/* * Mach Operating System * Copyright (c) 1991,1990,1989 Carnegie Mellon University * All Rights Reserved. * * Permission to use, copy, modify and distribute this software and its * documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie Mellon * the rights to redistribute these changes. */ /* * File: if_3c501.c * Author: Philippe Bernadat * Date: 1989 * Copyright (c) 1989 OSF Research Institute * * 3COM Etherlink 3C501 Mach Ethernet drvier */ /* Copyright 1990 by Open Software Foundation, Cambridge, MA. All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name of OSF or Open Software Foundation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #ifdef MACH_KERNEL #include #include #include #include #include #include #include #include #else MACH_KERNEL #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef NS #include #include #endif #endif MACH_KERNEL #include #include #include #define SPLNET spl6 int at3c501probe(); void at3c501attach(); int at3c501intr(); int at3c501init(); int at3c501output(); int at3c501ioctl(); int at3c501reset(); int at3c501watch(); static vm_offset_t at3c501_std[NAT3C501] = { 0 }; static struct bus_device *at3c501_info[NAT3C501]; struct bus_driver at3c501driver = {at3c501probe, 0, at3c501attach, 0, at3c501_std, "et", at3c501_info, }; int watchdog_id; typedef struct { #ifdef MACH_KERNEL struct ifnet ds_if; /* generic interface header */ u_char ds_addr[6]; /* Ethernet hardware address */ #else MACH_KERNEL struct arpcom at3c501_ac; #define ds_if at3c501_ac.ac_if #define ds_addr at3c501_ac.ac_enaddr #endif MACH_KERNEL int flags; int timer; char *base; u_char address[ETHER_ADD_SIZE]; short mode; int badxmt; int badrcv; int spurious; int rcv; int xmt; } at3c501_softc_t; at3c501_softc_t at3c501_softc[NAT3C501]; /* * at3c501probe: * * This function "probes" or checks for the 3c501 board on the bus to see * if it is there. As far as I can tell, the best break between this * routine and the attach code is to simply determine whether the board * is configured in properly. Currently my approach to this is to write * and read a string from the Packet Buffer on the board being probed. * If the string comes back properly then we assume the board is there. * The config code expects to see a successful return from the probe * routine before attach will be called. * * input : address device is mapped to, and unit # being checked * output : a '1' is returned if the board exists, and a 0 otherwise * */ at3c501probe(port, dev) struct bus_device *dev; { caddr_t base = (caddr_t)dev->address; int unit = dev->unit; char inbuf[50]; char *str = "3c501 ethernet board %d out of range\n"; int strsize = strlen(str); if ((unit < 0) || (unit >= NAT3C501)) { printf(str, unit); return(0); } /* reset */ outb(IE_CSR(base), IE_RESET); /* write a string to the packet buffer */ outb(IE_CSR(base), IE_RIDE | IE_SYSBFR); outw(IE_GP(base), 0); loutb(IE_BFR(base), str, strsize); /* read it back */ outb(IE_CSR(base), IE_RIDE | IE_SYSBFR); outw(IE_GP(base), 0); linb(IE_BFR(base), inbuf, strsize); /* compare them */ #ifdef MACH_KERNEL if (strncmp(str, inbuf, strsize)) #else MACH_KERNEL if (bcmp(str, inbuf, strsize)) #endif MACH_KERNEL { return(0); } at3c501_softc[unit].base = base; return(1); } /* * at3c501attach: * * This function attaches a 3C501 board to the "system". The rest of * runtime structures are initialized here (this routine is called after * a successful probe of the board). Once the ethernet address is read * and stored, the board's ifnet structure is attached and readied. * * input : bus_device structure setup in autoconfig * output : board structs and ifnet is setup * */ void at3c501attach(dev) struct bus_device *dev; { at3c501_softc_t *sp; struct ifnet *ifp; u_char unit; caddr_t base; #ifdef MACH_KERNEL #else MACH_KERNEL extern int tcp_recvspace; tcp_recvspace = 0x300; /* empircal messure */ #endif MACH_KERNEL take_dev_irq(dev); unit = (u_char)dev->unit; printf(", port = %x, spl = %d, pic = %d. ", dev->address, dev->sysdep, dev->sysdep1); sp = &at3c501_softc[unit]; base = sp->base; if (base != (caddr_t)dev->address) { printf("3C501 board %d attach address error\n", unit); return; } sp->timer = -1; sp->flags = 0; sp->mode = 0; outb(IE_CSR(sp->base), IE_RESET); at3c501geteh(base, sp->ds_addr); at3c501geteh(base, sp->address); at3c501seteh(base, sp->address); printf("ethernet id [%x:%x:%x:%x:%x:%x]", sp->address[0],sp->address[1],sp->address[2], sp->address[3],sp->address[4],sp->address[5]); ifp = &(sp->ds_if); ifp->if_unit = unit; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST; #ifdef MACH_KERNEL ifp->if_header_size = sizeof(struct ether_header); ifp->if_header_format = HDR_ETHERNET; ifp->if_address_size = 6; ifp->if_address = (char *)&sp->address[0]; if_init_queues(ifp); #else MACH_KERNEL ifp->if_name = "et"; ifp->if_init = at3c501init; ifp->if_output = at3c501output; ifp->if_ioctl = at3c501ioctl; ifp->if_reset = at3c501reset; ifp->if_next = NULL; if_attach(ifp); #ifdef notdef watchdog_id = timeout(at3c501watch, &(ifp->if_unit), 20*HZ); #endif #endif MACH_KERNEL } /* * at3c501watch(): * */ at3c501watch(b_ptr) caddr_t b_ptr; { int x, y, opri, unit; at3c501_softc_t *is; unit = *b_ptr; #ifdef MACH_KERNEL timeout(at3c501watch,b_ptr,20*hz); #else MACH_KERNEL watchdog_id = timeout(at3c501watch,b_ptr,20*HZ); #endif MACH_KERNEL is = &at3c501_softc[unit]; printf("\nxmt/bad rcv/bad spurious\n"); printf("%d/%d %d/%d %d\n", is->xmt, is->badxmt, \ is->rcv, is->badrcv, is->spurious); is->rcv=is->badrcv=is->xmt=is->badxmt=is->spurious=0; } /* * at3c501geteh: * * This function gets the ethernet address (array of 6 unsigned * bytes) from the 3c501 board prom. * */ at3c501geteh(base, ep) caddr_t base; char *ep; { int i; for (i = 0; i < ETHER_ADD_SIZE; i++) { outw(IE_GP(base), i); *ep++ = inb(IE_SAPROM(base)); } } /* * at3c501seteh: * * This function sets the ethernet address (array of 6 unsigned * bytes) on the 3c501 board. * */ at3c501seteh(base, ep) caddr_t base; char *ep; { int i; for (i = 0; i < ETHER_ADD_SIZE; i++) { outb(EDLC_ADDR(base) + i, *ep++); } } #ifdef MACH_KERNEL int at3c501start(); /* forward */ at3c501output(dev, ior) dev_t dev; io_req_t ior; { register int unit = minor(dev); if (unit < 0 || unit >= NAT3C501 || at3c501_softc[unit].base == 0) return (ENXIO); return (net_write(&at3c501_softc[unit].ds_if, at3c501start, ior)); } at3c501setinput(dev, receive_port, priority, filter, filter_count) dev_t dev; mach_port_t receive_port; int priority; filter_t filter[]; u_int filter_count; { register int unit = minor(dev); if (unit < 0 || unit >= NAT3C501 || at3c501_softc[unit].base == 0) return (ENXIO); return (net_set_filter(&at3c501_softc[unit].ds_if, receive_port, priority, filter, filter_count)); } #else MACH_KERNEL /* * at3c501output: * * This routine is called by the "if" layer to output a packet to * the network. This code resolves the local ethernet address, and * puts it into the mbuf if there is room. If not, then a new mbuf * is allocated with the header information and precedes the data * to be transmitted. * * input: ifnet structure pointer, an mbuf with data, and address * to be resolved * output: mbuf is updated to hold enet address, or a new mbuf * with the address is added * */ at3c501output(ifp, m0, dst) struct ifnet *ifp; struct mbuf *m0; struct sockaddr *dst; { int type, error; spl_t opri; u_char edst[6]; struct in_addr idst; register at3c501_softc_t *is; register struct mbuf *m = m0; register struct ether_header *eh; register int off; int usetrailers; is = &at3c501_softc[ifp->if_unit]; if ((ifp->if_flags & (IFF_UP|IFF_RUNNING)) != (IFF_UP|IFF_RUNNING)) { printf("3C501 Turning off board %d\n", ifp->if_unit); at3c501intoff(ifp->if_unit); error = ENETDOWN; goto bad; } switch (dst->sa_family) { #ifdef INET case AF_INET: idst = ((struct sockaddr_in *)dst)->sin_addr; if (!arpresolve(&is->at3c501_ac, m, &idst, edst, &usetrailers)){ return (0); /* if not yet resolved */ } off = ntohs((u_short)mtod(m, struct ip *)->ip_len) - m->m_len; if (usetrailers && off > 0 && (off & 0x1ff) == 0 && m->m_off >= MMINOFF + 2 * sizeof (u_short)) { type = ETHERTYPE_TRAIL + (off>>9); m->m_off -= 2 * sizeof (u_short); m->m_len += 2 * sizeof (u_short); *mtod(m, u_short *) = htons((u_short)ETHERTYPE_IP); *(mtod(m, u_short *) + 1) = htons((u_short)m->m_len); goto gottrailertype; } type = ETHERTYPE_IP; off = 0; goto gottype; #endif #ifdef NS case AF_NS: type = ETHERTYPE_NS; bcopy((caddr_t)&(((struct sockaddr_ns *)dst)->sns_addr.x_host), (caddr_t)edst, sizeof (edst)); off = 0; goto gottype; #endif case AF_UNSPEC: eh = (struct ether_header *)dst->sa_data; bcopy((caddr_t)eh->ether_dhost, (caddr_t)edst, sizeof (edst)); type = eh->ether_type; goto gottype; default: printf("at3c501%d: can't handle af%d\n", ifp->if_unit, dst->sa_family); error = EAFNOSUPPORT; goto bad; } gottrailertype: /* * Packet to be sent as trailer: move first packet * (control information) to end of chain. */ while (m->m_next) m = m->m_next; m->m_next = m0; m = m0->m_next; m0->m_next = 0; m0 = m; gottype: /* * Add local net header. If no space in first mbuf, * allocate another. */ if (m->m_off > MMAXOFF || MMINOFF + sizeof (struct ether_header) > m->m_off) { m = m_get(M_DONTWAIT, MT_HEADER); if (m == 0) { error = ENOBUFS; goto bad; } m->m_next = m0; m->m_off = MMINOFF; m->m_len = sizeof (struct ether_header); } else { m->m_off -= sizeof (struct ether_header); m->m_len += sizeof (struct ether_header); } eh = mtod(m, struct ether_header *); eh->ether_type = htons((u_short)type); bcopy((caddr_t)edst, (caddr_t)eh->ether_dhost, sizeof (edst)); bcopy((caddr_t)is->address,(caddr_t)eh->ether_shost, sizeof(edst)); /* * Queue message on interface, and start output if interface * not yet active. */ opri = SPLNET(); if (IF_QFULL(&ifp->if_snd)) { IF_DROP(&ifp->if_snd); splx(opri); m_freem(m); return (ENOBUFS); } IF_ENQUEUE(&ifp->if_snd, m); /* * Some action needs to be added here for checking whether the * board is already transmitting. If it is, we don't want to * start it up (ie call at3c501start()). We will attempt to send * packets that are queued up after an interrupt occurs. Some * flag checking action has to happen here and/or in the start * routine. This note is here to remind me that some thought * is needed and there is a potential problem here. * */ at3c501start(ifp->if_unit); splx(opri); return (0); bad: m_freem(m0); return (error); } #endif MACH_KERNEL /* * at3c501reset: * * This routine is in part an entry point for the "if" code. Since most * of the actual initialization has already (we hope already) been done * by calling at3c501attach(). * * input : unit number or board number to reset * output : board is reset * */ at3c501reset(unit) int unit; { at3c501_softc[unit].ds_if.if_flags &= ~IFF_RUNNING; return(at3c501init(unit)); } /* * at3c501init: * * Another routine that interfaces the "if" layer to this driver. * Simply resets the structures that are used by "upper layers". * As well as calling at3c501hwrst that does reset the at3c501 board. * * input : board number * output : structures (if structs) and board are reset * */ at3c501init(unit) int unit; { struct ifnet *ifp; int stat; spl_t oldpri; ifp = &(at3c501_softc[unit].ds_if); #ifdef MACH_KERNEL #else MACH_KERNEL if (ifp->if_addrlist == (struct ifaddr *)0) { return; } #endif MACH_KERNEL oldpri = SPLNET(); if ((stat = at3c501hwrst(unit)) == TRUE) { at3c501_softc[unit].ds_if.if_flags |= IFF_RUNNING; at3c501_softc[unit].flags |= DSF_RUNNING; at3c501start(unit); } else printf("3C501 trouble resetting board %d\n", unit); at3c501_softc[unit].timer = 5; splx(oldpri); return(stat); } #ifdef MACH_KERNEL /*ARGSUSED*/ at3c501open(dev, flag) dev_t dev; int flag; { register int unit = minor(dev); if (unit < 0 || unit >= NAT3C501 || at3c501_softc[unit].base == 0) return (ENXIO); at3c501_softc[unit].ds_if.if_flags |= IFF_UP; at3c501init(unit); return(0); } #endif MACH_KERNEL /* * at3c501start: * * This is yet another interface routine that simply tries to output a * in an mbuf after a reset. * * input : board number * output : stuff sent to board if any there * */ at3c501start(unit) int unit; { #ifdef MACH_KERNEL io_req_t m; #else MACH_KERNEL struct mbuf *m; #endif MACH_KERNEL struct ifnet *ifp; ifp = &(at3c501_softc[unit].ds_if); for(;;) { IF_DEQUEUE(&ifp->if_snd, m); #ifdef MACH_KERNEL if (m != 0) #else MACH_KERNEL if (m != (struct mbuf *)0) #endif MACH_KERNEL at3c501xmt(unit, m); else return; } } #ifdef MACH_KERNEL /*ARGSUSED*/ at3c501getstat(dev, flavor, status, count) dev_t dev; int flavor; dev_status_t status; /* pointer to OUT array */ u_int *count; /* out */ { register int unit = minor(dev); if (unit < 0 || unit >= NAT3C501 || at3c501_softc[unit].base == 0) return (ENXIO); return (net_getstat(&at3c501_softc[unit].ds_if, flavor, status, count)); } at3c501setstat(dev, flavor, status, count) dev_t dev; int flavor; dev_status_t status; u_int count; { register int unit = minor(dev); register at3c501_softc_t *sp; if (unit < 0 || unit >= NAT3C501 || at3c501_softc[unit].base == 0) return (ENXIO); sp = &at3c501_softc[unit]; switch (flavor) { case NET_STATUS: { /* * All we can change are flags, and not many of those. */ register struct net_status *ns = (struct net_status *)status; int mode = 0; if (count < NET_STATUS_COUNT) return (D_INVALID_SIZE); if (ns->flags & IFF_ALLMULTI) mode |= MOD_ENAL; if (ns->flags & IFF_PROMISC) mode |= MOD_PROM; /* * Force a compilete reset if the receive mode changes * so that these take effect immediately. */ if (sp->mode != mode) { sp->mode = mode; if (sp->flags & DSF_RUNNING) { sp->flags &= ~(DSF_LOCK | DSF_RUNNING); at3c501init(unit); } } break; } case NET_ADDRESS: { register union ether_cvt { char addr[6]; int lwd[2]; } *ec = (union ether_cvt *)status; if (count < sizeof(*ec)/sizeof(int)) return (D_INVALID_SIZE); ec->lwd[0] = ntohl(ec->lwd[0]); ec->lwd[1] = ntohl(ec->lwd[1]); at3c501seteh(sp->base, ec->addr); break; } default: return (D_INVALID_OPERATION); } return (D_SUCCESS); } #else MACH_KERNEL /* * at3c501ioctl: * * This routine processes an ioctl request from the "if" layer * above. * * input : pointer the appropriate "if" struct, command, and data * output : based on command appropriate action is taken on the * at3c501 board(s) or related structures * return : error is returned containing exit conditions * */ int curr_ipl; u_short curr_pic_mask; u_short pic_mask[]; at3c501ioctl(ifp, cmd, data) struct ifnet *ifp; int cmd; caddr_t data; { register struct ifaddr *ifa = (struct ifaddr *)data; register at3c501_softc_t *is; int error; spl_t opri; short mode = 0; is = &at3c501_softc[ifp->if_unit]; opri = SPLNET(); error = 0; switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; at3c501init(ifp->if_unit); switch (ifa->ifa_addr.sa_family) { #ifdef INET case AF_INET: ((struct arpcom *)ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr; arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr); break; #endif #ifdef NS case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(ds->ds_addr); else at3c501seteh(ina->x_host.c_host, at3c501_softc[ifp->if_unit].base); break; } #endif } break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_ALLMULTI) mode |= MOD_ENAL; if (ifp->if_flags & IFF_PROMISC) mode |= MOD_PROM; /* * force a complete reset if the receive multicast/ * promiscuous mode changes so that these take * effect immediately. * */ if (is->mode != mode) { is->mode = mode; if (is->flags & DSF_RUNNING) { is->flags &= ~(DSF_LOCK|DSF_RUNNING); at3c501init(ifp->if_unit); } } if ((ifp->if_flags & IFF_UP) == 0 && is->flags & DSF_RUNNING) { printf("AT3C501 ioctl: turning off board %d\n", ifp->if_unit); is->flags &= ~(DSF_LOCK | DSF_RUNNING); is->timer = -1; at3c501intoff(ifp->if_unit); } else if (ifp->if_flags & IFF_UP && (is->flags & DSF_RUNNING) == 0) at3c501init(ifp->if_unit); break; default: error = EINVAL; } splx(opri); return (error); } #endif MACH_KERNEL /* * at3c501hwrst: * * This routine resets the at3c501 board that corresponds to the * board number passed in. * * input : board number to do a hardware reset * output : board is reset * */ #define XMT_STAT (EDLC_16|EDLC_JAM|EDLC_UNDER|EDLC_IDLE) #define RCV_STAT (EDLC_STALE|EDLC_ANY|EDLC_SHORT|EDLC_DRIBBLE|EDLC_OVER|EDLC_FCS) int at3c501hwrst(unit) int unit; { u_char stat; caddr_t base = at3c501_softc[unit].base; outb(IE_CSR(base), IE_RESET); outb(IE_CSR(base), 0); at3c501seteh(base, at3c501_softc[unit].address); if ((stat = inb(IE_CSR(base))) != IE_RESET) { printf("at3c501reset: can't reset CSR: %x\n", stat); return(FALSE); } if ((stat = inb(EDLC_XMT(base))) & XMT_STAT) { printf("at3c501reset: can't reset XMT: %x\n", stat); return(FALSE); } if (((stat = inb(EDLC_RCV(base))) & RCV_STAT) != EDLC_STALE) { printf("at3c501reset: can't reset RCV: %x\n", stat); return(FALSE); } if (at3c501config(unit) == FALSE) { printf("at3c501hwrst(): failed to config\n"); return(FALSE); } outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return(TRUE); } /* * at3c501intr: * * This function is the interrupt handler for the at3c501 ethernet * board. This routine will be called whenever either a packet * is received, or a packet has successfully been transfered and * the unit is ready to transmit another packet. * * input : board number that interrupted * output : either a packet is received, or a packet is transfered * */ at3c501intr(unit) int unit; { at3c501rcv(unit); at3c501start(unit); return(0); } /* * at3c501rcv: * * This routine is called by the interrupt handler to initiate a * packet transfer from the board to the "if" layer above this * driver. This routine checks if a buffer has been successfully * received by the at3c501. If so, the routine at3c501read is called * to do the actual transfer of the board data (including the * ethernet header) into a packet (consisting of an mbuf chain). * * input : number of the board to check * output : if a packet is available, it is "sent up" * */ at3c501rcv(unit) int unit; { int stat; caddr_t base; #ifdef MACH_KERNEL ipc_kmsg_t new_kmsg; struct ether_header *ehp; struct packet_header *pkt; #else MACH_KERNEL struct mbuf *m, *tm; #endif MACH_KERNEL u_short len; register struct ifnet *ifp; struct ether_header header; int tlen; register at3c501_softc_t *is; register struct ifqueue *inq; spl_t opri; struct ether_header eh; is = &at3c501_softc[unit]; ifp = &is->ds_if; base = at3c501_softc[unit].base; is->rcv++; if (inb(IE_CSR(base)) & IE_RCVBSY) is->spurious++; while (!((stat=inb(EDLC_RCV(base))) & EDLC_STALE)) { outb(IE_CSR(base), IE_SYSBFR); if (!(stat & EDLC_ANY)) { outw(IE_GP(base), 0); len = inw(IE_RP(base))-sizeof(struct ether_header); outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); is->badrcv++; #ifdef DEBUG printf("at3c501rcv: received %d bad bytes", len); if (stat & EDLC_SHORT) printf(" Short frame"); if (stat & EDLC_OVER) printf(" Data overflow"); if (stat & EDLC_DRIBBLE) printf(" Dribble error"); if (stat & EDLC_FCS) printf(" CRC error"); printf("\n"); #endif DEBUG } else { outw(IE_GP(base), 0); len = inw(IE_RP(base)); if (len < 60) { outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return; } linb(IE_BFR(base), &eh, sizeof(struct ether_header)); #ifdef MACH_KERNEL new_kmsg = net_kmsg_get(); if (new_kmsg == IKM_NULL) { /* * Drop the packet. */ is->ds_if.if_rcvdrops++; outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return; } ehp = (struct ether_header *) (&net_kmsg(new_kmsg)->header[0]); pkt = (struct packet_header *) (&net_kmsg(new_kmsg)->packet[0]); /* * Get header. */ *ehp = eh; /* * Get body */ linb(IE_BFR(base), (char *)(pkt + 1), len - sizeof(struct ether_header)); outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); pkt->type = ehp->ether_type; pkt->length = len - sizeof(struct ether_header) + sizeof(struct packet_header); /* * Hand the packet to the network module. */ net_packet(ifp, new_kmsg, pkt->length, ethernet_priority(new_kmsg)); #else MACH_KERNEL eh.ether_type = htons(eh.ether_type); m =(struct mbuf *)0; #ifdef DEBUG printf("received %d bytes\n", len); #endif DEBUG len -= sizeof(struct ether_header); while ( len ) { if (m == (struct mbuf *)0) { m = m_get(M_DONTWAIT, MT_DATA); if (m == (struct mbuf *)0) { printf("at3c501rcv: Lost frame\n"); outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return; } tm = m; tm->m_off = MMINOFF; /* * first mbuf in the packet must contain a pointer to the * ifnet structure. other mbufs that follow and make up * the packet do not need this pointer in the mbuf. * */ *(mtod(tm, struct ifnet **)) = ifp; tm->m_len = sizeof(struct ifnet **); } else { tm->m_next = m_get(M_DONTWAIT, MT_DATA); tm = tm->m_next; tm->m_off = MMINOFF; tm->m_len = 0; if (tm == (struct mbuf *)0) { m_freem(m); printf("at3c501rcv: No mbufs, lost frame\n"); outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return; } } tlen = MIN( MLEN - tm->m_len, len ); tm->m_next = (struct mbuf *)0; linb(IE_BFR(base), mtod(tm, char *)+tm->m_len, tlen ); tm->m_len += tlen; len -= tlen; } outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); /* * received packet is now in a chain of mbuf's. next step is * to pass the packet upwards. * */ switch (eh.ether_type) { #ifdef INET case ETHERTYPE_IP: schednetisr(NETISR_IP); inq = &ipintrq; break; case ETHERTYPE_ARP: arpinput(&is->at3c501_ac, m); return; #endif #ifdef NS case ETHERTYPE_NS: schednetisr(NETISR_NS); inq = &nsintrq; break; #endif default: m_freem(m); return; } opri = SPLNET(); if (IF_QFULL(inq)) { IF_DROP(inq); splx(opri); m_freem(m); return; } IF_ENQUEUE(inq, m); splx(opri); #endif MACH_KERNEL } } } /* * at3c501xmt: * * This routine fills in the appropriate registers and memory * locations on the 3C501 board and starts the board off on * the transmit. * * input : board number of interest, and a pointer to the mbuf * output : board memory and registers are set for xfer and attention * */ at3c501xmt(unit, m) int unit; #ifdef MACH_KERNEL io_req_t m; #else MACH_KERNEL struct mbuf *m; #endif MACH_KERNEL { #ifdef MACH_KERNEL #else MACH_KERNEL register struct mbuf *tm_p; #endif MACH_KERNEL int i; at3c501_softc_t *is = &at3c501_softc[unit]; caddr_t base = is->base; u_short count = 0; u_short bytes_in_msg; is->xmt++; outb(IE_CSR(base), IE_SYSBFR); #ifdef MACH_KERNEL count = m->io_count; #define max(a,b) (((a) > (b)) ? (a) : (b)) bytes_in_msg = max(count, ETHERMIN + sizeof(struct ether_header)); #else MACH_KERNEL bytes_in_msg = max(m_length(m), ETHERMIN + sizeof(struct ether_header)); #endif MACH_KERNEL outw(IE_GP(base), BFRSIZ-bytes_in_msg); #ifdef MACH_KERNEL loutb(IE_BFR(base), m->io_data, count); #else MACH_KERNEL for (tm_p = m; tm_p != (struct mbuf *)0; tm_p = tm_p->m_next) { if (count + tm_p->m_len > ETHERMTU + sizeof(struct ether_header)) break; if (tm_p->m_len == 0) continue; loutb(IE_BFR(base), mtod(tm_p, caddr_t), tm_p->m_len); count += tm_p->m_len; } #endif MACH_KERNEL while (count < bytes_in_msg) { outb(IE_BFR(base), 0); count++; } do { if (!(int)m) { outb(IE_CSR(base), IE_SYSBFR); } outw(IE_GP(base), BFRSIZ-bytes_in_msg); outb(IE_CSR(base), IE_RIDE|IE_XMTEDLC); if (m) { #ifdef MACH_KERNEL iodone(m); m = 0; #else MACH_KERNEL m_freem(m); m = (struct mbuf *) 0; #endif MACH_KERNEL } for (i=0; inb(IE_CSR(base)) & IE_XMTBSY; i++); if ((i=inb(EDLC_XMT(base))) & EDLC_JAM) { is->badxmt++; #ifdef DEBUG printf("at3c501xmt jam\n"); #endif DEBUG } } while ((i & EDLC_JAM) && !(i & EDLC_16)); if (i & EDLC_16) { printf("%"); } return; } /* * at3c501config: * * This routine does a standard config of the at3c501 board. * */ at3c501config(unit) int unit; { caddr_t base = at3c501_softc[unit].base; u_char stat; /* Enable DMA & Interrupts */ outb(IE_CSR(base), IE_RIDE|IE_SYSBFR); /* No Transmit Interrupts */ outb(EDLC_XMT(base), 0); inb(EDLC_XMT(base)); /* Setup Receive Interrupts */ outb(EDLC_RCV(base), EDLC_BROAD|EDLC_SHORT|EDLC_GOOD|EDLC_DRIBBLE|EDLC_OVER); inb(EDLC_RCV(base)); outb(IE_CSR(base), IE_RIDE|IE_SYSBFR); outb(IE_RP(base), 0); outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); return(TRUE); } /* * at3c501intoff: * * This function turns interrupts off for the at3c501 board indicated. * */ at3c501intoff(unit) int unit; { caddr_t base = at3c501_softc[unit].base; outb(IE_CSR(base), 0); } #ifdef MACH_KERNEL #else MACH_KERNEL /* * The length of an mbuf chain */ m_length(m) register struct mbuf *m; { register int len = 0; while (m) { len += m->m_len; m = m->m_next; } return len; } #endif MACH_KERNEL