From 7996a3d79d55b7f879dfd62e202bbfe2963718d3 Mon Sep 17 00:00:00 2001
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
Date: Sat, 27 Jul 2013 22:15:01 +0000
Subject: really properly move files
---
.../contrib/arch/x86/include/asm/visws/cobalt.h | 125 +++++++++++++++++++++
.../contrib/arch/x86/include/asm/visws/lithium.h | 53 +++++++++
.../contrib/arch/x86/include/asm/visws/piix4.h | 107 ++++++++++++++++++
.../contrib/arch/x86/include/asm/visws/sgivw.h | 5 +
4 files changed, 290 insertions(+)
create mode 100644 libdde-linux26/contrib/arch/x86/include/asm/visws/cobalt.h
create mode 100644 libdde-linux26/contrib/arch/x86/include/asm/visws/lithium.h
create mode 100644 libdde-linux26/contrib/arch/x86/include/asm/visws/piix4.h
create mode 100644 libdde-linux26/contrib/arch/x86/include/asm/visws/sgivw.h
(limited to 'libdde-linux26/contrib/arch/x86/include/asm/visws')
diff --git a/libdde-linux26/contrib/arch/x86/include/asm/visws/cobalt.h b/libdde-linux26/contrib/arch/x86/include/asm/visws/cobalt.h
new file mode 100644
index 00000000..166adf61
--- /dev/null
+++ b/libdde-linux26/contrib/arch/x86/include/asm/visws/cobalt.h
@@ -0,0 +1,125 @@
+#ifndef _ASM_X86_VISWS_COBALT_H
+#define _ASM_X86_VISWS_COBALT_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */
+
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+#define CO_CPU_PHYS 0xc2000000
+#define CO_APIC_PHYS 0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
+#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define CO_CPU_REV 0x08
+#define CO_CPU_CTRL 0x10
+#define CO_CPU_STAT 0x20
+#define CO_CPU_TIMEVAL 0x30
+
+/* CO_CPU_CTRL bits */
+#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
+#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define CO_TIME_HZ 100000000 /* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define CO_APIC_HI(n) (((n) * 0x10) + 4)
+#define CO_APIC_LO(n) ((n) * 0x10)
+#define CO_APIC_ID 0x0ffc
+
+/* CO_APIC_ID bits */
+#define CO_APIC_ENABLE 0x00000100
+
+/* CO_APIC_LO bits */
+#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
+#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define CO_APIC_IDE0 4
+#define CO_APIC_IDE1 2 /* Only on 320 */
+
+#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
+#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
+
+#define CO_APIC_PIIX4_USB 7 /* this one is weird */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
+#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
+
+#define CO_APIC_VIDOUT0 16
+#define CO_APIC_VIDOUT1 17
+#define CO_APIC_VIDIN0 18
+#define CO_APIC_VIDIN1 19
+
+#define CO_APIC_LI_AUDIO 22
+
+#define CO_APIC_AS 24
+#define CO_APIC_RE 25
+
+#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
+#define CO_APIC_NMI 29
+#define CO_APIC_LAST CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
+#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
+#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
+#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
+#define CO_IRQ_IDE0 14 /* knowledge of... */
+#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
+#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+static inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+static inline unsigned long co_cpu_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}
+
+static inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}
+
+static inline unsigned long co_apic_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define VISWS_320 0
+#define VISWS_540 1
+
+extern char visws_board_rev;
+
+#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/libdde-linux26/contrib/arch/x86/include/asm/visws/lithium.h b/libdde-linux26/contrib/arch/x86/include/asm/visws/lithium.h
new file mode 100644
index 00000000..a10d89bc
--- /dev/null
+++ b/libdde-linux26/contrib/arch/x86/include/asm/visws/lithium.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_X86_VISWS_LITHIUM_H
+#define _ASM_X86_VISWS_LITHIUM_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
+#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN 0x46
+
+/* LI_PCI_INTENT bits */
+#define LI_INTA_0 0x0001
+#define LI_INTA_1 0x0002
+#define LI_INTA_2 0x0004
+#define LI_INTA_3 0x0008
+#define LI_INTA_4 0x0010
+#define LI_INTB 0x0020
+#define LI_INTC 0x0040
+#define LI_INTD 0x0080
+
+/* More special purpose macros... */
+static inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcia_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+static inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcib_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+
+#endif /* _ASM_X86_VISWS_LITHIUM_H */
+
diff --git a/libdde-linux26/contrib/arch/x86/include/asm/visws/piix4.h b/libdde-linux26/contrib/arch/x86/include/asm/visws/piix4.h
new file mode 100644
index 00000000..d0af4d33
--- /dev/null
+++ b/libdde-linux26/contrib/arch/x86/include/asm/visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef _ASM_X86_VISWS_PIIX4_H
+#define _ASM_X86_VISWS_PIIX4_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define PIIX_PM_START 0x0F80
+
+#define SIO_GPIO_START 0x0FC0
+
+#define SIO_PM_START 0x0FC8
+
+#define PMBASE PIIX_PM_START
+#define GPIREG0 (PMBASE+0x30)
+#define GPIREG(x) (GPIREG0+((x)/8))
+#define GPIBIT(x) (1 << ((x)%8))
+
+#define PIIX_GPI_BD_ID1 18
+#define PIIX_GPI_BD_ID2 19
+#define PIIX_GPI_BD_ID3 20
+#define PIIX_GPI_BD_ID4 21
+#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
+#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
+ GPIBIT(PIIX_GPI_BD_ID2) | \
+ GPIBIT(PIIX_GPI_BD_ID3) | \
+ GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
+
+#define SIO_INDEX 0x2e
+#define SIO_DATA 0x2f
+
+#define SIO_DEV_SEL 0x7
+#define SIO_DEV_ENB 0x30
+#define SIO_DEV_MSB 0x60
+#define SIO_DEV_LSB 0x61
+
+#define SIO_GP_DEV 0x7
+
+#define SIO_GP_BASE SIO_GPIO_START
+#define SIO_GP_MSB (SIO_GP_BASE>>8)
+#define SIO_GP_LSB (SIO_GP_BASE&0xff)
+
+#define SIO_GP_DATA1 (SIO_GP_BASE+0)
+
+#define SIO_PM_DEV 0x8
+
+#define SIO_PM_BASE SIO_PM_START
+#define SIO_PM_MSB (SIO_PM_BASE>>8)
+#define SIO_PM_LSB (SIO_PM_BASE&0xff)
+#define SIO_PM_INDEX (SIO_PM_BASE+0)
+#define SIO_PM_DATA (SIO_PM_BASE+1)
+
+#define SIO_PM_FER2 0x1
+
+#define SIO_PM_GP_EN 0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV 0xff
+#define SPECIAL_REG 0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state. PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP 0x00120002
+
+#define PIIX4_RESET_PORT 0xcf9
+#define PIIX4_RESET_VAL 0x6
+
+#define PMSTS_PORT 0xf80 // 2 bytes PM Status
+#define PMEN_PORT 0xf82 // 2 bytes PM Enable
+#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
+
+#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM (1<<15) // Resume Status
+#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
+#define PM_STS_RTC (1<<10) // RTC status
+#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
+#define PM_STS_GBL (1<<5) // Global Status
+#define PM_STS_BM (1<<4) // Bus Master Status
+#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0 (0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
+
+#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/libdde-linux26/contrib/arch/x86/include/asm/visws/sgivw.h b/libdde-linux26/contrib/arch/x86/include/asm/visws/sgivw.h
new file mode 100644
index 00000000..5fbf63e1
--- /dev/null
+++ b/libdde-linux26/contrib/arch/x86/include/asm/visws/sgivw.h
@@ -0,0 +1,5 @@
+/*
+ * Frame buffer position and size:
+ */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
--
cgit v1.2.3