From 5b16c90c49b899ae62674c352514077a0a6afa2b Mon Sep 17 00:00:00 2001 From: Thomas Schwinge Date: Mon, 20 Feb 2006 19:20:05 +0000 Subject: 2006-02-20 Thomas Schwinge Remove unused and unsupported code. Consult the file `DEVELOPMENT' for details. Partly based on suggestions by Gianluca Guida . * i386/bogus/at3c501.h: Remove file. * i386/i386at/if_3c501.c: Likewise. * i386/i386at/if_3c501.h: Likewise. * i386/i386at/autoconf.c: Don't include anymore and adopt all users of NAT3C501 as if it were always defined to `0'. * i386/i386at/conf.c: Likewise. --- i386/bogus/at3c501.h | 1 - i386/i386at/autoconf.c | 11 - i386/i386at/conf.c | 15 - i386/i386at/if_3c501.c | 1240 ------------------------------------------------ i386/i386at/if_3c501.h | 175 ------- 5 files changed, 1442 deletions(-) delete mode 100644 i386/bogus/at3c501.h delete mode 100644 i386/i386at/if_3c501.c delete mode 100644 i386/i386at/if_3c501.h (limited to 'i386') diff --git a/i386/bogus/at3c501.h b/i386/bogus/at3c501.h deleted file mode 100644 index 0e4e440..0000000 --- a/i386/bogus/at3c501.h +++ /dev/null @@ -1 +0,0 @@ -#define NAT3C501 1 diff --git a/i386/i386at/autoconf.c b/i386/i386at/autoconf.c index bd0cddc..50a0e6f 100644 --- a/i386/i386at/autoconf.c +++ b/i386/i386at/autoconf.c @@ -59,12 +59,6 @@ extern struct bus_driver eaha_driver; extern int eaha_intr(); #endif /* NEAHA */ -#include -#if NAT3C501 > 0 -extern struct bus_driver at3c501driver; -extern int at3c501intr(); -#endif /* NAT3C501 */ - #include #if NUL > 0 extern struct bus_driver uldriver; @@ -245,11 +239,6 @@ struct bus_device bus_device_init[] = { { &eaha_driver, "tz", 7, 0, 0x0,0, 0, '?', 0, 0, 7, 0, }, #endif /* NEAHA > 0*/ -#if NAT3C501 > 0 - {&at3c501driver, "et", 0, at3c501intr, 0x300, 0,0x300, - '?', 0, -1, -1, 0, 0, 0, SPL_SIX, 9}, -#endif /* NAT3C501 > 0 */ - #if NUL > 0 {&uldriver, "ul", 0, ulintr, 0, 0, 0, '?', 0, -1, -1, 0, 0, 0, SPL_SIX, 0}, {&uldriver, "ul", 1, ulintr, 0, 0, 0, '?', 0, -1, -1, 0, 0, 0, SPL_SIX, 0}, diff --git a/i386/i386at/conf.c b/i386/i386at/conf.c index 446744b..e718b7d 100644 --- a/i386/i386at/conf.c +++ b/i386/i386at/conf.c @@ -54,14 +54,6 @@ extern int wtopen(), wtread(), wtwrite(), wtclose(); #define wtname "wt" #endif /* NWT > 0 */ -#include -#if NAT3C501 > 0 -extern int at3c501open(), at3c501output(), - at3c501getstat(), at3c501setstat(), - at3c501setinput(); -#define at3c501name "et" -#endif /* NAT3C501 > 0 */ - #include #if NUL > 0 extern int ulopen(), uloutput(), ulgetstat(), ulsetstat(), @@ -199,13 +191,6 @@ struct dev_ops dev_name_list[] = nodev }, #endif /* NWT > 0 */ -#if NAT3C501 > 0 - { at3c501name, at3c501open, nulldev, nulldev, - at3c501output,at3c501getstat, at3c501setstat, nomap, - at3c501setinput, nulldev, nulldev, 0, - nodev }, -#endif - #if NUL > 0 { ulname, ulopen, nulldev, nulldev, uloutput, ulgetstat, ulsetstat, nulldev, diff --git a/i386/i386at/if_3c501.c b/i386/i386at/if_3c501.c deleted file mode 100644 index b822d27..0000000 --- a/i386/i386at/if_3c501.c +++ /dev/null @@ -1,1240 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * File: if_3c501.c - * Author: Philippe Bernadat - * Date: 1989 - * Copyright (c) 1989 OSF Research Institute - * - * 3COM Etherlink 3C501 Mach Ethernet drvier - */ -/* - Copyright 1990 by Open Software Foundation, -Cambridge, MA. - - All Rights Reserved - - Permission to use, copy, modify, and distribute this software and -its documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appears in all copies and -that both the copyright notice and this permission notice appear in -supporting documentation, and that the name of OSF or Open Software -Foundation not be used in advertising or publicity pertaining to -distribution of the software without specific, written prior -permission. - - OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE -INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, -IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR -CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT, -NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION -WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - -#include - -#ifdef MACH_KERNEL -#include -#include -#include -#include -#include -#include -#include -#include -#else MACH_KERNEL -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#ifdef INET -#include -#include -#include -#include -#include -#endif - -#ifdef NS -#include -#include -#endif -#endif MACH_KERNEL - -#include -#include -#include - -#define SPLNET spl6 - -int at3c501probe(); -void at3c501attach(); -int at3c501intr(); -int at3c501init(); -int at3c501output(); -int at3c501ioctl(); -int at3c501reset(); -int at3c501watch(); - -static vm_offset_t at3c501_std[NAT3C501] = { 0 }; -static struct bus_device *at3c501_info[NAT3C501]; -struct bus_driver at3c501driver = - {at3c501probe, 0, at3c501attach, 0, at3c501_std, "et", at3c501_info, }; - -int watchdog_id; - -typedef struct { -#ifdef MACH_KERNEL - struct ifnet ds_if; /* generic interface header */ - u_char ds_addr[6]; /* Ethernet hardware address */ -#else MACH_KERNEL - struct arpcom at3c501_ac; -#define ds_if at3c501_ac.ac_if -#define ds_addr at3c501_ac.ac_enaddr -#endif MACH_KERNEL - int flags; - int timer; - char *base; - u_char address[ETHER_ADD_SIZE]; - short mode; - int badxmt; - int badrcv; - int spurious; - int rcv; - int xmt; -} at3c501_softc_t; - -at3c501_softc_t at3c501_softc[NAT3C501]; - -/* - * at3c501probe: - * - * This function "probes" or checks for the 3c501 board on the bus to see - * if it is there. As far as I can tell, the best break between this - * routine and the attach code is to simply determine whether the board - * is configured in properly. Currently my approach to this is to write - * and read a string from the Packet Buffer on the board being probed. - * If the string comes back properly then we assume the board is there. - * The config code expects to see a successful return from the probe - * routine before attach will be called. - * - * input : address device is mapped to, and unit # being checked - * output : a '1' is returned if the board exists, and a 0 otherwise - * - */ -at3c501probe(port, dev) -struct bus_device *dev; -{ - caddr_t base = (caddr_t)dev->address; - int unit = dev->unit; - char inbuf[50]; - char *str = "3c501 ethernet board %d out of range\n"; - int strsize = strlen(str); - - if ((unit < 0) || (unit >= NAT3C501)) { - printf(str, unit); - return(0); - } - - /* reset */ - outb(IE_CSR(base), IE_RESET); - - /* write a string to the packet buffer */ - - outb(IE_CSR(base), IE_RIDE | IE_SYSBFR); - outw(IE_GP(base), 0); - loutb(IE_BFR(base), str, strsize); - - /* read it back */ - - outb(IE_CSR(base), IE_RIDE | IE_SYSBFR); - outw(IE_GP(base), 0); - linb(IE_BFR(base), inbuf, strsize); - /* compare them */ - -#ifdef MACH_KERNEL - if (strncmp(str, inbuf, strsize)) -#else MACH_KERNEL - if (bcmp(str, inbuf, strsize)) -#endif MACH_KERNEL - { - return(0); - } - at3c501_softc[unit].base = base; - - return(1); -} - -/* - * at3c501attach: - * - * This function attaches a 3C501 board to the "system". The rest of - * runtime structures are initialized here (this routine is called after - * a successful probe of the board). Once the ethernet address is read - * and stored, the board's ifnet structure is attached and readied. - * - * input : bus_device structure setup in autoconfig - * output : board structs and ifnet is setup - * - */ -void at3c501attach(dev) -struct bus_device *dev; -{ - at3c501_softc_t *sp; - struct ifnet *ifp; - u_char unit; - caddr_t base; -#ifdef MACH_KERNEL -#else MACH_KERNEL - extern int tcp_recvspace; - tcp_recvspace = 0x300; /* empircal messure */ -#endif MACH_KERNEL - - take_dev_irq(dev); - unit = (u_char)dev->unit; - printf(", port = %x, spl = %d, pic = %d. ", - dev->address, dev->sysdep, dev->sysdep1); - - sp = &at3c501_softc[unit]; - base = sp->base; - if (base != (caddr_t)dev->address) { - printf("3C501 board %d attach address error\n", unit); - return; - } - sp->timer = -1; - sp->flags = 0; - sp->mode = 0; - outb(IE_CSR(sp->base), IE_RESET); - at3c501geteh(base, sp->ds_addr); - at3c501geteh(base, sp->address); - at3c501seteh(base, sp->address); - printf("ethernet id [%x:%x:%x:%x:%x:%x]", - sp->address[0],sp->address[1],sp->address[2], - sp->address[3],sp->address[4],sp->address[5]); - ifp = &(sp->ds_if); - ifp->if_unit = unit; - ifp->if_mtu = ETHERMTU; - ifp->if_flags = IFF_BROADCAST; -#ifdef MACH_KERNEL - ifp->if_header_size = sizeof(struct ether_header); - ifp->if_header_format = HDR_ETHERNET; - ifp->if_address_size = 6; - ifp->if_address = (char *)&sp->address[0]; - if_init_queues(ifp); -#else MACH_KERNEL - ifp->if_name = "et"; - ifp->if_init = at3c501init; - ifp->if_output = at3c501output; - ifp->if_ioctl = at3c501ioctl; - ifp->if_reset = at3c501reset; - ifp->if_next = NULL; - if_attach(ifp); -#ifdef notdef - watchdog_id = timeout(at3c501watch, &(ifp->if_unit), 20*HZ); -#endif -#endif MACH_KERNEL -} - -/* - * at3c501watch(): - * - */ -at3c501watch(b_ptr) - -caddr_t b_ptr; - -{ - int x, - y, - opri, - unit; - at3c501_softc_t *is; - - unit = *b_ptr; -#ifdef MACH_KERNEL - timeout(at3c501watch,b_ptr,20*hz); -#else MACH_KERNEL - watchdog_id = timeout(at3c501watch,b_ptr,20*HZ); -#endif MACH_KERNEL - is = &at3c501_softc[unit]; - printf("\nxmt/bad rcv/bad spurious\n"); - printf("%d/%d %d/%d %d\n", is->xmt, is->badxmt, \ - is->rcv, is->badrcv, is->spurious); - is->rcv=is->badrcv=is->xmt=is->badxmt=is->spurious=0; -} - -/* - * at3c501geteh: - * - * This function gets the ethernet address (array of 6 unsigned - * bytes) from the 3c501 board prom. - * - */ - -at3c501geteh(base, ep) -caddr_t base; -char *ep; -{ - int i; - - for (i = 0; i < ETHER_ADD_SIZE; i++) { - outw(IE_GP(base), i); - *ep++ = inb(IE_SAPROM(base)); - } -} - -/* - * at3c501seteh: - * - * This function sets the ethernet address (array of 6 unsigned - * bytes) on the 3c501 board. - * - */ - -at3c501seteh(base, ep) -caddr_t base; -char *ep; -{ - int i; - - for (i = 0; i < ETHER_ADD_SIZE; i++) { - outb(EDLC_ADDR(base) + i, *ep++); - } -} - -#ifdef MACH_KERNEL -int at3c501start(); /* forward */ - -at3c501output(dev, ior) - dev_t dev; - io_req_t ior; -{ - register int unit = minor(dev); - - if (unit < 0 || unit >= NAT3C501 || - at3c501_softc[unit].base == 0) - return (ENXIO); - - return (net_write(&at3c501_softc[unit].ds_if, at3c501start, ior)); -} - -at3c501setinput(dev, receive_port, priority, filter, filter_count) - dev_t dev; - mach_port_t receive_port; - int priority; - filter_t filter[]; - u_int filter_count; -{ - register int unit = minor(dev); - - if (unit < 0 || unit >= NAT3C501 || - at3c501_softc[unit].base == 0) - return (ENXIO); - - return (net_set_filter(&at3c501_softc[unit].ds_if, - receive_port, priority, - filter, filter_count)); -} - -#else MACH_KERNEL -/* - * at3c501output: - * - * This routine is called by the "if" layer to output a packet to - * the network. This code resolves the local ethernet address, and - * puts it into the mbuf if there is room. If not, then a new mbuf - * is allocated with the header information and precedes the data - * to be transmitted. - * - * input: ifnet structure pointer, an mbuf with data, and address - * to be resolved - * output: mbuf is updated to hold enet address, or a new mbuf - * with the address is added - * - */ -at3c501output(ifp, m0, dst) -struct ifnet *ifp; -struct mbuf *m0; -struct sockaddr *dst; -{ - int type, error; - spl_t opri; - u_char edst[6]; - struct in_addr idst; - register at3c501_softc_t *is; - register struct mbuf *m = m0; - register struct ether_header *eh; - register int off; - int usetrailers; - - is = &at3c501_softc[ifp->if_unit]; - if ((ifp->if_flags & (IFF_UP|IFF_RUNNING)) != (IFF_UP|IFF_RUNNING)) { - printf("3C501 Turning off board %d\n", ifp->if_unit); - at3c501intoff(ifp->if_unit); - error = ENETDOWN; - goto bad; - } - switch (dst->sa_family) { - -#ifdef INET - case AF_INET: - idst = ((struct sockaddr_in *)dst)->sin_addr; - if (!arpresolve(&is->at3c501_ac, m, &idst, edst, &usetrailers)){ - return (0); /* if not yet resolved */ - } - off = ntohs((u_short)mtod(m, struct ip *)->ip_len) - m->m_len; - - if (usetrailers && off > 0 && (off & 0x1ff) == 0 && - m->m_off >= MMINOFF + 2 * sizeof (u_short)) { - type = ETHERTYPE_TRAIL + (off>>9); - m->m_off -= 2 * sizeof (u_short); - m->m_len += 2 * sizeof (u_short); - *mtod(m, u_short *) = htons((u_short)ETHERTYPE_IP); - *(mtod(m, u_short *) + 1) = htons((u_short)m->m_len); - goto gottrailertype; - } - type = ETHERTYPE_IP; - off = 0; - goto gottype; -#endif -#ifdef NS - case AF_NS: - type = ETHERTYPE_NS; - bcopy((caddr_t)&(((struct sockaddr_ns *)dst)->sns_addr.x_host), - (caddr_t)edst, sizeof (edst)); - off = 0; - goto gottype; -#endif - - case AF_UNSPEC: - eh = (struct ether_header *)dst->sa_data; - bcopy((caddr_t)eh->ether_dhost, (caddr_t)edst, sizeof (edst)); - type = eh->ether_type; - goto gottype; - - default: - printf("at3c501%d: can't handle af%d\n", ifp->if_unit, - dst->sa_family); - error = EAFNOSUPPORT; - goto bad; - } - -gottrailertype: - /* - * Packet to be sent as trailer: move first packet - * (control information) to end of chain. - */ - while (m->m_next) - m = m->m_next; - m->m_next = m0; - m = m0->m_next; - m0->m_next = 0; - m0 = m; - -gottype: - /* - * Add local net header. If no space in first mbuf, - * allocate another. - */ - if (m->m_off > MMAXOFF || - MMINOFF + sizeof (struct ether_header) > m->m_off) { - m = m_get(M_DONTWAIT, MT_HEADER); - if (m == 0) { - error = ENOBUFS; - goto bad; - } - m->m_next = m0; - m->m_off = MMINOFF; - m->m_len = sizeof (struct ether_header); - } else { - m->m_off -= sizeof (struct ether_header); - m->m_len += sizeof (struct ether_header); - } - eh = mtod(m, struct ether_header *); - eh->ether_type = htons((u_short)type); - bcopy((caddr_t)edst, (caddr_t)eh->ether_dhost, sizeof (edst)); - bcopy((caddr_t)is->address,(caddr_t)eh->ether_shost, - sizeof(edst)); - /* - * Queue message on interface, and start output if interface - * not yet active. - */ - opri = SPLNET(); - if (IF_QFULL(&ifp->if_snd)) { - IF_DROP(&ifp->if_snd); - splx(opri); - m_freem(m); - return (ENOBUFS); - } - IF_ENQUEUE(&ifp->if_snd, m); - /* - * Some action needs to be added here for checking whether the - * board is already transmitting. If it is, we don't want to - * start it up (ie call at3c501start()). We will attempt to send - * packets that are queued up after an interrupt occurs. Some - * flag checking action has to happen here and/or in the start - * routine. This note is here to remind me that some thought - * is needed and there is a potential problem here. - * - */ - at3c501start(ifp->if_unit); - splx(opri); - return (0); - -bad: - m_freem(m0); - return (error); -} -#endif MACH_KERNEL - -/* - * at3c501reset: - * - * This routine is in part an entry point for the "if" code. Since most - * of the actual initialization has already (we hope already) been done - * by calling at3c501attach(). - * - * input : unit number or board number to reset - * output : board is reset - * - */ -at3c501reset(unit) -int unit; -{ - at3c501_softc[unit].ds_if.if_flags &= ~IFF_RUNNING; - return(at3c501init(unit)); -} - - - -/* - * at3c501init: - * - * Another routine that interfaces the "if" layer to this driver. - * Simply resets the structures that are used by "upper layers". - * As well as calling at3c501hwrst that does reset the at3c501 board. - * - * input : board number - * output : structures (if structs) and board are reset - * - */ -at3c501init(unit) -int unit; -{ - struct ifnet *ifp; - int stat; - spl_t oldpri; - - ifp = &(at3c501_softc[unit].ds_if); -#ifdef MACH_KERNEL -#else MACH_KERNEL - if (ifp->if_addrlist == (struct ifaddr *)0) { - return; - } -#endif MACH_KERNEL - oldpri = SPLNET(); - if ((stat = at3c501hwrst(unit)) == TRUE) { - at3c501_softc[unit].ds_if.if_flags |= IFF_RUNNING; - at3c501_softc[unit].flags |= DSF_RUNNING; - at3c501start(unit); - } - else - printf("3C501 trouble resetting board %d\n", unit); - at3c501_softc[unit].timer = 5; - splx(oldpri); - return(stat); - -} - -#ifdef MACH_KERNEL -/*ARGSUSED*/ -at3c501open(dev, flag) - dev_t dev; - int flag; -{ - register int unit = minor(dev); - - if (unit < 0 || unit >= NAT3C501 || - at3c501_softc[unit].base == 0) - return (ENXIO); - - at3c501_softc[unit].ds_if.if_flags |= IFF_UP; - at3c501init(unit); - return(0); -} -#endif MACH_KERNEL - -/* - * at3c501start: - * - * This is yet another interface routine that simply tries to output a - * in an mbuf after a reset. - * - * input : board number - * output : stuff sent to board if any there - * - */ -at3c501start(unit) -int unit; - -{ -#ifdef MACH_KERNEL - io_req_t m; -#else MACH_KERNEL - struct mbuf *m; -#endif MACH_KERNEL - struct ifnet *ifp; - - ifp = &(at3c501_softc[unit].ds_if); - for(;;) { - IF_DEQUEUE(&ifp->if_snd, m); -#ifdef MACH_KERNEL - if (m != 0) -#else MACH_KERNEL - if (m != (struct mbuf *)0) -#endif MACH_KERNEL - at3c501xmt(unit, m); - else - return; - } -} - -#ifdef MACH_KERNEL -/*ARGSUSED*/ -at3c501getstat(dev, flavor, status, count) - dev_t dev; - int flavor; - dev_status_t status; /* pointer to OUT array */ - u_int *count; /* out */ -{ - register int unit = minor(dev); - - if (unit < 0 || unit >= NAT3C501 || - at3c501_softc[unit].base == 0) - return (ENXIO); - - return (net_getstat(&at3c501_softc[unit].ds_if, - flavor, - status, - count)); -} - -at3c501setstat(dev, flavor, status, count) - dev_t dev; - int flavor; - dev_status_t status; - u_int count; -{ - register int unit = minor(dev); - register at3c501_softc_t *sp; - - if (unit < 0 || unit >= NAT3C501 || - at3c501_softc[unit].base == 0) - return (ENXIO); - - sp = &at3c501_softc[unit]; - - switch (flavor) { - case NET_STATUS: - { - /* - * All we can change are flags, and not many of those. - */ - register struct net_status *ns = (struct net_status *)status; - int mode = 0; - - if (count < NET_STATUS_COUNT) - return (D_INVALID_SIZE); - - if (ns->flags & IFF_ALLMULTI) - mode |= MOD_ENAL; - if (ns->flags & IFF_PROMISC) - mode |= MOD_PROM; - - /* - * Force a compilete reset if the receive mode changes - * so that these take effect immediately. - */ - if (sp->mode != mode) { - sp->mode = mode; - if (sp->flags & DSF_RUNNING) { - sp->flags &= ~(DSF_LOCK | DSF_RUNNING); - at3c501init(unit); - } - } - break; - } - case NET_ADDRESS: - { - register union ether_cvt { - char addr[6]; - int lwd[2]; - } *ec = (union ether_cvt *)status; - - if (count < sizeof(*ec)/sizeof(int)) - return (D_INVALID_SIZE); - - ec->lwd[0] = ntohl(ec->lwd[0]); - ec->lwd[1] = ntohl(ec->lwd[1]); - at3c501seteh(sp->base, ec->addr); - break; - } - - default: - return (D_INVALID_OPERATION); - } - return (D_SUCCESS); -} -#else MACH_KERNEL - -/* - * at3c501ioctl: - * - * This routine processes an ioctl request from the "if" layer - * above. - * - * input : pointer the appropriate "if" struct, command, and data - * output : based on command appropriate action is taken on the - * at3c501 board(s) or related structures - * return : error is returned containing exit conditions - * - */ -int curr_ipl; -u_short curr_pic_mask; -u_short pic_mask[]; - -at3c501ioctl(ifp, cmd, data) -struct ifnet *ifp; -int cmd; -caddr_t data; -{ - register struct ifaddr *ifa = (struct ifaddr *)data; - register at3c501_softc_t *is; - int error; - spl_t opri; - short mode = 0; - - is = &at3c501_softc[ifp->if_unit]; - opri = SPLNET(); - error = 0; - switch (cmd) { - case SIOCSIFADDR: - ifp->if_flags |= IFF_UP; - at3c501init(ifp->if_unit); - switch (ifa->ifa_addr.sa_family) { -#ifdef INET - case AF_INET: - ((struct arpcom *)ifp)->ac_ipaddr = - IA_SIN(ifa)->sin_addr; - arpwhohas((struct arpcom *)ifp, - &IA_SIN(ifa)->sin_addr); - break; -#endif -#ifdef NS - case AF_NS: - { - register struct ns_addr *ina = - &(IA_SNS(ifa)->sns_addr); - if (ns_nullhost(*ina)) - ina->x_host = - *(union ns_host *)(ds->ds_addr); - else - at3c501seteh(ina->x_host.c_host, - at3c501_softc[ifp->if_unit].base); - break; - } -#endif - } - break; - case SIOCSIFFLAGS: - if (ifp->if_flags & IFF_ALLMULTI) - mode |= MOD_ENAL; - if (ifp->if_flags & IFF_PROMISC) - mode |= MOD_PROM; - /* - * force a complete reset if the receive multicast/ - * promiscuous mode changes so that these take - * effect immediately. - * - */ - if (is->mode != mode) { - is->mode = mode; - if (is->flags & DSF_RUNNING) { - is->flags &= - ~(DSF_LOCK|DSF_RUNNING); - at3c501init(ifp->if_unit); - } - } - if ((ifp->if_flags & IFF_UP) == 0 && - is->flags & DSF_RUNNING) { - printf("AT3C501 ioctl: turning off board %d\n", - ifp->if_unit); - is->flags &= ~(DSF_LOCK | DSF_RUNNING); - is->timer = -1; - at3c501intoff(ifp->if_unit); - } else - if (ifp->if_flags & IFF_UP && - (is->flags & DSF_RUNNING) == 0) - at3c501init(ifp->if_unit); - break; - default: - error = EINVAL; - } - splx(opri); - return (error); -} -#endif MACH_KERNEL - - -/* - * at3c501hwrst: - * - * This routine resets the at3c501 board that corresponds to the - * board number passed in. - * - * input : board number to do a hardware reset - * output : board is reset - * - */ -#define XMT_STAT (EDLC_16|EDLC_JAM|EDLC_UNDER|EDLC_IDLE) -#define RCV_STAT (EDLC_STALE|EDLC_ANY|EDLC_SHORT|EDLC_DRIBBLE|EDLC_OVER|EDLC_FCS) -int -at3c501hwrst(unit) -int unit; -{ - u_char stat; - caddr_t base = at3c501_softc[unit].base; - - outb(IE_CSR(base), IE_RESET); - outb(IE_CSR(base), 0); - at3c501seteh(base, at3c501_softc[unit].address); - if ((stat = inb(IE_CSR(base))) != IE_RESET) { - printf("at3c501reset: can't reset CSR: %x\n", stat); - return(FALSE); - } - if ((stat = inb(EDLC_XMT(base))) & XMT_STAT) { - printf("at3c501reset: can't reset XMT: %x\n", stat); - return(FALSE); - } - if (((stat = inb(EDLC_RCV(base))) & RCV_STAT) != EDLC_STALE) { - printf("at3c501reset: can't reset RCV: %x\n", stat); - return(FALSE); - } - if (at3c501config(unit) == FALSE) { - printf("at3c501hwrst(): failed to config\n"); - return(FALSE); - } - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - return(TRUE); -} - -/* - * at3c501intr: - * - * This function is the interrupt handler for the at3c501 ethernet - * board. This routine will be called whenever either a packet - * is received, or a packet has successfully been transfered and - * the unit is ready to transmit another packet. - * - * input : board number that interrupted - * output : either a packet is received, or a packet is transfered - * - */ -at3c501intr(unit) -int unit; -{ - at3c501rcv(unit); - at3c501start(unit); - - return(0); -} - - -/* - * at3c501rcv: - * - * This routine is called by the interrupt handler to initiate a - * packet transfer from the board to the "if" layer above this - * driver. This routine checks if a buffer has been successfully - * received by the at3c501. If so, the routine at3c501read is called - * to do the actual transfer of the board data (including the - * ethernet header) into a packet (consisting of an mbuf chain). - * - * input : number of the board to check - * output : if a packet is available, it is "sent up" - * - */ -at3c501rcv(unit) -int unit; -{ - int stat; - caddr_t base; -#ifdef MACH_KERNEL - ipc_kmsg_t new_kmsg; - struct ether_header *ehp; - struct packet_header *pkt; -#else MACH_KERNEL - struct mbuf *m, *tm; -#endif MACH_KERNEL - u_short len; - register struct ifnet *ifp; - struct ether_header header; - int tlen; - register at3c501_softc_t *is; - register struct ifqueue *inq; - spl_t opri; - struct ether_header eh; - - is = &at3c501_softc[unit]; - ifp = &is->ds_if; - base = at3c501_softc[unit].base; - is->rcv++; - if (inb(IE_CSR(base)) & IE_RCVBSY) - is->spurious++; - while (!((stat=inb(EDLC_RCV(base))) & EDLC_STALE)) { - outb(IE_CSR(base), IE_SYSBFR); - if (!(stat & EDLC_ANY)) { - outw(IE_GP(base), 0); - len = inw(IE_RP(base))-sizeof(struct ether_header); - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - is->badrcv++; -#ifdef DEBUG - printf("at3c501rcv: received %d bad bytes", len); - if (stat & EDLC_SHORT) - printf(" Short frame"); - if (stat & EDLC_OVER) - printf(" Data overflow"); - if (stat & EDLC_DRIBBLE) - printf(" Dribble error"); - if (stat & EDLC_FCS) - printf(" CRC error"); - printf("\n"); -#endif DEBUG - } else { - outw(IE_GP(base), 0); - len = inw(IE_RP(base)); - if (len < 60) { - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - return; - } - linb(IE_BFR(base), &eh, sizeof(struct ether_header)); -#ifdef MACH_KERNEL - new_kmsg = net_kmsg_get(); - if (new_kmsg == IKM_NULL) { - /* - * Drop the packet. - */ - is->ds_if.if_rcvdrops++; - - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - return; - } - - ehp = (struct ether_header *) - (&net_kmsg(new_kmsg)->header[0]); - pkt = (struct packet_header *) - (&net_kmsg(new_kmsg)->packet[0]); - - /* - * Get header. - */ - *ehp = eh; - - /* - * Get body - */ - linb(IE_BFR(base), - (char *)(pkt + 1), - len - sizeof(struct ether_header)); - - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - - pkt->type = ehp->ether_type; - pkt->length = len - sizeof(struct ether_header) - + sizeof(struct packet_header); - - /* - * Hand the packet to the network module. - */ - net_packet(ifp, new_kmsg, pkt->length, - ethernet_priority(new_kmsg)); - -#else MACH_KERNEL - eh.ether_type = htons(eh.ether_type); - m =(struct mbuf *)0; -#ifdef DEBUG - printf("received %d bytes\n", len); -#endif DEBUG - len -= sizeof(struct ether_header); - while ( len ) { - if (m == (struct mbuf *)0) { - m = m_get(M_DONTWAIT, MT_DATA); - if (m == (struct mbuf *)0) { - printf("at3c501rcv: Lost frame\n"); - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - - return; - } - tm = m; - tm->m_off = MMINOFF; - /* - * first mbuf in the packet must contain a pointer to the - * ifnet structure. other mbufs that follow and make up - * the packet do not need this pointer in the mbuf. - * - */ - *(mtod(tm, struct ifnet **)) = ifp; - tm->m_len = sizeof(struct ifnet **); - } - else { - tm->m_next = m_get(M_DONTWAIT, MT_DATA); - tm = tm->m_next; - tm->m_off = MMINOFF; - tm->m_len = 0; - if (tm == (struct mbuf *)0) { - m_freem(m); - printf("at3c501rcv: No mbufs, lost frame\n"); - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - return; - } - } - tlen = MIN( MLEN - tm->m_len, len ); - tm->m_next = (struct mbuf *)0; - linb(IE_BFR(base), mtod(tm, char *)+tm->m_len, tlen ); - tm->m_len += tlen; - len -= tlen; - } - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - /* - * received packet is now in a chain of mbuf's. next step is - * to pass the packet upwards. - * - */ - switch (eh.ether_type) { -#ifdef INET - case ETHERTYPE_IP: - schednetisr(NETISR_IP); - inq = &ipintrq; - break; - case ETHERTYPE_ARP: - arpinput(&is->at3c501_ac, m); - return; -#endif -#ifdef NS - case ETHERTYPE_NS: - schednetisr(NETISR_NS); - inq = &nsintrq; - break; -#endif - default: - m_freem(m); - return; - } - opri = SPLNET(); - if (IF_QFULL(inq)) { - IF_DROP(inq); - splx(opri); - m_freem(m); - return; - } - IF_ENQUEUE(inq, m); - splx(opri); -#endif MACH_KERNEL - } - } -} - - -/* - * at3c501xmt: - * - * This routine fills in the appropriate registers and memory - * locations on the 3C501 board and starts the board off on - * the transmit. - * - * input : board number of interest, and a pointer to the mbuf - * output : board memory and registers are set for xfer and attention - * - */ -at3c501xmt(unit, m) -int unit; -#ifdef MACH_KERNEL -io_req_t m; -#else MACH_KERNEL -struct mbuf *m; -#endif MACH_KERNEL -{ -#ifdef MACH_KERNEL -#else MACH_KERNEL - register struct mbuf *tm_p; -#endif MACH_KERNEL - int i; - at3c501_softc_t *is = &at3c501_softc[unit]; - caddr_t base = is->base; - u_short count = 0; - u_short bytes_in_msg; - - is->xmt++; - outb(IE_CSR(base), IE_SYSBFR); -#ifdef MACH_KERNEL - count = m->io_count; -#define max(a,b) (((a) > (b)) ? (a) : (b)) - bytes_in_msg = max(count, - ETHERMIN + sizeof(struct ether_header)); -#else MACH_KERNEL - bytes_in_msg = max(m_length(m), ETHERMIN + sizeof(struct ether_header)); -#endif MACH_KERNEL - outw(IE_GP(base), BFRSIZ-bytes_in_msg); -#ifdef MACH_KERNEL - loutb(IE_BFR(base), m->io_data, count); -#else MACH_KERNEL - for (tm_p = m; tm_p != (struct mbuf *)0; tm_p = tm_p->m_next) { - if (count + tm_p->m_len > ETHERMTU + sizeof(struct ether_header)) - break; - if (tm_p->m_len == 0) - continue; - loutb(IE_BFR(base), mtod(tm_p, caddr_t), tm_p->m_len); - count += tm_p->m_len; - } -#endif MACH_KERNEL - while (count < bytes_in_msg) { - outb(IE_BFR(base), 0); - count++; - } - do { - if (!(int)m) { - outb(IE_CSR(base), IE_SYSBFR); - } - outw(IE_GP(base), BFRSIZ-bytes_in_msg); - outb(IE_CSR(base), IE_RIDE|IE_XMTEDLC); - if (m) { -#ifdef MACH_KERNEL - iodone(m); - m = 0; -#else MACH_KERNEL - m_freem(m); - m = (struct mbuf *) 0; -#endif MACH_KERNEL - } - for (i=0; inb(IE_CSR(base)) & IE_XMTBSY; i++); - if ((i=inb(EDLC_XMT(base))) & EDLC_JAM) { - is->badxmt++; -#ifdef DEBUG - printf("at3c501xmt jam\n"); -#endif DEBUG - } - } while ((i & EDLC_JAM) && !(i & EDLC_16)); - - if (i & EDLC_16) { - printf("%"); - } - return; - -} - -/* - * at3c501config: - * - * This routine does a standard config of the at3c501 board. - * - */ -at3c501config(unit) -int unit; -{ - caddr_t base = at3c501_softc[unit].base; - u_char stat; - - /* Enable DMA & Interrupts */ - - outb(IE_CSR(base), IE_RIDE|IE_SYSBFR); - - /* No Transmit Interrupts */ - - outb(EDLC_XMT(base), 0); - inb(EDLC_XMT(base)); - - /* Setup Receive Interrupts */ - - outb(EDLC_RCV(base), EDLC_BROAD|EDLC_SHORT|EDLC_GOOD|EDLC_DRIBBLE|EDLC_OVER); - inb(EDLC_RCV(base)); - - outb(IE_CSR(base), IE_RIDE|IE_SYSBFR); - outb(IE_RP(base), 0); - outb(IE_CSR(base), IE_RIDE|IE_RCVEDLC); - return(TRUE); -} - -/* - * at3c501intoff: - * - * This function turns interrupts off for the at3c501 board indicated. - * - */ -at3c501intoff(unit) -int unit; -{ - caddr_t base = at3c501_softc[unit].base; - outb(IE_CSR(base), 0); -} - -#ifdef MACH_KERNEL -#else MACH_KERNEL -/* - * The length of an mbuf chain - */ -m_length(m) - register struct mbuf *m; -{ - register int len = 0; - - while (m) { - len += m->m_len; - m = m->m_next; - } - return len; -} -#endif MACH_KERNEL diff --git a/i386/i386at/if_3c501.h b/i386/i386at/if_3c501.h deleted file mode 100644 index ac0641f..0000000 --- a/i386/i386at/if_3c501.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * File: if_3c501.h - * Author: Philippe Bernadat - * Date: 1989 - * Copyright (c) 1989 OSF Research Institute - * - * 3COM Etherlink 3C501 Mach Ethernet drvier - */ -/* - Copyright 1990 by Open Software Foundation, -Cambridge, MA. - - All Rights Reserved - - Permission to use, copy, modify, and distribute this software and -its documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appears in all copies and -that both the copyright notice and this permission notice appear in -supporting documentation, and that the name of OSF or Open Software -Foundation not be used in advertising or publicity pertaining to -distribution of the software without specific, written prior -permission. - - OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE -INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, -IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR -CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT, -NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION -WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -*/ - -/* The various IE command registers */ - -#define EDLC_ADDR(base) (base) /* EDLC station address, 6 bytes*/ -#define EDLC_RCV(base) ((base)+0x6) /* EDLC receive cmd. & stat. */ -#define EDLC_XMT(base) ((base)+0x7) /* EDLC transmit cmd. & stat. */ -#define IE_GP(base) ((base)+0x8) /* General Purpose pointer */ -#define IE_RP(base) ((base)+0xa) /* Receive buffer pointer */ -#define IE_SAPROM(base) ((base)+0xc) /* station addr prom window */ -#define IE_CSR(base) ((base)+0xe) /* IE command and status */ -#define IE_BFR(base) ((base)+0xf) /* 1 byte window on packet buffer*/ - -/* CSR Status Register (read) - * - * _______________________________________________________________________ - * | | | | | | | | | - * | XMTBSY | RIDE | DMA | EDMA | BUFCTL | | RCVBSY | - * |________|________|________|________|________|________|________|________| - * - */ - -/* CSR Command Register (write) - * - * _______________________________________________________________________ - * | | | | | | | | | - * | RESET | RIDE | DMA | | BUFCTL | | IRE | - * |________|________|________|________|________|________|________|________| - * - */ - -#define IE_XMTBSY 0x80 /* Transmitter busy (ro) */ -#define IE_RESET 0x80 /* reset the controller (wo) */ -#define IE_RIDE 0x40 /* request interrupt/DMA enable (rw) */ -#define IE_DMA 0x20 /* DMA request (rw) */ -#define IE_EDMA 0x10 /* DMA done (ro) */ -#define IE_BUFCTL 0x0c /* mask for buffer control field (rw) */ -#define IE_RCVBSY 0x01 /* receive in progress (ro) */ -#define IE_IRE 0x01 /* Interrupt request enable */ - -/* BUFCTL values */ - -#define IE_LOOP 0x0c /* 2 bit field in bits 2,3, loopback */ -#define IE_RCVEDLC 0x08 /* gives buffer to receiver */ -#define IE_XMTEDLC 0x04 /* gives buffer to transmit */ -#define IE_SYSBFR 0x00 /* gives buffer to processor */ - -/* XMTCSR Transmit Status Register (read) - * - * _______________________________________________________________________ - * | | | | | | | | | - * | | | | | IDLE | 16 | JAM | UNDER | - * |________|________|________|________|________|________|________|________| - * - */ - -/* XMTCSR Transmit Command Register (write) enables interrupts when written - * - * _______________________________________________________________________ - * | | | | | | | | | - * | | | | | | | | | - * |________|________|________|________|________|________|________|________| - * - */ - -#define EDLC_IDLE 0x08 /* transmit idle */ -#define EDLC_16 0x04 /* packet experienced 16 collisions */ -#define EDLC_JAM 0x02 /* packet experienced a collision */ -#define EDLC_UNDER 0x01 /* data underflow */ - -/* RCVCSR Receive Status Register (read) - * - * _______________________________________________________________________ - * | | | | | | | | | - * | STALE | | GOOD | ANY | SHORT | DRIBBLE| FCS | OVER | - * |________|________|________|________|________|________|________|________| - * - */ - -/* RCVCSR Receive Command Register (write) enables interrupt when written - * - * _______________________________________________________________________ - * | | | | | | | | | - * | ADDR MATCH MODE | GOOD | ANY | SHORT | DRIBBLE| FCS | OVER | - * |________|________|________|________|________|________|________|________| - * - */ - -#define EDLC_STALE 0x80 /* receive CSR status previously read */ -#define EDLC_GOOD 0x20 /* well formed packets only */ -#define EDLC_ANY 0x10 /* any packet, even those with errors */ -#define EDLC_SHORT 0x08 /* short frame */ -#define EDLC_DRIBBLE 0x04 /* dribble error */ -#define EDLC_FCS 0x02 /* CRC error */ -#define EDLC_OVER 0x01 /* data overflow */ - -/* Address Match Mode */ - -#define EDLC_NONE 0x00 /* match mode in bits 5-6, write only */ -#define EDLC_ALL 0x40 /* promiscuous receive, write only */ -#define EDLC_BROAD 0x80 /* station address plus broadcast */ -#define EDLC_MULTI 0xc0 /* station address plus multicast */ - -/* Packet Buffer size */ - -#define BFRSIZ 2048 - -#define NAT3C501 1 -#define ETHER_ADD_SIZE 6 /* size of a MAC address */ - -#ifndef TRUE -#define TRUE 1 -#endif TRUE -#define HZ 100 - -#define DSF_LOCK 1 -#define DSF_RUNNING 2 - -#define MOD_ENAL 1 -#define MOD_PROM 2 -- cgit v1.2.3