This is ../doc/mach.info, produced by makeinfo version 4.8 from
../doc/mach.texi.
INFO-DIR-SECTION Kernel
START-INFO-DIR-ENTRY
* GNUMach: (mach). Using and programming the GNU Mach microkernel.
END-INFO-DIR-ENTRY
This file documents the GNU Mach microkernel.
This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
Reference Manual', for Version 1.3.99.
Copyright (C) 2001 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Free Software Needs Free Documentation" and
"GNU Lesser General Public License", the Front-Cover texts being (a)
(see below), and with the Back-Cover Texts being (b) (see below). A
copy of the license is included in the section entitled "GNU Free
Documentation License".
(a) The FSF's Front-Cover Text is:
A GNU Manual
(b) The FSF's Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.
This work is based on manual pages under the following copyright and
license:
Mach Operating System
Copyright (C) 1991,1990 Carnegie Mellon University
All Rights Reserved.
Permission to use, copy, modify and distribute this software and its
documentation is hereby granted, provided that both the copyright
notice and this permission notice appear in all copies of the software,
derivative works or modified versions, and any portions thereof, and
that both notices appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY
DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
File: mach.info, Node: Top, Next: Introduction, Up: (dir)
Main Menu
*********
This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
Reference Manual', for Version 1.3.99 of the GNU Mach microkernel.
* Menu:
* Introduction:: How to use this manual.
* Installing:: Setting up GNU Mach on your computer.
* Bootstrap:: Running GNU Mach on your machine.
* Inter Process Communication:: Communication between process.
* Virtual Memory Interface:: Allocating and deallocating virtual memory.
* External Memory Management:: Handling memory pages in user space.
* Threads and Tasks:: Handling of threads and tasks.
* Host Interface:: Interface to a Mach host.
* Processors and Processor Sets:: Handling processors and sets of processors.
* Device Interface:: Accesing kernel devices.
* Kernel Debugger:: How to use the built-in kernel debugger.
Appendices
* Copying:: The GNU General Public License says how you
can copy and share the GNU Mach microkernel.
* Documentation License:: This manual is under the GNU Free
Documentation License.
Indices
* Concept Index:: Index of concepts and programs.
* Function and Data Index:: Index of functions, variables and data types.
--- The Detailed Node Listing ---
Introduction
* Audience:: The people for whom this manual is written.
* Features:: Reasons to install and use GNU Mach.
* Overview:: Basic architecture of the Mach microkernel.
* History:: The story about Mach.
Installing
* Binary Distributions:: Obtaining ready-to-run GNU distributions.
* Compilation:: Building GNU Mach from its source code.
* Configuration:: Configuration options at compilation time.
* Cross-Compilation:: Building GNU Mach from another system.
Bootstrap
* Bootloader:: Starting the microkernel, or other OSes.
* Modules:: Starting the first task of the OS.
Inter Process Communication
* Major Concepts:: The concepts behind the Mach IPC system.
* Messaging Interface:: Composing, sending and receiving messages.
* Port Manipulation Interface:: Manipulating ports, port rights, port sets.
Messaging Interface
* Mach Message Call:: Sending and receiving messages.
* Message Format:: The format of Mach messages.
* Exchanging Port Rights:: Sending and receiving port rights.
* Memory:: Passing memory regions in messages.
* Message Send:: Sending messages.
* Message Receive:: Receiving messages.
* Atomicity:: Atomicity of port rights.
Port Manipulation Interface
* Port Creation:: How to create new ports and port sets.
* Port Destruction:: How to destroy ports and port sets.
* Port Names:: How to query and manipulate port names.
* Port Rights:: How to work with port rights.
* Ports and other Tasks:: How to move rights between tasks.
* Receive Rights:: How to work with receive rights.
* Port Sets:: How to work with port sets.
* Request Notifications:: How to request notifications for events.
Virtual Memory Interface
* Memory Allocation:: Allocation of new virtual memory.
* Memory Deallocation:: Freeing unused virtual memory.
* Data Transfer:: Reading, writing and copying memory.
* Memory Attributes:: Tweaking memory regions.
* Mapping Memory Objects:: How to map memory objects.
* Memory Statistics:: How to get statistics about memory usage.
External Memory Management
* Memory Object Server:: The basics of external memory management.
* Memory Object Creation:: How new memory objects are created.
* Memory Object Termination:: How memory objects are terminated.
* Memory Objects and Data:: Data transfer to and from memory objects.
* Memory Object Locking:: How memory objects are locked.
* Memory Object Attributes:: Manipulating attributes of memory objects.
* Default Memory Manager:: Setting and using the default memory manager.
Threads and Tasks
* Thread Interface:: Manipulating threads.
* Task Interface:: Manipulating tasks.
* Profiling:: Profiling threads and tasks.
Thread Interface
* Thread Creation:: Creating threads.
* Thread Termination:: Terminating threads.
* Thread Information:: How to get informations on threads.
* Thread Settings:: How to set threads related informations.
* Thread Execution:: How to control the thread's machine state.
* Scheduling:: Operations on thread scheduling.
* Thread Special Ports:: How to handle the thread's special ports.
* Exceptions:: Managing exceptions.
Scheduling
* Thread Priority:: Changing the priority of a thread.
* Hand-Off Scheduling:: Switch to a new thread.
* Scheduling Policy:: Setting the scheduling policy.
Task Interface
* Task Creation:: Creating tasks.
* Task Termination:: Terminating tasks.
* Task Information:: Informations on tasks.
* Task Execution:: Thread scheduling in a task.
* Task Special Ports:: How to get and set the task's special ports.
* Syscall Emulation:: How to emulate system calls.
Host Interface
* Host Ports:: Ports representing a host.
* Host Information:: Query information about a host.
* Host Time:: Functions to query manipulate the host time.
* Host Reboot:: Rebooting the system.
Processors and Processor Sets
* Processor Set Interface:: How to work with processor sets.
* Processor Interface:: How to work with individual processors.
Processor Set Interface
* Processor Set Ports:: Ports representing a processor set.
* Processor Set Access:: How the processor sets are accessed.
* Processor Set Creation:: How new processor sets are created.
* Processor Set Destruction:: How processor sets are destroyed.
* Tasks and Threads on Sets:: Assigning tasks or threads to processor sets.
* Processor Set Priority:: Specifying the priority of a processor set.
* Processor Set Policy:: Changing the processor set policies.
* Processor Set Info:: Obtaining information about a processor set.
Processor Interface
* Hosted Processors:: Getting a list of all processors on a host.
* Processor Control:: Starting, stopping, controlling processors.
* Processors and Sets:: Combining processors into processor sets.
* Processor Info:: Obtaining information on processors.
Device Interface
* Device Open:: Opening hardware devices.
* Device Close:: Closing hardware devices.
* Device Read:: Reading data from the device.
* Device Write:: Writing data to the device.
* Device Map:: Mapping devices into virtual memory.
* Device Status:: Querying and manipulating a device.
* Device Filter:: Filtering packets arriving on a device.
Kernel Debugger
* Operation:: Basic architecture of the kernel debugger.
* Commands:: Available commands in the kernel debugger.
* Variables:: Access of variables from the kernel debugger.
* Expressions:: Usage of expressions in the kernel debugger.
Documentation License
* Free Documentation License:: The GNU Free Documentation License.
* CMU License:: The CMU license applies to the original Mach
kernel and its documentation.
File: mach.info, Node: Introduction, Next: Installing, Prev: Top, Up: Top
1 Introduction
**************
GNU Mach is the microkernel of the GNU Project. It is the base of the
operating system, and provides its functionality to the Hurd servers,
the GNU C Library and all user applications. The microkernel itself
does not provide much functionality of the system, just enough to make
it possible for the Hurd servers and the C library to implement the
missing features you would expect from a POSIX compatible operating
system.
* Menu:
* Audience:: The people for whom this manual is written.
* Features:: Reasons to install and use GNU Mach.
* Overview:: Basic architecture of the Mach microkernel.
* History:: The story about Mach.
File: mach.info, Node: Audience, Next: Features, Up: Introduction
1.1 Audience
============
This manual is designed to be useful to everybody who is interested in
using, administering, or programming the Mach microkernel.
If you are an end-user and you are looking for help on running the
Mach kernel, the first few chapters of this manual describe the
essential parts of installing and using the kernel in the GNU operating
system.
The rest of this manual is a technical discussion of the Mach
programming interface and its implementation, and would not be helpful
until you want to learn how to extend the system or modify the kernel.
This manual is organized according to the subsystems of Mach, and
each chapter begins with descriptions of conceptual ideas that are
related to that subsystem. If you are a programmer and want to learn
more about, say, the Mach IPC subsystem, you can skip to the IPC chapter
(*note Inter Process Communication::), and read about the related
concepts and interface definitions.
File: mach.info, Node: Features, Next: Overview, Prev: Audience, Up: Introduction
1.2 Features
============
GNU Mach is not the most advanced microkernel known to the planet, nor
is it the fastest or smallest, but it has a rich set of interfaces and
some features which make it useful as the base of the Hurd system.
it's free software
Anybody can use, modify, and redistribute it under the terms of
the GNU General Public License (*note Copying::). GNU Mach is
part of the GNU system, which is a complete operating system
licensed under the GPL.
it's built to survive
As a microkernel, GNU Mach doesn't implement a lot of the features
commonly found in an operating system, but only the bare minimum
that is required to implement a full operating system on top of it.
This means that a lot of the operating system code is maintained
outside of GNU Mach, and while this code may go through a complete
redesign, the code of the microkernel can remain comparatively
stable.
it's scalable
Mach is particularly well suited for SMP and network cluster
techniques. Thread support is provided at the kernel level, and
the kernel itself takes advantage of that. Network transparency
at the IPC level makes resources of the system available across
machine boundaries (with NORMA IPC, currently not available in GNU
Mach).
it exists
The Mach microkernel is real software that works Right Now. It is
not a research or a proposal. You don't have to wait at all
before you can start using and developing it. Mach has been used
in many operating systems in the past, usually as the base for a
single UNIX server. In the GNU system, Mach is the base of a
functional multi-server operating system, the Hurd.
File: mach.info, Node: Overview, Next: History, Prev: Features, Up: Introduction
1.3 Overview
============
An operating system kernel provides a framework for programs to share a
computer's hardware resources securely and efficiently. This requires
that the programs are seperated and protected from each other. To make
running multiple programs in parallel useful, there also needs to be a
facility for programs to exchange information by communication.
The Mach microkernel provides abstractions of the underlying hardware
resources like devices and memory. It organizes the running programs
into tasks and threads (points of execution in the tasks). In addition,
Mach provides a rich interface for inter-process communication.
What Mach does not provide is a POSIX compatible programming
interface. In fact, it has no understanding of file systems, POSIX
process semantics, network protocols and many more. All this is
implemented in tasks running on top of the microkernel. In the GNU
operating system, the Hurd servers and the C library share the
responsibility to implement the POSIX interface, and the additional
interfaces which are specific to the GNU system.
File: mach.info, Node: History, Prev: Overview, Up: Introduction
1.4 History
===========
XXX A few lines about the history of Mach here.
File: mach.info, Node: Installing, Next: Bootstrap, Prev: Introduction, Up: Top
2 Installing
************
Before you can use the Mach microkernel in your system you'll need to
install it and all components you want to use with it, e.g. the rest of
the operating system. You also need a bootloader to load the kernel
from the storage medium and run it when the computer is started.
GNU Mach is only available for Intel i386-compatible architectures
(such as the Pentium) currently. If you have a different architecture
and want to run the GNU Mach microkernel, you will need to port the
kernel and all other software of the system to your machine's
architecture. Porting is an involved process which requires
considerable programming skills, and it is not recommended for the
faint-of-heart. If you have the talent and desire to do a port, contact
<bug-hurd@gnu.org> in order to coordinate the effort.
* Menu:
* Binary Distributions:: Obtaining ready-to-run GNU distributions.
* Compilation:: Building GNU Mach from its source code.
* Configuration:: Configuration options at compile time.
* Cross-Compilation:: Building GNU Mach from another system.
File: mach.info, Node: Binary Distributions, Next: Compilation, Up: Installing
2.1 Binary Distributions
========================
By far the easiest and best way to install GNU Mach and the operating
system is to obtain a GNU binary distribution. The GNU operating
system consists of GNU Mach, the Hurd, the C library and many
applications. Without the GNU operating system, you will only have a
microkernel, which is not very useful by itself, without the other
programs.
Building the whole operating system takes a huge effort, and you are
well advised to not do it yourself, but to get a binary distribution of
the GNU operating system. The distribution also includes a binary of
the GNU Mach microkernel.
Information on how to obtain the GNU system can be found in the Hurd
info manual.
File: mach.info, Node: Compilation, Next: Configuration, Prev: Binary Distributions, Up: Installing
2.2 Compilation
===============
If you already have a running GNU system, and only want to recompile
the kernel, for example to select a different set of included hardware
drivers, you can easily do this. You need the GNU C compiler and MiG,
the Mach interface generator, which both come in their own packages.
Building and installing the kernel is as easy as with any other GNU
software package. The configure script is used to configure the source
and set the compile time options. The compilation is done by running:
make
To install the kernel and its header files, just enter the command:
make install
This will install the kernel into $(prefix)/boot/gnumach and the
header files into $(prefix)/include. You can also only install the
kernel or the header files. For this, the two targets install-kernel
and install-headers are provided.
File: mach.info, Node: Configuration, Next: Cross-Compilation, Prev: Compilation, Up: Installing
2.3 Configuration
=================
The following options can be passed to the configure script as command
line arguments and control what components are built into the kernel, or
where it is installed.
The default for an option is to be disabled, unless otherwise noted.
This table is out-dated. Please see the file `i386/README-Drivers'
and the output of `[GNU Mach]/configure --help=recursive'.
`--prefix PREFIX'
Sets the prefix to PREFIX. The default prefix is the empty
string, which is the correct value for the GNU system. The prefix
is prepended to all file names at installation time.
`--enable-kdb'
Enables the in-kernel debugger. This is only useful if you
actually anticipate debugging the kernel. It is not enabled by
default because it adds considerably to the unpageable memory
footprint of the kernel. *Note Kernel Debugger::.
`--enable-kmsg'
Enables the kernel message device kmsg.
`--enable-lpr'
Enables the parallel port devices lpr%d.
`--enable-floppy'
Enables the PC floppy disk controller devices fd%d.
`--enable-ide'
Enables the IDE controller devices hd%d, hd%ds%d.
The following options enable drivers for various SCSI controller.
SCSI devices are named sd%d (disks) or cd%d (CD ROMs).
`--enable-advansys'
Enables the AdvanSys SCSI controller devices sd%d, cd%d.
`--enable-buslogic'
Enables the BusLogic SCSI controller devices sd%d, cd%d.
`--disable-flashpoint'
Only meaningful in conjunction with `--enable-buslogic'. Omits the
FlshPoint support. This option is enabled by default if
`--enable-buslogic' is specified.
`--enable-u1434f'
Enables the UltraStor 14F/34F SCSI controller devices sd%d, cd%d.
`--enable-ultrastor'
Enables the UltraStor SCSI controller devices sd%d, cd%d.
`--enable-aha152x'
`--enable-aha2825'
Enables the Adaptec AHA-152x/2825 SCSI controller devices sd%d,
cd%d.
`--enable-aha1542'
Enables the Adaptec AHA-1542 SCSI controller devices sd%d, cd%d.
`--enable-aha1740'
Enables the Adaptec AHA-1740 SCSI controller devices sd%d, cd%d.
`--enable-aic7xxx'
Enables the Adaptec AIC7xxx SCSI controller devices sd%d, cd%d.
`--enable-futuredomain'
Enables the Future Domain 16xx SCSI controller devices sd%d, cd%d.
`--enable-in2000'
Enables the Always IN 2000 SCSI controller devices sd%d, cd%d.
`--enable-ncr5380'
`--enable-ncr53c400'
Enables the generic NCR5380/53c400 SCSI controller devices sd%d,
cd%d.
`--enable-ncr53c406a'
Enables the NCR53c406a SCSI controller devices sd%d, cd%d.
`--enable-pas16'
Enables the PAS16 SCSI controller devices sd%d, cd%d.
`--enable-seagate'
Enables the Seagate ST02 and Future Domain TMC-8xx SCSI controller
devices sd%d, cd%d.
`--enable-t128'
`--enable-t128f'
`--enable-t228'
Enables the Trantor T128/T128F/T228 SCSI controller devices sd%d,
cd%d.
`--enable-ncr53c7xx'
Enables the NCR53C7,8xx SCSI controller devices sd%d, cd%d.
`--enable-eatadma'
Enables the EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti,
Alphatronix) SCSI controller devices sd%d, cd%d.
`--enable-eatapio'
Enables the EATA-PIO (old DPT PM2001, PM2012A) SCSI controller
devices sd%d, cd%d.
`--enable-wd7000'
Enables the WD 7000 SCSI controller devices sd%d, cd%d.
`--enable-eata'
Enables the EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant
boards) SCSI controller devices sd%d, cd%d.
`--enable-am53c974'
`--enable-am79c974'
Enables the AM53/79C974 SCSI controller devices sd%d, cd%d.
`--enable-dtc3280'
`--enable-dtc3180'
Enables the DTC3180/3280 SCSI controller devices sd%d, cd%d.
`--enable-ncr53c8xx'
`--enable-dc390w'
`--enable-dc390u'
`--enable-dc390f'
Enables the NCR53C8XX SCSI controller devices sd%d, cd%d.
`--enable-dc390t'
`--enable-dc390'
Enables the Tekram DC-390(T) SCSI controller devices sd%d, cd%d.
`--enable-ppa'
Enables the IOMEGA Parallel Port ZIP drive device sd%d.
`--enable-qlogicfas'
Enables the Qlogic FAS SCSI controller devices sd%d, cd%d.
`--enable-qlogicisp'
Enables the Qlogic ISP SCSI controller devices sd%d, cd%d.
`--enable-gdth'
Enables the GDT SCSI Disk Array controller devices sd%d, cd%d.
The following options enable drivers for various ethernet cards.
NIC device names are usually eth%d, except for the pocket adaptors.
GNU Mach does only autodetect one ethernet card. To enable any
further cards, the source code has to be edited.
`--enable-ne2000'
`--enable-ne1000'
Enables the NE2000/NE1000 ISA netword card devices eth%d.
`--enable-3c503'
`--enable-el2'
Enables the 3Com 503 (Etherlink II) netword card devices eth%d.
`--enable-3c509'
`--enable-3c579'
`--enable-el3'
Enables the 3Com 509/579 (Etherlink III) netword card devices
eth%d.
`--enable-wd80x3'
Enables the WD80X3 netword card devices eth%d.
`--enable-3c501'
`--enable-el1'
Enables the 3COM 501 netword card devices eth%d.
`--enable-ul'
Enables the SMC Ultra netword card devices eth%d.
`--enable-ul32'
Enables the SMC Ultra 32 netword card devices eth%d.
`--enable-hplanplus'
Enables the HP PCLAN+ (27247B and 27252A) netword card devices
eth%d.
`--enable-hplan'
Enables the HP PCLAN (27245 and other 27xxx series) netword card
devices eth%d.
`--enable-3c59x'
`--enable-3c90x'
`--enable-vortex'
Enables the 3Com 590/900 series (592/595/597/900/905)
"Vortex/Boomerang" netword card devices eth%d.
`--enable-seeq8005'
Enables the Seeq8005 netword card devices eth%d.
`--enable-hp100'
`--enable-hpj2577'
`--enable-hpj2573'
`--enable-hp27248b'
`--enable-hp2585'
Enables the HP 10/100VG PCLAN (ISA, EISA, PCI) netword card devices
eth%d.
`--enable-ac3200'
Enables the Ansel Communications EISA 3200 netword card devices
eth%d.
`--enable-e2100'
Enables the Cabletron E21xx netword card devices eth%d.
`--enable-at1700'
Enables the AT1700 (Fujitsu 86965) netword card devices eth%d.
`--enable-eth16i'
`--enable-eth32'
Enables the ICL EtherTeam 16i/32 netword card devices eth%d.
`--enable-znet'
`--enable-znote'
Enables the Zenith Z-Note netword card devices eth%d.
`--enable-eexpress'
Enables the EtherExpress 16 netword card devices eth%d.
`--enable-eexpresspro'
Enables the EtherExpressPro netword card devices eth%d.
`--enable-eexpresspro100'
Enables the Intel EtherExpressPro PCI 10+/100B/100+ netword card
devices eth%d.
`--enable-depca'
`--enable-de100'
`--enable-de101'
`--enable-de200'
`--enable-de201'
`--enable-de202'
`--enable-de210'
`--enable-de422'
Enables the DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422
netword card devices eth%d.
`--enable-ewrk3'
`--enable-de203'
`--enable-de204'
`--enable-de205'
Enables the EtherWORKS 3 (DE203, DE204, DE205) netword card devices
eth%d.
`--enable-de4x5'
`--enable-de425'
`--enable-de434'
`--enable-435'
`--enable-de450'
`--enable-500'
Enables the DE425, DE434, DE435, DE450, DE500 netword card devices
eth%d.
`--enable-apricot'
Enables the Apricot XEN-II on board ethernet netword card devices
eth%d.
`--enable-wavelan'
Enables the AT&T WaveLAN & DEC RoamAbout DS netword card devices
eth%d.
`--enable-3c507'
`--enable-el16'
Enables the 3Com 507 netword card devices eth%d.
`--enable-3c505'
`--enable-elplus'
Enables the 3Com 505 netword card devices eth%d.
`--enable-de600'
Enables the D-Link DE-600 netword card devices eth%d.
`--enable-de620'
Enables the D-Link DE-620 netword card devices eth%d.
`--enable-skg16'
Enables the Schneider & Koch G16 netword card devices eth%d.
`--enable-ni52'
Enables the NI5210 netword card devices eth%d.
`--enable-ni65'
Enables the NI6510 netword card devices eth%d.
`--enable-atp'
Enables the AT-LAN-TEC/RealTek pocket adaptor netword card devices
atp%d.
`--enable-lance'
`--enable-at1500'
`--enable-ne2100'
Enables the AMD LANCE and PCnet (AT1500 and NE2100) netword card
devices eth%d.
`--enable-elcp'
`--enable-tulip'
Enables the DECchip Tulip (dc21x4x) PCI netword card devices eth%d.
`--enable-fmv18x'
Enables the FMV-181/182/183/184 netword card devices eth%d.
`--enable-3c515'
Enables the 3Com 515 ISA Fast EtherLink netword card devices eth%d.
`--enable-pcnet32'
Enables the AMD PCI PCnet32 (PCI bus NE2100 cards) netword card
devices eth%d.
`--enable-ne2kpci'
Enables the PCI NE2000 netword card devices eth%d.
`--enable-yellowfin'
Enables the Packet Engines Yellowfin Gigabit-NIC netword card
devices eth%d.
`--enable-rtl8139'
`--enable-rtl8129'
Enables the RealTek 8129/8139 (not 8019/8029!) netword card
devices eth%d.
`--enable-epic'
`--enable-epic100'
Enables the SMC 83c170/175 EPIC/100 (EtherPower II) netword card
devices eth%d.
`--enable-tlan'
Enables the TI ThunderLAN netword card devices eth%d.
`--enable-viarhine'
Enables the VIA Rhine netword card devices eth%d.
`--enable-hamachi'
Enables the Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet
devices eth%d.
`--enable-intel-gige'
Enables the Intel PCI Gigabit Ethernet devices eth%d.
`--enable-myson803'
Enables the Myson MTD803 Ethernet adapter series devices eth%d.
`--enable-natsemi'
Enables the National Semiconductor DP8381x series PCI Ethernet
devices eth%d.
`--enable-ns820'
Enables the National Semiconductor DP8382x series PCI Ethernet
devices eth%d.
`--enable-starfire'
Enables the Adaptec Starfire network adapter devices eth%d.
`--enable-sundance'
Enables the Sundance ST201 "Alta" PCI Ethernet devices eth%d.
`--enable-winbond-840'
Enables the Winbond W89c840 PCI Ethernet devices eth%d.
The following options either enable drivers for supported PCMCIA
bridges or control the overall behaviour of the GNU Mach PCMCIA core.
To make use of GNU Mach PCMCIA support you need to have the
corresponding userland applications (GNU Mach Card Services) installed.
`--enable-i82365'
Enables the driver for the Intel 82365 and compatible PC Card
controllers, and Yenta-compatible PCI-to-CardBus controllers.
`--enable-pcmcia-isa'
Enables ISA-bus related bits in the GNU Mach PCMCIA core. This is
generally a good idea, since it does not only have effect if your
PC Card bridge is attached to the ISA bus, but provides more (ISA)
interrupts to the Card Services for it to assign to the cards in
turn.
The following options enable drivers for supported PCMCIA Ethernet
controllers. NIC device names are usually eth%d.
`--enable-3c574_cs'
Enables the PCMCIA ethernet driver for the 3Com 3c574 "RoadRunner".
`--enable-3c589_cs'
Enables the driver for the 3Com 3c589 PCMCIA card.
`--enable-axnet_cs'
Enables the driver for the Asix AX88190-based PCMCIA cards.
`--enable-fmvj18x_cs'
Enables the driver for PCMCIA cards with the fmvj18x chipset.
`--enable-nmclan_cs'
Enables the driver for the New Media Ethernet LAN PCMCIA cards.
`--enable-pcnet_cs'
Enables the driver for NS8390-based PCMCIA cards.
This driver supports the D-Link DE-650 and Linksys EthernetCard
cards, the newer D-Link and Linksys combo cards, Accton EN2212
cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
mode. It will also handle the Socket EA card in either mode.
`--enable-smc91c92_cs'
Enables the driver for SMC91c92-based PCMCIA cards.
`--enable-xirc2ps_cs'
Enables the driver for Xircom CreditCard and Realport PCMCIA
ethernet adapters.
The following options enable drivers for supported PCMCIA Wireless
LAN network controllers. NIC device names are usually eth%d.
Please mind, that you need to have some userland applications (the
GNU Mach Wireless Tools) installed, in order to make use of these
devices.
`--enable-orinoco_cs'
Enables the driver for the Hermes or Prism 2 chipset based PCMCIA
wireless adapters, with Lucent/Agere, Intersil or Symbol firmware.
This driver is suitable for PCMCIA wireless adapters, such as the
Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/EnteraSys
RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). It
should also be usable on various Prism II based cards such as the
Linksys, D-Link and Farallon Skyline. It should also work on Symbol
cards such as the 3Com AirConnect and Ericsson WLAN.
File: mach.info, Node: Cross-Compilation, Prev: Configuration, Up: Installing
2.4 Cross-Compilation
=====================
Another way to install the kernel is to use an existing operating system
in order to compile the kernel binary. This is called
"cross-compiling", because it is done between two different platforms.
If the pre-built kernels are not working for you, and you can't ask
someone to compile a custom kernel for your machine, this is your last
chance to get a kernel that boots on your hardware.
Luckily, the kernel does have light dependencies. You don't even
need a cross compiler if your build machine has a compiler and is the
same architecture as the system you want to run GNU Mach on.
You need a cross-mig, though.
XXX More info needed.
File: mach.info, Node: Bootstrap, Next: Inter Process Communication, Prev: Installing, Up: Top
3 Bootstrap
***********
Bootstrapping(1) is the procedure by which your machine loads the
microkernel and transfers control to the operating system.
* Menu:
* Bootloader:: Starting the microkernel, or other OSes.
* Modules:: Starting the first task of the OS.
---------- Footnotes ----------
(1) The term "bootstrapping" refers to a Dutch legend about a boy
who was able to fly by pulling himself up by his bootstraps. In
computers, this term refers to any process where a simple system
activates a more complicated system.
File: mach.info, Node: Bootloader, Next: Modules, Up: Bootstrap
3.1 Bootloader
==============
The "bootloader" is the first software that runs on your machine. Many
hardware architectures have a very simple startup routine which reads a
very simple bootloader from the beginning of the internal hard disk,
then transfers control to it. Other architectures have startup
routines which are able to understand more of the contents of the hard
disk, and directly start a more advanced bootloader.
Currently, "GRUB"(1) is the preferred GNU bootloader. GRUB provides
advanced functionality, and is capable of loading several different
kernels (such as Mach, Linux, DOS, and the *BSD family). *Note
Introduction: (grub)Top.
GNU Mach conforms to the Multiboot specification which defines an
interface between the bootloader and the components that run very early
at startup. GNU Mach can be started by any bootloader which supports
the multiboot standard. After the bootloader loaded the kernel image to
a designated address in the system memory, it jumps into the startup
code of the kernel. This code initializes the kernel and detects the
available hardware devices. Afterwards, the first system task is
started. *Note Overview: (multiboot)Top.
---------- Footnotes ----------
(1) The GRand Unified Bootloader, available from
`http://www.uruk.org/grub/'.
File: mach.info, Node: Modules, Prev: Bootloader, Up: Bootstrap
3.2 Modules
===========
Because the microkernel does not provide filesystem support and other
features necessary to load the first system task from a storage medium,
the first task is loaded by the bootloader as a module to a specified
address. In the GNU system, this first program is the `serverboot'
executable. GNU Mach inserts the host control port and the device
master port into this task and appends the port numbers to the command
line before executing it.
The `serverboot' program is responsible for loading and executing
the rest of the Hurd servers. Rather than containing specific
instructions for starting the Hurd, it follows general steps given in a
user-supplied boot script.
XXX More about boot scripts.
File: mach.info, Node: Inter Process Communication, Next: Virtual Memory Interface, Prev: Bootstrap, Up: Top
4 Inter Process Communication
*****************************
This chapter describes the details of the Mach IPC system. First the
actual calls concerned with sending and receiving messages are
discussed, then the details of the port system are described in detail.
* Menu:
* Major Concepts:: The concepts behind the Mach IPC system.
* Messaging Interface:: Composing, sending and receiving messages.
* Port Manipulation Interface:: Manipulating ports, port rights, port sets.
File: mach.info, Node: Major Concepts, Next: Messaging Interface, Up: Inter Process Communication
4.1 Major Concepts
==================
The Mach kernel provides message-oriented, capability-based interprocess
communication. The interprocess communication (IPC) primitives
efficiently support many different styles of interaction, including
remote procedure calls (RPC), object-oriented distributed programming,
streaming of data, and sending very large amounts of data.
The IPC primitives operate on three abstractions: messages, ports,
and port sets. User tasks access all other kernel services and
abstractions via the IPC primitives.
The message primitives let tasks send and receive messages. Tasks
send messages to ports. Messages sent to a port are delivered reliably
(messages may not be lost) and are received in the order in which they
were sent. Messages contain a fixed-size header and a variable amount
of typed data following the header. The header describes the
destination and size of the message.
The IPC implementation makes use of the VM system to efficiently
transfer large amounts of data. The message body can contain the
address of a region in the sender's address space which should be
transferred as part of the message. When a task receives a message
containing an out-of-line region of data, the data appears in an unused
portion of the receiver's address space. This transmission of
out-of-line data is optimized so that sender and receiver share the
physical pages of data copy-on-write, and no actual data copy occurs
unless the pages are written. Regions of memory up to the size of a
full address space may be sent in this manner.
Ports hold a queue of messages. Tasks operate on a port to send and
receive messages by exercising capabilities for the port. Multiple
tasks can hold send capabilities, or rights, for a port. Tasks can also
hold send-once rights, which grant the ability to send a single message.
Only one task can hold the receive capability, or receive right, for a
port. Port rights can be transferred between tasks via messages. The
sender of a message can specify in the message body that the message
contains a port right. If a message contains a receive right for a
port, then the receive right is removed from the sender of the message
and the right is transferred to the receiver of the message. While the
receive right is in transit, tasks holding send rights can still send
messages to the port, and they are queued until a task acquires the
receive right and uses it to receive the messages.
Tasks can receive messages from ports and port sets. The port set
abstraction allows a single thread to wait for a message from any of
several ports. Tasks manipulate port sets with a capability, or
port-set right, which is taken from the same space as the port
capabilities. The port-set right may not be transferred in a message.
A port set holds receive rights, and a receive operation on a port set
blocks waiting for a message sent to any of the constituent ports. A
port may not belong to more than one port set, and if a port is a member
of a port set, the holder of the receive right can't receive directly
from the port.
Port rights are a secure, location-independent way of naming ports.
The port queue is a protected data structure, only accessible via the
kernel's exported message primitives. Rights are also protected by the
kernel; there is no way for a malicious user task to guess a port name
and send a message to a port to which it shouldn't have access. Port
rights do not carry any location information. When a receive right for
a port moves from task to task, and even between tasks on different
machines, the send rights for the port remain unchanged and continue to
function.
File: mach.info, Node: Messaging Interface, Next: Port Manipulation Interface, Prev: Major Concepts, Up: Inter Process Communication
4.2 Messaging Interface
=======================
This section describes how messages are composed, sent and received
within the Mach IPC system.
* Menu:
* Mach Message Call:: Sending and receiving messages.
* Message Format:: The format of Mach messages.
* Exchanging Port Rights:: Sending and receiving port rights.
* Memory:: Passing memory regions in messages.
* Message Send:: Sending messages.
* Message Receive:: Receiving messages.
* Atomicity:: Atomicity of port rights.
File: mach.info, Node: Mach Message Call, Next: Message Format, Up: Messaging Interface
4.2.1 Mach Message Call
-----------------------
To use the `mach_msg' call, you can include the header files
`mach/port.h' and `mach/message.h'.
-- Function: mach_msg_return_t mach_msg (mach_msg_header_t *MSG,
mach_msg_option_t OPTION, mach_msg_size_t SEND_SIZE,
mach_msg_size_t RCV_SIZE, mach_port_t RCV_NAME,
mach_msg_timeout_t TIMEOUT, mach_port_t NOTIFY)
The `mach_msg' function is used to send and receive messages. Mach
messages contain typed data, which can include port rights and
references to large regions of memory.
MSG is the address of a buffer in the caller's address space.
Message buffers should be aligned on long-word boundaries. The
message options OPTION are bit values, combined with bitwise-or.
One or both of `MACH_SEND_MSG' and `MACH_RCV_MSG' should be used.
Other options act as modifiers. When sending a message, SEND_SIZE
specifies the size of the message buffer. Otherwise zero should be
supplied. When receiving a message, RCV_SIZE specifies the size
of the message buffer. Otherwise zero should be supplied. When
receiving a message, RCV_NAME specifies the port or port set.
Otherwise `MACH_PORT_NULL' should be supplied. When using the
`MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT' options, TIMEOUT
specifies the time in milliseconds to wait before giving up.
Otherwise `MACH_MSG_TIMEOUT_NONE' should be supplied. When using
the `MACH_SEND_NOTIFY', `MACH_SEND_CANCEL', and `MACH_RCV_NOTIFY'
options, NOTIFY specifies the port used for the notification.
Otherwise `MACH_PORT_NULL' should be supplied.
If the option argument is `MACH_SEND_MSG', it sends a message. The
SEND_SIZE argument specifies the size of the message to send. The
`msgh_remote_port' field of the message header specifies the
destination of the message.
If the option argument is `MACH_RCV_MSG', it receives a message.
The RCV_SIZE argument specifies the size of the message buffer
that will receive the message; messages larger than RCV_SIZE are
not received. The RCV_NAME argument specifies the port or port
set from which to receive.
If the option argument is `MACH_SEND_MSG|MACH_RCV_MSG', then
`mach_msg' does both send and receive operations. If the send
operation encounters an error (any return code other than
`MACH_MSG_SUCCESS'), then the call returns immediately without
attempting the receive operation. Semantically the combined call
is equivalent to separate send and receive calls, but it saves a
system call and enables other internal optimizations.
If the option argument specifies neither `MACH_SEND_MSG' nor
`MACH_RCV_MSG', then `mach_msg' does nothing.
Some options, like `MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT',
share a supporting argument. If these options are used together,
they make independent use of the supporting argument's value.
-- Data type: mach_msg_timeout_t
This is a `natural_t' used by the timeout mechanism. The units are
milliseconds. The value to be used when there is no timeout is
`MACH_MSG_TIMEOUT_NONE'.
File: mach.info, Node: Message Format, Next: Exchanging Port Rights, Prev: Mach Message Call, Up: Messaging Interface
4.2.2 Message Format
--------------------
A Mach message consists of a fixed size message header, a
`mach_msg_header_t', followed by zero or more data items. Data items
are typed. Each item has a type descriptor followed by the actual data
(or the address of the data, for out-of-line memory regions).
The following data types are related to Mach ports:
-- Data type: mach_port_t
The `mach_port_t' data type is an unsigned integer type which
represents a port name in the task's port name space. In GNU
Mach, this is an `unsigned int'.
The following data types are related to Mach messages:
-- Data type: mach_msg_bits_t
The `mach_msg_bits_t' data type is an `unsigned int' used to store
various flags for a message.
-- Data type: mach_msg_size_t
The `mach_msg_size_t' data type is an `unsigned int' used to store
the size of a message.
-- Data type: mach_msg_id_t
The `mach_msg_id_t' data type is an `integer_t' typically used to
convey a function or operation id for the receiver.
-- Data type: mach_msg_header_t
This structure is the start of every message in the Mach IPC
system. It has the following members:
`mach_msg_bits_t msgh_bits'
The `msgh_bits' field has the following bits defined, all
other bits should be zero:
`MACH_MSGH_BITS_REMOTE_MASK'
`MACH_MSGH_BITS_LOCAL_MASK'
The remote and local bits encode `mach_msg_type_name_t'
values that specify the port rights in the
`msgh_remote_port' and `msgh_local_port' fields. The
remote value must specify a send or send-once right for
the destination of the message. If the local value
doesn't specify a send or send-once right for the
message's reply port, it must be zero and
msgh_local_port must be `MACH_PORT_NULL'.
`MACH_MSGH_BITS_COMPLEX'
The complex bit must be specified if the message body
contains port rights or out-of-line memory regions. If
it is not specified, then the message body carries no
port rights or memory, no matter what the type
descriptors may seem to indicate.
`MACH_MSGH_BITS_REMOTE' and `MACH_MSGH_BITS_LOCAL' macros
return the appropriate `mach_msg_type_name_t' values, given a
`msgh_bits' value. The `MACH_MSGH_BITS' macro constructs a
value for `msgh_bits', given two `mach_msg_type_name_t'
values.
`mach_msg_size_t msgh_size'
The `msgh_size' field in the header of a received message
contains the message's size. The message size, a byte
quantity, includes the message header, type descriptors, and
in-line data. For out-of-line memory regions, the message
size includes the size of the in-line address, not the size
of the actual memory region. There are no arbitrary limits
on the size of a Mach message, the number of data items in a
message, or the size of the data items.
`mach_port_t msgh_remote_port'
The `msgh_remote_port' field specifies the destination port
of the message. The field must carry a legitimate send or
send-once right for a port.
`mach_port_t msgh_local_port'
The `msgh_local_port' field specifies an auxiliary port right,
which is conventionally used as a reply port by the recipient
of the message. The field must carry a send right, a
send-once right, `MACH_PORT_NULL', or `MACH_PORT_DEAD'.
`mach_port_seqno_t msgh_seqno'
The `msgh_seqno' field provides a sequence number for the
message. It is only valid in received messages; its value in
sent messages is overwritten.
`mach_msg_id_t msgh_id'
The `mach_msg' call doesn't use the `msgh_id' field, but it
conventionally conveys an operation or function id.
-- Macro: mach_msg_bits_t MACH_MSGH_BITS (mach_msg_type_name_t REMOTE,
mach_msg_type_name_t LOCAL)
This macro composes two `mach_msg_type_name_t' values that specify
the port rights in the `msgh_remote_port' and `msgh_local_port'
fields of a `mach_msg' call into an appropriate `mach_msg_bits_t'
value.
-- Macro: mach_msg_type_name_t MACH_MSGH_BITS_REMOTE
(mach_msg_bits_t BITS)
This macro extracts the `mach_msg_type_name_t' value for the remote
port right in a `mach_msg_bits_t' value.
-- Macro: mach_msg_type_name_t MACH_MSGH_BITS_LOCAL
(mach_msg_bits_t BITS)
This macro extracts the `mach_msg_type_name_t' value for the local
port right in a `mach_msg_bits_t' value.
-- Macro: mach_msg_bits_t MACH_MSGH_BITS_PORTS (mach_msg_bits_t BITS)
This macro extracts the `mach_msg_bits_t' component consisting of
the `mach_msg_type_name_t' values for the remote and local port
right in a `mach_msg_bits_t' value.
-- Macro: mach_msg_bits_t MACH_MSGH_BITS_OTHER (mach_msg_bits_t BITS)
This macro extracts the `mach_msg_bits_t' component consisting of
everything except the `mach_msg_type_name_t' values for the remote
and local port right in a `mach_msg_bits_t' value.
Each data item has a type descriptor, a `mach_msg_type_t' or a
`mach_msg_type_long_t'. The `mach_msg_type_long_t' type descriptor
allows larger values for some fields. The `msgtl_header' field in the
long descriptor is only used for its inline, longform, and deallocate
bits.
-- Data type: mach_msg_type_name_t
This is an `unsigned int' and can be used to hold the `msgt_name'
component of the `mach_msg_type_t' and `mach_msg_type_long_t'
structure.
-- Data type: mach_msg_type_size_t
This is an `unsigned int' and can be used to hold the `msgt_size'
component of the `mach_msg_type_t' and `mach_msg_type_long_t'
structure.
-- Data type: mach_msg_type_number_t
This is an `natural_t' and can be used to hold the `msgt_number'
component of the `mach_msg_type_t' and `mach_msg_type_long_t'
structure.
-- Data type: mach_msg_type_t
This structure has the following members:
`unsigned int msgt_name : 8'
The `msgt_name' field specifies the data's type. The
following types are predefined:
`MACH_MSG_TYPE_UNSTRUCTURED'
`MACH_MSG_TYPE_BIT'
`MACH_MSG_TYPE_BOOLEAN'
`MACH_MSG_TYPE_INTEGER_16'
`MACH_MSG_TYPE_INTEGER_32'
`MACH_MSG_TYPE_CHAR'
`MACH_MSG_TYPE_BYTE'
`MACH_MSG_TYPE_INTEGER_8'
`MACH_MSG_TYPE_REAL'
`MACH_MSG_TYPE_STRING'
`MACH_MSG_TYPE_STRING_C'
`MACH_MSG_TYPE_PORT_NAME'
The following predefined types specify port rights, and
receive special treatment. The next section discusses these
types in detail. The type `MACH_MSG_TYPE_PORT_NAME'
describes port right names, when no rights are being
transferred, but just names. For this purpose, it should be
used in preference to `MACH_MSG_TYPE_INTEGER_32'.
`MACH_MSG_TYPE_MOVE_RECEIVE'
`MACH_MSG_TYPE_MOVE_SEND'
`MACH_MSG_TYPE_MOVE_SEND_ONCE'
`MACH_MSG_TYPE_COPY_SEND'
`MACH_MSG_TYPE_MAKE_SEND'
`MACH_MSG_TYPE_MAKE_SEND_ONCE'
`msgt_size : 8'
The `msgt_size' field specifies the size of each datum, in
bits. For example, the msgt_size of
`MACH_MSG_TYPE_INTEGER_32' data is 32.
`msgt_number : 12'
The `msgt_number' field specifies how many data elements
comprise the data item. Zero is a legitimate number.
The total length specified by a type descriptor is
`(msgt_size * msgt_number)', rounded up to an integral number
of bytes. In-line data is then padded to an integral number
of long-words. This ensures that type descriptors always
start on long-word boundaries. It implies that message sizes
are always an integral multiple of a long-word's size.
`msgt_inline : 1'
The `msgt_inline' bit specifies, when `FALSE', that the data
actually resides in an out-of-line region. The address of
the memory region (a `vm_offset_t' or `vm_address_t') follows
the type descriptor in the message body. The `msgt_name',
`msgt_size', and `msgt_number' fields describe the memory
region, not the address.
`msgt_longform : 1'
The `msgt_longform' bit specifies, when `TRUE', that this type
descriptor is a `mach_msg_type_long_t' instead of a
`mach_msg_type_t'. The `msgt_name', `msgt_size', and
`msgt_number' fields should be zero. Instead, `mach_msg' uses
the following `msgtl_name', `msgtl_size', and `msgtl_number'
fields.
`msgt_deallocate : 1'
The `msgt_deallocate' bit is used with out-of-line regions.
When `TRUE', it specifies that the memory region should be
deallocated from the sender's address space (as if with
`vm_deallocate') when the message is sent.
`msgt_unused : 1'
The `msgt_unused' bit should be zero.
-- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY (mach_msg_type_name_t type)
This macro returns `TRUE' if the given type name specifies a port
type, otherwise it returns `FALSE'.
-- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_SEND (mach_msg_type_name_t
type)
This macro returns `TRUE' if the given type name specifies a port
type with a send or send-once right, otherwise it returns `FALSE'.
-- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_RIGHT (mach_msg_type_name_t
type)
This macro returns `TRUE' if the given type name specifies a port
right type which is moved, otherwise it returns `FALSE'.
-- Data type: mach_msg_type_long_t
This structure has the following members:
`mach_msg_type_t msgtl_header'
Same meaning as `msgt_header'.
`unsigned short msgtl_name'
Same meaning as `msgt_name'.
`unsigned short msgtl_size'
Same meaning as `msgt_size'.
`unsigned int msgtl_number'
Same meaning as `msgt_number'.
File: mach.info, Node: Exchanging Port Rights, Next: Memory, Prev: Message Format, Up: Messaging Interface
4.2.3 Exchanging Port Rights
----------------------------
Each task has its own space of port rights. Port rights are named with
positive integers. Except for the reserved values
`MACH_PORT_NULL (0)'(1) and `MACH_PORT_DEAD (~0)', this is a full 32-bit
name space. When the kernel chooses a name for a new right, it is free
to pick any unused name (one which denotes no right) in the space.
There are five basic kinds of rights: receive rights, send rights,
send-once rights, port-set rights, and dead names. Dead names are not
capabilities. They act as place-holders to prevent a name from being
otherwise used.
A port is destroyed, or dies, when its receive right is deallocated.
When a port dies, send and send-once rights for the port turn into dead
names. Any messages queued at the port are destroyed, which deallocates
the port rights and out-of-line memory in the messages.
Tasks may hold multiple user-references for send rights and dead
names. When a task receives a send right which it already holds, the
kernel increments the right's user-reference count. When a task
deallocates a send right, the kernel decrements its user-reference
count, and the task only loses the send right when the count goes to
zero.
Send-once rights always have a user-reference count of one, although
a port can have multiple send-once rights, because each send-once right
held by a task has a different name. In contrast, when a task holds
send rights or a receive right for a port, the rights share a single
name.
A message body can carry port rights; the `msgt_name' (`msgtl_name')
field in a type descriptor specifies the type of port right and how the
port right is to be extracted from the caller. The values
`MACH_PORT_NULL' and `MACH_PORT_DEAD' are always valid in place of a
port right in a message body. In a sent message, the following
`msgt_name' values denote port rights:
`MACH_MSG_TYPE_MAKE_SEND'
The message will carry a send right, but the caller must supply a
receive right. The send right is created from the receive right,
and the receive right's make-send count is incremented.
`MACH_MSG_TYPE_COPY_SEND'
The message will carry a send right, and the caller should supply
a send right. The user reference count for the supplied send
right is not changed. The caller may also supply a dead name and
the receiving task will get `MACH_PORT_DEAD'.
`MACH_MSG_TYPE_MOVE_SEND'
The message will carry a send right, and the caller should supply
a send right. The user reference count for the supplied send
right is decremented, and the right is destroyed if the count
becomes zero. Unless a receive right remains, the name becomes
available for recycling. The caller may also supply a dead name,
which loses a user reference, and the receiving task will get
`MACH_PORT_DEAD'.
`MACH_MSG_TYPE_MAKE_SEND_ONCE'
The message will carry a send-once right, but the caller must
supply a receive right. The send-once right is created from the
receive right.
`MACH_MSG_TYPE_MOVE_SEND_ONCE'
The message will carry a send-once right, and the caller should
supply a send-once right. The caller loses the supplied send-once
right. The caller may also supply a dead name, which loses a user
reference, and the receiving task will get `MACH_PORT_DEAD'.
`MACH_MSG_TYPE_MOVE_RECEIVE'
The message will carry a receive right, and the caller should
supply a receive right. The caller loses the supplied receive
right, but retains any send rights with the same name.
If a message carries a send or send-once right, and the port dies
while the message is in transit, then the receiving task will get
`MACH_PORT_DEAD' instead of a right. The following `msgt_name' values
in a received message indicate that it carries port rights:
`MACH_MSG_TYPE_PORT_SEND'
This name is an alias for `MACH_MSG_TYPE_MOVE_SEND'. The message
carried a send right. If the receiving task already has send
and/or receive rights for the port, then that name for the port
will be reused. Otherwise, the new right will have a new name.
If the task already has send rights, it gains a user reference for
the right (unless this would cause the user-reference count to
overflow). Otherwise, it acquires the send right, with a
user-reference count of one.
`MACH_MSG_TYPE_PORT_SEND_ONCE'
This name is an alias for `MACH_MSG_TYPE_MOVE_SEND_ONCE'. The
message carried a send-once right. The right will have a new name.
`MACH_MSG_TYPE_PORT_RECEIVE'
This name is an alias for `MACH_MSG_TYPE_MOVE_RECEIVE'. The
message carried a receive right. If the receiving task already
has send rights for the port, then that name for the port will be
reused. Otherwise, the right will have a new name. The make-send
count of the receive right is reset to zero, but the port retains
other attributes like queued messages, extant send and send-once
rights, and requests for port-destroyed and no-senders
notifications.
When the kernel chooses a new name for a port right, it can choose
any name, other than `MACH_PORT_NULL' and `MACH_PORT_DEAD', which is
not currently being used for a port right or dead name. It might
choose a name which at some previous time denoted a port right, but is
currently unused.
---------- Footnotes ----------
(1) In the Hurd system, we don't make the assumption that
`MACH_PORT_NULL' is zero and evaluates to false, but rather compare
port names to `MACH_PORT_NULL' explicitely
File: mach.info, Node: Memory, Next: Message Send, Prev: Exchanging Port Rights, Up: Messaging Interface
4.2.4 Memory
------------
A message body can contain the address of a region in the sender's
address space which should be transferred as part of the message. The
message carries a logical copy of the memory, but the kernel uses VM
techniques to defer any actual page copies. Unless the sender or the
receiver modifies the data, the physical pages remain shared.
An out-of-line transfer occurs when the data's type descriptor
specifies `msgt_inline' as `FALSE'. The address of the memory region (a
`vm_offset_t' or `vm_address_t') should follow the type descriptor in
the message body. The type descriptor and the address contribute to
the message's size (`send_size', `msgh_size'). The out-of-line data
does not contribute to the message's size.
The name, size, and number fields in the type descriptor describe the
type and length of the out-of-line data, not the in-line address.
Out-of-line memory frequently requires long type descriptors
(`mach_msg_type_long_t'), because the `msgt_number' field is too small
to describe a page of 4K bytes.
Out-of-line memory arrives somewhere in the receiver's address space
as new memory. It has the same inheritance and protection attributes as
newly `vm_allocate''d memory. The receiver has the responsibility of
deallocating (with `vm_deallocate') the memory when it is no longer
needed. Security-conscious receivers should exercise caution when
using out-of-line memory from untrustworthy sources, because the memory
may be backed by an unreliable memory manager.
Null out-of-line memory is legal. If the out-of-line region size is
zero (for example, because `msgtl_number' is zero), then the region's
specified address is ignored. A received null out-of-line memory
region always has a zero address.
Unaligned addresses and region sizes that are not page multiples are
legal. A received message can also contain memory with unaligned
addresses and funny sizes. In the general case, the first and last
pages in the new memory region in the receiver do not contain only data
from the sender, but are partly zero.(1) The received address points
to the start of the data in the first page. This possibility doesn't
complicate deallocation, because `vm_deallocate' does the right thing,
rounding the start address down and the end address up to deallocate
all arrived pages.
Out-of-line memory has a deallocate option, controlled by the
`msgt_deallocate' bit. If it is `TRUE' and the out-of-line memory
region is not null, then the region is implicitly deallocated from the
sender, as if by `vm_deallocate'. In particular, the start and end
addresses are rounded so that every page overlapped by the memory
region is deallocated. The use of `msgt_deallocate' effectively
changes the memory copy into a memory movement. In a received message,
`msgt_deallocate' is `TRUE' in type descriptors for out-of-line memory.
Out-of-line memory can carry port rights.
---------- Footnotes ----------
(1) Sending out-of-line memory with a non-page-aligned address, or a
size which is not a page multiple, works but with a caveat. The extra
bytes in the first and last page of the received memory are not zeroed,
so the receiver can peek at more data than the sender intended to
transfer. This might be a security problem for the sender.
File: mach.info, Node: Message Send, Next: Message Receive, Prev: Memory, Up: Messaging Interface
4.2.5 Message Send
------------------
The send operation queues a message to a port. The message carries a
copy of the caller's data. After the send, the caller can freely modify
the message buffer or the out-of-line memory regions and the message
contents will remain unchanged.
Message delivery is reliable and sequenced. Messages are not lost,
and messages sent to a port, from a single thread, are received in the
order in which they were sent.
If the destination port's queue is full, then several things can
happen. If the message is sent to a send-once right (`msgh_remote_port'
carries a send-once right), then the kernel ignores the queue limit and
delivers the message. Otherwise the caller blocks until there is room
in the queue, unless the `MACH_SEND_TIMEOUT' or `MACH_SEND_NOTIFY'
options are used. If a port has several blocked senders, then any of
them may queue the next message when space in the queue becomes
available, with the proviso that a blocked sender will not be
indefinitely starved.
These options modify `MACH_SEND_MSG'. If `MACH_SEND_MSG' is not
also specified, they are ignored.
`MACH_SEND_TIMEOUT'
The timeout argument should specify a maximum time (in
milliseconds) for the call to block before giving up.(1) If the
message can't be queued before the timeout interval elapses, then
the call returns `MACH_SEND_TIMED_OUT'. A zero timeout is
legitimate.
`MACH_SEND_NOTIFY'
The notify argument should specify a receive right for a notify
port. If the send were to block, then instead the message is
queued, `MACH_SEND_WILL_NOTIFY' is returned, and a msg-accepted
notification is requested. If `MACH_SEND_TIMEOUT' is also
specified, then `MACH_SEND_NOTIFY' doesn't take effect until the
timeout interval elapses.
With `MACH_SEND_NOTIFY', a task can forcibly queue to a send right
one message at a time. A msg-accepted notification is sent to the
the notify port when another message can be forcibly queued. If
an attempt is made to use `MACH_SEND_NOTIFY' before then, the call
returns a `MACH_SEND_NOTIFY_IN_PROGRESS' error.
The msg-accepted notification carries the name of the send right.
If the send right is deallocated before the msg-accepted
notification is generated, then the msg-accepted notification
carries the value `MACH_PORT_NULL'. If the destination port is
destroyed before the notification is generated, then a send-once
notification is generated instead.
`MACH_SEND_INTERRUPT'
If specified, the `mach_msg' call will return
`MACH_SEND_INTERRUPTED' if a software interrupt aborts the call.
Otherwise, the send operation will be retried.
`MACH_SEND_CANCEL'
The notify argument should specify a receive right for a notify
port. If the send operation removes the destination port right
from the caller, and the removed right had a dead-name request
registered for it, and notify is the notify port for the dead-name
request, then the dead-name request may be silently canceled
(instead of resulting in a port-deleted notification).
This option is typically used to cancel a dead-name request made
with the `MACH_RCV_NOTIFY' option. It should only be used as an
optimization.
The send operation can generate the following return codes. These
return codes imply that the call did nothing:
`MACH_SEND_MSG_TOO_SMALL'
The specified send_size was smaller than the minimum size for a
message.
`MACH_SEND_NO_BUFFER'
A resource shortage prevented the kernel from allocating a message
buffer.
`MACH_SEND_INVALID_DATA'
The supplied message buffer was not readable.
`MACH_SEND_INVALID_HEADER'
The `msgh_bits' value was invalid.
`MACH_SEND_INVALID_DEST'
The `msgh_remote_port' value was invalid.
`MACH_SEND_INVALID_REPLY'
The `msgh_local_port' value was invalid.
`MACH_SEND_INVALID_NOTIFY'
When using `MACH_SEND_CANCEL', the notify argument did not denote a
valid receive right.
These return codes imply that some or all of the message was
destroyed:
`MACH_SEND_INVALID_MEMORY'
The message body specified out-of-line data that was not readable.
`MACH_SEND_INVALID_RIGHT'
The message body specified a port right which the caller didn't
possess.
`MACH_SEND_INVALID_TYPE'
A type descriptor was invalid.
`MACH_SEND_MSG_TOO_SMALL'
The last data item in the message ran over the end of the message.
These return codes imply that the message was returned to the caller
with a pseudo-receive operation:
`MACH_SEND_TIMED_OUT'
The timeout interval expired.
`MACH_SEND_INTERRUPTED'
A software interrupt occurred.
`MACH_SEND_INVALID_NOTIFY'
When using `MACH_SEND_NOTIFY', the notify argument did not denote a
valid receive right.
`MACH_SEND_NO_NOTIFY'
A resource shortage prevented the kernel from setting up a
msg-accepted notification.
`MACH_SEND_NOTIFY_IN_PROGRESS'
A msg-accepted notification was already requested, and hasn't yet
been generated.
These return codes imply that the message was queued:
`MACH_SEND_WILL_NOTIFY'
The message was forcibly queued, and a msg-accepted notification
was requested.
`MACH_MSG_SUCCESS'
The message was queued.
Some return codes, like `MACH_SEND_TIMED_OUT', imply that the
message was almost sent, but could not be queued. In these situations,
the kernel tries to return the message contents to the caller with a
pseudo-receive operation. This prevents the loss of port rights or
memory which only exist in the message. For example, a receive right
which was moved into the message, or out-of-line memory sent with the
deallocate bit.
The pseudo-receive operation is very similar to a normal receive
operation. The pseudo-receive handles the port rights in the message
header as if they were in the message body. They are not reversed.
After the pseudo-receive, the message is ready to be resent. If the
message is not resent, note that out-of-line memory regions may have
moved and some port rights may have changed names.
The pseudo-receive operation may encounter resource shortages. This
is similar to a `MACH_RCV_BODY_ERROR' return code from a receive
operation. When this happens, the normal send return codes are
augmented with the `MACH_MSG_IPC_SPACE', `MACH_MSG_VM_SPACE',
`MACH_MSG_IPC_KERNEL', and `MACH_MSG_VM_KERNEL' bits to indicate the
nature of the resource shortage.
The queueing of a message carrying receive rights may create a
circular loop of receive rights and messages, which can never be
received. For example, a message carrying a receive right can be sent
to that receive right. This situation is not an error, but the kernel
will garbage-collect such loops, destroying the messages and ports
involved.
---------- Footnotes ----------
(1) If MACH_SEND_TIMEOUT is used without MACH_SEND_INTERRUPT, then
the timeout duration might not be accurate. When the call is
interrupted and automatically retried, the original timeout is used.
If interrupts occur frequently enough, the timeout interval might never
expire.
File: mach.info, Node: Message Receive, Next: Atomicity, Prev: Message Send, Up: Messaging Interface
4.2.6 Message Receive
---------------------
The receive operation dequeues a message from a port. The receiving
task acquires the port rights and out-of-line memory regions carried in
the message.
The `rcv_name' argument specifies a port or port set from which to
receive. If a port is specified, the caller must possess the receive
right for the port and the port must not be a member of a port set. If
no message is present, then the call blocks, subject to the
`MACH_RCV_TIMEOUT' option.
If a port set is specified, the call will receive a message sent to
any of the member ports. It is permissible for the port set to have no
member ports, and ports may be added and removed while a receive from
the port set is in progress. The received message can come from any of
the member ports which have messages, with the proviso that a member
port with messages will not be indefinitely starved. The
`msgh_local_port' field in the received message header specifies from
which port in the port set the message came.
The `rcv_size' argument specifies the size of the caller's message
buffer. The `mach_msg' call will not receive a message larger than
`rcv_size'. Messages that are too large are destroyed, unless the
`MACH_RCV_LARGE' option is used.
The destination and reply ports are reversed in a received message
header. The `msgh_local_port' field names the destination port, from
which the message was received, and the `msgh_remote_port' field names
the reply port right. The bits in `msgh_bits' are also reversed. The
`MACH_MSGH_BITS_LOCAL' bits have the value `MACH_MSG_TYPE_PORT_SEND' if
the message was sent to a send right, and the value
`MACH_MSG_TYPE_PORT_SEND_ONCE' if was sent to a send-once right. The
`MACH_MSGH_BITS_REMOTE' bits describe the reply port right.
A received message can contain port rights and out-of-line memory.
The `msgh_local_port' field does not receive a port right; the act of
receiving the message destroys the send or send-once right for the
destination port. The msgh_remote_port field does name a received port
right, the reply port right, and the message body can carry port rights
and memory if `MACH_MSGH_BITS_COMPLEX' is present in msgh_bits.
Received port rights and memory should be consumed or deallocated in
some fashion.
In almost all cases, `msgh_local_port' will specify the name of a
receive right, either `rcv_name' or if `rcv_name' is a port set, a
member of `rcv_name'. If other threads are concurrently manipulating
the receive right, the situation is more complicated. If the receive
right is renamed during the call, then `msgh_local_port' specifies the
right's new name. If the caller loses the receive right after the
message was dequeued from it, then `mach_msg' will proceed instead of
returning `MACH_RCV_PORT_DIED'. If the receive right was destroyed,
then `msgh_local_port' specifies `MACH_PORT_DEAD'. If the receive
right still exists, but isn't held by the caller, then
`msgh_local_port' specifies `MACH_PORT_NULL'.
Received messages are stamped with a sequence number, taken from the
port from which the message was received. (Messages received from a
port set are stamped with a sequence number from the appropriate member
port.) Newly created ports start with a zero sequence number, and the
sequence number is reset to zero whenever the port's receive right moves
between tasks. When a message is dequeued from the port, it is stamped
with the port's sequence number and the port's sequence number is then
incremented. The dequeue and increment operations are atomic, so that
multiple threads receiving messages from a port can use the
`msgh_seqno' field to reconstruct the original order of the messages.
These options modify `MACH_RCV_MSG'. If `MACH_RCV_MSG' is not also
specified, they are ignored.
`MACH_RCV_TIMEOUT'
The timeout argument should specify a maximum time (in
milliseconds) for the call to block before giving up.(1) If no
message arrives before the timeout interval elapses, then the call
returns `MACH_RCV_TIMED_OUT'. A zero timeout is legitimate.
`MACH_RCV_NOTIFY'
The notify argument should specify a receive right for a notify
port. If receiving the reply port creates a new port right in the
caller, then the notify port is used to request a dead-name
notification for the new port right.
`MACH_RCV_INTERRUPT'
If specified, the `mach_msg' call will return
`MACH_RCV_INTERRUPTED' if a software interrupt aborts the call.
Otherwise, the receive operation will be retried.
`MACH_RCV_LARGE'
If the message is larger than `rcv_size', then the message remains
queued instead of being destroyed. The call returns
`MACH_RCV_TOO_LARGE' and the actual size of the message is returned
in the `msgh_size' field of the message header.
The receive operation can generate the following return codes. These
return codes imply that the call did not dequeue a message:
`MACH_RCV_INVALID_NAME'
The specified `rcv_name' was invalid.
`MACH_RCV_IN_SET'
The specified port was a member of a port set.
`MACH_RCV_TIMED_OUT'
The timeout interval expired.
`MACH_RCV_INTERRUPTED'
A software interrupt occurred.
`MACH_RCV_PORT_DIED'
The caller lost the rights specified by `rcv_name'.
`MACH_RCV_PORT_CHANGED'
`rcv_name' specified a receive right which was moved into a port
set during the call.
`MACH_RCV_TOO_LARGE'
When using `MACH_RCV_LARGE', and the message was larger than
`rcv_size'. The message is left queued, and its actual size is
returned in the `msgh_size' field of the message buffer.
These return codes imply that a message was dequeued and destroyed:
`MACH_RCV_HEADER_ERROR'
A resource shortage prevented the reception of the port rights in
the message header.
`MACH_RCV_INVALID_NOTIFY'
When using `MACH_RCV_NOTIFY', the notify argument did not denote a
valid receive right.
`MACH_RCV_TOO_LARGE'
When not using `MACH_RCV_LARGE', a message larger than `rcv_size'
was dequeued and destroyed.
In these situations, when a message is dequeued and then destroyed,
the reply port and all port rights and memory in the message body are
destroyed. However, the caller receives the message's header, with all
fields correct, including the destination port but excepting the reply
port, which is `MACH_PORT_NULL'.
These return codes imply that a message was received:
`MACH_RCV_BODY_ERROR'
A resource shortage prevented the reception of a port right or
out-of-line memory region in the message body. The message header,
including the reply port, is correct. The kernel attempts to
transfer all port rights and memory regions in the body, and only
destroys those that can't be transferred.
`MACH_RCV_INVALID_DATA'
The specified message buffer was not writable. The calling task
did successfully receive the port rights and out-of-line memory
regions in the message.
`MACH_MSG_SUCCESS'
A message was received.
Resource shortages can occur after a message is dequeued, while
transferring port rights and out-of-line memory regions to the receiving
task. The `mach_msg' call returns `MACH_RCV_HEADER_ERROR' or
`MACH_RCV_BODY_ERROR' in this situation. These return codes always
carry extra bits (bitwise-ored) that indicate the nature of the resource
shortage:
`MACH_MSG_IPC_SPACE'
There was no room in the task's IPC name space for another port
name.
`MACH_MSG_VM_SPACE'
There was no room in the task's VM address space for an out-of-line
memory region.
`MACH_MSG_IPC_KERNEL'
A kernel resource shortage prevented the reception of a port right.
`MACH_MSG_VM_KERNEL'
A kernel resource shortage prevented the reception of an
out-of-line memory region.
If a resource shortage prevents the reception of a port right, the
port right is destroyed and the caller sees the name `MACH_PORT_NULL'.
If a resource shortage prevents the reception of an out-of-line memory
region, the region is destroyed and the caller receives a zero address.
In addition, the `msgt_size' (`msgtl_size') field in the data's type
descriptor is changed to zero. If a resource shortage prevents the
reception of out-of-line memory carrying port rights, then the port
rights are always destroyed if the memory region can not be received.
A task never receives port rights or memory regions that it isn't told
about.
---------- Footnotes ----------
(1) If MACH_RCV_TIMEOUT is used without MACH_RCV_INTERRUPT, then the
timeout duration might not be accurate. When the call is interrupted
and automatically retried, the original timeout is used. If interrupts
occur frequently enough, the timeout interval might never expire.
File: mach.info, Node: Atomicity, Prev: Message Receive, Up: Messaging Interface
4.2.7 Atomicity
---------------
The `mach_msg' call handles port rights in a message header atomically.
Port rights and out-of-line memory in a message body do not enjoy this
atomicity guarantee. The message body may be processed front-to-back,
back-to-front, first out-of-line memory then port rights, in some
random order, or even atomically.
For example, consider sending a message with the destination port
specified as `MACH_MSG_TYPE_MOVE_SEND' and the reply port specified as
`MACH_MSG_TYPE_COPY_SEND'. The same send right, with one
user-reference, is supplied for both the `msgh_remote_port' and
`msgh_local_port' fields. Because `mach_msg' processes the message
header atomically, this succeeds. If `msgh_remote_port' were processed
before `msgh_local_port', then `mach_msg' would return
`MACH_SEND_INVALID_REPLY' in this situation.
On the other hand, suppose the destination and reply port are both
specified as `MACH_MSG_TYPE_MOVE_SEND', and again the same send right
with one user-reference is supplied for both. Now the send operation
fails, but because it processes the header atomically, mach_msg can
return either `MACH_SEND_INVALID_DEST' or `MACH_SEND_INVALID_REPLY'.
For example, consider receiving a message at the same time another
thread is deallocating the destination receive right. Suppose the reply
port field carries a send right for the destination port. If the
deallocation happens before the dequeuing, then the receiver gets
`MACH_RCV_PORT_DIED'. If the deallocation happens after the receive,
then the `msgh_local_port' and the `msgh_remote_port' fields both
specify the same right, which becomes a dead name when the receive
right is deallocated. If the deallocation happens between the dequeue
and the receive, then the `msgh_local_port' and `msgh_remote_port'
fields both specify `MACH_PORT_DEAD'. Because the header is processed
atomically, it is not possible for just one of the two fields to hold
`MACH_PORT_DEAD'.
The `MACH_RCV_NOTIFY' option provides a more likely example.
Suppose a message carrying a send-once right reply port is received with
`MACH_RCV_NOTIFY' at the same time the reply port is destroyed. If the
reply port is destroyed first, then `msgh_remote_port' specifies
`MACH_PORT_DEAD' and the kernel does not generate a dead-name
notification. If the reply port is destroyed after it is received,
then `msgh_remote_port' specifies a dead name for which the kernel
generates a dead-name notification. It is not possible to receive the
reply port right and have it turn into a dead name before the dead-name
notification is requested; as part of the message header the reply port
is received atomically.
File: mach.info, Node: Port Manipulation Interface, Prev: Messaging Interface, Up: Inter Process Communication
4.3 Port Manipulation Interface
===============================
This section describes the interface to create, destroy and manipulate
ports, port rights and port sets.
-- Data type: ipc_space_t
This is a `task_t' (and as such a `mach_port_t'), which holds a
port name associated with a port that represents an IPC space in
the kernel. An IPC space is used by the kernel to manage the port
names and rights available to a task. The IPC space doesn't get a
port name of its own. Instead the port name of the task
containing the IPC space is used to name the IPC space of the task
(as is indicated by the fact that the type of `ipc_space_t' is
actually `task_t').
The IPC spaces of tasks are the only ones accessible outside of
the kernel.
* Menu:
* Port Creation:: How to create new ports and port sets.
* Port Destruction:: How to destroy ports and port sets.
* Port Names:: How to query and manipulate port names.
* Port Rights:: How to work with port rights.
* Ports and other Tasks:: How to move rights between tasks.
* Receive Rights:: How to work with receive rights.
* Port Sets:: How to work with port sets.
* Request Notifications:: How to request notifications for events.
File: mach.info, Node: Port Creation, Next: Port Destruction, Up: Port Manipulation Interface
4.3.1 Port Creation
-------------------
-- Function: kern_return_t mach_port_allocate (ipc_space_t TASK,
mach_port_right_t RIGHT, mach_port_t *NAME)
The `mach_port_allocate' function creates a new right in the
specified task. The new right's name is returned in NAME, which
may be any name that wasn't in use.
The RIGHT argument takes the following values:
`MACH_PORT_RIGHT_RECEIVE'
`mach_port_allocate' creates a port. The new port is not a
member of any port set. It doesn't have any extant send or
send-once rights. Its make-send count is zero, its sequence
number is zero, its queue limit is
`MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages.
NAME denotes the receive right for the new port.
TASK does not hold send rights for the new port, only the
receive right. `mach_port_insert_right' and
`mach_port_extract_right' can be used to convert the receive
right into a combined send/receive right.
`MACH_PORT_RIGHT_PORT_SET'
`mach_port_allocate' creates a port set. The new port set
has no members.
`MACH_PORT_RIGHT_DEAD_NAME'
`mach_port_allocate' creates a dead name. The new dead name
has one user reference.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
RIGHT was invalid, `KERN_NO_SPACE' if there was no room in TASK's
IPC name space for another right and `KERN_RESOURCE_SHORTAGE' if
the kernel ran out of memory.
The `mach_port_allocate' call is actually an RPC to TASK, normally
a send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: mach_port_t mach_reply_port ()
The `mach_reply_port' system call creates a reply port in the
calling task.
`mach_reply_port' creates a port, giving the calling task the
receive right for the port. The call returns the name of the new
receive right.
This is very much like creating a receive right with the
`mach_port_allocate' call, with two differences. First,
`mach_reply_port' is a system call and not an RPC (which requires a
reply port). Second, the port created by `mach_reply_port' may be
optimized for use as a reply port.
The function returns `MACH_PORT_NULL' if a resource shortage
prevented the creation of the receive right.
-- Function: kern_return_t mach_port_allocate_name (ipc_space_t TASK,
mach_port_right_t RIGHT, mach_port_t NAME)
The function `mach_port_allocate_name' creates a new right in the
specified task, with a specified name for the new right. NAME
must not already be in use for some right, and it can't be the
reserved values `MACH_PORT_NULL' and `MACH_PORT_DEAD'.
The RIGHT argument takes the following values:
`MACH_PORT_RIGHT_RECEIVE'
`mach_port_allocate_name' creates a port. The new port is
not a member of any port set. It doesn't have any extant
send or send-once rights. Its make-send count is zero, its
sequence number is zero, its queue limit is
`MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages.
NAME denotes the receive right for the new port.
TASK does not hold send rights for the new port, only the
receive right. `mach_port_insert_right' and
`mach_port_extract_right' can be used to convert the receive
right into a combined send/receive right.
`MACH_PORT_RIGHT_PORT_SET'
`mach_port_allocate_name' creates a port set. The new port
set has no members.
`MACH_PORT_RIGHT_DEAD_NAME'
`mach_port_allocate_name' creates a new dead name. The new
dead name has one user reference.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
RIGHT was invalid or NAME was `MACH_PORT_NULL' or
`MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME was already in use
for a port right and `KERN_RESOURCE_SHORTAGE' if the kernel ran
out of memory.
The `mach_port_allocate_name' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Port Destruction, Next: Port Names, Prev: Port Creation, Up: Port Manipulation Interface
4.3.2 Port Destruction
----------------------
-- Function: kern_return_t mach_port_deallocate (ipc_space_t TASK,
mach_port_t NAME)
The function `mach_port_deallocate' releases a user reference for a
right in TASK's IPC name space. It allows a task to release a
user reference for a send or send-once right without failing if
the port has died and the right is now actually a dead name.
If NAME denotes a dead name, send right, or send-once right, then
the right loses one user reference. If it only had one user
reference, then the right is destroyed.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
denoted an invalid right.
The `mach_port_deallocate' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: kern_return_t mach_port_destroy (ipc_space_t TASK,
mach_port_t NAME)
The function `mach_port_destroy' deallocates all rights denoted by
a name. The name becomes immediately available for reuse.
For most purposes, `mach_port_mod_refs' and `mach_port_deallocate'
are preferable.
If NAME denotes a port set, then all members of the port set are
implicitly removed from the port set.
If NAME denotes a receive right that is a member of a port set,
the receive right is implicitly removed from the port set. If
there is a port-destroyed request registered for the port, then
the receive right is not actually destroyed, but instead is sent
in a port-destroyed notification to the backup port. If there is
no registered port-destroyed request, remaining messages queued to
the port are destroyed and extant send and send-once rights turn
into dead names. If those send and send-once rights have
dead-name requests registered, then dead-name notifications are
generated for them.
If NAME denotes a send-once right, then the send-once right is
used to produce a send-once notification for the port.
If NAME denotes a send-once, send, and/or receive right, and it
has a dead-name request registered, then the registered send-once
right is used to produce a port-deleted notification for the name.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right.
The `mach_port_destroy' call is actually an RPC to TASK, normally
a send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Port Names, Next: Port Rights, Prev: Port Destruction, Up: Port Manipulation Interface
4.3.3 Port Names
----------------
-- Function: kern_return_t mach_port_names (ipc_space_t TASK,
mach_port_array_t *NAMES, mach_msg_type_number_t *NCOUNT,
mach_port_type_array_t *TYPES, mach_msg_type_number_t *TCOUNT)
The function `mach_port_names' returns information about TASK's
port name space. For each name, it also returns what type of
rights TASK holds. (The same information returned by
`mach_port_type'.) NAMES and TYPES are arrays that are
automatically allocated when the reply message is received. The
user should `vm_deallocate' them when the data is no longer needed.
`mach_port_names' will return in NAMES the names of the ports,
port sets, and dead names in the task's port name space, in no
particular order and in NCOUNT the number of names returned. It
will return in TYPES the type of each corresponding name, which
indicates what kind of rights the task holds with that name.
TCOUNT should be the same as NCOUNT.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_RESOURCE_SHORTAGE'
if the kernel ran out of memory.
The `mach_port_names' call is actually an RPC to TASK, normally a
send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: kern_return_t mach_port_type (ipc_space_t TASK,
mach_port_t NAME, mach_port_type_t *PTYPE)
The function `mach_port_type' returns information about TASK's
rights for a specific name in its port name space. The returned
PTYPE is a bitmask indicating what rights TASK holds for the port,
port set or dead name. The bitmask is composed of the following
bits:
`MACH_PORT_TYPE_SEND'
The name denotes a send right.
`MACH_PORT_TYPE_RECEIVE'
The name denotes a receive right.
`MACH_PORT_TYPE_SEND_ONCE'
The name denotes a send-once right.
`MACH_PORT_TYPE_PORT_SET'
The name denotes a port set.
`MACH_PORT_TYPE_DEAD_NAME'
The name is a dead name.
`MACH_PORT_TYPE_DNREQUEST'
A dead-name request has been registered for the right.
`MACH_PORT_TYPE_MAREQUEST'
A msg-accepted request for the right is pending.
`MACH_PORT_TYPE_COMPAT'
The port right was created in the compatibility mode.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid and `KERN_INVALID_NAME' if
NAME did not denote a right.
The `mach_port_type' call is actually an RPC to TASK, normally a
send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: kern_return_t mach_port_rename (ipc_space_t TASK,
mach_port_t OLD_NAME, mach_port_t NEW_NAME)
The function `mach_port_rename' changes the name by which a port,
port set, or dead name is known to TASK. OLD_NAME is the original
name and NEW_NAME the new name for the port right. NEW_NAME must
not already be in use, and it can't be the distinguished values
`MACH_PORT_NULL' and `MACH_PORT_DEAD'.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
OLD_NAME did not denote a right, `KERN_INVALID_VALUE' if NEW_NAME
was `MACH_PORT_NULL' or `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if
`new_name' already denoted a right and `KERN_RESOURCE_SHORTAGE' if
the kernel ran out of memory.
The `mach_port_rename' call is actually an RPC to TASK, normally a
send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Port Rights, Next: Ports and other Tasks, Prev: Port Names, Up: Port Manipulation Interface
4.3.4 Port Rights
-----------------
-- Function: kern_return_t mach_port_get_refs (ipc_space_t TASK,
mach_port_t NAME, mach_port_right_t RIGHT,
mach_port_urefs_t *REFS)
The function `mach_port_get_refs' returns the number of user
references a task has for a right.
The RIGHT argument takes the following values:
* `MACH_PORT_RIGHT_SEND'
* `MACH_PORT_RIGHT_RECEIVE'
* `MACH_PORT_RIGHT_SEND_ONCE'
* `MACH_PORT_RIGHT_PORT_SET'
* `MACH_PORT_RIGHT_DEAD_NAME'
If NAME denotes a right, but not the type of right specified, then
zero is returned. Otherwise a positive number of user references
is returned. Note that a name may simultaneously denote send and
receive rights.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
RIGHT was invalid and `KERN_INVALID_NAME' if NAME did not denote a
right.
The `mach_port_get_refs' call is actually an RPC to TASK, normally
a send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: kern_return_t mach_port_mod_refs (ipc_space_t TASK,
mach_port_t NAME, mach_port_right_t RIGHT,
mach_port_delta_t DELTA)
The function `mach_port_mod_refs' requests that the number of user
references a task has for a right be changed. This results in the
right being destroyed, if the number of user references is changed
to zero. The task holding the right is TASK, NAME should denote
the specified right. RIGHT denotes the type of right being
modified. DELTA is the signed change to the number of user
references.
The RIGHT argument takes the following values:
* `MACH_PORT_RIGHT_SEND'
* `MACH_PORT_RIGHT_RECEIVE'
* `MACH_PORT_RIGHT_SEND_ONCE'
* `MACH_PORT_RIGHT_PORT_SET'
* `MACH_PORT_RIGHT_DEAD_NAME'
The number of user references for the right is changed by the
amount DELTA, subject to the following restrictions: port sets,
receive rights, and send-once rights may only have one user
reference. The resulting number of user references can't be
negative. If the resulting number of user references is zero, the
effect is to deallocate the right. For dead names and send
rights, there is an implementation-defined maximum number of user
references.
If the call destroys the right, then the effect is as described for
`mach_port_destroy', with the exception that `mach_port_destroy'
simultaneously destroys all the rights denoted by a name, while
`mach_port_mod_refs' can only destroy one right. The name will be
available for reuse if it only denoted the one right.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
RIGHT was invalid or the user-reference count would become
negative, `KERN_INVALID_NAME' if NAME did not denote a right,
`KERN_INVALID_RIGHT' if NAME denoted a right, but not the
specified right and `KERN_UREFS_OVERFLOW' if the user-reference
count would overflow.
The `mach_port_mod_refs' call is actually an RPC to TASK, normally
a send right for a task port, but potentially any send right. In
addition to the normal diagnostic return codes from the call's
server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Ports and other Tasks, Next: Receive Rights, Prev: Port Rights, Up: Port Manipulation Interface
4.3.5 Ports and other Tasks
---------------------------
-- Function: kern_return_t mach_port_insert_right (ipc_space_t TASK,
mach_port_t NAME, mach_port_t RIGHT,
mach_msg_type_name_t RIGHT_TYPE)
The function MACH_PORT_INSERT_RIGHT inserts into TASK the caller's
right for a port, using a specified name for the right in the
target task.
The specified NAME can't be one of the reserved values
`MACH_PORT_NULL' or `MACH_PORT_DEAD'. The RIGHT can't be
`MACH_PORT_NULL' or `MACH_PORT_DEAD'.
The argument RIGHT_TYPE specifies a right to be inserted and how
that right should be extracted from the caller. It should be a
value appropriate for MSGT_NAME; see `mach_msg'. If RIGHT_TYPE is
`MACH_MSG_TYPE_MAKE_SEND', `MACH_MSG_TYPE_MOVE_SEND', or
`MACH_MSG_TYPE_COPY_SEND', then a send right is inserted. If the
target already holds send or receive rights for the port, then
NAME should denote those rights in the target. Otherwise, NAME
should be unused in the target. If the target already has send
rights, then those send rights gain an additional user reference.
Otherwise, the target gains a send right, with a user reference
count of one.
If RIGHT_TYPE is `MACH_MSG_TYPE_MAKE_SEND_ONCE' or
`MACH_MSG_TYPE_MOVE_SEND_ONCE', then a send-once right is inserted.
The name should be unused in the target. The target gains a
send-once right.
If RIGHT_TYPE is `MACH_MSG_TYPE_MOVE_RECEIVE', then a receive
right is inserted. If the target already holds send rights for the
port, then name should denote those rights in the target.
Otherwise, name should be unused in the target. The receive right
is moved into the target task.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
RIGHT was not a port right or NAME was `MACH_PORT_NULL' or
`MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME already denoted a
right, `KERN_INVALID_CAPABILITY' if RIGHT was `MACH_PORT_NULL' or
`MACH_PORT_DEAD' `KERN_RIGHT_EXISTS' if TASK already had rights
for the port, with a different name, `KERN_UREFS_OVERFLOW' if the
user-reference count would overflow and `KERN_RESOURCE_SHORTAGE'
if the kernel ran out of memory.
The `mach_port_insert_right' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
-- Function: kern_return_t mach_port_extract_right (ipc_space_t TASK,
mach_port_t NAME, mach_msg_type_name_t DESIRED_TYPE,
mach_port_t *RIGHT, mach_msg_type_name_t *ACQUIRED_TYPE)
The function MACH_PORT_EXTRACT_RIGHT extracts a port right from
the target TASK and returns it to the caller as if the task sent
the right voluntarily, using DESIRED_TYPE as the value of
MSGT_NAME. *Note Mach Message Call::.
The returned value of ACQUIRED_TYPE will be
`MACH_MSG_TYPE_PORT_SEND' if a send right is extracted,
`MACH_MSG_TYPE_PORT_RECEIVE' if a receive right is extracted, and
`MACH_MSG_TYPE_PORT_SEND_ONCE' if a send-once right is extracted.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
a right, but an invalid one, `KERN_INVALID_VALUE' if DESIRED_TYPE
was invalid.
The `mach_port_extract_right' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Receive Rights, Next: Port Sets, Prev: Ports and other Tasks, Up: Port Manipulation Interface
4.3.6 Receive Rights
--------------------
-- Data type: mach_port_seqno_t
The `mach_port_seqno_t' data type is an `unsigned int' which
contains the sequence number of a port.
-- Data type: mach_port_mscount_t
The `mach_port_mscount_t' data type is an `unsigned int' which
contains the make-send count for a port.
-- Data type: mach_port_msgcount_t
The `mach_port_msgcount_t' data type is an `unsigned int' which
contains a number of messages.
-- Data type: mach_port_rights_t
The `mach_port_rights_t' data type is an `unsigned int' which
contains a number of rights for a port.
-- Data type: mach_port_status_t
This structure contains some status information about a port,
which can be queried with `mach_port_get_receive_status'. It has
the following members:
`mach_port_t mps_pset'
The containing port set.
`mach_port_seqno_t mps_seqno'
The sequence number.
`mach_port_mscount_t mps_mscount'
The make-send count.
`mach_port_msgcount_t mps_qlimit'
The maximum number of messages in the queue.
`mach_port_msgcount_t mps_msgcount'
The current number of messages in the queue.
`mach_port_rights_t mps_sorights'
The number of send-once rights that exist.
`boolean_t mps_srights'
`TRUE' if send rights exist.
`boolean_t mps_pdrequest'
`TRUE' if port-deleted notification is requested.
`boolean_t mps_nsrequest'
`TRUE' if no-senders notification is requested.
-- Function: kern_return_t mach_port_get_receive_status
(ipc_space_t TASK, mach_port_t NAME,
mach_port_status_t *STATUS)
The function `mach_port_get_receive_status' returns the current
status of the specified receive right.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
denoted a right, but not a receive right.
The `mach_port_get_receive_status' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
-- Function: kern_return_t mach_port_set_mscount (ipc_space_t TASK,
mach_port_t NAME, mach_port_mscount_t MSCOUNT)
The function `mach_port_set_mscount' changes the make-send count of
TASK's receive right named NAME to MSCOUNT. All values for
MSCOUNT are valid.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
denoted a right, but not a receive right.
The `mach_port_set_mscount' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
-- Function: kern_return_t mach_port_set_qlimit (ipc_space_t TASK,
mach_port_t NAME, mach_port_msgcount_t QLIMIT)
The function `mach_port_set_qlimit' changes the queue limit TASK's
receive right named NAME to QLIMIT. Valid values for QLIMIT are
between zero and `MACH_PORT_QLIMIT_MAX', inclusive.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
a right, but not a receive right and `KERN_INVALID_VALUE' if
QLIMIT was invalid.
The `mach_port_set_qlimit' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
-- Function: kern_return_t mach_port_set_seqno (ipc_space_t TASK,
mach_port_t NAME, mach_port_seqno_t SEQNO)
The function `mach_port_set_seqno' changes the sequence number
TASK's receive right named NAME to SEQNO. All sequence number
values are valid. The next message received from the port will be
stamped with the specified sequence number.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
denoted a right, but not a receive right.
The `mach_port_set_seqno' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
File: mach.info, Node: Port Sets, Next: Request Notifications, Prev: Receive Rights, Up: Port Manipulation Interface
4.3.7 Port Sets
---------------
-- Function: kern_return_t mach_port_get_set_status (ipc_space_t TASK,
mach_port_t NAME, mach_port_array_t *MEMBERS,
mach_msg_type_number_t *COUNT)
The function `mach_port_get_set_status' returns the members of a
port set. MEMBERS is an array that is automatically allocated
when the reply message is received. The user should
`vm_deallocate' it when the data is no longer needed.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
a right, but not a receive right and `KERN_RESOURCE_SHORTAGE' if
the kernel ran out of memory.
The `mach_port_get_set_status' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return `mach_msg'
return codes.
-- Function: kern_return_t mach_port_move_member (ipc_space_t TASK,
mach_port_t MEMBER, mach_port_t AFTER)
The function MACH_PORT_MOVE_MEMBER moves the receive right MEMBER
into the port set AFTER. If the receive right is already a member
of another port set, it is removed from that set first (the whole
operation is atomic). If the port set is `MACH_PORT_NULL', then
the receive right is not put into a port set, but removed from its
current port set.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
MEMBER or AFTER did not denote a right, `KERN_INVALID_RIGHT' if
MEMBER denoted a right, but not a receive right or AFTER denoted a
right, but not a port set, and `KERN_NOT_IN_SET' if AFTER was
`MACH_PORT_NULL', but `member' wasn't currently in a port set.
The `mach_port_move_member' call is actually an RPC to TASK,
normally a send right for a task port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
File: mach.info, Node: Request Notifications, Prev: Port Sets, Up: Port Manipulation Interface
4.3.8 Request Notifications
---------------------------
-- Function: kern_return_t mach_port_request_notification
(ipc_space_t TASK, mach_port_t NAME, mach_msg_id_t VARIANT,
mach_port_mscount_t SYNC, mach_port_t NOTIFY,
mach_msg_type_name_t NOTIFY_TYPE, mach_port_t *PREVIOUS)
The function `mach_port_request_notification' registers a request
for a notification and supplies the send-once right NOTIFY to
which the notification will be sent. The NOTIFY_TYPE denotes the
IPC type for the send-once right, which can be
`MACH_MSG_TYPE_MAKE_SEND_ONCE' or `MACH_MSG_TYPE_MOVE_SEND_ONCE'.
It is an atomic swap, returning the previously registered
send-once right (or `MACH_PORT_NULL' for none) in PREVIOUS. A
previous notification request may be cancelled by providing
`MACH_PORT_NULL' for NOTIFY.
The VARIANT argument takes the following values:
`MACH_NOTIFY_PORT_DESTROYED'
SYNC must be zero. The NAME must specify a receive right,
and the call requests a port-destroyed notification for the
receive right. If the receive right were to have been
destroyed, say by `mach_port_destroy', then instead the
receive right will be sent in a port-destroyed notification
to the registered send-once right.
`MACH_NOTIFY_DEAD_NAME'
The call requests a dead-name notification. NAME specifies
send, receive, or send-once rights for a port. If the port
is destroyed (and the right remains, becoming a dead name),
then a dead-name notification which carries the name of the
right will be sent to the registered send-once right. If
NOTIFY is not null and sync is non-zero, the name may specify
a dead name, and a dead-name notification is immediately
generated.
Whenever a dead-name notification is generated, the user
reference count of the dead name is incremented. For
example, a send right with two user refs has a registered
dead-name request. If the port is destroyed, the send right
turns into a dead name with three user refs (instead of two),
and a dead-name notification is generated.
If the name is made available for reuse, perhaps because of
`mach_port_destroy' or `mach_port_mod_refs', or the name
denotes a send-once right which has a message sent to it,
then the registered send-once right is used to generate a
port-deleted notification.
`MACH_NOTIFY_NO_SENDERS'
The call requests a no-senders notification. NAME must
specify a receive right. If NOTIFY is not null, and the
receive right's make-send count is greater than or equal to
the sync value, and it has no extant send rights, than an
immediate no-senders notification is generated. Otherwise
the notification is generated when the receive right next
loses its last extant send right. In either case, any
previously registered send-once right is returned.
The no-senders notification carries the value the port's
make-send count had when it was generated. The make-send
count is incremented whenever `MACH_MSG_TYPE_MAKE_SEND' is
used to create a new send right from the receive right. The
make-send count is reset to zero when the receive right is
carried in a message.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
VARIANT was invalid, `KERN_INVALID_NAME' if NAME did not denote a
right, `KERN_INVALID_RIGHT' if NAME denoted an invalid right and
`KERN_INVALID_CAPABILITY' if NOTIFY was invalid.
When using `MACH_NOTIFY_PORT_DESTROYED', the function returns
`KERN_INVALID_VALUE' if SYNC wasn't zero.
When using `MACH_NOTIFY_DEAD_NAME', the function returns
`KERN_RESOURCE_SHORTAGE' if the kernel ran out of memory,
`KERN_INVALID_ARGUMENT' if NAME denotes a dead name, but SYNC is
zero or NOTIFY is `MACH_PORT_NULL', and `KERN_UREFS_OVERFLOW' if
NAME denotes a dead name, but generating an immediate dead-name
notification would overflow the name's user-reference count.
The `mach_port_request_notification' call is actually an RPC to
TASK, normally a send right for a task port, but potentially any
send right. In addition to the normal diagnostic return codes
from the call's server (normally the kernel), the call may return
`mach_msg' return codes.
File: mach.info, Node: Virtual Memory Interface, Next: External Memory Management, Prev: Inter Process Communication, Up: Top
5 Virtual Memory Interface
**************************
-- Data type: vm_task_t
This is a `task_t' (and as such a `mach_port_t'), which holds a
port name associated with a port that represents a virtual memory
map in the kernel. An virtual memory map is used by the kernel to
manage the address space of a task. The virtual memory map
doesn't get a port name of its own. Instead the port name of the
task provided with the virtual memory is used to name the virtual
memory map of the task (as is indicated by the fact that the type
of `vm_task_t' is actually `task_t').
The virtual memory maps of tasks are the only ones accessible
outside of the kernel.
* Menu:
* Memory Allocation:: Allocation of new virtual memory.
* Memory Deallocation:: Freeing unused virtual memory.
* Data Transfer:: Reading, writing and copying memory.
* Memory Attributes:: Tweaking memory regions.
* Mapping Memory Objects:: How to map memory objects.
* Memory Statistics:: How to get statistics about memory usage.
File: mach.info, Node: Memory Allocation, Next: Memory Deallocation, Up: Virtual Memory Interface
5.1 Memory Allocation
=====================
-- Function: kern_return_t vm_allocate (vm_task_t TARGET_TASK,
vm_address_t *ADDRESS, vm_size_t SIZE, boolean_t ANYWHERE)
The function `vm_allocate' allocates a region of virtual memory,
placing it in the specified TASK's address space.
The starting address is ADDRESS. If the ANYWHERE option is false,
an attempt is made to allocate virtual memory starting at this
virtual address. If this address is not at the beginning of a
virtual page, it will be rounded down to one. If there is not
enough space at this address, no memory will be allocated. If the
ANYWHERE option is true, the input value of this address will be
ignored, and the space will be allocated wherever it is available.
In either case, the address at which memory was actually
allocated will be returned in ADDRESS.
SIZE is the number of bytes to allocate (rounded by the system in
a machine dependent way to an integral number of virtual pages).
If ANYWHERE is true, the kernel should find and allocate any
region of the specified size, and return the address of the
resulting region in address address, rounded to a virtual page
boundary if there is sufficient space.
The physical memory is not actually allocated until the new virtual
memory is referenced. By default, the kernel rounds all addresses
down to the nearest page boundary and all memory sizes up to the
nearest page size. The global variable `vm_page_size' contains
the page size. `mach_task_self' returns the value of the current
task port which should be used as the TARGET_TASK argument in
order to allocate memory in the caller's address space. For
languages other than C, these values can be obtained by the calls
`vm_statistics' and `mach_task_self'. Initially, the pages of
allocated memory will be protected to allow all forms of access,
and will be inherited in child tasks as a copy. Subsequent calls
to `vm_protect' and `vm_inherit' may be used to change these
properties. The allocated region is always zero-filled.
The function returns `KERN_SUCCESS' if the memory was successfully
allocated, `KERN_INVALID_ADDRESS' if an invalid address was
specified and `KERN_NO_SPACE' if there was not enough space left to
satisfy the request.
File: mach.info, Node: Memory Deallocation, Next: Data Transfer, Prev: Memory Allocation, Up: Virtual Memory Interface
5.2 Memory Deallocation
=======================
-- Function: kern_return_t vm_deallocate (vm_task_t TARGET_TASK,
vm_address_t ADDRESS, vm_size_t SIZE)
`vm_deallocate' relinquishes access to a region of a TASK's
address space, causing further access to that memory to fail. This
address range will be available for reallocation. ADDRESS is the
starting address, which will be rounded down to a page boundary.
SIZE is the number of bytes to deallocate, which will be rounded
up to give a page boundary. Note, that because of the rounding to
virtual page boundaries, more than SIZE bytes may be deallocated.
Use `vm_page_size' or `vm_statistics' to find out the current
virtual page size.
This call may be used to deallocte memory that was passed to a
task in a message (via out of line data). In that case, the
rounding should cause no trouble, since the region of memory was
allocated as a set of pages.
The `vm_deallocate' call affects only the task specified by the
TARGET_TASK. Other tasks which may have access to this memory may
continue to reference it.
The function returns `KERN_SUCCESS' if the memory was successfully
deallocated and `KERN_INVALID_ADDRESS' if an invalid or
non-allocated address was specified.
File: mach.info, Node: Data Transfer, Next: Memory Attributes, Prev: Memory Deallocation, Up: Virtual Memory Interface
5.3 Data Transfer
=================
-- Function: kern_return_t vm_read (vm_task_t TARGET_TASK,
vm_address_t ADDRESS, vm_size_t SIZE, vm_offset_t *DATA,
mach_msg_type_number_t *DATA_COUNT)
The function `vm_read' allows one task's virtual memory to be read
by another task. The TARGET_TASK is the task whose memory is to
be read. ADDRESS is the first address to be read and must be on a
page boundary. SIZE is the number of bytes of data to be read and
must be an integral number of pages. DATA is the array of data
copied from the given task, and DATA_COUNT is the size of the data
array in bytes (will be an integral number of pages).
Note that the data array is returned in a newly allocated region;
the task reading the data should `vm_deallocate' this region when
it is done with the data.
The function returns `KERN_SUCCESS' if the memory was successfully
read, `KERN_INVALID_ADDRESS' if an invalid or non-allocated address
was specified or there was not SIZE bytes of data following the
address, `KERN_INVALID_ARGUMENT' if the address does not start on a
page boundary or the size is not an integral number of pages,
`KERN_PROTECTION_FAILURE' if the address region in the target task
is protected against reading and `KERN_NO_SPACE' if there was not
enough room in the callers virtual memory to allocate space for
the data to be returned.
-- Function: kern_return_t vm_write (vm_task_t TARGET_TASK,
vm_address_t ADDRESS, vm_offset_t DATA,
mach_msg_type_number_t DATA_COUNT)
The function `vm_write' allows a task to write to the vrtual memory
of TARGET_TASK. ADDRESS is the starting address in task to be
affected. DATA is an array of bytes to be written, and DATA_COUNT
the size of the DATA array.
The current implementation requires that ADDRESS, DATA and
DATA_COUNT all be page-aligned. Otherwise,
`KERN_INVALID_ARGUMENT' is returned.
The function returns `KERN_SUCCESS' if the memory was successfully
written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
address was specified or there was not DATA_COUNT bytes of
allocated memory starting at ADDRESS and `KERN_PROTECTION_FAILURE'
if the address region in the target task is protected against
writing.
-- Function: kern_return_t vm_copy (vm_task_t TARGET_TASK,
vm_address_t SOURCE_ADDRESS, vm_size_t COUNT,
vm_offset_t DEST_ADDRESS)
The function `vm_copy' causes the source memory range to be copied
to the destination address. The source and destination memory
ranges may overlap. The destination address range must already be
allocated and writable; the source range must be readable.
`vm_copy' is equivalent to `vm_read' followed by `vm_write'.
The current implementation requires that ADDRESS, DATA and
DATA_COUNT all be page-aligned. Otherwise,
`KERN_INVALID_ARGUMENT' is returned.
The function returns `KERN_SUCCESS' if the memory was successfully
written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
address was specified or there was insufficient memory allocated
at one of the addresses and `KERN_PROTECTION_FAILURE' if the
destination region was not writable or the source region was not
readable.
File: mach.info, Node: Memory Attributes, Next: Mapping Memory Objects, Prev: Data Transfer, Up: Virtual Memory Interface
5.4 Memory Attributes
=====================
-- Function: kern_return_t vm_region (vm_task_t TARGET_TASK,
vm_address_t *ADDRESS, vm_size_t *SIZE,
vm_prot_t *PROTECTION, vm_prot_t *MAX_PROTECTION,
vm_inherit_t *INHERITANCE, boolean_t *SHARED,
memory_object_name_t *OBJECT_NAME, vm_offset_t *OFFSET)
The function `vm_region' returns a description of the specified
region of TARGET_TASK's virtual address space. `vm_region' begins
at ADDRESS and looks forward through memory until it comes to an
allocated region. If address is within a region, then that region
is used. Various bits of information about the region are
returned. If ADDRESS was not within a region, then ADDRESS is set
to the start of the first region which follows the incoming value.
In this way an entire address space can be scanned.
The SIZE returned is the size of the located region in bytes.
PROTECTION is the current protection of the region, MAX_PROTECTION
is the maximum allowable protection for this region. INHERITANCE
is the inheritance attribute for this region. SHARED tells if the
region is shared or not. The port OBJECT_NAME identifies the
memory object associated with this region, and OFFSET is the
offset into the pager object that this region begins at.
The function returns `KERN_SUCCESS' if the memory region was
successfully located and the information returned and
`KERN_NO_SPACE' if there is no region at or above ADDRESS in the
specified task.
-- Function: kern_return_t vm_protect (vm_task_t TARGET_TASK,
vm_address_t ADDRESS, vm_size_t SIZE, boolean_t SET_MAXIMUM,
vm_prot_t NEW_PROTECTION)
The function `vm_protect' sets the virtual memory access privileges
for a range of allocated addresses in TARGET_TASK's virtual
address space. The protection argument describes a combination of
read, write, and execute accesses that should be _permitted_.
ADDRESS is the starting address, which will be rounded down to a
page boundary. SIZE is the size in bytes of the region for which
protection is to change, and will be rounded up to give a page
boundary. If SET_MAXIMUM is set, make the protection change apply
to the maximum protection associated with this address range;
otherwise, the current protection on this range is changed. If
the maximum protection is reduced below the current protection,
both will be changed to reflect the new maximum. NEW_PROTECTION
is the new protection value for this region; a set of:
`VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE'.
The enforcement of virtual memory protection is machine-dependent.
Nominally read access requires `VM_PROT_READ' permission, write
access requires `VM_PROT_WRITE' permission, and execute access
requires `VM_PROT_EXECUTE' permission. However, some combinations
of access rights may not be supported. In particular, the kernel
interface allows write access to require `VM_PROT_READ' and
`VM_PROT_WRITE' permission and execute access to require
`VM_PROT_READ' permission.
The function returns `KERN_SUCCESS' if the memory was successfully
protected, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
address was specified and `KERN_PROTECTION_FAILURE' if an attempt
was made to increase the current or maximum protection beyond the
existing maximum protection value.
-- Function: kern_return_t vm_inherit (vm_task_t TARGET_TASK,
vm_address_t ADDRESS, vm_size_t SIZE,
vm_inherit_t NEW_INHERITANCE)
The function `vm_inherit' specifies how a region of TARGET_TASK's
address space is to be passed to child tasks at the time of task
creation. Inheritance is an attribute of virtual pages, so
ADDRESS to start from will be rounded down to a page boundary and
SIZE, the size in bytes of the region for wihch inheritance is to
change, will be rounded up to give a page boundary. How this
memory is to be inherited in child tasks is specified by
NEW_INHERITANCE. Inheritance is specified by using one of these
following three values:
`VM_INHERIT_SHARE'
Child tasks will share this memory with this task.
`VM_INHERIT_COPY'
Child tasks will receive a copy of this region.
`VM_INHERIT_NONE'
This region will be absent from child tasks.
Setting `vm_inherit' to `VM_INHERIT_SHARE' and forking a child
task is the only way two Mach tasks can share physical memory.
Remember that all the theads of a given task share all the same
memory.
The function returns `KERN_SUCCESS' if the memory inheritance was
successfully set and `KERN_INVALID_ADDRESS' if an invalid or
non-allocated address was specified.
-- Function: kern_return_t vm_wire (host_priv_t HOST_PRIV,
vm_task_t TARGET_TASK, vm_address_t ADDRESS, vm_size_t SIZE,
vm_prot_t ACCESS)
The function `vm_wire' allows privileged applications to control
memory pageability. HOST_PRIV is the privileged host port for the
host on which TARGET_TASK resides. ADDRESS is the starting
address, which will be rounded down to a page boundary. SIZE is
the size in bytes of the region for which protection is to change,
and will be rounded up to give a page boundary. ACCESS specifies
the types of accesses that must not cause page faults.
The semantics of a successful `vm_wire' operation are that memory
in the specified range will not cause page faults for any accesses
included in access. Data memory can be made non-pageable (wired)
with a access argument of `VM_PROT_READ | VM_PROT_WRITE'. A
special case is that `VM_PROT_NONE' makes the memory pageable.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_HOST' if HOST_PRIV was not the privileged host port,
`KERN_INVALID_TASK' if TASK was not a valid task,
`KERN_INVALID_VALUE' if ACCESS specified an invalid access mode,
`KERN_FAILURE' if some memory in the specified range is not
present or has an inappropriate protection value, and
`KERN_INVALID_ARGUMENT' if unwiring (ACCESS is `VM_PROT_NONE') and
the memory is not already wired.
The `vm_wire' call is actually an RPC to HOST_PRIV, normally a
send right for a privileged host port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return
`mach_msg' return codes.
-- Function: kern_return_t vm_machine_attribute (vm_task_t TASK,
vm_address_t ADDRESS, vm_size_t SIZE, vm_prot_t ACCESS,
vm_machine_attribute_t ATTRIBUTE,
vm_machine_attribute_val_t VALUE)
The function `vm_machine_attribute' specifies machine-specific
attributes for a VM mapping, such as cachability, migrability,
replicability. This is used on machines that allow the user
control over the cache (this is the case for MIPS architectures)
or placement of memory pages as in NUMA architectures (Non-Uniform
Memory Access time) such as the IBM ACE multiprocessor.
Machine-specific attributes can be consider additions to the
machine-independent ones such as protection and inheritance, but
they are not guaranteed to be supported by any given machine.
Moreover, implementations of Mach on new architectures might find
the need for new attribute types and or values besides the ones
defined in the initial implementation.
The types currently defined are
`MATTR_CACHE'
Controls caching of memory pages
`MATTR_MIGRATE'
Controls migrability of memory pages
`MATTR_REPLICATE'
Controls replication of memory pages
Corresponding values, and meaning of a specific call to
`vm_machine_attribute'
`MATTR_VAL_ON'
Enables the attribute. Being enabled is the default value
for any applicable attribute.
`MATTR_VAL_OFF'
Disables the attribute, making memory non-cached, or
non-migratable, or non-replicatable.
`MATTR_VAL_GET'
Returns the current value of the attribute for the memory
segment. If the attribute does not apply uniformly to the
given range the value returned applies to the initial portion
of the segment only.
`MATTR_VAL_CACHE_FLUSH'
Flush the memory pages from the Cache. The size value in
this case might be meaningful even if not a multiple of the
page size, depending on the implementation.
`MATTR_VAL_ICACHE_FLUSH'
Same as above, applied to the Instruction Cache alone.
`MATTR_VAL_DCACHE_FLUSH'
Same as above, applied to the Data Cache alone.
The function returns `KERN_SUCCESS' if call succeeded, and
`KERN_INVALID_ARGUMENT' if TASK is not a task, or ADDRESS and SIZE
do not define a valid address range in task, or ATTRIBUTE is not a
valid attribute type, or it is not implemented, or VALUE is not a
permissible value for attribute.
File: mach.info, Node: Mapping Memory Objects, Next: Memory Statistics, Prev: Memory Attributes, Up: Virtual Memory Interface
5.5 Mapping Memory Objects
==========================
-- Function: kern_return_t vm_map (vm_task_t TARGET_TASK,
vm_address_t *ADDRESS, vm_size_t SIZE, vm_address_t MASK,
boolean_t ANYWHERE, memory_object_t MEMORY_OBJECT,
vm_offset_t OFFSET, boolean_t COPY, vm_prot_t CUR_PROTECTION,
vm_prot_t MAX_PROTECTION, vm_inherit_t INHERITANCE)
The function `vm_map' maps a region of virtual memory at the
specified address, for which data is to be supplied by the given
memory object, starting at the given offset within that object.
In addition to the arguments used in `vm_allocate', the `vm_map'
call allows the specification of an address alignment parameter,
and of the initial protection and inheritance values.
If the memory object in question is not currently in use, the
kernel will perform a `memory_object_init' call at this time. If
the copy parameter is asserted, the specified region of the memory
object will be copied to this address space; changes made to this
object by other tasks will not be visible in this mapping, and
changes made in this mapping will not be visible to others (or
returned to the memory object).
The `vm_map' call returns once the mapping is established.
Completion of the call does not require any action on the part of
the memory manager.
Warning: Only memory objects that are provided by bona fide memory
managers should be used in the `vm_map' call. A memory manager
must implement the memory object interface described elsewhere in
this manual. If other ports are used, a thread that accesses the
mapped virtual memory may become permanently hung or may receive a
memory exception.
TARGET_TASK is the task to be affected. The starting address is
ADDRESS. If the ANYWHERE option is used, this address is ignored.
The address actually allocated will be returned in ADDRESS. SIZE
is the number of bytes to allocate (rounded by the system in a
machine dependent way). The alignment restriction is specified by
MASK. Bits asserted in this mask must not be asserted in the
address returned. If ANYWHERE is set, the kernel should find and
allocate any region of the specified size, and return the address
of the resulting region in ADDRESS.
MEMORY_OBJECT is the port that represents the memory object: used
by user tasks in `vm_map'; used by the make requests for data or
other management actions. If this port is `MEMORY_OBJECT_NULL',
then zero-filled memory is allocated instead. Within a memory
object, OFFSET specifes an offset in bytes. This must be page
aligned. If COPY is set, the range of the memory object should be
copied to the target task, rather than mapped read-write.
The function returns `KERN_SUCCESS' if the object is mapped,
`KERN_NO_SPACE' if no unused region of the task's virtual address
space that meets the address, size, and alignment criteria could be
found, and `KERN_INVALID_ARGUMENT' if an invalid argument was
provided.
File: mach.info, Node: Memory Statistics, Prev: Mapping Memory Objects, Up: Virtual Memory Interface
5.6 Memory Statistics
=====================
-- Data type: vm_statistics_data_t
This structure is returned in VM_STATS by the `vm_statistics'
function and provides virtual memory statistics for the system.
It has the following members:
`long pagesize'
The page size in bytes.
`long free_count'
The number of free pages.
`long active_count'
The umber of active pages.
`long inactive_count'
The number of inactive pages.
`long wire_count'
The number of pages wired down.
`long zero_fill_count'
The number of zero filled pages.
`long reactivations'
The number of reactivated pages.
`long pageins'
The number of pageins.
`long pageouts'
The number of pageouts.
`long faults'
The number of faults.
`long cow_faults'
The number of copy-on-writes.
`long lookups'
The number of object cache lookups.
`long hits'
The number of object cache hits.
-- Function: kern_return_t vm_statistics (vm_task_t TARGET_TASK,
vm_statistics_data_t *VM_STATS)
The function `vm_statistics' returns the statistics about the
kernel's use of virtual memory since the kernel was booted.
`pagesize' can also be found as a global variable `vm_page_size'
which is set at task initialization and remains constant for the
life of the task.
File: mach.info, Node: External Memory Management, Next: Threads and Tasks, Prev: Virtual Memory Interface, Up: Top
6 External Memory Management
****************************
* Menu:
* Memory Object Server:: The basics of external memory management.
* Memory Object Creation:: How new memory objects are created.
* Memory Object Termination:: How memory objects are terminated.
* Memory Objects and Data:: Data transfer to and from memory objects.
* Memory Object Locking:: How memory objects are locked.
* Memory Object Attributes:: Manipulating attributes of memory objects.
* Default Memory Manager:: Setting and using the default memory manager.
File: mach.info, Node: Memory Object Server, Next: Memory Object Creation, Up: External Memory Management
6.1 Memory Object Server
========================
-- Function: boolean_t memory_object_server (msg_header_t *IN_MSG,
msg_header_t *OUT_MSG)
-- Function: boolean_t memory_object_default_server
(msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
-- Function: boolean_t seqnos_memory_object_server
(msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
-- Function: boolean_t seqnos_memory_object_default_server
(msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
A memory manager is a server task that responds to specific
messages from the kernel in order to handle memory management
functions for the kernel.
In order to isolate the memory manager from the specifics of
message formatting, the remote procedure call generator produces a
procedure, `memory_object_server', to handle a received message.
This function does all necessary argument handling, and actually
calls one of the following functions: `memory_object_init',
`memory_object_data_write', `memory_object_data_return',
`memory_object_data_request', `memory_object_data_unlock',
`memory_object_lock_completed', `memory_object_copy',
`memory_object_terminate'. The *default memory manager* may get
two additional requests from the kernel: `memory_object_create'
and `memory_object_data_initialize'. The remote procedure call
generator produces a procedure `memory_object_default_server' to
handle those functions specific to the default memory manager.
The `seqnos_memory_object_server' and
`seqnos_memory_object_default_server' differ from
`memory_object_server' and `memory_object_default_server' in that
they supply message sequence numbers to the server interfaces.
They call the `seqnos_memory_object_*' functions, which complement
the `memory_object_*' set of functions.
The return value from the `memory_object_server' function indicates
that the message was appropriate to the memory management interface
(returning `TRUE'), or that it could not handle this message
(returning `FALSE').
The IN_MSG argument is the message that has been received from the
kernel. The OUT_MSG is a reply message, but this is not used for
this server.
The function returns `TRUE' to indicate that the message in
question was applicable to this interface, and that the appropriate
routine was called to interpret the message. It returns `FALSE' to
indicate that the message did not apply to this interface, and
that no other action was taken.
File: mach.info, Node: Memory Object Creation, Next: Memory Object Termination, Prev: Memory Object Server, Up: External Memory Management
6.2 Memory Object Creation
==========================
-- Function: kern_return_t memory_object_init
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL,
memory_object_name_t MEMORY_OBJECT_NAME,
vm_size_t MEMORY_OBJECT_PAGE_SIZE)
-- Function: kern_return_t seqnos_memory_object_init
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL,
memory_object_name_t MEMORY_OBJECT_NAME,
vm_size_t MEMORY_OBJECT_PAGE_SIZE)
The function `memory_object_init' serves as a notification that the
kernel has been asked to map the given memory object into a task's
virtual address space. Additionally, it provides a port on which
the memory manager may issue cache management requests, and a port
which the kernel will use to name this data region. In the event
that different each will perform a `memory_object_init' call with
new request and name ports. The virtual page size that is used by
the calling kernel is included for planning purposes.
When the memory manager is prepared to accept requests for data
for this object, it must call `memory_object_ready' with the
attribute. Otherwise the kernel will not process requests on this
object. To reject all mappings of this object, the memory manager
may use `memory_object_destroy'.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.)
MEMORY_OBJECT_NAME is a port used by the kernel to refer to the
memory object data in reponse to `vm_region' calls.
`memory_object_page_size' is the page size to be used by this
kernel. All data sizes in calls involving this kernel must be an
integral multiple of the page size. Note that different kernels,
indicated by a different `memory_control', may have different page
sizes.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_ready
(memory_object_control_t MEMORY_CONTROL,
boolean_t MAY_CACHE_OBJECT,
memory_object_copy_strategy_t COPY_STRATEGY)
The function `memory_object_ready' informs the kernel that the
memory manager is ready to receive data or unlock requests on
behalf of the clients. The argument MEMORY_CONTROL is the port,
provided by the kernel in a `memory_object_init' call, to which
cache management requests may be issued. If MAY_CACHE_OBJECT is
set, the kernel may keep data associated with this memory object,
even after virtual memory references to it are gone.
COPY_STRATEGY tells how the kernel should copy regions of the
associated memory object. There are three possible caching
strategies: `MEMORY_OBJECT_COPY_NONE' which specifies that nothing
special should be done when data in the object is copied;
`MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
should be notified via a `memory_object_copy' call before any part
of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
guarantees that the memory manager does not externally modify the
data so that the kernel can use its normal copy-on-write
algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
commonly used.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
File: mach.info, Node: Memory Object Termination, Next: Memory Objects and Data, Prev: Memory Object Creation, Up: External Memory Management
6.3 Memory Object Termination
=============================
-- Function: kern_return_t memory_object_terminate
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL,
memory_object_name_t MEMORY_OBJECT_NAME)
-- Function: kern_return_t seqnos_memory_object_terminate
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL,
memory_object_name_t MEMORY_OBJECT_NAME)
The function `memory_object_terminate' indicates that the kernel
has completed its use of the given memory object. All rights to
the memory object control and name ports are included, so that the
memory manager can destroy them (using `mach_port_deallocate')
after doing appropriate bookkeeping. The kernel will terminate a
memory object only after all address space mappings of that memory
object have been deallocated, or upon explicit request by the
memory manager.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.)
MEMORY_OBJECT_NAME is a port used by the kernel to refer to the
memory object data in reponse to `vm_region' calls.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_destroy
(memory_object_control_t MEMORY_CONTROL, kern_return_t REASON)
The function `memory_object_destroy' tells the kernel to shut down
the memory object. As a result of this call the kernel will no
longer support paging activity or any `memory_object' calls on this
object, and all rights to the memory object port, the memory
control port and the memory name port will be returned to the
memory manager in a memory_object_terminate call. If the memory
manager is concerned that any modified cached data be returned to
it before the object is terminated, it should call
`memory_object_lock_request' with SHOULD_FLUSH set and a lock
value of `VM_PROT_WRITE' before making this call.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. REASON is an error code indicating why the object must
be destroyed.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
File: mach.info, Node: Memory Objects and Data, Next: Memory Object Locking, Prev: Memory Object Termination, Up: External Memory Management
6.4 Memory Objects and Data
===========================
-- Function: kern_return_t memory_object_data_return
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY,
boolean_t KERNEL_COPY)
-- Function: kern_return_t seqnos_memory_object_data_return
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY,
boolean_t KERNEL_COPY)
The function `memory_object_data_return' provides the memory
manager with data that has been modified while cached in physical
memory. Once the memory manager no longer needs this data (e.g.,
it has been written to another storage medium), it should be
deallocated using `vm_deallocate'.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers. This
will be page aligned. DATA is the data which has been modified
while cached in physical memory. DATA_COUNT is the amount of data
to be written, in bytes. This will be an integral number of
memory object pages.
The kernel will also use this call to return precious pages. If an
unmodified precious age is returned, DIRTY is set to `FALSE',
otherwise it is `TRUE'. If KERNEL_COPY is `TRUE', the kernel kept
a copy of the page. Precious data remains precious if the kernel
keeps a copy. The indication that the kernel kept a copy is only
a hint if the data is not precious; the cleaned copy may be
discarded without further notifying the manager.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_data_request
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS)
-- Function: kern_return_t seqnos_memory_object_data_request
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS)
The function `memory_object_data_request' is a request for data
from the specified memory object, for at least the access
specified. The memory manager is expected to return at least the
specified data, with as much access as it can allow, using
`memory_object_data_supply'. If the memory manager is unable to
provide the data (for example, because of a hardware error), it
may use the `memory_object_data_error' call. The
`memory_object_data_unavailable' call may be used to tell the
kernel to supply zero-filled memory for this region.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers. This
will be page aligned. LENGTH is the number of bytes of data,
starting at OFFSET, to which this call refers. This will be an
integral number of memory object pages. DESIRED_ACCESS is a
protection value describing the memory access modes which must be
permitted on the specified cached data. One or more of:
`VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_data_supply
(memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE,
boolean_t PRECIOUS, mach_port_t REPLY)
The function `memory_object_data_supply' supplies the kernel with
data for the specified memory object. Ordinarily, memory managers
should only provide data in reponse to `memory_object_data_request'
calls from the kernel (but they may provide data in advance as
desired). When data already held by this kernel is provided
again, the new data is ignored. The kernel may not provide any
data (or protection) consistency among pages with different
virtual page alignments within the same object.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. OFFSET is an offset within a memory object in bytes.
This must be page aligned. DATA is the data that is being
provided to the kernel. This is a pointer to the data.
DATA_COUNT is the amount of data to be provided. Only whole
virtual pages of data can be accepted; partial pages will be
discarded.
LOCK_VALUE is a protection value indicating those forms of access
that should *not* be permitted to the specified cached data. The
lock values must be one or more of the set: `VM_PROT_NONE',
`VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE' and
`VM_PROT_ALL' as defined in `mach/vm_prot.h'.
If PRECIOUS is `FALSE', the kernel treats the data as a temporary
and may throw it away if it hasn't been changed. If the PRECIOUS
value is `TRUE', the kernel treats its copy as a data repository
and promises to return it to the manager; the manager may tell the
kernel to throw it away instead by flushing and not cleaning the
data (see `memory_object_lock_request').
If REPLY_TO is not `MACH_PORT_NULL', the kernel will send a
completion message to the provided port (see
`memory_object_supply_completed').
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_supply_completed
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH, kern_return_t RESULT,
vm_offset_t ERROR_OFFSET)
-- Function: kern_return_t seqnos_memory_object_supply_completed
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH, kern_return_t RESULT,
vm_offset_t ERROR_OFFSET)
The function `memory_object_supply_completed' indicates that a
previous `memory_object_data_supply' has been completed. Note that
this call is made on whatever port was specified in the
`memory_object_data_supply' call; that port need not be the memory
object port itself. No reply is expected after this call.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers.
LENGTH is the length of the data covered by the lock request. The
RESULT parameter indicates what happened during the supply. If it
is not `KERN_SUCCESS', then ERROR_OFFSET identifies the first
offset at which a problem occurred. The pagein operation stopped
at this point. Note that the only failures reported by this
mechanism are `KERN_MEMORY_PRESENT'. All other failures (invalid
argument, error on pagein of supplied data in manager's address
space) cause the entire operation to fail.
-- Function: kern_return_t memory_object_data_error
(memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t SIZE, kern_return_t REASON)
The function `memory_object_data_error' indicates that the memory
manager cannot return the data requested for the given region,
specifying a reason for the error. This is typically used when a
hardware error is encountered.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. OFFSET is an offset within a memory object in bytes.
This must be page aligned. DATA is the data that is being
provided to the kernel. This is a pointer to the data. SIZE is
the amount of cached data (starting at OFFSET) to be handled.
This must be an integral number of the memory object page size.
REASON is an error code indicating what type of error occured.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_data_unavailable
(memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t SIZE, kern_return_t REASON)
The function `memory_object_data_unavailable' indicates that the
memory object does not have data for the given region and that the
kernel should provide the data for this range. The memory manager
may use this call in three different situations.
1. The object was created by `memory_object_create' and the
kernel has not yet provided data for this range (either via a
`memory_object_data_initialize', `memory_object_data_write' or
a `memory_object_data_return' for the object.
2. The object was created by an `memory_object_data_copy' and the
kernel should copy this region from the original memory
object.
3. The object is a normal user-created memory object and the
kernel should supply unlocked zero-filled pages for the range.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. OFFSET is an offset within a memory object, in bytes.
This must be page aligned. SIZE is the amount of cached data
(starting at OFFSET) to be handled. This must be an integral
number of the memory object page size.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_copy
(memory_object_t OLD_MEMORY_OBJECT,
memory_object_control_t OLD_MEMORY_CONTROL,
vm_offset_t OFFSET, vm_size_t LENGTH,
memory_object_t NEW_MEMORY_OBJECT)
-- Function: kern_return_t seqnos_memory_object_copy
(memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t OLD_MEMORY_CONTROL,
vm_offset_t OFFSET, vm_size_t LENGTH,
memory_object_t NEW_MEMORY_OBJECT)
The function `memory_object_copy' indicates that a copy has been
made of the specified range of the given original memory object.
This call includes only the new memory object itself; a
`memory_object_init' call will be made on the new memory object
after the currently cached pages of the original object are
prepared. After the memory manager receives the init call, it
must reply with the `memory_object_ready' call to assert the
"ready" attribute. The kernel will use the new memory object,
control and name ports to refer to the new copy.
This call is made when the original memory object had the caching
parameter set to `MEMORY_OBJECT_COPY_CALL' and a user of the object
has asked the kernel to copy it.
Cached pages from the original memory object at the time of the
copy operation are handled as follows: Readable pages may be
silently copied to the new memory object (with all access
permissions). Pages not copied are locked to prevent write access.
The new memory object is *temporary*, meaning that the memory
manager should not change its contents or allow the memory object
to be mapped in another client. The memory manager may use the
`memory_object_data_unavailable' call to indicate that the
appropriate pages of the original memory object may be used to
fulfill the data request.
The argument OLD_MEMORY_OBJECT is the port that represents the old
memory object data. OLD_MEMORY_CONTROL is the kernel port for the
old object. OFFSET is the offset within a memory object to which
this call refers. This will be page aligned. LENGTH is the
number of bytes of data, starting at OFFSET, to which this call
refers. This will be an integral number of memory object pages.
NEW_MEMORY_OBJECT is a new memory object created by the kernel;
see synopsis for further description. Note that all port rights
(including receive rights) are included for the new memory object.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
The remaining interfaces in this section are obsolet.
-- Function: kern_return_t memory_object_data_write
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT)
-- Function: kern_return_t seqnos_memory_object_data_write
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT)
The function `memory_object_data_write' provides the memory manager
with data that has been modified while cached in physical memory.
It is the old form of `memory_object_data_return'. Once the
memory manager no longer needs this data (e.g., it has been written
to another storage medium), it should be deallocated using
`vm_deallocate'.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers. This
will be page aligned. DATA is the data which has been modified
while cached in physical memory. DATA_COUNT is the amount of data
to be written, in bytes. This will be an integral number of
memory object pages.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_data_provided
(memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE)
The function `memory_object_data_provided' supplies the kernel with
data for the specified memory object. It is the old form of
`memory_object_data_supply'. Ordinarily, memory managers should
only provide data in reponse to `memory_object_data_request' calls
from the kernel. The LOCK_VALUE specifies what type of access
will not be allowed to the data range. The lock values must be
one or more of the set: `VM_PROT_NONE', `VM_PROT_READ',
`VM_PROT_WRITE', `VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in
`mach/vm_prot.h'.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. OFFSET is an offset within a memory object in bytes.
This must be page aligned. DATA is the data that is being
provided to the kernel. This is a pointer to the data.
DATA_COUNT is the amount of data to be provided. This must be an
integral number of memory object pages. LOCK_VALUE is a
protection value indicating those forms of access that should
*not* be permitted to the specified cached data.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
File: mach.info, Node: Memory Object Locking, Next: Memory Object Attributes, Prev: Memory Objects and Data, Up: External Memory Management
6.5 Memory Object Locking
=========================
-- Function: kern_return_t memory_object_lock_request
(memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t SIZE, memory_object_return_t SHOULD_CLEAN,
boolean_t SHOULD_FLUSH, vm_prot_t LOCK_VALUE,
mach_port_t REPLY_TO)
The function `memory_object_lock_request' allows a memory manager
to make cache management requests. As specified in arguments to
the call, the kernel will:
* clean (i.e., write back using `memory_object_data_supply' or
`memory_object_data_write') any cached data which has been
modified since the last time it was written
* flush (i.e., remove any uses of) that data from memory
* lock (i.e., prohibit the specified uses of) the cached data
Locks applied to cached data are not cumulative; new lock values
override previous ones. Thus, data may also be unlocked using this
primitive. The lock values must be one or more of the following
values: `VM_PROT_NONE', `VM_PROT_READ', `VM_PROT_WRITE',
`VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in `mach/vm_prot.h'.
Only data which is cached at the time of this call is affected.
When a running thread requires a prohibited access to cached data,
the kernel will issue a `memory_object_data_unlock' call
specifying the forms of access required.
Once all of the actions requested by this call have been
completed, the kernel issues a `memory_object_lock_completed' call
on the specified reply port.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. OFFSET is an offset within a memory object, in bytes.
This must be page aligned. SIZE is the amount of cached data
(starting at OFFSET) to be handled. This must be an integral
number of the memory object page size. If SHOULD_CLEAN is set,
modified data should be written back to the memory manager. If
SHOULD_FLUSH is set, the specified cached data should be
invalidated, and all uses of that data should be revoked.
LOCK_VALUE is a protection value indicating those forms of access
that should *not* be permitted to the specified cached data.
REPLY_TO is a port on which a `memory_object_lock_comleted' call
should be issued, or `MACH_PORT_NULL' if no acknowledgement is
desired.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_lock_completed
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH)
-- Function: kern_return_t seqnos_memory_object_lock_completed
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH)
The function `memory_object_lock_completed' indicates that a
previous `memory_object_lock_request' has been completed. Note
that this call is made on whatever port was specified in the
`memory_object_lock_request' call; that port need not be the memory
object port itself. No reply is expected after this call.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers.
LENGTH is the length of the data covered by the lock request.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_data_unlock
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS)
-- Function: kern_return_t seqnos_memory_object_data_unlock
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS)
The function `memory_object_data_unlock' is a request that the
memory manager permit at least the desired access to the specified
data cached by the kernel. A call to `memory_object_lock_request'
is expected in response.
The argument MEMORY_OBJECT is the port that represents the memory
object data, as supplied to the kernel in a `vm_map' call.
MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers. This
will be page aligned. LENGTH is the number of bytes of data,
starting at OFFSET, to which this call refers. This will be an
integral number of memory object pages. DESIRED_ACCESS a
protection value describing the memory access modes which must be
permitted on the specified cached data. One or more of:
`VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
File: mach.info, Node: Memory Object Attributes, Next: Default Memory Manager, Prev: Memory Object Locking, Up: External Memory Management
6.6 Memory Object Attributes
============================
-- Function: kern_return_t memory_object_get_attributes
(memory_object_control_t MEMORY_CONTROL,
boolean_t *OBJECT_READY, boolean_t *MAY_CACHE_OBJECT,
memory_object_copy_strategy_t *COPY_STRATEGY)
The function `memory_object_get_attribute' retrieves the current
attributes associated with the memory object.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. If OBJECT_READY is set, the kernel may issue new data
and unlock requests on the associated memory object. If
MAY_CACHE_OBJECT is set, the kernel may keep data associated with
this memory object, even after virtual memory references to it are
gone. COPY_STRATEGY tells how the kernel should copy regions of
the associated memory object.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_change_attributes
(memory_object_control_t MEMORY_CONTROL,
boolean_t MAY_CACHE_OBJECT,
memory_object_copy_strategy_t COPY_STRATEGY,
mach_port_t REPLY_TO)
The function `memory_object_change_attribute' sets
performance-related attributes for the specified memory object.
If the caching attribute is asserted, the kernel is permitted (and
encouraged) to maintain cached data for this memory object even
after no virtual address space contains this data.
There are three possible caching strategies:
`MEMORY_OBJECT_COPY_NONE' which specifies that nothing special
should be done when data in the object is copied;
`MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
should be notified via a `memory_object_copy' call before any part
of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
guarantees that the memory manager does not externally modify the
data so that the kernel can use its normal copy-on-write
algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
commonly used.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. If MAY_CACHE_OBJECT is set, the kernel may keep data
associated with this memory object, even after virtual memory
references to it are gone. COPY_STRATEGY tells how the kernel
should copy regions of the associated memory object. REPLY_TO is
a port on which a `memory_object_change_comleted' call will be
issued upon completion of the attribute change, or
`MACH_PORT_NULL' if no acknowledgement is desired.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
-- Function: kern_return_t memory_object_change_completed
(memory_object_t MEMORY_OBJECT, boolean_t MAY_CACHE_OBJECT,
memory_object_copy_strategy_t COPY_STRATEGY)
-- Function: kern_return_t seqnos_memory_object_change_completed
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
boolean_t MAY_CACHE_OBJECT,
memory_object_copy_strategy_t COPY_STRATEGY)
The function `memory_object_change_completed' indicates the
completion of an attribute change call.
The following interface is obsoleted by `memory_object_ready' and
`memory_object_change_attributes'. If the old form
`memory_object_set_attributes' is used to make a memory object ready,
the kernel will write back data using the old
`memory_object_data_write' interface rather than
`memory_object_data_return'..
-- Function: kern_return_t memory_object_set_attributes
(memory_object_control_t MEMORY_CONTROL,
boolean OBJECT_READY, boolean_t MAY_CACHE_OBJECT,
memory_object_copy_strategy_t COPY_STRATEGY)
The function `memory_object_set_attribute' controls how the the
memory object. The kernel will only make data or unlock requests
when the ready attribute is asserted. If the caching attribute is
asserted, the kernel is permitted (and encouraged) to maintain
cached data for this memory object even after no virtual address
space contains this data.
There are three possible caching strategies:
`MEMORY_OBJECT_COPY_NONE' which specifies that nothing special
should be done when data in the object is copied;
`MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
should be notified via a `memory_object_copy' call before any part
of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
guarantees that the memory manager does not externally modify the
data so that the kernel can use its normal copy-on-write
algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
commonly used.
The argument MEMORY_CONTROL is the port, provided by the kernel in
a `memory_object_init' call, to which cache management requests may
be issued. If OBJECT_READY is set, the kernel may issue new data
and unlock requests on the associated memory object. If
MAY_CACHE_OBJECT is set, the kernel may keep data associated with
this memory object, even after virtual memory references to it are
gone. COPY_STRATEGY tells how the kernel should copy regions of
the associated memory object.
This routine does not receive a reply message (and consequently
has no return value), so only message transmission errors apply.
File: mach.info, Node: Default Memory Manager, Prev: Memory Object Attributes, Up: External Memory Management
6.7 Default Memory Manager
==========================
-- Function: kern_return_t vm_set_default_memory_manager (host_t HOST,
mach_port_t *DEFAULT_MANAGER)
The function `vm_set_default_memory_manager' sets the kernel's
default memory manager. It sets the port to which newly-created
temporary memory objects are delivered by `memory_object_create' to
the host. The old memory manager port is returned. If
DEFAULT_MANAGER is `MACH_PORT_NULL' then this routine just returns
the current default manager port without changing it.
The argument HOST is a task port to the kernel whose default
memory manager is to be changed. DEFAULT_MANAGER is an in/out
parameter. As input, DEFAULT_MANAGER is the port that the new
memory manager is listening on for `memory_object_create' calls.
As output, it is the old default memory manager's port.
The function returns `KERN_SUCCESS' if the new memory manager is
installed, and `KERN_INVALID_ARGUMENT' if this task does not have
the privileges required for this call.
-- Function: kern_return_t memory_object_create
(memory_object_t OLD_MEMORY_OBJECT,
memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE,
memory_object_control_t NEW_CONTROL,
memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE)
-- Function: kern_return_t seqnos_memory_object_create
(memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE,
memory_object_control_t NEW_CONTROL,
memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE)
The function `memory_object_create' is a request that the given
memory manager accept responsibility for the given memory object
created by the kernel. This call will only be made to the system
*default memory manager*. The memory object in question initially
consists of zero-filled memory; only memory pages that are
actually written will ever be provided to
`memory_object_data_request' calls, the default memory manager must
use `memory_object_data_unavailable' for any pages that have not
previously been written.
No reply is expected after this call. Since this call is directed
to the default memory manager, the kernel assumes that it will be
ready to handle data requests to this object and does not need the
confirmation of a `memory_object_set_attributes' call.
The argument OLD_MEMORY_OBJECT is a memory object provided by the
default memory manager on which the kernel can make
`memory_object_create' calls. NEW_MEMORY_OBJECT is a new memory
object created by the kernel; see synopsis for further
description. Note that all port rights (including receive rights)
are included for the new memory object. NEW_OBJECT_SIZE is the
maximum size of the new object. NEW_CONTROL is a port, created by
the kernel, on which a memory manager may issue cache management
requests for the new object. NEW_NAME a port used by the kernel
to refer to the new memory object data in response to `vm_region'
calls. NEW_PAGE_SIZE is the page size to be used by this kernel.
All data sizes in calls involving this kernel must be an integral
multiple of the page size. Note that different kernels, indicated
by different a `memory_control', may have different page sizes.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
-- Function: kern_return_t memory_object_data_initialize
(memory_object_t MEMORY_OBJECT,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT)
-- Function: kern_return_t seqnos_memory_object_data_initialize
(memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
vm_offset_t DATA, vm_size_t DATA_COUNT)
The function `memory_object_data_initialize' provides the memory
manager with initial data for a kernel-created memory object. If
the memory manager already has been supplied data (by a previous
`memory_object_data_initialize', `memory_object_data_write' or
`memory_object_data_return'), then this data should be ignored.
Otherwise, this call behaves exactly as does
`memory_object_data_return' on memory objects created by the kernel
via `memory_object_create' and thus will only be made to default
memory managers. This call will not be made on objects created via
`memory_object_copy'.
The argument MEMORY_OBJECT the port that represents the memory
object data, as supplied by the kernel in a `memory_object_create'
call. MEMORY_CONTROL is the request port to which a response is
requested. (In the event that a memory object has been supplied
to more than one the kernel that has made the request.) OFFSET is
the offset within a memory object to which this call refers. This
will be page aligned. DATA os the data which has been modified
while cached in physical memory. DATA_COUNT is the amount of data
to be written, in bytes. This will be an integral number of
memory object pages.
The function should return `KERN_SUCCESS', but since this routine
is called by the kernel, which does not wait for a reply message,
this value is ignored.
File: mach.info, Node: Threads and Tasks, Next: Host Interface, Prev: External Memory Management, Up: Top
7 Threads and Tasks
*******************
* Menu:
* Thread Interface:: Manipulating threads.
* Task Interface:: Manipulating tasks.
* Profiling:: Profiling threads and tasks.
File: mach.info, Node: Thread Interface, Next: Task Interface, Up: Threads and Tasks
7.1 Thread Interface
====================
-- Data type: thread_t
This is a `mach_port_t' and used to hold the port name of a thread
port that represents the thread. Manipulations of the thread are
implemented as remote procedure calls to the thread port. A
thread can get a port to itself with the `mach_thread_self' system
call.
* Menu:
* Thread Creation:: Creating new threads.
* Thread Termination:: Terminating existing threads.
* Thread Information:: How to get informations on threads.
* Thread Settings:: How to set threads related informations.
* Thread Execution:: How to control the thread's machine state.
* Scheduling:: Operations on thread scheduling.
* Thread Special Ports:: How to handle the thread's special ports.
* Exceptions:: Managing exceptions.
File: mach.info, Node: Thread Creation, Next: Thread Termination, Up: Thread Interface
7.1.1 Thread Creation
---------------------
-- Function: kern_return_t thread_create (task_t PARENT_TASK,
thread_t *CHILD_THREAD)
The function `thread_create' creates a new thread within the task
specified by PARENT_TASK. The new thread has no processor state,
and has a suspend count of 1. To get a new thread to run, first
`thread_create' is called to get the new thread's identifier,
(CHILD_THREAD). Then `thread_set_state' is called to set a
processor state, and finally `thread_resume' is called to get the
thread scheduled to execute.
When the thread is created send rights to its thread kernel port
are given to it and returned to the caller in CHILD_THREAD. The
new thread's exception port is set to `MACH_PORT_NULL'.
The function returns `KERN_SUCCESS' if a new thread has been
created, `KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid
task and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource
is not available.
File: mach.info, Node: Thread Termination, Next: Thread Information, Prev: Thread Creation, Up: Thread Interface
7.1.2 Thread Termination
------------------------
-- Function: kern_return_t thread_terminate (thread_t TARGET_THREAD)
The function `thread_terminate' destroys the thread specified by
TARGET_THREAD.
The function returns `KERN_SUCCESS' if the thread has been killed
and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread.
File: mach.info, Node: Thread Information, Next: Thread Settings, Prev: Thread Termination, Up: Thread Interface
7.1.3 Thread Information
------------------------
-- Function: thread_t mach_thread_self ()
The `mach_thread_self' system call returns the calling thread's
thread port.
`mach_thread_self' has an effect equivalent to receiving a send
right for the thread port. `mach_thread_self' returns the name of
the send right. In particular, successive calls will increase the
calling task's user-reference count for the send right.
As a special exception, the kernel will overrun the user reference
count of the thread name port, so that this function can not fail
for that reason. Because of this, the user should not deallocate
the port right if an overrun might have happened. Otherwise the
reference count could drop to zero and the send right be destroyed
while the user still expects to be able to use it. As the kernel
does not make use of the number of extant send rights anyway, this
is safe to do (the thread port itself is not destroyed, even when
there are no send rights anymore).
The function returns `MACH_PORT_NULL' if a resource shortage
prevented the reception of the send right or if the thread port is
currently null and `MACH_PORT_DEAD' if the thread port is currently
dead.
-- Function: kern_return_t thread_info (thread_t TARGET_THREAD,
int FLAVOR, thread_info_t THREAD_INFO,
mach_msg_type_number_t *THREAD_INFOCNT)
The function `thread_info' returns the selected information array
for a thread, as specified by FLAVOR.
THREAD_INFO is an array of integers that is supplied by the caller
and returned filled with specified information. THREAD_INFOCNT is
supplied as the maximum number of integers in THREAD_INFO. On
return, it contains the actual number of integers in THREAD_INFO.
The maximum number of integers returned by any flavor is
`THREAD_INFO_MAX'.
The type of information returned is defined by FLAVOR, which can
be one of the following:
`THREAD_BASIC_INFO'
The function returns basic information about the thread, as
defined by `thread_basic_info_t'. This includes the user and
system time, the run state, and scheduling priority. The
number of integers returned is `THREAD_BASIC_INFO_COUNT'.
`THREAD_SCHED_INFO'
The function returns information about the schduling policy
for the thread as defined by `thread_sched_info_t'. The
number of integers returned is `THREAD_SCHED_INFO_COUNT'.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or FLAVOR
is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
the returned info array is too large for THREAD_INFO. In this
case, THREAD_INFO is filled as much as possible and THREAD_INFOCNT
is set to the number of elements that would have been returned if
there were enough room.
-- Data type: struct thread_basic_info
This structure is returned in THREAD_INFO by the `thread_info'
function and provides basic information about the thread. You can
cast a variable of type `thread_info_t' to a pointer of this type
if you provided it as the THREAD_INFO parameter for the
`THREAD_BASIC_INFO' flavor of `thread_info'. It has the following
members:
`time_value_t user_time'
user run time
`time_value_t system_time'
system run time
`int cpu_usage'
Scaled cpu usage percentage. The scale factor is
`TH_USAGE_SCALE'.
`int base_priority'
The base scheduling priority of the thread.
`int cur_priority'
The current scheduling priority of the thread.
`integer_t run_state'
The run state of the thread. The possible vlues of this
field are:
`TH_STATE_RUNNING'
The thread is running normally.
`TH_STATE_STOPPED'
The thread is suspended.
`TH_STATE_WAITING'
The thread is waiting normally.
`TH_STATE_UNINTERRUPTIBLE'
The thread is in an uninterruptible wait.
`TH_STATE_HALTED'
The thread is halted at a clean point.
`flags'
Various flags. The possible values of this field are:
`TH_FLAGS_SWAPPED'
The thread is swapped out.
`TH_FLAGS_IDLE'
The thread is an idle thread.
`int suspend_count'
The suspend count for the thread.
`int sleep_time'
The number of seconds that the thread has been sleeping.
`time_value_t creation_time'
The time stamp of creation.
-- Data type: thread_basic_info_t
This is a pointer to a `struct thread_basic_info'.
-- Data type: struct thread_sched_info
This structure is returned in THREAD_INFO by the `thread_info'
function and provides schedule information about the thread. You
can cast a variable of type `thread_info_t' to a pointer of this
type if you provided it as the THREAD_INFO parameter for the
`THREAD_SCHED_INFO' flavor of `thread_info'. It has the following
members:
`int policy'
The scheduling policy of the thread, *Note Scheduling
Policy::.
`integer_t data'
Policy-dependent scheduling information, *Note Scheduling
Policy::.
`int base_priority'
The base scheduling priority of the thread.
`int max_priority'
The maximum scheduling priority of the thread.
`int cur_priority'
The current scheduling priority of the thread.
`int depressed'
`TRUE' if the thread is depressed.
`int depress_priority'
The priority the thread was depressed from.
-- Data type: thread_sched_info_t
This is a pointer to a `struct thread_sched_info'.
File: mach.info, Node: Thread Settings, Next: Thread Execution, Prev: Thread Information, Up: Thread Interface
7.1.4 Thread Settings
---------------------
-- Function: kern_return_t thread_wire (host_priv_t HOST_PRIV,
thread_t THREAD, boolean_t WIRED)
The function `thread_wire' controls the VM privilege level of the
thread THREAD. A VM-privileged thread never waits inside the
kernel for memory allocation from the kernel's free list of pages
or for allocation of a kernel stack.
Threads that are part of the default pageout path should be
VM-privileged, to prevent system deadlocks. Threads that are not
part of the default pageout path should not be VM-privileged, to
prevent the kernel's free list of pages from being exhausted.
The functions returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if HOST_PRIV or THREAD was invalid.
The `thread_wire' call is actually an RPC to HOST_PRIV, normally a
send right for a privileged host port, but potentially any send
right. In addition to the normal diagnostic return codes from the
call's server (normally the kernel), the call may return `mach_msg'
return codes.
File: mach.info, Node: Thread Execution, Next: Scheduling, Prev: Thread Settings, Up: Thread Interface
7.1.5 Thread Execution
----------------------
-- Function: kern_return_t thread_suspend (thread_t TARGET_THREAD)
Increments the thread's suspend count and prevents the thread from
executing any more user level instructions. In this context a user
level instruction is either a machine instruction executed in user
mode or a system trap instruction including page faults. Thus if
a thread is currently executing within a system trap the kernel
code may continue to execute until it reaches the system return
code or it may supend within the kernel code. In either case,
when the thread is resumed the system trap will return. This
could cause unpredictible results if the user did a suspend and
then altered the user state of the thread in order to change its
direction upon a resume. The call `thread_abort' is provided to
allow the user to abort any system call that is in progress in a
predictable way.
The suspend count may become greater than one with the effect that
it will take more than one resume call to restart the thread.
The function returns `KERN_SUCCESS' if the thread has been
suspended and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a
thread.
-- Function: kern_return_t thread_resume (thread_t TARGET_THREAD)
Decrements the threads's suspend count. If the count becomes zero
the thread is resumed. If it is still positive, the thread is left
suspended. The suspend count may not become negative.
The function returns `KERN_SUCCESS' if the thread has been resumed,
`KERN_FAILURE' if the suspend count is already zero and
`KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread.
-- Function: kern_return_t thread_abort (thread_t TARGET_THREAD)
The function `thread_abort' aborts the kernel primitives:
`mach_msg', `msg_send', `msg_receive' and `msg_rpc' and
page-faults, making the call return a code indicating that it was
interrupted. The call is interrupted whether or not the thread
(or task containing it) is currently suspended. If it is
supsended, the thread receives the interupt when it is resumed.
A thread will retry an aborted page-fault if its state is not
modified before it is resumed. `msg_send' returns
`SEND_INTERRUPTED'; `msg_receive' returns `RCV_INTERRUPTED';
`msg_rpc' returns either `SEND_INTERRUPTED' or `RCV_INTERRUPTED',
depending on which half of the RPC was interrupted.
The main reason for this primitive is to allow one thread to
cleanly stop another thread in a manner that will allow the future
execution of the target thread to be controlled in a predictable
way. `thread_suspend' keeps the target thread from executing any
further instructions at the user level, including the return from
a system call. `thread_get_state'/`thread_set_state' allows the
examination or modification of the user state of a target thread.
However, if a suspended thread was executing within a system call,
it also has associated with it a kernel state. This kernel state
can not be modified by `thread_set_state' with the result that
when the thread is resumed the system call may return changing the
user state and possibly user memory. `thread_abort' aborts the
kernel call from the target thread's point of view by resetting
the kernel state so that the thread will resume execution at the
system call return with the return code value set to one of the
interrupted codes. The system call itself will either be entirely
completed or entirely aborted, depending on the precise moment at
which the abort was received. Thus if the thread's user state has
been changed by `thread_set_state', it will not be modified by any
unexpected system call side effects.
For example to simulate a Unix signal, the following sequence of
calls may be used:
1. `thread_suspend': Stops the thread.
2. `thread_abort': Interrupts any system call in progress,
setting the return value to `interrupted'. Since the thread
is stopped, it will not return to user code.
3. `thread_set_state': Alters thread's state to simulate a
procedure call to the signal handler
4. `thread_resume': Resumes execution at the signal handler. If
the thread's stack has been correctly set up, the thread may
return to the interrupted system call. (Of course, the code
to push an extra stack frame and change the registers is VERY
machine-dependent.)
Calling `thread_abort' on a non-suspended thread is pretty risky,
since it is very difficult to know exactly what system trap, if
any, the thread might be executing and whether an interrupt return
would cause the thread to do something useful.
The function returns `KERN_SUCCESS' if the thread received an
interrupt and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a
thread.
-- Function: kern_return_t thread_get_state (thread_t TARGET_THREAD,
int FLAVOR, thread_state_t OLD_STATE,
mach_msg_type_number_t *OLD_STATECNT)
The function `thread_get_state' returns the execution state (e.g.
the machine registers) of TARGET_THREAD as specified by FLAVOR.
The OLD_STATE is an array of integers that is provided by the
caller and returned filled with the specified information.
OLD_STATECNT is input set to the maximum number of integers in
OLD_STATE and returned equal to the actual number of integers in
OLD_STATE.
TARGET_THREAD may not be `mach_thread_self()'.
The definition of the state structures can be found in
`machine/thread_status.h'.
The function returns `KERN_SUCCESS' if the state has been returned,
`KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is
`mach_thread_self' or FLAVOR is unrecogized for this machine. The
function returns `MIG_ARRAY_TOO_LARGE' if the returned state is
too large for OLD_STATE. In this case, OLD_STATE is filled as
much as possible and OLD_STATECNT is set to the number of elements
that would have been returned if there were enough room.
-- Function: kern_return_t thread_set_state (thread_t TARGET_THREAD,
int FLAVOR, thread_state_t NEW_STATE,
mach_msg_type_number_t NEW_STATE_COUNT)
The function `thread_set_state' sets the execution state (e.g. the
machine registers) of TARGET_THREAD as specified by FLAVOR. The
NEW_STATE is an array of integers. NEW_STATE_COUNT is the number
of elements in NEW_STATE. The entire set of registers is reset.
This will do unpredictable things if TARGET_THREAD is not
suspended.
TARGET_THREAD may not be `mach_thread_self'.
The definition of the state structures can be found in
`machine/thread_status.h'.
The function returns `KERN_SUCCESS' if the state has been set and
`KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is
`mach_thread_self' or FLAVOR is unrecogized for this machine.
File: mach.info, Node: Scheduling, Next: Thread Special Ports, Prev: Thread Execution, Up: Thread Interface
7.1.6 Scheduling
----------------
* Menu:
* Thread Priority:: Changing the priority of a thread.
* Hand-Off Scheduling:: Switching to a new thread.
* Scheduling Policy:: Setting the scheduling policy.
File: mach.info, Node: Thread Priority, Next: Hand-Off Scheduling, Up: Scheduling
7.1.6.1 Thread Priority
.......................
Threads have three priorities associated with them by the system, a
priority, a maximum priority, and a scheduled priority. The scheduled
priority is used to make scheduling decisions about the thread. It is
determined from the priority by the policy (for timesharing, this means
adding an increment derived from cpu usage). The priority can be set
under user control, but may never exceed the maximum priority. Changing
the maximum priority requires presentation of the control port for the
thread's processor set; since the control port for the default processor
set is privileged, users cannot raise their maximum priority to unfairly
compete with other users on that set. Newly created threads obtain
their priority from their task and their max priority from the thread.
-- Function: kern_return_t thread_priority (thread_t THREAD,
int PRORITY, boolean_t SET_MAX)
The function `thread_priority' changes the priority and optionally
the maximum priority of THREAD. Priorities range from 0 to 31,
where lower numbers denote higher priorities. If the new priority
is higher than the priority of the current thread, preemption may
occur as a result of this call. The maximum priority of the
thread is also set if SET_MAX is `TRUE'. This call will fail if
PRIORITY is greater than the current maximum priority of the
thread. As a result, this call can only lower the value of a
thread's maximum priority.
The functions returns `KERN_SUCCESS' if the operation completed
successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or
PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the
requested operation would violate the thread's maximum priority
(thread_priority).
-- Function: kern_return_t thread_max_priority (thread_t THREAD,
processor_set_t PROCESSOR_SET, int PRIORITY)
The function `thread_max_priority' changes the maximum priority of
the thread. Because it requires presentation of the corresponding
processor set port, this call can reset the maximum priority to any
legal value.
The functions returns `KERN_SUCCESS' if the operation completed
successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or
PROCESSOR_SET is not a control port for a processor set or
PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the
thread is not assigned to the processor set whose control port was
presented.
File: mach.info, Node: Hand-Off Scheduling, Next: Scheduling Policy, Prev: Thread Priority, Up: Scheduling
7.1.6.2 Hand-Off Scheduling
...........................
-- Function: kern_return_t thread_switch (thread_t NEW_THREAD,
int OPTION, int TIME)
The function `thread_switch' provides low-level access to the
scheduler's context switching code. NEW_THREAD is a hint that
implements hand-off scheduling. The operating system will attempt
to switch directly to the new thread (by passing the normal logic
that selects the next thread to run) if possible. Since this is a
hint, it may be incorrect; it is ignored if it doesn't specify a
thread on the same host as the current thread or if that thread
can't be switched to (i.e., not runnable or already running on
another processor). In this case, the normal logic to select the
next thread to run is used; the current thread may continue
running if there is no other appropriate thread to run.
Options for OPTION are defined in `mach/thread_switch.h' and
specify the interpretation of TIME. The possible values for
OPTION are:
`SWITCH_OPTION_NONE'
No options, the time argument is ignored.
`SWITCH_OPTION_WAIT'
The thread is blocked for the specified time. This can be
aborted by `thread_abort'.
`SWITCH_OPTION_DEPRESS'
The thread's priority is depressed to the lowest possible
value for the specified time. This can be aborted by
`thread_depress_abort'. This depression is independent of
operations that change the thread's priority (e.g.
`thread_priority' will not abort the depression). The
minimum time and units of time can be obtained as the
`min_timeout' value from `host_info'. The depression is also
aborted when the current thread is next run (either via
hand�off scheduling or because the processor set has nothing
better to do).
`thread_switch' is often called when the current thread can proceed
no further for some reason; the various options and arguments allow
information about this reason to be transmitted to the kernel. The
NEW_THREAD argument (handoff scheduling) is useful when the
identity of the thread that must make progress before the current
thread runs again is known. The `WAIT' option is used when the
amount of time that the current thread must wait before it can do
anything useful can be estimated and is fairly long. The
`DEPRESS' option is used when the amount of time that must be
waited is fairly short, especially when the identity of the thread
that is being waited for is not known.
Users should beware of calling `thread_switch' with an invalid hint
(e.g. `MACH_PORT_NULL') and no option. Because the time-sharing
scheduler varies the priority of threads based on usage, this may
result in a waste of cpu time if the thread that must be run is of
lower priority. The use of the `DEPRESS' option in this situation
is highly recommended.
`thread_switch' ignores policies. Users relying on the preemption
semantics of a fixed time policy should be aware that
`thread_switch' ignores these semantics; it will run the specified
NEW_THREAD indepent of its priority and the priority of any other
threads that could be run instead.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if THREAD is not a thread or OPTION is not
a recognized option, and `KERN_FAILURE' if `kern_depress_abort'
failed because the thread was not depressed.
-- Function: kern_return_t thread_depress_abort (thread_t THREAD)
The function `thread_depress_abort' cancels any priority depression
for THREAD caused by a `swtch_pri' or `thread_switch' call.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if THREAD is not a valid thread.
-- Function: boolean_t swtch ()
The system trap `swtch' attempts to switch the current thread off
the processor. The return value indicates if more than the current
thread is running in the processor set. This is useful for lock
management routines.
The call returns `FALSE' if the thread is justified in becoming a
resource hog by continuing to spin because there's nothing else
useful that the processor could do. `TRUE' is returned if the
thread should make one more check on the lock and then be a good
citizen and really suspend.
-- Function: boolean_t swtch_pri (int PRIORITY)
The system trap `swtch_pri' attempts to switch the current thread
off the processor as `swtch' does, but depressing the priority of
the thread to the minimum possible value during the time.
PRIORITY is not used currently.
The return value is as for `swtch'.
File: mach.info, Node: Scheduling Policy, Prev: Hand-Off Scheduling, Up: Scheduling
7.1.6.3 Scheduling Policy
.........................
-- Function: kern_return_t thread_policy (thread_t THREAD, int POLICY,
int DATA)
The function `thread_policy' changes the scheduling policy for
THREAD to POLICY.
DATA is policy-dependent scheduling information. There are
currently two supported policies: `POLICY_TIMESHARE' and
`POLICY_FIXEDPRI' defined in `mach/policy.h'; this file is
included by `mach.h'. DATA is meaningless for timesharing, but is
the quantum to be used (in milliseconds) for the fixed priority
policy. To be meaningful, this quantum must be a multiple of the
basic system quantum (min_quantum) which can be obtained from
`host_info'. The system will always round up to the next multiple
of the quantum.
Processor sets may restrict the allowed policies, so this call
will fail if the processor set to which THREAD is currently
assigned does not permit POLICY.
The function returns `KERN_SUCCESS' if the call succeeded.
`KERN_INVALID_ARGUMENT' if THREAD is not a thread or POLICY is not
a recognized policy, and `KERN_FAILURE' if the processor set to
which THREAD is currently assigned does not permit POLICY.
File: mach.info, Node: Thread Special Ports, Next: Exceptions, Prev: Scheduling, Up: Thread Interface
7.1.7 Thread Special Ports
--------------------------
-- Function: kern_return_t thread_get_special_port (thread_t THREAD,
int WHICH_PORT, mach_port_t *SPECIAL_PORT)
The function `thread_get_special_port' returns send rights to one
of a set of special ports for the thread specified by THREAD.
The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and
`THREAD_EXCEPTION_PORT'. A thread also has access to its task's
special ports.
The function returns `KERN_SUCCESS' if the port was returned and
`KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is
an invalid port selector.
-- Function: kern_return_t thread_get_kernel_port (thread_t THREAD,
mach_port_t *KERNEL_PORT)
The function `thread_get_kernel_port' is equivalent to the function
`thread_get_special_port' with the WHICH_PORT argument set to
`THREAD_KERNEL_PORT'.
-- Function: kern_return_t thread_get_exception_port (thread_t THREAD,
mach_port_t *EXCEPTION_PORT)
The function `thread_get_exception_port' is equivalent to the
function `thread_get_special_port' with the WHICH_PORT argument
set to `THREAD_EXCEPTION_PORT'.
-- Function: kern_return_t thread_set_special_port (thread_t THREAD,
int WHICH_PORT, mach_port_t SPECIAL_PORT)
The function `thread_set_special_port' sets one of a set of special
ports for the thread specified by THREAD.
The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and
`THREAD_EXCEPTION_PORT'. A thread also has access to its task's
special ports.
The function returns `KERN_SUCCESS' if the port was set and
`KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is
an invalid port selector.
-- Function: kern_return_t thread_set_kernel_port (thread_t THREAD,
mach_port_t KERNEL_PORT)
The function `thread_set_kernel_port' is equivalent to the function
`thread_set_special_port' with the WHICH_PORT argument set to
`THREAD_KERNEL_PORT'.
-- Function: kern_return_t thread_set_exception_port (thread_t THREAD,
mach_port_t EXCEPTION_PORT)
The function `thread_set_exception_port' is equivalent to the
function `thread_set_special_port' with the WHICH_PORT argument
set to `THREAD_EXCEPTION_PORT'.
File: mach.info, Node: Exceptions, Prev: Thread Special Ports, Up: Thread Interface
7.1.8 Exceptions
----------------
-- Function: kern_return_t catch_exception_raise
(mach_port_t EXCEPTION_PORT, thread_t THREAD, task_t TASK,
int EXCEPTION, int CODE, int SUBCODE)
XXX Fixme
-- Function: kern_return_t exception_raise
(mach_port_t EXCEPTION_PORT, mach_port_t THREAD,
mach_port_t TASK, integer_t EXCEPTION, integer_t CODE,
integer_t SUBCODE)
XXX Fixme
-- Function: kern_return_t evc_wait (unsigned int EVENT)
The system trap `evc_wait' makes the calling thread wait for the
event specified by EVENT.
The call returns `KERN_SUCCESS' if the event has occured,
`KERN_NO_SPACE' if another thread is waiting for the same event and
`KERN_INVALID_ARGUMENT' if the event object is invalid.
File: mach.info, Node: Task Interface, Next: Profiling, Prev: Thread Interface, Up: Threads and Tasks
7.2 Task Interface
==================
-- Data type: task_t
This is a `mach_port_t' and used to hold the port name of a task
port that represents the thread. Manipulations of the task are
implemented as remote procedure calls to the task port. A task
can get a port to itself with the `mach_task_self' system call.
The task port name is also used to identify the task's IPC space
(*note Port Manipulation Interface::) and the task's virtual
memory map (*note Virtual Memory Interface::).
* Menu:
* Task Creation:: Creating tasks.
* Task Termination:: Terminating tasks.
* Task Information:: Informations on tasks.
* Task Execution:: Thread scheduling in a task.
* Task Special Ports:: How to get and set the task's special ports.
* Syscall Emulation:: How to emulate system calls.
File: mach.info, Node: Task Creation, Next: Task Termination, Up: Task Interface
7.2.1 Task Creation
-------------------
-- Function: kern_return_t task_create (task_t PARENT_TASK,
boolean_t INHERIT_MEMORY, task_t *CHILD_TASK)
The function `task_create' creates a new task from PARENT_TASK;
the resulting task (CHILD_TASK) acquires shared or copied parts of
the parent's address space (see `vm_inherit'). The child task
initially contains no threads.
If INHERIT_MEMORY is set, the child task's address space is built
from the parent task according to its memory inheritance values;
otherwise, the child task is given an empty address space.
The child task gets the three special ports created or copied for
it at task creation. The `TASK_KERNEL_PORT' is created and send
rights for it are given to the child and returned to the caller.
The `TASK_BOOTSTRAP_PORT' and the `TASK_EXCEPTION_PORT' are
inherited from the parent task. The new task can get send rights
to these ports with the call `task_get_special_port'.
The function returns `KERN_SUCCESS' if a new task has been created,
`KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid task port
and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource is
unavailable.
File: mach.info, Node: Task Termination, Next: Task Information, Prev: Task Creation, Up: Task Interface
7.2.2 Task Termination
----------------------
-- Function: kern_return_t task_terminate (task_t TARGET_TASK)
The function `task_terminate' destroys the task specified by
TARGET_TASK and all its threads. All resources that are used only
by this task are freed. Any port to which this task has receive
and ownership rights is destroyed.
The function returns `KERN_SUCCESS' if the task has been killed,
`KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
File: mach.info, Node: Task Information, Next: Task Execution, Prev: Task Termination, Up: Task Interface
7.2.3 Task Information
----------------------
-- Function: task_t mach_task_self ()
The `mach_task_self' system call returns the calling thread's task
port.
`mach_task_self' has an effect equivalent to receiving a send right
for the task port. `mach_task_self' returns the name of the send
right. In particular, successive calls will increase the calling
task's user-reference count for the send right.
As a special exception, the kernel will overrun the user reference
count of the task name port, so that this function can not fail
for that reason. Because of this, the user should not deallocate
the port right if an overrun might have happened. Otherwise the
reference count could drop to zero and the send right be destroyed
while the user still expects to be able to use it. As the kernel
does not make use of the number of extant send rights anyway, this
is safe to do (the task port itself is not destroyed, even when
there are no send rights anymore).
The funcion returns `MACH_PORT_NULL' if a resource shortage
prevented the reception of the send right, `MACH_PORT_NULL' if the
task port is currently null, `MACH_PORT_DEAD' if the task port is
currently dead.
-- Function: kern_return_t task_threads (task_t TARGET_TASK,
thread_array_t *THREAD_LIST,
mach_msg_type_number_t *THREAD_COUNT)
The function `task_threads' gets send rights to the kernel port for
each thread contained in TARGET_TASK. THREAD_LIST is an array
that is created as a result of this call. The caller may wish to
`vm_deallocate' this array when the data is no longer needed.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
-- Function: kern_return_t task_info (task_t TARGET_TASK, int FLAVOR,
task_info_t TASK_INFO,
mach_msg_type_number_t *TASK_INFO_COUNT)
The function `task_info' returns the selected information array for
a task, as specified by FLAVOR. TASK_INFO is an array of integers
that is supplied by the caller, and filled with specified
information. TASK_INFO_COUNT is supplied as the maximum number of
integers in TASK_INFO. On return, it contains the actual number
of integers in TASK_INFO. The maximum number of integers returned
by any flavor is `TASK_INFO_MAX'.
The type of information returned is defined by FLAVOR, which can
be one of the following:
`TASK_BASIC_INFO'
The function returns basic information about the task, as
defined by `task_basic_info_t'. This includes the user and
system time and memory consumption. The number of integers
returned is `TASK_BASIC_INFO_COUNT'.
`TASK_EVENTS_INFO'
The function returns information about events for the task as
defined by `thread_sched_info_t'. This includes statistics
about virtual memory and IPC events like pageouts, pageins
and messages sent and received. The number of integers
returned is `TASK_EVENTS_INFO_COUNT'.
`TASK_THREAD_TIMES_INFO'
The function returns information about the total time for
live threads as defined by `task_thread_times_info_t'. The
number of integers returned is `TASK_THREAD_TIMES_INFO_COUNT'.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if TARGET_TASK is not a thread or FLAVOR
is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
the returned info array is too large for TASK_INFO. In this case,
TASK_INFO is filled as much as possible and TASK_INFOCNT is set to
the number of elements that would have been returned if there were
enough room.
-- Data type: struct task_basic_info
This structure is returned in TASK_INFO by the `task_info'
function and provides basic information about the task. You can
cast a variable of type `task_info_t' to a pointer of this type if
you provided it as the TASK_INFO parameter for the
`TASK_BASIC_INFO' flavor of `task_info'. It has the following
members:
`integer_t suspend_count'
suspend count for task
`integer_t base_priority'
base scheduling priority
`vm_size_t virtual_size'
number of virtual pages
`vm_size_t resident_size'
number of resident pages
`time_value_t user_time'
total user run time for terminated threads
`time_value_t system_time'
total system run time for terminated threads
`time_value_t creation_time'
creation time stamp
-- Data type: task_basic_info_t
This is a pointer to a `struct task_basic_info'.
-- Data type: struct task_events_info
This structure is returned in TASK_INFO by the `task_info'
function and provides event statistics for the task. You can cast
a variable of type `task_info_t' to a pointer of this type if you
provided it as the TASK_INFO parameter for the `TASK_EVENTS_INFO'
flavor of `task_info'. It has the following members:
`natural_t faults'
number of page faults
`natural_t zero_fills'
number of zero fill pages
`natural_t reactivations'
number of reactivated pages
`natural_t pageins'
number of actual pageins
`natural_t cow_faults'
number of copy-on-write faults
`natural_t messages_sent'
number of messages sent
`natural_t messages_received'
number of messages received
-- Data type: task_events_info_t
This is a pointer to a `struct task_events_info'.
-- Data type: struct task_thread_times_info
This structure is returned in TASK_INFO by the `task_info'
function and provides event statistics for the task. You can cast
a variable of type `task_info_t' to a pointer of this type if you
provided it as the TASK_INFO parameter for the
`TASK_THREAD_TIMES_INFO' flavor of `task_info'. It has the
following members:
`time_value_t user_time'
total user run time for live threads
`time_value_t system_time'
total system run time for live threads
-- Data type: task_thread_times_info_t
This is a pointer to a `struct task_thread_times_info'.
File: mach.info, Node: Task Execution, Next: Task Special Ports, Prev: Task Information, Up: Task Interface
7.2.4 Task Execution
--------------------
-- Function: kern_return_t task_suspend (task_t TARGET_TASK)
The function `task_suspend' increments the task's suspend count and
stops all threads in the task. As long as the suspend count is
positive newly created threads will not run. This call does not
return until all threads are suspended.
The count may become greater than one, with the effect that it
will take more than one resume call to restart the task.
The function returns `KERN_SUCCESS' if the task has been suspended
and `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
-- Function: kern_return_t task_resume (task_t TARGET_TASK)
The function `task_resume' decrements the task's suspend count. If
it becomes zero, all threads with zero suspend counts in the task
are resumed. The count may not become negative.
The function returns `KERN_SUCCESS' if the task has been resumed,
`KERN_FAILURE' if the suspend count is already at zero and
`KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
-- Function: kern_return_t task_priority (task_t TASK, int PRIORITY,
boolean_t CHANGE_THREADS)
The priority of a task is used only for creation of new threads; a
new thread's priority is set to the enclosing task's priority.
`task_priority' changes this task priority. It also sets the
priorities of all threads in the task to this new priority if
CHANGE_THREADS is `TRUE'. Existing threads are not affected
otherwise. If this priority change violates the maximum priority
of some threads, as many threads as possible will be changed and
an error code will be returned.
The function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if TASK is not a task, or PRIORITY is not
a valid priority and `KERN_FAILURE' if CHANGE_THREADS was `TRUE'
and the attempt to change the priority of at least one existing
thread failed because the new priority would have exceeded that
thread's maximum priority.
-- Function: kern_return_t task_ras_control (task_t TARGET_TASK,
vm_address_t START_PC, vm_address_t END_PC, int FLAVOR)
The function `task_ras_control' manipulates a task's set of
restartable atomic sequences. If a sequence is installed, and any
thread in the task is preempted within the range
[START_PC,END_PC], then the thread is resumed at START_PC. This
enables applications to build atomic sequences which, when
executed to completion, will have executed atomically.
Restartable atomic sequences are intended to be used on systems
that do not have hardware support for low-overhead atomic
primitives.
As a thread can be rolled-back, the code in the sequence should
have no side effects other than a final store at END_PC. The
kernel does not guarantee that the sequence is restartable. It
assumes the application knows what it's doing.
A task may have a finite number of atomic sequences that is
defined at compile time.
The flavor specifices the particular operation that should be
applied to this restartable atomic sequence. Possible values for
flavor can be:
`TASK_RAS_CONTROL_PURGE_ALL'
Remove all registered sequences for this task.
`TASK_RAS_CONTROL_PURGE_ONE'
Remove the named registered sequence for this task.
`TASK_RAS_CONTROL_PURGE_ALL_AND_INSTALL_ONE'
Atomically remove all registered sequences and install the
named sequence.
`TASK_RAS_CONTROL_INSTALL_ONE'
Install this sequence.
The function returns `KERN_SUCCESS' if the operation has been
performed, `KERN_INVALID_ADDRESS' if the START_PC or END_PC values
are not a valid address for the requested operation (for example,
it is invalid to purge a sequence that has not been registered),
`KERN_RESOURCE_SHORTAGE' if an attempt was made to install more
restartable atomic sequences for a task than can be supported by
the kernel, `KERN_INVALID_VALUE' if a bad flavor was specified,
`KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task and
`KERN_FAILURE' if the call is not not supported on this
configuration.
File: mach.info, Node: Task Special Ports, Next: Syscall Emulation, Prev: Task Execution, Up: Task Interface
7.2.5 Task Special Ports
------------------------
-- Function: kern_return_t task_get_special_port (task_t TASK,
int WHICH_PORT, mach_port_t *SPECIAL_PORT)
The function `task_get_special_port' returns send rights to one of
a set of special ports for the task specified by TASK.
The special ports associated with a task are the kernel port
(`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT')
and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap
port is a port to which a task may send a message requesting other
system service ports. This port is not used by the kernel. The
task's exception port is the port to which messages are sent by
the kernel when an exception occurs and the thread causing the
exception has no exception port of its own.
The following macros to call `task_get_special_port' for a specific
port are defined in `mach/task_special_ports.h':
`task_get_exception_port' and `task_get_bootstrap_port'.
The function returns `KERN_SUCCESS' if the port was returned and
`KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an
invalid port selector.
-- Function: kern_return_t task_get_kernel_port (task_t TASK,
mach_port_t *KERNEL_PORT)
The function `task_get_kernel_port' is equivalent to the function
`task_get_special_port' with the WHICH_PORT argument set to
`TASK_KERNEL_PORT'.
-- Function: kern_return_t task_get_exception_port (task_t TASK,
mach_port_t *EXCEPTION_PORT)
The function `task_get_exception_port' is equivalent to the
function `task_get_special_port' with the WHICH_PORT argument set
to `TASK_EXCEPTION_PORT'.
-- Function: kern_return_t task_get_bootstrap_port (task_t TASK,
mach_port_t *BOOTSTRAP_PORT)
The function `task_get_bootstrap_port' is equivalent to the
function `task_get_special_port' with the WHICH_PORT argument set
to `TASK_BOOTSTRAP_PORT'.
-- Function: kern_return_t task_set_special_port (task_t TASK,
int WHICH_PORT, mach_port_t SPECIAL_PORT)
The function `thread_set_special_port' sets one of a set of special
ports for the task specified by TASK.
The special ports associated with a task are the kernel port
(`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT')
and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap
port is a port to which a thread may send a message requesting
other system service ports. This port is not used by the kernel.
The task's exception port is the port to which messages are sent
by the kernel when an exception occurs and the thread causing the
exception has no exception port of its own.
The function returns `KERN_SUCCESS' if the port was set and
`KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an
invalid port selector.
-- Function: kern_return_t task_set_kernel_port (task_t TASK,
mach_port_t KERNEL_PORT)
The function `task_set_kernel_port' is equivalent to the function
`task_set_special_port' with the WHICH_PORT argument set to
`TASK_KERNEL_PORT'.
-- Function: kern_return_t task_set_exception_port (task_t TASK,
mach_port_t EXCEPTION_PORT)
The function `task_set_exception_port' is equivalent to the
function `task_set_special_port' with the WHICH_PORT argument set
to `TASK_EXCEPTION_PORT'.
-- Function: kern_return_t task_set_bootstrap_port (task_t TASK,
mach_port_t BOOTSTRAP_PORT)
The function `task_set_bootstrap_port' is equivalent to the
function `task_set_special_port' with the WHICH_PORT argument set
to `TASK_BOOTSTRAP_PORT'.
File: mach.info, Node: Syscall Emulation, Prev: Task Special Ports, Up: Task Interface
7.2.6 Syscall Emulation
-----------------------
-- Function: kern_return_t task_get_emulation_vector (task_t TASK,
int *VECTOR_START, emulation_vector_t *EMULATION_VECTOR,
mach_msg_type_number_t *EMULATION_VECTOR_COUNT)
The function `task_get_emulation_vector' gets the user-level
handler entry points for all emulated system calls.
-- Function: kern_return_t task_set_emulation_vector (task_t TASK,
int VECTOR_START, emulation_vector_t EMULATION_VECTOR,
mach_msg_type_number_t EMULATION_VECTOR_COUNT)
The function `task_set_emulation_vector' establishes user-level
handlers for the specified system calls. Non-emulated system
calls are specified with an entry of `EML_ROUTINE_NULL'. System
call emulation handlers are inherited by the childs of TASK.
-- Function: kern_return_t task_set_emulation (task_t TASK,
vm_address_t ROUTINE_ENTRY_PT, int ROUTINE_NUMBER)
The function `task_set_emulation' establishes a user-level handler
for the specified system call. System call emulation handlers are
inherited by the childs of TASK.
File: mach.info, Node: Profiling, Prev: Task Interface, Up: Threads and Tasks
7.3 Profiling
=============
-- Function: kern_return_t task_enable_pc_sampling (task_t TASK,
int *TICKS, sampled_pc_flavor_t FLAVOR)
-- Function: kern_return_t thread_enable_pc_sampling (thread_t THREAD,
int *TICKS, sampled_pc_flavor_t FLAVOR)
The function `task_enable_pc_sampling' enables PC sampling for
TASK, the function `thread_enable_pc_sampling' enables PC sampling
for THREAD. The kernel's idea of clock granularity is returned in
TICKS in usecs. (this value should not be trusted). The sampling
flavor is specified by FLAVOR.
The function returns `KERN_SUCCESS' if the operation is completed
successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid
thread.
-- Function: kern_return_t task_disable_pc_sampling (task_t TASK,
int *SAMPLE_COUNT)
-- Function: kern_return_t thread_disable_pc_sampling
(thread_t THREAD, int *SAMPLE_COUNT)
The function `task_disable_pc_sampling' disables PC sampling for
TASK, the function `thread_disable_pc_sampling' disables PC
sampling for THREAD. The number of sample elements in the kernel
for the thread is returned in SAMPLE_COUNT.
The function returns `KERN_SUCCESS' if the operation is completed
successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid
thread.
-- Function: kern_return_t task_get_sampled_pcs (task_t TASK,
sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS,
mach_msg_type_number_t *SAMPLE_COUNT)
-- Function: kern_return_t thread_get_sampled_pcs (thread_t THREAD,
sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS,
int *SAMPLE_COUNT)
The function `task_get_sampled_pcs' extracts the PC samples for
TASK, the function `thread_get_sampled_pcs' extracts the PC
samples for THREAD. SEQNO is the sequence number of the sampled
PCs. This is useful for determining when a collector thread has
missed a sample. The sampled PCs for the thread are returned in
SAMPLED_PCS. SAMPLE_COUNT contains the number of sample elements
returned.
The function returns `KERN_SUCCESS' if the operation is completed
successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a valid
thread and `KERN_FAILURE' if THREAD is not sampled.
-- Data type: sampled_pc_t
This structure is returned in SAMPLED_PCS by the
`thread_get_sampled_pcs' and `task_get_sampled_pcs' functions and
provides pc samples for threads or tasks. It has the following
members:
`natural_t id'
A thread-specific unique identifier.
`vm_offset_t pc'
A pc value.
`sampled_pc_flavor_t sampletype'
The type of the sample as per flavor.
-- Data type: sampled_pc_flavor_t
This data type specifies a pc sample flavor, either as argument
passed in FLAVOR to the `thread_enable_pc_sample' and
`thread_disable_pc_sample' functions, or as member `sampletype' in
the `sample_pc_t' data type. The flavor is a bitwise-or of the
possible flavors defined in `mach/pc_sample.h':
`SAMPLED_PC_PERIODIC'
default
`SAMPLED_PC_VM_ZFILL_FAULTS'
zero filled fault
`SAMPLED_PC_VM_REACTIVATION_FAULTS'
reactivation fault
`SAMPLED_PC_VM_PAGEIN_FAULTS'
pagein fault
`SAMPLED_PC_VM_COW_FAULTS'
copy-on-write fault
`SAMPLED_PC_VM_FAULTS_ANY'
any fault
`SAMPLED_PC_VM_FAULTS'
the bitwise-or of `SAMPLED_PC_VM_ZFILL_FAULTS',
`SAMPLED_PC_VM_REACTIVATION_FAULTS',
`SAMPLED_PC_VM_PAGEIN_FAULTS' and `SAMPLED_PC_VM_COW_FAULTS'.
File: mach.info, Node: Host Interface, Next: Processors and Processor Sets, Prev: Threads and Tasks, Up: Top
8 Host Interface
****************
This section describes the Mach interface to a host executing a Mach
kernel. The interface allows to query statistics about a host and
control its behaviour.
A host is represented by two ports, a name port HOST used to query
information about the host accessible to everyone, and a control port
HOST_PRIV used to manipulate it. For example, you can query the
current time using the name port, but to change the time you need to
send a message to the host control port.
Everything described in this section is declared in the header file
`mach.h'.
* Menu:
* Host Ports:: Ports representing a host.
* Host Information:: Retrieval of information about a host.
* Host Time:: Operations on the time as seen by a host.
* Host Reboot:: Rebooting the system.
File: mach.info, Node: Host Ports, Next: Host Information, Up: Host Interface
8.1 Host Ports
==============
-- Data type: host_t
This is a `mach_port_t' and used to hold the port name of a host
name port (or short: host port). Any task can get a send right to
the name port of the host running the task using the
`mach_host_self' system call. The name port can be used query
information about the host, for example the current time.
-- Function: host_t mach_host_self ()
The `mach_host_self' system call returns the calling thread's host
name port. It has an effect equivalent to receiving a send right
for the host port. `mach_host_self' returns the name of the send
right. In particular, successive calls will increase the calling
task's user-reference count for the send right.
As a special exception, the kernel will overrun the user reference
count of the host name port, so that this function can not fail
for that reason. Because of this, the user should not deallocate
the port right if an overrun might have happened. Otherwise the
reference count could drop to zero and the send right be destroyed
while the user still expects to be able to use it. As the kernel
does not make use of the number of extant send rights anyway, this
is safe to do (the host port itself is never destroyed).
The function returns `MACH_PORT_NULL' if a resource shortage
prevented the reception of the send right.
This function is also available in `mach/mach_traps.h'.
-- Data type: host_priv_t
This is a `mach_port_t' and used to hold the port name of a
privileged host control port. A send right to the host control
port is inserted into the first task at bootstrap (*note
Modules::). This is the only way to get access to the host
control port in Mach, so the initial task has to preserve the send
right carefully, moving a copy of it to other privileged tasks if
necessary and denying access to unprivileged tasks.
File: mach.info, Node: Host Information, Next: Host Time, Prev: Host Ports, Up: Host Interface
8.2 Host Information
====================
-- Function: kern_return_t host_info (host_t HOST, int FLAVOR,
host_info_t HOST_INFO,
mach_msg_type_number_t *HOST_INFO_COUNT)
The `host_info' function returns various information about HOST.
HOST_INFO is an array of integers that is supplied by the caller.
It will be filled with the requested information. HOST_INFO_COUNT
is supplied as the maximum number of integers in HOST_INFO. On
return, it contains the actual number of integers in HOST_INFO.
The maximum number of integers returned by any flavor is
`HOST_INFO_MAX'.
The type of information returned is defined by FLAVOR, which can
be one of the following:
`HOST_BASIC_INFO'
The function returns basic information about the host, as
defined by `host_basic_info_t'. This includes the number of
processors, their type, and the amount of memory installed in
the system. The number of integers returned is
`HOST_BASIC_INFO_COUNT'. For how to get more information
about the processor, see *Note Processor Interface::.
`HOST_PROCESSOR_SLOTS'
The function returns the numbers of the slots with active
processors in them. The number of integers returned can be
up to `max_cpus', as returned by the `HOST_BASIC_INFO' flavor
of `host_info'.
`HOST_SCHED_INFO'
The function returns information of interest to schedulers as
defined by `host_sched_info_t'. The number of integers
returned is `HOST_SCHED_INFO_COUNT'.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if HOST is not a host or FLAVOR is not
recognized. The function returns `MIG_ARRAY_TOO_LARGE' if the
returned info array is too large for HOST_INFO. In this case,
HOST_INFO is filled as much as possible and HOST_INFO_COUNT is set
to the number of elements that would be returned if there were
enough room.
-- Data type: struct host_basic_info
A pointer to this structure is returned in HOST_INFO by the
`host_info' function and provides basic information about the host.
You can cast a variable of type `host_info_t' to a pointer of this
type if you provided it as the HOST_INFO parameter for the
`HOST_BASIC_INFO' flavor of `host_info'. It has the following
members:
`int max_cpus'
The maximum number of possible processors for which the
kernel is configured.
`int avail_cpus'
The number of cpus currently available.
`vm_size_t memory_size'
The size of physical memory in bytes.
`cpu_type_t cpu_type'
The type of the master processor.
`cpu_subtype_t cpu_subtype'
The subtype of the master processor.
The type and subtype of the individual processors are also
available by `processor_info', see *Note Processor Interface::.
-- Data type: host_basic_info_t
This is a pointer to a `struct host_basic_info'.
-- Data type: struct host_sched_info
A pointer to this structure is returned in HOST_INFO by the
`host_info' function and provides information of interest to
schedulers. You can cast a variable of type `host_info_t' to a
pointer of this type if you provided it as the HOST_INFO parameter
for the `HOST_SCHED_INFO' flavor of `host_info'. It has the
following members:
`int min_timeout'
The minimum timeout and unit of time in milliseconds.
`int min_quantum'
The minimum quantum and unit of quantum in milliseconds.
-- Data type: host_sched_info_t
This is a pointer to a `struct host_sched_info'.
-- Function: kern_return_t host_kernel_version (host_t HOST,
kernel_version_t *VERSION)
The `host_kernel_version' function returns the version string
compiled into the kernel executing on HOST at the time it was
built in the character string VERSION. This string describes the
version of the kernel. The constant `KERNEL_VERSION_MAX' should be
used to dimension storage for the returned string if the
`kernel_version_t' declaration is not used.
If the version string compiled into the kernel is longer than
`KERNEL_VERSION_MAX', the result is truncated and not necessarily
null-terminated.
If HOST is not a valid send right to a host port, the function
returns `KERN_INVALID_ARGUMENT'. If VERSION points to
inaccessible memory, it returns `KERN_INVALID_ADDRESS', and
`KERN_SUCCESS' otherwise.
-- Function: kern_return_t host_get_boot_info (host_priv_t HOST_PRIV,
kernel_boot_info_t BOOT_INFO)
The `host_get_boot_info' function returns the boot-time information
string supplied by the operator to the kernel executing on
HOST_PRIV in the character string BOOT_INFO. The constant
`KERNEL_BOOT_INFO_MAX' should be used to dimension storage for the
returned string if the `kernel_boot_info_t' declaration is not
used.
If the boot-time information string supplied by the operator is
longer than `KERNEL_BOOT_INFO_MAX', the result is truncated and not
necessarily null-terminated.
File: mach.info, Node: Host Time, Next: Host Reboot, Prev: Host Information, Up: Host Interface
8.3 Host Time
=============
-- Data type: time_value_t
This is the representation of a time in Mach. It is a `struct
time_value' and consists of the following members:
`integer_t seconds'
The number of seconds.
`integer_t microseconds'
The number of microseconds.
The number of microseconds should always be smaller than
`TIME_MICROS_MAX' (100000). A time with this property is "normalized".
Normalized time values can be manipulated with the following macros:
-- Macro: time_value_add_usec (time_value_t *VAL, integer_t *MICROS)
Add MICROS microseconds to VAL. If VAL is normalized and MICROS
smaller than `TIME_MICROS_MAX', VAL will be normalized afterwards.
-- Macro: time_value_add (time_value_t *RESULT, time_value_t *ADDEND)
Add the values in ADDEND to RESULT. If both are normalized,
RESULT will be normalized afterwards.
A variable of type `time_value_t' can either represent a duration or
a fixed point in time. In the latter case, it shall be interpreted as
the number of seconds and microseconds after the epoch 1. Jan 1970.
-- Function: kern_return_t host_get_time (host_t HOST,
time_value_t *CURRENT_TIME)
Get the current time as seen by HOST. On success, the time passed
since the epoch is returned in CURRENT_TIME.
-- Function: kern_return_t host_set_time (host_priv_t HOST_PRIV,
time_value_t NEW_TIME)
Set the time of HOST_PRIV to NEW_TIME.
-- Function: kern_return_t host_adjust_time (host_priv_t HOST_PRIV,
time_value_t NEW_ADJUSTMENT, time_value_t *OLD_ADJUSTMENT)
Arrange for the current time as seen by HOST_PRIV to be gradually
changed by the adjustment value NEW_ADJUSTMENT, and return the old
adjustment value in OLD_ADJUSTMENT.
For efficiency, the current time is available through a mapped-time
interface.
-- Data type: mapped_time_value_t
This structure defines the mapped-time interface. It has the
following members:
`integer_t seconds'
The number of seconds.
`integer_t microseconds'
The number of microseconds.
`integer_t check_seconds'
This is a copy of the seconds value, which must be checked to
protect against a race condition when reading out the two
time values.
Here is an example how to read out the current time using the
mapped-time interface:
do
{
secs = mtime->seconds;
usecs = mtime->microseconds;
}
while (secs != mtime->check_seconds);
File: mach.info, Node: Host Reboot, Prev: Host Time, Up: Host Interface
8.4 Host Reboot
===============
-- Function: kern_return_t host_reboot (host_priv_t HOST_PRIV,
int OPTIONS)
Reboot the host specified by HOST_PRIV. The argument OPTIONS
specifies the flags. The available flags are defined in
`sys/reboot.h':
`RB_HALT'
Do not reboot, but halt the machine.
`RB_DEBUGGER'
Do not reboot, but enter kernel debugger from user space.
If successful, the function might not return.
File: mach.info, Node: Processors and Processor Sets, Next: Device Interface, Prev: Host Interface, Up: Top
9 Processors and Processor Sets
*******************************
This section describes the Mach interface to processor sets and
individual processors. The interface allows to group processors into
sets and control the processors and processor sets.
A processor is not a central part of the interface. It is mostly of
relevance as a part of a processor set. Threads are always assigned to
processor sets, and all processors in a set are equally involved in
executing all threads assigned to that set.
The processor set is represented by two ports, a name port
PROCESSOR_SET_NAME used to query information about the host accessible
to everyone, and a control port PROCESSOR_SET used to manipulate it.
* Menu:
* Processor Set Interface:: How to work with processor sets.
* Processor Interface:: How to work with individual processors.
File: mach.info, Node: Processor Set Interface, Next: Processor Interface, Up: Processors and Processor Sets
9.1 Processor Set Interface
===========================
* Menu:
* Processor Set Ports:: Ports representing a processor set.
* Processor Set Access:: How the processor sets are accessed.
* Processor Set Creation:: How new processor sets are created.
* Processor Set Destruction:: How processor sets are destroyed.
* Tasks and Threads on Sets:: Assigning tasks, threads to processor sets.
* Processor Set Priority:: Specifying the priority of a processor set.
* Processor Set Policy:: Changing the processor set policies.
* Processor Set Info:: Obtaining information about a processor set.
File: mach.info, Node: Processor Set Ports, Next: Processor Set Access, Up: Processor Set Interface
9.1.1 Processor Set Ports
-------------------------
-- Data type: processor_set_name_t
This is a `mach_port_t' and used to hold the port name of a
processor set name port that names the processor set. Any task
can get a send right to name port of a processor set. The
processor set name port allows to get information about the
processor set.
-- Data type: processor_set_t
This is a `mach_port_t' and used to hold the port name of a
privileged processor set control port that represents the
processor set. Operations on the processor set are implemented as
remote procedure calls to the processor set port. The processor
set port allows to manipulate the processor set.
File: mach.info, Node: Processor Set Access, Next: Processor Set Creation, Prev: Processor Set Ports, Up: Processor Set Interface
9.1.2 Processor Set Access
--------------------------
-- Function: kern_return_t host_processor_sets (host_t HOST,
processor_set_name_array_t *PROCESSOR_SETS,
mach_msg_type_number_t *PROCESSOR_SETS_COUNT)
The function `host_processor_sets' gets send rights to the name
port for each processor set currently assigned to HOST.
`host_processor_set_priv' can be used to obtain the control ports
from these if desired. PROCESSOR_SETS is an array that is created
as a result of this call. The caller may wish to `vm_deallocate'
this array when the data is no longer needed.
PROCESSOR_SETS_COUNT is set to the number of processor sets in the
PROCESSOR_SETS.
This function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if HOST is not a host.
-- Function: kern_return_t host_processor_set_priv
(host_priv_t HOST_PRIV, processor_set_name_t SET_NAME,
processor_set_t *SET)
The function `host_processor_set_priv' allows a privileged
application to obtain the control port SET for an existing
processor set from its name port SET_NAME. The privileged host
port HOST_PRIV is required.
This function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if HOST_PRIV is not a valid host control
port.
-- Function: kern_return_t processor_set_default (host_t HOST,
processor_set_name_t *DEFAULT_SET)
The function `processor_set_default' returns the default processor
set of HOST in DEFAULT_SET. The default processor set is used by
all threads, tasks, and processors that are not explicitly
assigned to other sets. processor_set_default returns a port that
can be used to obtain information about this set (e.g. how many
threads are assigned to it). This port cannot be used to perform
operations on that set.
This function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if HOST is not a host and
`KERN_INVALID_ADDRESS' if DEFAULT_SET points to inaccessible
memory.
File: mach.info, Node: Processor Set Creation, Next: Processor Set Destruction, Prev: Processor Set Access, Up: Processor Set Interface
9.1.3 Processor Set Creation
----------------------------
-- Function: kern_return_t processor_set_create (host_t HOST,
processor_set_t *NEW_SET, processor_set_name_t *NEW_NAME)
The function `processor_set_create' creates a new processor set on
HOST and returns the two ports associated with it. The port
returned in NEW_SET is the actual port representing the set. It
is used to perform operations such as assigning processors, tasks,
or threads. The port returned in NEW_NAME identifies the set, and
is used to obtain information about the set.
This function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if HOST is not a host,
`KERN_INVALID_ADDRESS' if NEW_SET or NEW_NAME points to
inaccessible memory and `KERN_FAILURE' is the operating system does
not support processor allocation.
File: mach.info, Node: Processor Set Destruction, Next: Tasks and Threads on Sets, Prev: Processor Set Creation, Up: Processor Set Interface
9.1.4 Processor Set Destruction
-------------------------------
-- Function: kern_return_t processor_set_destroy
(processor_set_t PROCESSOR_SET)
The function `processor_set_destroy' destroys the specified
processor set. Any assigned processors, tasks, or threads are
reassigned to the default set. The object port for the processor
set is required (not the name port). The default processor set
cannot be destroyed.
This function returns `KERN_SUCCESS' if the set was destroyed,
`KERN_FAILURE' if an attempt was made to destroy the default
processor set, or the operating system does not support processor
allocation, and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a
valid processor set control port.
File: mach.info, Node: Tasks and Threads on Sets, Next: Processor Set Priority, Prev: Processor Set Destruction, Up: Processor Set Interface
9.1.5 Tasks and Threads on Sets
-------------------------------
-- Function: kern_return_t processor_set_tasks
(processor_set_t PROCESSOR_SET, task_array_t *TASK_LIST,
mach_msg_type_number_t *TASK_COUNT)
The function `processor_set_tasks' gets send rights to the kernel
port for each task currently assigned to PROCESSOR_SET.
TASK_LIST is an array that is created as a result of this call.
The caller may wish to `vm_deallocate' this array when the data is
no longer needed. TASK_COUNT is set to the number of tasks in the
TASK_LIST.
This function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set.
-- Function: kern_return_t processor_set_threads
(processor_set_t PROCESSOR_SET, thread_array_t *THREAD_LIST,
mach_msg_type_number_t *THREAD_COUNT)
The function `processor_set_thread' gets send rights to the kernel
port for each thread currently assigned to PROCESSOR_SET.
THREAD_LIST is an array that is created as a result of this call.
The caller may wish to `vm_deallocate' this array when the data is
no longer needed. THREAD_COUNT is set to the number of threads in
the THREAD_LIST.
This function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set.
-- Function: kern_return_t task_assign (task_t TASK,
processor_set_t PROCESSOR_SET, boolean_t ASSIGN_THREADS)
The function `task_assign' assigns TASK the set PROCESSOR_SET.
This assignment is for the purposes of determining the initial
assignment of newly created threads in task. Any previous
assignment of the task is nullified. Existing threads within the
task are also reassigned if ASSIGN_THREADS is `TRUE'. They are
not affected if it is `FALSE'.
This function returns `KERN_SUCCESS' if the assignment has been
performed and `KERN_INVALID_ARGUMENT' if TASK is not a task, or
PROCESSOR_SET is not a processor set on the same host as TASK.
-- Function: kern_return_t task_assign_default (task_t TASK,
boolean_t ASSIGN_THREADS)
The function `task_assign_default' is a variant of `task_assign'
that assigns the task to the default processor set on that task's
host. This variant exists because the control port for the
default processor set is privileged and not ususally available to
users.
This function returns `KERN_SUCCESS' if the assignment has been
performed and `KERN_INVALID_ARGUMENT' if TASK is not a task.
-- Function: kern_return_t task_get_assignment (task_t TASK,
processor_set_name_t *ASSIGNED_SET)
The function `task_get_assignment' returns the name of the
processor set to which the thread is currently assigned in
ASSIGNED_SET. This port can only be used to obtain information
about the processor set.
This function returns `KERN_SUCCESS' if the assignment has been
performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to
inaccessible memory, and `KERN_INVALID_ARGUMENT' if TASK is not a
task.
-- Function: kern_return_t thread_assign (thread_t THREAD,
processor_set_t PROCESSOR_SET)
The function `thread_assign' assigns THREAD the set PROCESSOR_SET.
After the assignment is completed, the thread only executes on
processors assigned to the designated processor set. If there are
no such processors, then the thread is unable to execute. Any
previous assignment of the thread is nullified. Unix system call
compatibility code may temporarily force threads to execute on the
master processor.
This function returns `KERN_SUCCESS' if the assignment has been
performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread,
or PROCESSOR_SET is not a processor set on the same host as THREAD.
-- Function: kern_return_t thread_assign_default (thread_t THREAD)
The function `thread_assign_default' is a variant of
`thread_assign' that assigns the thread to the default processor
set on that thread's host. This variant exists because the
control port for the default processor set is privileged and not
ususally available to users.
This function returns `KERN_SUCCESS' if the assignment has been
performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread.
-- Function: kern_return_t thread_get_assignment (thread_t THREAD,
processor_set_name_t *ASSIGNED_SET)
The function `thread_get_assignment' returns the name of the
processor set to which the thread is currently assigned in
ASSIGNED_SET. This port can only be used to obtain information
about the processor set.
This function returns `KERN_SUCCESS' if the assignment has been
performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to
inaccessible memory, and `KERN_INVALID_ARGUMENT' if THREAD is not
a thread.
File: mach.info, Node: Processor Set Priority, Next: Processor Set Policy, Prev: Tasks and Threads on Sets, Up: Processor Set Interface
9.1.6 Processor Set Priority
----------------------------
-- Function: kern_return_t processor_set_max_priority
(processor_set_t PROCESSOR_SET, int MAX_PRIORITY,
boolean_t CHANGE_THREADS)
The function `processor_set_max_priority' is used to set the
maximum priority for a processor set. The priority of a processor
set is used only for newly created threads (thread's maximum
priority is set to processor set's) and the assignment of threads
to the set (thread's maximum priority is reduced if it exceeds the
set's maximum priority, thread's priority is similarly reduced).
`processor_set_max_priority' changes this priority. It also sets
the maximum priority of all threads assigned to the processor set
to this new priority if CHANGE_THREADS is `TRUE'. If this maximum
priority is less than the priorities of any of these threads,
their priorities will also be set to this new value.
This function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or
PRIORITY is not a valid priority.
File: mach.info, Node: Processor Set Policy, Next: Processor Set Info, Prev: Processor Set Priority, Up: Processor Set Interface
9.1.7 Processor Set Policy
--------------------------
-- Function: kern_return_t processor_set_policy_enable
(processor_set_t PROCESSOR_SET, int POLICY)
-- Function: kern_return_t processor_set_policy_disable
(processor_set_t PROCESSOR_SET, int POLICY,
boolean_t CHANGE_THREADS)
Processor sets may restrict the scheduling policies to be used for
threads assigned to them. These two calls provide the mechanism
for designating permitted and forbidden policies. The current set
of permitted policies can be obtained from `processor_set_info'.
Timesharing may not be forbidden by any processor set. This is a
compromise to reduce the complexity of the assign operation; any
thread whose policy is forbidden by the target processor set has
its policy reset to timesharing. If the CHANGE_THREADS argument to
`processor_set_policy_disable' is true, threads currently assigned
to this processor set and using the newly disabled policy will have
their policy reset to timesharing.
`mach/policy.h' contains the allowed policies; it is included by
`mach.h'. Not all policies (e.g. fixed priority) are supported by
all systems.
This function returns `KERN_SUCCESS' if the operation was completed
successfully and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a
processor set or POLICY is not a valid policy, or an attempt was
made to disable timesharing.
File: mach.info, Node: Processor Set Info, Prev: Processor Set Policy, Up: Processor Set Interface
9.1.8 Processor Set Info
------------------------
-- Function: kern_return_t processor_set_info
(processor_set_name_t SET_NAME, int FLAVOR, host_t *HOST,
processor_set_info_t PROCESSOR_SET_INFO,
mach_msg_type_number_t *PROCESSOR_SET_INFO_COUNT)
The function `processor_set_info' returns the selected information
array for a processor set, as specified by FLAVOR.
HOST is set to the host on which the processor set resides. This
is the non-privileged host port.
PROCESSOR_SET_INFO is an array of integers that is supplied by the
caller and returned filled with specified information.
PROCESSOR_SET_INFO_COUNT is supplied as the maximum number of
integers in PROCESSOR_SET_INFO. On return, it contains the actual
number of integers in PROCESSOR_SET_INFO. The maximum number of
integers returned by any flavor is `PROCESSOR_SET_INFO_MAX'.
The type of information returned is defined by FLAVOR, which can
be one of the following:
`PROCESSOR_SET_BASIC_INFO'
The function returns basic information about the processor
set, as defined by `processor_set_basic_info_t'. This
includes the number of tasks and threads assigned to the
processor set. The number of integers returned is
`PROCESSOR_SET_BASIC_INFO_COUNT'.
`PROCESSOR_SET_SCHED_INFO'
The function returns information about the schduling policy
for the processor set as defined by
`processor_set_sched_info_t'. The number of integers
returned is `PROCESSOR_SET_SCHED_INFO_COUNT'.
Some machines may define additional (machine-dependent) flavors.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or
FLAVOR is not recognized. The function returns
`MIG_ARRAY_TOO_LARGE' if the returned info array is too large for
PROCESSOR_SET_INFO. In this case, PROCESSOR_SET_INFO is filled as
much as possible and PROCESSOR_SET_INFO_COUNT is set to the number
of elements that would have been returned if there were enough
room.
-- Data type: struct processor_set_basic_info
This structure is returned in PROCESSOR_SET_INFO by the
`processor_set_info' function and provides basic information about
the processor set. You can cast a variable of type
`processor_set_info_t' to a pointer of this type if you provided it
as the PROCESSOR_SET_INFO parameter for the
`PROCESSOR_SET_BASIC_INFO' flavor of `processor_set_info'. It has
the following members:
`int processor_count'
number of processors
`int task_count'
number of tasks
`int thread_count'
number of threads
`int load_average'
scaled load average
`int mach_factor'
scaled mach factor
-- Data type: processor_set_basic_info_t
This is a pointer to a `struct processor_set_basic_info'.
-- Data type: struct processor_set_sched_info
This structure is returned in PROCESSOR_SET_INFO by the
`processor_set_info' function and provides schedule information
about the processor set. You can cast a variable of type
`processor_set_info_t' to a pointer of this type if you provided it
as the PROCESSOR_SET_INFO parameter for the
`PROCESSOR_SET_SCHED_INFO' flavor of `processor_set_info'. It has
the following members:
`int policies'
allowed policies
`int max_priority'
max priority for new threads
-- Data type: processor_set_sched_info_t
This is a pointer to a `struct processor_set_sched_info'.
File: mach.info, Node: Processor Interface, Prev: Processor Set Interface, Up: Processors and Processor Sets
9.2 Processor Interface
=======================
-- Data type: processor_t
This is a `mach_port_t' and used to hold the port name of a
processor port that represents the processor. Operations on the
processor are implemented as remote procedure calls to the
processor port.
* Menu:
* Hosted Processors:: Getting a list of all processors on a host.
* Processor Control:: Starting, stopping, controlling processors.
* Processors and Sets:: Combining processors into processor sets.
* Processor Info:: Obtaining information on processors.
File: mach.info, Node: Hosted Processors, Next: Processor Control, Up: Processor Interface
9.2.1 Hosted Processors
-----------------------
-- Function: kern_return_t host_processors (host_priv_t HOST_PRIV,
processor_array_t *PROCESSOR_LIST,
mach_msg_type_number_t *PROCESSOR_COUNT)
The function `host_processors' gets send rights to the processor
port for each processor existing on HOST_PRIV. This is the
privileged port that allows its holder to control a processor.
PROCESSOR_LIST is an array that is created as a result of this
call. The caller may wish to `vm_deallocate' this array when the
data is no longer needed. PROCESSOR_COUNT is set to the number of
processors in the PROCESSOR_LIST.
This function returns `KERN_SUCCESS' if the call succeeded,
`KERN_INVALID_ARGUMENT' if HOST_PRIV is not a privileged host
port, and `KERN_INVALID_ADDRESS' if PROCESSOR_COUNT points to
inaccessible memory.
File: mach.info, Node: Processor Control, Next: Processors and Sets, Prev: Hosted Processors, Up: Processor Interface
9.2.2 Processor Control
-----------------------
-- Function: kern_return_t processor_start (processor_t PROCESSOR)
-- Function: kern_return_t processor_exit (processor_t PROCESSOR)
-- Function: kern_return_t processor_control (processor_t PROCESSOR,
processor_info_t *CMD, mach_msg_type_number_t COUNT)
Some multiprocessors may allow privileged software to control
processors. The `processor_start', `processor_exit', and
`processor_control' operations implement this. The interpretation
of the command in CMD is machine dependent. A newly started
processor is assigned to the default processor set. An exited
processor is removed from the processor set to which it was
assigned and ceases to be active.
COUNT contains the length of the command CMD as a number of ints.
Availability limited. All of these operations are
machine-dependent. They may do nothing. The ability to restart
an exited processor is also machine-dependent.
This function returns `KERN_SUCCESS' if the operation was
performed, `KERN_FAILURE' if the operation was not performed (a
likely reason is that it is not supported on this processor),
`KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor, and
`KERN_INVALID_ADDRESS' if CMD points to inaccessible memory.
File: mach.info, Node: Processors and Sets, Next: Processor Info, Prev: Processor Control, Up: Processor Interface
9.2.3 Processors and Sets
-------------------------
-- Function: kern_return_t processor_assign (processor_t PROCESSOR,
processor_set_t PROCESSOR_SET, boolean_t WAIT)
The function `processor_assign' assigns PROCESSOR to the the set
PROCESSOR_SET. After the assignment is completed, the processor
only executes threads that are assigned to that processor set.
Any previous assignment of the processor is nullified. The master
processor cannot be reassigned. All processors take clock
interrupts at all times. The WAIT argument indicates whether the
caller should wait for the assignment to be completed or should
return immediately. Dedicated kernel threads are used to perform
processor assignment, so setting wait to `FALSE' allows assignment
requests to be queued and performed faster, especially if the
kernel has more than one dedicated internal thread for processor
assignment. Redirection of other device interrupts away from
processors assigned to other than the default processor set is
machine-dependent. Intermediaries that interpose on ports must be
sure to interpose on both ports involved in this call if they
interpose on either.
This function returns `KERN_SUCCESS' if the assignment has been
performed, `KERN_INVALID_ARGUMENT' if PROCESSOR is not a
processor, or PROCESSOR_SET is not a processor set on the same
host as PROCESSOR.
-- Function: kern_return_t processor_get_assignment
(processor_t PROCESSOR, processor_set_name_t *ASSIGNED_SET)
The function `processor_get_assignment' obtains the current
assignment of a processor. The name port of the processor set is
returned in ASSIGNED_SET.
File: mach.info, Node: Processor Info, Prev: Processors and Sets, Up: Processor Interface
9.2.4 Processor Info
--------------------
-- Function: kern_return_t processor_info (processor_t PROCESSOR,
int FLAVOR, host_t *HOST, processor_info_t PROCESSOR_INFO,
mach_msg_type_number_t *PROCESSOR_INFO_COUNT)
The function `processor_info' returns the selected information
array for a processor, as specified by FLAVOR.
HOST is set to the host on which the processor set resides. This
is the non-privileged host port.
PROCESSOR_INFO is an array of integers that is supplied by the
caller and returned filled with specified information.
PROCESSOR_INFO_COUNT is supplied as the maximum number of integers
in PROCESSOR_INFO. On return, it contains the actual number of
integers in PROCESSOR_INFO. The maximum number of integers
returned by any flavor is `PROCESSOR_INFO_MAX'.
The type of information returned is defined by FLAVOR, which can
be one of the following:
`PROCESSOR_BASIC_INFO'
The function returns basic information about the processor,
as defined by `processor_basic_info_t'. This includes the
slot number of the processor. The number of integers
returned is `PROCESSOR_BASIC_INFO_COUNT'.
Machines which require more configuration information beyond the
slot number are expected to define additional (machine-dependent)
flavors.
The function returns `KERN_SUCCESS' if the call succeeded and
`KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor or FLAVOR
is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
the returned info array is too large for PROCESSOR_INFO. In this
case, PROCESSOR_INFO is filled as much as possible and
PROCESSOR_INFOCNT is set to the number of elements that would have
been returned if there were enough room.
-- Data type: struct processor_basic_info
This structure is returned in PROCESSOR_INFO by the
`processor_info' function and provides basic information about the
processor. You can cast a variable of type `processor_info_t' to a
pointer of this type if you provided it as the PROCESSOR_INFO
parameter for the `PROCESSOR_BASIC_INFO' flavor of
`processor_info'. It has the following members:
`cpu_type_t cpu_type'
cpu type
`cpu_subtype_t cpu_subtype'
cpu subtype
`boolean_t running'
is processor running?
`int slot_num'
slot number
`boolean_t is_master'
is this the master processor
-- Data type: processor_basic_info_t
This is a pointer to a `struct processor_basic_info'.
File: mach.info, Node: Device Interface, Next: Kernel Debugger, Prev: Processors and Processor Sets, Up: Top
10 Device Interface
*******************
The GNU Mach microkernel provides a simple device interface that allows
the user space programs to access the underlying hardware devices. Each
device has a unique name, which is a string up to 127 characters long.
To open a device, the device master port has to be supplied. The device
master port is only available through the bootstrap port. Anyone who
has control over the device master port can use all hardware devices.
-- Data type: device_t
This is a `mach_port_t' and used to hold the port name of a device
port that represents the device. Operations on the device are
implemented as remote procedure calls to the device port. Each
device provides a sequence of records. The length of a record is
specific to the device. Data can be transferred "out-of-line" or
"in-line" (*note Memory::).
All constants and functions in this chapter are defined in
`device/device.h'.
* Menu:
* Device Reply Server:: Handling device reply messages.
* Device Open:: Opening hardware devices.
* Device Close:: Closing hardware devices.
* Device Read:: Reading data from the device.
* Device Write:: Writing data to the device.
* Device Map:: Mapping devices into virtual memory.
* Device Status:: Querying and manipulating a device.
* Device Filter:: Filtering packets arriving on a device.
File: mach.info, Node: Device Reply Server, Next: Device Open, Up: Device Interface
10.1 Device Reply Server
========================
Beside the usual synchronous interface, an asynchronous interface is
provided. For this, the caller has to receive and handle the reply
messages seperately from the function call.
-- Function: boolean_t device_reply_server (msg_header_t *IN_MSG,
msg_header_t *OUT_MSG)
The function `device_reply_server' is produced by the remote
procedure call generator to handle a received message. This
function does all necessary argument handling, and actually calls
one of the following functions: `ds_device_open_reply',
`ds_device_read_reply', `ds_device_read_reply_inband',
`ds_device_write_reply' and `ds_device_write_reply_inband'.
The IN_MSG argument is the message that has been received from the
kernel. The OUT_MSG is a reply message, but this is not used for
this server.
The function returns `TRUE' to indicate that the message in
question was applicable to this interface, and that the appropriate
routine was called to interpret the message. It returns `FALSE' to
indicate that the message did not apply to this interface, and
that no other action was taken.
File: mach.info, Node: Device Open, Next: Device Close, Prev: Device Reply Server, Up: Device Interface
10.2 Device Open
================
-- Function: kern_return_t device_open (mach_port_t MASTER_PORT,
dev_mode_t MODE, dev_name_t NAME, device_t *DEVICE)
The function `device_open' opens the device NAME and returns a
port to it in DEVICE. The open count for the device is
incremented by one. If the open count was 0, the open handler for
the device is invoked.
MASTER_PORT must hold the master device port. NAME specifies the
device to open, and is a string up to 128 characters long. MODE
is the open mode. It is a bitwise-or of the following constants:
`D_READ'
Request read access for the device.
`D_WRITE'
Request write access for the device.
`D_NODELAY'
Do not delay an open.
The function returns `D_SUCCESS' if the device was successfully
opened, `D_INVALID_OPERATION' if MASTER_PORT is not the master
device port, `D_WOULD_BLOCK' is the device is busy and `D_NOWAIT'
was specified in mode, `D_ALREADY_OPEN' if the device is already
open in an incompatible mode and `D_NO_SUCH_DEVICE' if NAME does
not denote a know device.
-- Function: kern_return_t device_open_request
(mach_port_t MASTER_PORT, mach_port_t REPLY_PORT,
dev_mode_t MODE, dev_name_t NAME)
-- Function: kern_return_t ds_device_open_reply
(mach_port_t REPLY_PORT, kern_return_t RETURN,
device_t *DEVICE)
This is the asynchronous form of the `device_open' function.
`device_open_request' performs the open request. The meaning for
the parameters is as in `device_open'. Additionally, the caller
has to supply a reply port to which the `ds_device_open_reply'
message is sent by the kernel when the open has been performed.
The return value of the open operation is stored in RETURN_CODE.
As neither function receives a reply message, only message
transmission errors apply. If no error occurs, `KERN_SUCCESS' is
returned.
File: mach.info, Node: Device Close, Next: Device Read, Prev: Device Open, Up: Device Interface
10.3 Device Close
=================
-- Function: kern_return_t device_close (device_t DEVICE)
The function `device_close' decrements the open count of the device
by one. If the open count drops to zero, the close handler for the
device is called. The device to close is specified by its port
DEVICE.
The function returns `D_SUCCESS' if the device was successfully
closed and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port.
File: mach.info, Node: Device Read, Next: Device Write, Prev: Device Close, Up: Device Interface
10.4 Device Read
================
-- Function: kern_return_t device_read (device_t DEVICE,
dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
io_buf_ptr_t *DATA, mach_msg_type_number_t *DATA_COUNT)
The function `device_read' reads BYTES_WANTED bytes from DEVICE,
and stores them in a buffer allocated with `vm_allocate', which
address is returned in DATA. The caller must deallocated it if it
is no longer needed. The number of bytes actually returned is
stored in DATA_COUNT.
If MODE is `D_NOWAIT', the operation does not block. Otherwise
MODE should be 0. RECNUM is the record number to be read, its
meaning is device specific.
The function returns `D_SUCCESS' if some data was successfully
read, `D_WOULD_BLOCK' if no data is currently available and
`D_NOWAIT' is specified, and `D_NO_SUCH_DEVICE' if DEVICE does not
denote a device port.
-- Function: kern_return_t device_read_inband (device_t DEVICE,
dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT)
The `device_read_inband' function works as the `device_read'
function, except that the data is returned "in-line" in the reply
IPC message (*note Memory::).
-- Function: kern_return_t device_read_request (device_t DEVICE,
mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM,
int BYTES_WANTED)
-- Function: kern_return_t ds_device_read_reply
(mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
This is the asynchronous form of the `device_read' function.
`device_read_request' performs the read request. The meaning for
the parameters is as in `device_read'. Additionally, the caller
has to supply a reply port to which the `ds_device_read_reply'
message is sent by the kernel when the read has been performed.
The return value of the read operation is stored in RETURN_CODE.
As neither function receives a reply message, only message
transmission errors apply. If no error occurs, `KERN_SUCCESS' is
returned.
-- Function: kern_return_t device_read_request_inband
(device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE,
recnum_t RECNUM, int BYTES_WANTED)
-- Function: kern_return_t ds_device_read_reply_inband
(mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
The `device_read_request_inband' and `ds_device_read_reply_inband'
functions work as the `device_read_request' and
`ds_device_read_reply' functions, except that the data is returned
"in-line" in the reply IPC message (*note Memory::).
File: mach.info, Node: Device Write, Next: Device Map, Prev: Device Read, Up: Device Interface
10.5 Device Write
=================
-- Function: kern_return_t device_write (device_t DEVICE,
dev_mode_t MODE, recnum_t RECNUM, io_buf_ptr_t DATA,
mach_msg_type_number_t DATA_COUNT, int *BYTES_WRITTEN)
The function `device_write' writes DATA_COUNT bytes from the
buffer DATA to DEVICE. The number of bytes actually written is
returned in BYTES_WRITTEN.
If MODE is `D_NOWAIT', the function returns without waiting for
I/O completion. Otherwise MODE should be 0. RECNUM is the record
number to be written, its meaning is device specific.
The function returns `D_SUCCESS' if some data was successfully
written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port or the device is dead or not completely open.
-- Function: kern_return_t device_write_inband (device_t DEVICE,
dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT)
The `device_write_inband' function works as the `device_write'
function, except that the data is sent "in-line" in the request IPC
message (*note Memory::).
-- Function: kern_return_t device_write_request (device_t DEVICE,
mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM,
io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
-- Function: kern_return_t ds_device_write_reply
(mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
int BYTES_WRITTEN)
This is the asynchronous form of the `device_write' function.
`device_write_request' performs the write request. The meaning for
the parameters is as in `device_write'. Additionally, the caller
has to supply a reply port to which the `ds_device_write_reply'
message is sent by the kernel when the write has been performed.
The return value of the write operation is stored in RETURN_CODE.
As neither function receives a reply message, only message
transmission errors apply. If no error occurs, `KERN_SUCCESS' is
returned.
-- Function: kern_return_t device_write_request_inband
(device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE,
recnum_t RECNUM, io_buf_ptr_t DATA,
mach_msg_type_number_t DATA_COUNT)
-- Function: kern_return_t ds_device_write_reply_inband
(mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
int BYTES_WRITTEN)
The `device_write_request_inband' and
`ds_device_write_reply_inband' functions work as the
`device_write_request' and `ds_device_write_reply' functions,
except that the data is sent "in-line" in the request IPC message
(*note Memory::).
File: mach.info, Node: Device Map, Next: Device Status, Prev: Device Write, Up: Device Interface
10.6 Device Map
===============
-- Function: kern_return_t device_map (device_t DEVICE,
vm_prot_t PROT, vm_offset_t OFFSET, vm_size_t SIZE,
mach_port_t *PAGER, int UNMAP)
The function `device_map' creates a new memory manager for DEVICE
and returns a port to it in PAGER. The memory manager is usable
as a memory object in a `vm_map' call. The call is device
dependant.
The protection for the memory object is specified by PROT. The
memory object starts at OFFSET within the device and extends SIZE
bytes. UNMAP is currently unused.
The function returns `D_SUCCESS' if some data was successfully
written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port or the device is dead or not completely open.
File: mach.info, Node: Device Status, Next: Device Filter, Prev: Device Map, Up: Device Interface
10.7 Device Status
==================
-- Function: kern_return_t device_set_status (device_t DEVICE,
dev_flavor_t FLAVOR, dev_status_t STATUS,
mach_msg_type_number_t STATUS_COUNT)
The function `device_set_status' sets the status of a device. The
possible values for FLAVOR and their interpretation is device
specific.
The function returns `D_SUCCESS' if some data was successfully
written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port or the device is dead or not completely open.
-- Function: kern_return_t device_get_status (device_t DEVICE,
dev_flavor_t FLAVOR, dev_status_t STATUS,
mach_msg_type_number_t *STATUS_COUNT)
The function `device_get_status' gets the status of a device. The
possible values for FLAVOR and their interpretation is device
specific.
The function returns `D_SUCCESS' if some data was successfully
written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port or the device is dead or not completely open.
File: mach.info, Node: Device Filter, Prev: Device Status, Up: Device Interface
10.8 Device Filter
==================
-- Function: kern_return_t device_set_filter (device_t DEVICE,
mach_port_t RECEIVE_PORT,
mach_msg_type_name_t RECEIVE_PORT_TYPE, int PRIORITY,
filter_array_t FILTER, mach_msg_type_number_t FILTER_COUNT)
The function `device_set_filter' makes it possible to filter out
selected data arriving at the device and forward it to a port.
FILTER is a list of filter commands, which are applied to incoming
data to determine if the data should be sent to RECEIVE_PORT. The
IPC type of the send right is specified by RECEIVE_PORT_RIGHT, it
is either `MACH_MSG_TYPE_MAKE_SEND' or `MACH_MSG_TYPE_MOVE_SEND'.
The PRIORITY value is used to order multiple filters.
There can be up to `NET_MAX_FILTER' commands in FILTER. The
actual number of commands is passed in FILTER_COUNT. For the
purpose of the filter test, an internal stack is provided. After
all commands have been processed, the value on the top of the stack
determines if the data is forwarded or the next filter is tried.
Each word of the command list specifies a data (push) operation
(high order NETF_NBPO bits) as well as a binary operator (low
order NETF_NBPA bits). The value to be pushed onto the stack is
chosen as follows.
`NETF_PUSHLIT'
Use the next short word of the filter as the value.
`NETF_PUSHZERO'
Use 0 as the value.
`NETF_PUSHWORD+N'
Use short word N of the "data" portion of the message as the
value.
`NETF_PUSHHDR+N'
Use short word N of the "header" portion of the message as
the value.
`NETF_PUSHIND+N'
Pops the top long word from the stack and then uses short
word N of the "data" portion of the message as the value.
`NETF_PUSHHDRIND+N'
Pops the top long word from the stack and then uses short
word N of the "header" portion of the message as the value.
`NETF_PUSHSTK+N'
Use long word N of the stack (where the top of stack is long
word 0) as the value.
`NETF_NOPUSH'
Don't push a value.
The unsigned value so chosen is promoted to a long word before
being pushed. Once a value is pushed (except for the case of
`NETF_NOPUSH'), the top two long words of the stack are popped and
a binary operator applied to them (with the old top of stack as the
second operand). The result of the operator is pushed on the
stack. These operators are:
`NETF_NOP'
Don't pop off any values and do no operation.
`NETF_EQ'
Perform an equal comparison.
`NETF_LT'
Perform a less than comparison.
`NETF_LE'
Perform a less than or equal comparison.
`NETF_GT'
Perform a greater than comparison.
`NETF_GE'
Perform a greater than or equal comparison.
`NETF_AND'
Perform a bitise boolean AND operation.
`NETF_OR'
Perform a bitise boolean inclusive OR operation.
`NETF_XOR'
Perform a bitise boolean exclusive OR operation.
`NETF_NEQ'
Perform a not equal comparison.
`NETF_LSH'
Perform a left shift operation.
`NETF_RSH'
Perform a right shift operation.
`NETF_ADD'
Perform an addition.
`NETF_SUB'
Perform a subtraction.
`NETF_COR'
Perform an equal comparison. If the comparison is `TRUE',
terminate the filter list. Otherwise, pop the result of the
comparison off the stack.
`NETF_CAND'
Perform an equal comparison. If the comparison is `FALSE',
terminate the filter list. Otherwise, pop the result of the
comparison off the stack.
`NETF_CNOR'
Perform a not equal comparison. If the comparison is `FALSE',
terminate the filter list. Otherwise, pop the result of the
comparison off the stack.
`NETF_CNAND'
Perform a not equal comparison. If the comparison is `TRUE',
terminate the filter list. Otherwise, pop the result of the
comparison off the stack. The scan of the filter list
terminates when the filter list is emptied, or a `NETF_C...'
operation terminates the list. At this time, if the final
value of the top of the stack is `TRUE', then the message is
accepted for the filter.
The function returns `D_SUCCESS' if some data was successfully
written, `D_INVALID_OPERATION' if RECEIVE_PORT is not a valid send
right, and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
port or the device is dead or not completely open.
File: mach.info, Node: Kernel Debugger, Next: Copying, Prev: Device Interface, Up: Top
11 Kernel Debugger
******************
The GNU Mach kernel debugger `ddb' is a powerful built-in debugger with
a gdb like syntax. It is enabled at compile time using the
`--enable-kdb' option. Whenever you want to enter the debugger while
running the kernel, you can press the key combination <Ctrl-Alt-D>.
* Menu:
* Operation:: Basic architecture of the kernel debugger.
* Commands:: Available commands in the kernel debugger.
* Variables:: Access of variables from the kernel debugger.
* Expressions:: Usage of expressions in the kernel debugger.
File: mach.info, Node: Operation, Next: Commands, Up: Kernel Debugger
11.1 Operation
==============
The current location is called "dot". The dot is displayed with a
hexadecimal format at a prompt. Examine and write commands update dot
to the address of the last line examined or the last location modified,
and set "next" to the address of the next location to be examined or
changed. Other commands don't change dot, and set next to be the same
as dot.
The general command syntax is:
COMMAND[/MODIFIER] ADDRESS [,COUNT]
`!!' repeats the previous command, and a blank line repeats from the
address next with count 1 and no modifiers. Specifying ADDRESS sets
dot to the address. Omitting ADDRESS uses dot. A missing COUNT is
taken to be 1 for printing commands or infinity for stack traces.
Current `ddb' is enhanced to support multi-thread debugging. A
break point can be set only for a specific thread, and the address space
or registers of non current thread can be examined or modified if
supported by machine dependent routines. For example,
break/t mach_msg_trap $task11.0
sets a break point at `mach_msg_trap' for the first thread of task
11 listed by a `show all threads' command.
In the above example, `$task11.0' is translated to the corresponding
thread structure's address by variable translation mechanism described
later. If a default target thread is set in a variable `$thread', the
`$task11.0' can be omitted. In general, if `t' is specified in a
modifier of a command line, a specified thread or a default target
thread is used as a target thread instead of the current one. The `t'
modifier in a command line is not valid in evaluating expressions in a
command line. If you want to get a value indirectly from a specific
thread's address space or access to its registers within an expression,
you have to specify a default target thread in advance, and to use `:t'
modifier immediately after the indirect access or the register
reference like as follows:
set $thread $task11.0
print $eax:t *(0x100):tuh
No sign extension and indirection `size(long, half word, byte)' can
be specified with `u', `l', `h' and `b' respectively for the indirect
access.
Note: Support of non current space/register access and user space
break point depend on the machines. If not supported, attempts of such
operation may provide incorrect information or may cause strange
behavior. Even if supported, the user space access is limited to the
pages resident in the main memory at that time. If a target page is not
in the main memory, an error will be reported.
`ddb' has a feature like a command `more' for the output. If an
output line exceeds the number set in the `$lines' variable, it
displays `--db_more--' and waits for a response. The valid responses
for it are:
`<SPC>'
one more page
`<RET>'
one more line
`q'
abort the current command, and return to the command input mode