From 09a7607c77a503c985790afd0c22b732f3550ffa Mon Sep 17 00:00:00 2001 From: "Michael I. Bushnell" Date: Tue, 7 Dec 1993 02:14:38 +0000 Subject: Initial revision --- hurd/process.defs | 384 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 384 insertions(+) create mode 100644 hurd/process.defs (limited to 'hurd') diff --git a/hurd/process.defs b/hurd/process.defs new file mode 100644 index 00000000..50daed00 --- /dev/null +++ b/hurd/process.defs @@ -0,0 +1,384 @@ +/* Definitions for process server interface + Copyright (C) 1992, 1993 Free Software Foundation + +This file is part of the GNU Hurd. + +The GNU Hurd is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +The GNU Hurd is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with the GNU Hurd; see the file COPYING. If not, write to +the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +subsystem process 24000; + +#include + +/* If any calls are added or deleted, modify process_reply.defs + to correspond. */ + +#ifdef PROCESS_IMPORTS +PROCESS_IMPORTS +#endif + +type reply_port_t = MACH_MSG_TYPE_MAKE_SEND_ONCE | polymorphic + ctype: mach_port_t; + +/*** Host management ***/ + +/* Set the hostid for the machine. This should be unique among all + machines. By convention, it is the "primary" IP address of the + machine. */ +routine proc_sethostid ( + process: process_t; + hostid: int); + +/* Get the host id. */ +routine proc_gethostid ( + process: process_t; + out hostid: int); + +/* Set the hostname for the machine. By convention this is the DNS + FQDN for the machine. */ +routine proc_sethostname ( + process: process_t; + hostname: string_t); + +/* Get the hostname. */ +routine proc_gethostname ( + process: process_t; + out hostname: string_t); + +/* Get the privileged host port and the device master port. */ +routine proc_getprivports ( + process: process_t; + out host_priv: host_priv_t; + out device_master: device_t); + +/* Return all the pids of all live processes. */ +routine proc_getallpids ( + process: process_t; + out pidarray: pidarray_t); + +/* Set the "standard exec data", used by programs that want predefined + values for exec. */ +routine proc_setexecdata ( + process: process_t; + ports: portarray_t; + ints: intarray_t); + +/* Get the standard exec data */ +routine proc_getexecdata ( + process: process_t; + out ports: portarray_t; + out ints: intarray_t); + +/* Request notification with exec_setexecdata on NOTIFY. */ +routine proc_execdata_notify ( + process: process_t; + notify: mach_port_send_t); + + +/*** Process creation and simple management. ***/ + +/* There is a 1-1 relationship between tasks and processes; to create + a new process, just create a new task and use proc_task2proc. */ + +/* Change the current authentication of the process. The user should + follow this call with a call to auth_user_authenticate. The + new_port passed back through the auth server will be + MACH_PORT_NULL. */ +simpleroutine proc_reauthenticate ( + process: process_t; + id: int); + +/* Declare that a task is a child of the caller. The task's state + will then inherit from the caller. This call can be made only once + per task. */ +routine proc_child ( + process: process_t; + child: task_t); + +/* Atomically change the message port of a process. */ +routine proc_setmsgport ( + process: process_t; + newmsgport: mach_port_t; + out oldmsgport: mach_port_move_send_t); + +/* Cause a task to take over the pid and all other state from an + existing task, and kill the old task with task_terminate. The + message port will be set to MACH_PORT_NULL. This is principally + used for doing exec's with the EXEC_NEWTASK bit set. The request + port assigned to NEWTASK does not change. The new task cannot have + had proc_child called on its behalf, it cannot have a pgrp, a session, + a login name set with proc_setlogin, it cannot have called proc_child, + and it cannot have a message port. */ +/* If this call is made for a process which is no longer alive or + does not exist, then newtask will be killed (and no error + is returned). */ +routine proc_reassign ( + process: process_t; + newtask: task_t); + +/* Set the owner of the process. The new owner must be within the + current authentication of the caller. */ +routine proc_setowner ( + process: process_t; + owner: uid_t); + +/* Get the process ID and the parent process ID, also find out if we + are orphaned. */ +routine proc_getpids ( + process: process_t; + out pid: pid_t; + out ppid: pid_t; + out orphaned: int); + +routine proc_setprocargs ( + process: process_t; + argv: int; + envp: int); + +/* Fetch the message port of a process */ +/* INTR */ +routine proc_getmsgport ( + process: process_t; + pid: pid_t; + out msgport: mach_port_t); + +/* Wait for a child process to exit. If pid is zero, it waits for any + child. If pid is negative, it waits for any process in the + specified process group. If pid is positive, it waits for the + specified process. The exit status and resource usage of the + process are returned in status and rusage respectively. */ +/* INTR */ +routine proc_wait ( + process: process_t; + sreplyport reply_port: reply_port_t; + pid: pid_t; + options: int; + out status: int; + out rusage: rusage_t; + out pid_status: pid_t); + +/* Have the process server stop all threads except contthread. */ +routine proc_dostop ( + process: process_t; + contthread: thread_t); + +/* Take over exception messages received on MSGPORT. Any exception + messages received will be forwarded to FORWARDPORT. In addition, + the thread causing the exception will be aborted (with thread_abort) + and have its state adjusted (as by thread_set_state). */ +routine proc_handle_exceptions ( + process: process_t; + msgport: mach_port_move_receive_t; + forwardport: mach_port_send_t; + flavor: int; + new_state: thread_state_t); + + + +/*** Mark bits. Some of these (exec, traced, eg) modify small pieces + of the proc server's behavior; others are purely informational. ***/ + +/* Mark the process as stopped on a signal. */ +routine proc_mark_stop ( + process: process_t; + signo: int); + +/* Mark the process as continued after a stop. */ +routine proc_mark_cont ( + process: process_t); + +/* Tell the process server that the process is going away. If it dies + without calling this, it will look to the parent like the process + died with SIGKILL. This call allows for a cleaner exit. */ +routine proc_mark_exit ( + process: process_t; + status: int); + +/* Inform the process server that the process has completed an exec. */ +routine proc_mark_exec ( + process: process_t); + +/* Inform the process server that the process has asked to be traced. + The only result of this is to change the behavior of wait by the + parent slightly. */ +routine proc_mark_traced ( + process: process_t); + +/* Inform the process server whether SIGCHLD should be sent for stopped + child processes. */ +routine proc_mod_stopchild ( + process: process_t; + doit: int); + + +/*** Miscellaneous process information queries. ***/ + +routine proc_pid2task ( + process: process_t; + pid: pid_t; + out task: task_t); + +routine proc_task2pid ( + process: process_t; + task: task_t; + out pid: pid_t); + +/* Return the procserver port for the specified task. */ +routine proc_task2proc ( + process: process_t; + task: task_t; + out proc: mach_port_make_send_t); + +routine proc_proc2task ( + process: process_t; + out task: task_t); + +routine proc_pid2proc ( + process: process_t; + pid: pid_t; + out proc: mach_port_make_send_t); + +routine proc_getprocinfo ( + process: process_t; + which: pid_t; + out procinfo: procinfo_t); + +routine proc_getprocargs ( + process: process_t; + which: pid_t; + out procargs: data_t); + +routine proc_getprocenv ( + process: process_t; + which: pid_t; + out procenv: data_t); + +/* These next two should not actually be used; they are here + for "historic reasons." You are not expected to understand this. */ +routine proc_setlogin ( + process: process_t; + logname: string_t); + +routine proc_getlogin ( + process: process_t; + out logname: string_t); + + + +/*** Sessions and process groups. ***/ + +/* Create a new session. The process's pgrp is set to its pid, and + becomes the session leader. */ +routine proc_setsid ( + process: process_t); + +/* Return the pid of a process's session leader. */ +routine proc_getsid ( + process: process_t; + pid: pid_t; + out sid: pid_t); + +/* Get the pgids of all the members of a session. */ +routine proc_getsessionpids ( + process: process_t; + sid: pid_t; + out pgidset: pidarray_t); + +/* Return a "session ID" port for the session of the caller. + This port is generally only available to members of the session. + (It has no listener, but is useful for identification purposes.) */ +routine proc_getsidport ( + process: process_t; + out sessport: mach_port_t); + +/* Set the process group of a process. */ +routine proc_setpgrp ( + process: process_t; + pid: pid_t; + pgrp: pid_t); + +/* Get the process group of a process. */ +routine proc_getpgrp ( + process: process_t; + pid: pid_t; + out pgrp: pid_t); + +/* Get the pids of all the members of a pgrp. */ +routine proc_getpgrppids ( + process: process_t; + pgrp: pid_t; + out pidset: pidarray_t); + + +/*** Process collections ***/ + +/* Create a new process collection. Process collections are + completely orthogonal to the Posix concepts of process group and + session. Process collections may be inheritable, which means that + child processes of members automatically become members themselves. + */ +routine proc_make_collection ( + process: process_t; + inheritable: int; + out proccoll: proccoll_t); + +/* Add the caller to the indicated process collection. */ +routine proc_add_collection ( + process: process_t; + proccoll: proccoll_t); + +/* Remove the process from the indicated process collection. */ +routine proc_remove_collection ( + process: process_t; + proccoll: proccoll_t); + +/* Remove the process from all process collections. */ +routine proc_remove_all_collections ( + process: process_t); + +/* Return all the process collections of which we are a member. */ +routine proc_get_collections ( + process: process_t; + collections: portarray_t); + +/* Return all the pids of processes in a collection. */ +routine proc_collection_members ( + process: process_t; + proccoll: proccoll_t; + pids: intarray_t); + +/* Return a pseudo-collection port for a process group. This is only + useful as an argument to proc_get_collports. */ +routine proc_pgrp_pcoll ( + process: process_t; + pgrp: pid_t; + out pcoll: proccoll_t); + +/* Return a pseudo-collection port for a session. This is only useful + as an argument to proc_get_collports. */ +routine proc_session_pcoll ( + process: process_t; + session: pid_t; + out pcoll: proccoll_t); + +/* Return send rights to all the message ports of the members of the + collection or pseudo-collection. These should not be saved for a + period of time, because processes are free to change their message + ports. */ +/* INTR */ +routine proc_get_collports ( + process: process_t; + proccoll: proccoll_t; + out pids: pidarray_t; + out msgports: portarray_t); -- cgit v1.2.3