summaryrefslogtreecommitdiff
path: root/ext2fs
AgeCommit message (Collapse)Author
2002-01-042002-01-03 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (write_node): Never clear i_translator here. That is only done by diskfs_set_translator.
2001-12-22Remove file supposedly deleted in 1995.Roland McGrath
2001-11-21.Roland McGrath
2001-11-212001-11-21 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (read_node): Just always call getpid for the fsid value.
2001-08-172001-08-17 Marcus Brinkmann <marcus@gnu.org>Marcus Brinkmann
* ialloc.c (diskfs_alloc_node): Remove warnings about stale nonzero st_blocks or st_size.
2001-08-17.Roland McGrath
2001-08-172001-08-16 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (write_node): Leave i_size, i_blocks, i_translator unchanged when the inode has been deleted. Suggested by Marcus Brinkmann.
2001-08-172001-08-16 Roland McGrath <roland@frob.com>Roland McGrath
* dir.c (diskfs_dirremove_hard): Remove redundant DP->dn_set_mtime set. Noticed by Marcus Brinkmann.
2001-08-102001-08-09 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (diskfs_get_translator): Fail with EFTYPE if the length field stored on disk is unreasonable. Don't crash on ENOMEM. Use memcpy instead of bcopy.
2001-08-10.Roland McGrath
2001-08-102001-08-09 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (diskfs_get_translator): Fail with EFTYPE if the length field stored on disk is unreasonable. Don't crash on ENOMEM. Use memcpy instead of bcopy.
2001-06-09* inode.c (diskfs_set_statfs): If number of free blocks is lessMark Kettenis
than the number of reserved blocks, set the number of available blocks to 0.
2001-04-01.Roland McGrath
2001-04-012001-03-03 Roland McGrath <roland@frob.com>Roland McGrath
* hyper.c (zeroblock, modified_global_blocks): Remove superfluous zero initializers. (allocate_mod_map): Likewise for static here. (get_hypermetadata): Don't munmap old ZEROBLOCK, just keep it. Allocate ZEROBLOCK with PROT_READ.
2001-01-08doc/Marcus Brinkmann
2001-01-08 Marcus Brinkmann <marcus@gnu.org> * hurd.texi (Store Management): Replace off_t with store_offset_t. (Store I/O): Likewise. (Store Classes): Likewise. ext2fs/ 2001-01-08 Marcus Brinkmann <marcus@gnu.org> * ext2fs.c (main): Use %Ld instead %ld to print store->size. * hyper.c (get_hypermetadata): Likewise. libstore/ 2001-01-08 Marcus Brinkmann <marcus@gnu.org> * zero.c (zero_remap): Change type of variables length, old_length to store_offset_t. (zero_decode): Change type of variable size to store_offset_t. (zero_open): Likewise. Use strtoull instead strtoul to parse size argument from name. Use store_offset_t for max_offs and its calculation. (store_zero_create): Use store_offset_t type for size argument. * derive.c (_store_derive): Use store_offset_t as type for variable last_part_base. * stripe.c (addr_adj): Change types of addr argument and return value to store_offset_t. (store_ileave_create): Change type of interleave argument and variables min_end and end to store_offset_t, but type of variable block_size to size_t. (store_concat_create): Change type of variable block_size to size_t. * make.c (_store_create): Change end argument type to store_offset_t. * store.h: New type store_offset_t, define to off64_t. (struct store_run): Change type of start and length to store_offset_t. (struct store): Change type of end, wrap_src, wrap_dst, blocks, size to store_offset_t. Change type of addr arg in store_read_meth_t and store_write_meth_t to store_offset_t, as well as in declarations for store_read and store_write. Change type of argument end in _store_create declaration to store_offset_t. Change type of argument size in store_zero_create to store_offset_t. Change type of argument interleace in store_ileace_create to store_offset_t. * rdwr.c (store_find_first_run): Change type of return value, addr and *base arguments, and variables wrap_src and run_blocks to store_offset_t. (store_next_run): Change type of *base argument to store_offset_t. (store_write): Change type of addr argument and variable base to store_offset_t. (store_read): Likewise, also for addr argument of local function seg_read. Change type of len argument to size_t. * copy.c (copy_read): Change type of addr argument to store_offset_t. (copy_write): Likewise. * device.c (dev_read): Likewise. (dev_write): Likewise. * file.c (file_read): Likewise. (file_write): Likewise. (file_byte_read): Likewise. (file_byte_write): Likewise. * mvol.c (mvol_read): Likewise. (mvol_write): Likewise. * remap.c (remap_read): Likewise. (remap_write): Likewise. * stripe.c (stripe_read): Likewise. (stripe_write): Likewise. * task.c (task_read): Likewise. (task_write): Likewise. * zero.c (zero_read): Likewise. (zero_write): Likewise. * remap.c (store_remap_runs): Change type of addr and len arguments of local function add_run and of local variables addr, length, baddr, blen and len to store_offset_t. (remap_open): Cast -1 to store_offset_t, not off_t. * argp.c (struct store_parsed): Change type of interleave from off_t to store_offset_t. (store_parsed_append_args): Use %Ld instead %ld to print interleave value. (store_parsed_name): Likewise. ufs/ 2001-01-08 Marcus Brinkmann <marcus@gnu.org> * main.c (main): Use %Ld instead %ld to print store->size. * hyper.c (get_hypermetadata): Likewise. * inode.c (diskfs_S_file_get_storage_info): Change type of variables start and length from off_t to store_offset_t. utils/ 2001-01-08 Marcus Brinkmann <marcus@gnu.org> * storeread.c (main): Change type of addr to store_offset_t, also for first argument of local function dump. Add comment about store->size as len parameter for store_read. Use atoll instead atoi for addr argument. * storeinfo.c (print_store): Remove local function pint, add two similar functions psiz and poff, accepting and printing a size_t or store_offset_t respectively. Use psiz to print block_size, poff to print blocks and size of store. Use %Ld instead %ld to print runs. * storecat.c (main): Change type of addr and left to store_offset_t.
2001-01-07doc/Marcus Brinkmann
2001-01-07 Marcus Brinkmann <marcus@gnu.org> * hurd.texi (Diskfs Callbacks): Make diskfs_dirstat_size const. ext2fs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * dir.c: Make diskfs_dirstat_size const. isofs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * lookup.c: Make diskfs_dirstat_size const. ufs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * dir.c: Make diskfs_dirstat_size const. libdiskfs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * diskfs.h: Make diskfs_dirstat_size const. libdiskfs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * file-statfs.c: Include <string.h>. ftpfs/ 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * dir.c (ftpfs_dir_create): Fix last change (calloc invocation). 2001-01-07 Marcus Brinkmann <marcus@gnu.org> * copy.c: Include <mach.h>. New macro page_aligned. (copy_write): Cast buf to vm_address_t in call to vm_write. Dereference amount for memcpy. (copy_read): Add len parameter to vm_read, remove redundant following len assignment.
2001-01-072000-12-21 Marcus Brinkmann <marcus@gnu.org>Marcus Brinkmann
* pager.c: Include <errno.h>. (create_disk_pager): Panic if malloc fails. Reported by Igor Khavkine <i_khavki@alcor.concordia.ca>. * inode.c (diskfs_get_translator): If malloc fails, set err to ENOMEM. Initialize err with 0, and return it at the end of the function. Reported by Igor Khavkine <i_khavki@alcor.concordia.ca>.
2000-12-03.Roland McGrath
2000-12-032000-10-01 Roland McGrath <roland@frob.com>Roland McGrath
* truncate.c (diskfs_truncate): Use & instead of %.
2000-12-032000-12-02 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (write_all_disknodes): Call diskfs_set_node_times after pokel_sync, since it might delay a little. (write_node): Remove assert that dn_set_mtime et al are clear. It is ok if they are set in parallel, because the latter setting will be carried out eventually.
2000-11-30ext2fs, ufs:Marcus Brinkmann
2000-11-30 Marcus Brinkmann <marcus@gnu.org> * dir.c (diskfs_lookup_hard): If name is too long, clear DS before returning ENAMETOOLONG. pfinet: 2000-11-02 Marcus Brinkmann <marcus@gnu.org> * tunnel.c (trivfs_S_io_get_owner): Add return type to silence compiler warning.
2000-10-02.Roland McGrath
2000-10-022000-10-01 Roland McGrath <roland@frob.com>Roland McGrath
* inode.c (write_node): Use memcpy instead of a loop.
2000-07-26* Makefile (HURDLIBS): Reorder libs such that the threads libMark Kettenis
comes before the ports lib. This makes sure the functions in libthreads properly override the stubs in libports with the new dynamic linker semantics in glibc 2.2. * truncate.c (trunc_indirect): Add missing argument to pager_flush_some.
2000-07-262000-07-26 Marcus Brinkmann <marcus@gnu.org>Marcus Brinkmann
* truncate.c (trunc_indirect): Add missing argument to pager_flush_some.
2000-07-252000-07-25 Thomas Bushnell, BSG <tb@mit.edu>Thomas Bushnell
* truncate.c (trunc_indirect): Before freeing an indirect block, remove it from the disk pager's kernel cache.
2000-03-10.Roland McGrath
2000-03-102000-03-09 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* balloc.c (ext2_free_blocks, ext2_new_block): Fix formats to avoid -Wformat warnings. * getblk.c (ext2_alloc_block, inode_getblk, ext2_getblk): Likewise. * ialloc.c (ext2_count_free_inodes): Likewise. * truncate.c (trunc_direct): Likewise. * pager.c (pending_blocks_write, diskfs_grow): Likewise.
2000-03-03.Roland McGrath
2000-03-032000-03-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* dir.c (diskfs_get_directs): Don't allocate buffer for *DATA until after scanning for ENTRY and possibly returning EOF.
2000-02-05.Roland McGrath
2000-02-052000-02-05 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* ext2_fs.h: Update from Linux 2.3.42 version (ext2_fs_i.h unchanged). * inode.c (check_high_bits): In accordance with Linux 2.3.42 behavior, permit 32-bit uids on non-hurd filesystems unless i_dtime is zero (which indicates an extra old Linux ext2 implementation I guess).
2000-01-16*** empty log message ***Mark Kettenis
2000-01-162000-01-16 Mark Kettenis <kettenis@gnu.org>Mark Kettenis
* pager.c (file_pager_write_page): Lock NODE->dn->alloc_lock before accessing NODE->allocsize. Fixes Debian bug #40302.
1999-10-13.Roland McGrath
1999-10-131999-10-13 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* ext2fs.c (diskfs_name_max): New variable.
1999-10-07.Roland McGrath
1999-10-071999-10-06 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* hyper.c (get_hypermetadata): Avoid overflow in calculation of disk size vs superblock-specified requirement. Add a warning for wasted disk blocks after last filesystem block.
1999-10-03.Roland McGrath
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* dir.c (ext2_file_type): #if 0 out this variable. (diskfs_get_directs): #if 0 out code to interpret file_type field and set d_type. Instead, always return DT_UNKNOWN for now.
1999-10-03.Roland McGrath
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* dir.c (file_type_ext2): #if 0 out. (diskfs_direnter_hard): #if 0 out code to set file_type field in directory entries. Instead, always set it to zero.
1999-10-03.Roland McGrath
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* bitmap.c (ffz): Subtract one from (1-origin) result of ffs to get our (0-origin) result. * Makefile (LCLHDRS): bitmap.h -> bitmap.c
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* ext2fs.h (test_bit, set_bit, clear_bit): Rewritten to operate on 32-bit words instead of bytes. * ext2fs.h (group_desc): Inline function replaced with macro. (group_desc_image): New variable. * hyper.c (get_hypermetadata): Initialize it. * ext2fs.h (sblock_block): Declare new variable. (SBLOCK_LBLOCK): Macro removed. (SBLOCK_OFFS): Define in terms of sblock_block. * ext2fs.c (options): Add --sblock/-S. (parse_opt): Parse it to set sblock_block. * hyper.c (sblock_block): New variable. (get_hypermetadata): Use sblock_block instead of constant SBLOCK_BLOCK. * hyper.c (get_hypermetadata): Use EXT2_MAX_BLOCK_SIZE instead of hard-wired 8192. Don't use ffs to compute log2_block_size, and don't check for the impossible case of non-power-of-two block size (the block size specification we start with is given as a power of two!). * ext2fs.h (block_size): Change type to unsigned int. (BLOCKSIZE_SCALE): Just use SBLOCK->s_log_block_size directly. * hyper.c (get_hypermetadata): Fix printf formats to silence warning. * dir.c (dirscanblock): Likewise.
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* truncate.c (diskfs_truncate): Add missing call to diskfs_end_catch_exception.
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* ext2fs.h (sblock_block): Declare new variable. (SBLOCK_LBLOCK): Macro removed. (SBLOCK_OFFS): Define in terms of sblock_block. * ext2fs.c (options): Add --sblock/-S. (parse_opt): Parse it to set sblock_block. * hyper.c (sblock_block): New variable. (get_hypermetadata): Use sblock_block instead of constant SBLOCK_BLOCK. * ext2fs.c (options): List --debug/-D unconditionally, adding to help text #ifndef EXT2FS_DEBUG (parse_opt): Always grok -D. #ifndef EXT2FS_DEBUG, reject it with message saying debugging support not compiled in.
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* Makefile (LCLHDRS): bitmap.h -> bitmap.c
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* hyper.c (get_hypermetadata): Use EXT2_MAX_BLOCK_SIZE instead of hard-wired 8192. Don't use ffs to compute log2_block_size, and don't check for the impossible case of non-power-of-two block size (the block size specification we start with is given as a power of two!). * ext2fs.h (block_size): Change type to unsigned int. (BLOCKSIZE_SCALE): Just use SBLOCK->s_log_block_size directly. * hyper.c (get_hypermetadata): Fix printf formats to silence warning. * dir.c (dirscanblock): Likewise.
1999-10-031999-10-03 Roland McGrath <roland@baalperazim.frob.com>Roland McGrath
* ext2fs.h (group_desc): Inline function replaced with macro. (group_desc_image): New variable. * hyper.c (get_hypermetadata): Initialize it. * ext2fs.h (sblock_block): Declare new variable. (SBLOCK_LBLOCK): Macro removed. (SBLOCK_OFFS): Define in terms of sblock_block. * ext2fs.c (options): Add --sblock/-S. (parse_opt): Parse it to set sblock_block. * hyper.c (sblock_block): New variable. (get_hypermetadata): Use sblock_block instead of constant SBLOCK_BLOCK. * hyper.c (get_hypermetadata): Use EXT2_MAX_BLOCK_SIZE instead of hard-wired 8192. Don't use ffs to compute log2_block_size, and don't check for the impossible case of non-power-of-two block size (the block size specification we start with is given as a power of two!). * ext2fs.h (block_size): Change type to unsigned int. (BLOCKSIZE_SCALE): Just use SBLOCK->s_log_block_size directly. * hyper.c (get_hypermetadata): Fix printf formats to silence warning. * dir.c (dirscanblock): Likewise.