1 files changed, 0 insertions, 423 deletions
diff --git a/windhoek/ide/ide-lib.c b/windhoek/ide/ide-lib.c
deleted file mode 100644
index 09526a0d..00000000
--- a/windhoek/ide/ide-lib.c
+++ /dev/null
@@ -1,423 +0,0 @@
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/ide.h>
-#include <linux/bitops.h>
-
-static const char *udma_str[] =
-	 { "UDMA/16", "UDMA/25",  "UDMA/33",  "UDMA/44",
-	   "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
-static const char *mwdma_str[] =
-	{ "MWDMA0", "MWDMA1", "MWDMA2" };
-static const char *swdma_str[] =
-	{ "SWDMA0", "SWDMA1", "SWDMA2" };
-static const char *pio_str[] =
-	{ "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
-
-/**
- *	ide_xfer_verbose	-	return IDE mode names
- *	@mode: transfer mode
- *
- *	Returns a constant string giving the name of the mode
- *	requested.
- */
-
-const char *ide_xfer_verbose(u8 mode)
-{
-	const char *s;
-	u8 i = mode & 0xf;
-
-	if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
-		s = udma_str[i];
-	else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
-		s = mwdma_str[i];
-	else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
-		s = swdma_str[i];
-	else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
-		s = pio_str[i & 0x7];
-	else if (mode == XFER_PIO_SLOW)
-		s = "PIO SLOW";
-	else
-		s = "XFER ERROR";
-
-	return s;
-}
-EXPORT_SYMBOL(ide_xfer_verbose);
-
-/**
- *	ide_rate_filter		-	filter transfer mode
- *	@drive: IDE device
- *	@speed: desired speed
- *
- *	Given the available transfer modes this function returns
- *	the best available speed at or below the speed requested.
- *
- *	TODO: check device PIO capabilities
- */
-
-static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 mode = ide_find_dma_mode(drive, speed);
-
-	if (mode == 0) {
-		if (hwif->pio_mask)
-			mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
-		else
-			mode = XFER_PIO_4;
-	}
-
-/*	printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
-
-	return min(speed, mode);
-}
-
-/**
- *	ide_get_best_pio_mode	-	get PIO mode from drive
- *	@drive: drive to consider
- *	@mode_wanted: preferred mode
- *	@max_mode: highest allowed mode
- *
- *	This routine returns the recommended PIO settings for a given drive,
- *	based on the drive->id information and the ide_pio_blacklist[].
- *
- *	Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
- *	This is used by most chipset support modules when "auto-tuning".
- */
-
-u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
-{
-	u16 *id = drive->id;
-	int pio_mode = -1, overridden = 0;
-
-	if (mode_wanted != 255)
-		return min_t(u8, mode_wanted, max_mode);
-
-	if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0)
-		pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]);
-
-	if (pio_mode != -1) {
-		printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
-	} else {
-		pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
-		if (pio_mode > 2) {	/* 2 is maximum allowed tPIO value */
-			pio_mode = 2;
-			overridden = 1;
-		}
-
-		if (id[ATA_ID_FIELD_VALID] & 2) {	      /* ATA2? */
-			if (ata_id_has_iordy(id)) {
-				if (id[ATA_ID_PIO_MODES] & 7) {
-					overridden = 0;
-					if (id[ATA_ID_PIO_MODES] & 4)
-						pio_mode = 5;
-					else if (id[ATA_ID_PIO_MODES] & 2)
-						pio_mode = 4;
-					else
-						pio_mode = 3;
-				}
-			}
-		}
-
-		if (overridden)
-			printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
-					 drive->name);
-	}
-
-	if (pio_mode > max_mode)
-		pio_mode = max_mode;
-
-	return pio_mode;
-}
-EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
-
-/* req_pio == "255" for auto-tune */
-void ide_set_pio(ide_drive_t *drive, u8 req_pio)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-	u8 host_pio, pio;
-
-	if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
-	    (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
-		return;
-
-	BUG_ON(hwif->pio_mask == 0x00);
-
-	host_pio = fls(hwif->pio_mask) - 1;
-
-	pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
-
-	/*
-	 * TODO:
-	 * - report device max PIO mode
-	 * - check req_pio != 255 against device max PIO mode
-	 */
-	printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
-			  drive->name, host_pio, req_pio,
-			  req_pio == 255 ? "(auto-tune)" : "", pio);
-
-	(void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
-}
-EXPORT_SYMBOL_GPL(ide_set_pio);
-
-/**
- *	ide_toggle_bounce	-	handle bounce buffering
- *	@drive: drive to update
- *	@on: on/off boolean
- *
- *	Enable or disable bounce buffering for the device. Drives move
- *	between PIO and DMA and that changes the rules we need.
- */
-
-void ide_toggle_bounce(ide_drive_t *drive, int on)
-{
-	u64 addr = BLK_BOUNCE_HIGH;	/* dma64_addr_t */
-
-	if (!PCI_DMA_BUS_IS_PHYS) {
-		addr = BLK_BOUNCE_ANY;
-	} else if (on && drive->media == ide_disk) {
-		struct device *dev = drive->hwif->dev;
-
-		if (dev && dev->dma_mask)
-			addr = *dev->dma_mask;
-	}
-
-	if (drive->queue)
-		blk_queue_bounce_limit(drive->queue, addr);
-}
-
-int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-
-	if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
-		return 0;
-
-	if (port_ops == NULL || port_ops->set_pio_mode == NULL)
-		return -1;
-
-	/*
-	 * TODO: temporary hack for some legacy host drivers that didn't
-	 * set transfer mode on the device in ->set_pio_mode method...
-	 */
-	if (port_ops->set_dma_mode == NULL) {
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
-		return 0;
-	}
-
-	if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
-		if (ide_config_drive_speed(drive, mode))
-			return -1;
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
-		return 0;
-	} else {
-		port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
-		return ide_config_drive_speed(drive, mode);
-	}
-}
-
-int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-
-	if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
-		return 0;
-
-	if (port_ops == NULL || port_ops->set_dma_mode == NULL)
-		return -1;
-
-	if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
-		if (ide_config_drive_speed(drive, mode))
-			return -1;
-		port_ops->set_dma_mode(drive, mode);
-		return 0;
-	} else {
-		port_ops->set_dma_mode(drive, mode);
-		return ide_config_drive_speed(drive, mode);
-	}
-}
-EXPORT_SYMBOL_GPL(ide_set_dma_mode);
-
-/**
- *	ide_set_xfer_rate	-	set transfer rate
- *	@drive: drive to set
- *	@rate: speed to attempt to set
- *
- *	General helper for setting the speed of an IDE device. This
- *	function knows about user enforced limits from the configuration
- *	which ->set_pio_mode/->set_dma_mode does not.
- */
-
-int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_port_ops *port_ops = hwif->port_ops;
-
-	if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
-	    (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
-		return -1;
-
-	rate = ide_rate_filter(drive, rate);
-
-	BUG_ON(rate < XFER_PIO_0);
-
-	if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
-		return ide_set_pio_mode(drive, rate);
-
-	return ide_set_dma_mode(drive, rate);
-}
-
-static void ide_dump_opcode(ide_drive_t *drive)
-{
-	struct request *rq = drive->hwif->rq;
-	ide_task_t *task = NULL;
-
-	if (!rq)
-		return;
-
-	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
-		task = rq->special;
-
-	printk(KERN_ERR "ide: failed opcode was: ");
-	if (task == NULL)
-		printk(KERN_CONT "unknown\n");
-	else
-		printk(KERN_CONT "0x%02x\n", task->tf.command);
-}
-
-u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48)
-{
-	u32 high, low;
-
-	if (lba48)
-		high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) |
-			tf->hob_lbal;
-	else
-		high = tf->device & 0xf;
-	low  = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
-
-	return ((u64)high << 24) | low;
-}
-EXPORT_SYMBOL_GPL(ide_get_lba_addr);
-
-static void ide_dump_sector(ide_drive_t *drive)
-{
-	ide_task_t task;
-	struct ide_taskfile *tf = &task.tf;
-	u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
-
-	memset(&task, 0, sizeof(task));
-	if (lba48)
-		task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA |
-				IDE_TFLAG_LBA48;
-	else
-		task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
-
-	drive->hwif->tp_ops->tf_read(drive, &task);
-
-	if (lba48 || (tf->device & ATA_LBA))
-		printk(KERN_CONT ", LBAsect=%llu",
-			(unsigned long long)ide_get_lba_addr(tf, lba48));
-	else
-		printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
-			tf->device & 0xf, tf->lbal);
-}
-
-static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
-{
-	printk(KERN_ERR "{ ");
-	if (err & ATA_ABORTED)
-		printk(KERN_CONT "DriveStatusError ");
-	if (err & ATA_ICRC)
-		printk(KERN_CONT "%s",
-			(err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
-	if (err & ATA_UNC)
-		printk(KERN_CONT "UncorrectableError ");
-	if (err & ATA_IDNF)
-		printk(KERN_CONT "SectorIdNotFound ");
-	if (err & ATA_TRK0NF)
-		printk(KERN_CONT "TrackZeroNotFound ");
-	if (err & ATA_AMNF)
-		printk(KERN_CONT "AddrMarkNotFound ");
-	printk(KERN_CONT "}");
-	if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
-	    (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
-		struct request *rq = drive->hwif->rq;
-
-		ide_dump_sector(drive);
-
-		if (rq)
-			printk(KERN_CONT ", sector=%llu",
-			       (unsigned long long)rq->sector);
-	}
-	printk(KERN_CONT "\n");
-}
-
-static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
-{
-	printk(KERN_ERR "{ ");
-	if (err & ATAPI_ILI)
-		printk(KERN_CONT "IllegalLengthIndication ");
-	if (err & ATAPI_EOM)
-		printk(KERN_CONT "EndOfMedia ");
-	if (err & ATA_ABORTED)
-		printk(KERN_CONT "AbortedCommand ");
-	if (err & ATA_MCR)
-		printk(KERN_CONT "MediaChangeRequested ");
-	if (err & ATAPI_LFS)
-		printk(KERN_CONT "LastFailedSense=0x%02x ",
-			(err & ATAPI_LFS) >> 4);
-	printk(KERN_CONT "}\n");
-}
-
-/**
- *	ide_dump_status		-	translate ATA/ATAPI error
- *	@drive: drive that status applies to
- *	@msg: text message to print
- *	@stat: status byte to decode
- *
- *	Error reporting, in human readable form (luxurious, but a memory hog).
- *	Combines the drive name, message and status byte to provide a
- *	user understandable explanation of the device error.
- */
-
-u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
-{
-	u8 err = 0;
-
-	printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
-	if (stat & ATA_BUSY)
-		printk(KERN_CONT "Busy ");
-	else {
-		if (stat & ATA_DRDY)
-			printk(KERN_CONT "DriveReady ");
-		if (stat & ATA_DF)
-			printk(KERN_CONT "DeviceFault ");
-		if (stat & ATA_DSC)
-			printk(KERN_CONT "SeekComplete ");
-		if (stat & ATA_DRQ)
-			printk(KERN_CONT "DataRequest ");
-		if (stat & ATA_CORR)
-			printk(KERN_CONT "CorrectedError ");
-		if (stat & ATA_IDX)
-			printk(KERN_CONT "Index ");
-		if (stat & ATA_ERR)
-			printk(KERN_CONT "Error ");
-	}
-	printk(KERN_CONT "}\n");
-	if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
-		err = ide_read_error(drive);
-		printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
-		if (drive->media == ide_disk)
-			ide_dump_ata_error(drive, err);
-		else
-			ide_dump_atapi_error(drive, err);
-	}
-	ide_dump_opcode(drive);
-	return err;
-}
-EXPORT_SYMBOL(ide_dump_status);