| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* storeread.c (doc, arg_doc): Make arrays, not pointers; make const.
(doc): Add leading short description line before \v.
|
|
|
|
* rpctrace.c (docs, args_doc): Make arrays, not pointers.
(doc): Remove "\v.". Reported by Alfred M. Szmidt <ams@kemisten.nu>.
|
|
* vmstat.c (vm_state_refresh): Use memset instead of bzero.
(main): Likewise.
|
|
* Makefile (prog-subdirs): Add console-client.
sutils/
2002-09-17 Marcus Brinkmann <marcus@gnu.org>
* MAKEDEV.sh (mkdev: vcs): New console device.
(mkdev: tty[0-9a-f]|tty[0-9][0-9a-f]): Replaced with new rules for
tty[1-9][0-9].
utils/
2002-09-17 Marcus Brinkmann <marcus@gnu.org>
* console-ncurses.c: File removed (the ncursesw console client is
now a driver in the console-client).
* Makefile: Revert 2002-08-22 change:
Do not include`../config.make'.
(targets) [LIBNCURSES]: Removed.
(SRCS) [LIBNCURSES]: Likewise.
(HURDLIBS) [LIBNCURSES]: Likewise.
(console-ncurses): Target removed.
(console-ncurses-CPPFLAGS): Removed.
(console-ncurses-LDLIBS): Likewise.
console-client/
2002-09-17 Marcus Brinkmann <marcus@gnu.org>
* Makefile, bdf.c, bdf.h, bell.h, console.c, display.h, driver.c,
driver.h, generic-speaker.c, input.h, pc-kbd.c, timer.c, timer.h,
unicode.h, vga.c, vga-dynacolor.c, vga-dynacolor.h, vga-dynafont.c,
vga-dynafont.h, vga-hw.h, vga-support.c, vga-support.h: New file.
|
|
2002-09-10 Marcus Brinkmann <marcus@gnu.org>
* display.c (DISPLAY_CHANGE_FLAGS): New macro.
(struct changes): New member FLAGS.
(display_flush_filechange): Handle change of flags.
(display_output_some): Initialize DISPLAY->changes.flags.
(display_start_output): Clear CONS_FLAGS_SCROLL_LOCK in DISPLAY.
(display_stop_output): Set CONS_FLAGS_SCROLL_LOCK in DISPLAY.
hurd/
2002-09-10 Marcus Brinkmann <marcus@gnu.org>
* console.h (struct cons_display): New member FLAGS.
(union cons_change_t): Likewise for WHAT->flags.
libcons/
2002-09-10 Marcus Brinkmann <marcus@gnu.org>
* cons.h: New prototype for cons_vcons_set_scroll_lock.
(struct vcons): Add member FLAGS to state.
* file-changed.c (cons_S_file_changed): Handle change of flags.
* vcons-refresh.c (cons_vcons_refresh): Copy FLAGS field.
Call cons_vcons_set_scroll_lock.
* cons-switch.c (cons_switch): Initialize VCONS_ENTRY even if
DELTA is negative.
utils/
2002-09-09 Marcus Brinkmann <marcus@gnu.org>
* console-ncurses.c (cons_vcons_set_scroll_lock): New function.
|
|
2002-09-09 Marcus Brinkmann <marcus@gnu.org>
* Makefile (SRCS): Add vcons-scrollback.c.
* vcons-scrollback.c: New file.
* cons.h (struct vcons): Add SCROLLING member.
* file-changed.c: Include <assert.h>.
(cons_S_file_changed): Be careful to take VCONS->scrolling into
account when doing clipping and scrolling.
* cons-switch.c: Roll back to earlier version with vcons ->
vcons_entry adjustments. The user is now expected to hold a
reference to the VCONS.
* cons.h: Fix prototype, too.
* vcons-open.c (cons_vcons_open): Initialize VCONS->lock,
VCONS->input and VCONS->display.
utils/
2002-09-09 Marcus Brinkmann <marcus@gnu.org>
* console-ncurses.c (console_switch): Keep a reference to the port
instead refering to it by number.
|
|
2002-09-09 Marcus Brinkmann <marcus@gnu.org>
* vcons-remove.c: New file.
* Makefile (SRCS): Add vcons-destroy.c.
* cons.h: New type vcons_list_t.
(struct vcons_list): New structure.
(struct cons_notify): Remove VCONS member.
(struct vcons): Remove members NEXT, PREV and NOTIFY. Add the
notify structure to the top to make it possible to use a vcons as
a port. New member VCONS_ENTRY.
(struct cons): Change type of members vcons_list and vcons_last to
vcons_list_t. Remove member active.
(cons_vcons_add): Change prototype to match new definition.
(cons_vcons_remove): Likewise.
(cons_switch): Likewise.
(cons_lookup): Likewise.
(cons_vcons_open): Likewise.
(cons_vcons_destroy): New prototype.
* cons-lookup.c (cons_lookup): Change type of R_VCONS argument
vcons_list_t. Change type of previous_vcons and vcons variables
to vcons_list_t. Append _entry to all these variables.
Don't allocate and initialize a vcons_t, but a vcons_list_t.
After this has been added to the list, call cons_vcons_add.
* cons-switch.c: Do not include <error.h>
(cons_switch): Add arguments ACTIVE_ID and R_VCONS. New variable
ERR and VCONS_ENTRY. Remove variable ACTIVE. Do not keep track
of active console. Instead, look it up using ACTIVE_ID. Lock the
returned console. Call cons_vcons_open, not cons_vcons_activate.
* dir-changed.c (add_one): Change VCONS to VCONS_ENTRY and its
type from vcons_t to vcons_list_t to follow cons_lookup change.
(lookup_one): Likewise.
(cons_S_dir_changed): Likewise.
* file-changed.c (cons_S_file_changed): Cast NOTIFY to VCONS.
Check that NOTIFY->cons is not set instead that NOTIFY->vcons is.
* init-init.c (cons_init): Pass cons_vcons_destroy as
clean_routine to ports_create_class.
Don't initialize CONS->active, nor DIR_NOTIFY_PORT->vcons.
* vcons-add.c (cons_vcons_add): Change argument VCONS to CONS and
VCONS_ENTRY. Don't do anything here (the user must implement it
all).
* vcons-close.c: Don't include <errno.h>, <unistd.h>, <stdio.h>,
<sys/mman.h>, <sys/fcntl.h>, <mach.h>. Include <assert.h>,
<hurd/ports.h> and <cthreads.h>.
(cons_vcons_close): Clear VCONS->vcons_entry->vcons. Derefence
and destroy VCONS.
* vcons-open.c (cons_vcons_open): Change arguments from VCONS to
CONS, VCONS_ENTRY and R_VCONS. New variable VCONS. Set up VCONS
as a port, and request notification messages on that.
* vcons-remove.c: Do not include <errno.h>.
(cons_vcons_remove): Assert that VCONS_ENTRY does not have an open
VCONS.
utils/
2002-09-09 Marcus Brinkmann <marcus@gnu.org>
* console-ncurses.c: New global variable global_lock.
(main): Initialize global_lock.
(cons_vcons_activate): Removed.
(console_switch): New function.
(cons_vcons_add): New function.
(input_loop): Call console_switch, not cons_switch. Do not take
active_vcons lock but global_lock.
(cons_vcons_update): Take global lock.
(cons_vcons_set_cursor_pos): Likewise.
(cons_vcons_set_cursor_status): Likewise.
(cons_vcons_scroll): Likewise.
(cons_vcons_write): Likewise.
(cons_vcons_beep): Likewise.
(cons_vcons_flash): Likewise.
|
|
* console-ncurses.c (main): Call endwin () before bailing out
because of an error.
(cons_vcons_write): Use getyx and wmove on stdscr instead getsyx
and setsyx (which operate on newscr, and mess up the cursor
anyway, probably because we don't commit the change immediately).
Submitted by David Walter <dwalter@syr.edu>.
|
|
* aclocal.m4 (hurd_LIB_NCURSESW): New test, modified from GNU
inetutils 1.4.0.
* configure.in: Use hurd_LIB_NCURSESW.
* config.make.in (LIBNCURSESW): New variable, substituted by
configure.
(NCURSESW_INCLUDE): Likewise.
* Makefile (lib-subdirs): Add libcons.
(prog-subdirs): Add console.
console/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* console.h: Move file to ../hurd/.
* Makefile (LCLHDRS): Remove console.h.
* display.c: Include <hurd/console.h> instead "console.h".
* console.c: Likewise.
hurd/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* console.h: Move here from ../console/.
* Makefile (INSTHDRS): Add console.h.
utils/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* Makefile: Include `../config.make' early on to get LIBNCURSESW
variable from configure before including Makeconf.
(targets) [LIBNCURSES]: Add console-ncurses.
(SRCS) [LIBNCURSES]: Add console-ncurses.c.
(HURDLIBS) [LIBNCURSES]: Add cons.
(console-ncurses): New target.
(console-ncurses-CPPFLAGS): New variable.
(console-ncurses-LDLIBS): Likewise.
|
|
* aclocal.m4 (hurd_LIB_NCURSESW): New test, modified from GNU
inetutils 1.4.0.
* configure.in: Use hurd_LIB_NCURSESW.
* config.make.in (LIBNCURSESW): New variable, substituted by
configure.
(NCURSESW_INCLUDE): Likewise.
* Makefile (lib-subdirs): Add libcons.
(prog-subdirs): Add console.
console/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* console.h: Move file to ../hurd/.
* Makefile (LCLHDRS): Remove console.h.
* display.c: Include <hurd/console.h> instead "console.h".
* console.c: Likewise.
hurd/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* console.h: Move here from ../console/.
* Makefile (INSTHDRS): Add console.h.
utils/
2002-08-22 Marcus Brinkmann <marcus@gnu.org>
* Makefile: Include `../config.make' early on to get LIBNCURSESW
variable from configure before including Makeconf.
(targets) [LIBNCURSES]: Add console-ncurses.
(SRCS) [LIBNCURSES]: Add console-ncurses.c.
(HURDLIBS) [LIBNCURSES]: Add cons.
(console-ncurses): New target.
(console-ncurses-CPPFLAGS): New variable.
(console-ncurses-LDLIBS): Likewise.
|
|
|
|
* fakeroot.sh: Dont use "exec" command, since the original script
does not and some users use sh syntax here and not just commands.
|
|
* ping.c: File removed.
|
|
|
|
* ping.c: File removed.
* Makefile (targets, SRCS): Remove it.
(ping-CPPFLAGS, INSTALL-ping-ops, ping): And all its little friends.
|
|
|
|
* Makefile (INSTALL-vminfo-ops): Variable removed (no setuid).
* vmstat.c (ensure_def_pager_info): If get_privileged_ports fails with
EPERM, try to open /servers/default-pager instead.
* Makefile (INSTALL-vmstat-ops): Variable removed (no setuid).
|
|
* vmstat.c (ensure_def_pager_info): If get_privileged_ports fails with
EPERM, try to open /servers/default-pager instead.
* Makefile (INSTALL-vmstat-ops): Variable removed (no setuid).
|
|
|
|
* vminfo.c: Use `z' modifier format modifier for address/size values.
|
|
|
|
* ftpdir.c (pdirent): Use %lld format for off_t value.
|
|
|
|
* fakeauth.c (idvec_copyout): Fix argument type.
* pids.c (add_fn_pids): unsigned -> size_t
* w.c (add_utmp_procs): Likewise.
* login.c (add_canonical_host): Likewise.
* ps.c (main): Likewise.
* login.c (add_entry, main): Likewise.
* settrans.c (main): int -> size_t
* showtrans.c (main): Likewise.
* fsysopts.c (main): Likewise.
* vmstat.c (main): Use int for FWIDTHS.
* ping.c (main): size_t -> socklen_t
* fakeauth.c (S_auth_getids, S_auth_makeauth,
S_auth_server_authenticate): u_int -> size_t
* showtrans.c (main): Cast field width/precision args to int.
|
|
* pids.c (add_fn_pids): unsigned -> size_t
* w.c (add_utmp_procs): Likewise.
* login.c (add_canonical_host): Likewise.
* ps.c (main): Likewise.
* login.c (add_entry, main): Likewise.
* settrans.c (main): int -> size_t
* showtrans.c (main): Likewise.
* fsysopts.c (main): Likewise.
* vmstat.c (main): Use int for FWIDTHS.
* ping.c (main): size_t -> socklen_t
* fakeauth.c (S_auth_getids, S_auth_makeauth,
S_auth_server_authenticate): u_int -> size_t
* showtrans.c (main): Cast field width/precision args to int.
|
|
* storeinfo.c (print_store): Use %z format.
|
|
* rpctrace.c (print_data): Use if instead of switch to handle FP type
sizes, in case double == long double.
|
|
* rpctrace.c (parse_msgid_list): Fixed the check that tests if we
read exactly 3 fields from each line.
|
|
* fakeauth.c (main): Register NEWTASK as a child with the proc
server.
|
|
* devprobe.c: Include <version.h>.
(argp_program_version): New variable.
* storecat.c: Include <version.h>.
(argp_program_version): New variable.
* storeread.c: Include <version.h>.
(argp_program_version): New variable.
* gcore.c: Include <version.h>.
(argp_program_version): New variable.
|
|
|
|
* fakeroot.sh: Inside the chroot'd fakeauth environment,
run a shell that chdir's to what was our original current
directory (by name) before exec'ing the user's command.
|
|
|
|
* fakeauth.c (main): Don't use posix_spawnp. Use _hurd_exec instead.
|
|
* settrans.c (main): Return 0 instead of using break (which only
gets us out of the while loop).
|
|
* fakeauth.c (main): Add ARGP_IN_ORDER to argp_parse invocation.
(main: parse_opt): New function.
(main): Set parser in ARGP to parse_opt.
|
|
|
|
* fakeroot.sh: New file.
* Makefile (targets, special-targets, SRCS): Add it.
|
|
* fakeauth.c (main): Update doc strings, clean up argp_parse call.
|
|
|
|
* settrans.c (options): Add --chroot/-C option.
(main_opt): Parse that option, take following args until "--"
as a command to exec chroot'd to the translated node.
|
|
* vmstat.c (print_val): Use %lld printf format for val_t.
|
|
* msgport.c (str2flags): Add break after default: label.
|
|
|
|
* fakeauth.c: New file.
* Makefile (fakeauth): New target.
(targets): Add it.
(SRCS): Add fakeauth.c.
(auth-MIGSFLAGS, fakeauth-CPPFLAGS, authServer-CPPFLAGS,
auth_requestUser-CPPFLAGS): New variables.
|
|
* shd.c: Include <error.h> for `error' decl.
|
|
* fakeauth.c: New file.
* Makefile (fakeauth): New target.
(targets): Add it.
(SRCS): Add fakeauth.c.
(auth-MIGSFLAGS, fakeauth-CPPFLAGS, authServer-CPPFLAGS,
auth_requestUser-CPPFLAGS): New variables.
* Makefile (rpctrace): Put libthreads before libports.
|
|
|
