Bug Summary

File:obj-scan-build/../linux/src/drivers/net/eepro.c
Location:line 423, column 6
Description:Access to field 'name' results in a dereference of a null pointer (loaded from variable 'dev')

Annotated Source Code

1/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
2/*
3 Written 1994-1998 by Bao C. Ha.
4
5 Copyright (C) 1994-1998 by Bao C. Ha.
6
7 This software may be used and distributed
8 according to the terms of the GNU Public License,
9 incorporated herein by reference.
10
11 The author may be reached at bao@hacom.net
12 or Hacom, 2477 Wrightsboro Rd., Augusta, GA 30904.
13
14 Things remaining to do:
15 Better record keeping of errors.
16 Eliminate transmit interrupt to reduce overhead.
17 Implement "concurrent processing". I won't be doing it!
18
19 Bugs:
20
21 If you have a problem of not detecting the 82595 during a
22 reboot (warm reset), disable the FLASH memory should fix it.
23 This is a compatibility hardware problem.
24
25 Versions:
26
27 0.10c Some cosmetic changes. (9/28/98, BCH)
28
29 0.10b Should work now with (some) Pro/10+. At least for
30 me (and my two cards) it does. _No_ guarantee for
31 function with non-Pro/10+ cards! (don't have any)
32 (RMC, 9/11/96)
33
34 0.10 Added support for the Etherexpress Pro/10+. The
35 IRQ map was changed significantly from the old
36 pro/10. The new interrupt map was provided by
37 Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).
38 (BCH, 9/3/96)
39
40 0.09 Fixed a race condition in the transmit algorithm,
41 which causes crashes under heavy load with fast
42 pentium computers. The performance should also
43 improve a bit. The size of RX buffer, and hence
44 TX buffer, can also be changed via lilo or insmod.
45 (BCH, 7/31/96)
46
47 0.08 Implement 32-bit I/O for the 82595TX and 82595FX
48 based lan cards. Disable full-duplex mode if TPE
49 is not used. (BCH, 4/8/96)
50
51 0.07a Fix a stat report which counts every packet as a
52 heart-beat failure. (BCH, 6/3/95)
53
54 0.07 Modified to support all other 82595-based lan cards.
55 The IRQ vector of the EtherExpress Pro will be set
56 according to the value saved in the EEPROM. For other
57 cards, I will do autoirq_request() to grab the next
58 available interrupt vector. (BCH, 3/17/95)
59
60 0.06a,b Interim released. Minor changes in the comments and
61 print out format. (BCH, 3/9/95 and 3/14/95)
62
63 0.06 First stable release that I am comfortable with. (BCH,
64 3/2/95)
65
66 0.05 Complete testing of multicast. (BCH, 2/23/95)
67
68 0.04 Adding multicast support. (BCH, 2/14/95)
69
70 0.03 First widely alpha release for public testing.
71 (BCH, 2/14/95)
72
73*/
74
75static const char *version =
76 "eepro.c: v0.10c 9/28/98 Bao C. Ha (bao@hacom.net)\n";
77
78#include <linux/module.h>
79
80/*
81 Sources:
82
83 This driver wouldn't have been written without the availability
84 of the Crynwr's Lan595 driver source code. It helps me to
85 familiarize with the 82595 chipset while waiting for the Intel
86 documentation. I also learned how to detect the 82595 using
87 the packet driver's technique.
88
89 This driver is written by cutting and pasting the skeleton.c driver
90 provided by Donald Becker. I also borrowed the EEPROM routine from
91 Donald Becker's 82586 driver.
92
93 Datasheet for the Intel 82595 (including the TX and FX version). It
94 provides just enough info that the casual reader might think that it
95 documents the i82595.
96
97 The User Manual for the 82595. It provides a lot of the missing
98 information.
99
100*/
101
102#include <linux/kernel.h>
103#include <linux/sched.h>
104#include <linux/types.h>
105#include <linux/fcntl.h>
106#include <linux/interrupt.h>
107#include <linux/ptrace.h>
108#include <linux/ioport.h>
109#include <linux/in.h>
110#include <linux/malloc.h>
111#include <linux/string.h>
112#include <asm/system.h>
113#include <asm/bitops.h>
114#include <asm/io.h>
115#include <asm/dma.h>
116#include <linux/errno.h>
117
118#include <linux/netdevice.h>
119#include <linux/etherdevice.h>
120#include <linux/skbuff.h>
121
122/* First, a few definitions that the brave might change. */
123
124/* A zero-terminated list of I/O addresses to be probed. */
125static unsigned int eepro_portlist[] =
126 { 0x300, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
127
128/* use 0 for production, 1 for verification, >2 for debug */
129
130#ifndef NET_DEBUG1
131#define NET_DEBUG1 1
132#endif
133
134static unsigned int net_debug = NET_DEBUG1;
135
136/* The number of low I/O ports used by the ethercard. */
137
138#define EEPRO_IO_EXTENT16 16
139
140/* Different 82595 chips */
141
142#define LAN5950 0
143#define LAN595TX1 1
144#define LAN595FX2 2
145
146/* Information that need to be kept for each board. */
147struct eepro_local {
148 struct enet_statistics stats;
149 unsigned rx_start;
150 unsigned tx_start; /* start of the transmit chain */
151 int tx_last; /* pointer to last packet in the transmit chain */
152 unsigned tx_end; /* end of the transmit chain (plus 1) */
153 int eepro; /* 1 for the EtherExpress Pro/10,
154 2 for the EtherExpress Pro/10+,
155 0 for other 82595-based lan cards. */
156 int version; /* a flag to indicate if this is a TX or FX
157 version of the 82595 chip. */
158 int stepping;
159};
160
161/* The station (ethernet) address prefix, used for IDing the board. */
162
163#define SA_ADDR00x00 0x00 /* Etherexpress Pro/10 */
164#define SA_ADDR10xaa 0xaa
165#define SA_ADDR20x00 0x00
166
167#define SA2_ADDR00x00 0x00 /* Etherexpress Pro/10+ */
168#define SA2_ADDR10xa0 0xa0
169#define SA2_ADDR20xc9 0xc9
170
171#define SA3_ADDR00x00 0x00 /* more Etherexpress Pro/10+ */
172#define SA3_ADDR10xaa 0xaa
173#define SA3_ADDR20x00 0x00
174#define SA3_ADDR30xc9 0xc9
175
176/* Index to functions, as function prototypes. */
177
178extern int eepro_probe(struct devicelinux_device *dev);
179
180static int eepro_probe1(struct devicelinux_device *dev, short ioaddr);
181static int eepro_open(struct devicelinux_device *dev);
182static int eepro_send_packet(struct sk_buff *skb, struct devicelinux_device *dev);
183static void eepro_interrupt(int irq, void *dev_id, struct pt_regs *regs);
184static void eepro_rx(struct devicelinux_device *dev);
185static void eepro_transmit_interrupt(struct devicelinux_device *dev);
186static int eepro_close(struct devicelinux_device *dev);
187static struct enet_statistics *eepro_get_stats(struct devicelinux_device *dev);
188static void set_multicast_list(struct devicelinux_device *dev);
189
190static int read_eeprom(int ioaddr, int location);
191static void hardware_send_packet(struct devicelinux_device *dev, void *buf, short length);
192static int eepro_grab_irq(struct devicelinux_device *dev);
193
194/*
195 Details of the i82595.
196
197You will need either the datasheet or the user manual to understand what
198is going on here. The 82595 is very different from the 82586, 82593.
199
200The receive algorithm in eepro_rx() is just an implementation of the
201RCV ring structure that the Intel 82595 imposes at the hardware level.
202The receive buffer is set at 24K, and the transmit buffer is 8K. I
203am assuming that the total buffer memory is 32K, which is true for the
204Intel EtherExpress Pro/10. If it is less than that on a generic card,
205the driver will be broken.
206
207The transmit algorithm in the hardware_send_packet() is similar to the
208one in the eepro_rx(). The transmit buffer is a ring linked list.
209I just queue the next available packet to the end of the list. In my
210system, the 82595 is so fast that the list seems to always contain a
211single packet. In other systems with faster computers and more congested
212network traffics, the ring linked list should improve performance by
213allowing up to 8K worth of packets to be queued.
214
215The sizes of the receive and transmit buffers can now be changed via lilo
216or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"
217where rx-buffer is in KB unit. Modules uses the parameter mem which is
218also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."
219The receive buffer has to be more than 3K or less than 29K. Otherwise,
220it is reset to the default of 24K, and, hence, 8K for the trasnmit
221buffer (transmit-buffer = 32K - receive-buffer).
222
223*/
224
225#define RAM_SIZE0x8000 0x8000
226#define RCV_HEADER8 8
227#define RCV_RAM0x6000 0x6000 /* 24KB default for RCV buffer */
228#define RCV_LOWER_LIMIT0x00 0x00 /* 0x0000 */
229
230/* #define RCV_UPPER_LIMIT ((RCV_RAM - 2) >> 8) */ /* 0x5ffe */
231#define RCV_UPPER_LIMIT(((rcv_ram) - 2) >> 8) (((rcv_ram) - 2) >> 8)
232
233/* #define XMT_RAM (RAM_SIZE - RCV_RAM) */ /* 8KB for XMT buffer */
234#define XMT_RAM(0x8000 - (rcv_ram)) (RAM_SIZE0x8000 - (rcv_ram)) /* 8KB for XMT buffer */
235
236/* #define XMT_LOWER_LIMIT (RCV_RAM >> 8) */ /* 0x6000 */
237#define XMT_LOWER_LIMIT((rcv_ram) >> 8) ((rcv_ram) >> 8)
238#define XMT_UPPER_LIMIT((0x8000 - 2) >> 8) ((RAM_SIZE0x8000 - 2) >> 8) /* 0x7ffe */
239#define XMT_HEADER8 8
240
241#define RCV_DONE0x0008 0x0008
242#define RX_OK0x2000 0x2000
243#define RX_ERROR0x0d81 0x0d81
244
245#define TX_DONE_BIT0x0080 0x0080
246#define CHAIN_BIT0x8000 0x8000
247#define XMT_STATUS0x02 0x02
248#define XMT_CHAIN0x04 0x04
249#define XMT_COUNT0x06 0x06
250
251#define BANK0_SELECT0x00 0x00
252#define BANK1_SELECT0x40 0x40
253#define BANK2_SELECT0x80 0x80
254
255/* Bank 0 registers */
256
257#define COMMAND_REG0x00 0x00 /* Register 0 */
258#define MC_SETUP0x03 0x03
259#define XMT_CMD0x04 0x04
260#define DIAGNOSE_CMD0x07 0x07
261#define RCV_ENABLE_CMD0x08 0x08
262#define RCV_DISABLE_CMD0x0a 0x0a
263#define STOP_RCV_CMD0x0b 0x0b
264#define RESET_CMD0x0e 0x0e
265#define POWER_DOWN_CMD0x18 0x18
266#define RESUME_XMT_CMD0x1c 0x1c
267#define SEL_RESET_CMD0x1e 0x1e
268#define STATUS_REG0x01 0x01 /* Register 1 */
269#define RX_INT0x02 0x02
270#define TX_INT0x04 0x04
271#define EXEC_STATUS0x30 0x30
272#define ID_REG0x02 0x02 /* Register 2 */
273#define R_ROBIN_BITS0xc0 0xc0 /* round robin counter */
274#define ID_REG_MASK0x2c 0x2c
275#define ID_REG_SIG0x24 0x24
276#define AUTO_ENABLE0x10 0x10
277#define INT_MASK_REG0x03 0x03 /* Register 3 */
278#define RX_STOP_MASK0x01 0x01
279#define RX_MASK0x02 0x02
280#define TX_MASK0x04 0x04
281#define EXEC_MASK0x08 0x08
282#define ALL_MASK0x0f 0x0f
283#define IO_32_BIT0x10 0x10
284#define RCV_BAR0x04 0x04 /* The following are word (16-bit) registers */
285#define RCV_STOP0x06 0x06
286#define XMT_BAR0x0a 0x0a
287#define HOST_ADDRESS_REG0x0c 0x0c
288#define IO_PORT0x0e 0x0e
289#define IO_PORT_32_BIT0x0c 0x0c
290
291/* Bank 1 registers */
292
293#define REG10x01 0x01
294#define WORD_WIDTH0x02 0x02
295#define INT_ENABLE0x80 0x80
296#define INT_NO_REG0x02 0x02
297#define RCV_LOWER_LIMIT_REG0x08 0x08
298#define RCV_UPPER_LIMIT_REG0x09 0x09
299#define XMT_LOWER_LIMIT_REG0x0a 0x0a
300#define XMT_UPPER_LIMIT_REG0x0b 0x0b
301
302/* Bank 2 registers */
303
304#define XMT_Chain_Int0x20 0x20 /* Interrupt at the end of the transmit chain */
305#define XMT_Chain_ErrStop0x40 0x40 /* Interrupt at the end of the chain even if there are errors */
306#define RCV_Discard_BadFrame0x80 0x80 /* Throw bad frames away, and continue to receive others */
307#define REG20x02 0x02
308#define PRMSC_Mode0x01 0x01
309#define Multi_IA0x20 0x20
310#define REG30x03 0x03
311#define TPE_BIT0x04 0x04
312#define BNC_BIT0x20 0x20
313#define REG130x0d 0x0d
314#define FDX0x00 0x00
315#define A_N_ENABLE0x02 0x02
316
317#define I_ADD_REG00x04 0x04
318#define I_ADD_REG10x05 0x05
319#define I_ADD_REG20x06 0x06
320#define I_ADD_REG30x07 0x07
321#define I_ADD_REG40x08 0x08
322#define I_ADD_REG50x09 0x09
323
324#define EEPROM_REG0x0a 0x0a
325#define EESK0x01 0x01
326#define EECS0x02 0x02
327#define EEDI0x04 0x04
328#define EEDO0x08 0x08
329
330/* Check for a network adaptor of this type, and return '0' if one exists.
331
332 If dev->base_addr == 0, probe all likely locations.
333 If dev->base_addr == 1, always return failure.
334 If dev->base_addr == 2, allocate space for the device and return success
335 (detachable devices only).
336
337 */
338
339#ifdef HAVE_DEVLIST
340
341/* Support for a alternate probe manager, which will eliminate the
342 boilerplate below. */
343
344struct netdev_entry netcard_drv =
345{"eepro", eepro_probe1, EEPRO_IO_EXTENT16, eepro_portlist};
346
347#else
348
349int
350eepro_probe(struct devicelinux_device *dev)
351{
352 int i;
353 int base_addr = dev ? dev->base_addr : 0;
1
Assuming 'dev' is null
→
2
←
'?' condition is false
→
354
355 if (base_addr > 0x1ff) /* Check a single specified location. */
3
←
Taking false branch
→
356 return eepro_probe1(dev, base_addr);
357 else if (base_addr != 0) /* Don't probe at all. */
4
←
Taking false branch
→
358 return ENXIO6;
359
360 for (i = 0; eepro_portlist[i]; i++) {
5
←
Loop condition is true. Entering loop body
→
361 int ioaddr = eepro_portlist[i];
362 if (check_region(ioaddr, EEPRO_IO_EXTENT16))
6
←
Taking false branch
→
363 continue;
364
365 if (eepro_probe1(dev, ioaddr) == 0)
7
←
Passing null pointer value via 1st parameter 'dev'
→
8
←
Calling 'eepro_probe1'
→
366 return 0;
367 }
368
369 return ENODEV19;
370}
371#endif
372
373/* This is the real probe routine. Linux has a history of friendly device
374 probes on the ISA bus. A good device probes avoids doing writes, and
375 verifies that the correct device exists and functions. */
376
377int
378eepro_probe1(struct devicelinux_device *dev, short ioaddr)
379{
380 unsigned short station_addr[6], id, counter;
381 int i;
382 int eepro;
383 const char *ifmap[] = {"AUI", "10Base2", "10BaseT"};
384 enum iftype { AUI=0, BNC=1, TPE=2 };
385
386 /* Now, we are going to check for the signature of the
387 ID_REG (register 2 of bank 0) */
388 if (((id=inb(ioaddr + ID_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02))) & ID_REG_MASK0x2c) == ID_REG_SIG0x24) {
9
←
Taking true branch
→
389
390 /* We seem to have the 82595 signature, let's
391 play with its counter (last 2 bits of
392 register 2 of bank 0) to be sure. */
393
394 counter = (id & R_ROBIN_BITS0xc0);
395 if (((id=inb(ioaddr+ID_REG)((__builtin_constant_p((ioaddr+0x02)) && (ioaddr+0x02
) < 256) ? __inbc(ioaddr+0x02) : __inb(ioaddr+0x02))) & R_ROBIN_BITS0xc0) ==
10
←
Taking true branch
→
396 (counter + 0x40)) {
397
398 /* Yes, the 82595 has been found */
399
400 /* Now, get the ethernet hardware address from
401 the EEPROM */
402
403 station_addr[0] = read_eeprom(ioaddr, 2);
404 station_addr[1] = read_eeprom(ioaddr, 3);
405 station_addr[2] = read_eeprom(ioaddr, 4);
406
407 /* Check the station address for the manufacturer's code */
408
409 if ((station_addr[2] == 0x00aa) && (station_addr[1]!= 0x00c9)) {
410 eepro = 1;
411 printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",
412 dev->name, ioaddr);
413 } else
414 if ( (station_addr[2] == 0x00a0)
415 || ((station_addr[2] == 0x00aa) && (station_addr[1] == 0x00c9) )) {
416 eepro = 2;
417 printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
418 dev->name, ioaddr);
419 }
420 else {
421 eepro = 0;
422 printk("%s: Intel 82595-based lan card at %#x,",
423 dev->name, ioaddr);
11
←
Access to field 'name' results in a dereference of a null pointer (loaded from variable 'dev')
424 }
425
426 /* Fill in the 'dev' fields. */
427 dev->base_addr = ioaddr;
428
429 for (i=0; i < 6; i++) {
430 dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
431 printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
432 }
433
434 if ((dev->mem_end & 0x3f) < 3 || /* RX buffer must be more than 3K */
435 (dev->mem_end & 0x3f) > 29) /* and less than 29K */
436 dev->mem_end = RCV_RAM0x6000; /* or it will be set to 24K */
437 else dev->mem_end = 1024*dev->mem_end; /* Maybe I should shift << 10 */
438
439 /* From now on, dev->mem_end contains the actual size of rx buffer */
440
441 if (net_debug > 3)
442 printk(", %dK RCV buffer", (int)(dev->mem_end)/1024);
443
444 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
445 id = inb(ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
446 if (id & TPE_BIT0x04)
447 dev->if_port = TPE;
448 else dev->if_port = BNC;
449
450 if (net_debug>3)
451 printk("id: %x\n", id);
452
453 if (dev->irq < 2 && eepro) {
454 i = read_eeprom(ioaddr, 1);
455 if (eepro == 1)
456 switch (i & 0x07) {
457 case 0: dev->irq = 9; break;
458 case 1: dev->irq = 3; break;
459 case 2: dev->irq = 5; break;
460 case 3: dev->irq = 10; break;
461 case 4: dev->irq = 11; break;
462 default: /* should never get here !!!!! */
463 printk(" illegal interrupt vector stored in EEPROM.\n");
464 return ENODEV19;
465 }
466 else switch (i & 0x07) {
467 case 0: dev->irq = 3; break;
468 case 1: dev->irq = 4; break;
469 case 2: dev->irq = 5; break;
470 case 3: dev->irq = 7; break;
471 case 4: dev->irq = 9; break;
472 case 5: dev->irq = 10; break;
473 case 6: dev->irq = 11; break;
474 case 7: dev->irq = 12; break;
475 }
476 }
477 else if (dev->irq == 2)
478 dev->irq = 9;
479
480 if (dev->irq > 2) {
481 printk(", IRQ %d, %s.\n", dev->irq,
482 ifmap[dev->if_port]);
483 if (request_irq(dev->irq, &eepro_interrupt, 0, "eepro", NULL((void *) 0))) {
484 printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
485 return -EAGAIN11;
486 }
487 }
488 else printk(", %s.\n", ifmap[dev->if_port]);
489
490 if ((dev->mem_start & 0xf) > 0) /* I don't know if this is */
491 net_debug = dev->mem_start & 7; /* still useful or not */
492
493 if (net_debug > 3) {
494 i = read_eeprom(ioaddr, 5);
495 if (i & 0x2000) /* bit 13 of EEPROM word 5 */
496 printk("%s: Concurrent Processing is enabled but not used!\n",
497 dev->name);
498 }
499
500 if (net_debug)
501 printk(version);
502
503 /* Grab the region so we can find another board if autoIRQ fails. */
504 request_region(ioaddr, EEPRO_IO_EXTENT16, "eepro");
505
506 /* Initialize the device structure */
507 dev->priv = kmalloclinux_kmalloc(sizeof(struct eepro_local), GFP_KERNEL0x03);
508 if (dev->priv == NULL((void *) 0))
509 return -ENOMEM12;
510 memset(dev->priv, 0, sizeof(struct eepro_local))(__builtin_constant_p(0) ? (__builtin_constant_p((sizeof(struct
eepro_local))) ? __constant_c_and_count_memset(((dev->priv
)),((0x01010101UL*(unsigned char)(0))),((sizeof(struct eepro_local
)))) : __constant_c_memset(((dev->priv)),((0x01010101UL*(unsigned
char)(0))),((sizeof(struct eepro_local))))) : (__builtin_constant_p
((sizeof(struct eepro_local))) ? __memset_generic((((dev->
priv))),(((0))),(((sizeof(struct eepro_local))))) : __memset_generic
(((dev->priv)),((0)),((sizeof(struct eepro_local))))));
511
512 dev->open = eepro_open;
513 dev->stop = eepro_close;
514 dev->hard_start_xmit = eepro_send_packet;
515 dev->get_stats = eepro_get_stats;
516 dev->set_multicast_list = &set_multicast_list;
517
518 /* Fill in the fields of the device structure with
519 ethernet generic values */
520
521 ether_setup(dev);
522
523 outb(RESET_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x0e),(ioaddr)) : __outb((0x0e),(ioaddr))); /* RESET the 82595 */
524
525 return 0;
526 }
527 else return ENODEV19;
528 }
529 else if (net_debug > 3)
530 printk ("EtherExpress Pro probed failed!\n");
531 return ENODEV19;
532}
533
534/* Open/initialize the board. This is called (in the current kernel)
535 sometime after booting when the 'ifconfig' program is run.
536
537 This routine should set everything up anew at each open, even
538 registers that "should" only need to be set once at boot, so that
539 there is non-reboot way to recover if something goes wrong.
540 */
541
542static char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
543static char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
544
545static int
546eepro_grab_irq(struct devicelinux_device *dev)
547{
548 int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12 };
549 int *irqp = irqlist, temp_reg, ioaddr = dev->base_addr;
550
551 outb(BANK1_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x40),(ioaddr)) : __outb((0x40),(ioaddr))); /* be CAREFUL, BANK 1 now */
552
553 /* Enable the interrupt line. */
554 temp_reg = inb(ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01));
555 outb(temp_reg | INT_ENABLE, ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg | 0x80),(ioaddr + 0x01)) : __outb
((temp_reg | 0x80),(ioaddr + 0x01)));
556
557 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* be CAREFUL, BANK 0 now */
558
559 /* clear all interrupts */
560 outb(ALL_MASK, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x0f),(ioaddr + 0x01)) : __outb((0x0f)
,(ioaddr + 0x01)));
561
562 /* Let EXEC event to interrupt */
563 outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x08)),(ioaddr + 0x03)) :
__outb((0x0f & ~(0x08)),(ioaddr + 0x03)));
564
565 do {
566 outb(BANK1_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x40),(ioaddr)) : __outb((0x40),(ioaddr))); /* be CAREFUL, BANK 1 now */
567 temp_reg = inb(ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
568 outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc(((temp_reg & 0xf8) | irqrmap[*irqp]
),(ioaddr + 0x02)) : __outb(((temp_reg & 0xf8) | irqrmap[
*irqp]),(ioaddr + 0x02)));
569 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Switch back to Bank 0 */
570 if (request_irq (*irqp, NULL((void *) 0), 0, "bogus", NULL((void *) 0)) != EBUSY16) {
571 /* Twinkle the interrupt, and check if it's seen */
572 autoirq_setup(0);
573 outb(DIAGNOSE_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x07),(ioaddr)) : __outb((0x07),(ioaddr))); /* RESET the 82595 */
574
575 if (*irqp == autoirq_report(2) && /* It's a good IRQ line */
576 (request_irq(dev->irq = *irqp, &eepro_interrupt, 0, "eepro", NULL((void *) 0)) == 0))
577 break;
578 /* clear all interrupts */
579 outb(ALL_MASK, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x0f),(ioaddr + 0x01)) : __outb((0x0f)
,(ioaddr + 0x01)));
580 }
581 } while (*++irqp);
582
583 outb(BANK1_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x40),(ioaddr)) : __outb((0x40),(ioaddr))); /* Switch back to Bank 1 */
584
585 /* Disable the physical interrupt line. */
586 temp_reg = inb(ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01));
587 outb(temp_reg & 0x7f, ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg & 0x7f),(ioaddr + 0x01)) :
__outb((temp_reg & 0x7f),(ioaddr + 0x01)));
588 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Switch back to Bank 0 */
589
590 /* Mask all the interrupts. */
591 outb(ALL_MASK, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f),(ioaddr + 0x03)) : __outb((0x0f)
,(ioaddr + 0x03)));
592
593 /* clear all interrupts */
594 outb(ALL_MASK, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x0f),(ioaddr + 0x01)) : __outb((0x0f)
,(ioaddr + 0x01)));
595
596 return dev->irq;
597}
598
599static int
600eepro_open(struct devicelinux_device *dev)
601{
602 unsigned short temp_reg, old8, old9;
603 int i, ioaddr = dev->base_addr, rcv_ram = dev->mem_end;
604 struct eepro_local *lp = (struct eepro_local *)dev->priv;
605
606 if (net_debug > 3)
607 printk("eepro: entering eepro_open routine.\n");
608
609 if ((dev->dev_addr[0] == SA_ADDR00x00 &&
610 dev->dev_addr[1] == SA_ADDR10xaa &&
611 dev->dev_addr[2] == SA_ADDR20x00)&&
612 (dev->dev_addr[3] != SA3_ADDR30xc9))
613 {
614 lp->eepro = 1;
615 if (net_debug > 3) printk("p->eepro = 1;\n");
616 } /* Yes, an Intel EtherExpress Pro/10 */
617
618 else if ((dev->dev_addr[0] == SA2_ADDR00x00 &&
619 dev->dev_addr[1] == SA2_ADDR10xa0 &&
620 dev->dev_addr[2] == SA2_ADDR20xc9)||
621 (dev->dev_addr[0] == SA3_ADDR00x00 &&
622 dev->dev_addr[1] == SA3_ADDR10xaa &&
623 dev->dev_addr[2] == SA3_ADDR20x00 &&
624 dev->dev_addr[3] == SA3_ADDR30xc9))
625 {
626 lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */
627 if (net_debug > 3) printk("p->eepro = 2;\n");
628 }
629
630 else lp->eepro = 0; /* No, it is a generic 82585 lan card */
631
632 /* Get the interrupt vector for the 82595 */
633 if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
634 printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
635 return -EAGAIN11;
636 }
637
638 if (irq2dev_map[dev->irq] != 0
639 || (irq2dev_map[dev->irq] = dev) == 0)
640 return -EAGAIN11;
641
642 /* Initialize the 82595. */
643 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
644 temp_reg = inb(ioaddr + EEPROM_REG)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __inbc(ioaddr + 0x0a) : __inb(ioaddr + 0x0a));
645 lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */
646
647 if (net_debug > 3)
648 printk("The stepping of the 82595 is %d\n", lp->stepping);
649 if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
650 outb(temp_reg & 0xef, ioaddr + EEPROM_REG)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __outbc((temp_reg & 0xef),(ioaddr + 0x0a)) :
__outb((temp_reg & 0xef),(ioaddr + 0x0a)));
651 for (i=0; i < 6; i++)
652 outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i)((__builtin_constant_p((ioaddr + 0x04 + i)) && (ioaddr
+ 0x04 + i) < 256) ? __outbc((dev->dev_addr[i]),(ioaddr
+ 0x04 + i)) : __outb((dev->dev_addr[i]),(ioaddr + 0x04 +
i)));
653
654 temp_reg = inb(ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01)); /* Setup Transmit Chaining */
655 outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg | 0x20 | 0x40 | 0x80),(ioaddr
+ 0x01)) : __outb((temp_reg | 0x20 | 0x40 | 0x80),(ioaddr + 0x01
)))
656 | RCV_Discard_BadFrame, ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg | 0x20 | 0x40 | 0x80),(ioaddr
+ 0x01)) : __outb((temp_reg | 0x20 | 0x40 | 0x80),(ioaddr + 0x01
)));
657 temp_reg = inb(ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02)); /* Match broadcast */
658 outb(temp_reg | 0x14, ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc((temp_reg | 0x14),(ioaddr + 0x02)) : __outb
((temp_reg | 0x14),(ioaddr + 0x02)));
659 temp_reg = inb(ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
660 outb(temp_reg & 0x3f, ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((temp_reg & 0x3f),(ioaddr + 0x03)) :
__outb((temp_reg & 0x3f),(ioaddr + 0x03))); /* clear test mode */
661
662 /* Set the receiving mode */
663 outb(BANK1_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x40),(ioaddr)) : __outb((0x40),(ioaddr))); /* be CAREFUL, BANK 1 now */
664
665 /* Set the interrupt vector */
666 temp_reg = inb(ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
667
668 if (lp->eepro == 2)
669 outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc(((temp_reg & 0xf8) | irqrmap2[dev->
irq]),(ioaddr + 0x02)) : __outb(((temp_reg & 0xf8) | irqrmap2
[dev->irq]),(ioaddr + 0x02)));
670 else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc(((temp_reg & 0xf8) | irqrmap[dev->
irq]),(ioaddr + 0x02)) : __outb(((temp_reg & 0xf8) | irqrmap
[dev->irq]),(ioaddr + 0x02)));
671
672 temp_reg = inb(ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
673
674 if (lp->eepro == 2)
675 outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG)((__builtin_constant_p((ioaddr+0x02)) && (ioaddr+0x02
) < 256) ? __outbc(((temp_reg & 0xf0) | irqrmap2[dev->
irq] | 0x08),(ioaddr+0x02)) : __outb(((temp_reg & 0xf0) |
irqrmap2[dev->irq] | 0x08),(ioaddr+0x02)));
676 else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc(((temp_reg & 0xf8) | irqrmap[dev->
irq]),(ioaddr + 0x02)) : __outb(((temp_reg & 0xf8) | irqrmap
[dev->irq]),(ioaddr + 0x02)));
677
678 if (net_debug > 3)
679 printk("eepro_open: content of INT Reg is %x\n", temp_reg);
680
681
682 /* Initialize the RCV and XMT upper and lower limits */
683 outb(RCV_LOWER_LIMIT, ioaddr + RCV_LOWER_LIMIT_REG)((__builtin_constant_p((ioaddr + 0x08)) && (ioaddr + 0x08
) < 256) ? __outbc((0x00),(ioaddr + 0x08)) : __outb((0x00)
,(ioaddr + 0x08)));
684 outb(RCV_UPPER_LIMIT, ioaddr + RCV_UPPER_LIMIT_REG)((__builtin_constant_p((ioaddr + 0x09)) && (ioaddr + 0x09
) < 256) ? __outbc(((((rcv_ram) - 2) >> 8)),(ioaddr +
0x09)) : __outb(((((rcv_ram) - 2) >> 8)),(ioaddr + 0x09
)));
685 outb(XMT_LOWER_LIMIT, ioaddr + XMT_LOWER_LIMIT_REG)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __outbc((((rcv_ram) >> 8)),(ioaddr + 0x0a
)) : __outb((((rcv_ram) >> 8)),(ioaddr + 0x0a)));
686 outb(XMT_UPPER_LIMIT, ioaddr + XMT_UPPER_LIMIT_REG)((__builtin_constant_p((ioaddr + 0x0b)) && (ioaddr + 0x0b
) < 256) ? __outbc((((0x8000 - 2) >> 8)),(ioaddr + 0x0b
)) : __outb((((0x8000 - 2) >> 8)),(ioaddr + 0x0b)));
687
688 /* Enable the interrupt line. */
689 temp_reg = inb(ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01));
690 outb(temp_reg | INT_ENABLE, ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg | 0x80),(ioaddr + 0x01)) : __outb
((temp_reg | 0x80),(ioaddr + 0x01)));
691 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Switch back to Bank 0 */
692
693 /* Let RX and TX events to interrupt */
694 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03
)) : __outb((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03)));
695
696 /* clear all interrupts */
697 outb(ALL_MASK, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x0f),(ioaddr + 0x01)) : __outb((0x0f)
,(ioaddr + 0x01)));
698
699 /* Initialize RCV */
700 outw(RCV_LOWER_LIMIT << 8, ioaddr + RCV_BAR)((__builtin_constant_p((ioaddr + 0x04)) && (ioaddr + 0x04
) < 256) ? __outwc((0x00 << 8),(ioaddr + 0x04)) : __outw
((0x00 << 8),(ioaddr + 0x04)));
701 lp->rx_start = (RCV_LOWER_LIMIT0x00 << 8) ;
702 outw((RCV_UPPER_LIMIT << 8) | 0xfe, ioaddr + RCV_STOP)((__builtin_constant_p((ioaddr + 0x06)) && (ioaddr + 0x06
) < 256) ? __outwc((((((rcv_ram) - 2) >> 8) <<
8) | 0xfe),(ioaddr + 0x06)) : __outw((((((rcv_ram) - 2) >>
8) << 8) | 0xfe),(ioaddr + 0x06)));
703
704 /* Initialize XMT */
705 outw(XMT_LOWER_LIMIT << 8, ioaddr + XMT_BAR)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __outwc((((rcv_ram) >> 8) << 8),(ioaddr
+ 0x0a)) : __outw((((rcv_ram) >> 8) << 8),(ioaddr
+ 0x0a)));
706
707 /* Check for the i82595TX and i82595FX */
708 old8 = inb(ioaddr + 8)((__builtin_constant_p((ioaddr + 8)) && (ioaddr + 8) <
256) ? __inbc(ioaddr + 8) : __inb(ioaddr + 8));
709 outb(~old8, ioaddr + 8)((__builtin_constant_p((ioaddr + 8)) && (ioaddr + 8) <
256) ? __outbc((~old8),(ioaddr + 8)) : __outb((~old8),(ioaddr
+ 8)));
710
711 if ((temp_reg = inb(ioaddr + 8)((__builtin_constant_p((ioaddr + 8)) && (ioaddr + 8) <
256) ? __inbc(ioaddr + 8) : __inb(ioaddr + 8))) == old8) {
712 if (net_debug > 3)
713 printk("i82595 detected!\n");
714 lp->version = LAN5950;
715 }
716 else {
717 lp->version = LAN595TX1;
718 outb(old8, ioaddr + 8)((__builtin_constant_p((ioaddr + 8)) && (ioaddr + 8) <
256) ? __outbc((old8),(ioaddr + 8)) : __outb((old8),(ioaddr +
8)));
719 old9 = inb(ioaddr + 9)((__builtin_constant_p((ioaddr + 9)) && (ioaddr + 9) <
256) ? __inbc(ioaddr + 9) : __inb(ioaddr + 9));
720 outb(~old9, ioaddr + 9)((__builtin_constant_p((ioaddr + 9)) && (ioaddr + 9) <
256) ? __outbc((~old9),(ioaddr + 9)) : __outb((~old9),(ioaddr
+ 9)));
721
722 if (((temp_reg = inb(ioaddr + 9)((__builtin_constant_p((ioaddr + 9)) && (ioaddr + 9) <
256) ? __inbc(ioaddr + 9) : __inb(ioaddr + 9))) == ( (~old9)&0xff) )) {
723 enum iftype { AUI=0, BNC=1, TPE=2 };
724
725 if (net_debug > 3) {
726 printk("temp_reg: %#x ~old9: %#x\n",temp_reg, ~old9);
727 printk("i82595FX detected!\n");
728 }
729
730 lp->version = LAN595FX2;
731 outb(old9, ioaddr + 9)((__builtin_constant_p((ioaddr + 9)) && (ioaddr + 9) <
256) ? __outbc((old9),(ioaddr + 9)) : __outb((old9),(ioaddr +
9)));
732
733 if (dev->if_port != TPE) { /* Hopefully, this will fix the
734 problem of using Pentiums and
735 pro/10 w/ BNC. */
736 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
737 temp_reg = inb(ioaddr + REG13)((__builtin_constant_p((ioaddr + 0x0d)) && (ioaddr + 0x0d
) < 256) ? __inbc(ioaddr + 0x0d) : __inb(ioaddr + 0x0d));
738
739 /* disable the full duplex mode since it is not
740 applicable with the 10Base2 cable. */
741 outb(temp_reg & ~(FDX | A_N_ENABLE), REG13)((__builtin_constant_p((0x0d)) && (0x0d) < 256) ? __outbc
((temp_reg & ~(0x00 | 0x02)),(0x0d)) : __outb((temp_reg &
~(0x00 | 0x02)),(0x0d)));
742 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* be CAREFUL, BANK 0 now */
743 }
744 }
745 else if (net_debug > 3) {
746 printk("temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff));
747 printk("i82595TX detected!\n");
748 }
749 }
750
751 outb(SEL_RESET_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x1e),(ioaddr)) : __outb((0x1e),(ioaddr)));
752
753 /* We are supposed to wait for 2 us after a SEL_RESET */
754 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
755 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
756
757 lp->tx_start = lp->tx_end = XMT_LOWER_LIMIT((rcv_ram) >> 8) << 8; /* or = RCV_RAM */
758 lp->tx_last = 0;
759
760 dev->tbusy = 0;
761 dev->interrupt = 0;
762 dev->start = 1;
763
764 if (net_debug > 3)
765 printk("eepro: exiting eepro_open routine.\n");
766
767 outb(RCV_ENABLE_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x08),(ioaddr)) : __outb((0x08),(ioaddr)));
768 MOD_INC_USE_COUNTdo { } while (0);
769
770 return 0;
771}
772
773static int
774eepro_send_packet(struct sk_buff *skb, struct devicelinux_device *dev)
775{
776 struct eepro_local *lp = (struct eepro_local *)dev->priv;
777 int ioaddr = dev->base_addr;
778 int rcv_ram = dev->mem_end;
779
780 if (net_debug > 5)
781 printk("eepro: entering eepro_send_packet routine.\n");
782
783 if (dev->tbusy) {
784 /* If we get here, some higher level has decided we are broken.
785 There should really be a "kick me" function call instead. */
786
787 int tickssofar = jiffies - dev->trans_start;
788
789 if (tickssofar < 40)
790 return 1;
791
792 if (net_debug > 1)
793 printk("%s: transmit timed out, %s?\n", dev->name,
794 "network cable problem");
795
796 lp->stats.tx_errors++;
797
798 /* Try to restart the adaptor. */
799 outb(SEL_RESET_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x1e),(ioaddr)) : __outb((0x1e),(ioaddr)));
800
801 /* We are supposed to wait for 2 us after a SEL_RESET */
802 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
803 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
804
805 /* Do I also need to flush the transmit buffers here? YES? */
806 lp->tx_start = lp->tx_end = rcv_ram;
807 lp->tx_last = 0;
808
809 dev->tbusy=0;
810 dev->trans_start = jiffies;
811 outb(RCV_ENABLE_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x08),(ioaddr)) : __outb((0x08),(ioaddr)));
812 }
813
814 /* If some higher layer thinks we've missed an tx-done interrupt
815 we are passed NULL. Caution: dev_tint() handles the cli()/sti()
816 itself. */
817
818 if (skb == NULL((void *) 0)) {
819 dev_tint(dev);
820 return 0;
821 }
822
823 /* Block a timer-based transmit from overlapping. */
824
825 if (set_bit(0, (void*)&dev->tbusy) != 0)
826 printk("%s: Transmitter access conflict.\n", dev->name);
827 else {
828 short length = ETH_ZLEN60 < skb->len ? skb->len : ETH_ZLEN60;
829 unsigned char *buf = skb->data;
830 hardware_send_packet(dev, buf, length);
831 dev->trans_start = jiffies;
832 }
833
834 dev_kfree_skb (skb, FREE_WRITE0);
835
836 /* You might need to clean up and record Tx statistics here. */
837 /* lp->stats.tx_aborted_errors++; */
838
839 if (net_debug > 5)
840 printk("eepro: exiting eepro_send_packet routine.\n");
841
842 return 0;
843}
844
845/* The typical workload of the driver:
846 Handle the network interface interrupts. */
847
848static void
849eepro_interrupt(int irq, void *dev_id, struct pt_regs * regs)
850{
851 struct devicelinux_device *dev = (struct devicelinux_device *)(irq2dev_map[irq]);
852 int ioaddr, status, boguscount = 20;
853
854 if (net_debug > 5)
855 printk("eepro: entering eepro_interrupt routine.\n");
856
857 if (dev == NULL((void *) 0)) {
858 printk ("eepro_interrupt(): irq %d for unknown device.\n", irq);
859 return;
860 }
861
862 dev->interrupt = 1;
863
864 ioaddr = dev->base_addr;
865
866 do {
867 status = inb(ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01));
868
869 if (status & RX_INT0x02) {
870 if (net_debug > 4)
871 printk("eepro: packet received interrupt.\n");
872 /* Acknowledge the RX_INT */
873 outb(RX_INT, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x02),(ioaddr + 0x01)) : __outb((0x02)
,(ioaddr + 0x01)));
874 /* Get the received packets */
875 eepro_rx(dev);
876 }
877 else if (status & TX_INT0x04) {
878 if (net_debug > 4)
879 printk("eepro: packet transmit interrupt.\n");
880 /* Acknowledge the TX_INT */
881 outb(TX_INT, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x04),(ioaddr + 0x01)) : __outb((0x04)
,(ioaddr + 0x01)));
882 /* Process the status of transmitted packets */
883 eepro_transmit_interrupt(dev);
884 }
885
886 } while ((boguscount-- > 0) && (status & 0x06));
887
888 dev->interrupt = 0;
889
890 if (net_debug > 5)
891 printk("eepro: exiting eepro_interrupt routine.\n");
892
893 return;
894}
895
896static int
897eepro_close(struct devicelinux_device *dev)
898{
899 struct eepro_local *lp = (struct eepro_local *)dev->priv;
900 int ioaddr = dev->base_addr;
901 int rcv_ram = dev->mem_end;
902 short temp_reg;
903
904 dev->tbusy = 1;
905 dev->start = 0;
906
907 outb(BANK1_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x40),(ioaddr)) : __outb((0x40),(ioaddr))); /* Switch back to Bank 1 */
908
909 /* Disable the physical interrupt line. */
910 temp_reg = inb(ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01));
911 outb(temp_reg & 0x7f, ioaddr + REG1)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((temp_reg & 0x7f),(ioaddr + 0x01)) :
__outb((temp_reg & 0x7f),(ioaddr + 0x01)));
912 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Switch back to Bank 0 */
913
914 /* Flush the Tx and disable Rx. */
915 outb(STOP_RCV_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x0b),(ioaddr)) : __outb((0x0b),(ioaddr)));
916
917 lp->tx_start = lp->tx_end = rcv_ram ;
918 lp->tx_last = 0;
919
920 /* Mask all the interrupts. */
921 outb(ALL_MASK, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f),(ioaddr + 0x03)) : __outb((0x0f)
,(ioaddr + 0x03)));
922
923 /* clear all interrupts */
924 outb(ALL_MASK, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x0f),(ioaddr + 0x01)) : __outb((0x0f)
,(ioaddr + 0x01)));
925
926 /* Reset the 82595 */
927 outb(RESET_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x0e),(ioaddr)) : __outb((0x0e),(ioaddr)));
928
929 /* release the interrupt */
930 free_irq(dev->irq, NULL((void *) 0));
931 irq2dev_map[dev->irq] = 0;
932
933 /* Update the statistics here. What statistics? */
934 /* We are supposed to wait for 200 us after a RESET */
935 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
936 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80"); /* May not be enough? */
937 MOD_DEC_USE_COUNTdo { } while (0);
938
939 return 0;
940}
941
942/* Get the current statistics. This may be called with the card open or
943 closed. */
944static struct enet_statistics *
945eepro_get_stats(struct devicelinux_device *dev)
946{
947 struct eepro_local *lp = (struct eepro_local *)dev->priv;
948 return &lp->stats;
949}
950
951/* Set or clear the multicast filter for this adaptor.
952 */
953
954static void
955set_multicast_list(struct devicelinux_device *dev)
956{
957 struct eepro_local *lp = (struct eepro_local *)dev->priv;
958 short ioaddr = dev->base_addr;
959 unsigned short mode;
960 struct dev_mc_list *dmi=dev->mc_list;
961
962 if (dev->flags&(IFF_ALLMULTI0x200|IFF_PROMISC0x100) || dev->mc_count > 63)
963 {
964 /*
965 * We must make the kernel realise we had to move
966 * into promisc mode or we start all out war on
967 * the cable. If it was a promisc request the
968 * flag is already set. If not we assert it.
969 */
970 dev->flags|=IFF_PROMISC0x100;
971 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
972 mode = inb(ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
973 outb(mode | PRMSC_Mode, ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc((mode | 0x01),(ioaddr + 0x02)) : __outb
((mode | 0x01),(ioaddr + 0x02)));
974 mode = inb(ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
975 outb(mode, ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((mode),(ioaddr + 0x03)) : __outb((mode)
,(ioaddr + 0x03))); /* writing reg. 3 to complete the update */
976 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Return to BANK 0 now */
977 printk("%s: promiscuous mode enabled.\n", dev->name);
978 }
979
980 else if (dev->mc_count==0 )
981 {
982 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
983 mode = inb(ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
984 outb(mode & 0xd6, ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc((mode & 0xd6),(ioaddr + 0x02)) : __outb
((mode & 0xd6),(ioaddr + 0x02))); /* Turn off Multi-IA and PRMSC_Mode bits */
985 mode = inb(ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
986 outb(mode, ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((mode),(ioaddr + 0x03)) : __outb((mode)
,(ioaddr + 0x03))); /* writing reg. 3 to complete the update */
987 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Return to BANK 0 now */
988 }
989
990 else
991 {
992 unsigned short status, *eaddrs;
993 int i, boguscount = 0;
994
995 /* Disable RX and TX interrupts. Necessary to avoid
996 corruption of the HOST_ADDRESS_REG by interrupt
997 service routines. */
998 outb(ALL_MASK, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f),(ioaddr + 0x03)) : __outb((0x0f)
,(ioaddr + 0x03)));
999 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr))); /* be CAREFUL, BANK 2 now */
1000 mode = inb(ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __inbc(ioaddr + 0x02) : __inb(ioaddr + 0x02));
1001 outb(mode | Multi_IA, ioaddr + REG2)((__builtin_constant_p((ioaddr + 0x02)) && (ioaddr + 0x02
) < 256) ? __outbc((mode | 0x20),(ioaddr + 0x02)) : __outb
((mode | 0x20),(ioaddr + 0x02)));
1002 mode = inb(ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
1003 outb(mode, ioaddr + REG3)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((mode),(ioaddr + 0x03)) : __outb((mode)
,(ioaddr + 0x03))); /* writing reg. 3 to complete the update */
1004 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr))); /* Return to BANK 0 now */
1005 outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_end),(ioaddr + 0x0c)) : __outw
((lp->tx_end),(ioaddr + 0x0c)));
1006 outw(MC_SETUP, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((0x03),(ioaddr + 0x0e)) : __outw((0x03)
,(ioaddr + 0x0e)));
1007 outw(0, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((0),(ioaddr + 0x0e)) : __outw((0),(ioaddr
+ 0x0e)));
1008 outw(0, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((0),(ioaddr + 0x0e)) : __outw((0),(ioaddr
+ 0x0e)));
1009 outw(6*(dev->mc_count + 1), ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((6*(dev->mc_count + 1)),(ioaddr + 0x0e
)) : __outw((6*(dev->mc_count + 1)),(ioaddr + 0x0e)));
1010
1011 for (i = 0; i < dev->mc_count; i++)
1012 {
1013 eaddrs=(unsigned short *)dmi->dmi_addr;
1014 dmi=dmi->next;
1015 outw(*eaddrs++, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((*eaddrs++),(ioaddr + 0x0e)) : __outw((
*eaddrs++),(ioaddr + 0x0e)));
1016 outw(*eaddrs++, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((*eaddrs++),(ioaddr + 0x0e)) : __outw((
*eaddrs++),(ioaddr + 0x0e)));
1017 outw(*eaddrs++, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((*eaddrs++),(ioaddr + 0x0e)) : __outw((
*eaddrs++),(ioaddr + 0x0e)));
1018 }
1019
1020 eaddrs = (unsigned short *) dev->dev_addr;
1021 outw(eaddrs[0], ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((eaddrs[0]),(ioaddr + 0x0e)) : __outw((
eaddrs[0]),(ioaddr + 0x0e)));
1022 outw(eaddrs[1], ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((eaddrs[1]),(ioaddr + 0x0e)) : __outw((
eaddrs[1]),(ioaddr + 0x0e)));
1023 outw(eaddrs[2], ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((eaddrs[2]),(ioaddr + 0x0e)) : __outw((
eaddrs[2]),(ioaddr + 0x0e)));
1024 outw(lp->tx_end, ioaddr + XMT_BAR)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __outwc((lp->tx_end),(ioaddr + 0x0a)) : __outw
((lp->tx_end),(ioaddr + 0x0a)));
1025 outb(MC_SETUP, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x03),(ioaddr)) : __outb((0x03),(ioaddr)));
1026
1027 /* Update the transmit queue */
1028 i = lp->tx_end + XMT_HEADER8 + 6*(dev->mc_count + 1);
1029
1030 if (lp->tx_start != lp->tx_end)
1031 {
1032 /* update the next address and the chain bit in the
1033 last packet */
1034 outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_last + 0x04),(ioaddr + 0x0c)
) : __outw((lp->tx_last + 0x04),(ioaddr + 0x0c)));
1035 outw(i, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((i),(ioaddr + 0x0e)) : __outw((i),(ioaddr
+ 0x0e)));
1036 outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_last + 0x06),(ioaddr + 0x0c)
) : __outw((lp->tx_last + 0x06),(ioaddr + 0x0c)));
1037 status = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1038 outw(status | CHAIN_BIT, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((status | 0x8000),(ioaddr + 0x0e)) : __outw
((status | 0x8000),(ioaddr + 0x0e)));
1039 lp->tx_end = i ;
1040 }
1041 else {
1042 lp->tx_start = lp->tx_end = i ;
1043 }
1044
1045 /* Acknowledge that the MC setup is done */
1046 do { /* We should be doing this in the eepro_interrupt()! */
1047 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
1048 SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80");
1049
1050 if (inb(ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __inbc(ioaddr + 0x01) : __inb(ioaddr + 0x01)) & 0x08)
1051 {
1052 i = inb(ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __inbc(ioaddr) : __inb(ioaddr));
1053 outb(0x08, ioaddr + STATUS_REG)((__builtin_constant_p((ioaddr + 0x01)) && (ioaddr + 0x01
) < 256) ? __outbc((0x08),(ioaddr + 0x01)) : __outb((0x08)
,(ioaddr + 0x01)));
1054
1055 if (i & 0x20) { /* command ABORTed */
1056 printk("%s: multicast setup failed.\n",
1057 dev->name);
1058 break;
1059 } else if ((i & 0x0f) == 0x03) { /* MC-Done */
1060 printk("%s: set Rx mode to %d addresses.\n",
1061 dev->name, dev->mc_count);
1062 break;
1063 }
1064 }
1065 } while (++boguscount < 100);
1066
1067 /* Re-enable RX and TX interrupts */
1068 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03
)) : __outb((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03)));
1069
1070 }
1071 outb(RCV_ENABLE_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x08),(ioaddr)) : __outb((0x08),(ioaddr)));
1072}
1073
1074/* The horrible routine to read a word from the serial EEPROM. */
1075/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
1076/* The delay between EEPROM clock transitions. */
1077
1078#define eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }} { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO__asm__ __volatile__("outb %al,$0x80"); }}
1079#define EE_READ_CMD(6 << 6) (6 << 6)
1080
1081int
1082read_eeprom(int ioaddr, int location)
1083{
1084 int i;
1085 unsigned short retval = 0;
1086 short ee_addr = ioaddr + EEPROM_REG0x0a;
1087 int read_cmd = location | EE_READ_CMD(6 << 6);
1088 short ctrl_val = EECS0x02 ;
1089
1090 outb(BANK2_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x80),(ioaddr)) : __outb((0x80),(ioaddr)));
1091 outb(ctrl_val, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val),(ee_addr)) : __outb((ctrl_val),(ee_addr
)));
1092
1093 /* Shift the read command bits out. */
1094 for (i = 8; i >= 0; i--) {
1095 short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI0x04
1096 : ctrl_val;
1097 outb(outval, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((outval),(ee_addr)) : __outb((outval),(ee_addr)));
1098 outb(outval | EESK, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((outval | 0x01),(ee_addr)) : __outb((outval | 0x01
),(ee_addr))); /* EEPROM clock tick. */
1099 eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1100 outb(outval, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((outval),(ee_addr)) : __outb((outval),(ee_addr))); /* Finish EEPROM a clock tick. */
1101 eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1102 }
1103 outb(ctrl_val, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val),(ee_addr)) : __outb((ctrl_val),(ee_addr
)));
1104
1105 for (i = 16; i > 0; i--) {
1106 outb(ctrl_val | EESK, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val | 0x01),(ee_addr)) : __outb((ctrl_val |
0x01),(ee_addr))); eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1107 retval = (retval << 1) | ((inb(ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __inbc(ee_addr) : __inb(ee_addr)) & EEDO0x08) ? 1 : 0);
1108 outb(ctrl_val, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val),(ee_addr)) : __outb((ctrl_val),(ee_addr
))); eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1109 }
1110 /* Terminate the EEPROM access. */
1111 ctrl_val &= ~EECS0x02;
1112 outb(ctrl_val | EESK, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val | 0x01),(ee_addr)) : __outb((ctrl_val |
0x01),(ee_addr)));
1113 eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1114 outb(ctrl_val, ee_addr)((__builtin_constant_p((ee_addr)) && (ee_addr) < 256
) ? __outbc((ctrl_val),(ee_addr)) : __outb((ctrl_val),(ee_addr
)));
1115 eeprom_delay(){ int _i = 40; while (--_i > 0) { __asm__ __volatile__("outb %al,$0x80"
); }};
1116 outb(BANK0_SELECT, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x00),(ioaddr)) : __outb((0x00),(ioaddr)));
1117 return retval;
1118}
1119
1120static void
1121hardware_send_packet(struct devicelinux_device *dev, void *buf, short length)
1122{
1123 struct eepro_local *lp = (struct eepro_local *)dev->priv;
1124 short ioaddr = dev->base_addr;
1125 int rcv_ram = dev->mem_end;
1126 unsigned status, tx_available, last, end, boguscount = 100;
1127
1128 if (net_debug > 5)
1129 printk("eepro: entering hardware_send_packet routine.\n");
1130
1131 while (boguscount-- > 0) {
1132
1133 /* Disable RX and TX interrupts. Necessary to avoid
1134 corruption of the HOST_ADDRESS_REG by interrupt
1135 service routines. */
1136 outb(ALL_MASK, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f),(ioaddr + 0x03)) : __outb((0x0f)
,(ioaddr + 0x03)));
1137
1138 if (dev->interrupt == 1) {
1139 /* Enable RX and TX interrupts */
1140 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03
)) : __outb((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03)));
1141 continue;
1142 }
1143
1144 /* determine how much of the transmit buffer space is available */
1145 if (lp->tx_end > lp->tx_start)
1146 tx_available = XMT_RAM(0x8000 - (rcv_ram)) - (lp->tx_end - lp->tx_start);
1147 else if (lp->tx_end < lp->tx_start)
1148 tx_available = lp->tx_start - lp->tx_end;
1149 else tx_available = XMT_RAM(0x8000 - (rcv_ram));
1150
1151 if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER8)
1152 >= tx_available) /* No space available ??? */
1153 {
1154 eepro_transmit_interrupt(dev); /* Clean up the transmiting queue */
1155 /* Enable RX and TX interrupts */
1156 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03
)) : __outb((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03)));
1157 continue;
1158 }
1159
1160 last = lp->tx_end;
1161 end = last + (((length + 3) >> 1) << 1) + XMT_HEADER8;
1162 if (end >= RAM_SIZE0x8000) { /* the transmit buffer is wrapped around */
1163
1164 if ((RAM_SIZE0x8000 - last) <= XMT_HEADER8) {
1165 /* Arrrr!!!, must keep the xmt header together,
1166 several days were lost to chase this one down. */
1167 last = rcv_ram;
1168 end = last + (((length + 3) >> 1) << 1) + XMT_HEADER8;
1169 }
1170
1171 else end = rcv_ram + (end - RAM_SIZE0x8000);
1172 }
1173
1174 outw(last, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((last),(ioaddr + 0x0c)) : __outw((last)
,(ioaddr + 0x0c)));
1175 outw(XMT_CMD, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((0x04),(ioaddr + 0x0e)) : __outw((0x04)
,(ioaddr + 0x0e)));
1176 outw(0, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((0),(ioaddr + 0x0e)) : __outw((0),(ioaddr
+ 0x0e)));
1177 outw(end, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((end),(ioaddr + 0x0e)) : __outw((end),(
ioaddr + 0x0e)));
1178 outw(length, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((length),(ioaddr + 0x0e)) : __outw((length
),(ioaddr + 0x0e)));
1179
1180 if (lp->version == LAN5950)
1181 outsw(ioaddr + IO_PORT0x0e, buf, (length + 3) >> 1);
1182
1183 else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
1184 unsigned short temp = inb(ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
1185 outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((temp | 0x10),(ioaddr + 0x03)) : __outb
((temp | 0x10),(ioaddr + 0x03)));
1186 outsl(ioaddr + IO_PORT_32_BIT0x0c, buf, (length + 3) >> 2);
1187 outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((temp & ~(0x10)),(ioaddr + 0x03)) :
__outb((temp & ~(0x10)),(ioaddr + 0x03)));
1188 }
1189
1190 /* A dummy read to flush the DRAM write pipeline */
1191 status = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1192
1193 if (lp->tx_start == lp->tx_end) {
1194 outw(last, ioaddr + XMT_BAR)((__builtin_constant_p((ioaddr + 0x0a)) && (ioaddr + 0x0a
) < 256) ? __outwc((last),(ioaddr + 0x0a)) : __outw((last)
,(ioaddr + 0x0a)));
1195 outb(XMT_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x04),(ioaddr)) : __outb((0x04),(ioaddr)));
1196 lp->tx_start = last; /* I don't like to change tx_start here */
1197 }
1198 else {
1199 /* update the next address and the chain bit in the
1200 last packet */
1201
1202 if (lp->tx_end != last) {
1203 outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_last + 0x04),(ioaddr + 0x0c)
) : __outw((lp->tx_last + 0x04),(ioaddr + 0x0c)));
1204 outw(last, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((last),(ioaddr + 0x0e)) : __outw((last)
,(ioaddr + 0x0e)));
1205 }
1206
1207 outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_last + 0x06),(ioaddr + 0x0c)
) : __outw((lp->tx_last + 0x06),(ioaddr + 0x0c)));
1208 status = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1209 outw(status | CHAIN_BIT, ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __outwc((status | 0x8000),(ioaddr + 0x0e)) : __outw
((status | 0x8000),(ioaddr + 0x0e)));
1210
1211 /* Continue the transmit command */
1212 outb(RESUME_XMT_CMD, ioaddr)((__builtin_constant_p((ioaddr)) && (ioaddr) < 256
) ? __outbc((0x1c),(ioaddr)) : __outb((0x1c),(ioaddr)));
1213 }
1214 lp->tx_last = last;
1215 lp->tx_end = end;
1216
1217 /* Enable RX and TX interrupts */
1218 outb(ALL_MASK & ~(RX_MASK | TX_MASK), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03
)) : __outb((0x0f & ~(0x02 | 0x04)),(ioaddr + 0x03)));
1219
1220 if (dev->tbusy) {
1221 dev->tbusy = 0;
1222 }
1223
1224 if (net_debug > 5)
1225 printk("eepro: exiting hardware_send_packet routine.\n");
1226
1227 return;
1228 }
1229 dev->tbusy = 1;
1230
1231 if (net_debug > 5)
1232 printk("eepro: exiting hardware_send_packet routine.\n");
1233}
1234
1235static void
1236eepro_rx(struct devicelinux_device *dev)
1237{
1238 struct eepro_local *lp = (struct eepro_local *)dev->priv;
1239 short ioaddr = dev->base_addr, rcv_ram = dev->mem_end;
1240 short boguscount = 20;
1241 short rcv_car = lp->rx_start;
1242 unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
1243
1244 if (net_debug > 5)
1245 printk("eepro: entering eepro_rx routine.\n");
1246
1247 /* Set the read pointer to the start of the RCV */
1248 outw(rcv_car, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((rcv_car),(ioaddr + 0x0c)) : __outw((rcv_car
),(ioaddr + 0x0c)));
1249
1250 rcv_event = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1251 while (rcv_event == RCV_DONE0x0008) {
1252
1253 rcv_status = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1254 rcv_next_frame = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1255 rcv_size = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1256
1257 if ((rcv_status & (RX_OK0x2000 | RX_ERROR0x0d81)) == RX_OK0x2000) {
1258
1259 /* Malloc up new buffer. */
1260 struct sk_buff *skb;
1261 rcv_size &= 0x3fff;
1262 skb = dev_alloc_skb(rcv_size+5);
1263
1264 if (skb == NULL((void *) 0)) {
1265 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
1266 lp->stats.rx_dropped++;
1267 break;
1268 }
1269
1270 skb->dev = dev;
1271 skb_reserve(skb,2);
1272
1273 if (lp->version == LAN5950)
1274 insw(ioaddr+IO_PORT0x0e, skb_put(skb,rcv_size), (rcv_size + 3) >> 1);
1275
1276 else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
1277 unsigned short temp = inb(ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __inbc(ioaddr + 0x03) : __inb(ioaddr + 0x03));
1278 outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((temp | 0x10),(ioaddr + 0x03)) : __outb
((temp | 0x10),(ioaddr + 0x03)));
1279 insl(ioaddr+IO_PORT_32_BIT0x0c, skb_put(skb,rcv_size), (rcv_size + 3) >> 2);
1280 outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG)((__builtin_constant_p((ioaddr + 0x03)) && (ioaddr + 0x03
) < 256) ? __outbc((temp & ~(0x10)),(ioaddr + 0x03)) :
__outb((temp & ~(0x10)),(ioaddr + 0x03)));
1281 }
1282
1283 skb->protocol = eth_type_trans(skb,dev)((unsigned short)0);
1284 netif_rx(skb);
1285 lp->stats.rx_packets++;
1286 }
1287
1288 else { /* Not sure will ever reach here,
1289 I set the 595 to discard bad received frames */
1290 lp->stats.rx_errors++;
1291
1292 if (rcv_status & 0x0100)
1293 lp->stats.rx_over_errors++;
1294
1295 else if (rcv_status & 0x0400)
1296 lp->stats.rx_frame_errors++;
1297
1298 else if (rcv_status & 0x0800)
1299 lp->stats.rx_crc_errors++;
1300
1301 printk("%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
1302 dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
1303 }
1304
1305 if (rcv_status & 0x1000)
1306 lp->stats.rx_length_errors++;
1307
1308 if (--boguscount == 0)
1309 break;
1310
1311 rcv_car = lp->rx_start + RCV_HEADER8 + rcv_size;
1312 lp->rx_start = rcv_next_frame;
1313 outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((rcv_next_frame),(ioaddr + 0x0c)) : __outw
((rcv_next_frame),(ioaddr + 0x0c)));
1314 rcv_event = inw(ioaddr + IO_PORT)((__builtin_constant_p((ioaddr + 0x0e)) && (ioaddr + 0x0e
) < 256) ? __inwc(ioaddr + 0x0e) : __inw(ioaddr + 0x0e));
1315 }
1316 if (rcv_car == 0)
1317 rcv_car = (RCV_UPPER_LIMIT(((rcv_ram) - 2) >> 8) << 8) | 0xff;
1318
1319 outw(rcv_car - 1, ioaddr + RCV_STOP)((__builtin_constant_p((ioaddr + 0x06)) && (ioaddr + 0x06
) < 256) ? __outwc((rcv_car - 1),(ioaddr + 0x06)) : __outw
((rcv_car - 1),(ioaddr + 0x06)));
1320
1321 if (net_debug > 5)
1322 printk("eepro: exiting eepro_rx routine.\n");
1323}
1324
1325static void
1326eepro_transmit_interrupt(struct devicelinux_device *dev)
1327{
1328 struct eepro_local *lp = (struct eepro_local *)dev->priv;
1329 short ioaddr = dev->base_addr;
1330 short boguscount = 20;
1331 short xmt_status;
1332
1333 while (lp->tx_start != lp->tx_end) {
1334
1335 outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG)((__builtin_constant_p((ioaddr + 0x0c)) && (ioaddr + 0x0c
) < 256) ? __outwc((lp->tx_start),(ioaddr + 0x0c)) : __outw
((lp->tx_start),(ioaddr + 0x0c)));
1336 xmt_status = inw(ioaddr+IO_PORT)((__builtin_constant_p((ioaddr+0x0e)) && (ioaddr+0x0e
) < 256) ? __inwc(ioaddr+0x0e) : __inw(ioaddr+0x0e));
1337
1338 if ((xmt_status & TX_DONE_BIT0x0080) == 0) break;
1339
1340 xmt_status = inw(ioaddr+IO_PORT)((__builtin_constant_p((ioaddr+0x0e)) && (ioaddr+0x0e
) < 256) ? __inwc(ioaddr+0x0e) : __inw(ioaddr+0x0e));
1341 lp->tx_start = inw(ioaddr+IO_PORT)((__builtin_constant_p((ioaddr+0x0e)) && (ioaddr+0x0e
) < 256) ? __inwc(ioaddr+0x0e) : __inw(ioaddr+0x0e));
1342 dev->tbusy = 0;
1343 mark_bh(NET_BH);
1344
1345 if (xmt_status & 0x2000)
1346 lp->stats.tx_packets++;
1347 else {
1348 lp->stats.tx_errors++;
1349 if (xmt_status & 0x0400)
1350 lp->stats.tx_carrier_errors++;
1351 printk("%s: XMT status = %#x\n",
1352 dev->name, xmt_status);
1353 }
1354
1355 if (xmt_status & 0x000f) {
1356 lp->stats.collisions += (xmt_status & 0x000f);
1357 }
1358
1359 if ((xmt_status & 0x0040) == 0x0) {
1360 lp->stats.tx_heartbeat_errors++;
1361 }
1362
1363 if (--boguscount == 0)
1364 break;
1365 }
1366}
1367
1368#ifdef MODULE
1369
1370static char devicename[9] = { 0, };
1371static struct devicelinux_device dev_eepro = {
1372 devicename, /* device name is inserted by linux/drivers/net/net_init.c */
1373 0, 0, 0, 0,
1374 0, 0,
1375 0, 0, 0, NULL((void *) 0), eepro_probe };
1376static int io = 0x200;
1377static int irq = 0;
1378static int mem = (RCV_RAM0x6000/1024); /* Size of the rx buffer in KB */
1379
1380int
1381init_module(void)
1382{
1383 if (io == 0)
1384 printk("eepro: You should not use auto-probing with insmod!\n");
1385
1386 dev_eepro.base_addr = io;
1387 dev_eepro.irq = irq;
1388 dev_eepro.mem_end = mem;
1389
1390 if (register_netdev(&dev_eepro) != 0)
1391 return -EIO5;
1392
1393 return 0;
1394}
1395
1396void
1397cleanup_module(void)
1398{
1399 unregister_netdev(&dev_eepro);
1400
1401 kfree_s(dev_eepro.priv,sizeof(struct eepro_local))linux_kfree(dev_eepro.priv);
1402 dev_eepro.priv=NULL((void *) 0);
1403
1404 /* If we don't do this, we can't re-insmod it later. */
1405 release_region(dev_eepro.base_addr, EEPRO_IO_EXTENT16);
1406}
1407#endif /* MODULE */