR
8575	np->timer.expires = ktime_get((HZ+9)/10)(jiffies + (unsigned long) (100 +9)/10);
8576	#else
8577	np->timer.expires = ktime_get(SCSI_NCR_TIMER_INTERVAL)(jiffies + (unsigned long) (100));
8578	#endif
8579	add_timer(&np->timer);
8580
8581	/*
8582	** If we are resetting the ncr, wait for settle_time before
8583	** clearing it. Then command processing will be resumed.
8584	*/
8585	if (np->settle_time) {
8586	if (np->settle_time <= thistime) {
8587	if (bootverbose(np->verbose) > 1)
8588	printk("%s: command processing resumed\n", ncr_name(np));
8589	np->settle_time = 0;
8590	requeue_waiting_list(np)process_waiting_list((np), 0x00);
8591	}
8592	return;
8593	}
8594
8595	/*
8596	** Nothing to do for now, but that may come.
8597	*/
8598	if (np->lasttime + 4*HZ100 < thistime) {
8599	np->lasttime = thistime;
8600	}
8601
8602	#ifdef SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
8603	/*
8604	** Some way-broken PCI bridges may lead to
8605	** completions being lost when the clearing
8606	** of the INTFLY flag by the CPU occurs
8607	** concurrently with the chip raising this flag.
8608	** If this ever happen, lost completions will
8609	** be reaped here.
8610	*/
8611	ncr_wakeup_done(np);
8612	#endif
8613
8614	#ifdef SCSI_NCR_PCIQ_BROKEN_INTR
8615	if (INB(nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat))))) & (INTF0x04\|SIP0x02\|DIP0x01)) {
8616
8617	/*
8618	** Process pending interrupts.
8619	*/
8620	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("{");
8621	ncr_exception (np);
8622	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("}");
8623	}
8624	#endif /* SCSI_NCR_PCIQ_BROKEN_INTR */
8625	}
8626
8627	/*==========================================================
8628	**
8629	** log message for real hard errors
8630	**
8631	** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)."
8632	** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf."
8633	**
8634	** exception register:
8635	** ds: dstat
8636	** si: sist
8637	**
8638	** SCSI bus lines:
8639	** so: control lines as driven by NCR.
8640	** si: control lines as seen by NCR.
8641	** sd: scsi data lines as seen by NCR.
8642	**
8643	** wide/fastmode:
8644	** sxfer: (see the manual)
8645	** scntl3: (see the manual)
8646	**
8647	** current script command:
8648	** dsp: script address (relative to start of script).
8649	** dbc: first word of script command.
8650	**
8651	** First 24 register of the chip:
8652	** r0..rf
8653	**
8654	**==========================================================
8655	*/
8656
8657	static void ncr_log_hard_error(ncb_p np, u_shortunsigned short sist, u_charunsigned char dstat)
8658	{
8659	u_int32 dsp;
8660	int script_ofs;
8661	int script_size;
8662	char *script_name;
8663	u_charunsigned char *script_base;
8664	int i;
8665
8666	dsp = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
8667
8668	if (dsp > np->p_script && dsp <= np->p_script + sizeof(struct script)) {
8669	script_ofs = dsp - np->p_script;
8670	script_size = sizeof(struct script);
8671	script_base = (u_charunsigned char *) np->script0;
8672	script_name = "script";
8673	}
8674	else if (np->p_scripth < dsp &&
8675	dsp <= np->p_scripth + sizeof(struct scripth)) {
8676	script_ofs = dsp - np->p_scripth;
8677	script_size = sizeof(struct scripth);
8678	script_base = (u_charunsigned char *) np->scripth0;
8679	script_name = "scripth";
8680	} else {
8681	script_ofs = dsp;
8682	script_size = 0;
8683	script_base = 0;
8684	script_name = "mem";
8685	}
8686
8687	printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n",
8688	ncr_name (np), (unsigned)INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid)))))&0x0f, dstat, sist,
8689	(unsigned)INB (nc_socl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_socl))))), (unsigned)INB (nc_sbcl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbcl))))), (unsigned)INB (nc_sbdl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbdl))))),
8690	(unsigned)INB (nc_sxfer)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sxfer))))),(unsigned)INB (nc_scntl3)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl3))))), script_name, script_ofs,
8691	(unsigned)INL (nc_dbc)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dbc))))));
8692
8693	if (((script_ofs & 3) == 0) &&
8694	(unsigned)script_ofs < script_size) {
8695	printk ("%s: script cmd = %08x\n", ncr_name(np),
8696	scr_to_cpu((int) (ncrcmd )(script_base + script_ofs))((int) (ncrcmd )(script_base + script_ofs)));
8697	}
8698
8699	printk ("%s: regdump:", ncr_name(np));
8700	for (i=0; i<24;i++)
8701	printk (" %02x", (unsigned)INB_OFF(i)((volatile unsigned char ) ((char *)np->reg + (i))));
8702	printk (".\n");
8703	}
8704
8705	/*============================================================
8706	**
8707	** ncr chip exception handler.
8708	**
8709	**============================================================
8710	**
8711	** In normal situations, interrupt conditions occur one at
8712	** a time. But when something bad happens on the SCSI BUS,
8713	** the chip may raise several interrupt flags before
8714	** stopping and interrupting the CPU. The additionnal
8715	** interrupt flags are stacked in some extra registers
8716	** after the SIP and/or DIP flag has been raised in the
8717	** ISTAT. After the CPU has read the interrupt condition
8718	** flag from SIST or DSTAT, the chip unstacks the other
8719	** interrupt flags and sets the corresponding bits in
8720	** SIST or DSTAT. Since the chip starts stacking once the
8721	** SIP or DIP flag is set, there is a small window of time
8722	** where the stacking does not occur.
8723	**
8724	** Typically, multiple interrupt conditions may happen in
8725	** the following situations:
8726	**
8727	** - SCSI parity error + Phase mismatch (PAR\|MA)
8728	** When an parity error is detected in input phase
8729	** and the device switches to msg-in phase inside a
8730	** block MOV.
8731	** - SCSI parity error + Unexpected disconnect (PAR\|UDC)
8732	** When a stupid device does not want to handle the
8733	** recovery of an SCSI parity error.
8734	** - Some combinations of STO, PAR, UDC, ...
8735	** When using non compliant SCSI stuff, when user is
8736	** doing non compliant hot tampering on the BUS, when
8737	** something really bad happens to a device, etc ...
8738	**
8739	** The heuristic suggested by SYMBIOS to handle
8740	** multiple interrupts is to try unstacking all
8741	** interrupts conditions and to handle them on some
8742	** priority based on error severity.
8743	** This will work when the unstacking has been
8744	** successful, but we cannot be 100 % sure of that,
8745	** since the CPU may have been faster to unstack than
8746	** the chip is able to stack. Hmmm ... But it seems that
8747	** such a situation is very unlikely to happen.
8748	**
8749	** If this happen, for example STO catched by the CPU
8750	** then UDC happenning before the CPU have restarted
8751	** the SCRIPTS, the driver may wrongly complete the
8752	** same command on UDC, since the SCRIPTS didn't restart
8753	** and the DSA still points to the same command.
8754	** We avoid this situation by setting the DSA to an
8755	** invalid value when the CCB is completed and before
8756	** restarting the SCRIPTS.
8757	**
8758	** Another issue is that we need some section of our
8759	** recovery procedures to be somehow uninterruptible and
8760	** that the SCRIPTS processor does not provides such a
8761	** feature. For this reason, we handle recovery preferently
8762	** from the C code and check against some SCRIPTS
8763	** critical sections from the C code.
8764	**
8765	** Hopefully, the interrupt handling of the driver is now
8766	** able to resist to weird BUS error conditions, but donnot
8767	** ask me for any guarantee that it will never fail. :-)
8768	** Use at your own decision and risk.
8769	**
8770	**============================================================
8771	*/
8772
8773	void ncr_exception (ncb_p np)
8774	{
8775	u_charunsigned char istat, istatc;
8776	u_charunsigned char dstat;
8777	u_shortunsigned short sist;
8778	int i;
8779
8780	/*
8781	** interrupt on the fly ?
8782	**
8783	** A `dummy read' is needed to ensure that the
8784	** clear of the INTF flag reaches the device
8785	** before the scanning of the DONE queue.
8786	*/
8787	istat = INB (nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat)))));
8788	if (istat & INTF0x04) {
8789	OUTB (nc_istat, (istat & SIGP) \| INTF \| np->istat_sem)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = ((((istat & 0x20) \| 0x04 \| np->istat_sem))));
8790	istat = INB (nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat))))); /* DUMMY READ */
8791	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("F ");
8792	(void)ncr_wakeup_done (np);
8793	};
8794
8795	if (!(istat & (SIP0x02\|DIP0x01)))
8796	return;
8797
8798	#if 0 /* We should never get this one */
8799	if (istat & CABRT0x80)
8800	OUTB (nc_istat, CABRT)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x80))));
8801	#endif
8802
8803	/*
8804	** Steinbach's Guideline for Systems Programming:
8805	** Never test for an error condition you don't know how to handle.
8806	*/
8807
8808	/*========================================================
8809	** PAR and MA interrupts may occur at the same time,
8810	** and we need to know of both in order to handle
8811	** this situation properly. We try to unstack SCSI
8812	** interrupts for that reason. BTW, I dislike a LOT
8813	** such a loop inside the interrupt routine.
8814	** Even if DMA interrupt stacking is very unlikely to
8815	** happen, we also try unstacking these ones, since
8816	** this has no performance impact.
8817	**=========================================================
8818	*/
8819	sist = 0;
8820	dstat = 0;
8821	istatc = istat;
8822	do {
8823	if (istatc & SIP0x02)
8824	sist \|= INW (nc_sist)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sist)))));
8825	if (istatc & DIP0x01)
8826	dstat \|= INB (nc_dstat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dstat)))));
8827	istatc = INB (nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat)))));
8828	istat \|= istatc;
8829	} while (istatc & (SIP0x02\|DIP0x01));
8830
8831	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080))
8832	printk ("<%d\|%x:%x\|%x:%x>",
8833	(int)INB(nc_scr0)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr0))))),
8834	dstat,sist,
8835	(unsigned)INL(nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp))))),
8836	(unsigned)INL(nc_dbc)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dbc))))));
8837
8838	/*
8839	** On paper, a memory barrier may be needed here.
8840	** And since we are paranoid ... :)
8841	*/
8842	MEMORY_BARRIER()do { ; } while(0);
8843
8844	/*========================================================
8845	** First, interrupts we want to service cleanly.
8846	**
8847	** Phase mismatch (MA) is the most frequent interrupt
8848	** for chip earlier than the 896 and so we have to service
8849	** it as quickly as possible.
8850	** A SCSI parity error (PAR) may be combined with a phase
8851	** mismatch condition (MA).
8852	** Programmed interrupts (SIR) are used to call the C code
8853	** from SCRIPTS.
8854	** The single step interrupt (SSI) is not used in this
8855	** driver.
8856	**=========================================================
8857	*/
8858
8859	if (!(sist & (STO0x0400\|GEN0x0200\|HTH0x0100\|SGE0x08\|UDC0x04\|SBMC0x1000\|RST0x02)) &&
8860	!(dstat & (MDPE0x40\|BF0x20\|ABRT0x10\|IID0x01))) {
8861	if (sist & PAR0x01) ncr_int_par (np, sist);
8862	else if (sist & MA0x80) ncr_int_ma (np);
8863	else if (dstat & SIR0x04) ncr_int_sir (np);
8864	else if (dstat & SSI0x08) OUTONB_STD ()do { do { ; } while(0); (((volatile unsigned char ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dcntl ))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dcntl))))) \| ( (0x04\|0x01)))))); } while (0);
8865	else goto unknown_int;
8866	return;
8867	};
8868
8869	/*========================================================
8870	** Now, interrupts that donnot happen in normal
8871	** situations and that we may need to recover from.
8872	**
8873	** On SCSI RESET (RST), we reset everything.
8874	** On SCSI BUS MODE CHANGE (SBMC), we complete all
8875	** active CCBs with RESET status, prepare all devices
8876	** for negotiating again and restart the SCRIPTS.
8877	** On STO and UDC, we complete the CCB with the corres-
8878	** ponding status and restart the SCRIPTS.
8879	**=========================================================
8880	*/
8881
8882	if (sist & RST0x02) {
8883	ncr_init (np, 1, bootverbose(np->verbose) ? "scsi reset" : NULL((void *) 0), HS_RESET(6\|(0x80)));
8884	return;
8885	};
8886
8887	OUTB (nc_ctest3, np->rv_ctest3 \| CLF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((np-> rv_ctest3 \| 0x04)))); /* clear dma fifo */
8888	OUTB (nc_stest3, TE\|CSF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80\|0x02 )))); /* clear scsi fifo */
8889
8890	if (!(sist & (GEN0x0200\|HTH0x0100\|SGE0x08)) &&
8891	!(dstat & (MDPE0x40\|BF0x20\|ABRT0x10\|IID0x01))) {
8892	if (sist & SBMC0x1000) ncr_int_sbmc (np);
8893	else if (sist & STO0x0400) ncr_int_sto (np);
8894	else if (sist & UDC0x04) ncr_int_udc (np);
8895	else goto unknown_int;
8896	return;
8897	};
8898
8899	/*=========================================================
8900	** Now, interrupts we are not able to recover cleanly.
8901	**
8902	** Do the register dump.
8903	** Log message for hard errors.
8904	** Reset everything.
8905	**=========================================================
8906	*/
8907	if (ktime_exp(np->regtime)((long)(jiffies) - (long)(np->regtime) >= 0)) {
8908	np->regtime = ktime_get(10HZ)(jiffies + (unsigned long) 10100);
8909	for (i = 0; i<sizeof(np->regdump); i++)
8910	((char)&np->regdump)[i] = INB_OFF(i)((volatile unsigned char ) ((char )np->reg + (i)));
8911	np->regdump.nc_dstat = dstat;
8912	np->regdump.nc_sist = sist;
8913	};
8914
8915	ncr_log_hard_error(np, sist, dstat);
8916
8917	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
8918	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
8919	u_charunsigned char ctest4_o, ctest4_m;
8920	u_charunsigned char shadow;
8921
8922	/*
8923	* Get shadow register data
8924	* Write 1 to ctest4
8925	*/
8926	ctest4_o = INB(nc_ctest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest4)))));
8927
8928	OUTB(nc_ctest4, ctest4_o \| 0x10)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest4))))) = (((ctest4_o \| 0x10))));
8929
8930	ctest4_m = INB(nc_ctest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_ctest4)))));
8931	shadow = INW_OFF(0x42)((volatile unsigned short ) ((char *)np->reg + (0x42)));
8932
8933	OUTB(nc_ctest4, ctest4_o)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest4))))) = (((ctest4_o ))));
8934
8935	printk("%s: ctest4/sist original 0x%x/0x%X mod: 0x%X/0x%x\n",
8936	ncr_name(np), ctest4_o, sist, ctest4_m, shadow);
8937	}
8938
8939	if ((sist & (GEN0x0200\|HTH0x0100\|SGE0x08)) \|\|
8940	(dstat & (MDPE0x40\|BF0x20\|ABRT0x10\|IID0x01))) {
8941	ncr_start_reset(np);
8942	return;
8943	};
8944
8945	unknown_int:
8946	/*=========================================================
8947	** We just miss the cause of the interrupt. :(
8948	** Print a message. The timeout will do the real work.
8949	**=========================================================
8950	*/
8951	printk( "%s: unknown interrupt(s) ignored, "
8952	"ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n",
8953	ncr_name(np), istat, dstat, sist);
8954	}
8955
8956
8957	/*==========================================================
8958	**
8959	** generic recovery from scsi interrupt
8960	**
8961	**==========================================================
8962	**
8963	** The doc says that when the chip gets an SCSI interrupt,
8964	** it tries to stop in an orderly fashion, by completing
8965	** an instruction fetch that had started or by flushing
8966	** the DMA fifo for a write to memory that was executing.
8967	** Such a fashion is not enough to know if the instruction
8968	** that was just before the current DSP value has been
8969	** executed or not.
8970	**
8971	** There are 3 small SCRIPTS sections that deal with the
8972	** start queue and the done queue that may break any
8973	** assomption from the C code if we are interrupted
8974	** inside, so we reset if it happens. Btw, since these
8975	** SCRIPTS sections are executed while the SCRIPTS hasn't
8976	** started SCSI operations, it is very unlikely to happen.
8977	**
8978	** All the driver data structures are supposed to be
8979	** allocated from the same 4 GB memory window, so there
8980	** is a 1 to 1 relationship between DSA and driver data
8981	** structures. Since we are careful :) to invalidate the
8982	** DSA when we complete a command or when the SCRIPTS
8983	** pushes a DSA into a queue, we can trust it when it
8984	** points to a CCB.
8985	**
8986	**----------------------------------------------------------
8987	*/
8988	static void ncr_recover_scsi_int (ncb_p np, u_charunsigned char hsts)
8989	{
8990	u_int32 dsp = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
8991	u_int32 dsa = INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa)))));
8992	ccb_p cp = ncr_ccb_from_dsa(np, dsa);
8993
8994	/*
8995	** If we haven't been interrupted inside the SCRIPTS
8996	** critical pathes, we can safely restart the SCRIPTS
8997	** and trust the DSA value if it matches a CCB.
8998	*/
8999	if ((!(dsp > NCB_SCRIPT_PHYS (np, getjob_begin)(np->p_script + ((size_t) (&((struct script *)0)->getjob_begin ))) &&
9000	dsp < NCB_SCRIPT_PHYS (np, getjob_end)(np->p_script + ((size_t) (&((struct script *)0)->getjob_end ))) + 1)) &&
9001	(!(dsp > NCB_SCRIPT_PHYS (np, ungetjob)(np->p_script + ((size_t) (&((struct script *)0)->ungetjob ))) &&
9002	dsp < NCB_SCRIPT_PHYS (np, reselect)(np->p_script + ((size_t) (&((struct script *)0)->reselect ))) + 1)) &&
9003	(!(dsp > NCB_SCRIPTH_PHYS (np, sel_for_abort)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> sel_for_abort))) &&
9004	dsp < NCB_SCRIPTH_PHYS (np, sel_for_abort_1)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> sel_for_abort_1))) + 1)) &&
9005	(!(dsp > NCB_SCRIPT_PHYS (np, done)(np->p_script + ((size_t) (&((struct script *)0)->done ))) &&
9006	dsp < NCB_SCRIPT_PHYS (np, done_end)(np->p_script + ((size_t) (&((struct script *)0)->done_end ))) + 1))) {
9007	if (cp) {
9008	cp->host_statusphys.header.status[1] = hsts;
9009	ncr_complete (np, cp);
9010	}
9011	OUTL (nc_dsa, DSA_INVALID)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsa))))) = (((0xffffffff) )));
9012	OUTB (nc_ctest3, np->rv_ctest3 \| CLF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((np-> rv_ctest3 \| 0x04)))); /* clear dma fifo */
9013	OUTB (nc_stest3, TE\|CSF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80\|0x02 )))); /* clear scsi fifo */
9014	OUTL_DSP (NCB_SCRIPT_PHYS (np, start))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->start)))))))); } while (0);
9015	}
9016	else
9017	goto reset_all;
9018
9019	return;
9020
9021	reset_all:
9022	ncr_start_reset(np);
9023	}
9024
9025	/*==========================================================
9026	**
9027	** ncr chip exception handler for selection timeout
9028	**
9029	**==========================================================
9030	**
9031	** There seems to be a bug in the 53c810.
9032	** Although a STO-Interrupt is pending,
9033	** it continues executing script commands.
9034	** But it will fail and interrupt (IID) on
9035	** the next instruction where it's looking
9036	** for a valid phase.
9037	**
9038	**----------------------------------------------------------
9039	*/
9040
9041	void ncr_int_sto (ncb_p np)
9042	{
9043	u_int32 dsp = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
9044
9045	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("T");
9046
9047	if (dsp == NCB_SCRIPT_PHYS (np, wf_sel_done)(np->p_script + ((size_t) (&((struct script *)0)->wf_sel_done ))) + 8 \|\|
9048	!(driver_setup.recovery & 1))
9049	ncr_recover_scsi_int(np, HS_SEL_TIMEOUT(5\|(0x80)));
9050	else
9051	ncr_start_reset(np);
9052	}
9053
9054	/*==========================================================
9055	**
9056	** ncr chip exception handler for unexpected disconnect
9057	**
9058	**==========================================================
9059	**
9060	**----------------------------------------------------------
9061	*/
9062	void ncr_int_udc (ncb_p np)
9063	{
9064	u_int32 dsa = INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa)))));
9065	ccb_p cp = ncr_ccb_from_dsa(np, dsa);
9066	tcb_p tp = &np->target[cp->target];
9067
9068	/*
9069	* Fix Up. Some disks respond to a PPR negotation with
9070	* a bus free instead of a message reject.
9071	* Disable ppr negotiation if this is first time
9072	* tried ppr negotiation.
9073	*/
9074
9075	if (tp->ppr_negotiation == 1)
9076	tp->ppr_negotiation = 0;
9077
9078	printk ("%s: unexpected disconnect\n", ncr_name(np));
9079	ncr_recover_scsi_int(np, HS_UNEXPECTED(10\|(0x80)));
9080	}
9081
9082	/*==========================================================
9083	**
9084	** ncr chip exception handler for SCSI bus mode change
9085	**
9086	**==========================================================
9087	**
9088	** spi2-r12 11.2.3 says a transceiver mode change must
9089	** generate a reset event and a device that detects a reset
9090	** event shall initiate a hard reset. It says also that a
9091	** device that detects a mode change shall set data transfer
9092	** mode to eight bit asynchronous, etc...
9093	** So, just resetting should be enough.
9094	**
9095	**
9096	**----------------------------------------------------------
9097	*/
9098
9099	static void ncr_int_sbmc (ncb_p np)
9100	{
9101	u_charunsigned char scsi_mode = INB (nc_stest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest4))))) & SMODE0xc0;
9102
9103	printk("%s: SCSI bus mode change from %x to %x.\n",
9104	ncr_name(np), np->scsi_mode, scsi_mode);
9105
9106	np->scsi_mode = scsi_mode;
9107
9108
9109	/*
9110	** Suspend command processing for 1 second and
9111	** reinitialize all except the chip.
9112	*/
9113	np->settle_time = ktime_get(1HZ)(jiffies + (unsigned long) 1100);
9114	ncr_init (np, 0, bootverbose(np->verbose) ? "scsi mode change" : NULL((void *) 0), HS_RESET(6\|(0x80)));
9115	}
9116
9117	/*==========================================================
9118	**
9119	** ncr chip exception handler for SCSI parity error.
9120	**
9121	**==========================================================
9122	**
9123	** When the chip detects a SCSI parity error and is
9124	** currently executing a (CH)MOV instruction, it does
9125	** not interrupt immediately, but tries to finish the
9126	** transfer of the current scatter entry before
9127	** interrupting. The following situations may occur:
9128	**
9129	** - The complete scatter entry has been transferred
9130	** without the device having changed phase.
9131	** The chip will then interrupt with the DSP pointing
9132	** to the instruction that follows the MOV.
9133	**
9134	** - A phase mismatch occurs before the MOV finished
9135	** and phase errors are to be handled by the C code.
9136	** The chip will then interrupt with both PAR and MA
9137	** conditions set.
9138	**
9139	** - A phase mismatch occurs before the MOV finished and
9140	** phase errors are to be handled by SCRIPTS (895A or 896).
9141	** The chip will load the DSP with the phase mismatch
9142	** JUMP address and interrupt the host processor.
9143	**
9144	**----------------------------------------------------------
9145	*/
9146
9147	static void ncr_int_par (ncb_p np, u_shortunsigned short sist)
9148	{
9149	u_charunsigned char hsts = INB (HS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr1)))));
9150	u_int32 dsp = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
9151	u_int32 dbc = INL (nc_dbc)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dbc)))));
9152	u_int32 dsa = INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa)))));
9153	u_charunsigned char sbcl = INB (nc_sbcl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbcl)))));
9154	u_charunsigned char cmd = dbc >> 24;
9155	int phase = cmd & 7;
9156	ccb_p cp = ncr_ccb_from_dsa(np, dsa);
9157
9158	printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
9159	ncr_name(np), hsts, dbc, sbcl);
9160
9161	/*
9162	** Check that the chip is connected to the SCSI BUS.
9163	*/
9164	if (!(INB (nc_scntl1)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl1))))) & ISCON0x10)) {
9165	if (!(driver_setup.recovery & 1)) {
9166	ncr_recover_scsi_int(np, HS_FAIL(9\|(0x80)));
9167	return;
9168	}
9169	goto reset_all;
9170	}
9171
9172	/*
9173	** If the nexus is not clearly identified, reset the bus.
9174	** We will try to do better later.
9175	*/
9176	if (!cp)
9177	goto reset_all;
9178
9179	/*
9180	** Check instruction was a MOV, direction was INPUT and
9181	** ATN is asserted.
9182	*/
9183	if ((cmd & 0xc0) \|\| !(phase & 1) \|\| !(sbcl & 0x8))
9184	goto reset_all;
9185
9186	/*
9187	** Keep track of the parity error.
9188	*/
9189	OUTONB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) \| ((1u<<7))))));
9190	cp->xerr_status \|= XE_PARITY_ERR(4);
9191
9192	/*
9193	** Prepare the message to send to the device.
9194	*/
9195	np->msgout[0] = (phase == 7) ? M_PARITY(0x09) : M_ID_ERROR(0x05);
9196
9197	#ifdef SCSI_NCR_INTEGRITY_CHECKING
9198	/*
9199	** Save error message. For integrity check use only.
9200	*/
9201	if (np->check_integrity)
9202	np->check_integ_par = np->msgout[0];
9203	#endif
9204
9205	/*
9206	** If the old phase was DATA IN or DT DATA IN phase,
9207	** we have to deal with the 3 situations described above.
9208	** For other input phases (MSG IN and STATUS), the device
9209	** must resend the whole thing that failed parity checking
9210	** or signal error. So, jumping to dispatcher should be OK.
9211	*/
9212	if ((phase == 1) \|\| (phase == 5)) {
9213	/* Phase mismatch handled by SCRIPTS */
9214	if (dsp == NCB_SCRIPTH_PHYS (np, pm_handle)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> pm_handle))))
9215	OUTL_DSP (dsp)do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dsp ))))) = ((((dsp))))); } while (0);
9216	/* Phase mismatch handled by the C code */
9217	else if (sist & MA0x80)
9218	ncr_int_ma (np);
9219	/* No phase mismatch occurred */
9220	else {
9221	OUTL (nc_temp, dsp)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_temp))))) = (((dsp))));
9222	OUTL_DSP (NCB_SCRIPT_PHYS (np, dispatch))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->dispatch)))))))); } while (0);
9223	}
9224	}
9225	else
9226	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
9227	return;
9228
9229	reset_all:
9230	ncr_start_reset(np);
9231	return;
9232	}
9233
9234	/*==========================================================
9235	**
9236	**
9237	** ncr chip exception handler for phase errors.
9238	**
9239	**
9240	**==========================================================
9241	**
9242	** We have to construct a new transfer descriptor,
9243	** to transfer the rest of the current block.
9244	**
9245	**----------------------------------------------------------
9246	*/
9247
9248	static void ncr_int_ma (ncb_p np)
9249	{
9250	u_int32 dbc;
9251	u_int32 rest;
9252	u_int32 dsp;
9253	u_int32 dsa;
9254	u_int32 nxtdsp;
9255	u_int32 *vdsp;
9256	u_int32 oadr, olen;
9257	u_int32 *tblp;
9258	u_int32 newcmd;
9259	u_intunsigned int delta;
9260	u_charunsigned char cmd;
9261	u_charunsigned char hflags, hflags0;
9262	struct pm_ctx *pm;
9263	ccb_p cp;
9264
9265	dsp = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
9266	dbc = INL (nc_dbc)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dbc)))));
9267	dsa = INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa)))));
9268
9269	cmd = dbc >> 24;
9270	rest = dbc & 0xffffff;
9271	delta = 0;
9272
9273	/*
9274	** locate matching cp.
9275	*/
9276	cp = ncr_ccb_from_dsa(np, dsa);
9277
9278	if (DEBUG_FLAGSncr_debug & DEBUG_PHASE(0x0002))
9279	printk("CCB = %2x %2x %2x %2x %2x %2x\n",
9280	cp->cmd->cmnd[0], cp->cmd->cmnd[1], cp->cmd->cmnd[2],
9281	cp->cmd->cmnd[3], cp->cmd->cmnd[4], cp->cmd->cmnd[5]);
9282
9283	/*
9284	** Donnot take into account dma fifo and various buffers in
9285	** INPUT phase since the chip flushes everything before
9286	** raising the MA interrupt for interrupted INPUT phases.
9287	** For DATA IN phase, we will check for the SWIDE later.
9288	*/
9289	if ((cmd & 7) != 1 && (cmd & 7) != 5) {
9290	u_int32 dfifo;
9291	u_charunsigned char ss0, ss2;
9292
9293	/*
9294	** If C1010, DFBC contains number of bytes in DMA fifo.
9295	** else read DFIFO, CTEST[4-6] using 1 PCI bus ownership.
9296	*/
9297	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
9298	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21))
9299	delta = INL(nc_dfbc)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dfbc))))) & 0xffff;
9300	else {
9301	dfifo = INL(nc_dfifo)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dfifo)))));
9302
9303	/*
9304	** Calculate remaining bytes in DMA fifo.
9305	** C1010 - always large fifo, value in dfbc
9306	** Otherwise, (CTEST5 = dfifo >> 16)
9307	*/
9308	if (dfifo & (DFS0x20 << 16))
9309	delta = ((((dfifo >> 8) & 0x300) \|
9310	(dfifo & 0xff)) - rest) & 0x3ff;
9311	else
9312	delta = ((dfifo & 0xff) - rest) & 0x7f;
9313
9314	/*
9315	** The data in the dma fifo has not been
9316	** transferred to the target -> add the amount
9317	** to the rest and clear the data.
9318	** Check the sstat2 register in case of wide
9319	** transfer.
9320	*/
9321
9322	}
9323
9324	rest += delta;
9325	ss0 = INB (nc_sstat0)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sstat0)))));
9326	if (ss0 & OLF0x20) rest++;
9327	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
9328	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21) && (ss0 & ORF0x40))
9329	rest++;
9330	if (cp && (cp->phys.select.sel_scntl3 & EWS0x08)) {
9331	ss2 = INB (nc_sstat2)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sstat2)))));
9332	if (ss2 & OLF10x20) rest++;
9333	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
9334	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21) && (ss2 & ORF0x40))
9335	rest++;
9336	};
9337
9338	/*
9339	** Clear fifos.
9340	*/
9341	OUTB (nc_ctest3, np->rv_ctest3 \| CLF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_ctest3))))) = (((np-> rv_ctest3 \| 0x04)))); /* dma fifo */
9342	OUTB (nc_stest3, TE\|CSF)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x80\|0x02 )))); /* scsi fifo */
9343	}
9344
9345	/*
9346	** log the information
9347	*/
9348
9349	if (DEBUG_FLAGSncr_debug & (DEBUG_TINY(0x0080)\|DEBUG_PHASE(0x0002)))
9350	printk ("P%x%x RL=%d D=%d ", cmd&7, INB(nc_sbcl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbcl)))))&7,
9351	(unsigned) rest, (unsigned) delta);
9352
9353	/*
9354	** try to find the interrupted script command,
9355	** and the address at which to continue.
9356	*/
9357	vdsp = 0;
9358	nxtdsp = 0;
9359	if (dsp > np->p_script &&
9360	dsp <= np->p_script + sizeof(struct script)) {
9361	vdsp = (u_int32 )((char)np->script0 + (dsp-np->p_script-8));
9362	nxtdsp = dsp;
9363	}
9364	else if (dsp > np->p_scripth &&
9365	dsp <= np->p_scripth + sizeof(struct scripth)) {
9366	vdsp = (u_int32 )((char)np->scripth0 + (dsp-np->p_scripth-8));
9367	nxtdsp = dsp;
9368	}
9369
9370	/*
9371	** log the information
9372	*/
9373	if (DEBUG_FLAGSncr_debug & DEBUG_PHASE(0x0002)) {
9374	printk ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
9375	cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd);
9376	};
9377
9378	if (!vdsp) {
9379	printk ("%s: interrupted SCRIPT address not found.\n",
9380	ncr_name (np));
9381	goto reset_all;
9382	}
9383
9384	if (!cp) {
9385	printk ("%s: SCSI phase error fixup: CCB already dequeued.\n",
9386	ncr_name (np));
9387	goto reset_all;
9388	}
9389
9390	/*
9391	** get old startaddress and old length.
9392	*/
9393
9394	oadr = scr_to_cpu(vdsp[1])(vdsp[1]);
9395
9396	if (cmd & 0x10) { /* Table indirect */
9397	tblp = (u_int32 ) ((char) &cp->phys + oadr);
9398	olen = scr_to_cpu(tblp[0])(tblp[0]);
9399	oadr = scr_to_cpu(tblp[1])(tblp[1]);
9400	} else {
9401	tblp = (u_int32 *) 0;
9402	olen = scr_to_cpu(vdsp[0])(vdsp[0]) & 0xffffff;
9403	};
9404
9405	if (DEBUG_FLAGSncr_debug & DEBUG_PHASE(0x0002)) {
9406	printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
9407	(unsigned) (scr_to_cpu(vdsp[0])(vdsp[0]) >> 24),
9408	tblp,
9409	(unsigned) olen,
9410	(unsigned) oadr);
9411	};
9412
9413	/*
9414	** check cmd against assumed interrupted script command.
9415	** If dt data phase, the MOVE instruction hasn't bit 4 of
9416	** the phase.
9417	*/
9418
9419	if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0])(vdsp[0]) >> 24)) {
9420	PRINT_ADDR(cp->cmd);
9421	printk ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
9422	(unsigned)cmd, (unsigned)scr_to_cpu(vdsp[0])(vdsp[0]) >> 24);
9423
9424	goto reset_all;
9425	};
9426
9427	/*
9428	** if old phase not dataphase, leave here.
9429	** C/D line is low if data.
9430	*/
9431
9432	if (cmd & 0x02) {
9433	PRINT_ADDR(cp->cmd);
9434	printk ("phase change %x-%x %d@%08x resid=%d.\n",
9435	cmd&7, INB(nc_sbcl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sbcl)))))&7, (unsigned)olen,
9436	(unsigned)oadr, (unsigned)rest);
9437	goto unexpected_phase;
9438	};
9439
9440	/*
9441	** Choose the correct PM save area.
9442	**
9443	** Look at the PM_SAVE SCRIPT if you want to understand
9444	** this stuff. The equivalent code is implemented in
9445	** SCRIPTS for the 895A and 896 that are able to handle
9446	** PM from the SCRIPTS processor.
9447	*/
9448
9449	hflags0 = INB (HF_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3)))));
9450	hflags = hflags0;
9451
9452	if (hflags & (HF_IN_PM01u \| HF_IN_PM1(1u<<1) \| HF_DP_SAVED(1u<<3))) {
9453	if (hflags & HF_IN_PM01u)
9454	nxtdsp = scr_to_cpu(cp->phys.pm0.ret)(cp->phys.pm0.ret);
9455	else if (hflags & HF_IN_PM1(1u<<1))
9456	nxtdsp = scr_to_cpu(cp->phys.pm1.ret)(cp->phys.pm1.ret);
9457
9458	if (hflags & HF_DP_SAVED(1u<<3))
9459	hflags ^= HF_ACT_PM(1u<<2);
9460	}
9461
9462	if (!(hflags & HF_ACT_PM(1u<<2))) {
9463	pm = &cp->phys.pm0;
9464	newcmd = NCB_SCRIPT_PHYS(np, pm0_data)(np->p_script + ((size_t) (&((struct script *)0)->pm0_data )));
9465	}
9466	else {
9467	pm = &cp->phys.pm1;
9468	newcmd = NCB_SCRIPT_PHYS(np, pm1_data)(np->p_script + ((size_t) (&((struct script *)0)->pm1_data )));
9469	}
9470
9471	hflags &= ~(HF_IN_PM01u \| HF_IN_PM1(1u<<1) \| HF_DP_SAVED(1u<<3));
9472	if (hflags != hflags0)
9473	OUTB (HF_PRT, hflags)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((hflags))) );
9474
9475	/*
9476	** fillin the phase mismatch context
9477	*/
9478
9479	pm->sg.addr = cpu_to_scr(oadr + olen - rest)(oadr + olen - rest);
9480	pm->sg.size = cpu_to_scr(rest)(rest);
9481	pm->ret = cpu_to_scr(nxtdsp)(nxtdsp);
9482
9483	/*
9484	** If we have a SWIDE,
9485	** - prepare the address to write the SWIDE from SCRIPTS,
9486	** - compute the SCRIPTS address to restart from,
9487	** - move current data pointer context by one byte.
9488	*/
9489	nxtdsp = NCB_SCRIPT_PHYS (np, dispatch)(np->p_script + ((size_t) (&((struct script *)0)->dispatch )));
9490	if ( ((cmd & 7) == 1 \|\| (cmd & 7) == 5)
9491	&& cp && (cp->phys.select.sel_scntl3 & EWS0x08) &&
9492	(INB (nc_scntl2)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scntl2))))) & WSR0x01)) {
9493	u32 tmp;
9494
9495	#ifdef SYM_DEBUG_PM_WITH_WSR
9496	PRINT_ADDR(cp);
9497	printf ("MA interrupt with WSR set - "
9498	"pm->sg.addr=%x - pm->sg.size=%d\n",
9499	pm->sg.addr, pm->sg.size);
9500	#endif
9501	/*
9502	* Set up the table indirect for the MOVE
9503	* of the residual byte and adjust the data
9504	* pointer context.
9505	*/
9506	tmp = scr_to_cpu(pm->sg.addr)(pm->sg.addr);
9507	cp->phys.wresid.addr = cpu_to_scr(tmp)(tmp);
9508	pm->sg.addr = cpu_to_scr(tmp + 1)(tmp + 1);
9509	tmp = scr_to_cpu(pm->sg.size)(pm->sg.size);
9510	cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) \| 1)((tmp&0xff000000) \| 1);
9511	pm->sg.size = cpu_to_scr(tmp - 1)(tmp - 1);
9512
9513	/*
9514	* If only the residual byte is to be moved,
9515	* no PM context is needed.
9516	*/
9517	if ((tmp&0xffffff) == 1)
9518	newcmd = pm->ret;
9519
9520	/*
9521	* Prepare the address of SCRIPTS that will
9522	* move the residual byte to memory.
9523	*/
9524	nxtdsp = NCB_SCRIPTH_PHYS (np, wsr_ma_helper)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> wsr_ma_helper)));
9525	}
9526
9527	if (DEBUG_FLAGSncr_debug & DEBUG_PHASE(0x0002)) {
9528	PRINT_ADDR(cp->cmd);
9529	printk ("PM %x %x %x / %x %x %x.\n",
9530	hflags0, hflags, newcmd,
9531	(unsigned)scr_to_cpu(pm->sg.addr)(pm->sg.addr),
9532	(unsigned)scr_to_cpu(pm->sg.size)(pm->sg.size),
9533	(unsigned)scr_to_cpu(pm->ret)(pm->ret));
9534	}
9535
9536	/*
9537	** Restart the SCRIPTS processor.
9538	*/
9539
9540	OUTL (nc_temp, newcmd)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_temp))))) = (((newcmd))));
9541	OUTL_DSP (nxtdsp)do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dsp ))))) = ((((nxtdsp))))); } while (0);
9542	return;
9543
9544	/*
9545	** Unexpected phase changes that occurs when the current phase
9546	** is not a DATA IN or DATA OUT phase are due to error conditions.
9547	** Such event may only happen when the SCRIPTS is using a
9548	** multibyte SCSI MOVE.
9549	**
9550	** Phase change Some possible cause
9551	**
9552	** COMMAND --> MSG IN SCSI parity error detected by target.
9553	** COMMAND --> STATUS Bad command or refused by target.
9554	** MSG OUT --> MSG IN Message rejected by target.
9555	** MSG OUT --> COMMAND Bogus target that discards extended
9556	** negotiation messages.
9557	**
9558	** The code below does not care of the new phase and so
9559	** trusts the target. Why to annoy it ?
9560	** If the interrupted phase is COMMAND phase, we restart at
9561	** dispatcher.
9562	** If a target does not get all the messages after selection,
9563	** the code assumes blindly that the target discards extended
9564	** messages and clears the negotiation status.
9565	** If the target does not want all our response to negotiation,
9566	** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
9567	** bloat for such a should_not_happen situation).
9568	** In all other situation, we reset the BUS.
9569	** Are these assumptions reasonnable ? (Wait and see ...)
9570	*/
9571	unexpected_phase:
9572	dsp -= 8;
9573	nxtdsp = 0;
9574
9575	switch (cmd & 7) {
9576	case 2: /* COMMAND phase */
9577	nxtdsp = NCB_SCRIPT_PHYS (np, dispatch)(np->p_script + ((size_t) (&((struct script *)0)->dispatch )));
9578	break;
9579	#if 0
9580	case 3: /* STATUS phase */
9581	nxtdsp = NCB_SCRIPT_PHYS (np, dispatch)(np->p_script + ((size_t) (&((struct script *)0)->dispatch )));
9582	break;
9583	#endif
9584	case 6: /* MSG OUT phase */
9585	/*
9586	** If the device may want to use untagged when we want
9587	** tagged, we prepare an IDENTIFY without disc. granted,
9588	** since we will not be able to handle reselect.
9589	** Otherwise, we just don't care.
9590	*/
9591	if (dsp == NCB_SCRIPT_PHYS (np, send_ident)(np->p_script + ((size_t) (&((struct script *)0)->send_ident )))) {
9592	if (cp->tag != NO_TAG(256) && olen - rest <= 3) {
9593	cp->host_statusphys.header.status[1] = HS_BUSY(1);
9594	np->msgout[0] = M_IDENTIFY(0x80) \| cp->lun;
9595	nxtdsp = NCB_SCRIPTH_PHYS (np, ident_break_atn)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> ident_break_atn)));
9596	}
9597	else
9598	nxtdsp = NCB_SCRIPTH_PHYS (np, ident_break)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> ident_break)));
9599	}
9600	else if (dsp == NCB_SCRIPTH_PHYS (np, send_wdtr)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> send_wdtr))) \|\|
9601	dsp == NCB_SCRIPTH_PHYS (np, send_sdtr)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> send_sdtr))) \|\|
9602	dsp == NCB_SCRIPTH_PHYS (np, send_ppr)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> send_ppr)))) {
9603	nxtdsp = NCB_SCRIPTH_PHYS (np, nego_bad_phase)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> nego_bad_phase)));
9604	}
9605	break;
9606	#if 0
9607	case 7: /* MSG IN phase */
9608	nxtdsp = NCB_SCRIPT_PHYS (np, clrack)(np->p_script + ((size_t) (&((struct script *)0)->clrack )));
9609	break;
9610	#endif
9611	}
9612
9613	if (nxtdsp) {
9614	OUTL_DSP (nxtdsp)do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dsp ))))) = ((((nxtdsp))))); } while (0);
9615	return;
9616	}
9617
9618	reset_all:
9619	ncr_start_reset(np);
9620	}
9621
9622	/*==========================================================
9623	**
9624	** ncr chip handler for QUEUE FULL and CHECK CONDITION
9625	**
9626	**==========================================================
9627	**
9628	** On QUEUE FULL status, we set the actual tagged command
9629	** queue depth to the number of disconnected CCBs that is
9630	** hopefully a good value to avoid further QUEUE FULL.
9631	**
9632	** On CHECK CONDITION or COMMAND TERMINATED, we use the
9633	** CCB of the failed command for performing a REQUEST
9634	** SENSE SCSI command.
9635	**
9636	** We do not want to change the order commands will be
9637	** actually queued to the device after we received a
9638	** QUEUE FULL status. We also want to properly deal with
9639	** contingent allegiance condition. For these reasons,
9640	** we remove from the start queue all commands for this
9641	** LUN that haven't been yet queued to the device and
9642	** put them back in the correponding LUN queue, then
9643	** requeue the CCB that failed in front of the LUN queue.
9644	** I just hope this not to be performed too often. :)
9645	**
9646	** If we are using IMMEDIATE ARBITRATION, we clear the
9647	** IARB hint for every commands we encounter in order not
9648	** to be stuck with a won arbitration and no job to queue
9649	** to a device.
9650	**----------------------------------------------------------
9651	*/
9652
9653	static void ncr_sir_to_redo(ncb_p np, int num, ccb_p cp)
9654	{
9655	Scsi_Cmnd *cmd = cp->cmd;
9656	tcb_p tp = &np->target[cp->target];
9657	lcb_p lp = ncr_lp(np, tp, cp->lun)(!cp->lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(cp ->lun)] : 0;
9658	ccb_p cp2;
9659	int busyccbs = 1;
9660	u_int32 startp;
9661	u_charunsigned char s_status = INB (SS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr2)))));
9662	int msglen;
9663	int i, j;
9664
9665
9666	/*
9667	** If the LCB is not yet available, then only
9668	** 1 IO is accepted, so we should have it.
9669	*/
9670	if (!lp)
9671	goto next;
9672	/*
9673	** Remove all CCBs queued to the chip for that LUN and put
9674	** them back in the LUN CCB wait queue.
9675	*/
9676	busyccbs = lp->queuedccbs;
9677	i = (INL (nc_scratcha)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_scratcha))))) - np->p_squeue) / 4;
9678	j = i;
9679	while (i != np->squeueput) {
9680	cp2 = ncr_ccb_from_dsa(np, scr_to_cpu(np->squeue[i])(np->squeue[i]));
9681	assert(cp2){ if (!(cp2)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "cp2", "../linux/src/drivers/scsi/sym53c8xx.c", 9681); } };
9682	#ifdef SCSI_NCR_IARB_SUPPORT
9683	/* IARB hints may not be relevant any more. Forget them. */
9684	cp2->host_flagsphys.header.status[3] &= ~HF_HINT_IARB;
9685	#endif
9686	if (cp2 && cp2->target == cp->target && cp2->lun == cp->lun) {
9687	xpt_remque(&cp2->link_ccbq)__xpt_que_del((&cp2->link_ccbq)->blink, (&cp2-> link_ccbq)->flink);
9688	xpt_insque_head(&cp2->link_ccbq, &lp->wait_ccbq)__xpt_que_add(&cp2->link_ccbq, &lp->wait_ccbq, ( &lp->wait_ccbq)->flink);
9689	--lp->queuedccbs;
9690	cp2->queued = 0;
9691	}
9692	else {
9693	if (i != j)
9694	np->squeue[j] = np->squeue[i];
9695	if ((j += 2) >= MAX_START((8(8) + 2(16)) + 4)*2) j = 0;
9696	}
9697	if ((i += 2) >= MAX_START((8(8) + 2(16)) + 4)*2) i = 0;
9698	}
9699	if (i != j) /* Copy back the idle task if needed */
9700	np->squeue[j] = np->squeue[i];
9701	np->squeueput = j; /* Update our current start queue pointer */
9702
9703	/*
9704	** Requeue the interrupted CCB in front of the
9705	** LUN CCB wait queue to preserve ordering.
9706	*/
9707	xpt_remque(&cp->link_ccbq)__xpt_que_del((&cp->link_ccbq)->blink, (&cp-> link_ccbq)->flink);
9708	xpt_insque_head(&cp->link_ccbq, &lp->wait_ccbq)__xpt_que_add(&cp->link_ccbq, &lp->wait_ccbq, ( &lp->wait_ccbq)->flink);
9709	--lp->queuedccbs;
9710	cp->queued = 0;
9711
9712	next:
9713
9714	#ifdef SCSI_NCR_IARB_SUPPORT
9715	/* IARB hint may not be relevant any more. Forget it. */
9716	cp->host_flagsphys.header.status[3] &= ~HF_HINT_IARB;
9717	if (np->last_cp)
9718	np->last_cp = 0;
9719	#endif
9720
9721	/*
9722	** Now we can restart the SCRIPTS processor safely.
9723	*/
9724	OUTL_DSP (NCB_SCRIPT_PHYS (np, start))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->start)))))))); } while (0);
9725
9726	switch(s_status) {
9727	default:
9728	case S_BUSY(0x08):
9729	ncr_complete(np, cp);
9730	break;
9731	case S_QUEUE_FULL(0x28):
9732	if (!lp \|\| !lp->queuedccbs) {
9733	ncr_complete(np, cp);
9734	break;
9735	}
9736	if (bootverbose(np->verbose) >= 1) {
9737	PRINT_ADDR(cmd);
9738	printk ("QUEUE FULL! %d busy, %d disconnected CCBs\n",
9739	busyccbs, lp->queuedccbs);
9740	}
9741	/*
9742	** Decrease number of tags to the number of
9743	** disconnected commands.
9744	*/
9745	if (lp->queuedccbs < lp->numtags) {
9746	lp->numtags = lp->queuedccbs;
9747	lp->num_good = 0;
9748	ncr_setup_tags (np, cp->target, cp->lun);
9749	}
9750	/*
9751	** Repair the offending CCB.
9752	*/
9753	cp->phys.header.savep = cp->startp;
9754	cp->phys.header.lastp = cp->lastp0;
9755	cp->host_statusphys.header.status[1] = HS_BUSY(1);
9756	cp->scsi_statusphys.header.status[2] = S_ILLEGAL(0xff);
9757	cp->xerr_status = 0;
9758	cp->extra_bytes = 0;
9759	cp->host_flagsphys.header.status[3] &= (HF_PM_TO_C(1u<<6)\|HF_DATA_IN(1u<<5));
9760
9761	break;
9762
9763	case S_TERMINATED(0x20):
9764	case S_CHECK_COND(0x02):
9765	/*
9766	** If we were requesting sense, give up.
9767	*/
9768	if (cp->host_flagsphys.header.status[3] & HF_AUTO_SENSE(1u<<4)) {
9769	ncr_complete(np, cp);
9770	break;
9771	}
9772
9773	/*
9774	** Save SCSI status and extended error.
9775	** Compute the data residual now.
9776	*/
9777	cp->sv_scsi_status = cp->scsi_statusphys.header.status[2];
9778	cp->sv_xerr_status = cp->xerr_status;
9779	cp->resid = ncr_compute_residual(np, cp);
9780
9781	/*
9782	** Device returned CHECK CONDITION status.
9783	** Prepare all needed data strutures for getting
9784	** sense data.
9785	*/
9786
9787	/*
9788	** identify message
9789	*/
9790	cp->scsi_smsg2[0] = M_IDENTIFY(0x80) \| cp->lun;
9791	msglen = 1;
9792
9793	/*
9794	** If we are currently using anything different from
9795	** async. 8 bit data transfers with that target,
9796	** start a negotiation, since the device may want
9797	** to report us a UNIT ATTENTION condition due to
9798	** a cause we currently ignore, and we donnot want
9799	** to be stuck with WIDE and/or SYNC data transfer.
9800	**
9801	** cp->nego_status is filled by ncr_prepare_nego().
9802	**
9803	** Do NOT negotiate if performing integrity check
9804	** or if integrity check has completed, all check
9805	** conditions will have been cleared.
9806	*/
9807
9808	#ifdef SCSI_NCR_INTEGRITY_CHECKING
9809	if (DEBUG_FLAGSncr_debug & DEBUG_IC(0x0800)) {
9810	printk("%s: ncr_sir_to_redo: ic_done %2X, in_progress %2X\n",
9811	ncr_name(np), tp->ic_done, cp->cmd->ic_in_progress);
9812	}
9813
9814	/*
9815	** If parity error during integrity check,
9816	** set the target width to narrow. Otherwise,
9817	** do not negotiate on a request sense.
9818	*/
9819	if ( np->check_integ_par && np->check_integrity
9820	&& cp->cmd->ic_in_progress ) {
9821	cp->nego_status = 0;
9822	msglen +=
9823	ncr_ic_nego (np, cp, cmd ,&cp->scsi_smsg2[msglen]);
9824	}
9825
9826	if (!np->check_integrity \|\|
9827	(np->check_integrity &&
9828	(!cp->cmd->ic_in_progress && !tp->ic_done)) ) {
9829	ncr_negotiate(np, tp);
9830	cp->nego_status = 0;
9831	{
9832	u_charunsigned char sync_offset;
9833	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
9834	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21))
9835	sync_offset = tp->sval & 0x3f;
9836	else
9837	sync_offset = tp->sval & 0x1f;
9838
9839	if ((tp->wval & EWS0x08) \|\| sync_offset)
9840	msglen +=
9841	ncr_prepare_nego (np, cp, &cp->scsi_smsg2[msglen]);
9842	}
9843
9844	}
9845	#else
9846	ncr_negotiate(np, tp);
9847	cp->nego_status = 0;
9848	if ((tp->wval & EWS0x08) \|\| (tp->sval & 0x1f))
9849	msglen +=
9850	ncr_prepare_nego (np, cp, &cp->scsi_smsg2[msglen]);
9851	#endif /* SCSI_NCR_INTEGRITY_CHECKING */
9852
9853	/*
9854	** Message table indirect structure.
9855	*/
9856	cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg2))((cp->p_ccb + ((size_t) (&((struct ccb *)0)->scsi_smsg2 ))));
9857	cp->phys.smsg.size = cpu_to_scr(msglen)(msglen);
9858
9859	/*
9860	** sense command
9861	*/
9862	cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, sensecmd))((cp->p_ccb + ((size_t) (&((struct ccb *)0)->sensecmd ))));
9863	cp->phys.cmd.size = cpu_to_scr(6)(6);
9864
9865	/*
9866	** patch requested size into sense command
9867	*/
9868	cp->sensecmd[0] = 0x03;
9869	cp->sensecmd[1] = cp->lun << 5;
9870	cp->sensecmd[4] = sizeof(cp->sense_buf);
9871
9872	/*
9873	** sense data
9874	*/
9875	bzero(cp->sense_buf, sizeof(cp->sense_buf))(__builtin_constant_p(0) ? (__builtin_constant_p(((sizeof(cp-> sense_buf)))) ? __constant_c_and_count_memset((((cp->sense_buf ))),((0x01010101UL(unsigned char)(0))),(((sizeof(cp->sense_buf ))))) : __constant_c_memset((((cp->sense_buf))),((0x01010101UL (unsigned char)(0))),(((sizeof(cp->sense_buf)))))) : (__builtin_constant_p (((sizeof(cp->sense_buf)))) ? __memset_generic(((((cp-> sense_buf)))),(((0))),((((sizeof(cp->sense_buf)))))) : __memset_generic ((((cp->sense_buf))),((0)),(((sizeof(cp->sense_buf))))) ));
9876	cp->phys.sense.addr = cpu_to_scr(CCB_PHYS(cp,sense_buf[0]))((cp->p_ccb + ((size_t) (&((struct ccb *)0)->sense_buf [0]))));
9877	cp->phys.sense.size = cpu_to_scr(sizeof(cp->sense_buf))(sizeof(cp->sense_buf));
9878
9879	/*
9880	** requeue the command.
9881	*/
9882	startp = NCB_SCRIPTH_PHYS (np, sdata_in)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> sdata_in)));
9883
9884	cp->phys.header.savep = cpu_to_scr(startp)(startp);
9885	cp->phys.header.goalp = cpu_to_scr(startp + 16)(startp + 16);
9886	cp->phys.header.lastp = cpu_to_scr(startp)(startp);
9887	cp->phys.header.wgoalp = cpu_to_scr(startp + 16)(startp + 16);
9888	cp->phys.header.wlastp = cpu_to_scr(startp)(startp);
9889
9890	cp->host_statusphys.header.status[1] = cp->nego_status ? HS_NEGOTIATE(2) : HS_BUSY(1);
9891	cp->scsi_statusphys.header.status[2] = S_ILLEGAL(0xff);
9892	cp->host_flagsphys.header.status[3] = (HF_AUTO_SENSE(1u<<4)\|HF_DATA_IN(1u<<5));
9893
9894	cp->phys.header.go.start =
9895	cpu_to_scr(NCB_SCRIPT_PHYS (np, select))((np->p_script + ((size_t) (&((struct script *)0)-> select))));
9896
9897	/*
9898	** If lp not yet allocated, requeue the command.
9899	*/
9900	if (!lp)
9901	ncr_put_start_queue(np, cp);
9902	break;
9903	}
9904
9905	/*
9906	** requeue awaiting scsi commands for this lun.
9907	*/
9908	if (lp)
9909	ncr_start_next_ccb(np, lp, 1);
9910
9911	return;
9912	}
9913
9914	/*----------------------------------------------------------
9915	**
9916	** After a device has accepted some management message
9917	** as BUS DEVICE RESET, ABORT TASK, etc ..., or when
9918	** a device signals a UNIT ATTENTION condition, some
9919	** tasks are thrown away by the device. We are required
9920	** to reflect that on our tasks list since the device
9921	** will never complete these tasks.
9922	**
9923	** This function completes all disconnected CCBs for a
9924	** given target that matches the following criteria:
9925	** - lun=-1 means any logical UNIT otherwise a given one.
9926	** - task=-1 means any task, otherwise a given one.
9927	**----------------------------------------------------------
9928	*/
9929	static int ncr_clear_tasks(ncb_p np, u_charunsigned char hsts,
9930	int target, int lun, int task)
9931	{
9932	int i = 0;
9933	ccb_p cp;
9934
9935	for (cp = np->ccbc; cp; cp = cp->link_ccb) {
9936	if (cp->host_statusphys.header.status[1] != HS_DISCONNECT(3))
9937	continue;
9938	if (cp->target != target)
9939	continue;
9940	if (lun != -1 && cp->lun != lun)
9941	continue;
9942	if (task != -1 && cp->tag != NO_TAG(256) && cp->scsi_smsg[2] != task)
9943	continue;
9944	cp->host_statusphys.header.status[1] = hsts;
9945	cp->scsi_statusphys.header.status[2] = S_ILLEGAL(0xff);
9946	ncr_complete(np, cp);
9947	++i;
9948	}
9949	return i;
9950	}
9951
9952	/*==========================================================
9953	**
9954	** ncr chip handler for TASKS recovery.
9955	**
9956	**==========================================================
9957	**
9958	** We cannot safely abort a command, while the SCRIPTS
9959	** processor is running, since we just would be in race
9960	** with it.
9961	**
9962	** As long as we have tasks to abort, we keep the SEM
9963	** bit set in the ISTAT. When this bit is set, the
9964	** SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED)
9965	** each time it enters the scheduler.
9966	**
9967	** If we have to reset a target, clear tasks of a unit,
9968	** or to perform the abort of a disconnected job, we
9969	** restart the SCRIPTS for selecting the target. Once
9970	** selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED).
9971	** If it loses arbitration, the SCRIPTS will interrupt again
9972	** the next time it will enter its scheduler, and so on ...
9973	**
9974	** On SIR_TARGET_SELECTED, we scan for the more
9975	** appropriate thing to do:
9976	**
9977	** - If nothing, we just sent a M_ABORT message to the
9978	** target to get rid of the useless SCSI bus ownership.
9979	** According to the specs, no tasks shall be affected.
9980	** - If the target is to be reset, we send it a M_RESET
9981	** message.
9982	** - If a logical UNIT is to be cleared , we send the
9983	** IDENTIFY(lun) + M_ABORT.
9984	** - If an untagged task is to be aborted, we send the
9985	** IDENTIFY(lun) + M_ABORT.
9986	** - If a tagged task is to be aborted, we send the
9987	** IDENTIFY(lun) + task attributes + M_ABORT_TAG.
9988	**
9989	** Once our 'kiss of death' :) message has been accepted
9990	** by the target, the SCRIPTS interrupts again
9991	** (SIR_ABORT_SENT). On this interrupt, we complete
9992	** all the CCBs that should have been aborted by the
9993	** target according to our message.
9994	**
9995	**----------------------------------------------------------
9996	*/
9997	static void ncr_sir_task_recovery(ncb_p np, int num)
9998	{
9999	ccb_p cp;
10000	tcb_p tp;
10001	int target=-1, lun=-1, task;
10002	int i, k;
10003	u_charunsigned char *p;
10004
10005	switch(num) {
10006	/*
10007	** The SCRIPTS processor stopped before starting
10008	** the next command in order to allow us to perform
10009	** some task recovery.
10010	*/
10011	case SIR_SCRIPT_STOPPED(7):
10012
10013	/*
10014	** Do we have any target to reset or unit to clear ?
10015	*/
10016	for (i = 0 ; i < MAX_TARGET((16)) ; i++) {
10017	tp = &np->target[i];
10018	if (tp->to_reset \|\| (tp->l0p && tp->l0p->to_clear)) {
10019	target = i;
10020	break;
10021	}
10022	if (!tp->lmp)
10023	continue;
10024	for (k = 1 ; k < MAX_LUN64 ; k++) {
10025	if (tp->lmp[k] && tp->lmp[k]->to_clear) {
10026	target = i;
10027	break;
10028	}
10029	}
10030	if (target != -1)
10031	break;
10032	}
10033
10034	/*
10035	** If not, look at the CCB list for any
10036	** disconnected CCB to be aborted.
10037	*/
10038	if (target == -1) {
10039	for (cp = np->ccbc; cp; cp = cp->link_ccb) {
10040	if (cp->host_statusphys.header.status[1] != HS_DISCONNECT(3))
10041	continue;
10042	if (cp->to_abort) {
10043	target = cp->target;
10044	break;
10045	}
10046	}
10047	}
10048
10049	/*
10050	** If some target is to be selected,
10051	** prepare and start the selection.
10052	*/
10053	if (target != -1) {
10054	tp = &np->target[target];
10055	np->abrt_sel.sel_id = target;
10056	np->abrt_sel.sel_scntl3 = tp->wval;
10057	np->abrt_sel.sel_sxfer = tp->sval;
10058	np->abrt_sel.sel_scntl4 = tp->uval;
10059	OUTL(nc_dsa, np->p_ncb)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsa))))) = (((np->p_ncb ))));
10060	OUTL_DSP (NCB_SCRIPTH_PHYS (np, sel_for_abort))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->sel_for_abort)))))))); } while (0);
10061	return;
10062	}
10063
10064	/*
10065	** Nothing is to be selected, so we donnot need
10066	** to synchronize with the SCRIPTS anymore.
10067	** Remove the SEM flag from the ISTAT.
10068	*/
10069	np->istat_sem = 0;
10070	OUTB (nc_istat, SIGP)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_istat))))) = (((0x20))));
10071
10072	/*
10073	** Now look at CCBs to abort that haven't started yet.
10074	** Remove all those CCBs from the start queue and
10075	** complete them with appropriate status.
10076	** Btw, the SCRIPTS processor is still stopped, so
10077	** we are not in race.
10078	*/
10079	for (cp = np->ccbc; cp; cp = cp->link_ccb) {
10080	if (cp->host_statusphys.header.status[1] != HS_BUSY(1) &&
10081	cp->host_statusphys.header.status[1] != HS_NEGOTIATE(2))
10082	continue;
10083	if (!cp->to_abort)
10084	continue;
10085	#ifdef SCSI_NCR_IARB_SUPPORT
10086	/*
10087	** If we are using IMMEDIATE ARBITRATION, we donnot
10088	** want to cancel the last queued CCB, since the
10089	** SCRIPTS may have anticipated the selection.
10090	*/
10091	if (cp == np->last_cp) {
10092	cp->to_abort = 0;
10093	continue;
10094	}
10095	#endif
10096	/*
10097	** Compute index of next position in the start
10098	** queue the SCRIPTS will schedule.
10099	*/
10100	i = (INL (nc_scratcha)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_scratcha))))) - np->p_squeue) / 4;
10101
10102	/*
10103	** Remove the job from the start queue.
10104	*/
10105	k = -1;
10106	while (1) {
10107	if (i == np->squeueput)
10108	break;
10109	if (k == -1) { /* Not found yet */
10110	if (cp == ncr_ccb_from_dsa(np,
10111	scr_to_cpu(np->squeue[i])(np->squeue[i])))
10112	k = i; /* Found */
10113	}
10114	else {
10115	/*
10116	** Once found, we have to move
10117	** back all jobs by 1 position.
10118	*/
10119	np->squeue[k] = np->squeue[i];
10120	k += 2;
10121	if (k >= MAX_START((8(8) + 2(16)) + 4)*2)
10122	k = 0;
10123	}
10124
10125	i += 2;
10126	if (i >= MAX_START((8(8) + 2(16)) + 4)*2)
10127	i = 0;
10128	}
10129	if (k != -1) {
10130	np->squeue[k] = np->squeue[i]; /* Idle task */
10131	np->squeueput = k; /* Start queue pointer */
10132	}
10133	cp->host_statusphys.header.status[1] = HS_ABORTED(7\|(0x80));
10134	cp->scsi_statusphys.header.status[2] = S_ILLEGAL(0xff);
10135	ncr_complete(np, cp);
10136	}
10137	break;
10138	/*
10139	** The SCRIPTS processor has selected a target
10140	** we may have some manual recovery to perform for.
10141	*/
10142	case SIR_TARGET_SELECTED(14):
10143	target = (INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0xf);
10144	tp = &np->target[target];
10145
10146	np->abrt_tbl.addr = vtobus(np->abrt_msg)virt_to_phys(np->abrt_msg);
10147
10148	/*
10149	** If the target is to be reset, prepare a
10150	** M_RESET message and clear the to_reset flag
10151	** since we donnot expect this operation to fail.
10152	*/
10153	if (tp->to_reset) {
10154	np->abrt_msg[0] = M_RESET(0x0c);
10155	np->abrt_tbl.size = 1;
10156	tp->to_reset = 0;
10157	break;
10158	}
10159
10160	/*
10161	** Otherwise, look for some logical unit to be cleared.
10162	*/
10163	if (tp->l0p && tp->l0p->to_clear)
10164	lun = 0;
10165	else if (tp->lmp) {
10166	for (k = 1 ; k < MAX_LUN64 ; k++) {
10167	if (tp->lmp[k] && tp->lmp[k]->to_clear) {
10168	lun = k;
10169	break;
10170	}
10171	}
10172	}
10173
10174	/*
10175	** If a logical unit is to be cleared, prepare
10176	** an IDENTIFY(lun) + ABORT MESSAGE.
10177	*/
10178	if (lun != -1) {
10179	lcb_p lp = ncr_lp(np, tp, lun)(!lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(lun)] : 0;
10180	lp->to_clear = 0; /* We donnot expect to fail here */
10181	np->abrt_msg[0] = M_IDENTIFY(0x80) \| lun;
10182	np->abrt_msg[1] = M_ABORT(0x06);
10183	np->abrt_tbl.size = 2;
10184	break;
10185	}
10186
10187	/*
10188	** Otherwise, look for some disconnected job to
10189	** abort for this target.
10190	*/
10191	for (cp = np->ccbc; cp; cp = cp->link_ccb) {
10192	if (cp->host_statusphys.header.status[1] != HS_DISCONNECT(3))
10193	continue;
10194	if (cp->target != target)
10195	continue;
10196	if (cp->to_abort)
10197	break;
10198	}
10199
10200	/*
10201	** If we have none, probably since the device has
10202	** completed the command before we won abitration,
10203	** send a M_ABORT message without IDENTIFY.
10204	** According to the specs, the device must just
10205	** disconnect the BUS and not abort any task.
10206	*/
10207	if (!cp) {
10208	np->abrt_msg[0] = M_ABORT(0x06);
10209	np->abrt_tbl.size = 1;
10210	break;
10211	}
10212
10213	/*
10214	** We have some task to abort.
10215	** Set the IDENTIFY(lun)
10216	*/
10217	np->abrt_msg[0] = M_IDENTIFY(0x80) \| cp->lun;
10218
10219	/*
10220	** If we want to abort an untagged command, we
10221	** will send a IDENTIFY + M_ABORT.
10222	** Otherwise (tagged command), we will send
10223	** a IDENTITFY + task attributes + ABORT TAG.
10224	*/
10225	if (cp->tag == NO_TAG(256)) {
10226	np->abrt_msg[1] = M_ABORT(0x06);
10227	np->abrt_tbl.size = 2;
10228	}
10229	else {
10230	np->abrt_msg[1] = cp->scsi_smsg[1];
10231	np->abrt_msg[2] = cp->scsi_smsg[2];
10232	np->abrt_msg[3] = M_ABORT_TAG(0x0d);
10233	np->abrt_tbl.size = 4;
10234	}
10235	cp->to_abort = 0; /* We donnot expect to fail here */
10236	break;
10237
10238	/*
10239	** The target has accepted our message and switched
10240	** to BUS FREE phase as we expected.
10241	*/
10242	case SIR_ABORT_SENT(17):
10243	target = (INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0xf);
10244	tp = &np->target[target];
10245
10246	/*
10247	** If we didn't abort anything, leave here.
10248	*/
10249	if (np->abrt_msg[0] == M_ABORT(0x06))
10250	break;
10251
10252	/*
10253	** If we sent a M_RESET, then a hardware reset has
10254	** been performed by the target.
10255	** - Reset everything to async 8 bit
10256	** - Tell ourself to negotiate next time :-)
10257	** - Prepare to clear all disconnected CCBs for
10258	** this target from our task list (lun=task=-1)
10259	*/
10260	lun = -1;
10261	task = -1;
10262	if (np->abrt_msg[0] == M_RESET(0x0c)) {
10263	tp->sval = 0;
10264	tp->wval = np->rv_scntl3;
10265	tp->uval = np->rv_scntl4;
10266	ncr_set_sync_wide_status(np, target);
10267	ncr_negotiate(np, tp);
10268	}
10269
10270	/*
10271	** Otherwise, check for the LUN and TASK(s)
10272	** concerned by the cancelation.
10273	** If it is not ABORT_TAG then it is CLEAR_QUEUE
10274	** or an ABORT message :-)
10275	*/
10276	else {
10277	lun = np->abrt_msg[0] & 0x3f;
10278	if (np->abrt_msg[1] == M_ABORT_TAG(0x0d))
10279	task = np->abrt_msg[2];
10280	}
10281
10282	/*
10283	** Complete all the CCBs the device should have
10284	** aborted due to our 'kiss of death' message.
10285	*/
10286	(void) ncr_clear_tasks(np, HS_ABORTED(7\|(0x80)), target, lun, task);
10287	break;
10288
10289	/*
10290	** We have performed a auto-sense that succeeded.
10291	** If the device reports a UNIT ATTENTION condition
10292	** due to a RESET condition, we must complete all
10293	** disconnect CCBs for this unit since the device
10294	** shall have thrown them away.
10295	** Since I haven't time to guess what the specs are
10296	** expecting for other UNIT ATTENTION conditions, I
10297	** decided to only care about RESET conditions. :)
10298	*/
10299	case SIR_AUTO_SENSE_DONE(20):
10300	cp = ncr_ccb_from_dsa(np, INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa))))));
10301	if (!cp)
10302	break;
10303	memcpy(cp->cmd->sense_buffer, cp->sense_buf,(__builtin_constant_p(sizeof(cp->cmd->sense_buffer)) ? __constant_memcpy ((cp->cmd->sense_buffer),(cp->sense_buf),(sizeof(cp-> cmd->sense_buffer))) : __memcpy((cp->cmd->sense_buffer ),(cp->sense_buf),(sizeof(cp->cmd->sense_buffer))))
10304	sizeof(cp->cmd->sense_buffer))(__builtin_constant_p(sizeof(cp->cmd->sense_buffer)) ? __constant_memcpy ((cp->cmd->sense_buffer),(cp->sense_buf),(sizeof(cp-> cmd->sense_buffer))) : __memcpy((cp->cmd->sense_buffer ),(cp->sense_buf),(sizeof(cp->cmd->sense_buffer))));
10305	p = &cp->cmd->sense_buffer[0];
10306
10307	if (p[0] != 0x70 \|\| p[2] != 0x6 \|\| p[12] != 0x29)
10308	break;
10309	#if 0
10310	(void) ncr_clear_tasks(np, HS_RESET(6\|(0x80)), cp->target, cp->lun, -1);
10311	#endif
10312	break;
10313	}
10314
10315	/*
10316	** Print to the log the message we intend to send.
10317	*/
10318	if (num == SIR_TARGET_SELECTED(14)) {
10319	PRINT_TARGET(np, target);
10320	ncr_printl_hex("control msgout:", np->abrt_msg,
10321	np->abrt_tbl.size);
10322	np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size)(np->abrt_tbl.size);
10323	}
10324
10325	/*
10326	** Let the SCRIPTS processor continue.
10327	*/
10328	OUTONB_STD ()do { do { ; } while(0); (((volatile unsigned char ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dcntl ))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dcntl))))) \| ( (0x04\|0x01)))))); } while (0);
10329	}
10330
10331
10332	/*==========================================================
10333	**
10334	** G�rard's alchemy:) that deals with with the data
10335	** pointer for both MDP and the residual calculation.
10336	**
10337	**==========================================================
10338	**
10339	** I didn't want to bloat the code by more than 200
10340	** lignes for the handling of both MDP and the residual.
10341	** This has been achieved by using a data pointer
10342	** representation consisting in an index in the data
10343	** array (dp_sg) and a negative offset (dp_ofs) that
10344	** have the following meaning:
10345	**
10346	** - dp_sg = MAX_SCATTER
10347	** we are at the end of the data script.
10348	** - dp_sg < MAX_SCATTER
10349	** dp_sg points to the next entry of the scatter array
10350	** we want to transfer.
10351	** - dp_ofs < 0
10352	** dp_ofs represents the residual of bytes of the
10353	** previous entry scatter entry we will send first.
10354	** - dp_ofs = 0
10355	** no residual to send first.
10356	**
10357	** The function ncr_evaluate_dp() accepts an arbitray
10358	** offset (basically from the MDP message) and returns
10359	** the corresponding values of dp_sg and dp_ofs.
10360	**
10361	**----------------------------------------------------------
10362	*/
10363
10364	static int ncr_evaluate_dp(ncb_p np, ccb_p cp, u_int32 scr, int *ofs)
10365	{
10366	u_int32 dp_scr;
10367	int dp_ofs, dp_sg, dp_sgmin;
10368	int tmp;
10369	struct pm_ctx *pm;
10370
10371	/*
10372	** Compute the resulted data pointer in term of a script
10373	** address within some DATA script and a signed byte offset.
10374	*/
10375	dp_scr = scr;
10376	dp_ofs = *ofs;
10377	if (dp_scr == NCB_SCRIPT_PHYS (np, pm0_data)(np->p_script + ((size_t) (&((struct script *)0)->pm0_data ))))
10378	pm = &cp->phys.pm0;
10379	else if (dp_scr == NCB_SCRIPT_PHYS (np, pm1_data)(np->p_script + ((size_t) (&((struct script *)0)->pm1_data ))))
10380	pm = &cp->phys.pm1;
10381	else
10382	pm = 0;
10383
10384	if (pm) {
10385	dp_scr = scr_to_cpu(pm->ret)(pm->ret);
10386	dp_ofs -= scr_to_cpu(pm->sg.size)(pm->sg.size);
10387	}
10388
10389	/*
10390	** Deduce the index of the sg entry.
10391	** Keep track of the index of the first valid entry.
10392	** If result is dp_sg = MAX_SCATTER, then we are at the
10393	** end of the data and vice-versa.
10394	*/
10395	tmp = scr_to_cpu(cp->phys.header.goalp)(cp->phys.header.goalp);
10396	dp_sg = MAX_SCATTER((127));
10397	if (dp_scr != tmp)
10398	dp_sg -= (tmp - 8 - (int)dp_scr) / (SCR_SG_SIZE(2)*4);
10399	dp_sgmin = MAX_SCATTER((127)) - cp->segments;
10400
10401	/*
10402	** Move to the sg entry the data pointer belongs to.
10403	**
10404	** If we are inside the data area, we expect result to be:
10405	**
10406	** Either,
10407	** dp_ofs = 0 and dp_sg is the index of the sg entry
10408	** the data pointer belongs to (or the end of the data)
10409	** Or,
10410	** dp_ofs < 0 and dp_sg is the index of the sg entry
10411	** the data pointer belongs to + 1.
10412	*/
10413	if (dp_ofs < 0) {
10414	int n;
10415	while (dp_sg > dp_sgmin) {
10416	--dp_sg;
10417	tmp = scr_to_cpu(cp->phys.data[dp_sg].size)(cp->phys.data[dp_sg].size);
10418	n = dp_ofs + (tmp & 0xffffff);
10419	if (n > 0) {
10420	++dp_sg;
10421	break;
10422	}
10423	dp_ofs = n;
10424	}
10425	}
10426	else if (dp_ofs > 0) {
10427	while (dp_sg < MAX_SCATTER((127))) {
10428	tmp = scr_to_cpu(cp->phys.data[dp_sg].size)(cp->phys.data[dp_sg].size);
10429	dp_ofs -= (tmp & 0xffffff);
10430	++dp_sg;
10431	if (dp_ofs <= 0)
10432	break;
10433	}
10434	}
10435
10436	/*
10437	** Make sure the data pointer is inside the data area.
10438	** If not, return some error.
10439	*/
10440	if (dp_sg < dp_sgmin \|\| (dp_sg == dp_sgmin && dp_ofs < 0))
10441	goto out_err;
10442	else if (dp_sg > MAX_SCATTER((127)) \|\| (dp_sg == MAX_SCATTER((127)) && dp_ofs > 0))
10443	goto out_err;
10444
10445	/*
10446	** Save the extreme pointer if needed.
10447	*/
10448	if (dp_sg > cp->ext_sg \|\|
10449	(dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) {
10450	cp->ext_sg = dp_sg;
10451	cp->ext_ofs = dp_ofs;
10452	}
10453
10454	/*
10455	** Return data.
10456	*/
10457	*ofs = dp_ofs;
10458	return dp_sg;
10459
10460	out_err:
10461	return -1;
10462	}
10463
10464	/*==========================================================
10465	**
10466	** ncr chip handler for MODIFY DATA POINTER MESSAGE
10467	**
10468	**==========================================================
10469	**
10470	** We also call this function on IGNORE WIDE RESIDUE
10471	** messages that do not match a SWIDE full condition.
10472	** Btw, we assume in that situation that such a message
10473	** is equivalent to a MODIFY DATA POINTER (offset=-1).
10474	**
10475	**----------------------------------------------------------
10476	*/
10477
10478	static void ncr_modify_dp(ncb_p np, tcb_p tp, ccb_p cp, int ofs)
10479	{
10480	int dp_ofs = ofs;
10481	u_int32 dp_scr = INL (nc_temp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_temp)))));
10482	u_int32 dp_ret;
10483	u_int32 tmp;
10484	u_charunsigned char hflags;
10485	int dp_sg;
10486	struct pm_ctx *pm;
10487
10488	/*
10489	** Not supported for auto_sense;
10490	*/
10491	if (cp->host_flagsphys.header.status[3] & HF_AUTO_SENSE(1u<<4))
10492	goto out_reject;
10493
10494	/*
10495	** Apply our alchemy:) (see comments in ncr_evaluate_dp()),
10496	** to the resulted data pointer.
10497	*/
10498	dp_sg = ncr_evaluate_dp(np, cp, dp_scr, &dp_ofs);
10499	if (dp_sg < 0)
10500	goto out_reject;
10501
10502	/*
10503	** And our alchemy:) allows to easily calculate the data
10504	** script address we want to return for the next data phase.
10505	*/
10506	dp_ret = cpu_to_scr(cp->phys.header.goalp)(cp->phys.header.goalp);
10507	dp_ret = dp_ret - 8 - (MAX_SCATTER((127)) - dp_sg) * (SCR_SG_SIZE(2)*4);
10508
10509	/*
10510	** If offset / scatter entry is zero we donnot need
10511	** a context for the new current data pointer.
10512	*/
10513	if (dp_ofs == 0) {
10514	dp_scr = dp_ret;
10515	goto out_ok;
10516	}
10517
10518	/*
10519	** Get a context for the new current data pointer.
10520	*/
10521	hflags = INB (HF_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3)))));
10522
10523	if (hflags & HF_DP_SAVED(1u<<3))
10524	hflags ^= HF_ACT_PM(1u<<2);
10525
10526	if (!(hflags & HF_ACT_PM(1u<<2))) {
10527	pm = &cp->phys.pm0;
10528	dp_scr = NCB_SCRIPT_PHYS (np, pm0_data)(np->p_script + ((size_t) (&((struct script *)0)->pm0_data )));
10529	}
10530	else {
10531	pm = &cp->phys.pm1;
10532	dp_scr = NCB_SCRIPT_PHYS (np, pm1_data)(np->p_script + ((size_t) (&((struct script *)0)->pm1_data )));
10533	}
10534
10535	hflags &= ~(HF_DP_SAVED(1u<<3));
10536
10537	OUTB (HF_PRT, hflags)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((hflags))) );
10538
10539	/*
10540	** Set up the new current data pointer.
10541	** ofs < 0 there, and for the next data phase, we
10542	** want to transfer part of the data of the sg entry
10543	** corresponding to index dp_sg-1 prior to returning
10544	** to the main data script.
10545	*/
10546	pm->ret = cpu_to_scr(dp_ret)(dp_ret);
10547	tmp = scr_to_cpu(cp->phys.data[dp_sg-1].addr)(cp->phys.data[dp_sg-1].addr);
10548	tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size)(cp->phys.data[dp_sg-1].size) + dp_ofs;
10549	pm->sg.addr = cpu_to_scr(tmp)(tmp);
10550	pm->sg.size = cpu_to_scr(-dp_ofs)(-dp_ofs);
10551
10552	out_ok:
10553	OUTL (nc_temp, dp_scr)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_temp))))) = (((dp_scr))));
10554	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
10555	return;
10556
10557	out_reject:
10558	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
10559	}
10560
10561
10562	/*==========================================================
10563	**
10564	** ncr chip calculation of the data residual.
10565	**
10566	**==========================================================
10567	**
10568	** As I used to say, the requirement of data residual
10569	** in SCSI is broken, useless and cannot be achieved
10570	** without huge complexity.
10571	** But most OSes and even the official CAM require it.
10572	** When stupidity happens to be so widely spread inside
10573	** a community, it gets hard to convince.
10574	**
10575	** Anyway, I don't care, since I am not going to use
10576	** any software that considers this data residual as
10577	** a relevant information. :)
10578	**
10579	**----------------------------------------------------------
10580	*/
10581
10582	static int ncr_compute_residual(ncb_p np, ccb_p cp)
10583	{
10584	int dp_sg, dp_sgmin, tmp;
10585	int resid=0;
10586	int dp_ofs = 0;
10587
10588	/*
10589	* Check for some data lost or just thrown away.
10590	* We are not required to be quite accurate in this
10591	* situation. Btw, if we are odd for output and the
10592	* device claims some more data, it may well happen
10593	* than our residual be zero. :-)
10594	*/
10595	if (cp->xerr_status & (XE_EXTRA_DATA(1)\|XE_SODL_UNRUN(1<<3)\|XE_SWIDE_OVRUN(1<<4))) {
10596	if (cp->xerr_status & XE_EXTRA_DATA(1))
10597	resid -= cp->extra_bytes;
10598	if (cp->xerr_status & XE_SODL_UNRUN(1<<3))
10599	++resid;
10600	if (cp->xerr_status & XE_SWIDE_OVRUN(1<<4))
10601	--resid;
10602	}
10603
10604
10605	/*
10606	** If SCRIPTS reaches its goal point, then
10607	** there is no additionnal residual.
10608	*/
10609	if (cp->phys.header.lastp == cp->phys.header.goalp)
10610	return resid;
10611
10612	/*
10613	** If the last data pointer is data_io (direction
10614	** unknown), then no data transfer should have
10615	** taken place.
10616	*/
10617	if (cp->phys.header.lastp == NCB_SCRIPTH_PHYS (np, data_io)(np->p_scripth + ((size_t) (&((struct scripth *)0)-> data_io))))
10618	return cp->data_len;
10619
10620	/*
10621	** If no data transfer occurs, or if the data
10622	** pointer is weird, return full residual.
10623	*/
10624	if (cp->startp == cp->phys.header.lastp \|\|
10625	ncr_evaluate_dp(np, cp, scr_to_cpu(cp->phys.header.lastp)(cp->phys.header.lastp),
10626	&dp_ofs) < 0) {
10627	return cp->data_len;
10628	}
10629
10630	/*
10631	** We are now full comfortable in the computation
10632	** of the data residual (2's complement).
10633	*/
10634	dp_sgmin = MAX_SCATTER((127)) - cp->segments;
10635	resid = -cp->ext_ofs;
10636	for (dp_sg = cp->ext_sg; dp_sg < MAX_SCATTER((127)); ++dp_sg) {
10637	tmp = scr_to_cpu(cp->phys.data[dp_sg].size)(cp->phys.data[dp_sg].size);
10638	resid += (tmp & 0xffffff);
10639	}
10640
10641	/*
10642	** Hopefully, the result is not too wrong.
10643	*/
10644	return resid;
10645	}
10646
10647	/*==========================================================
10648	**
10649	** Print out the containt of a SCSI message.
10650	**
10651	**==========================================================
10652	*/
10653
10654	static int ncr_show_msg (u_charunsigned char * msg)
10655	{
10656	u_charunsigned char i;
10657	printk ("%x",*msg);
10658	if (*msg==M_EXTENDED(0x01)) {
10659	for (i=1;i<8;i++) {
10660	if (i-1>msg[1]) break;
10661	printk ("-%x",msg[i]);
10662	};
10663	return (i+1);
10664	} else if ((*msg & 0xf0) == 0x20) {
10665	printk ("-%x",msg[1]);
10666	return (2);
10667	};
10668	return (1);
10669	}
10670
10671	static void ncr_print_msg (ccb_p cp, char label, u_charunsigned char msg)
10672	{
10673	if (cp)
10674	PRINT_ADDR(cp->cmd);
10675	if (label)
10676	printk ("%s: ", label);
10677
10678	(void) ncr_show_msg (msg);
10679	printk (".\n");
10680	}
10681
10682	/*===================================================================
10683	**
10684	** Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER.
10685	**
10686	**===================================================================
10687	**
10688	** Was Sie schon immer ueber transfermode negotiation wissen wollten ...
10689	**
10690	** We try to negotiate sync and wide transfer only after
10691	** a successfull inquire command. We look at byte 7 of the
10692	** inquire data to determine the capabilities of the target.
10693	**
10694	** When we try to negotiate, we append the negotiation message
10695	** to the identify and (maybe) simple tag message.
10696	** The host status field is set to HS_NEGOTIATE to mark this
10697	** situation.
10698	**
10699	** If the target doesn't answer this message immediately
10700	** (as required by the standard), the SIR_NEGO_FAILED interrupt
10701	** will be raised eventually.
10702	** The handler removes the HS_NEGOTIATE status, and sets the
10703	** negotiated value to the default (async / nowide).
10704	**
10705	** If we receive a matching answer immediately, we check it
10706	** for validity, and set the values.
10707	**
10708	** If we receive a Reject message immediately, we assume the
10709	** negotiation has failed, and fall back to standard values.
10710	**
10711	** If we receive a negotiation message while not in HS_NEGOTIATE
10712	** state, it's a target initiated negotiation. We prepare a
10713	** (hopefully) valid answer, set our parameters, and send back
10714	** this answer to the target.
10715	**
10716	** If the target doesn't fetch the answer (no message out phase),
10717	** we assume the negotiation has failed, and fall back to default
10718	** settings (SIR_NEGO_PROTO interrupt).
10719	**
10720	** When we set the values, we adjust them in all ccbs belonging
10721	** to this target, in the controller's register, and in the "phys"
10722	** field of the controller's struct ncb.
10723	**
10724	**---------------------------------------------------------------------
10725	*/
10726
10727	/*==========================================================
10728	**
10729	** ncr chip handler for SYNCHRONOUS DATA TRANSFER
10730	** REQUEST (SDTR) message.
10731	**
10732	**==========================================================
10733	**
10734	** Read comments above.
10735	**
10736	**----------------------------------------------------------
10737	*/
10738	static void ncr_sync_nego(ncb_p np, tcb_p tp, ccb_p cp)
10739	{
10740	u_charunsigned char scntl3, scntl4;
10741	u_charunsigned char chg, ofs, per, fak;
10742
10743	/*
10744	** Synchronous request message received.
10745	*/
10746
10747	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10748	ncr_print_msg(cp, "sync msg in", np->msgin);
10749	};
10750
10751	/*
10752	** get requested values.
10753	*/
10754
10755	chg = 0;
10756	per = np->msgin[3];
10757	ofs = np->msgin[4];
10758	if (ofs==0) per=255;
10759
10760	/*
10761	** if target sends SDTR message,
10762	** it CAN transfer synch.
10763	*/
10764
10765	if (ofs)
10766	tp->inq_byte7 \|= INQ7_SYNC(0x10);
10767
10768	/*
10769	** check values against driver limits.
10770	*/
10771
10772	if (per < np->minsync)
10773	{chg = 1; per = np->minsync;}
10774	if (per < tp->minsync)
10775	{chg = 1; per = tp->minsync;}
10776	if (ofs > tp->maxoffs)
10777	{chg = 1; ofs = tp->maxoffs;}
10778
10779	/*
10780	** Check against controller limits.
10781	*/
10782	fak = 7;
10783	scntl3 = 0;
10784	scntl4 = 0;
10785	if (ofs != 0) {
10786	ncr_getsync(np, per, &fak, &scntl3);
10787	if (fak > 7) {
10788	chg = 1;
10789	ofs = 0;
10790	}
10791	}
10792	if (ofs == 0) {
10793	fak = 7;
10794	per = 0;
10795	scntl3 = 0;
10796	scntl4 = 0;
10797	tp->minsync = 0;
10798	}
10799
10800	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10801	PRINT_ADDR(cp->cmd);
10802	printk ("sync: per=%d scntl3=0x%x scntl4=0x%x ofs=%d fak=%d chg=%d.\n",
10803	per, scntl3, scntl4, ofs, fak, chg);
10804	}
10805
10806	if (INB (HS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr1))))) == HS_NEGOTIATE(2)) {
10807	OUTB (HS_PRT, HS_BUSY)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr1))))) = ((((1)))));
10808	switch (cp->nego_status) {
10809	case NS_SYNC(1):
10810	/*
10811	** This was an answer message
10812	*/
10813	if (chg) {
10814	/*
10815	** Answer wasn't acceptable.
10816	*/
10817	ncr_setsync (np, cp, 0, 0xe0, 0);
10818	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
10819	} else {
10820	/*
10821	** Answer is ok.
10822	*/
10823	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
10824	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
10825	ncr_setsync (np, cp, scntl3, (fak<<5)\|ofs,0);
10826	else
10827	ncr_setsync (np, cp, scntl3, ofs, scntl4);
10828
10829	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
10830	};
10831	return;
10832
10833	case NS_WIDE(2):
10834	ncr_setwide (np, cp, 0, 0);
10835	break;
10836	};
10837	};
10838
10839	/*
10840	** It was a request. Set value and
10841	** prepare an answer message
10842	*/
10843
10844	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
10845	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
10846	ncr_setsync (np, cp, scntl3, (fak<<5)\|ofs,0);
10847	else
10848	ncr_setsync (np, cp, scntl3, ofs, scntl4);
10849
10850	np->msgout[0] = M_EXTENDED(0x01);
10851	np->msgout[1] = 3;
10852	np->msgout[2] = M_X_SYNC_REQ(0x01);
10853	np->msgout[3] = per;
10854	np->msgout[4] = ofs;
10855
10856	cp->nego_status = NS_SYNC(1);
10857
10858	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10859	ncr_print_msg(cp, "sync msgout", np->msgout);
10860	}
10861
10862	np->msgin [0] = M_NOOP(0x08);
10863
10864	if (!ofs)
10865	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
10866	else
10867	OUTL_DSP (NCB_SCRIPTH_PHYS (np, sdtr_resp))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->sdtr_resp)))))))); } while (0);
10868	}
10869
10870	/*==========================================================
10871	**
10872	** ncr chip handler for WIDE DATA TRANSFER REQUEST
10873	** (WDTR) message.
10874	**
10875	**==========================================================
10876	**
10877	** Read comments above.
10878	**
10879	**----------------------------------------------------------
10880	*/
10881	static void ncr_wide_nego(ncb_p np, tcb_p tp, ccb_p cp)
10882	{
10883	u_charunsigned char chg, wide;
10884
10885	/*
10886	** Wide request message received.
10887	*/
10888	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10889	ncr_print_msg(cp, "wide msgin", np->msgin);
10890	};
10891
10892	/*
10893	** get requested values.
10894	*/
10895
10896	chg = 0;
10897	wide = np->msgin[3];
10898
10899	/*
10900	** if target sends WDTR message,
10901	** it CAN transfer wide.
10902	*/
10903
10904	if (wide)
10905	tp->inq_byte7 \|= INQ7_WIDE16(0x20);
10906
10907	/*
10908	** check values against driver limits.
10909	*/
10910
10911	if (wide > tp->usrwide)
10912	{chg = 1; wide = tp->usrwide;}
10913
10914	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10915	PRINT_ADDR(cp->cmd);
10916	printk ("wide: wide=%d chg=%d.\n", wide, chg);
10917	}
10918
10919	if (INB (HS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr1))))) == HS_NEGOTIATE(2)) {
10920	OUTB (HS_PRT, HS_BUSY)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr1))))) = ((((1)))));
10921	switch (cp->nego_status) {
10922	case NS_WIDE(2):
10923	/*
10924	** This was an answer message
10925	*/
10926	if (chg) {
10927	/*
10928	** Answer wasn't acceptable.
10929	*/
10930	ncr_setwide (np, cp, 0, 1);
10931	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
10932	} else {
10933	/*
10934	** Answer is ok.
10935	*/
10936	ncr_setwide (np, cp, wide, 1);
10937	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
10938	};
10939	return;
10940
10941	case NS_SYNC(1):
10942	ncr_setsync (np, cp, 0, 0xe0, 0);
10943	break;
10944	};
10945	};
10946
10947	/*
10948	** It was a request, set value and
10949	** prepare an answer message
10950	*/
10951
10952	ncr_setwide (np, cp, wide, 1);
10953
10954	np->msgout[0] = M_EXTENDED(0x01);
10955	np->msgout[1] = 2;
10956	np->msgout[2] = M_X_WIDE_REQ(0x03);
10957	np->msgout[3] = wide;
10958
10959	np->msgin [0] = M_NOOP(0x08);
10960
10961	cp->nego_status = NS_WIDE(2);
10962
10963	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10964	ncr_print_msg(cp, "wide msgout", np->msgout);
10965	}
10966
10967	OUTL_DSP (NCB_SCRIPTH_PHYS (np, wdtr_resp))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->wdtr_resp)))))))); } while (0);
10968	}
10969	/*==========================================================
10970	**
10971	** ncr chip handler for PARALLEL PROTOCOL REQUEST
10972	** (PPR) message.
10973	**
10974	**==========================================================
10975	**
10976	** Read comments above.
10977	**
10978	**----------------------------------------------------------
10979	*/
10980	static void ncr_ppr_nego(ncb_p np, tcb_p tp, ccb_p cp)
10981	{
10982	u_charunsigned char scntl3, scntl4;
10983	u_charunsigned char chg, ofs, per, fak, wth, dt;
10984
10985	/*
10986	** PPR message received.
10987	*/
10988
10989	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
10990	ncr_print_msg(cp, "ppr msg in", np->msgin);
10991	};
10992
10993	/*
10994	** get requested values.
10995	*/
10996
10997	chg = 0;
10998	per = np->msgin[3];
10999	ofs = np->msgin[5];
11000	wth = np->msgin[6];
11001	dt = np->msgin[7];
11002	if (ofs==0) per=255;
11003
11004	/*
11005	** if target sends sync (wide),
11006	** it CAN transfer synch (wide).
11007	*/
11008
11009	if (ofs)
11010	tp->inq_byte7 \|= INQ7_SYNC(0x10);
11011
11012	if (wth)
11013	tp->inq_byte7 \|= INQ7_WIDE16(0x20);
11014
11015	/*
11016	** check values against driver limits.
11017	*/
11018
11019	if (wth > tp->usrwide)
11020	{chg = 1; wth = tp->usrwide;}
11021	if (per < np->minsync)
11022	{chg = 1; per = np->minsync;}
11023	if (per < tp->minsync)
11024	{chg = 1; per = tp->minsync;}
11025	if (ofs > tp->maxoffs)
11026	{chg = 1; ofs = tp->maxoffs;}
11027
11028	/*
11029	** Check against controller limits.
11030	*/
11031	fak = 7;
11032	scntl3 = 0;
11033	scntl4 = 0;
11034	if (ofs != 0) {
11035	scntl4 = dt ? 0x80 : 0;
11036	ncr_getsync(np, per, &fak, &scntl3);
11037	if (fak > 7) {
11038	chg = 1;
11039	ofs = 0;
11040	}
11041	}
11042	if (ofs == 0) {
11043	fak = 7;
11044	per = 0;
11045	scntl3 = 0;
11046	scntl4 = 0;
11047	tp->minsync = 0;
11048	}
11049
11050	/*
11051	** If target responds with Ultra 3 speed
11052	** but narrow or not DT, reject.
11053	** If target responds with DT request
11054	** but not Ultra3 speeds, reject message,
11055	** reset min sync for target to 0x0A and
11056	** set flags to re-negotiate.
11057	*/
11058
11059	if ((per == 0x09) && ofs && (!wth \|\| !dt))
11060	chg = 1;
11061	else if (( (per > 0x09) && dt) )
11062	chg = 2;
11063
11064
11065	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
11066	PRINT_ADDR(cp->cmd);
11067	printk ("ppr: wth=%d per=%d scntl3=0x%x scntl4=0x%x ofs=%d fak=%d chg=%d.\n",
11068	wth, per, scntl3, scntl4, ofs, fak, chg);
11069	}
11070
11071	if (INB (HS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr1))))) == HS_NEGOTIATE(2)) {
11072	OUTB (HS_PRT, HS_BUSY)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr1))))) = ((((1)))));
11073	switch (cp->nego_status) {
11074	case NS_PPR(4):
11075	/*
11076	** This was an answer message
11077	*/
11078	if (chg) {
11079	/*
11080	** Answer wasn't acceptable.
11081	*/
11082	if (chg == 2) {
11083	/* Send message reject and reset flags for
11084	** host to re-negotiate with min period 0x0A.
11085	*/
11086	tp->minsync = 0x0A;
11087	tp->period = 0;
11088	tp->widedone = 0;
11089	}
11090	ncr_setsyncwide (np, cp, 0, 0xe0, 0, 0);
11091	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
11092	} else {
11093	/*
11094	** Answer is ok.
11095	*/
11096
11097	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
11098	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
11099	ncr_setsyncwide (np, cp, scntl3, (fak<<5)\|ofs,0, wth);
11100	else
11101	ncr_setsyncwide (np, cp, scntl3, ofs, scntl4, wth);
11102
11103	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
11104
11105	};
11106	return;
11107
11108	case NS_SYNC(1):
11109	ncr_setsync (np, cp, 0, 0xe0, 0);
11110	break;
11111
11112	case NS_WIDE(2):
11113	ncr_setwide (np, cp, 0, 0);
11114	break;
11115	};
11116	};
11117
11118	/*
11119	** It was a request. Set value and
11120	** prepare an answer message
11121	**
11122	** If narrow or not DT and requesting Ultra3
11123	** slow the bus down and force ST. If not
11124	** requesting Ultra3, force ST.
11125	** Max offset is 31=0x1f if ST mode.
11126	*/
11127
11128	if ((per == 0x09) && ofs && (!wth \|\| !dt)) {
11129	per = 0x0A;
11130	dt = 0;
11131	ofs &= 0x1f;
11132	}
11133	else if ( (per > 0x09) && dt) {
11134	dt = 0;
11135	ofs &= 0x1f;
11136	}
11137
11138	if ((np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
11139	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21))
11140	ncr_setsyncwide (np, cp, scntl3, (fak<<5)\|ofs,0, wth);
11141	else
11142	ncr_setsyncwide (np, cp, scntl3, ofs, scntl4, wth);
11143
11144	np->msgout[0] = M_EXTENDED(0x01);
11145	np->msgout[1] = 6;
11146	np->msgout[2] = M_X_PPR_REQ(0x04);
11147	np->msgout[3] = per;
11148	np->msgout[4] = 0;
11149	np->msgout[5] = ofs;
11150	np->msgout[6] = wth;
11151	np->msgout[7] = dt;
11152
11153	cp->nego_status = NS_PPR(4);
11154
11155	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
11156	ncr_print_msg(cp, "ppr msgout", np->msgout);
11157	}
11158
11159	np->msgin [0] = M_NOOP(0x08);
11160
11161	if (!ofs)
11162	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
11163	else
11164	OUTL_DSP (NCB_SCRIPTH_PHYS (np, ppr_resp))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->ppr_resp)))))))); } while (0);
11165	}
11166
11167
11168
11169	/*
11170	** Reset SYNC or WIDE to default settings.
11171	** Called when a negotiation does not succeed either
11172	** on rejection or on protocol error.
11173	*/
11174	static void ncr_nego_default(ncb_p np, tcb_p tp, ccb_p cp)
11175	{
11176	/*
11177	** any error in negotiation:
11178	** fall back to default mode.
11179	*/
11180	switch (cp->nego_status) {
11181
11182	case NS_SYNC(1):
11183	ncr_setsync (np, cp, 0, 0xe0, 0);
11184	break;
11185
11186	case NS_WIDE(2):
11187	ncr_setwide (np, cp, 0, 0);
11188	break;
11189
11190	case NS_PPR(4):
11191	/*
11192	* ppr_negotiation is set to 1 on the first ppr nego command.
11193	* If ppr is successful, it is reset to 2.
11194	* If unsuccessful it is reset to 0.
11195	*/
11196	if (DEBUG_FLAGSncr_debug & DEBUG_NEGO(0x0200)) {
11197	tcb_p tp=&np->target[cp->target];
11198	u_charunsigned char factor, offset, width;
11199
11200	ncr_get_xfer_info ( np, tp, &factor, &offset, &width);
11201
11202	printk("Current factor %d offset %d width %d\n",
11203	factor, offset, width);
11204	}
11205	if (tp->ppr_negotiation == 2)
11206	ncr_setsyncwide (np, cp, 0, 0xe0, 0, 0);
11207	else if (tp->ppr_negotiation == 1) {
11208
11209	/* First ppr command has received a M REJECT.
11210	* Do not change the existing wide/sync parameter
11211	* values (asyn/narrow if this as the first nego;
11212	* may be different if target initiates nego.).
11213	*/
11214	tp->ppr_negotiation = 0;
11215	}
11216	else
11217	{
11218	tp->ppr_negotiation = 0;
11219	ncr_setwide (np, cp, 0, 0);
11220	}
11221	break;
11222	};
11223	np->msgin [0] = M_NOOP(0x08);
11224	np->msgout[0] = M_NOOP(0x08);
11225	cp->nego_status = 0;
11226	}
11227
11228	/*==========================================================
11229	**
11230	** ncr chip handler for MESSAGE REJECT received for
11231	** a WIDE or SYNCHRONOUS negotiation.
11232	**
11233	** clear the PPR negotiation flag, all future nego.
11234	** will be SDTR and WDTR
11235	**
11236	**==========================================================
11237	**
11238	** Read comments above.
11239	**
11240	**----------------------------------------------------------
11241	*/
11242	static void ncr_nego_rejected(ncb_p np, tcb_p tp, ccb_p cp)
11243	{
11244	ncr_nego_default(np, tp, cp);
11245	OUTB (HS_PRT, HS_BUSY)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr1))))) = ((((1)))));
11246	}
11247
11248
11249	/*==========================================================
11250	**
11251	**
11252	** ncr chip exception handler for programmed interrupts.
11253	**
11254	**
11255	**==========================================================
11256	*/
11257
11258	void ncr_int_sir (ncb_p np)
11259	{
11260	u_charunsigned char num = INB (nc_dsps)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsps)))));
11261	u_longunsigned long dsa = INL (nc_dsa)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsa)))));
11262	ccb_p cp = ncr_ccb_from_dsa(np, dsa);
11263	u_charunsigned char target = INB (nc_sdid)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_sdid))))) & 0x0f;
11264	tcb_p tp = &np->target[target];
11265	int tmp;
11266
11267	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("I#%d", num);
11268
11269	switch (num) {
11270	/*
11271	** See comments in the SCRIPTS code.
11272	*/
11273	#ifdef SCSI_NCR_PCIQ_SYNC_ON_INTR
11274	case SIR_DUMMY_INTERRUPT(21):
11275	goto out;
11276	#endif
11277
11278	/*
11279	** The C code is currently trying to recover from something.
11280	** Typically, user want to abort some command.
11281	*/
11282	case SIR_SCRIPT_STOPPED(7):
11283	case SIR_TARGET_SELECTED(14):
11284	case SIR_ABORT_SENT(17):
11285	case SIR_AUTO_SENSE_DONE(20):
11286	ncr_sir_task_recovery(np, num);
11287	return;
11288	/*
11289	** The device didn't go to MSG OUT phase after having
11290	** been selected with ATN. We donnot want to handle
11291	** that.
11292	*/
11293	case SIR_SEL_ATN_NO_MSG_OUT(2):
11294	printk ("%s:%d: No MSG OUT phase after selection with ATN.\n",
11295	ncr_name (np), target);
11296	goto out_stuck;
11297	/*
11298	** The device didn't switch to MSG IN phase after
11299	** having reseleted the initiator.
11300	*/
11301	case SIR_RESEL_NO_MSG_IN(11):
11302	/*
11303	** After reselection, the device sent a message that wasn't
11304	** an IDENTIFY.
11305	*/
11306	case SIR_RESEL_NO_IDENTIFY(12):
11307	/*
11308	** If devices reselecting without sending an IDENTIFY
11309	** message still exist, this should help.
11310	** We just assume lun=0, 1 CCB, no tag.
11311	*/
11312	if (tp->l0p) {
11313	OUTL (nc_dsa, scr_to_cpu(tp->l0p->tasktbl[0]))(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsa))))) = ((((tp->l0p ->tasktbl[0])))));
11314	OUTL_DSP (NCB_SCRIPT_PHYS (np, resel_go))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->resel_go)))))))); } while (0);
11315	return;
11316	}
11317	/*
11318	** The device reselected a LUN we donnot know of.
11319	*/
11320	case SIR_RESEL_BAD_LUN(13):
11321	np->msgout[0] = M_RESET(0x0c);
11322	goto out;
11323	/*
11324	** The device reselected for an untagged nexus and we
11325	** haven't any.
11326	*/
11327	case SIR_RESEL_BAD_I_T_L(15):
11328	np->msgout[0] = M_ABORT(0x06);
11329	goto out;
11330	/*
11331	** The device reselected for a tagged nexus that we donnot
11332	** have.
11333	*/
11334	case SIR_RESEL_BAD_I_T_L_Q(16):
11335	np->msgout[0] = M_ABORT_TAG(0x0d);
11336	goto out;
11337	/*
11338	** The SCRIPTS let us know that the device has grabbed
11339	** our message and will abort the job.
11340	*/
11341	case SIR_RESEL_ABORTED(18):
11342	np->lastmsg = np->msgout[0];
11343	np->msgout[0] = M_NOOP(0x08);
11344	printk ("%s:%d: message %x sent on bad reselection.\n",
11345	ncr_name (np), target, np->lastmsg);
11346	goto out;
11347	/*
11348	** The SCRIPTS let us know that a message has been
11349	** successfully sent to the device.
11350	*/
11351	case SIR_MSG_OUT_DONE(19):
11352	np->lastmsg = np->msgout[0];
11353	np->msgout[0] = M_NOOP(0x08);
11354	/* Should we really care of that */
11355	if (np->lastmsg == M_PARITY(0x09) \|\| np->lastmsg == M_ID_ERROR(0x05)) {
11356	if (cp) {
11357	cp->xerr_status &= ~XE_PARITY_ERR(4);
11358	if (!cp->xerr_status)
11359	OUTOFFB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) & ~((1u<<7))))));
11360	}
11361	}
11362	goto out;
11363	/*
11364	** The device didn't send a GOOD SCSI status.
11365	** We may have some work to do prior to allow
11366	** the SCRIPTS processor to continue.
11367	*/
11368	case SIR_BAD_STATUS(1):
11369	if (!cp)
11370	goto out;
11371	ncr_sir_to_redo(np, num, cp);
11372	return;
11373	/*
11374	** We are asked by the SCRIPTS to prepare a
11375	** REJECT message.
11376	*/
11377	case SIR_REJECT_TO_SEND(8):
11378	ncr_print_msg(cp, "M_REJECT to send for ", np->msgin);
11379	np->msgout[0] = M_REJECT(0x07);
11380	goto out;
11381	/*
11382	** We have been ODD at the end of a DATA IN
11383	** transfer and the device didn't send a
11384	** IGNORE WIDE RESIDUE message.
11385	** It is a data overrun condition.
11386	*/
11387	case SIR_SWIDE_OVERRUN(9):
11388	if (cp) {
11389	OUTONB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) \| ((1u<<7))))));
11390	cp->xerr_status \|= XE_SWIDE_OVRUN(1<<4);
11391	}
11392	goto out;
11393	/*
11394	** We have been ODD at the end of a DATA OUT
11395	** transfer.
11396	** It is a data underrun condition.
11397	*/
11398	case SIR_SODL_UNDERRUN(10):
11399	if (cp) {
11400	OUTONB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) \| ((1u<<7))))));
11401	cp->xerr_status \|= XE_SODL_UNRUN(1<<3);
11402	}
11403	goto out;
11404	/*
11405	** The device wants us to tranfer more data than
11406	** expected or in the wrong direction.
11407	** The number of extra bytes is in scratcha.
11408	** It is a data overrun condition.
11409	*/
11410	case SIR_DATA_OVERRUN(22):
11411	if (cp) {
11412	OUTONB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) \| ((1u<<7))))));
11413	cp->xerr_status \|= XE_EXTRA_DATA(1);
11414	cp->extra_bytes += INL (nc_scratcha)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_scratcha)))));
11415	}
11416	goto out;
11417	/*
11418	** The device switched to an illegal phase (4/5).
11419	*/
11420	case SIR_BAD_PHASE(23):
11421	if (cp) {
11422	OUTONB (HF_PRT, HF_EXT_ERR)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr3))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr3))))) \| ((1u<<7))))));
11423	cp->xerr_status \|= XE_BAD_PHASE(2);
11424	}
11425	goto out;
11426	/*
11427	** We received a message.
11428	*/
11429	case SIR_MSG_RECEIVED(3):
11430	if (!cp)
11431	goto out_stuck;
11432	switch (np->msgin [0]) {
11433	/*
11434	** We received an extended message.
11435	** We handle MODIFY DATA POINTER, SDTR, WDTR
11436	** and reject all other extended messages.
11437	*/
11438	case M_EXTENDED(0x01):
11439	switch (np->msgin [2]) {
11440	case M_X_MODIFY_DP(0x00):
11441	if (DEBUG_FLAGSncr_debug & DEBUG_POINTER(0x0020))
11442	ncr_print_msg(cp,"modify DP",np->msgin);
11443	tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) +
11444	(np->msgin[5]<<8) + (np->msgin[6]);
11445	ncr_modify_dp(np, tp, cp, tmp);
11446	return;
11447	case M_X_SYNC_REQ(0x01):
11448	ncr_sync_nego(np, tp, cp);
11449	return;
11450	case M_X_WIDE_REQ(0x03):
11451	ncr_wide_nego(np, tp, cp);
11452	return;
11453	case M_X_PPR_REQ(0x04):
11454	ncr_ppr_nego(np, tp, cp);
11455	return;
11456	default:
11457	goto out_reject;
11458	}
11459	break;
11460	/*
11461	** We received a 1/2 byte message not handled from SCRIPTS.
11462	** We are only expecting MESSAGE REJECT and IGNORE WIDE
11463	** RESIDUE messages that haven't been anticipated by
11464	** SCRIPTS on SWIDE full condition. Unanticipated IGNORE
11465	** WIDE RESIDUE messages are aliased as MODIFY DP (-1).
11466	*/
11467	case M_IGN_RESIDUE(0x23):
11468	if (DEBUG_FLAGSncr_debug & DEBUG_POINTER(0x0020))
11469	ncr_print_msg(cp,"ign wide residue", np->msgin);
11470	ncr_modify_dp(np, tp, cp, -1);
11471	return;
11472	case M_REJECT(0x07):
11473	if (INB (HS_PRT)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_scr1))))) == HS_NEGOTIATE(2))
11474	ncr_nego_rejected(np, tp, cp);
11475	else {
11476	PRINT_ADDR(cp->cmd);
11477	printk ("M_REJECT received (%x:%x).\n",
11478	scr_to_cpu(np->lastmsg)(np->lastmsg), np->msgout[0]);
11479	}
11480	goto out_clrack;
11481	break;
11482	default:
11483	goto out_reject;
11484	}
11485	break;
11486	/*
11487	** We received an unknown message.
11488	** Ignore all MSG IN phases and reject it.
11489	*/
11490	case SIR_MSG_WEIRD(4):
11491	ncr_print_msg(cp, "WEIRD message received", np->msgin);
11492	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_weird))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_weird)))))))); } while (0);
11493	return;
11494	/*
11495	** Negotiation failed.
11496	** Target does not send us the reply.
11497	** Remove the HS_NEGOTIATE status.
11498	*/
11499	case SIR_NEGO_FAILED(5):
11500	OUTB (HS_PRT, HS_BUSY)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scr1))))) = ((((1)))));
11501	/*
11502	** Negotiation failed.
11503	** Target does not want answer message.
11504	*/
11505	case SIR_NEGO_PROTO(6):
11506	ncr_nego_default(np, tp, cp);
11507	goto out;
11508	};
11509
11510	out:
11511	OUTONB_STD ()do { do { ; } while(0); (((volatile unsigned char ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dcntl ))))) = (((((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dcntl))))) \| ( (0x04\|0x01)))))); } while (0);
11512	return;
11513	out_reject:
11514	OUTL_DSP (NCB_SCRIPTH_PHYS (np, msg_bad))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_scripth + ((size_t) (&((struct scripth )0)->msg_bad)))))))); } while (0);
11515	return;
11516	out_clrack:
11517	OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack))do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsp ))))) = (((((np->p_script + ((size_t) (&((struct script )0)->clrack)))))))); } while (0);
11518	return;
11519	out_stuck:
11520	return;
11521	}
11522
11523
11524	/*==========================================================
11525	**
11526	**
11527	** Aquire a control block
11528	**
11529	**
11530	**==========================================================
11531	*/
11532
11533	static ccb_p ncr_get_ccb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln)
11534	{
11535	tcb_p tp = &np->target[tn];
11536	lcb_p lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
11537	u_shortunsigned short tag = NO_TAG(256);
11538	XPT_QUEHEAD *qp;
11539	ccb_p cp = (ccb_p) 0;
11540
11541	/*
11542	** Allocate a new CCB if needed.
11543	*/
11544	if (xpt_que_empty(&np->free_ccbq))
11545	(void) ncr_alloc_ccb(np);
11546
11547	/*
11548	** Look for a free CCB
11549	*/
11550	qp = xpt_remque_head(&np->free_ccbq);
11551	if (!qp)
11552	goto out;
11553	cp = xpt_que_entry(qp, struct ccb, link_ccbq)((struct ccb )((char )(qp)-(unsigned long)(&((struct ccb *)0)->link_ccbq)));
11554
11555	/*
11556	** If the LCB is not yet available and we already
11557	** have queued a CCB for a LUN without LCB,
11558	** give up. Otherwise all is fine. :-)
11559	*/
11560	if (!lp) {
11561	if (xpt_que_empty(&np->b0_ccbq))
11562	xpt_insque_head(&cp->link_ccbq, &np->b0_ccbq)__xpt_que_add(&cp->link_ccbq, &np->b0_ccbq, (& np->b0_ccbq)->flink);
11563	else
11564	goto out_free;
11565	} else {
11566	/*
11567	** Tune tag mode if asked by user.
11568	*/
11569	if (lp->queuedepth != lp->numtags) {
11570	ncr_setup_tags(np, tn, ln);
11571	}
11572
11573	/*
11574	** Get a tag for this nexus if required.
11575	** Keep from using more tags than we can handle.
11576	*/
11577	if (lp->usetags) {
11578	if (lp->busyccbs < lp->maxnxs) {
11579	tag = lp->cb_tags[lp->ia_tag];
11580	++lp->ia_tag;
11581	if (lp->ia_tag == MAX_TAGS(8))
11582	lp->ia_tag = 0;
11583	cp->tags_si = lp->tags_si;
11584	++lp->tags_sum[cp->tags_si];
11585	}
11586	else
11587	goto out_free;
11588	}
11589
11590	/*
11591	** Put the CCB in the LUN wait queue and
11592	** count it as busy.
11593	*/
11594	xpt_insque_tail(&cp->link_ccbq, &lp->wait_ccbq)__xpt_que_add(&cp->link_ccbq, (&lp->wait_ccbq)-> blink, &lp->wait_ccbq);
11595	++lp->busyccbs;
11596	}
11597
11598	/*
11599	** Remember all informations needed to free this CCB.
11600	*/
11601	cp->to_abort = 0;
11602	cp->tag = tag;
11603	cp->target = tn;
11604	cp->lun = ln;
11605
11606	if (DEBUG_FLAGSncr_debug & DEBUG_TAGS(0x0400)) {
11607	PRINT_LUN(np, tn, ln);
11608	printk ("ccb @%p using tag %d.\n", cp, tag);
11609	}
11610
11611	out:
11612	return cp;
11613	out_free:
11614	xpt_insque_head(&cp->link_ccbq, &np->free_ccbq)__xpt_que_add(&cp->link_ccbq, &np->free_ccbq, ( &np->free_ccbq)->flink);
11615	return (ccb_p) 0;
11616	}
11617
11618	/*==========================================================
11619	**
11620	**
11621	** Release one control block
11622	**
11623	**
11624	**==========================================================
11625	*/
11626
11627	static void ncr_free_ccb (ncb_p np, ccb_p cp)
11628	{
11629	tcb_p tp = &np->target[cp->target];
11630	lcb_p lp = ncr_lp(np, tp, cp->lun)(!cp->lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(cp ->lun)] : 0;
11631
11632	if (DEBUG_FLAGSncr_debug & DEBUG_TAGS(0x0400)) {
11633	PRINT_LUN(np, cp->target, cp->lun);
11634	printk ("ccb @%p freeing tag %d.\n", cp, cp->tag);
11635	}
11636
11637	/*
11638	** If lun control block available, make available
11639	** the task slot and the tag if any.
11640	** Decrement counters.
11641	*/
11642	if (lp) {
11643	if (cp->tag != NO_TAG(256)) {
11644	lp->cb_tags[lp->if_tag++] = cp->tag;
11645	if (lp->if_tag == MAX_TAGS(8))
11646	lp->if_tag = 0;
11647	--lp->tags_sum[cp->tags_si];
11648	lp->tasktbl[cp->tag] = cpu_to_scr(np->p_bad_i_t_l_q)(np->p_bad_i_t_l_q);
11649	} else {
11650	lp->tasktbl[0] = cpu_to_scr(np->p_bad_i_t_l)(np->p_bad_i_t_l);
11651	}
11652	--lp->busyccbs;
11653	if (cp->queued) {
11654	--lp->queuedccbs;
11655	}
11656	}
11657
11658	/*
11659	** Make this CCB available.
11660	*/
11661	xpt_remque(&cp->link_ccbq)__xpt_que_del((&cp->link_ccbq)->blink, (&cp-> link_ccbq)->flink);
11662	xpt_insque_head(&cp->link_ccbq, &np->free_ccbq)__xpt_que_add(&cp->link_ccbq, &np->free_ccbq, ( &np->free_ccbq)->flink);
11663	cp -> host_statusphys.header.status[1] = HS_IDLE(0);
11664	cp -> queued = 0;
11665	}
11666
11667	/*------------------------------------------------------------------------
11668	** Allocate a CCB and initialize its fixed part.
11669	**------------------------------------------------------------------------
11670	**------------------------------------------------------------------------
11671	*/
11672	static ccb_p ncr_alloc_ccb(ncb_p np)
11673	{
11674	ccb_p cp = 0;
11675	int hcode;
11676
11677	/*
11678	** Allocate memory for this CCB.
11679	*/
11680	cp = m_calloc_dma(sizeof(struct ccb), "CCB")m_calloc(sizeof(struct ccb), "CCB");
11681	if (!cp)
11682	return 0;
11683
11684	/*
11685	** Count it and initialyze it.
11686	*/
11687	np->actccbs++;
11688
11689	/*
11690	** Remember virtual and bus address of this ccb.
11691	*/
11692	cp->p_ccb = vtobus(cp)virt_to_phys(cp);
11693
11694	/*
11695	** Insert this ccb into the hashed list.
11696	*/
11697	hcode = CCB_HASH_CODE(cp->p_ccb)(((cp->p_ccb) >> 11) & ((1UL << 8)-1));
11698	cp->link_ccbh = np->ccbh[hcode];
11699	np->ccbh[hcode] = cp;
11700
11701	/*
11702	** Initialyze the start and restart actions.
11703	*/
11704	cp->phys.header.go.start = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle))((np->p_script + ((size_t) (&((struct script *)0)-> idle))));
11705	cp->phys.header.go.restart = cpu_to_scr(NCB_SCRIPTH_PHYS(np,bad_i_t_l))((np->p_scripth + ((size_t) (&((struct scripth *)0)-> bad_i_t_l))));
11706
11707	/*
11708	** Initilialyze some other fields.
11709	*/
11710	cp->phys.smsg_ext.addr = cpu_to_scr(NCB_PHYS(np, msgin[2]))((np->p_ncb + ((size_t) (&((struct ncb *)0)->msgin[ 2]))));
11711
11712	/*
11713	** Chain into wakeup list and free ccb queue.
11714	*/
11715	cp->link_ccb = np->ccbc;
11716	np->ccbc = cp;
11717
11718	xpt_insque_head(&cp->link_ccbq, &np->free_ccbq)__xpt_que_add(&cp->link_ccbq, &np->free_ccbq, ( &np->free_ccbq)->flink);
11719
11720	return cp;
11721	}
11722
11723	/*------------------------------------------------------------------------
11724	** Look up a CCB from a DSA value.
11725	**------------------------------------------------------------------------
11726	**------------------------------------------------------------------------
11727	*/
11728	static ccb_p ncr_ccb_from_dsa(ncb_p np, u_longunsigned long dsa)
11729	{
11730	int hcode;
11731	ccb_p cp;
11732
11733	hcode = CCB_HASH_CODE(dsa)(((dsa) >> 11) & ((1UL << 8)-1));
11734	cp = np->ccbh[hcode];
11735	while (cp) {
11736	if (cp->p_ccb == dsa)
11737	break;
11738	cp = cp->link_ccbh;
11739	}
11740
11741	return cp;
11742	}
11743
11744	/*==========================================================
11745	**
11746	**
11747	** Allocation of resources for Targets/Luns/Tags.
11748	**
11749	**
11750	**==========================================================
11751	*/
11752
11753
11754	/*------------------------------------------------------------------------
11755	** Target control block initialisation.
11756	**------------------------------------------------------------------------
11757	** This data structure is fully initialized after a SCSI command
11758	** has been successfully completed for this target.
11759	**------------------------------------------------------------------------
11760	*/
11761	static void ncr_init_tcb (ncb_p np, u_charunsigned char tn)
11762	{
11763	/*
11764	** Check some alignments required by the chip.
11765	*/
11766	assert (( (offsetof(struct ncr_reg, nc_sxfer) ^{ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_sxfer )) ^ ((size_t) (&((struct tcb )0)->sval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_sxfer) ^ offsetof(struct tcb , sval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11767); } }
11767	offsetof(struct tcb , sval )) &3) == 0){ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_sxfer )) ^ ((size_t) (&((struct tcb )0)->sval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_sxfer) ^ offsetof(struct tcb , sval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11767); } };
11768	assert (( (offsetof(struct ncr_reg, nc_scntl3) ^{ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_scntl3 )) ^ ((size_t) (&((struct tcb )0)->wval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_scntl3) ^ offsetof(struct tcb , wval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11769); } }
11769	offsetof(struct tcb , wval )) &3) == 0){ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_scntl3 )) ^ ((size_t) (&((struct tcb )0)->wval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_scntl3) ^ offsetof(struct tcb , wval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11769); } };
11770	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
11771	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)){
11772	assert (( (offsetof(struct ncr_reg, nc_scntl4) ^{ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_scntl4 )) ^ ((size_t) (&((struct tcb )0)->uval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_scntl4) ^ offsetof(struct tcb , uval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11773); } }
11773	offsetof(struct tcb , uval )) &3) == 0){ if (!(( (((size_t) (&((struct ncr_reg )0)->nc_scntl4 )) ^ ((size_t) (&((struct tcb )0)->uval))) &3) == 0)) { (void)panic( "assertion \"%s\" failed: file \"%s\", line %d\n" , "( (offsetof(struct ncr_reg, nc_scntl4) ^ offsetof(struct tcb , uval )) &3) == 0" , "../linux/src/drivers/scsi/sym53c8xx.c", 11773); } };
11774	}
11775	}
11776
11777	/*------------------------------------------------------------------------
11778	** Lun control block allocation and initialization.
11779	**------------------------------------------------------------------------
11780	** This data structure is allocated and initialized after a SCSI
11781	** command has been successfully completed for this target/lun.
11782	**------------------------------------------------------------------------
11783	*/
11784	static lcb_p ncr_alloc_lcb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln)
11785	{
11786	tcb_p tp = &np->target[tn];
11787	lcb_p lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
11788
11789	/*
11790	** Already done, return.
11791	*/
11792	if (lp)
11793	return lp;
11794
11795	/*
11796	** Initialize the target control block if not yet.
11797	*/
11798	ncr_init_tcb(np, tn);
11799
11800	/*
11801	** Allocate the lcb bus address array.
11802	** Compute the bus address of this table.
11803	*/
11804	if (ln && !tp->luntbl) {
11805	int i;
11806
11807	tp->luntbl = m_calloc_dma(256, "LUNTBL")m_calloc(256, "LUNTBL");
11808	if (!tp->luntbl)
11809	goto fail;
11810	for (i = 0 ; i < 64 ; i++)
11811	tp->luntbl[i] = cpu_to_scr(NCB_PHYS(np, resel_badlun))((np->p_ncb + ((size_t) (&((struct ncb *)0)->resel_badlun ))));
11812	tp->b_luntbl = cpu_to_scr(vtobus(tp->luntbl))(virt_to_phys(tp->luntbl));
11813	}
11814
11815	/*
11816	** Allocate the table of pointers for LUN(s) > 0, if needed.
11817	*/
11818	if (ln && !tp->lmp) {
11819	tp->lmp = m_calloc(MAX_LUN64 * sizeof(lcb_p), "LMP");
11820	if (!tp->lmp)
11821	goto fail;
11822	}
11823
11824	/*
11825	** Allocate the lcb.
11826	** Make it available to the chip.
11827	*/
11828	lp = m_calloc_dma(sizeof(struct lcb), "LCB")m_calloc(sizeof(struct lcb), "LCB");
11829	if (!lp)
11830	goto fail;
11831	if (ln) {
11832	tp->lmp[ln] = lp;
11833	tp->luntbl[ln] = cpu_to_scr(vtobus(lp))(virt_to_phys(lp));
11834	}
11835	else {
11836	tp->l0p = lp;
11837	tp->b_lun0 = cpu_to_scr(vtobus(lp))(virt_to_phys(lp));
11838	}
11839
11840	/*
11841	** Initialize the CCB queue headers.
11842	*/
11843	xpt_que_init(&lp->busy_ccbq)do { (&lp->busy_ccbq)->flink = (&lp->busy_ccbq ); (&lp->busy_ccbq)->blink = (&lp->busy_ccbq ); } while (0);
11844	xpt_que_init(&lp->wait_ccbq)do { (&lp->wait_ccbq)->flink = (&lp->wait_ccbq ); (&lp->wait_ccbq)->blink = (&lp->wait_ccbq ); } while (0);
11845
11846	/*
11847	** Set max CCBs to 1 and use the default task array
11848	** by default.
11849	*/
11850	lp->maxnxs = 1;
11851	lp->tasktbl = &lp->tasktbl_0;
11852	lp->b_tasktbl = cpu_to_scr(vtobus(lp->tasktbl))(virt_to_phys(lp->tasktbl));
11853	lp->tasktbl[0] = cpu_to_scr(np->p_notask)(np->p_notask);
11854	lp->resel_task = cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_notag))((np->p_script + ((size_t) (&((struct script *)0)-> resel_notag))));
11855
11856	/*
11857	** Initialize command queuing control.
11858	*/
11859	lp->busyccbs = 1;
11860	lp->queuedccbs = 1;
11861	lp->queuedepth = 1;
11862	fail:
11863	return lp;
11864	}
11865
11866
11867	/*------------------------------------------------------------------------
11868	** Lun control block setup on INQUIRY data received.
11869	**------------------------------------------------------------------------
11870	** We only support WIDE, SYNC for targets and CMDQ for logical units.
11871	** This setup is done on each INQUIRY since we are expecting user
11872	** will play with CHANGE DEFINITION commands. :-)
11873	**------------------------------------------------------------------------
11874	*/
11875	static lcb_p ncr_setup_lcb (ncb_p np, u_charunsigned char tn, u_charunsigned char ln, u_charunsigned char *inq_data)
11876	{
11877	tcb_p tp = &np->target[tn];
11878	lcb_p lp = ncr_lp(np, tp, ln)(!ln) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp[(ln)] : 0;
11879	u_charunsigned char inq_byte7;
11880	int i;
11881
11882	/*
11883	** If no lcb, try to allocate it.
11884	*/
11885	if (!lp && !(lp = ncr_alloc_lcb(np, tn, ln)))
11886	goto fail;
11887
11888	#if 0 /* No more used. Left here as provision */
11889	/*
11890	** Get device quirks.
11891	*/
11892	tp->quirks = 0;
11893	if (tp->quirks && bootverbose(np->verbose)) {
11894	PRINT_LUN(np, tn, ln);
11895	printk ("quirks=%x.\n", tp->quirks);
11896	}
11897	#endif
11898
11899	/*
11900	** Evaluate trustable target/unit capabilities.
11901	** We only believe device version >= SCSI-2 that
11902	** use appropriate response data format (2).
11903	** But it seems that some CCS devices also
11904	** support SYNC and I donnot want to frustrate
11905	** anybody. ;-)
11906	*/
11907	inq_byte7 = 0;
11908	if ((inq_data[2] & 0x7) >= 2 && (inq_data[3] & 0xf) == 2)
11909	inq_byte7 = inq_data[7];
11910	else if ((inq_data[2] & 0x7) == 1 && (inq_data[3] & 0xf) == 1)
11911	inq_byte7 = INQ7_SYNC(0x10);
11912
11913	/*
11914	** Throw away announced LUN capabilities if we are told
11915	** that there is no real device supported by the logical unit.
11916	*/
11917	if ((inq_data[0] & 0xe0) > 0x20 \|\| (inq_data[0] & 0x1f) == 0x1f)
11918	inq_byte7 &= (INQ7_SYNC(0x10) \| INQ7_WIDE16(0x20));
11919
11920	/*
11921	** If user is wanting SYNC, force this feature.
11922	*/
11923	if (driver_setup.force_sync_nego)
11924	inq_byte7 \|= INQ7_SYNC(0x10);
11925
11926	/*
11927	** Prepare negotiation if SIP capabilities have changed.
11928	*/
11929	tp->inq_done = 1;
11930	if ((inq_byte7 ^ tp->inq_byte7) & (INQ7_SYNC(0x10) \| INQ7_WIDE16(0x20))) {
11931	tp->inq_byte7 = inq_byte7;
11932	ncr_negotiate(np, tp);
11933	}
11934
11935	/*
11936	** If unit supports tagged commands, allocate and
11937	** initialyze the task table if not yet.
11938	*/
11939	if ((inq_byte7 & INQ7_QUEUE(0x02)) && lp->tasktbl == &lp->tasktbl_0) {
11940	lp->tasktbl = m_calloc_dma(MAX_TASKS4, "TASKTBL")m_calloc((256/4)4, "TASKTBL");
11941	if (!lp->tasktbl) {
11942	lp->tasktbl = &lp->tasktbl_0;
11943	goto fail;
11944	}
11945	lp->b_tasktbl = cpu_to_scr(vtobus(lp->tasktbl))(virt_to_phys(lp->tasktbl));
11946	for (i = 0 ; i < MAX_TASKS(256/4) ; i++)
11947	lp->tasktbl[i] = cpu_to_scr(np->p_notask)(np->p_notask);
11948
11949	lp->cb_tags = m_calloc(MAX_TAGS(8), "CB_TAGS");
11950	if (!lp->cb_tags)
11951	goto fail;
11952	for (i = 0 ; i < MAX_TAGS(8) ; i++)
11953	lp->cb_tags[i] = i;
11954
11955	lp->maxnxs = MAX_TAGS(8);
11956	lp->tags_stime = ktime_get(3HZ)(jiffies + (unsigned long) 3100);
11957	}
11958
11959	/*
11960	** Adjust tagged queueing status if needed.
11961	*/
11962	if ((inq_byte7 ^ lp->inq_byte7) & INQ7_QUEUE(0x02)) {
11963	lp->inq_byte7 = inq_byte7;
11964	lp->numtags = lp->maxtags;
11965	ncr_setup_tags (np, tn, ln);
11966	}
11967
11968	fail:
11969	return lp;
11970	}
11971
11972	/*==========================================================
11973	**
11974	**
11975	** Build Scatter Gather Block
11976	**
11977	**
11978	**==========================================================
11979	**
11980	** The transfer area may be scattered among
11981	** several non adjacent physical pages.
11982	**
11983	** We may use MAX_SCATTER blocks.
11984	**
11985	**----------------------------------------------------------
11986	*/
11987
11988	/*
11989	** We try to reduce the number of interrupts caused
11990	** by unexpected phase changes due to disconnects.
11991	** A typical harddisk may disconnect before ANY block.
11992	** If we wanted to avoid unexpected phase changes at all
11993	** we had to use a break point every 512 bytes.
11994	** Of course the number of scatter/gather blocks is
11995	** limited.
11996	** Under Linux, the scatter/gatter blocks are provided by
11997	** the generic driver. We just have to copy addresses and
11998	** sizes to the data segment array.
11999	*/
12000
12001	/*
12002	** For 64 bit systems, we use the 8 upper bits of the size field
12003	** to provide bus address bits 32-39 to the SCRIPTS processor.
12004	** This allows the 895A and 896 to address up to 1 TB of memory.
12005	** For 32 bit chips on 64 bit systems, we must be provided with
12006	** memory addresses that fit into the first 32 bit bus address
12007	** range and so, this does not matter and we expect an error from
12008	** the chip if this ever happen.
12009	**
12010	** We use a separate function for the case Linux does not provide
12011	** a scatter list in order to allow better code optimization
12012	** for the case we have a scatter list (BTW, for now this just wastes
12013	** about 40 bytes of code for x86, but my guess is that the scatter
12014	** code will get more complex later).
12015	*/
12016
12017	#ifdef SCSI_NCR_USE_64BIT_DAC
12018	#define SCATTER_ONE(data, badd, len)(data)->addr = (badd); (data)->size = (len); \
12019	(data)->addr = cpu_to_scr(badd)(badd); \
12020	(data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len)((((badd) >> 8) & 0xff000000) + len);
12021	#else
12022	#define SCATTER_ONE(data, badd, len)(data)->addr = (badd); (data)->size = (len); \
12023	(data)->addr = cpu_to_scr(badd)(badd); \
12024	(data)->size = cpu_to_scr(len)(len);
12025	#endif
12026
12027	#define CROSS_16MB(p, n)(((((unsigned long) p) + n - 1) ^ ((unsigned long) p)) & ~ 0xffffff) (((((u_longunsigned long) p) + n - 1) ^ ((u_longunsigned long) p)) & ~0xffffff)
12028
12029	static int ncr_scatter_no_sglist(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd)
12030	{
12031	struct scr_tblmove *data = &cp->phys.data[MAX_SCATTER((127))-1];
12032	int segment;
12033
12034	cp->data_len = cmd->request_bufflen;
12035
12036	if (cmd->request_bufflen) {
12037	u_longunsigned long baddr = map_scsi_single_data(np, cmd)(virt_to_phys((cmd)->request_buffer));
12038
12039	SCATTER_ONE(data, baddr, cmd->request_bufflen)(data)->addr = (baddr); (data)->size = (cmd->request_bufflen );;
12040	if (CROSS_16MB(baddr, cmd->request_bufflen)(((((unsigned long) baddr) + cmd->request_bufflen - 1) ^ ( (unsigned long) baddr)) & ~0xffffff)) {
12041	cp->host_flagsphys.header.status[3] \|= HF_PM_TO_C(1u<<6);
12042	#ifdef DEBUG_896R1
12043	printk("He! we are crossing a 16 MB boundary (0x%lx, 0x%x)\n",
12044	baddr, cmd->request_bufflen);
12045	#endif
12046	}
12047	segment = 1;
12048	}
12049	else
12050	segment = 0;
12051
12052	return segment;
12053	}
12054
12055	/*
12056	** DEL 472 - 53C896 Rev 1 - Part Number 609-0393055 - ITEM 5.
12057	**
12058	** We disable data phase mismatch handling from SCRIPTS for data
12059	** transfers that contains scatter/gather entries that cross
12060	** a 16 MB boundary.
12061	** We use a different scatter function for 896 rev. 1 that needs
12062	** such a work-around. Doing so, we do not affect performance for
12063	** other chips.
12064	** This problem should not be triggered for disk IOs under Linux,
12065	** since such IOs are performed using pages and buffers that are
12066	** nicely power-of-two sized and aligned. But, since this may change
12067	** at any time, a work-around was required.
12068	*/
12069	static int ncr_scatter_896R1(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd)
12070	{
12071	int segn;
12072	int use_sg = (int) cmd->use_sg;
12073
12074	cp->data_len = 0;
12075
12076	if (!use_sg)
12077	segn = ncr_scatter_no_sglist(np, cp, cmd);
12078	else if (use_sg > MAX_SCATTER((127)))
12079	segn = -1;
12080	else {
12081	struct scatterlist scatter = (struct scatterlist )cmd->buffer;
12082	struct scr_tblmove *data;
12083
12084	use_sg = map_scsi_sg_data(np, cmd)((cmd)->use_sg);
12085	data = &cp->phys.data[MAX_SCATTER((127)) - use_sg];
12086
12087	for (segn = 0; segn < use_sg; segn++) {
12088	u_longunsigned long baddr = scsi_sg_dma_address(&scatter[segn])virt_to_phys((&scatter[segn])->address);
12089	unsigned int len = scsi_sg_dma_len(&scatter[segn])((&scatter[segn])->length);
12090
12091	SCATTER_ONE(&data[segn],(&data[segn])->addr = (baddr); (&data[segn])->size = (len);
12092	baddr,(&data[segn])->addr = (baddr); (&data[segn])->size = (len);
12093	len)(&data[segn])->addr = (baddr); (&data[segn])->size = (len);;
12094	if (CROSS_16MB(baddr, scatter[segn].length)(((((unsigned long) baddr) + scatter[segn].length - 1) ^ ((unsigned long) baddr)) & ~0xffffff)) {
12095	cp->host_flagsphys.header.status[3] \|= HF_PM_TO_C(1u<<6);
12096	#ifdef DEBUG_896R1
12097	printk("He! we are crossing a 16 MB boundary (0x%lx, 0x%x)\n",
12098	baddr, scatter[segn].length);
12099	#endif
12100	}
12101	cp->data_len += len;
12102	}
12103	}
12104
12105	return segn;
12106	}
12107
12108	static int ncr_scatter(ncb_p np, ccb_p cp, Scsi_Cmnd *cmd)
12109	{
12110	int segment;
12111	int use_sg = (int) cmd->use_sg;
12112
12113	cp->data_len = 0;
12114
12115	if (!use_sg)
12116	segment = ncr_scatter_no_sglist(np, cp, cmd);
12117	else if (use_sg > MAX_SCATTER((127)))
12118	segment = -1;
12119	else {
12120	struct scatterlist scatter = (struct scatterlist )cmd->buffer;
12121	struct scr_tblmove *data;
12122
12123	use_sg = map_scsi_sg_data(np, cmd)((cmd)->use_sg);
12124	data = &cp->phys.data[MAX_SCATTER((127)) - use_sg];
12125
12126	for (segment = 0; segment < use_sg; segment++) {
12127	u_longunsigned long baddr = scsi_sg_dma_address(&scatter[segment])virt_to_phys((&scatter[segment])->address);
12128	unsigned int len = scsi_sg_dma_len(&scatter[segment])((&scatter[segment])->length);
12129
12130	SCATTER_ONE(&data[segment],(&data[segment])->addr = (baddr); (&data[segment]) ->size = (len);
12131	baddr,(&data[segment])->addr = (baddr); (&data[segment]) ->size = (len);
12132	len)(&data[segment])->addr = (baddr); (&data[segment]) ->size = (len);;
12133	cp->data_len += len;
12134	}
12135	}
12136
12137	return segment;
12138	}
12139
12140	/*==========================================================
12141	**
12142	**
12143	** Test the pci bus snoop logic :-(
12144	**
12145	** Has to be called with interrupts disabled.
12146	**
12147	**
12148	**==========================================================
12149	*/
12150
12151	#ifndef SCSI_NCR_IOMAPPED
12152	static int __init ncr_regtest (struct ncb* np)
12153	{
12154	register volatile u_int32 data;
12155	/*
12156	** ncr registers may NOT be cached.
12157	** write 0xffffffff to a read only register area,
12158	** and try to read it back.
12159	*/
12160	data = 0xffffffff;
12161	OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dstat))))) = ((data)));
12162	data = INL_OFF(offsetof(struct ncr_reg, nc_dstat))((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dstat)))));
12163	#if 1
12164	if (data == 0xffffffff) {
12165	#else
12166	if ((data & 0xe2f0fffd) != 0x02000080) {
12167	#endif
12168	printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
12169	(unsigned) data);
12170	return (0x10);
12171	};
12172	return (0);
12173	}
12174	#endif
12175
12176	static int __init ncr_snooptest (struct ncb* np)
12177	{
12178	u_int32 ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc;
12179	int i, err=0;
12180	#ifndef SCSI_NCR_IOMAPPED
12181	if (np->reg) {
12182	err \|= ncr_regtest (np);
12183	if (err) return (err);
12184	}
12185	#endif
12186	/*
12187	** init
12188	*/
12189	pc = NCB_SCRIPTH0_PHYS (np, snooptest)(np->p_scripth0+((size_t) (&((struct scripth *)0)-> snooptest)));
12190	host_wr = 1;
12191	ncr_wr = 2;
12192	/*
12193	** Set memory and register.
12194	*/
12195	np->ncr_cache = cpu_to_scr(host_wr)(host_wr);
12196	OUTL (nc_temp, ncr_wr)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_temp))))) = (((ncr_wr))));
12197	/*
12198	** Start script (exchange values)
12199	*/
12200	OUTL (nc_dsa, np->p_ncb)(((volatile unsigned int ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_dsa))))) = (((np->p_ncb ))));
12201	OUTL_DSP (pc)do { do { ; } while(0); (((volatile unsigned int ) ((char * )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_dsp ))))) = ((((pc))))); } while (0);
12202	/*
12203	** Wait 'til done (with timeout)
12204	*/
12205	for (i=0; i<NCR_SNOOP_TIMEOUT(1000000); i++)
12206	if (INB(nc_istat)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_istat))))) & (INTF0x04\|SIP0x02\|DIP0x01))
12207	break;
12208	/*
12209	** Save termination position.
12210	*/
12211	pc = INL (nc_dsp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_dsp)))));
12212	/*
12213	** Read memory and register.
12214	*/
12215	host_rd = scr_to_cpu(np->ncr_cache)(np->ncr_cache);
12216	ncr_rd = INL (nc_scratcha)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_scratcha)))));
12217	ncr_bk = INL (nc_temp)((volatile unsigned int ) ((char )np->reg + (((size_t) ( &((struct ncr_reg )0)->nc_temp)))));
12218
12219	/*
12220	** check for timeout
12221	*/
12222	if (i>=NCR_SNOOP_TIMEOUT(1000000)) {
12223	printk ("CACHE TEST FAILED: timeout.\n");
12224	return (0x20);
12225	};
12226	/*
12227	** Check termination position.
12228	*/
12229	if (pc != NCB_SCRIPTH0_PHYS (np, snoopend)(np->p_scripth0+((size_t) (&((struct scripth *)0)-> snoopend)))+8) {
12230	printk ("CACHE TEST FAILED: script execution failed.\n");
12231	printk ("start=%08lx, pc=%08lx, end=%08lx\n",
12232	(u_longunsigned long) NCB_SCRIPTH0_PHYS (np, snooptest)(np->p_scripth0+((size_t) (&((struct scripth *)0)-> snooptest))), (u_longunsigned long) pc,
12233	(u_longunsigned long) NCB_SCRIPTH0_PHYS (np, snoopend)(np->p_scripth0+((size_t) (&((struct scripth *)0)-> snoopend))) +8);
12234	return (0x40);
12235	};
12236	/*
12237	** Show results.
12238	*/
12239	if (host_wr != ncr_rd) {
12240	printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n",
12241	(int) host_wr, (int) ncr_rd);
12242	err \|= 1;
12243	};
12244	if (host_rd != ncr_wr) {
12245	printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n",
12246	(int) ncr_wr, (int) host_rd);
12247	err \|= 2;
12248	};
12249	if (ncr_bk != ncr_wr) {
12250	printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n",
12251	(int) ncr_wr, (int) ncr_bk);
12252	err \|= 4;
12253	};
12254	return (err);
12255	}
12256
12257	/*==========================================================
12258	**
12259	** Determine the ncr's clock frequency.
12260	** This is essential for the negotiation
12261	** of the synchronous transfer rate.
12262	**
12263	**==========================================================
12264	**
12265	** Note: we have to return the correct value.
12266	** THERE IS NO SAFE DEFAULT VALUE.
12267	**
12268	** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
12269	** 53C860 and 53C875 rev. 1 support fast20 transfers but
12270	** do not have a clock doubler and so are provided with a
12271	** 80 MHz clock. All other fast20 boards incorporate a doubler
12272	** and so should be delivered with a 40 MHz clock.
12273	** The recent fast40 chips (895/896/895A) and the
12274	** fast80 chip (C1010) use a 40 Mhz base clock
12275	** and provide a clock quadrupler (160 Mhz). The code below
12276	** tries to deal as cleverly as possible with all this stuff.
12277	**
12278	**----------------------------------------------------------
12279	*/
12280
12281	/*
12282	* Select NCR SCSI clock frequency
12283	*/
12284	static void ncr_selectclock(ncb_p np, u_charunsigned char scntl3)
12285	{
12286	if (np->multiplier < 2) {
12287	OUTB(nc_scntl3, scntl3)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl3))))) = (((scntl3) )));
12288	return;
12289	}
12290
12291	if (bootverbose(np->verbose) >= 2)
12292	printk ("%s: enabling clock multiplier\n", ncr_name(np));
12293
12294	OUTB(nc_stest1, DBLEN)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest1))))) = (((0x08))) ); /* Enable clock multiplier */
12295
12296	if ( (np->device_id != PCI_DEVICE_ID_LSI_53C10100x20) &&
12297	(np->device_id != PCI_DEVICE_ID_LSI_53C1010_660x21) &&
12298	(np->multiplier > 2)) {
12299	int i = 20; /* Poll bit 5 of stest4 for quadrupler */
12300	while (!(INB(nc_stest4)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_stest4))))) & LCKFRQ0x20) && --i > 0)
12301	UDELAY (20);
12302	if (!i)
12303	printk("%s: the chip cannot lock the frequency\n",
12304	ncr_name(np));
12305
12306	} else /* Wait 120 micro-seconds for multiplier*/
12307	UDELAY (120);
12308
12309	OUTB(nc_stest3, HSC)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x20))) ); /* Halt the scsi clock */
12310	OUTB(nc_scntl3, scntl3)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl3))))) = (((scntl3) )));
12311	OUTB(nc_stest1, (DBLEN\|DBLSEL))(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest1))))) = ((((0x08\|0x04 )))));/* Select clock multiplier */
12312	OUTB(nc_stest3, 0x00)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest3))))) = (((0x00))) ); /* Restart scsi clock */
12313	}
12314
12315
12316	/*
12317	* calculate NCR SCSI clock frequency (in KHz)
12318	*/
12319	static unsigned __init ncrgetfreq (ncb_p np, int gen)
12320	{
12321	unsigned int ms = 0;
12322	unsigned int f;
12323	int count;
12324
12325	/*
12326	* Measure GEN timer delay in order
12327	* to calculate SCSI clock frequency
12328	*
12329	* This code will never execute too
12330	* many loop iterations (if DELAY is
12331	* reasonably correct). It could get
12332	* too low a delay (too high a freq.)
12333	* if the CPU is slow executing the
12334	* loop for some reason (an NMI, for
12335	* example). For this reason we will
12336	* if multiple measurements are to be
12337	* performed trust the higher delay
12338	* (lower frequency returned).
12339	*/
12340	OUTW (nc_sien , 0x0)(((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sien))))) = (((0x0))));/* mask all scsi interrupts */
12341	/* enable general purpose timer */
12342	(void) INW (nc_sist)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sist))))); /* clear pending scsi interrupt */
12343	OUTB (nc_dien , 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_dien))))) = (((0)))); /* mask all dma interrupts */
12344	(void) INW (nc_sist)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sist))))); /* another one, just to be sure :) */
12345	OUTB (nc_scntl3, 4)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl3))))) = (((4)))); /* set pre-scaler to divide by 3 */
12346	OUTB (nc_stime1, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stime1))))) = (((0)))); /* disable general purpose timer */
12347	OUTB (nc_stime1, gen)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stime1))))) = (((gen)))); /* set to nominal delay of 1<<gen * 125us */
12348	/* Temporary fix for udelay issue with Alpha
12349	platform */
12350	while (!(INW(nc_sist)((volatile unsigned short ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_sist))))) & GEN0x0200) && ms++ < 100000) {
12351	/* count 1ms */
12352	for (count = 0; count < 10; count++)
12353	UDELAY (100);
12354	}
12355	OUTB (nc_stime1, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stime1))))) = (((0)))); /* disable general purpose timer */
12356	/*
12357	* set prescaler to divide by whatever 0 means
12358	* 0 ought to choose divide by 2, but appears
12359	* to set divide by 3.5 mode in my 53c810 ...
12360	*/
12361	OUTB (nc_scntl3, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_scntl3))))) = (((0))));
12362
12363	/*
12364	* adjust for prescaler, and convert into KHz
12365	* scale values derived empirically. C1010 uses
12366	* different dividers
12367	*/
12368	#if 0
12369	if (np->device_id == PCI_DEVICE_ID_LSI_53C10100x20)
12370	f = ms ? ((1 << gen) * 2866 ) / ms : 0;
12371	else
12372	#endif
12373	f = ms ? ((1 << gen) * 4340) / ms : 0;
12374
12375	if (bootverbose(np->verbose) >= 2)
12376	printk ("%s: Delay (GEN=%d): %u msec, %u KHz\n",
12377	ncr_name(np), gen, ms, f);
12378
12379	return f;
12380	}
12381
12382	static unsigned __init ncr_getfreq (ncb_p np)
12383	{
12384	u_intunsigned int f1, f2;
12385	int gen = 11;
12386
12387	(void) ncrgetfreq (np, gen); /* throw away first result */
12388	f1 = ncrgetfreq (np, gen);
12389	f2 = ncrgetfreq (np, gen);
12390	if (f1 > f2) f1 = f2; /* trust lower result */
12391	return f1;
12392	}
12393
12394	/*
12395	* Get/probe NCR SCSI clock frequency
12396	*/
12397	static void __init ncr_getclock (ncb_p np, int mult)
12398	{
12399	unsigned char scntl3 = np->sv_scntl3;
12400	unsigned char stest1 = np->sv_stest1;
12401	unsigned f1;
12402
12403	np->multiplier = 1;
12404	f1 = 40000;
12405
12406	/*
12407	** True with 875/895/896/895A with clock multiplier selected
12408	*/
12409	if (mult > 1 && (stest1 & (DBLEN0x08+DBLSEL0x04)) == DBLEN0x08+DBLSEL0x04) {
12410	if (bootverbose(np->verbose) >= 2)
12411	printk ("%s: clock multiplier found\n", ncr_name(np));
12412	np->multiplier = mult;
12413	}
12414
12415	/*
12416	** If multiplier not found but a C1010, assume a mult of 4.
12417	** If multiplier not found or scntl3 not 7,5,3,
12418	** reset chip and get frequency from general purpose timer.
12419	** Otherwise trust scntl3 BIOS setting.
12420	*/
12421	if ((np->device_id == PCI_DEVICE_ID_LSI_53C10100x20) \|\|
12422	(np->device_id == PCI_DEVICE_ID_LSI_53C1010_660x21)) {
12423	f1=40000;
12424	np->multiplier = mult;
12425	if (bootverbose(np->verbose) >= 2)
12426	printk ("%s: clock multiplier assumed\n", ncr_name(np));
12427	}
12428	else if (np->multiplier != mult \|\| (scntl3 & 7) < 3 \|\| !(scntl3 & 1)) {
12429	OUTB (nc_stest1, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest1))))) = (((0)))); /* make sure doubler is OFF */
12430	f1 = ncr_getfreq (np);
12431
12432	if (bootverbose(np->verbose))
12433	printk ("%s: NCR clock is %uKHz\n", ncr_name(np), f1);
12434
12435	if (f1 < 55000) f1 = 40000;
12436	else f1 = 80000;
12437
12438	/*
12439	** Suggest to also check the PCI clock frequency
12440	** to make sure our frequency calculation algorithm
12441	** is not too biased.
12442	*/
12443	if (np->features & FE_66MHZ(1<<23)) {
12444	np->pciclock_min = (66000*55+80-1)/80;
12445	np->pciclock_max = (66000*55)/40;
12446	}
12447	else {
12448	np->pciclock_min = (33000*55+80-1)/80;
12449	np->pciclock_max = (33000*55)/40;
12450	}
12451
12452	if (f1 == 40000 && mult > 1) {
12453	if (bootverbose(np->verbose) >= 2)
12454	printk ("%s: clock multiplier assumed\n", ncr_name(np));
12455	np->multiplier = mult;
12456	}
12457	} else {
12458	if ((scntl3 & 7) == 3) f1 = 40000;
12459	else if ((scntl3 & 7) == 5) f1 = 80000;
12460	else f1 = 160000;
12461
12462	f1 /= np->multiplier;
12463	}
12464
12465	/*
12466	** Compute controller synchronous parameters.
12467	*/
12468	f1 *= np->multiplier;
12469	np->clock_khz = f1;
12470	}
12471
12472	/*
12473	* Get/probe PCI clock frequency
12474	*/
12475	static u_intunsigned int __init ncr_getpciclock (ncb_p np)
12476	{
12477	static u_intunsigned int f;
12478
12479	OUTB (nc_stest1, SCLK)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest1))))) = (((0x80))) ); /* Use the PCI clock as SCSI clock */
12480	f = ncr_getfreq (np);
12481	OUTB (nc_stest1, 0)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_stest1))))) = (((0))));
12482
12483	return f;
12484	}
12485
12486	/===================== LINUX ENTRY POINTS SECTION ==========================/
12487
12488	#ifndef ucharunsigned char
12489	#define ucharunsigned char unsigned char
12490	#endif
12491
12492	#ifndef ushortunsigned short
12493	#define ushortunsigned short unsigned short
12494	#endif
12495
12496	#ifndef ulongunsigned long
12497	#define ulongunsigned long unsigned long
12498	#endif
12499
12500	/* ---------------------------------------------------------------------
12501	**
12502	** Driver setup from the boot command line
12503	**
12504	** ---------------------------------------------------------------------
12505	*/
12506
12507	#ifdef MODULE
12508	#define ARG_SEP',' ' '
12509	#else
12510	#define ARG_SEP',' ','
12511	#endif
12512
12513	#define OPT_TAGS1 1
12514	#define OPT_MASTER_PARITY2 2
12515	#define OPT_SCSI_PARITY3 3
12516	#define OPT_DISCONNECTION4 4
12517	#define OPT_SPECIAL_FEATURES5 5
12518	#define OPT_ULTRA_SCSI6 6
12519	#define OPT_FORCE_SYNC_NEGO7 7
12520	#define OPT_REVERSE_PROBE8 8
12521	#define OPT_DEFAULT_SYNC9 9
12522	#define OPT_VERBOSE10 10
12523	#define OPT_DEBUG11 11
12524	#define OPT_BURST_MAX12 12
12525	#define OPT_LED_PIN13 13
12526	#define OPT_MAX_WIDE14 14
12527	#define OPT_SETTLE_DELAY15 15
12528	#define OPT_DIFF_SUPPORT16 16
12529	#define OPT_IRQM17 17
12530	#define OPT_PCI_FIX_UP18 18
12531	#define OPT_BUS_CHECK19 19
12532	#define OPT_OPTIMIZE20 20
12533	#define OPT_RECOVERY21 21
12534	#define OPT_SAFE_SETUP22 22
12535	#define OPT_USE_NVRAM23 23
12536	#define OPT_EXCLUDE24 24
12537	#define OPT_HOST_ID25 25
12538
12539	#ifdef SCSI_NCR_IARB_SUPPORT
12540	#define OPT_IARB 26
12541	#endif
12542
12543	static char setup_token[] __initdata =
12544	"tags:" "mpar:"
12545	"spar:" "disc:"
12546	"specf:" "ultra:"
12547	"fsn:" "revprob:"
12548	"sync:" "verb:"
12549	"debug:" "burst:"
12550	"led:" "wide:"
12551	"settle:" "diff:"
12552	"irqm:" "pcifix:"
12553	"buschk:" "optim:"
12554	"recovery:"
12555	"safe:" "nvram:"
12556	"excl:" "hostid:"
12557	#ifdef SCSI_NCR_IARB_SUPPORT
12558	"iarb:"
12559	#endif
12560	; /* DONNOT REMOVE THIS ';' */
12561
12562	#ifdef MODULE
12563	#define ARG_SEP',' ' '
12564	#else
12565	#define ARG_SEP',' ','
12566	#endif
12567
12568	static int __init get_setup_token(char *p)
12569	{
12570	char *cur = setup_token;
12571	char *pc;
12572	int i = 0;
12573
12574	while (cur != NULL((void ) 0) && (pc = strchr(cur, ':')) != NULL((void ) 0)) {
12575	++pc;
12576	++i;
12577	if (!strncmp(p, cur, pc - cur))
12578	return i;
12579	cur = pc;
12580	}
12581	return 0;
12582	}
12583
12584
12585	int __init sym53c8xx_setup(char *str)
12586	{
12587	#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
12588	char *cur = str;
12589	char pc, pv;
12590	unsigned long val;
12591	int i, c;
12592	int xi = 0;
12593
12594	while (cur != NULL((void ) 0) && (pc = strchr(cur, ':')) != NULL((void ) 0)) {
12595	char *pe;
12596
12597	val = 0;
12598	pv = pc;
12599	c = *++pv;
12600
12601	if (c == 'n')
12602	val = 0;
12603	else if (c == 'y')
12604	val = 1;
12605	else
12606	val = (int) simple_strtoul(pv, &pe, 0);
12607
12608	switch (get_setup_token(cur)) {
12609	case OPT_TAGS1:
12610	driver_setup.default_tags = val;
12611	if (pe && *pe == '/') {
12612	i = 0;
12613	while (pe && pe != ARG_SEP',' &&
12614	i < sizeof(driver_setup.tag_ctrl)-1) {
12615	driver_setup.tag_ctrl[i++] = *pe++;
12616	}
12617	driver_setup.tag_ctrl[i] = '\0';
12618	}
12619	break;
12620	case OPT_MASTER_PARITY2:
12621	driver_setup.master_parity = val;
12622	break;
12623	case OPT_SCSI_PARITY3:
12624	driver_setup.scsi_parity = val;
12625	break;
12626	case OPT_DISCONNECTION4:
12627	driver_setup.disconnection = val;
12628	break;
12629	case OPT_SPECIAL_FEATURES5:
12630	driver_setup.special_features = val;
12631	break;
12632	case OPT_ULTRA_SCSI6:
12633	driver_setup.ultra_scsi = val;
12634	break;
12635	case OPT_FORCE_SYNC_NEGO7:
12636	driver_setup.force_sync_nego = val;
12637	break;
12638	case OPT_REVERSE_PROBE8:
12639	driver_setup.reverse_probe = val;
12640	break;
12641	case OPT_DEFAULT_SYNC9:
12642	driver_setup.default_sync = val;
12643	break;
12644	case OPT_VERBOSE10:
12645	driver_setup.verbose = val;
12646	break;
12647	case OPT_DEBUG11:
12648	driver_setup.debug = val;
12649	break;
12650	case OPT_BURST_MAX12:
12651	driver_setup.burst_max = val;
12652	break;
12653	case OPT_LED_PIN13:
12654	driver_setup.led_pin = val;
12655	break;
12656	case OPT_MAX_WIDE14:
12657	driver_setup.max_wide = val? 1:0;
12658	break;
12659	case OPT_SETTLE_DELAY15:
12660	driver_setup.settle_delay = val;
12661	break;
12662	case OPT_DIFF_SUPPORT16:
12663	driver_setup.diff_support = val;
12664	break;
12665	case OPT_IRQM17:
12666	driver_setup.irqm = val;
12667	break;
12668	case OPT_PCI_FIX_UP18:
12669	driver_setup.pci_fix_up = val;
12670	break;
12671	case OPT_BUS_CHECK19:
12672	driver_setup.bus_check = val;
12673	break;
12674	case OPT_OPTIMIZE20:
12675	driver_setup.optimize = val;
12676	break;
12677	case OPT_RECOVERY21:
12678	driver_setup.recovery = val;
12679	break;
12680	case OPT_USE_NVRAM23:
12681	driver_setup.use_nvram = val;
12682	break;
12683	case OPT_SAFE_SETUP22:
12684	memcpy(&driver_setup, &driver_safe_setup,(__builtin_constant_p(sizeof(driver_setup)) ? __constant_memcpy ((&driver_setup),(&driver_safe_setup),(sizeof(driver_setup ))) : __memcpy((&driver_setup),(&driver_safe_setup),( sizeof(driver_setup))))
12685	sizeof(driver_setup))(__builtin_constant_p(sizeof(driver_setup)) ? __constant_memcpy ((&driver_setup),(&driver_safe_setup),(sizeof(driver_setup ))) : __memcpy((&driver_setup),(&driver_safe_setup),( sizeof(driver_setup))));
12686	break;
12687	case OPT_EXCLUDE24:
12688	if (xi < SCSI_NCR_MAX_EXCLUDES8)
12689	driver_setup.excludes[xi++] = val;
12690	break;
12691	case OPT_HOST_ID25:
12692	driver_setup.host_id = val;
12693	break;
12694	#ifdef SCSI_NCR_IARB_SUPPORT
12695	case OPT_IARB:
12696	driver_setup.iarb = val;
12697	break;
12698	#endif
12699	default:
12700	printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
12701	break;
12702	}
12703
12704	if ((cur = strchr(cur, ARG_SEP',')) != NULL((void *) 0))
12705	++cur;
12706	}
12707	#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
12708	return 1;
12709	}
12710
12711	#if LINUX_VERSION_CODE131108 >= LinuxVersionCode(2,3,13)(((2)<<16)+((3)<<8)+(13))
12712	#ifndef MODULE
12713	__setup("sym53c8xx=", sym53c8xx_setup);
12714	#endif
12715	#endif
12716
12717	static int
12718	sym53c8xx_pci_init(Scsi_Host_Template tpnt, pcidev_t pdev, ncr_device device);
12719
12720	/*
12721	** Linux entry point for SYM53C8XX devices detection routine.
12722	**
12723	** Called by the middle-level scsi drivers at initialization time,
12724	** or at module installation.
12725	**
12726	** Read the PCI configuration and try to attach each
12727	** detected NCR board.
12728	**
12729	** If NVRAM is present, try to attach boards according to
12730	** the used defined boot order.
12731	**
12732	** Returns the number of boards successfully attached.
12733	*/
12734
12735	static void __init ncr_print_driver_setup(void)
12736	{
12737	#define YesNo(y) y ? 'y' : 'n'
12738	printk (NAME53C8XX"sym53c8xx" ": setup=disc:%c,specf:%d,ultra:%d,tags:%d,sync:%d,"
12739	"burst:%d,wide:%c,diff:%d,revprob:%c,buschk:0x%x\n",
12740	YesNo(driver_setup.disconnection),
12741	driver_setup.special_features,
12742	driver_setup.ultra_scsi,
12743	driver_setup.default_tags,
12744	driver_setup.default_sync,
12745	driver_setup.burst_max,
12746	YesNo(driver_setup.max_wide),
12747	driver_setup.diff_support,
12748	YesNo(driver_setup.reverse_probe),
12749	driver_setup.bus_check);
12750
12751	printk (NAME53C8XX"sym53c8xx" ": setup=mpar:%c,spar:%c,fsn=%c,verb:%d,debug:0x%x,"
12752	"led:%c,settle:%d,irqm:0x%x,nvram:0x%x,pcifix:0x%x\n",
12753	YesNo(driver_setup.master_parity),
12754	YesNo(driver_setup.scsi_parity),
12755	YesNo(driver_setup.force_sync_nego),
12756	driver_setup.verbose,
12757	driver_setup.debug,
12758	YesNo(driver_setup.led_pin),
12759	driver_setup.settle_delay,
12760	driver_setup.irqm,
12761	driver_setup.use_nvram,
12762	driver_setup.pci_fix_up);
12763	#undef YesNo
12764	}
12765
12766	/*===================================================================
12767	** SYM53C8XX devices description table and chip ids list.
12768	**===================================================================
12769	*/
12770
12771	static ncr_chip ncr_chip_table[] __initdata = SCSI_NCR_CHIP_TABLE{ {0x0001, 0x0f, "810", 4, 8, 4, (1<<6)} , {0x0001, 0xff , "810a", 4, 8, 4, ((1<<6)\|(1<<7)\|(1<<8)\|(1 <<9))\|(1<<13)\|(1<<12)\|(1<<10)} , {0x0004 , 0xff, "815", 4, 8, 4, (1<<6)\|(1<<10)} , {0x0002 , 0xff, "820", 4, 8, 4, (1<<1)\|(1<<6)} , {0x0003, 0x0f, "825", 4, 8, 4, (1<<1)\|(1<<6)\|(1<<10 )\|(1<<21)} , {0x0003, 0xff, "825a", 6, 8, 4, (1<< 1)\|(((1<<6)\|(1<<7)\|(1<<8)\|(1<<9)) & ~(1<<6))\|(1<<10)\|(1<<11)\|(1<<13)\|(1<< 12)\|(1<<14)\|(1<<21)} , {0x0006, 0xff, "860", 4, 8 , 5, (1<<2)\|(1<<15)\|((1<<6)\|(1<<7)\|(1 <<8)\|(1<<9))\|(1<<10)\|(1<<13)\|(1<< 12)} , {0x000f, 0x01, "875", 6, 16, 5, (1<<1)\|(1<< 2)\|(1<<15)\|(((1<<6)\|(1<<7)\|(1<<8)\|(1<< 9)) & ~(1<<6))\|(1<<10)\|(1<<11)\|(1<< 13)\|(1<<12)\| (1<<14)\|(1<<21)} , {0x000f, 0x0f , "875", 6, 16, 5, (1<<1)\|(1<<2)\|(1<<4)\|((( 1<<6)\|(1<<7)\|(1<<8)\|(1<<9)) & ~(1 <<6))\|(1<<10)\|(1<<11)\|(1<<13)\|(1<< 12)\| (1<<14)\|(1<<21)} , {0x000f, 0x1f, "876", 6, 16 , 5, (1<<1)\|(1<<2)\|(1<<4)\|(((1<<6)\|(1 <<7)\|(1<<8)\|(1<<9)) & ~(1<<6))\|(1 <<10)\|(1<<11)\|(1<<13)\|(1<<12)\| (1<< 14)\|(1<<21)} , {0x000f, 0x2f, "875E", 6, 16, 5, (1<< 1)\|(1<<2)\|(1<<4)\|(((1<<6)\|(1<<7)\|(1<< 8)\|(1<<9)) & ~(1<<6))\|(1<<10)\|(1<< 11)\|(1<<13)\|(1<<12)\| (1<<14)\|(1<<21)} , {0x000f, 0xff, "876", 6, 16, 5, (1<<1)\|(1<<2)\| (1<<4)\|(((1<<6)\|(1<<7)\|(1<<8)\|(1<< 9)) & ~(1<<6))\|(1<<10)\|(1<<11)\|(1<< 13)\|(1<<12)\| (1<<14)\|(1<<21)} , {0x008f,0xff , "875J", 6, 16, 5, (1<<1)\|(1<<2)\|(1<<4)\|(( (1<<6)\|(1<<7)\|(1<<8)\|(1<<9)) & ~( 1<<6))\|(1<<10)\|(1<<11)\|(1<<13)\|(1<< 12)\| (1<<14)} , {0x000d, 0xff, "885", 6, 16, 5, (1<< 1)\|(1<<2)\|(1<<4)\|(((1<<6)\|(1<<7)\|(1<< 8)\|(1<<9)) & ~(1<<6))\|(1<<10)\|(1<< 11)\|(1<<13)\|(1<<12)\| (1<<14)\|(1<<21)} , {0x000c, 0xff, "895", 6, 31, 7, (1<<1)\|(1<<3)\| (1<<5)\|((1<<6)\|(1<<7)\|(1<<8)\|(1<< 9))\|(1<<10)\|(1<<11)\|(1<<13)\|(1<<12)\| ( 1<<14)} , {0x000b, 0xff, "896", 6, 31, 7, (1<<1)\| (1<<3)\|(1<<5)\|((1<<6)\|(1<<7)\|(1<< 8)\|(1<<9))\|(1<<10)\|(1<<11)\|(1<<13)\|(1 <<12)\| (1<<14)\|(1<<16)\|(1<<17)\|(1<< 18)\|(1<<19)\|(1<<20)} , {0x12, 0xff, "895a", 6, 31 , 7, (1<<1)\|(1<<3)\|(1<<5)\|((1<<6)\|(1<< 7)\|(1<<8)\|(1<<9))\|(1<<10)\|(1<<11)\|(1<< 13)\|(1<<12)\| (1<<14)\|(1<<16)\|(1<<17)\| (1<<18)\|(1<<19)\|(1<<20)} , {0xa, 0xff, "1510D" , 7, 31, 7, (1<<1)\|(1<<3)\|(1<<5)\|((1<< 6)\|(1<<7)\|(1<<8)\|(1<<9))\|(1<<10)\|(1<< 11)\|(1<<13)\|(1<<12)\| (1<<14)\|(1<<18)} , {0x20, 0xff, "1010", 6, 31, 7, (1<<1)\|(1<<5)\|( (1<<6)\|(1<<7)\|(1<<8)\|(1<<9))\|(1<< 10)\|(1<<11)\|(1<<13)\|(1<<12)\| (1<<14)\| (1<<16)\|(1<<17)\|(1<<18)\|(1<<19)\|(1<< 20)\|(1<<22)} , {0x21, 0xff, "1010_66", 6, 31, 7, (1<< 1)\|(1<<5)\|((1<<6)\|(1<<7)\|(1<<8)\|(1<< 9))\|(1<<10)\|(1<<11)\|(1<<13)\|(1<<12)\| ( 1<<14)\|(1<<16)\|(1<<17)\|(1<<18)\|(1<< 19)\|(1<<20)\|(1<<22)\|(1<<23)} };
12772	static ushortunsigned short ncr_chip_ids[] __initdata = SCSI_NCR_CHIP_IDS{ 0x0001, 0x0004, 0x0002, 0x0003, 0x0006, 0x000f, 0x008f, 0x000d , 0x000c, 0x000b, 0x12, 0xa, 0x20, 0x21 };
12773
12774	#ifdef SCSI_NCR_PQS_PDS_SUPPORT
12775	/*===================================================================
12776	** Detect all NCR PQS/PDS boards and keep track of their bus nr.
12777	**
12778	** The NCR PQS or PDS card is constructed as a DEC bridge
12779	** behind which sit a proprietary NCR memory controller and
12780	** four or two 53c875s as separate devices. In its usual mode
12781	** of operation, the 875s are slaved to the memory controller
12782	** for all transfers. We can tell if an 875 is part of a
12783	** PQS/PDS or not since if it is, it will be on the same bus
12784	** as the memory controller. To operate with the Linux
12785	** driver, the memory controller is disabled and the 875s
12786	** freed to function independently. The only wrinkle is that
12787	** the preset SCSI ID (which may be zero) must be read in from
12788	** a special configuration space register of the 875
12789	**===================================================================
12790	*/
12791	#define SCSI_NCR_MAX_PQS_BUS 16
12792	static int pqs_bus[SCSI_NCR_MAX_PQS_BUS] __initdata = { 0 };
12793
12794	static void __init ncr_detect_pqs_pds(void)
12795	{
12796	short index;
12797	pcidev_t dev = PCIDEV_NULL(~0u);
12798
12799	for(index=0; index < SCSI_NCR_MAX_PQS_BUS; index++) {
12800	u_charunsigned char tmp;
12801
12802	dev = pci_find_device(0x101a, 0x0009, dev);
12803	if (dev == PCIDEV_NULL(~0u)) {
12804	pqs_bus[index] = -1;
12805	break;
12806	}
12807	printk(KERN_INFO"<6>" NAME53C8XX"sym53c8xx" ": NCR PQS/PDS memory controller detected on bus %d\n", PciBusNumber(dev)((dev)>>8));
12808	pci_read_config_byte(dev, 0x44, &tmp)pcibios_read_config_byte(((dev)>>8), ((dev)&0xff), 0x44 , &tmp);
12809	/* bit 1: allow individual 875 configuration */
12810	tmp \|= 0x2;
12811	pci_write_config_byte(dev, 0x44, tmp)pcibios_write_config_byte(((dev)>>8), ((dev)&0xff), 0x44, tmp);
12812	pci_read_config_byte(dev, 0x45, &tmp)pcibios_read_config_byte(((dev)>>8), ((dev)&0xff), 0x45 , &tmp);
12813	/* bit 2: drive individual 875 interrupts to the bus */
12814	tmp \|= 0x4;
12815	pci_write_config_byte(dev, 0x45, tmp)pcibios_write_config_byte(((dev)>>8), ((dev)&0xff), 0x45, tmp);
12816
12817	pqs_bus[index] = PciBusNumber(dev)((dev)>>8);
12818	}
12819	}
12820	#endif /* SCSI_NCR_PQS_PDS_SUPPORT */
12821
12822	/*===================================================================
12823	** Detect all 53c8xx hosts and then attach them.
12824	**
12825	** If we are using NVRAM, once all hosts are detected, we need to
12826	** check any NVRAM for boot order in case detect and boot order
12827	** differ and attach them using the order in the NVRAM.
12828	**
12829	** If no NVRAM is found or data appears invalid attach boards in
12830	** the the order they are detected.
12831	**===================================================================
12832	*/
12833	int __init sym53c8xx_detect(Scsi_Host_Template *tpnt)
12834	{
12835	pcidev_t pcidev;
12836	int i, j, chips, hosts, count;
12837	int attach_count = 0;
12838	ncr_device devtbl, devp;
12839	#ifdef SCSI_NCR_NVRAM_SUPPORT
12840	ncr_nvram nvram0, nvram, *nvp;
12841	#endif
12842
12843	/*
12844	** PCI is required.
12845	*/
12846	if (!pci_presentpcibios_present())
12847	return 0;
12848
12849	/*
12850	** Initialize driver general stuff.
12851	*/
12852	#ifdef SCSI_NCR_PROC_INFO_SUPPORT
12853	#if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,3,27)(((2)<<16)+((3)<<8)+(27))
12854	tpnt->proc_dir = &proc_scsi_sym53c8xx;
12855	#else
12856	tpnt->proc_name = NAME53C8XX"sym53c8xx";
12857	#endif
12858	tpnt->proc_info = sym53c8xx_proc_info;
12859	#endif
12860
12861	#if defined(SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT) && defined(MODULE)
12862	if (sym53c8xx)
12863	sym53c8xx_setup(sym53c8xx);
12864	#endif
12865	#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
12866	ncr_debug = driver_setup.debug;
12867	#endif
12868
12869	if (initverbose(driver_setup.verbose) >= 2)
12870	ncr_print_driver_setup();
12871
12872	/*
12873	** Allocate the device table since we donnot want to
12874	** overflow the kernel stack.
12875	** 1 x 4K PAGE is enough for more than 40 devices for i386.
12876	*/
12877	devtbl = m_calloc(PAGE_SIZE(1 << 12), "devtbl");
12878	if (!devtbl)
12879	return 0;
12880
12881	/*
12882	** Detect all NCR PQS/PDS memory controllers.
12883	*/
12884	#ifdef SCSI_NCR_PQS_PDS_SUPPORT
12885	ncr_detect_pqs_pds();
12886	#endif
12887
12888	/*
12889	** Detect all 53c8xx hosts.
12890	** Save the first Symbios NVRAM content if any
12891	** for the boot order.
12892	*/
12893	chips = sizeof(ncr_chip_ids) / sizeof(ncr_chip_ids[0]);
12894	hosts = PAGE_SIZE(1 << 12) / sizeof(*devtbl);
12895	#ifdef SCSI_NCR_NVRAM_SUPPORT
12896	nvp = (driver_setup.use_nvram & 0x1) ? &nvram0 : 0;
12897	#endif
12898	j = 0;
12899	count = 0;
12900	pcidev = PCIDEV_NULL(~0u);
12901	while (1) {
12902	char *msg = "";
12903	if (count >= hosts)
12904	break;
12905	if (j >= chips)
12906	break;
12907	i = driver_setup.reverse_probe ? chips - 1 - j : j;
12908	pcidev = pci_find_device(PCI_VENDOR_ID_NCR0x1000, ncr_chip_ids[i],
12909	pcidev);
12910	if (pcidev == PCIDEV_NULL(~0u)) {
12911	++j;
12912	continue;
12913	}
12914	/* Some HW as the HP LH4 may report twice PCI devices */
12915	for (i = 0; i < count ; i++) {
12916	if (devtbl[i].slot.bus == PciBusNumber(pcidev)((pcidev)>>8) &&
12917	devtbl[i].slot.device_fn == PciDeviceFn(pcidev)((pcidev)&0xff))
12918	break;
12919	}
12920	if (i != count) /* Ignore this device if we already have it */
12921	continue;
12922	devp = &devtbl[count];
12923	devp->host_id = driver_setup.host_id;
12924	devp->attach_done = 0;
12925	if (sym53c8xx_pci_init(tpnt, pcidev, devp)) {
12926	continue;
12927	}
12928	++count;
12929	#ifdef SCSI_NCR_NVRAM_SUPPORT
12930	if (nvp) {
12931	ncr_get_nvram(devp, nvp);
12932	switch(nvp->type) {
12933	case SCSI_NCR_SYMBIOS_NVRAM(1):
12934	/*
12935	* Switch to the other nvram buffer, so that
12936	* nvram0 will contain the first Symbios
12937	* format NVRAM content with boot order.
12938	*/
12939	nvp = &nvram;
12940	msg = "with Symbios NVRAM";
12941	break;
12942	case SCSI_NCR_TEKRAM_NVRAM(2):
12943	msg = "with Tekram NVRAM";
12944	break;
12945	}
12946	}
12947	#endif
12948	#ifdef SCSI_NCR_PQS_PDS_SUPPORT
12949	if (devp->pqs_pds)
12950	msg = "(NCR PQS/PDS)";
12951	#endif
12952	printk(KERN_INFO"<6>" NAME53C8XX"sym53c8xx" ": 53c%s detected %s\n",
12953	devp->chip.name, msg);
12954	}
12955
12956	/*
12957	** If we have found a SYMBIOS NVRAM, use first the NVRAM boot
12958	** sequence as device boot order.
12959	** check devices in the boot record against devices detected.
12960	** attach devices if we find a match. boot table records that
12961	** do not match any detected devices will be ignored.
12962	** devices that do not match any boot table will not be attached
12963	** here but will attempt to be attached during the device table
12964	** rescan.
12965	*/
12966	#ifdef SCSI_NCR_NVRAM_SUPPORT
12967	if (!nvp \|\| nvram0.type != SCSI_NCR_SYMBIOS_NVRAM(1))
12968	goto next;
12969	for (i = 0; i < 4; i++) {
12970	Symbios_host *h = &nvram0.data.Symbios.host[i];
12971	for (j = 0 ; j < count ; j++) {
12972	devp = &devtbl[j];
12973	if (h->device_fn != devp->slot.device_fn \|\|
12974	h->bus_nr != devp->slot.bus \|\|
12975	h->device_id != devp->chip.device_id)
12976	continue;
12977	if (devp->attach_done)
12978	continue;
12979	if (h->flags & SYMBIOS_INIT_SCAN_AT_BOOT(1)) {
12980	ncr_get_nvram(devp, nvp);
12981	if (!ncr_attach (tpnt, attach_count, devp))
12982	attach_count++;
12983	}
12984	else if (!(driver_setup.use_nvram & 0x80))
12985	printk(KERN_INFO"<6>" NAME53C8XX"sym53c8xx"
12986	": 53c%s state OFF thus not attached\n",
12987	devp->chip.name);
12988	else
12989	continue;
12990
12991	devp->attach_done = 1;
12992	break;
12993	}
12994	}
12995	next:
12996	#endif
12997
12998	/*
12999	** Rescan device list to make sure all boards attached.
13000	** Devices without boot records will not be attached yet
13001	** so try to attach them here.
13002	*/
13003	for (i= 0; i < count; i++) {
13004	devp = &devtbl[i];
13005	if (!devp->attach_done) {
13006	#ifdef SCSI_NCR_NVRAM_SUPPORT
13007	ncr_get_nvram(devp, nvp);
13008	#endif
13009	if (!ncr_attach (tpnt, attach_count, devp))
13010	attach_count++;
13011	}
13012	}
13013
13014	m_free(devtbl, PAGE_SIZE(1 << 12), "devtbl");
13015
13016	return attach_count;
13017	}
13018
13019	/*===================================================================
13020	** Read and check the PCI configuration for any detected NCR
13021	** boards and save data for attaching after all boards have
13022	** been detected.
13023	**===================================================================
13024	*/
13025	static int __init
13026	sym53c8xx_pci_init(Scsi_Host_Template tpnt, pcidev_t pdev, ncr_device device)
13027	{
13028	u_shortunsigned short vendor_id, device_id, command, status_reg;
13029	u_charunsigned char cache_line_size, latency_timer;
13030	u_charunsigned char suggested_cache_line_size = 0;
13031	u_charunsigned char pci_fix_up = driver_setup.pci_fix_up;
13032	u_charunsigned char revision;
13033	u_intunsigned int irq;
13034	u_longunsigned long base, base_2, io_port;
13035	int i;
13036	ncr_chip *chip;
13037
13038	printk(KERN_INFO"<6>" NAME53C8XX"sym53c8xx" ": at PCI bus %d, device %d, function %d\n",
13039	PciBusNumber(pdev)((pdev)>>8),
13040	(int) (PciDeviceFn(pdev)((pdev)&0xff) & 0xf8) >> 3,
13041	(int) (PciDeviceFn(pdev)((pdev)&0xff) & 7));
13042
13043	#ifdef SCSI_NCR_DYNAMIC_DMA_MAPPING
13044	if (!pci_dma_supported(pdev, (dma_addr_t) (0xffffffffUL))) {
13045	printk(KERN_WARNING"<4>" NAME53C8XX"sym53c8xx"
13046	"32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n");
13047	return -1;
13048	}
13049	#endif
13050
13051	/*
13052	** Read info from the PCI config space.
13053	** pci_read_config_xxx() functions are assumed to be used for
13054	** successfully detected PCI devices.
13055	*/
13056	vendor_id = PciVendorId(pdev);
	Value stored to 'vendor_id' is never read
13057	device_id = PciDeviceId(pdev);
13058	irq = PciIrqLine(pdev);
13059	i = 0;
13060	i = pci_get_base_address(pdev, i, &io_port);
13061	i = pci_get_base_address(pdev, i, &base);
13062	(void) pci_get_base_address(pdev, i, &base_2);
13063
13064	pci_read_config_word(pdev, PCI_COMMAND, &command)pcibios_read_config_word(((pdev)>>8), ((pdev)&0xff) , 0x04, &command);
13065	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision)pcibios_read_config_byte(((pdev)>>8), ((pdev)&0xff) , 0x08, &revision);
13066	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line_size)pcibios_read_config_byte(((pdev)>>8), ((pdev)&0xff) , 0x0c, &cache_line_size);
13067	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_timer)pcibios_read_config_byte(((pdev)>>8), ((pdev)&0xff) , 0x0d, &latency_timer);
13068	pci_read_config_word(pdev, PCI_STATUS, &status_reg)pcibios_read_config_word(((pdev)>>8), ((pdev)&0xff) , 0x06, &status_reg);
13069
13070	#ifdef SCSI_NCR_PQS_PDS_SUPPORT
13071	/*
13072	** Match the BUS number for PQS/PDS devices.
13073	** Read the SCSI ID from a special register mapped
13074	** into the configuration space of the individual
13075	** 875s. This register is set up by the PQS bios
13076	*/
13077	for(i = 0; i < SCSI_NCR_MAX_PQS_BUS && pqs_bus[i] != -1; i++) {
13078	u_charunsigned char tmp;
13079	if (pqs_bus[i] == PciBusNumber(pdev)((pdev)>>8)) {
13080	pci_read_config_byte(pdev, 0x84, &tmp)pcibios_read_config_byte(((pdev)>>8), ((pdev)&0xff) , 0x84, &tmp);
13081	device->pqs_pds = 1;
13082	device->host_id = tmp;
13083	break;
13084	}
13085	}
13086	#endif /* SCSI_NCR_PQS_PDS_SUPPORT */
13087
13088	/*
13089	** If user excludes this chip, donnot initialize it.
13090	*/
13091	for (i = 0 ; i < SCSI_NCR_MAX_EXCLUDES8 ; i++) {
13092	if (driver_setup.excludes[i] ==
13093	(io_port & PCI_BASE_ADDRESS_IO_MASK(~0x03)))
13094	return -1;
13095	}
13096	/*
13097	** Check if the chip is supported
13098	*/
13099	chip = 0;
13100	for (i = 0; i < sizeof(ncr_chip_table)/sizeof(ncr_chip_table[0]); i++) {
13101	if (device_id != ncr_chip_table[i].device_id)
13102	continue;
13103	if (revision > ncr_chip_table[i].revision_id)
13104	continue;
13105	if (!(ncr_chip_table[i].features & FE_LDSTR(1<<13)))
13106	break;
13107	chip = &device->chip;
13108	memcpy(chip, &ncr_chip_table[i], sizeof(chip))(__builtin_constant_p(sizeof(chip)) ? __constant_memcpy((chip ),(&ncr_chip_table[i]),(sizeof(chip))) : __memcpy((chip) ,(&ncr_chip_table[i]),(sizeof(chip))));
13109	chip->revision_id = revision;
13110	break;
13111	}
13112
13113	/*
13114	** Ignore Symbios chips controlled by SISL RAID controller.
13115	** This controller sets value 0x52414944 at RAM end - 16.
13116	*/
13117	#if defined(__i386__1) && !defined(SCSI_NCR_PCI_MEM_NOT_SUPPORTED)
13118	if (chip && (base_2 & PCI_BASE_ADDRESS_MEM_MASK(~0x0f))) {
13119	unsigned int ram_size, ram_val;
13120	u_longunsigned long ram_ptr;
13121
13122	if (chip->features & FE_RAM8K(1<<16))
13123	ram_size = 8192;
13124	else
13125	ram_size = 4096;
13126
13127	ram_ptr = remap_pci_mem(base_2 & PCI_BASE_ADDRESS_MEM_MASK(~0x0f),
13128	ram_size);
13129	if (ram_ptr) {
13130	ram_val = readl_raw(ram_ptr + ram_size - 16)((volatile unsigned int ) (ram_ptr + ram_size - 16));
13131	unmap_pci_mem(ram_ptr, ram_size);
13132	if (ram_val == 0x52414944) {
13133	printk(NAME53C8XX"sym53c8xx"": not initializing, "
13134	"driven by SISL RAID controller.\n");
13135	return -1;
13136	}
13137	}
13138	}
13139	#endif /* i386 and PCI MEMORY accessible */
13140
13141	if (!chip) {
13142	printk(NAME53C8XX"sym53c8xx" ": not initializing, device not supported\n");
13143	return -1;
13144	}
13145
13146	#ifdef __powerpc__
13147	/*
13148	** Fix-up for power/pc.
13149	** Should not be performed by the driver.
13150	*/
13151	if ((command & (PCI_COMMAND_IO0x1 \| PCI_COMMAND_MEMORY0x2))
13152	!= (PCI_COMMAND_IO0x1 \| PCI_COMMAND_MEMORY0x2)) {
13153	printk(NAME53C8XX"sym53c8xx" ": setting%s%s...\n",
13154	(command & PCI_COMMAND_IO0x1) ? "" : " PCI_COMMAND_IO",
13155	(command & PCI_COMMAND_MEMORY0x2) ? "" : " PCI_COMMAND_MEMORY");
13156	command \|= (PCI_COMMAND_IO0x1 \| PCI_COMMAND_MEMORY0x2);
13157	pci_write_config_word(pdev, PCI_COMMAND, command)pcibios_write_config_word(((pdev)>>8), ((pdev)&0xff ), 0x04, command);
13158	}
13159
13160	#if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,2,0)(((2)<<16)+((2)<<8)+(0))
13161	if ( is_prep ) {
13162	if (io_port >= 0x10000000) {
13163	printk(NAME53C8XX"sym53c8xx" ": reallocating io_port (Wacky IBM)");
13164	io_port = (io_port & 0x00FFFFFF) \| 0x01000000;
13165	pci_write_config_dword(pdev,pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x10, io_port)
13166	PCI_BASE_ADDRESS_0, io_port)pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x10, io_port);
13167	}
13168	if (base >= 0x10000000) {
13169	printk(NAME53C8XX"sym53c8xx" ": reallocating base (Wacky IBM)");
13170	base = (base & 0x00FFFFFF) \| 0x01000000;
13171	pci_write_config_dword(pdev,pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x14, base)
13172	PCI_BASE_ADDRESS_1, base)pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x14, base);
13173	}
13174	if (base_2 >= 0x10000000) {
13175	printk(NAME53C8XX"sym53c8xx" ": reallocating base2 (Wacky IBM)");
13176	base_2 = (base_2 & 0x00FFFFFF) \| 0x01000000;
13177	pci_write_config_dword(pdev,pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x18, base_2)
13178	PCI_BASE_ADDRESS_2, base_2)pcibios_write_config_dword(((pdev)>>8), ((pdev)&0xff ), 0x18, base_2);
13179	}
13180	}
13181	#endif
13182	#endif /* __powerpc__ */
13183
13184	#if defined(__sparc__) && (LINUX_VERSION_CODE131108 < LinuxVersionCode(2,3,0)(((2)<<16)+((3)<<8)+(0)))
13185	/*
13186	** Fix-ups for sparc.
13187	**
13188	** I wrote: Should not be performed by the driver,
13189	** Guy wrote: but how can OBP know each and every PCI card,
13190	** if they don't use Fcode?
13191	** I replied: no need to know each and every PCI card, just
13192	** be skilled enough to understand the PCI specs.
13193	*/
13194
13195	/*
13196	** PCI configuration is based on configuration registers being
13197	** coherent with hardware and software resource identifications.
13198	** This is fairly simple, but seems still too complex for Sparc.
13199	*/
13200	base = __pa(base);
13201	base_2 = __pa(base_2);
13202
13203	if (!cache_line_size)
13204	suggested_cache_line_size = 16;
13205
13206	driver_setup.pci_fix_up \|= 0x7;
13207
13208	#endif /* __sparc__ */
13209
13210	#if defined(__i386__1) && !defined(MODULE)
13211	if (!cache_line_size) {
13212	#if LINUX_VERSION_CODE131108 < LinuxVersionCode(2,1,75)(((2)<<16)+((1)<<8)+(75))
13213	extern char x86;
13214	switch(x86) {
13215	#else
13216	switch(boot_cpu_data.x86) {
13217	#endif
13218	case 4: suggested_cache_line_size = 4; break;
13219	case 6:
13220	case 5: suggested_cache_line_size = 8; break;
13221	}
13222	}
13223	#endif /* __i386__ */
13224
13225	/*
13226	** Check availability of IO space, memory space.
13227	** Enable master capability if not yet.
13228	**
13229	** We shouldn't have to care about the IO region when
13230	** we are using MMIO. But calling check_region() from
13231	** both the ncr53c8xx and the sym53c8xx drivers prevents
13232	** from attaching devices from the both drivers.
13233	** If you have a better idea, let me know.
13234	*/
13235	/* #ifdef SCSI_NCR_IOMAPPED */
13236	#if 1
13237	if (!(command & PCI_COMMAND_IO0x1)) {
13238	printk(NAME53C8XX"sym53c8xx" ": I/O base address (0x%lx) disabled.\n",
13239	(long) io_port);
13240	io_port = 0;
13241	}
13242	#endif
13243	if (!(command & PCI_COMMAND_MEMORY0x2)) {
13244	printk(NAME53C8XX"sym53c8xx" ": PCI_COMMAND_MEMORY not set.\n");
13245	base = 0;
13246	base_2 = 0;
13247	}
13248	io_port &= PCI_BASE_ADDRESS_IO_MASK(~0x03);
13249	base &= PCI_BASE_ADDRESS_MEM_MASK(~0x0f);
13250	base_2 &= PCI_BASE_ADDRESS_MEM_MASK(~0x0f);
13251
13252	/* #ifdef SCSI_NCR_IOMAPPED */
13253	#if 1
13254	if (io_port && check_region (io_port, 128)) {
13255	printk(NAME53C8XX"sym53c8xx" ": IO region 0x%lx[0..127] is in use\n",
13256	(long) io_port);
13257	io_port = 0;
13258	}
13259	if (!io_port)
13260	return -1;
13261	#endif
13262	#ifndef SCSI_NCR_IOMAPPED
13263	if (!base) {
13264	printk(NAME53C8XX"sym53c8xx" ": MMIO base address disabled.\n");
13265	return -1;
13266	}
13267	#endif
13268
13269	/*
13270	** Set MASTER capable and PARITY bit, if not yet.
13271	*/
13272	if ((command & (PCI_COMMAND_MASTER0x4 \| PCI_COMMAND_PARITY0x40))
13273	!= (PCI_COMMAND_MASTER0x4 \| PCI_COMMAND_PARITY0x40)) {
13274	printk(NAME53C8XX"sym53c8xx" ": setting%s%s...(fix-up)\n",
13275	(command & PCI_COMMAND_MASTER0x4) ? "" : " PCI_COMMAND_MASTER",
13276	(command & PCI_COMMAND_PARITY0x40) ? "" : " PCI_COMMAND_PARITY");
13277	command \|= (PCI_COMMAND_MASTER0x4 \| PCI_COMMAND_PARITY0x40);
13278	pci_write_config_word(pdev, PCI_COMMAND, command)pcibios_write_config_word(((pdev)>>8), ((pdev)&0xff ), 0x04, command);
13279	}
13280
13281	/*
13282	** Fix some features according to driver setup.
13283	*/
13284	if (!(driver_setup.special_features & 1))
13285	chip->features &= ~FE_SPECIAL_SET(((1<<6)\|(1<<7)\|(1<<8)\|(1<<9))\|(1<< 10)\|(1<<11)\|(1<<13)\|(1<<12)\|(1<<14));
13286	else {
13287	if (driver_setup.special_features & 2)
13288	chip->features &= ~FE_WRIE(1<<8);
13289	if (driver_setup.special_features & 4)
13290	chip->features &= ~FE_NOPM(1<<19);
13291	}
13292
13293	/*
13294	** Work around for errant bit in 895A. The 66Mhz
13295	** capable bit is set erroneously. Clear this bit.
13296	** (Item 1 DEL 533)
13297	**
13298	** Make sure Config space and Features agree.
13299	**
13300	** Recall: writes are not normal to status register -
13301	** write a 1 to clear and a 0 to leave unchanged.
13302	** Can only reset bits.
13303	*/
13304	if (chip->features & FE_66MHZ(1<<23)) {
13305	if (!(status_reg & PCI_STATUS_66MHZ0x20))
13306	chip->features &= ~FE_66MHZ(1<<23);
13307	}
13308	else {
13309	if (status_reg & PCI_STATUS_66MHZ0x20) {
13310	status_reg = PCI_STATUS_66MHZ0x20;
13311	pci_write_config_word(pdev, PCI_STATUS, status_reg)pcibios_write_config_word(((pdev)>>8), ((pdev)&0xff ), 0x06, status_reg);
13312	pci_read_config_word(pdev, PCI_STATUS, &status_reg)pcibios_read_config_word(((pdev)>>8), ((pdev)&0xff) , 0x06, &status_reg);
13313	}
13314	}
13315
13316	if (driver_setup.ultra_scsi < 3 && (chip->features & FE_ULTRA3(1<<22))) {
13317	chip->features \|= FE_ULTRA2(1<<3);
13318	chip->features &= ~FE_ULTRA3(1<<22);
13319	}
13320	if (driver_setup.ultra_scsi < 2 && (chip->features & FE_ULTRA2(1<<3))) {
13321	chip->features \|= FE_ULTRA(1<<2);
13322	chip->features &= ~FE_ULTRA2(1<<3);
13323	}
13324	if (driver_setup.ultra_scsi < 1)
13325	chip->features &= ~FE_ULTRA(1<<2);
13326
13327	if (!driver_setup.max_wide)
13328	chip->features &= ~FE_WIDE(1<<1);
13329
13330	/*
13331	* C1010 Ultra3 support requires 16 bit data transfers.
13332	*/
13333	if (!driver_setup.max_wide && (chip->features & FE_ULTRA3(1<<22))) {
13334	chip->features \|= FE_ULTRA2(1<<3);
13335	chip->features \|= ~FE_ULTRA3(1<<22);
13336	}
13337
13338	/*
13339	** Some features are required to be enabled in order to
13340	** work around some chip problems. :) ;)
13341	** (ITEM 12 of a DEL about the 896 I haven't yet).
13342	** We must ensure the chip will use WRITE AND INVALIDATE.
13343	** The revision number limit is for now arbitrary.
13344	*/
13345	if (device_id == PCI_DEVICE_ID_NCR_53C8960x000b && revision <= 0x10) {
13346	chip->features \|= (FE_WRIE(1<<8) \| FE_CLSE(1<<7));
13347	pci_fix_up \|= 3; /* Force appropriate PCI fix-up */
13348	}
13349
13350	#ifdef SCSI_NCR_PCI_FIX_UP_SUPPORT
13351	/*
13352	** Try to fix up PCI config according to wished features.
13353	*/
13354	if ((pci_fix_up & 1) && (chip->features & FE_CLSE(1<<7)) &&
13355	!cache_line_size && suggested_cache_line_size) {
13356	cache_line_size = suggested_cache_line_size;
13357	pci_write_config_byte(pdev,pcibios_write_config_byte(((pdev)>>8), ((pdev)&0xff ), 0x0c, cache_line_size)
13358	PCI_CACHE_LINE_SIZE, cache_line_size)pcibios_write_config_byte(((pdev)>>8), ((pdev)&0xff ), 0x0c, cache_line_size);
13359	printk(NAME53C8XX"sym53c8xx" ": PCI_CACHE_LINE_SIZE set to %d (fix-up).\n",
13360	cache_line_size);
13361	}
13362
13363	if ((pci_fix_up & 2) && cache_line_size &&
13364	(chip->features & FE_WRIE(1<<8)) && !(command & PCI_COMMAND_INVALIDATE0x10)) {
13365	printk(NAME53C8XX"sym53c8xx"": setting PCI_COMMAND_INVALIDATE (fix-up)\n");
13366	command \|= PCI_COMMAND_INVALIDATE0x10;
13367	pci_write_config_word(pdev, PCI_COMMAND, command)pcibios_write_config_word(((pdev)>>8), ((pdev)&0xff ), 0x04, command);
13368	}
13369
13370	/*
13371	** Tune PCI LATENCY TIMER according to burst max length transfer.
13372	** (latency timer >= burst length + 6, we add 10 to be quite sure)
13373	*/
13374
13375	if (chip->burst_max && (latency_timer == 0 \|\| (pci_fix_up & 4))) {
13376	ucharunsigned char lt = (1 << chip->burst_max) + 6 + 10;
13377	if (latency_timer < lt) {
13378	printk(NAME53C8XX"sym53c8xx"
13379	": changing PCI_LATENCY_TIMER from %d to %d.\n",
13380	(int) latency_timer, (int) lt);
13381	latency_timer = lt;
13382	pci_write_config_byte(pdev,pcibios_write_config_byte(((pdev)>>8), ((pdev)&0xff ), 0x0d, latency_timer)
13383	PCI_LATENCY_TIMER, latency_timer)pcibios_write_config_byte(((pdev)>>8), ((pdev)&0xff ), 0x0d, latency_timer);
13384	}
13385	}
13386
13387	#endif /* SCSI_NCR_PCI_FIX_UP_SUPPORT */
13388
13389	/*
13390	** Initialise ncr_device structure with items required by ncr_attach.
13391	*/
13392	device->pdev = pdev;
13393	device->slot.bus = PciBusNumber(pdev)((pdev)>>8);
13394	device->slot.device_fn = PciDeviceFn(pdev)((pdev)&0xff);
13395	device->slot.base = base;
13396	device->slot.base_2 = base_2;
13397	device->slot.io_port = io_port;
13398	device->slot.irq = irq;
13399	device->attach_done = 0;
13400
13401	return 0;
13402	}
13403
13404
13405	/*===================================================================
13406	** Detect and try to read SYMBIOS and TEKRAM NVRAM.
13407	**
13408	** Data can be used to order booting of boards.
13409	**
13410	** Data is saved in ncr_device structure if NVRAM found. This
13411	** is then used to find drive boot order for ncr_attach().
13412	**
13413	** NVRAM data is passed to Scsi_Host_Template later during
13414	** ncr_attach() for any device set up.
13415	*===================================================================
13416	*/
13417	#ifdef SCSI_NCR_NVRAM_SUPPORT
13418	static void __init ncr_get_nvram(ncr_device devp, ncr_nvram nvp)
13419	{
13420	devp->nvram = nvp;
13421	if (!nvp)
13422	return;
13423	/*
13424	** Get access to chip IO registers
13425	*/
13426	#ifdef SCSI_NCR_IOMAPPED
13427	request_region(devp->slot.io_port, 128, NAME53C8XX"sym53c8xx");
13428	devp->slot.base_io = devp->slot.io_port;
13429	#else
13430	devp->slot.reg = (struct ncr_reg *) remap_pci_mem(devp->slot.base, 128);
13431	if (!devp->slot.reg)
13432	return;
13433	#endif
13434
13435	/*
13436	** Try to read SYMBIOS nvram.
13437	** Try to read TEKRAM nvram if Symbios nvram not found.
13438	*/
13439	if (!sym_read_Symbios_nvram(&devp->slot, &nvp->data.Symbios))
13440	nvp->type = SCSI_NCR_SYMBIOS_NVRAM(1);
13441	else if (!sym_read_Tekram_nvram(&devp->slot, devp->chip.device_id,
13442	&nvp->data.Tekram))
13443	nvp->type = SCSI_NCR_TEKRAM_NVRAM(2);
13444	else {
13445	nvp->type = 0;
13446	devp->nvram = 0;
13447	}
13448
13449	/*
13450	** Release access to chip IO registers
13451	*/
13452	#ifdef SCSI_NCR_IOMAPPED
13453	release_region(devp->slot.base_io, 128);
13454	#else
13455	unmap_pci_mem((u_longunsigned long) devp->slot.reg, 128ul);
13456	#endif
13457
13458	}
13459	#endif /* SCSI_NCR_NVRAM_SUPPORT */
13460
13461	/*
13462	** Linux select queue depths function
13463	*/
13464
13465	#define DEF_DEPTH(driver_setup.default_tags) (driver_setup.default_tags)
13466	#define ALL_TARGETS-2 -2
13467	#define NO_TARGET-1 -1
13468	#define ALL_LUNS-2 -2
13469	#define NO_LUN-1 -1
13470
13471	static int device_queue_depth(ncb_p np, int target, int lun)
13472	{
13473	int c, h, t, u, v;
13474	char *p = driver_setup.tag_ctrl;
13475	char *ep;
13476
13477	h = -1;
13478	t = NO_TARGET-1;
13479	u = NO_LUN-1;
13480	while ((c = *p++) != 0) {
13481	v = simple_strtoul(p, &ep, 0);
13482	switch(c) {
13483	case '/':
13484	++h;
13485	t = ALL_TARGETS-2;
13486	u = ALL_LUNS-2;
13487	break;
13488	case 't':
13489	if (t != target)
13490	t = (target == v) ? v : NO_TARGET-1;
13491	u = ALL_LUNS-2;
13492	break;
13493	case 'u':
13494	if (u != lun)
13495	u = (lun == v) ? v : NO_LUN-1;
13496	break;
13497	case 'q':
13498	if (h == np->unit &&
13499	(t == ALL_TARGETS-2 \|\| t == target) &&
13500	(u == ALL_LUNS-2 \|\| u == lun))
13501	return v;
13502	break;
13503	case '-':
13504	t = ALL_TARGETS-2;
13505	u = ALL_LUNS-2;
13506	break;
13507	default:
13508	break;
13509	}
13510	p = ep;
13511	}
13512	return DEF_DEPTH(driver_setup.default_tags);
13513	}
13514
13515	static void sym53c8xx_select_queue_depths(struct Scsi_Host host, struct scsi_device devlist)
13516	{
13517	struct scsi_device *device;
13518
13519	for (device = devlist; device; device = device->next) {
13520	ncb_p np;
13521	tcb_p tp;
13522	lcb_p lp;
13523	int numtags;
13524
13525	if (device->host != host)
13526	continue;
13527
13528	np = ((struct host_data *) host->hostdata)->ncb;
13529	tp = &np->target[device->id];
13530	lp = ncr_lp(np, tp, device->lun)(!device->lun) ? (tp)->l0p : (tp)->lmp ? (tp)->lmp [(device->lun)] : 0;
13531
13532	/*
13533	** Select queue depth from driver setup.
13534	** Donnot use more than configured by user.
13535	** Use at least 2.
13536	** Donnot use more than our maximum.
13537	*/
13538	numtags = device_queue_depth(np, device->id, device->lun);
13539	if (numtags > tp->usrtags)
13540	numtags = tp->usrtags;
13541	if (!device->tagged_supported)
13542	numtags = 1;
13543	device->queue_depth = numtags;
13544	if (device->queue_depth < 2)
13545	device->queue_depth = 2;
13546	if (device->queue_depth > MAX_TAGS(8))
13547	device->queue_depth = MAX_TAGS(8);
13548
13549	/*
13550	** Since the queue depth is not tunable under Linux,
13551	** we need to know this value in order not to
13552	** announce stupid things to user.
13553	*/
13554	if (lp) {
13555	lp->numtags = lp->maxtags = numtags;
13556	lp->scdev_depth = device->queue_depth;
13557	}
13558	ncr_setup_tags (np, device->id, device->lun);
13559
13560	#ifdef DEBUG_SYM53C8XX
13561	printk("sym53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n",
13562	np->unit, device->id, device->lun, device->queue_depth);
13563	#endif
13564	}
13565	}
13566
13567	/*
13568	** Linux entry point for info() function
13569	*/
13570	const char sym53c8xx_info (struct Scsi_Host host)
13571	{
13572	return SCSI_NCR_DRIVER_NAME"sym53c8xx-1.7.1-20000726";
13573	}
13574
13575	/*
13576	** Linux entry point of queuecommand() function
13577	*/
13578
13579	int sym53c8xx_queue_command (Scsi_Cmnd cmd, void ( done)(Scsi_Cmnd *))
13580	{
13581	ncb_p np = ((struct host_data *) cmd->host->hostdata)->ncb;
13582	unsigned long flags;
13583	int sts;
13584
13585	#ifdef DEBUG_SYM53C8XX
13586	printk("sym53c8xx_queue_command\n");
13587	#endif
13588
13589	cmd->scsi_done = done;
13590	cmd->host_scribble = NULL((void *) 0);
13591	cmd->SCp.ptr = NULL((void *) 0);
13592	cmd->SCp.buffer = NULL((void *) 0);
13593	#ifdef SCSI_NCR_DYNAMIC_DMA_MAPPING
13594	cmd->__data_mapped = 0;
13595	cmd->__data_mapping = 0;
13596	#endif
13597
13598	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
13599
13600	if ((sts = ncr_queue_command(np, cmd)) != DID_OK0x00) {
13601	SetScsiResult(cmd, sts, 0)cmd->result = (((sts) << 16) + ((0) & 0x7f));
13602	#ifdef DEBUG_SYM53C8XX
13603	printk("sym53c8xx : command not queued - result=%d\n", sts);
13604	#endif
13605	}
13606	#ifdef DEBUG_SYM53C8XX
13607	else
13608	printk("sym53c8xx : command successfully queued\n");
13609	#endif
13610
13611	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
13612
13613	if (sts != DID_OK0x00) {
13614	unmap_scsi_data(np, cmd)do {; } while (0);
13615	done(cmd);
13616	}
13617
13618	return sts;
13619	}
13620
13621	/*
13622	** Linux entry point of the interrupt handler.
13623	** Since linux versions > 1.3.70, we trust the kernel for
13624	** passing the internal host descriptor as 'dev_id'.
13625	** Otherwise, we scan the host list and call the interrupt
13626	** routine for each host that uses this IRQ.
13627	*/
13628
13629	static void sym53c8xx_intr(int irq, void dev_id, struct pt_regs regs)
13630	{
13631	unsigned long flags;
13632	ncb_p np = (ncb_p) dev_id;
13633	Scsi_Cmnd *done_list;
13634
13635	#ifdef DEBUG_SYM53C8XX
13636	printk("sym53c8xx : interrupt received\n");
13637	#endif
13638
13639	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("[");
13640
13641	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
13642	ncr_exception(np);
13643	done_list = np->done_list;
13644	np->done_list = 0;
13645	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
13646
13647	if (DEBUG_FLAGSncr_debug & DEBUG_TINY(0x0080)) printk ("]\n");
13648
13649	if (done_list) {
13650	NCR_LOCK_SCSI_DONE(np, flags)do {;} while (0);
13651	ncr_flush_done_cmds(done_list);
13652	NCR_UNLOCK_SCSI_DONE(np, flags)do {;} while (0);
13653	}
13654	}
13655
13656	/*
13657	** Linux entry point of the timer handler
13658	*/
13659
13660	static void sym53c8xx_timeout(unsigned long npref)
13661	{
13662	ncb_p np = (ncb_p) npref;
13663	unsigned long flags;
13664	Scsi_Cmnd *done_list;
13665
13666	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
13667	ncr_timeout((ncb_p) np);
13668	done_list = np->done_list;
13669	np->done_list = 0;
13670	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
13671
13672	if (done_list) {
13673	NCR_LOCK_SCSI_DONE(np, flags)do {;} while (0);
13674	ncr_flush_done_cmds(done_list);
13675	NCR_UNLOCK_SCSI_DONE(np, flags)do {;} while (0);
13676	}
13677	}
13678
13679	/*
13680	** Linux entry point of reset() function
13681	*/
13682
13683	#if defined SCSI_RESET_SYNCHRONOUS0x01 && defined SCSI_RESET_ASYNCHRONOUS0x02
13684	int sym53c8xx_reset(Scsi_Cmnd *cmd, unsigned int reset_flags)
13685	#else
13686	int sym53c8xx_reset(Scsi_Cmnd *cmd)
13687	#endif
13688	{
13689	ncb_p np = ((struct host_data *) cmd->host->hostdata)->ncb;
13690	int sts;
13691	unsigned long flags;
13692	Scsi_Cmnd *done_list;
13693
13694	#if defined SCSI_RESET_SYNCHRONOUS0x01 && defined SCSI_RESET_ASYNCHRONOUS0x02
13695	printk("sym53c8xx_reset: pid=%lu reset_flags=%x serial_number=%ld serial_number_at_timeout=%ld\n",
13696	cmd->pid, reset_flags, cmd->serial_number, cmd->serial_number_at_timeout);
13697	#else
13698	printk("sym53c8xx_reset: command pid %lu\n", cmd->pid);
13699	#endif
13700
13701	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
13702
13703	/*
13704	* We have to just ignore reset requests in some situations.
13705	*/
13706	#if defined SCSI_RESET_NOT_RUNNING5
13707	if (cmd->serial_number != cmd->serial_number_at_timeout) {
13708	sts = SCSI_RESET_NOT_RUNNING5;
13709	goto out;
13710	}
13711	#endif
13712	/*
13713	* If the mid-level driver told us reset is synchronous, it seems
13714	* that we must call the done() callback for the involved command,
13715	* even if this command was not queued to the low-level driver,
13716	* before returning SCSI_RESET_SUCCESS.
13717	*/
13718
13719	#if defined SCSI_RESET_SYNCHRONOUS0x01 && defined SCSI_RESET_ASYNCHRONOUS0x02
13720	sts = ncr_reset_bus(np, cmd,
13721	(reset_flags & (SCSI_RESET_SYNCHRONOUS0x01 \| SCSI_RESET_ASYNCHRONOUS0x02)) == SCSI_RESET_SYNCHRONOUS0x01);
13722	#else
13723	sts = ncr_reset_bus(np, cmd, 0);
13724	#endif
13725
13726	/*
13727	* Since we always reset the controller, when we return success,
13728	* we add this information to the return code.
13729	*/
13730	#if defined SCSI_RESET_HOST_RESET0x200
13731	if (sts == SCSI_RESET_SUCCESS2)
13732	sts \|= SCSI_RESET_HOST_RESET0x200;
13733	#endif
13734
13735	out:
13736	done_list = np->done_list;
13737	np->done_list = 0;
13738	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
13739
13740	ncr_flush_done_cmds(done_list);
13741
13742	return sts;
13743	}
13744
13745	/*
13746	** Linux entry point of abort() function
13747	*/
13748
13749	int sym53c8xx_abort(Scsi_Cmnd *cmd)
13750	{
13751	ncb_p np = ((struct host_data *) cmd->host->hostdata)->ncb;
13752	int sts;
13753	unsigned long flags;
13754	Scsi_Cmnd *done_list;
13755
13756	#if defined SCSI_RESET_SYNCHRONOUS0x01 && defined SCSI_RESET_ASYNCHRONOUS0x02
13757	printk("sym53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
13758	cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
13759	#else
13760	printk("sym53c8xx_abort: command pid %lu\n", cmd->pid);
13761	#endif
13762
13763	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
13764
13765	#if defined SCSI_RESET_SYNCHRONOUS0x01 && defined SCSI_RESET_ASYNCHRONOUS0x02
13766	/*
13767	* We have to just ignore abort requests in some situations.
13768	*/
13769	if (cmd->serial_number != cmd->serial_number_at_timeout) {
13770	sts = SCSI_ABORT_NOT_RUNNING4;
13771	goto out;
13772	}
13773	#endif
13774
13775	sts = ncr_abort_command(np, cmd);
13776	out:
13777	done_list = np->done_list;
13778	np->done_list = 0;
13779	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
13780
13781	ncr_flush_done_cmds(done_list);
13782
13783	return sts;
13784	}
13785
13786
13787	#ifdef MODULE
13788	int sym53c8xx_release(struct Scsi_Host *host)
13789	{
13790	#ifdef DEBUG_SYM53C8XX
13791	printk("sym53c8xx : release\n");
13792	#endif
13793	ncr_detach(((struct host_data *) host->hostdata)->ncb);
13794
13795	return 1;
13796	}
13797	#endif
13798
13799
13800	/*
13801	** Scsi command waiting list management.
13802	**
13803	** It may happen that we cannot insert a scsi command into the start queue,
13804	** in the following circumstances.
13805	** Too few preallocated ccb(s),
13806	** maxtags < cmd_per_lun of the Linux host control block,
13807	** etc...
13808	** Such scsi commands are inserted into a waiting list.
13809	** When a scsi command complete, we try to requeue the commands of the
13810	** waiting list.
13811	*/
13812
13813	#define next_wcmd host_scribble
13814
13815	static void insert_into_waiting_list(ncb_p np, Scsi_Cmnd *cmd)
13816	{
13817	Scsi_Cmnd *wcmd;
13818
13819	#ifdef DEBUG_WAITING_LIST
13820	printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_longunsigned long) cmd);
13821	#endif
13822	cmd->next_wcmd = 0;
13823	if (!(wcmd = np->waiting_list)) np->waiting_list = cmd;
13824	else {
13825	while ((wcmd->next_wcmd) != 0)
13826	wcmd = (Scsi_Cmnd *) wcmd->next_wcmd;
13827	wcmd->next_wcmd = (char *) cmd;
13828	}
13829	}
13830
13831	static Scsi_Cmnd retrieve_from_waiting_list(int to_remove, ncb_p np, Scsi_Cmnd cmd)
13832	{
13833	Scsi_Cmnd **pcmd = &np->waiting_list;
13834
13835	while (*pcmd) {
13836	if (cmd == *pcmd) {
13837	if (to_remove) {
13838	pcmd = (Scsi_Cmnd ) cmd->next_wcmd;
13839	cmd->next_wcmd = 0;
13840	}
13841	#ifdef DEBUG_WAITING_LIST
13842	printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_longunsigned long) cmd);
13843	#endif
13844	return cmd;
13845	}
13846	pcmd = (Scsi_Cmnd *) &(pcmd)->next_wcmd;
13847	}
13848	return 0;
13849	}
13850
13851	static void process_waiting_list(ncb_p np, int sts)
13852	{
13853	Scsi_Cmnd waiting_list, wcmd;
13854
13855	waiting_list = np->waiting_list;
13856	np->waiting_list = 0;
13857
13858	#ifdef DEBUG_WAITING_LIST
13859	if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_longunsigned long) waiting_list, sts);
13860	#endif
13861	while ((wcmd = waiting_list) != 0) {
13862	waiting_list = (Scsi_Cmnd *) wcmd->next_wcmd;
13863	wcmd->next_wcmd = 0;
13864	if (sts == DID_OK0x00) {
13865	#ifdef DEBUG_WAITING_LIST
13866	printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_longunsigned long) wcmd);
13867	#endif
13868	sts = ncr_queue_command(np, wcmd);
13869	}
13870	if (sts != DID_OK0x00) {
13871	#ifdef DEBUG_WAITING_LIST
13872	printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_longunsigned long) wcmd, sts);
13873	#endif
13874	SetScsiResult(wcmd, sts, 0)wcmd->result = (((sts) << 16) + ((0) & 0x7f));
13875	ncr_queue_done_cmd(np, wcmd);
13876	}
13877	}
13878	}
13879
13880	#undef next_wcmd
13881
13882	#ifdef SCSI_NCR_PROC_INFO_SUPPORT
13883
13884	/*=========================================================================
13885	** Proc file system stuff
13886	**
13887	** A read operation returns adapter information.
13888	** A write operation is a control command.
13889	** The string is parsed in the driver code and the command is passed
13890	** to the ncr_usercmd() function.
13891	**=========================================================================
13892	*/
13893
13894	#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
13895
13896	#define is_digit(c) ((c) >= '0' && (c) <= '9')
13897	#define digit_to_bin(c) ((c) - '0')
13898	#define is_space(c) ((c) == ' ' \|\| (c) == '\t')
13899
13900	static int skip_spaces(char *ptr, int len)
13901	{
13902	int cnt, c;
13903
13904	for (cnt = len; cnt > 0 && (c = *ptr++) && is_space(c); cnt--);
13905
13906	return (len - cnt);
13907	}
13908
13909	static int get_int_arg(char ptr, int len, u_longunsigned long pv)
13910	{
13911	int cnt, c;
13912	u_longunsigned long v;
13913
13914	for (v = 0, cnt = len; cnt > 0 && (c = *ptr++) && is_digit(c); cnt--) {
13915	v = (v * 10) + digit_to_bin(c);
13916	}
13917
13918	if (pv)
13919	*pv = v;
13920
13921	return (len - cnt);
13922	}
13923
13924	static int is_keyword(char ptr, int len, char verb)
13925	{
13926	int verb_len = strlen(verb);
13927
13928	if (len >= strlen(verb) && !memcmp__builtin_memcmp(verb, ptr, verb_len))
13929	return verb_len;
13930	else
13931	return 0;
13932
13933	}
13934
13935	#define SKIP_SPACES(min_spaces) \
13936	if ((arg_len = skip_spaces(ptr, len)) < (min_spaces)) \
13937	return -EINVAL22; \
13938	ptr += arg_len; len -= arg_len;
13939
13940	#define GET_INT_ARG(v) \
13941	if (!(arg_len = get_int_arg(ptr, len, &(v)))) \
13942	return -EINVAL22; \
13943	ptr += arg_len; len -= arg_len;
13944
13945
13946	/*
13947	** Parse a control command
13948	*/
13949
13950	static int ncr_user_command(ncb_p np, char *buffer, int length)
13951	{
13952	char *ptr = buffer;
13953	int len = length;
13954	struct usrcmd *uc = &np->user;
13955	int arg_len;
13956	u_longunsigned long target;
13957
13958	bzero(uc, sizeof(uc))(__builtin_constant_p(0) ? (__builtin_constant_p(((sizeof(uc )))) ? __constant_c_and_count_memset((((uc))),((0x01010101UL* (unsigned char)(0))),(((sizeof(uc))))) : __constant_c_memset ((((uc))),((0x01010101UL(unsigned char)(0))),(((sizeof(uc)) )))) : (__builtin_constant_p(((sizeof(uc)))) ? __memset_generic (((((uc)))),(((0))),((((sizeof(uc)))))) : __memset_generic(( ((uc))),((0)),(((sizeof(uc)))))));
13959
13960	if (len > 0 && ptr[len-1] == '\n')
13961	--len;
13962
13963	if ((arg_len = is_keyword(ptr, len, "setsync")) != 0)
13964	uc->cmd = UC_SETSYNC10;
13965	else if ((arg_len = is_keyword(ptr, len, "settags")) != 0)
13966	uc->cmd = UC_SETTAGS11;
13967	else if ((arg_len = is_keyword(ptr, len, "setorder")) != 0)
13968	uc->cmd = UC_SETORDER13;
13969	else if ((arg_len = is_keyword(ptr, len, "setverbose")) != 0)
13970	uc->cmd = UC_SETVERBOSE17;
13971	else if ((arg_len = is_keyword(ptr, len, "setwide")) != 0)
13972	uc->cmd = UC_SETWIDE14;
13973	else if ((arg_len = is_keyword(ptr, len, "setdebug")) != 0)
13974	uc->cmd = UC_SETDEBUG12;
13975	else if ((arg_len = is_keyword(ptr, len, "setflag")) != 0)
13976	uc->cmd = UC_SETFLAG15;
13977	else if ((arg_len = is_keyword(ptr, len, "resetdev")) != 0)
13978	uc->cmd = UC_RESETDEV18;
13979	else if ((arg_len = is_keyword(ptr, len, "cleardev")) != 0)
13980	uc->cmd = UC_CLEARDEV19;
13981	else
13982	arg_len = 0;
13983
13984	#ifdef DEBUG_PROC_INFO
13985	printk("ncr_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
13986	#endif
13987
13988	if (!arg_len)
13989	return -EINVAL22;
13990	ptr += arg_len; len -= arg_len;
13991
13992	switch(uc->cmd) {
13993	case UC_SETSYNC10:
13994	case UC_SETTAGS11:
13995	case UC_SETWIDE14:
13996	case UC_SETFLAG15:
13997	case UC_RESETDEV18:
13998	case UC_CLEARDEV19:
13999	SKIP_SPACES(1);
14000	if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
14001	ptr += arg_len; len -= arg_len;
14002	uc->target = ~0;
14003	} else {
14004	GET_INT_ARG(target);
14005	uc->target = (1<<target);
14006	#ifdef DEBUG_PROC_INFO
14007	printk("ncr_user_command: target=%ld\n", target);
14008	#endif
14009	}
14010	break;
14011	}
14012
14013	switch(uc->cmd) {
14014	case UC_SETVERBOSE17:
14015	case UC_SETSYNC10:
14016	case UC_SETTAGS11:
14017	case UC_SETWIDE14:
14018	SKIP_SPACES(1);
14019	GET_INT_ARG(uc->data);
14020	#ifdef DEBUG_PROC_INFO
14021	printk("ncr_user_command: data=%ld\n", uc->data);
14022	#endif
14023	break;
14024	case UC_SETORDER13:
14025	SKIP_SPACES(1);
14026	if ((arg_len = is_keyword(ptr, len, "simple")))
14027	uc->data = M_SIMPLE_TAG(0x20);
14028	else if ((arg_len = is_keyword(ptr, len, "ordered")))
14029	uc->data = M_ORDERED_TAG(0x22);
14030	else if ((arg_len = is_keyword(ptr, len, "default")))
14031	uc->data = 0;
14032	else
14033	return -EINVAL22;
14034	break;
14035	case UC_SETDEBUG12:
14036	while (len > 0) {
14037	SKIP_SPACES(1);
14038	if ((arg_len = is_keyword(ptr, len, "alloc")))
14039	uc->data \|= DEBUG_ALLOC(0x0001);
14040	else if ((arg_len = is_keyword(ptr, len, "phase")))
14041	uc->data \|= DEBUG_PHASE(0x0002);
14042	else if ((arg_len = is_keyword(ptr, len, "queue")))
14043	uc->data \|= DEBUG_QUEUE(0x0008);
14044	else if ((arg_len = is_keyword(ptr, len, "result")))
14045	uc->data \|= DEBUG_RESULT(0x0010);
14046	else if ((arg_len = is_keyword(ptr, len, "pointer")))
14047	uc->data \|= DEBUG_POINTER(0x0020);
14048	else if ((arg_len = is_keyword(ptr, len, "script")))
14049	uc->data \|= DEBUG_SCRIPT(0x0040);
14050	else if ((arg_len = is_keyword(ptr, len, "tiny")))
14051	uc->data \|= DEBUG_TINY(0x0080);
14052	else if ((arg_len = is_keyword(ptr, len, "timing")))
14053	uc->data \|= DEBUG_TIMING(0x0100);
14054	else if ((arg_len = is_keyword(ptr, len, "nego")))
14055	uc->data \|= DEBUG_NEGO(0x0200);
14056	else if ((arg_len = is_keyword(ptr, len, "tags")))
14057	uc->data \|= DEBUG_TAGS(0x0400);
14058	else
14059	return -EINVAL22;
14060	ptr += arg_len; len -= arg_len;
14061	}
14062	#ifdef DEBUG_PROC_INFO
14063	printk("ncr_user_command: data=%ld\n", uc->data);
14064	#endif
14065	break;
14066	case UC_SETFLAG15:
14067	while (len > 0) {
14068	SKIP_SPACES(1);
14069	if ((arg_len = is_keyword(ptr, len, "trace")))
14070	uc->data \|= UF_TRACE(0x01);
14071	else if ((arg_len = is_keyword(ptr, len, "no_disc")))
14072	uc->data \|= UF_NODISC(0x02);
14073	else
14074	return -EINVAL22;
14075	ptr += arg_len; len -= arg_len;
14076	}
14077	break;
14078	default:
14079	break;
14080	}
14081
14082	if (len)
14083	return -EINVAL22;
14084	else {
14085	long flags;
14086
14087	NCR_LOCK_NCB(np, flags)do { __asm__ __volatile__("pushf ; pop %0" : "=r" (flags): :"memory" ); __asm__ __volatile__ ("cli": : :"memory"); } while (0);
14088	ncr_usercmd (np);
14089	NCR_UNLOCK_NCB(np, flags)do { __asm__ __volatile__("push %0 ; popf": :"g" (flags):"memory" ); } while (0);
14090	}
14091	return length;
14092	}
14093
14094	#endif /* SCSI_NCR_USER_COMMAND_SUPPORT */
14095
14096	#ifdef SCSI_NCR_USER_INFO_SUPPORT
14097
14098	struct info_str
14099	{
14100	char *buffer;
14101	int length;
14102	int offset;
14103	int pos;
14104	};
14105
14106	static void copy_mem_info(struct info_str info, char data, int len)
14107	{
14108	if (info->pos + len > info->length)
14109	len = info->length - info->pos;
14110
14111	if (info->pos + len < info->offset) {
14112	info->pos += len;
14113	return;
14114	}
14115	if (info->pos < info->offset) {
14116	data += (info->offset - info->pos);
14117	len -= (info->offset - info->pos);
14118	}
14119
14120	if (len > 0) {
14121	memcpy(info->buffer + info->pos, data, len)(__builtin_constant_p(len) ? __constant_memcpy((info->buffer + info->pos),(data),(len)) : __memcpy((info->buffer + info ->pos),(data),(len)));
14122	info->pos += len;
14123	}
14124	}
14125
14126	static int copy_info(struct info_str info, char fmt, ...)
14127	{
14128	va_list args;
14129	char buf[81];
14130	int len;
14131
14132	va_start(args, fmt)__builtin_va_start(args,fmt);
14133	len = vsprintflinux_vsprintf(buf, fmt, args);
14134	va_end(args)__builtin_va_end(args);
14135
14136	copy_mem_info(info, buf, len);
14137	return len;
14138	}
14139
14140	/*
14141	** Copy formatted information into the input buffer.
14142	*/
14143
14144	static int ncr_host_info(ncb_p np, char *ptr, off_t offset, int len)
14145	{
14146	struct info_str info;
14147	#ifdef CONFIG_ALL_PPC
14148	struct device_node* of_node;
14149	#endif
14150
14151	info.buffer = ptr;
14152	info.length = len;
14153	info.offset = offset;
14154	info.pos = 0;
14155
14156	copy_info(&info, "General information:\n");
14157	copy_info(&info, " Chip " NAME53C"sym53c" "%s, device id 0x%x, "
14158	"revision id 0x%x\n",
14159	np->chip_name, np->device_id, np->revision_id);
14160	copy_info(&info, " On PCI bus %d, device %d, function %d, "
14161	#ifdef __sparc__
14162	"IRQ %s\n",
14163	#else
14164	"IRQ %d\n",
14165	#endif
14166	np->bus, (np->device_fn & 0xf8) >> 3, np->device_fn & 7,
14167	#ifdef __sparc__
14168	__irq_itoa(np->irq));
14169	#else
14170	(int) np->irq);
14171	#endif
14172	#ifdef CONFIG_ALL_PPC
14173	of_node = find_pci_device_OFnode(np->bus, np->device_fn);
14174	if (of_node && of_node->full_name)
14175	copy_info(&info, "PPC OpenFirmware path : %s\n", of_node->full_name);
14176	#endif
14177	copy_info(&info, " Synchronous period factor %d, "
14178	"max commands per lun %d\n",
14179	(int) np->minsync, MAX_TAGS(8));
14180
14181	if (driver_setup.debug \|\| driver_setup.verbose > 1) {
14182	copy_info(&info, " Debug flags 0x%x, verbosity level %d\n",
14183	driver_setup.debug, driver_setup.verbose);
14184	}
14185
14186	return info.pos > info.offset? info.pos - info.offset : 0;
14187	}
14188
14189	#endif /* SCSI_NCR_USER_INFO_SUPPORT */
14190
14191	/*
14192	** Entry point of the scsi proc fs of the driver.
14193	** - func = 0 means read (returns adapter infos)
14194	** - func = 1 means write (parse user control command)
14195	*/
14196
14197	static int sym53c8xx_proc_info(char buffer, char *start, off_t offset,
14198	int length, int hostno, int func)
14199	{
14200	struct Scsi_Host *host;
14201	struct host_data *host_data;
14202	ncb_p ncb = 0;
14203	int retv;
14204
14205	#ifdef DEBUG_PROC_INFO
14206	printk("sym53c8xx_proc_info: hostno=%d, func=%d\n", hostno, func);
14207	#endif
14208
14209	for (host = first_host; host; host = host->next) {
14210	if (host->hostt != first_host->hostt)
14211	continue;
14212	if (host->host_no == hostno) {
14213	host_data = (struct host_data *) host->hostdata;
14214	ncb = host_data->ncb;
14215	break;
14216	}
14217	}
14218
14219	if (!ncb)
14220	return -EINVAL22;
14221
14222	if (func) {
14223	#ifdef SCSI_NCR_USER_COMMAND_SUPPORT
14224	retv = ncr_user_command(ncb, buffer, length);
14225	#else
14226	retv = -EINVAL22;
14227	#endif
14228	}
14229	else {
14230	if (start)
14231	*start = buffer;
14232	#ifdef SCSI_NCR_USER_INFO_SUPPORT
14233	retv = ncr_host_info(ncb, buffer, offset, length);
14234	#else
14235	retv = -EINVAL22;
14236	#endif
14237	}
14238
14239	return retv;
14240	}
14241
14242
14243	/*=========================================================================
14244	** End of proc file system stuff
14245	**=========================================================================
14246	*/
14247	#endif
14248
14249
14250	#ifdef SCSI_NCR_NVRAM_SUPPORT
14251
14252	/*
14253	* 24C16 EEPROM reading.
14254	*
14255	* GPOI0 - data in/data out
14256	* GPIO1 - clock
14257	* Symbios NVRAM wiring now also used by Tekram.
14258	*/
14259
14260	#define SET_BIT 0
14261	#define CLR_BIT 1
14262	#define SET_CLK 2
14263	#define CLR_CLK 3
14264
14265	/*
14266	* Set/clear data/clock bit in GPIO0
14267	*/
14268	static void __init
14269	S24C16_set_bit(ncr_slot np, u_charunsigned char write_bit, u_charunsigned char gpreg, int bit_mode)
14270	{
14271	UDELAY (5);
14272	switch (bit_mode){
14273	case SET_BIT:
14274	*gpreg \|= write_bit;
14275	break;
14276	case CLR_BIT:
14277	*gpreg &= 0xfe;
14278	break;
14279	case SET_CLK:
14280	*gpreg \|= 0x02;
14281	break;
14282	case CLR_CLK:
14283	*gpreg &= 0xfd;
14284	break;
14285
14286	}
14287	OUTB (nc_gpreg, gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg)) ));
14288	UDELAY (5);
14289	}
14290
14291	/*
14292	* Send START condition to NVRAM to wake it up.
14293	*/
14294	static void __init S24C16_start(ncr_slot np, u_charunsigned char gpreg)
14295	{
14296	S24C16_set_bit(np, 1, gpreg, SET_BIT);
14297	S24C16_set_bit(np, 0, gpreg, SET_CLK);
14298	S24C16_set_bit(np, 0, gpreg, CLR_BIT);
14299	S24C16_set_bit(np, 0, gpreg, CLR_CLK);
14300	}
14301
14302	/*
14303	* Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!!
14304	*/
14305	static void __init S24C16_stop(ncr_slot np, u_charunsigned char gpreg)
14306	{
14307	S24C16_set_bit(np, 0, gpreg, SET_CLK);
14308	S24C16_set_bit(np, 1, gpreg, SET_BIT);
14309	}
14310
14311	/*
14312	* Read or write a bit to the NVRAM,
14313	* read if GPIO0 input else write if GPIO0 output
14314	*/
14315	static void __init
14316	S24C16_do_bit(ncr_slot np, u_charunsigned char read_bit, u_charunsigned char write_bit, u_charunsigned char *gpreg)
14317	{
14318	S24C16_set_bit(np, write_bit, gpreg, SET_BIT);
14319	S24C16_set_bit(np, 0, gpreg, SET_CLK);
14320	if (read_bit)
14321	read_bit = INB (nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_gpreg)))));
14322	S24C16_set_bit(np, 0, gpreg, CLR_CLK);
14323	S24C16_set_bit(np, 0, gpreg, CLR_BIT);
14324	}
14325
14326	/*
14327	* Output an ACK to the NVRAM after reading,
14328	* change GPIO0 to output and when done back to an input
14329	*/
14330	static void __init
14331	S24C16_write_ack(ncr_slot np, u_charunsigned char write_bit, u_charunsigned char gpreg, u_charunsigned char *gpcntl)
14332	{
14333	OUTB (nc_gpcntl, gpcntl & 0xfe)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl & 0xfe))));
14334	S24C16_do_bit(np, 0, write_bit, gpreg);
14335	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl ))));
14336	}
14337
14338	/*
14339	* Input an ACK from NVRAM after writing,
14340	* change GPIO0 to input and when done back to an output
14341	*/
14342	static void __init
14343	S24C16_read_ack(ncr_slot np, u_charunsigned char read_bit, u_charunsigned char gpreg, u_charunsigned char gpcntl)
14344	{
14345	OUTB (nc_gpcntl, gpcntl \| 0x01)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl \| 0x01))));
14346	S24C16_do_bit(np, read_bit, 1, gpreg);
14347	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl ))));
14348	}
14349
14350	/*
14351	* WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK,
14352	* GPIO0 must already be set as an output
14353	*/
14354	static void __init
14355	S24C16_write_byte(ncr_slot np, u_charunsigned char ack_data, u_charunsigned char write_data,
14356	u_charunsigned char gpreg, u_charunsigned char gpcntl)
14357	{
14358	int x;
14359
14360	for (x = 0; x < 8; x++)
14361	S24C16_do_bit(np, 0, (write_data >> (7 - x)) & 0x01, gpreg);
14362
14363	S24C16_read_ack(np, ack_data, gpreg, gpcntl);
14364	}
14365
14366	/*
14367	* READ a byte from the NVRAM and then send an ACK to say we have got it,
14368	* GPIO0 must already be set as an input
14369	*/
14370	static void __init
14371	S24C16_read_byte(ncr_slot np, u_charunsigned char read_data, u_charunsigned char ack_data,
14372	u_charunsigned char gpreg, u_charunsigned char gpcntl)
14373	{
14374	int x;
14375	u_charunsigned char read_bit;
14376
14377	*read_data = 0;
14378	for (x = 0; x < 8; x++) {
14379	S24C16_do_bit(np, &read_bit, 1, gpreg);
14380	*read_data \|= ((read_bit & 0x01) << (7 - x));
14381	}
14382
14383	S24C16_write_ack(np, ack_data, gpreg, gpcntl);
14384	}
14385
14386	/*
14387	* Read 'len' bytes starting at 'offset'.
14388	*/
14389	static int __init
14390	sym_read_S24C16_nvram (ncr_slot np, int offset, u_charunsigned char data, int len)
14391	{
14392	u_charunsigned char gpcntl, gpreg;
14393	u_charunsigned char old_gpcntl, old_gpreg;
14394	u_charunsigned char ack_data;
14395	int retv = 1;
14396	int x;
14397
14398	/* save current state of GPCNTL and GPREG */
14399	old_gpreg = INB (nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpreg)))));
14400	old_gpcntl = INB (nc_gpcntl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpcntl)))));
14401	gpcntl = old_gpcntl & 0xfc;
14402
14403	/* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */
14404	OUTB (nc_gpreg, old_gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((old_gpreg ))));
14405	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl) )));
14406
14407	/* this is to set NVRAM into a known state with GPIO0/1 both low */
14408	gpreg = old_gpreg;
14409	S24C16_set_bit(np, 0, &gpreg, CLR_CLK);
14410	S24C16_set_bit(np, 0, &gpreg, CLR_BIT);
14411
14412	/* now set NVRAM inactive with GPIO0/1 both high */
14413	S24C16_stop(np, &gpreg);
14414
14415	/* activate NVRAM */
14416	S24C16_start(np, &gpreg);
14417
14418	/* write device code and random address MSB */
14419	S24C16_write_byte(np, &ack_data,
14420	0xa0 \| ((offset >> 7) & 0x0e), &gpreg, &gpcntl);
14421	if (ack_data & 0x01)
14422	goto out;
14423
14424	/* write random address LSB */
14425	S24C16_write_byte(np, &ack_data,
14426	offset & 0xff, &gpreg, &gpcntl);
14427	if (ack_data & 0x01)
14428	goto out;
14429
14430	/* regenerate START state to set up for reading */
14431	S24C16_start(np, &gpreg);
14432
14433	/* rewrite device code and address MSB with read bit set (lsb = 0x01) */
14434	S24C16_write_byte(np, &ack_data,
14435	0xa1 \| ((offset >> 7) & 0x0e), &gpreg, &gpcntl);
14436	if (ack_data & 0x01)
14437	goto out;
14438
14439	/* now set up GPIO0 for inputting data */
14440	gpcntl \|= 0x01;
14441	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl) )));
14442
14443	/* input all requested data - only part of total NVRAM */
14444	for (x = 0; x < len; x++)
14445	S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl);
14446
14447	/* finally put NVRAM back in inactive mode */
14448	gpcntl &= 0xfe;
14449	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl) )));
14450	S24C16_stop(np, &gpreg);
14451	retv = 0;
14452	out:
14453	/* return GPIO0/1 to original states after having accessed NVRAM */
14454	OUTB (nc_gpcntl, old_gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((old_gpcntl ))));
14455	OUTB (nc_gpreg, old_gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((old_gpreg ))));
14456
14457	return retv;
14458	}
14459
14460	#undef SET_BIT
14461	#undef CLR_BIT
14462	#undef SET_CLK
14463	#undef CLR_CLK
14464
14465	/*
14466	* Try reading Symbios NVRAM.
14467	* Return 0 if OK.
14468	*/
14469	static int __init sym_read_Symbios_nvram (ncr_slot np, Symbios_nvram nvram)
14470	{
14471	static u_charunsigned char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0};
14472	u_charunsigned char data = (u_charunsigned char ) nvram;
14473	int len = sizeof(*nvram);
14474	u_shortunsigned short csum;
14475	int x;
14476
14477	/* probe the 24c16 and read the SYMBIOS 24c16 area */
14478	if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS0x100, data, len))
14479	return 1;
14480
14481	/* check valid NVRAM signature, verify byte count and checksum */
14482	if (nvram->type != 0 \|\|
14483	memcmp__builtin_memcmp(nvram->trailer, Symbios_trailer, 6) \|\|
14484	nvram->byte_count != len - 12)
14485	return 1;
14486
14487	/* verify checksum */
14488	for (x = 6, csum = 0; x < len - 6; x++)
14489	csum += data[x];
14490	if (csum != nvram->checksum)
14491	return 1;
14492
14493	return 0;
14494	}
14495
14496	/*
14497	* 93C46 EEPROM reading.
14498	*
14499	* GPOI0 - data in
14500	* GPIO1 - data out
14501	* GPIO2 - clock
14502	* GPIO4 - chip select
14503	*
14504	* Used by Tekram.
14505	*/
14506
14507	/*
14508	* Pulse clock bit in GPIO0
14509	*/
14510	static void __init T93C46_Clk(ncr_slot np, u_charunsigned char gpreg)
14511	{
14512	OUTB (nc_gpreg, gpreg \| 0x04)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg \| 0x04))));
14513	UDELAY (2);
14514	OUTB (nc_gpreg, gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg)) ));
14515	}
14516
14517	/*
14518	* Read bit from NVRAM
14519	*/
14520	static void __init T93C46_Read_Bit(ncr_slot np, u_charunsigned char read_bit, u_charunsigned char *gpreg)
14521	{
14522	UDELAY (2);
14523	T93C46_Clk(np, gpreg);
14524	read_bit = INB (nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_gpreg)))));
14525	}
14526
14527	/*
14528	* Write bit to GPIO0
14529	*/
14530	static void __init T93C46_Write_Bit(ncr_slot np, u_charunsigned char write_bit, u_charunsigned char gpreg)
14531	{
14532	if (write_bit & 0x01)
14533	*gpreg \|= 0x02;
14534	else
14535	*gpreg &= 0xfd;
14536
14537	*gpreg \|= 0x10;
14538
14539	OUTB (nc_gpreg, gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg)) ));
14540	UDELAY (2);
14541
14542	T93C46_Clk(np, gpreg);
14543	}
14544
14545	/*
14546	* Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!!
14547	*/
14548	static void __init T93C46_Stop(ncr_slot np, u_charunsigned char gpreg)
14549	{
14550	*gpreg &= 0xef;
14551	OUTB (nc_gpreg, gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg)) ));
14552	UDELAY (2);
14553
14554	T93C46_Clk(np, gpreg);
14555	}
14556
14557	/*
14558	* Send read command and address to NVRAM
14559	*/
14560	static void __init
14561	T93C46_Send_Command(ncr_slot *np, u_shortunsigned short write_data,
14562	u_charunsigned char read_bit, u_charunsigned char gpreg)
14563	{
14564	int x;
14565
14566	/* send 9 bits, start bit (1), command (2), address (6) */
14567	for (x = 0; x < 9; x++)
14568	T93C46_Write_Bit(np, (u_charunsigned char) (write_data >> (8 - x)), gpreg);
14569
14570	read_bit = INB (nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg *)0)->nc_gpreg)))));
14571	}
14572
14573	/*
14574	* READ 2 bytes from the NVRAM
14575	*/
14576	static void __init
14577	T93C46_Read_Word(ncr_slot np, u_shortunsigned short nvram_data, u_charunsigned char *gpreg)
14578	{
14579	int x;
14580	u_charunsigned char read_bit;
14581
14582	*nvram_data = 0;
14583	for (x = 0; x < 16; x++) {
14584	T93C46_Read_Bit(np, &read_bit, gpreg);
14585
14586	if (read_bit & 0x01)
14587	*nvram_data \|= (0x01 << (15 - x));
14588	else
14589	*nvram_data &= ~(0x01 << (15 - x));
14590	}
14591	}
14592
14593	/*
14594	* Read Tekram NvRAM data.
14595	*/
14596	static int __init
14597	T93C46_Read_Data(ncr_slot np, u_shortunsigned short data,int len,u_charunsigned char *gpreg)
14598	{
14599	u_charunsigned char read_bit;
14600	int x;
14601
14602	for (x = 0; x < len; x++) {
14603
14604	/* output read command and address */
14605	T93C46_Send_Command(np, 0x180 \| x, &read_bit, gpreg);
14606	if (read_bit & 0x01)
14607	return 1; /* Bad */
14608	T93C46_Read_Word(np, &data[x], gpreg);
14609	T93C46_Stop(np, gpreg);
14610	}
14611
14612	return 0;
14613	}
14614
14615	/*
14616	* Try reading 93C46 Tekram NVRAM.
14617	*/
14618	static int __init
14619	sym_read_T93C46_nvram (ncr_slot np, Tekram_nvram nvram)
14620	{
14621	u_charunsigned char gpcntl, gpreg;
14622	u_charunsigned char old_gpcntl, old_gpreg;
14623	int retv = 1;
14624
14625	/* save current state of GPCNTL and GPREG */
14626	old_gpreg = INB (nc_gpreg)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpreg)))));
14627	old_gpcntl = INB (nc_gpcntl)((volatile unsigned char ) ((char )np->reg + (((size_t) (&((struct ncr_reg )0)->nc_gpcntl)))));
14628
14629	/* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in,
14630	1/2/4 out */
14631	gpreg = old_gpreg & 0xe9;
14632	OUTB (nc_gpreg, gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((gpreg))) );
14633	gpcntl = (old_gpcntl & 0xe9) \| 0x09;
14634	OUTB (nc_gpcntl, gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((gpcntl) )));
14635
14636	/* input all of NVRAM, 64 words */
14637	retv = T93C46_Read_Data(np, (u_shortunsigned short *) nvram,
14638	sizeof(*nvram) / sizeof(short), &gpreg);
14639
14640	/* return GPIO0/1/2/4 to original states after having accessed NVRAM */
14641	OUTB (nc_gpcntl, old_gpcntl)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpcntl))))) = (((old_gpcntl ))));
14642	OUTB (nc_gpreg, old_gpreg)(((volatile unsigned char ) ((char )np->reg + (((size_t ) (&((struct ncr_reg )0)->nc_gpreg))))) = (((old_gpreg ))));
14643
14644	return retv;
14645	}
14646
14647	/*
14648	* Try reading Tekram NVRAM.
14649	* Return 0 if OK.
14650	*/
14651	static int __init
14652	sym_read_Tekram_nvram (ncr_slot np, u_shortunsigned short device_id, Tekram_nvram nvram)
14653	{
14654	u_charunsigned char data = (u_charunsigned char ) nvram;
14655	int len = sizeof(*nvram);
14656	u_shortunsigned short csum;
14657	int x;
14658
14659	switch (device_id) {
14660	case PCI_DEVICE_ID_NCR_53C8850x000d:
14661	case PCI_DEVICE_ID_NCR_53C8950x000c:
14662	case PCI_DEVICE_ID_NCR_53C8960x000b:
14663	x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS0x40,
14664	data, len);
14665	break;
14666	case PCI_DEVICE_ID_NCR_53C8750x000f:
14667	x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS0x40,
14668	data, len);
14669	if (!x)
14670	break;
14671	default:
14672	x = sym_read_T93C46_nvram(np, nvram);
14673	break;
14674	}
14675	if (x)
14676	return 1;
14677
14678	/* verify checksum */
14679	for (x = 0, csum = 0; x < len - 1; x += 2)
14680	csum += data[x] + (data[x+1] << 8);
14681	if (csum != 0x1234)
14682	return 1;
14683
14684	return 0;
14685	}
14686
14687	#endif /* SCSI_NCR_NVRAM_SUPPORT */
14688
14689	/*
14690	** Module stuff
14691	*/
14692
14693	#ifdef MODULE
14694	Scsi_Host_Template driver_template = SYM53C8XX;
14695	#include "scsi_module.c"
14696	#endif