1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
|
/* 8390.c: A general NS8390 ethernet driver core for linux. */
/*
Written 1992-94 by Donald Becker.
Copyright 1993 United States Government as represented by the
Director, National Security Agency.
This software may be used and distributed according to the terms
of the GNU Public License, incorporated herein by reference.
The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
Center of Excellence in Space Data and Information Sciences
Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
This is the chip-specific code for many 8390-based ethernet adaptors.
This is not a complete driver, it must be combined with board-specific
code such as ne.c, wd.c, 3c503.c, etc.
Changelog:
Paul Gortmaker : remove set_bit lock, other cleanups.
Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to
ei_block_input() for eth_io_copy_and_sum().
*/
static const char *version =
"8390.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
/*
Braindamage remaining:
Much of this code should have been cleaned up, but every attempt
has broken some clone part.
Sources:
The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/string.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include "8390.h"
/* These are the operational function interfaces to board-specific
routines.
void reset_8390(struct device *dev)
Resets the board associated with DEV, including a hardware reset of
the 8390. This is only called when there is a transmit timeout, and
it is always followed by 8390_init().
void block_output(struct device *dev, int count, const unsigned char *buf,
int start_page)
Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The
"page" value uses the 8390's 256-byte pages.
void get_8390_hdr(struct device *dev, struct e8390_hdr *hdr, int ring_page)
Read the 4 byte, page aligned 8390 header. *If* there is a
subsequent read, it will be of the rest of the packet.
void block_input(struct device *dev, int count, struct sk_buff *skb, int ring_offset)
Read COUNT bytes from the packet buffer into the skb data area. Start
reading from RING_OFFSET, the address as the 8390 sees it. This will always
follow the read of the 8390 header.
*/
#define ei_reset_8390 (ei_local->reset_8390)
#define ei_block_output (ei_local->block_output)
#define ei_block_input (ei_local->block_input)
#define ei_get_8390_hdr (ei_local->get_8390_hdr)
/* use 0 for production, 1 for verification, >2 for debug */
#ifdef EI_DEBUG
int ei_debug = EI_DEBUG;
#else
int ei_debug = 1;
#endif
#ifdef EI_PINGPONG
static int ei_pingpong = 1;
#else
static int ei_pingpong = 0;
#endif
/* Max number of packets received at one Intr.
Currently this may only be examined by a kernel debugger. */
static int high_water_mark = 0;
/* Index to functions. */
static void ei_tx_intr(struct device *dev);
static void ei_receive(struct device *dev);
static void ei_rx_overrun(struct device *dev);
/* Routines generic to NS8390-based boards. */
static void NS8390_trigger_send(struct device *dev, unsigned int length,
int start_page);
static void set_multicast_list(struct device *dev);
/* Open/initialize the board. This routine goes all-out, setting everything
up anew at each open, even though many of these registers should only
need to be set once at boot.
*/
int ei_open(struct device *dev)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
/* This can't happen unless somebody forgot to call ethdev_init(). */
if (ei_local == NULL) {
printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
return -ENXIO;
}
irq2dev_map[dev->irq] = dev;
NS8390_init(dev, 1);
dev->start = 1;
ei_local->irqlock = 0;
return 0;
}
/* Opposite of above. Only used when "ifconfig <devname> down" is done. */
int ei_close(struct device *dev)
{
NS8390_init(dev, 0);
dev->start = 0;
return 0;
}
static int ei_start_xmit(struct sk_buff *skb, struct device *dev)
{
int e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
int length, send_length;
/*
* We normally shouldn't be called if dev->tbusy is set, but the
* existing code does anyway. If it has been too long since the
* last Tx, we assume the board has died and kick it.
*/
if (dev->tbusy) { /* Do timeouts, just like the 8003 driver. */
int txsr = inb(e8390_base+EN0_TSR), isr;
int tickssofar = jiffies - dev->trans_start;
if (tickssofar < TX_TIMEOUT || (tickssofar < (TX_TIMEOUT+5) && ! (txsr & ENTSR_PTX))) {
return 1;
}
isr = inb(e8390_base+EN0_ISR);
if (dev->start == 0) {
printk("%s: xmit on stopped card\n", dev->name);
return 1;
}
printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
dev->name, (txsr & ENTSR_ABT) ? "excess collisions." :
(isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar);
if (!isr && !ei_local->stat.tx_packets) {
/* The 8390 probably hasn't gotten on the cable yet. */
ei_local->interface_num ^= 1; /* Try a different xcvr. */
}
/* Try to restart the card. Perhaps the user has fixed something. */
ei_reset_8390(dev);
NS8390_init(dev, 1);
dev->trans_start = jiffies;
}
/* Sending a NULL skb means some higher layer thinks we've missed an
tx-done interrupt. Caution: dev_tint() handles the cli()/sti()
itself. */
if (skb == NULL) {
dev_tint(dev);
return 0;
}
length = skb->len;
if (skb->len <= 0)
return 0;
/* Mask interrupts from the ethercard. */
outb_p(0x00, e8390_base + EN0_IMR);
if (dev->interrupt) {
printk("%s: Tx request while isr active.\n",dev->name);
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
return 1;
}
ei_local->irqlock = 1;
send_length = ETH_ZLEN < length ? length : ETH_ZLEN;
if (ei_local->pingpong) {
int output_page;
if (ei_local->tx1 == 0) {
output_page = ei_local->tx_start_page;
ei_local->tx1 = send_length;
if (ei_debug && ei_local->tx2 > 0)
printk("%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n",
dev->name, ei_local->tx2, ei_local->lasttx,
ei_local->txing);
} else if (ei_local->tx2 == 0) {
output_page = ei_local->tx_start_page + 6;
ei_local->tx2 = send_length;
if (ei_debug && ei_local->tx1 > 0)
printk("%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
dev->name, ei_local->tx1, ei_local->lasttx,
ei_local->txing);
} else { /* We should never get here. */
if (ei_debug)
printk("%s: No Tx buffers free. irq=%d tx1=%d tx2=%d last=%d\n",
dev->name, dev->interrupt, ei_local->tx1,
ei_local->tx2, ei_local->lasttx);
ei_local->irqlock = 0;
dev->tbusy = 1;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
return 1;
}
ei_block_output(dev, length, skb->data, output_page);
if (! ei_local->txing) {
ei_local->txing = 1;
NS8390_trigger_send(dev, send_length, output_page);
dev->trans_start = jiffies;
if (output_page == ei_local->tx_start_page)
ei_local->tx1 = -1, ei_local->lasttx = -1;
else
ei_local->tx2 = -1, ei_local->lasttx = -2;
} else
ei_local->txqueue++;
dev->tbusy = (ei_local->tx1 && ei_local->tx2);
} else { /* No pingpong, just a single Tx buffer. */
ei_block_output(dev, length, skb->data, ei_local->tx_start_page);
ei_local->txing = 1;
NS8390_trigger_send(dev, send_length, ei_local->tx_start_page);
dev->trans_start = jiffies;
dev->tbusy = 1;
}
/* Turn 8390 interrupts back on. */
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
dev_kfree_skb (skb, FREE_WRITE);
return 0;
}
/* The typical workload of the driver:
Handle the ether interface interrupts. */
void ei_interrupt(int irq, struct pt_regs * regs)
{
struct device *dev = (struct device *)(irq2dev_map[irq]);
int e8390_base;
int interrupts, nr_serviced = 0;
struct ei_device *ei_local;
if (dev == NULL) {
printk ("net_interrupt(): irq %d for unknown device.\n", irq);
return;
}
e8390_base = dev->base_addr;
ei_local = (struct ei_device *) dev->priv;
if (dev->interrupt || ei_local->irqlock) {
/* The "irqlock" check is only for testing. */
printk(ei_local->irqlock
? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n"
: "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n",
dev->name, inb_p(e8390_base + EN0_ISR),
inb_p(e8390_base + EN0_IMR));
return;
}
dev->interrupt = 1;
/* Change to page 0 and read the intr status reg. */
outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD);
if (ei_debug > 3)
printk("%s: interrupt(isr=%#2.2x).\n", dev->name,
inb_p(e8390_base + EN0_ISR));
/* !!Assumption!! -- we stay in page 0. Don't break this. */
while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0
&& ++nr_serviced < MAX_SERVICE) {
if (dev->start == 0) {
printk("%s: interrupt from stopped card\n", dev->name);
interrupts = 0;
break;
}
if (interrupts & ENISR_OVER) {
ei_rx_overrun(dev);
} else if (interrupts & (ENISR_RX+ENISR_RX_ERR)) {
/* Got a good (?) packet. */
ei_receive(dev);
}
/* Push the next to-transmit packet through. */
if (interrupts & ENISR_TX) {
ei_tx_intr(dev);
} else if (interrupts & ENISR_COUNTERS) {
ei_local->stat.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0);
ei_local->stat.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1);
ei_local->stat.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2);
outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */
}
/* Ignore the transmit errs and reset intr for now. */
if (interrupts & ENISR_TX_ERR) {
outb_p(ENISR_TX_ERR, e8390_base + EN0_ISR); /* Ack intr. */
}
/* Ignore any RDC interrupts that make it back to here. */
if (interrupts & ENISR_RDC) {
outb_p(ENISR_RDC, e8390_base + EN0_ISR);
}
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD);
}
if (interrupts && ei_debug) {
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD);
if (nr_serviced >= MAX_SERVICE) {
printk("%s: Too much work at interrupt, status %#2.2x\n",
dev->name, interrupts);
outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */
} else {
printk("%s: unknown interrupt %#2x\n", dev->name, interrupts);
outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */
}
}
dev->interrupt = 0;
return;
}
/* We have finished a transmit: check for errors and then trigger the next
packet to be sent. */
static void ei_tx_intr(struct device *dev)
{
int e8390_base = dev->base_addr;
int status = inb(e8390_base + EN0_TSR);
struct ei_device *ei_local = (struct ei_device *) dev->priv;
outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */
if (ei_local->pingpong) {
ei_local->txqueue--;
if (ei_local->tx1 < 0) {
if (ei_local->lasttx != 1 && ei_local->lasttx != -1)
printk("%s: bogus last_tx_buffer %d, tx1=%d.\n",
ei_local->name, ei_local->lasttx, ei_local->tx1);
ei_local->tx1 = 0;
dev->tbusy = 0;
if (ei_local->tx2 > 0) {
ei_local->txing = 1;
NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
dev->trans_start = jiffies;
ei_local->tx2 = -1,
ei_local->lasttx = 2;
} else
ei_local->lasttx = 20, ei_local->txing = 0;
} else if (ei_local->tx2 < 0) {
if (ei_local->lasttx != 2 && ei_local->lasttx != -2)
printk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
ei_local->name, ei_local->lasttx, ei_local->tx2);
ei_local->tx2 = 0;
dev->tbusy = 0;
if (ei_local->tx1 > 0) {
ei_local->txing = 1;
NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page);
dev->trans_start = jiffies;
ei_local->tx1 = -1;
ei_local->lasttx = 1;
} else
ei_local->lasttx = 10, ei_local->txing = 0;
} else
printk("%s: unexpected TX-done interrupt, lasttx=%d.\n",
dev->name, ei_local->lasttx);
} else {
ei_local->txing = 0;
dev->tbusy = 0;
}
/* Minimize Tx latency: update the statistics after we restart TXing. */
if (status & ENTSR_COL) ei_local->stat.collisions++;
if (status & ENTSR_PTX)
ei_local->stat.tx_packets++;
else {
ei_local->stat.tx_errors++;
if (status & ENTSR_ABT) ei_local->stat.tx_aborted_errors++;
if (status & ENTSR_CRS) ei_local->stat.tx_carrier_errors++;
if (status & ENTSR_FU) ei_local->stat.tx_fifo_errors++;
if (status & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++;
if (status & ENTSR_OWC) ei_local->stat.tx_window_errors++;
}
mark_bh (NET_BH);
}
/* We have a good packet(s), get it/them out of the buffers. */
static void ei_receive(struct device *dev)
{
int e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
int rxing_page, this_frame, next_frame, current_offset;
int rx_pkt_count = 0;
struct e8390_pkt_hdr rx_frame;
int num_rx_pages = ei_local->stop_page-ei_local->rx_start_page;
while (++rx_pkt_count < 10) {
int pkt_len;
/* Get the rx page (incoming packet pointer). */
outb_p(E8390_NODMA+E8390_PAGE1, e8390_base + E8390_CMD);
rxing_page = inb_p(e8390_base + EN1_CURPAG);
outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD);
/* Remove one frame from the ring. Boundary is always a page behind. */
this_frame = inb_p(e8390_base + EN0_BOUNDARY) + 1;
if (this_frame >= ei_local->stop_page)
this_frame = ei_local->rx_start_page;
/* Someday we'll omit the previous, iff we never get this message.
(There is at least one clone claimed to have a problem.) */
if (ei_debug > 0 && this_frame != ei_local->current_page)
printk("%s: mismatched read page pointers %2x vs %2x.\n",
dev->name, this_frame, ei_local->current_page);
if (this_frame == rxing_page) /* Read all the frames? */
break; /* Done for now */
current_offset = this_frame << 8;
ei_get_8390_hdr(dev, &rx_frame, this_frame);
pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr);
next_frame = this_frame + 1 + ((pkt_len+4)>>8);
/* Check for bogosity warned by 3c503 book: the status byte is never
written. This happened a lot during testing! This code should be
cleaned up someday. */
if (rx_frame.next != next_frame
&& rx_frame.next != next_frame + 1
&& rx_frame.next != next_frame - num_rx_pages
&& rx_frame.next != next_frame + 1 - num_rx_pages) {
ei_local->current_page = rxing_page;
outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY);
ei_local->stat.rx_errors++;
continue;
}
if (pkt_len < 60 || pkt_len > 1518) {
if (ei_debug)
printk("%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n",
dev->name, rx_frame.count, rx_frame.status,
rx_frame.next);
ei_local->stat.rx_errors++;
} else if ((rx_frame.status & 0x0F) == ENRSR_RXOK) {
struct sk_buff *skb;
skb = dev_alloc_skb(pkt_len+2);
if (skb == NULL) {
if (ei_debug > 1)
printk("%s: Couldn't allocate a sk_buff of size %d.\n",
dev->name, pkt_len);
ei_local->stat.rx_dropped++;
break;
} else {
skb_reserve(skb,2); /* IP headers on 16 byte boundaries */
skb->dev = dev;
skb_put(skb, pkt_len); /* Make room */
ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame));
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
ei_local->stat.rx_packets++;
}
} else {
int errs = rx_frame.status;
if (ei_debug)
printk("%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n",
dev->name, rx_frame.status, rx_frame.next,
rx_frame.count);
if (errs & ENRSR_FO)
ei_local->stat.rx_fifo_errors++;
}
next_frame = rx_frame.next;
/* This _should_ never happen: it's here for avoiding bad clones. */
if (next_frame >= ei_local->stop_page) {
printk("%s: next frame inconsistency, %#2x\n", dev->name,
next_frame);
next_frame = ei_local->rx_start_page;
}
ei_local->current_page = next_frame;
outb_p(next_frame-1, e8390_base+EN0_BOUNDARY);
}
/* If any worth-while packets have been received, netif_rx()
has done a mark_bh(NET_BH) for us and will work on them
when we get to the bottom-half routine. */
/* Record the maximum Rx packet queue. */
if (rx_pkt_count > high_water_mark)
high_water_mark = rx_pkt_count;
/* We used to also ack ENISR_OVER here, but that would sometimes mask
a real overrun, leaving the 8390 in a stopped state with rec'vr off. */
outb_p(ENISR_RX+ENISR_RX_ERR, e8390_base+EN0_ISR);
return;
}
/* We have a receiver overrun: we have to kick the 8390 to get it started
again.*/
static void ei_rx_overrun(struct device *dev)
{
int e8390_base = dev->base_addr;
int reset_start_time = jiffies;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
/* We should already be stopped and in page0. Remove after testing. */
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
if (ei_debug > 1)
printk("%s: Receiver overrun.\n", dev->name);
ei_local->stat.rx_over_errors++;
/* The old Biro driver does dummy = inb_p( RBCR[01] ); at this point.
It might mean something -- magic to speed up a reset? A 8390 bug?*/
/* Wait for the reset to complete. This should happen almost instantly,
but could take up to 1.5msec in certain rare instances. There is no
easy way of timing something in that range, so we use 'jiffies' as
a sanity check. */
while ((inb_p(e8390_base+EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2*HZ/100) {
printk("%s: reset did not complete at ei_rx_overrun.\n",
dev->name);
NS8390_init(dev, 1);
return;
}
/* Remove packets right away. */
ei_receive(dev);
outb_p(ENISR_OVER, e8390_base+EN0_ISR);
/* Generic 8390 insns to start up again, same as in open_8390(). */
outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD);
outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */
}
static struct enet_statistics *get_stats(struct device *dev)
{
short ioaddr = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
/* If the card is stopped, just return the present stats. */
if (dev->start == 0) return &ei_local->stat;
/* Read the counter registers, assuming we are in page 0. */
ei_local->stat.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0);
ei_local->stat.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1);
ei_local->stat.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2);
return &ei_local->stat;
}
/*
* Set or clear the multicast filter for this adaptor.
*/
static void set_multicast_list(struct device *dev)
{
short ioaddr = dev->base_addr;
if(dev->flags&IFF_PROMISC)
{
outb_p(E8390_RXCONFIG | 0x18, ioaddr + EN0_RXCR);
}
else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
{
/* The multicast-accept list is initialized to accept-all, and we
rely on higher-level filtering for now. */
outb_p(E8390_RXCONFIG | 0x08, ioaddr + EN0_RXCR);
}
else
outb_p(E8390_RXCONFIG, ioaddr + EN0_RXCR);
}
/* Initialize the rest of the 8390 device structure. */
int ethdev_init(struct device *dev)
{
if (ei_debug > 1)
printk(version);
if (dev->priv == NULL) {
struct ei_device *ei_local;
dev->priv = kmalloc(sizeof(struct ei_device), GFP_KERNEL);
if (dev->priv == NULL)
return -ENOMEM;
memset(dev->priv, 0, sizeof(struct ei_device));
ei_local = (struct ei_device *)dev->priv;
ei_local->pingpong = ei_pingpong;
}
dev->hard_start_xmit = &ei_start_xmit;
dev->get_stats = get_stats;
dev->set_multicast_list = &set_multicast_list;
ether_setup(dev);
return 0;
}
/* This page of functions should be 8390 generic */
/* Follow National Semi's recommendations for initializing the "NIC". */
void NS8390_init(struct device *dev, int startp)
{
int e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
int i;
int endcfg = ei_local->word16 ? (0x48 | ENDCFG_WTS) : 0x48;
unsigned long flags;
/* Follow National Semi's recommendations for initing the DP83902. */
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base); /* 0x21 */
outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */
/* Clear the remote byte count registers. */
outb_p(0x00, e8390_base + EN0_RCNTLO);
outb_p(0x00, e8390_base + EN0_RCNTHI);
/* Set to monitor and loopback mode -- this is vital!. */
outb_p(E8390_RXOFF, e8390_base + EN0_RXCR); /* 0x20 */
outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */
/* Set the transmit page and receive ring. */
outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR);
ei_local->tx1 = ei_local->tx2 = 0;
outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG);
outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/
ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */
outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG);
/* Clear the pending interrupts and mask. */
outb_p(0xFF, e8390_base + EN0_ISR);
outb_p(0x00, e8390_base + EN0_IMR);
/* Copy the station address into the DS8390 registers,
and set the multicast hash bitmap to receive all multicasts. */
save_flags(flags);
cli();
outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base); /* 0x61 */
for(i = 0; i < 6; i++) {
outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS + i);
}
/* Initialize the multicast list to accept-all. If we enable multicast
the higher levels can do the filtering. */
for(i = 0; i < 8; i++)
outb_p(0xff, e8390_base + EN1_MULT + i);
outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG);
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base);
restore_flags(flags);
dev->tbusy = 0;
dev->interrupt = 0;
ei_local->tx1 = ei_local->tx2 = 0;
ei_local->txing = 0;
if (startp) {
outb_p(0xff, e8390_base + EN0_ISR);
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base);
outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */
/* 3c503 TechMan says rxconfig only after the NIC is started. */
outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); /* rx on, */
dev->set_multicast_list(dev); /* Get the multicast status right if this
was a reset. */
}
return;
}
/* Trigger a transmit start, assuming the length is valid. */
static void NS8390_trigger_send(struct device *dev, unsigned int length,
int start_page)
{
int e8390_base = dev->base_addr;
outb_p(E8390_NODMA+E8390_PAGE0, e8390_base);
if (inb_p(e8390_base) & E8390_TRANS) {
printk("%s: trigger_send() called with the transmitter busy.\n",
dev->name);
return;
}
outb_p(length & 0xff, e8390_base + EN0_TCNTLO);
outb_p(length >> 8, e8390_base + EN0_TCNTHI);
outb_p(start_page, e8390_base + EN0_TPSR);
outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base);
return;
}
#ifdef MODULE
int init_module(void)
{
return 0;
}
void
cleanup_module(void)
{
}
#endif /* MODULE */
/*
* Local variables:
* compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c 8390.c"
* version-control: t
* kept-new-versions: 5
* c-indent-level: 4
* tab-width: 4
* End:
*/
|