libstore: replaced gz decompression code with libz

Note: dropped .zip support

configure.ac: added check for libz
ext2fs/Makefile: linked libz
fatfs/Makefile: linked libz
isofs/Makefile: linked libz
libstore/Makefile: linked libz
libstore/do-gunzip.c: new decompression function using libz calls.
libstore/gunzip.c: removed no longer needed code replaced by do_gunzip()
libstore/gzip.h: deleted, no longer needed
libstore/inflate.c: deleted: no longer needed
libstore/tailor.h: deleted: no longer needed
libstore/unzip.c: deleted: no longer needed
libstore/util.c: removed no longer needed code.

12 files changed, 70 insertions, 1766 deletions

diff --git a/configure.ac b/configure.ac
index cea25767..b6f777e2 100644
--- a/configure.ac
+++ b/configure.ac
@@ -316,6 +316,7 @@ AC_SUBST([libblkid_LIBS])
 AC_SUBST([libblkid_CFLAGS])
 
 AC_CHECK_LIB(bz2, BZ2_bzCompress, , AC_MSG_ERROR([libbz2 is required.]))
+AC_CHECK_LIB(z, deflate, , AC_MSG_ERROR([libz is required.]))
 
 AC_CONFIG_FILES([config.make ${makefiles}])
 AC_OUTPUT
diff --git a/ext2fs/Makefile b/ext2fs/Makefile
index 516766a7..32e40f06 100644
--- a/ext2fs/Makefile
+++ b/ext2fs/Makefile
@@ -24,7 +24,7 @@ SRCS = balloc.c dir.c ext2fs.c getblk.c hyper.c ialloc.c \
        inode.c pager.c pokel.c truncate.c storeinfo.c msg.c xinl.c
 OBJS = $(SRCS:.c=.o)
 HURDLIBS = diskfs pager iohelp fshelp store ports ihash shouldbeinlibc
-OTHERLIBS = -lpthread -lbz2
+OTHERLIBS = -lpthread -lbz2 -lz
 
 include ../Makeconf
 
diff --git a/fatfs/Makefile b/fatfs/Makefile
index 9a04fbb2..2555669c 100644
--- a/fatfs/Makefile
+++ b/fatfs/Makefile
@@ -23,7 +23,7 @@ SRCS = inode.c main.c dir.c pager.c fat.c virt-inode.c node-create.c
 
 OBJS = $(SRCS:.c=.o)
 HURDLIBS = diskfs iohelp fshelp store pager ports ihash shouldbeinlibc
-OTHERLIBS = -lpthread -lbz2
+OTHERLIBS = -lpthread -lbz2 -lz
 
 include ../Makeconf
 
diff --git a/isofs/Makefile b/isofs/Makefile
index a037c218..9147c123 100644
--- a/isofs/Makefile
+++ b/isofs/Makefile
@@ -22,7 +22,7 @@ SRCS = inode.c main.c lookup.c pager.c rr.c
 
 OBJS = $(SRCS:.c=.o)
 HURDLIBS = diskfs iohelp fshelp store pager ports ihash shouldbeinlibc
-OTHERLIBS = -lpthread -lbz2
+OTHERLIBS = -lpthread -lbz2 -lz
 
 include ../Makeconf
 
diff --git a/libstore/Makefile b/libstore/Makefile
index 542738f2..2bb5e4b9 100644
--- a/libstore/Makefile
+++ b/libstore/Makefile
@@ -53,8 +53,8 @@ libstore.so-LDLIBS += $(PARTED_LIBS) -ldl
 installhdrs=store.h
 
 HURDLIBS = shouldbeinlibc
-LDLIBS += -lpthread -lbz2
-GUNZIP_OBJS = unzip.o inflate.o util.o
+LDLIBS += -lpthread -lbz2 -lz
+GUNZIP_OBJS = do-gunzip.o util.o
 BUNZIP2_OBJS = do-bunzip2.o
 OBJS = $(SRCS:.c=.o) $(GUNZIP_OBJS) $(BUNZIP2_OBJS)
 
diff --git a/libstore/do-gunzip.c b/libstore/do-gunzip.c
new file mode 100644
index 00000000..6a1c2a95
--- /dev/null
+++ b/libstore/do-gunzip.c
@@ -0,0 +1,59 @@
+#include <zlib.h>
+
+/* I/O interface */
+extern int (*unzip_read) (char *buf, size_t maxread);
+extern void (*unzip_write) (const char *buf, size_t nwrite);
+extern void (*unzip_read_error) (void);
+extern void (*unzip_error) (const char *msg);
+
+#define INBUFSIZ	0x1000
+#define OUTBUFSIZ	0x1000
+
+static unsigned char inbuf[INBUFSIZ];
+static unsigned char outbuf[OUTBUFSIZ];
+
+void
+do_gunzip (void)
+{
+  int result;
+  z_stream strm;
+
+  strm.zalloc = NULL;
+  strm.zfree = NULL;
+  strm.opaque = NULL;
+
+  strm.avail_in  = 0;
+  strm.next_out = outbuf;
+  strm.avail_out = OUTBUFSIZ;
+
+  result = inflateInit2 (&strm, 32 + MAX_WBITS);
+
+  while (result == Z_OK)
+  {
+    if (strm.avail_in == 0)
+    {
+      strm.next_in = inbuf;
+      strm.avail_in  = (*unzip_read)((char*) strm.next_in, INBUFSIZ);
+
+      if (strm.avail_in == 0)
+        break;
+    }
+
+    result = inflate (&strm, Z_NO_FLUSH);
+
+    if ((result != Z_OK) && (result != Z_STREAM_END))
+      break;
+
+    if ((strm.avail_out == 0) || (result == Z_STREAM_END))
+    {
+      (*unzip_write) ((char*) outbuf, OUTBUFSIZ - strm.avail_out);
+      strm.next_out = outbuf;
+      strm.avail_out = OUTBUFSIZ;
+    }
+  }
+
+  inflateEnd (&strm);
+
+  if (result != Z_STREAM_END)
+    (*unzip_error) (NULL);
+}
diff --git a/libstore/gunzip.c b/libstore/gunzip.c
index 7c449403..f47c0b2b 100644
--- a/libstore/gunzip.c
+++ b/libstore/gunzip.c
@@ -18,35 +18,14 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111, USA. */
 
-#include <stdio.h>
-#include <string.h>
-#include <setjmp.h>
-#include <sys/mman.h>
+#include <errno.h>
 
-#include "store.h"
-
-/* gzip.h makes several annoying defines & decls, which we have to work
-   around. */
-#define file_t gzip_file_t
-#include "gzip.h"
-#undef file_t
-#undef head
+extern void do_gunzip (void);	/* Entry point to gunzip engine.  */
 
 static error_t
 DO_UNZIP (void)
 {
-  /* Entry points to unzip engine.  */
-  int get_method (int);
-  extern long int bytes_out;
-
-  if (get_method (0) != 0)
-    /* Not a happy gzip file.  */
-    return EINVAL;
-
-  /* Matched gzip magic number.  Ready to unzip.
-     Set up the output stream and let 'er rip.  */
-  bytes_out = 0;
-  unzip (17, 23);		/* Arguments ignored.  */
+  do_gunzip ();
   return 0;
 }
 
diff --git a/libstore/gzip.h b/libstore/gzip.h
deleted file mode 100644
index aedc257d..00000000
--- a/libstore/gzip.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/* gzip.h -- common declarations for all gzip modules
- * Copyright (C) 1992-1993, 1996 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
-
-#if defined(__STDC__) || defined(PROTO)
-#  define OF(args)  args
-#else
-#  define OF(args)  ()
-#endif
-
-#ifdef __STDC__
-   typedef void *voidp;
-#else
-   typedef char *voidp;
-#endif
-
-/* I don't like nested includes, but the string and io functions are used
- * too often
- */
-#include <stdio.h>
-#if !defined(NO_STRING_H) || defined(STDC_HEADERS)
-#  include <string.h>
-#  if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
-#    include <memory.h>
-#  endif
-#  define memzero(s, n)     memset ((voidp)(s), 0, (n))
-#else
-#  include <strings.h>
-#  define strchr            index 
-#  define strrchr           rindex
-#  define memcpy(d, s, n)   bcopy((s), (d), (n)) 
-#  define memcmp(s1, s2, n) bcmp((s1), (s2), (n)) 
-#  define memzero(s, n)     bzero((s), (n))
-#endif
-
-#ifndef RETSIGTYPE
-#  define RETSIGTYPE void
-#endif
-
-#define local static
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-/* Return codes from gzip */
-#define OK      0
-#define ERROR   1
-#define WARNING 2
-
-/* Compression methods (see algorithm.doc) */
-#define STORED      0
-#define COMPRESSED  1
-#define PACKED      2
-#define LZHED       3
-/* methods 4 to 7 reserved */
-#define DEFLATED    8
-#define MAX_METHODS 9
-extern int method;         /* compression method */
-
-/* To save memory for 16 bit systems, some arrays are overlaid between
- * the various modules:
- * deflate:  prev+head   window      d_buf  l_buf  outbuf
- * unlzw:    tab_prefix  tab_suffix  stack  inbuf  outbuf
- * inflate:              window             inbuf
- * unpack:               window             inbuf  prefix_len
- * unlzh:    left+right  window      c_table inbuf c_len
- * For compression, input is done in window[]. For decompression, output
- * is done in window except for unlzw.
- */
-
-#ifndef	INBUFSIZ
-#  ifdef SMALL_MEM
-#    define INBUFSIZ  0x2000  /* input buffer size */
-#  else
-#    define INBUFSIZ  0x8000  /* input buffer size */
-#  endif
-#endif
-#define INBUF_EXTRA  64     /* required by unlzw() */
-
-#ifndef	OUTBUFSIZ
-#  ifdef SMALL_MEM
-#    define OUTBUFSIZ   8192  /* output buffer size */
-#  else
-#    define OUTBUFSIZ  16384  /* output buffer size */
-#  endif
-#endif
-#define OUTBUF_EXTRA 2048   /* required by unlzw() */
-
-#ifndef DIST_BUFSIZE
-#  ifdef SMALL_MEM
-#    define DIST_BUFSIZE 0x2000 /* buffer for distances, see trees.c */
-#  else
-#    define DIST_BUFSIZE 0x8000 /* buffer for distances, see trees.c */
-#  endif
-#endif
-
-#ifdef DYN_ALLOC
-#  define EXTERN(type, array)  extern type * near array
-#  define DECLARE(type, array, size)  type * near array
-#  define ALLOC(type, array, size) { \
-      array = (type*)fcalloc((size_t)(((size)+1L)/2), 2*sizeof(type)); \
-      if (array == NULL) error("insufficient memory"); \
-   }
-#  define FREE(array) {if (array != NULL) fcfree(array), array=NULL;}
-#else
-#  define EXTERN(type, array)  extern type array[]
-#  define DECLARE(type, array, size)  type array[size]
-#  define ALLOC(type, array, size)
-#  define FREE(array)
-#endif
-
-EXTERN(uch, inbuf);          /* input buffer */
-EXTERN(uch, outbuf);         /* output buffer */
-EXTERN(ush, d_buf);          /* buffer for distances, see trees.c */
-EXTERN(uch, window);         /* Sliding window and suffix table (unlzw) */
-#define tab_suffix window
-#ifndef MAXSEG_64K
-#  define tab_prefix prev    /* hash link (see deflate.c) */
-#  define head (prev+WSIZE)  /* hash head (see deflate.c) */
-   EXTERN(ush, tab_prefix);  /* prefix code (see unlzw.c) */
-#else
-#  define tab_prefix0 prev
-#  define head tab_prefix1
-   EXTERN(ush, tab_prefix0); /* prefix for even codes */
-   EXTERN(ush, tab_prefix1); /* prefix for odd  codes */
-#endif
-
-extern unsigned insize; /* valid bytes in inbuf */
-extern unsigned inptr;  /* index of next byte to be processed in inbuf */
-extern unsigned outcnt; /* bytes in output buffer */
-
-extern long bytes_in;   /* number of input bytes */
-extern long bytes_out;  /* number of output bytes */
-extern long header_bytes;/* number of bytes in gzip header */
-
-#define isize bytes_in
-/* for compatibility with old zip sources (to be cleaned) */
-
-extern int  ifd;        /* input file descriptor */
-extern int  ofd;        /* output file descriptor */
-extern char ifname[];   /* input file name or "stdin" */
-extern char ofname[];   /* output file name or "stdout" */
-extern char *progname;  /* program name */
-
-extern long time_stamp; /* original time stamp (modification time) */
-extern long ifile_size; /* input file size, -1 for devices (debug only) */
-
-typedef int file_t;     /* Do not use stdio */
-#define NO_FILE  (-1)   /* in memory compression */
-
-
-#define	PACK_MAGIC     "\037\036" /* Magic header for packed files */
-#define	GZIP_MAGIC     "\037\213" /* Magic header for gzip files, 1F 8B */
-#define	OLD_GZIP_MAGIC "\037\236" /* Magic header for gzip 0.5 = freeze 1.x */
-#define	LZH_MAGIC      "\037\240" /* Magic header for SCO LZH Compress files*/
-#define PKZIP_MAGIC    "\120\113\003\004" /* Magic header for pkzip files */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-/* internal file attribute */
-#define UNKNOWN 0xffff
-#define BINARY  0
-#define ASCII   1
-
-#ifndef WSIZE
-#  define WSIZE 0x8000     /* window size--must be a power of two, and */
-#endif                     /*  at least 32K for zip's deflate method */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST  (WSIZE-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-extern int decrypt;        /* flag to turn on decryption */
-extern int exit_code;      /* program exit code */
-extern int verbose;        /* be verbose (-v) */
-extern int quiet;          /* be quiet (-q) */
-extern int level;          /* compression level */
-extern int test;           /* check .z file integrity */
-extern int to_stdout;      /* output to stdout (-c) */
-extern int save_orig_name; /* set if original name must be saved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf(0))
-#define try_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf(1))
-
-/* put_byte is used for the compressed output, put_ubyte for the
- * uncompressed output. However unlzw() uses window for its
- * suffix table instead of its output buffer, so it does not use put_ubyte
- * (to be cleaned up).
- */
-#define put_byte(c) {outbuf[outcnt++]=(uch)(c); if (outcnt==OUTBUFSIZ)\
-   flush_outbuf();}
-#define put_ubyte(c) {window[outcnt++]=(uch)(c); if (outcnt==WSIZE)\
-   flush_window();}
-
-/* Output a 16 bit value, lsb first */
-#define put_short(w) \
-{ if (outcnt < OUTBUFSIZ-2) { \
-    outbuf[outcnt++] = (uch) ((w) & 0xff); \
-    outbuf[outcnt++] = (uch) ((ush)(w) >> 8); \
-  } else { \
-    put_byte((uch)((w) & 0xff)); \
-    put_byte((uch)((ush)(w) >> 8)); \
-  } \
-}
-
-/* Output a 32 bit value to the bit stream, lsb first */
-#define put_long(n) { \
-    put_short((n) & 0xffff); \
-    put_short(((ulg)(n)) >> 16); \
-}
-
-#define seekable()    0  /* force sequential output */
-#define translate_eol 0  /* no option -a yet */
-
-#define tolow(c)  (isupper(c) ? (c)-'A'+'a' : (c))    /* force to lower case */
-
-/* Macros for getting two-byte and four-byte header values */
-#define SH(p) ((ush)(uch)((p)[0]) | ((ush)(uch)((p)[1]) << 8))
-#define LG(p) ((ulg)(SH(p)) | ((ulg)(SH((p)+2)) << 16))
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-#define WARN(msg) {if (!quiet) fprintf msg ; \
-		   if (exit_code == OK) exit_code = WARNING;}
-
-	/* in zip.c: */
-extern int zip        OF((int in, int out));
-extern int file_read  OF((char *buf,  unsigned size));
-
-	/* in unzip.c */
-extern int unzip      OF((int in, int out));
-extern int check_zipfile OF((int in));
-
-	/* in unpack.c */
-extern int unpack     OF((int in, int out));
-
-	/* in unlzh.c */
-extern int unlzh      OF((int in, int out));
-
-	/* in gzip.c */
-RETSIGTYPE abort_gzip OF((void));
-
-        /* in deflate.c */
-void lm_init OF((int pack_level, ush *flags));
-ulg  deflate OF((void));
-
-        /* in trees.c */
-void ct_init     OF((ush *attr, int *method));
-int  ct_tally    OF((int dist, int lc));
-ulg  flush_block OF((char *buf, ulg stored_len, int eof));
-
-        /* in bits.c */
-void     bi_init    OF((file_t zipfile));
-void     send_bits  OF((int value, int length));
-unsigned bi_reverse OF((unsigned value, int length));
-void     bi_windup  OF((void));
-void     copy_block OF((char *buf, unsigned len, int header));
-extern   int (*read_buf) OF((char *buf, unsigned size));
-
-	/* in util.c: */
-extern int copy           OF((int in, int out));
-extern ulg  updcrc        OF((uch *s, unsigned n));
-extern void clear_bufs    OF((void));
-extern int  fill_inbuf    OF((int eof_ok));
-extern void flush_outbuf  OF((void));
-extern void flush_window  OF((void));
-extern void write_buf     OF((int fd, voidp buf, unsigned cnt));
-extern char *strlwr       OF((char *s));
-/* extern char *basename     OF((char *fname));*/
-extern void make_simple_name OF((char *name));
-extern char *add_envopt   OF((int *argcp, char ***argvp, char *env));
-extern void error         OF((char *m));
-extern void warn          OF((char *a, char *b));
-extern void read_error    OF((void));
-extern void write_error   OF((void));
-extern void display_ratio OF((long num, long den, FILE *file));
-extern voidp xmalloc      OF((unsigned int size));
-
-	/* in inflate.c */
-extern int inflate OF((void));
diff --git a/libstore/inflate.c b/libstore/inflate.c
deleted file mode 100644
index c3be4381..00000000
--- a/libstore/inflate.c
+++ /dev/null
@@ -1,954 +0,0 @@
-/* inflate.c -- Not copyrighted 1992 by Mark Adler
-   version c10p1, 10 January 1993 */
-
-/* You can do whatever you like with this source file, though I would
-   prefer that if you modify it and redistribute it that you include
-   comments to that effect with your name and the date.  Thank you.
-   [The history has been moved to the file ChangeLog.]
- */
-
-/*
-   Inflate deflated (PKZIP's method 8 compressed) data.  The compression
-   method searches for as much of the current string of bytes (up to a
-   length of 258) in the previous 32K bytes.  If it doesn't find any
-   matches (of at least length 3), it codes the next byte.  Otherwise, it
-   codes the length of the matched string and its distance backwards from
-   the current position.  There is a single Huffman code that codes both
-   single bytes (called "literals") and match lengths.  A second Huffman
-   code codes the distance information, which follows a length code.  Each
-   length or distance code actually represents a base value and a number
-   of "extra" (sometimes zero) bits to get to add to the base value.  At
-   the end of each deflated block is a special end-of-block (EOB) literal/
-   length code.  The decoding process is basically: get a literal/length
-   code; if EOB then done; if a literal, emit the decoded byte; if a
-   length then get the distance and emit the referred-to bytes from the
-   sliding window of previously emitted data.
-
-   There are (currently) three kinds of inflate blocks: stored, fixed, and
-   dynamic.  The compressor deals with some chunk of data at a time, and
-   decides which method to use on a chunk-by-chunk basis.  A chunk might
-   typically be 32K or 64K.  If the chunk is uncompressible, then the
-   "stored" method is used.  In this case, the bytes are simply stored as
-   is, eight bits per byte, with none of the above coding.  The bytes are
-   preceded by a count, since there is no longer an EOB code.
-
-   If the data is compressible, then either the fixed or dynamic methods
-   are used.  In the dynamic method, the compressed data is preceded by
-   an encoding of the literal/length and distance Huffman codes that are
-   to be used to decode this block.  The representation is itself Huffman
-   coded, and so is preceded by a description of that code.  These code
-   descriptions take up a little space, and so for small blocks, there is
-   a predefined set of codes, called the fixed codes.  The fixed method is
-   used if the block codes up smaller that way (usually for quite small
-   chunks), otherwise the dynamic method is used.  In the latter case, the
-   codes are customized to the probabilities in the current block, and so
-   can code it much better than the pre-determined fixed codes.
- 
-   The Huffman codes themselves are decoded using a mutli-level table
-   lookup, in order to maximize the speed of decoding plus the speed of
-   building the decoding tables.  See the comments below that precede the
-   lbits and dbits tuning parameters.
- */
-
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarly, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-#ifdef RCSID
-static char rcsid[] = "$Id: inflate.c,v 1.1 1994/12/14 04:31:21 roland Exp $";
-#endif
-
-#include <sys/types.h>
-
-#include "tailor.h"
-
-#if defined(STDC_HEADERS) || !defined(NO_STDLIB_H)
-#  include <stdlib.h>
-#endif
-
-#include "gzip.h"
-#define slide window
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model).
-   Valid extra bits are 0..13.  e == 15 is EOB (end of block), e == 16
-   means that v is a literal, 16 < e < 32 means that v is a pointer to
-   the next table, which codes e - 16 bits, and lastly e == 99 indicates
-   an unused code.  If a code with e == 99 is looked up, this implies an
-   error in the data. */
-struct huft {
-  uch e;                /* number of extra bits or operation */
-  uch b;                /* number of bits in this code or subcode */
-  union {
-    ush n;              /* literal, length base, or distance base */
-    struct huft *t;     /* pointer to next level of table */
-  } v;
-};
-
-
-/* Function prototypes */
-int huft_build OF((unsigned *, unsigned, unsigned, ush *, ush *,
-                   struct huft **, int *));
-int huft_free OF((struct huft *));
-int inflate_codes OF((struct huft *, struct huft *, int, int));
-int inflate_stored OF((void));
-int inflate_fixed OF((void));
-int inflate_dynamic OF((void));
-int inflate_block OF((int *));
-int inflate OF((void));
-
-
-/* The inflate algorithm uses a sliding 32K byte window on the uncompressed
-   stream to find repeated byte strings.  This is implemented here as a
-   circular buffer.  The index is updated simply by incrementing and then
-   and'ing with 0x7fff (32K-1). */
-/* It is left to other modules to supply the 32K area.  It is assumed
-   to be usable as if it were declared "uch slide[32768];" or as just
-   "uch *slide;" and then malloc'ed in the latter case.  The definition
-   must be in unzip.h, included above. */
-/* unsigned wp;             current position in slide */
-#define wp outcnt
-#define flush_output(w) (wp=(w),flush_window())
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-static unsigned border[] = {    /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-static ush cplens[] = {         /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* note: see note #13 above about the 258 in this list. */
-static ush cplext[] = {         /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */
-static ush cpdist[] = {         /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-static ush cpdext[] = {         /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-
-
-/* Macros for inflate() bit peeking and grabbing.
-   The usage is:
-   
-        NEEDBITS(j)
-        x = b & mask_bits[j];
-        DUMPBITS(j)
-
-   where NEEDBITS makes sure that b has at least j bits in it, and
-   DUMPBITS removes the bits from b.  The macros use the variable k
-   for the number of bits in b.  Normally, b and k are register
-   variables for speed, and are initialized at the beginning of a
-   routine that uses these macros from a global bit buffer and count.
-
-   If we assume that EOB will be the longest code, then we will never
-   ask for bits with NEEDBITS that are beyond the end of the stream.
-   So, NEEDBITS should not read any more bytes than are needed to
-   meet the request.  Then no bytes need to be "returned" to the buffer
-   at the end of the last block.
-
-   However, this assumption is not true for fixed blocks--the EOB code
-   is 7 bits, but the other literal/length codes can be 8 or 9 bits.
-   (The EOB code is shorter than other codes because fixed blocks are
-   generally short.  So, while a block always has an EOB, many other
-   literal/length codes have a significantly lower probability of
-   showing up at all.)  However, by making the first table have a
-   lookup of seven bits, the EOB code will be found in that first
-   lookup, and so will not require that too many bits be pulled from
-   the stream.
- */
-
-ulg bb;                         /* bit buffer */
-unsigned bk;                    /* bits in bit buffer */
-
-ush mask_bits[] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-#ifdef CRYPT
-  uch cc;
-#  define NEXTBYTE() \
-     (decrypt ? (cc = get_byte(), zdecode(cc), cc) : get_byte())
-#else
-#  define NEXTBYTE()  (uch)get_byte()
-#endif
-#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
-#define DUMPBITS(n) {b>>=(n);k-=(n);}
-
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-int lbits = 9;          /* bits in base literal/length lookup table */
-int dbits = 6;          /* bits in base distance lookup table */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
-#define BMAX 16         /* maximum bit length of any code (16 for explode) */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-
-unsigned hufts;         /* track memory usage */
-
-
-int huft_build(b, n, s, d, e, t, m)
-unsigned *b;            /* code lengths in bits (all assumed <= BMAX) */
-unsigned n;             /* number of codes (assumed <= N_MAX) */
-unsigned s;             /* number of simple-valued codes (0..s-1) */
-ush *d;                 /* list of base values for non-simple codes */
-ush *e;                 /* list of extra bits for non-simple codes */
-struct huft **t;        /* result: starting table */
-int *m;                 /* maximum lookup bits, returns actual */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return zero on success, one if
-   the given code set is incomplete (the tables are still built in this
-   case), two if the input is invalid (all zero length codes or an
-   oversubscribed set of lengths), and three if not enough memory. */
-{
-  unsigned a;                   /* counter for codes of length k */
-  unsigned c[BMAX+1];           /* bit length count table */
-  unsigned f;                   /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register unsigned i;          /* counter, current code */
-  register unsigned j;          /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register unsigned *p;         /* pointer into c[], b[], or v[] */
-  register struct huft *q;      /* points to current table */
-  struct huft r;                /* table entry for structure assignment */
-  struct huft *u[BMAX];         /* table stack */
-  unsigned v[N_MAX];            /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  unsigned x[BMAX+1];           /* bit offsets, then code stack */
-  unsigned *xp;                 /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  unsigned z;                   /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  memzero(c, sizeof(c));
-  p = b;  i = n;
-  do {
-    Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"), 
-	    n-i, *p));
-    c[*p]++;                    /* assume all entries <= BMAX */
-    p++;                      /* Can't combine with above line (Solaris bug) */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (struct huft *)NULL;
-    *m = 0;
-    return 0;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((unsigned)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((unsigned)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return 2;                 /* bad input: more codes than bits */
-  if ((y -= c[i]) < 0)
-    return 2;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (struct huft *)NULL;   /* just to keep compilers happy */
-  q = (struct huft *)NULL;      /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (unsigned)l ? l : z;  /* upper limit on table size */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          while (++j < z)       /* try smaller tables up to z bits */
-          {
-            if ((f <<= 1) <= *++xp)
-              break;            /* enough codes to use up j bits */
-            f -= *xp;           /* else deduct codes from patterns */
-          }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (struct huft *)malloc((z + 1)*sizeof(struct huft))) ==
-            (struct huft *)NULL)
-        {
-          if (h)
-            huft_free(u[0]);
-          return 3;             /* not enough memory */
-        }
-        hufts += z + 1;         /* track memory usage */
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->v.t)) = (struct huft *)NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.b = (uch)l;         /* bits to dump before this table */
-          r.e = (uch)(16 + j);  /* bits in this table */
-          r.v.t = q;            /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.b = (uch)(k - w);
-      if (p >= v + n)
-        r.e = 99;               /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.e = (uch)(*p < 256 ? 16 : 15);    /* 256 is end-of-block code */
-        r.v.n = (ush)(*p);             /* simple code is just the value */
-	p++;                           /* one compiler does not like *p++ */
-      }
-      else
-      {
-        r.e = (uch)e[*p - s];   /* non-simple--look up in lists */
-        r.v.n = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return true (1) if we were given an incomplete table */
-  return y != 0 && g != 1;
-}
-
-
-
-int huft_free(t)
-struct huft *t;         /* table to free */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register struct huft *p, *q;
-
-
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  p = t;
-  while (p != (struct huft *)NULL)
-  {
-    q = (--p)->v.t;
-    free((char*)p);
-    p = q;
-  } 
-  return 0;
-}
-
-
-int inflate_codes(tl, td, bl, bd)
-struct huft *tl, *td;   /* literal/length and distance decoder tables */
-int bl, bd;             /* number of bits decoded by tl[] and td[] */
-/* inflate (decompress) the codes in a deflated (compressed) block.
-   Return an error code or zero if it all goes ok. */
-{
-  register unsigned e;  /* table entry flag/number of extra bits */
-  unsigned n, d;        /* length and index for copy */
-  unsigned w;           /* current window position */
-  struct huft *t;       /* pointer to table entry */
-  unsigned ml, md;      /* masks for bl and bd bits */
-  register ulg b;       /* bit buffer */
-  register unsigned k;  /* number of bits in bit buffer */
-
-
-  /* make local copies of globals */
-  b = bb;                       /* initialize bit buffer */
-  k = bk;
-  w = wp;                       /* initialize window position */
-
-  /* inflate the coded data */
-  ml = mask_bits[bl];           /* precompute masks for speed */
-  md = mask_bits[bd];
-  for (;;)                      /* do until end of block */
-  {
-    NEEDBITS((unsigned)bl)
-    if ((e = (t = tl + ((unsigned)b & ml))->e) > 16)
-      do {
-        if (e == 99)
-          return 1;
-        DUMPBITS(t->b)
-        e -= 16;
-        NEEDBITS(e)
-      } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16);
-    DUMPBITS(t->b)
-    if (e == 16)                /* then it's a literal */
-    {
-      slide[w++] = (uch)t->v.n;
-      Tracevv((stderr, "%c", slide[w-1]));
-      if (w == WSIZE)
-      {
-        flush_output(w);
-        w = 0;
-      }
-    }
-    else                        /* it's an EOB or a length */
-    {
-      /* exit if end of block */
-      if (e == 15)
-        break;
-
-      /* get length of block to copy */
-      NEEDBITS(e)
-      n = t->v.n + ((unsigned)b & mask_bits[e]);
-      DUMPBITS(e);
-
-      /* decode distance of block to copy */
-      NEEDBITS((unsigned)bd)
-      if ((e = (t = td + ((unsigned)b & md))->e) > 16)
-        do {
-          if (e == 99)
-            return 1;
-          DUMPBITS(t->b)
-          e -= 16;
-          NEEDBITS(e)
-        } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16);
-      DUMPBITS(t->b)
-      NEEDBITS(e)
-      d = w - t->v.n - ((unsigned)b & mask_bits[e]);
-      DUMPBITS(e)
-      Tracevv((stderr,"\\[%d,%d]", w-d, n));
-
-      /* do the copy */
-      do {
-        n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e);
-#if !defined(NOMEMCPY) && !defined(DEBUG)
-        if (w - d >= e)         /* (this test assumes unsigned comparison) */
-        {
-          memcpy(slide + w, slide + d, e);
-          w += e;
-          d += e;
-        }
-        else                      /* do it slow to avoid memcpy() overlap */
-#endif /* !NOMEMCPY */
-          do {
-            slide[w++] = slide[d++];
-	    Tracevv((stderr, "%c", slide[w-1]));
-          } while (--e);
-        if (w == WSIZE)
-        {
-          flush_output(w);
-          w = 0;
-        }
-      } while (n);
-    }
-  }
-
-
-  /* restore the globals from the locals */
-  wp = w;                       /* restore global window pointer */
-  bb = b;                       /* restore global bit buffer */
-  bk = k;
-
-  /* done */
-  return 0;
-}
-
-
-
-int inflate_stored()
-/* "decompress" an inflated type 0 (stored) block. */
-{
-  unsigned n;           /* number of bytes in block */
-  unsigned w;           /* current window position */
-  register ulg b;       /* bit buffer */
-  register unsigned k;  /* number of bits in bit buffer */
-
-
-  /* make local copies of globals */
-  b = bb;                       /* initialize bit buffer */
-  k = bk;
-  w = wp;                       /* initialize window position */
-
-
-  /* go to byte boundary */
-  n = k & 7;
-  DUMPBITS(n);
-
-
-  /* get the length and its complement */
-  NEEDBITS(16)
-  n = ((unsigned)b & 0xffff);
-  DUMPBITS(16)
-  NEEDBITS(16)
-  if (n != (unsigned)((~b) & 0xffff))
-    return 1;                   /* error in compressed data */
-  DUMPBITS(16)
-
-
-  /* read and output the compressed data */
-  while (n--)
-  {
-    NEEDBITS(8)
-    slide[w++] = (uch)b;
-    if (w == WSIZE)
-    {
-      flush_output(w);
-      w = 0;
-    }
-    DUMPBITS(8)
-  }
-
-
-  /* restore the globals from the locals */
-  wp = w;                       /* restore global window pointer */
-  bb = b;                       /* restore global bit buffer */
-  bk = k;
-  return 0;
-}
-
-
-
-int inflate_fixed()
-/* decompress an inflated type 1 (fixed Huffman codes) block.  We should
-   either replace this with a custom decoder, or at least precompute the
-   Huffman tables. */
-{
-  int i;                /* temporary variable */
-  struct huft *tl;      /* literal/length code table */
-  struct huft *td;      /* distance code table */
-  int bl;               /* lookup bits for tl */
-  int bd;               /* lookup bits for td */
-  unsigned l[288];      /* length list for huft_build */
-
-
-  /* set up literal table */
-  for (i = 0; i < 144; i++)
-    l[i] = 8;
-  for (; i < 256; i++)
-    l[i] = 9;
-  for (; i < 280; i++)
-    l[i] = 7;
-  for (; i < 288; i++)          /* make a complete, but wrong code set */
-    l[i] = 8;
-  bl = 7;
-  if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0)
-    return i;
-
-
-  /* set up distance table */
-  for (i = 0; i < 30; i++)      /* make an incomplete code set */
-    l[i] = 5;
-  bd = 5;
-  if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1)
-  {
-    huft_free(tl);
-    return i;
-  }
-
-
-  /* decompress until an end-of-block code */
-  if (inflate_codes(tl, td, bl, bd))
-    return 1;
-
-
-  /* free the decoding tables, return */
-  huft_free(tl);
-  huft_free(td);
-  return 0;
-}
-
-
-
-int inflate_dynamic()
-/* decompress an inflated type 2 (dynamic Huffman codes) block. */
-{
-  int i;                /* temporary variables */
-  unsigned j;
-  unsigned l;           /* last length */
-  unsigned m;           /* mask for bit lengths table */
-  unsigned n;           /* number of lengths to get */
-  struct huft *tl;      /* literal/length code table */
-  struct huft *td;      /* distance code table */
-  int bl;               /* lookup bits for tl */
-  int bd;               /* lookup bits for td */
-  unsigned nb;          /* number of bit length codes */
-  unsigned nl;          /* number of literal/length codes */
-  unsigned nd;          /* number of distance codes */
-#ifdef PKZIP_BUG_WORKAROUND
-  unsigned ll[288+32];  /* literal/length and distance code lengths */
-#else
-  unsigned ll[286+30];  /* literal/length and distance code lengths */
-#endif
-  register ulg b;       /* bit buffer */
-  register unsigned k;  /* number of bits in bit buffer */
-
-
-  /* make local bit buffer */
-  b = bb;
-  k = bk;
-
-
-  /* read in table lengths */
-  NEEDBITS(5)
-  nl = 257 + ((unsigned)b & 0x1f);      /* number of literal/length codes */
-  DUMPBITS(5)
-  NEEDBITS(5)
-  nd = 1 + ((unsigned)b & 0x1f);        /* number of distance codes */
-  DUMPBITS(5)
-  NEEDBITS(4)
-  nb = 4 + ((unsigned)b & 0xf);         /* number of bit length codes */
-  DUMPBITS(4)
-#ifdef PKZIP_BUG_WORKAROUND
-  if (nl > 288 || nd > 32)
-#else
-  if (nl > 286 || nd > 30)
-#endif
-    return 1;                   /* bad lengths */
-
-
-  /* read in bit-length-code lengths */
-  for (j = 0; j < nb; j++)
-  {
-    NEEDBITS(3)
-    ll[border[j]] = (unsigned)b & 7;
-    DUMPBITS(3)
-  }
-  for (; j < 19; j++)
-    ll[border[j]] = 0;
-
-
-  /* build decoding table for trees--single level, 7 bit lookup */
-  bl = 7;
-  if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0)
-  {
-    if (i == 1)
-      huft_free(tl);
-    return i;                   /* incomplete code set */
-  }
-
-
-  /* read in literal and distance code lengths */
-  n = nl + nd;
-  m = mask_bits[bl];
-  i = l = 0;
-  while ((unsigned)i < n)
-  {
-    NEEDBITS((unsigned)bl)
-    j = (td = tl + ((unsigned)b & m))->b;
-    DUMPBITS(j)
-    j = td->v.n;
-    if (j < 16)                 /* length of code in bits (0..15) */
-      ll[i++] = l = j;          /* save last length in l */
-    else if (j == 16)           /* repeat last length 3 to 6 times */
-    {
-      NEEDBITS(2)
-      j = 3 + ((unsigned)b & 3);
-      DUMPBITS(2)
-      if ((unsigned)i + j > n)
-        return 1;
-      while (j--)
-        ll[i++] = l;
-    }
-    else if (j == 17)           /* 3 to 10 zero length codes */
-    {
-      NEEDBITS(3)
-      j = 3 + ((unsigned)b & 7);
-      DUMPBITS(3)
-      if ((unsigned)i + j > n)
-        return 1;
-      while (j--)
-        ll[i++] = 0;
-      l = 0;
-    }
-    else                        /* j == 18: 11 to 138 zero length codes */
-    {
-      NEEDBITS(7)
-      j = 11 + ((unsigned)b & 0x7f);
-      DUMPBITS(7)
-      if ((unsigned)i + j > n)
-        return 1;
-      while (j--)
-        ll[i++] = 0;
-      l = 0;
-    }
-  }
-
-
-  /* free decoding table for trees */
-  huft_free(tl);
-
-
-  /* restore the global bit buffer */
-  bb = b;
-  bk = k;
-
-
-  /* build the decoding tables for literal/length and distance codes */
-  bl = lbits;
-  if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0)
-  {
-    if (i == 1) {
-      fprintf(stderr, " incomplete literal tree\n");
-      huft_free(tl);
-    }
-    return i;                   /* incomplete code set */
-  }
-  bd = dbits;
-  if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0)
-  {
-    if (i == 1) {
-      fprintf(stderr, " incomplete distance tree\n");
-#ifdef PKZIP_BUG_WORKAROUND
-      i = 0;
-    }
-#else
-      huft_free(td);
-    }
-    huft_free(tl);
-    return i;                   /* incomplete code set */
-#endif
-  }
-
-
-  /* decompress until an end-of-block code */
-  if (inflate_codes(tl, td, bl, bd))
-    return 1;
-
-
-  /* free the decoding tables, return */
-  huft_free(tl);
-  huft_free(td);
-  return 0;
-}
-
-
-
-int inflate_block(e)
-int *e;                 /* last block flag */
-/* decompress an inflated block */
-{
-  unsigned t;           /* block type */
-  register ulg b;       /* bit buffer */
-  register unsigned k;  /* number of bits in bit buffer */
-
-
-  /* make local bit buffer */
-  b = bb;
-  k = bk;
-
-
-  /* read in last block bit */
-  NEEDBITS(1)
-  *e = (int)b & 1;
-  DUMPBITS(1)
-
-
-  /* read in block type */
-  NEEDBITS(2)
-  t = (unsigned)b & 3;
-  DUMPBITS(2)
-
-
-  /* restore the global bit buffer */
-  bb = b;
-  bk = k;
-
-
-  /* inflate that block type */
-  if (t == 2)
-    return inflate_dynamic();
-  if (t == 0)
-    return inflate_stored();
-  if (t == 1)
-    return inflate_fixed();
-
-
-  /* bad block type */
-  return 2;
-}
-
-
-
-int inflate()
-/* decompress an inflated entry */
-{
-  int e;                /* last block flag */
-  int r;                /* result code */
-  unsigned h;           /* maximum struct huft's malloc'ed */
-
-
-  /* initialize window, bit buffer */
-  wp = 0;
-  bk = 0;
-  bb = 0;
-
-
-  /* decompress until the last block */
-  h = 0;
-  do {
-    hufts = 0;
-    if ((r = inflate_block(&e)) != 0)
-      return r;
-    if (hufts > h)
-      h = hufts;
-  } while (!e);
-
-  /* Undo too much lookahead. The next read will be byte aligned so we
-   * can discard unused bits in the last meaningful byte.
-   */
-  while (bk >= 8) {
-    bk -= 8;
-    inptr--;
-  }
-
-  /* flush out slide */
-  flush_output(wp);
-
-
-  /* return success */
-#ifdef DEBUG
-  fprintf(stderr, "<%u> ", h);
-#endif /* DEBUG */
-  return 0;
-}
diff --git a/libstore/tailor.h b/libstore/tailor.h
deleted file mode 100644
index d207af55..00000000
--- a/libstore/tailor.h
+++ /dev/null
@@ -1,14 +0,0 @@
-
-#ifndef get_char
-#  define get_char() get_byte()
-#endif
-
-#ifndef put_char
-#  define put_char(c) put_byte(c)
-#endif
-
-#include <stdio.h>
-#define fprintf(stream, fmt...) /* ignore useless error msgs */ ((void)0)
-
-void (*unzip_error) (const char *msg);
-#define error(msg) (*unzip_error) (msg)
diff --git a/libstore/unzip.c b/libstore/unzip.c
deleted file mode 100644
index d0f5bf11..00000000
--- a/libstore/unzip.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* unzip.c -- decompress files in gzip or pkzip format.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- *
- * The code in this file is derived from the file funzip.c written
- * and put in the public domain by Mark Adler.
- */
-
-/*
-   This version can extract files in gzip or pkzip format.
-   For the latter, only the first entry is extracted, and it has to be
-   either deflated or stored.
- */
-
-#ifdef RCSID
-static char rcsid[] = "$Id: unzip.c,v 1.1 1994/12/14 04:30:25 roland Exp $";
-#endif
-
-#include "tailor.h"
-#include "gzip.h"
-#include "crypt.h"
-
-/* PKZIP header definitions */
-#define LOCSIG 0x04034b50L      /* four-byte lead-in (lsb first) */
-#define LOCFLG 6                /* offset of bit flag */
-#define  CRPFLG 1               /*  bit for encrypted entry */
-#define  EXTFLG 8               /*  bit for extended local header */
-#define LOCHOW 8                /* offset of compression method */
-#define LOCTIM 10               /* file mod time (for decryption) */
-#define LOCCRC 14               /* offset of crc */
-#define LOCSIZ 18               /* offset of compressed size */
-#define LOCLEN 22               /* offset of uncompressed length */
-#define LOCFIL 26               /* offset of file name field length */
-#define LOCEXT 28               /* offset of extra field length */
-#define LOCHDR 30               /* size of local header, including sig */
-#define EXTHDR 16               /* size of extended local header, inc sig */
-
-
-/* Globals */
-
-int decrypt;        /* flag to turn on decryption */
-char *key;          /* not used--needed to link crypt.c */
-int pkzip = 0;      /* set for a pkzip file */
-int ext_header = 0; /* set if extended local header */
-
-/* ===========================================================================
- * Check zip file and advance inptr to the start of the compressed data.
- * Get ofname from the local header if necessary.
- */
-int check_zipfile(in)
-    int in;   /* input file descriptors */
-{
-    uch *h = inbuf + inptr; /* first local header */
-
-    ifd = in;
-
-    /* Check validity of local header, and skip name and extra fields */
-    inptr += LOCHDR + SH(h + LOCFIL) + SH(h + LOCEXT);
-
-    if (inptr > insize || LG(h) != LOCSIG) {
-	fprintf(stderr, "\n%s: %s: not a valid zip file\n",
-		progname, ifname);
-	exit_code = ERROR;
-	return ERROR;
-    }
-    method = h[LOCHOW];
-    if (method != STORED && method != DEFLATED) {
-	fprintf(stderr,
-		"\n%s: %s: first entry not deflated or stored -- use unzip\n",
-		progname, ifname);
-	exit_code = ERROR;
-	return ERROR;
-    }
-
-    /* If entry encrypted, decrypt and validate encryption header */
-    if ((decrypt = h[LOCFLG] & CRPFLG) != 0) {
-	fprintf(stderr, "\n%s: %s: encrypted file -- use unzip\n",
-		progname, ifname);
-	exit_code = ERROR;
-	return ERROR;
-    }
-
-    /* Save flags for unzip() */
-    ext_header = (h[LOCFLG] & EXTFLG) != 0;
-    pkzip = 1;
-
-    /* Get ofname and time stamp from local header (to be done) */
-    return OK;
-}
-
-/* ===========================================================================
- * Unzip in to out.  This routine works on both gzip and pkzip files.
- *
- * IN assertions: the buffer inbuf contains already the beginning of
- *   the compressed data, from offsets inptr to insize-1 included.
- *   The magic header has already been checked. The output buffer is cleared.
- */
-int unzip(in, out)
-    int in, out;   /* input and output file descriptors */
-{
-    ulg orig_crc = 0;       /* original crc */
-    ulg orig_len = 0;       /* original uncompressed length */
-    int n;
-    uch buf[EXTHDR];        /* extended local header */
-
-    ifd = in;
-    ofd = out;
-
-    updcrc(NULL, 0);           /* initialize crc */
-
-    if (pkzip && !ext_header) {  /* crc and length at the end otherwise */
-	orig_crc = LG(inbuf + LOCCRC);
-	orig_len = LG(inbuf + LOCLEN);
-    }
-
-    /* Decompress */
-    if (method == DEFLATED)  {
-
-	int res = inflate();
-
-	if (res == 3) {
-	    error("out of memory");
-	} else if (res != 0) {
-	    error("invalid compressed data--format violated");
-	}
-
-    } else if (pkzip && method == STORED) {
-
-	register ulg n = LG(inbuf + LOCLEN);
-
-	if (n != LG(inbuf + LOCSIZ) - (decrypt ? RAND_HEAD_LEN : 0)) {
-
-	    fprintf(stderr, "len %ld, siz %ld\n", n, LG(inbuf + LOCSIZ));
-	    error("invalid compressed data--length mismatch");
-	}
-	while (n--) {
-	    uch c = (uch)get_byte();
-#ifdef CRYPT
-	    if (decrypt) zdecode(c);
-#endif
-	    put_ubyte(c);
-	}
-	flush_window();
-    } else {
-	error("internal error, invalid method");
-    }
-
-    /* Get the crc and original length */
-    if (!pkzip) {
-        /* crc32  (see algorithm.doc)
-	 * uncompressed input size modulo 2^32
-         */
-	for (n = 0; n < 8; n++) {
-	    buf[n] = (uch)get_byte(); /* may cause an error if EOF */
-	}
-	orig_crc = LG(buf);
-	orig_len = LG(buf+4);
-
-    } else if (ext_header) {  /* If extended header, check it */
-	/* signature - 4bytes: 0x50 0x4b 0x07 0x08
-	 * CRC-32 value
-         * compressed size 4-bytes
-         * uncompressed size 4-bytes
-	 */
-	for (n = 0; n < EXTHDR; n++) {
-	    buf[n] = (uch)get_byte(); /* may cause an error if EOF */
-	}
-	orig_crc = LG(buf+4);
-	orig_len = LG(buf+12);
-    }
-
-    /* Validate decompression */
-    if (orig_crc != updcrc(outbuf, 0)) {
-	error("invalid compressed data--crc error");
-    }
-    if (orig_len != (ulg)bytes_out) {
-	error("invalid compressed data--length error");
-    }
-
-    /* Check if there are more entries in a pkzip file */
-    if (pkzip && inptr + 4 < insize && LG(inbuf+inptr) == LOCSIG) {
-	if (to_stdout) {
-	    WARN((stderr,
-		  "%s: %s has more than one entry--rest ignored\n",
-		  progname, ifname));
-	} else {
-	    /* Don't destroy the input zip file */
-	    fprintf(stderr,
-		    "%s: %s has more than one entry -- unchanged\n",
-		    progname, ifname);
-	    exit_code = ERROR;
-	    ext_header = pkzip = 0;
-	    return ERROR;
-	}
-    }
-    ext_header = pkzip = 0; /* for next file */
-    return OK;
-}
diff --git a/libstore/util.c b/libstore/util.c
index 598586f5..59085241 100644
--- a/libstore/util.c
+++ b/libstore/util.c
@@ -10,263 +10,10 @@
 static char rcsid[] = "$Id: util.c,v 1.1 1994/12/14 04:29:37 roland Exp $";
 #endif
 
-#include <ctype.h>
-#include <errno.h>
-#include <sys/types.h>
-
-#include "tailor.h"
-
-#ifdef HAVE_UNISTD_H
-#  include <unistd.h>
-#endif
-#ifndef NO_FCNTL_H
-#  include <fcntl.h>
-#endif
-
-#if defined(STDC_HEADERS) || !defined(NO_STDLIB_H)
-#  include <stdlib.h>
-#else
-   extern int errno;
-#endif
-
-#include "gzip.h"
-#include "crypt.h"
-
-/* cruft */
-int ifd, ofd;
-int to_stdout=1,quiet=1;
+#include <stddef.h>
 
 /* I/O interface */
 int (*unzip_read) (char *buf, size_t maxread);
 void (*unzip_write) (const char *buf, size_t nwrite);
-#define read_error() (*unzip_read_error) ()
 void (*unzip_read_error) (void);
-
-
-extern ulg crc_32_tab[];   /* crc table, defined below */
-
-int exit_code = OK;   /* program exit code */
-int method = DEFLATED;/* compression method */
-unsigned insize;           /* valid bytes in inbuf */
-unsigned inptr;            /* index of next byte to be processed in inbuf */
-unsigned outcnt;           /* bytes in output buffer */
-DECLARE(uch, inbuf,  INBUFSIZ +INBUF_EXTRA);
-DECLARE(uch, outbuf, OUTBUFSIZ+OUTBUF_EXTRA);
-DECLARE(uch, window, 2L*WSIZE);
-
-
-/* This function stolen from gzip.c. */
-/* ========================================================================
- * Check the magic number of the input file and update ofname if an
- * original name was given and to_stdout is not set.
- * Return the compression method, -1 for error, -2 for warning.
- * Set inptr to the offset of the next byte to be processed.
- * Updates time_stamp if there is one and --no-time is not used.
- * This function may be called repeatedly for an input file consisting
- * of several contiguous gzip'ed members.
- * IN assertions: there is at least one remaining compressed member.
- *   If the member is a zip file, it must be the only one.
- */
-int get_method(in)
-    int in;        /* input file descriptor */
-{
-    uch flags;     /* compression flags */
-    char magic[2]; /* magic header */
-    ulg stamp;     /* time stamp */
-
-    /* Prime the input buffer.  */
-    fill_inbuf(0);
-    inptr = 0;
-
-    magic[0] = (char)get_byte();
-    magic[1] = (char)get_byte();
-
-    method = -1;                 /* unknown yet */
-
-    if (memcmp(magic, GZIP_MAGIC, 2) == 0
-        || memcmp(magic, OLD_GZIP_MAGIC, 2) == 0) {
-
-	method = (int)get_byte();
-	if (method != DEFLATED)
-	  return -1;
-
-	flags  = (uch)get_byte();
-	if ((flags & ENCRYPTED) != 0) return -1;
-	if ((flags & CONTINUATION) != 0) return -1;
-	if ((flags & RESERVED) != 0) return -1;
-
-	stamp  = (ulg)get_byte();
-	stamp |= ((ulg)get_byte()) << 8;
-	stamp |= ((ulg)get_byte()) << 16;
-	stamp |= ((ulg)get_byte()) << 24;
-
-	(void)get_byte();  /* Ignore extra flags for the moment */
-	(void)get_byte();  /* Ignore OS type for the moment */
-
-	if ((flags & CONTINUATION) != 0) {
-	    unsigned part = (unsigned)get_byte();
-	    part |= ((unsigned)get_byte())<<8;
-	}
-	if ((flags & EXTRA_FIELD) != 0) {
-	    unsigned len = (unsigned)get_byte();
-	    len |= ((unsigned)get_byte())<<8;
-	    while (len--) (void)get_byte();
-	}
-
-	/* Get original file name if it was truncated */
-	if ((flags & ORIG_NAME) != 0) {
-	  /* Discard the old name */
-	  char c; /* dummy used for NeXTstep 3.0 cc optimizer bug */
-	  do {c=get_byte();} while (c != 0);
-	} 
-
-	/* Discard file comment if any */
-	if ((flags & COMMENT) != 0) {
-	    while (get_char() != 0) /* null */ ;
-	}
-    } else if (memcmp(magic, PKZIP_MAGIC, 2) == 0 && inptr == 2
-	    && memcmp((char*)inbuf, PKZIP_MAGIC, 4) == 0) {
-      /* To simplify the code, we support a zip file when alone only.
-       * We are thus guaranteed that the entire local header fits in inbuf.
-       */
-      inptr = 0;
-      if (check_zipfile(in) == OK) return 0;
-    }
-
-    return method != DEFLATED;
-}
-
-
-/* ===========================================================================
- * Run a set of bytes through the crc shift register.  If s is a NULL
- * pointer, then initialize the crc shift register contents instead.
- * Return the current crc in either case.
- */
-ulg updcrc(s, n)
-    uch *s;                 /* pointer to bytes to pump through */
-    unsigned n;             /* number of bytes in s[] */
-{
-    register ulg c;         /* temporary variable */
-
-    static ulg crc = (ulg)0xffffffffL; /* shift register contents */
-
-    if (s == NULL) {
-	c = 0xffffffffL;
-    } else {
-	c = crc;
-        if (n) do {
-            c = crc_32_tab[((int)c ^ (*s++)) & 0xff] ^ (c >> 8);
-        } while (--n);
-    }
-    crc = c;
-    return c ^ 0xffffffffL;       /* (instead of ~c for 64-bit machines) */
-}
-
-/* ===========================================================================
- * Clear input and output buffers
- */
-void clear_bufs()
-{
-    outcnt = 0;
-    insize = inptr = 0;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty.
- */
-int fill_inbuf(eof_ok)
-    int eof_ok;          /* set if EOF acceptable as a result */
-{
-    int len;
-
-    /* Read as much as possible */
-    insize = 0;
-    do {
-	len = (*unzip_read)((char*)inbuf+insize, INBUFSIZ-insize);
-        if (len == 0 || len == EOF) break;
-	insize += len;
-    } while (insize < INBUFSIZ);
-
-    if (insize == 0) {
-	if (eof_ok) return EOF;
-	read_error();
-    }
-
-    inptr = 1;
-    return inbuf[0];
-}
-
-long int bytes_out;
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window()
-{
-    if (outcnt == 0) return;
-    updcrc(window, outcnt);
-
-    (*unzip_write) ((char *) window, outcnt);
-    bytes_out += outcnt;
-
-    outcnt = 0;
-}
-
-/* ========================================================================
- * Table of CRC-32's of all single-byte values (made by makecrc.c)
- */
-ulg crc_32_tab[] = {
-  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-  0x2d02ef8dL
-};
+void (*unzip_error) (const char *msg);