2005-05-01 Andreas B. Mundt * i386/README-Drivers: Likewise. * i386/linux/Makefile.in (linux-net-files): Added 'sis900'. * i386/linux/configure.ac (sis900): New driver. * linux/dev/drivers/net/Space.c: Add conditional probes 'sis900' driver. * linux/src/drivers/net/sis900.c: New file. * linux/src/drivers/net/sis900.h: Likewise. Index: linux/dev/drivers/net/Space.c =================================================================== --- linux/dev/drivers/net/Space.c.orig 2006-02-01 22:58:10.000000000 +0200 +++ linux/dev/drivers/net/Space.c 2007-04-05 07:30:59.000000000 +0300 @@ -93,6 +93,7 @@ extern int yellowfin_probe(struct device extern int eepro100_probe(struct device *); extern int epic100_probe(struct device *); extern int rtl8139_probe(struct device *); +extern int sis900_probe(struct device *); extern int tlan_probe(struct device *); extern int isa515_probe(struct device *); extern int pcnet32_probe(struct device *); @@ -137,6 +138,9 @@ ethif_probe(struct device *dev) #ifdef CONFIG_RTL8139 && rtl8139_probe(dev) #endif +#ifdef CONFIG_SIS900 + && sis900_probe(dev) +#endif #ifdef CONFIG_VIA_RHINE && via_rhine_probe(dev) #endif Index: linux/src/drivers/net/sis900.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux/src/drivers/net/sis900.c 2007-04-05 07:31:00.000000000 +0300 @@ -0,0 +1,1803 @@ +/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. + Copyright 1999 Silicon Integrated System Corporation + Revision: 1.06.11 Apr. 30 2002 + + Modified from the driver which is originally written by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU Public License (GPL), incorporated herein by reference. + Drivers based on this skeleton fall under the GPL and must retain + the authorship (implicit copyright) notice. + + References: + SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, + preliminary Rev. 1.0 Jan. 14, 1998 + SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, + preliminary Rev. 1.0 Nov. 10, 1998 + SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, + preliminary Rev. 1.0 Jan. 18, 1998 + http://www.sis.com.tw/support/databook.htm + + Rev 1.06.11 Apr. 25 2002 Mufasa Yang (mufasa@sis.com.tw) added SiS962 support + Rev 1.06.10 Dec. 18 2001 Hui-Fen Hsu workaround for EDB & RTL8201 PHY + Rev 1.06.09 Sep. 28 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY + Rev 1.06.08 Mar. 2 2001 Hui-Fen Hsu (hfhsu@sis.com.tw) some bug fix & 635M/B support + Rev 1.06.07 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support + Rev 1.06.06 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support + Rev 1.06.05 Aug. 22 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalier workaroung rule + Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release + Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed + Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com) + Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release + Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx + Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support + Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include /* Processor type for cache alignment. */ +#include +#include +#include +#include +#include "sis900.h" + + +#if LINUX_VERSION_CODE < 0x20159 +#define dev_free_skb(skb) dev_kfree_skb (skb, FREE_WRITE); +#else /* Grrr, incompatible changes should change the name. */ +#define dev_free_skb(skb) dev_kfree_skb(skb); +#endif + +static const char *version = +"sis900.c: modified v1.06.11 4/30/2002"; + +static int max_interrupt_work = 20; +static int multicast_filter_limit = 128; + +#define sis900_debug debug +static int sis900_debug = 0; + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) + +enum pci_flags_bit { + PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, + PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, +}; + +struct mac_chip_info { + const char *name; + u16 vendor_id, device_id, flags; + int io_size; + struct device *(*probe) (struct mac_chip_info *mac, long ioaddr, int irq, + int pci_index, unsigned char pci_device_fn, unsigned char pci_bus, struct device * net_dev); +}; +static struct device * sis900_mac_probe (struct mac_chip_info * mac, long ioaddr, int irq, + int pci_index, unsigned char pci_device_fn, + unsigned char pci_bus, struct device * net_dev); +static struct mac_chip_info mac_chip_table[] = { + { "SiS 900 PCI Fast Ethernet", PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900, + PCI_COMMAND_IO|PCI_COMMAND_MASTER, SIS900_TOTAL_SIZE, sis900_mac_probe}, + { "SiS 7016 PCI Fast Ethernet",PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016, + PCI_COMMAND_IO|PCI_COMMAND_MASTER, SIS900_TOTAL_SIZE, sis900_mac_probe}, + {0,}, /* 0 terminatted list. */ +}; + +static void sis900_read_mode(struct device *net_dev, int *speed, int *duplex); + +static struct mii_chip_info { + const char * name; + u16 phy_id0; + u16 phy_id1; + u8 phy_types; +#define HOME 0x0001 +#define LAN 0x0002 +#define MIX 0x0003 +} mii_chip_table[] = { + { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN }, + { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN }, + { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN }, + { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, + { "ICS LAN PHY", 0x0015, 0xF440, LAN }, + { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, + { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, + {0,}, +}; + +struct mii_phy { + struct mii_phy * next; + int phy_addr; + u16 phy_id0; + u16 phy_id1; + u16 status; + u8 phy_types; +}; + +typedef struct _BufferDesc { + u32 link; + u32 cmdsts; + u32 bufptr; +} BufferDesc; + +struct sis900_private { + struct device *next_module; + struct enet_statistics stats; + + /* struct pci_dev * pci_dev;*/ + unsigned char pci_bus; + unsigned char pci_device_fn; + int pci_index; + + struct mac_chip_info * mac; + struct mii_phy * mii; + struct mii_phy * first_mii; /* record the first mii structure */ + unsigned int cur_phy; + + struct timer_list timer; /* Link status detection timer. */ + u8 autong_complete; /* 1: auto-negotiate complete */ + + unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */ + unsigned int cur_tx, dirty_tx; + + /* The saved address of a sent/receive-in-place packet buffer */ + struct sk_buff *tx_skbuff[NUM_TX_DESC]; + struct sk_buff *rx_skbuff[NUM_RX_DESC]; + BufferDesc tx_ring[NUM_TX_DESC]; + BufferDesc rx_ring[NUM_RX_DESC]; + + unsigned int tx_full; /* The Tx queue is full. */ + int LinkOn; +}; + +#ifdef MODULE +#if LINUX_VERSION_CODE > 0x20115 +MODULE_AUTHOR("Jim Huang , Ollie Lho "); +MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver"); +MODULE_PARM(multicast_filter_limit, "i"); +MODULE_PARM(max_interrupt_work, "i"); +MODULE_PARM(debug, "i"); +#endif +#endif + +static int sis900_open(struct device *net_dev); +static int sis900_mii_probe (unsigned char pci_bus, unsigned char pci_device_fn, struct device * net_dev); +static void sis900_init_rxfilter (struct device * net_dev); +static u16 read_eeprom(long ioaddr, int location); +static u16 mdio_read(struct device *net_dev, int phy_id, int location); +static void mdio_write(struct device *net_dev, int phy_id, int location, int val); +static void sis900_timer(unsigned long data); +static void sis900_check_mode (struct device *net_dev, struct mii_phy *mii_phy); +static void sis900_tx_timeout(struct device *net_dev); +static void sis900_init_tx_ring(struct device *net_dev); +static void sis900_init_rx_ring(struct device *net_dev); +static int sis900_start_xmit(struct sk_buff *skb, struct device *net_dev); +static int sis900_rx(struct device *net_dev); +static void sis900_finish_xmit (struct device *net_dev); +static void sis900_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static int sis900_close(struct device *net_dev); +static int mii_ioctl(struct device *net_dev, struct ifreq *rq, int cmd); +static struct enet_statistics *sis900_get_stats(struct device *net_dev); +static u16 sis900_compute_hashtable_index(u8 *addr, u8 revision); +static void set_rx_mode(struct device *net_dev); +static void sis900_reset(struct device *net_dev); +static void sis630_set_eq(struct device *net_dev, u8 revision); +static u16 sis900_default_phy(struct device * net_dev); +static void sis900_set_capability( struct device *net_dev ,struct mii_phy *phy); +static u16 sis900_reset_phy(struct device *net_dev, int phy_addr); +static void sis900_auto_negotiate(struct device *net_dev, int phy_addr); +static void sis900_set_mode (long ioaddr, int speed, int duplex); + +/* A list of all installed SiS900 devices, for removing the driver module. */ +static struct device *root_sis900_dev = NULL; + +#ifdef HAVE_DEVLIST +struct netdev_entry netcard_drv = + {"sis900", sis900_probe, SIS900_TOTAL_SIZE, NULL}; +#endif + +/* walk through every ethernet PCI devices to see if some of them are matched with our card list*/ +int sis900_probe (struct device * net_dev) +{ + int found = 0; + int pci_index = 0; + unsigned char pci_bus, pci_device_fn; + long ioaddr; + int irq; + + if (!pcibios_present()) + return -ENODEV; + + for (; pci_index < 0xff; pci_index++) + { + u16 vendor, device, pci_command; + struct mac_chip_info *mac; + + if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8, pci_index, + &pci_bus, &pci_device_fn) != PCIBIOS_SUCCESSFUL) + break; + + pcibios_read_config_word(pci_bus, pci_device_fn, PCI_VENDOR_ID, &vendor); + pcibios_read_config_word(pci_bus, pci_device_fn, PCI_DEVICE_ID, &device); + + for (mac = mac_chip_table; mac->vendor_id; mac++) + { + if (vendor == mac->vendor_id && device == mac->device_id) break; + } + + /* pci_dev does not match any of our cards */ + if (mac->vendor_id == 0) + continue; + + { + u32 pci_ioaddr; + u8 pci_irq_line; + + pcibios_read_config_byte(pci_bus, pci_device_fn, + PCI_INTERRUPT_LINE, &pci_irq_line); + pcibios_read_config_dword(pci_bus, pci_device_fn, + PCI_BASE_ADDRESS_0, &pci_ioaddr); + ioaddr = pci_ioaddr & ~3; + irq = pci_irq_line; + + if ((mac->flags & PCI_USES_IO) && + check_region (pci_ioaddr, mac->io_size)) + continue; + + pcibios_read_config_word(pci_bus, pci_device_fn, + PCI_COMMAND, &pci_command); + + { + u8 lat; + + pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_LATENCY_TIMER, &lat); + if (lat < 16) { + printk("PCI: Increasing latency timer of device %02x:%02x to 64\n", + pci_bus, pci_device_fn); + pcibios_write_config_byte(pci_bus, pci_device_fn, PCI_LATENCY_TIMER, 64); + } + } + net_dev = mac->probe (mac, ioaddr, irq, pci_index, pci_device_fn, pci_bus, net_dev); + if (net_dev != NULL) + { + found++; + } + net_dev = NULL; + } + } + return found ? 0 : -ENODEV; + +} + +/* older SiS900 and friends, use EEPROM to store MAC address */ +static int +sis900_get_mac_addr(long ioaddr, struct device *net_dev) +{ + u16 signature; + int i; + + /* check to see if we have sane EEPROM */ + signature = (u16) read_eeprom(ioaddr, EEPROMSignature); + if (signature == 0xffff || signature == 0x0000) { + printk (KERN_INFO "%s: Error EERPOM read %x\n", + net_dev->name, signature); + return 0; + } + + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + return 1; +} + +/* SiS630E model, use APC CMOS RAM to store MAC address */ +static int sis630e_get_mac_addr(long ioaddr, int pci_index, struct device *net_dev) +{ + u8 reg; + int i; + u8 pci_bus, pci_dfn; + int not_found; + + not_found = pcibios_find_device(0x1039, 0x0008, + pci_index, + &pci_bus, + &pci_dfn); + if (not_found) { + printk("%s: Can not find ISA bridge\n", net_dev->name); + return 0; + } + pcibios_read_config_byte(pci_bus, pci_dfn, 0x48, ®); + pcibios_write_config_byte(pci_bus, pci_dfn, 0x48, reg | 0x40); + + for (i = 0; i < 6; i++) { + outb(0x09 + i, 0x70); + ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); + } + pcibios_write_config_byte(pci_bus, pci_dfn, 0x48, reg & ~0x40); + + return 1; +} + +/* 635 model : set Mac reload bit and get mac address from rfdr */ +static int sis635_get_mac_addr(struct device *net_dev) +{ + long ioaddr = net_dev->base_addr; + u32 rfcrSave; + u32 i; + + rfcrSave = inl(rfcr + ioaddr); + + outl(rfcrSave | RELOAD, ioaddr + cr); + outl(0, ioaddr + cr); + + /* disable packet filtering before setting filter */ + outl(rfcrSave & ~RFEN, rfcr + ioaddr); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + outl((i << RFADDR_shift), ioaddr + rfcr); + *( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr); + } + + /* enable packet filitering */ + outl(rfcrSave | RFEN, rfcr + ioaddr); + + return 1; +} + + +/** + * sis962_get_mac_addr: - Get MAC address for SiS962 model + * @pci_dev: the sis900 pci device + * @net_dev: the net device to get address for + * + * SiS962 model, use EEPROM to store MAC address. And EEPROM is shared by + * LAN and 1394. When access EEPROM, send EEREQ signal to hardware first + * and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access + * by LAN, otherwise is not. After MAC address is read from EEPROM, send + * EEDONE signal to refuse EEPROM access by LAN. + * MAC address is read into @net_dev->dev_addr. + */ + +static int sis962_get_mac_addr(struct device *net_dev) +{ + long ioaddr = net_dev->base_addr; + long ee_addr = ioaddr + mear; + u32 waittime = 0; + int i; + + outl(EEREQ, ee_addr); + while(waittime < 2000) { + if(inl(ee_addr) & EEGNT) { + /* get MAC address from EEPROM */ + for (i = 0; i < 3; i++) + ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr); + outl(EEDONE, ee_addr); + return 1; + } else { + udelay(1); + waittime ++; + } + } + outl(EEDONE, ee_addr); + return 0; +} + +struct device * +sis900_mac_probe (struct mac_chip_info *mac, long ioaddr, int irq, int pci_index, + unsigned char pci_device_fn, unsigned char pci_bus, struct device * net_dev) +{ + struct sis900_private *sis_priv; + static int did_version = 0; + + u8 revision; + int i, ret = 0; + + if (did_version++ == 0) + printk(KERN_INFO "%s\n", version); + + if ((net_dev = init_etherdev(net_dev, 0)) == NULL) + return NULL; + + if ((net_dev->priv = kmalloc(sizeof(struct sis900_private), GFP_KERNEL)) == NULL) { + unregister_netdev(net_dev); + return NULL; + } + + sis_priv = net_dev->priv; + memset(sis_priv, 0, sizeof(struct sis900_private)); + + /* We do a request_region() to register /proc/ioports info. */ + request_region(ioaddr, mac->io_size, net_dev->name); + net_dev->base_addr = ioaddr; + net_dev->irq = irq; + + sis_priv->mac = mac; + sis_priv->pci_bus = pci_bus; + sis_priv->pci_device_fn = pci_device_fn; + sis_priv->pci_index = pci_index; + + pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &revision); + + if ( revision == SIS630E_900_REV ) + ret = sis630e_get_mac_addr(ioaddr, pci_index, net_dev); + else if ((revision > 0x81) && (revision <= 0x90)) + ret = sis635_get_mac_addr(net_dev); + else if (revision == SIS962_900_REV) + ret = sis962_get_mac_addr(net_dev); + else + ret = sis900_get_mac_addr(ioaddr, net_dev); + + if (ret == 0) { + unregister_netdev(net_dev); + return NULL; + } + + /* print some information about our NIC */ + printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name, mac->name, + ioaddr, irq); + for (i = 0; i < 5; i++) + printk("%2.2x:", (u8)net_dev->dev_addr[i]); + printk("%2.2x.\n", net_dev->dev_addr[i]); + + /* 630ET : set the mii access mode as software-mode */ + if (revision == SIS630ET_900_REV) + outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr); + + /* probe for mii transceiver */ + if (sis900_mii_probe(pci_bus, pci_device_fn, net_dev) == 0) { + unregister_netdev(net_dev); + kfree(sis_priv); + release_region(ioaddr, mac->io_size); + return NULL; + } + + sis_priv->next_module = root_sis900_dev; + root_sis900_dev = net_dev; + + /* The SiS900-specific entries in the device structure. */ + net_dev->open = &sis900_open; + net_dev->hard_start_xmit = &sis900_start_xmit; + net_dev->stop = &sis900_close; + net_dev->get_stats = &sis900_get_stats; + net_dev->set_multicast_list = &set_rx_mode; + net_dev->do_ioctl = &mii_ioctl; + + return net_dev; +} + +/* sis900_mii_probe: - Probe MII PHY for sis900 */ +static int sis900_mii_probe (unsigned char pci_bus, unsigned char pci_device_fn, struct device * net_dev) +{ + struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv; + u16 poll_bit = MII_STAT_LINK, status = 0; + unsigned int timeout = jiffies + 5 * HZ; + int phy_addr; + u8 revision; + + sis_priv->mii = NULL; + + /* search for total of 32 possible mii phy addresses */ + for (phy_addr = 0; phy_addr < 32; phy_addr++) { + struct mii_phy * mii_phy = NULL; + u16 mii_status; + int i; + + for(i=0; i<2; i++) + mii_status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (mii_status == 0xffff || mii_status == 0x0000) + /* the mii is not accessable, try next one */ + continue; + + if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) { + printk(KERN_INFO "Cannot allocate mem for struct mii_phy\n"); + return 0; + } + + mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0); + mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1); + mii_phy->phy_addr = phy_addr; + mii_phy->status = mii_status; + mii_phy->next = sis_priv->mii; + sis_priv->mii = mii_phy; + sis_priv->first_mii = mii_phy; + + for (i=0; mii_chip_table[i].phy_id1; i++) + if ( ( mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) && + ( (mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1 )){ + + mii_phy->phy_types = mii_chip_table[i].phy_types; + if(mii_chip_table[i].phy_types == MIX) + mii_phy->phy_types = + (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX))?LAN:HOME; + printk(KERN_INFO "%s: %s transceiver found at address %d.\n", + net_dev->name, mii_chip_table[i].name, phy_addr); + break; + } + + if( !mii_chip_table[i].phy_id1 ) + printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", + net_dev->name, phy_addr); + } + + if (sis_priv->mii == NULL) { + printk(KERN_INFO "%s: No MII transceivers found!\n", + net_dev->name); + return 0; + } + + /* Slect Default PHY to put in sis_priv->mii & sis_priv->cur_phy */ + sis_priv->mii = NULL; + sis900_default_phy( net_dev ); + + /* Reset PHY if default PHY is internal sis900 */ + if( (sis_priv->mii->phy_id0 == 0x001D) && + ( (sis_priv->mii->phy_id1&0xFFF0) == 0x8000) ) + status = sis900_reset_phy( net_dev, sis_priv->cur_phy ); + + /* workaround for ICS1893 PHY */ + if ((sis_priv->mii->phy_id0 == 0x0015) && + ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440)) + mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200); + + if( status & MII_STAT_LINK ){ + while (poll_bit) + { + poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit); + if (jiffies >= timeout) + { + printk(KERN_WARNING "%s: reset phy and link down now\n", net_dev->name); + return -ETIME; + } + } + } + + pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &revision); + if (revision == SIS630E_900_REV) { + /* SiS 630E has some bugs on default value of PHY registers */ + mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22); + mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00); + mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0); + //mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000); + } + + if (sis_priv->mii->status & MII_STAT_LINK) + sis_priv->LinkOn = TRUE; + else + sis_priv->LinkOn = FALSE; + + return 1; +} + + +/* sis900_default_phy : Select one default PHY for sis900 mac */ +static u16 sis900_default_phy(struct device * net_dev) +{ + struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv; + struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL; + u16 status; + + for( phy=sis_priv->first_mii; phy; phy=phy->next ){ + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + /* Link ON & Not select deafalut PHY */ + if ( (status & MII_STAT_LINK) && !(default_phy) ) + default_phy = phy; + else{ + status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL); + mdio_write(net_dev, phy->phy_addr, MII_CONTROL, + status | MII_CNTL_AUTO | MII_CNTL_ISOLATE); + if( phy->phy_types == HOME ) + phy_home = phy; + } + } + + if( (!default_phy) && phy_home ) + default_phy = phy_home; + else if(!default_phy) + default_phy = sis_priv->first_mii; + + if( sis_priv->mii != default_phy ){ + sis_priv->mii = default_phy; + sis_priv->cur_phy = default_phy->phy_addr; + printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", net_dev->name,sis_priv->cur_phy); + } + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); + status &= (~MII_CNTL_ISOLATE); + + mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + return status; +} + + +/* sis900_set_capability : set the media capability of network adapter */ +static void sis900_set_capability( struct device *net_dev , struct mii_phy *phy ) +{ + u16 cap; + u16 status; + + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); + + cap = MII_NWAY_CSMA_CD | + ((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) | + ((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) | + ((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)| + ((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0); + + mdio_write( net_dev, phy->phy_addr, MII_ANADV, cap ); +} + + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay() inl(ee_addr) + +/* Read Serial EEPROM through EEPROM Access Register, Note that location is + in word (16 bits) unit */ +static u16 read_eeprom(long ioaddr, int location) +{ + int i; + u16 retval = 0; + long ee_addr = ioaddr + mear; + u32 read_cmd = location | EEread; + + outl(0, ee_addr); + eeprom_delay(); + outl(EECS, ee_addr); + eeprom_delay(); + + /* Shift the read command (9) bits out. */ + for (i = 8; i >= 0; i--) { + u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS; + outl(dataval, ee_addr); + eeprom_delay(); + outl(dataval | EECLK, ee_addr); + eeprom_delay(); + } + outb(EECS, ee_addr); + eeprom_delay(); + + /* read the 16-bits data in */ + for (i = 16; i > 0; i--) { + outl(EECS, ee_addr); + eeprom_delay(); + outl(EECS | EECLK, ee_addr); + eeprom_delay(); + retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0); + eeprom_delay(); + } + + /* Terminate the EEPROM access. */ + outl(0, ee_addr); + eeprom_delay(); +// outl(EECLK, ee_addr); + + return (retval); +} + +/* Read and write the MII management registers using software-generated + serial MDIO protocol. Note that the command bits and data bits are + send out seperately */ +#define mdio_delay() inl(mdio_addr) + +static void mdio_idle(long mdio_addr) +{ + outl(MDIO | MDDIR, mdio_addr); + mdio_delay(); + outl(MDIO | MDDIR | MDC, mdio_addr); +} + +/* Syncronize the MII management interface by shifting 32 one bits out. */ +static void mdio_reset(long mdio_addr) +{ + int i; + + for (i = 31; i >= 0; i--) { + outl(MDDIR | MDIO, mdio_addr); + mdio_delay(); + outl(MDDIR | MDIO | MDC, mdio_addr); + mdio_delay(); + } + return; +} + +static u16 mdio_read(struct device *net_dev, int phy_id, int location) +{ + long mdio_addr = net_dev->base_addr + mear; + int mii_cmd = MIIread|(phy_id<= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + outl(dataval, mdio_addr); + mdio_delay(); + outl(dataval | MDC, mdio_addr); + mdio_delay(); + } + + /* Read the 16 data bits. */ + for (i = 16; i > 0; i--) { + outl(0, mdio_addr); + mdio_delay(); + retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0); + outl(MDC, mdio_addr); + mdio_delay(); + } + outl(0x00, mdio_addr); + + return retval; +} + +static void mdio_write(struct device *net_dev, int phy_id, int location, int value) +{ + long mdio_addr = net_dev->base_addr + mear; + int mii_cmd = MIIwrite|(phy_id<= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR; + outb(dataval, mdio_addr); + mdio_delay(); + outb(dataval | MDC, mdio_addr); + mdio_delay(); + } + mdio_delay(); + + /* Shift the value bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR; + outl(dataval, mdio_addr); + mdio_delay(); + outl(dataval | MDC, mdio_addr); + mdio_delay(); + } + mdio_delay(); + + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + outb(0, mdio_addr); + mdio_delay(); + outb(MDC, mdio_addr); + mdio_delay(); + } + outl(0x00, mdio_addr); + + return; +} + +static u16 sis900_reset_phy(struct device *net_dev, int phy_addr) +{ + int i = 0; + u16 status; + + while (i++ < 2) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET ); + + return status; +} + +static int +sis900_open(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + u8 revision; + + /* Soft reset the chip. */ + sis900_reset(net_dev); + + /* Equalizer workaroung Rule */ + pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision); + sis630_set_eq(net_dev, revision); + + if (request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ, net_dev->name, net_dev)) { + return -EAGAIN; + } + + MOD_INC_USE_COUNT; + + sis900_init_rxfilter(net_dev); + + sis900_init_tx_ring(net_dev); + sis900_init_rx_ring(net_dev); + + set_rx_mode(net_dev); + + net_dev->tbusy = 0; + net_dev->interrupt = 0; + net_dev->start = 1; + + /* Workaround for EDB */ + sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + + /* Enable all known interrupts by setting the interrupt mask. */ + outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); + outl(RxENA | inl(ioaddr + cr), ioaddr + cr); + outl(IE, ioaddr + ier); + + sis900_check_mode(net_dev, sis_priv->mii); + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + init_timer(&sis_priv->timer); + sis_priv->timer.expires = jiffies + HZ; + sis_priv->timer.data = (unsigned long)net_dev; + sis_priv->timer.function = &sis900_timer; + add_timer(&sis_priv->timer); + + return 0; +} + +/* set receive filter address to our MAC address */ +static void +sis900_init_rxfilter (struct device * net_dev) +{ + long ioaddr = net_dev->base_addr; + u32 rfcrSave; + u32 i; + + rfcrSave = inl(rfcr + ioaddr); + + /* disable packet filtering before setting filter */ + outl(rfcrSave & ~RFEN, rfcr + ioaddr); + + /* load MAC addr to filter data register */ + for (i = 0 ; i < 3 ; i++) { + u32 w; + + w = (u32) *((u16 *)(net_dev->dev_addr)+i); + outl((i << RFADDR_shift), ioaddr + rfcr); + outl(w, ioaddr + rfdr); + + if (sis900_debug > 2) { + printk(KERN_INFO "%s: Receive Filter Addrss[%d]=%x\n", + net_dev->name, i, inl(ioaddr + rfdr)); + } + } + + /* enable packet filitering */ + outl(rfcrSave | RFEN, rfcr + ioaddr); +} + +/* Initialize the Tx ring. */ +static void +sis900_init_tx_ring(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + int i; + + sis_priv->tx_full = 0; + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + + for (i = 0; i < NUM_TX_DESC; i++) { + sis_priv->tx_skbuff[i] = NULL; + + sis_priv->tx_ring[i].link = (u32) virt_to_bus(&sis_priv->tx_ring[i+1]); + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + } + sis_priv->tx_ring[i-1].link = (u32) virt_to_bus(&sis_priv->tx_ring[0]); + + /* load Transmit Descriptor Register */ + outl(virt_to_bus(&sis_priv->tx_ring[0]), ioaddr + txdp); + if (sis900_debug > 2) + printk(KERN_INFO "%s: TX descriptor register loaded with: %8.8x\n", + net_dev->name, inl(ioaddr + txdp)); +} + +/* Initialize the Rx descriptor ring, pre-allocate recevie buffers */ +static void +sis900_init_rx_ring(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + int i; + + sis_priv->cur_rx = 0; + sis_priv->dirty_rx = 0; + + /* init RX descriptor */ + for (i = 0; i < NUM_RX_DESC; i++) { + sis_priv->rx_skbuff[i] = NULL; + + sis_priv->rx_ring[i].link = (u32) virt_to_bus(&sis_priv->rx_ring[i+1]); + sis_priv->rx_ring[i].cmdsts = 0; + sis_priv->rx_ring[i].bufptr = 0; + } + sis_priv->rx_ring[i-1].link = (u32) virt_to_bus(&sis_priv->rx_ring[0]); + + /* allocate sock buffers */ + for (i = 0; i < NUM_RX_DESC; i++) { + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a "hole" + on the buffer ring, it is not clear how the + hardware will react to this kind of degenerated + buffer */ + break; + } + skb->dev = net_dev; + sis_priv->rx_skbuff[i] = skb; + sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[i].bufptr = virt_to_bus(skb->tail); + } + sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC); + + /* load Receive Descriptor Register */ + outl(virt_to_bus(&sis_priv->rx_ring[0]), ioaddr + rxdp); + if (sis900_debug > 2) + printk(KERN_INFO "%s: RX descriptor register loaded with: %8.8x\n", + net_dev->name, inl(ioaddr + rxdp)); +} + +/** + * sis630_set_eq: - set phy equalizer value for 630 LAN + * @net_dev: the net device to set equalizer value + * @revision: 630 LAN revision number + * + * 630E equalizer workaround rule(Cyrus Huang 08/15) + * PHY register 14h(Test) + * Bit 14: 0 -- Automatically dectect (default) + * 1 -- Manually set Equalizer filter + * Bit 13: 0 -- (Default) + * 1 -- Speed up convergence of equalizer setting + * Bit 9 : 0 -- (Default) + * 1 -- Disable Baseline Wander + * Bit 3~7 -- Equalizer filter setting + * Link ON: Set Bit 9, 13 to 1, Bit 14 to 0 + * Then calculate equalizer value + * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0 + * Link Off:Set Bit 13 to 1, Bit 14 to 0 + * Calculate Equalizer value: + * When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value. + * When the equalizer is stable, this value is not a fixed value. It will be within + * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9) + * 0 <= max <= 4 --> set equalizer to max + * 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min + * max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min + */ + +static void sis630_set_eq(struct device *net_dev, u8 revision) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + u16 reg14h, eq_value, max_value=0, min_value=0; + u8 host_bridge_rev; + int i, maxcount=10; + int not_found; + u8 pci_bus, pci_device_fn; + + if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630A_900_REV || revision == SIS630ET_900_REV) ) + return; + not_found = pcibios_find_device(SIS630_VENDOR_ID, SIS630_DEVICE_ID, + sis_priv->pci_index, + &pci_bus, + &pci_device_fn); + if (not_found) + pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &host_bridge_rev); + + if (sis_priv->LinkOn) { + reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (0x2200 | reg14h) & 0xBFFF); + for (i=0; i < maxcount; i++) { + eq_value=(0x00F8 & mdio_read(net_dev, sis_priv->cur_phy, MII_RESV)) >> 3; + if (i == 0) + max_value=min_value=eq_value; + max_value=(eq_value > max_value) ? eq_value : max_value; + min_value=(eq_value < min_value) ? eq_value : min_value; + } + /* 630E rule to determine the equalizer value */ + if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || + revision == SIS630ET_900_REV) { + if (max_value < 5) + eq_value=max_value; + else if (max_value >= 5 && max_value < 15) + eq_value=(max_value == min_value) ? max_value+2 : max_value+1; + else if (max_value >= 15) + eq_value=(max_value == min_value) ? max_value+6 : max_value+5; + } + /* 630B0&B1 rule to determine the equalizer value */ + if (revision == SIS630A_900_REV && + (host_bridge_rev == SIS630B0 || host_bridge_rev == SIS630B1)) { + if (max_value == 0) + eq_value=3; + else + eq_value=(max_value+min_value+1)/2; + } + /* write equalizer value and setting */ + reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + reg14h=(reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); + reg14h=(reg14h | 0x6000) & 0xFDFF; + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h); + } + else { + reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + if (revision == SIS630A_900_REV && + (host_bridge_rev == SIS630B0 || host_bridge_rev == SIS630B1)) + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2200) & 0xBFFF); + else + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2000) & 0xBFFF); + } + return; +} + + +/* on each timer ticks we check two things, Link Status (ON/OFF) and + Link Mode (10/100/Full/Half) +*/ +static void sis900_timer(unsigned long data) +{ + struct device *net_dev = (struct device *)data; + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + struct mii_phy *mii_phy = sis_priv->mii; + static int next_tick = 5*HZ; + u16 status; + u8 revision; + + if(!sis_priv->autong_complete){ + int speed, duplex = 0; + + sis900_read_mode(net_dev, &speed, &duplex); + if(duplex){ + sis900_set_mode(net_dev->base_addr, speed, duplex); + pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision); + sis630_set_eq(net_dev, revision); + } + + sis_priv->timer.expires = jiffies + HZ; + add_timer(&sis_priv->timer); + return; + } + + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS); + + /* Link OFF -> ON */ + if ( !sis_priv->LinkOn ) { +LookForLink: + /* Search for new PHY */ + status = sis900_default_phy( net_dev ); + mii_phy = sis_priv->mii; + + if( status & MII_STAT_LINK ){ + sis900_check_mode(net_dev, mii_phy); + sis_priv->LinkOn = TRUE; + } + } + /* Link ON -> OFF */ + else{ + if( !(status & MII_STAT_LINK) ){ + sis_priv->LinkOn = FALSE; + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + + /* Change mode issue */ + if( (mii_phy->phy_id0 == 0x001D) && + ( (mii_phy->phy_id1 & 0xFFF0) == 0x8000 )) + sis900_reset_phy( net_dev, sis_priv->cur_phy ); + + pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision); + sis630_set_eq(net_dev, revision); + + goto LookForLink; + } + } + + sis_priv->timer.expires = jiffies + next_tick; + add_timer(&sis_priv->timer); +} + +static void sis900_check_mode (struct device *net_dev, struct mii_phy *mii_phy) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + int speed, duplex; + + if( mii_phy->phy_types == LAN ){ + outl( ~EXD & inl( ioaddr + cfg ), ioaddr + cfg); + sis900_set_capability(net_dev , mii_phy); + sis900_auto_negotiate(net_dev, sis_priv->cur_phy); + }else{ + outl(EXD | inl( ioaddr + cfg ), ioaddr + cfg); + speed = HW_SPEED_HOME; + duplex = FDX_CAPABLE_HALF_SELECTED; + sis900_set_mode(net_dev->base_addr, speed, duplex); + sis_priv->autong_complete = 1; + } +} + +static void sis900_set_mode (long ioaddr, int speed, int duplex) +{ + u32 tx_flags = 0, rx_flags = 0; + + if( inl(ioaddr + cfg) & EDB_MASTER_EN ){ + tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_64 << RxMXDMA_shift; + } + else{ + tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift); + rx_flags = DMA_BURST_512 << RxMXDMA_shift; + } + + if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS ) { + rx_flags |= (RxDRNT_10 << RxDRNT_shift); + tx_flags |= (TxDRNT_10 << TxDRNT_shift); + } + else { + rx_flags |= (RxDRNT_100 << RxDRNT_shift); + tx_flags |= (TxDRNT_100 << TxDRNT_shift); + } + + if (duplex == FDX_CAPABLE_FULL_SELECTED) { + tx_flags |= (TxCSI | TxHBI); + rx_flags |= RxATX; + } + + outl (tx_flags, ioaddr + txcfg); + outl (rx_flags, ioaddr + rxcfg); +} + + +static void sis900_auto_negotiate(struct device *net_dev, int phy_addr) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + int i = 0; + u32 status; + + while (i++ < 2) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)){ + printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); + sis_priv->autong_complete = 1; + sis_priv->LinkOn = FALSE; + return; + } + + /* (Re)start AutoNegotiate */ + mdio_write(net_dev, phy_addr, MII_CONTROL, + MII_CNTL_AUTO | MII_CNTL_RST_AUTO); + sis_priv->autong_complete = 0; +} + + +static void sis900_read_mode(struct device *net_dev, int *speed, int *duplex) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + struct mii_phy *phy = sis_priv->mii; + int phy_addr = sis_priv->cur_phy; + u32 status; + u16 autoadv, autorec; + int i = 0; + + while (i++ < 2) + status = mdio_read(net_dev, phy_addr, MII_STATUS); + + if (!(status & MII_STAT_LINK)) return; + + /* AutoNegotiate completed */ + autoadv = mdio_read(net_dev, phy_addr, MII_ANADV); + autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR); + status = autoadv & autorec; + + *speed = HW_SPEED_10_MBPS; + *duplex = FDX_CAPABLE_HALF_SELECTED; + + if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX)) + *speed = HW_SPEED_100_MBPS; + if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX)) + *duplex = FDX_CAPABLE_FULL_SELECTED; + + sis_priv->autong_complete = 1; + + /* Workaround for Realtek RTL8201 PHY issue */ + if((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)){ + if(mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) + *duplex = FDX_CAPABLE_FULL_SELECTED; + if(mdio_read(net_dev, phy_addr, 0x0019) & 0x01) + *speed = HW_SPEED_100_MBPS; + } + + printk(KERN_INFO "%s: Media Link On %s %s-duplex \n", + net_dev->name, + *speed == HW_SPEED_100_MBPS ? + "100mbps" : "10mbps", + *duplex == FDX_CAPABLE_FULL_SELECTED ? + "full" : "half"); +} + + +static void sis900_tx_timeout(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + int i; + + printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n", + net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr)); + + /* Disable interrupts by clearing the interrupt mask. */ + outl(0x0000, ioaddr + imr); + + /* discard unsent packets, should this code section be protected by + cli(), sti() ?? */ + sis_priv->dirty_tx = sis_priv->cur_tx = 0; + for (i = 0; i < NUM_TX_DESC; i++) { + if (sis_priv->tx_skbuff[i] != NULL) { + dev_free_skb(sis_priv->tx_skbuff[i]); + sis_priv->tx_skbuff[i] = 0; + sis_priv->tx_ring[i].cmdsts = 0; + sis_priv->tx_ring[i].bufptr = 0; + sis_priv->stats.tx_dropped++; + } + } + net_dev->trans_start = jiffies; + net_dev->tbusy = sis_priv->tx_full = 0; + + /* FIXME: Should we restart the transmission thread here ?? */ + outl(TxENA | inl(ioaddr + cr), ioaddr + cr); + + /* Enable all known interrupts by setting the interrupt mask. */ + outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr); + return; +} + +static int +sis900_start_xmit(struct sk_buff *skb, struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + unsigned int entry; + + /* test tbusy to see if we have timeout situation then set it */ + if (test_and_set_bit(0, (void*)&net_dev->tbusy) != 0) { + if (jiffies - net_dev->trans_start > TX_TIMEOUT) + sis900_tx_timeout(net_dev); + return 1; + } + + /* Calculate the next Tx descriptor entry. */ + entry = sis_priv->cur_tx % NUM_TX_DESC; + sis_priv->tx_skbuff[entry] = skb; + + /* set the transmit buffer descriptor and enable Transmit State Machine */ + sis_priv->tx_ring[entry].bufptr = virt_to_bus(skb->data); + sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len); + outl(TxENA | inl(ioaddr + cr), ioaddr + cr); + + if (++sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC) { + /* Typical path, clear tbusy to indicate more + transmission is possible */ + clear_bit(0, (void*)&net_dev->tbusy); + } else { + /* no more transmit descriptor avaiable, tbusy remain set */ + sis_priv->tx_full = 1; + } + + net_dev->trans_start = jiffies; + + { + int i; + for (i = 0; i < 100000; i++); /* GRUIIIIIK */ + } + + if (sis900_debug > 3) + printk(KERN_INFO "%s: Queued Tx packet at %p size %d " + "to slot %d.\n", + net_dev->name, skb->data, (int)skb->len, entry); + + return 0; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static void sis900_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct device *net_dev = (struct device *)dev_instance; + int boguscnt = max_interrupt_work; + long ioaddr = net_dev->base_addr; + u32 status; + +#if defined(__i386__) + /* A lock to prevent simultaneous entry bug on Intel SMP machines. */ + if (test_and_set_bit(0, (void*)&net_dev->interrupt)) { + printk(KERN_INFO "%s: SMP simultaneous entry of " + "an interrupt handler.\n", net_dev->name); + net_dev->interrupt = 0; /* Avoid halting machine. */ + return; + } +#else + if (net_dev->interrupt) { + printk(KERN_INFO "%s: Re-entering the interrupt handler.\n", + net_dev->name); + return; + } + net_dev->interrupt = 1; +#endif + + do { + status = inl(ioaddr + isr); + + if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0) + /* nothing intresting happened */ + break; + + /* why dow't we break after Tx/Rx case ?? keyword: full-duplex */ + if (status & (RxORN | RxERR | RxOK)) + /* Rx interrupt */ + sis900_rx(net_dev); + + if (status & (TxURN | TxERR | TxIDLE)) + /* Tx interrupt */ + sis900_finish_xmit(net_dev); + + /* something strange happened !!! */ + if (status & HIBERR) { + printk(KERN_INFO "%s: Abnormal interrupt," + "status %#8.8x.\n", net_dev->name, status); + break; + } + if (--boguscnt < 0) { + printk(KERN_INFO "%s: Too much work at interrupt, " + "interrupt status = %#8.8x.\n", + net_dev->name, status); + break; + } + } while (1); + + if (sis900_debug > 4) + printk(KERN_INFO "%s: exiting interrupt, " + "interrupt status = 0x%#8.8x.\n", + net_dev->name, inl(ioaddr + isr)); + +#if defined(__i386__) + clear_bit(0, (void*)&net_dev->interrupt); +#else + net_dev->interrupt = 0; +#endif + return; +} + +/* Process receive interrupt events, put buffer to higher layer and refill buffer pool + Note: This fucntion is called by interrupt handler, don't do "too much" work here */ +static int sis900_rx(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + long ioaddr = net_dev->base_addr; + unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; + u32 rx_status = sis_priv->rx_ring[entry].cmdsts; + + if (sis900_debug > 4) + printk(KERN_INFO "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " + "status:0x%8.8x\n", + sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); + + while (rx_status & OWN) { + unsigned int rx_size; + + rx_size = (rx_status & DSIZE) - CRC_SIZE; + + if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { + /* corrupted packet received */ + if (sis900_debug > 4) + printk(KERN_INFO "%s: Corrupted packet " + "received, buffer status = 0x%8.8x.\n", + net_dev->name, rx_status); + sis_priv->stats.rx_errors++; + if (rx_status & OVERRUN) + sis_priv->stats.rx_over_errors++; + if (rx_status & (TOOLONG|RUNT)) + sis_priv->stats.rx_length_errors++; + if (rx_status & (RXISERR | FAERR)) + sis_priv->stats.rx_frame_errors++; + if (rx_status & CRCERR) + sis_priv->stats.rx_crc_errors++; + /* reset buffer descriptor state */ + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + } else { + struct sk_buff * skb; + + /* This situation should never happen, but due to + some unknow bugs, it is possible that + we are working on NULL sk_buff :-( */ + if (sis_priv->rx_skbuff[entry] == NULL) { + printk(KERN_INFO "%s: NULL pointer " + "encountered in Rx ring, skipping\n", + net_dev->name); + break; + } + + /* gvie the socket buffer to upper layers */ + skb = sis_priv->rx_skbuff[entry]; + skb_put(skb, rx_size); + skb->protocol = eth_type_trans(skb, net_dev); + netif_rx(skb); + + /* some network statistics */ + if ((rx_status & BCAST) == MCAST) + sis_priv->stats.multicast++; + net_dev->last_rx = jiffies; + /* sis_priv->stats.rx_bytes += rx_size;*/ + sis_priv->stats.rx_packets++; + + /* refill the Rx buffer, what if there is not enought memory for + new socket buffer ?? */ + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a "hole" + on the buffer ring, it is not clear how the + hardware will react to this kind of degenerated + buffer */ + printk(KERN_INFO "%s: Memory squeeze," + "deferring packet.\n", + net_dev->name); + sis_priv->rx_skbuff[entry] = NULL; + /* reset buffer descriptor state */ + sis_priv->rx_ring[entry].cmdsts = 0; + sis_priv->rx_ring[entry].bufptr = 0; + sis_priv->stats.rx_dropped++; + break; + } + skb->dev = net_dev; + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = virt_to_bus(skb->tail); + sis_priv->dirty_rx++; + } + sis_priv->cur_rx++; + entry = sis_priv->cur_rx % NUM_RX_DESC; + rx_status = sis_priv->rx_ring[entry].cmdsts; + } // while + + /* refill the Rx buffer, what if the rate of refilling is slower than + consuming ?? */ + for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) { + struct sk_buff *skb; + + entry = sis_priv->dirty_rx % NUM_RX_DESC; + + if (sis_priv->rx_skbuff[entry] == NULL) { + if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { + /* not enough memory for skbuff, this makes a "hole" + on the buffer ring, it is not clear how the + hardware will react to this kind of degenerated + buffer */ + printk(KERN_INFO "%s: Memory squeeze," + "deferring packet.\n", + net_dev->name); + sis_priv->stats.rx_dropped++; + break; + } + skb->dev = net_dev; + sis_priv->rx_skbuff[entry] = skb; + sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE; + sis_priv->rx_ring[entry].bufptr = virt_to_bus(skb->tail); + } + } + + /* re-enable the potentially idle receive state matchine */ + outl(RxENA | inl(ioaddr + cr), ioaddr + cr ); + + return 0; +} + +/* finish up transmission of packets, check for error condition and free skbuff etc. + Note: This fucntion is called by interrupt handler, don't do "too much" work here */ +static void sis900_finish_xmit (struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + + for (; sis_priv->dirty_tx < sis_priv->cur_tx; sis_priv->dirty_tx++) { + unsigned int entry; + u32 tx_status; + + entry = sis_priv->dirty_tx % NUM_TX_DESC; + tx_status = sis_priv->tx_ring[entry].cmdsts; + + if (tx_status & OWN) { + /* The packet is not transmitted yet (owned by hardware) ! + Note: the interrupt is generated only when Tx Machine + is idle, so this is an almost impossible case */ + break; + } + + if (tx_status & (ABORT | UNDERRUN | OWCOLL)) { + /* packet unsuccessfully transmitted */ + if (sis900_debug > 4) + printk(KERN_INFO "%s: Transmit " + "error, Tx status %8.8x.\n", + net_dev->name, tx_status); + sis_priv->stats.tx_errors++; + if (tx_status & UNDERRUN) + sis_priv->stats.tx_fifo_errors++; + if (tx_status & ABORT) + sis_priv->stats.tx_aborted_errors++; + if (tx_status & NOCARRIER) + sis_priv->stats.tx_carrier_errors++; + if (tx_status & OWCOLL) + sis_priv->stats.tx_window_errors++; + } else { + /* packet successfully transmitted */ + sis_priv->stats.collisions += (tx_status & COLCNT) >> 16; + /* sis_priv->stats.tx_bytes += tx_status & DSIZE;*/ + sis_priv->stats.tx_packets++; + } + /* Free the original skb. */ + dev_free_skb(sis_priv->tx_skbuff[entry]); + sis_priv->tx_skbuff[entry] = NULL; + sis_priv->tx_ring[entry].bufptr = 0; + sis_priv->tx_ring[entry].cmdsts = 0; + } + + if (sis_priv->tx_full && net_dev->tbusy && + sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) { + /* The ring is no longer full, clear tbusy, tx_full and + schedule more transmission by marking NET_BH */ + sis_priv->tx_full = 0; + clear_bit(0, (void *)&net_dev->tbusy); + mark_bh(NET_BH); + } +} + +static int +sis900_close(struct device *net_dev) +{ + long ioaddr = net_dev->base_addr; + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + int i; + + net_dev->start = 0; + net_dev->tbusy = 1; + + /* Disable interrupts by clearing the interrupt mask. */ + outl(0x0000, ioaddr + imr); + outl(0x0000, ioaddr + ier); + + /* Stop the chip's Tx and Rx Status Machine */ + outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); + + del_timer(&sis_priv->timer); + + free_irq(net_dev->irq, net_dev); + + /* Free Tx and RX skbuff */ + for (i = 0; i < NUM_RX_DESC; i++) { + if (sis_priv->rx_skbuff[i] != NULL) + dev_free_skb(sis_priv->rx_skbuff[i]); + sis_priv->rx_skbuff[i] = 0; + } + for (i = 0; i < NUM_TX_DESC; i++) { + if (sis_priv->tx_skbuff[i] != NULL) + dev_free_skb(sis_priv->tx_skbuff[i]); + sis_priv->tx_skbuff[i] = 0; + } + + /* Green! Put the chip in low-power mode. */ + + MOD_DEC_USE_COUNT; + + return 0; +} + +static int mii_ioctl(struct device *net_dev, struct ifreq *rq, int cmd) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + u16 *data = (u16 *)&rq->ifr_data; + + switch(cmd) { + case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ + data[0] = sis_priv->mii->phy_addr; + /* Fall Through */ + case SIOCDEVPRIVATE+1: /* Read the specified MII register. */ + data[3] = mdio_read(net_dev, data[0] & 0x1f, data[1] & 0x1f); + return 0; + case SIOCDEVPRIVATE+2: /* Write the specified MII register */ + if (!suser()) + return -EPERM; + mdio_write(net_dev, data[0] & 0x1f, data[1] & 0x1f, data[2]); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static struct enet_statistics * +sis900_get_stats(struct device *net_dev) +{ + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + + return &sis_priv->stats; +} + + +/* SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast + * hash table, which makes this function a little bit different from other drivers + * SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits + * multicast hash table. + */ +static u16 sis900_compute_hashtable_index(u8 *addr, u8 revision) +{ + +/* what is the correct value of the POLYNOMIAL ?? + Donald Becker use 0x04C11DB7U + Joseph Zbiciak im14u2c@primenet.com gives me the + correct answer, thank you Joe !! */ +#define POLYNOMIAL 0x04C11DB7L + u32 crc = 0xffffffff, msb; + int i, j; + u32 byte; + + for (i = 0; i < 6; i++) { + byte = *addr++; + for (j = 0; j < 8; j++) { + msb = crc >> 31; + crc <<= 1; + if (msb ^ (byte & 1)) { + crc ^= POLYNOMIAL; + } + byte >>= 1; + } + } + + /* leave 8 or 7 most siginifant bits */ + if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV)) + return ((int)(crc >> 24)); + else + return ((int)(crc >> 25)); +} + +static void set_rx_mode(struct device *net_dev) +{ + long ioaddr = net_dev->base_addr; + struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv; + u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */ + int i, table_entries; + u32 rx_mode; + u8 revision; + + /* 635 Hash Table entires = 256(2^16) */ + pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision); + if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV)) + table_entries = 16; + else + table_entries = 8; + + if (net_dev->flags & IFF_PROMISC) { + /* Accept any kinds of packets */ + rx_mode = RFPromiscuous; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else if ((net_dev->mc_count > multicast_filter_limit) || + (net_dev->flags & IFF_ALLMULTI)) { + /* too many multicast addresses or accept all multicast packets */ + rx_mode = RFAAB | RFAAM; + for (i = 0; i < table_entries; i++) + mc_filter[i] = 0xffff; + } else { + /* Accept Broadcast packets, destination addresses match our MAC address, + use Receive Filter to reject unwanted MCAST packets */ + struct dev_mc_list *mclist; + rx_mode = RFAAB; + for (i = 0, mclist = net_dev->mc_list; mclist && i < net_dev->mc_count; + i++, mclist = mclist->next) + set_bit(sis900_compute_hashtable_index(mclist->dmi_addr, revision), + mc_filter); + } + + /* update Multicast Hash Table in Receive Filter */ + for (i = 0; i < table_entries; i++) { + /* why plus 0x04 ??, That makes the correct value for hash table. */ + outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr); + outl(mc_filter[i], ioaddr + rfdr); + } + + outl(RFEN | rx_mode, ioaddr + rfcr); + + /* sis900 is capatable of looping back packet at MAC level for debugging purpose */ + if (net_dev->flags & IFF_LOOPBACK) { + u32 cr_saved; + /* We must disable Tx/Rx before setting loopback mode */ + cr_saved = inl(ioaddr + cr); + outl(cr_saved | TxDIS | RxDIS, ioaddr + cr); + /* enable loopback */ + outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg); + outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg); + /* restore cr */ + outl(cr_saved, ioaddr + cr); + } + + return; +} + +static void sis900_reset(struct device *net_dev) +{ + long ioaddr = net_dev->base_addr; + struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv; + int i = 0; + u8 revision; + u32 status = TxRCMP | RxRCMP; + + outl(0, ioaddr + ier); + outl(0, ioaddr + imr); + outl(0, ioaddr + rfcr); + + outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr); + + /* Check that the chip has finished the reset. */ + while (status && (i++ < 1000)) { + status ^= (inl(isr + ioaddr) & status); + } + + pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision); + if( (revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV) ) + outl(PESEL | RND_CNT, ioaddr + cfg); + else + outl(PESEL, ioaddr + cfg); +} + +#ifdef MODULE +int init_module(void) +{ + return sis900_probe(NULL); +} + +void +cleanup_module(void) +{ + /* No need to check MOD_IN_USE, as sys_delete_module() checks. */ + while (root_sis900_dev) { + struct sis900_private *sis_priv = + (struct sis900_private *)root_sis900_dev->priv; + struct device *next_dev = sis_priv->next_module; + struct mii_phy *phy = NULL; + + while(sis_priv->first_mii){ + phy = sis_priv->first_mii; + sis_priv->first_mii = phy->next; + kfree(phy); + } + + unregister_netdev(root_sis900_dev); + release_region(root_sis900_dev->base_addr, + sis_priv->mac->io_size); + kfree(sis_priv); + kfree(root_sis900_dev); + + root_sis900_dev = next_dev; + } +} + +#endif /* MODULE */ Index: linux/src/drivers/net/sis900.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux/src/drivers/net/sis900.h 2007-04-05 07:31:00.000000000 +0300 @@ -0,0 +1,284 @@ +/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900 + * Copyright 1999 Silicon Integrated System Corporation + * References: + * SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support, + * preliminary Rev. 1.0 Jan. 14, 1998 + * SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support, + * preliminary Rev. 1.0 Nov. 10, 1998 + * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, + * preliminary Rev. 1.0 Jan. 18, 1998 + * http://www.sis.com.tw/support/databook.htm + */ + +/* MAC operationl registers of SiS 7016 and SiS 900 ehternet controller */ +/* The I/O extent, SiS 900 needs 256 bytes of io address */ +#define SIS900_TOTAL_SIZE 0x100 + +/* Symbolic offsets to registers. */ +enum sis900_registers { + cr=0x0, //Command Register + cfg=0x4, //Configuration Register + mear=0x8, //EEPROM Access Register + ptscr=0xc, //PCI Test Control Register + isr=0x10, //Interrupt Status Register + imr=0x14, //Interrupt Mask Register + ier=0x18, //Interrupt Enable Register + epar=0x18, //Enhanced PHY Access Register + txdp=0x20, //Transmit Descriptor Pointer Register + txcfg=0x24, //Transmit Configuration Register + rxdp=0x30, //Receive Descriptor Pointer Register + rxcfg=0x34, //Receive Configuration Register + flctrl=0x38, //Flow Control Register + rxlen=0x3c, //Receive Packet Length Register + rfcr=0x48, //Receive Filter Control Register + rfdr=0x4C, //Receive Filter Data Register + pmctrl=0xB0, //Power Management Control Register + pmer=0xB4 //Power Management Wake-up Event Register +}; + +/* Symbolic names for bits in various registers */ +enum sis900_command_register_bits { + RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */ + RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020, + TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004, + TxDIS = 0x00000002, TxENA = 0x00000001 +}; + +enum sis900_configuration_register_bits { + DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080, + SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010, + PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001, + /* 635 & 900B Specific */ + RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200, + EDB_MASTER_EN = 0x00002000 +}; + +enum sis900_eeprom_access_reigster_bits { + MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */ + EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002, + EEDI = 0x00000001 +}; + +enum sis900_interrupt_register_bits { + WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000, + TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000, + SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000, + RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000, + MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200, + TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040, + RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008, + RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001 +}; + +enum sis900_interrupt_enable_reigster_bits { + IE = 0x00000001 +}; + +/* maximum dma burst fro transmission and receive*/ +#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */ +#define TxMXDMA_shift 20 +#define RxMXDMA_shift 20 + +enum sis900_tx_rx_dma{ + DMA_BURST_512 = 0, DMA_BURST_64 = 5 +}; + +/* transmit FIFO threshholds */ +#define TX_FILL_THRESH 16 /* 1/4 FIFO size */ +#define TxFILLT_shift 8 +#define TxDRNT_shift 0 +#define TxDRNT_100 48 /* 3/4 FIFO size */ +#define TxDRNT_10 16 /* 1/2 FIFO size */ + +enum sis900_transmit_config_register_bits { + TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000, + TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00, + TxDRNT = 0x0000003F +}; + +/* recevie FIFO thresholds */ +#define RxDRNT_shift 1 +#define RxDRNT_100 16 /* 1/2 FIFO size */ +#define RxDRNT_10 24 /* 3/4 FIFO size */ + +enum sis900_reveive_config_register_bits { + RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000, + RxAJAB = 0x08000000, RxDRNT = 0x0000007F +}; + +#define RFAA_shift 28 +#define RFADDR_shift 16 + +enum sis900_receive_filter_control_register_bits { + RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000, + RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP) +}; + +enum sis900_reveive_filter_data_mask { + RFDAT = 0x0000FFFF +}; + +/* EEPROM Addresses */ +enum sis900_eeprom_address { + EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03, + EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b +}; + +/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */ +enum sis900_eeprom_command { + EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0, + EEwriteEnable = 0x0130, EEwriteDisable = 0x0100, + EEeraseAll = 0x0120, EEwriteAll = 0x0110, + EEaddrMask = 0x013F, EEcmdShift = 16 +}; + +/* For SiS962, request the eeprom software access */ +enum sis962_eeprom_command { + EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100 +}; + +/* Manamgement Data I/O (mdio) frame */ +#define MIIread 0x6000 +#define MIIwrite 0x5002 +#define MIIpmdShift 7 +#define MIIregShift 2 +#define MIIcmdLen 16 +#define MIIcmdShift 16 + +/* Buffer Descriptor Status*/ +enum sis900_buffer_status { + OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000, + SUPCRC = 0x10000000, INCCRC = 0x10000000, + OK = 0x08000000, DSIZE = 0x00000FFF +}; +/* Status for TX Buffers */ +enum sis900_tx_buffer_status { + ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000, + DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000, + EXCCOLL = 0x00100000, COLCNT = 0x000F0000 +}; + +enum sis900_rx_bufer_status { + OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000, + MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000, + RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000, + FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000 +}; + +/* MII register offsets */ +enum mii_registers { + MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002, + MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005, + MII_ANEXT = 0x0006 +}; + +/* mii registers specific to SiS 900 */ +enum sis_mii_registers { + MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012, + MII_MASK = 0x0013, MII_RESV = 0x0014 +}; + +/* mii registers specific to ICS 1893 */ +enum ics_mii_registers { + MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012, + MII_EXTCTRL2 = 0x0013 +}; + +/* mii registers specific to AMD 79C901 */ +enum amd_mii_registers { + MII_STATUS_SUMMARY = 0x0018 +}; + +/* MII Control register bit definitions. */ +enum mii_control_register_bits { + MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200, + MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800, + MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000, + MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000 +}; + +/* MII Status register bit */ +enum mii_status_register_bits { + MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002, + MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008, + MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020, + MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000, + MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000, + MII_STAT_CAN_T4 = 0x8000 +}; + +#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ +#define MII_ID1_MODEL 0x03F0 /* model number */ +#define MII_ID1_REV 0x000F /* model number */ + +/* MII NWAY Register Bits ... + valid for the ANAR (Auto-Negotiation Advertisement) and + ANLPAR (Auto-Negotiation Link Partner) registers */ +enum mii_nway_register_bits { + MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001, + MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040, + MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100, + MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400, + MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000, + MII_NWAY_NP = 0x8000 +}; + +enum mii_stsout_register_bits { + MII_STSOUT_LINK_FAIL = 0x4000, + MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040 +}; + +enum mii_stsics_register_bits { + MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000, + MII_STSICS_LINKSTS = 0x0001 +}; + +enum mii_stssum_register_bits { + MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004, + MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001 +}; + +enum sis900_revision_id { + SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81, + SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83, + SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90, + SIS962_900_REV = 0X91, SIS900B_900_REV = 0x03 +}; + +enum sis630_revision_id { + SIS630A0 = 0x00, SIS630A1 = 0x01, + SIS630B0 = 0x10, SIS630B1 = 0x11 +}; + +#define FDX_CAPABLE_DUPLEX_UNKNOWN 0 +#define FDX_CAPABLE_HALF_SELECTED 1 +#define FDX_CAPABLE_FULL_SELECTED 2 + +#define HW_SPEED_UNCONFIG 0 +#define HW_SPEED_HOME 1 +#define HW_SPEED_10_MBPS 10 +#define HW_SPEED_100_MBPS 100 +#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS) + +#define CRC_SIZE 4 +#define MAC_HEADER_SIZE 14 + +#define TX_BUF_SIZE 1536 +#define RX_BUF_SIZE 1536 + +#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */ +#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */ + +#define TRUE 1 +#define FALSE 0 + +/* PCI stuff, should be move to pic.h */ +#define PCI_DEVICE_ID_SI_900 0x900 +#define PCI_DEVICE_ID_SI_7016 0x7016 +#define SIS630_VENDOR_ID 0x1039 +#define SIS630_DEVICE_ID 0x0630 + +/* ioctl for accessing MII transveiver */ +#define SIOCGMIIPHY (SIOCDEVPRIVATE) /* Get the PHY in use. */ +#define SIOCGMIIREG (SIOCDEVPRIVATE+1) /* Read a PHY register. */ +#define SIOCSMIIREG (SIOCDEVPRIVATE+2) /* Write a PHY register */ Index: linux/configfrag.ac =================================================================== --- linux/configfrag.ac.orig 2007-03-06 06:37:45.000000000 +0200 +++ linux/configfrag.ac 2007-04-05 07:31:00.000000000 +0300 @@ -420,6 +420,10 @@ AC_Linux_DRIVER([seeq8005], [Ethernet controller Seeq8005], [CONFIG_SEEQ8005], [net]) +AC_Linux_DRIVER([sis900], + [Ethernet controller SiS 900], + [CONFIG_SIS900], + [net]) AC_Linux_DRIVER([sk_g16], [Ethernet controller Schneider & Koch G16], [CONFIG_SK_G16], Index: linux/Makefrag.am =================================================================== --- linux/Makefrag.am.orig 2007-03-06 06:37:45.000000000 +0200 +++ linux/Makefrag.am 2007-04-05 07:31:00.000000000 +0300 @@ -526,6 +526,11 @@ liblinux_a_SOURCES += \ linux/src/drivers/net/seeq8005.h endif +if device_driver_sis900 +liblinux_a_SOURCES += \ + linux/src/drivers/net/sis900.c +endif + if device_driver_sk_g16 liblinux_a_SOURCES += \ linux/src/drivers/net/sk_g16.c \