From 75c1b0d1133a7ae6a7eb45818470f453700df1a2 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 10 May 2013 18:56:26 +0200 Subject: Add AHCI driver * linux/dev/glue/kmem.c (vmtophys): New function. * linux/dev/include/linux/mm.h (vmtophys): New prototype. * linux/src/include/linux/pci.h (PCI_CLASS_STORAGE_SATA, PCI_CLASS_STORAGE_SATA_AHCI): New macros. * linux/dev/drivers/block/ahci.c: New file. * linux/dev/include/ahci.h: New file. * linux/Makefrag.am (liblinux_a_SOURCES): Add linux/dev/drivers/block/ahci.c and linux/dev/drivers/block/ahci.h. * linux/src/drivers/block/ide.c: Include . (probe_for_hwifs): Call ahci_probe_pci. --- linux/dev/include/ahci.h | 268 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 268 insertions(+) create mode 100644 linux/dev/include/ahci.h (limited to 'linux/dev/include/ahci.h') diff --git a/linux/dev/include/ahci.h b/linux/dev/include/ahci.h new file mode 100644 index 0000000..31977b6 --- /dev/null +++ b/linux/dev/include/ahci.h @@ -0,0 +1,268 @@ +#ifndef _GNUMACH_AHCI_H +#define _GNUMACH_AHCI_H +extern void ahci_probe_pci(void); + +/* From linux 3.9's drivers/ata/ahci.h */ + +/* + * ahci.h - Common AHCI SATA definitions and declarations + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +enum { + AHCI_MAX_PORTS = 32, + AHCI_MAX_SG = 168, /* hardware max is 64K */ + AHCI_DMA_BOUNDARY = 0xffffffff, + AHCI_MAX_CMDS = 32, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, + AHCI_RX_FIS_SZ = 256, + AHCI_CMD_TBL_CDB = 0x40, + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + + AHCI_RX_FIS_SZ, + AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + + AHCI_CMD_TBL_AR_SZ + + (AHCI_RX_FIS_SZ * 16), + AHCI_IRQ_ON_SG = (1 << 31), + AHCI_CMD_ATAPI = (1 << 5), + AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), + + RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ + RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ + + /* global controller registers */ + HOST_CAP = 0x00, /* host capabilities */ + HOST_CTL = 0x04, /* global host control */ + HOST_IRQ_STAT = 0x08, /* interrupt status */ + HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ + HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + HOST_EM_LOC = 0x1c, /* Enclosure Management location */ + HOST_EM_CTL = 0x20, /* Enclosure Management Control */ + HOST_CAP2 = 0x24, /* host capabilities, extended */ + + /* HOST_CTL bits */ + HOST_RESET = (1 << 0), /* reset controller; self-clear */ + HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + + /* HOST_CAP bits */ + HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ + HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ + HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ + HOST_CAP_PART = (1 << 13), /* Partial state capable */ + HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ + HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ + HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ + HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ + HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_LED = (1 << 25), /* Supports activity LED */ + HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ + HOST_CAP_SNTF = (1 << 29), /* SNotification register */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + + /* HOST_CAP2 bits */ + HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ + HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ + HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ + HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ + HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ + HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ + + /* registers for each SATA port */ + PORT_LST_ADDR = 0x00, /* command list DMA addr */ + PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ + PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ + PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ + PORT_IRQ_STAT = 0x10, /* interrupt status */ + PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ + PORT_CMD = 0x18, /* port command */ + PORT_TFDATA = 0x20, /* taskfile data */ + PORT_SIG = 0x24, /* device TF signature */ + PORT_CMD_ISSUE = 0x38, /* command issue */ + PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ + PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ + PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ + PORT_FBS = 0x40, /* FIS-based Switching */ + PORT_DEVSLP = 0x44, /* device sleep */ + + /* PORT_IRQ_{STAT,MASK} bits */ + PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ + PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ + PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ + PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ + PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | + PORT_IRQ_UNK_FIS | + PORT_IRQ_BAD_PMP, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, + + /* PORT_CMD bits */ + PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ + PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ + PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ + PORT_CMD_PMP = (1 << 17), /* PMP attached */ + PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ + PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ + PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ + PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ + PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + + /* PORT_FBS bits */ + PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ + PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ + PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ + PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ + PORT_FBS_SDE = (1 << 2), /* FBS single device error */ + PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ + PORT_FBS_EN = (1 << 0), /* Enable FBS */ + + /* PORT_DEVSLP bits */ + PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ + PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */ + PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ + PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ + PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ + PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ + PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ + + /* hpriv->flags bits */ + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + + AHCI_HFLAG_NO_NCQ = (1 << 0), + AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ + AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ + AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ + AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ + AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ + AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ + AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ + AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as + link offline */ + AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ + AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */ + AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */ + AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on + port start (wait until + error-handling stage) */ + AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ + + /* ap->flags bits */ + + /* + AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_ACPI_SATA | ATA_FLAG_AN, + */ + + ICH_MAP = 0x90, /* ICH MAP register */ + + /* em constants */ + EM_MAX_SLOTS = 8, + EM_MAX_RETRY = 5, + + /* em_ctl bits */ + EM_CTL_RST = (1 << 9), /* Reset */ + EM_CTL_TM = (1 << 8), /* Transmit Message */ + EM_CTL_MR = (1 << 0), /* Message Received */ + EM_CTL_ALHD = (1 << 26), /* Activity LED */ + EM_CTL_XMT = (1 << 25), /* Transmit Only */ + EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ + EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */ + EM_CTL_SES = (1 << 18), /* SES-2 messages supported */ + EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */ + EM_CTL_LED = (1 << 16), /* LED messages supported */ + + /* em message type */ + EM_MSG_TYPE_LED = (1 << 0), /* LED */ + EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */ + EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */ + EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */ + + FIS_TYPE_REG_H2D = 0x27, + FIS_TYPE_REG_D2H = 0x34, + FIS_TYPE_DMA_ACT = 0x39, + FIS_TYPE_DMA_SETUP = 0x41, + FIS_TYPE_DATA = 0x46, + FIS_TYPE_BIST = 0x58, + FIS_TYPE_PIO_SETUP = 0x5F, + FIS_TYPE_DEV_BITS = 0xA1, +}; + +/* End from linux 3.9 */ + +#endif /* _GNUMACH_AHCI_H */ -- cgit v1.2.3