From 7cad6f7211281c8be1e92f85b6181c3d9d2665e7 Mon Sep 17 00:00:00 2001 From: Thomas Schwinge Date: Sun, 8 Oct 2006 13:47:28 +0000 Subject: 2006-10-08 Thomas Schwinge * linux/dev/drivers/scsi/sr.c: Move file... * linux/src/drivers/scsi/sr.c: ... here. --- linux/dev/drivers/scsi/sr.c | 1290 ------------------------------------------- linux/src/drivers/scsi/sr.c | 13 +- 2 files changed, 11 insertions(+), 1292 deletions(-) delete mode 100644 linux/dev/drivers/scsi/sr.c (limited to 'linux') diff --git a/linux/dev/drivers/scsi/sr.c b/linux/dev/drivers/scsi/sr.c deleted file mode 100644 index 8f44246..0000000 --- a/linux/dev/drivers/scsi/sr.c +++ /dev/null @@ -1,1290 +0,0 @@ -/* - * sr.c Copyright (C) 1992 David Giller - * Copyright (C) 1993, 1994, 1995 Eric Youngdale - * - * adapted from: - * sd.c Copyright (C) 1992 Drew Eckhardt - * Linux scsi disk driver by - * Drew Eckhardt - * - * Modified by Eric Youngdale ericy@cais.com to - * add scatter-gather, multiple outstanding request, and other - * enhancements. - * - * Modified by Eric Youngdale eric@aib.com to support loadable - * low-level scsi drivers. - * - * Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to - * provide auto-eject. - * - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAJOR_NR SCSI_CDROM_MAJOR -#include -#include "scsi.h" -#include "hosts.h" -#include "sr.h" -#include /* For the door lock/unlock commands */ -#include "constants.h" - -#define MAX_RETRIES 3 -#define SR_TIMEOUT (30 * HZ) - -static int sr_init(void); -static void sr_finish(void); -static int sr_attach(Scsi_Device *); -static int sr_detect(Scsi_Device *); -static void sr_detach(Scsi_Device *); - -struct Scsi_Device_Template sr_template = {NULL, "cdrom", "sr", NULL, TYPE_ROM, - SCSI_CDROM_MAJOR, 0, 0, 0, 1, - sr_detect, sr_init, - sr_finish, sr_attach, sr_detach}; - -Scsi_CD * scsi_CDs = NULL; -static int * sr_sizes; - -static int * sr_blocksizes; - -static int sr_open(struct inode *, struct file *); -void get_sectorsize(int); -void sr_photocd(struct inode *); - -extern int sr_ioctl(struct inode *, struct file *, unsigned int, unsigned long); - -void requeue_sr_request (Scsi_Cmnd * SCpnt); -static int check_cdrom_media_change(kdev_t); - -static void sr_release(struct inode * inode, struct file * file) -{ - sync_dev(inode->i_rdev); - if(! --scsi_CDs[MINOR(inode->i_rdev)].device->access_count) - { - sr_ioctl(inode, NULL, SCSI_IOCTL_DOORUNLOCK, 0); - if (scsi_CDs[MINOR(inode->i_rdev)].auto_eject) - sr_ioctl(inode, NULL, CDROMEJECT, 0); - } - if (scsi_CDs[MINOR(inode->i_rdev)].device->host->hostt->usage_count) - (*scsi_CDs[MINOR(inode->i_rdev)].device->host->hostt->usage_count)--; - if(sr_template.usage_count) (*sr_template.usage_count)--; -} - -static struct file_operations sr_fops = -{ - NULL, /* lseek - default */ - block_read, /* read - general block-dev read */ - block_write, /* write - general block-dev write */ - NULL, /* readdir - bad */ - NULL, /* select */ - sr_ioctl, /* ioctl */ - NULL, /* mmap */ - sr_open, /* special open code */ - sr_release, /* release */ - NULL, /* fsync */ - NULL, /* fasync */ - check_cdrom_media_change, /* Disk change */ - NULL /* revalidate */ -}; - -/* - * This function checks to see if the media has been changed in the - * CDROM drive. It is possible that we have already sensed a change, - * or the drive may have sensed one and not yet reported it. We must - * be ready for either case. This function always reports the current - * value of the changed bit. If flag is 0, then the changed bit is reset. - * This function could be done as an ioctl, but we would need to have - * an inode for that to work, and we do not always have one. - */ - -int check_cdrom_media_change(kdev_t full_dev){ - int retval, target; - struct inode inode; - int flag = 0; - - target = MINOR(full_dev); - - if (target >= sr_template.nr_dev) { - printk("CD-ROM request error: invalid device.\n"); - return 0; - }; - - inode.i_rdev = full_dev; /* This is all we really need here */ - retval = sr_ioctl(&inode, NULL, SCSI_IOCTL_TEST_UNIT_READY, 0); - - if(retval){ /* Unable to test, unit probably not ready. This usually - * means there is no disc in the drive. Mark as changed, - * and we will figure it out later once the drive is - * available again. */ - - scsi_CDs[target].device->changed = 1; - return 1; /* This will force a flush, if called from - * check_disk_change */ - }; - - retval = scsi_CDs[target].device->changed; - if(!flag) { - scsi_CDs[target].device->changed = 0; - /* If the disk changed, the capacity will now be different, - * so we force a re-read of this information */ - if (retval) scsi_CDs[target].needs_sector_size = 1; - }; - return retval; -} - -/* - * rw_intr is the interrupt routine for the device driver. It will be notified on the - * end of a SCSI read / write, and will take on of several actions based on success or failure. - */ - -static void rw_intr (Scsi_Cmnd * SCpnt) -{ - int result = SCpnt->result; - int this_count = SCpnt->this_count; - int good_sectors = (result == 0 ? this_count : 0); - int block_sectors = 0; - -#ifdef DEBUG - printk("sr.c done: %x %x\n",result, SCpnt->request.bh->b_data); -#endif - /* - Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial success. - Since this is a relatively rare error condition, no care is taken to - avoid unnecessary additional work such as memcpy's that could be avoided. - */ - - if (driver_byte(result) != 0 && /* An error occurred */ - SCpnt->sense_buffer[0] == 0xF0 && /* Sense data is valid */ - (SCpnt->sense_buffer[2] == MEDIUM_ERROR || - SCpnt->sense_buffer[2] == VOLUME_OVERFLOW || - SCpnt->sense_buffer[2] == ILLEGAL_REQUEST)) - { - long error_sector = (SCpnt->sense_buffer[3] << 24) | - (SCpnt->sense_buffer[4] << 16) | - (SCpnt->sense_buffer[5] << 8) | - SCpnt->sense_buffer[6]; - int device_nr = DEVICE_NR(SCpnt->request.rq_dev); - if (SCpnt->request.bh != NULL) - block_sectors = SCpnt->request.bh->b_size >> 9; - if (block_sectors < 4) block_sectors = 4; - if (scsi_CDs[device_nr].sector_size == 2048) - error_sector <<= 2; - error_sector &= ~ (block_sectors - 1); - good_sectors = error_sector - SCpnt->request.sector; - if (good_sectors < 0 || good_sectors >= this_count) - good_sectors = 0; - /* - The SCSI specification allows for the value returned by READ - CAPACITY to be up to 75 2K sectors past the last readable - block. Therefore, if we hit a medium error within the last - 75 2K sectors, we decrease the saved size value. - */ - if ((error_sector >> 1) < sr_sizes[device_nr] && - scsi_CDs[device_nr].capacity - error_sector < 4*75) - sr_sizes[device_nr] = error_sector >> 1; - } - - if (good_sectors > 0) - { /* Some sectors were read successfully. */ - if (SCpnt->use_sg == 0) { - if (SCpnt->buffer != SCpnt->request.buffer) - { - int offset; - offset = (SCpnt->request.sector % 4) << 9; - memcpy((char *)SCpnt->request.buffer, - (char *)SCpnt->buffer + offset, - good_sectors << 9); - /* Even though we are not using scatter-gather, we look - * ahead and see if there is a linked request for the - * other half of this buffer. If there is, then satisfy - * it. */ - if((offset == 0) && good_sectors == 2 && - SCpnt->request.nr_sectors > good_sectors && - SCpnt->request.bh && - SCpnt->request.bh->b_reqnext && - SCpnt->request.bh->b_reqnext->b_size == 1024) { - memcpy((char *)SCpnt->request.bh->b_reqnext->b_data, - (char *)SCpnt->buffer + 1024, - 1024); - good_sectors += 2; - }; - - scsi_free(SCpnt->buffer, 2048); - } - } else { - struct scatterlist * sgpnt; - int i; - sgpnt = (struct scatterlist *) SCpnt->buffer; - for(i=0; iuse_sg; i++) { - if (sgpnt[i].alt_address) { - if (sgpnt[i].alt_address != sgpnt[i].address) { - memcpy(sgpnt[i].alt_address, sgpnt[i].address, sgpnt[i].length); - }; - scsi_free(sgpnt[i].address, sgpnt[i].length); - }; - }; - scsi_free(SCpnt->buffer, SCpnt->sglist_len); /* Free list of scatter-gather pointers */ - if(SCpnt->request.sector % 4) good_sectors -= 2; - /* See if there is a padding record at the end that needs to be removed */ - if(good_sectors > SCpnt->request.nr_sectors) - good_sectors -= 2; - }; - -#ifdef DEBUG - printk("(%x %x %x) ",SCpnt->request.bh, SCpnt->request.nr_sectors, - good_sectors); -#endif - if (SCpnt->request.nr_sectors > this_count) - { - SCpnt->request.errors = 0; - if (!SCpnt->request.bh) - panic("sr.c: linked page request (%lx %x)", - SCpnt->request.sector, this_count); - } - - SCpnt = end_scsi_request(SCpnt, 1, good_sectors); /* All done */ - if (result == 0) - { - requeue_sr_request(SCpnt); - return; - } - } - - if (good_sectors == 0) { - /* We only come through here if no sectors were read successfully. */ - - /* Free up any indirection buffers we allocated for DMA purposes. */ - if (SCpnt->use_sg) { - struct scatterlist * sgpnt; - int i; - sgpnt = (struct scatterlist *) SCpnt->buffer; - for(i=0; iuse_sg; i++) { - if (sgpnt[i].alt_address) { - scsi_free(sgpnt[i].address, sgpnt[i].length); - } - } - scsi_free(SCpnt->buffer, SCpnt->sglist_len); /* Free list of scatter-gather pointers */ - } else { - if (SCpnt->buffer != SCpnt->request.buffer) - scsi_free(SCpnt->buffer, SCpnt->bufflen); - } - - } - - if (driver_byte(result) != 0) { - if ((SCpnt->sense_buffer[0] & 0x7f) == 0x70) { - if ((SCpnt->sense_buffer[2] & 0xf) == UNIT_ATTENTION) { - /* detected disc change. set a bit and quietly refuse - * further access. */ - - scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].device->changed = 1; - SCpnt = end_scsi_request(SCpnt, 0, this_count); - requeue_sr_request(SCpnt); - return; - } - } - - if (SCpnt->sense_buffer[2] == ILLEGAL_REQUEST) { - printk("CD-ROM error: "); - print_sense("sr", SCpnt); - printk("command was: "); - print_command(SCpnt->cmnd); - if (scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].ten) { - scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].ten = 0; - requeue_sr_request(SCpnt); - result = 0; - return; - } else { - SCpnt = end_scsi_request(SCpnt, 0, this_count); - requeue_sr_request(SCpnt); /* Do next request */ - return; - } - - } - - if (SCpnt->sense_buffer[2] == NOT_READY) { - printk("CD-ROM not ready. Make sure you have a disc in the drive.\n"); - SCpnt = end_scsi_request(SCpnt, 0, this_count); - requeue_sr_request(SCpnt); /* Do next request */ - return; - } - - if (SCpnt->sense_buffer[2] == MEDIUM_ERROR) { - printk("scsi%d: MEDIUM ERROR on " - "channel %d, id %d, lun %d, CDB: ", - SCpnt->host->host_no, (int) SCpnt->channel, - (int) SCpnt->target, (int) SCpnt->lun); - print_command(SCpnt->cmnd); - print_sense("sr", SCpnt); - SCpnt = end_scsi_request(SCpnt, 0, block_sectors); - requeue_sr_request(SCpnt); - return; - } - - if (SCpnt->sense_buffer[2] == VOLUME_OVERFLOW) { - printk("scsi%d: VOLUME OVERFLOW on " - "channel %d, id %d, lun %d, CDB: ", - SCpnt->host->host_no, (int) SCpnt->channel, - (int) SCpnt->target, (int) SCpnt->lun); - print_command(SCpnt->cmnd); - print_sense("sr", SCpnt); - SCpnt = end_scsi_request(SCpnt, 0, block_sectors); - requeue_sr_request(SCpnt); - return; - } - } - - /* We only get this far if we have an error we have not recognized */ - if(result) { - printk("SCSI CD error : host %d id %d lun %d return code = %03x\n", - scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].device->host->host_no, - scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].device->id, - scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].device->lun, - result); - - if (status_byte(result) == CHECK_CONDITION) - print_sense("sr", SCpnt); - - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.current_nr_sectors); - requeue_sr_request(SCpnt); - } -} - -/* - * Here I tried to implement support for multisession-CD's - * - * Much of this has do be done with vendor-specific SCSI-commands, because - * multisession is newer than the SCSI-II standard. - * So I have to complete it step by step. Useful information is welcome. - * - * Actually works: - * - NEC: Detection and support of multisession CD's. Special handling - * for XA-disks is not necessary. - * - * - TOSHIBA: setting density is done here now, mounting PhotoCD's should - * work now without running the program "set_density" - * Multisession CD's are supported too. - * - * Gerd Knorr - */ -/* - * 19950704 operator@melchior.cuivre.fdn.fr (Thomas Quinot) - * - * - SONY: Same as Nec. - * - * - PIONEER: works with SONY code (may be others too ?) - */ - -void sr_photocd(struct inode *inode) -{ - unsigned long sector,min,sec,frame; - unsigned char buf[40]; /* the buffer for the ioctl */ - unsigned char *cmd; /* the scsi-command */ - unsigned char *send; /* the data we send to the drive ... */ - unsigned char *rec; /* ... and get back */ - int rc,is_xa,no_multi; - - if (scsi_CDs[MINOR(inode->i_rdev)].xa_flags & 0x02) { -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: CDROM and/or driver do not support multisession CD's"); -#endif - return; - } - - if (!suser()) { - /* I'm not the superuser, so SCSI_IOCTL_SEND_COMMAND isn't allowed - * for me. That's why mpcd_sector will be initialized with zero, - * because I'm not able to get the right value. Necessary only if - * access_count is 1, else no disk change happened since the last - * call of this function and we can keep the old value. - */ - if (1 == scsi_CDs[MINOR(inode->i_rdev)].device->access_count) { - scsi_CDs[MINOR(inode->i_rdev)].mpcd_sector = 0; - scsi_CDs[MINOR(inode->i_rdev)].xa_flags &= ~0x01; - } - return; - } - - sector = 0; - is_xa = 0; - no_multi = 0; - cmd = rec = &buf[8]; - - switch(scsi_CDs[MINOR(inode->i_rdev)].device->manufacturer) { - - case SCSI_MAN_NEC: -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: use NEC code\n"); -#endif - memset(buf,0,40); - *((unsigned int*)buf) = 0x0; /* we send nothing... */ - *((unsigned int*)buf+1) = 0x16; /* and receive 0x16 bytes */ - cmd[0] = 0xde; - cmd[1] = 0x03; - cmd[2] = 0xb0; - rc = kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_SEND_COMMAND, buf); - if (rc != 0) { - if (rc != 0x28000002) /* drop "not ready" */ - printk(KERN_WARNING"sr_photocd: ioctl error (NEC): 0x%x\n",rc); - break; - } - if (rec[14] != 0 && rec[14] != 0xb0) { - printk(KERN_INFO"sr_photocd: (NEC) Hmm, seems the CDROM doesn't support multisession CD's\n"); - no_multi = 1; - break; - } - min = (unsigned long) rec[15]/16*10 + (unsigned long) rec[15]%16; - sec = (unsigned long) rec[16]/16*10 + (unsigned long) rec[16]%16; - frame = (unsigned long) rec[17]/16*10 + (unsigned long) rec[17]%16; - sector = min*CD_SECS*CD_FRAMES + sec*CD_FRAMES + frame; - is_xa = (rec[14] == 0xb0); -#ifdef DEBUG - if (sector) { - printk(KERN_DEBUG "sr_photocd: multisession CD detected. start: %lu\n",sector); - } -#endif - break; - - case SCSI_MAN_TOSHIBA: -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: use TOSHIBA code\n"); -#endif - - /* we request some disc information (is it a XA-CD ?, - * where starts the last session ?) */ - memset(buf,0,40); - *((unsigned int*)buf) = (unsigned int) 0; - *((unsigned int*)buf+1) = (unsigned int) 4; /* receive 4 bytes */ - cmd[0] = (unsigned char) 0x00c7; - cmd[1] = (unsigned char) 3; - rc = kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_SEND_COMMAND, buf); - if (rc != 0) { - if (rc == 0x28000002) { - /* Got a "not ready" - error. No chance to find out if this is - * because there is no CD in the drive or because the drive - * don't knows multisession CD's. So I need to do an extra - * check... */ - if (!kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_TEST_UNIT_READY, NULL)) { - printk(KERN_INFO "sr_photocd: (TOSHIBA) Hmm, seems the CDROM doesn't support multisession CD's\n"); - no_multi = 1; - } - } else - printk(KERN_INFO"sr_photocd: ioctl error (TOSHIBA #1): 0x%x\n",rc); - break; /* if the first ioctl fails, we don't call the second one */ - } - is_xa = (rec[0] == 0x20); - min = (unsigned long) rec[1]/16*10 + (unsigned long) rec[1]%16; - sec = (unsigned long) rec[2]/16*10 + (unsigned long) rec[2]%16; - frame = (unsigned long) rec[3]/16*10 + (unsigned long) rec[3]%16; - sector = min*CD_SECS*CD_FRAMES + sec*CD_FRAMES + frame; - if (sector) { - sector -= CD_BLOCK_OFFSET; -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: multisession CD detected: start: %lu\n",sector); -#endif - } - - /* now we do a get_density... */ - memset(buf,0,40); - *((unsigned int*)buf) = (unsigned int) 0; - *((unsigned int*)buf+1) = (unsigned int) 12; - cmd[0] = (unsigned char) MODE_SENSE; - cmd[2] = (unsigned char) 1; - cmd[4] = (unsigned char) 12; - rc = kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_SEND_COMMAND, buf); - if (rc != 0) { - printk(KERN_WARNING "sr_photocd: ioctl error (TOSHIBA #2): 0x%x\n",rc); - break; - } -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: get_density: 0x%x\n",rec[4]); -#endif - - /* ...and only if necessary a set_density */ - if ((rec[4] != 0x81 && is_xa) || (rec[4] != 0 && !is_xa)) { -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: doing set_density\n"); -#endif - memset(buf,0,40); - *((unsigned int*)buf) = (unsigned int) 12; /* send 12 bytes */ - *((unsigned int*)buf+1) = (unsigned int) 0; - cmd[0] = (unsigned char) MODE_SELECT; - cmd[1] = (unsigned char) (1 << 4); - cmd[4] = (unsigned char) 12; - send = &cmd[6]; /* this is a 6-Byte command */ - send[ 3] = (unsigned char) 0x08; /* data for cmd */ - /* density 0x81 for XA, 0 else */ - send[ 4] = (is_xa) ? - (unsigned char) 0x81 : (unsigned char) 0; - send[10] = (unsigned char) 0x08; - rc = kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_SEND_COMMAND, buf); - if (rc != 0) { - printk(KERN_WARNING "sr_photocd: ioctl error (TOSHIBA #3): 0x%x\n",rc); - } - /* The set_density command may have changed the - * sector size or capacity. */ - scsi_CDs[MINOR(inode->i_rdev)].needs_sector_size = 1; - } - break; - - case SCSI_MAN_SONY: /* Thomas QUINOT */ - case SCSI_MAN_PIONEER: - case SCSI_MAN_UNKNOWN: -#ifdef DEBUG - printk(KERN_DEBUG "sr_photocd: use SONY/PIONEER code\n"); -#endif - get_sectorsize(MINOR(inode->i_rdev)); /* spinup (avoid timeout) */ - memset(buf,0,40); - *((unsigned int*)buf) = 0x0; /* we send nothing... */ - *((unsigned int*)buf+1) = 0x0c; /* and receive 0x0c bytes */ - cmd[0] = READ_TOC; - cmd[8] = 0x0c; - cmd[9] = 0x40; - rc = kernel_scsi_ioctl(scsi_CDs[MINOR(inode->i_rdev)].device, - SCSI_IOCTL_SEND_COMMAND, buf); - - if (rc != 0) { - if (rc != 0x28000002) /* drop "not ready" */ - printk(KERN_WARNING "sr_photocd: ioctl error (SONY/PIONEER): 0x%x\n",rc); - break; - } - if ((rec[0] << 8) + rec[1] < 0x0a) { - printk(KERN_INFO "sr_photocd: (SONY/PIONEER) Hmm, seems the CDROM doesn't support multisession CD's\n"); - no_multi = 1; - break; - } - sector = rec[11] + (rec[10] << 8) + (rec[9] << 16) + (rec[8] << 24); - is_xa = !!sector; -#ifdef DEBUG - if (sector) - printk (KERN_DEBUG "sr_photocd: multisession CD detected. start: %lu\n",sector); -#endif - break; - - case SCSI_MAN_NEC_OLDCDR: - default: - sector = 0; - no_multi = 1; - break; } - - scsi_CDs[MINOR(inode->i_rdev)].mpcd_sector = sector; - if (is_xa) - scsi_CDs[MINOR(inode->i_rdev)].xa_flags |= 0x01; - else - scsi_CDs[MINOR(inode->i_rdev)].xa_flags &= ~0x01; - if (no_multi) - scsi_CDs[MINOR(inode->i_rdev)].xa_flags |= 0x02; - return; -} - -static int sr_open(struct inode * inode, struct file * filp) -{ - if(MINOR(inode->i_rdev) >= sr_template.nr_dev || - !scsi_CDs[MINOR(inode->i_rdev)].device) return -ENXIO; /* No such device */ - - if (filp->f_mode & 2) - return -EROFS; - - if(sr_template.usage_count) (*sr_template.usage_count)++; - - sr_ioctl(inode,filp,CDROMCLOSETRAY,0); - check_disk_change(inode->i_rdev); - - if(!scsi_CDs[MINOR(inode->i_rdev)].device->access_count++) - sr_ioctl(inode, NULL, SCSI_IOCTL_DOORLOCK, 0); - if (scsi_CDs[MINOR(inode->i_rdev)].device->host->hostt->usage_count) - (*scsi_CDs[MINOR(inode->i_rdev)].device->host->hostt->usage_count)++; - - sr_photocd(inode); - - /* If this device did not have media in the drive at boot time, then - * we would have been unable to get the sector size. Check to see if - * this is the case, and try again. - */ - - if(scsi_CDs[MINOR(inode->i_rdev)].needs_sector_size) - get_sectorsize(MINOR(inode->i_rdev)); - - return 0; -} - - -/* - * do_sr_request() is the request handler function for the sr driver. - * Its function in life is to take block device requests, and - * translate them to SCSI commands. - */ - -static void do_sr_request (void) -{ - Scsi_Cmnd * SCpnt = NULL; - struct request * req = NULL; - Scsi_Device * SDev; - unsigned long flags; - int flag = 0; - - while (1==1){ - save_flags(flags); - cli(); - if (CURRENT != NULL && CURRENT->rq_status == RQ_INACTIVE) { - restore_flags(flags); - return; - }; - - INIT_SCSI_REQUEST; - - SDev = scsi_CDs[DEVICE_NR(CURRENT->rq_dev)].device; - - /* - * I am not sure where the best place to do this is. We need - * to hook in a place where we are likely to come if in user - * space. - */ - if( SDev->was_reset ) - { - /* - * We need to relock the door, but we might - * be in an interrupt handler. Only do this - * from user space, since we do not want to - * sleep from an interrupt. - */ - if( SDev->removable && !intr_count ) - { - scsi_ioctl(SDev, SCSI_IOCTL_DOORLOCK, 0); - } - SDev->was_reset = 0; - } - - if (flag++ == 0) - SCpnt = allocate_device(&CURRENT, - scsi_CDs[DEVICE_NR(CURRENT->rq_dev)].device, 0); - else SCpnt = NULL; - restore_flags(flags); - - /* This is a performance enhancement. We dig down into the request list and - * try to find a queueable request (i.e. device not busy, and host able to - * accept another command. If we find one, then we queue it. This can - * make a big difference on systems with more than one disk drive. We want - * to have the interrupts off when monkeying with the request list, because - * otherwise the kernel might try to slip in a request in between somewhere. */ - - if (!SCpnt && sr_template.nr_dev > 1){ - struct request *req1; - req1 = NULL; - save_flags(flags); - cli(); - req = CURRENT; - while(req){ - SCpnt = request_queueable(req, - scsi_CDs[DEVICE_NR(req->rq_dev)].device); - if(SCpnt) break; - req1 = req; - req = req->next; - }; - if (SCpnt && req->rq_status == RQ_INACTIVE) { - if (req == CURRENT) - CURRENT = CURRENT->next; - else - req1->next = req->next; - }; - restore_flags(flags); - }; - - if (!SCpnt) - return; /* Could not find anything to do */ - - wake_up(&wait_for_request); - - /* Queue command */ - requeue_sr_request(SCpnt); - }; /* While */ -} - -void requeue_sr_request (Scsi_Cmnd * SCpnt) -{ - unsigned int dev, block, realcount; - unsigned char cmd[10], *buffer, tries; - int this_count, start, end_rec; - - tries = 2; - - repeat: - if(!SCpnt || SCpnt->request.rq_status == RQ_INACTIVE) { - do_sr_request(); - return; - } - - dev = MINOR(SCpnt->request.rq_dev); - block = SCpnt->request.sector; - buffer = NULL; - this_count = 0; - - if (dev >= sr_template.nr_dev) { - /* printk("CD-ROM request error: invalid device.\n"); */ - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - tries = 2; - goto repeat; - } - - if (!scsi_CDs[dev].use) { - /* printk("CD-ROM request error: device marked not in use.\n"); */ - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - tries = 2; - goto repeat; - } - - if (scsi_CDs[dev].device->changed) { - /* - * quietly refuse to do anything to a changed disc - * until the changed bit has been reset - */ - /* printk("CD-ROM has been changed. Prohibiting further I/O.\n"); */ - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - tries = 2; - goto repeat; - } - - switch (SCpnt->request.cmd) - { - case WRITE: - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - goto repeat; - break; - case READ : - cmd[0] = READ_6; - break; - default : - panic ("Unknown sr command %d\n", SCpnt->request.cmd); - } - - cmd[1] = (SCpnt->lun << 5) & 0xe0; - - /* - * Now do the grungy work of figuring out which sectors we need, and - * where in memory we are going to put them. - * - * The variables we need are: - * - * this_count= number of 512 byte sectors being read - * block = starting cdrom sector to read. - * realcount = # of cdrom sectors to read - * - * The major difference between a scsi disk and a scsi cdrom - * is that we will always use scatter-gather if we can, because we can - * work around the fact that the buffer cache has a block size of 1024, - * and we have 2048 byte sectors. This code should work for buffers that - * are any multiple of 512 bytes long. - */ - - SCpnt->use_sg = 0; - - if (SCpnt->host->sg_tablesize > 0 && - (!need_isa_buffer || - dma_free_sectors >= 10)) { - struct buffer_head * bh; - struct scatterlist * sgpnt; - int count, this_count_max; - bh = SCpnt->request.bh; - this_count = 0; - count = 0; - this_count_max = (scsi_CDs[dev].ten ? 0xffff : 0xff) << 4; - /* Calculate how many links we can use. First see if we need - * a padding record at the start */ - this_count = SCpnt->request.sector % 4; - if(this_count) count++; - while(bh && count < SCpnt->host->sg_tablesize) { - if ((this_count + (bh->b_size >> 9)) > this_count_max) break; - this_count += (bh->b_size >> 9); - count++; - bh = bh->b_reqnext; - }; - /* Fix up in case of an odd record at the end */ - end_rec = 0; - if(this_count % 4) { - if (count < SCpnt->host->sg_tablesize) { - count++; - end_rec = (4 - (this_count % 4)) << 9; - this_count += 4 - (this_count % 4); - } else { - count--; - this_count -= (this_count % 4); - }; - }; - SCpnt->use_sg = count; /* Number of chains */ - /* scsi_malloc can only allocate in chunks of 512 bytes */ - count = (SCpnt->use_sg * sizeof(struct scatterlist) + 511) & ~511; - - SCpnt->sglist_len = count; - sgpnt = (struct scatterlist * ) scsi_malloc(count); - if (!sgpnt) { - printk("Warning - running *really* short on DMA buffers\n"); - SCpnt->use_sg = 0; /* No memory left - bail out */ - } else { - buffer = (unsigned char *) sgpnt; - count = 0; - bh = SCpnt->request.bh; - if(SCpnt->request.sector % 4) { - sgpnt[count].length = (SCpnt->request.sector % 4) << 9; - sgpnt[count].address = (char *) scsi_malloc(sgpnt[count].length); - if(!sgpnt[count].address) panic("SCSI DMA pool exhausted."); - sgpnt[count].alt_address = sgpnt[count].address; /* Flag to delete - if needed */ - count++; - }; - for(bh = SCpnt->request.bh; count < SCpnt->use_sg; - count++, bh = bh->b_reqnext) { - if (bh) { /* Need a placeholder at the end of the record? */ - sgpnt[count].address = bh->b_data; - sgpnt[count].length = bh->b_size; - sgpnt[count].alt_address = NULL; - } else { - sgpnt[count].address = (char *) scsi_malloc(end_rec); - if(!sgpnt[count].address) panic("SCSI DMA pool exhausted."); - sgpnt[count].length = end_rec; - sgpnt[count].alt_address = sgpnt[count].address; - if (count+1 != SCpnt->use_sg) panic("Bad sr request list"); - break; - }; - if (((long) sgpnt[count].address) + sgpnt[count].length - 1 > - ISA_DMA_THRESHOLD && SCpnt->host->unchecked_isa_dma) { - sgpnt[count].alt_address = sgpnt[count].address; - /* We try to avoid exhausting the DMA pool, since it is easier - * to control usage here. In other places we might have a more - * pressing need, and we would be screwed if we ran out */ - if(dma_free_sectors < (sgpnt[count].length >> 9) + 5) { - sgpnt[count].address = NULL; - } else { - sgpnt[count].address = (char *) scsi_malloc(sgpnt[count].length); - }; - /* If we start running low on DMA buffers, we abort the scatter-gather - * operation, and free all of the memory we have allocated. We want to - * ensure that all scsi operations are able to do at least a non-scatter/gather - * operation */ - if(sgpnt[count].address == NULL){ /* Out of dma memory */ - printk("Warning: Running low on SCSI DMA buffers"); - /* Try switching back to a non scatter-gather operation. */ - while(--count >= 0){ - if(sgpnt[count].alt_address) - scsi_free(sgpnt[count].address, sgpnt[count].length); - }; - SCpnt->use_sg = 0; - scsi_free(buffer, SCpnt->sglist_len); - break; - }; /* if address == NULL */ - }; /* if need DMA fixup */ - }; /* for loop to fill list */ -#ifdef DEBUG - printk("SR: %d %d %d %d %d *** ",SCpnt->use_sg, SCpnt->request.sector, - this_count, - SCpnt->request.current_nr_sectors, - SCpnt->request.nr_sectors); - for(count=0; countuse_sg; count++) - printk("SGlist: %d %x %x %x\n", count, - sgpnt[count].address, - sgpnt[count].alt_address, - sgpnt[count].length); -#endif - }; /* Able to allocate scatter-gather list */ - }; - - if (SCpnt->use_sg == 0){ - /* We cannot use scatter-gather. Do this the old fashion way */ - if (!SCpnt->request.bh) - this_count = SCpnt->request.nr_sectors; - else - this_count = (SCpnt->request.bh->b_size >> 9); - - start = block % 4; - if (start) - { - this_count = ((this_count > 4 - start) ? - (4 - start) : (this_count)); - buffer = (unsigned char *) scsi_malloc(2048); - } - else if (this_count < 4) - { - buffer = (unsigned char *) scsi_malloc(2048); - } - else - { - this_count -= this_count % 4; - buffer = (unsigned char *) SCpnt->request.buffer; - if (((long) buffer) + (this_count << 9) > ISA_DMA_THRESHOLD && - SCpnt->host->unchecked_isa_dma) - buffer = (unsigned char *) scsi_malloc(this_count << 9); - } - }; - - if (scsi_CDs[dev].sector_size == 2048) - block = block >> 2; /* These are the sectors that the cdrom uses */ - else - block = block & 0xfffffffc; - - realcount = (this_count + 3) / 4; - - if (scsi_CDs[dev].sector_size == 512) realcount = realcount << 2; - - if (((realcount > 0xff) || (block > 0x1fffff)) && scsi_CDs[dev].ten) - { - if (realcount > 0xffff) - { - realcount = 0xffff; - this_count = realcount * (scsi_CDs[dev].sector_size >> 9); - } - - cmd[0] += READ_10 - READ_6 ; - cmd[2] = (unsigned char) (block >> 24) & 0xff; - cmd[3] = (unsigned char) (block >> 16) & 0xff; - cmd[4] = (unsigned char) (block >> 8) & 0xff; - cmd[5] = (unsigned char) block & 0xff; - cmd[6] = cmd[9] = 0; - cmd[7] = (unsigned char) (realcount >> 8) & 0xff; - cmd[8] = (unsigned char) realcount & 0xff; - } - else - { - if (realcount > 0xff) - { - realcount = 0xff; - this_count = realcount * (scsi_CDs[dev].sector_size >> 9); - } - - cmd[1] |= (unsigned char) ((block >> 16) & 0x1f); - cmd[2] = (unsigned char) ((block >> 8) & 0xff); - cmd[3] = (unsigned char) block & 0xff; - cmd[4] = (unsigned char) realcount; - cmd[5] = 0; - } - -#ifdef DEBUG - { - int i; - printk("ReadCD: %d %d %d %d\n",block, realcount, buffer, this_count); - printk("Use sg: %d\n", SCpnt->use_sg); - printk("Dumping command: "); - for(i=0; i<12; i++) printk("%2.2x ", cmd[i]); - printk("\n"); - }; -#endif - - /* Some dumb host adapters can speed transfers by knowing the - * minimum transfersize in advance. - * - * We shouldn't disconnect in the middle of a sector, but the cdrom - * sector size can be larger than the size of a buffer and the - * transfer may be split to the size of a buffer. So it's safe to - * assume that we can at least transfer the minimum of the buffer - * size (1024) and the sector size between each connect / disconnect. - */ - - SCpnt->transfersize = (scsi_CDs[dev].sector_size > 1024) ? - 1024 : scsi_CDs[dev].sector_size; - - SCpnt->this_count = this_count; - scsi_do_cmd (SCpnt, (void *) cmd, buffer, - realcount * scsi_CDs[dev].sector_size, - rw_intr, SR_TIMEOUT, MAX_RETRIES); -} - -static int sr_detect(Scsi_Device * SDp){ - - if(SDp->type != TYPE_ROM && SDp->type != TYPE_WORM) return 0; - -#ifdef MACH - printk("Detected scsi CD-ROM cd%d at scsi%d, channel %d, id %d, lun %d\n", -#else - printk("Detected scsi CD-ROM sr%d at scsi%d, channel %d, id %d, lun %d\n", -#endif - sr_template.dev_noticed++, - SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); - - return 1; -} - -static int sr_attach(Scsi_Device * SDp){ - Scsi_CD * cpnt; - int i; - - if(SDp->type != TYPE_ROM && SDp->type != TYPE_WORM) return 1; - - if (sr_template.nr_dev >= sr_template.dev_max) - { - SDp->attached--; - return 1; - } - - for(cpnt = scsi_CDs, i=0; idevice) break; - - if(i >= sr_template.dev_max) panic ("scsi_devices corrupt (sr)"); - - SDp->scsi_request_fn = do_sr_request; - scsi_CDs[i].device = SDp; - sr_template.nr_dev++; - if(sr_template.nr_dev > sr_template.dev_max) - panic ("scsi_devices corrupt (sr)"); - return 0; -} - - -static void sr_init_done (Scsi_Cmnd * SCpnt) -{ - struct request * req; - - req = &SCpnt->request; - req->rq_status = RQ_SCSI_DONE; /* Busy, but indicate request done */ - - if (req->sem != NULL) { - up(req->sem); - } -} - -void get_sectorsize(int i){ - unsigned char cmd[10]; - unsigned char *buffer; - int the_result, retries; - Scsi_Cmnd * SCpnt; - - buffer = (unsigned char *) scsi_malloc(512); - SCpnt = allocate_device(NULL, scsi_CDs[i].device, 1); - - retries = 3; - do { - cmd[0] = READ_CAPACITY; - cmd[1] = (scsi_CDs[i].device->lun << 5) & 0xe0; - memset ((void *) &cmd[2], 0, 8); - SCpnt->request.rq_status = RQ_SCSI_BUSY; /* Mark as really busy */ - SCpnt->cmd_len = 0; - - memset(buffer, 0, 8); - - /* Do the command and wait.. */ - { - struct semaphore sem = MUTEX_LOCKED; - SCpnt->request.sem = &sem; - scsi_do_cmd (SCpnt, - (void *) cmd, (void *) buffer, - 512, sr_init_done, SR_TIMEOUT, - MAX_RETRIES); - down(&sem); - } - - the_result = SCpnt->result; - retries--; - - } while(the_result && retries); - - SCpnt->request.rq_status = RQ_INACTIVE; /* Mark as not busy */ - - wake_up(&SCpnt->device->device_wait); - - if (the_result) { - scsi_CDs[i].capacity = 0x1fffff; - scsi_CDs[i].sector_size = 2048; /* A guess, just in case */ - scsi_CDs[i].needs_sector_size = 1; - } else { - scsi_CDs[i].capacity = 1 + ((buffer[0] << 24) | - (buffer[1] << 16) | - (buffer[2] << 8) | - buffer[3]); - scsi_CDs[i].sector_size = (buffer[4] << 24) | - (buffer[5] << 16) | (buffer[6] << 8) | buffer[7]; - switch (scsi_CDs[i].sector_size) { - /* - * HP 4020i CD-Recorder reports 2340 byte sectors - * Philips CD-Writers report 2352 byte sectors - * - * Use 2k sectors for them.. - */ - case 0: case 2340: case 2352: - scsi_CDs[i].sector_size = 2048; - /* fall through */ - case 2048: - scsi_CDs[i].capacity *= 4; - /* fall through */ - case 512: - break; - default: -#ifdef MACH - printk ("cd%d : unsupported sector size %d.\n", - i, scsi_CDs[i].sector_size); -#else - printk ("scd%d : unsupported sector size %d.\n", - i, scsi_CDs[i].sector_size); -#endif - scsi_CDs[i].capacity = 0; - scsi_CDs[i].needs_sector_size = 1; - } - scsi_CDs[i].needs_sector_size = 0; - sr_sizes[i] = scsi_CDs[i].capacity >> (BLOCK_SIZE_BITS - 9); - }; - scsi_free(buffer, 512); -} - -static int sr_registered = 0; - -static int sr_init() -{ - int i; - - if(sr_template.dev_noticed == 0) return 0; - - if(!sr_registered) { - if (register_blkdev(MAJOR_NR,"sr",&sr_fops)) { - printk("Unable to get major %d for SCSI-CD\n",MAJOR_NR); - return 1; - } - sr_registered++; - } - - - if (scsi_CDs) return 0; - sr_template.dev_max = sr_template.dev_noticed + SR_EXTRA_DEVS; - scsi_CDs = (Scsi_CD *) scsi_init_malloc(sr_template.dev_max * sizeof(Scsi_CD), GFP_ATOMIC); - memset(scsi_CDs, 0, sr_template.dev_max * sizeof(Scsi_CD)); - - sr_sizes = (int *) scsi_init_malloc(sr_template.dev_max * sizeof(int), GFP_ATOMIC); - memset(sr_sizes, 0, sr_template.dev_max * sizeof(int)); - - sr_blocksizes = (int *) scsi_init_malloc(sr_template.dev_max * - sizeof(int), GFP_ATOMIC); - for(i=0;i> (BLOCK_SIZE_BITS - 9); - } - - - /* If our host adapter is capable of scatter-gather, then we increase - * the read-ahead to 16 blocks (32 sectors). If not, we use - * a two block (4 sector) read ahead. */ - if(scsi_CDs[0].device && scsi_CDs[0].device->host->sg_tablesize) - read_ahead[MAJOR_NR] = 32; /* 32 sector read-ahead. Always removable. */ - else - read_ahead[MAJOR_NR] = 4; /* 4 sector read-ahead */ - - return; -} - -static void sr_detach(Scsi_Device * SDp) -{ - Scsi_CD * cpnt; - int i; - - for(cpnt = scsi_CDs, i=0; idevice == SDp) { - kdev_t devi = MKDEV(MAJOR_NR, i); - - /* - * Since the cdrom is read-only, no need to sync the device. - * We should be kind to our buffer cache, however. - */ - invalidate_inodes(devi); - invalidate_buffers(devi); - - /* - * Reset things back to a sane state so that one can re-load a new - * driver (perhaps the same one). - */ - cpnt->device = NULL; - cpnt->capacity = 0; - SDp->attached--; - sr_template.nr_dev--; - sr_template.dev_noticed--; - sr_sizes[i] = 0; - return; - } - return; -} - - -#ifdef MODULE - -int init_module(void) { - sr_template.usage_count = &mod_use_count_; - return scsi_register_module(MODULE_SCSI_DEV, &sr_template); -} - -void cleanup_module( void) -{ - scsi_unregister_module(MODULE_SCSI_DEV, &sr_template); - unregister_blkdev(SCSI_CDROM_MAJOR, "sr"); - sr_registered--; - if(scsi_CDs != NULL) { - scsi_init_free((char *) scsi_CDs, - (sr_template.dev_noticed + SR_EXTRA_DEVS) - * sizeof(Scsi_CD)); - - scsi_init_free((char *) sr_sizes, sr_template.dev_max * sizeof(int)); - scsi_init_free((char *) sr_blocksizes, sr_template.dev_max * sizeof(int)); - } - - blksize_size[MAJOR_NR] = NULL; - blk_dev[MAJOR_NR].request_fn = NULL; - blk_size[MAJOR_NR] = NULL; - read_ahead[MAJOR_NR] = 0; - - sr_template.dev_max = 0; -} -#endif /* MODULE */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ diff --git a/linux/src/drivers/scsi/sr.c b/linux/src/drivers/scsi/sr.c index 446a221..8f44246 100644 --- a/linux/src/drivers/scsi/sr.c +++ b/linux/src/drivers/scsi/sr.c @@ -1005,8 +1005,12 @@ void requeue_sr_request (Scsi_Cmnd * SCpnt) static int sr_detect(Scsi_Device * SDp){ if(SDp->type != TYPE_ROM && SDp->type != TYPE_WORM) return 0; - - printk("Detected scsi CD-ROM sr%d at scsi%d, channel %d, id %d, lun %d\n", + +#ifdef MACH + printk("Detected scsi CD-ROM cd%d at scsi%d, channel %d, id %d, lun %d\n", +#else + printk("Detected scsi CD-ROM sr%d at scsi%d, channel %d, id %d, lun %d\n", +#endif sr_template.dev_noticed++, SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); @@ -1117,8 +1121,13 @@ void get_sectorsize(int i){ case 512: break; default: +#ifdef MACH + printk ("cd%d : unsupported sector size %d.\n", + i, scsi_CDs[i].sector_size); +#else printk ("scd%d : unsupported sector size %d.\n", i, scsi_CDs[i].sector_size); +#endif scsi_CDs[i].capacity = 0; scsi_CDs[i].needs_sector_size = 1; } -- cgit v1.2.3