commit 260d703adc5f275e3ba7ddff6e2e0217bc613b35 Author: Mike Mason Date: Thu Jul 30 15:33:21 2009 -0700 PCI: support for PCI Express fundamental reset This is the first of three patches that implement a bit field that PCI Express device drivers can use to indicate they need a fundamental reset during error recovery. By default, the EEH framework on powerpc does what's known as a "hot reset" during recovery of a PCI Express device. We've found a case where the device needs a "fundamental reset" to recover properly. The current PCI error recovery and EEH frameworks do not support this distinction. The attached patch (courtesy of Richard Lary) adds a bit field to pci_dev that indicates whether the device requires a fundamental reset during recovery. These patches supersede the previously submitted patch that implemented a fundamental reset bit field. Signed-off-by: Mike Mason Signed-off-by: Richard Lary Signed-off-by: Jesse Barnes Index: hurd-debian/libdde-linux26/contrib/include/linux/pci.h =================================================================== --- hurd-debian.orig/libdde-linux26/contrib/include/linux/pci.h 2012-04-16 00:26:44.000000000 +0000 +++ hurd-debian/libdde-linux26/contrib/include/linux/pci.h 2012-04-16 00:34:37.000000000 +0000 @@ -256,6 +256,7 @@ unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; + unsigned int needs_freset:1; /* Dev requires fundamental reset */ unsigned int state_saved:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */