/* * Copyright (c) 1994 Shantanu Goel * All Rights Reserved. * * Permission to use, copy, modify and distribute this software and its * documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * THE AUTHOR ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. THE AUTHOR DISCLAIMS ANY LIABILITY OF ANY KIND FOR * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. */ /* * Written 1992,1993 by Donald Becker. * * Copyright 1993 United States Government as represented by the * Director, National Security Agency. This software may be used and * distributed according to the terms of the GNU Public License, * incorporated herein by reference. * * The Author may be reached as becker@super.org or * C/O Supercomputing Research Ctr., 17100 Science Dr., Bowie MD 20715 */ /* * Generic NS8390 definitions. * Derived from the Linux driver by Donald Becker. */ #define ETHER_ADDR_LEN 6 /* * 8390 state. */ struct nssoftc { struct ifnet sc_if; /* interface header */ u_char sc_addr[ETHER_ADDR_LEN]; /* station address */ /* * The following are board specific. * reset() - resets the NIC and board * input() - read data into buffer from supplied offset * output() - write data from buffer into supplied page * the data is padded if necessary and the actual * count is returned. */ void (*sc_reset)(struct nssoftc *); void (*sc_input)(struct nssoftc *, int, char *, int); int (*sc_output)(struct nssoftc *, int, char *, int); int sc_word16:1; /* 16 bit (vs 8 bit) board */ int sc_txing:1; /* transmit active */ int sc_pingpong:1; /* using ping-pong driver */ int sc_oactive:1; /* transmitter is active */ u_char sc_txstrtpg; /* starting transmit page */ u_char sc_rxstrtpg; /* starting receive page */ u_char sc_stoppg; /* stop page */ u_char sc_curpg; /* current page */ short sc_tx1; /* packet lengths for ping-pong transmit */ short sc_tx2; short sc_lasttx; u_char sc_timer; /* watchdog */ int sc_port; /* I/O port of 8390 */ char *sc_name; /* name of board */ int sc_unit; /* unit in driver */ }; #define TX_2X_PAGES 12 #define TX_1X_PAGES 6 #define TX_PAGES(ns) ((ns)->sc_pingpong ? TX_2X_PAGES : TX_1X_PAGES) /* Some generic ethernet register configurations. */ #define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */ #define E8390_RX_IRQ_MASK 0x5 #define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */ #define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */ #define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */ #define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */ /* Register accessed at EN_CMD, the 8390 base addr. */ #define E8390_STOP 0x01 /* Stop and reset the chip */ #define E8390_START 0x02 /* Start the chip, clear reset */ #define E8390_TRANS 0x04 /* Transmit a frame */ #define E8390_RREAD 0x08 /* Remote read */ #define E8390_RWRITE 0x10 /* Remote write */ #define E8390_NODMA 0x20 /* Remote DMA */ #define E8390_PAGE0 0x00 /* Select page chip registers */ #define E8390_PAGE1 0x40 /* using the two high-order bits */ #define E8390_PAGE2 0x80 /* Page 3 is invalid. */ #define E8390_CMD 0x00 /* The command register (for all pages) */ /* Page 0 register offsets. */ #define EN0_CLDALO 0x01 /* Low byte of current local dma addr RD */ #define EN0_STARTPG 0x01 /* Starting page of ring bfr WR */ #define EN0_CLDAHI 0x02 /* High byte of current local dma addr RD */ #define EN0_STOPPG 0x02 /* Ending page +1 of ring bfr WR */ #define EN0_BOUNDARY 0x03 /* Boundary page of ring bfr RD WR */ #define EN0_TSR 0x04 /* Transmit status reg RD */ #define EN0_TPSR 0x04 /* Transmit starting page WR */ #define EN0_NCR 0x05 /* Number of collision reg RD */ #define EN0_TCNTLO 0x05 /* Low byte of tx byte count WR */ #define EN0_FIFO 0x06 /* FIFO RD */ #define EN0_TCNTHI 0x06 /* High byte of tx byte count WR */ #define EN0_ISR 0x07 /* Interrupt status reg RD WR */ #define EN0_CRDALO 0x08 /* low byte of current remote dma address RD */ #define EN0_RSARLO 0x08 /* Remote start address reg 0 */ #define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */ #define EN0_RSARHI 0x09 /* Remote start address reg 1 */ #define EN0_RCNTLO 0x0a /* Remote byte count reg WR */ #define EN0_RCNTHI 0x0b /* Remote byte count reg WR */ #define EN0_RSR 0x0c /* rx status reg RD */ #define EN0_RXCR 0x0c /* RX configuration reg WR */ #define EN0_TXCR 0x0d /* TX configuration reg WR */ #define EN0_COUNTER0 0x0d /* Rcv alignment error counter RD */ #define EN0_DCFG 0x0e /* Data configuration reg WR */ #define EN0_COUNTER1 0x0e /* Rcv CRC error counter RD */ #define EN0_IMR 0x0f /* Interrupt mask reg WR */ #define EN0_COUNTER2 0x0f /* Rcv missed frame error counter RD */ /* Bits in EN0_ISR - Interrupt status register */ #define ENISR_RX 0x01 /* Receiver, no error */ #define ENISR_TX 0x02 /* Transmitter, no error */ #define ENISR_RX_ERR 0x04 /* Receiver, with error */ #define ENISR_TX_ERR 0x08 /* Transmitter, with error */ #define ENISR_OVER 0x10 /* Receiver overwrote the ring */ #define ENISR_COUNTERS 0x20 /* Counters need emptying */ #define ENISR_RDC 0x40 /* remote dma complete */ #define ENISR_RESET 0x80 /* Reset completed */ #define ENISR_ALL 0x3f /* Interrupts we will enable */ /* Bits in EN0_DCFG - Data config register */ #define ENDCFG_WTS 0x01 /* word transfer mode selection */ /* Page 1 register offsets. */ #define EN1_PHYS 0x01 /* This board's physical enet addr RD WR */ #define EN1_CURPAG 0x07 /* Current memory page RD WR */ #define EN1_MULT 0x08 /* Multicast filter mask array (8 bytes) RD WR */ /* Bits in received packet status byte and EN0_RSR*/ #define ENRSR_RXOK 0x01 /* Received a good packet */ #define ENRSR_CRC 0x02 /* CRC error */ #define ENRSR_FAE 0x04 /* frame alignment error */ #define ENRSR_FO 0x08 /* FIFO overrun */ #define ENRSR_MPA 0x10 /* missed pkt */ #define ENRSR_PHY 0x20 /* physical/multicase address */ #define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */ #define ENRSR_DEF 0x80 /* deferring */ /* Transmitted packet status, EN0_TSR. */ #define ENTSR_PTX 0x01 /* Packet transmitted without error */ #define ENTSR_ND 0x02 /* The transmit wasn't deferred. */ #define ENTSR_COL 0x04 /* The transmit collided at least once. */ #define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */ #define ENTSR_CRS 0x10 /* The carrier sense was lost. */ #define ENTSR_FU 0x20 /* A "FIFO underrun" occured during transmit. */ #define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */ #define ENTSR_OWC 0x80 /* There was an out-of-window collision. */ /* The per-packet-header format. */ struct nspkthdr { u_char status; /* status */ u_char next; /* pointer to next packet. */ u_short count; /* header + packet length in bytes */ }; void nsinit(struct nssoftc *); void nsstart(struct nssoftc *); void nsintr(struct nssoftc *);