From b07c6b082f978e1e9944f63670467d8ed0d9ea76 Mon Sep 17 00:00:00 2001 From: Thomas Schwinge Date: Sun, 8 Oct 2006 13:38:25 +0000 Subject: 2006-10-08 Thomas Schwinge * linux/dev/drivers/scsi/sd.c: Move file... * linux/src/drivers/scsi/sd.c: ... here. --- linux/dev/drivers/scsi/sd.c | 1691 ------------------------------------------- 1 file changed, 1691 deletions(-) delete mode 100644 linux/dev/drivers/scsi/sd.c (limited to 'linux/dev/drivers/scsi') diff --git a/linux/dev/drivers/scsi/sd.c b/linux/dev/drivers/scsi/sd.c deleted file mode 100644 index d5f1524..0000000 --- a/linux/dev/drivers/scsi/sd.c +++ /dev/null @@ -1,1691 +0,0 @@ -/* - * sd.c Copyright (C) 1992 Drew Eckhardt - * Copyright (C) 1993, 1994, 1995 Eric Youngdale - * - * Linux scsi disk driver - * Initial versions: Drew Eckhardt - * Subsequent revisions: Eric Youngdale - * - * - * - * Modified by Eric Youngdale ericy@cais.com to - * add scatter-gather, multiple outstanding request, and other - * enhancements. - * - * Modified by Eric Youngdale eric@aib.com to support loadable - * low-level scsi drivers. - */ - -#include -#ifdef MODULE -/* - * This is a variable in scsi.c that is set when we are processing something - * after boot time. By definition, this is true when we are a loadable module - * ourselves. - */ -#define MODULE_FLAG 1 -#else -#define MODULE_FLAG scsi_loadable_module_flag -#endif /* MODULE */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MAJOR_NR SCSI_DISK_MAJOR -#include -#include "scsi.h" -#include "hosts.h" -#include "sd.h" -#include -#include "constants.h" - -#include - -/* - * static const char RCSid[] = "$Header:"; - */ - -#define MAX_RETRIES 5 - -/* - * Time out in seconds for disks and Magneto-opticals (which are slower). - */ - -#define SD_TIMEOUT (20 * HZ) -#define SD_MOD_TIMEOUT (25 * HZ) - -#define CLUSTERABLE_DEVICE(SC) (SC->host->use_clustering && \ - SC->device->type != TYPE_MOD) - -struct hd_struct * sd; - -Scsi_Disk * rscsi_disks = NULL; -static int * sd_sizes; -static int * sd_blocksizes; -static int * sd_hardsizes; /* Hardware sector size */ - -extern int sd_ioctl(struct inode *, struct file *, unsigned int, unsigned long); - -static int check_scsidisk_media_change(kdev_t); -static int fop_revalidate_scsidisk(kdev_t); - -static int sd_init_onedisk(int); - -static void requeue_sd_request (Scsi_Cmnd * SCpnt); - -static int sd_init(void); -static void sd_finish(void); -static int sd_attach(Scsi_Device *); -static int sd_detect(Scsi_Device *); -static void sd_detach(Scsi_Device *); - -struct Scsi_Device_Template sd_template = -{ NULL, "disk", "sd", NULL, TYPE_DISK, - SCSI_DISK_MAJOR, 0, 0, 0, 1, - sd_detect, sd_init, - sd_finish, sd_attach, sd_detach -}; - -static int sd_open(struct inode * inode, struct file * filp) -{ - int target; - target = DEVICE_NR(inode->i_rdev); - - if(target >= sd_template.dev_max || !rscsi_disks[target].device) - return -ENXIO; /* No such device */ - - /* - * Make sure that only one process can do a check_change_disk at one time. - * This is also used to lock out further access when the partition table - * is being re-read. - */ - - while (rscsi_disks[target].device->busy) - barrier(); - if(rscsi_disks[target].device->removable) { - check_disk_change(inode->i_rdev); - - /* - * If the drive is empty, just let the open fail. - */ - if ( !rscsi_disks[target].ready ) - return -ENXIO; - - /* - * Similarly, if the device has the write protect tab set, - * have the open fail if the user expects to be able to write - * to the thing. - */ - if ( (rscsi_disks[target].write_prot) && (filp->f_mode & 2) ) - return -EROFS; - } - - /* - * See if we are requesting a non-existent partition. Do this - * after checking for disk change. - */ - if(sd_sizes[MINOR(inode->i_rdev)] == 0) - return -ENXIO; - - if(rscsi_disks[target].device->removable) - if(!rscsi_disks[target].device->access_count) - sd_ioctl(inode, NULL, SCSI_IOCTL_DOORLOCK, 0); - - rscsi_disks[target].device->access_count++; - if (rscsi_disks[target].device->host->hostt->usage_count) - (*rscsi_disks[target].device->host->hostt->usage_count)++; - if(sd_template.usage_count) (*sd_template.usage_count)++; - return 0; -} - -static void sd_release(struct inode * inode, struct file * file) -{ - int target; - fsync_dev(inode->i_rdev); - - target = DEVICE_NR(inode->i_rdev); - - rscsi_disks[target].device->access_count--; - if (rscsi_disks[target].device->host->hostt->usage_count) - (*rscsi_disks[target].device->host->hostt->usage_count)--; - if(sd_template.usage_count) (*sd_template.usage_count)--; - - if(rscsi_disks[target].device->removable) { - if(!rscsi_disks[target].device->access_count) - sd_ioctl(inode, NULL, SCSI_IOCTL_DOORUNLOCK, 0); - } -} - -static void sd_geninit(struct gendisk *); - -static struct file_operations sd_fops = { - NULL, /* lseek - default */ - block_read, /* read - general block-dev read */ - block_write, /* write - general block-dev write */ - NULL, /* readdir - bad */ - NULL, /* select */ - sd_ioctl, /* ioctl */ - NULL, /* mmap */ - sd_open, /* open code */ - sd_release, /* release */ - block_fsync, /* fsync */ - NULL, /* fasync */ - check_scsidisk_media_change, /* Disk change */ - fop_revalidate_scsidisk /* revalidate */ -}; - -static struct gendisk sd_gendisk = { - MAJOR_NR, /* Major number */ - "sd", /* Major name */ - 4, /* Bits to shift to get real from partition */ - 1 << 4, /* Number of partitions per real */ - 0, /* maximum number of real */ - sd_geninit, /* init function */ - NULL, /* hd struct */ - NULL, /* block sizes */ - 0, /* number */ - NULL, /* internal */ - NULL /* next */ -}; - -static void sd_geninit (struct gendisk *ignored) -{ - int i; - - for (i = 0; i < sd_template.dev_max; ++i) - if(rscsi_disks[i].device) - sd[i << 4].nr_sects = rscsi_disks[i].capacity; -#if 0 - /* No longer needed - we keep track of this as we attach/detach */ - sd_gendisk.nr_real = sd_template.dev_max; -#endif -} - -/* - * rw_intr is the interrupt routine for the device driver. - * It will be notified on the end of a SCSI read / write, and - * will take one of several actions based on success or failure. - */ - -static void rw_intr (Scsi_Cmnd *SCpnt) -{ - int result = SCpnt->result; - int this_count = SCpnt->bufflen >> 9; - int good_sectors = (result == 0 ? this_count : 0); - int block_sectors = 1; - -#ifdef DEBUG - printk("sd%c : rw_intr(%d, %d)\n", 'a' + MINOR(SCpnt->request.rq_dev), - SCpnt->host->host_no, result); -#endif - - /* - Handle MEDIUM ERRORs that indicate partial success. Since this is a - relatively rare error condition, no care is taken to avoid unnecessary - additional work such as memcpy's that could be avoided. - */ - - if (driver_byte(result) != 0 && /* An error occurred */ - SCpnt->sense_buffer[0] == 0xF0 && /* Sense data is valid */ - SCpnt->sense_buffer[2] == MEDIUM_ERROR) - { - long error_sector = (SCpnt->sense_buffer[3] << 24) | - (SCpnt->sense_buffer[4] << 16) | - (SCpnt->sense_buffer[5] << 8) | - SCpnt->sense_buffer[6]; - int sector_size = - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].sector_size; - if (SCpnt->request.bh != NULL) - block_sectors = SCpnt->request.bh->b_size >> 9; - if (sector_size == 1024) - { - error_sector <<= 1; - if (block_sectors < 2) block_sectors = 2; - } - else if (sector_size == 256) - error_sector >>= 1; - error_sector -= sd[MINOR(SCpnt->request.rq_dev)].start_sect; - error_sector &= ~ (block_sectors - 1); - good_sectors = error_sector - SCpnt->request.sector; - if (good_sectors < 0 || good_sectors >= this_count) - good_sectors = 0; - } - - /* - * Handle RECOVERED ERRORs that indicate success after recovery action - * by the target device. - */ - - if (SCpnt->sense_buffer[0] == 0xF0 && /* Sense data is valid */ - SCpnt->sense_buffer[2] == RECOVERED_ERROR) - { - printk("scsidisk recovered I/O error: dev %s, sector %lu, absolute sector %lu\n", - kdevname(SCpnt->request.rq_dev), SCpnt->request.sector, - SCpnt->request.sector + sd[MINOR(SCpnt->request.rq_dev)].start_sect); - good_sectors = this_count; - result = 0; - } - - /* - * First case : we assume that the command succeeded. One of two things - * will happen here. Either we will be finished, or there will be more - * sectors that we were unable to read last time. - */ - - if (good_sectors > 0) { - -#ifdef DEBUG - printk("sd%c : %d sectors remain.\n", 'a' + MINOR(SCpnt->request.rq_dev), - SCpnt->request.nr_sectors); - printk("use_sg is %d\n ",SCpnt->use_sg); -#endif - if (SCpnt->use_sg) { - struct scatterlist * sgpnt; - int i; - sgpnt = (struct scatterlist *) SCpnt->buffer; - for(i=0; iuse_sg; i++) { -#ifdef DEBUG - printk(":%x %x %d\n",sgpnt[i].alt_address, sgpnt[i].address, - sgpnt[i].length); -#endif - if (sgpnt[i].alt_address) { - if (SCpnt->request.cmd == READ) - memcpy(sgpnt[i].alt_address, sgpnt[i].address, - sgpnt[i].length); - scsi_free(sgpnt[i].address, sgpnt[i].length); - } - } - - /* Free list of scatter-gather pointers */ - scsi_free(SCpnt->buffer, SCpnt->sglist_len); - } else { - if (SCpnt->buffer != SCpnt->request.buffer) { -#ifdef DEBUG - printk("nosg: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer, - SCpnt->bufflen); -#endif - if (SCpnt->request.cmd == READ) - memcpy(SCpnt->request.buffer, SCpnt->buffer, - SCpnt->bufflen); - scsi_free(SCpnt->buffer, SCpnt->bufflen); - } - } - /* - * If multiple sectors are requested in one buffer, then - * they will have been finished off by the first command. - * If not, then we have a multi-buffer command. - */ - if (SCpnt->request.nr_sectors > this_count) - { - SCpnt->request.errors = 0; - - if (!SCpnt->request.bh) - { -#ifdef DEBUG - printk("sd%c : handling page request, no buffer\n", - 'a' + MINOR(SCpnt->request.rq_dev)); -#endif - /* - * The SCpnt->request.nr_sectors field is always done in - * 512 byte sectors, even if this really isn't the case. - */ - panic("sd.c: linked page request (%lx %x)", - SCpnt->request.sector, this_count); - } - } - SCpnt = end_scsi_request(SCpnt, 1, good_sectors); - if (result == 0) - { - requeue_sd_request(SCpnt); - return; - } - } - - if (good_sectors == 0) { - - /* Free up any indirection buffers we allocated for DMA purposes. */ - if (SCpnt->use_sg) { - struct scatterlist * sgpnt; - int i; - sgpnt = (struct scatterlist *) SCpnt->buffer; - for(i=0; iuse_sg; i++) { -#ifdef DEBUG - printk("err: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer, - SCpnt->bufflen); -#endif - if (sgpnt[i].alt_address) { - scsi_free(sgpnt[i].address, sgpnt[i].length); - } - } - scsi_free(SCpnt->buffer, SCpnt->sglist_len); /* Free list of scatter-gather pointers */ - } else { -#ifdef DEBUG - printk("nosgerr: %x %x %d\n",SCpnt->request.buffer, SCpnt->buffer, - SCpnt->bufflen); -#endif - if (SCpnt->buffer != SCpnt->request.buffer) - scsi_free(SCpnt->buffer, SCpnt->bufflen); - } - } - - /* - * Now, if we were good little boys and girls, Santa left us a request - * sense buffer. We can extract information from this, so we - * can choose a block to remap, etc. - */ - - if (driver_byte(result) != 0) { - if (suggestion(result) == SUGGEST_REMAP) { -#ifdef REMAP - /* - * Not yet implemented. A read will fail after being remapped, - * a write will call the strategy routine again. - */ - if rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].remap - { - result = 0; - } - else -#endif - } - - if ((SCpnt->sense_buffer[0] & 0x7f) == 0x70) { - if ((SCpnt->sense_buffer[2] & 0xf) == UNIT_ATTENTION) { - if(rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->removable) { - /* detected disc change. set a bit and quietly refuse - * further access. - */ - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->changed = 1; - SCpnt = end_scsi_request(SCpnt, 0, this_count); - requeue_sd_request(SCpnt); - return; - } - else - { - /* - * Must have been a power glitch, or a bus reset. - * Could not have been a media change, so we just retry - * the request and see what happens. - */ - requeue_sd_request(SCpnt); - return; - } - } - } - - - /* If we had an ILLEGAL REQUEST returned, then we may have - * performed an unsupported command. The only thing this should be - * would be a ten byte read where only a six byte read was supported. - * Also, on a system where READ CAPACITY failed, we have read past - * the end of the disk. - */ - - if (SCpnt->sense_buffer[2] == ILLEGAL_REQUEST) { - if (rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].ten) { - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].ten = 0; - requeue_sd_request(SCpnt); - result = 0; - } else { - /* ???? */ - } - } - - if (SCpnt->sense_buffer[2] == MEDIUM_ERROR) { - printk("scsi%d: MEDIUM ERROR on channel %d, id %d, lun %d, CDB: ", - SCpnt->host->host_no, (int) SCpnt->channel, - (int) SCpnt->target, (int) SCpnt->lun); - print_command(SCpnt->cmnd); - print_sense("sd", SCpnt); - SCpnt = end_scsi_request(SCpnt, 0, block_sectors); - requeue_sd_request(SCpnt); - return; - } - } /* driver byte != 0 */ - if (result) { - printk("SCSI disk error : host %d channel %d id %d lun %d return code = %x\n", - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->host->host_no, - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->channel, - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->id, - rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->lun, result); - - if (driver_byte(result) & DRIVER_SENSE) - print_sense("sd", SCpnt); - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.current_nr_sectors); - requeue_sd_request(SCpnt); - return; - } -} - -/* - * requeue_sd_request() is the request handler function for the sd driver. - * Its function in life is to take block device requests, and translate - * them to SCSI commands. - */ - -static void do_sd_request (void) -{ - Scsi_Cmnd * SCpnt = NULL; - Scsi_Device * SDev; - struct request * req = NULL; - unsigned long flags; - int flag = 0; - - save_flags(flags); - while (1==1){ - cli(); - if (CURRENT != NULL && CURRENT->rq_status == RQ_INACTIVE) { - restore_flags(flags); - return; - } - - INIT_SCSI_REQUEST; - SDev = rscsi_disks[DEVICE_NR(CURRENT->rq_dev)].device; - - /* - * I am not sure where the best place to do this is. We need - * to hook in a place where we are likely to come if in user - * space. - */ - if( SDev->was_reset ) - { - /* - * We need to relock the door, but we might - * be in an interrupt handler. Only do this - * from user space, since we do not want to - * sleep from an interrupt. - */ - if( SDev->removable && !intr_count ) - { - scsi_ioctl(SDev, SCSI_IOCTL_DOORLOCK, 0); - /* scsi_ioctl may allow CURRENT to change, so start over. */ - SDev->was_reset = 0; - continue; - } - SDev->was_reset = 0; - } - - /* We have to be careful here. allocate_device will get a free pointer, - * but there is no guarantee that it is queueable. In normal usage, - * we want to call this, because other types of devices may have the - * host all tied up, and we want to make sure that we have at least - * one request pending for this type of device. We can also come - * through here while servicing an interrupt, because of the need to - * start another command. If we call allocate_device more than once, - * then the system can wedge if the command is not queueable. The - * request_queueable function is safe because it checks to make sure - * that the host is able to take another command before it returns - * a pointer. - */ - - if (flag++ == 0) - SCpnt = allocate_device(&CURRENT, - rscsi_disks[DEVICE_NR(CURRENT->rq_dev)].device, 0); - else SCpnt = NULL; - - /* - * The following restore_flags leads to latency problems. FIXME. - * Using a "sti()" gets rid of the latency problems but causes - * race conditions and crashes. - */ - restore_flags(flags); - - /* This is a performance enhancement. We dig down into the request - * list and try to find a queueable request (i.e. device not busy, - * and host able to accept another command. If we find one, then we - * queue it. This can make a big difference on systems with more than - * one disk drive. We want to have the interrupts off when monkeying - * with the request list, because otherwise the kernel might try to - * slip in a request in between somewhere. - */ - - if (!SCpnt && sd_template.nr_dev > 1){ - struct request *req1; - req1 = NULL; - cli(); - req = CURRENT; - while(req){ - SCpnt = request_queueable(req, - rscsi_disks[DEVICE_NR(req->rq_dev)].device); - if(SCpnt) break; - req1 = req; - req = req->next; - } - if (SCpnt && req->rq_status == RQ_INACTIVE) { - if (req == CURRENT) - CURRENT = CURRENT->next; - else - req1->next = req->next; - } - restore_flags(flags); - } - - if (!SCpnt) return; /* Could not find anything to do */ - - /* Queue command */ - requeue_sd_request(SCpnt); - } /* While */ -} - -static void requeue_sd_request (Scsi_Cmnd * SCpnt) -{ - int dev, devm, block, this_count; - unsigned char cmd[10]; - int bounce_size, contiguous; - int max_sg; - struct buffer_head * bh, *bhp; - char * buff, *bounce_buffer; - - repeat: - - if(!SCpnt || SCpnt->request.rq_status == RQ_INACTIVE) { - do_sd_request(); - return; - } - - devm = MINOR(SCpnt->request.rq_dev); - dev = DEVICE_NR(SCpnt->request.rq_dev); - - block = SCpnt->request.sector; - this_count = 0; - -#ifdef DEBUG - printk("Doing sd request, dev = %d, block = %d\n", devm, block); -#endif - - if (devm >= (sd_template.dev_max << 4) || - !rscsi_disks[dev].device || - block + SCpnt->request.nr_sectors > sd[devm].nr_sects) - { - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - goto repeat; - } - - block += sd[devm].start_sect; - - if (rscsi_disks[dev].device->changed) - { - /* - * quietly refuse to do anything to a changed disc until the changed - * bit has been reset - */ - /* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */ - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - goto repeat; - } - -#ifdef DEBUG - printk("sd%c : real dev = /dev/sd%c, block = %d\n", - 'a' + devm, dev, block); -#endif - - /* - * If we have a 1K hardware sectorsize, prevent access to single - * 512 byte sectors. In theory we could handle this - in fact - * the scsi cdrom driver must be able to handle this because - * we typically use 1K blocksizes, and cdroms typically have - * 2K hardware sectorsizes. Of course, things are simpler - * with the cdrom, since it is read-only. For performance - * reasons, the filesystems should be able to handle this - * and not force the scsi disk driver to use bounce buffers - * for this. - */ - if (rscsi_disks[dev].sector_size == 1024) - if((block & 1) || (SCpnt->request.nr_sectors & 1)) { - printk("sd.c:Bad block number requested"); - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - goto repeat; - } - - switch (SCpnt->request.cmd) - { - case WRITE : - if (!rscsi_disks[dev].device->writeable) - { - SCpnt = end_scsi_request(SCpnt, 0, SCpnt->request.nr_sectors); - goto repeat; - } - cmd[0] = WRITE_6; - break; - case READ : - cmd[0] = READ_6; - break; - default : - panic ("Unknown sd command %d\n", SCpnt->request.cmd); - } - - SCpnt->this_count = 0; - - /* If the host adapter can deal with very large scatter-gather - * requests, it is a waste of time to cluster - */ - contiguous = (!CLUSTERABLE_DEVICE(SCpnt) ? 0 :1); - bounce_buffer = NULL; - bounce_size = (SCpnt->request.nr_sectors << 9); - - /* First see if we need a bounce buffer for this request. If we do, make - * sure that we can allocate a buffer. Do not waste space by allocating - * a bounce buffer if we are straddling the 16Mb line - */ - if (contiguous && SCpnt->request.bh && - ((long) SCpnt->request.bh->b_data) - + (SCpnt->request.nr_sectors << 9) - 1 > ISA_DMA_THRESHOLD - && SCpnt->host->unchecked_isa_dma) { - if(((long) SCpnt->request.bh->b_data) > ISA_DMA_THRESHOLD) - bounce_buffer = (char *) scsi_malloc(bounce_size); - if(!bounce_buffer) contiguous = 0; - } - - if(contiguous && SCpnt->request.bh && SCpnt->request.bh->b_reqnext) - for(bh = SCpnt->request.bh, bhp = bh->b_reqnext; bhp; bh = bhp, - bhp = bhp->b_reqnext) { - if(!CONTIGUOUS_BUFFERS(bh,bhp)) { - if(bounce_buffer) scsi_free(bounce_buffer, bounce_size); - contiguous = 0; - break; - } - } - if (!SCpnt->request.bh || contiguous) { - - /* case of page request (i.e. raw device), or unlinked buffer */ - this_count = SCpnt->request.nr_sectors; - buff = SCpnt->request.buffer; - SCpnt->use_sg = 0; - - } else if (SCpnt->host->sg_tablesize == 0 || - (need_isa_buffer && dma_free_sectors <= 10)) { - - /* Case of host adapter that cannot scatter-gather. We also - * come here if we are running low on DMA buffer memory. We set - * a threshold higher than that we would need for this request so - * we leave room for other requests. Even though we would not need - * it all, we need to be conservative, because if we run low enough - * we have no choice but to panic. - */ - if (SCpnt->host->sg_tablesize != 0 && - need_isa_buffer && - dma_free_sectors <= 10) - printk("Warning: SCSI DMA buffer space running low. Using non scatter-gather I/O.\n"); - - this_count = SCpnt->request.current_nr_sectors; - buff = SCpnt->request.buffer; - SCpnt->use_sg = 0; - - } else { - - /* Scatter-gather capable host adapter */ - struct scatterlist * sgpnt; - int count, this_count_max; - int counted; - - bh = SCpnt->request.bh; - this_count = 0; - this_count_max = (rscsi_disks[dev].ten ? 0xffff : 0xff); - count = 0; - bhp = NULL; - while(bh) { - if ((this_count + (bh->b_size >> 9)) > this_count_max) break; - if(!bhp || !CONTIGUOUS_BUFFERS(bhp,bh) || - !CLUSTERABLE_DEVICE(SCpnt) || - (SCpnt->host->unchecked_isa_dma && - ((unsigned long) bh->b_data-1) == ISA_DMA_THRESHOLD)) { - if (count < SCpnt->host->sg_tablesize) count++; - else break; - } - this_count += (bh->b_size >> 9); - bhp = bh; - bh = bh->b_reqnext; - } -#if 0 - if(SCpnt->host->unchecked_isa_dma && - ((unsigned int) SCpnt->request.bh->b_data-1) == ISA_DMA_THRESHOLD) count--; -#endif - SCpnt->use_sg = count; /* Number of chains */ - /* scsi_malloc can only allocate in chunks of 512 bytes */ - count = (SCpnt->use_sg * sizeof(struct scatterlist) + 511) & ~511; - - SCpnt->sglist_len = count; - max_sg = count / sizeof(struct scatterlist); - if(SCpnt->host->sg_tablesize < max_sg) - max_sg = SCpnt->host->sg_tablesize; - sgpnt = (struct scatterlist * ) scsi_malloc(count); - if (!sgpnt) { - printk("Warning - running *really* short on DMA buffers\n"); - SCpnt->use_sg = 0; /* No memory left - bail out */ - this_count = SCpnt->request.current_nr_sectors; - buff = SCpnt->request.buffer; - } else { - memset(sgpnt, 0, count); /* Zero so it is easy to fill, but only - * if memory is available - */ - buff = (char *) sgpnt; - counted = 0; - for(count = 0, bh = SCpnt->request.bh, bhp = bh->b_reqnext; - count < SCpnt->use_sg && bh; - count++, bh = bhp) { - - bhp = bh->b_reqnext; - - if(!sgpnt[count].address) sgpnt[count].address = bh->b_data; - sgpnt[count].length += bh->b_size; - counted += bh->b_size >> 9; - - if (((long) sgpnt[count].address) + sgpnt[count].length - 1 > - ISA_DMA_THRESHOLD && (SCpnt->host->unchecked_isa_dma) && - !sgpnt[count].alt_address) { - sgpnt[count].alt_address = sgpnt[count].address; - /* We try to avoid exhausting the DMA pool, since it is - * easier to control usage here. In other places we might - * have a more pressing need, and we would be screwed if - * we ran out */ - if(dma_free_sectors < (sgpnt[count].length >> 9) + 10) { - sgpnt[count].address = NULL; - } else { - sgpnt[count].address = - (char *) scsi_malloc(sgpnt[count].length); - } - /* If we start running low on DMA buffers, we abort the - * scatter-gather operation, and free all of the memory - * we have allocated. We want to ensure that all scsi - * operations are able to do at least a non-scatter/gather - * operation */ - if(sgpnt[count].address == NULL){ /* Out of dma memory */ -#if 0 - printk("Warning: Running low on SCSI DMA buffers"); - /* Try switching back to a non s-g operation. */ - while(--count >= 0){ - if(sgpnt[count].alt_address) - scsi_free(sgpnt[count].address, - sgpnt[count].length); - } - this_count = SCpnt->request.current_nr_sectors; - buff = SCpnt->request.buffer; - SCpnt->use_sg = 0; - scsi_free(sgpnt, SCpnt->sglist_len); -#endif - SCpnt->use_sg = count; - this_count = counted -= bh->b_size >> 9; - break; - } - } - - /* Only cluster buffers if we know that we can supply DMA - * buffers large enough to satisfy the request. Do not cluster - * a new request if this would mean that we suddenly need to - * start using DMA bounce buffers */ - if(bhp && CONTIGUOUS_BUFFERS(bh,bhp) - && CLUSTERABLE_DEVICE(SCpnt)) { - char * tmp; - - if (((long) sgpnt[count].address) + sgpnt[count].length + - bhp->b_size - 1 > ISA_DMA_THRESHOLD && - (SCpnt->host->unchecked_isa_dma) && - !sgpnt[count].alt_address) continue; - - if(!sgpnt[count].alt_address) {count--; continue; } - if(dma_free_sectors > 10) - tmp = (char *) scsi_malloc(sgpnt[count].length - + bhp->b_size); - else { - tmp = NULL; - max_sg = SCpnt->use_sg; - } - if(tmp){ - scsi_free(sgpnt[count].address, sgpnt[count].length); - sgpnt[count].address = tmp; - count--; - continue; - } - - /* If we are allowed another sg chain, then increment - * counter so we can insert it. Otherwise we will end - up truncating */ - - if (SCpnt->use_sg < max_sg) SCpnt->use_sg++; - } /* contiguous buffers */ - } /* for loop */ - - /* This is actually how many we are going to transfer */ - this_count = counted; - - if(count < SCpnt->use_sg || SCpnt->use_sg - > SCpnt->host->sg_tablesize){ - bh = SCpnt->request.bh; - printk("Use sg, count %d %x %d\n", - SCpnt->use_sg, count, dma_free_sectors); - printk("maxsg = %x, counted = %d this_count = %d\n", - max_sg, counted, this_count); - while(bh){ - printk("[%p %lx] ", bh->b_data, bh->b_size); - bh = bh->b_reqnext; - } - if(SCpnt->use_sg < 16) - for(count=0; countuse_sg; count++) - printk("{%d:%p %p %d} ", count, - sgpnt[count].address, - sgpnt[count].alt_address, - sgpnt[count].length); - panic("Ooops"); - } - - if (SCpnt->request.cmd == WRITE) - for(count=0; countuse_sg; count++) - if(sgpnt[count].alt_address) - memcpy(sgpnt[count].address, sgpnt[count].alt_address, - sgpnt[count].length); - } /* Able to malloc sgpnt */ - } /* Host adapter capable of scatter-gather */ - - /* Now handle the possibility of DMA to addresses > 16Mb */ - - if(SCpnt->use_sg == 0){ - if (((long) buff) + (this_count << 9) - 1 > ISA_DMA_THRESHOLD && - (SCpnt->host->unchecked_isa_dma)) { - if(bounce_buffer) - buff = bounce_buffer; - else - buff = (char *) scsi_malloc(this_count << 9); - if(buff == NULL) { /* Try backing off a bit if we are low on mem*/ - this_count = SCpnt->request.current_nr_sectors; - buff = (char *) scsi_malloc(this_count << 9); - if(!buff) panic("Ran out of DMA buffers."); - } - if (SCpnt->request.cmd == WRITE) - memcpy(buff, (char *)SCpnt->request.buffer, this_count << 9); - } - } -#ifdef DEBUG - printk("sd%c : %s %d/%d 512 byte blocks.\n", - 'a' + devm, - (SCpnt->request.cmd == WRITE) ? "writing" : "reading", - this_count, SCpnt->request.nr_sectors); -#endif - - cmd[1] = (SCpnt->lun << 5) & 0xe0; - - if (rscsi_disks[dev].sector_size == 1024){ - if(block & 1) panic("sd.c:Bad block number requested"); - if(this_count & 1) panic("sd.c:Bad block number requested"); - block = block >> 1; - this_count = this_count >> 1; - } - - if (rscsi_disks[dev].sector_size == 256){ - block = block << 1; - this_count = this_count << 1; - } - - if (((this_count > 0xff) || (block > 0x1fffff)) && rscsi_disks[dev].ten) - { - if (this_count > 0xffff) - this_count = 0xffff; - - cmd[0] += READ_10 - READ_6 ; - cmd[2] = (unsigned char) (block >> 24) & 0xff; - cmd[3] = (unsigned char) (block >> 16) & 0xff; - cmd[4] = (unsigned char) (block >> 8) & 0xff; - cmd[5] = (unsigned char) block & 0xff; - cmd[6] = cmd[9] = 0; - cmd[7] = (unsigned char) (this_count >> 8) & 0xff; - cmd[8] = (unsigned char) this_count & 0xff; - } - else - { - if (this_count > 0xff) - this_count = 0xff; - - cmd[1] |= (unsigned char) ((block >> 16) & 0x1f); - cmd[2] = (unsigned char) ((block >> 8) & 0xff); - cmd[3] = (unsigned char) block & 0xff; - cmd[4] = (unsigned char) this_count; - cmd[5] = 0; - } - - /* - * We shouldn't disconnect in the middle of a sector, so with a dumb - * host adapter, it's safe to assume that we can at least transfer - * this many bytes between each connect / disconnect. - */ - - SCpnt->transfersize = rscsi_disks[dev].sector_size; - SCpnt->underflow = this_count << 9; - scsi_do_cmd (SCpnt, (void *) cmd, buff, - this_count * rscsi_disks[dev].sector_size, - rw_intr, - (SCpnt->device->type == TYPE_DISK ? - SD_TIMEOUT : SD_MOD_TIMEOUT), - MAX_RETRIES); -} - -static int check_scsidisk_media_change(kdev_t full_dev){ - int retval; - int target; - struct inode inode; - int flag = 0; - - target = DEVICE_NR(full_dev); - - if (target >= sd_template.dev_max || - !rscsi_disks[target].device) { - printk("SCSI disk request error: invalid device.\n"); - return 0; - } - - if(!rscsi_disks[target].device->removable) return 0; - - inode.i_rdev = full_dev; /* This is all we really need here */ - - /* Using Start/Stop enables differentiation between drive with - * no cartridge loaded - NOT READY, drive with changed cartridge - - * UNIT ATTENTION, or with same cartridge - GOOD STATUS. - * This also handles drives that auto spin down. eg iomega jaz 1GB - * as this will spin up the drive. - */ - retval = sd_ioctl(&inode, NULL, SCSI_IOCTL_START_UNIT, 0); - - if(retval){ /* Unable to test, unit probably not ready. This usually - * means there is no disc in the drive. Mark as changed, - * and we will figure it out later once the drive is - * available again. */ - - rscsi_disks[target].ready = 0; - rscsi_disks[target].device->changed = 1; - return 1; /* This will force a flush, if called from - * check_disk_change */ - } - - /* - * for removable scsi disk ( FLOPTICAL ) we have to recognise the - * presence of disk in the drive. This is kept in the Scsi_Disk - * struct and tested at open ! Daniel Roche ( dan@lectra.fr ) - */ - - rscsi_disks[target].ready = 1; /* FLOPTICAL */ - - retval = rscsi_disks[target].device->changed; - if(!flag) rscsi_disks[target].device->changed = 0; - return retval; -} - -static void sd_init_done (Scsi_Cmnd * SCpnt) -{ - struct request * req; - - req = &SCpnt->request; - req->rq_status = RQ_SCSI_DONE; /* Busy, but indicate request done */ - - if (req->sem != NULL) { - up(req->sem); - } -} - -static int sd_init_onedisk(int i) -{ - unsigned char cmd[10]; - unsigned char *buffer; - unsigned long spintime; - int the_result, retries; - Scsi_Cmnd * SCpnt; - - /* We need to retry the READ_CAPACITY because a UNIT_ATTENTION is - * considered a fatal error, and many devices report such an error - * just after a scsi bus reset. - */ - - SCpnt = allocate_device(NULL, rscsi_disks[i].device, 1); - buffer = (unsigned char *) scsi_malloc(512); - - spintime = 0; - - /* Spin up drives, as required. Only do this at boot time */ - /* Spinup needs to be done for module loads too. */ - do{ - retries = 0; - while(retries < 3) - { - cmd[0] = TEST_UNIT_READY; - cmd[1] = (rscsi_disks[i].device->lun << 5) & 0xe0; - memset ((void *) &cmd[2], 0, 8); - SCpnt->cmd_len = 0; - SCpnt->sense_buffer[0] = 0; - SCpnt->sense_buffer[2] = 0; - - { - struct semaphore sem = MUTEX_LOCKED; - /* Mark as really busy again */ - SCpnt->request.rq_status = RQ_SCSI_BUSY; - SCpnt->request.sem = &sem; - scsi_do_cmd (SCpnt, - (void *) cmd, (void *) buffer, - 512, sd_init_done, SD_TIMEOUT, - MAX_RETRIES); - down(&sem); - } - - the_result = SCpnt->result; - retries++; - if( the_result == 0 - || SCpnt->sense_buffer[2] != UNIT_ATTENTION) - break; - } - - /* Look for non-removable devices that return NOT_READY. - * Issue command to spin up drive for these cases. */ - if(the_result && !rscsi_disks[i].device->removable && - SCpnt->sense_buffer[2] == NOT_READY) { - unsigned long time1; - if(!spintime){ -#ifdef MACH - printk( "sd%d: Spinning up disk...", i); -#else - printk( "sd%c: Spinning up disk...", 'a' + i ); -#endif - cmd[0] = START_STOP; - cmd[1] = (rscsi_disks[i].device->lun << 5) & 0xe0; - cmd[1] |= 1; /* Return immediately */ - memset ((void *) &cmd[2], 0, 8); - cmd[4] = 1; /* Start spin cycle */ - SCpnt->cmd_len = 0; - SCpnt->sense_buffer[0] = 0; - SCpnt->sense_buffer[2] = 0; - - { - struct semaphore sem = MUTEX_LOCKED; - /* Mark as really busy again */ - SCpnt->request.rq_status = RQ_SCSI_BUSY; - SCpnt->request.sem = &sem; - scsi_do_cmd (SCpnt, - (void *) cmd, (void *) buffer, - 512, sd_init_done, SD_TIMEOUT, - MAX_RETRIES); - down(&sem); - } - - spintime = jiffies; - } - - time1 = jiffies + HZ; - while(jiffies < time1); /* Wait 1 second for next try */ - printk( "." ); - } - } while(the_result && spintime && spintime+100*HZ > jiffies); - if (spintime) { - if (the_result) - printk( "not responding...\n" ); - else - printk( "ready\n" ); - } - - retries = 3; - do { - cmd[0] = READ_CAPACITY; - cmd[1] = (rscsi_disks[i].device->lun << 5) & 0xe0; - memset ((void *) &cmd[2], 0, 8); - memset ((void *) buffer, 0, 8); - SCpnt->cmd_len = 0; - SCpnt->sense_buffer[0] = 0; - SCpnt->sense_buffer[2] = 0; - - { - struct semaphore sem = MUTEX_LOCKED; - /* Mark as really busy again */ - SCpnt->request.rq_status = RQ_SCSI_BUSY; - SCpnt->request.sem = &sem; - scsi_do_cmd (SCpnt, - (void *) cmd, (void *) buffer, - 8, sd_init_done, SD_TIMEOUT, - MAX_RETRIES); - down(&sem); /* sleep until it is ready */ - } - - the_result = SCpnt->result; - retries--; - - } while(the_result && retries); - - SCpnt->request.rq_status = RQ_INACTIVE; /* Mark as not busy */ - - wake_up(&SCpnt->device->device_wait); - - /* Wake up a process waiting for device */ - - /* - * The SCSI standard says: - * "READ CAPACITY is necessary for self configuring software" - * While not mandatory, support of READ CAPACITY is strongly encouraged. - * We used to die if we couldn't successfully do a READ CAPACITY. - * But, now we go on about our way. The side effects of this are - * - * 1. We can't know block size with certainty. I have said "512 bytes - * is it" as this is most common. - * - * 2. Recovery from when some one attempts to read past the end of the - * raw device will be slower. - */ - - if (the_result) - { -#ifdef MACH - printk ("sd%d : READ CAPACITY failed.\n" - "sd%d : status = %x, message = %02x, host = %d, driver = %02x \n", - i, i, -#else - printk ("sd%c : READ CAPACITY failed.\n" - "sd%c : status = %x, message = %02x, host = %d, driver = %02x \n", - 'a' + i, 'a' + i, -#endif - status_byte(the_result), - msg_byte(the_result), - host_byte(the_result), - driver_byte(the_result) - ); - if (driver_byte(the_result) & DRIVER_SENSE) -#ifdef MACH - printk("sd%d : extended sense code = %1x \n", - i, SCpnt->sense_buffer[2] & 0xf); -#else - printk("sd%c : extended sense code = %1x \n", - 'a' + i, SCpnt->sense_buffer[2] & 0xf); -#endif - else -#ifdef MACH - printk("sd%d : sense not available. \n", i); -#else - printk("sd%c : sense not available. \n", 'a' + i); -#endif - -#ifdef MACH - printk("sd%d : block size assumed to be 512 bytes, disk size 1GB. \n", - i); -#else - printk("sd%c : block size assumed to be 512 bytes, disk size 1GB. \n", - 'a' + i); -#endif - rscsi_disks[i].capacity = 0x1fffff; - rscsi_disks[i].sector_size = 512; - - /* Set dirty bit for removable devices if not ready - sometimes drives - * will not report this properly. */ - if(rscsi_disks[i].device->removable && - SCpnt->sense_buffer[2] == NOT_READY) - rscsi_disks[i].device->changed = 1; - - } - else - { - /* - * FLOPTICAL , if read_capa is ok , drive is assumed to be ready - */ - rscsi_disks[i].ready = 1; - - rscsi_disks[i].capacity = 1 + ((buffer[0] << 24) | - (buffer[1] << 16) | - (buffer[2] << 8) | - buffer[3]); - - rscsi_disks[i].sector_size = (buffer[4] << 24) | - (buffer[5] << 16) | (buffer[6] << 8) | buffer[7]; - - if (rscsi_disks[i].sector_size == 0) { - rscsi_disks[i].sector_size = 512; -#ifdef MACH - printk("sd%d : sector size 0 reported, assuming 512.\n", i); -#else - printk("sd%c : sector size 0 reported, assuming 512.\n", 'a' + i); -#endif - } - - - if (rscsi_disks[i].sector_size != 512 && - rscsi_disks[i].sector_size != 1024 && - rscsi_disks[i].sector_size != 256) - { -#ifdef MACH - printk ("sd%d : unsupported sector size %d.\n", - i, rscsi_disks[i].sector_size); -#else - printk ("sd%c : unsupported sector size %d.\n", - 'a' + i, rscsi_disks[i].sector_size); -#endif - if(rscsi_disks[i].device->removable){ - rscsi_disks[i].capacity = 0; - } else { - printk ("scsi : deleting disk entry.\n"); - rscsi_disks[i].device = NULL; - sd_template.nr_dev--; - sd_gendisk.nr_real--; - return i; - } - } - { - /* - * The msdos fs needs to know the hardware sector size - * So I have created this table. See ll_rw_blk.c - * Jacques Gelinas (Jacques@solucorp.qc.ca) - */ - int m, mb; - int sz_quot, sz_rem; - int hard_sector = rscsi_disks[i].sector_size; - /* There are 16 minors allocated for each major device */ - for (m=i<<4; m<((i+1)<<4); m++){ - sd_hardsizes[m] = hard_sector; - } - mb = rscsi_disks[i].capacity / 1024 * hard_sector / 1024; - /* sz = div(m/100, 10); this seems to not be in the libr */ - m = (mb + 50) / 100; - sz_quot = m / 10; - sz_rem = m - (10 * sz_quot); -#ifdef MACH - printk ("SCSI device sd%d: hdwr sector= %d bytes." - " Sectors= %d [%d MB] [%d.%1d GB]\n", - i, hard_sector, rscsi_disks[i].capacity, - mb, sz_quot, sz_rem); -#else - printk ("SCSI device sd%c: hdwr sector= %d bytes." - " Sectors= %d [%d MB] [%d.%1d GB]\n", - i+'a', hard_sector, rscsi_disks[i].capacity, - mb, sz_quot, sz_rem); -#endif - } - if(rscsi_disks[i].sector_size == 1024) - rscsi_disks[i].capacity <<= 1; /* Change into 512 byte sectors */ - if(rscsi_disks[i].sector_size == 256) - rscsi_disks[i].capacity >>= 1; /* Change into 512 byte sectors */ - } - - - /* - * Unless otherwise specified, this is not write protected. - */ - rscsi_disks[i].write_prot = 0; - if ( rscsi_disks[i].device->removable && rscsi_disks[i].ready ) { - /* FLOPTICAL */ - - /* - * for removable scsi disk ( FLOPTICAL ) we have to recognise - * the Write Protect Flag. This flag is kept in the Scsi_Disk struct - * and tested at open ! - * Daniel Roche ( dan@lectra.fr ) - */ - - memset ((void *) &cmd[0], 0, 8); - cmd[0] = MODE_SENSE; - cmd[1] = (rscsi_disks[i].device->lun << 5) & 0xe0; - cmd[2] = 1; /* page code 1 ?? */ - cmd[4] = 12; - SCpnt->cmd_len = 0; - SCpnt->sense_buffer[0] = 0; - SCpnt->sense_buffer[2] = 0; - - /* same code as READCAPA !! */ - { - struct semaphore sem = MUTEX_LOCKED; - SCpnt->request.rq_status = RQ_SCSI_BUSY; /* Mark as really busy again */ - SCpnt->request.sem = &sem; - scsi_do_cmd (SCpnt, - (void *) cmd, (void *) buffer, - 512, sd_init_done, SD_TIMEOUT, - MAX_RETRIES); - down(&sem); - } - - the_result = SCpnt->result; - SCpnt->request.rq_status = RQ_INACTIVE; /* Mark as not busy */ - wake_up(&SCpnt->device->device_wait); - - if ( the_result ) { -#ifdef MACH - printk ("sd%d: test WP failed, assume Write Protected\n",i); -#else - printk ("sd%c: test WP failed, assume Write Protected\n",i+'a'); -#endif - rscsi_disks[i].write_prot = 1; - } else { - rscsi_disks[i].write_prot = ((buffer[2] & 0x80) != 0); -#ifdef MACH - printk ("sd%d: Write Protect is %s\n",i, - rscsi_disks[i].write_prot ? "on" : "off"); -#else - printk ("sd%c: Write Protect is %s\n",i+'a', - rscsi_disks[i].write_prot ? "on" : "off"); -#endif - } - - } /* check for write protect */ - - rscsi_disks[i].ten = 1; - rscsi_disks[i].remap = 1; - scsi_free(buffer, 512); - return i; -} - -/* - * The sd_init() function looks at all SCSI drives present, determines - * their size, and reads partition table entries for them. - */ - -static int sd_registered = 0; - -static int sd_init() -{ - int i; - - if (sd_template.dev_noticed == 0) return 0; - - if(!sd_registered) { - if (register_blkdev(MAJOR_NR,"sd",&sd_fops)) { - printk("Unable to get major %d for SCSI disk\n",MAJOR_NR); - return 1; - } - sd_registered++; - } - - /* We do not support attaching loadable devices yet. */ - if(rscsi_disks) return 0; - - sd_template.dev_max = sd_template.dev_noticed + SD_EXTRA_DEVS; - - rscsi_disks = (Scsi_Disk *) - scsi_init_malloc(sd_template.dev_max * sizeof(Scsi_Disk), GFP_ATOMIC); - memset(rscsi_disks, 0, sd_template.dev_max * sizeof(Scsi_Disk)); - - sd_sizes = (int *) scsi_init_malloc((sd_template.dev_max << 4) * - sizeof(int), GFP_ATOMIC); - memset(sd_sizes, 0, (sd_template.dev_max << 4) * sizeof(int)); - - sd_blocksizes = (int *) scsi_init_malloc((sd_template.dev_max << 4) * - sizeof(int), GFP_ATOMIC); - - sd_hardsizes = (int *) scsi_init_malloc((sd_template.dev_max << 4) * - sizeof(int), GFP_ATOMIC); - - for(i=0;i<(sd_template.dev_max << 4);i++){ - sd_blocksizes[i] = 1024; - sd_hardsizes[i] = 512; - } - blksize_size[MAJOR_NR] = sd_blocksizes; - hardsect_size[MAJOR_NR] = sd_hardsizes; - sd = (struct hd_struct *) scsi_init_malloc((sd_template.dev_max << 4) * - sizeof(struct hd_struct), - GFP_ATOMIC); - - - sd_gendisk.max_nr = sd_template.dev_max; - sd_gendisk.part = sd; - sd_gendisk.sizes = sd_sizes; - sd_gendisk.real_devices = (void *) rscsi_disks; - return 0; -} - -static void sd_finish(void) -{ - struct gendisk *gendisk; - int i; - - blk_dev[MAJOR_NR].request_fn = DEVICE_REQUEST; - - for (gendisk = gendisk_head; gendisk != NULL; gendisk = gendisk->next) - if (gendisk == &sd_gendisk) - break; - if (gendisk == NULL) - { - sd_gendisk.next = gendisk_head; - gendisk_head = &sd_gendisk; - } - - for (i = 0; i < sd_template.dev_max; ++i) - if (!rscsi_disks[i].capacity && - rscsi_disks[i].device) - { - if (MODULE_FLAG - && !rscsi_disks[i].has_part_table) { - sd_sizes[i << 4] = rscsi_disks[i].capacity; - /* revalidate does sd_init_onedisk via MAYBE_REINIT*/ - revalidate_scsidisk(MKDEV(MAJOR_NR, i << 4), 0); - } - else - i=sd_init_onedisk(i); - rscsi_disks[i].has_part_table = 1; - } - - /* If our host adapter is capable of scatter-gather, then we increase - * the read-ahead to 16 blocks (32 sectors). If not, we use - * a two block (4 sector) read ahead. - */ - if(rscsi_disks[0].device && rscsi_disks[0].device->host->sg_tablesize) - read_ahead[MAJOR_NR] = 120; /* 120 sector read-ahead */ - else - read_ahead[MAJOR_NR] = 4; /* 4 sector read-ahead */ - - return; -} - -static int sd_detect(Scsi_Device * SDp){ - if(SDp->type != TYPE_DISK && SDp->type != TYPE_MOD) return 0; - -#ifdef MACH - printk("Detected scsi %sdisk sd%d at scsi%d, channel %d, id %d, lun %d\n", - SDp->removable ? "removable " : "", - sd_template.dev_noticed++, - SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); -#else - printk("Detected scsi %sdisk sd%c at scsi%d, channel %d, id %d, lun %d\n", - SDp->removable ? "removable " : "", - 'a'+ (sd_template.dev_noticed++), - SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); -#endif - - return 1; -} - -static int sd_attach(Scsi_Device * SDp){ - Scsi_Disk * dpnt; - int i; - - if(SDp->type != TYPE_DISK && SDp->type != TYPE_MOD) return 0; - - if(sd_template.nr_dev >= sd_template.dev_max) { - SDp->attached--; - return 1; - } - - for(dpnt = rscsi_disks, i=0; idevice) break; - - if(i >= sd_template.dev_max) panic ("scsi_devices corrupt (sd)"); - - SDp->scsi_request_fn = do_sd_request; - rscsi_disks[i].device = SDp; - rscsi_disks[i].has_part_table = 0; - sd_template.nr_dev++; - sd_gendisk.nr_real++; - return 0; -} - -#define DEVICE_BUSY rscsi_disks[target].device->busy -#define USAGE rscsi_disks[target].device->access_count -#define CAPACITY rscsi_disks[target].capacity -#define MAYBE_REINIT sd_init_onedisk(target) -#define GENDISK_STRUCT sd_gendisk - -/* This routine is called to flush all partitions and partition tables - * for a changed scsi disk, and then re-read the new partition table. - * If we are revalidating a disk because of a media change, then we - * enter with usage == 0. If we are using an ioctl, we automatically have - * usage == 1 (we need an open channel to use an ioctl :-), so this - * is our limit. - */ -int revalidate_scsidisk(kdev_t dev, int maxusage){ - int target; - struct gendisk * gdev; - unsigned long flags; - int max_p; - int start; - int i; - - target = DEVICE_NR(dev); - gdev = &GENDISK_STRUCT; - - save_flags(flags); - cli(); - if (DEVICE_BUSY || USAGE > maxusage) { - restore_flags(flags); - printk("Device busy for revalidation (usage=%d)\n", USAGE); - return -EBUSY; - } - DEVICE_BUSY = 1; - restore_flags(flags); - - max_p = gdev->max_p; - start = target << gdev->minor_shift; - - for (i=max_p - 1; i >=0 ; i--) { - int minor = start+i; - kdev_t devi = MKDEV(MAJOR_NR, minor); - sync_dev(devi); - invalidate_inodes(devi); - invalidate_buffers(devi); - gdev->part[minor].start_sect = 0; - gdev->part[minor].nr_sects = 0; - /* - * Reset the blocksize for everything so that we can read - * the partition table. - */ - blksize_size[MAJOR_NR][minor] = 1024; - } - -#ifdef MAYBE_REINIT - MAYBE_REINIT; -#endif - - gdev->part[start].nr_sects = CAPACITY; - resetup_one_dev(gdev, target); - - DEVICE_BUSY = 0; - return 0; -} - -static int fop_revalidate_scsidisk(kdev_t dev){ - return revalidate_scsidisk(dev, 0); -} - - -static void sd_detach(Scsi_Device * SDp) -{ - Scsi_Disk * dpnt; - int i; - int max_p; - int start; - - for(dpnt = rscsi_disks, i=0; idevice == SDp) { - - /* If we are disconnecting a disk driver, sync and invalidate - * everything */ - max_p = sd_gendisk.max_p; - start = i << sd_gendisk.minor_shift; - - for (i=max_p - 1; i >=0 ; i--) { - int minor = start+i; - kdev_t devi = MKDEV(MAJOR_NR, minor); - sync_dev(devi); - invalidate_inodes(devi); - invalidate_buffers(devi); - sd_gendisk.part[minor].start_sect = 0; - sd_gendisk.part[minor].nr_sects = 0; - sd_sizes[minor] = 0; - } - - dpnt->has_part_table = 0; - dpnt->device = NULL; - dpnt->capacity = 0; - SDp->attached--; - sd_template.dev_noticed--; - sd_template.nr_dev--; - sd_gendisk.nr_real--; - return; - } - return; -} - -#ifdef MODULE - -int init_module(void) { - sd_template.usage_count = &mod_use_count_; - return scsi_register_module(MODULE_SCSI_DEV, &sd_template); -} - -void cleanup_module( void) -{ - struct gendisk * prev_sdgd; - struct gendisk * sdgd; - - scsi_unregister_module(MODULE_SCSI_DEV, &sd_template); - unregister_blkdev(SCSI_DISK_MAJOR, "sd"); - sd_registered--; - if( rscsi_disks != NULL ) - { - scsi_init_free((char *) rscsi_disks, - (sd_template.dev_noticed + SD_EXTRA_DEVS) - * sizeof(Scsi_Disk)); - - scsi_init_free((char *) sd_sizes, sd_template.dev_max * sizeof(int)); - scsi_init_free((char *) sd_blocksizes, sd_template.dev_max * sizeof(int)); - scsi_init_free((char *) sd_hardsizes, sd_template.dev_max * sizeof(int)); - scsi_init_free((char *) sd, - (sd_template.dev_max << 4) * sizeof(struct hd_struct)); - /* - * Now remove sd_gendisk from the linked list - */ - sdgd = gendisk_head; - prev_sdgd = NULL; - while(sdgd != &sd_gendisk) - { - prev_sdgd = sdgd; - sdgd = sdgd->next; - } - - if(sdgd != &sd_gendisk) - printk("sd_gendisk not in disk chain.\n"); - else { - if(prev_sdgd != NULL) - prev_sdgd->next = sdgd->next; - else - gendisk_head = sdgd->next; - } - } - - blksize_size[MAJOR_NR] = NULL; - blk_dev[MAJOR_NR].request_fn = NULL; - blk_size[MAJOR_NR] = NULL; - hardsect_size[MAJOR_NR] = NULL; - read_ahead[MAJOR_NR] = 0; - sd_template.dev_max = 0; -} -#endif /* MODULE */ - -/* - * Overrides for Emacs so that we almost follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ -- cgit v1.2.3