From 73f9546026a251b5c305822aa2f081b1f437a27d Mon Sep 17 00:00:00 2001 From: Thomas Bushnell Date: Mon, 26 Apr 1999 05:38:39 +0000 Subject: 1999-04-12 OKUJI Yoshinori * i386/linux/Drivers.in: Fix the source paths for `asm' symbolic links. Reported by KONISHI Toru . 1999-03-01 OKUJI Yoshinori * i386/linux/Drivers.in: Fix linking paths. * i386/linux/Makefile.in: Corrent include paths and fix Drivers.macros location. 1999-02-28 OKUJI Yoshinori * Makefile.in (clean): Don't move device-drivers.h, because it is not in the top directory any longer. (distclean): Remove config.cache and config.log. * i386/Makefile.in (distclean): Remove config.status, config.log and Makefile. * i386/linux/Makefile.in (distclean): Remove config.status, config.log, Makefile and device-drivers.h. 1999-02-27 OKUJI Yoshinori * i386/linux/Drivers.in: Don't link dev/include/asm-i386 to dev/include/asm. Check if directories already exist before mkdir_p's. Link directories manually, because AC_LINK_FILES is weak in linking files from non-current directories. * i386/i386at/i386at_ds_routines.c: Include instead of . * device/ds_routines.c [LINUX_DEV]: Likewise. * i386/linux/Makefile.in (linux-gen-flags): Fix an extra slash. (distclean): Remove asm links. * linux/src/COPYING: Copied from linux-2.0.36. 1999-02-27 OKUJI Yoshinori * Makefile.in: Omit to detect if com or lpr is used, and don't use linux.o. (objfiles): Add $(systype)/sysdep.o. (clean): Chain the target to $(systype). (distclean): Likewise. (mostlyclean): Likewise. (maintainer-clean): Likewise. (install-headers): Likewise. (install-kernel): Likewise. * configure.in: AC_CONFIG_SUBDIRS ${systype} instead of linux. (--disable-linuxdev): Deleted. (--disable-com): Likewise. (--enable-lpr): Likewise. * i386/Makefile.in: New file. * i386/configure.in: Likewise. * i386/Makefrag (DEFINES): Add -DLINUX_DEV. (objfiles): Always add com.o. If MACH_LPR is defined, then add lpr.o. * linux/Drivers.in: Moved to ... * i386/linux/Drivers.in: ... here. Include ../../aclocal.m4. (mkdir_p): New function to create the linux include dirs. * linux/Makefile.in: Moved to ... * i386/linux/Makefile.in: ... here, and modify so that paths are valid. (clean): New target. (distclean): Likewise. (mostlyclean): Likewise. (maintainer-clean): Likewise. * linux/src/include/linux/autoconf.h: Removed. * linux/dev/include/linux/autoconf.h: Moved to ... * i386/linux/dev/include/linux/autoconf.h: ... here. * linux/dev/arch/i386/linux_emul.h: Moved to ... * i386/linux/dev/include/linux_emul.h: ... here. * linux/device-drivers.h.in: Moved to ... * i386/linux/device-drivers.h.in: ... here. * linux/aclocal.m4: Removed. * linux/configure: Likewise. --- i386/linux/Drivers.in | 233 +++ i386/linux/Makefile.in | 207 +++ i386/linux/configure | 3581 ++++++++++++++++++++++++++++++++++++++++ i386/linux/device-drivers.h.in | 85 + 4 files changed, 4106 insertions(+) create mode 100644 i386/linux/Drivers.in create mode 100644 i386/linux/Makefile.in create mode 100755 i386/linux/configure create mode 100644 i386/linux/device-drivers.h.in diff --git a/i386/linux/Drivers.in b/i386/linux/Drivers.in new file mode 100644 index 0000000..c7f9903 --- /dev/null +++ b/i386/linux/Drivers.in @@ -0,0 +1,233 @@ +dnl Device driver options for i386 +dnl Copyright 1997, 1999 Free Software Foundation, Inc. + +dnl Permission to use, copy, modify and distribute this software and its +dnl documentation is hereby granted, provided that both the copyright +dnl notice and this permission notice appear in all copies of the +dnl software, derivative works or modified versions, and any portions +dnl thereof, and that both notices appear in supporting documentation. +dnl +dnl THE FREE SOFTWARE FOUNDATION ALLOWS FREE USE OF THIS SOFTWARE IN ITS +dnl "AS IS" CONDITION. THE FREE SOFTWARE FOUNDATION DISCLAIMS ANY +dnl LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE +dnl USE OF THIS SOFTWARE. + +AC_INIT(dev/include/linux/autoconf.h) +AC_PREREQ(2.12) + +sinclude([../../Drivers.macros]) +sinclude([../../aclocal.m4]) + +AC_CONFIG_HEADER(device-drivers.h) + +dnl Check the cpu type. + +AC_CANONICAL_HOST + +case "$host_cpu" in +i386) AC_DEFINE(CONFIG_M386) + AC_DEFINE(CPU, 386) ;; +i486) AC_DEFINE(CONFIG_M486) + AC_DEFINE(CPU, 486) ;; +i586) AC_DEFINE(CONFIG_M586) + AC_DEFINE(CPU, 586) ;; +i686) AC_DEFINE(CONFIG_M686) + AC_DEFINE(CPU, 686) ;; +*) AC_DEFINE(CONFIG_M486) + AC_DEFINE(CPU, 486) ;; +esac + + +case "$host_cpu" in +i[[3456]]86) systype=i386 ;; +esac + +AC_SUBST(systype) + +AC_CHECK_TOOL(CC, gcc) +AC_PROG_CC_LOCAL + +AC_CHECK_TOOL(LD, ld) + + +dnl XXX: Autoconf is weak in linking files from non-current directories. +dnl So I hardcode the following shell script. + +mkdir_p () +{ + if test ! -d `dirname $1`; then + mkdir_p `dirname $1` + fi + mkdir $1; +} + +if test ! -d ../../linux/src/include; then + mkdir_p ../../linux/src/include +fi +if test ! -d ../../linux/dev/include; then + mkdir_p ../../linux/dev/include +fi + +ln -sf ../../../i386/linux/${srcdir}/../../linux/src/include/asm-${systype} \ + ../../linux/src/include/asm +ln -sf ../../../i386/linux/${srcdir}/../../linux/dev/include/asm-${systype} \ + ../../linux/dev/include/asm + + +dnl Aliases have to come first. + +AC_DRIVER_ALIAS(3c501, el1) +AC_DRIVER_ALIAS(3c503, el2) +AC_DRIVER_ALIAS(3c509, el3) +AC_DRIVER_ALIAS(3c579, el3) +AC_DRIVER_ALIAS(3c59x, vortex) +AC_DRIVER_ALIAS(3c90x, vortex) +AC_DRIVER_ALIAS(hpj2577, hp100) +AC_DRIVER_ALIAS(hpj2573, hp100) +AC_DRIVER_ALIAS(hpj2585, hp100) +AC_DRIVER_ALIAS(hp27248b, hp100) +AC_DRIVER_ALIAS(eth32, eth16i) +AC_DRIVER_ALIAS(znote, znet) +AC_DRIVER_ALIAS(de100, depca) +AC_DRIVER_ALIAS(de101, depca) +AC_DRIVER_ALIAS(de200, depca) +AC_DRIVER_ALIAS(de201, depca) +AC_DRIVER_ALIAS(de202, depca) +AC_DRIVER_ALIAS(de210, depca) +AC_DRIVER_ALIAS(de422, depca) +AC_DRIVER_ALIAS(de203, ewrk3) +AC_DRIVER_ALIAS(de204, ewrk3) +AC_DRIVER_ALIAS(de205, ewrk3) +AC_DRIVER_ALIAS(de425, de4x5) +AC_DRIVER_ALIAS(de434, de4x5) +AC_DRIVER_ALIAS(de435, de4x5) +AC_DRIVER_ALIAS(de450, de4x5) +AC_DRIVER_ALIAS(de500, de4x5) +AC_DRIVER_ALIAS(3c507, el16) +AC_DRIVER_ALIAS(3c505, elplus) +AC_DRIVER_ALIAS(ne1000, ne2000) +AC_DRIVER_ALIAS(at1500, lance) +AC_DRIVER_ALIAS(ne2100, lance) +AC_DRIVER_ALIAS(tulip, elcp) +AC_DRIVER_ALIAS(rtl8129, rtl8139) +AC_DRIVER_ALIAS(aha2825, aha152x) +AC_DRIVER_ALIAS(ncr53c400, ncr5380) +AC_DRIVER_ALIAS(t128f, t128) +AC_DRIVER_ALIAS(t228, t128) +AC_DRIVER_ALIAS(am79c974, am53c974) +AC_DRIVER_ALIAS(dtc3180, dtc3280) +AC_DRIVER_ALIAS(dc390u, dc390w) +AC_DRIVER_ALIAS(dc390f, dc390w) +AC_DRIVER_ALIAS(dc390, dc390t) +AC_DRIVER_ALIAS(epic100, epic) + + +dnl Kinds of drivers that have gobs of source files that get brought in. + +AC_DRIVER_CLASS(scsi, CONFIG_SCSI, constants.o hosts.o scsi.o scsi_ioctl.o scsi_proc.o scsicam.o sd.o sd_ioctl.o sr.o sr_ioctl.o) + +AC_DRIVER_CLASS(net, CONFIG_INET, auto_irq.o net.o Space.o dev.o net_init.o) + +dnl Strictly speaking, we could have a `linux' option too, but it's +dnl not possible to built a useful kernel without at least one Linux +dnl driver, so that's not really necessary. + + + +dnl non-SCSI Disk controllers + +AC_DRIVER(floppy, CONFIG_BLK_DEV_FD, floppy.o) +AC_DRIVER(ide, CONFIG_BLK_DEV_IDE, cmd640.o ide-cd.o ide.o rz1000.o triton.o) + + +dnl SCSI Disk controllers + +AC_DRIVER(advansys, CONFIG_SCSI_ADVANSYS, advansys.o, scsi) +AC_DRIVER(buslogic, CONFIG_SCSI_BUSLOGIC, BusLogic.o, scsi) +AC_DRIVER(u1434f, CONFIG_SCSI_U14_34F, u14-34f.o, scsi) +AC_DRIVER(ultrastor, CONFIG_SCSI_ULTRASTOR, ultrastor.o, scsi) +AC_DRIVER(aha152x, CONFIG_SCSI_AHA152X, aha152x.o, scsi) +AC_DRIVER(aha1542, CONFIG_SCSI_AHA1542, aha1542.o, scsi) +AC_DRIVER(aha1740, CONFIG_SCSI_AHA1740, aha1740.o, scsi) +AC_DRIVER(aic7xxx, CONFIG_SCSI_AIC7XXX, aic7xxx.o, scsi) +AC_DRIVER(futuredomain, CONFIG_SCSI_FUTURE_DOMAIN, fdomain.o, scsi) +AC_DRIVER(in2000, CONFIG_SCSI_IN2000, in2000.o, scsi) +AC_DRIVER(ncr5380, CONFIG_SCSI_GENERIC_NCR5380, g_NCR5380.o, scsi) +AC_DRIVER(ncr53c406a, CONFIG_SCSI_NCR53C406A, NCR53c406a.o, scsi) +AC_DRIVER(pas16, CONFIG_SCSI_PASS16, pas16.o, scsi) +AC_DRIVER(seagate, CONFIG_SCSI_SEAGATE, seagate.o, scsi) +AC_DRIVER(t128, CONFIG_SCSI_T128, t128.o, scsi) +AC_DRIVER(ncr53c7xx, CONFIG_SCSI_NCR53C7xx, 53c78xx.o, scsi) +AC_DRIVER(eatadma, CONFIG_SCSI_EATA_DMA, eata_dma.o, scsi) +AC_DRIVER(eatapio, CONFIG_SCSI_EATA_PIO, eata_pio.o, scsi) +AC_DRIVER(wd7000, CONFIG_SCSI_7000FASST, wd7000.o, scsi) +AC_DRIVER(eata, CONFIG_SCSI_EATA, eata.o, scsi) +AC_DRIVER(am53c974, CONFIG_SCSI_AM53C974, AM53C974.o, scsi) +AC_DRIVER(dtc3280, CONFIG_SCSI_DTC3280, dtc.o, scsi) +AC_DRIVER(ncr53c8xx, CONFIG_SCSI_NCR53C8XX, ncr53c8xx.o, scsi) +AC_DRIVER(dc390w, CONFIG_SCSI_DC390W, tmscsiw.o, scsi) +AC_DRIVER(dc390t, CONFIG_SCSI_DC390T, tmscsim.o, scsi) +AC_DRIVER(ppa, CONFIG_SCSI_PPA, ppa.o, scsi) +AC_DRIVER(qlogicfas, CONFIG_SCSI_QLOGIC_FAS, qlogicfas.o, scsi) +AC_DRIVER(qlogicisp, CONFIG_SCSI_QLOGIC_ISP, qlogicisp.o, scsi) +AC_DRIVER(gdth, CONFIG_SCSI_GDTH, gdth.o, scsi) + + +dnl Dirty implementation... + +AC_ARG_ENABLE(flashpoint,,[ +if test ${enableval} = no; then + AC_DEFINE(CONFIG_SCSI_OMIT_FLASHPOINT) +fi +]) + + +dnl Ethernet controllers + +AC_DRIVER(ne2000, CONFIG_NE2000, ne.o 8390.o, net) +AC_DRIVER(el2, CONFIG_EL2, 3c503.o 8390.o, net) +AC_DRIVER(el3, CONFIG_EL3, 3c509.o, net) +AC_DRIVER(wd80x3, CONFIG_WD80x3, wd.o 8390.o, net) +AC_DRIVER(el1, CONFIG_EL1, 3c501.o, net) +AC_DRIVER(ul, CONFIG_ULTRA, smc-ultra.o 8390.o, net) +AC_DRIVER(ul32, CONFIG_ULTRA32, smc-ultra32.o 8390.o, net) +AC_DRIVER(hplanplus, CONFIG_HPLAN_PLUS, hp-plus.o 8390.o, net) +AC_DRIVER(hplan, CONFIG_HPLAN, hp.o 8390.o, net) +AC_DRIVER(vortex, CONFIG_VORTEX, 3c59x.o, net) +AC_DRIVER(seeq8005, CONFIG_SEEQ8005, seeq8005.o, net) +AC_DRIVER(hp100, CONFIG_HP100, hp100.o, net) +AC_DRIVER(ac3200, CONFIG_AC3200, ac3200.o 8390.o, net) +AC_DRIVER(e2100, CONFIG_E2100, e2100.o 8390.o, net) +AC_DRIVER(at1700, CONFIG_AT1700, at1700.o, net) +AC_DRIVER(eth16i, CONFIG_ETH16I, eth16i.o, net) +AC_DRIVER(znet, CONFIG_ZNET, znet.o, net) +AC_DRIVER(eexpress, CONFIG_EEXPRESS, eexpress.o, net) +AC_DRIVER(eexpresspro, CONFIG_EEXPRESS_PRO, eepro.o, net) +AC_DRIVER(eexpresspro100, CONFIG_EEXPRESS_PRO100B, eepro100.o, net) +AC_DRIVER(depca, CONFIG_DEPCA, depca.o, net) +AC_DRIVER(ewrk3, CONFIG_EWRK3, ewrk3.o, net) +AC_DRIVER(de4x5, CONFIG_DE4X5, de4x5.o, net) +AC_DRIVER(apricot, CONFIG_APRICOT, apricot.o, net) +AC_DRIVER(wavelan, CONFIG_WAVELAN, wavelan.o, net) +AC_DRIVER(el16, CONFIG_EL16, 3c507.o, net) +AC_DRIVER(elplus, CONFIG_ELPLUS, 3c505.o, net) +AC_DRIVER(de600, CONFIG_DE600, de600.o, net) +AC_DRIVER(de620, CONFIG_DE620, de620.o, net) +AC_DRIVER(skg16, CONFIG_SK_G16, sk_g16.o, net) +AC_DRIVER(ni52, CONFIG_NI52, ni52.o, net) +AC_DRIVER(ni65, CONFIG_NI65, ni65.o, net) +AC_DRIVER(atp, CONFIG_ATP, atp.o, net) +AC_DRIVER(lance, CONFIG_LANCE, lance.o, net) +AC_DRIVER(elcp, CONFIG_DEC_ELCP, tulip.o, net) +AC_DRIVER(fmv18x, CONFIG_FMV18X, fmv18x.o, net) +AC_DRIVER(3c515, CONFIG_3C515, 3c515.o, net) +AC_DRIVER(pcnet32, CONFIG_PCNET32, pcnet32.o, net) +AC_DRIVER(ne2kpci, CONFIG_NE2K_PCI, ne2k-pci.o 8390.o, net) +AC_DRIVER(yellowfin, CONFIG_YELLOWFIN, yellowfin.o, net) +AC_DRIVER(rtl8139, CONFIG_RTL8139, rtl8139.o, net) +AC_DRIVER(epic, CONFIG_EPIC, epic100.o, net) +AC_DRIVER(tlan, CONFIG_TLAN, tlan.o, net) +AC_DRIVER(viarhine, CONFIG_VIA_RHINE, via-rhine.o, net) + + +AC_OUTPUT(Makefile) diff --git a/i386/linux/Makefile.in b/i386/linux/Makefile.in new file mode 100644 index 0000000..cdcabb3 --- /dev/null +++ b/i386/linux/Makefile.in @@ -0,0 +1,207 @@ +# Makefile for Linux device drivers and the glue codes. +# Copyright 1998, 1999 Free Software Foundation, Inc. +# +# Permission to use, copy, modify and distribute this software and its +# documentation is hereby granted, provided that both the copyright +# notice and this permission notice appear in all copies of the +# software, derivative works or modified versions, and any portions +# thereof, and that both notices appear in supporting documentation. +# +# THE FREE SOFTWARE FOUNDATION ALLOWS FREE USE OF THIS SOFTWARE IN ITS +# "AS IS" CONDITION. THE FREE SOFTWARE FOUNDATION DISCLAIMS ANY +# LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE +# USE OF THIS SOFTWARE. + + +# Variables from `configure'. +srcdir=@srcdir@ +systype=@systype@ +device_drivers=@device_drivers@ + +sysdep=$(srcdir)/.. +linuxdir=../../linux +linuxsrcdir=$(srcdir)/$(linuxdir) + +# Programs found by configure. +CC = @CC@ +LD = @LD@ + +CFLAGS = @CFLAGS@ + + + +# Files for driver support. +linux-c-files = version.c softirq.c dma.c resource.c printk.c \ + bios32.c irq.c ctype.c vsprintf.c main.c misc.c sched.c \ + kmem.c block.c setup.c + +# `dev' directory contains modified and glue source files. +vpath %.c $(linuxsrcdir)/dev/kernel +vpath %.c $(linuxsrcdir)/dev/init +vpath %.c $(linuxsrcdir)/dev/arch/$(systype)/kernel +vpath %.c $(linuxsrcdir)/dev/glue +vpath %.c $(linuxsrcdir)/dev/lib + +# `src' directory contains original Linux source files. +vpath %.c $(linuxsrcdir)/src/kernel +vpath %.c $(linuxsrcdir)/src/init +vpath %.c $(linuxsrcdir)/src/arch/$(systype)/kernel +vpath %.c $(linuxsrcdir)/src/lib + + +# XXX: Assembly source files must be treated separately... Uggg... +linux-asm-files = delay.S semaphore.S +vpath %.S $(linuxsrcdir)/dev/arch/$(systype)/lib +vpath %.S $(linuxsrcdir)/src/arch/$(systype)/lib + + +# Linux device drivers. +linux-block-files = cmd640.c floppy.c genhd.c ide-cd.c ide.c rz1000.c triton.c +vpath %.c $(linuxsrcdir)/dev/drivers/block +vpath %.c $(linuxsrcdir)/src/drivers/block + +linux-net-files = auto_irq.c 3c501.c 3c503.c 3c505.c 3c507.c 3c509.c \ + 3c59x.c 3c515.c 8390.c Space.c ac3200.c apricot.c at1700.c atp.c \ + de4x5.c de600.c de620.c depca.c dev.c e2100.c eepro.c eepro100.c \ + eexpress.c epic100.c eth16i.c ewrk3.c fmv18x.c hp-plus.c hp.c hp100.c \ + lance.c ne.c ne2k-pci.c net_init.c ni52.c ni65.c pcnet32.c rtl8139.c \ + seeq8005.c sk_g16.c smc-ultra.c smc-ultra32.c tlan.c tulip.c \ + via-rhine.c wavelan.c wd.c yellowfin.c znet.c net.c +vpath %.c $(linuxsrcdir)/dev/drivers/net +vpath %.c $(linuxsrcdir)/dev/net/core +vpath %.c $(linuxsrcdir)/src/drivers/net +vpath %.c $(linuxsrcdir)/src/net/core + +linux-pci-files = pci.c +vpath %.c $(linuxsrcdir)/dev/drivers/pci +vpath %.c $(linuxsrcdir)/src/drivers/pci + +linux-scsi-files = 53c78xx.c AM53C974.c BusLogic.c NCR53c406a.c advansys.c \ + aha152x.c aha1542.c aha1740.c aic7xxx.c constants.c dtc.c eata.c \ + eata_dma.c eata_pio.c fdomain.c g_NCR5380.c gdth.c hosts.c in2000.c \ + ncr53c8xx.c pas16.c ppa.c qlogicfas.c qlogicisp.c scsi.c scsi_ioctl.c \ + scsi_proc.c scsicam.c sd.c sd_ioctl.c seagate.c sr.c sr_ioctl.c \ + t128.c tmscsim.c tmscsiw.c u14-34f.c ultrastor.c wd7000.c +vpath %.c $(linuxsrcdir)/dev/drivers/scsi +vpath %.c $(linuxsrcdir)/src/drivers/scsi + + +all-linux-files = $(linux-c-files) $(linux-block-files) \ + $(linux-net-files) $(linux-pci-files) $(linux-scsi-files) + +# These are always used. +linux-objs := $(subst .c,.o, $(linux-c-files) $(linux-pci-files)) genhd.o +linux-objs += $(subst .S,.o, $(linux-asm-files)) + +# These files need special flags for compilation; each one will +# have a variable like wd7000.c-linux-flags with those flags. +CFLAGS += $($(> $@; \ + done + for i in $(linux-block-files); do \ + echo $$i-linux-flags \ + '= $$(linux-gen-flags) $$(linux-block-flags)' >> $@; \ + done + for i in $(linux-net-files); do \ + echo $$i-linux-flags \ + '= $$(linux-gen-flags) $$(linux-net-flags)' >> $@; \ + done + for i in $(linux-pci-files); do \ + echo $$i-linux-flags \ + '= $$(linux-gen-flags) $$(linux-pci-flags)' >> $@; \ + done + for i in $(linux-scsi-files); do \ + echo $$i-linux-flags \ + '= $$(linux-gen-flags) $$(linux-scsi-flags)' >> $@; \ + done + for i in $(linux-asm-files); do \ + echo $$i-linux-flags '= $$(linux-asm-spec-flags)' >> $@; \ + done + echo 'linux-flags-done='$(all-linux-files) $(linux-asm-files) >> $@ + +# If we haven't included `linux-flags' properly, then don't try and build +# .d files. +ifneq ($(linux-flags-done),$(all-linux-files) $(linux-asm-files)) +no_deps=t +endif + +linux-objs += $(sort $(device_drivers)) + + + +# Autoconf support + +$(srcdir)/configure: $(srcdir)/Drivers.in $(srcdir)/../../Drivers.macros + cd $(srcdir) && rm -f configure && autoconf Drivers.in > configure + +device-drivers.h: $(srcdir)/Makefile.in config.status + ./config.status + +config.status: $(srcdir)/configure + ./config.status --recheck + +vpath %.in $(srcdir) +vpath configure $(srcdir) + + + +# Create a linuxdev object file. +all: linux.o + +linux.o: $(linux-objs) $(srcdir)/configure + rm -f $@ + $(LD) -r -o $@ $(linux-objs) + +clean: + rm -f $(linux-objs) linux.o + +distclean: clean + rm -f $(linuxdir)/src/include/asm $(linuxdir)/dev/include/asm + rm -f config.status config.log Makefile device-drivers.h + +mostlyclean: distclean + +maintainer-clean: mostlyclean + rm -f $(srcdir)/configure diff --git a/i386/linux/configure b/i386/linux/configure new file mode 100755 index 0000000..bdd7e12 --- /dev/null +++ b/i386/linux/configure @@ -0,0 +1,3581 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.14.1 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" +ac_help="$ac_help +" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.14.1" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=dev/include/linux/autoconf.h + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + test -f "$cache_file" && . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:811: checking host system type" >&5 +if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then + +# Make sure we can run config.sub. + if $ac_config_sub sun4 >/dev/null 2>&1; then : + else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } + fi + + ac_cv_host_alias=$host + case "$ac_cv_host_alias" in + NONE) + case $nonopt in + NONE) + if ac_cv_host_alias=`$ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) ac_cv_host_alias=$nonopt ;; + esac ;; + esac + + ac_cv_host=`$ac_config_sub $ac_cv_host_alias` + ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` + ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` + ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +else + echo $ac_n "(cached) $ac_c" 1>&6 +fi + +echo "$ac_t""$ac_cv_host" 1>&6 + +host=$ac_cv_host +host_alias=$ac_cv_host_alias +host_cpu=$ac_cv_host_cpu +host_vendor=$ac_cv_host_vendor +host_os=$ac_cv_host_os + + + + + +case "$host_cpu" in +i386) cat >> confdefs.h <<\EOF +#define CONFIG_M386 1 +EOF + + cat >> confdefs.h <<\EOF +#define CPU 386 +EOF + ;; +i486) cat >> confdefs.h <<\EOF +#define CONFIG_M486 1 +EOF + + cat >> confdefs.h <<\EOF +#define CPU 486 +EOF + ;; +i586) cat >> confdefs.h <<\EOF +#define CONFIG_M586 1 +EOF + + cat >> confdefs.h <<\EOF +#define CPU 586 +EOF + ;; +i686) cat >> confdefs.h <<\EOF +#define CONFIG_M686 1 +EOF + + cat >> confdefs.h <<\EOF +#define CPU 686 +EOF + ;; +*) cat >> confdefs.h <<\EOF +#define CONFIG_M486 1 +EOF + + cat >> confdefs.h <<\EOF +#define CPU 486 +EOF + ;; +esac + + +case "$host_cpu" in +i[3456]86) systype=i386 ;; +esac + + + + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:903: checking build system type" >&5 +if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then + +# Make sure we can run config.sub. + if $ac_config_sub sun4 >/dev/null 2>&1; then : + else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } + fi + + ac_cv_build_alias=$build + case "$ac_cv_build_alias" in + NONE) + case $nonopt in + NONE) + ac_cv_build_alias=$host_alias ;; + + *) ac_cv_build_alias=$nonopt ;; + esac ;; + esac + + ac_cv_build=`$ac_config_sub $ac_cv_build_alias` + ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` + ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` + ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +else + echo $ac_n "(cached) $ac_c" 1>&6 +fi + +echo "$ac_t""$ac_cv_build" 1>&6 + +build=$ac_cv_build +build_alias=$ac_cv_build_alias +build_cpu=$ac_cv_build_cpu +build_vendor=$ac_cv_build_vendor +build_os=$ac_cv_build_os + + + + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:950: checking for $ac_word" >&5 +if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="gcc" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:982: checking for $ac_word" >&5 +if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1012: checking for $ac_word" >&5 +if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1061: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 1072 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:1077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + cross_linkable=no + ac_cv_prog_cc_cross=yes + # AC_MSG_ERROR([installation or configuration problem: C compiler cannot create executables.]) +else + cross_linkable=yes +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1107: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 + +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1113: checking whether we are using GNU C" >&5 +if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + else + # Add "-O" to both the CC and CPP commands, to eliminate possible confusion + # that results from __OPTIMIZE__ being defined for CC but not CPP. + if echo "$CC " | grep ' -O[1-9 ]' > /dev/null 2>&1; then + : # already optimizing + else + CC="$CC -O" + ac_cv_prog_CC="$CC" + fi + fi +else + GCC= +fi + + +# Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args. +set dummy ${ac_tool_prefix}ld; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1156: checking for $ac_word" >&5 +if eval "test \"\${ac_cv_prog_LD+set}\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LD"; then + ac_cv_prog_LD="$LD" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LD="${ac_tool_prefix}ld" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_LD" && ac_cv_prog_LD="ld" +fi +fi +LD="$ac_cv_prog_LD" +if test -n "$LD"; then + echo "$ac_t""$LD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + + + + +mkdir_p () +{ + if test ! -d `dirname $1`; then + mkdir_p `dirname $1` + fi + mkdir $1; +} + +if test ! -d ../../linux/src/include; then + mkdir_p ../../linux/src/include +fi +if test ! -d ../../linux/dev/include; then + mkdir_p ../../linux/dev/include +fi + +ln -sf ../../../i386/linux/${srcdir}/../../linux/src/include/asm-${systype} \ + ../../linux/src/include/asm +ln -sf ../../../i386/linux/${srcdir}/../../linux/dev/include/asm-${systype} \ + ../../linux/dev/include/asm + + + + +# Checking for alias 3c501 +# Check whether --enable-3c501 or --disable-3c501 was given. +if test "${enable_3c501+set}" = set; then + enableval="$enable_3c501" + enable_el1="$enable_3c501" + +fi + + +# Checking for alias 3c503 +# Check whether --enable-3c503 or --disable-3c503 was given. +if test "${enable_3c503+set}" = set; then + enableval="$enable_3c503" + enable_el2="$enable_3c503" + +fi + + +# Checking for alias 3c509 +# Check whether --enable-3c509 or --disable-3c509 was given. +if test "${enable_3c509+set}" = set; then + enableval="$enable_3c509" + enable_el3="$enable_3c509" + +fi + + +# Checking for alias 3c579 +# Check whether --enable-3c579 or --disable-3c579 was given. +if test "${enable_3c579+set}" = set; then + enableval="$enable_3c579" + enable_el3="$enable_3c579" + +fi + + +# Checking for alias 3c59x +# Check whether --enable-3c59x or --disable-3c59x was given. +if test "${enable_3c59x+set}" = set; then + enableval="$enable_3c59x" + enable_vortex="$enable_3c59x" + +fi + + +# Checking for alias 3c90x +# Check whether --enable-3c90x or --disable-3c90x was given. +if test "${enable_3c90x+set}" = set; then + enableval="$enable_3c90x" + enable_vortex="$enable_3c90x" + +fi + + +# Checking for alias hpj2577 +# Check whether --enable-hpj2577 or --disable-hpj2577 was given. +if test "${enable_hpj2577+set}" = set; then + enableval="$enable_hpj2577" + enable_hp100="$enable_hpj2577" + +fi + + +# Checking for alias hpj2573 +# Check whether --enable-hpj2573 or --disable-hpj2573 was given. +if test "${enable_hpj2573+set}" = set; then + enableval="$enable_hpj2573" + enable_hp100="$enable_hpj2573" + +fi + + +# Checking for alias hpj2585 +# Check whether --enable-hpj2585 or --disable-hpj2585 was given. +if test "${enable_hpj2585+set}" = set; then + enableval="$enable_hpj2585" + enable_hp100="$enable_hpj2585" + +fi + + +# Checking for alias hp27248b +# Check whether --enable-hp27248b or --disable-hp27248b was given. +if test "${enable_hp27248b+set}" = set; then + enableval="$enable_hp27248b" + enable_hp100="$enable_hp27248b" + +fi + + +# Checking for alias eth32 +# Check whether --enable-eth32 or --disable-eth32 was given. +if test "${enable_eth32+set}" = set; then + enableval="$enable_eth32" + enable_eth16i="$enable_eth32" + +fi + + +# Checking for alias znote +# Check whether --enable-znote or --disable-znote was given. +if test "${enable_znote+set}" = set; then + enableval="$enable_znote" + enable_znet="$enable_znote" + +fi + + +# Checking for alias de100 +# Check whether --enable-de100 or --disable-de100 was given. +if test "${enable_de100+set}" = set; then + enableval="$enable_de100" + enable_depca="$enable_de100" + +fi + + +# Checking for alias de101 +# Check whether --enable-de101 or --disable-de101 was given. +if test "${enable_de101+set}" = set; then + enableval="$enable_de101" + enable_depca="$enable_de101" + +fi + + +# Checking for alias de200 +# Check whether --enable-de200 or --disable-de200 was given. +if test "${enable_de200+set}" = set; then + enableval="$enable_de200" + enable_depca="$enable_de200" + +fi + + +# Checking for alias de201 +# Check whether --enable-de201 or --disable-de201 was given. +if test "${enable_de201+set}" = set; then + enableval="$enable_de201" + enable_depca="$enable_de201" + +fi + + +# Checking for alias de202 +# Check whether --enable-de202 or --disable-de202 was given. +if test "${enable_de202+set}" = set; then + enableval="$enable_de202" + enable_depca="$enable_de202" + +fi + + +# Checking for alias de210 +# Check whether --enable-de210 or --disable-de210 was given. +if test "${enable_de210+set}" = set; then + enableval="$enable_de210" + enable_depca="$enable_de210" + +fi + + +# Checking for alias de422 +# Check whether --enable-de422 or --disable-de422 was given. +if test "${enable_de422+set}" = set; then + enableval="$enable_de422" + enable_depca="$enable_de422" + +fi + + +# Checking for alias de203 +# Check whether --enable-de203 or --disable-de203 was given. +if test "${enable_de203+set}" = set; then + enableval="$enable_de203" + enable_ewrk3="$enable_de203" + +fi + + +# Checking for alias de204 +# Check whether --enable-de204 or --disable-de204 was given. +if test "${enable_de204+set}" = set; then + enableval="$enable_de204" + enable_ewrk3="$enable_de204" + +fi + + +# Checking for alias de205 +# Check whether --enable-de205 or --disable-de205 was given. +if test "${enable_de205+set}" = set; then + enableval="$enable_de205" + enable_ewrk3="$enable_de205" + +fi + + +# Checking for alias de425 +# Check whether --enable-de425 or --disable-de425 was given. +if test "${enable_de425+set}" = set; then + enableval="$enable_de425" + enable_de4x5="$enable_de425" + +fi + + +# Checking for alias de434 +# Check whether --enable-de434 or --disable-de434 was given. +if test "${enable_de434+set}" = set; then + enableval="$enable_de434" + enable_de4x5="$enable_de434" + +fi + + +# Checking for alias de435 +# Check whether --enable-de435 or --disable-de435 was given. +if test "${enable_de435+set}" = set; then + enableval="$enable_de435" + enable_de4x5="$enable_de435" + +fi + + +# Checking for alias de450 +# Check whether --enable-de450 or --disable-de450 was given. +if test "${enable_de450+set}" = set; then + enableval="$enable_de450" + enable_de4x5="$enable_de450" + +fi + + +# Checking for alias de500 +# Check whether --enable-de500 or --disable-de500 was given. +if test "${enable_de500+set}" = set; then + enableval="$enable_de500" + enable_de4x5="$enable_de500" + +fi + + +# Checking for alias 3c507 +# Check whether --enable-3c507 or --disable-3c507 was given. +if test "${enable_3c507+set}" = set; then + enableval="$enable_3c507" + enable_el16="$enable_3c507" + +fi + + +# Checking for alias 3c505 +# Check whether --enable-3c505 or --disable-3c505 was given. +if test "${enable_3c505+set}" = set; then + enableval="$enable_3c505" + enable_elplus="$enable_3c505" + +fi + + +# Checking for alias ne1000 +# Check whether --enable-ne1000 or --disable-ne1000 was given. +if test "${enable_ne1000+set}" = set; then + enableval="$enable_ne1000" + enable_ne2000="$enable_ne1000" + +fi + + +# Checking for alias at1500 +# Check whether --enable-at1500 or --disable-at1500 was given. +if test "${enable_at1500+set}" = set; then + enableval="$enable_at1500" + enable_lance="$enable_at1500" + +fi + + +# Checking for alias ne2100 +# Check whether --enable-ne2100 or --disable-ne2100 was given. +if test "${enable_ne2100+set}" = set; then + enableval="$enable_ne2100" + enable_lance="$enable_ne2100" + +fi + + +# Checking for alias tulip +# Check whether --enable-tulip or --disable-tulip was given. +if test "${enable_tulip+set}" = set; then + enableval="$enable_tulip" + enable_elcp="$enable_tulip" + +fi + + +# Checking for alias rtl8129 +# Check whether --enable-rtl8129 or --disable-rtl8129 was given. +if test "${enable_rtl8129+set}" = set; then + enableval="$enable_rtl8129" + enable_rtl8139="$enable_rtl8129" + +fi + + +# Checking for alias aha2825 +# Check whether --enable-aha2825 or --disable-aha2825 was given. +if test "${enable_aha2825+set}" = set; then + enableval="$enable_aha2825" + enable_aha152x="$enable_aha2825" + +fi + + +# Checking for alias ncr53c400 +# Check whether --enable-ncr53c400 or --disable-ncr53c400 was given. +if test "${enable_ncr53c400+set}" = set; then + enableval="$enable_ncr53c400" + enable_ncr5380="$enable_ncr53c400" + +fi + + +# Checking for alias t128f +# Check whether --enable-t128f or --disable-t128f was given. +if test "${enable_t128f+set}" = set; then + enableval="$enable_t128f" + enable_t128="$enable_t128f" + +fi + + +# Checking for alias t228 +# Check whether --enable-t228 or --disable-t228 was given. +if test "${enable_t228+set}" = set; then + enableval="$enable_t228" + enable_t128="$enable_t228" + +fi + + +# Checking for alias am79c974 +# Check whether --enable-am79c974 or --disable-am79c974 was given. +if test "${enable_am79c974+set}" = set; then + enableval="$enable_am79c974" + enable_am53c974="$enable_am79c974" + +fi + + +# Checking for alias dtc3180 +# Check whether --enable-dtc3180 or --disable-dtc3180 was given. +if test "${enable_dtc3180+set}" = set; then + enableval="$enable_dtc3180" + enable_dtc3280="$enable_dtc3180" + +fi + + +# Checking for alias dc390u +# Check whether --enable-dc390u or --disable-dc390u was given. +if test "${enable_dc390u+set}" = set; then + enableval="$enable_dc390u" + enable_dc390w="$enable_dc390u" + +fi + + +# Checking for alias dc390f +# Check whether --enable-dc390f or --disable-dc390f was given. +if test "${enable_dc390f+set}" = set; then + enableval="$enable_dc390f" + enable_dc390w="$enable_dc390f" + +fi + + +# Checking for alias dc390 +# Check whether --enable-dc390 or --disable-dc390 was given. +if test "${enable_dc390+set}" = set; then + enableval="$enable_dc390" + enable_dc390t="$enable_dc390" + +fi + + +# Checking for alias epic100 +# Check whether --enable-epic100 or --disable-epic100 was given. +if test "${enable_epic100+set}" = set; then + enableval="$enable_epic100" + enable_epic="$enable_epic100" + +fi + + + + + +driver_class_scsi_option=CONFIG_SCSI +driver_class_scsi_files="constants.o hosts.o scsi.o scsi_ioctl.o scsi_proc.o scsicam.o sd.o sd_ioctl.o sr.o sr_ioctl.o" + + + +driver_class_net_option=CONFIG_INET +driver_class_net_files="auto_irq.o net.o Space.o dev.o net_init.o" + + + + + + + +# Checking for device driver option floppy +# Check whether --enable-floppy or --disable-floppy was given. +if test "${enable_floppy+set}" = set; then + enableval="$enable_floppy" + cat >> confdefs.h <<\EOF +#define CONFIG_BLK_DEV_FD 1 +EOF + +device_drivers="$device_drivers floppy.o" +if test "${driver_class__selected+set}" != set; then + driver_class__selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_BLK_DEV_IDE 1 +EOF + +device_drivers="$device_drivers cmd640.o ide-cd.o ide.o rz1000.o triton.o" +if test "${driver_class__selected+set}" != set; then + driver_class__selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_ADVANSYS 1 +EOF + +device_drivers="$device_drivers advansys.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_BUSLOGIC 1 +EOF + +device_drivers="$device_drivers BusLogic.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_U14_34F 1 +EOF + +device_drivers="$device_drivers u14-34f.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_ULTRASTOR 1 +EOF + +device_drivers="$device_drivers ultrastor.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_AHA152X 1 +EOF + +device_drivers="$device_drivers aha152x.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_AHA1542 1 +EOF + +device_drivers="$device_drivers aha1542.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_AHA1740 1 +EOF + +device_drivers="$device_drivers aha1740.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_AIC7XXX 1 +EOF + +device_drivers="$device_drivers aic7xxx.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_FUTURE_DOMAIN 1 +EOF + +device_drivers="$device_drivers fdomain.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_IN2000 1 +EOF + +device_drivers="$device_drivers in2000.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_GENERIC_NCR5380 1 +EOF + +device_drivers="$device_drivers g_NCR5380.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_NCR53C406A 1 +EOF + +device_drivers="$device_drivers NCR53c406a.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_PASS16 1 +EOF + +device_drivers="$device_drivers pas16.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_SEAGATE 1 +EOF + +device_drivers="$device_drivers seagate.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_T128 1 +EOF + +device_drivers="$device_drivers t128.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_NCR53C7xx 1 +EOF + +device_drivers="$device_drivers 53c78xx.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_EATA_DMA 1 +EOF + +device_drivers="$device_drivers eata_dma.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_EATA_PIO 1 +EOF + +device_drivers="$device_drivers eata_pio.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_7000FASST 1 +EOF + +device_drivers="$device_drivers wd7000.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_EATA 1 +EOF + +device_drivers="$device_drivers eata.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_AM53C974 1 +EOF + +device_drivers="$device_drivers AM53C974.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_DTC3280 1 +EOF + +device_drivers="$device_drivers dtc.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_NCR53C8XX 1 +EOF + +device_drivers="$device_drivers ncr53c8xx.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_DC390W 1 +EOF + +device_drivers="$device_drivers tmscsiw.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_DC390T 1 +EOF + +device_drivers="$device_drivers tmscsim.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_PPA 1 +EOF + +device_drivers="$device_drivers ppa.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_QLOGIC_FAS 1 +EOF + +device_drivers="$device_drivers qlogicfas.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_QLOGIC_ISP 1 +EOF + +device_drivers="$device_drivers qlogicisp.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_GDTH 1 +EOF + +device_drivers="$device_drivers gdth.o" +if test "${driver_class_scsi_selected+set}" != set; then + driver_class_scsi_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SCSI_OMIT_FLASHPOINT 1 +EOF + +fi + +fi + + + + + +# Checking for device driver option ne2000 +# Check whether --enable-ne2000 or --disable-ne2000 was given. +if test "${enable_ne2000+set}" = set; then + enableval="$enable_ne2000" + cat >> confdefs.h <<\EOF +#define CONFIG_NE2000 1 +EOF + +device_drivers="$device_drivers ne.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EL2 1 +EOF + +device_drivers="$device_drivers 3c503.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EL3 1 +EOF + +device_drivers="$device_drivers 3c509.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_WD80x3 1 +EOF + +device_drivers="$device_drivers wd.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EL1 1 +EOF + +device_drivers="$device_drivers 3c501.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ULTRA 1 +EOF + +device_drivers="$device_drivers smc-ultra.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ULTRA32 1 +EOF + +device_drivers="$device_drivers smc-ultra32.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_HPLAN_PLUS 1 +EOF + +device_drivers="$device_drivers hp-plus.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_HPLAN 1 +EOF + +device_drivers="$device_drivers hp.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_VORTEX 1 +EOF + +device_drivers="$device_drivers 3c59x.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SEEQ8005 1 +EOF + +device_drivers="$device_drivers seeq8005.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_HP100 1 +EOF + +device_drivers="$device_drivers hp100.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_AC3200 1 +EOF + +device_drivers="$device_drivers ac3200.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_E2100 1 +EOF + +device_drivers="$device_drivers e2100.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_AT1700 1 +EOF + +device_drivers="$device_drivers at1700.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ETH16I 1 +EOF + +device_drivers="$device_drivers eth16i.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ZNET 1 +EOF + +device_drivers="$device_drivers znet.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EEXPRESS 1 +EOF + +device_drivers="$device_drivers eexpress.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EEXPRESS_PRO 1 +EOF + +device_drivers="$device_drivers eepro.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EEXPRESS_PRO100B 1 +EOF + +device_drivers="$device_drivers eepro100.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_DEPCA 1 +EOF + +device_drivers="$device_drivers depca.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EWRK3 1 +EOF + +device_drivers="$device_drivers ewrk3.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_DE4X5 1 +EOF + +device_drivers="$device_drivers de4x5.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_APRICOT 1 +EOF + +device_drivers="$device_drivers apricot.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_WAVELAN 1 +EOF + +device_drivers="$device_drivers wavelan.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EL16 1 +EOF + +device_drivers="$device_drivers 3c507.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ELPLUS 1 +EOF + +device_drivers="$device_drivers 3c505.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_DE600 1 +EOF + +device_drivers="$device_drivers de600.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_DE620 1 +EOF + +device_drivers="$device_drivers de620.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_SK_G16 1 +EOF + +device_drivers="$device_drivers sk_g16.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_NI52 1 +EOF + +device_drivers="$device_drivers ni52.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_NI65 1 +EOF + +device_drivers="$device_drivers ni65.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_ATP 1 +EOF + +device_drivers="$device_drivers atp.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_LANCE 1 +EOF + +device_drivers="$device_drivers lance.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_DEC_ELCP 1 +EOF + +device_drivers="$device_drivers tulip.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_FMV18X 1 +EOF + +device_drivers="$device_drivers fmv18x.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_3C515 1 +EOF + +device_drivers="$device_drivers 3c515.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_PCNET32 1 +EOF + +device_drivers="$device_drivers pcnet32.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_NE2K_PCI 1 +EOF + +device_drivers="$device_drivers ne2k-pci.o 8390.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_YELLOWFIN 1 +EOF + +device_drivers="$device_drivers yellowfin.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_RTL8139 1 +EOF + +device_drivers="$device_drivers rtl8139.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_EPIC 1 +EOF + +device_drivers="$device_drivers epic100.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_TLAN 1 +EOF + +device_drivers="$device_drivers tlan.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h <> confdefs.h <<\EOF +#define CONFIG_VIA_RHINE 1 +EOF + +device_drivers="$device_drivers via-rhine.o" +if test "${driver_class_net_selected+set}" != set; then + driver_class_net_selected=yes + cat >> confdefs.h < confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.14.1" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile device-drivers.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@device_drivers@%$device_drivers%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@systype@%$systype%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@CC@%$CC%g +s%@cross_linkable@%$cross_linkable%g +s%@LD@%$LD%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1 + diff --git a/i386/linux/device-drivers.h.in b/i386/linux/device-drivers.h.in new file mode 100644 index 0000000..7cb7df8 --- /dev/null +++ b/i386/linux/device-drivers.h.in @@ -0,0 +1,85 @@ +/* All possible device drivers; must match Drivers.in. */ + +#undef CONFIG_M386 +#undef CONFIG_M486 +#undef CONFIG_M586 +#undef CONFIG_M686 +#undef CPU +#undef CONFIG_SCSI +#undef CONFIG_INET +#undef CONFIG_BLK_DEV_FD +#undef CONFIG_BLK_DEV_IDE +#undef CONFIG_SCSI_ADVANSYS +#undef CONFIG_SCSI_BUSLOGIC +#undef CONFIG_SCSI_OMIT_FLASHPOINT +#undef CONFIG_SCSI_U14_34F +#undef CONFIG_SCSI_ULTRASTOR +#undef CONFIG_SCSI_AHA152X +#undef CONFIG_SCSI_AHA1542 +#undef CONFIG_SCSI_AHA1740 +#undef CONFIG_SCSI_AIC7XXX +#undef CONFIG_SCSI_FUTURE_DOMAIN +#undef CONFIG_SCSI_IN2000 +#undef CONFIG_SCSI_GENERIC_NCR5380 +#undef CONFIG_SCSI_NCR53C406A +#undef CONFIG_SCSI_PASS16 +#undef CONFIG_SCSI_SEAGATE +#undef CONFIG_SCSI_T128 +#undef CONFIG_SCSI_NCR53C7xx +#undef CONFIG_SCSI_EATA_DMA +#undef CONFIG_SCSI_EATA_PIO +#undef CONFIG_SCSI_7000FASST +#undef CONFIG_SCSI_EATA +#undef CONFIG_SCSI_AM53C974 +#undef CONFIG_SCSI_DTC3280 +#undef CONFIG_SCSI_NCR53C8XX +#undef CONFIG_SCSI_DC390W +#undef CONFIG_SCSI_DC390T +#undef CONFIG_SCSI_PPA +#undef CONFIG_SCSI_QLOGIC_FAS +#undef CONFIG_SCSI_QLOGIC_ISP +#undef CONFIG_SCSI_GDTH +#undef CONFIG_NE2000 +#undef CONFIG_EL2 +#undef CONFIG_EL3 +#undef CONFIG_WD80x3 +#undef CONFIG_EL1 +#undef CONFIG_ULTRA +#undef CONFIG_ULTRA32 +#undef CONFIG_HPLAN_PLUS +#undef CONFIG_HPLAN +#undef CONFIG_VORTEX +#undef CONFIG_SEEQ8005 +#undef CONFIG_HP100 +#undef CONFIG_AC3200 +#undef CONFIG_E2100 +#undef CONFIG_AT1700 +#undef CONFIG_ETH16I +#undef CONFIG_ZNET +#undef CONFIG_EEXPRESS +#undef CONFIG_EEXPRESS_PRO +#undef CONFIG_EEXPRESS_PRO100B +#undef CONFIG_DEPCA +#undef CONFIG_EWRK3 +#undef CONFIG_DE4X5 +#undef CONFIG_APRICOT +#undef CONFIG_WAVELAN +#undef CONFIG_EL16 +#undef CONFIG_ELPLUS +#undef CONFIG_DE600 +#undef CONFIG_DE620 +#undef CONFIG_SK_G16 +#undef CONFIG_NI52 +#undef CONFIG_NI65 +#undef CONFIG_ATP +#undef CONFIG_LANCE +#undef CONFIG_DEC_ELCP +#undef CONFIG_FMV18X +#undef CONFIG_3C515 +#undef CONFIG_PCNET32 +#undef CONFIG_NE2K_PCI +#undef CONFIG_YELLOWFIN +#undef CONFIG_RTL8139 +#undef CONFIG_EPIC +#undef CONFIG_TLAN +#undef CONFIG_VIA_RHINE -- cgit v1.2.3