This patch is just autogenerated stuff, do not hack directly on it. Regenerate with: autoreconf -fis find -name autom4te.cache | xargs rm -rf --- config.h.in 2007-03-06 06:42:34.000000000 +0200 +++ config.h.in 2007-03-06 07:08:00.000000000 +0200 @@ -43,6 +43,9 @@ /* option floppy: Linux device driver for PC floppy */ #undef CONFIG_BLK_DEV_FD +/* Force DMA on IDE block devices */ +#undef CONFIG_BLK_DEV_FORCE_DMA + /* option ide: Linux device driver for IDE disk controllers */ #undef CONFIG_BLK_DEV_IDE @@ -319,6 +322,9 @@ /* option seeq8005: Linux device driver for Ethernet controller Seeq8005 */ #undef CONFIG_SEEQ8005 +/* option sis900: Linux device driver for Ethernet controller SiS 900 */ +#undef CONFIG_SIS900 + /* option sk_g16: Linux device driver for Ethernet controller Schneider & Koch G16 */ #undef CONFIG_SK_G16 --- config.h.in~ 1970-01-01 02:00:00.000000000 +0200 +++ config.h.in~ 2007-03-06 06:42:34.000000000 +0200 @@ -0,0 +1,508 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* AT386 */ +#undef AT386 + +/* BOOTSTRAP_SYMBOLS */ +#undef BOOTSTRAP_SYMBOLS + +/* CMU */ +#undef CMU + +/* option 3c515: Linux device driver for Ethernet controller 3Com 515 ISA Fast + EtherLink */ +#undef CONFIG_3C515 + +/* option 3c574_cs: Linux device driver for 3Com 3c574 ``RoadRunner'' PCMCIA + Ethernet */ +#undef CONFIG_3C574_CS + +/* option 3c589_cs: Linux device driver for 3Com 3c589 PCMCIA Ethernet card */ +#undef CONFIG_3C589_CS + +/* option ac3200: Linux device driver for Ethernet controller Ansel + Communications EISA 3200 */ +#undef CONFIG_AC3200 + +/* option apricot: Linux device driver for Ethernet controller Apricot XEN-II + on board ethernet */ +#undef CONFIG_APRICOT + +/* option at1700: Linux device driver for Ethernet controller AT1700 (Fujitsu + 86965) */ +#undef CONFIG_AT1700 + +/* option atp: Linux device driver for Ethernet controller AT-LAN-TEC/RealTek + pocket adaptor */ +#undef CONFIG_ATP + +/* option axnet_cs: Linux device driver for Asix AX88190-based PCMCIA Ethernet + adapters */ +#undef CONFIG_AXNET_CS + +/* option floppy: Linux device driver for PC floppy */ +#undef CONFIG_BLK_DEV_FD + +/* option ide: Linux device driver for IDE disk controllers */ +#undef CONFIG_BLK_DEV_IDE + +/* option de4x5: Linux device driver for Ethernet controller DE4x5 (de4x5, + de425, de434, de435, de450, de500) */ +#undef CONFIG_DE4X5 + +/* option de600: Linux device driver for Ethernet controller D-Link DE-600 */ +#undef CONFIG_DE600 + +/* option de620: Linux device driver for Ethernet controller D-Link DE-620 */ +#undef CONFIG_DE620 + +/* option tulip: Linux device driver for Ethernet controller DECchip Tulip + (dc21x4x) PCI (elcp, tulip) */ +#undef CONFIG_DEC_ELCP + +/* option depca: Linux device driver for Ethernet controller DEPCA (de100, + de101, de200, de201, de202, de210, de422) */ +#undef CONFIG_DEPCA + +/* option e2100: Linux device driver for Ethernet controller Cabletron E21xx + */ +#undef CONFIG_E2100 + +/* option eexpress: Linux device driver for Ethernet controller EtherExpress + 16 */ +#undef CONFIG_EEXPRESS + +/* option eepro: Linux device driver for Ethernet controller EtherExpressPro + */ +#undef CONFIG_EEXPRESS_PRO + +/* option eepro100: Linux device driver for Ethernet controller Intel + EtherExpressPro PCI 10+/100B/100+ */ +#undef CONFIG_EEXPRESS_PRO100B + +/* option 3c501: Linux device driver for Ethernet controller 3COM 501 (3c501) + / Etherlink I */ +#undef CONFIG_EL1 + +/* option 3c507: Linux device driver for Ethernet controller 3Com 507 (3c507, + el16) */ +#undef CONFIG_EL16 + +/* option 3c503: Linux device driver for Ethernet controller 3Com 503 (3c503) + / Etherlink II */ +#undef CONFIG_EL2 + +/* option 3c509: Linux device driver for Ethernet controller 3Com 509/579 + (3c509, 3c579) / Etherlink III */ +#undef CONFIG_EL3 + +/* option 3c505: Linux device driver for Ethernet controller 3Com 505 (3c505, + elplus) */ +#undef CONFIG_ELPLUS + +/* option epic100: Linux device driver for Ethernet controller SMC 83c170/175 + EPIC/100 (epic, epic100) / EtherPower II */ +#undef CONFIG_EPIC + +/* option eth16i: Linux device driver for Ethernet controller ICL EtherTeam + 16i/32 (eth16i, eth32) */ +#undef CONFIG_ETH16I + +/* option ewrk3: Linux device driver for Ethernet controller EtherWORKS 3 + (ewrk3, de203, de204, de205) */ +#undef CONFIG_EWRK3 + +/* option fmv18x: Linux device driver for Ethernet controller + FMV-181/182/183/184 */ +#undef CONFIG_FMV18X + +/* option fmvj18x_cs: Linux device driver for fmvj18x chipset based PCMCIA + Ethernet cards */ +#undef CONFIG_FMVJ18X_CS + +/* option hamachi: Linux device driver for Ethernet controller Packet Engines + "Hamachi" GNIC-2 Gigabit Ethernet */ +#undef CONFIG_HAMACHI + +/* option hp100: Linux device driver for Ethernet controller HP 10/100VG PCLAN + (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b) */ +#undef CONFIG_HP100 + +/* option hp: Linux device driver for Ethernet controller HP PCLAN (27245 and + other 27xxx series) */ +#undef CONFIG_HPLAN + +/* option hp-plus: Linux device driver for Ethernet controller HP PCLAN+ + (27247B and 27252A) */ +#undef CONFIG_HPLAN_PLUS + +/* option i82365: Linux device driver for Intel 82365 PC Card controller */ +#undef CONFIG_I82365 + +/* CONFIG_INET */ +#undef CONFIG_INET + +/* option intel-gige: Linux device driver for Ethernet controller Intel PCI + Gigabit Ethernet */ +#undef CONFIG_INTEL_GIGE + +/* option pcmcia-isa: isa bus support in the pcmcia core */ +#undef CONFIG_ISA + +/* option lance: Linux device driver for Ethernet controller AMD LANCE and + PCnet (at1500, ne2100) */ +#undef CONFIG_LANCE + +/* 386 */ +#undef CONFIG_M386 + +/* 486 */ +#undef CONFIG_M486 + +/* 586 */ +#undef CONFIG_M586 + +/* 686 */ +#undef CONFIG_M686 + +/* option myson803: Linux device driver for Ethernet controller Myson MTD803 + Ethernet adapter series */ +#undef CONFIG_MYSON803 + +/* option natsemi: Linux device driver for Ethernet controller National + Semiconductor DP8381x series PCI Ethernet */ +#undef CONFIG_NATSEMI + +/* option ne: Linux device driver for Ethernet controller NE2000/NE1000 ISA + (ne, ne1000, ne2000) */ +#undef CONFIG_NE2000 + +/* option ne2k-pci: Linux device driver for Ethernet controller PCI NE2000 */ +#undef CONFIG_NE2K_PCI + +/* option ni52: Linux device driver for Ethernet controller NI5210 */ +#undef CONFIG_NI52 + +/* option ni65: Linux device driver for Ethernet controller NI6510 */ +#undef CONFIG_NI65 + +/* option nmclan_cs: Linux device driver for New Media Ethernet LAN PCMCIA + cards */ +#undef CONFIG_NMCLAN_CS + +/* option ns820: Linux device driver for Ethernet controller National + Semiconductor DP8382x series PCI Ethernet */ +#undef CONFIG_NS820 + +/* option orinoco_cs: Linux device driver for Hermes or Prism 2 PCMCIA + Wireless adapters (Orinoco) */ +#undef CONFIG_ORINOCO_CS + +/* CONFIG_PCMCIA */ +#undef CONFIG_PCMCIA + +/* option pcnet32: Linux device driver for Ethernet controller AMD PCI PCnet32 + (PCI bus NE2100 cards) */ +#undef CONFIG_PCNET32 + +/* option pcnet_cs: Linux device driver for NS8390-based PCMCIA cards */ +#undef CONFIG_PCNET_CS + +/* option rtl8139: Linux device driver for Ethernet controller RealTek + 8129/8139 (rtl8129, rtl8139) (not 8019/8029!) */ +#undef CONFIG_RTL8139 + +/* CONFIG_SCSI */ +#undef CONFIG_SCSI + +/* option wd7000: Linux device driver for SCSI controller WD 7000 */ +#undef CONFIG_SCSI_7000FASST + +/* option advansys: Linux device driver for SCSI controller AdvanSys */ +#undef CONFIG_SCSI_ADVANSYS + +/* option aha152x: Linux device driver for SCSI controller Adaptec + AHA-152x/2825 (aha152x, aha2825) */ +#undef CONFIG_SCSI_AHA152X + +/* option aha1542: Linux device driver for SCSI controller Adaptec AHA-1542 */ +#undef CONFIG_SCSI_AHA1542 + +/* option aha1740: Linux device driver for SCSI controller Adaptec AHA-1740 */ +#undef CONFIG_SCSI_AHA1740 + +/* option aic7xxx: Linux device driver for SCSI controller Adaptec AIC7xxx */ +#undef CONFIG_SCSI_AIC7XXX + +/* option AM53C974: Linux device driver for SCSI controller AM53/79C974 + (am53c974, am79c974) */ +#undef CONFIG_SCSI_AM53C974 + +/* option BusLogic: Linux device driver for SCSI controller BusLogic */ +#undef CONFIG_SCSI_BUSLOGIC + +/* option tmscsim: Linux device driver for SCSI controller Tekram DC-390(T) + (dc390, dc390t) */ +#undef CONFIG_SCSI_DC390T + +/* option dtc: Linux device driver for SCSI controller DTC3180/3280 (dtc3180, + dtc3280) */ +#undef CONFIG_SCSI_DTC3280 + +/* option eata: Linux device driver for SCSI controller EATA ISA/EISA/PCI (DPT + and generic EATA/DMA-compliant boards) */ +#undef CONFIG_SCSI_EATA + +/* option eata_dma: Linux device driver for SCSI controller EATA-DMA (DPT, + NEC, AT&T, SNI, AST, Olivetti, Alphatronix) */ +#undef CONFIG_SCSI_EATA_DMA + +/* option eata_pio: Linux device driver for SCSI controller EATA-PIO (old DPT + PM2001, PM2012A) */ +#undef CONFIG_SCSI_EATA_PIO + +/* option fdomain: Linux device driver for SCSI controller Future Domain 16xx + */ +#undef CONFIG_SCSI_FUTURE_DOMAIN + +/* option gdth: Linux device driver for GDT SCSI Disk Array Controller */ +#undef CONFIG_SCSI_GDTH + +/* option g_NCR5380: Linux device driver for SCSI controller Generic + NCR5380/53c400 (ncr5380, ncr53c400) */ +#undef CONFIG_SCSI_GENERIC_NCR5380 + +/* option in2000: Linux device driver for SCSI controller Always IN 2000 */ +#undef CONFIG_SCSI_IN2000 + +/* option NCR53c406a: Linux device driver for SCSI controller NCR53c406a chip + */ +#undef CONFIG_SCSI_NCR53C406A + +/* option 53c78xx: Linux device driver for SCSI controller NCR 53C7,8xx */ +#undef CONFIG_SCSI_NCR53C7xx + +/* option ncr53c8xx: Linux device driver for SCSI controller NCR53C8XX + (ncr53c8xx, dc390f, dc390u, dc390w) */ +#undef CONFIG_SCSI_NCR53C8XX + +/* scsi omit flashpoint */ +#undef CONFIG_SCSI_OMIT_FLASHPOINT + +/* option pas16: Linux device driver for SCSI controller PAS16 */ +#undef CONFIG_SCSI_PASS16 + +/* option ppa: Linux device driver for IOMEGA Parallel Port ZIP drive */ +#undef CONFIG_SCSI_PPA + +/* option qlogicfas: Linux device driver for SCSI controller Qlogic FAS */ +#undef CONFIG_SCSI_QLOGIC_FAS + +/* option qlogicisp: Linux device driver for SCSI controller Qlogic ISP */ +#undef CONFIG_SCSI_QLOGIC_ISP + +/* option seagate: Linux device driver for SCSI controller Seagate ST02, + Future Domain TMC-8xx */ +#undef CONFIG_SCSI_SEAGATE + +/* option t128: Linux device driver for SCSI controller Trantor + T128/T128F/T228 (t128, t128f, t228) */ +#undef CONFIG_SCSI_T128 + +/* option u14-34f: Linux device driver for SCSI controller UltraStor 14F/34F + */ +#undef CONFIG_SCSI_U14_34F + +/* option ultrastor: Linux device driver for SCSI controller UltraStor */ +#undef CONFIG_SCSI_ULTRASTOR + +/* option seeq8005: Linux device driver for Ethernet controller Seeq8005 */ +#undef CONFIG_SEEQ8005 + +/* option sk_g16: Linux device driver for Ethernet controller Schneider & Koch + G16 */ +#undef CONFIG_SK_G16 + +/* option smc91c92_cs: Linux device driver for SMC91c92-based PCMCIA cards */ +#undef CONFIG_SMC91C92_CS + +/* option starfire: Linux device driver for Ethernet controller Adaptec + Starfire network adapter */ +#undef CONFIG_STARFIRE + +/* option sundance: Linux device driver for Ethernet controller Sundance ST201 + "Alta" PCI Ethernet */ +#undef CONFIG_SUNDANCE + +/* option tlan: Linux device driver for Ethernet controller TI ThunderLAN */ +#undef CONFIG_TLAN + +/* option smc-ultra: Linux device driver for Ethernet controller SMC Ultra */ +#undef CONFIG_ULTRA + +/* option smc-ultra32: Linux device driver for Ethernet controller SMC Ultra32 + */ +#undef CONFIG_ULTRA32 + +/* option via-rhine: Linux device driver for Ethernet controller VIA Rhine */ +#undef CONFIG_VIA_RHINE + +/* option 3c59x: Linux device driver for Ethernet controller 3Com 59x/90x + (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang" + */ +#undef CONFIG_VORTEX + +/* option wavelan: Linux device driver for Ethernet controller AT&T WaveLAN & + DEC RoamAbout DS */ +#undef CONFIG_WAVELAN + +/* option wd: Linux device driver for Ethernet controller WD80x3 */ +#undef CONFIG_WD80x3 + +/* option winbond-840: Linux device driver for Ethernet controller Winbond + W89c840 PCI Ethernet */ +#undef CONFIG_WINBOND840 + +/* CONFIG_WIRELESS */ +#undef CONFIG_WIRELESS + +/* option xirc2ps_cs: Linux device driver for Xircom CreditCard and Realport + PCMCIA ethernet */ +#undef CONFIG_XIRC2PS_CS + +/* option yellowfin: Linux device driver for Ethernet controller Packet + Engines Yellowfin Gigabit-NIC */ +#undef CONFIG_YELLOWFIN + +/* option znet: Linux device driver for Ethernet controller Zenith Z-Note + (znet, znote) */ +#undef CONFIG_ZNET + +/* CPU */ +#undef CPU + +/* FAST_TAS */ +#undef FAST_TAS + +/* HW_FOOTPRINT */ +#undef HW_FOOTPRINT + +/* KERNEL */ +#undef KERNEL + +/* Linux device drivers. */ +#undef LINUX_DEV + +/* MACH */ +#undef MACH + +/* MACH_COUNTERS */ +#undef MACH_COUNTERS + +/* MACH_DEBUG */ +#undef MACH_DEBUG + +/* MACH_FIXPRI */ +#undef MACH_FIXPRI + +/* MACH_HOST */ +#undef MACH_HOST + +/* MACH_IPC_DEBUG */ +#undef MACH_IPC_DEBUG + +/* MACH_IPC_TEST */ +#undef MACH_IPC_TEST + +/* Use the in-kernel debugger? */ +#undef MACH_KDB + +/* Standalone MACH kernel */ +#undef MACH_KERNEL + +/* enable use of kmsg device */ +#undef MACH_KMSG + +/* MACH_LDEBUG */ +#undef MACH_LDEBUG + +/* MACH_LOCK_MON */ +#undef MACH_LOCK_MON + +/* lpr device */ +#undef MACH_LPR + +/* MACH_MACHINE_ROUTINES */ +#undef MACH_MACHINE_ROUTINES + +/* MACH_MP_DEBUG */ +#undef MACH_MP_DEBUG + +/* MACH_PAGEMAP */ +#undef MACH_PAGEMAP + +/* MACH_PCSAMPLE */ +#undef MACH_PCSAMPLE + +/* MACH_TTD */ +#undef MACH_TTD + +/* MACH_VM_DEBUG */ +#undef MACH_VM_DEBUG + +/* set things up for a uniprocessor */ +#undef MULTIPROCESSOR + +/* NCOM */ +#undef NCOM + +/* set things up for a uniprocessor */ +#undef NCPUS + +/* NLPR */ +#undef NLPR + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* POWER_SAVE */ +#undef POWER_SAVE + +/* where is the com port for the remote console */ +#undef RCADDR + +/* com port for the remote console */ +#undef RCLINE + +/* SIMPLE_CLOCK */ +#undef SIMPLE_CLOCK + +/* STAT_TIME */ +#undef STAT_TIME + +/* XPR_DEBUG */ +#undef XPR_DEBUG + +/* __ELF__ */ +#undef __ELF__ + +/* __KERNEL__ */ +#undef __KERNEL__ + +/* i386 */ +#undef i386 --- configure 2007-03-06 06:42:29.000000000 +0200 +++ configure 2007-03-06 07:07:56.000000000 +0200 @@ -821,6 +821,8 @@ device_driver_rtl8139_TRUE device_driver_rtl8139_FALSE device_driver_seeq8005_TRUE device_driver_seeq8005_FALSE +device_driver_sis900_TRUE +device_driver_sis900_FALSE device_driver_sk_g16_TRUE device_driver_sk_g16_FALSE device_driver_smc_ultra_TRUE @@ -1489,6 +1491,7 @@ Optional Features: default for ix86-at --enable-ide Linux device driver for IDE disk controllers; enabled by default for ix86-at + --enable-ide-forcedma enable forced use of DMA on IDE --enable-53c78xx Linux device driver for SCSI controller NCR 53C7,8xx; enabled by default for ix86-at --enable-AM53C974 Linux device driver for SCSI controller AM53/79C974 @@ -1656,6 +1659,8 @@ Optional Features: enabled by default for ix86-at --enable-seeq8005 Linux device driver for Ethernet controller Seeq8005; enabled by default for ix86-at + --enable-sis900 Linux device driver for Ethernet controller SiS 900; + enabled by default for ix86-at --enable-sk_g16 Linux device driver for Ethernet controller Schneider & Koch G16; enabled by default for ix86-at --enable-smc-ultra Linux device driver for Ethernet controller SMC @@ -6408,6 +6413,17 @@ _ACEOF fi +# Check whether --enable-ide-forcedma was given. +if test "${enable_ide_forcedma+set}" = set; then + enableval=$enable_ide_forcedma; test x"$enableval" = xno || + +cat >>confdefs.h <<\_ACEOF +#define CONFIG_BLK_DEV_FORCE_DMA 1 +_ACEOF + +fi + + @@ -9109,6 +9125,46 @@ fi unset enableval +# Check whether --enable-sis900 was given. +if test "${enable_sis900+set}" = set; then + enableval=$enable_sis900; +fi + +#TODO. +case $host_platform:$host_cpu in + at:i?86) + enableval=${enableval-$enable_default_device_drivers};; + *) + if [ x"$enableval" = xyes ]; then + # TODO. That might not always be true. + { { echo "$as_me:$LINENO: error: cannot enable \`sis900' in this configuration." >&5 +echo "$as_me: error: cannot enable \`sis900' in this configuration." >&2;} + { (exit 1); exit 1; }; } + fi;; +esac + + +if [ x"$enableval" = xyes ]; then + device_driver_sis900_TRUE= + device_driver_sis900_FALSE='#' +else + device_driver_sis900_TRUE='#' + device_driver_sis900_FALSE= +fi + +if [ x"$enableval" = xyes ]; then + have_linux_code=yes + +cat >>confdefs.h <<\_ACEOF +#define CONFIG_SIS900 1 +_ACEOF + + device_driver_group net +fi + + + +unset enableval # Check whether --enable-sk_g16 was given. if test "${enable_sk_g16+set}" = set; then enableval=$enable_sk_g16; @@ -11076,6 +11132,13 @@ echo "$as_me: error: conditional \"devic Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi +if test -z "${device_driver_sis900_TRUE}" && test -z "${device_driver_sis900_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"device_driver_sis900\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"device_driver_sis900\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi if test -z "${device_driver_sk_g16_TRUE}" && test -z "${device_driver_sk_g16_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"device_driver_sk_g16\" was never defined. Usually this means the macro was only invoked conditionally." >&5 @@ -12181,6 +12244,8 @@ device_driver_rtl8139_TRUE!$device_drive device_driver_rtl8139_FALSE!$device_driver_rtl8139_FALSE$ac_delim device_driver_seeq8005_TRUE!$device_driver_seeq8005_TRUE$ac_delim device_driver_seeq8005_FALSE!$device_driver_seeq8005_FALSE$ac_delim +device_driver_sis900_TRUE!$device_driver_sis900_TRUE$ac_delim +device_driver_sis900_FALSE!$device_driver_sis900_FALSE$ac_delim device_driver_sk_g16_TRUE!$device_driver_sk_g16_TRUE$ac_delim device_driver_sk_g16_FALSE!$device_driver_sk_g16_FALSE$ac_delim device_driver_smc_ultra_TRUE!$device_driver_smc_ultra_TRUE$ac_delim @@ -12228,8 +12293,6 @@ device_driver_smc91c92_cs_FALSE!$device_ device_driver_xirc2ps_cs_TRUE!$device_driver_xirc2ps_cs_TRUE$ac_delim device_driver_xirc2ps_cs_FALSE!$device_driver_xirc2ps_cs_FALSE$ac_delim device_driver_orinoco_cs_TRUE!$device_driver_orinoco_cs_TRUE$ac_delim -device_driver_orinoco_cs_FALSE!$device_driver_orinoco_cs_FALSE$ac_delim -device_driver_group_net_TRUE!$device_driver_group_net_TRUE$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then @@ -12271,6 +12334,8 @@ _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF +device_driver_orinoco_cs_FALSE!$device_driver_orinoco_cs_FALSE$ac_delim +device_driver_group_net_TRUE!$device_driver_group_net_TRUE$ac_delim device_driver_group_net_FALSE!$device_driver_group_net_FALSE$ac_delim device_driver_group_pcmcia_TRUE!$device_driver_group_pcmcia_TRUE$ac_delim device_driver_group_pcmcia_FALSE!$device_driver_group_pcmcia_FALSE$ac_delim @@ -12284,7 +12349,7 @@ LIBOBJS!$LIBOBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 11; then + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 13; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 --- Makefile.in 2007-03-06 06:42:41.000000000 +0200 +++ Makefile.in 2007-03-06 07:08:08.000000000 +0200 @@ -161,28 +161,6 @@ # Tests. # -# Makefile fragment for the documentation. - -# Copyright (C) 2006, 2007 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2, or (at your option) any later -# version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# -# The GNU Mach Reference Manual. -# - @@ -221,15 +199,13 @@ DIST_COMMON = README $(am__configure_dep $(include_mach_eXec_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/Makefrag.am \ $(srcdir)/Makerules.am $(srcdir)/config.h.in \ - $(srcdir)/doc/Makefrag.am $(srcdir)/doc/stamp-vti \ - $(srcdir)/doc/version.texi $(srcdir)/i386/Makefrag.am \ - $(srcdir)/i386/linux/Makefrag.am $(srcdir)/linux/Makefrag.am \ - $(srcdir)/tests/Makefrag.am $(srcdir)/version.c.in \ - $(top_srcdir)/configure $(top_srcdir)/tests/test-mbchk.in \ - AUTHORS COPYING ChangeLog INSTALL NEWS build-aux/compile \ - build-aux/config.guess build-aux/config.sub build-aux/depcomp \ - build-aux/install-sh build-aux/mdate-sh build-aux/missing \ - build-aux/texinfo.tex + $(srcdir)/i386/Makefrag.am $(srcdir)/i386/linux/Makefrag.am \ + $(srcdir)/linux/Makefrag.am $(srcdir)/tests/Makefrag.am \ + $(srcdir)/version.c.in $(top_srcdir)/configure \ + $(top_srcdir)/tests/test-mbchk.in AUTHORS COPYING ChangeLog \ + INSTALL NEWS build-aux/compile build-aux/config.guess \ + build-aux/config.sub build-aux/depcomp build-aux/install-sh \ + build-aux/mdate-sh build-aux/missing build-aux/texinfo.tex # Do we want the icky kernel debugger? @enable_kdb_TRUE@am__append_2 = \ @@ -607,62 +583,65 @@ DIST_COMMON = README $(am__configure_dep @device_driver_seeq8005_TRUE@ linux/src/drivers/net/seeq8005.c \ @device_driver_seeq8005_TRUE@ linux/src/drivers/net/seeq8005.h -@device_driver_sk_g16_TRUE@am__append_83 = \ +@device_driver_sis900_TRUE@am__append_83 = \ +@device_driver_sis900_TRUE@ linux/src/drivers/net/sis900.c + +@device_driver_sk_g16_TRUE@am__append_84 = \ @device_driver_sk_g16_TRUE@ linux/src/drivers/net/sk_g16.c \ @device_driver_sk_g16_TRUE@ linux/src/drivers/net/sk_g16.h -@device_driver_smc_ultra_TRUE@am__append_84 = \ +@device_driver_smc_ultra_TRUE@am__append_85 = \ @device_driver_smc_ultra_TRUE@ linux/src/drivers/net/smc-ultra.c \ @device_driver_smc_ultra_TRUE@ linux/src/drivers/net/8390.c -@device_driver_smc_ultra32_TRUE@am__append_85 = \ +@device_driver_smc_ultra32_TRUE@am__append_86 = \ @device_driver_smc_ultra32_TRUE@ linux/src/drivers/net/smc-ultra32.c \ @device_driver_smc_ultra32_TRUE@ linux/src/drivers/net/8390.c -@device_driver_starfire_TRUE@am__append_86 = \ +@device_driver_starfire_TRUE@am__append_87 = \ @device_driver_starfire_TRUE@ linux/src/drivers/net/starfire.c -@device_driver_sundance_TRUE@am__append_87 = \ +@device_driver_sundance_TRUE@am__append_88 = \ @device_driver_sundance_TRUE@ linux/src/drivers/net/sundance.c -@device_driver_tlan_TRUE@am__append_88 = \ +@device_driver_tlan_TRUE@am__append_89 = \ @device_driver_tlan_TRUE@ linux/src/drivers/net/tlan.c \ @device_driver_tlan_TRUE@ linux/src/drivers/net/tlan.h -@device_driver_tulip_TRUE@am__append_89 = \ +@device_driver_tulip_TRUE@am__append_90 = \ @device_driver_tulip_TRUE@ linux/src/drivers/net/tulip.c -@device_driver_via_rhine_TRUE@am__append_90 = \ +@device_driver_via_rhine_TRUE@am__append_91 = \ @device_driver_via_rhine_TRUE@ linux/src/drivers/net/via-rhine.c -@device_driver_wavelan_TRUE@am__append_91 = \ +@device_driver_wavelan_TRUE@am__append_92 = \ @device_driver_wavelan_TRUE@ linux/src/drivers/net/i82586.h \ @device_driver_wavelan_TRUE@ linux/src/drivers/net/wavelan.c \ @device_driver_wavelan_TRUE@ linux/src/drivers/net/wavelan.h \ @device_driver_wavelan_TRUE@ linux/dev/drivers/net/wavelan.p.h -@device_driver_wd_TRUE@am__append_92 = \ +@device_driver_wd_TRUE@am__append_93 = \ @device_driver_wd_TRUE@ linux/src/drivers/net/wd.c -@device_driver_winbond_840_TRUE@am__append_93 = \ +@device_driver_winbond_840_TRUE@am__append_94 = \ @device_driver_winbond_840_TRUE@ linux/src/drivers/net/winbond-840.c \ @device_driver_winbond_840_TRUE@ linux/src/drivers/net/8390.c -@device_driver_yellowfin_TRUE@am__append_94 = \ +@device_driver_yellowfin_TRUE@am__append_95 = \ @device_driver_yellowfin_TRUE@ linux/src/drivers/net/yellowfin.c -@device_driver_znet_TRUE@am__append_95 = \ +@device_driver_znet_TRUE@am__append_96 = \ @device_driver_znet_TRUE@ linux/src/drivers/net/znet.c -@device_driver_group_pcmcia_TRUE@am__append_96 = \ +@device_driver_group_pcmcia_TRUE@am__append_97 = \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_modules.a \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_clients.a \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_wireless.a -@device_driver_group_pcmcia_TRUE@am__append_97 = \ +@device_driver_group_pcmcia_TRUE@am__append_98 = \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_modules.a \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_clients.a \ @device_driver_group_pcmcia_TRUE@ liblinux_pcmcia_cs_wireless.a -@device_driver_i82365_TRUE@am__append_98 = \ +@device_driver_i82365_TRUE@am__append_99 = \ @device_driver_i82365_TRUE@ linux/pcmcia-cs/modules/cirrus.h \ @device_driver_i82365_TRUE@ linux/pcmcia-cs/modules/ene.h \ @device_driver_i82365_TRUE@ linux/pcmcia-cs/modules/i82365.c \ @@ -675,34 +654,34 @@ DIST_COMMON = README $(am__configure_dep @device_driver_i82365_TRUE@ linux/pcmcia-cs/modules/vg468.h \ @device_driver_i82365_TRUE@ linux/pcmcia-cs/modules/yenta.h -@device_driver_3c574_cs_TRUE@am__append_99 = \ +@device_driver_3c574_cs_TRUE@am__append_100 = \ @device_driver_3c574_cs_TRUE@ linux/pcmcia-cs/clients/3c574_cs.c -@device_driver_3c589_cs_TRUE@am__append_100 = \ +@device_driver_3c589_cs_TRUE@am__append_101 = \ @device_driver_3c589_cs_TRUE@ linux/pcmcia-cs/clients/3c589_cs.c -@device_driver_axnet_cs_TRUE@am__append_101 = \ +@device_driver_axnet_cs_TRUE@am__append_102 = \ @device_driver_axnet_cs_TRUE@ linux/pcmcia-cs/clients/ax8390.h \ @device_driver_axnet_cs_TRUE@ linux/pcmcia-cs/clients/axnet_cs.c -@device_driver_fmvj18x_cs_TRUE@am__append_102 = \ +@device_driver_fmvj18x_cs_TRUE@am__append_103 = \ @device_driver_fmvj18x_cs_TRUE@ linux/pcmcia-cs/clients/fmvj18x_cs.c -@device_driver_nmclan_cs_TRUE@am__append_103 = \ +@device_driver_nmclan_cs_TRUE@am__append_104 = \ @device_driver_nmclan_cs_TRUE@ linux/pcmcia-cs/clients/nmclan_cs.c -@device_driver_pcnet_cs_TRUE@am__append_104 = \ +@device_driver_pcnet_cs_TRUE@am__append_105 = \ @device_driver_pcnet_cs_TRUE@ linux/pcmcia-cs/clients/pcnet_cs.c \ @device_driver_pcnet_cs_TRUE@ linux/src/drivers/net/8390.c -@device_driver_smc91c92_cs_TRUE@am__append_105 = \ +@device_driver_smc91c92_cs_TRUE@am__append_106 = \ @device_driver_smc91c92_cs_TRUE@ linux/pcmcia-cs/clients/ositech.h \ @device_driver_smc91c92_cs_TRUE@ linux/pcmcia-cs/clients/smc91c92_cs.c -@device_driver_xirc2ps_cs_TRUE@am__append_106 = \ +@device_driver_xirc2ps_cs_TRUE@am__append_107 = \ @device_driver_xirc2ps_cs_TRUE@ linux/pcmcia-cs/clients/xirc2ps_cs.c -@device_driver_orinoco_cs_TRUE@am__append_107 = \ +@device_driver_orinoco_cs_TRUE@am__append_108 = \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/glue/wireless_glue.h \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/hermes.c \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/hermes.h \ @@ -712,12 +691,12 @@ DIST_COMMON = README $(am__configure_dep @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/orinoco.h \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/orinoco_cs.c -@HOST_ix86_TRUE@am__append_108 = \ +@HOST_ix86_TRUE@am__append_109 = \ @HOST_ix86_TRUE@ i386/linux/dev/include/linux/autoconf.h \ @HOST_ix86_TRUE@ i386/linux/dev/include/linux_emul.h \ @HOST_ix86_TRUE@ linux/src/arch/i386/lib/semaphore.S -@HOST_ix86_TRUE@am__append_109 = \ +@HOST_ix86_TRUE@am__append_110 = \ @HOST_ix86_TRUE@ i386/i386at/autoconf.c \ @HOST_ix86_TRUE@ i386/i386at/boothdr.S \ @HOST_ix86_TRUE@ i386/i386at/com.c \ @@ -755,7 +734,7 @@ DIST_COMMON = README $(am__configure_dep # # `lpr' device support. # -@HOST_ix86_TRUE@@enable_lpr_TRUE@am__append_110 = \ +@HOST_ix86_TRUE@@enable_lpr_TRUE@am__append_111 = \ @HOST_ix86_TRUE@@enable_lpr_TRUE@ i386/i386at/lpr.c \ @HOST_ix86_TRUE@@enable_lpr_TRUE@ i386/i386at/lprreg.h @@ -763,7 +742,7 @@ DIST_COMMON = README $(am__configure_dep # # Further source files for any i386 kernel. # -@HOST_ix86_TRUE@am__append_111 = \ +@HOST_ix86_TRUE@am__append_112 = \ @HOST_ix86_TRUE@ i386/i386/ast.h \ @HOST_ix86_TRUE@ i386/i386/ast_check.c \ @HOST_ix86_TRUE@ i386/i386/ast_types.h \ @@ -849,21 +828,21 @@ DIST_COMMON = README $(am__configure_dep # # Instead of listing each file individually... -@HOST_ix86_TRUE@am__append_112 = i386/i386/mach_i386.srv \ +@HOST_ix86_TRUE@am__append_113 = i386/i386/mach_i386.srv \ @HOST_ix86_TRUE@ i386/i386/i386asm.sym i386/ldscript \ @HOST_ix86_TRUE@ i386/README-Drivers i386/include # # KDB support. # -@HOST_ix86_TRUE@@enable_kdb_TRUE@am__append_113 = \ +@HOST_ix86_TRUE@@enable_kdb_TRUE@am__append_114 = \ @HOST_ix86_TRUE@@enable_kdb_TRUE@ i386/i386/_setjmp.S # # Files from the generic sources that we want. # -@HOST_ix86_TRUE@am__append_114 = \ +@HOST_ix86_TRUE@am__append_115 = \ @HOST_ix86_TRUE@ chips/busses.c \ @HOST_ix86_TRUE@ chips/busses.h \ @HOST_ix86_TRUE@ device/cirbuf.c @@ -874,13 +853,13 @@ DIST_COMMON = README $(am__configure_dep # # See Makefrag.am about lib_dep_tr_for_defs.a. -@HOST_ix86_TRUE@am__append_115 = \ +@HOST_ix86_TRUE@am__append_116 = \ @HOST_ix86_TRUE@ i386/i386/mach_i386.server.defs.c -@HOST_ix86_TRUE@am__append_116 = i386/i386/mach_i386.server.h \ +@HOST_ix86_TRUE@am__append_117 = i386/i386/mach_i386.server.h \ @HOST_ix86_TRUE@ i386/i386/mach_i386.server.c \ @HOST_ix86_TRUE@ i386/i386/i386asm.h -@HOST_ix86_TRUE@@PLATFORM_at_TRUE@am__append_117 = \ +@HOST_ix86_TRUE@@PLATFORM_at_TRUE@am__append_118 = \ @HOST_ix86_TRUE@@PLATFORM_at_TRUE@ --defsym _START=0x100000 \ @HOST_ix86_TRUE@@PLATFORM_at_TRUE@ -T '$(srcdir)'/i386/ldscript @@ -966,10 +945,10 @@ am__libkernel_a_SOURCES_DIST = ddb/db_ac kern/time_out.h kern/time_stamp.c kern/time_stamp.h \ kern/timer.c kern/timer.h kern/xpr.c kern/xpr.h kern/zalloc.c \ kern/zalloc.h kern/elf-load.c kern/boot_script.c \ - util/putchar.c util/puts.c vm/memory_object.c \ - vm/memory_object.h vm/pmap.h vm/vm_debug.c vm/vm_external.c \ - vm/vm_external.h vm/vm_fault.c vm/vm_fault.h vm/vm_init.c \ - vm/vm_kern.c vm/vm_kern.h vm/vm_map.c vm/vm_map.h \ + util/putchar.c util/puts.c vm/memory_object_proxy.c \ + vm/memory_object.c vm/memory_object.h vm/pmap.h vm/vm_debug.c \ + vm/vm_external.c vm/vm_external.h vm/vm_fault.c vm/vm_fault.h \ + vm/vm_init.c vm/vm_kern.c vm/vm_kern.h vm/vm_map.c vm/vm_map.h \ vm/vm_object.c vm/vm_object.h vm/vm_page.h vm/vm_pageout.c \ vm/vm_pageout.h vm/vm_resident.c vm/vm_user.c vm/vm_user.h \ device/blkio.c device/buf.h device/chario.c device/cirbuf.h \ @@ -1128,9 +1107,10 @@ am_libkernel_a_OBJECTS = $(am__objects_2 kern/xpr.$(OBJEXT) kern/zalloc.$(OBJEXT) \ kern/elf-load.$(OBJEXT) kern/boot_script.$(OBJEXT) \ util/putchar.$(OBJEXT) util/puts.$(OBJEXT) \ - vm/memory_object.$(OBJEXT) vm/vm_debug.$(OBJEXT) \ - vm/vm_external.$(OBJEXT) vm/vm_fault.$(OBJEXT) \ - vm/vm_init.$(OBJEXT) vm/vm_kern.$(OBJEXT) vm/vm_map.$(OBJEXT) \ + vm/memory_object_proxy.$(OBJEXT) vm/memory_object.$(OBJEXT) \ + vm/vm_debug.$(OBJEXT) vm/vm_external.$(OBJEXT) \ + vm/vm_fault.$(OBJEXT) vm/vm_init.$(OBJEXT) \ + vm/vm_kern.$(OBJEXT) vm/vm_map.$(OBJEXT) \ vm/vm_object.$(OBJEXT) vm/vm_pageout.$(OBJEXT) \ vm/vm_resident.$(OBJEXT) vm/vm_user.$(OBJEXT) \ device/blkio.$(OBJEXT) device/chario.$(OBJEXT) \ @@ -1275,7 +1255,8 @@ am__liblinux_a_SOURCES_DIST = linux/dev/ linux/src/drivers/net/rtl8139.c \ linux/src/drivers/net/seeq8005.c \ linux/src/drivers/net/seeq8005.h \ - linux/src/drivers/net/sk_g16.c linux/src/drivers/net/sk_g16.h \ + linux/src/drivers/net/sis900.c linux/src/drivers/net/sk_g16.c \ + linux/src/drivers/net/sk_g16.h \ linux/src/drivers/net/smc-ultra.c \ linux/src/drivers/net/smc-ultra32.c \ linux/src/drivers/net/starfire.c \ @@ -1386,23 +1367,24 @@ am__liblinux_a_SOURCES_DIST = linux/dev/ @device_driver_pcnet32_TRUE@am__objects_78 = linux/src/drivers/net/liblinux_a-pcnet32.$(OBJEXT) @device_driver_rtl8139_TRUE@am__objects_79 = linux/src/drivers/net/liblinux_a-rtl8139.$(OBJEXT) @device_driver_seeq8005_TRUE@am__objects_80 = linux/src/drivers/net/liblinux_a-seeq8005.$(OBJEXT) -@device_driver_sk_g16_TRUE@am__objects_81 = linux/src/drivers/net/liblinux_a-sk_g16.$(OBJEXT) -@device_driver_smc_ultra_TRUE@am__objects_82 = linux/src/drivers/net/liblinux_a-smc-ultra.$(OBJEXT) \ +@device_driver_sis900_TRUE@am__objects_81 = linux/src/drivers/net/liblinux_a-sis900.$(OBJEXT) +@device_driver_sk_g16_TRUE@am__objects_82 = linux/src/drivers/net/liblinux_a-sk_g16.$(OBJEXT) +@device_driver_smc_ultra_TRUE@am__objects_83 = linux/src/drivers/net/liblinux_a-smc-ultra.$(OBJEXT) \ @device_driver_smc_ultra_TRUE@ linux/src/drivers/net/liblinux_a-8390.$(OBJEXT) -@device_driver_smc_ultra32_TRUE@am__objects_83 = linux/src/drivers/net/liblinux_a-smc-ultra32.$(OBJEXT) \ +@device_driver_smc_ultra32_TRUE@am__objects_84 = linux/src/drivers/net/liblinux_a-smc-ultra32.$(OBJEXT) \ @device_driver_smc_ultra32_TRUE@ linux/src/drivers/net/liblinux_a-8390.$(OBJEXT) -@device_driver_starfire_TRUE@am__objects_84 = linux/src/drivers/net/liblinux_a-starfire.$(OBJEXT) -@device_driver_sundance_TRUE@am__objects_85 = linux/src/drivers/net/liblinux_a-sundance.$(OBJEXT) -@device_driver_tlan_TRUE@am__objects_86 = linux/src/drivers/net/liblinux_a-tlan.$(OBJEXT) -@device_driver_tulip_TRUE@am__objects_87 = linux/src/drivers/net/liblinux_a-tulip.$(OBJEXT) -@device_driver_via_rhine_TRUE@am__objects_88 = linux/src/drivers/net/liblinux_a-via-rhine.$(OBJEXT) -@device_driver_wavelan_TRUE@am__objects_89 = linux/src/drivers/net/liblinux_a-wavelan.$(OBJEXT) -@device_driver_wd_TRUE@am__objects_90 = linux/src/drivers/net/liblinux_a-wd.$(OBJEXT) -@device_driver_winbond_840_TRUE@am__objects_91 = linux/src/drivers/net/liblinux_a-winbond-840.$(OBJEXT) \ +@device_driver_starfire_TRUE@am__objects_85 = linux/src/drivers/net/liblinux_a-starfire.$(OBJEXT) +@device_driver_sundance_TRUE@am__objects_86 = linux/src/drivers/net/liblinux_a-sundance.$(OBJEXT) +@device_driver_tlan_TRUE@am__objects_87 = linux/src/drivers/net/liblinux_a-tlan.$(OBJEXT) +@device_driver_tulip_TRUE@am__objects_88 = linux/src/drivers/net/liblinux_a-tulip.$(OBJEXT) +@device_driver_via_rhine_TRUE@am__objects_89 = linux/src/drivers/net/liblinux_a-via-rhine.$(OBJEXT) +@device_driver_wavelan_TRUE@am__objects_90 = linux/src/drivers/net/liblinux_a-wavelan.$(OBJEXT) +@device_driver_wd_TRUE@am__objects_91 = linux/src/drivers/net/liblinux_a-wd.$(OBJEXT) +@device_driver_winbond_840_TRUE@am__objects_92 = linux/src/drivers/net/liblinux_a-winbond-840.$(OBJEXT) \ @device_driver_winbond_840_TRUE@ linux/src/drivers/net/liblinux_a-8390.$(OBJEXT) -@device_driver_yellowfin_TRUE@am__objects_92 = linux/src/drivers/net/liblinux_a-yellowfin.$(OBJEXT) -@device_driver_znet_TRUE@am__objects_93 = linux/src/drivers/net/liblinux_a-znet.$(OBJEXT) -@HOST_ix86_TRUE@am__objects_94 = linux/src/arch/i386/lib/liblinux_a-semaphore.$(OBJEXT) +@device_driver_yellowfin_TRUE@am__objects_93 = linux/src/drivers/net/liblinux_a-yellowfin.$(OBJEXT) +@device_driver_znet_TRUE@am__objects_94 = linux/src/drivers/net/liblinux_a-znet.$(OBJEXT) +@HOST_ix86_TRUE@am__objects_95 = linux/src/arch/i386/lib/liblinux_a-semaphore.$(OBJEXT) am_liblinux_a_OBJECTS = linux/dev/init/liblinux_a-version.$(OBJEXT) \ linux/dev/kernel/liblinux_a-softirq.$(OBJEXT) \ linux/src/arch/i386/lib/liblinux_a-delay.$(OBJEXT) \ @@ -1449,7 +1431,7 @@ am_liblinux_a_OBJECTS = linux/dev/init/l $(am__objects_85) $(am__objects_86) $(am__objects_87) \ $(am__objects_88) $(am__objects_89) $(am__objects_90) \ $(am__objects_91) $(am__objects_92) $(am__objects_93) \ - $(am__objects_94) + $(am__objects_94) $(am__objects_95) liblinux_a_OBJECTS = $(am_liblinux_a_OBJECTS) liblinux_pcmcia_cs_clients_a_AR = $(AR) $(ARFLAGS) liblinux_pcmcia_cs_clients_a_LIBADD = @@ -1464,19 +1446,19 @@ am__liblinux_pcmcia_cs_clients_a_SOURCES linux/src/drivers/net/8390.c linux/pcmcia-cs/clients/ositech.h \ linux/pcmcia-cs/clients/smc91c92_cs.c \ linux/pcmcia-cs/clients/xirc2ps_cs.c -@device_driver_3c574_cs_TRUE@am__objects_95 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-3c574_cs.$(OBJEXT) -@device_driver_3c589_cs_TRUE@am__objects_96 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-3c589_cs.$(OBJEXT) -@device_driver_axnet_cs_TRUE@am__objects_97 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-axnet_cs.$(OBJEXT) -@device_driver_fmvj18x_cs_TRUE@am__objects_98 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-fmvj18x_cs.$(OBJEXT) -@device_driver_nmclan_cs_TRUE@am__objects_99 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-nmclan_cs.$(OBJEXT) -@device_driver_pcnet_cs_TRUE@am__objects_100 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-pcnet_cs.$(OBJEXT) \ +@device_driver_3c574_cs_TRUE@am__objects_96 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-3c574_cs.$(OBJEXT) +@device_driver_3c589_cs_TRUE@am__objects_97 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-3c589_cs.$(OBJEXT) +@device_driver_axnet_cs_TRUE@am__objects_98 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-axnet_cs.$(OBJEXT) +@device_driver_fmvj18x_cs_TRUE@am__objects_99 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-fmvj18x_cs.$(OBJEXT) +@device_driver_nmclan_cs_TRUE@am__objects_100 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-nmclan_cs.$(OBJEXT) +@device_driver_pcnet_cs_TRUE@am__objects_101 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-pcnet_cs.$(OBJEXT) \ @device_driver_pcnet_cs_TRUE@ linux/src/drivers/net/liblinux_pcmcia_cs_clients_a-8390.$(OBJEXT) -@device_driver_smc91c92_cs_TRUE@am__objects_101 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-smc91c92_cs.$(OBJEXT) -@device_driver_xirc2ps_cs_TRUE@am__objects_102 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-xirc2ps_cs.$(OBJEXT) -am_liblinux_pcmcia_cs_clients_a_OBJECTS = $(am__objects_95) \ - $(am__objects_96) $(am__objects_97) $(am__objects_98) \ - $(am__objects_99) $(am__objects_100) $(am__objects_101) \ - $(am__objects_102) +@device_driver_smc91c92_cs_TRUE@am__objects_102 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-smc91c92_cs.$(OBJEXT) +@device_driver_xirc2ps_cs_TRUE@am__objects_103 = linux/pcmcia-cs/clients/liblinux_pcmcia_cs_clients_a-xirc2ps_cs.$(OBJEXT) +am_liblinux_pcmcia_cs_clients_a_OBJECTS = $(am__objects_96) \ + $(am__objects_97) $(am__objects_98) $(am__objects_99) \ + $(am__objects_100) $(am__objects_101) $(am__objects_102) \ + $(am__objects_103) liblinux_pcmcia_cs_clients_a_OBJECTS = \ $(am_liblinux_pcmcia_cs_clients_a_OBJECTS) liblinux_pcmcia_cs_modules_a_AR = $(AR) $(ARFLAGS) @@ -1501,7 +1483,7 @@ am__liblinux_pcmcia_cs_modules_a_SOURCES linux/pcmcia-cs/modules/topic.h \ linux/pcmcia-cs/modules/vg468.h \ linux/pcmcia-cs/modules/yenta.h -@device_driver_i82365_TRUE@am__objects_103 = linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-i82365.$(OBJEXT) +@device_driver_i82365_TRUE@am__objects_104 = linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-i82365.$(OBJEXT) am_liblinux_pcmcia_cs_modules_a_OBJECTS = linux/pcmcia-cs/glue/liblinux_pcmcia_cs_modules_a-pcmcia.$(OBJEXT) \ linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-cs.$(OBJEXT) \ linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-ds.$(OBJEXT) \ @@ -1509,7 +1491,7 @@ am_liblinux_pcmcia_cs_modules_a_OBJECTS linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-bulkmem.$(OBJEXT) \ linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-cistpl.$(OBJEXT) \ linux/pcmcia-cs/modules/liblinux_pcmcia_cs_modules_a-pci_fixup.$(OBJEXT) \ - $(am__objects_103) + $(am__objects_104) liblinux_pcmcia_cs_modules_a_OBJECTS = \ $(am_liblinux_pcmcia_cs_modules_a_OBJECTS) liblinux_pcmcia_cs_wireless_a_AR = $(AR) $(ARFLAGS) @@ -1523,10 +1505,10 @@ am__liblinux_pcmcia_cs_wireless_a_SOURCE linux/pcmcia-cs/wireless/orinoco.c \ linux/pcmcia-cs/wireless/orinoco.h \ linux/pcmcia-cs/wireless/orinoco_cs.c -@device_driver_orinoco_cs_TRUE@am__objects_104 = linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-hermes.$(OBJEXT) \ +@device_driver_orinoco_cs_TRUE@am__objects_105 = linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-hermes.$(OBJEXT) \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-orinoco.$(OBJEXT) \ @device_driver_orinoco_cs_TRUE@ linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-orinoco_cs.$(OBJEXT) -am_liblinux_pcmcia_cs_wireless_a_OBJECTS = $(am__objects_104) +am_liblinux_pcmcia_cs_wireless_a_OBJECTS = $(am__objects_105) liblinux_pcmcia_cs_wireless_a_OBJECTS = \ $(am_liblinux_pcmcia_cs_wireless_a_OBJECTS) am__installdirs = "$(DESTDIR)$(exec_bootdir)" "$(DESTDIR)$(infodir)" \ @@ -1568,14 +1550,13 @@ DIST_SOURCES = $(am__libkernel_a_SOURCES $(am__liblinux_pcmcia_cs_modules_a_SOURCES_DIST) \ $(am__liblinux_pcmcia_cs_wireless_a_SOURCES_DIST) \ $(gnumach_SOURCES) $(gnumach_o_SOURCES) -INFO_DEPS = $(srcdir)/doc/mach.info TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux -DVIS = doc/mach.dvi -PDFS = doc/mach.pdf -PSS = doc/mach.ps -HTMLS = doc/mach.html -TEXINFOS = doc/mach.texi +DVIS = +PDFS = +PSS = +HTMLS = +TEXINFOS = TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html @@ -1857,6 +1838,8 @@ device_driver_seagate_FALSE = @device_dr device_driver_seagate_TRUE = @device_driver_seagate_TRUE@ device_driver_seeq8005_FALSE = @device_driver_seeq8005_FALSE@ device_driver_seeq8005_TRUE = @device_driver_seeq8005_TRUE@ +device_driver_sis900_FALSE = @device_driver_sis900_FALSE@ +device_driver_sis900_TRUE = @device_driver_sis900_TRUE@ device_driver_sk_g16_FALSE = @device_driver_sk_g16_FALSE@ device_driver_sk_g16_TRUE = @device_driver_sk_g16_TRUE@ device_driver_smc91c92_cs_FALSE = @device_driver_smc91c92_cs_FALSE@ @@ -1959,8 +1942,7 @@ EXTRA_DIST = gensym.awk ipc/mach_port.sr linux/src/drivers/scsi/NCR5380.h linux/src/drivers/net/8390.h \ linux/src/drivers/net/kern_compat.h linux/pcmcia-cs/glue/ds.c \ linux/dev/README linux/src/COPYING linux/dev/include \ - linux/src/include linux/pcmcia-cs/include $(am__append_112) \ - $(mach_TEXINFOS) \ + linux/src/include linux/pcmcia-cs/include $(am__append_113) \ Makefile.correct_output_files_for_.S_files.patch \ config.status.dep.patch ChangeLog.0 ChangeLog.00 DEVELOPMENT @@ -1983,9 +1965,9 @@ DISTCHECK_CONFIGURE_FLAGS = --enable-kdb # about what # we really want to do. noinst_LIBRARIES = libkernel.a lib_dep_tr_for_defs.a $(am__append_4) \ - $(am__append_96) + $(am__append_97) TESTS = tests/test-mbchk -info_TEXINFOS = doc/mach.texi +info_TEXINFOS = # kern/mach.server.defs # kern/mach4.server.defs # kern/mach_debug.server.defs @@ -2082,10 +2064,10 @@ libkernel_a_SOURCES = $(am__append_2) ip kern/time_out.h kern/time_stamp.c kern/time_stamp.h \ kern/timer.c kern/timer.h kern/xpr.c kern/xpr.h kern/zalloc.c \ kern/zalloc.h kern/elf-load.c kern/boot_script.c \ - util/putchar.c util/puts.c vm/memory_object.c \ - vm/memory_object.h vm/pmap.h vm/vm_debug.c vm/vm_external.c \ - vm/vm_external.h vm/vm_fault.c vm/vm_fault.h vm/vm_init.c \ - vm/vm_kern.c vm/vm_kern.h vm/vm_map.c vm/vm_map.h \ + util/putchar.c util/puts.c vm/memory_object_proxy.c \ + vm/memory_object.c vm/memory_object.h vm/pmap.h vm/vm_debug.c \ + vm/vm_external.c vm/vm_external.h vm/vm_fault.c vm/vm_fault.h \ + vm/vm_init.c vm/vm_kern.c vm/vm_kern.h vm/vm_map.c vm/vm_map.h \ vm/vm_object.c vm/vm_object.h vm/vm_page.h vm/vm_pageout.c \ vm/vm_pageout.h vm/vm_resident.c vm/vm_user.c vm/vm_user.h \ device/blkio.c device/buf.h device/chario.c device/cirbuf.h \ @@ -2096,8 +2078,8 @@ libkernel_a_SOURCES = $(am__append_2) ip device/ds_routines.h device/errno.h device/if_ether.h \ device/if_hdr.h device/io_req.h device/kmsg.h device/net_io.c \ device/net_io.h device/param.h device/subrs.c device/tty.h \ - $(am__append_3) $(am__append_109) $(am__append_110) \ - $(am__append_111) $(am__append_113) $(am__append_114) + $(am__append_3) $(am__append_110) $(am__append_111) \ + $(am__append_112) $(am__append_114) $(am__append_115) # # Version number. @@ -2113,10 +2095,10 @@ nodist_libkernel_a_SOURCES = version.c v kern/mach4.server.h kern/mach4.server.c \ kern/mach_debug.server.h kern/mach_debug.server.c \ kern/mach_host.server.h kern/mach_host.server.c \ - $(am__append_116) -gnumach_o_LDADD = libkernel.a $(am__append_5) $(am__append_97) + $(am__append_117) +gnumach_o_LDADD = libkernel.a $(am__append_5) $(am__append_98) gnumach_SOURCES = -gnumach_LINKFLAGS = $(am__append_117) +gnumach_LINKFLAGS = $(am__append_118) # # Installation. @@ -2219,7 +2201,7 @@ nodist_lib_dep_tr_for_defs_a_SOURCES = device/device.server.defs.c device/device_pager.server.defs.c \ ipc/mach_port.server.defs.c kern/mach.server.defs.c \ kern/mach4.server.defs.c kern/mach_debug.server.defs.c \ - kern/mach_host.server.defs.c $(am__append_115) + kern/mach_host.server.defs.c $(am__append_116) # Preprocess only. lib_dep_tr_for_defs_a_CPPFLAGS = $(AM_CPPFLAGS) \ -E @@ -2280,7 +2262,8 @@ liblinux_a_SOURCES = linux/dev/init/vers $(am__append_85) $(am__append_86) $(am__append_87) \ $(am__append_88) $(am__append_89) $(am__append_90) \ $(am__append_91) $(am__append_92) $(am__append_93) \ - $(am__append_94) $(am__append_95) $(am__append_108) + $(am__append_94) $(am__append_95) $(am__append_96) \ + $(am__append_109) # pcmcia-cs. liblinux_pcmcia_cs_modules_a_CPPFLAGS = $(liblinux_a_CPPFLAGS) \ @@ -2297,24 +2280,24 @@ liblinux_pcmcia_cs_modules_a_SOURCES = l linux/pcmcia-cs/modules/rsrc_mgr.c \ linux/pcmcia-cs/modules/bulkmem.c \ linux/pcmcia-cs/modules/cistpl.c \ - linux/pcmcia-cs/modules/pci_fixup.c $(am__append_98) + linux/pcmcia-cs/modules/pci_fixup.c $(am__append_99) liblinux_pcmcia_cs_clients_a_CPPFLAGS = $(liblinux_a_CPPFLAGS) \ -DPCMCIA_CLIENT -I$(srcdir)/linux/pcmcia-cs/include liblinux_pcmcia_cs_clients_a_CFLAGS = $(liblinux_a_CFLAGS) \ -include $(srcdir)/linux/pcmcia-cs/glue/pcmcia_glue.h -liblinux_pcmcia_cs_clients_a_SOURCES = $(am__append_99) \ - $(am__append_100) $(am__append_101) $(am__append_102) \ - $(am__append_103) $(am__append_104) $(am__append_105) \ - $(am__append_106) +liblinux_pcmcia_cs_clients_a_SOURCES = $(am__append_100) \ + $(am__append_101) $(am__append_102) $(am__append_103) \ + $(am__append_104) $(am__append_105) $(am__append_106) \ + $(am__append_107) liblinux_pcmcia_cs_wireless_a_CPPFLAGS = $(liblinux_a_CPPFLAGS) \ -I$(srcdir)/linux/pcmcia-cs/include liblinux_pcmcia_cs_wireless_a_CFLAGS = $(liblinux_a_CFLAGS) \ -include $(srcdir)/linux/pcmcia-cs/glue/wireless_glue.h -liblinux_pcmcia_cs_wireless_a_SOURCES = $(am__append_107) +liblinux_pcmcia_cs_wireless_a_SOURCES = $(am__append_108) # # Installation. @@ -2340,14 +2323,6 @@ liblinux_pcmcia_cs_wireless_a_SOURCES = @HOST_ix86_TRUE@ i386/include/mach/i386/vm_param.h \ @HOST_ix86_TRUE@ i386/include/mach/i386/vm_types.h -mach_TEXINFOS = \ - doc/fdl.texi doc/gpl.texi - - -# -# Web pages of the GNU Mach Reference Manual. -# -web = doc/web # Makerules: how to do some things. @@ -2356,6 +2331,7 @@ web = doc/web # Test suite. # Documentation. +#include doc/Makefrag.am # # Kernel Image @@ -2390,7 +2366,7 @@ all: config.h .SUFFIXES: .S .c .dvi .o .obj .ps am--refresh: @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/Makerules.am $(srcdir)/Makefrag.am $(srcdir)/linux/Makefrag.am $(srcdir)/i386/linux/Makefrag.am $(srcdir)/i386/Makefrag.am $(srcdir)/tests/Makefrag.am $(srcdir)/doc/Makefrag.am $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/Makerules.am $(srcdir)/Makefrag.am $(srcdir)/linux/Makefrag.am $(srcdir)/i386/linux/Makefrag.am $(srcdir)/i386/Makefrag.am $(srcdir)/tests/Makefrag.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -2680,6 +2656,8 @@ util/putchar.$(OBJEXT): util/$(am__dirst util/$(DEPDIR)/$(am__dirstamp) util/puts.$(OBJEXT): util/$(am__dirstamp) \ util/$(DEPDIR)/$(am__dirstamp) +vm/memory_object_proxy.$(OBJEXT): vm/$(am__dirstamp) \ + vm/$(DEPDIR)/$(am__dirstamp) vm/memory_object.$(OBJEXT): vm/$(am__dirstamp) \ vm/$(DEPDIR)/$(am__dirstamp) vm/vm_debug.$(OBJEXT): vm/$(am__dirstamp) vm/$(DEPDIR)/$(am__dirstamp) @@ -3290,6 +3268,9 @@ linux/src/drivers/net/liblinux_a-rtl8139 linux/src/drivers/net/liblinux_a-seeq8005.$(OBJEXT): \ linux/src/drivers/net/$(am__dirstamp) \ linux/src/drivers/net/$(DEPDIR)/$(am__dirstamp) +linux/src/drivers/net/liblinux_a-sis900.$(OBJEXT): \ + linux/src/drivers/net/$(am__dirstamp) \ + linux/src/drivers/net/$(DEPDIR)/$(am__dirstamp) linux/src/drivers/net/liblinux_a-sk_g16.$(OBJEXT): \ linux/src/drivers/net/$(am__dirstamp) \ linux/src/drivers/net/$(DEPDIR)/$(am__dirstamp) @@ -3722,6 +3703,7 @@ mostlyclean-compile: -rm -f linux/src/drivers/net/liblinux_a-pcnet32.$(OBJEXT) -rm -f linux/src/drivers/net/liblinux_a-rtl8139.$(OBJEXT) -rm -f linux/src/drivers/net/liblinux_a-seeq8005.$(OBJEXT) + -rm -f linux/src/drivers/net/liblinux_a-sis900.$(OBJEXT) -rm -f linux/src/drivers/net/liblinux_a-sk_g16.$(OBJEXT) -rm -f linux/src/drivers/net/liblinux_a-smc-ultra.$(OBJEXT) -rm -f linux/src/drivers/net/liblinux_a-smc-ultra32.$(OBJEXT) @@ -3780,6 +3762,7 @@ mostlyclean-compile: -rm -f vm/lib_dep_tr_for_defs_a-memory_object_user.user.defs.$(OBJEXT) -rm -f vm/memory_object.$(OBJEXT) -rm -f vm/memory_object_default.user.$(OBJEXT) + -rm -f vm/memory_object_proxy.$(OBJEXT) -rm -f vm/memory_object_user.user.$(OBJEXT) -rm -f vm/vm_debug.$(OBJEXT) -rm -f vm/vm_external.$(OBJEXT) @@ -4041,6 +4024,7 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-pcnet32.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-rtl8139.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-seeq8005.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-sk_g16.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-smc-ultra.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@linux/src/drivers/net/$(DEPDIR)/liblinux_a-smc-ultra32.Po@am__quote@ @@ -4099,6 +4083,7 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/lib_dep_tr_for_defs_a-memory_object_user.user.defs.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/memory_object.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/memory_object_default.user.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/memory_object_proxy.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/memory_object_user.user.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/vm_debug.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@vm/$(DEPDIR)/vm_external.Po@am__quote@ @@ -5819,6 +5804,20 @@ linux/src/drivers/net/liblinux_a-seeq800 @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -c -o linux/src/drivers/net/liblinux_a-seeq8005.obj `if test -f 'linux/src/drivers/net/seeq8005.c'; then $(CYGPATH_W) 'linux/src/drivers/net/seeq8005.c'; else $(CYGPATH_W) '$(srcdir)/linux/src/drivers/net/seeq8005.c'; fi` +linux/src/drivers/net/liblinux_a-sis900.o: linux/src/drivers/net/sis900.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -MT linux/src/drivers/net/liblinux_a-sis900.o -MD -MP -MF "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo" -c -o linux/src/drivers/net/liblinux_a-sis900.o `test -f 'linux/src/drivers/net/sis900.c' || echo '$(srcdir)/'`linux/src/drivers/net/sis900.c; \ +@am__fastdepCC_TRUE@ then mv -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo" "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Po"; else rm -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='linux/src/drivers/net/sis900.c' object='linux/src/drivers/net/liblinux_a-sis900.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -c -o linux/src/drivers/net/liblinux_a-sis900.o `test -f 'linux/src/drivers/net/sis900.c' || echo '$(srcdir)/'`linux/src/drivers/net/sis900.c + +linux/src/drivers/net/liblinux_a-sis900.obj: linux/src/drivers/net/sis900.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -MT linux/src/drivers/net/liblinux_a-sis900.obj -MD -MP -MF "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo" -c -o linux/src/drivers/net/liblinux_a-sis900.obj `if test -f 'linux/src/drivers/net/sis900.c'; then $(CYGPATH_W) 'linux/src/drivers/net/sis900.c'; else $(CYGPATH_W) '$(srcdir)/linux/src/drivers/net/sis900.c'; fi`; \ +@am__fastdepCC_TRUE@ then mv -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo" "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Po"; else rm -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sis900.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='linux/src/drivers/net/sis900.c' object='linux/src/drivers/net/liblinux_a-sis900.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -c -o linux/src/drivers/net/liblinux_a-sis900.obj `if test -f 'linux/src/drivers/net/sis900.c'; then $(CYGPATH_W) 'linux/src/drivers/net/sis900.c'; else $(CYGPATH_W) '$(srcdir)/linux/src/drivers/net/sis900.c'; fi` + linux/src/drivers/net/liblinux_a-sk_g16.o: linux/src/drivers/net/sk_g16.c @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_a_CFLAGS) $(CFLAGS) -MT linux/src/drivers/net/liblinux_a-sk_g16.o -MD -MP -MF "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sk_g16.Tpo" -c -o linux/src/drivers/net/liblinux_a-sk_g16.o `test -f 'linux/src/drivers/net/sk_g16.c' || echo '$(srcdir)/'`linux/src/drivers/net/sk_g16.c; \ @am__fastdepCC_TRUE@ then mv -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sk_g16.Tpo" "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sk_g16.Po"; else rm -f "linux/src/drivers/net/$(DEPDIR)/liblinux_a-sk_g16.Tpo"; exit 1; fi @@ -6280,74 +6279,6 @@ linux/pcmcia-cs/wireless/liblinux_pcmcia @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='linux/pcmcia-cs/wireless/orinoco_cs.c' object='linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-orinoco_cs.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblinux_pcmcia_cs_wireless_a_CPPFLAGS) $(CPPFLAGS) $(liblinux_pcmcia_cs_wireless_a_CFLAGS) $(CFLAGS) -c -o linux/pcmcia-cs/wireless/liblinux_pcmcia_cs_wireless_a-orinoco_cs.obj `if test -f 'linux/pcmcia-cs/wireless/orinoco_cs.c'; then $(CYGPATH_W) 'linux/pcmcia-cs/wireless/orinoco_cs.c'; else $(CYGPATH_W) '$(srcdir)/linux/pcmcia-cs/wireless/orinoco_cs.c'; fi` -doc/$(am__dirstamp): - @$(mkdir_p) doc - @: > doc/$(am__dirstamp) - -$(srcdir)/doc/mach.info: doc/mach.texi $(srcdir)/doc/version.texi - restore=: && backupdir="$(am__leading_dot)am$$$$" && \ - am__cwd=`pwd` && cd $(srcdir) && \ - rm -rf $$backupdir && mkdir $$backupdir && \ - if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ - for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ - if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ - done; \ - else :; fi && \ - cd "$$am__cwd"; \ - if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ - -o $@ $(srcdir)/doc/mach.texi; \ - then \ - rc=0; \ - cd $(srcdir); \ - else \ - rc=$$?; \ - cd $(srcdir) && \ - $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ - fi; \ - rm -rf $$backupdir; exit $$rc - -doc/mach.dvi: doc/mach.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ - $(TEXI2DVI) -o $@ `test -f 'doc/mach.texi' || echo '$(srcdir)/'`doc/mach.texi - -doc/mach.pdf: doc/mach.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ - $(TEXI2PDF) -o $@ `test -f 'doc/mach.texi' || echo '$(srcdir)/'`doc/mach.texi - -doc/mach.html: doc/mach.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) - rm -rf $(@:.html=.htp) - if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ - -o $(@:.html=.htp) `test -f 'doc/mach.texi' || echo '$(srcdir)/'`doc/mach.texi; \ - then \ - rm -rf $@; \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ - else \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ - exit 1; \ - fi -$(srcdir)/doc/stamp-vti: doc/mach.texi $(top_srcdir)/configure - test -f doc/$(am__dirstamp) || $(MAKE) doc/$(am__dirstamp) - @(dir=.; test -f ./doc/mach.texi || dir=$(srcdir); \ - set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/doc/mach.texi`; \ - echo "@set UPDATED $$1 $$2 $$3"; \ - echo "@set UPDATED-MONTH $$2 $$3"; \ - echo "@set EDITION $(VERSION)"; \ - echo "@set VERSION $(VERSION)") > vti.tmp - @cmp -s vti.tmp $(srcdir)/doc/version.texi \ - || (echo "Updating $(srcdir)/doc/version.texi"; \ - cp vti.tmp $(srcdir)/doc/version.texi) - -@rm -f vti.tmp - @cp $(srcdir)/doc/version.texi $@ - -mostlyclean-vti: - -rm -f vti.tmp - -maintainer-clean-vti: - -rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi .dvi.ps: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) -o $@ $< @@ -6393,9 +6324,7 @@ dist-info: $(INFO_DEPS) done mostlyclean-aminfo: - -rm -rf mach.aux mach.cp mach.cps mach.fn mach.fns mach.ky mach.kys mach.log \ - mach.pg mach.tmp mach.toc mach.tp mach.vr doc/mach.dvi \ - doc/mach.pdf doc/mach.ps doc/mach.html + -rm -rf maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ @@ -6697,7 +6626,7 @@ check-TESTS: $(TESTS) distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) - $(mkdir_p) $(distdir)/. $(distdir)/build-aux $(distdir)/device $(distdir)/doc $(distdir)/i386 $(distdir)/i386/i386 $(distdir)/i386/include/mach/i386 $(distdir)/i386/linux $(distdir)/include/device $(distdir)/include/mach $(distdir)/include/mach/exec $(distdir)/ipc $(distdir)/kern $(distdir)/linux $(distdir)/linux/dev $(distdir)/linux/pcmcia-cs $(distdir)/linux/pcmcia-cs/glue $(distdir)/linux/src $(distdir)/linux/src/drivers/net $(distdir)/linux/src/drivers/scsi $(distdir)/tests $(distdir)/vm + $(mkdir_p) $(distdir)/. $(distdir)/build-aux $(distdir)/device $(distdir)/i386 $(distdir)/i386/i386 $(distdir)/i386/include/mach/i386 $(distdir)/i386/linux $(distdir)/include/device $(distdir)/include/mach $(distdir)/include/mach/exec $(distdir)/ipc $(distdir)/kern $(distdir)/linux $(distdir)/linux/dev $(distdir)/linux/pcmcia-cs $(distdir)/linux/pcmcia-cs/glue $(distdir)/linux/src $(distdir)/linux/src/drivers/net $(distdir)/linux/src/drivers/scsi $(distdir)/tests $(distdir)/vm @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ @@ -6876,7 +6805,6 @@ distclean-generic: -rm -f ddb/$(am__dirstamp) -rm -f device/$(DEPDIR)/$(am__dirstamp) -rm -f device/$(am__dirstamp) - -rm -f doc/$(am__dirstamp) -rm -f i386/i386/$(DEPDIR)/$(am__dirstamp) -rm -f i386/i386/$(am__dirstamp) -rm -f i386/i386at/$(DEPDIR)/$(am__dirstamp) @@ -6954,7 +6882,7 @@ dvi-am: $(DVIS) html: html-recursive -html-am: $(HTMLS) html-local +html-am: $(HTMLS) info: info-recursive @@ -7010,20 +6938,20 @@ maintainer-clean: maintainer-clean-recur -rm -rf ./$(DEPDIR) chips/$(DEPDIR) ddb/$(DEPDIR) device/$(DEPDIR) i386/i386/$(DEPDIR) i386/i386at/$(DEPDIR) i386/intel/$(DEPDIR) ipc/$(DEPDIR) kern/$(DEPDIR) linux/dev/arch/i386/kernel/$(DEPDIR) linux/dev/drivers/block/$(DEPDIR) linux/dev/drivers/net/$(DEPDIR) linux/dev/drivers/scsi/$(DEPDIR) linux/dev/glue/$(DEPDIR) linux/dev/init/$(DEPDIR) linux/dev/kernel/$(DEPDIR) linux/dev/lib/$(DEPDIR) linux/dev/net/core/$(DEPDIR) linux/pcmcia-cs/clients/$(DEPDIR) linux/pcmcia-cs/glue/$(DEPDIR) linux/pcmcia-cs/modules/$(DEPDIR) linux/pcmcia-cs/wireless/$(DEPDIR) linux/src/arch/i386/kernel/$(DEPDIR) linux/src/arch/i386/lib/$(DEPDIR) linux/src/drivers/block/$(DEPDIR) linux/src/drivers/net/$(DEPDIR) linux/src/drivers/pci/$(DEPDIR) linux/src/drivers/scsi/$(DEPDIR) linux/src/lib/$(DEPDIR) util/$(DEPDIR) vm/$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ - maintainer-clean-generic maintainer-clean-vti + maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ - mostlyclean-generic mostlyclean-vti + mostlyclean-generic pdf: pdf-recursive -pdf-am: $(PDFS) pdf-local +pdf-am: $(PDFS) ps: ps-recursive -ps-am: $(PSS) ps-local +ps-am: $(PSS) uninstall-am: uninstall-exec_bootPROGRAMS uninstall-exec_msgidsDATA \ uninstall-include_deviceHEADERS uninstall-include_machHEADERS \ @@ -7040,19 +6968,18 @@ uninstall-info: uninstall-info-recursive distcheck distclean distclean-compile distclean-generic \ distclean-hdr distclean-recursive distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am html-local info info-am install install-am \ - install-data install-data-am install-data-hook install-exec \ - install-exec-am install-exec_bootPROGRAMS \ - install-exec_msgidsDATA install-include_deviceHEADERS \ - install-include_machHEADERS install-include_mach_eXecHEADERS \ + html-am info info-am install install-am install-data \ + install-data-am install-data-hook install-exec install-exec-am \ + install-exec_bootPROGRAMS install-exec_msgidsDATA \ + install-include_deviceHEADERS install-include_machHEADERS \ + install-include_mach_eXecHEADERS \ install-include_mach_i386HEADERS install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-aminfo maintainer-clean-generic \ - maintainer-clean-recursive maintainer-clean-vti mostlyclean \ - mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \ - mostlyclean-recursive mostlyclean-vti pdf pdf-am pdf-local ps \ - ps-am ps-local tags tags-recursive uninstall uninstall-am \ + maintainer-clean-recursive mostlyclean mostlyclean-aminfo \ + mostlyclean-compile mostlyclean-generic mostlyclean-recursive \ + pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-exec_bootPROGRAMS uninstall-exec_msgidsDATA \ uninstall-include_deviceHEADERS uninstall-include_machHEADERS \ uninstall-include_mach_eXecHEADERS \ @@ -7206,87 +7133,6 @@ dist-hook-linux: # # ix86. - -# Prepare a checkout in `$(web)/' of the web pages of the GNU Mach Reference -# Manual, using the same account that was used for the source code. Then -# install the potentially updated files into `$(web)/'. -.PHONY: $(web) -$(web): - if test -d $@/CVS; then :; else \ - mkdir -p $@ $@/CVS && \ - sed -e s%cvsroot%web% \ - < $(top_srcdir)/CVS/Root \ - > $@/CVS/Root && \ - echo hurd/gnumach-doc \ - > $@/CVS/Repository && \ - : > $@/CVS/Entries; \ - fi - cd $@/ && \ - cvs update - $(MAKE) $(AM_MAKEFLAGS) \ - html \ - ps \ - pdf - -# Update the files, if such a checkout exists. -html-local: - if test -d $(web); then \ - ( cd $(web)/ && \ - for f in *.html; do \ - if test -f ../../$(HTMLS)/"$$f"; then :; else \ - echo "\`$$f' isn't anymore. Removing." && \ - rm "$$f" && \ - cvs remove "$$f"; \ - fi; \ - done ) && \ - cp $(HTMLS)/*.html $(web)/ && \ - cd $(web)/ && \ - { cvs add *.html || :; }; \ - fi -ps-local: - if test -d $(web); then \ - ( cd $(web)/ && \ - for f in *.ps; do \ - case \ $(PSS)\ in \ - \ doc/"$$f"\ ) :;; \ - *) echo "\`$$f' isn't anymore. Removing." && \ - rm -f "$$f" "$$f".ps && \ - cvs remove "$$f" "$$f".ps ;; \ - esac; \ - done ) && \ - cp $(PSS) $(web)/ && \ - cd $(web)/ && \ - for f in *.ps; do \ - gzip -9 < "$$f" > "$$f".gz; \ - done && \ - { cvs add *.ps *.ps.gz || :; }; \ - fi -pdf-local: - if test -d $(web); then \ - ( cd $(web)/ && \ - for f in *.pdf; do \ - case \ $(PDFS)\ in \ - \ doc/"$$f"\ ) :;; \ - *) echo "\`$$f' isn't anymore. Removing." && \ - rm "$$f" && \ - cvs remove "$$f";; \ - esac; \ - done ) && \ - cp $(PDFS) $(web)/ && \ - cd $(web)/ && \ - { cvs add *.pdf || :; }; \ - fi -# TODO. There doesn't seem to be a hook or `-local' target suitable for this. -$(srcdir)/doc/version.texi: $(srcdir)/doc/stamp-vti - @if test -d $(web); then :; \ - elif grep -q :ext: $(top_srcdir)/CVS/Root 2> /dev/null; then \ - echo "*** As it seems that you'd be allowed to check in the" \ - "possible resulting fixes, you may cosider running" \ - " \`make $(web)' to get a checkout of the web pages of the" \ - "GNU Mach manual and have possible changes installed into" \ - "\`$(web)/', ready for checking them in in there." && \ - sleep 2; \ - fi gnumach-undef: gnumach.$(OBJEXT) $(NM) -u $< | sed 's/ *U *//;s/^_*//' | sort -u > $@ gnumach-undef-bad: gnumach-undef Makefile